Merge branch 'pm-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus

Documentation/kernel-parameters.txt

@@ -2175,11 +2175,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	reset_devices	[KNL] Force drivers to reset the underlying device
 			during initialization.
 
-	resource_alloc_from_bottom
-			Allocate new resources from the beginning of available
-			space, not the end.  If you need to use this, please
-			report a bug.
-
 	resume=		[SWSUSP]
 			Specify the partition device for software suspend
 

Documentation/power/runtime_pm.txt

@@ -379,8 +379,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       zero)
 
   bool pm_runtime_suspended(struct device *dev);
-    - return true if the device's runtime PM status is 'suspended', or false
-      otherwise
+    - return true if the device's runtime PM status is 'suspended' and its
+      'power.disable_depth' field is equal to zero, or false otherwise
 
   void pm_runtime_allow(struct device *dev);
     - set the power.runtime_auto flag for the device and decrease its usage

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/mach-at91/Makefile

@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o
 
 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o

arch/arm/mach-at91/board-pcontrol-g20.c

@@ -31,6 +31,7 @@
 
 #include <mach/board.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
@@ -38,11 +39,7 @@
 
 static void __init pcontrol_g20_map_io(void)
 {
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
-	at91_register_uart(0, 0, 0);
+	stamp9g20_map_io();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void)
 
 	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
 	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 
@@ -66,38 +60,6 @@ static void __init init_irq(void)
 }
 
 
-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 3,
-};
-
 static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.ncs_read_setup		= 16,
 	.nrd_setup		= 18,
@@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.tdf_cycles		= 1,
 } };
 
-static void __init add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &nand_smc_config);
-	at91_add_device_nand(&nand_data);
-}
-
-
 static void __init add_device_pcontrol(void)
 {
 	/* configure chip-select 4 (IO compatible to 8051  X4 ) */
@@ -155,23 +109,6 @@ static void __init add_device_pcontrol(void)
 }
 
 
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-	},
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.wire4		= 1,
-};
-#endif
-
-
 /*
  * USB Host port
  */
@@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
 };
 
 
-/*
- * Dallas 1-Wire  DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
-	.pin		= AT91_PIN_PA29,
-	.is_open_drain	= 1,
-};
-
-static struct platform_device w1_device = {
-	.name			= "w1-gpio",
-	.id			= -1,
-	.dev.platform_data	= &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
-	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
-	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
-	platform_device_register(&w1_device);
-}
-
-
 static void __init pcontrol_g20_board_init(void)
 {
-	at91_add_device_serial();
-	add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
+	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_eth(&macb_data);
 	at91_add_device_i2c(pcontrol_g20_i2c_devices,
 		ARRAY_SIZE(pcontrol_g20_i2c_devices));
-	add_wire1();
 	add_device_pcontrol();
 	at91_add_device_spi(pcontrol_g20_spi_devices,
 		ARRAY_SIZE(pcontrol_g20_spi_devices));

arch/arm/mach-at91/board-stamp9g20.c

@@ -32,7 +32,7 @@
 #include "generic.h"
 
 
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void)
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+	stamp9g20_map_io();
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+	stamp9g20_map_io();
+
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
 						| ATMEL_UART_DTR | ATMEL_UART_DSR
@@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void)
 
 	/* USART5 on ttyS6. (Rx, Tx only) */
 	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static void __init init_irq(void)
@@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = {
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };
 
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
 	.vbus_pin	= AT91_PIN_PA22,
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };
@@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = {
 	}
 };
 
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
 	{
 		.name			= "D8",
 		.gpio			= AT91_PIN_PB18,
@@ -250,7 +248,7 @@ void add_w1(void)
 }
 
 
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
 {
 	/* Serial */
 	at91_add_device_serial();
@@ -262,34 +260,40 @@ static void __init generic_board_init(void)
 #else
 	at91_add_device_mmc(0, &mmc_data);
 #endif
-	/* USB Host */
-	at91_add_device_usbh(&usbh_data);
-	/* Ethernet */
-	at91_add_device_eth(&macb_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
 	/* W1 */
 	add_w1();
 }
 
 static void __init portuxg20_board_init(void)
 {
-	generic_board_init();
-	/* SPI */
-	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&portuxg20_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* SPI */
+	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
 	/* LEDs */
 	at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
 }
 
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
 {
-	generic_board_init();
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
-	at91_add_device_udc(&stamp9g20_udc_data);
+	at91_add_device_udc(&stamp9g20evb_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
 	/* LEDs */
-	at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+	at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
 }
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
@@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= stamp9g20_map_io,
+	.map_io		= stamp9g20evb_map_io,
 	.init_irq	= init_irq,
-	.init_machine	= stamp9g20_board_init,
+	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END

arch/arm/mach-at91/clock.c

@@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
 	/* Now set uhpck values */
 	uhpck.parent = &utmi_clk;
 	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz = utmi_clk.rate_hz;
 	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 

arch/arm/mach-at91/include/mach/stamp9g20.h

@@ -0,0 +1,7 @@
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif

arch/arm/mach-omap2/control.c

@@ -239,9 +239,19 @@ void omap3_save_scratchpad_contents(void)
 	struct omap3_scratchpad_prcm_block prcm_block_contents;
 	struct omap3_scratchpad_sdrc_block sdrc_block_contents;
 
-	/* Populate the Scratchpad contents */
+	/*
+	 * Populate the Scratchpad contents
+	 *
+	 * The "get_*restore_pointer" functions are used to provide a
+	 * physical restore address where the ROM code jumps while waking
+	 * up from MPU OFF/OSWR state.
+	 * The restore pointer is stored into the scratchpad.
+	 */
 	scratchpad_contents.boot_config_ptr = 0x0;
-	if (omap_rev() != OMAP3430_REV_ES3_0 &&
+	if (cpu_is_omap3630())
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_omap3630_restore_pointer());
+	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
 					omap_rev() != OMAP3430_REV_ES3_1)
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(get_restore_pointer());
@@ -474,4 +484,12 @@ void omap3_control_restore_context(void)
 	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
 	return;
 }
+
+void omap3630_ctrl_disable_rta(void)
+{
+	if (!cpu_is_omap3630())
+		return;
+	omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
+}
+
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */

arch/arm/mach-omap2/control.h

@@ -204,6 +204,10 @@
 #define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
 #define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
 
+/* 36xx-only RTA - Retention till Accesss control registers and bits */
+#define OMAP36XX_CONTROL_MEM_RTA_CTRL	0x40C
+#define OMAP36XX_RTA_DISABLE		0x0
+
 /* 34xx D2D idle-related pins, handled by PM core */
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
@@ -270,6 +274,8 @@
 #define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
 #define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
 #define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
+#define OMAP343X_SCRATCHPAD_REGADDR(reg)	OMAP2_L4_IO_ADDRESS(\
+						OMAP343X_SCRATCHPAD + reg)
 
 /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
 #define AM35XX_USBOTG_VBUSP_CLK_SHIFT   0
@@ -347,10 +353,11 @@ extern void omap3_save_scratchpad_contents(void);
 extern void omap3_clear_scratchpad_contents(void);
 extern u32 *get_restore_pointer(void);
 extern u32 *get_es3_restore_pointer(void);
+extern u32 *get_omap3630_restore_pointer(void);
 extern u32 omap3_arm_context[128];
 extern void omap3_control_save_context(void);
 extern void omap3_control_restore_context(void);
-
+extern void omap3630_ctrl_disable_rta(void);
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0

arch/arm/mach-omap2/cpuidle34xx.c

@@ -293,25 +293,26 @@ select_state:
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
 /**
- * omap3_cpuidle_update_states - Update the cpuidle states.
+ * omap3_cpuidle_update_states() - Update the cpuidle states
+ * @mpu_deepest_state:	Enable states upto and including this for mpu domain
+ * @core_deepest_state:	Enable states upto and including this for core domain
  *
- * Currently, this function toggles the validity of idle states based upon
- * the flag 'enable_off_mode'. When the flag is set all states are valid.
- * Else, states leading to OFF state set to be invalid.
+ * This goes through the list of states available and enables and disables the
+ * validity of C states based on deepest state that can be achieved for the
+ * variable domain
  */
-void omap3_cpuidle_update_states(void)
+void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state)
 {
 	int i;
 
 	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
 		struct omap3_processor_cx *cx = &omap3_power_states[i];
 
-		if (enable_off_mode) {
+		if ((cx->mpu_state >= mpu_deepest_state) &&
+		    (cx->core_state >= core_deepest_state)) {
 			cx->valid = 1;
 		} else {
-			if ((cx->mpu_state == PWRDM_POWER_OFF) ||
-				(cx->core_state	== PWRDM_POWER_OFF))
-				cx->valid = 0;
+			cx->valid = 0;
 		}
 	}
 }
@@ -452,6 +453,18 @@ void omap_init_power_states(void)
 	omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
+
+	/*
+	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
+	 * enable OFF mode in a stable form for previous revisions.
+	 * we disable C7 state as a result.
+	 */
+	if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) {
+		omap3_power_states[OMAP3_STATE_C7].valid = 0;
+		cpuidle_params_table[OMAP3_STATE_C7].valid = 0;
+		WARN_ONCE(1, "%s: core off state C7 disabled due to i583\n",
+				__func__);
+	}
 }
 
 struct cpuidle_driver omap3_idle_driver = {
@@ -504,7 +517,10 @@ int __init omap3_idle_init(void)
 		return -EINVAL;
 	dev->state_count = count;
 
-	omap3_cpuidle_update_states();
+	if (enable_off_mode)
+		omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF);
+	else
+		omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET);
 
 	if (cpuidle_register_device(dev)) {
 		printk(KERN_ERR "%s: CPUidle register device failed\n",

arch/arm/mach-omap2/pm.c

@@ -143,5 +143,5 @@ static int __init omap2_common_pm_init(void)
 
 	return 0;
 }
-device_initcall(omap2_common_pm_init);
+postcore_initcall(omap2_common_pm_init);
 

arch/arm/mach-omap2/pm.h

@@ -58,7 +58,7 @@ extern u32 sleep_while_idle;
 #endif
 
 #if defined(CONFIG_CPU_IDLE)
-extern void omap3_cpuidle_update_states(void);
+extern void omap3_cpuidle_update_states(u32, u32);
 #endif
 
 #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
@@ -80,9 +80,20 @@ extern void save_secure_ram_context(u32 *addr);
 extern void omap3_save_scratchpad_contents(void);
 
 extern unsigned int omap24xx_idle_loop_suspend_sz;
-extern unsigned int omap34xx_suspend_sz;
 extern unsigned int save_secure_ram_context_sz;
 extern unsigned int omap24xx_cpu_suspend_sz;
 extern unsigned int omap34xx_cpu_suspend_sz;
 
+#define PM_RTA_ERRATUM_i608		(1 << 0)
+#define PM_SDRC_WAKEUP_ERRATUM_i583	(1 << 1)
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+extern u16 pm34xx_errata;
+#define IS_PM34XX_ERRATUM(id)		(pm34xx_errata & (id))
+extern void enable_omap3630_toggle_l2_on_restore(void);
+#else
+#define IS_PM34XX_ERRATUM(id)		0
+static inline void enable_omap3630_toggle_l2_on_restore(void) { }
+#endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
+
 #endif

arch/arm/mach-omap2/pm24xx.c

@@ -301,14 +301,8 @@ out:
 
 static int omap2_pm_begin(suspend_state_t state)
 {
-	suspend_state = state;
-	return 0;
-}
-
-static int omap2_pm_prepare(void)
-{
-	/* We cannot sleep in idle until we have resumed */
 	disable_hlt();
+	suspend_state = state;
 	return 0;
 }
 
@@ -349,21 +343,15 @@ static int omap2_pm_enter(suspend_state_t state)
 	return ret;
 }
 
-static void omap2_pm_finish(void)
-{
-	enable_hlt();
-}
-
 static void omap2_pm_end(void)
 {
 	suspend_state = PM_SUSPEND_ON;
+	enable_hlt();
 }
 
 static struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap2_pm_begin,
-	.prepare	= omap2_pm_prepare,
 	.enter		= omap2_pm_enter,
-	.finish		= omap2_pm_finish,
 	.end		= omap2_pm_end,
 	.valid		= suspend_valid_only_mem,
 };

arch/arm/mach-omap2/pm34xx.c

@@ -68,6 +68,9 @@ static inline bool is_suspending(void)
 #define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
 #define OMAP343X_CONTROL_REG_VALUE_OFFSET  0xc8
 
+/* pm34xx errata defined in pm.h */
+u16 pm34xx_errata;
+
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
@@ -143,7 +146,7 @@ static void omap3_core_save_context(void)
 
 	/*
 	 * Force write last pad into memory, as this can fail in some
-	 * cases according to erratas 1.157, 1.185
+	 * cases according to errata 1.157, 1.185
 	 */
 	omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
 		OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
@@ -430,7 +433,7 @@ void omap_sram_idle(void)
 	/*
 	* On EMU/HS devices ROM code restores a SRDC value
 	* from scratchpad which has automatic self refresh on timeout
-	* of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
+	* of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
 	* Hence store/restore the SDRC_POWER register here.
 	*/
 	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
@@ -529,12 +532,6 @@ out:
 }
 
 #ifdef CONFIG_SUSPEND
-static int omap3_pm_prepare(void)
-{
-	disable_hlt();
-	return 0;
-}
-
 static int omap3_pm_suspend(void)
 {
 	struct power_state *pwrst;
@@ -597,14 +594,10 @@ static int omap3_pm_enter(suspend_state_t unused)
 	return ret;
 }
 
-static void omap3_pm_finish(void)
-{
-	enable_hlt();
-}
-
 /* Hooks to enable / disable UART interrupts during suspend */
 static int omap3_pm_begin(suspend_state_t state)
 {
+	disable_hlt();
 	suspend_state = state;
 	omap_uart_enable_irqs(0);
 	return 0;
@@ -614,15 +607,14 @@ static void omap3_pm_end(void)
 {
 	suspend_state = PM_SUSPEND_ON;
 	omap_uart_enable_irqs(1);
+	enable_hlt();
 	return;
 }
 
 static struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap3_pm_begin,
 	.end		= omap3_pm_end,
-	.prepare	= omap3_pm_prepare,
 	.enter		= omap3_pm_enter,
-	.finish		= omap3_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
 #endif /* CONFIG_SUSPEND */
@@ -925,12 +917,29 @@ void omap3_pm_off_mode_enable(int enable)
 		state = PWRDM_POWER_RET;
 
 #ifdef CONFIG_CPU_IDLE
-	omap3_cpuidle_update_states();
+	/*
+	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
+	 * enable OFF mode in a stable form for previous revisions, restrict
+	 * instead to RET
+	 */
+	if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
+		omap3_cpuidle_update_states(state, PWRDM_POWER_RET);
+	else
+		omap3_cpuidle_update_states(state, state);
 #endif
 
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		pwrst->next_state = state;
-		omap_set_pwrdm_state(pwrst->pwrdm, state);
+		if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
+				pwrst->pwrdm == core_pwrdm &&
+				state == PWRDM_POWER_OFF) {
+			pwrst->next_state = PWRDM_POWER_RET;
+			WARN_ONCE(1,
+				"%s: Core OFF disabled due to errata i583\n",
+				__func__);
+		} else {
+			pwrst->next_state = state;
+		}
+		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 	}
 }
 
@@ -1002,6 +1011,17 @@ void omap_push_sram_idle(void)
 				save_secure_ram_context_sz);
 }
 
+static void __init pm_errata_configure(void)
+{
+	if (cpu_is_omap3630()) {
+		pm34xx_errata |= PM_RTA_ERRATUM_i608;
+		/* Enable the l2 cache toggling in sleep logic */
+		enable_omap3630_toggle_l2_on_restore();
+		if (omap_rev() < OMAP3630_REV_ES1_2)
+			pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+	}
+}
+
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
@@ -1011,6 +1031,8 @@ static int __init omap3_pm_init(void)
 	if (!cpu_is_omap34xx())
 		return -ENODEV;
 
+	pm_errata_configure();
+
 	printk(KERN_ERR "Power Management for TI OMAP3.\n");
 
 	/* XXX prcm_setup_regs needs to be before enabling hw
@@ -1058,6 +1080,14 @@ static int __init omap3_pm_init(void)
 	pm_idle = omap3_pm_idle;
 	omap3_idle_init();
 
