Merge tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "Media regression fixes:

   - serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due
     to an IRQ code called too early

   - other IR regression fixes at lirc and at the raw IR decoding

   - a deadlock fix at the RC nuvoton driver

   - fix another issue with DMA on stack at dw2102 driver

  There's an extra patch there that change a driver interface for the
  SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The
  patch itself is trivial, and was acked by David Arlie"

* tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure
  [media] dw2102: don't do DMA on stack
  [media] rc: protocol is not set on register for raw IR devices
  [media] rc: raw decoder for keymap protocol is not loaded on register
  [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes
  [media] lirc: fix dead lock between open and wakeup_filter
  [media] serial_ir: ensure we're ready to receive interrupts

drivers/gpu/drm/rcar-du/rcar_du_vsp.c

@@ -32,6 +32,10 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
 {
 	const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
 	struct rcar_du_device *rcdu = crtc->group->dev;
+	struct vsp1_du_lif_config cfg = {
+		.width = mode->hdisplay,
+		.height = mode->vdisplay,
+	};
 	struct rcar_du_plane_state state = {
 		.state = {
 			.crtc = &crtc->crtc,
@@ -66,12 +70,12 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
 	 */
 	crtc->group->need_restart = true;
 
-	vsp1_du_setup_lif(crtc->vsp->vsp, mode->hdisplay, mode->vdisplay);
+	vsp1_du_setup_lif(crtc->vsp->vsp, &cfg);
 }
 
 void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
 {
-	vsp1_du_setup_lif(crtc->vsp->vsp, 0, 0);
+	vsp1_du_setup_lif(crtc->vsp->vsp, NULL);
 }
 
 void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)

drivers/media/platform/vsp1/vsp1_drm.c

@@ -54,12 +54,11 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
 /**
  * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
  * @dev: the VSP device
- * @width: output frame width in pixels
- * @height: output frame height in pixels
+ * @cfg: the LIF configuration
  *
- * Configure the output part of VSP DRM pipeline for the given frame @width and
- * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
- * pads, and the LIF sink pad.
+ * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
+ * and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink
+ * and source pads, and the LIF sink pad.
  *
  * As the media bus code on the BRU source pad is conditioned by the
  * configuration of the BRU sink 0 pad, we also set up the formats on all BRU
@@ -69,8 +68,7 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
  *
  * Return 0 on success or a negative error code on failure.
  */
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
-		      unsigned int height)
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg)
 {
 	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 	struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
@@ -79,11 +77,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	unsigned int i;
 	int ret;
 
-	dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
-		__func__, width, height);
-
-	if (width == 0 || height == 0) {
-		/* Zero width or height means the CRTC is being disabled, stop
+	if (!cfg) {
+		/* NULL configuration means the CRTC is being disabled, stop
 		 * the pipeline and turn the light off.
 		 */
 		ret = vsp1_pipeline_stop(pipe);
@@ -108,6 +103,9 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 		return 0;
 	}
 
+	dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
+		__func__, cfg->width, cfg->height);
+
 	/* Configure the format at the BRU sinks and propagate it through the
 	 * pipeline.
 	 */
@@ -117,8 +115,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	for (i = 0; i < bru->entity.source_pad; ++i) {
 		format.pad = i;
 
-		format.format.width = width;
-		format.format.height = height;
+		format.format.width = cfg->width;
+		format.format.height = cfg->height;
 		format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
 		format.format.field = V4L2_FIELD_NONE;
 
@@ -133,8 +131,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	}
 
 	format.pad = bru->entity.source_pad;
-	format.format.width = width;
-	format.format.height = height;
+	format.format.width = cfg->width;
+	format.format.height = cfg->height;
 	format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
 	format.format.field = V4L2_FIELD_NONE;
 
