rtlwifi: btcoexist: Implement antenna selection

The previous patch added an option to rtl8723be to manually select the
antenna for those cases when only a single antenna is present, and the
on-board EEPROM is incorrectly programmed. This patch implements the
necessary changes in the Bluetooth coexistence driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V4.0+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c

@@ -1203,7 +1203,6 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
 
 		/* Force GNT_BT to low */
 		btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0);
-		btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
 
 		if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) {
 			/* tell firmware "no antenna inverse" */
@@ -1211,19 +1210,25 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
 			h2c_parameter[1] = 1;  /* ext switch type */
 			btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
 						h2c_parameter);
+			btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
 		} else {
 			/* tell firmware "antenna inverse" */
 			h2c_parameter[0] = 1;
 			h2c_parameter[1] = 1;  /* ext switch type */
 			btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
 						h2c_parameter);
+			btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
 		}
 	}
 
 	/* ext switch setting */
 	if (use_ext_switch) {
 		/* fixed internal switch S1->WiFi, S0->BT */
-		btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+		if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT)
+			btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+		else
+			btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
+
 		switch (antpos_type) {
 		case BTC_ANT_WIFI_AT_MAIN:
 			/* ext switch main at wifi */

drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c

@@ -965,13 +965,38 @@ void exhalbtc_set_chip_type(u8 chip_type)
 	}
 }
 
-void exhalbtc_set_ant_num(u8 type, u8 ant_num)
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num)
 {
 	if (BT_COEX_ANT_TYPE_PG == type) {
 		gl_bt_coexist.board_info.pg_ant_num = ant_num;
 		gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+		/* The antenna position:
+		 * Main (default) or Aux for pgAntNum=2 && btdmAntNum =1.
+		 * The antenna position should be determined by
+		 * auto-detect mechanism.
+		 * The following is assumed to main,
+		 * and those must be modified
+		 * if y auto-detect mechanism is ready
+		 */
+		if ((gl_bt_coexist.board_info.pg_ant_num == 2) &&
+		    (gl_bt_coexist.board_info.btdm_ant_num == 1))
+			gl_bt_coexist.board_info.btdm_ant_pos =
+						       BTC_ANTENNA_AT_MAIN_PORT;
+		else
+			gl_bt_coexist.board_info.btdm_ant_pos =
+						       BTC_ANTENNA_AT_MAIN_PORT;
 	} else if (BT_COEX_ANT_TYPE_ANTDIV == type) {
 		gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+		gl_bt_coexist.board_info.btdm_ant_pos =
+						       BTC_ANTENNA_AT_MAIN_PORT;
+	} else if (type == BT_COEX_ANT_TYPE_DETECTED) {
+		gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+		if (rtlpriv->cfg->mod_params->ant_sel == 1)
+			gl_bt_coexist.board_info.btdm_ant_pos =
+				BTC_ANTENNA_AT_AUX_PORT;
+		else
+			gl_bt_coexist.board_info.btdm_ant_pos =
+				BTC_ANTENNA_AT_MAIN_PORT;
 	}
 }
 

drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h

@@ -535,7 +535,7 @@ void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version);
 void exhalbtc_update_min_bt_rssi(char bt_rssi);
 void exhalbtc_set_bt_exist(bool bt_exist);
 void exhalbtc_set_chip_type(u8 chip_type);
-void exhalbtc_set_ant_num(u8 type, u8 ant_num);
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num);
 void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist);
 void exhalbtc_signal_compensation(struct btc_coexist *btcoexist,
 				  u8 *rssi_wifi, u8 *rssi_bt);

drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c

@@ -72,7 +72,10 @@ void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv)
 		 __func__, bt_type);
 	exhalbtc_set_chip_type(bt_type);
 
-	exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num);
+	if (rtlpriv->cfg->mod_params->ant_sel == 1)
+		exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_DETECTED, 1);
+	else
+		exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_PG, ant_num);
 }
 
 void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv)