Merge tag 'usb-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a few small USB fixes and new device ids for 4.9-rc7.

  The majority of these fixes are in the musb driver, fixing a number of
  regressions that have been reported but took a while to resolve. The
  other fixes are all small ones, to resolve other reported minor
  issues.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match()
  phy: twl4030-usb: Fix for musb session bit based PM
  usb: musb: Drop pointless PM runtime code for dsps glue
  usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
  usb: musb: Fix PM for hub disconnect
  usb: musb: Fix sleeping function called from invalid context for hdrc glue
  usb: musb: Fix broken use of static variable for multiple instances
  USB: serial: cp210x: add ID for the Zone DPMX
  usb: chipidea: move the lock initialization to core file
  Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
  USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

drivers/phy/phy-twl4030-usb.c

@@ -459,8 +459,6 @@ static int twl4030_phy_power_off(struct phy *phy)
 	struct twl4030_usb *twl = phy_get_drvdata(phy);
 
 	dev_dbg(twl->dev, "%s\n", __func__);
-	pm_runtime_mark_last_busy(twl->dev);
-	pm_runtime_put_autosuspend(twl->dev);
 
 	return 0;
 }
@@ -472,6 +470,8 @@ static int twl4030_phy_power_on(struct phy *phy)
 	dev_dbg(twl->dev, "%s\n", __func__);
 	pm_runtime_get_sync(twl->dev);
 	schedule_delayed_work(&twl->id_workaround_work, HZ);
+	pm_runtime_mark_last_busy(twl->dev);
+	pm_runtime_put_autosuspend(twl->dev);
 
 	return 0;
 }

drivers/usb/chipidea/core.c

@@ -914,6 +914,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (!ci)
 		return -ENOMEM;
 
+	spin_lock_init(&ci->lock);
 	ci->dev = dev;
 	ci->platdata = dev_get_platdata(dev);
 	ci->imx28_write_fix = !!(ci->platdata->flags &

drivers/usb/chipidea/udc.c

@@ -1889,8 +1889,6 @@ static int udc_start(struct ci_hdrc *ci)
 	struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
 	int retval = 0;
 
-	spin_lock_init(&ci->lock);
-
 	ci->gadget.ops          = &usb_gadget_ops;
 	ci->gadget.speed        = USB_SPEED_UNKNOWN;
 	ci->gadget.max_speed    = USB_SPEED_HIGH;

drivers/usb/gadget/function/f_fs.c

@@ -3225,11 +3225,11 @@ static bool ffs_func_req_match(struct usb_function *f,
 
 	switch (creq->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_INTERFACE:
-		return ffs_func_revmap_intf(func,
-					    le16_to_cpu(creq->wIndex) >= 0);
+		return (ffs_func_revmap_intf(func,
+					     le16_to_cpu(creq->wIndex)) >= 0);
 	case USB_RECIP_ENDPOINT:
-		return ffs_func_revmap_ep(func,
-					  le16_to_cpu(creq->wIndex) >= 0);
+		return (ffs_func_revmap_ep(func,
+					   le16_to_cpu(creq->wIndex)) >= 0);
 	default:
 		return (bool) (func->ffs->user_flags &
 			       FUNCTIONFS_ALL_CTRL_RECIP);

drivers/usb/musb/musb_core.c

@@ -986,7 +986,7 @@ b_host:
 	}
 #endif
 
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	return handled;
 }
@@ -1855,14 +1855,23 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		MUSB_DEVCTL_HR;
 	switch (devctl & ~s) {
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
-		if (!musb->session && !musb->quirk_invalid_vbus) {
-			musb->quirk_invalid_vbus = true;
+		if (musb->quirk_retries--) {
 			musb_dbg(musb,
-				 "First invalid vbus, assume no session");
+				 "Poll devctl on invalid vbus, assume no session");
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(1000));
+
 			return;
 		}
-		break;
 	case MUSB_QUIRK_A_DISCONNECT_19:
+		if (musb->quirk_retries--) {
+			musb_dbg(musb,
+				 "Poll devctl on possible host mode disconnect");
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(1000));
+
+			return;
+		}
 		if (!musb->session)
 			break;
 		musb_dbg(musb, "Allow PM on possible host mode disconnect");
@@ -1886,9 +1895,9 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		if (error < 0)
 			dev_err(musb->controller, "Could not enable: %i\n",
 				error);
+		musb->quirk_retries = 3;
 	} else {
 		musb_dbg(musb, "Allow PM with no session: %02x", devctl);
-		musb->quirk_invalid_vbus = false;
 		pm_runtime_mark_last_busy(musb->controller);
 		pm_runtime_put_autosuspend(musb->controller);
 	}
@@ -1899,7 +1908,7 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 /* Only used to provide driver mode change events */
 static void musb_irq_work(struct work_struct *data)
 {
-	struct musb *musb = container_of(data, struct musb, irq_work);
+	struct musb *musb = container_of(data, struct musb, irq_work.work);
 
 	musb_pm_runtime_check_session(musb);
 
