Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - PowerNV PCI hotplug support.
   - Lots more Power9 support.
   - eBPF JIT support on ppc64le.
   - Lots of cxl updates.
   - Boot code consolidation.

  Bug fixes:
   - Fix spin_unlock_wait() from Boqun Feng
   - Fix stack pointer corruption in __tm_recheckpoint() from Michael
     Neuling
   - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
   - mm: Ensure "special" zones are empty from Oliver O'Halloran
   - ftrace: Separate the heuristics for checking call sites from
     Michael Ellerman
   - modules: Never restore r2 for a mprofile-kernel style mcount() call
     from Michael Ellerman
   - Fix endianness when reading TCEs from Alexey Kardashevskiy
   - start rtasd before PCI probing from Greg Kurz
   - PCI: rpaphp: Fix slot registration for multiple slots under a PHB
     from Tyrel Datwyler
   - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
     Bhattiprolu

  Cleanups & fixes:
   - Drop support for MPIC in pseries from Rashmica Gupta
   - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
   - Remove unused symbols in asm-offsets.c from Rashmica Gupta
   - Fix SRIOV not building without EEH enabled from Russell Currey
   - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
   - Reduce log level of PCI I/O space warning from Benjamin
     Herrenschmidt
   - Add array bounds checking to crash_shutdown_handlers from Suraj
     Jitindar Singh
   - Avoid -maltivec when using clang integrated assembler from Anton
     Blanchard
   - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
   - Fix error return value in cmm_mem_going_offline() from Rasmus
     Villemoes
   - export cpu_to_core_id() from Mauricio Faria de Oliveira
   - Remove old symbols from defconfigs from Andrew Donnellan
   - Update obsolete comments in setup_32.c about entry conditions from
     Benjamin Herrenschmidt
   - Add comment explaining the purpose of setup_kdump_trampoline() from
     Benjamin Herrenschmidt
   - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
     Hao
   - Remove RELOCATABLE_PPC32 from Kevin Hao
   - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh

  Minor cleanups & fixes:
   - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
     Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
     Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
     Michael Ellerman, Stephen Rothwell, Stewart Smith.

  Freescale updates from Scott:
   - "Highlights include more 8xx optimizations, device tree updates,
     and MVME7100 support."

  PowerNV PCI hotplug from Gavin Shan:
   - PCI: Add pcibios_setup_bridge()
   - Override pcibios_setup_bridge()
   - Remove PCI_RESET_DELAY_US
   - Move pnv_pci_ioda_setup_opal_tce_kill() around
   - Increase PE# capacity
   - Allocate PE# in reverse order
   - Create PEs in pcibios_setup_bridge()
   - Setup PE for root bus
   - Extend PCI bridge resources
   - Make pnv_ioda_deconfigure_pe() visible
   - Dynamically release PE
   - Update bridge windows on PCI plug
   - Delay populating pdn
   - Support PCI slot ID
   - Use PCI slot reset infrastructure
   - Introduce pnv_pci_get_slot_id()
   - Functions to get/set PCI slot state
   - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
   - Print correct PHB type names

  Power9 idle support from Shreyas B. Prabhu:
   - set power_save func after the idle states are initialized
   - Use PNV_THREAD_WINKLE macro while requesting for winkle
   - make hypervisor state restore a function
   - Rename idle_power7.S to idle_book3s.S
   - Rename reusable idle functions to hardware agnostic names
   - Make pnv_powersave_common more generic
   - abstraction for saving SPRs before entering deep idle states
   - Add platform support for stop instruction
   - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
   - cpuidle/powernv: cleanup cpuidle-powernv.c
   - cpuidle/powernv: Add support for POWER ISA v3 idle states
   - Use deepest stop state when cpu is offlined

  Power9 PMU from Madhavan Srinivasan:
   - factor out power8 pmu macros and defines
   - factor out power8 pmu functions
   - factor out power8 __init_pmu code
   - Add power9 event list macros for generic and cache events
   - Power9 PMU support
   - Export Power9 generic and cache events to sysfs

  Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
   - Add XICS emulation APIs
   - Move a few exception common handlers to make room
   - Add support for HV virtualization interrupts
   - Add mechanism to force a replay of interrupts
   - Add ICP OPAL backend
   - Discover IODA3 PHBs
   - pci: Remove obsolete SW invalidate
   - opal: Add real mode call wrappers
   - Rename TCE invalidation calls
   - Remove SWINV constants and obsolete TCE code
   - Rework accessing the TCE invalidate register
   - Fallback to OPAL for TCE invalidations
   - Use the device-tree to get available range of M64's
   - Check status of a PHB before using it
   - pci: Don't try to allocate resources that will be reassigned

  Other Power9:
   - Send SIGBUS on unaligned copy and paste from Chris Smart
   - Large Decrementer support from Oliver O'Halloran
   - Load Monitor Register Support from Jack Miller

  Performance improvements from Anton Blanchard:
   - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
   - Avoid load hit store in setup_sigcontext()
   - Remove assembly versions of strcpy, strcat, strlen and strcmp
   - Align hot loops of some string functions

  eBPF JIT from Naveen N. Rao:
   - Fix/enhance 32-bit Load Immediate implementation
   - Optimize 64-bit Immediate loads
   - Introduce rotate immediate instructions
   - A few cleanups
   - Isolate classic BPF JIT specifics into a separate header
   - Implement JIT compiler for extended BPF

  Operator Panel driver from Suraj Jitindar Singh:
   - devicetree/bindings: Add binding for operator panel on FSP machines
   - Add inline function to get rc from an ASYNC_COMP opal_msg
   - Add driver for operator panel on FSP machines

  Sparse fixes from Daniel Axtens:
   - make some things static
   - Introduce asm-prototypes.h
   - Include headers containing prototypes
   - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
   - kvm: Clarify __user annotations
   - Pass endianness to sparse
   - Make ppc_md.{halt, restart} __noreturn

