Merge tag 'usb-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.12

With 51 non-merge commits, this is one of the smallest USB Gadget pull
requests. Apart from your expected set of non-critical fixes, and
other miscellaneous items, we have most of the changes in dwc3 (52.5%)
with all other UDCs following with 34.8%.

As for the actual changes, the most important of them are all the
recent changes to reduce memory footprint of dwc3, bare minimum
dual-role support on dwc3 and reworked endpoint count and
initialization routines.

Documentation/ABI/testing/sysfs-platform-renesas_usb3

@@ -0,0 +1,15 @@
+What:		/sys/devices/platform/<renesas_usb3's name>/role
+Date:		March 2017
+KernelVersion:	4.13
+Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Description:
+		This file can be read and write.
+		The file can show/change the drd mode of usb.
+
+		Write the following string to change the mode:
+		 "host" - switching mode from peripheral to host.
+		 "peripheral" - switching mode from host to peripheral.
+
+		Read the file, then it shows the following strings:
+		 "host" - The mode is host now.
+		 "peripheral" - The mode is peripheral now.

drivers/usb/common/usb-otg-fsm.c

@@ -31,6 +31,13 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/otg-fsm.h>
 
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s]  " fmt, \
+				 __func__, ## args)
+#else
+#define VDBG(stuff...)	do {} while (0)
+#endif
+
 /* Change USB protocol when there is a protocol change */
 static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
 {

drivers/usb/dwc2/core.h

@@ -423,6 +423,10 @@ enum dwc2_ep0_state {
  *			needed.
  *			0 - No (default)
  *			1 - Yes
+ * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO
+ *			register.
+ *			0 - Deactivate the transceiver (default)
+ *			1 - Activate the transceiver
  * @g_dma:              Enables gadget dma usage (default: autodetect).
  * @g_dma_desc:         Enables gadget descriptor DMA (default: autodetect).
  * @g_rx_fifo_size:	The periodic rx fifo size for the device, in
@@ -477,6 +481,7 @@ struct dwc2_core_params {
 	bool uframe_sched;
 	bool external_id_pin_ctl;
 	bool hibernation;
+	bool activate_stm_fs_transceiver;
 	u16 max_packet_count;
 	u32 max_transfer_size;
 	u32 ahbcfg;

drivers/usb/dwc2/hcd.c

@@ -121,7 +121,7 @@ static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
 
 static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 {
-	u32 usbcfg, i2cctl;
+	u32 usbcfg, ggpio, i2cctl;
 	int retval = 0;
 
 	/*
@@ -145,6 +145,19 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 				return retval;
 			}
 		}
+
+		if (hsotg->params.activate_stm_fs_transceiver) {
+			ggpio = dwc2_readl(hsotg->regs + GGPIO);
+			if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
+				dev_dbg(hsotg->dev, "Activating transceiver\n");
+				/*
+				 * STM32F4x9 uses the GGPIO register as general
+				 * core configuration register.
+				 */
+				ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
+				dwc2_writel(ggpio, hsotg->regs + GGPIO);
+			}
+		}
 	}
 
 	/*
@@ -3264,6 +3277,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);

drivers/usb/dwc2/hw.h

@@ -225,6 +225,8 @@
 
 #define GPVNDCTL			HSOTG_REG(0x0034)
 #define GGPIO				HSOTG_REG(0x0038)
+#define GGPIO_STM32_OTG_GCCFG_PWRDWN	BIT(16)
+
 #define GUID				HSOTG_REG(0x003c)
 #define GSNPSID				HSOTG_REG(0x0040)
 #define GHWCFG1				HSOTG_REG(0x0044)

drivers/usb/dwc2/params.c

@@ -120,6 +120,22 @@ static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
 	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
 }
 
+static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->speed = DWC2_SPEED_PARAM_FULL;
+	p->host_rx_fifo_size = 128;
+	p->host_nperio_tx_fifo_size = 96;
+	p->host_perio_tx_fifo_size = 96;
+	p->max_packet_count = 256;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+	p->i2c_enable = false;
+	p->uframe_sched = false;
+	p->activate_stm_fs_transceiver = true;
+}
+
 const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
 	{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params  },
@@ -133,6 +149,9 @@ const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "amlogic,meson-gxbb-usb",
 	  .data = dwc2_set_amlogic_params },
 	{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
+	{ .compatible = "st,stm32f4x9-fsotg",
+	  .data = dwc2_set_stm32f4x9_fsotg_params },
+	{ .compatible = "st,stm32f4x9-hsotg" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);

drivers/usb/dwc2/platform.c

@@ -214,20 +214,11 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
 	if (IS_ERR(hsotg->reset)) {
 		ret = PTR_ERR(hsotg->reset);
-		switch (ret) {
-		case -ENOENT:
-		case -ENOTSUPP:
-			hsotg->reset = NULL;
-			break;
-		default:
-			dev_err(hsotg->dev, "error getting reset control %d\n",
-				ret);
-			return ret;
-		}
+		dev_err(hsotg->dev, "error getting reset control %d\n", ret);
+		return ret;
 	}
 
-	if (hsotg->reset)
-		reset_control_deassert(hsotg->reset);
+	reset_control_deassert(hsotg->reset);
 
 	/* Set default UTMI width */
 	hsotg->phyif = GUSBCFG_PHYIF16;
@@ -326,8 +317,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 	if (hsotg->ll_hw_enabled)
 		dwc2_lowlevel_hw_disable(hsotg);
 
-	if (hsotg->reset)
-		reset_control_assert(hsotg->reset);
+	reset_control_assert(hsotg->reset);
 
 	return 0;
 }

drivers/usb/dwc3/Kconfig

@@ -41,6 +41,7 @@ config USB_DWC3_GADGET
 config USB_DWC3_DUAL_ROLE
 	bool "Dual Role mode"
 	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
+	depends on (EXTCON=y || EXTCON=USB_DWC3)
 	help
 	  This is the default mode of working of DWC3 controller where
 	  both host and gadget features are enabled.

drivers/usb/dwc3/Makefile

@@ -17,6 +17,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
 	dwc3-y				+= gadget.o ep0.o
 endif
 
+ifneq ($(CONFIG_USB_DWC3_DUAL_ROLE),)
+	dwc3-y				+= drd.o
+endif
+
 ifneq ($(CONFIG_USB_DWC3_ULPI),)
 	dwc3-y				+= ulpi.o
 endif

drivers/usb/dwc3/core.c

@@ -100,7 +100,10 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
 	return 0;
 }
 
-void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+static void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
+static int dwc3_event_buffers_setup(struct dwc3 *dwc);
+
+static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 {
 	u32 reg;
 
@@ -110,6 +113,69 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 }
 
+static void __dwc3_set_mode(struct work_struct *work)
+{
+	struct dwc3 *dwc = work_to_dwc(work);
+	unsigned long flags;
+	int ret;
+
+	if (!dwc->desired_dr_role)
+		return;
+
+	if (dwc->desired_dr_role == dwc->current_dr_role)
+		return;
+
+	if (dwc->dr_mode != USB_DR_MODE_OTG)
+		return;
+
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		dwc3_host_exit(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_gadget_exit(dwc);
+		dwc3_event_buffers_cleanup(dwc);
+		break;
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	dwc3_set_prtcap(dwc, dwc->desired_dr_role);
+
+	dwc->current_dr_role = dwc->desired_dr_role;
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	switch (dwc->desired_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		ret = dwc3_host_init(dwc);
+		if (ret)
+			dev_err(dwc->dev, "failed to initialize host\n");
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_event_buffers_setup(dwc);
+		ret = dwc3_gadget_init(dwc);
+		if (ret)
+			dev_err(dwc->dev, "failed to initialize peripheral\n");
+		break;
+	default:
+		break;
+	}
+}
+
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->desired_dr_role = mode;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	queue_work(system_power_efficient_wq, &dwc->drd_work);
+}
+
 u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)
 {
 	struct dwc3		*dwc = dep->dwc;
@@ -397,8 +463,7 @@ static void dwc3_core_num_eps(struct dwc3 *dwc)
 {
 	struct dwc3_hwparams	*parms = &dwc->hwparams;
 
-	dwc->num_in_eps = DWC3_NUM_IN_EPS(parms);
-	dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps;
+	dwc->num_eps = DWC3_NUM_EPS(parms);
 }
 
 static void dwc3_cache_hwparams(struct dwc3 *dwc)
@@ -431,6 +496,12 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
+	/*
+	 * Make sure UX_EXIT_PX is cleared as that causes issues with some
+	 * PHYs. Also, this bit is not supposed to be used in normal operation.
+	 */
+	reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
+
 	/*
 	 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
 	 * to '0' during coreConsultant configuration. So default value
@@ -714,21 +785,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		goto err4;
 	}
 
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
-		break;
-	case USB_DR_MODE_HOST:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
-		break;
-	case USB_DR_MODE_OTG:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
-		break;
-	default:
-		dev_warn(dwc->dev, "Unsupported mode %d\n", dwc->dr_mode);
-		break;
-	}
-
 	/*
 	 * ENDXFER polling is available on version 3.10a and later of
 	 * the DWC_usb3 controller. It is NOT available in the
@@ -846,6 +902,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
@@ -854,6 +911,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_HOST:
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
@@ -862,17 +920,11 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_OTG:
-		ret = dwc3_host_init(dwc);
-		if (ret) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "failed to initialize host\n");
-			return ret;
-		}
-
-		ret = dwc3_gadget_init(dwc);
+		INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
+		ret = dwc3_drd_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "failed to initialize gadget\n");
+				dev_err(dev, "failed to initialize dual-role\n");
 			return ret;
 		}
 		break;
@@ -894,8 +946,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 		dwc3_host_exit(dwc);
 		break;
 	case USB_DR_MODE_OTG:
-		dwc3_host_exit(dwc);
-		dwc3_gadget_exit(dwc);
+		dwc3_drd_exit(dwc);
 		break;
 	default:
 		/* do nothing */

drivers/usb/dwc3/core.h

@@ -23,10 +23,12 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 #include <linux/list.h>
+#include <linux/bitops.h>
 #include <linux/dma-mapping.h>
 #include <linux/mm.h>
 #include <linux/debugfs.h>
 #include <linux/wait.h>
+#include <linux/workqueue.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -39,9 +41,8 @@
 
 /* Global constants */
 #define DWC3_PULL_UP_TIMEOUT	500	/* ms */
-#define DWC3_ZLP_BUF_SIZE	1024	/* size of a superspeed bulk */
 #define DWC3_BOUNCE_SIZE	1024	/* size of a superspeed bulk */
-#define DWC3_EP0_BOUNCE_SIZE	512
+#define DWC3_EP0_SETUP_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
 #define DWC3_XHCI_RESOURCES_NUM	2
 
@@ -66,7 +67,7 @@
 #define DWC3_DEVICE_EVENT_OVERFLOW		11
 
 #define DWC3_GEVNTCOUNT_MASK	0xfffc
-#define DWC3_GEVNTCOUNT_EHB	(1 << 31)
+#define DWC3_GEVNTCOUNT_EHB	BIT(31)
 #define DWC3_GSNPSID_MASK	0xffff0000
 #define DWC3_GSNPSREV_MASK	0xffff
 
@@ -116,20 +117,20 @@
 #define DWC3_VER_NUMBER		0xc1a0
 #define DWC3_VER_TYPE		0xc1a4
 
-#define DWC3_GUSB2PHYCFG(n)	(0xc200 + (n * 0x04))
-#define DWC3_GUSB2I2CCTL(n)	(0xc240 + (n * 0x04))
+#define DWC3_GUSB2PHYCFG(n)	(0xc200 + ((n) * 0x04))
+#define DWC3_GUSB2I2CCTL(n)	(0xc240 + ((n) * 0x04))
 
-#define DWC3_GUSB2PHYACC(n)	(0xc280 + (n * 0x04))
+#define DWC3_GUSB2PHYACC(n)	(0xc280 + ((n) * 0x04))
 
-#define DWC3_GUSB3PIPECTL(n)	(0xc2c0 + (n * 0x04))
+#define DWC3_GUSB3PIPECTL(n)	(0xc2c0 + ((n) * 0x04))
 
-#define DWC3_GTXFIFOSIZ(n)	(0xc300 + (n * 0x04))
-#define DWC3_GRXFIFOSIZ(n)	(0xc380 + (n * 0x04))
+#define DWC3_GTXFIFOSIZ(n)	(0xc300 + ((n) * 0x04))
+#define DWC3_GRXFIFOSIZ(n)	(0xc380 + ((n) * 0x04))
 