@@ -1969,6 +1978,7 @@ static struct musb *allocate_instance(struct device *dev,
 	INIT_LIST_HEAD(&musb->control);
 	INIT_LIST_HEAD(&musb->in_bulk);
 	INIT_LIST_HEAD(&musb->out_bulk);
+	INIT_LIST_HEAD(&musb->pending_list);
 
 	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
@@ -2018,6 +2028,84 @@ static void musb_free(struct musb *musb)
 	musb_host_free(musb);
 }
 
+struct musb_pending_work {
+	int (*callback)(struct musb *musb, void *data);
+	void *data;
+	struct list_head node;
+};
+
+/*
+ * Called from musb_runtime_resume(), musb_resume(), and
+ * musb_queue_resume_work(). Callers must take musb->lock.
+ */
+static int musb_run_resume_work(struct musb *musb)
+{
+	struct musb_pending_work *w, *_w;
+	unsigned long flags;
+	int error = 0;
+
+	spin_lock_irqsave(&musb->list_lock, flags);
+	list_for_each_entry_safe(w, _w, &musb->pending_list, node) {
+		if (w->callback) {
+			error = w->callback(musb, w->data);
+			if (error < 0) {
+				dev_err(musb->controller,
+					"resume callback %p failed: %i\n",
+					w->callback, error);
+			}
+		}
+		list_del(&w->node);
+		devm_kfree(musb->controller, w);
+	}
+	spin_unlock_irqrestore(&musb->list_lock, flags);
+
+	return error;
+}
+
+/*
+ * Called to run work if device is active or else queue the work to happen
+ * on resume. Caller must take musb->lock and must hold an RPM reference.
+ *
+ * Note that we cowardly refuse queuing work after musb PM runtime
+ * resume is done calling musb_run_resume_work() and return -EINPROGRESS
+ * instead.
+ */
+int musb_queue_resume_work(struct musb *musb,
+			   int (*callback)(struct musb *musb, void *data),
+			   void *data)
+{
+	struct musb_pending_work *w;
+	unsigned long flags;
+	int error;
+
+	if (WARN_ON(!callback))
+		return -EINVAL;
+
+	if (pm_runtime_active(musb->controller))
+		return callback(musb, data);
+
+	w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC);
+	if (!w)
+		return -ENOMEM;
+
+	w->callback = callback;
+	w->data = data;
+	spin_lock_irqsave(&musb->list_lock, flags);
+	if (musb->is_runtime_suspended) {
+		list_add_tail(&w->node, &musb->pending_list);
+		error = 0;
+	} else {
+		dev_err(musb->controller, "could not add resume work %p\n",
+			callback);
+		devm_kfree(musb->controller, w);
+		error = -EINPROGRESS;
+	}
+	spin_unlock_irqrestore(&musb->list_lock, flags);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(musb_queue_resume_work);
+
 static void musb_deassert_reset(struct work_struct *work)
 {
 	struct musb *musb;
@@ -2065,6 +2153,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	}
 
 	spin_lock_init(&musb->lock);
+	spin_lock_init(&musb->list_lock);
 	musb->board_set_power = plat->set_power;
 	musb->min_power = plat->min_power;
 	musb->ops = plat->platform_ops;
@@ -2208,7 +2297,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb_generic_disable(musb);
 
 	/* Init IRQ workqueue before request_irq */
-	INIT_WORK(&musb->irq_work, musb_irq_work);
+	INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
 	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
 	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
 
@@ -2291,6 +2380,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status)
 		goto fail5;
 
+	musb->is_initialized = 1;
 	pm_runtime_mark_last_busy(musb->controller);
 	pm_runtime_put_autosuspend(musb->controller);
 