  MM fixes & cleanups from Aneesh Kumar K.V:
   - radix: Update LPCR HR bit as per ISA
   - use _raw variant of page table accessors
   - Compile out radix related functions if RADIX_MMU is disabled
   - Clear top 16 bits of va only on older cpus
   - Print formation regarding the the MMU mode
   - hash: Update SDR1 size encoding as documented in ISA 3.0
   - radix: Update PID switch sequence
   - radix: Update machine call back to support new HCALL.
   - radix: Add LPID based tlb flush helpers
   - radix: Add a kernel command line to disable radix
   - Cleanup LPCR defines

  Boot code consolidation from Benjamin Herrenschmidt:
   - Move epapr_paravirt_early_init() to early_init_devtree()
   - cell: Don't use flat device-tree after boot
   - ge_imp3a: Don't use the flat device-tree after boot
   - mpc85xx_ds: Don't use the flat device-tree after boot
   - mpc85xx_rdb: Don't use the flat device-tree after boot
   - Don't test for machine type in rtas_initialize()
   - Don't test for machine type in smp_setup_cpu_maps()
   - dt: Add of_device_compatible_match()
   - Factor do_feature_fixup calls
   - Move 64-bit feature fixup earlier
   - Move 64-bit memory reserves to setup_arch()
   - Use a cachable DART
   - Move FW feature probing out of pseries probe()
   - Put exception configuration in a common place
   - Remove early allocation of the SMU command buffer
   - Move MMU backend selection out of platform code
   - pasemi: Remove IOBMAP allocation from platform probe()
   - mm/hash: Don't use machine_is() early during boot
   - Don't test for machine type to detect HEA special case
   - pmac: Remove spurrious machine type test
   - Move hash table ops to a separate structure
   - Ensure that ppc_md is empty before probing for machine type
   - Move 64-bit probe_machine() to later in the boot process
   - Move 32-bit probe() machine to later in the boot process
   - Get rid of ppc_md.init_early()
   - Move the boot time info banner to a separate function
   - Move setting of {i,d}cache_bsize to initialize_cache_info()
   - Move the content of setup_system() to setup_arch()
   - Move cache info inits to a separate function
   - Re-order the call to smp_setup_cpu_maps()
   - Re-order setup_panic()
   - Make a few boot functions __init
   - Merge 32-bit and 64-bit setup_arch()

  Other new features:
   - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
   - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
   - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
   - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
   - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
   - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
   - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
   - Add a parameter to disable 1TB segs from Oliver O'Halloran
   - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
   - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
   - pseries: Add pseries hotplug workqueue from John Allen
   - pseries: Add support for hotplug interrupt source from John Allen
   - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
   - pseries: Move property cloning into its own routine from Nathan Fontenot
   - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
   - pseries: Auto-online hotplugged memory from Nathan Fontenot
   - pseries: Remove call to memblock_add() from Nathan Fontenot

  cxl:
   - Add set and get private data to context struct from Michael Neuling
   - make base more explicitly non-modular from Paul Gortmaker
   - Use for_each_compatible_node() macro from Wei Yongjun
   - Frederic Barrat
   - Abstract the differences between the PSL and XSL
   - Make vPHB device node match adapter's
   - Philippe Bergheaud
   - Add mechanism for delivering AFU driver specific events
   - Ignore CAPI adapters misplaced in switched slots
   - Refine slice error debug messages
   - Andrew Donnellan
   - static-ify variables to fix sparse warnings
   - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
   - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
   - Add cxl_check_and_switch_mode() API to switch bi-modal cards
   - remove dead Kconfig options
   - fix potential NULL dereference in free_adapter()
   - Ian Munsie
   - Update process element after allocating interrupts
   - Add support for CAPP DMA mode
   - Fix allowing bogus AFU descriptors with 0 maximum processes
   - Fix allocating a minimum of 2 pages for the SPA
   - Fix bug where AFU disable operation had no effect
   - Workaround XSL bug that does not clear the RA bit after a reset
   - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
   - powerpc/powernv: Split cxl code out into a separate file
   - Add cxl_slot_is_supported API
   - Enable bus mastering for devices using CAPP DMA mode
   - Move cxl_afu_get / cxl_afu_put to base
   - Allow a default context to be associated with an external pci_dev
   - Do not create vPHB if there are no AFU configuration records
   - powerpc/powernv: Add support for the cxl kernel api on the real phb
   - Add support for using the kernel API with a real PHB
   - Add kernel APIs to get & set the max irqs per context
   - Add preliminary workaround for CX4 interrupt limitation
   - Add support for interrupts on the Mellanox CX4
   - Workaround PE=0 hardware limitation in Mellanox CX4
   - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n

  selftests:
   - Test unaligned copy and paste from Chris Smart
   - Load Monitor Register Tests from Jack Miller
   - Cyril Bur
   - exec() with suspended transaction
   - Use signed long to read perf_event_paranoid
   - Fix usage message in context_switch
   - Fix generation of vector instructions/types in context_switch
   - Michael Ellerman
   - Use "Delta" rather than "Error" in normal output
   - Import Anton's mmap & futex micro benchmarks
   - Add a test for PROT_SAO"

* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
  powerpc/mm: Parenthesise IS_ENABLED() in if condition
  tty/hvc: Use opal irqchip interface if available
  tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
  selftests/powerpc: exec() with suspended transaction
  powerpc: Improve comment explaining why we modify VRSAVE
  powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
  powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
  powerpc/mm: Fix build break when PPC_NATIVE=n
  crypto: vmx - Convert to CPU feature based module autoloading
  powerpc: Add module autoloading based on CPU features
  powerpc/powernv/ioda: Fix endianness when reading TCEs
  powerpc/mm: Add memory barrier in __hugepte_alloc()
  powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
  powerpc/ftrace: Separate the heuristics for checking call sites
  powerpc: Merge 32-bit and 64-bit setup_arch()
  powerpc/64: Make a few boot functions __init
  powerpc: Re-order setup_panic()
  powerpc: Re-order the call to smp_setup_cpu_maps()
  powerpc/32: Move cache info inits to a separate function
  powerpc/64: Move the content of setup_system() to setup_arch()
  ...

Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt

@@ -1,43 +0,0 @@
-* Network
-
-Currently defined compatibles:
-- fsl,cpm1-scc-enet
-- fsl,cpm2-scc-enet
-- fsl,cpm1-fec-enet
-- fsl,cpm2-fcc-enet (third resource is GFEMR)
-- fsl,qe-enet
-
-Example:
-
-	ethernet@11300 {
-		compatible = "fsl,mpc8272-fcc-enet",
-			     "fsl,cpm2-fcc-enet";
-		reg = <11300 20 8400 100 11390 1>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		interrupts = <20 8>;
-		interrupt-parent = <&PIC>;
-		phy-handle = <&PHY0>;
-		fsl,cpm-command = <12000300>;
-	};
-
-* MDIO
-
-Currently defined compatibles:
-fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
-fsl,cpm2-mdio-bitbang (reg is port C registers)
-
-Properties for fsl,cpm2-mdio-bitbang:
-fsl,mdio-pin : pin of port C controlling mdio data
-fsl,mdc-pin : pin of port C controlling mdio clock
-
-Example:
-	mdio@10d40 {
-		compatible = "fsl,mpc8272ads-mdio-bitbang",
-			     "fsl,mpc8272-mdio-bitbang",
-			     "fsl,cpm2-mdio-bitbang";
-		reg = <10d40 14>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fsl,mdio-pin = <12>;
-		fsl,mdc-pin = <13>;
-	};

Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt

@@ -0,0 +1,14 @@
+IBM OPAL Operator Panel Binding
+-------------------------------
+
+Required properties:
+- compatible : Should be "ibm,opal-oppanel".
+- #lines     : Number of lines on the operator panel e.g. <0x2>.
+- #length    : Number of characters per line of the operator panel e.g. <0x10>.
+
+Example:
+	oppanel {
+		compatible = "ibm,opal-oppanel";
+		#lines = <0x2>;
+		#length = <0x10>;
+	};

Documentation/devicetree/bindings/rtc/rtc-opal.txt

@@ -2,7 +2,7 @@ IBM OPAL real-time clock
 ------------------------
 
 Required properties:
-- comapatible: Should be "ibm,opal-rtc"
+- compatible: Should be "ibm,opal-rtc"
 
 Optional properties:
 - wakeup-source: Decides if the wakeup is supported or not

Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt

@@ -0,0 +1,124 @@
+* Network
+
+Currently defined compatibles:
+- fsl,cpm1-scc-enet
+- fsl,cpm2-scc-enet
+- fsl,cpm1-fec-enet
+- fsl,cpm2-fcc-enet (third resource is GFEMR)
+- fsl,qe-enet
+
+Example:
+
+	ethernet@11300 {
+		compatible = "fsl,mpc8272-fcc-enet",
+			     "fsl,cpm2-fcc-enet";
+		reg = <11300 20 8400 100 11390 1>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		interrupts = <20 8>;
+		interrupt-parent = <&PIC>;
+		phy-handle = <&PHY0>;
+		fsl,cpm-command = <12000300>;
+	};
+
+* MDIO
+
+Currently defined compatibles:
+fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
+fsl,cpm2-mdio-bitbang (reg is port C registers)
+
+Properties for fsl,cpm2-mdio-bitbang:
+fsl,mdio-pin : pin of port C controlling mdio data
+fsl,mdc-pin : pin of port C controlling mdio clock
+
+Example:
+	mdio@10d40 {
+		compatible = "fsl,mpc8272ads-mdio-bitbang",
+			     "fsl,mpc8272-mdio-bitbang",
+			     "fsl,cpm2-mdio-bitbang";
+		reg = <10d40 14>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fsl,mdio-pin = <12>;
+		fsl,mdc-pin = <13>;
+	};
+
+* HDLC
+
+Currently defined compatibles:
+- fsl,ucc-hdlc
+
+Properties for fsl,ucc-hdlc:
+- rx-clock-name
+- tx-clock-name
+	Usage: required
+	Value type: <string>
+	Definition : Must be "brg1"-"brg16" for internal clock source,
+		     Must be "clk1"-"clk24" for external clock source.
+
+- fsl,tdm-interface
+	Usage: optional
+	Value type: <empty>
+	Definition : Specify that hdlc is based on tdm-interface
+
+The property below is dependent on fsl,tdm-interface:
+- fsl,rx-sync-clock
+	Usage: required
+	Value type: <string>
+	Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tx-sync-clock
+	Usage: required
+	Value type: <string>
+	Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tdm-framer-type
+	Usage: required for tdm interface
+	Value type: <string>
+	Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
+		     are not supported.
+
+- fsl,tdm-id
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : number of TDM ID
+
+- fsl,tx-timeslot-mask
+- fsl,rx-timeslot-mask
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : time slot mask for TDM operation. Indicates which time
+		     slots used for transmitting and receiving.
+
+- fsl,siram-entry-id
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : Must be 0,2,4...64. the number of TDM entry.
+
+- fsl,tdm-internal-loopback
+	usage: optional for tdm interface
+	value type: <empty>
+	Definition : Internal loopback connecting on TDM layer.
+
+Example for tdm interface:
+
+	ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "clk8";
+		tx-clock-name = "clk9";
+		fsl,rx-sync-clock = "rsync_pin";
+		fsl,tx-sync-clock = "tsync_pin";
+		fsl,tx-timeslot-mask = <0xfffffffe>;
+		fsl,rx-timeslot-mask = <0xfffffffe>;
+		fsl,tdm-framer-type = "e1";
+		fsl,tdm-id = <0>;
+		fsl,siram-entry-id = <0>;
+		fsl,tdm-interface;
+	};
+
+Example for hdlc without tdm interface:
+
+	ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "brg1";
+		tx-clock-name = "brg1";
+	};

Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt → Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt

@@ -69,6 +69,58 @@ Example:
 	};
      };
 
+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+- interrupt-controller : this device is a interrupt controller.
+
+Example:
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>;
+	};
+
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
+  "fsl,t1040-qe-si".
+- reg : Address range of SI register set.
+
+Example:
+
+	si1: si@700 {
+		compatible = "fsl,t1040-qe-si";
+		reg = <0x700 0x80>;
+	};
+
+* Serial Interface Block RAM(SIRAM)
+
+store the routing entries of SI
+
+Required properties:
+- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
+  "fsl,t1040-qe-siram".
+- reg : Address range of SI RAM.
+
+Example:
+
+	siram1: siram@1000 {
+		compatible = "fsl,t1040-qe-siram";
+		reg = <0x1000 0x800>;
+	};
+
 * QE Firmware Node
 
 This node defines a firmware binary that is embedded in the device tree, for

Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt

@@ -0,0 +1,17 @@
+* Serial
+
+Required Properties:
+compatible : must be "fsl,<chip>-ucc-uart". For t1040, must be
+"fsl,t1040-ucc-uart".
+port-number : port number of UCC-UART
+tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
+		   should be "clk1"-"clk28" for external clock source.
+
+Example:
+
+	ucc_serial: ucc@2200 {
+		compatible = "fsl,t1040-ucc-uart";
+		port-number = <0>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+	};

Documentation/kernel-parameters.txt

@@ -931,9 +931,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
 
+	disable_1tb_segments [PPC]
+			Disables the use of 1TB hash page table segments. This
+			causes the kernel to fall back to 256MB segments which
+			can be useful when debugging issues that require an SLB
+			miss to occur.
+
 	disable=	[IPV6]
 			See Documentation/networking/ipv6.txt.
 
+	disable_radix	[PPC]
+			Disable RADIX MMU mode on POWER9
+
 	disable_cpu_apicid= [X86,APIC,SMP]
 			Format: <int>
 			The number of initial APIC ID for the

MAINTAINERS

@@ -6948,6 +6948,7 @@ F:	drivers/crypto/nx/
 F:	drivers/crypto/vmx/
 F:	drivers/net/ethernet/ibm/ibmveth.*
 F:	drivers/net/ethernet/ibm/ibmvnic.*
+F:	drivers/pci/hotplug/pnv_php.c
 F:	drivers/pci/hotplug/rpa*
 F:	drivers/scsi/ibmvscsi/
 N:	opal
@@ -9214,6 +9215,12 @@ F:	drivers/firmware/psci.c
 F:	include/linux/psci.h
 F:	include/uapi/linux/psci.h
 
+POWERNV OPERATOR PANEL LCD DISPLAY DRIVER
+M:	Suraj Jitindar Singh <sjitindarsingh@gmail.com>
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Maintained
+F:	drivers/char/powernv-op-panel.c
+
 PNP SUPPORT
 M:	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
 S:	Maintained

arch/powerpc/Kconfig

@@ -127,7 +127,8 @@ config PPC
 	select IRQ_FORCED_THREADING
 	select HAVE_RCU_TABLE_FREE if SMP
 	select HAVE_SYSCALL_TRACEPOINTS
-	select HAVE_CBPF_JIT if CPU_BIG_ENDIAN
+	select HAVE_CBPF_JIT if !PPC64
+	select HAVE_EBPF_JIT if PPC64
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_HAS_GCOV_PROFILE_ALL
@@ -163,6 +164,8 @@ config PPC
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
 	select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
+	select GENERIC_CPU_AUTOPROBE
+	select HAVE_VIRT_CPU_ACCOUNTING
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
@@ -456,6 +459,29 @@ config KEXEC
 	  interface is strongly in flux, so no good recommendation can be
 	  made.
 
+config RELOCATABLE
+	bool "Build a relocatable kernel"
+	depends on (PPC64 && !COMPILE_TEST) || (FLATMEM && (44x || FSL_BOOKE))
+	select NONSTATIC_KERNEL
+	help
+	  This builds a kernel image that is capable of running at the
+	  location the kernel is loaded at. For ppc32, there is no any
+	  alignment restrictions, and this feature is a superset of
+	  DYNAMIC_MEMSTART and hence overrides it. For ppc64, we should use
+	  16k-aligned base address. The kernel is linked as a
+	  position-independent executable (PIE) and contains dynamic relocations
+	  which are processed early in the bootup process.
+
+	  One use is for the kexec on panic case where the recovery kernel
+	  must live at a different physical address than the primary
+	  kernel.
+
+	  Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
+	  it has been loaded at and the compile time physical addresses
+	  CONFIG_PHYSICAL_START is ignored.  However CONFIG_PHYSICAL_START
+	  setting can still be useful to bootwrappers that need to know the
+	  load address of the kernel (eg. u-boot/mkimage).
+
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
 	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
@@ -948,29 +974,6 @@ config DYNAMIC_MEMSTART
 