+	/*
+	 * RTA is disabled during initialization as per erratum i608
+	 * it is safer to disable RTA by the bootloader, but we would like
+	 * to be doubly sure here and prevent any mishaps.
+	 */
+	if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
+		omap3630_ctrl_disable_rta();
+
 	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		omap3_secure_ram_storage =

arch/arm/mach-omap2/pm44xx.c

@@ -31,12 +31,6 @@ struct power_state {
 static LIST_HEAD(pwrst_list);
 
 #ifdef CONFIG_SUSPEND
-static int omap4_pm_prepare(void)
-{
-	disable_hlt();
-	return 0;
-}
-
 static int omap4_pm_suspend(void)
 {
 	do_wfi();
@@ -59,28 +53,22 @@ static int omap4_pm_enter(suspend_state_t suspend_state)
 	return ret;
 }
 
-static void omap4_pm_finish(void)
-{
-	enable_hlt();
-	return;
-}
-
 static int omap4_pm_begin(suspend_state_t state)
 {
+	disable_hlt();
 	return 0;
 }
 
 static void omap4_pm_end(void)
 {
+	enable_hlt();
 	return;
 }
 
 static struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap4_pm_begin,
 	.end		= omap4_pm_end,
-	.prepare	= omap4_pm_prepare,
 	.enter		= omap4_pm_enter,
-	.finish		= omap4_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
 #endif /* CONFIG_SUSPEND */

arch/arm/mach-omap2/sdrc.h

@@ -74,5 +74,4 @@ static inline u32 sms_read_reg(u16 reg)
  */
 #define SDRC_MPURATE_LOOPS		96
 
-
 #endif

arch/arm/mach-omap2/sleep34xx.S

@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-omap2/sleep.S
- *
  * (C) Copyright 2007
  * Texas Instruments
  * Karthik Dasu <karthik-dp@ti.com>
@@ -26,6 +24,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <plat/sram.h>
 #include <mach/io.h>
 
 #include "cm.h"
@@ -33,21 +32,27 @@
 #include "sdrc.h"
 #include "control.h"
 
-#define SDRC_SCRATCHPAD_SEM_V	0xfa00291c
-
-#define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
-				OMAP3430_PM_PREPWSTST)
-#define PM_PREPWSTST_CORE_P	0x48306AE8
-#define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
-				OMAP3430_PM_PREPWSTST)
+/*
+ * Registers access definitions
+ */
+#define SDRC_SCRATCHPAD_SEM_OFFS	0xc
+#define SDRC_SCRATCHPAD_SEM_V	OMAP343X_SCRATCHPAD_REGADDR\
+					(SDRC_SCRATCHPAD_SEM_OFFS)
+#define PM_PREPWSTST_CORE_P	OMAP3430_PRM_BASE + CORE_MOD +\
+					OMAP3430_PM_PREPWSTST
 #define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
 #define CM_IDLEST1_CORE_V	OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
-#define SRAM_BASE_P		0x40200000
-#define CONTROL_STAT		0x480022F0
-#define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
-				       * available */
-#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
-						+ SCRATCHPAD_MEM_OFFS)
+#define CM_IDLEST_CKGEN_V	OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
+#define SRAM_BASE_P		OMAP3_SRAM_PA
+#define CONTROL_STAT		OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
+#define CONTROL_MEM_RTA_CTRL	(OMAP343X_CTRL_BASE +\
+					OMAP36XX_CONTROL_MEM_RTA_CTRL)
+
+/* Move this as correct place is available */
+#define SCRATCHPAD_MEM_OFFS	0x310
+#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE +\
+					OMAP343X_CONTROL_MEM_WKUP +\
+					SCRATCHPAD_MEM_OFFS)
 #define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
 #define SDRC_SYSCONFIG_P	(OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
 #define SDRC_MR_0_P		(OMAP343X_SDRC_BASE + SDRC_MR_0)
@@ -59,48 +64,38 @@
 #define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
-        .text
-/* Function to acquire the semaphore in scratchpad */
-ENTRY(lock_scratchpad_sem)
-	stmfd	sp!, {lr}	@ save registers on stack
-wait_sem:
-	mov	r0,#1
-	ldr	r1, sdrc_scratchpad_sem
-wait_loop:
-	ldr	r2, [r1]	@ load the lock value
-	cmp	r2, r0		@ is the lock free ?
-	beq	wait_loop	@ not free...
-	swp	r2, r0, [r1]	@ semaphore free so lock it and proceed
-	cmp	r2, r0		@ did we succeed ?
-	beq	wait_sem	@ no - try again
-	ldmfd	sp!, {pc}	@ restore regs and return
-sdrc_scratchpad_sem:
-        .word SDRC_SCRATCHPAD_SEM_V
-ENTRY(lock_scratchpad_sem_sz)
-        .word   . - lock_scratchpad_sem
-
-        .text
-/* Function to release the scratchpad semaphore */
-ENTRY(unlock_scratchpad_sem)
-	stmfd	sp!, {lr}	@ save registers on stack
-	ldr	r3, sdrc_scratchpad_sem
-	mov	r2,#0
-	str	r2,[r3]
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENTRY(unlock_scratchpad_sem_sz)
-        .word   . - unlock_scratchpad_sem
+
+/*
+ * API functions
+ */
+
+/*
+ * The "get_*restore_pointer" functions are used to provide a
+ * physical restore address where the ROM code jumps while waking
+ * up from MPU OFF/OSWR state.
+ * The restore pointer is stored into the scratchpad.
+ */
 
 	.text
 /* Function call to get the restore pointer for resume from OFF */
 ENTRY(get_restore_pointer)
-        stmfd   sp!, {lr}     @ save registers on stack
+	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore
-        ldmfd   sp!, {pc}     @ restore regs and return
+	ldmfd	sp!, {pc}	@ restore regs and return
 ENTRY(get_restore_pointer_sz)
-        .word   . - get_restore_pointer
+	.word	. - get_restore_pointer
 
 	.text
-/* Function call to get the restore pointer for for ES3 to resume from OFF */
+/* Function call to get the restore pointer for 3630 resume from OFF */
+ENTRY(get_omap3630_restore_pointer)
+	stmfd	sp!, {lr}	@ save registers on stack
+	adr	r0, restore_3630
+	ldmfd	sp!, {pc}	@ restore regs and return
+ENTRY(get_omap3630_restore_pointer_sz)
+	.word	. - get_omap3630_restore_pointer
+
+	.text
+/* Function call to get the restore pointer for ES3 to resume from OFF */
 ENTRY(get_es3_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore_es3
@@ -108,54 +103,23 @@ ENTRY(get_es3_restore_pointer)
 ENTRY(get_es3_restore_pointer_sz)
 	.word	. - get_es3_restore_pointer
 
-ENTRY(es3_sdrc_fix)
-	ldr	r4, sdrc_syscfg		@ get config addr
-	ldr	r5, [r4]		@ get value
-	tst	r5, #0x100		@ is part access blocked
-	it	eq
-	biceq	r5, r5, #0x100		@ clear bit if set
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_mr_0		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_emr2_0		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_manual_0	@ get config addr
-	mov	r5, #0x2		@ autorefresh command
-	str	r5, [r4]		@ kick off refreshes
-	ldr	r4, sdrc_mr_1		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_emr2_1		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_manual_1	@ get config addr
-	mov	r5, #0x2		@ autorefresh command
-	str	r5, [r4]		@ kick off refreshes
-	bx	lr
-sdrc_syscfg:
-	.word	SDRC_SYSCONFIG_P
-sdrc_mr_0:
-	.word	SDRC_MR_0_P
-sdrc_emr2_0:
-	.word	SDRC_EMR2_0_P
-sdrc_manual_0:
-	.word	SDRC_MANUAL_0_P
-sdrc_mr_1:
-	.word	SDRC_MR_1_P
-sdrc_emr2_1:
-	.word	SDRC_EMR2_1_P
-sdrc_manual_1:
-	.word	SDRC_MANUAL_1_P
-ENTRY(es3_sdrc_fix_sz)
-	.word	. - es3_sdrc_fix
+	.text
+/*
+ * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
+ * This function sets up a flag that will allow for this toggling to take
+ * place on 3630. Hopefully some version in the future may not need this.
+ */
+ENTRY(enable_omap3630_toggle_l2_on_restore)
+	stmfd	sp!, {lr}	@ save registers on stack
+	/* Setup so that we will disable and enable l2 */
+	mov	r1, #0x1
+	str	r1, l2dis_3630
+	ldmfd	sp!, {pc}	@ restore regs and return
 
+	.text
 /* Function to call rom code to save secure ram context */
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
-save_secure_ram_debug:
-	/* b save_secure_ram_debug */	@ enable to debug save code
 	adr	r3, api_params		@ r3 points to parameters
 	str	r0, [r3,#0x4]		@ r0 has sdram address
 	ldr	r12, high_mask
@@ -184,36 +148,163 @@ api_params:
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
+/*
+ * ======================
+ * == Idle entry point ==
+ * ======================
+ */
+
 /*
  * Forces OMAP into idle state
  *
- * omap34xx_suspend() - This bit of code just executes the WFI
- * for normal idles.
+ * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
+ * and executes the WFI instruction. Calling WFI effectively changes the
+ * power domains states to the desired target power states.
+ *
  *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- *	 wakes up it continues execution at the point it went to sleep.
+ * Notes:
+ * - this code gets copied to internal SRAM at boot and after wake-up
+ *   from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
+ * - when the OMAP wakes up it continues at different execution points
+ *   depending on the low power mode (non-OFF vs OFF modes),
+ *   cf. 'Resume path for xxx mode' comments.
  */
 ENTRY(omap34xx_cpu_suspend)
-	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
-loop:
-	/*b	loop*/	@Enable to debug by stepping through code
-	/* r0 contains restore pointer in sdram */
-	/* r1 contains information about saving context */
-	ldr     r4, sdrc_power          @ read the SDRC_POWER register
-	ldr     r5, [r4]                @ read the contents of SDRC_POWER
-	orr     r5, r5, #0x40           @ enable self refresh on idle req
-	str     r5, [r4]                @ write back to SDRC_POWER register
+	stmfd	sp!, {r0-r12, lr}	@ save registers on stack
 
+	/*
+	 * r0 contains restore pointer in sdram
+	 * r1 contains information about saving context:
+	 *   0 - No context lost
+	 *   1 - Only L1 and logic lost
+	 *   2 - Only L2 lost
+	 *   3 - Both L1 and L2 lost
+	 */
+
+	/* Directly jump to WFI is the context save is not required */
 	cmp	r1, #0x0
-	/* If context save is required, do that and execute wfi */
-	bne	save_context_wfi
+	beq	omap3_do_wfi
+
+	/* Otherwise fall through to the save context code */
+save_context_wfi:
+	mov	r8, r0			@ Store SDRAM address in r8
+	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
+	mov	r4, #0x1		@ Number of parameters for restore call
+	stmia	r8!, {r4-r5}		@ Push parameters for restore call
+	mrc	p15, 1, r5, c9, c0, 2	@ Read L2 AUX ctrl register
+	stmia	r8!, {r4-r5}		@ Push parameters for restore call
+
+        /* Check what that target sleep state is from r1 */
+	cmp	r1, #0x2		@ Only L2 lost, no need to save context
+	beq	clean_caches
+
+l1_logic_lost:
+	/* Store sp and spsr to SDRAM */
+	mov	r4, sp
+	mrs	r5, spsr
+	mov	r6, lr
+	stmia	r8!, {r4-r6}
+	/* Save all ARM registers */
+	/* Coprocessor access control register */
+	mrc	p15, 0, r6, c1, c0, 2
+	stmia	r8!, {r6}
+	/* TTBR0, TTBR1 and Translation table base control */
+	mrc	p15, 0, r4, c2, c0, 0
+	mrc	p15, 0, r5, c2, c0, 1
+	mrc	p15, 0, r6, c2, c0, 2
+	stmia	r8!, {r4-r6}
+	/*
+	 * Domain access control register, data fault status register,
+	 * and instruction fault status register
+	 */
+	mrc	p15, 0, r4, c3, c0, 0
+	mrc	p15, 0, r5, c5, c0, 0
+	mrc	p15, 0, r6, c5, c0, 1
+	stmia	r8!, {r4-r6}
+	/*
+	 * Data aux fault status register, instruction aux fault status,
+	 * data fault address register and instruction fault address register
+	 */
+	mrc	p15, 0, r4, c5, c1, 0
+	mrc	p15, 0, r5, c5, c1, 1
+	mrc	p15, 0, r6, c6, c0, 0
+	mrc	p15, 0, r7, c6, c0, 2
+	stmia	r8!, {r4-r7}
+	/*
+	 * user r/w thread and process ID, user r/o thread and process ID,
+	 * priv only thread and process ID, cache size selection
+	 */
+	mrc	p15, 0, r4, c13, c0, 2
+	mrc	p15, 0, r5, c13, c0, 3
+	mrc	p15, 0, r6, c13, c0, 4
+	mrc	p15, 2, r7, c0, c0, 0
+	stmia	r8!, {r4-r7}
+	/* Data TLB lockdown, instruction TLB lockdown registers */
+	mrc	p15, 0, r5, c10, c0, 0
+	mrc	p15, 0, r6, c10, c0, 1
+	stmia	r8!, {r5-r6}
+	/* Secure or non secure vector base address, FCSE PID, Context PID*/
+	mrc	p15, 0, r4, c12, c0, 0
+	mrc	p15, 0, r5, c13, c0, 0
+	mrc	p15, 0, r6, c13, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Primary remap, normal remap registers */
+	mrc	p15, 0, r4, c10, c2, 0
+	mrc	p15, 0, r5, c10, c2, 1
+	stmia	r8!,{r4-r5}
+
+	/* Store current cpsr*/
+	mrs	r2, cpsr
+	stmia	r8!, {r2}
+
+	mrc	p15, 0, r4, c1, c0, 0
+	/* save control register */
+	stmia	r8!, {r4}
+
+clean_caches:
+	/*
+	 * Clean Data or unified cache to POU
+	 * How to invalidate only L1 cache???? - #FIX_ME#
+	 * mcr	p15, 0, r11, c7, c11, 1
+	 */
+	cmp	r1, #0x1 		@ Check whether L2 inval is required
+	beq	omap3_do_wfi
+
+clean_l2:
+	/*
+	 * jump out to kernel flush routine
+	 *  - reuse that code is better
+	 *  - it executes in a cached space so is faster than refetch per-block
+	 *  - should be faster and will change with kernel
+	 *  - 'might' have to copy address, load and jump to it
+	 */
+	ldr	r1, kernel_flush
+	mov	lr, pc
+	bx	r1
+
+omap3_do_wfi:
+	ldr	r4, sdrc_power		@ read the SDRC_POWER register
+	ldr	r5, [r4]		@ read the contents of SDRC_POWER
+	orr	r5, r5, #0x40		@ enable self refresh on idle req
+	str	r5, [r4]		@ write back to SDRC_POWER register
+
 	/* Data memory barrier and Data sync barrier */
 	mov	r1, #0
 	mcr	p15, 0, r1, c7, c10, 4
 	mcr	p15, 0, r1, c7, c10, 5
 
+/*
+ * ===================================
+ * == WFI instruction => Enter idle ==
+ * ===================================
+ */
 	wfi				@ wait for interrupt
 
+/*
+ * ===================================
+ * == Resume path for non-OFF modes ==
+ * ===================================
+ */
 	nop
 	nop
 	nop
@@ -226,9 +317,30 @@ loop:
 	nop
 	bl wait_sdrc_ok
 