-#define DWC3_GEVNTADRLO(n)	(0xc400 + (n * 0x10))
-#define DWC3_GEVNTADRHI(n)	(0xc404 + (n * 0x10))
-#define DWC3_GEVNTSIZ(n)	(0xc408 + (n * 0x10))
-#define DWC3_GEVNTCOUNT(n)	(0xc40c + (n * 0x10))
+#define DWC3_GEVNTADRLO(n)	(0xc400 + ((n) * 0x10))
+#define DWC3_GEVNTADRHI(n)	(0xc404 + ((n) * 0x10))
+#define DWC3_GEVNTSIZ(n)	(0xc408 + ((n) * 0x10))
+#define DWC3_GEVNTCOUNT(n)	(0xc40c + ((n) * 0x10))
 
 #define DWC3_GHWPARAMS8		0xc600
 #define DWC3_GFLADJ		0xc630
@@ -143,13 +144,13 @@
 #define DWC3_DGCMD		0xc714
 #define DWC3_DALEPENA		0xc720
 
-#define DWC3_DEP_BASE(n)	(0xc800 + (n * 0x10))
+#define DWC3_DEP_BASE(n)	(0xc800 + ((n) * 0x10))
 #define DWC3_DEPCMDPAR2		0x00
 #define DWC3_DEPCMDPAR1		0x04
 #define DWC3_DEPCMDPAR0		0x08
 #define DWC3_DEPCMD		0x0c
 
-#define DWC3_DEV_IMOD(n)	(0xca00 + (n * 0x4))
+#define DWC3_DEV_IMOD(n)	(0xca00 + ((n) * 0x4))
 
 /* OTG Registers */
 #define DWC3_OCFG		0xcc00
@@ -176,11 +177,11 @@
 /* Global RX Threshold Configuration Register */
 #define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
 #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
-#define DWC3_GRXTHRCFG_PKTCNTSEL (1 << 29)
+#define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
 
 /* Global Configuration Register */
 #define DWC3_GCTL_PWRDNSCALE(n)	((n) << 19)
-#define DWC3_GCTL_U2RSTECN	(1 << 16)
+#define DWC3_GCTL_U2RSTECN	BIT(16)
 #define DWC3_GCTL_RAMCLKSEL(x)	(((x) & DWC3_GCTL_CLK_MASK) << 6)
 #define DWC3_GCTL_CLK_BUS	(0)
 #define DWC3_GCTL_CLK_PIPE	(1)
@@ -193,24 +194,24 @@
 #define DWC3_GCTL_PRTCAP_DEVICE	2
 #define DWC3_GCTL_PRTCAP_OTG	3
 
-#define DWC3_GCTL_CORESOFTRESET		(1 << 11)
-#define DWC3_GCTL_SOFITPSYNC		(1 << 10)
+#define DWC3_GCTL_CORESOFTRESET		BIT(11)
+#define DWC3_GCTL_SOFITPSYNC		BIT(10)
 #define DWC3_GCTL_SCALEDOWN(n)		((n) << 4)
 #define DWC3_GCTL_SCALEDOWN_MASK	DWC3_GCTL_SCALEDOWN(3)
-#define DWC3_GCTL_DISSCRAMBLE		(1 << 3)
-#define DWC3_GCTL_U2EXIT_LFPS		(1 << 2)
-#define DWC3_GCTL_GBLHIBERNATIONEN	(1 << 1)
-#define DWC3_GCTL_DSBLCLKGTNG		(1 << 0)
+#define DWC3_GCTL_DISSCRAMBLE		BIT(3)
+#define DWC3_GCTL_U2EXIT_LFPS		BIT(2)
+#define DWC3_GCTL_GBLHIBERNATIONEN	BIT(1)
+#define DWC3_GCTL_DSBLCLKGTNG		BIT(0)
 
 /* Global User Control 1 Register */
-#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	(1 << 24)
+#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	BIT(24)
 
 /* Global USB2 PHY Configuration Register */
-#define DWC3_GUSB2PHYCFG_PHYSOFTRST	(1 << 31)
-#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS	(1 << 30)
-#define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
-#define DWC3_GUSB2PHYCFG_ULPI_UTMI	(1 << 4)
-#define DWC3_GUSB2PHYCFG_ENBLSLPM	(1 << 8)
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST	BIT(31)
+#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS	BIT(30)
+#define DWC3_GUSB2PHYCFG_SUSPHY		BIT(6)
+#define DWC3_GUSB2PHYCFG_ULPI_UTMI	BIT(4)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM	BIT(8)
 #define DWC3_GUSB2PHYCFG_PHYIF(n)	(n << 3)
 #define DWC3_GUSB2PHYCFG_PHYIF_MASK	DWC3_GUSB2PHYCFG_PHYIF(1)
 #define DWC3_GUSB2PHYCFG_USBTRDTIM(n)	(n << 10)
@@ -221,25 +222,26 @@
 #define UTMI_PHYIF_8_BIT		0
 
 /* Global USB2 PHY Vendor Control Register */
-#define DWC3_GUSB2PHYACC_NEWREGREQ	(1 << 25)
-#define DWC3_GUSB2PHYACC_BUSY		(1 << 23)
-#define DWC3_GUSB2PHYACC_WRITE		(1 << 22)
+#define DWC3_GUSB2PHYACC_NEWREGREQ	BIT(25)
+#define DWC3_GUSB2PHYACC_BUSY		BIT(23)
+#define DWC3_GUSB2PHYACC_WRITE		BIT(22)
 #define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)
 #define DWC3_GUSB2PHYACC_EXTEND_ADDR(n)	(n << 8)
 #define DWC3_GUSB2PHYACC_DATA(n)	(n & 0xff)
 
 /* Global USB3 PIPE Control Register */
-#define DWC3_GUSB3PIPECTL_PHYSOFTRST	(1 << 31)
-#define DWC3_GUSB3PIPECTL_U2SSINP3OK	(1 << 29)
-#define DWC3_GUSB3PIPECTL_DISRXDETINP3	(1 << 28)
-#define DWC3_GUSB3PIPECTL_REQP1P2P3	(1 << 24)
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST	BIT(31)
+#define DWC3_GUSB3PIPECTL_U2SSINP3OK	BIT(29)
+#define DWC3_GUSB3PIPECTL_DISRXDETINP3	BIT(28)
+#define DWC3_GUSB3PIPECTL_UX_EXIT_PX	BIT(27)
+#define DWC3_GUSB3PIPECTL_REQP1P2P3	BIT(24)
 #define DWC3_GUSB3PIPECTL_DEP1P2P3(n)	((n) << 19)
 #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK	DWC3_GUSB3PIPECTL_DEP1P2P3(7)
 #define DWC3_GUSB3PIPECTL_DEP1P2P3_EN	DWC3_GUSB3PIPECTL_DEP1P2P3(1)
-#define DWC3_GUSB3PIPECTL_DEPOCHANGE	(1 << 18)
-#define DWC3_GUSB3PIPECTL_SUSPHY	(1 << 17)
-#define DWC3_GUSB3PIPECTL_LFPSFILT	(1 << 9)
-#define DWC3_GUSB3PIPECTL_RX_DETOPOLL	(1 << 8)
+#define DWC3_GUSB3PIPECTL_DEPOCHANGE	BIT(18)
+#define DWC3_GUSB3PIPECTL_SUSPHY	BIT(17)
+#define DWC3_GUSB3PIPECTL_LFPSFILT	BIT(9)
+#define DWC3_GUSB3PIPECTL_RX_DETOPOLL	BIT(8)
 #define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK	DWC3_GUSB3PIPECTL_TX_DEEPH(3)
 #define DWC3_GUSB3PIPECTL_TX_DEEPH(n)	((n) << 1)
 
@@ -248,7 +250,7 @@
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 
 /* Global Event Size Registers */
-#define DWC3_GEVNTSIZ_INTMASK		(1 << 31)
+#define DWC3_GEVNTSIZ_INTMASK		BIT(31)
 #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)
 
 /* Global HWPARAMS0 Register */
@@ -289,18 +291,18 @@
 #define DWC3_MAX_HIBER_SCRATCHBUFS		15
 
 /* Global HWPARAMS6 Register */
-#define DWC3_GHWPARAMS6_EN_FPGA			(1 << 7)
+#define DWC3_GHWPARAMS6_EN_FPGA			BIT(7)
 
 /* Global HWPARAMS7 Register */
 #define DWC3_GHWPARAMS7_RAM1_DEPTH(n)	((n) & 0xffff)
 #define DWC3_GHWPARAMS7_RAM2_DEPTH(n)	(((n) >> 16) & 0xffff)
 
 /* Global Frame Length Adjustment Register */
-#define DWC3_GFLADJ_30MHZ_SDBND_SEL		(1 << 7)
+#define DWC3_GFLADJ_30MHZ_SDBND_SEL		BIT(7)
 #define DWC3_GFLADJ_30MHZ_MASK			0x3f
 
 /* Global User Control Register 2 */
-#define DWC3_GUCTL2_RST_ACTBITLATER		(1 << 14)
+#define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 
 /* Device Configuration Register */
 #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
@@ -310,23 +312,23 @@
 #define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0)  /* DWC_usb31 only */
 #define DWC3_DCFG_SUPERSPEED	(4 << 0)
 #define DWC3_DCFG_HIGHSPEED	(0 << 0)
-#define DWC3_DCFG_FULLSPEED	(1 << 0)
+#define DWC3_DCFG_FULLSPEED	BIT(0)
 #define DWC3_DCFG_LOWSPEED	(2 << 0)
 
 #define DWC3_DCFG_NUMP_SHIFT	17
 #define DWC3_DCFG_NUMP(n)	(((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
 #define DWC3_DCFG_NUMP_MASK	(0x1f << DWC3_DCFG_NUMP_SHIFT)
-#define DWC3_DCFG_LPM_CAP	(1 << 22)
+#define DWC3_DCFG_LPM_CAP	BIT(22)
 
 /* Device Control Register */
-#define DWC3_DCTL_RUN_STOP	(1 << 31)
-#define DWC3_DCTL_CSFTRST	(1 << 30)
-#define DWC3_DCTL_LSFTRST	(1 << 29)
+#define DWC3_DCTL_RUN_STOP	BIT(31)
+#define DWC3_DCTL_CSFTRST	BIT(30)
+#define DWC3_DCTL_LSFTRST	BIT(29)
 
 #define DWC3_DCTL_HIRD_THRES_MASK	(0x1f << 24)
 #define DWC3_DCTL_HIRD_THRES(n)	((n) << 24)
 
-#define DWC3_DCTL_APPL1RES	(1 << 23)
+#define DWC3_DCTL_APPL1RES	BIT(23)
 
 /* These apply for core versions 1.87a and earlier */
 #define DWC3_DCTL_TRGTULST_MASK		(0x0f << 17)
@@ -341,15 +343,15 @@
 #define DWC3_DCTL_LPM_ERRATA_MASK	DWC3_DCTL_LPM_ERRATA(0xf)
 #define DWC3_DCTL_LPM_ERRATA(n)		((n) << 20)
 
-#define DWC3_DCTL_KEEP_CONNECT		(1 << 19)
-#define DWC3_DCTL_L1_HIBER_EN		(1 << 18)
-#define DWC3_DCTL_CRS			(1 << 17)
-#define DWC3_DCTL_CSS			(1 << 16)
+#define DWC3_DCTL_KEEP_CONNECT		BIT(19)
+#define DWC3_DCTL_L1_HIBER_EN		BIT(18)
+#define DWC3_DCTL_CRS			BIT(17)
+#define DWC3_DCTL_CSS			BIT(16)
 
-#define DWC3_DCTL_INITU2ENA		(1 << 12)
-#define DWC3_DCTL_ACCEPTU2ENA		(1 << 11)
-#define DWC3_DCTL_INITU1ENA		(1 << 10)
-#define DWC3_DCTL_ACCEPTU1ENA		(1 << 9)
+#define DWC3_DCTL_INITU2ENA		BIT(12)
+#define DWC3_DCTL_ACCEPTU2ENA		BIT(11)
+#define DWC3_DCTL_INITU1ENA		BIT(10)
+#define DWC3_DCTL_ACCEPTU1ENA		BIT(9)
 #define DWC3_DCTL_TSTCTRL_MASK		(0xf << 1)
 
 #define DWC3_DCTL_ULSTCHNGREQ_MASK	(0x0f << 5)
@@ -364,36 +366,36 @@
 #define DWC3_DCTL_ULSTCHNG_LOOPBACK	(DWC3_DCTL_ULSTCHNGREQ(11))
 
