ARM: OMAP4+: Make secondary_startup function name more consistent

Current code has rather inconsistent function names for 'secondary_startup'
routines. Update it to make it more consistent.

Suggested by Kevin Hilman as part of OMAP5 PM patch review.

Cc: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/mach-omap2/common.h

@@ -230,8 +230,8 @@ extern void omap_do_wfi(void);
 
 #ifdef CONFIG_SMP
 /* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern void omap_secondary_startup_4460(void);
+extern void omap4_secondary_startup(void);
+extern void omap4460_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);

arch/arm/mach-omap2/omap-headsmp.S

@@ -49,7 +49,7 @@ END(omap5_secondary_startup)
  * The primary core will update this flag using a hardware
  * register AuxCoreBoot0.
  */
-ENTRY(omap_secondary_startup)
+ENTRY(omap4_secondary_startup)
 hold:	ldr	r12,=0x103
 	dsb
 	smc	#0			@ read from AuxCoreBoot0
@@ -64,9 +64,9 @@ hold:	ldr	r12,=0x103
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
-ENDPROC(omap_secondary_startup)
+ENDPROC(omap4_secondary_startup)
 
-ENTRY(omap_secondary_startup_4460)
+ENTRY(omap4460_secondary_startup)
 hold_2:	ldr	r12,=0x103
 	dsb
 	smc	#0			@ read from AuxCoreBoot0
@@ -101,4 +101,4 @@ hold_2:	ldr	r12,=0x103
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
-ENDPROC(omap_secondary_startup_4460)
+ENDPROC(omap4460_secondary_startup)

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -324,7 +324,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 	/*
 	 * CPU never retuns back if targeted power state is OFF mode.
 	 * CPU ONLINE follows normal CPU ONLINE ptah via
-	 * omap_secondary_startup().
+	 * omap4_secondary_startup().
 	 */
 	omap_pm_ops.finish_suspend(cpu_state);
 
@@ -370,9 +370,9 @@ int __init omap4_mpuss_init(void)
 	pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
 	pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
 	if (cpu_is_omap446x())
-		pm_info->secondary_startup = omap_secondary_startup_4460;
+		pm_info->secondary_startup = omap4460_secondary_startup;
 	else
-		pm_info->secondary_startup = omap_secondary_startup;
+		pm_info->secondary_startup = omap4_secondary_startup;
 
 	pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
 	if (!pm_info->pwrdm) {

arch/arm/mach-omap2/omap-smp.c

@@ -93,7 +93,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
 
 	/*
 	 * Update the AuxCoreBoot0 with boot state for secondary core.
-	 * omap_secondary_startup() routine will hold the secondary core till
+	 * omap4_secondary_startup() routine will hold the secondary core till
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
@@ -199,7 +199,7 @@ static void __init omap4_smp_init_cpus(void)
 
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void *startup_addr = omap_secondary_startup;
+	void *startup_addr = omap4_secondary_startup;
 	void __iomem *base = omap_get_wakeupgen_base();
 
 	/*
@@ -210,7 +210,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 		scu_enable(scu_base);
 
 	if (cpu_is_omap446x()) {
-		startup_addr = omap_secondary_startup_4460;
+		startup_addr = omap4460_secondary_startup;
 		pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
 	}