-	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+/*
+ * ===================================
+ * == Exit point from non-OFF modes ==
+ * ===================================
+ */
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+
+
+/*
+ * ==============================
+ * == Resume path for OFF mode ==
+ * ==============================
+ */
+
+/*
+ * The restore_* functions are called by the ROM code
+ *  when back from WFI in OFF mode.
+ * Cf. the get_*restore_pointer functions.
+ *
+ *  restore_es3: applies to 34xx >= ES3.0
+ *  restore_3630: applies to 36xx
+ *  restore: common code for 3xxx
+ */
 restore_es3:
-	/*b restore_es3*/		@ Enable to debug restore code
 	ldr	r5, pm_prepwstst_core_p
 	ldr	r4, [r5]
 	and	r4, r4, #0x3
@@ -245,82 +357,117 @@ copy_to_sram:
 	bne	copy_to_sram
 	ldr	r1, sram_base
 	blx	r1
+	b	restore
+
+restore_3630:
+	ldr	r1, pm_prepwstst_core_p
+	ldr	r2, [r1]
+	and	r2, r2, #0x3
+	cmp	r2, #0x0	@ Check if previous power state of CORE is OFF
+	bne	restore
+	/* Disable RTA before giving control */
+	ldr	r1, control_mem_rta
+	mov	r2, #OMAP36XX_RTA_DISABLE
+	str	r2, [r1]
+
+	/* Fall through to common code for the remaining logic */
+
 restore:
-	/* b restore*/  @ Enable to debug restore code
-        /* Check what was the reason for mpu reset and store the reason in r9*/
-        /* 1 - Only L1 and logic lost */
-        /* 2 - Only L2 lost - In this case, we wont be here */
-        /* 3 - Both L1 and L2 lost */
-	ldr     r1, pm_pwstctrl_mpu
+	/*
+	 * Check what was the reason for mpu reset and store the reason in r9:
+	 *  0 - No context lost
+	 *  1 - Only L1 and logic lost
+	 *  2 - Only L2 lost - In this case, we wont be here
+	 *  3 - Both L1 and L2 lost
+	 */
+	ldr	r1, pm_pwstctrl_mpu
 	ldr	r2, [r1]
-	and     r2, r2, #0x3
-	cmp     r2, #0x0	@ Check if target power state was OFF or RET
-        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	and	r2, r2, #0x3
+	cmp	r2, #0x0	@ Check if target power state was OFF or RET
+	moveq	r9, #0x3	@ MPU OFF => L1 and L2 lost
 	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
+
+	ldr	r0, l2dis_3630
+	cmp	r0, #0x1	@ should we disable L2 on 3630?
+	bne	skipl2dis
+	mrc	p15, 0, r0, c1, c0, 1
+	bic	r0, r0, #2	@ disable L2 cache
+	mcr	p15, 0, r0, c1, c0, 1
+skipl2dis:
 	ldr	r0, control_stat
 	ldr	r1, [r0]
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
-	mov	r0, #40		@ set service ID for PPA
-	mov	r12, r0		@ copy secure Service ID in r12
-	mov	r1, #0		@ set task id for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r0, #40			@ set service ID for PPA
+	mov	r12, r0			@ copy secure Service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 	/* Write to Aux control register to set some bits */
-	mov	r0, #42		@ set service ID for PPA
-	mov	r12, r0		@ copy secure Service ID in r12
-	mov	r1, #0		@ set task id for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r0, #42			@ set service ID for PPA
+	mov	r12, r0			@ copy secure Service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	ldr	r4, scratchpad_base
-	ldr	r3, [r4, #0xBC]	@ r3 points to parameters
+	ldr	r3, [r4, #0xBC]		@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 
 #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	/* Restore L2 aux control register */
-	@ set service ID for PPA
+					@ set service ID for PPA
 	mov	r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
-	mov	r12, r0		@ copy service ID in r12
-	mov	r1, #0		@ set task ID for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r12, r0			@ copy service ID in r12
+	mov	r1, #0			@ set task ID for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4, #0xBC]
-	adds	r3, r3, #8	@ r3 points to parameters
+	adds	r3, r3, #8		@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 #endif
 	b	logic_l1_restore
+
 l2_inv_api_params:
-	.word   0x1, 0x00
+	.word	0x1, 0x00
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
-	mov r12, #0x1                         @ set up to invalide L2
-smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
+	mov r12, #0x1			@ set up to invalidate L2
+	.word 0xE1600070		@ Call SMI monitor (smieq)
 	/* Write to Aux control register to set some bits */
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#4]
 	mov	r12, #0x3
-	.word 0xE1600070	@ Call SMI monitor (smieq)
+	.word	0xE1600070		@ Call SMI monitor (smieq)
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#12]
 	mov	r12, #0x2
-	.word 0xE1600070	@ Call SMI monitor (smieq)
+	.word	0xE1600070		@ Call SMI monitor (smieq)
 logic_l1_restore:
+	ldr	r1, l2dis_3630
+	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
+	bne	skipl2reen
+	mrc	p15, 0, r1, c1, c0, 1
+	orr	r1, r1, #2		@ re-enable L2 cache
+	mcr	p15, 0, r1, c1, c0, 1
+skipl2reen:
 	mov	r1, #0
-	/* Invalidate all instruction caches to PoU
-	 * and flush branch target cache */
+	/*
+	 * Invalidate all instruction caches to PoU
+	 * and flush branch target cache
+	 */
 	mcr	p15, 0, r1, c7, c5, 0
 
 	ldr	r4, scratchpad_base
@@ -341,33 +488,33 @@ logic_l1_restore:
 	MCR p15, 0, r6, c2, c0, 1
 	/* Translation table base control register */
 	MCR p15, 0, r7, c2, c0, 2
-	/*domain access Control Register */
+	/* Domain access Control Register */
 	MCR p15, 0, r8, c3, c0, 0
-	/* data fault status Register */
+	/* Data fault status Register */
 	MCR p15, 0, r9, c5, c0, 0
 
-	ldmia  r3!,{r4-r8}
-	/* instruction fault status Register */
+	ldmia	r3!,{r4-r8}
+	/* Instruction fault status Register */
 	MCR p15, 0, r4, c5, c0, 1
-	/*Data Auxiliary Fault Status Register */
+	/* Data Auxiliary Fault Status Register */
 	MCR p15, 0, r5, c5, c1, 0
-	/*Instruction Auxiliary Fault Status Register*/
+	/* Instruction Auxiliary Fault Status Register*/
 	MCR p15, 0, r6, c5, c1, 1
-	/*Data Fault Address Register */
+	/* Data Fault Address Register */
 	MCR p15, 0, r7, c6, c0, 0
-	/*Instruction Fault Address Register*/
+	/* Instruction Fault Address Register*/
 	MCR p15, 0, r8, c6, c0, 2
-	ldmia  r3!,{r4-r7}
+	ldmia	r3!,{r4-r7}
 
-	/* user r/w thread and process ID */
+	/* User r/w thread and process ID */
 	MCR p15, 0, r4, c13, c0, 2
-	/* user ro thread and process ID */
+	/* User ro thread and process ID */
 	MCR p15, 0, r5, c13, c0, 3
-	/*Privileged only thread and process ID */
+	/* Privileged only thread and process ID */
 	MCR p15, 0, r6, c13, c0, 4
-	/* cache size selection */
+	/* Cache size selection */
 	MCR p15, 2, r7, c0, c0, 0
-	ldmia  r3!,{r4-r8}
+	ldmia	r3!,{r4-r8}
 	/* Data TLB lockdown registers */
 	MCR p15, 0, r4, c10, c0, 0
 	/* Instruction TLB lockdown registers */
@@ -379,26 +526,27 @@ logic_l1_restore:
 	/* Context PID */
 	MCR p15, 0, r8, c13, c0, 1
 
-	ldmia  r3!,{r4-r5}
-	/* primary memory remap register */
+	ldmia	r3!,{r4-r5}
+	/* Primary memory remap register */
 	MCR p15, 0, r4, c10, c2, 0
-	/*normal memory remap register */
+	/* Normal memory remap register */
 	MCR p15, 0, r5, c10, c2, 1
 
 	/* Restore cpsr */
-	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
-	msr	cpsr, r4	/*store cpsr */
+	ldmia	r3!,{r4}		@ load CPSR from SDRAM
+	msr	cpsr, r4		@ store cpsr
 
 	/* Enabling MMU here */
-	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
-	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	mrc	p15, 0, r7, c2, c0, 2 	@ Read TTBRControl
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
 	and	r7, #0x7
 	cmp	r7, #0x0
 	beq	usettbr0
 ttbr_error:
-	/* More work needs to be done to support N[0:2] value other than 0
-	* So looping here so that the error can be detected
-	*/
+	/*
+	 * More work needs to be done to support N[0:2] value other than 0
+	 * So looping here so that the error can be detected
+	 */
 	b	ttbr_error
 usettbr0:
 	mrc	p15, 0, r2, c2, c0, 0
@@ -406,21 +554,25 @@ usettbr0:
 	and	r2, r5
 	mov	r4, pc
 	ldr	r5, table_index_mask
-	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	and	r4, r5			@ r4 = 31 to 20 bits of pc
 	/* Extract the value to be written to table entry */
 	ldr	r1, table_entry
-	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* r1 has the value to be written to table entry*/
+	add	r1, r1, r4
 	/* Getting the address of table entry to modify */
 	lsr	r4, #18
-	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* r2 has the location which needs to be modified */
+	add	r2, r4
 	/* Storing previous entry of location being modified */
 	ldr	r5, scratchpad_base
 	ldr	r4, [r2]
 	str	r4, [r5, #0xC0]
 	/* Modify the table entry */
 	str	r1, [r2]
-	/* Storing address of entry being modified
-	 * - will be restored after enabling MMU */
+	/*
+	 * Storing address of entry being modified
+	 * - will be restored after enabling MMU
+	 */
 	ldr	r5, scratchpad_base
 	str	r2, [r5, #0xC4]
 
@@ -429,8 +581,11 @@ usettbr0:
 	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
 	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
 	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
-	/* Restore control register  but dont enable caches here*/
-	/* Caches will be enabled after restoring MMU table entry */
+	/*
+	 * Restore control register. This enables the MMU.
+	 * The caches and prediction are not enabled here, they
+	 * will be enabled after restoring the MMU table entry.
+	 */
 	ldmia	r3!, {r4}
 	/* Store previous value of control register in scratchpad */
 	str	r4, [r5, #0xC8]
@@ -438,212 +593,144 @@ usettbr0:
 	and	r4, r2
 	mcr	p15, 0, r4, c1, c0, 0
 
-	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
-save_context_wfi:
-	/*b	save_context_wfi*/	@ enable to debug save code
-	mov	r8, r0 /* Store SDRAM address in r8 */
-	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
-	mov	r4, #0x1		@ Number of parameters for restore call
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-	mrc	p15, 1, r5, c9, c0, 2	@ Read L2 AUX ctrl register
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-        /* Check what that target sleep state is:stored in r1*/
-        /* 1 - Only L1 and logic lost */
-        /* 2 - Only L2 lost */
-        /* 3 - Both L1 and L2 lost */
-	cmp	r1, #0x2 /* Only L2 lost */
-	beq	clean_l2
-	cmp	r1, #0x1 /* L2 retained */
-	/* r9 stores whether to clean L2 or not*/
-	moveq	r9, #0x0 /* Dont Clean L2 */
-	movne	r9, #0x1 /* Clean L2 */
-l1_logic_lost:
-	/* Store sp and spsr to SDRAM */
-	mov	r4, sp
-	mrs	r5, spsr
-	mov	r6, lr
-	stmia	r8!, {r4-r6}
-	/* Save all ARM registers */
-	/* Coprocessor access control register */
-	mrc	p15, 0, r6, c1, c0, 2
-	stmia	r8!, {r6}
-	/* TTBR0, TTBR1 and Translation table base control */
-	mrc	p15, 0, r4, c2, c0, 0
-	mrc	p15, 0, r5, c2, c0, 1
-	mrc	p15, 0, r6, c2, c0, 2
-	stmia	r8!, {r4-r6}
-	/* Domain access control register, data fault status register,
-	and instruction fault status register */
-	mrc	p15, 0, r4, c3, c0, 0
-	mrc	p15, 0, r5, c5, c0, 0
-	mrc	p15, 0, r6, c5, c0, 1
-	stmia	r8!, {r4-r6}
-	/* Data aux fault status register, instruction aux fault status,
-	datat fault address register and instruction fault address register*/
-	mrc	p15, 0, r4, c5, c1, 0
-	mrc	p15, 0, r5, c5, c1, 1
-	mrc	p15, 0, r6, c6, c0, 0
-	mrc	p15, 0, r7, c6, c0, 2
-	stmia	r8!, {r4-r7}
-	/* user r/w thread and process ID, user r/o thread and process ID,
-	priv only thread and process ID, cache size selection */
-	mrc	p15, 0, r4, c13, c0, 2
-	mrc	p15, 0, r5, c13, c0, 3
-	mrc	p15, 0, r6, c13, c0, 4
-	mrc	p15, 2, r7, c0, c0, 0
-	stmia	r8!, {r4-r7}
-	/* Data TLB lockdown, instruction TLB lockdown registers */
-	mrc	p15, 0, r5, c10, c0, 0
-	mrc	p15, 0, r6, c10, c0, 1
-	stmia	r8!, {r5-r6}
-	/* Secure or non secure vector base address, FCSE PID, Context PID*/
-	mrc	p15, 0, r4, c12, c0, 0
-	mrc	p15, 0, r5, c13, c0, 0
-	mrc	p15, 0, r6, c13, c0, 1
-	stmia	r8!, {r4-r6}
-	/* Primary remap, normal remap registers */
-	mrc	p15, 0, r4, c10, c2, 0
-	mrc	p15, 0, r5, c10, c2, 1
-	stmia	r8!,{r4-r5}
+/*
+ * ==============================
+ * == Exit point from OFF mode ==
+ * ==============================
+ */
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
-	/* Store current cpsr*/
-	mrs	r2, cpsr
-	stmia	r8!, {r2}
 
-	mrc	p15, 0, r4, c1, c0, 0
-	/* save control register */
-	stmia	r8!, {r4}
-clean_caches:
-	/* Clean Data or unified cache to POU*/
-	/* How to invalidate only L1 cache???? - #FIX_ME# */
-	/* mcr	p15, 0, r11, c7, c11, 1 */
-	cmp	r9, #1 /* Check whether L2 inval is required or not*/
-	bne	skip_l2_inval
-clean_l2:
-	/* read clidr */
-	mrc     p15, 1, r0, c0, c0, 1
-	/* extract loc from clidr */
-	ands    r3, r0, #0x7000000
-	/* left align loc bit field */
-	mov     r3, r3, lsr #23
-	/* if loc is 0, then no need to clean */
-	beq     finished
-	/* start clean at cache level 0 */
-	mov     r10, #0
-loop1:
-	/* work out 3x current cache level */
-	add     r2, r10, r10, lsr #1
-	/* extract cache type bits from clidr*/
-	mov     r1, r0, lsr r2
-	/* mask of the bits for current cache only */
-	and     r1, r1, #7
-	/* see what cache we have at this level */
-	cmp     r1, #2
-	/* skip if no cache, or just i-cache */
-	blt     skip
-	/* select current cache level in cssr */
-	mcr     p15, 2, r10, c0, c0, 0
-	/* isb to sych the new cssr&csidr */
-	isb
-	/* read the new csidr */
-	mrc     p15, 1, r1, c0, c0, 0
-	/* extract the length of the cache lines */
-	and     r2, r1, #7
-	/* add 4 (line length offset) */
-	add     r2, r2, #4
-	ldr     r4, assoc_mask
-	/* find maximum number on the way size */
-	ands    r4, r4, r1, lsr #3
-	/* find bit position of way size increment */
-	clz     r5, r4
-	ldr     r7, numset_mask
-	/* extract max number of the index size*/
-	ands    r7, r7, r1, lsr #13
-loop2:
-	mov     r9, r4
-	/* create working copy of max way size*/
-loop3:
-	/* factor way and cache number into r11 */
-	orr     r11, r10, r9, lsl r5
-	/* factor index number into r11 */
-	orr     r11, r11, r7, lsl r2
-	/*clean & invalidate by set/way */
-	mcr     p15, 0, r11, c7, c10, 2
-	/* decrement the way*/
-	subs    r9, r9, #1
-	bge     loop3
-	/*decrement the index */
-	subs    r7, r7, #1
-	bge     loop2
-skip:
-	add     r10, r10, #2
-	/* increment cache number */
-	cmp     r3, r10
-	bgt     loop1
-finished:
-	/*swith back to cache level 0 */
-	mov     r10, #0
-	/* select current cache level in cssr */
-	mcr     p15, 2, r10, c0, c0, 0
-	isb
-skip_l2_inval:
-	/* Data memory barrier and Data sync barrier */
-	mov     r1, #0
-	mcr     p15, 0, r1, c7, c10, 4
-	mcr     p15, 0, r1, c7, c10, 5
+/*
+ * Internal functions
+ */
 