 	  This option is overridden by CONFIG_RELOCATABLE
 
-config RELOCATABLE
-	bool "Build a relocatable kernel"
-	depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE)
-	select NONSTATIC_KERNEL
-	help
-	  This builds a kernel image that is capable of running at the
-	  location the kernel is loaded at, without any alignment restrictions.
-	  This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
-
-	  One use is for the kexec on panic case where the recovery kernel
-	  must live at a different physical address than the primary
-	  kernel.
-
-	  Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
-	  it has been loaded at and the compile time physical addresses
-	  CONFIG_PHYSICAL_START is ignored.  However CONFIG_PHYSICAL_START
-	  setting can still be useful to bootwrappers that need to know the
-	  load address of the kernel (eg. u-boot/mkimage).
-
-config RELOCATABLE_PPC32
-	def_bool y
-	depends on PPC32 && RELOCATABLE
-
 config PAGE_OFFSET_BOOL
 	bool "Set custom page offset address"
 	depends on ADVANCED_OPTIONS
@@ -1053,24 +1056,14 @@ config CONSISTENT_SIZE
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx
+
+config PIN_TLB_IMMR
+	bool "Pinned TLB for IMMR"
+	depends on PIN_TLB
+	default y
 endmenu
 
 if PPC64
-config RELOCATABLE
-	bool "Build a relocatable kernel"
-	depends on !COMPILE_TEST
-	select NONSTATIC_KERNEL
-	help
-	  This builds a kernel image that is capable of running anywhere
-	  in the RMA (real memory area) at any 16k-aligned base address.
-	  The kernel is linked as a position-independent executable (PIE)
-	  and contains dynamic relocations which are processed early
-	  in the bootup process.
-
-	  One use is for the kexec on panic case where the recovery kernel
-	  must live at a different physical address than the primary
-	  kernel.
-
 # This value must have zeroes in the bottom 60 bits otherwise lots will break
 config PAGE_OFFSET
 	hex

arch/powerpc/Kconfig.debug

@@ -149,14 +149,14 @@ config PPC_EARLY_DEBUG_BOOTX
 
 config PPC_EARLY_DEBUG_LPAR
 	bool "LPAR HV Console"
-	depends on PPC_PSERIES
+	depends on PPC_PSERIES && HVC_CONSOLE
 	help
 	  Select this to enable early debugging for a machine with a HVC
 	  console on vterm 0.
 
 config PPC_EARLY_DEBUG_LPAR_HVSI
 	bool "LPAR HVSI Console"
-	depends on PPC_PSERIES
+	depends on PPC_PSERIES && HVC_CONSOLE
 	help
 	  Select this to enable early debugging for a machine with a HVSI
 	  console on a specified vterm.
@@ -212,7 +212,6 @@ config PPC_EARLY_DEBUG_40x
 config PPC_EARLY_DEBUG_CPM
 	bool "Early serial debugging for Freescale CPM-based serial ports"
 	depends on SERIAL_CPM
-	select PIN_TLB if PPC_8xx
 	help
 	  Select this to enable early debugging for Freescale chips
 	  using a CPM-based serial port.  This assumes that the bootwrapper

arch/powerpc/Makefile

@@ -181,6 +181,11 @@ KBUILD_CFLAGS	+= -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
 
 CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
+ifdef CONFIG_CPU_BIG_ENDIAN
+CHECKFLAGS	+= -D__BIG_ENDIAN__
+else
+CHECKFLAGS	+= -D__LITTLE_ENDIAN__
+endif
 
 KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
 
@@ -221,7 +226,7 @@ KBUILD_CFLAGS		+= -mno-sched-epilog
 endif
 
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
-cpu-as-$(CONFIG_ALTIVEC)	+= -Wa,-maltivec
+cpu-as-$(CONFIG_ALTIVEC)	+= $(call as-option,-Wa$(comma)-maltivec)
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 
 KBUILD_AFLAGS += $(cpu-as-y)

arch/powerpc/boot/Makefile

@@ -70,7 +70,7 @@ $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 libfdtheader := fdt.h libfdt.h libfdt_internal.h
 
-$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o): \
 	$(addprefix $(obj)/,$(libfdtheader))
 
 src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
@@ -78,7 +78,7 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
 		gunzip_util.c elf_util.c $(zlib) devtree.c stdlib.c \
 		oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
-		uartlite.c mpc52xx-psc.c
+		uartlite.c mpc52xx-psc.c opal.c opal-calls.S
 src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
 src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
 src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
@@ -113,6 +113,7 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
 src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
 src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
 src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
 
 src-wlib := $(sort $(src-wlib-y))
 src-plat := $(sort $(src-plat-y))
@@ -296,6 +297,9 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
 image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 
+# Board ports in arch/powerpc/platform/86xx/Kconfig
+image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
+
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2

arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi

@@ -51,6 +51,7 @@
 		serial2 = &serial2;
 		serial3 = &serial3;
 		pci0 = &pci0;
+		usb0 = &usb0;
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;

arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi

@@ -51,6 +51,7 @@
 		serial2 = &serial2;
 		serial3 = &serial3;
 		pci0 = &pci0;
+		usb0 = &usb0;
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;

arch/powerpc/boot/dts/fsl/kmcoge4.dts

@@ -106,6 +106,43 @@
 		sata@221000 {
 			status = "disabled";
 		};
+
+		fman0: fman@400000 {
+			enet0: ethernet@e0000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			mdio0: mdio@e1120 {
+				front_phy: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+			};
+
+			enet1: ethernet@e2000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			enet2: ethernet@e4000 {
+				status = "disabled";
+			};
+
+			enet3: ethernet@e6000 {
+				status = "disabled";
+			};
+			enet4: ethernet@e8000 {
+				phy-handle = <&front_phy>;
+				phy-connection-type = "rgmii";
+			};
+			enet5: ethernet@f0000 {
+				status = "disabled";
+			};
+		};
 	};
 