 /* Device Event Enable Register */
-#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN	(1 << 12)
-#define DWC3_DEVTEN_EVNTOVERFLOWEN	(1 << 11)
-#define DWC3_DEVTEN_CMDCMPLTEN		(1 << 10)
-#define DWC3_DEVTEN_ERRTICERREN		(1 << 9)
-#define DWC3_DEVTEN_SOFEN		(1 << 7)
-#define DWC3_DEVTEN_EOPFEN		(1 << 6)
-#define DWC3_DEVTEN_HIBERNATIONREQEVTEN	(1 << 5)
-#define DWC3_DEVTEN_WKUPEVTEN		(1 << 4)
-#define DWC3_DEVTEN_ULSTCNGEN		(1 << 3)
-#define DWC3_DEVTEN_CONNECTDONEEN	(1 << 2)
-#define DWC3_DEVTEN_USBRSTEN		(1 << 1)
-#define DWC3_DEVTEN_DISCONNEVTEN	(1 << 0)
+#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN	BIT(12)
+#define DWC3_DEVTEN_EVNTOVERFLOWEN	BIT(11)
+#define DWC3_DEVTEN_CMDCMPLTEN		BIT(10)
+#define DWC3_DEVTEN_ERRTICERREN		BIT(9)
+#define DWC3_DEVTEN_SOFEN		BIT(7)
+#define DWC3_DEVTEN_EOPFEN		BIT(6)
+#define DWC3_DEVTEN_HIBERNATIONREQEVTEN	BIT(5)
+#define DWC3_DEVTEN_WKUPEVTEN		BIT(4)
+#define DWC3_DEVTEN_ULSTCNGEN		BIT(3)
+#define DWC3_DEVTEN_CONNECTDONEEN	BIT(2)
+#define DWC3_DEVTEN_USBRSTEN		BIT(1)
+#define DWC3_DEVTEN_DISCONNEVTEN	BIT(0)
 
 /* Device Status Register */
-#define DWC3_DSTS_DCNRD			(1 << 29)
+#define DWC3_DSTS_DCNRD			BIT(29)
 
 /* This applies for core versions 1.87a and earlier */
-#define DWC3_DSTS_PWRUPREQ		(1 << 24)
+#define DWC3_DSTS_PWRUPREQ		BIT(24)
 
 /* These apply for core versions 1.94a and later */
-#define DWC3_DSTS_RSS			(1 << 25)
-#define DWC3_DSTS_SSS			(1 << 24)
+#define DWC3_DSTS_RSS			BIT(25)
+#define DWC3_DSTS_SSS			BIT(24)
 
-#define DWC3_DSTS_COREIDLE		(1 << 23)
-#define DWC3_DSTS_DEVCTRLHLT		(1 << 22)
+#define DWC3_DSTS_COREIDLE		BIT(23)
+#define DWC3_DSTS_DEVCTRLHLT		BIT(22)
 
 #define DWC3_DSTS_USBLNKST_MASK		(0x0f << 18)
 #define DWC3_DSTS_USBLNKST(n)		(((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
 
-#define DWC3_DSTS_RXFIFOEMPTY		(1 << 17)
+#define DWC3_DSTS_RXFIFOEMPTY		BIT(17)
 
 #define DWC3_DSTS_SOFFN_MASK		(0x3fff << 3)
 #define DWC3_DSTS_SOFFN(n)		(((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
@@ -403,7 +405,7 @@
 #define DWC3_DSTS_SUPERSPEED_PLUS	(5 << 0) /* DWC_usb31 only */
 #define DWC3_DSTS_SUPERSPEED		(4 << 0)
 #define DWC3_DSTS_HIGHSPEED		(0 << 0)
-#define DWC3_DSTS_FULLSPEED		(1 << 0)
+#define DWC3_DSTS_FULLSPEED		BIT(0)
 #define DWC3_DSTS_LOWSPEED		(2 << 0)
 
 /* Device Generic Command Register */
@@ -421,26 +423,26 @@
 #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
 
 #define DWC3_DGCMD_STATUS(n)		(((n) >> 12) & 0x0F)
-#define DWC3_DGCMD_CMDACT		(1 << 10)
-#define DWC3_DGCMD_CMDIOC		(1 << 8)
+#define DWC3_DGCMD_CMDACT		BIT(10)
+#define DWC3_DGCMD_CMDIOC		BIT(8)
 
 /* Device Generic Command Parameter Register */
-#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT	(1 << 0)
+#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT	BIT(0)
 #define DWC3_DGCMDPAR_FIFO_NUM(n)		((n) << 0)
 #define DWC3_DGCMDPAR_RX_FIFO			(0 << 5)
-#define DWC3_DGCMDPAR_TX_FIFO			(1 << 5)
+#define DWC3_DGCMDPAR_TX_FIFO			BIT(5)
 #define DWC3_DGCMDPAR_LOOPBACK_DIS		(0 << 0)
-#define DWC3_DGCMDPAR_LOOPBACK_ENA		(1 << 0)
+#define DWC3_DGCMDPAR_LOOPBACK_ENA		BIT(0)
 
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT		16
 #define DWC3_DEPCMD_PARAM(x)		((x) << DWC3_DEPCMD_PARAM_SHIFT)
 #define DWC3_DEPCMD_GET_RSC_IDX(x)	(((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
 #define DWC3_DEPCMD_STATUS(x)		(((x) >> 12) & 0x0F)
-#define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
-#define DWC3_DEPCMD_CLEARPENDIN		(1 << 11)
-#define DWC3_DEPCMD_CMDACT		(1 << 10)
-#define DWC3_DEPCMD_CMDIOC		(1 << 8)
+#define DWC3_DEPCMD_HIPRI_FORCERM	BIT(11)
+#define DWC3_DEPCMD_CLEARPENDIN		BIT(11)
+#define DWC3_DEPCMD_CMDACT		BIT(10)
+#define DWC3_DEPCMD_CMDIOC		BIT(8)
 
 #define DWC3_DEPCMD_DEPSTARTCFG		(0x09 << 0)
 #define DWC3_DEPCMD_ENDTRANSFER		(0x08 << 0)
@@ -458,7 +460,7 @@
 #define DWC3_DEPCMD_CMD(x)		((x) & 0xf)
 
 /* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
-#define DWC3_DALEPENA_EP(n)		(1 << n)
+#define DWC3_DALEPENA_EP(n)		BIT(n)
 
 #define DWC3_DEPCMD_TYPE_CONTROL	0
 #define DWC3_DEPCMD_TYPE_ISOC		1
@@ -500,8 +502,8 @@ struct dwc3_event_buffer {
 	struct dwc3		*dwc;
 };
 
-#define DWC3_EP_FLAG_STALLED	(1 << 0)
-#define DWC3_EP_FLAG_WEDGED	(1 << 1)
+#define DWC3_EP_FLAG_STALLED	BIT(0)
+#define DWC3_EP_FLAG_WEDGED	BIT(1)
 
 #define DWC3_EP_DIRECTION_TX	true
 #define DWC3_EP_DIRECTION_RX	false
@@ -550,17 +552,17 @@ struct dwc3_ep {
 
 	u32			saved_state;
 	unsigned		flags;
-#define DWC3_EP_ENABLED		(1 << 0)
-#define DWC3_EP_STALL		(1 << 1)
-#define DWC3_EP_WEDGE		(1 << 2)
-#define DWC3_EP_BUSY		(1 << 4)
-#define DWC3_EP_PENDING_REQUEST	(1 << 5)
-#define DWC3_EP_MISSED_ISOC	(1 << 6)
-#define DWC3_EP_END_TRANSFER_PENDING	(1 << 7)
-#define DWC3_EP_TRANSFER_STARTED (1 << 8)
+#define DWC3_EP_ENABLED		BIT(0)
+#define DWC3_EP_STALL		BIT(1)
+#define DWC3_EP_WEDGE		BIT(2)
+#define DWC3_EP_BUSY		BIT(4)
+#define DWC3_EP_PENDING_REQUEST	BIT(5)
+#define DWC3_EP_MISSED_ISOC	BIT(6)
+#define DWC3_EP_END_TRANSFER_PENDING	BIT(7)
+#define DWC3_EP_TRANSFER_STARTED BIT(8)
 
 	/* This last one is specific to EP0 */
-#define DWC3_EP0_DIR_IN		(1 << 31)
+#define DWC3_EP0_DIR_IN		BIT(31)
 
 	/*
 	 * IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will
@@ -638,13 +640,13 @@ enum dwc3_link_state {
 #define DWC3_TRB_STS_XFER_IN_PROG	4
 
 /* TRB Control */
-#define DWC3_TRB_CTRL_HWO		(1 << 0)
-#define DWC3_TRB_CTRL_LST		(1 << 1)
-#define DWC3_TRB_CTRL_CHN		(1 << 2)
-#define DWC3_TRB_CTRL_CSP		(1 << 3)
+#define DWC3_TRB_CTRL_HWO		BIT(0)
+#define DWC3_TRB_CTRL_LST		BIT(1)
+#define DWC3_TRB_CTRL_CHN		BIT(2)
+#define DWC3_TRB_CTRL_CSP		BIT(3)
 #define DWC3_TRB_CTRL_TRBCTL(n)		(((n) & 0x3f) << 4)
-#define DWC3_TRB_CTRL_ISP_IMI		(1 << 10)
-#define DWC3_TRB_CTRL_IOC		(1 << 11)
+#define DWC3_TRB_CTRL_ISP_IMI		BIT(10)
+#define DWC3_TRB_CTRL_IOC		BIT(11)
 #define DWC3_TRB_CTRL_SID_SOFN(n)	(((n) & 0xffff) << 14)
 
 #define DWC3_TRBCTL_TYPE(n)		((n) & (0x3f << 4))
@@ -746,6 +748,7 @@ struct dwc3_request {
 	unsigned		direction:1;
 	unsigned		mapped:1;
 	unsigned		started:1;
+	unsigned		zero:1;
 };
 
 /*
@@ -758,15 +761,11 @@ struct dwc3_scratchpad_array {
 
 /**
  * struct dwc3 - representation of our controller
- * @ctrl_req: usb control request which is used for ep0
+ * @drd_work - workqueue used for role swapping
  * @ep0_trb: trb which is used for the ctrl_req
- * @ep0_bounce: bounce buffer for ep0
- * @zlp_buf: used when request->zero is set
  * @setup_buf: used while precessing STD USB requests
- * @ctrl_req_addr: dma address of ctrl_req
  * @ep0_trb: dma address of ep0_trb
  * @ep0_usb_req: dummy req used while handling STD USB requests
- * @ep0_bounce_addr: dma address of ep0_bounce
  * @scratch_addr: dma address of scratchbuf
  * @ep0_in_setup: one control transfer is completed and enter setup phase
  * @lock: for synchronizing
@@ -784,6 +783,10 @@ struct dwc3_scratchpad_array {
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
  * @revision: revision register contents
  * @dr_mode: requested mode of operation
+ * @current_dr_role: current role of operation when in dual-role mode
+ * @desired_dr_role: desired role of operation when in dual-role mode
+ * @edev: extcon handle
+ * @edev_nb: extcon notifier
  * @hsphy_mode: UTMI phy mode, one of following:
  *		- USBPHY_INTERFACE_MODE_UTMI
  *		- USBPHY_INTERFACE_MODE_UTMIW
@@ -799,8 +802,7 @@ struct dwc3_scratchpad_array {
  * @u2pel: parameter from Set SEL request.
  * @u1sel: parameter from Set SEL request.
  * @u1pel: parameter from Set SEL request.
- * @num_out_eps: number of out endpoints
- * @num_in_eps: number of in endpoints
+ * @num_eps: number of endpoints
  * @ep0_next_event: hold the next expected event
  * @ep0state: state of endpoint zero
  * @link_state: link state
@@ -858,17 +860,13 @@ struct dwc3_scratchpad_array {
  *                 increments or 0 to disable.
  */
 struct dwc3 {
-	struct usb_ctrlrequest	*ctrl_req;
+	struct work_struct	drd_work;
 	struct dwc3_trb		*ep0_trb;
 	void			*bounce;
-	void			*ep0_bounce;
-	void			*zlp_buf;
 	void			*scratchbuf;
 	u8			*setup_buf;
-	dma_addr_t		ctrl_req_addr;
 	dma_addr_t		ep0_trb_addr;
 	dma_addr_t		bounce_addr;
-	dma_addr_t		ep0_bounce_addr;
 	dma_addr_t		scratch_addr;
 	struct dwc3_request	ep0_usb_req;
 	struct completion	ep0_in_setup;
@@ -900,6 +898,10 @@ struct dwc3 {
 	size_t			regs_size;
 
 	enum usb_dr_mode	dr_mode;
+	u32			current_dr_role;
+	u32			desired_dr_role;
+	struct extcon_dev	*edev;
+	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
 
 	u32			fladj;
@@ -960,8 +962,7 @@ struct dwc3 {
 
 	u8			speed;
 