@@ -180,7 +178,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	/* Verify that the format at the output of the pipeline matches the
 	 * requested frame size and media bus code.
 	 */
-	if (format.format.width != width || format.format.height != height ||
+	if (format.format.width != cfg->width ||
+	    format.format.height != cfg->height ||
 	    format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
 		dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
 		return -EPIPE;

drivers/media/rc/lirc_dev.c

@@ -436,6 +436,8 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
 		return -ERESTARTSYS;
 
 	ir = irctls[iminor(inode)];
+	mutex_unlock(&lirc_dev_lock);
+
 	if (!ir) {
 		retval = -ENODEV;
 		goto error;
@@ -476,8 +478,6 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
 	}
 
 error:
-	mutex_unlock(&lirc_dev_lock);
-
 	nonseekable_open(inode, file);
 
 	return retval;

drivers/media/rc/nuvoton-cir.c

@@ -176,12 +176,13 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev,
 {
 	u8 tolerance, config;
 	struct nvt_dev *nvt = dev->priv;
+	unsigned long flags;
 	int i;
 
 	/* hardcode the tolerance to 10% */
 	tolerance = DIV_ROUND_UP(count, 10);
 
-	spin_lock(&nvt->lock);
+	spin_lock_irqsave(&nvt->lock, flags);
 
 	nvt_clear_cir_wake_fifo(nvt);
 	nvt_cir_wake_reg_write(nvt, count, CIR_WAKE_FIFO_CMP_DEEP);
@@ -203,7 +204,7 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev,
 
 	nvt_cir_wake_reg_write(nvt, config, CIR_WAKE_IRCON);
 
-	spin_unlock(&nvt->lock);
+	spin_unlock_irqrestore(&nvt->lock, flags);
 }
 
 static ssize_t wakeup_data_show(struct device *dev,

drivers/media/rc/rc-main.c

@@ -1663,6 +1663,7 @@ static int rc_setup_rx_device(struct rc_dev *dev)
 {
 	int rc;
 	struct rc_map *rc_map;
+	u64 rc_type;
 
 	if (!dev->map_name)
 		return -EINVAL;
@@ -1677,15 +1678,18 @@ static int rc_setup_rx_device(struct rc_dev *dev)
 	if (rc)
 		return rc;
 
-	if (dev->change_protocol) {
-		u64 rc_type = (1ll << rc_map->rc_type);
+	rc_type = BIT_ULL(rc_map->rc_type);
 
+	if (dev->change_protocol) {
 		rc = dev->change_protocol(dev, &rc_type);
 		if (rc < 0)
 			goto out_table;
 		dev->enabled_protocols = rc_type;
 	}
 
+	if (dev->driver_type == RC_DRIVER_IR_RAW)
+		ir_raw_load_modules(&rc_type);
+
 	set_bit(EV_KEY, dev->input_dev->evbit);
 	set_bit(EV_REP, dev->input_dev->evbit);
 	set_bit(EV_MSC, dev->input_dev->evbit);
@@ -1777,12 +1781,6 @@ int rc_register_device(struct rc_dev *dev)
 		dev->input_name ?: "Unspecified device", path ?: "N/A");
 	kfree(path);
 
-	if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
-		rc = rc_setup_rx_device(dev);
-		if (rc)
-			goto out_dev;
-	}
-
 	if (dev->driver_type == RC_DRIVER_IR_RAW ||
 	    dev->driver_type == RC_DRIVER_IR_RAW_TX) {
 		if (!raw_init) {
@@ -1791,7 +1789,13 @@ int rc_register_device(struct rc_dev *dev)
 		}
 		rc = ir_raw_event_register(dev);
 		if (rc < 0)
-			goto out_rx;
+			goto out_dev;
+	}
+
+	if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
+		rc = rc_setup_rx_device(dev);
+		if (rc)
+			goto out_raw;
 	}
 
 	/* Allow the RC sysfs nodes to be accessible */
@@ -1803,8 +1807,8 @@ int rc_register_device(struct rc_dev *dev)
 
 	return 0;
 
-out_rx:
-	rc_free_rx_device(dev);
+out_raw:
+	ir_raw_event_unregister(dev);
 out_dev:
 	device_del(&dev->dev);
 out_unlock:

drivers/media/rc/serial_ir.c

@@ -487,10 +487,69 @@ static void serial_ir_timeout(unsigned long arg)
 	ir_raw_event_handle(serial_ir.rcdev);
 }
 
