arm64: uniphier: dts: add more clocks to Denali NAND controller node

Catch up with the new binding of the Denali IP where three clocks,
"nand", "nand_x", "ecc" are required.

For UniPhier SoCs, the "nand_x" and "ecc" are tied up because they
are both 200MHz.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi

@@ -571,7 +571,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

@@ -628,7 +628,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi

@@ -455,7 +455,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};