-	wfi                             @ wait for interrupt
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bl wait_sdrc_ok
-	/* restore regs and return */
-	ldmfd   sp!, {r0-r12, pc}
+/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
+	.text
+ENTRY(es3_sdrc_fix)
+	ldr	r4, sdrc_syscfg		@ get config addr
+	ldr	r5, [r4]		@ get value
+	tst	r5, #0x100		@ is part access blocked
+	it	eq
+	biceq	r5, r5, #0x100		@ clear bit if set
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_mr_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_0	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	ldr	r4, sdrc_mr_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_1	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	bx	lr
+
+sdrc_syscfg:
+	.word	SDRC_SYSCONFIG_P
+sdrc_mr_0:
+	.word	SDRC_MR_0_P
+sdrc_emr2_0:
+	.word	SDRC_EMR2_0_P
+sdrc_manual_0:
+	.word	SDRC_MANUAL_0_P
+sdrc_mr_1:
+	.word	SDRC_MR_1_P
+sdrc_emr2_1:
+	.word	SDRC_EMR2_1_P
+sdrc_manual_1:
+	.word	SDRC_MANUAL_1_P
+ENTRY(es3_sdrc_fix_sz)
+	.word	. - es3_sdrc_fix
+
+/*
+ * This function implements the erratum ID i581 WA:
+ *  SDRC state restore before accessing the SDRAM
+ *
+ * Only used at return from non-OFF mode. For OFF
+ * mode the ROM code configures the SDRC and
+ * the DPLL before calling the restore code directly
+ * from DDR.
+ */
 
 /* Make sure SDRC accesses are ok */
 wait_sdrc_ok:
-        ldr     r4, cm_idlest1_core
-        ldr     r5, [r4]
-        and     r5, r5, #0x2
-        cmp     r5, #0
-        bne     wait_sdrc_ok
-        ldr     r4, sdrc_power
-        ldr     r5, [r4]
-        bic     r5, r5, #0x40
-        str     r5, [r4]
+
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
+	ldr	r4, cm_idlest_ckgen
+wait_dpll3_lock:
+	ldr	r5, [r4]
+	tst	r5, #1
+	beq	wait_dpll3_lock
+
+	ldr	r4, cm_idlest1_core
+wait_sdrc_ready:
+	ldr	r5, [r4]
+	tst	r5, #0x2
+	bne	wait_sdrc_ready
+	/* allow DLL powerdown upon hw idle req */
+	ldr	r4, sdrc_power
+	ldr	r5, [r4]
+	bic	r5, r5, #0x40
+	str	r5, [r4]
+
+is_dll_in_lock_mode:
+	/* Is dll in lock mode? */
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	tst	r5, #0x4
+	bxne	lr			@ Return if locked
+	/* wait till dll locks */
+wait_dll_lock_timed:
+	ldr	r4, wait_dll_lock_counter
+	add	r4, r4, #1
+	str	r4, wait_dll_lock_counter
+	ldr	r4, sdrc_dlla_status
+	/* Wait 20uS for lock */
+	mov	r6, #8
 wait_dll_lock:
-        /* Is dll in lock mode? */
-        ldr     r4, sdrc_dlla_ctrl
-        ldr     r5, [r4]
-        tst     r5, #0x4
-        bxne    lr
-        /* wait till dll locks */
-        ldr     r4, sdrc_dlla_status
-        ldr     r5, [r4]
-        and     r5, r5, #0x4
-        cmp     r5, #0x4
-        bne     wait_dll_lock
-        bx      lr
+	subs	r6, r6, #0x1
+	beq	kick_dll
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	bx	lr			@ Return when locked
+
+	/* disable/reenable DLL if not locked */
+kick_dll:
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	mov	r6, r5
+	bic	r6, #(1<<3)		@ disable dll
+	str	r6, [r4]
+	dsb
+	orr	r6, r6, #(1<<3)		@ enable dll
+	str	r6, [r4]
+	dsb
+	ldr	r4, kick_counter
+	add	r4, r4, #1
+	str	r4, kick_counter
+	b	wait_dll_lock_timed
 
 cm_idlest1_core:
 	.word	CM_IDLEST1_CORE_V
+cm_idlest_ckgen:
+	.word	CM_IDLEST_CKGEN_V
 sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-pm_prepwstst_core:
-	.word	PM_PREPWSTST_CORE_V
 pm_prepwstst_core_p:
 	.word	PM_PREPWSTST_CORE_P
-pm_prepwstst_mpu:
-	.word	PM_PREPWSTST_MPU_V
 pm_pwstctrl_mpu:
 	.word	PM_PWSTCTRL_MPU_P
 scratchpad_base:
@@ -651,13 +738,7 @@ scratchpad_base:
 sram_base:
 	.word	SRAM_BASE_P + 0x8000
 sdrc_power:
-	.word SDRC_POWER_V
-clk_stabilize_delay:
-	.word 0x000001FF
-assoc_mask:
-	.word	0x3ff
-numset_mask:
-	.word	0x7fff
+	.word	SDRC_POWER_V
 ttbrbit_mask:
 	.word	0xFFFFC000
 table_index_mask:
@@ -668,5 +749,20 @@ cache_pred_disable_mask:
 	.word	0xFFFFE7FB
 control_stat:
 	.word	CONTROL_STAT
+control_mem_rta:
+	.word	CONTROL_MEM_RTA_CTRL
+kernel_flush:
+	.word	v7_flush_dcache_all
+l2dis_3630:
+	.word	0
+	/*
+	 * When exporting to userspace while the counters are in SRAM,
+	 * these 2 words need to be at the end to facilitate retrival!
+	 */
+kick_counter:
+	.word	0
+wait_dll_lock_counter:
+	.word	0
+
 ENTRY(omap34xx_cpu_suspend_sz)
 	.word	. - omap34xx_cpu_suspend

arch/arm/mach-s3c2412/Kconfig

@@ -28,9 +28,16 @@ config S3C2412_DMA
 
 config S3C2412_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs with similar sleep procedure.
+
 # Note, the S3C2412 IOtiming support is in plat-s3c24xx
 
 config S3C2412_CPUFREQ

arch/arm/mach-s3c2412/Makefile

@@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
-obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_PM)	+= pm.o
+obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
 obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support

arch/arm/mach-s3c2416/Kconfig

@@ -27,6 +27,7 @@ config S3C2416_DMA
 
 config S3C2416_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2416 power management
 

arch/arm/mach-s5pv210/mach-aquila.c

@@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = {
 static struct max8998_platform_data aquila_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(aquila_regulators),
 	.regulators	= aquila_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif
 

arch/arm/mach-s5pv210/mach-goni.c

@@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = {
 static struct max8998_platform_data goni_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(goni_regulators),
 	.regulators	= goni_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif
 

arch/arm/mach-shmobile/include/mach/entry-macro.S

@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2010 Magnus Damm
  * Copyright (C) 2008 Renesas Solutions Corp.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,24 +15,45 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#define INTCA_BASE	0xe6980000
+#define INTFLGA_OFFS	0x00000018 /* accept pending interrupt */
+#define INTEVTA_OFFS	0x00000020 /* vector number of accepted interrupt */
+#define INTLVLA_OFFS	0x00000030 /* priority level of accepted interrupt */
+#define INTLVLB_OFFS	0x00000034 /* previous priority level */
+
 	.macro  disable_fiq
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-	ldr     \base, =INTFLGA
+	ldr     \base, =INTCA_BASE
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
 
 	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr     \irqnr, [\base]
+	/* The single INTFLGA read access below results in the following:
+	 *
+	 * 1. INTLVLB is updated with old priority value from INTLVLA
+	 * 2. Highest priority interrupt is accepted
+	 * 3. INTLVLA is updated to contain priority of accepted interrupt
+	 * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
+	 */
+	ldr     \irqnr, [\base, #INTFLGA_OFFS]
+
+	/* Restore INTLVLA with the value saved in INTLVLB.
+	 * This is required to support interrupt priorities properly.
+	 */
+	ldrb	\tmp, [\base, #INTLVLB_OFFS]
+	strb    \tmp, [\base, #INTLVLA_OFFS]
+
+	/* Handle invalid vector number case */
 	cmp	\irqnr, #0
 	beq	1000f
-	/* intevt to irq number */
+
+	/* Convert vector to irq number, same as the evt2irq() macro */
 	lsr	\irqnr, \irqnr, #0x5
 	subs	\irqnr, \irqnr, #16
 

arch/arm/mach-shmobile/include/mach/vmalloc.h

@@ -2,6 +2,6 @@
 #define __ASM_MACH_VMALLOC_H
 
 /* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000
+#define VMALLOC_END 0xe6000000UL
 
 #endif /* __ASM_MACH_VMALLOC_H */

arch/arm/plat-omap/include/plat/sram.h

@@ -11,6 +11,7 @@
 #ifndef __ARCH_ARM_OMAP_SRAM_H
 #define __ARCH_ARM_OMAP_SRAM_H
 
+#ifndef __ASSEMBLY__
 extern void * omap_sram_push(void * start, unsigned long size);
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
@@ -74,4 +75,14 @@ extern void omap_push_sram_idle(void);
 static inline void omap_push_sram_idle(void) {}
 #endif /* CONFIG_PM */
 
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA		0x40200000
+#define OMAP3_SRAM_PA           0x40200000
+#define OMAP4_SRAM_PA		0x40300000
+
 #endif

arch/arm/plat-omap/sram.c

@@ -41,15 +41,12 @@
 
 #define OMAP1_SRAM_PA		0x20000000
 #define OMAP1_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PA		0x40200000
-#define OMAP2_SRAM_PUB_PA	0x4020f800
+#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
 #define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xfe400000
-#define OMAP3_SRAM_PUB_PA       0x40208000
+#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA		0x40300000
 #define OMAP4_SRAM_VA		0xfe400000
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)

arch/arm/plat-s3c24xx/Kconfig

@@ -8,7 +8,7 @@ config PLAT_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
-	select S3C_DEVICE_NAND
+	select S3C_DEV_NAND
 	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device

arch/mips/Kconfig

@@ -19,6 +19,8 @@ config MIPS
 	select GENERIC_ATOMIC64 if !64BIT
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_PROBE
 
 menu "Machine selection"
 
@@ -1664,6 +1666,28 @@ config PAGE_SIZE_64KB
 
 endchoice
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+	default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+	range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	range 11 64
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB.  Keep this in mind
+	  when choosing a value for this option.
+
 config BOARD_SCACHE
 	bool
 
@@ -1921,20 +1945,6 @@ config CPU_R4000_WORKAROUNDS
 config CPU_R4400_WORKAROUNDS
 	bool
 
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config IRQ_PER_CPU
-	bool
-
 #
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed

arch/mips/alchemy/common/platform.c

@@ -27,6 +27,7 @@
 static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 			    unsigned int old_state)
 {
+#ifdef CONFIG_SERIAL_8250
 	switch (state) {
 	case 0:
 		if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
@@ -49,6 +50,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 		serial8250_do_pm(port, state, old_state);
 		break;
 	}
+#endif
 }
 
 #define PORT(_base, _irq)					\

arch/mips/alchemy/devboards/prom.c

@@ -54,10 +54,9 @@ void __init prom_init(void)
 
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
+	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
 		memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
+
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 

arch/mips/ar7/clock.c

@@ -239,12 +239,12 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
 
 	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
-	msleep(1);
+	mdelay(1);
 	writel(4, &clock->pll);
 	while (readl(&clock->pll) & PLL_STATUS)
 		;
 	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
-	msleep(75);
+	mdelay(75);
 }
 
 static void __init tnetd7300_init_clocks(void)
@@ -456,7 +456,7 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
-int __init ar7_init_clocks(void)
+void __init ar7_init_clocks(void)
 {
 	switch (ar7_chip_id()) {
 	case AR7_CHIP_7100:
@@ -472,7 +472,4 @@ int __init ar7_init_clocks(void)
 	}
 	/* adjust vbus clock rate */
 	vbus_clk.rate = bus_clk.rate / 2;
-
-	return 0;
 }
-arch_initcall(ar7_init_clocks);

arch/mips/ar7/time.c

@@ -30,6 +30,9 @@ void __init plat_time_init(void)
 {
 	struct clk *cpu_clk;
 
+	/* Initialize ar7 clocks so the CPU clock frequency is correct */
+	ar7_init_clocks();
+
 	cpu_clk = clk_get(NULL, "cpu");
 	if (IS_ERR(cpu_clk)) {
 		printk(KERN_ERR "unable to get cpu clock\n");

arch/mips/bcm47xx/setup.c

@@ -32,7 +32,6 @@
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
 #include <asm/mach-bcm47xx/nvram.h>
 
 struct ssb_bus ssb_bcm47xx;
@@ -57,68 +56,112 @@ static void bcm47xx_machine_halt(void)
 		cpu_relax();
 }
 
-static void str2eaddr(char *str, char *dest)
-{
-	int i = 0;
+#define READ_FROM_NVRAM(_outvar, name, buf) \
+	if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+		sprom->_outvar = simple_strtoul(buf, NULL, 0);
 
-	if (str == NULL) {
-		memset(dest, 0, 6);
-		return;
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+{
+	char buf[100];
+	u32 boardflags;
+
+	memset(sprom, 0, sizeof(struct ssb_sprom));
+
+	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+	READ_FROM_NVRAM(revision, "sromrev", buf);
+	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->il0mac);
+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->et0mac);
+	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->et1mac);
+	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+	READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
+	READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
+	READ_FROM_NVRAM(board_rev, "boardrev", buf);
+	READ_FROM_NVRAM(country_code, "ccode", buf);
+	READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
+	READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
+	READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
+	READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
+	READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
+	READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
+	READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
+	READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
+	READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
+	READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
+	READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
+	READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
+	READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
+	READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
+	READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
+	READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
+	READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
+	READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
+	READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
+	READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
+	READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+	READ_FROM_NVRAM(tri2g, "tri2g", buf);
+	READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
+	READ_FROM_NVRAM(tri5g, "tri5g", buf);
+	READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+	READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
+	READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
+	READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
+	READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
+	READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
+	READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
+	READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
+	READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
+	READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
+	READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
+	READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
+	READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
+	READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
+	READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+	READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+		boardflags = simple_strtoul(buf, NULL, 0);
+		if (boardflags) {
+			sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+			sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+		}
 	}
-
-	for (;;) {
-		dest[i++] = (char) simple_strtoul(str, NULL, 16);
-		str += 2;
-		if (!*str++ || i == 6)
-			break;
+	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+		boardflags = simple_strtoul(buf, NULL, 0);
+		if (boardflags) {
+			sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+			sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+		}
 	}
 }
 
 static int bcm47xx_get_invariants(struct ssb_bus *bus,
 				   struct ssb_init_invariants *iv)
 {
-	char buf[100];
+	char buf[20];
 
 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
 
-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+	if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+		iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
+	else
+		iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
-	/* Fill sprom structure */
-	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
-	iv->sprom.revision = 3;
-
-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
-		str2eaddr(buf, iv->sprom.et0mac);
+	bcm47xx_fill_sprom(&iv->sprom);
 
-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
-		str2eaddr(buf, iv->sprom.et1mac);
-
-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-
-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-
-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-
-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
 
 	return 0;
 }
@@ -126,12 +169,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 void __init plat_mem_setup(void)
 {
 	int err;
+	char buf[100];
+	struct ssb_mipscore *mcore;
 
 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
 				      bcm47xx_get_invariants);
 	if (err)
 		panic("Failed to initialize SSB bus (err %d)\n", err);
 
+	mcore = &ssb_bcm47xx.mipscore;
+	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+		if (strstr(buf, "console=ttyS1")) {
+			struct ssb_serial_port port;
+
+			printk(KERN_DEBUG "Swapping serial ports!\n");
+			/* swap serial ports */
+			memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+			memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+			       sizeof(port));
+			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+		}
+	}
+
 	_machine_restart = bcm47xx_machine_restart;
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;

arch/mips/include/asm/cpu.h

@@ -111,8 +111,8 @@
  * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
  */
 