+/* Needed by serial_ir_probe() */
+static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
+			unsigned int count);
+static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle);
+static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier);
+static int serial_ir_open(struct rc_dev *rcdev);
+static void serial_ir_close(struct rc_dev *rcdev);
+
 static int serial_ir_probe(struct platform_device *dev)
 {
+	struct rc_dev *rcdev;
 	int i, nlow, nhigh, result;
 
+	rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+	if (!rcdev)
+		return -ENOMEM;
+
+	if (hardware[type].send_pulse && hardware[type].send_space)
+		rcdev->tx_ir = serial_ir_tx;
+	if (hardware[type].set_send_carrier)
+		rcdev->s_tx_carrier = serial_ir_tx_carrier;
+	if (hardware[type].set_duty_cycle)
+		rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+	switch (type) {
+	case IR_HOMEBREW:
+		rcdev->input_name = "Serial IR type home-brew";
+		break;
+	case IR_IRDEO:
+		rcdev->input_name = "Serial IR type IRdeo";
+		break;
+	case IR_IRDEO_REMOTE:
+		rcdev->input_name = "Serial IR type IRdeo remote";
+		break;
+	case IR_ANIMAX:
+		rcdev->input_name = "Serial IR type AnimaX";
+		break;
+	case IR_IGOR:
+		rcdev->input_name = "Serial IR type IgorPlug";
+		break;
+	}
+
+	rcdev->input_phys = KBUILD_MODNAME "/input0";
+	rcdev->input_id.bustype = BUS_HOST;
+	rcdev->input_id.vendor = 0x0001;
+	rcdev->input_id.product = 0x0001;
+	rcdev->input_id.version = 0x0100;
+	rcdev->open = serial_ir_open;
+	rcdev->close = serial_ir_close;
+	rcdev->dev.parent = &serial_ir.pdev->dev;
+	rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+	rcdev->driver_name = KBUILD_MODNAME;
+	rcdev->map_name = RC_MAP_RC6_MCE;
+	rcdev->min_timeout = 1;
+	rcdev->timeout = IR_DEFAULT_TIMEOUT;
+	rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+	rcdev->rx_resolution = 250000;
+
+	serial_ir.rcdev = rcdev;
+
+	setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+		    (unsigned long)&serial_ir);
+
 	result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
 				  share_irq ? IRQF_SHARED : 0,
 				  KBUILD_MODNAME, &hardware);
@@ -516,9 +575,6 @@ static int serial_ir_probe(struct platform_device *dev)
 		return -EBUSY;
 	}
 
-	setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
-		    (unsigned long)&serial_ir);
-
 	result = hardware_init_port();
 	if (result < 0)
 		return result;
@@ -552,7 +608,8 @@ static int serial_ir_probe(struct platform_device *dev)
 			 sense ? "low" : "high");
 
 	dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
-	return 0;
+
+	return devm_rc_register_device(&dev->dev, rcdev);
 }
 
 static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +780,6 @@ static void serial_ir_exit(void)
 
 static int __init serial_ir_init_module(void)
 {
-	struct rc_dev *rcdev;
 	int result;
 
 	switch (type) {
@@ -754,63 +810,9 @@ static int __init serial_ir_init_module(void)
 		sense = !!sense;
 