@@ -2304,7 +2394,7 @@ fail4:
 	musb_host_cleanup(musb);
 
 fail3:
-	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
@@ -2371,7 +2461,7 @@ static int musb_remove(struct platform_device *pdev)
 	 */
 	musb_exit_debugfs(musb);
 
-	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	pm_runtime_get_sync(musb->controller);
@@ -2557,6 +2647,7 @@ static int musb_suspend(struct device *dev)
 
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
+	WARN_ON(!list_empty(&musb->pending_list));
 
 	spin_lock_irqsave(&musb->lock, flags);
 
@@ -2578,9 +2669,11 @@ static int musb_suspend(struct device *dev)
 
 static int musb_resume(struct device *dev)
 {
-	struct musb	*musb = dev_to_musb(dev);
-	u8		devctl;
-	u8		mask;
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int error;
+	u8 devctl;
+	u8 mask;
 
 	/*
 	 * For static cmos like DaVinci, register values were preserved
@@ -2614,6 +2707,13 @@ static int musb_resume(struct device *dev)
 
 	musb_start(musb);
 
+	spin_lock_irqsave(&musb->lock, flags);
+	error = musb_run_resume_work(musb);
+	if (error)
+		dev_err(musb->controller, "resume work failed with %i\n",
+			error);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
 	return 0;
 }
 
@@ -2622,14 +2722,16 @@ static int musb_runtime_suspend(struct device *dev)
 	struct musb	*musb = dev_to_musb(dev);
 
 	musb_save_context(musb);
+	musb->is_runtime_suspended = 1;
 
 	return 0;
 }
 
 static int musb_runtime_resume(struct device *dev)
 {
-	struct musb	*musb = dev_to_musb(dev);
-	static int	first = 1;
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int error;
 
 	/*
 	 * When pm_runtime_get_sync called for the first time in driver
@@ -2640,9 +2742,10 @@ static int musb_runtime_resume(struct device *dev)
 	 * Also context restore without save does not make
 	 * any sense
 	 */
-	if (!first)
-		musb_restore_context(musb);
-	first = 0;
+	if (!musb->is_initialized)
+		return 0;
+
+	musb_restore_context(musb);
 
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
@@ -2650,6 +2753,14 @@ static int musb_runtime_resume(struct device *dev)
 				msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
+	spin_lock_irqsave(&musb->lock, flags);
+	error = musb_run_resume_work(musb);
+	if (error)
+		dev_err(musb->controller, "resume work failed with %i\n",
+			error);
+	musb->is_runtime_suspended = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
 	return 0;
 }
 

drivers/usb/musb/musb_core.h

@@ -303,13 +303,14 @@ struct musb_context_registers {
 struct musb {
 	/* device lock */
 	spinlock_t		lock;
+	spinlock_t		list_lock;	/* resume work list lock */
 
 	struct musb_io		io;
 	const struct musb_platform_ops *ops;
 	struct musb_context_registers context;
 
 	irqreturn_t		(*isr)(int, void *);
-	struct work_struct	irq_work;
+	struct delayed_work	irq_work;
 	struct delayed_work	deassert_reset_work;
 	struct delayed_work	finish_resume_work;
 	struct delayed_work	gadget_work;
@@ -337,6 +338,7 @@ struct musb {
 	struct list_head	control;	/* of musb_qh */
 	struct list_head	in_bulk;	/* of musb_qh */
 	struct list_head	out_bulk;	/* of musb_qh */
+	struct list_head	pending_list;	/* pending work list */
 
 	struct timer_list	otg_timer;
 	struct notifier_block	nb;
@@ -379,12 +381,15 @@ struct musb {
 
 	int			port_mode;	/* MUSB_PORT_MODE_* */
 	bool			session;
-	bool			quirk_invalid_vbus;
+	unsigned long		quirk_retries;
 	bool			is_host;
 
 	int			a_wait_bcon;	/* VBUS timeout in msecs */
 	unsigned long		idle_timeout;	/* Next timeout in jiffies */
 
+	unsigned		is_initialized:1;
+	unsigned		is_runtime_suspended:1;
+
 	/* active means connected and not suspended */
 	unsigned		is_active:1;
 
@@ -540,6 +545,10 @@ extern irqreturn_t musb_interrupt(struct musb *);
 
 extern void musb_hnp_stop(struct musb *musb);
 