-#define PRID_IMP_BMIPS4KC	0x4000
-#define PRID_IMP_BMIPS32	0x8000
+#define PRID_IMP_BMIPS32_REV4	0x4000
+#define PRID_IMP_BMIPS32_REV8	0x8000
 #define PRID_IMP_BMIPS3300	0x9000
 #define PRID_IMP_BMIPS3300_ALT	0x9100
 #define PRID_IMP_BMIPS3300_BUG	0x0000

arch/mips/include/asm/elf.h

@@ -249,7 +249,8 @@ extern struct mips_abi mips_abi_n32;
 
 #define SET_PERSONALITY(ex)						\
 do {									\
-	set_personality(PER_LINUX);					\
+	if (personality(current->personality) != PER_LINUX)		\
+		set_personality(PER_LINUX);				\
 									\
 	current->thread.abi = &mips_abi;				\
 } while (0)
@@ -296,6 +297,8 @@ do {									\
 
 #define SET_PERSONALITY(ex)						\
 do {									\
+	unsigned int p;							\
+									\
 	clear_thread_flag(TIF_32BIT_REGS);				\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
@@ -304,7 +307,8 @@ do {									\
 	else								\
 		current->thread.abi = &mips_abi;			\
 									\
-	if (current->personality != PER_LINUX32)			\
+	p = personality(current->personality);				\
+	if (p != PER_LINUX32 && p != PER_LINUX)				\
 		set_personality(PER_LINUX);				\
 } while (0)
 

arch/mips/include/asm/io.h

@@ -329,10 +329,14 @@ static inline void pfx##write##bwlq(type val,				\
 			"dsrl32	%L0, %L0, 0"			"\n\t"	\
 			"dsll32	%M0, %M0, 0"			"\n\t"	\
 			"or	%L0, %L0, %M0"			"\n\t"	\
+			".set	push"				"\n\t"	\
+			".set	noreorder"			"\n\t"	\
+			".set	nomacro"			"\n\t"	\
 			"sd	%L0, %2"			"\n\t"	\
+			".set	pop"				"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__tmp)					\
-			: "0" (__val), "m" (*__mem));			\
+			: "0" (__val), "R" (*__mem));			\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else								\
@@ -355,12 +359,16 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
 			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			".set	push"				"\n\t"	\
+			".set	noreorder"			"\n\t"	\
+			".set	nomacro"			"\n\t"	\
 			"ld	%L0, %1"			"\n\t"	\
+			".set	pop"				"\n\t"	\
 			"dsra32	%M0, %L0, 0"			"\n\t"	\
 			"sll	%L0, %L0, 0"			"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__val)					\
-			: "m" (*__mem));				\
+			: "R" (*__mem));				\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else {							\

arch/mips/include/asm/mach-ar7/ar7.h

@@ -201,7 +201,6 @@ static inline void ar7_device_off(u32 bit)
 }
 
 int __init ar7_gpio_init(void);
-
-int __init ar7_gpio_init(void);
+void __init ar7_init_clocks(void);
 
 #endif /* __AR7_H__ */

arch/mips/include/asm/mach-bcm47xx/nvram.h

@@ -12,6 +12,7 @@
 #define __NVRAM_H
 
 #include <linux/types.h>
+#include <linux/kernel.h>
 
 struct nvram_header {
 	u32 magic;
@@ -36,4 +37,10 @@ struct nvram_header {
 
 extern int nvram_getenv(char *name, char *val, size_t val_len);
 
+static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+{
+	sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+	       &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+}
+
 #endif

arch/mips/jz4740/board-qi_lb60.c

@@ -5,7 +5,7 @@
  *
  * Copyright (c) 2009 Qi Hardware inc.,
  * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
+ * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 or later
@@ -235,7 +235,7 @@ static const unsigned int qi_lb60_keypad_rows[] = {
 	QI_LB60_GPIO_KEYIN(3),
 	QI_LB60_GPIO_KEYIN(4),
 	QI_LB60_GPIO_KEYIN(5),
-	QI_LB60_GPIO_KEYIN(7),
+	QI_LB60_GPIO_KEYIN(6),
 	QI_LB60_GPIO_KEYIN8,
 };
 

arch/mips/jz4740/platform.c

@@ -208,7 +208,7 @@ struct platform_device jz4740_i2s_device = {
 
 /* PCM */
 struct platform_device jz4740_pcm_device = {
-	.name		= "jz4740-pcm",
+	.name		= "jz4740-pcm-audio",
 	.id		= -1,
 };
 

arch/mips/jz4740/prom.c

@@ -23,7 +23,7 @@
 #include <asm/bootinfo.h>
 #include <asm/mach-jz4740/base.h>
 
-void jz4740_init_cmdline(int argc, char *argv[])
+static __init void jz4740_init_cmdline(int argc, char *argv[])
 {
 	unsigned int count = COMMAND_LINE_SIZE - 1;
 	int i;

arch/mips/kernel/cevt-r4k.c

@@ -32,7 +32,7 @@ static int mips_next_event(unsigned long delta,
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
-	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+	res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
 	return res;
 }
 

arch/mips/kernel/cpu-probe.c

@@ -905,7 +905,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
-	case PRID_IMP_BMIPS32:
+	case PRID_IMP_BMIPS32_REV4:
+	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
 		__cpu_name[cpu] = "Broadcom BMIPS32";
 		break;
@@ -933,10 +934,6 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "Broadcom BMIPS5000";
 		c->options |= MIPS_CPU_ULRI;
 		break;
-	case PRID_IMP_BMIPS4KC:
-		c->cputype = CPU_4KC;
-		__cpu_name[cpu] = "MIPS 4Kc";
-		break;
 	}
 }
 

arch/mips/kernel/linux32.c

@@ -251,14 +251,15 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
 
 SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
+	unsigned int p = personality & 0xffffffff;
 	int ret;
-	personality &= 0xffffffff;
+
 	if (personality(current->personality) == PER_LINUX32 &&
-	    personality == PER_LINUX)
-		personality = PER_LINUX32;
-	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
+	    personality(p) == PER_LINUX)
+		p = (p & ~PER_MASK) | PER_LINUX32;
+	ret = sys_personality(p);
+	if (ret != -1 && personality(ret) == PER_LINUX32)
+		ret = (ret & ~PER_MASK) | PER_LINUX;
 	return ret;
 }
 

arch/mips/kernel/process.c

@@ -142,7 +142,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	childregs->regs[7] = 0;	/* Clear error flag */
 
 	childregs->regs[2] = 0;	/* Child gets zero as return value */
-	regs->regs[2] = p->pid;
 
 	if (childregs->cp0_status & ST0_CU0) {
 		childregs->regs[28] = (unsigned long) ti;

arch/mips/kernel/prom.c

@@ -100,7 +100,7 @@ void __init device_tree_init(void)
 		return;
 
 	base = virt_to_phys((void *)initial_boot_params);
-	size = initial_boot_params->totalsize;
+	size = be32_to_cpu(initial_boot_params->totalsize);
 
 	/* Before we do anything, lets reserve the dt blob */
 	reserve_mem_mach(base, size);

arch/mips/kernel/smp-mt.c

@@ -153,7 +153,7 @@ static void __cpuinit vsmp_init_secondary(void)
 {
 	extern int gic_present;
 
-	/* This is Malta specific: IPI,performance and timer inetrrupts */
+	/* This is Malta specific: IPI,performance and timer interrupts */
 	if (gic_present)
 		change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
 					 STATUSF_IP6 | STATUSF_IP7);

arch/mips/kernel/traps.c

@@ -83,7 +83,8 @@ extern asmlinkage void handle_mcheck(void);
 extern asmlinkage void handle_reserved(void);
 
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
-	struct mips_fpu_struct *ctx, int has_fpu);
+				    struct mips_fpu_struct *ctx, int has_fpu,
+				    void *__user *fault_addr);
 
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
@@ -661,12 +662,36 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	force_sig_info(SIGFPE, &info, current);
 }
 
+static int process_fpemu_return(int sig, void __user *fault_addr)
+{
+	if (sig == SIGSEGV || sig == SIGBUS) {
+		struct siginfo si = {0};
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		if (sig == SIGSEGV) {
+			if (find_vma(current->mm, (unsigned long)fault_addr))
+				si.si_code = SEGV_ACCERR;
+			else
+				si.si_code = SEGV_MAPERR;
+		} else {
+			si.si_code = BUS_ADRERR;
+		}
+		force_sig_info(sig, &si, current);
+		return 1;
+	} else if (sig) {
+		force_sig(sig, current);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
 /*
  * XXX Delayed fp exceptions when doing a lazy ctx switch XXX
  */
 asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
-	siginfo_t info;
+	siginfo_t info = {0};
 
 	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
 	    == NOTIFY_STOP)
@@ -675,6 +700,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 
 	if (fcr31 & FPU_CSR_UNI_X) {
 		int sig;
+		void __user *fault_addr = NULL;
 
 		/*
 		 * Unimplemented operation exception.  If we've got the full
@@ -690,7 +716,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		lose_fpu(1);
 
 		/* Run the emulator */
-		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1);
+		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+					       &fault_addr);
 
 		/*
 		 * We can't allow the emulated instruction to leave any of
@@ -702,8 +729,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		own_fpu(1);	/* Using the FPU again.  */
 
 		/* If something went wrong, signal */
-		if (sig)
-			force_sig(sig, current);
+		process_fpemu_return(sig, fault_addr);
 
 		return;
 	} else if (fcr31 & FPU_CSR_INV_X)
@@ -996,11 +1022,11 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 		if (!raw_cpu_has_fpu) {
 			int sig;
+			void __user *fault_addr = NULL;
 			sig = fpu_emulator_cop1Handler(regs,
-						&current->thread.fpu, 0);
-			if (sig)
-				force_sig(sig, current);
-			else
+						       &current->thread.fpu,
+						       0, &fault_addr);
+			if (!process_fpemu_return(sig, fault_addr))
 				mt_ase_fp_affinity();
 		}
 

arch/mips/kernel/vpe.c

@@ -1092,6 +1092,10 @@ static int vpe_open(struct inode *inode, struct file *filp)
 
 	/* this of-course trashes what was there before... */
 	v->pbuffer = vmalloc(P_SIZE);
+	if (!v->pbuffer) {
+		pr_warning("VPE loader: unable to allocate memory\n");
+		return -ENOMEM;
+	}
 	v->plen = P_SIZE;
 	v->load_addr = NULL;
 	v->len = 0;
@@ -1149,10 +1153,9 @@ static int vpe_release(struct inode *inode, struct file *filp)
 	if (ret < 0)
 		v->shared_ptr = NULL;
 
-	// cleanup any temp buffers
-	if (v->pbuffer)
-		vfree(v->pbuffer);
+	vfree(v->pbuffer);
 	v->plen = 0;
+
 	return ret;
 }
 
@@ -1169,11 +1172,6 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer,
 	if (v == NULL)
 		return -ENODEV;
 
-	if (v->pbuffer == NULL) {
-		printk(KERN_ERR "VPE loader: no buffer for program\n");
-		return -ENOMEM;
-	}
-
 	if ((count + v->len) > v->plen) {
 		printk(KERN_WARNING
 		       "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");

arch/mips/lib/memset.S

@@ -161,16 +161,16 @@ FEXPORT(__bzero)
 
 .Lfwd_fixup:
 	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, 0x3f
+	LONG_L		t0, THREAD_BUADDR(t0)
 	LONG_ADDU	a2, t1
 	jr		ra
 	 LONG_SUBU	a2, t0
 
 .Lpartial_fixup:
 	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, LONGMASK
+	LONG_L		t0, THREAD_BUADDR(t0)
 	LONG_ADDU	a2, t1
 	jr		ra
 	 LONG_SUBU	a2, t0

arch/mips/loongson/common/env.c

@@ -29,9 +29,9 @@ unsigned long memsize, highmemsize;
 
 #define parse_even_earlier(res, option, p)				\
 do {									\
+	int ret;							\
 	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-			strict_strtol((char *)p + strlen(option"="),	\
-					10, &res);			\
+		ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
 } while (0)
 
 void __init prom_init_env(void)

arch/mips/math-emu/cp1emu.c

@@ -64,7 +64,7 @@ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
 
 #if __mips >= 4 && __mips != 32
 static int fpux_emu(struct pt_regs *,
-	struct mips_fpu_struct *, mips_instruction);
+	struct mips_fpu_struct *, mips_instruction, void *__user *);
 #endif
 
 /* Further private data for which no space exists in mips_fpu_struct */
@@ -208,16 +208,23 @@ static inline int cop1_64bit(struct pt_regs *xcp)
  * Two instructions if the instruction is in a branch delay slot.
  */
 
-static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
+static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+		       void *__user *fault_addr)
 {
 	mips_instruction ir;
 	unsigned long emulpc, contpc;
 	unsigned int cond;
 
-	if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+	if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
 		MIPS_FPU_EMU_INC_STATS(errors);
+		*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 		return SIGBUS;
 	}
+	if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+		MIPS_FPU_EMU_INC_STATS(errors);
+		*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+		return SIGSEGV;
+	}
 
 	/* XXX NEC Vr54xx bug workaround */
 	if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir))
@@ -245,10 +252,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 #endif
 			return SIGILL;
 		}
-		if (get_user(ir, (mips_instruction __user *) emulpc)) {
+		if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)emulpc;
 			return SIGBUS;
 		}
+		if (__get_user(ir, (mips_instruction __user *) emulpc)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)emulpc;
+			return SIGSEGV;
+		}
 		/* __compute_return_epc() will have updated cp0_epc */
 		contpc = xcp->cp0_epc;
 		/* In order not to confuse ptrace() et al, tweak context */
@@ -269,10 +282,17 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 		u64 val;
 
 		MIPS_FPU_EMU_INC_STATS(loads);
-		if (get_user(val, va)) {
+
+		if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__get_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		DITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
@@ -284,10 +304,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 		MIPS_FPU_EMU_INC_STATS(stores);
 		DIFROMREG(val, MIPSInst_RT(ir));
-		if (put_user(val, va)) {
+		if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__put_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		break;
 	}
 
@@ -297,10 +323,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 		u32 val;
 
 		MIPS_FPU_EMU_INC_STATS(loads);
-		if (get_user(val, va)) {
+		if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__get_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		SITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
@@ -312,10 +344,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 		MIPS_FPU_EMU_INC_STATS(stores);
 		SIFROMREG(val, MIPSInst_RT(ir));
-		if (put_user(val, va)) {
+		if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__put_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		break;
 	}
 
@@ -440,11 +478,18 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 				contpc = (xcp->cp0_epc +
 					(MIPSInst_SIMM(ir) << 2));
 
-				if (get_user(ir,
-				    (mips_instruction __user *) xcp->cp0_epc)) {
+				if (!access_ok(VERIFY_READ, xcp->cp0_epc,
+					       sizeof(mips_instruction))) {
 					MIPS_FPU_EMU_INC_STATS(errors);
+					*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 					return SIGBUS;
 				}
+				if (__get_user(ir,
+				    (mips_instruction __user *) xcp->cp0_epc)) {
+					MIPS_FPU_EMU_INC_STATS(errors);
+					*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+					return SIGSEGV;
+				}
 
 				switch (MIPSInst_OPCODE(ir)) {
 				case lwc1_op:
@@ -506,9 +551,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 #if __mips >= 4 && __mips != 32
 	case cop1x_op:{
-		int sig;
-
-		if ((sig = fpux_emu(xcp, ctx, ir)))
+		int sig = fpux_emu(xcp, ctx, ir, fault_addr);
+		if (sig)
 			return sig;
 		break;
 	}
@@ -604,7 +648,7 @@ DEF3OP(nmadd, dp, ieee754dp_mul, ieee754dp_add, ieee754dp_neg);
 DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);
 
 static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
-	mips_instruction ir)
+	mips_instruction ir, void *__user *fault_addr)
 {
 	unsigned rcsr = 0;	/* resulting csr */
 
@@ -624,10 +668,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 				xcp->regs[MIPSInst_FT(ir)]);
 
 			MIPS_FPU_EMU_INC_STATS(loads);
-			if (get_user(val, va)) {
+			if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__get_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			SITOREG(val, MIPSInst_FD(ir));
 			break;
 
@@ -638,10 +688,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			MIPS_FPU_EMU_INC_STATS(stores);
 