 	result = serial_ir_init();
-	if (result)
-		return result;
-
-	rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
-	if (!rcdev) {
-		result = -ENOMEM;
-		goto serial_cleanup;
-	}
-
-	if (hardware[type].send_pulse && hardware[type].send_space)
-		rcdev->tx_ir = serial_ir_tx;
-	if (hardware[type].set_send_carrier)
-		rcdev->s_tx_carrier = serial_ir_tx_carrier;
-	if (hardware[type].set_duty_cycle)
-		rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
-	switch (type) {
-	case IR_HOMEBREW:
-		rcdev->input_name = "Serial IR type home-brew";
-		break;
-	case IR_IRDEO:
-		rcdev->input_name = "Serial IR type IRdeo";
-		break;
-	case IR_IRDEO_REMOTE:
-		rcdev->input_name = "Serial IR type IRdeo remote";
-		break;
-	case IR_ANIMAX:
-		rcdev->input_name = "Serial IR type AnimaX";
-		break;
-	case IR_IGOR:
-		rcdev->input_name = "Serial IR type IgorPlug";
-		break;
-	}
-
-	rcdev->input_phys = KBUILD_MODNAME "/input0";
-	rcdev->input_id.bustype = BUS_HOST;
-	rcdev->input_id.vendor = 0x0001;
-	rcdev->input_id.product = 0x0001;
-	rcdev->input_id.version = 0x0100;
-	rcdev->open = serial_ir_open;
-	rcdev->close = serial_ir_close;
-	rcdev->dev.parent = &serial_ir.pdev->dev;
-	rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
-	rcdev->driver_name = KBUILD_MODNAME;
-	rcdev->map_name = RC_MAP_RC6_MCE;
-	rcdev->min_timeout = 1;
-	rcdev->timeout = IR_DEFAULT_TIMEOUT;
-	rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
-	rcdev->rx_resolution = 250000;
-
-	serial_ir.rcdev = rcdev;
-
-	result = rc_register_device(rcdev);
-
 	if (!result)
 		return 0;
-serial_cleanup:
+
 	serial_ir_exit();
 	return result;
 }
@@ -818,7 +820,6 @@ serial_cleanup:
 static void __exit serial_ir_exit_module(void)
 {
 	del_timer_sync(&serial_ir.timeout_timer);
-	rc_unregister_device(serial_ir.rcdev);
 	serial_ir_exit();
 }
 

drivers/media/usb/dvb-usb/dw2102.c

@@ -68,6 +68,7 @@
 struct dw2102_state {
 	u8 initialized;
 	u8 last_lock;
+	u8 data[MAX_XFER_SIZE + 4];
 	struct i2c_client *i2c_client_demod;
 	struct i2c_client *i2c_client_tuner;
 
@@ -661,62 +662,72 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 								int num)
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	u8 obuf[0x40], ibuf[0x40];
+	struct dw2102_state *state;
 
 	if (!d)
 		return -ENODEV;
+
+	state = d->priv;
+
 	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 		return -EAGAIN;
+	if (mutex_lock_interruptible(&d->data_mutex) < 0) {
+		mutex_unlock(&d->i2c_mutex);
+		return -EAGAIN;
+	}
 
 	switch (num) {
 	case 1:
 		switch (msg[0].addr) {
 		case SU3000_STREAM_CTRL:
-			obuf[0] = msg[0].buf[0] + 0x36;
-			obuf[1] = 3;
-			obuf[2] = 0;
-			if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0)
+			state->data[0] = msg[0].buf[0] + 0x36;
+			state->data[1] = 3;
+			state->data[2] = 0;
+			if (dvb_usb_generic_rw(d, state->data, 3,
+					state->data, 0, 0) < 0)
 				err("i2c transfer failed.");
 			break;
 		case DW2102_RC_QUERY:
-			obuf[0] = 0x10;
-			if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0)
+			state->data[0] = 0x10;
+			if (dvb_usb_generic_rw(d, state->data, 1,
+					state->data, 2, 0) < 0)
 				err("i2c transfer failed.");
-			msg[0].buf[1] = ibuf[0];
-			msg[0].buf[0] = ibuf[1];
+			msg[0].buf[1] = state->data[0];
+			msg[0].buf[0] = state->data[1];
 			break;
 		default:
 			/* always i2c write*/
-			obuf[0] = 0x08;
-			obuf[1] = msg[0].addr;
-			obuf[2] = msg[0].len;
+			state->data[0] = 0x08;
+			state->data[1] = msg[0].addr;
+			state->data[2] = msg[0].len;
 