-	u8			num_out_eps;
-	u8			num_in_eps;
+	u8			num_eps;
 
 	struct dwc3_hwparams	hwparams;
 	struct dentry		*root;
@@ -1010,7 +1011,7 @@ struct dwc3 {
 	u16			imod_interval;
 };
 
-/* -------------------------------------------------------------------------- */
+#define work_to_dwc(w)		(container_of((w), struct dwc3, drd_work))
 
 /* -------------------------------------------------------------------------- */
 
@@ -1054,13 +1055,13 @@ struct dwc3_event_depevt {
 	u32	status:4;
 
 /* Within XferNotReady */
-#define DEPEVT_STATUS_TRANSFER_ACTIVE	(1 << 3)
+#define DEPEVT_STATUS_TRANSFER_ACTIVE	BIT(3)
 
 /* Within XferComplete */
-#define DEPEVT_STATUS_BUSERR	(1 << 0)
-#define DEPEVT_STATUS_SHORT	(1 << 1)
-#define DEPEVT_STATUS_IOC	(1 << 2)
-#define DEPEVT_STATUS_LST	(1 << 3)
+#define DEPEVT_STATUS_BUSERR	BIT(0)
+#define DEPEVT_STATUS_SHORT	BIT(1)
+#define DEPEVT_STATUS_IOC	BIT(2)
+#define DEPEVT_STATUS_LST	BIT(3)
 
 /* Stream event only */
 #define DEPEVT_STREAMEVT_FOUND		1
@@ -1221,6 +1222,16 @@ static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
 { return 0; }
 #endif
 
+#if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+int dwc3_drd_init(struct dwc3 *dwc);
+void dwc3_drd_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_drd_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_drd_exit(struct dwc3 *dwc)
+{ }
+#endif
+
 /* power management interface */
 #if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
 int dwc3_gadget_suspend(struct dwc3 *dwc);

drivers/usb/dwc3/debug.h

@@ -124,6 +124,34 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state)
 	}
 }
 
+/**
+ * dwc3_trb_type_string - returns TRB type as a string
+ * @type: the type of the TRB
+ */
+static inline const char *dwc3_trb_type_string(unsigned int type)
+{
+	switch (type) {
+	case DWC3_TRBCTL_NORMAL:
+		return "normal";
+	case DWC3_TRBCTL_CONTROL_SETUP:
+		return "setup";
+	case DWC3_TRBCTL_CONTROL_STATUS2:
+		return "status2";
+	case DWC3_TRBCTL_CONTROL_STATUS3:
+		return "status3";
+	case DWC3_TRBCTL_CONTROL_DATA:
+		return "data";
+	case DWC3_TRBCTL_ISOCHRONOUS_FIRST:
+		return "isoc-first";
+	case DWC3_TRBCTL_ISOCHRONOUS:
+		return "isoc";
+	case DWC3_TRBCTL_LINK_TRB:
+		return "link";
+	default:
+		return "UNKNOWN";
+	}
+}
+
 static inline const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
 {
 	switch (state) {

drivers/usb/dwc3/debugfs.c

@@ -300,7 +300,7 @@ static int dwc3_mode_show(struct seq_file *s, void *unused)
 		seq_printf(s, "device\n");
 		break;
 	case DWC3_GCTL_PRTCAP_OTG:
-		seq_printf(s, "OTG\n");
+		seq_printf(s, "otg\n");
 		break;
 	default:
 		seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg));
@@ -319,7 +319,6 @@ static ssize_t dwc3_mode_write(struct file *file,
 {
 	struct seq_file		*s = file->private_data;
 	struct dwc3		*dwc = s->private;
-	unsigned long		flags;
 	u32			mode = 0;
 	char			buf[32];
 
@@ -327,19 +326,16 @@ static ssize_t dwc3_mode_write(struct file *file,
 		return -EFAULT;
 
 	if (!strncmp(buf, "host", 4))
-		mode |= DWC3_GCTL_PRTCAP_HOST;
+		mode = DWC3_GCTL_PRTCAP_HOST;
 
 	if (!strncmp(buf, "device", 6))
-		mode |= DWC3_GCTL_PRTCAP_DEVICE;
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
 
 	if (!strncmp(buf, "otg", 3))
-		mode |= DWC3_GCTL_PRTCAP_OTG;
+		mode = DWC3_GCTL_PRTCAP_OTG;
+
+	dwc3_set_mode(dwc, mode);
 
-	if (mode) {
-		spin_lock_irqsave(&dwc->lock, flags);
-		dwc3_set_mode(dwc, mode);
-		spin_unlock_irqrestore(&dwc->lock, flags);
-	}
 	return count;
 }
 
@@ -446,52 +442,7 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused)
 	state = DWC3_DSTS_USBLNKST(reg);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
-	switch (state) {
-	case DWC3_LINK_STATE_U0:
-		seq_printf(s, "U0\n");
-		break;
-	case DWC3_LINK_STATE_U1:
-		seq_printf(s, "U1\n");
-		break;
-	case DWC3_LINK_STATE_U2:
-		seq_printf(s, "U2\n");
-		break;
-	case DWC3_LINK_STATE_U3:
-		seq_printf(s, "U3\n");
-		break;
-	case DWC3_LINK_STATE_SS_DIS:
-		seq_printf(s, "SS.Disabled\n");
-		break;
-	case DWC3_LINK_STATE_RX_DET:
-		seq_printf(s, "Rx.Detect\n");
-		break;
-	case DWC3_LINK_STATE_SS_INACT:
-		seq_printf(s, "SS.Inactive\n");
-		break;
-	case DWC3_LINK_STATE_POLL:
-		seq_printf(s, "Poll\n");
-		break;
-	case DWC3_LINK_STATE_RECOV:
-		seq_printf(s, "Recovery\n");
-		break;
-	case DWC3_LINK_STATE_HRESET:
-		seq_printf(s, "HRESET\n");
-		break;
-	case DWC3_LINK_STATE_CMPLY:
-		seq_printf(s, "Compliance\n");
-		break;
-	case DWC3_LINK_STATE_LPBK:
-		seq_printf(s, "Loopback\n");
-		break;
-	case DWC3_LINK_STATE_RESET:
-		seq_printf(s, "Reset\n");
-		break;
-	case DWC3_LINK_STATE_RESUME:
-		seq_printf(s, "Resume\n");
-		break;
-	default:
-		seq_printf(s, "UNKNOWN %d\n", state);
-	}
+	seq_printf(s, "%s\n", dwc3_gadget_link_string(state));
 
 	return 0;
 }
@@ -689,30 +640,6 @@ out:
 	return 0;
 }
 
-static inline const char *dwc3_trb_type_string(struct dwc3_trb *trb)
-{
-	switch (DWC3_TRBCTL_TYPE(trb->ctrl)) {
-	case DWC3_TRBCTL_NORMAL:
-		return "normal";
-	case DWC3_TRBCTL_CONTROL_SETUP:
-		return "control-setup";
-	case DWC3_TRBCTL_CONTROL_STATUS2:
-		return "control-status2";
-	case DWC3_TRBCTL_CONTROL_STATUS3:
-		return "control-status3";
-	case DWC3_TRBCTL_CONTROL_DATA:
-		return "control-data";
-	case DWC3_TRBCTL_ISOCHRONOUS_FIRST:
-		return "isoc-first";
-	case DWC3_TRBCTL_ISOCHRONOUS:
-		return "isoc";
-	case DWC3_TRBCTL_LINK_TRB:
-		return "link";
-	default:
-		return "UNKNOWN";
-	}
-}
-
 static int dwc3_ep_trb_ring_show(struct seq_file *s, void *unused)
 {
 	struct dwc3_ep		*dep = s->private;
@@ -733,10 +660,11 @@ static int dwc3_ep_trb_ring_show(struct seq_file *s, void *unused)
 
 	for (i = 0; i < DWC3_TRB_NUM; i++) {
 		struct dwc3_trb *trb = &dep->trb_pool[i];
+		unsigned int type = DWC3_TRBCTL_TYPE(trb->ctrl);
 
 		seq_printf(s, "%08x%08x,%d,%s,%d,%d,%d,%d,%d,%d\n",
 				trb->bph, trb->bpl, trb->size,
-				dwc3_trb_type_string(trb),
+				dwc3_trb_type_string(type),
 				!!(trb->ctrl & DWC3_TRB_CTRL_IOC),
 				!!(trb->ctrl & DWC3_TRB_CTRL_ISP_IMI),
 				!!(trb->ctrl & DWC3_TRB_CTRL_CSP),
@@ -822,19 +750,8 @@ static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc,
 {
 	int			i;
 
-	for (i = 0; i < dwc->num_in_eps; i++) {
-		u8		epnum = (i << 1) | 1;
-		struct dwc3_ep	*dep = dwc->eps[epnum];
-
-		if (!dep)
-			continue;
-
-		dwc3_debugfs_create_endpoint_dir(dep, parent);
-	}
-
-	for (i = 0; i < dwc->num_out_eps; i++) {
-		u8		epnum = (i << 1);
-		struct dwc3_ep	*dep = dwc->eps[epnum];
+	for (i = 0; i < dwc->num_eps; i++) {
+		struct dwc3_ep	*dep = dwc->eps[i];
 
 		if (!dep)
 			continue;

drivers/usb/dwc3/drd.c

@@ -0,0 +1,85 @@
+/**
+ * drd.c - DesignWare USB3 DRD Controller Dual-role support
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Roger Quadros <rogerq@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/extcon.h>
+
+#include "debug.h"
+#include "core.h"
+#include "gadget.h"
+
+static void dwc3_drd_update(struct dwc3 *dwc)
+{
+	int id;
+
+	id = extcon_get_state(dwc->edev, EXTCON_USB_HOST);
+	if (id < 0)
+		id = 0;
+
+	dwc3_set_mode(dwc, id ?
+		      DWC3_GCTL_PRTCAP_HOST :
+		      DWC3_GCTL_PRTCAP_DEVICE);
+}
+
+static int dwc3_drd_notifier(struct notifier_block *nb,
+			     unsigned long event, void *ptr)
+{
+	struct dwc3 *dwc = container_of(nb, struct dwc3, edev_nb);
+
+	dwc3_set_mode(dwc, event ?
+		      DWC3_GCTL_PRTCAP_HOST :
+		      DWC3_GCTL_PRTCAP_DEVICE);
+
+	return NOTIFY_DONE;
+}
+
+int dwc3_drd_init(struct dwc3 *dwc)
+{
+	int ret;
+
+	if (dwc->dev->of_node) {
+		if (of_property_read_bool(dwc->dev->of_node, "extcon"))
+			dwc->edev = extcon_get_edev_by_phandle(dwc->dev, 0);
+
+		if (IS_ERR(dwc->edev))
+			return PTR_ERR(dwc->edev);
+
+		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
+		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
+					       &dwc->edev_nb);
+		if (ret < 0) {
+			dev_err(dwc->dev, "couldn't register cable notifier\n");
+			return ret;
+		}
+	}
+
+	dwc3_drd_update(dwc);
+
+	return 0;
+}
+
+void dwc3_drd_exit(struct dwc3 *dwc)
+{
+	extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
+				   &dwc->edev_nb);
+
+	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+	flush_work(&dwc->drd_work);
+	dwc3_gadget_exit(dwc);
+}

drivers/usb/dwc3/dwc3-exynos.c

@@ -147,53 +147,53 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 	exynos->vdd33 = devm_regulator_get(dev, "vdd33");
 	if (IS_ERR(exynos->vdd33)) {
 		ret = PTR_ERR(exynos->vdd33);
-		goto err2;
+		goto vdd33_err;
 	}
 	ret = regulator_enable(exynos->vdd33);
 	if (ret) {
 		dev_err(dev, "Failed to enable VDD33 supply\n");
-		goto err2;
+		goto vdd33_err;
 	}
 
 	exynos->vdd10 = devm_regulator_get(dev, "vdd10");
 	if (IS_ERR(exynos->vdd10)) {
 		ret = PTR_ERR(exynos->vdd10);
-		goto err3;
+		goto vdd10_err;
 	}
 	ret = regulator_enable(exynos->vdd10);
 	if (ret) {
 		dev_err(dev, "Failed to enable VDD10 supply\n");
-		goto err3;
+		goto vdd10_err;
 	}
 
 	ret = dwc3_exynos_register_phys(exynos);
 	if (ret) {
 		dev_err(dev, "couldn't register PHYs\n");
-		goto err4;
+		goto phys_err;
 	}
 
 	if (node) {
 		ret = of_platform_populate(node, NULL, NULL, dev);
 		if (ret) {
 			dev_err(dev, "failed to add dwc3 core\n");
-			goto err5;
+			goto populate_err;
 		}
 	} else {
 		dev_err(dev, "no device node, failed to add dwc3 core\n");
 		ret = -ENODEV;
-		goto err5;
+		goto populate_err;
 	}
 
 	return 0;
 
-err5:
+populate_err:
 	platform_device_unregister(exynos->usb2_phy);
 	platform_device_unregister(exynos->usb3_phy);
-err4:
+phys_err:
 	regulator_disable(exynos->vdd10);
-err3:
+vdd10_err:
 	regulator_disable(exynos->vdd33);
-err2:
+vdd33_err:
 	clk_disable_unprepare(exynos->axius_clk);
 axius_clk_err:
 	clk_disable_unprepare(exynos->susp_clk);

drivers/usb/dwc3/dwc3-omap.c

@@ -79,40 +79,40 @@
 #define USBOTGSS_DEBUG_OFFSET			0x0600
 
 /* SYSCONFIG REGISTER */
-#define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)
+#define USBOTGSS_SYSCONFIG_DMADISABLE		BIT(16)
 
 /* IRQ_EOI REGISTER */
-#define USBOTGSS_IRQ_EOI_LINE_NUMBER		(1 << 0)
+#define USBOTGSS_IRQ_EOI_LINE_NUMBER		BIT(0)
 
 /* IRQS0 BITS */
-#define USBOTGSS_IRQO_COREIRQ_ST		(1 << 0)
+#define USBOTGSS_IRQO_COREIRQ_ST		BIT(0)
 
 /* IRQMISC BITS */
-#define USBOTGSS_IRQMISC_DMADISABLECLR		(1 << 17)
-#define USBOTGSS_IRQMISC_OEVT			(1 << 16)
-#define USBOTGSS_IRQMISC_DRVVBUS_RISE		(1 << 13)
-#define USBOTGSS_IRQMISC_CHRGVBUS_RISE		(1 << 12)
-#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE	(1 << 11)
-#define USBOTGSS_IRQMISC_IDPULLUP_RISE		(1 << 8)
-#define USBOTGSS_IRQMISC_DRVVBUS_FALL		(1 << 5)
-#define USBOTGSS_IRQMISC_CHRGVBUS_FALL		(1 << 4)
-#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL		(1 << 3)
-#define USBOTGSS_IRQMISC_IDPULLUP_FALL		(1 << 0)
+#define USBOTGSS_IRQMISC_DMADISABLECLR		BIT(17)
+#define USBOTGSS_IRQMISC_OEVT			BIT(16)
+#define USBOTGSS_IRQMISC_DRVVBUS_RISE		BIT(13)
+#define USBOTGSS_IRQMISC_CHRGVBUS_RISE		BIT(12)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE	BIT(11)
+#define USBOTGSS_IRQMISC_IDPULLUP_RISE		BIT(8)
+#define USBOTGSS_IRQMISC_DRVVBUS_FALL		BIT(5)
+#define USBOTGSS_IRQMISC_CHRGVBUS_FALL		BIT(4)
+#define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL		BIT(3)
+#define USBOTGSS_IRQMISC_IDPULLUP_FALL		BIT(0)
 
 /* UTMI_OTG_STATUS REGISTER */
-#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS	(1 << 5)
-#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS	(1 << 4)
-#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS	(1 << 3)
-#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP	(1 << 0)
+#define USBOTGSS_UTMI_OTG_STATUS_DRVVBUS	BIT(5)
+#define USBOTGSS_UTMI_OTG_STATUS_CHRGVBUS	BIT(4)
+#define USBOTGSS_UTMI_OTG_STATUS_DISCHRGVBUS	BIT(3)
+#define USBOTGSS_UTMI_OTG_STATUS_IDPULLUP	BIT(0)
 
 /* UTMI_OTG_CTRL REGISTER */
-#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE		(1 << 31)
-#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT	(1 << 9)
-#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE (1 << 8)
-#define USBOTGSS_UTMI_OTG_CTRL_IDDIG		(1 << 4)
-#define USBOTGSS_UTMI_OTG_CTRL_SESSEND		(1 << 3)
-#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID	(1 << 2)
-#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID	(1 << 1)
+#define USBOTGSS_UTMI_OTG_CTRL_SW_MODE		BIT(31)
+#define USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT	BIT(9)
+#define USBOTGSS_UTMI_OTG_CTRL_TXBITSTUFFENABLE BIT(8)
+#define USBOTGSS_UTMI_OTG_CTRL_IDDIG		BIT(4)
+#define USBOTGSS_UTMI_OTG_CTRL_SESSEND		BIT(3)
+#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID	BIT(2)
+#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID	BIT(1)
 
 struct dwc3_omap {
 	struct device		*dev;

drivers/usb/dwc3/ep0.c

@@ -39,14 +39,13 @@ static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		struct dwc3_ep *dep, struct dwc3_request *req);
 
-static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
+static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
 		dma_addr_t buf_dma, u32 len, u32 type, bool chain)
 {
 	struct dwc3_trb			*trb;
-	struct dwc3_ep			*dep;
-
-	dep = dwc->eps[epnum];
+	struct dwc3			*dwc;
 
+	dwc = dep->dwc;
 	trb = &dwc->ep0_trb[dep->trb_enqueue];
 
 	if (chain)
@@ -69,16 +68,17 @@ static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
 	trace_dwc3_prepare_trb(dep, trb);
 }
 
-static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum)
+static int dwc3_ep0_start_trans(struct dwc3_ep *dep)
 {
 	struct dwc3_gadget_ep_cmd_params params;
-	struct dwc3_ep			*dep;
+	struct dwc3			*dwc;
 	int				ret;
 
-	dep = dwc->eps[epnum];
 	if (dep->flags & DWC3_EP_BUSY)
 		return 0;
 
+	dwc = dep->dwc;
+
 	memset(&params, 0, sizeof(params));
 	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
 	params.param1 = lower_32_bits(dwc->ep0_trb_addr);
@@ -279,13 +279,15 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
 
 void dwc3_ep0_out_start(struct dwc3 *dwc)
 {
+	struct dwc3_ep			*dep;
 	int				ret;
 
 	complete(&dwc->ep0_in_setup);
 
-	dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8,
+	dep = dwc->eps[0];
+	dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8,
 			DWC3_TRBCTL_CONTROL_SETUP, false);
-	ret = dwc3_ep0_start_trans(dwc, 0);
+	ret = dwc3_ep0_start_trans(dep);
 	WARN_ON(ret < 0);
 }
 
@@ -794,7 +796,7 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
-	struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
+	struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb;
 	int ret = -EINVAL;
 	u32 len;
 
@@ -834,7 +836,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 	struct usb_request	*ur;
 	struct dwc3_trb		*trb;
 	struct dwc3_ep		*ep0;
-	unsigned		transfer_size = 0;
 	unsigned		maxp;
 	unsigned		remaining_ur_length;
 	void			*buf;
@@ -847,9 +848,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 	ep0 = dwc->eps[0];
 
 	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
-
 	trb = dwc->ep0_trb;
-
 	trace_dwc3_complete_trb(ep0, trb);
 
 	r = next_request(&ep0->pending_list);
@@ -870,58 +869,23 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 	remaining_ur_length = ur->length;
 
 	length = trb->size & DWC3_TRB_SIZE_MASK;
-
 	maxp = ep0->endpoint.maxpacket;
-
-	if (dwc->ep0_bounced) {
-		/*
-		 * Handle the first TRB before handling the bounce buffer if
-		 * the request length is greater than the bounce buffer size
-		 */
-		if (ur->length > DWC3_EP0_BOUNCE_SIZE) {
-			transfer_size = ALIGN(ur->length - maxp, maxp);
-			transferred = transfer_size - length;
-			buf = (u8 *)buf + transferred;
-			ur->actual += transferred;
-			remaining_ur_length -= transferred;
-
-			trb++;
-			length = trb->size & DWC3_TRB_SIZE_MASK;
-
-			ep0->trb_enqueue = 0;
-		}
-
-		transfer_size = roundup((ur->length - transfer_size),
-					maxp);
-
-		transferred = min_t(u32, remaining_ur_length,
-				    transfer_size - length);
-		memcpy(buf, dwc->ep0_bounce, transferred);
-	} else {
-		transferred = ur->length - length;
-	}
-
+	transferred = ur->length - length;
 	ur->actual += transferred;
 
-	if ((epnum & 1) && ur->actual < ur->length) {
-		/* for some reason we did not get everything out */
+	if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
+	     ur->length && ur->zero) || dwc->ep0_bounced) {
+		trb++;
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+		trace_dwc3_complete_trb(ep0, trb);
+		ep0->trb_enqueue = 0;
+		dwc->ep0_bounced = false;
+	}
 
+	if ((epnum & 1) && ur->actual < ur->length)
 		dwc3_ep0_stall_and_restart(dwc);
-	} else {
+	else
 		dwc3_gadget_giveback(ep0, r, 0);
-
-		if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
-				ur->length && ur->zero) {
-			int ret;
-
-			dwc->ep0_next_event = DWC3_EP0_COMPLETE;
-
-			dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr,
-					0, DWC3_TRBCTL_CONTROL_DATA, false);
-			ret = dwc3_ep0_start_trans(dwc, epnum);
-			WARN_ON(ret < 0);
-		}
-	}
 }
 
 static void dwc3_ep0_complete_status(struct dwc3 *dwc,
@@ -997,14 +961,13 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 	req->direction = !!dep->number;
 
 	if (req->request.length == 0) {
-		dwc3_ep0_prepare_one_trb(dwc, dep->number,
-				dwc->ctrl_req_addr, 0,
+		dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0,
 				DWC3_TRBCTL_CONTROL_DATA, false);
-		ret = dwc3_ep0_start_trans(dwc, dep->number);
+		ret = dwc3_ep0_start_trans(dep);
 	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 			&& (dep->number == 0)) {
-		u32	transfer_size = 0;
 		u32	maxpacket;
+		u32	rem;
 
 		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 				&req->request, dep->number);
@@ -1012,36 +975,55 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 			return;
 
 		maxpacket = dep->endpoint.maxpacket;
+		rem = req->request.length % maxpacket;
+		dwc->ep0_bounced = true;
 
-		if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
-			transfer_size = ALIGN(req->request.length - maxpacket,
-					      maxpacket);
-			dwc3_ep0_prepare_one_trb(dwc, dep->number,
-						   req->request.dma,
-						   transfer_size,
-						   DWC3_TRBCTL_CONTROL_DATA,
-						   true);
-		}
-
-		transfer_size = roundup((req->request.length - transfer_size),
-					maxpacket);
+		/* prepare normal TRB */
+		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
+					 req->request.length,
+					 DWC3_TRBCTL_CONTROL_DATA,
+					 true);
+
+		/* Now prepare one extra TRB to align transfer size */
+		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
+					 maxpacket - rem,
+					 DWC3_TRBCTL_CONTROL_DATA,
+					 false);
+		ret = dwc3_ep0_start_trans(dep);
+	} else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
+		   req->request.length && req->request.zero) {
+		u32	maxpacket;
+		u32	rem;
 
-		dwc->ep0_bounced = true;
+		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
+				&req->request, dep->number);
+		if (ret)
+			return;
 
-		dwc3_ep0_prepare_one_trb(dwc, dep->number,
-				dwc->ep0_bounce_addr, transfer_size,
-				DWC3_TRBCTL_CONTROL_DATA, false);
-		ret = dwc3_ep0_start_trans(dwc, dep->number);
+		maxpacket = dep->endpoint.maxpacket;
+		rem = req->request.length % maxpacket;
+
+		/* prepare normal TRB */
+		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
+					 req->request.length,
+					 DWC3_TRBCTL_CONTROL_DATA,
+					 true);
+
+		/* Now prepare one extra TRB to align transfer size */
+		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
+					 0, DWC3_TRBCTL_CONTROL_DATA,
+					 false);
+		ret = dwc3_ep0_start_trans(dep);
 	} else {
 		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 				&req->request, dep->number);
 		if (ret)
 			return;
 