+int musb_queue_resume_work(struct musb *musb,
+			   int (*callback)(struct musb *musb, void *data),
+			   void *data);
+
 static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
 {
 	if (musb->ops->set_vbus)

drivers/usb/musb/musb_dsps.c

@@ -185,24 +185,19 @@ static void dsps_musb_disable(struct musb *musb)
 	musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
 	musb_writel(reg_base, wrp->epintr_clear,
 			 wrp->txep_bitmap | wrp->rxep_bitmap);
+	del_timer_sync(&glue->timer);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 }
 
-static void otg_timer(unsigned long _musb)
+/* Caller must take musb->lock */
+static int dsps_check_status(struct musb *musb, void *unused)
 {
-	struct musb *musb = (void *)_musb;
 	void __iomem *mregs = musb->mregs;
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	u8 devctl;
-	unsigned long flags;
 	int skip_session = 0;
-	int err;
-
-	err = pm_runtime_get_sync(dev);
-	if (err < 0)
-		dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
 
 	/*
 	 * We poll because DSPS IP's won't expose several OTG-critical
@@ -212,7 +207,6 @@ static void otg_timer(unsigned long _musb)
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
 				usb_otg_state_string(musb->xceiv->otg->state));
 
-	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_A_WAIT_VRISE:
 		mod_timer(&glue->timer, jiffies +
@@ -245,8 +239,30 @@ static void otg_timer(unsigned long _musb)
 	default:
 		break;
 	}
-	spin_unlock_irqrestore(&musb->lock, flags);
 
+	return 0;
+}
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb *musb = (void *)_musb;
+	struct device *dev = musb->controller;
+	unsigned long flags;
+	int err;
+
+	err = pm_runtime_get(dev);
+	if ((err != -EINPROGRESS) && err < 0) {
+		dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
+		pm_runtime_put_noidle(dev);
+
+		return;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	err = musb_queue_resume_work(musb, dsps_check_status, NULL);
+	if (err < 0)
+		dev_err(dev, "%s resume work: %i\n", __func__, err);
+	spin_unlock_irqrestore(&musb->lock, flags);
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 }
@@ -767,28 +783,13 @@ static int dsps_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, glue);
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 200);
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
-		goto err2;
-	}
-
 	ret = dsps_create_musb_pdev(glue, pdev);
 	if (ret)
-		goto err3;
-
-	pm_runtime_mark_last_busy(&pdev->dev);
-	pm_runtime_put_autosuspend(&pdev->dev);
+		goto err;
 
 	return 0;
 
-err3:
-	pm_runtime_put_sync(&pdev->dev);
-err2:
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
+err:
 	pm_runtime_disable(&pdev->dev);
 	return ret;
 }
@@ -799,9 +800,6 @@ static int dsps_remove(struct platform_device *pdev)
 
 	platform_device_unregister(glue->musb);
 
-	/* disable usbss clocks */
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
-	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;

drivers/usb/musb/musb_gadget.c

@@ -1114,7 +1114,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 			musb_ep->dma ? "dma, " : "",
 			musb_ep->packet_sz);
 
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 fail:
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -1158,7 +1158,7 @@ static int musb_gadget_disable(struct usb_ep *ep)
 	musb_ep->desc = NULL;
 	musb_ep->end_point.desc = NULL;
 
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	spin_unlock_irqrestore(&(musb->lock), flags);
 
@@ -1222,13 +1222,22 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)
 		rxstate(musb, req);
 }
 
+static int musb_ep_restart_resume_work(struct musb *musb, void *data)
+{
+	struct musb_request *req = data;
+
+	musb_ep_restart(musb, req);
+
+	return 0;
+}
+
 static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 			gfp_t gfp_flags)
 {
 	struct musb_ep		*musb_ep;
 	struct musb_request	*request;
 	struct musb		*musb;
-	int			status = 0;
+	int			status;
 	unsigned long		lockflags;
 
 	if (!ep || !req)
@@ -1245,6 +1254,17 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	if (request->ep != musb_ep)
 		return -EINVAL;
 
+	status = pm_runtime_get(musb->controller);
+	if ((status != -EINPROGRESS) && status < 0) {
+		dev_err(musb->controller,
+			"pm runtime get failed in %s\n",
+			__func__);
+		pm_runtime_put_noidle(musb->controller);
+
+		return status;
+	}
+	status = 0;
+
 	trace_musb_req_enq(request);
 