 			SIFROMREG(val, MIPSInst_FS(ir));
-			if (put_user(val, va)) {
+			if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (put_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			break;
 
 		case madd_s_op:
@@ -701,10 +757,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 				xcp->regs[MIPSInst_FT(ir)]);
 
 			MIPS_FPU_EMU_INC_STATS(loads);
-			if (get_user(val, va)) {
+			if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__get_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			DITOREG(val, MIPSInst_FD(ir));
 			break;
 
@@ -714,10 +776,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 
 			MIPS_FPU_EMU_INC_STATS(stores);
 			DIFROMREG(val, MIPSInst_FS(ir));
-			if (put_user(val, va)) {
+			if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__put_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			break;
 
 		case madd_d_op:
@@ -1242,7 +1310,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 }
 
 int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
-	int has_fpu)
+	int has_fpu, void *__user *fault_addr)
 {
 	unsigned long oldepc, prevepc;
 	mips_instruction insn;
@@ -1252,10 +1320,16 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 	do {
 		prevepc = xcp->cp0_epc;
 
-		if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+		if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 			return SIGBUS;
 		}
+		if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+			return SIGSEGV;
+		}
 		if (insn == 0)
 			xcp->cp0_epc += 4;	/* skip nops */
 		else {
@@ -1267,7 +1341,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			 */
 			/* convert to ieee library modes */
 			ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
-			sig = cop1Emulate(xcp, ctx);
+			sig = cop1Emulate(xcp, ctx, fault_addr);
 			/* revert to mips rounding mode */
 			ieee754_csr.rm = mips_rm[ieee754_csr.rm];
 		}

arch/mips/mm/dma-default.c

@@ -288,7 +288,7 @@ int mips_dma_supported(struct device *dev, u64 mask)
 	return plat_dma_supported(dev, mask);
 }
 
-void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 			 enum dma_data_direction direction)
 {
 	BUG_ON(direction == DMA_NONE);
@@ -298,6 +298,8 @@ void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		__dma_sync((unsigned long)vaddr, size, direction);
 }
 
+EXPORT_SYMBOL(dma_cache_sync);
+
 static struct dma_map_ops mips_default_dma_map_ops = {
 	.alloc_coherent = mips_dma_alloc_coherent,
 	.free_coherent = mips_dma_free_coherent,

arch/mips/mm/sc-mips.c

@@ -68,6 +68,9 @@ static struct bcache_ops mips_sc_ops = {
  */
 static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 {
+	unsigned int config2 = read_c0_config2();
+	unsigned int tmp;
+
 	/* Check the bypass bit (L2B) */
 	switch (c->cputype) {
 	case CPU_34K:
@@ -83,6 +86,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 		c->scache.linesz = 2 << tmp;
 	else
 		return 0;
+	return 1;
 }
 
 static inline int __init mips_sc_probe(void)

arch/mips/pmc-sierra/yosemite/py-console.c

@@ -65,11 +65,15 @@ static unsigned char readb_outer_space(unsigned long long phys)
 
 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
+	"	.set	push		\n"
+	"	.set	noreorder	\n"
+	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
+	"	.set	pop		\n"
 	"	lbu	%0, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=r" (res)
-	: "m" (vaddr));
+	: "R" (vaddr));
 
 	write_c0_status(sr);
 	ssnop_4();
@@ -89,11 +93,15 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c)
 
 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
+	"	.set	push		\n"
+	"	.set	noreorder	\n"
+	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
+	"	.set	pop		\n"
 	"	sb	%2, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=&r" (tmp)
-	: "m" (vaddr), "r" (c));
+	: "R" (vaddr), "r" (c));
 
 	write_c0_status(sr);
 	ssnop_4();

arch/mips/sibyte/swarm/setup.c

@@ -82,7 +82,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 enum swarm_rtc_type {
 	RTC_NONE,
 	RTC_XICOR,
-	RTC_M4LT81
+	RTC_M41T81,
 };
 
 enum swarm_rtc_type swarm_rtc_type;
@@ -96,7 +96,7 @@ void read_persistent_clock(struct timespec *ts)
 		sec = xicor_get_time();
 		break;
 
-	case RTC_M4LT81:
+	case RTC_M41T81:
 		sec = m41t81_get_time();
 		break;
 
@@ -115,7 +115,7 @@ int rtc_mips_set_time(unsigned long sec)
 	case RTC_XICOR:
 		return xicor_set_time(sec);
 
-	case RTC_M4LT81:
+	case RTC_M41T81:
 		return m41t81_set_time(sec);
 
 	case RTC_NONE:
@@ -141,7 +141,7 @@ void __init plat_mem_setup(void)
 	if (xicor_probe())
 		swarm_rtc_type = RTC_XICOR;
 	if (m41t81_probe())
-		swarm_rtc_type = RTC_M4LT81;
+		swarm_rtc_type = RTC_M41T81;
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {

arch/mn10300/kernel/time.c

@@ -40,21 +40,17 @@ unsigned long long sched_clock(void)
 		unsigned long long ll;
 		unsigned l[2];
 	} tsc64, result;
-	unsigned long tsc, tmp;
+	unsigned long tmp;
 	unsigned product[3]; /* 96-bit intermediate value */
 
 	/* cnt32_to_63() is not safe with preemption */
 	preempt_disable();
 
-	/* read the TSC value
-	 */
-	tsc = get_cycles();
-
-	/* expand to 64-bits.
+	/* expand the tsc to 64-bits.
 	 * - sched_clock() must be called once a minute or better or the
 	 *   following will go horribly wrong - see cnt32_to_63()
 	 */
-	tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
+	tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL;
 
 	preempt_enable();
 

arch/tile/include/asm/signal.h

@@ -25,7 +25,7 @@
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 struct pt_regs;
-int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
 int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
 void do_signal(struct pt_regs *regs);
 #endif

arch/tile/kernel/compat_signal.c

@@ -290,12 +290,12 @@ long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
 	return ret;
 }
 
+/* The assembly shim for this function arranges to ignore the return value. */
 long compat_sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct compat_rt_sigframe __user *frame =
 		(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
 	sigset_t set;
-	long r0;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
@@ -308,13 +308,13 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
 	if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
 		goto badframe;
 
-	return r0;
+	return 0;
 
 badframe:
 	force_sig(SIGSEGV, current);

arch/tile/kernel/intvec_32.S

@@ -1342,8 +1342,8 @@ handle_syscall:
 	lw      r20, r20
 
 	/* Jump to syscall handler. */
-	jalr    r20; .Lhandle_syscall_link:
-	FEEDBACK_REENTER(handle_syscall)
+	jalr    r20
+.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */
 
 	/*
 	 * Write our r0 onto the stack so it gets restored instead
@@ -1352,6 +1352,9 @@ handle_syscall:
 	PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
 	sw      r29, r0
 
+.Lsyscall_sigreturn_skip:
+	FEEDBACK_REENTER(handle_syscall)
+
 	/* Do syscall trace again, if requested. */
 	lw	r30, r31
 	andi    r30, r30, _TIF_SYSCALL_TRACE
@@ -1536,9 +1539,24 @@ STD_ENTRY_LOCAL(bad_intr)
 	};                                              \
 	STD_ENDPROC(_##x)
 
+/*
+ * Special-case sigreturn to not write r0 to the stack on return.
+ * This is technically more efficient, but it also avoids difficulties
+ * in the 64-bit OS when handling 32-bit compat code, since we must not
+ * sign-extend r0 for the sigreturn return-value case.
+ */
+#define PTREGS_SYSCALL_SIGRETURN(x, reg)                \
+	STD_ENTRY(_##x);                                \
+	addli   lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
+	{                                               \
+	 PTREGS_PTR(reg, PTREGS_OFFSET_BASE);           \
+	 j      x                                       \
+	};                                              \
+	STD_ENDPROC(_##x)
+
 PTREGS_SYSCALL(sys_execve, r3)
 PTREGS_SYSCALL(sys_sigaltstack, r2)
-PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
 PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
 
 /* Save additional callee-saves to pt_regs, put address in r4 and jump. */

arch/tile/kernel/process.c

@@ -211,6 +211,13 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	childregs->regs[0] = 0;         /* return value is zero */
 	childregs->sp = sp;  /* override with new user stack pointer */
 
+	/*
+	 * If CLONE_SETTLS is set, set "tp" in the new task to "r4",
+	 * which is passed in as arg #5 to sys_clone().
+	 */
+	if (clone_flags & CLONE_SETTLS)
+		childregs->tp = regs->regs[4];
+
 	/*
 	 * Copy the callee-saved registers from the passed pt_regs struct
 	 * into the context-switch callee-saved registers area.
@@ -539,6 +546,7 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
 	return __switch_to(prev, next, next_current_ksp0(next));
 }
 
+/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */
 SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
 		void __user *, parent_tidptr, void __user *, child_tidptr,
 		struct pt_regs *, regs)

arch/tile/kernel/signal.c

@@ -52,7 +52,7 @@ SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss,
  */
 
 int restore_sigcontext(struct pt_regs *regs,
-		       struct sigcontext __user *sc, long *pr0)
+		       struct sigcontext __user *sc)
 {
 	int err = 0;
 	int i;
@@ -75,17 +75,15 @@ int restore_sigcontext(struct pt_regs *regs,
 
 	regs->faultnum = INT_SWINT_1_SIGRETURN;
 
-	err |= __get_user(*pr0, &sc->gregs[0]);
 	return err;
 }
 
-/* sigreturn() returns long since it restores r0 in the interrupted code. */
+/* The assembly shim for this function arranges to ignore the return value. */
 SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
 {
 	struct rt_sigframe __user *frame =
 		(struct rt_sigframe __user *)(regs->sp);
 	sigset_t set;
-	long r0;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
@@ -98,13 +96,13 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
 	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
 		goto badframe;
 
-	return r0;
+	return 0;
 
 badframe:
 	force_sig(SIGSEGV, current);

arch/x86/boot/compressed/misc.c

@@ -355,7 +355,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	if (heap > 0x3fffffffffffUL)
 		error("Destination address too large");
 #else
-	if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
+	if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
 		error("Destination address too large");
 #endif
 #ifndef CONFIG_RELOCATABLE

arch/x86/include/asm/e820.h

@@ -72,6 +72,9 @@ struct e820map {
 #define BIOS_BEGIN		0x000a0000
 #define BIOS_END		0x00100000
 
+#define BIOS_ROM_BASE		0xffe00000
+#define BIOS_ROM_END		0xffffffff
+
 #ifdef __KERNEL__
 /* see comment in arch/x86/kernel/e820.c */
 extern struct e820map e820;

arch/x86/include/asm/kvm_host.h

@@ -79,7 +79,7 @@
 #define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
 #define KVM_MIN_FREE_MMU_PAGES 5
 #define KVM_REFILL_PAGES 25
-#define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_MAX_CPUID_ENTRIES 80
 #define KVM_NR_FIXED_MTRR_REGION 88
 #define KVM_NR_VAR_MTRR 8
 

arch/x86/kernel/Makefile

@@ -45,6 +45,7 @@ obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
 obj-y			+= alternative.o i8253.o pci-nommu.o hw_breakpoint.o
 obj-y			+= tsc.o io_delay.o rtc.o
 obj-y			+= pci-iommu_table.o
+obj-y			+= resource.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o

arch/x86/kernel/apic/apic.c

@@ -1389,6 +1389,14 @@ void __cpuinit end_local_APIC_setup(void)
 
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
+
+	/*
+	 * Now that local APIC setup is completed for BP, configure the fault
+	 * handling for interrupt remapping.
+	 */
+	if (!smp_processor_id() && intr_remapping_enabled)
+		enable_drhd_fault_handling();
+
 }
 
 #ifdef CONFIG_X86_X2APIC

arch/x86/kernel/apic/io_apic.c

@@ -2430,13 +2430,12 @@ static void ack_apic_level(struct irq_data *data)
 {
 	struct irq_cfg *cfg = data->chip_data;
 	int i, do_unmask_irq = 0, irq = data->irq;
-	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long v;
 
 	irq_complete_move(cfg);
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	/* If we are moving the irq we need to mask it */
-	if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+	if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
 		do_unmask_irq = 1;
 		mask_ioapic(cfg);
 	}
@@ -3413,6 +3412,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	msg.data |= MSI_DATA_VECTOR(cfg->vector);
 	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+	msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
 
 	dmar_msi_write(irq, &msg);
 

arch/x86/kernel/apic/probe_64.c

@@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void)
 		/* need to update phys_pkg_id */
 		apic->phys_pkg_id = apicid_phys_pkg_id;
 	}
-
-	/*
-	 * Now that apic routing model is selected, configure the
-	 * fault handling for intr remapping.
-	 */
-	if (intr_remapping_enabled)
-		enable_drhd_fault_handling();
 }
 
 /* Same for both flat and physical. */

arch/x86/kernel/head_32.S

@@ -60,16 +60,18 @@
 #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
 #endif
 
+/* Number of possible pages in the lowmem region */
+LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
+	
 /* Enough space to fit pagetables for the low memory linear map */
-MAPPING_BEYOND_END = \
-	PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
 
 /*
  * Worst-case size of the kernel mapping we need to make:
- * the worst-case size of the kernel itself, plus the extra we need
- * to map for the linear map.
+ * a relocatable kernel can live anywhere in lowmem, so we need to be able
+ * to map all of lowmem.
  */
-KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
+KERNEL_PAGES = LOWMEM_PAGES
 
 INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
 RESERVE_BRK(pagetables, INIT_MAP_SIZE)
@@ -620,13 +622,13 @@ ENTRY(initial_code)
 __PAGE_ALIGNED_BSS
 	.align PAGE_SIZE_asm
 #ifdef CONFIG_X86_PAE
-initial_pg_pmd:
+ENTRY(initial_pg_pmd)
 	.fill 1024*KPMDS,4,0
 #else
 ENTRY(initial_page_table)
 	.fill 1024,4,0
 #endif
-initial_pg_fixmap:
+ENTRY(initial_pg_fixmap)
 	.fill 1024,4,0
 ENTRY(empty_zero_page)
 	.fill 4096,1,0

arch/x86/kernel/hpet.c

@@ -27,6 +27,9 @@
 #define HPET_DEV_FSB_CAP		0x1000
 #define HPET_DEV_PERI_CAP		0x2000
 
+#define HPET_MIN_CYCLES			128
+#define HPET_MIN_PROG_DELTA		(HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
 #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
 
 /*
@@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void)
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	/* 5 usec minimum reprogramming delta. */
-	hpet_clockevent.min_delta_ns = 5000;
+	/* Setup minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+							   &hpet_clockevent);
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
@@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta,
 	 * the wraparound into account) nor a simple count down event
 	 * mode. Further the write to the comparator register is
 	 * delayed internally up to two HPET clock cycles in certain
-	 * chipsets (ATI, ICH9,10). We worked around that by reading
-	 * back the compare register, but that required another
-	 * workaround for ICH9,10 chips where the first readout after
-	 * write can return the old stale value. We already have a
-	 * minimum delta of 5us enforced, but a NMI or SMI hitting
+	 * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+	 * longer delays. We worked around that by reading back the
+	 * compare register, but that required another workaround for
+	 * ICH9,10 chips where the first readout after write can
+	 * return the old stale value. We already had a minimum
+	 * programming delta of 5us enforced, but a NMI or SMI hitting
 	 * between the counter readout and the comparator write can
 	 * move us behind that point easily. Now instead of reading
 	 * the compare register back several times, we make the ETIME
 	 * decision based on the following: Return ETIME if the
-	 * counter value after the write is less than 8 HPET cycles
+	 * counter value after the write is less than HPET_MIN_CYCLES
 	 * away from the event or if the counter is already ahead of
-	 * the event.
+	 * the event. The minimum programming delta for the generic
+	 * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
 	 */
 	res = (s32)(cnt - hpet_readl(HPET_COUNTER));
 