-		dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma,
+		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
 				req->request.length, DWC3_TRBCTL_CONTROL_DATA,
 				false);
-		ret = dwc3_ep0_start_trans(dwc, dep->number);
+		ret = dwc3_ep0_start_trans(dep);
 	}
 
 	WARN_ON(ret < 0);
@@ -1055,9 +1037,8 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
 	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
 		: DWC3_TRBCTL_CONTROL_STATUS2;
 
-	dwc3_ep0_prepare_one_trb(dwc, dep->number,
-			dwc->ctrl_req_addr, 0, type, false);
-	return dwc3_ep0_start_trans(dwc, dep->number);
+	dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false);
+	return dwc3_ep0_start_trans(dep);
 }
 
 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)

drivers/usb/dwc3/gadget.c

@@ -171,7 +171,6 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		int status)
 {
 	struct dwc3			*dwc = dep->dwc;
-	unsigned int			unmap_after_complete = false;
 
 	req->started = false;
 	list_del(&req->list);
@@ -181,19 +180,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
 
-	/*
-	 * NOTICE we don't want to unmap before calling ->complete() if we're
-	 * dealing with a bounced ep0 request. If we unmap it here, we would end
-	 * up overwritting the contents of req->buf and this could confuse the
-	 * gadget driver.
-	 */
-	if (dwc->ep0_bounced && dep->number <= 1) {
-		dwc->ep0_bounced = false;
-		unmap_after_complete = true;
-	} else {
-		usb_gadget_unmap_request_by_dev(dwc->sysdev,
-				&req->request, req->direction);
-	}
+	usb_gadget_unmap_request_by_dev(dwc->sysdev,
+					&req->request, req->direction);
 
 	trace_dwc3_gadget_giveback(req);
 
@@ -201,10 +189,6 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	usb_gadget_giveback_request(&dep->endpoint, &req->request);
 	spin_lock(&dwc->lock);
 
-	if (unmap_after_complete)
-		usb_gadget_unmap_request_by_dev(dwc->sysdev,
-				&req->request, req->direction);
-
 	if (dep->number > 1)
 		pm_runtime_put(dwc->dev);
 }
@@ -1060,6 +1044,22 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 				false, 0, req->request.stream_id,
 				req->request.short_not_ok,
 				req->request.no_interrupt);
+	} else if (req->request.zero && req->request.length &&
+		   (IS_ALIGNED(req->request.length,dep->endpoint.maxpacket))) {
+		struct dwc3	*dwc = dep->dwc;
+		struct dwc3_trb	*trb;
+
+		req->zero = true;
+
+		/* prepare normal TRB */
+		dwc3_prepare_one_trb(dep, req, true, 0);
+
+		/* Now prepare one extra TRB to handle ZLP */
+		trb = &dep->trb_pool[dep->trb_enqueue];
+		__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
+				false, 0, req->request.stream_id,
+				req->request.short_not_ok,
+				req->request.no_interrupt);
 	} else {
 		dwc3_prepare_one_trb(dep, req, false, 0);
 	}
@@ -1184,8 +1184,11 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
 		return;
 	}
 
-	/* 4 micro frames in the future */
-	uf = cur_uf + dep->interval * 4;
+	/*
+	 * Schedule the first trb for one interval in the future or at
+	 * least 4 microframes.
+	 */
+	uf = cur_uf + max_t(u32, 4, dep->interval);
 
 	__dwc3_gadget_kick_transfer(dep, uf);
 }
@@ -1272,31 +1275,6 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 	return ret;
 }
 
-static void __dwc3_gadget_ep_zlp_complete(struct usb_ep *ep,
-		struct usb_request *request)
-{
-	dwc3_gadget_ep_free_request(ep, request);
-}
-
-static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep)
-{
-	struct dwc3_request		*req;
-	struct usb_request		*request;
-	struct usb_ep			*ep = &dep->endpoint;
-
-	request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
-	if (!request)
-		return -ENOMEM;
-
-	request->length = 0;
-	request->buf = dwc->zlp_buf;
-	request->complete = __dwc3_gadget_ep_zlp_complete;
-
-	req = to_dwc3_request(request);
-
-	return __dwc3_gadget_ep_queue(dep, req);
-}
-
 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
 	gfp_t gfp_flags)
 {
@@ -1310,17 +1288,6 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	ret = __dwc3_gadget_ep_queue(dep, req);
-
-	/*
-	 * Okay, here's the thing, if gadget driver has requested for a ZLP by
-	 * setting request->zero, instead of doing magic, we will just queue an
-	 * extra usb_request ourselves so that it gets handled the same way as
-	 * any other request.
-	 */
-	if (ret == 0 && request->zero && request->length &&
-	    (request->length % ep->maxpacket == 0))
-		ret = __dwc3_gadget_ep_queue_zlp(dwc, dep);
-
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
@@ -1400,7 +1367,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 					dwc3_ep_inc_deq(dep);
 				}
 
-				if (r->unaligned) {
+				if (r->unaligned || r->zero) {
 					trb = r->trb + r->num_pending_sgs + 1;
 					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 					dwc3_ep_inc_deq(dep);
@@ -1411,7 +1378,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 				trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 				dwc3_ep_inc_deq(dep);
 
-				if (r->unaligned) {
+				if (r->unaligned || r->zero) {
 					trb = r->trb + 1;
 					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 					dwc3_ep_inc_deq(dep);
@@ -2006,14 +1973,15 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
 
 /* -------------------------------------------------------------------------- */
 
-static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
-		u8 num, u32 direction)
+static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 num)
 {
 	struct dwc3_ep			*dep;
-	u8				i;
+	u8				epnum;
+
+	INIT_LIST_HEAD(&dwc->gadget.ep_list);
 
-	for (i = 0; i < num; i++) {
-		u8 epnum = (i << 1) | (direction ? 1 : 0);
+	for (epnum = 0; epnum < num; epnum++) {
+		bool			direction = epnum & 1;
 
 		dep = kzalloc(sizeof(*dep), GFP_KERNEL);
 		if (!dep)
@@ -2021,12 +1989,12 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 
 		dep->dwc = dwc;
 		dep->number = epnum;
-		dep->direction = !!direction;
+		dep->direction = direction;
 		dep->regs = dwc->regs + DWC3_DEP_BASE(epnum);
 		dwc->eps[epnum] = dep;
 
 		snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
-				(epnum & 1) ? "in" : "out");
+				direction ? "in" : "out");
 
 		dep->endpoint.name = dep->name;
 
@@ -2053,7 +2021,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 			/* MDWIDTH is represented in bits, we need it in bytes */
 			mdwidth /= 8;
 
-			size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(i));
+			size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(epnum >> 1));
 			size = DWC3_GTXFIFOSIZ_TXFDEF(size);
 
 			/* FIFO Depth is in MDWDITH bytes. Multiply */
@@ -2103,7 +2071,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 			dep->endpoint.caps.type_int = true;
 		}
 
-		dep->endpoint.caps.dir_in = !!direction;
+		dep->endpoint.caps.dir_in = direction;
 		dep->endpoint.caps.dir_out = !direction;
 
 		INIT_LIST_HEAD(&dep->pending_list);
@@ -2113,27 +2081,6 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 	return 0;
 }
 
-static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
-{
-	int				ret;
-
-	INIT_LIST_HEAD(&dwc->gadget.ep_list);
-
-	ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
-	if (ret < 0) {
-		dev_err(dwc->dev, "failed to initialize OUT endpoints\n");
-		return ret;
-	}
-
-	ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
-	if (ret < 0) {
-		dev_err(dwc->dev, "failed to initialize IN endpoints\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 {
 	struct dwc3_ep			*dep;
@@ -2197,7 +2144,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	 * with one TRB pending in the ring. We need to manually clear HWO bit
 	 * from that TRB.
 	 */
-	if (req->unaligned && (trb->ctrl & DWC3_TRB_CTRL_HWO)) {
+	if ((req->zero || req->unaligned) && (trb->ctrl & DWC3_TRB_CTRL_HWO)) {
 		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 		return 1;
 	}
@@ -2291,11 +2238,12 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 					event, status, chain);
 		}
 
-		if (req->unaligned) {
+		if (req->unaligned || req->zero) {
 			trb = &dep->trb_pool[dep->trb_dequeue];
 			ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
 					event, status, false);
 			req->unaligned = false;
+			req->zero = false;
 		}
 
 		req->request.actual = length - req->remaining;
@@ -3161,49 +3109,26 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 
 	dwc->irq_gadget = irq;
 
-	dwc->ctrl_req = dma_alloc_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
-			&dwc->ctrl_req_addr, GFP_KERNEL);
-	if (!dwc->ctrl_req) {
-		dev_err(dwc->dev, "failed to allocate ctrl request\n");
-		ret = -ENOMEM;
-		goto err0;
-	}
-
 	dwc->ep0_trb = dma_alloc_coherent(dwc->sysdev,
 					  sizeof(*dwc->ep0_trb) * 2,
 					  &dwc->ep0_trb_addr, GFP_KERNEL);
 	if (!dwc->ep0_trb) {
 		dev_err(dwc->dev, "failed to allocate ep0 trb\n");
 		ret = -ENOMEM;
-		goto err1;
+		goto err0;
 	}
 
-	dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL);
+	dwc->setup_buf = kzalloc(DWC3_EP0_SETUP_SIZE, GFP_KERNEL);
 	if (!dwc->setup_buf) {
 		ret = -ENOMEM;
-		goto err2;
-	}
-
-	dwc->ep0_bounce = dma_alloc_coherent(dwc->sysdev,
-			DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr,
-			GFP_KERNEL);
-	if (!dwc->ep0_bounce) {
-		dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
-		ret = -ENOMEM;
-		goto err3;
-	}
-
-	dwc->zlp_buf = kzalloc(DWC3_ZLP_BUF_SIZE, GFP_KERNEL);
-	if (!dwc->zlp_buf) {
-		ret = -ENOMEM;
-		goto err4;
+		goto err1;
 	}
 
 	dwc->bounce = dma_alloc_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE,
 			&dwc->bounce_addr, GFP_KERNEL);
 	if (!dwc->bounce) {
 		ret = -ENOMEM;
-		goto err5;
+		goto err2;
 	}
 
 	init_completion(&dwc->ep0_in_setup);
@@ -3241,39 +3166,31 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	 * sure we're starting from a well known location.
 	 */
 
-	ret = dwc3_gadget_init_endpoints(dwc);
+	ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps);
 	if (ret)
-		goto err6;
+		goto err3;
 
 	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register udc\n");
-		goto err6;
+		goto err4;
 	}
 
 	return 0;
-err6:
-	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
-			dwc->bounce_addr);
-
-err5:
-	kfree(dwc->zlp_buf);
 
 err4:
 	dwc3_gadget_free_endpoints(dwc);
-	dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE,
-			dwc->ep0_bounce, dwc->ep0_bounce_addr);
 
 err3:
-	kfree(dwc->setup_buf);
+	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
+			dwc->bounce_addr);
 
 err2:
-	dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
-			dwc->ep0_trb, dwc->ep0_trb_addr);
+	kfree(dwc->setup_buf);
 
 err1:
-	dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
-			dwc->ctrl_req, dwc->ctrl_req_addr);
+	dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
+			dwc->ep0_trb, dwc->ep0_trb_addr);
 
 err0:
 	return ret;
@@ -3284,22 +3201,12 @@ err0:
 void dwc3_gadget_exit(struct dwc3 *dwc)
 {
 	usb_del_gadget_udc(&dwc->gadget);
-
 	dwc3_gadget_free_endpoints(dwc);
-
 	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
-			dwc->bounce_addr);
-	dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE,
-			dwc->ep0_bounce, dwc->ep0_bounce_addr);
-
+			  dwc->bounce_addr);
 	kfree(dwc->setup_buf);
-	kfree(dwc->zlp_buf);
-
 	dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
-			dwc->ep0_trb, dwc->ep0_trb_addr);
-
-	dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
-			dwc->ctrl_req, dwc->ctrl_req_addr);
+			  dwc->ep0_trb, dwc->ep0_trb_addr);
 }
 
 int dwc3_gadget_suspend(struct dwc3 *dwc)

drivers/usb/dwc3/gadget.h

@@ -29,16 +29,16 @@ struct dwc3;
 