 	rio: rapidio@ffe0c0000 {

arch/powerpc/boot/dts/fsl/mvme7100.dts

@@ -0,0 +1,153 @@
+/*
+ * Device tree source for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "MVME7100";
+	compatible = "artesyn,MVME7100";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	soc: soc@f1000000 {
+		ranges = <0x00000000 0xf1000000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "dallas,max6649";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				status = "disabled";
+			};
+		};
+
+
+		enet0: ethernet@24000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy2: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy3: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		enet1: ethernet@25000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+	};
+
+	lbc: localbus@f1005000 {
+		reg = <0xf1005000 0x1000>;
+
+		ranges = <0 0 0xf8000000 0x08000000	// NOR Flash (128MB)
+			  2 0 0xf2030000 0x00010000	// NAND Flash (8GB)
+			  3 0 0xf2400000 0x00080000	// MRAM (512KB)
+			  4 0 0xf2000000 0x00010000	// BCSR
+			  5 0 0xf2010000 0x00010000>;	// QUART
+
+		bcsr@4,0 {
+			compatible = "artesyn,mvme7100-bcsr";
+			reg = <4 0 0x10000>;
+		};
+
+		serial@5,1000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x1000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,2000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x2000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,3000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x3000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,4000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x4000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+	};
+
+	pci0: pcie@f1008000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@f1009000 {
+		status = "disabled";
+	};
+
+	chosen {
+		linux,stdout-path = &serial0;
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"

arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi

@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-usb@210000 {
+usb0: usb@210000 {
 	compatible = "fsl-usb2-dr";
 	reg = <0x210000 0x1000>;
 	#address-cells = <1>;

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -607,7 +607,7 @@
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
-			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+			compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
 			fsl,iommu-parent = <&pamu0>;
 			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
 			phy_type = "utmi";
@@ -615,7 +615,7 @@
 		};
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
-			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			fsl,iommu-parent = <&pamu0>;
 			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
 			dr_mode = "host";
@@ -673,3 +673,48 @@
 		};
 	};
 };
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	fsl,qe-num-riscs = <1>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+			"fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi

@@ -212,4 +212,42 @@
 				  0 0x00010000>;
 		};
 	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
 };

arch/powerpc/boot/dts/fsl/t104xqds.dtsi

@@ -366,4 +366,42 @@
 				  0 0x00010000>;
 		};
 	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
 };

arch/powerpc/boot/dts/fsl/t104xrdb.dtsi

@@ -222,4 +222,42 @@
 				  0 0x00010000>;
 		};
 	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
 };

arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi

@@ -56,6 +56,8 @@
 		pci1 = &pci1;
 		pci2 = &pci2;
 		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
 		dma0 = &dma0;
 		dma1 = &dma1;
 		dma2 = &dma2;

arch/powerpc/boot/motload-head.S

@@ -0,0 +1,11 @@
+#include "ppc_asm.h"
+
+	.text
+	.globl _zimage_start
+_zimage_start:
+	mfmsr   r10
+	rlwinm  r10,r10,0,~(1<<15)        /* Clear MSR_EE */
+	sync
+	mtmsr   r10
+	isync
+	b	_zimage_start_lib

arch/powerpc/boot/mvme7100.c

@@ -0,0 +1,59 @@
+/*
+ * Motload compatibility for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+
+#define TARGET_86xx
+#define TARGET_HAS_ETH1
+#define TARGET_HAS_ETH2
+#define TARGET_HAS_ETH3
+#include "ppcboot.h"
+
+static bd_t bd;
+
+BSS_STACK(16384);
+
+static void mvme7100_fixups(void)
+{
+	void *devp;
+	unsigned long busfreq = bd.bi_busfreq * 1000000;
+
+	dt_fixup_cpu_clocks(bd.bi_intfreq * 1000000, busfreq / 4, busfreq);
+
+	devp = finddevice("/soc@f1000000");
+	if (devp)
+		setprop(devp, "bus-frequency", &busfreq, sizeof(busfreq));
+
+	devp = finddevice("/soc/serial@4500");
+	if (devp)
+		setprop(devp, "clock-frequency", &busfreq, sizeof(busfreq));
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
+	dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	fdt_init(_dtb_start);
+	serial_console_init();
+	platform_ops.fixups = mvme7100_fixups;
+}

arch/powerpc/boot/opal-calls.S

@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2016 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "ppc_asm.h"
+#include "../include/asm/opal-api.h"
+
+	.text
+
+#define OPAL_CALL(name, token)				\
+	.globl name;					\
+name:							\
+	li	r0, token;				\
+	b	opal_call;
+
+opal_call:
+	mflr	r11
+	std	r11,16(r1)
+	mfcr	r12
+	stw	r12,8(r1)
+	mr	r13,r2
+
+	/* Set opal return address */
+	ld	r11,opal_return@got(r2)
+	mtlr	r11
+	mfmsr	r12
+
+	/* switch to BE when we enter OPAL */
+	li	r11,MSR_LE
+	andc	r12,r12,r11
+	mtspr	SPRN_HSRR1,r12
+
+	/* load the opal call entry point and base */
+	ld	r11,opal@got(r2)
+	ld	r12,8(r11)
+	ld	r2,0(r11)
+	mtspr	SPRN_HSRR0,r12
+	hrfid
+
+opal_return:
+	FIXUP_ENDIAN
+	mr	r2,r13;
+	lwz	r11,8(r1);
+	ld	r12,16(r1)
+	mtcr	r11;
+	mtlr	r12
+	blr
+
+OPAL_CALL(opal_console_write,			OPAL_CONSOLE_WRITE);
+OPAL_CALL(opal_console_read,			OPAL_CONSOLE_READ);
+OPAL_CALL(opal_console_write_buffer_space,	OPAL_CONSOLE_WRITE_BUFFER_SPACE);
+OPAL_CALL(opal_poll_events,			OPAL_POLL_EVENTS);
+OPAL_CALL(opal_console_flush,			OPAL_CONSOLE_FLUSH);