-			memcpy(&obuf[3], msg[0].buf, msg[0].len);
+			memcpy(&state->data[3], msg[0].buf, msg[0].len);
 
-			if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3,
-						ibuf, 1, 0) < 0)
+			if (dvb_usb_generic_rw(d, state->data, msg[0].len + 3,
+						state->data, 1, 0) < 0)
 				err("i2c transfer failed.");
 
 		}
 		break;
 	case 2:
 		/* always i2c read */
-		obuf[0] = 0x09;
-		obuf[1] = msg[0].len;
-		obuf[2] = msg[1].len;
-		obuf[3] = msg[0].addr;
-		memcpy(&obuf[4], msg[0].buf, msg[0].len);
-
-		if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4,
-					ibuf, msg[1].len + 1, 0) < 0)
+		state->data[0] = 0x09;
+		state->data[1] = msg[0].len;
+		state->data[2] = msg[1].len;
+		state->data[3] = msg[0].addr;
+		memcpy(&state->data[4], msg[0].buf, msg[0].len);
+
+		if (dvb_usb_generic_rw(d, state->data, msg[0].len + 4,
+					state->data, msg[1].len + 1, 0) < 0)
 			err("i2c transfer failed.");
 
-		memcpy(msg[1].buf, &ibuf[1], msg[1].len);
+		memcpy(msg[1].buf, &state->data[1], msg[1].len);
 		break;
 	default:
 		warn("more than 2 i2c messages at a time is not handled yet.");
 		break;
 	}
+	mutex_unlock(&d->data_mutex);
 	mutex_unlock(&d->i2c_mutex);
 	return num;
 }
@@ -844,17 +855,23 @@ static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 static int su3000_power_ctrl(struct dvb_usb_device *d, int i)
 {
 	struct dw2102_state *state = (struct dw2102_state *)d->priv;
-	u8 obuf[] = {0xde, 0};
+	int ret = 0;
 
 	info("%s: %d, initialized %d", __func__, i, state->initialized);
 
 	if (i && !state->initialized) {
+		mutex_lock(&d->data_mutex);
+
+		state->data[0] = 0xde;
+		state->data[1] = 0;
+
 		state->initialized = 1;
 		/* reset board */
-		return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
+		ret = dvb_usb_generic_rw(d, state->data, 2, NULL, 0, 0);
+		mutex_unlock(&d->data_mutex);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
@@ -1309,49 +1326,57 @@ static int prof_7500_frontend_attach(struct dvb_usb_adapter *d)
 	return 0;
 }
 
-static int su3000_frontend_attach(struct dvb_usb_adapter *d)
+static int su3000_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	u8 obuf[3] = { 0xe, 0x80, 0 };
-	u8 ibuf[] = { 0 };
+	struct dvb_usb_device *d = adap->dev;
+	struct dw2102_state *state = d->priv;
+
+	mutex_lock(&d->data_mutex);
+
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 0;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x02;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x02;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 	msleep(300);
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 0;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 0;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0x51;
+	state->data[0] = 0x51;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
-	d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
-					&d->dev->i2c_adap);
-	if (d->fe_adap[0].fe == NULL)
+	mutex_unlock(&d->data_mutex);
+
+	adap->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
+					&d->i2c_adap);
+	if (adap->fe_adap[0].fe == NULL)
 		return -EIO;
 
-	if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
+	if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
 				&dw2104_ts2020_config,
-				&d->dev->i2c_adap)) {
+				&d->i2c_adap)) {
 		info("Attached DS3000/TS2020!");
 		return 0;
 	}
@@ -1360,47 +1385,55 @@ static int su3000_frontend_attach(struct dvb_usb_adapter *d)
 	return -EIO;
 }
 