 /* DEPCFG parameter 1 */
 #define DWC3_DEPCFG_INT_NUM(n)		(((n) & 0x1f) << 0)
-#define DWC3_DEPCFG_XFER_COMPLETE_EN	(1 << 8)
-#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	(1 << 9)
-#define DWC3_DEPCFG_XFER_NOT_READY_EN	(1 << 10)
-#define DWC3_DEPCFG_FIFO_ERROR_EN	(1 << 11)
-#define DWC3_DEPCFG_STREAM_EVENT_EN	(1 << 13)
+#define DWC3_DEPCFG_XFER_COMPLETE_EN	BIT(8)
+#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	BIT(9)
+#define DWC3_DEPCFG_XFER_NOT_READY_EN	BIT(10)
+#define DWC3_DEPCFG_FIFO_ERROR_EN	BIT(11)
+#define DWC3_DEPCFG_STREAM_EVENT_EN	BIT(12)
 #define DWC3_DEPCFG_BINTERVAL_M1(n)	(((n) & 0xff) << 16)
-#define DWC3_DEPCFG_STREAM_CAPABLE	(1 << 24)
+#define DWC3_DEPCFG_STREAM_CAPABLE	BIT(24)
 #define DWC3_DEPCFG_EP_NUMBER(n)	(((n) & 0x1f) << 25)
-#define DWC3_DEPCFG_BULK_BASED		(1 << 30)
-#define DWC3_DEPCFG_FIFO_BASED		(1 << 31)
+#define DWC3_DEPCFG_BULK_BASED		BIT(30)
+#define DWC3_DEPCFG_FIFO_BASED		BIT(31)
 
 /* DEPCFG parameter 0 */
 #define DWC3_DEPCFG_EP_TYPE(n)		(((n) & 0x3) << 1)
@@ -47,10 +47,10 @@ struct dwc3;
 #define DWC3_DEPCFG_BURST_SIZE(n)	(((n) & 0xf) << 22)
 #define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
 /* This applies for core versions earlier than 1.94a */
-#define DWC3_DEPCFG_IGN_SEQ_NUM		(1 << 31)
+#define DWC3_DEPCFG_IGN_SEQ_NUM		BIT(31)
 /* These apply for core versions 1.94a and later */
 #define DWC3_DEPCFG_ACTION_INIT		(0 << 30)
-#define DWC3_DEPCFG_ACTION_RESTORE	(1 << 30)
+#define DWC3_DEPCFG_ACTION_RESTORE	BIT(30)
 #define DWC3_DEPCFG_ACTION_MODIFY	(2 << 30)
 
 /* DEPXFERCFG parameter 0 */

drivers/usb/dwc3/trace.h

@@ -27,31 +27,6 @@
 #include "core.h"
 #include "debug.h"
 
-DECLARE_EVENT_CLASS(dwc3_log_msg,
-	TP_PROTO(struct va_format *vaf),
-	TP_ARGS(vaf),
-	TP_STRUCT__entry(__dynamic_array(char, msg, DWC3_MSG_MAX)),
-	TP_fast_assign(
-		vsnprintf(__get_str(msg), DWC3_MSG_MAX, vaf->fmt, *vaf->va);
-	),
-	TP_printk("%s", __get_str(msg))
-);
-
-DEFINE_EVENT(dwc3_log_msg, dwc3_gadget,
-	TP_PROTO(struct va_format *vaf),
-	TP_ARGS(vaf)
-);
-
-DEFINE_EVENT(dwc3_log_msg, dwc3_core,
-	TP_PROTO(struct va_format *vaf),
-	TP_ARGS(vaf)
-);
-
-DEFINE_EVENT(dwc3_log_msg, dwc3_ep0,
-	TP_PROTO(struct va_format *vaf),
-	TP_ARGS(vaf)
-);
-
 DECLARE_EVENT_CLASS(dwc3_log_io,
 	TP_PROTO(void *base, u32 offset, u32 value),
 	TP_ARGS(base, offset, value),
@@ -198,7 +173,7 @@ DECLARE_EVENT_CLASS(dwc3_log_generic_cmd,
 		__entry->param = param;
 		__entry->status = status;
 	),
-	TP_printk("cmd '%s' [%d] param %08x --> status: %s",
+	TP_printk("cmd '%s' [%x] param %08x --> status: %s",
 		dwc3_gadget_generic_cmd_string(__entry->cmd),
 		__entry->cmd, __entry->param,
 		dwc3_gadget_generic_cmd_status_string(__entry->status)
@@ -298,36 +273,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
 		__entry->ctrl & DWC3_TRB_CTRL_CSP ? 'S' : 's',
 		__entry->ctrl & DWC3_TRB_CTRL_ISP_IMI ? 'S' : 's',
 		__entry->ctrl & DWC3_TRB_CTRL_IOC ? 'C' : 'c',
-		({char *s;
-		switch (__entry->ctrl & 0x3f0) {
-		case DWC3_TRBCTL_NORMAL:
-			s = "normal";
-			break;
-		case DWC3_TRBCTL_CONTROL_SETUP:
-			s = "setup";
-			break;
-		case DWC3_TRBCTL_CONTROL_STATUS2:
-			s = "status2";
-			break;
-		case DWC3_TRBCTL_CONTROL_STATUS3:
-			s = "status3";
-			break;
-		case DWC3_TRBCTL_CONTROL_DATA:
-			s = "data";
-			break;
-		case DWC3_TRBCTL_ISOCHRONOUS_FIRST:
-			s = "isoc-first";
-			break;
-		case DWC3_TRBCTL_ISOCHRONOUS:
-			s = "isoc";
-			break;
-		case DWC3_TRBCTL_LINK_TRB:
-			s = "link";
-			break;
-		default:
-			s = "UNKNOWN";
-			break;
-		} s; })
+		  dwc3_trb_type_string(DWC3_TRBCTL_TYPE(__entry->ctrl))
 	)
 );
 

drivers/usb/gadget/Kconfig

@@ -212,7 +212,7 @@ config USB_F_TCM
 # this first set of drivers all depend on bulk-capable hardware.
 
 config USB_CONFIGFS
-	tristate "USB functions configurable through configfs"
+	tristate "USB Gadget functions configurable through configfs"
 	select USB_LIBCOMPOSITE
 	help
 	  A Linux USB "gadget" can be set up through configfs.
@@ -458,8 +458,9 @@ config USB_CONFIGFS_F_TCM
 	  UAS utilizes the USB 3.0 feature called streams support.
 
 choice
-	tristate "USB Gadget Drivers"
+	tristate "USB Gadget precomposed configurations"
 	default USB_ETH
+	optional
 	help
 	  A Linux "Gadget Driver" talks to the USB Peripheral Controller
 	  driver through the abstract "gadget" API.  Some other operating
@@ -476,6 +477,12 @@ choice
 	  not be able work with that controller, or might need to implement
 	  a less common variant of a device class protocol.
 
+	  The available choices each represent a single precomposed USB
+	  gadget configuration. In the device model, each option contains
+	  both the device instantiation as a child for a USB gadget
+	  controller, and the relevant drivers for each function declared
+	  by the device.
+
 source "drivers/usb/gadget/legacy/Kconfig"
 
 endchoice

drivers/usb/gadget/function/f_fs.c

@@ -246,7 +246,6 @@ EXPORT_SYMBOL_GPL(ffs_lock);
 
 static struct ffs_dev *_ffs_find_dev(const char *name);
 static struct ffs_dev *_ffs_alloc_dev(void);
-static int _ffs_name_dev(struct ffs_dev *dev, const char *name);
 static void _ffs_free_dev(struct ffs_dev *dev);
 static void *ffs_acquire_dev(const char *dev_name);
 static void ffs_release_dev(struct ffs_data *ffs_data);
@@ -3302,9 +3301,10 @@ static struct ffs_dev *_ffs_do_find_dev(const char *name)
 {
 	struct ffs_dev *dev;
 
+	if (!name)
+		return NULL;
+
 	list_for_each_entry(dev, &ffs_devices, entry) {
-		if (!dev->name || !name)
-			continue;
 		if (strcmp(dev->name, name) == 0)
 			return dev;
 	}
@@ -3380,42 +3380,11 @@ static void ffs_free_inst(struct usb_function_instance *f)
 	kfree(opts);
 }
 
-#define MAX_INST_NAME_LEN	40
-
 static int ffs_set_inst_name(struct usb_function_instance *fi, const char *name)
 {
-	struct f_fs_opts *opts;
-	char *ptr;
-	const char *tmp;
-	int name_len, ret;
-
-	name_len = strlen(name) + 1;
-	if (name_len > MAX_INST_NAME_LEN)
+	if (strlen(name) >= FIELD_SIZEOF(struct ffs_dev, name))
 		return -ENAMETOOLONG;
-
-	ptr = kstrndup(name, name_len, GFP_KERNEL);
-	if (!ptr)
-		return -ENOMEM;
-
-	opts = to_f_fs_opts(fi);
-	tmp = NULL;
-
-	ffs_dev_lock();
-
-	tmp = opts->dev->name_allocated ? opts->dev->name : NULL;
-	ret = _ffs_name_dev(opts->dev, ptr);
-	if (ret) {
-		kfree(ptr);
-		ffs_dev_unlock();
-		return ret;
-	}
-	opts->dev->name_allocated = true;
-
-	ffs_dev_unlock();
-
-	kfree(tmp);
-
-	return 0;
+	return ffs_name_dev(to_f_fs_opts(fi)->dev, name);
 }
 
 static struct usb_function_instance *ffs_alloc_inst(void)
@@ -3545,32 +3514,19 @@ static struct ffs_dev *_ffs_alloc_dev(void)
 	return dev;
 }
 
-/*
- * ffs_lock must be taken by the caller of this function
- * The caller is responsible for "name" being available whenever f_fs needs it
- */
-static int _ffs_name_dev(struct ffs_dev *dev, const char *name)
+int ffs_name_dev(struct ffs_dev *dev, const char *name)
 {
 	struct ffs_dev *existing;
+	int ret = 0;
 
-	existing = _ffs_do_find_dev(name);
-	if (existing)
-		return -EBUSY;
-
-	dev->name = name;
-
-	return 0;
-}
+	ffs_dev_lock();
 
-/*
- * The caller is responsible for "name" being available whenever f_fs needs it
- */
-int ffs_name_dev(struct ffs_dev *dev, const char *name)
-{
-	int ret;
+	existing = _ffs_do_find_dev(name);
+	if (!existing)
+		strlcpy(dev->name, name, ARRAY_SIZE(dev->name));
+	else if (existing != dev)
+		ret = -EBUSY;
 
-	ffs_dev_lock();
-	ret = _ffs_name_dev(dev, name);
 	ffs_dev_unlock();
 
 	return ret;
@@ -3600,8 +3556,6 @@ EXPORT_SYMBOL_GPL(ffs_single_dev);
 static void _ffs_free_dev(struct ffs_dev *dev)
 {
 	list_del(&dev->entry);
-	if (dev->name_allocated)
-		kfree(dev->name);
 
 	/* Clear the private_data pointer to stop incorrect dev access */
 	if (dev->ffs_data)

drivers/usb/gadget/function/u_ether.c

@@ -178,6 +178,7 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req);
 static int
 rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
 {
+	struct usb_gadget *g = dev->gadget;
 	struct sk_buff	*skb;
 	int		retval = -ENOMEM;
 	size_t		size = 0;
@@ -209,8 +210,11 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
 	 */
 	size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA;
 	size += dev->port_usb->header_len;
-	size += out->maxpacket - 1;
-	size -= size % out->maxpacket;
+
+	if (g->quirk_ep_out_aligned_size) {
+		size += out->maxpacket - 1;
+		size -= size % out->maxpacket;
+	}
 
 	if (dev->port_usb->is_fixed)
 		size = max_t(size_t, size, dev->port_usb->fixed_out_len);
@@ -401,13 +405,12 @@ done:
 static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
 {
 	struct usb_request	*req;
+	struct usb_request	*tmp;
 	unsigned long		flags;
 
 	/* fill unused rxq slots with some skb */
 	spin_lock_irqsave(&dev->req_lock, flags);
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
+	list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
 		list_del_init(&req->list);
 		spin_unlock_irqrestore(&dev->req_lock, flags);
 
@@ -527,7 +530,7 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 		return NETDEV_TX_BUSY;
 	}
 
-	req = container_of(dev->tx_reqs.next, struct usb_request, list);
+	req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
 	list_del(&req->list);
 
 	/* temporarily stop TX queue when the freelist empties */
@@ -1122,6 +1125,7 @@ void gether_disconnect(struct gether *link)
 {
 	struct eth_dev		*dev = link->ioport;
 	struct usb_request	*req;
+	struct usb_request	*tmp;
 