arch/powerpc/boot/opal.c

@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2016 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "io.h"
+#include <libfdt.h>
+#include "../include/asm/opal-api.h"
+
+#ifdef __powerpc64__
+
+/* Global OPAL struct used by opal-call.S */
+struct opal {
+	u64 base;
+	u64 entry;
+} opal;
+
+static u32 opal_con_id;
+
+int64_t opal_console_write(int64_t term_number, u64 *length, const u8 *buffer);
+int64_t opal_console_read(int64_t term_number, uint64_t *length, u8 *buffer);
+int64_t opal_console_write_buffer_space(uint64_t term_number, uint64_t *length);
+int64_t opal_console_flush(uint64_t term_number);
+int64_t opal_poll_events(uint64_t *outstanding_event_mask);
+
+static int opal_con_open(void)
+{
+	return 0;
+}
+
+static void opal_con_putc(unsigned char c)
+{
+	int64_t rc;
+	uint64_t olen, len;
+
+	do {
+		rc = opal_console_write_buffer_space(opal_con_id, &olen);
+		len = be64_to_cpu(olen);
+		if (rc)
+			return;
+		opal_poll_events(NULL);
+	} while (len < 1);
+
+
+	olen = cpu_to_be64(1);
+	opal_console_write(opal_con_id, &olen, &c);
+}
+
+static void opal_con_close(void)
+{
+	opal_console_flush(opal_con_id);
+}
+
+static void opal_init(void)
+{
+	void *opal_node;
+
+	opal_node = finddevice("/ibm,opal");
+	if (!opal_node)
+		return;
+	if (getprop(opal_node, "opal-base-address", &opal.base, sizeof(u64)) < 0)
+		return;
+	opal.base = be64_to_cpu(opal.base);
+	if (getprop(opal_node, "opal-entry-address", &opal.entry, sizeof(u64)) < 0)
+		return;
+	opal.entry = be64_to_cpu(opal.entry);
+}
+
+int opal_console_init(void *devp, struct serial_console_data *scdp)
+{
+	opal_init();
+
+	if (devp) {
+		int n = getprop(devp, "reg", &opal_con_id, sizeof(u32));
+		if (n != sizeof(u32))
+			return -1;
+		opal_con_id = be32_to_cpu(opal_con_id);
+	} else
+		opal_con_id = 0;
+
+	scdp->open = opal_con_open;
+	scdp->putc = opal_con_putc;
+	scdp->close = opal_con_close;
+
+	return 0;
+}
+#else
+int opal_console_init(void *devp, struct serial_console_data *scdp)
+{
+	return -1;
+}
+#endif /* __powerpc64__ */

arch/powerpc/boot/ops.h

@@ -89,6 +89,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp);
 int cpm_console_init(void *devp, struct serial_console_data *scdp);
 int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp);
 int uartlite_console_init(void *devp, struct serial_console_data *scdp);
+int opal_console_init(void *devp, struct serial_console_data *scdp);
 void *simple_alloc_init(char *base, unsigned long heap_size,
 			unsigned long granularity, unsigned long max_allocs);
 extern void flush_cache(void *, unsigned long);

arch/powerpc/boot/ppc_asm.h

@@ -61,6 +61,10 @@
 
 #define SPRN_TBRL	268
 #define SPRN_TBRU	269
+#define SPRN_HSRR0	0x13A	/* Hypervisor Save/Restore 0 */
+#define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
+
+#define MSR_LE		0x0000000000000001
 
 #define FIXUP_ENDIAN						   \
 	tdi   0, 0, 0x48; /* Reverse endian of b . + 8		*/ \

arch/powerpc/boot/ppcboot.h

@@ -43,7 +43,7 @@ typedef struct bd_info {
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
 #if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
-	defined(TARGET_83xx)
+	defined(TARGET_83xx) || defined(TARGET_86xx)
 	unsigned long	bi_immr_base;	/* base of IMMR register */
 #endif
 #if defined(TARGET_PPC_MPC52xx)

arch/powerpc/boot/serial.c

@@ -132,6 +132,8 @@ int serial_console_init(void)
 	else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
 		 dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
 		rc = uartlite_console_init(devp, &serial_cd);
+	else if (dt_is_compatible(devp, "ibm,opal-console-raw"))
+		rc = opal_console_init(devp, &serial_cd);
 
 	/* Add other serial console driver calls here */
 

arch/powerpc/boot/types.h

@@ -12,6 +12,16 @@ typedef short			s16;
 typedef int			s32;
 typedef long long		s64;
 
+/* required for opal-api.h */
+typedef u8  uint8_t;
+typedef u16 uint16_t;
+typedef u32 uint32_t;
+typedef u64 uint64_t;
+typedef s8  int8_t;
+typedef s16 int16_t;
+typedef s32 int32_t;
+typedef s64 int64_t;
+
 #define min(x,y) ({ \
 	typeof(x) _x = (x);	\
 	typeof(y) _y = (y);	\

arch/powerpc/boot/wrapper

@@ -302,6 +302,11 @@ mvme5100)
     platformo="$object/fixed-head.o $object/mvme5100.o"
     binary=y
     ;;
+mvme7100)
+    platformo="$object/motload-head.o $object/mvme7100.o"
+    link_address='0x4000000'
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"

arch/powerpc/configs/40x/acadia_defconfig

@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/40x/ep405_defconfig

@@ -20,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/40x/kilauea_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/40x/klondike_defconfig

@@ -32,8 +32,6 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -44,7 +42,6 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_AVERAGE=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set

arch/powerpc/configs/40x/makalu_defconfig

@@ -20,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/40x/obs600_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/40x/virtex_defconfig

@@ -27,7 +27,6 @@ CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_FILTER=m

arch/powerpc/configs/40x/walnut_defconfig

@@ -18,7 +18,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/akebono_defconfig

@@ -32,7 +32,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
@@ -110,10 +109,9 @@ CONFIG_MMC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_VFAT_FS=y

arch/powerpc/configs/44x/arches_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/bamboo_defconfig