-	return res < 8 ? -ETIME : 0;
+	return res < HPET_MIN_CYCLES ? -ETIME : 0;
 }
 
 static void hpet_legacy_set_mode(enum clock_event_mode mode,

arch/x86/kernel/resource.c

@@ -0,0 +1,48 @@
+#include <linux/ioport.h>
+#include <asm/e820.h>
+
+static void resource_clip(struct resource *res, resource_size_t start,
+			  resource_size_t end)
+{
+	resource_size_t low = 0, high = 0;
+
+	if (res->end < start || res->start > end)
+		return;		/* no conflict */
+
+	if (res->start < start)
+		low = start - res->start;
+
+	if (res->end > end)
+		high = res->end - end;
+
+	/* Keep the area above or below the conflict, whichever is larger */
+	if (low > high)
+		res->end = start - 1;
+	else
+		res->start = end + 1;
+}
+
+static void remove_e820_regions(struct resource *avail)
+{
+	int i;
+	struct e820entry *entry;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		entry = &e820.map[i];
+
+		resource_clip(avail, entry->addr,
+			      entry->addr + entry->size - 1);
+	}
+}
+
+void arch_remove_reservations(struct resource *avail)
+{
+	/* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
+	if (avail->flags & IORESOURCE_MEM) {
+		if (avail->start < BIOS_END)
+			avail->start = BIOS_END;
+		resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+		remove_e820_regions(avail);
+	}
+}

arch/x86/kernel/setup.c

@@ -769,7 +769,6 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_init.oem.arch_setup();
 
-	resource_alloc_from_bottom = 0;
 	iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
 	setup_memory_map();
 	parse_setup_data();

arch/x86/kernel/xsave.c

@@ -394,7 +394,8 @@ static void __init setup_xstate_init(void)
 	 * Setup init_xstate_buf to represent the init state of
 	 * all the features managed by the xsave
 	 */
-	init_xstate_buf = alloc_bootmem(xstate_size);
+	init_xstate_buf = alloc_bootmem_align(xstate_size,
+					      __alignof__(struct xsave_struct));
 	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
 
 	clts();

arch/x86/kvm/svm.c

@@ -3494,6 +3494,10 @@ static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
 {
 	switch (func) {
+	case 0x00000001:
+		/* Mask out xsave bit as long as it is not supported by SVM */
+		entry->ecx &= ~(bit(X86_FEATURE_XSAVE));
+		break;
 	case 0x80000001:
 		if (nested)
 			entry->ecx |= (1 << 2); /* Set SVM bit */

arch/x86/kvm/vmx.c

@@ -4227,11 +4227,6 @@ static int vmx_get_lpage_level(void)
 		return PT_PDPE_LEVEL;
 }
 
-static inline u32 bit(int bitno)
-{
-	return 1 << (bitno & 31);
-}
-
 static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;

arch/x86/kvm/x86.c

@@ -155,11 +155,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 
 u64 __read_mostly host_xcr0;
 
-static inline u32 bit(int bitno)
-{
-	return 1 << (bitno & 31);
-}
-
 static void kvm_on_user_return(struct user_return_notifier *urn)
 {
 	unsigned slot;
@@ -4569,9 +4564,11 @@ static void kvm_timer_init(void)
 #ifdef CONFIG_CPU_FREQ
 		struct cpufreq_policy policy;
 		memset(&policy, 0, sizeof(policy));
-		cpufreq_get_policy(&policy, get_cpu());
+		cpu = get_cpu();
+		cpufreq_get_policy(&policy, cpu);
 		if (policy.cpuinfo.max_freq)
 			max_tsc_khz = policy.cpuinfo.max_freq;
+		put_cpu();
 #endif
 		cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
 					  CPUFREQ_TRANSITION_NOTIFIER);
@@ -5522,6 +5519,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
 	kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
+	if (sregs->cr4 & X86_CR4_OSXSAVE)
+		update_cpuid(vcpu);
 	if (!is_long_mode(vcpu) && is_pae(vcpu)) {
 		load_pdptrs(vcpu, vcpu->arch.walk_mmu, vcpu->arch.cr3);
 		mmu_reset_needed = 1;

arch/x86/kvm/x86.h

@@ -70,6 +70,11 @@ static inline int is_paging(struct kvm_vcpu *vcpu)
 	return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
 }
 
+static inline u32 bit(int bitno)
+{
+	return 1 << (bitno & 31);
+}
+
 void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
 void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
 int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq);

arch/x86/lguest/boot.c

@@ -531,7 +531,10 @@ static void lguest_write_cr3(unsigned long cr3)
 {
 	lguest_data.pgdir = cr3;
 	lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
-	cr3_changed = true;
+
+	/* These two page tables are simple, linear, and used during boot */
+	if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table))
+		cr3_changed = true;
 }
 
 static unsigned long lguest_read_cr3(void)
@@ -703,9 +706,9 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * to forget all of them.  Fortunately, this is very rare.
  *
  * ... except in early boot when the kernel sets up the initial pagetables,
- * which makes booting astonishingly slow: 1.83 seconds!  So we don't even tell
- * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds.
+ * which makes booting astonishingly slow: 48 seconds!  So we don't even tell
+ * the Host anything changed until we've done the first real page table switch,
+ * which brings boot back to 4.3 seconds.
  */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
@@ -1002,7 +1005,7 @@ static void lguest_time_init(void)
 	clockevents_register_device(&lguest_clockevent);
 
 	/* Finally, we unblock the timer interrupt. */
-	enable_lguest_irq(0);
+	clear_bit(0, lguest_data.blocked_interrupts);
 }
 
 /*
@@ -1349,9 +1352,6 @@ __init void lguest_init(void)
 	 */
 	switch_to_new_gdt(0);
 
-	/* We actually boot with all memory mapped, but let's say 128MB. */
-	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
-
 	/*
 	 * The Host<->Guest Switcher lives at the top of our address space, and
 	 * the Host told us how big it is when we made LGUEST_INIT hypercall:

arch/x86/lguest/i386_head.S

@@ -4,6 +4,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
+#include <asm/pgtable.h>
 
 /*G:020
  * Our story starts with the kernel booting into startup_32 in
@@ -37,9 +38,113 @@ ENTRY(lguest_entry)
 	/* Set up the initial stack so we can run C code. */
 	movl $(init_thread_union+THREAD_SIZE),%esp
 
+	call init_pagetables
+
 	/* Jumps are relative: we're running __PAGE_OFFSET too low. */
 	jmp lguest_init+__PAGE_OFFSET
 
+/*
+ * Initialize page tables.  This creates a PDE and a set of page
+ * tables, which are located immediately beyond __brk_base.  The variable
+ * _brk_end is set up to point to the first "safe" location.
+ * Mappings are created both at virtual address 0 (identity mapping)
+ * and PAGE_OFFSET for up to _end.
+ *
+ * FIXME: This code is taken verbatim from arch/x86/kernel/head_32.S: they
+ * don't have a stack at this point, so we can't just use call and ret.
+ */
+init_pagetables:
+#if PTRS_PER_PMD > 1
+#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD)
+#else
+#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
+#endif
+#define pa(X) ((X) - __PAGE_OFFSET)
+
+/* Enough space to fit pagetables for the low memory linear map */
+MAPPING_BEYOND_END = \
+	PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+#ifdef CONFIG_X86_PAE
+
+	/*
+	 * In PAE mode initial_page_table is statically defined to contain
+	 * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3
+	 * entries). The identity mapping is handled by pointing two PGD entries
+	 * to the first kernel PMD.
+	 *
+	 * Note the upper half of each PMD or PTE are always zero at this stage.
+	 */
+
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
+
+	xorl %ebx,%ebx				/* %ebx is kept at zero */
+
+	movl $pa(__brk_base), %edi
+	movl $pa(initial_pg_pmd), %edx
+	movl $PTE_IDENT_ATTR, %eax
+10:
+	leal PDE_IDENT_ATTR(%edi),%ecx		/* Create PMD entry */
+	movl %ecx,(%edx)			/* Store PMD entry */
+						/* Upper half already zero */
+	addl $8,%edx
+	movl $512,%ecx
+11:
+	stosl
+	xchgl %eax,%ebx
+	stosl
+	xchgl %eax,%ebx
+	addl $0x1000,%eax
+	loop 11b
+
+	/*
+	 * End condition: we must map up to the end + MAPPING_BEYOND_END.
+	 */
+	movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+	cmpl %ebp,%eax
+	jb 10b
+1:
+	addl $__PAGE_OFFSET, %edi
+	movl %edi, pa(_brk_end)
+	shrl $12, %eax
+	movl %eax, pa(max_pfn_mapped)
+
+	/* Do early initialization of the fixmap area */
+	movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+	movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
+#else	/* Not PAE */
+
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+	movl $pa(__brk_base), %edi
+	movl $pa(initial_page_table), %edx
+	movl $PTE_IDENT_ATTR, %eax
+10:
+	leal PDE_IDENT_ATTR(%edi),%ecx		/* Create PDE entry */
+	movl %ecx,(%edx)			/* Store identity PDE entry */
+	movl %ecx,page_pde_offset(%edx)		/* Store kernel PDE entry */
+	addl $4,%edx
+	movl $1024, %ecx
+11:
+	stosl
+	addl $0x1000,%eax
+	loop 11b
+	/*
+	 * End condition: we must map up to the end + MAPPING_BEYOND_END.
+	 */
+	movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+	cmpl %ebp,%eax
+	jb 10b
+	addl $__PAGE_OFFSET, %edi
+	movl %edi, pa(_brk_end)
+	shrl $12, %eax
+	movl %eax, pa(max_pfn_mapped)
+
+	/* Do early initialization of the fixmap area */
+	movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+	movl %eax,pa(initial_page_table+0xffc)
+#endif
+	ret
+
 /*G:055
  * We create a macro which puts the assembler code between lgstart_ and lgend_
  * markers.  These templates are put in the .text section: they can't be

arch/x86/pci/i386.c

@@ -65,21 +65,13 @@ pcibios_align_resource(void *data, const struct resource *res,
 			resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
-	resource_size_t start = round_down(res->end - size + 1, align);
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-
-		/*
-		 * If we're avoiding ISA aliases, the largest contiguous I/O
-		 * port space is 256 bytes.  Clearing bits 9 and 10 preserves
-		 * all 256-byte and smaller alignments, so the result will
-		 * still be correctly aligned.
-		 */
-		if (!skip_isa_ioresource_align(dev))
-			start &= ~0x300;
-	} else if (res->flags & IORESOURCE_MEM) {
-		if (start < BIOS_END)
-			start = res->end;	/* fail; no space */
+		if (skip_isa_ioresource_align(dev))
+			return start;
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
 	}
 	return start;
 }

arch/x86/vdso/Makefile

@@ -25,7 +25,7 @@ targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y)
 
 export CPPFLAGS_vdso.lds += -P -C
 
-VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \
+VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
 		      	-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
 
 $(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
@@ -69,7 +69,7 @@ vdso32.so-$(VDSO32-y)		+= sysenter
 vdso32-images			= $(vdso32.so-y:%=vdso32-%.so)
 
 CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds)
-VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1
+VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1
 
 # This makes sure the $(obj) subdirectory exists even though vdso32/
 # is not a kbuild sub-make subdirectory.

block/blk-map.c

@@ -201,12 +201,13 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 	for (i = 0; i < iov_count; i++) {
 		unsigned long uaddr = (unsigned long)iov[i].iov_base;
 
+		if (!iov[i].iov_len)
+			return -EINVAL;
+
 		if (uaddr & queue_dma_alignment(q)) {
 			unaligned = 1;
 			break;
 		}
-		if (!iov[i].iov_len)
-			return -EINVAL;
 	}
 
 	if (unaligned || (q->dma_pad_mask & len) || map_data)

block/blk-merge.c

@@ -21,7 +21,7 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
 		return 0;
 
 	fbio = bio;
-	cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+	cluster = blk_queue_cluster(q);
 	seg_size = 0;
 	nr_phys_segs = 0;
 	for_each_bio(bio) {
@@ -87,7 +87,7 @@ EXPORT_SYMBOL(blk_recount_segments);
 static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio,
 				   struct bio *nxt)
 {
-	if (!test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+	if (!blk_queue_cluster(q))
 		return 0;
 
 	if (bio->bi_seg_back_size + nxt->bi_seg_front_size >
@@ -123,7 +123,7 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq,
 	int nsegs, cluster;
 
 	nsegs = 0;
-	cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+	cluster = blk_queue_cluster(q);
 
 	/*
 	 * for each bio in rq

block/blk-settings.c

@@ -126,7 +126,7 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->alignment_offset = 0;
 	lim->io_opt = 0;
 	lim->misaligned = 0;
-	lim->no_cluster = 0;
+	lim->cluster = 1;
 }
 EXPORT_SYMBOL(blk_set_default_limits);
 
@@ -229,8 +229,8 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
 EXPORT_SYMBOL(blk_queue_bounce_limit);
 
 /**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q:  the request queue for the device
+ * blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request
+ * @limits: the queue limits
  * @max_hw_sectors:  max hardware sectors in the usual 512b unit
  *
  * Description:
@@ -244,7 +244,7 @@ EXPORT_SYMBOL(blk_queue_bounce_limit);
  *    per-device basis in /sys/block/<device>/queue/max_sectors_kb.
  *    The soft limit can not exceed max_hw_sectors.
  **/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors)
 {
 	if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
 		max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
@@ -252,9 +252,23 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_secto
 		       __func__, max_hw_sectors);
 	}
 
-	q->limits.max_hw_sectors = max_hw_sectors;
-	q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
-				      BLK_DEF_MAX_SECTORS);
+	limits->max_hw_sectors = max_hw_sectors;
+	limits->max_sectors = min_t(unsigned int, max_hw_sectors,
+				    BLK_DEF_MAX_SECTORS);
+}
+EXPORT_SYMBOL(blk_limits_max_hw_sectors);
+
+/**
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
+ * @q:  the request queue for the device
+ * @max_hw_sectors:  max hardware sectors in the usual 512b unit
+ *
+ * Description:
+ *    See description for blk_limits_max_hw_sectors().
+ **/
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+{
+	blk_limits_max_hw_sectors(&q->limits, max_hw_sectors);
 }
 EXPORT_SYMBOL(blk_queue_max_hw_sectors);
 
@@ -464,15 +478,6 @@ EXPORT_SYMBOL(blk_queue_io_opt);
 void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
 {
 	blk_stack_limits(&t->limits, &b->limits, 0);
-
-	if (!t->queue_lock)
-		WARN_ON_ONCE(1);
-	else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
-		unsigned long flags;
-		spin_lock_irqsave(t->queue_lock, flags);
-		queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
-		spin_unlock_irqrestore(t->queue_lock, flags);
-	}
 }
 EXPORT_SYMBOL(blk_queue_stack_limits);
 
@@ -545,7 +550,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->io_min = max(t->io_min, b->io_min);
 	t->io_opt = lcm(t->io_opt, b->io_opt);
 
-	t->no_cluster |= b->no_cluster;
+	t->cluster &= b->cluster;
 	t->discard_zeroes_data &= b->discard_zeroes_data;
 
 	/* Physical block size a multiple of the logical block size? */
@@ -641,7 +646,6 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		       sector_t offset)
 {
 	struct request_queue *t = disk->queue;
-	struct request_queue *b = bdev_get_queue(bdev);
 
 	if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
 		char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
@@ -652,17 +656,6 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
 		       top, bottom);
 	}
-
-	if (!t->queue_lock)
-		WARN_ON_ONCE(1);
-	else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(t->queue_lock, flags);
-		if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
-			queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
-		spin_unlock_irqrestore(t->queue_lock, flags);
-	}
 }
 EXPORT_SYMBOL(disk_stack_limits);
 

block/blk-sysfs.c

@@ -119,7 +119,7 @@ static ssize_t queue_max_integrity_segments_show(struct request_queue *q, char *
 
 static ssize_t queue_max_segment_size_show(struct request_queue *q, char *page)
 {
-	if (test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+	if (blk_queue_cluster(q))
 		return queue_var_show(queue_max_segment_size(q), (page));
 
 	return queue_var_show(PAGE_CACHE_SIZE, (page));

block/blk-throttle.c

@@ -355,6 +355,12 @@ throtl_start_new_slice(struct throtl_data *td, struct throtl_grp *tg, bool rw)
 			tg->slice_end[rw], jiffies);
 }
 
+static inline void throtl_set_slice_end(struct throtl_data *td,
+		struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
+{
+	tg->slice_end[rw] = roundup(jiffy_end, throtl_slice);
+}
+
 static inline void throtl_extend_slice(struct throtl_data *td,
 		struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
 {
@@ -391,6 +397,16 @@ throtl_trim_slice(struct throtl_data *td, struct throtl_grp *tg, bool rw)
 	if (throtl_slice_used(td, tg, rw))
 		return;
 