 	/* request is mine now... */
@@ -1255,7 +1275,6 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 
 	map_dma_buffer(request, musb, musb_ep);
 
-	pm_runtime_get_sync(musb->controller);
 	spin_lock_irqsave(&musb->lock, lockflags);
 
 	/* don't queue if the ep is down */
@@ -1271,8 +1290,14 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	list_add_tail(&request->list, &musb_ep->req_list);
 
 	/* it this is the head of the queue, start i/o ... */
-	if (!musb_ep->busy && &request->list == musb_ep->req_list.next)
-		musb_ep_restart(musb, request);
+	if (!musb_ep->busy && &request->list == musb_ep->req_list.next) {
+		status = musb_queue_resume_work(musb,
+						musb_ep_restart_resume_work,
+						request);
+		if (status < 0)
+			dev_err(musb->controller, "%s resume work: %i\n",
+				__func__, status);
+	}
 
 unlock:
 	spin_unlock_irqrestore(&musb->lock, lockflags);
@@ -1969,7 +1994,7 @@ static int musb_gadget_stop(struct usb_gadget *g)
 	 */
 
 	/* Force check of devctl register for PM runtime */
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	pm_runtime_mark_last_busy(musb->controller);
 	pm_runtime_put_autosuspend(musb->controller);

drivers/usb/musb/omap2430.c

@@ -513,17 +513,18 @@ static int omap2430_probe(struct platform_device *pdev)
 	}
 
 	pm_runtime_enable(glue->dev);
-	pm_runtime_use_autosuspend(glue->dev);
-	pm_runtime_set_autosuspend_delay(glue->dev, 100);
 
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err3;
 	}
 
 	return 0;
 
+err3:
+	pm_runtime_disable(glue->dev);
+
 err2:
 	platform_device_put(musb);
 
@@ -535,10 +536,7 @@ static int omap2430_remove(struct platform_device *pdev)
 {
 	struct omap2430_glue *glue = platform_get_drvdata(pdev);
 
-	pm_runtime_get_sync(glue->dev);
 	platform_device_unregister(glue->musb);
-	pm_runtime_put_sync(glue->dev);
-	pm_runtime_dont_use_autosuspend(glue->dev);
 	pm_runtime_disable(glue->dev);
 
 	return 0;

drivers/usb/musb/tusb6010.c

@@ -724,7 +724,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
 				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 			idle_timeout = jiffies + (1 * HZ);
-			schedule_work(&musb->irq_work);
+			schedule_delayed_work(&musb->irq_work, 0);
 
 		} else /* A-dev state machine */ {
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
@@ -814,7 +814,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			break;
 		}
 	}
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	return idle_timeout;
 }
@@ -864,7 +864,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
 		musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
 		if (reg & ~TUSB_PRCM_WNORCS) {
 			musb->is_active = 1;
-			schedule_work(&musb->irq_work);
+			schedule_delayed_work(&musb->irq_work, 0);
 		}
 		dev_dbg(musb->controller, "wake %sactive %02x\n",
 				musb->is_active ? "" : "in", reg);

drivers/usb/serial/cp210x.c

@@ -131,6 +131,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */

drivers/usb/serial/ftdi_sio.c

@@ -1012,6 +1012,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
 	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
+	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/ftdi_sio_ids.h

@@ -595,6 +595,12 @@
 #define ATMEL_VID		0x03eb /* Vendor ID */
 #define STK541_PID		0x2109 /* Zigbee Controller */
 
+/*
+ * Texas Instruments
+ */
+#define TI_VID			0x0451
+#define TI_CC3200_LAUNCHPAD_PID	0xC32A /* SimpleLink Wi-Fi CC3200 LaunchPad */
+
 /*
  * Blackfin gnICE JTAG
  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice

drivers/usb/storage/transport.c

@@ -954,10 +954,15 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* COMMAND STAGE */
 	/* let's send the command via the control pipe */
+	/*
+	 * Command is sometime (f.e. after scsi_eh_prep_cmnd) on the stack.
+	 * Stack may be vmallocated.  So no DMA for us.  Make a copy.
+	 */
+	memcpy(us->iobuf, srb->cmnd, srb->cmd_len);
 	result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 				      US_CBI_ADSC, 
 				      USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, 
-				      us->ifnum, srb->cmnd, srb->cmd_len);
+				      us->ifnum, us->iobuf, srb->cmd_len);
 
 	/* check the return code for the command */
 	usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n",