@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/bluestone_defconfig

@@ -49,7 +49,7 @@ CONFIG_SENSORS_AD7414=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y

arch/powerpc/configs/44x/canyonlands_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/currituck_defconfig

@@ -30,7 +30,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
@@ -71,10 +70,9 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y

arch/powerpc/configs/44x/ebony_defconfig

@@ -19,7 +19,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/eiger_defconfig

@@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
@@ -43,7 +42,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SAS=y
-CONFIG_I2O=y
 CONFIG_NETDEVICES=y
 CONFIG_IBM_EMAC=y
 CONFIG_IBM_EMAC_RXB=256

arch/powerpc/configs/44x/icon_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
@@ -76,8 +75,7 @@ CONFIG_LOGO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y

arch/powerpc/configs/44x/iss476-smp_defconfig

@@ -32,7 +32,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
@@ -56,10 +55,9 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_THERMAL=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y

arch/powerpc/configs/44x/katmai_defconfig

@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/rainier_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/redwood_defconfig

@@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
@@ -41,7 +40,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SAS=y
-CONFIG_I2O=y
 CONFIG_NETDEVICES=y
 CONFIG_IBM_EMAC=y
 CONFIG_IBM_EMAC_RXB=256

arch/powerpc/configs/44x/sam440ep_defconfig

@@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
@@ -85,9 +84,8 @@ CONFIG_RTC_DRV_M41T80_WDT=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=y

arch/powerpc/configs/44x/sequoia_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/taishan_defconfig

@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y

arch/powerpc/configs/44x/virtex5_defconfig

@@ -26,7 +26,6 @@ CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_FILTER=m

arch/powerpc/configs/44x/warp_defconfig

@@ -23,7 +23,6 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_VLAN_8021Q=y
@@ -73,9 +72,7 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/52xx/cm5200_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -61,8 +60,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_DMADEVICES=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/52xx/lite5200b_defconfig

@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -53,8 +52,7 @@ CONFIG_I2C_MPC=y
 CONFIG_DMADEVICES=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/52xx/motionpro_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -73,8 +72,7 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_DMADEVICES=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/52xx/pcm030_defconfig

@@ -34,7 +34,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -74,8 +73,7 @@ CONFIG_RTC_DRV_PCF8563=m
 CONFIG_DMADEVICES=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=m
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850

arch/powerpc/configs/52xx/tqm5200_defconfig

@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -75,8 +74,7 @@ CONFIG_RTC_DRV_DS1374=y
 CONFIG_DMADEVICES=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/83xx/asp8347_defconfig

@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -63,8 +62,7 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/powerpc/configs/83xx/kmeter1_defconfig

@@ -28,7 +28,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_TIPC=y
 CONFIG_BRIDGE=m

arch/powerpc/configs/83xx/mpc8313_rdb_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -79,8 +78,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/powerpc/configs/83xx/mpc8315_rdb_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -77,8 +76,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/powerpc/configs/83xx/mpc832x_mds_defconfig

@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -52,8 +51,7 @@ CONFIG_WATCHDOG=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/83xx/mpc832x_rdb_defconfig

@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -64,8 +63,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SPI=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/83xx/mpc834x_itx_defconfig

@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -75,8 +74,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig

@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -66,8 +65,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/83xx/mpc834x_mds_defconfig

@@ -25,7 +25,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -51,8 +50,7 @@ CONFIG_WATCHDOG=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/83xx/mpc836x_mds_defconfig

@@ -25,7 +25,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -57,8 +56,7 @@ CONFIG_WATCHDOG=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/83xx/mpc836x_rdk_defconfig

@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
@@ -65,8 +64,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/powerpc/configs/83xx/mpc837x_mds_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -50,8 +49,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_WATCHDOG=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/83xx/mpc837x_rdb_defconfig

@@ -24,7 +24,6 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -77,8 +76,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/83xx/sbc834x_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -65,9 +64,7 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_STORAGE=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/85xx/ge_imp3a_defconfig

@@ -165,10 +165,8 @@ CONFIG_FSL_DMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FUSE_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y

arch/powerpc/configs/85xx/kmp204x_defconfig

@@ -64,7 +64,6 @@ CONFIG_IP_PIMSM_V2=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-# CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_TIPC=y
@@ -189,7 +188,7 @@ CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_UIO=y
 CONFIG_STAGING=y
-CONFIG_CLK_PPC_CORENET=y
+CONFIG_CLK_QORIQ=y
 CONFIG_EXT2_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y

arch/powerpc/configs/85xx/ksi8560_defconfig

@@ -21,7 +21,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -49,8 +48,7 @@ CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_GEN_RTC=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/85xx/mpc8540_ads_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -41,8 +40,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/85xx/mpc8560_ads_defconfig

@@ -21,7 +21,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -44,8 +43,7 @@ CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_GEN_RTC=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/85xx/mpc85xx_cds_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -46,8 +45,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y

arch/powerpc/configs/85xx/sbc8548_defconfig

@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set

arch/powerpc/configs/85xx/socrates_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=y
 CONFIG_MTD=y
@@ -79,8 +78,7 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/powerpc/configs/85xx/stx_gp3_defconfig

@@ -17,7 +17,6 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_IP_NF_IPTABLES=m
@@ -53,8 +52,7 @@ CONFIG_AGP=m
 CONFIG_DRM=m
 CONFIG_SOUND=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_UDF_FS=m

arch/powerpc/configs/85xx/tqm8540_defconfig

@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -50,8 +49,7 @@ CONFIG_I2C_MPC=y
 CONFIG_HWMON_DEBUG_CHIP=y
 CONFIG_SENSORS_LM75=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/powerpc/configs/85xx/tqm8541_defconfig

@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -52,8 +51,7 @@ CONFIG_I2C_MPC=y
 CONFIG_HWMON_DEBUG_CHIP=y
 CONFIG_SENSORS_LM75=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y