+	/*
+	 * A bio has been dispatched. Also adjust slice_end. It might happen
+	 * that initially cgroup limit was very low resulting in high
+	 * slice_end, but later limit was bumped up and bio was dispached
+	 * sooner, then we need to reduce slice_end. A high bogus slice_end
+	 * is bad because it does not allow new slice to start.
+	 */
+
+	throtl_set_slice_end(td, tg, rw, jiffies + throtl_slice);
+
 	time_elapsed = jiffies - tg->slice_start[rw];
 
 	nr_slices = time_elapsed / throtl_slice;
@@ -709,26 +725,21 @@ static void throtl_process_limit_change(struct throtl_data *td)
 	struct throtl_grp *tg;
 	struct hlist_node *pos, *n;
 
-	/*
-	 * Make sure atomic_inc() effects from
-	 * throtl_update_blkio_group_read_bps(), group of functions are
-	 * visible.
-	 * Is this required or smp_mb__after_atomic_inc() was suffcient
-	 * after the atomic_inc().
-	 */
-	smp_rmb();
 	if (!atomic_read(&td->limits_changed))
 		return;
 
 	throtl_log(td, "limit changed =%d", atomic_read(&td->limits_changed));
 
-	hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
-		/*
-		 * Do I need an smp_rmb() here to make sure tg->limits_changed
-		 * update is visible. I am relying on smp_rmb() at the
-		 * beginning of function and not putting a new one here.
-		 */
+	/*
+	 * Make sure updates from throtl_update_blkio_group_read_bps() group
+	 * of functions to tg->limits_changed are visible. We do not
+	 * want update td->limits_changed to be visible but update to
+	 * tg->limits_changed not being visible yet on this cpu. Hence
+	 * the read barrier.
+	 */
+	smp_rmb();
 
+	hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
 		if (throtl_tg_on_rr(tg) && tg->limits_changed) {
 			throtl_log_tg(td, tg, "limit change rbps=%llu wbps=%llu"
 				" riops=%u wiops=%u", tg->bps[READ],

drivers/block/cciss.c

@@ -2834,6 +2834,8 @@ static int cciss_revalidate(struct gendisk *disk)
 	InquiryData_struct *inq_buff = NULL;
 
 	for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
+		if (!h->drv[logvol])
+			continue;
 		if (memcmp(h->drv[logvol]->LunID, drv->LunID,
 			sizeof(drv->LunID)) == 0) {
 			FOUND = 1;

drivers/block/drbd/drbd_receiver.c

@@ -3627,17 +3627,19 @@ static void drbdd(struct drbd_conf *mdev)
 		}
 
 		shs = drbd_cmd_handler[cmd].pkt_size - sizeof(union p_header);
-		rv = drbd_recv(mdev, &header->h80.payload, shs);
-		if (unlikely(rv != shs)) {
-			dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
-			goto err_out;
-		}
-
 		if (packet_size - shs > 0 && !drbd_cmd_handler[cmd].expect_payload) {
 			dev_err(DEV, "No payload expected %s l:%d\n", cmdname(cmd), packet_size);
 			goto err_out;
 		}
 
+		if (shs) {
+			rv = drbd_recv(mdev, &header->h80.payload, shs);
+			if (unlikely(rv != shs)) {
+				dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
+				goto err_out;
+			}
+		}
+
 		rv = drbd_cmd_handler[cmd].function(mdev, cmd, packet_size - shs);
 
 		if (unlikely(!rv)) {

drivers/block/drbd/drbd_req.h

@@ -339,7 +339,8 @@ static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what)
 }
 
 /* completion of master bio is outside of spinlock.
- * If you need it irqsave, do it your self! */
+ * If you need it irqsave, do it your self!
+ * Which means: don't use from bio endio callback. */
 static inline int req_mod(struct drbd_request *req,
 		enum drbd_req_event what)
 {

drivers/block/drbd/drbd_worker.c

@@ -193,8 +193,10 @@ void drbd_endio_sec(struct bio *bio, int error)
  */
 void drbd_endio_pri(struct bio *bio, int error)
 {
+	unsigned long flags;
 	struct drbd_request *req = bio->bi_private;
 	struct drbd_conf *mdev = req->mdev;
+	struct bio_and_error m;
 	enum drbd_req_event what;
 	int uptodate = bio_flagged(bio, BIO_UPTODATE);
 
@@ -220,7 +222,13 @@ void drbd_endio_pri(struct bio *bio, int error)
 	bio_put(req->private_bio);
 	req->private_bio = ERR_PTR(error);
 
-	req_mod(req, what);
+	/* not req_mod(), we need irqsave here! */
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	__req_mod(req, what, &m);
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	if (m.bio)
+		complete_master_bio(mdev, &m);
 }
 
 int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)

drivers/clocksource/sh_cmt.c

@@ -283,16 +283,21 @@ static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p,
 	} while (delay);
 }
 
-static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+static void __sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
 {
-	unsigned long flags;
-
 	if (delta > p->max_match_value)
 		dev_warn(&p->pdev->dev, "delta out of range\n");
 
-	spin_lock_irqsave(&p->lock, flags);
 	p->next_match_value = delta;
 	sh_cmt_clock_event_program_verify(p, 0);
+}
+
+static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+	__sh_cmt_set_next(p, delta);
 	spin_unlock_irqrestore(&p->lock, flags);
 }
 
@@ -359,7 +364,7 @@ static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag)
 
 	/* setup timeout if no clockevent */
 	if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
-		sh_cmt_set_next(p, p->max_match_value);
+		__sh_cmt_set_next(p, p->max_match_value);
  out:
 	spin_unlock_irqrestore(&p->lock, flags);
 
@@ -381,7 +386,7 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag)
 
 	/* adjust the timeout to maximum if only clocksource left */
 	if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
-		sh_cmt_set_next(p, p->max_match_value);
+		__sh_cmt_set_next(p, p->max_match_value);
 
 	spin_unlock_irqrestore(&p->lock, flags);
 }

drivers/input/evdev.c

@@ -534,76 +534,73 @@ static int handle_eviocgbit(struct input_dev *dev,
 }
 #undef OLD_KEY_MAX
 
-static int evdev_handle_get_keycode(struct input_dev *dev,
-				    void __user *p, size_t size)
+static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
 {
-	struct input_keymap_entry ke;
+	struct input_keymap_entry ke = {
+		.len	= sizeof(unsigned int),
+		.flags	= 0,
+	};
+	int __user *ip = (int __user *)p;
 	int error;
 
-	memset(&ke, 0, sizeof(ke));
-
-	if (size == sizeof(unsigned int[2])) {
-		/* legacy case */
-		int __user *ip = (int __user *)p;
+	/* legacy case */
+	if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+		return -EFAULT;
 
-		if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
-			return -EFAULT;
+	error = input_get_keycode(dev, &ke);
+	if (error)
+		return error;
 
-		ke.len = sizeof(unsigned int);
-		ke.flags = 0;
+	if (put_user(ke.keycode, ip + 1))
+		return -EFAULT;
 
-		error = input_get_keycode(dev, &ke);
-		if (error)
-			return error;
+	return 0;
+}
 
-		if (put_user(ke.keycode, ip + 1))
-			return -EFAULT;
+static int evdev_handle_get_keycode_v2(struct input_dev *dev, void __user *p)
+{
+	struct input_keymap_entry ke;
+	int error;
 
-	} else {
-		size = min(size, sizeof(ke));
+	if (copy_from_user(&ke, p, sizeof(ke)))
+		return -EFAULT;
 
-		if (copy_from_user(&ke, p, size))
-			return -EFAULT;
+	error = input_get_keycode(dev, &ke);
+	if (error)
+		return error;
 
-		error = input_get_keycode(dev, &ke);
-		if (error)
-			return error;
+	if (copy_to_user(p, &ke, sizeof(ke)))
+		return -EFAULT;
 
-		if (copy_to_user(p, &ke, size))
-			return -EFAULT;
-	}
 	return 0;
 }
 
-static int evdev_handle_set_keycode(struct input_dev *dev,
-				    void __user *p, size_t size)
+static int evdev_handle_set_keycode(struct input_dev *dev, void __user *p)
 {
-	struct input_keymap_entry ke;
-
-	memset(&ke, 0, sizeof(ke));
+	struct input_keymap_entry ke = {
+		.len	= sizeof(unsigned int),
+		.flags	= 0,
+	};
+	int __user *ip = (int __user *)p;
 
-	if (size == sizeof(unsigned int[2])) {
-		/* legacy case */
-		int __user *ip = (int __user *)p;
+	if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+		return -EFAULT;
 
-		if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
-			return -EFAULT;
+	if (get_user(ke.keycode, ip + 1))
+		return -EFAULT;
 
-		if (get_user(ke.keycode, ip + 1))
-			return -EFAULT;
+	return input_set_keycode(dev, &ke);
+}
 
-		ke.len = sizeof(unsigned int);
-		ke.flags = 0;
+static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p)
+{
+	struct input_keymap_entry ke;
 
-	} else {
-		size = min(size, sizeof(ke));
+	if (copy_from_user(&ke, p, sizeof(ke)))
+		return -EFAULT;
 
-		if (copy_from_user(&ke, p, size))
-			return -EFAULT;
-
-		if (ke.len > sizeof(ke.scancode))
-			return -EINVAL;
-	}
+	if (ke.len > sizeof(ke.scancode))
+		return -EINVAL;
 
 	return input_set_keycode(dev, &ke);
 }
@@ -669,6 +666,18 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			return evdev_grab(evdev, client);
 		else
 			return evdev_ungrab(evdev, client);
+
+	case EVIOCGKEYCODE:
+		return evdev_handle_get_keycode(dev, p);
+
+	case EVIOCSKEYCODE:
+		return evdev_handle_set_keycode(dev, p);
+
+	case EVIOCGKEYCODE_V2:
+		return evdev_handle_get_keycode_v2(dev, p);
+
+	case EVIOCSKEYCODE_V2:
+		return evdev_handle_set_keycode_v2(dev, p);
 	}
 
 	size = _IOC_SIZE(cmd);
@@ -708,12 +717,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			return -EFAULT;
 
 		return error;
-
-	case EVIOC_MASK_SIZE(EVIOCGKEYCODE):
-		return evdev_handle_get_keycode(dev, p, size);
-
-	case EVIOC_MASK_SIZE(EVIOCSKEYCODE):
-		return evdev_handle_set_keycode(dev, p, size);
 	}
 
 	/* Multi-number variable-length handlers */

drivers/input/tablet/wacom_wac.c

@@ -1436,6 +1436,8 @@ static struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
 static struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023, 63, BAMBOO_PT };
+static const struct wacom_features wacom_features_0xD4 =
+	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255, 63, BAMBOO_PT };
 static struct wacom_features wacom_features_0xD8 =
 	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023, 63, BAMBOO_PT };
 static struct wacom_features wacom_features_0xDA =
@@ -1510,6 +1512,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xD1) },
 	{ USB_DEVICE_WACOM(0xD2) },
 	{ USB_DEVICE_WACOM(0xD3) },
+	{ USB_DEVICE_WACOM(0xD4) },
 	{ USB_DEVICE_WACOM(0xD8) },
 	{ USB_DEVICE_WACOM(0xDA) },
 	{ USB_DEVICE_WACOM(0xDB) },

drivers/md/dm-table.c

@@ -517,9 +517,8 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
 	 */
 
 	if (q->merge_bvec_fn && !ti->type->merge)
-		limits->max_sectors =
-			min_not_zero(limits->max_sectors,
-				     (unsigned int) (PAGE_SIZE >> 9));
+		blk_limits_max_hw_sectors(limits,
+					  (unsigned int) (PAGE_SIZE >> 9));
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dm_set_device_limits);
@@ -1131,11 +1130,6 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 	 */
 	q->limits = *limits;
 
-	if (limits->no_cluster)
-		queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
-	else
-		queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
-
 	if (!dm_table_supports_discards(t))
 		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
 	else

drivers/md/md.c

@@ -4295,9 +4295,6 @@ static int md_alloc(dev_t dev, char *name)
 		goto abort;
 	mddev->queue->queuedata = mddev;
 
-	/* Can be unlocked because the queue is new: no concurrency */
-	queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, mddev->queue);
-
 	blk_queue_make_request(mddev->queue, md_make_request);
 
 	disk = alloc_disk(1 << shift);

drivers/media/common/saa7146_hlp.c

@@ -558,7 +558,7 @@ static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, e
 static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
 {
 	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_format *sfmt = format_by_fourcc(dev, pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
 
 	int b_depth = vv->ov_fmt->depth;
 	int b_bpl = vv->ov_fb.fmt.bytesperline;
@@ -702,7 +702,7 @@ static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa71
 	struct saa7146_vv *vv = dev->vv_data;
 	struct saa7146_video_dma vdma1;
 
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 	int width = buf->fmt->width;
 	int height = buf->fmt->height;
@@ -827,7 +827,7 @@ static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa71
 	struct saa7146_video_dma vdma2;
 	struct saa7146_video_dma vdma3;
 
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 	int width = buf->fmt->width;
 	int height = buf->fmt->height;
@@ -994,7 +994,7 @@ static void program_capture_engine(struct saa7146_dev *dev, int planar)
 
 void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
 {
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 	struct saa7146_vv *vv = dev->vv_data;
 	u32 vdma1_prot_addr;
 

drivers/media/common/saa7146_video.c

@@ -84,7 +84,7 @@ static struct saa7146_format formats[] = {
 
 static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format);
 
-struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc)
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
 {
 	int i, j = NUM_FORMATS;
 
@@ -266,7 +266,7 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
 	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
 	struct scatterlist *list = dma->sglist;
 	int length = dma->sglen;
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 	DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
 
@@ -408,7 +408,7 @@ static int video_begin(struct saa7146_fh *fh)
 		}
 	}
 
-	fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
 	/* we need to have a valid format set here */
 	BUG_ON(NULL == fmt);
 
@@ -460,7 +460,7 @@ static int video_end(struct saa7146_fh *fh, struct file *file)
 		return -EBUSY;
 	}
 
-	fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
 	/* we need to have a valid format set here */
 	BUG_ON(NULL == fmt);
 
@@ -536,7 +536,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f
 		return -EPERM;
 
 	/* check args */
-	fmt = format_by_fourcc(dev, fb->fmt.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
 	if (NULL == fmt)
 		return -EINVAL;
 
@@ -760,7 +760,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_forma
 
 	DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh));
 
-	fmt = format_by_fourcc(dev, f->fmt.pix.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
 	if (NULL == fmt)
 		return -EINVAL;
 
@@ -1264,7 +1264,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 		buf->fmt       = &fh->video_fmt;
 		buf->vb.field  = fh->video_fmt.field;
 
-		sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+		sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 		release_all_pagetables(dev, buf);
 		if( 0 != IS_PLANAR(sfmt->trans)) {
@@ -1378,7 +1378,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file)
 	fh->video_fmt.pixelformat = V4L2_PIX_FMT_BGR24;
 	fh->video_fmt.bytesperline = 0;
 	fh->video_fmt.field = V4L2_FIELD_ANY;
-	sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+	sfmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
 	fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8;
 
 	videobuf_queue_sg_init(&fh->video_q, &video_qops,

drivers/media/radio/radio-aimslab.c

@@ -361,7 +361,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations rtrack_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
@@ -412,13 +412,6 @@ static int __init rtrack_init(void)
 	rt->vdev.release = video_device_release_empty;
 	video_set_drvdata(&rt->vdev, rt);
 
-	if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(&rt->v4l2_dev);
-		release_region(rt->io, 2);
-		return -EINVAL;
-	}
-	v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
-
 	/* Set up the I/O locking */
 
 	mutex_init(&rt->lock);
@@ -430,6 +423,13 @@ static int __init rtrack_init(void)
 	sleep_delay(2000000);	/* make sure it's totally down	*/
 	outb(0xc0, rt->io);		/* steady volume, mute card	*/
 
+	if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(&rt->v4l2_dev);
+		release_region(rt->io, 2);
+		return -EINVAL;
+	}
+	v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
+
 	return 0;
 }