-static int t220_frontend_attach(struct dvb_usb_adapter *d)
+static int t220_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	u8 obuf[3] = { 0xe, 0x87, 0 };
-	u8 ibuf[] = { 0 };
+	struct dvb_usb_device *d = adap->dev;
+	struct dw2102_state *state = d->priv;
+
+	mutex_lock(&d->data_mutex);
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	state->data[0] = 0xe;
+	state->data[1] = 0x87;
+	state->data[2] = 0x0;
+
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x86;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x86;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x80;
-	obuf[2] = 0;
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 0;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
 	msleep(50);
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x80;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0x51;
+	state->data[0] = 0x51;
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
-	d->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
-					&d->dev->i2c_adap, NULL);
-	if (d->fe_adap[0].fe != NULL) {
-		if (dvb_attach(tda18271_attach, d->fe_adap[0].fe, 0x60,
-					&d->dev->i2c_adap, &tda18271_config)) {
+	mutex_unlock(&d->data_mutex);
+
+	adap->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
+					&d->i2c_adap, NULL);
+	if (adap->fe_adap[0].fe != NULL) {
+		if (dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0x60,
+					&d->i2c_adap, &tda18271_config)) {
 			info("Attached TDA18271HD/CXD2820R!");
 			return 0;
 		}
@@ -1410,23 +1443,30 @@ static int t220_frontend_attach(struct dvb_usb_adapter *d)
 	return -EIO;
 }
 
-static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d)
+static int m88rs2000_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	u8 obuf[] = { 0x51 };
-	u8 ibuf[] = { 0 };
+	struct dvb_usb_device *d = adap->dev;
+	struct dw2102_state *state = d->priv;
+
+	mutex_lock(&d->data_mutex);
 
-	if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+	state->data[0] = 0x51;
+
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
-	d->fe_adap[0].fe = dvb_attach(m88rs2000_attach, &s421_m88rs2000_config,
-					&d->dev->i2c_adap);
+	mutex_unlock(&d->data_mutex);
 
-	if (d->fe_adap[0].fe == NULL)
+	adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach,
+					&s421_m88rs2000_config,
+					&d->i2c_adap);
+
+	if (adap->fe_adap[0].fe == NULL)
 		return -EIO;
 
-	if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
+	if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
 				&dw2104_ts2020_config,
-				&d->dev->i2c_adap)) {
+				&d->i2c_adap)) {
 		info("Attached RS2000/TS2020!");
 		return 0;
 	}
@@ -1439,44 +1479,50 @@ static int tt_s2_4600_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	struct dvb_usb_device *d = adap->dev;
 	struct dw2102_state *state = d->priv;
-	u8 obuf[3] = { 0xe, 0x80, 0 };
-	u8 ibuf[] = { 0 };
 	struct i2c_adapter *i2c_adapter;
 	struct i2c_client *client;
 	struct i2c_board_info board_info;
 	struct m88ds3103_platform_data m88ds3103_pdata = {};
 	struct ts2020_config ts2020_config = {};
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	mutex_lock(&d->data_mutex);
+
+	state->data[0] = 0xe;
+	state->data[1] = 0x80;
+	state->data[2] = 0x0;
+
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x02;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x02;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 	msleep(300);
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 0;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 0;
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0xe;
-	obuf[1] = 0x83;
-	obuf[2] = 1;
+	state->data[0] = 0xe;
+	state->data[1] = 0x83;
+	state->data[2] = 1;
 
-	if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
 		err("command 0x0e transfer failed.");
 
-	obuf[0] = 0x51;
+	state->data[0] = 0x51;
 
-	if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 1, 0) < 0)
+	if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
 		err("command 0x51 transfer failed.");
 
+	mutex_unlock(&d->data_mutex);
+
 	/* attach demod */
 	m88ds3103_pdata.clk = 27000000;
 	m88ds3103_pdata.i2c_wr_max = 33;

include/media/vsp1.h

@@ -20,8 +20,17 @@ struct device;
 
 int vsp1_du_init(struct device *dev);
 
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
-		      unsigned int height);
+/**
+ * struct vsp1_du_lif_config - VSP LIF configuration
+ * @width: output frame width
+ * @height: output frame height
+ */
+struct vsp1_du_lif_config {
+	unsigned int width;
+	unsigned int height;
+};
+
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg);
 
 struct vsp1_du_atomic_config {
 	u32 pixelformat;