 	WARN_ON(!dev);
 	if (!dev)
@@ -1138,9 +1142,7 @@ void gether_disconnect(struct gether *link)
 	 */
 	usb_ep_disable(link->in_ep);
 	spin_lock(&dev->req_lock);
-	while (!list_empty(&dev->tx_reqs)) {
-		req = container_of(dev->tx_reqs.next,
-					struct usb_request, list);
+	list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) {
 		list_del(&req->list);
 
 		spin_unlock(&dev->req_lock);
@@ -1152,9 +1154,7 @@ void gether_disconnect(struct gether *link)
 
 	usb_ep_disable(link->out_ep);
 	spin_lock(&dev->req_lock);
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next,
-					struct usb_request, list);
+	list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
 		list_del(&req->list);
 
 		spin_unlock(&dev->req_lock);

drivers/usb/gadget/function/u_fs.h

@@ -40,15 +40,16 @@
 struct f_fs_opts;
 
 struct ffs_dev {
-	const char *name;
-	bool name_allocated;
-	bool mounted;
-	bool desc_ready;
-	bool single;
 	struct ffs_data *ffs_data;
 	struct f_fs_opts *opts;
 	struct list_head entry;
 
+	char name[41];
+
+	bool mounted;
+	bool desc_ready;
+	bool single;
+
 	int (*ffs_ready_callback)(struct ffs_data *ffs);
 	void (*ffs_closed_callback)(struct ffs_data *ffs);
 	void *(*ffs_acquire_dev_callback)(struct ffs_dev *dev);

drivers/usb/gadget/function/uvc_configfs.c

@@ -2125,7 +2125,7 @@ static struct configfs_item_operations uvc_item_ops = {
 	.release		= uvc_attr_release,
 };
 
-#define UVCG_OPTS_ATTR(cname, conv, str2u, uxx, vnoc, limit)		\
+#define UVCG_OPTS_ATTR(cname, aname, conv, str2u, uxx, vnoc, limit)	\
 static ssize_t f_uvc_opts_##cname##_show(				\
 	struct config_item *item, char *page)				\
 {									\
@@ -2168,16 +2168,16 @@ end:									\
 	return ret;							\
 }									\
 									\
-UVC_ATTR(f_uvc_opts_, cname, aname)
+UVC_ATTR(f_uvc_opts_, cname, cname)
 
 #define identity_conv(x) (x)
 
-UVCG_OPTS_ATTR(streaming_interval, identity_conv, kstrtou8, u8, identity_conv,
-	       16);
-UVCG_OPTS_ATTR(streaming_maxpacket, le16_to_cpu, kstrtou16, u16, le16_to_cpu,
-	       3072);
-UVCG_OPTS_ATTR(streaming_maxburst, identity_conv, kstrtou8, u8, identity_conv,
-	       15);
+UVCG_OPTS_ATTR(streaming_interval, streaming_interval, identity_conv,
+	       kstrtou8, u8, identity_conv, 16);
+UVCG_OPTS_ATTR(streaming_maxpacket, streaming_maxpacket, le16_to_cpu,
+	       kstrtou16, u16, le16_to_cpu, 3072);
+UVCG_OPTS_ATTR(streaming_maxburst, streaming_maxburst, identity_conv,
+	       kstrtou8, u8, identity_conv, 15);
 
 #undef identity_conv
 

drivers/usb/gadget/udc/Kconfig

@@ -62,8 +62,9 @@ config USB_ATMEL_USBA
 
 	  The fifo_mode parameter is used to select endpoint allocation mode.
 	  fifo_mode = 0 is used to let the driver autoconfigure the endpoints.
-	  In this case 2 banks are allocated for isochronous endpoints and
-	  only one bank is allocated for the rest of the endpoints.
+	  In this case, for ep1 2 banks are allocated if it works in isochronous
+	  mode and only 1 bank otherwise. For the rest of the endpoints
+	  only 1 bank is allocated.
 
 	  fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration
 	  allowing the usage of ep1 - ep6
@@ -191,6 +192,7 @@ config USB_RENESAS_USBHS_UDC
 config USB_RENESAS_USB3
 	tristate 'Renesas USB3.0 Peripheral controller'
 	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on EXTCON
 	help
 	   Renesas USB3.0 Peripheral controller is a USB peripheral controller
 	   that supports super, high, and full speed USB 3.0 data transfers.
@@ -253,6 +255,20 @@ config USB_MV_U3D
 	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
 	  controller, which support super speed USB peripheral.
 
+config USB_SNP_CORE
+	depends on USB_AMD5536UDC
+	tristate
+	help
+	  This enables core driver support for Synopsys USB 2.0 Device
+	  controller.
+
+	  This will be enabled when PCI or Platform driver for this UDC is
+	  selected. Currently, this will be enabled by USB_SNP_UDC_PLAT or
+	  USB_AMD5536UDC options.
+
+	  This IP is different to the High Speed OTG IP that can be enabled
+	  by selecting USB_DWC2 or USB_DWC3 options.
+
 #
 # Controllers available in both integrated and discrete versions
 #
@@ -278,6 +294,7 @@ source "drivers/usb/gadget/udc/bdc/Kconfig"
 config USB_AMD5536UDC
 	tristate "AMD5536 UDC"
 	depends on USB_PCI
+	select USB_SNP_CORE
 	help
 	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
 	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
@@ -285,6 +302,9 @@ config USB_AMD5536UDC
 	   The UDC port supports OTG operation, and may be used as a host port
 	   if it's not being used to implement peripheral or OTG roles.
 
+	   This UDC is based on Synopsys USB device controller IP and selects
+	   CONFIG_USB_SNP_CORE option to build the core driver.
+
 	   Say "y" to link the driver statically, or "m" to build a
 	   dynamically linked module called "amd5536udc" and force all
 	   gadget drivers to also be dynamically linked.

drivers/usb/gadget/udc/Makefile

@@ -10,7 +10,8 @@ obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
-obj-$(CONFIG_USB_AMD5536UDC)	+= amd5536udc.o
+obj-$(CONFIG_USB_SNP_CORE)	+= amd5536udc.o
+obj-$(CONFIG_USB_AMD5536UDC)	+= amd5536udc_pci.o
 obj-$(CONFIG_USB_PXA25X)	+= pxa25x_udc.o
 obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
 obj-$(CONFIG_USB_GOKU)		+= goku_udc.o

drivers/usb/gadget/udc/amd5536udc.c

@@ -11,27 +11,15 @@
  */
 
 /*
- * The AMD5536 UDC is part of the x86 southbridge AMD Geode CS5536.
- * It is a USB Highspeed DMA capable USB device controller. Beside ep0 it
- * provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
- *
- * Make sure that UDC is assigned to port 4 by BIOS settings (port can also
- * be used as host port) and UOC bits PAD_EN and APU are set (should be done
- * by BIOS init).
- *
- * UDC DMA requires 32-bit aligned buffers so DMA with gadget ether does not
- * work without updating NET_IP_ALIGN. Or PIO mode (module param "use_dma=0")
- * can be used with gadget ether.
+ * This file does the core driver implementation for the UDC that is based
+ * on Synopsys device controller IP (different than HS OTG IP) that is either
+ * connected through PCI bus or integrated to SoC platforms.
  */
 
-/* debug control */
-/* #define UDC_VERBOSE */
-
 /* Driver strings */
-#define UDC_MOD_DESCRIPTION		"AMD 5536 UDC - USB Device Controller"
+#define UDC_MOD_DESCRIPTION		"Synopsys USB Device Controller"
 #define UDC_DRIVER_VERSION_STRING	"01.00.0206"
 
-/* system */
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -46,23 +34,12 @@
 #include <linux/ioctl.h>
 #include <linux/fs.h>
 #include <linux/dmapool.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/prefetch.h>
-
+#include <linux/moduleparam.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
-
-/* gadget stack */
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-/* udc specific */
 #include "amd5536udc.h"
 
-
 static void udc_tasklet_disconnect(unsigned long);
 static void empty_req_queue(struct udc_ep *);
 static void udc_setup_endpoints(struct udc *dev);
@@ -72,7 +49,7 @@ static void udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq);
 
 /* description */
 static const char mod_desc[] = UDC_MOD_DESCRIPTION;
-static const char name[] = "amd5536udc";
+static const char name[] = "udc";
 
 /* structure to hold endpoint function pointers */
 static const struct usb_ep_ops udc_ep_ops;
@@ -208,30 +185,11 @@ static const struct {
 #undef EP_INFO
 };
 
-/* DMA usage flag */
-static bool use_dma = 1;
-/* packet per buffer dma */
-static bool use_dma_ppb = 1;
-/* with per descr. update */
-static bool use_dma_ppb_du;
 /* buffer fill mode */
 static int use_dma_bufferfill_mode;
-/* full speed only mode */
-static bool use_fullspeed;
 /* tx buffer size for high speed */
 static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE;
 
-/* module parameters */
-module_param(use_dma, bool, S_IRUGO);
-MODULE_PARM_DESC(use_dma, "true for DMA");
-module_param(use_dma_ppb, bool, S_IRUGO);
-MODULE_PARM_DESC(use_dma_ppb, "true for DMA in packet per buffer mode");
-module_param(use_dma_ppb_du, bool, S_IRUGO);
-MODULE_PARM_DESC(use_dma_ppb_du,
-	"true for DMA in packet per buffer mode with descriptor update");
-module_param(use_fullspeed, bool, S_IRUGO);
-MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
-
 /*---------------------------------------------------------------------------*/
 /* Prints UDC device registers and endpoint irq registers */
 static void print_regs(struct udc *dev)
@@ -267,7 +225,7 @@ static void print_regs(struct udc *dev)
 }
 
 /* Masks unused interrupts */
-static int udc_mask_unused_interrupts(struct udc *dev)
+int udc_mask_unused_interrupts(struct udc *dev)
 {
 	u32 tmp;
 
@@ -287,6 +245,7 @@ static int udc_mask_unused_interrupts(struct udc *dev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(udc_mask_unused_interrupts);
 
 /* Enables endpoint 0 interrupts */
 static int udc_enable_ep0_interrupts(struct udc *dev)
@@ -306,7 +265,7 @@ static int udc_enable_ep0_interrupts(struct udc *dev)
 }
 
 /* Enables device interrupts for SET_INTF and SET_CONFIG */
-static int udc_enable_dev_setup_interrupts(struct udc *dev)
+int udc_enable_dev_setup_interrupts(struct udc *dev)
 {
 	u32 tmp;
 
@@ -325,6 +284,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(udc_enable_dev_setup_interrupts);
 
 /* Calculates fifo start of endpoint based on preceding endpoints */
 static int udc_set_txfifo_addr(struct udc_ep *ep)
@@ -608,27 +568,23 @@ udc_alloc_request(struct usb_ep *usbep, gfp_t gfp)
 }
 
 /* frees pci pool descriptors of a DMA chain */
-static int udc_free_dma_chain(struct udc *dev, struct udc_request *req)
+static void udc_free_dma_chain(struct udc *dev, struct udc_request *req)
 {
-	int ret_val = 0;
-	struct udc_data_dma	*td;
-	struct udc_data_dma	*td_last = NULL;
+	struct udc_data_dma *td = req->td_data;
 	unsigned int i;
 
+	dma_addr_t addr_next = 0x00;
+	dma_addr_t addr = (dma_addr_t)td->next;
+
 	DBG(dev, "free chain req = %p\n", req);
 
 	/* do not free first desc., will be done by free for request */
-	td_last = req->td_data;
-	td = phys_to_virt(td_last->next);
-
 	for (i = 1; i < req->chain_len; i++) {
-		dma_pool_free(dev->data_requests, td,
-			      (dma_addr_t)td_last->next);
-		td_last = td;
-		td = phys_to_virt(td_last->next);
+		td = phys_to_virt(addr);
+		addr_next = (dma_addr_t)td->next;
+		dma_pool_free(dev->data_requests, td, addr);
+		addr = addr_next;
 	}
-
-	return ret_val;
 }
 
 /* Frees request packet, called by gadget driver */
@@ -1507,7 +1463,7 @@ static void make_ep_lists(struct udc *dev)
 }
 
 /* Inits UDC context */
-static void udc_basic_init(struct udc *dev)
+void udc_basic_init(struct udc *dev)
 {
 	u32	tmp;
 
@@ -1543,6 +1499,7 @@ static void udc_basic_init(struct udc *dev)
 	dev->data_ep_enabled = 0;
 	dev->data_ep_queued = 0;
 }
+EXPORT_SYMBOL_GPL(udc_basic_init);
 
 /* init registers at driver load time */
 static int startup_registers(struct udc *dev)
@@ -3031,7 +2988,7 @@ __acquires(dev->lock)
 }
 
 /* Interrupt Service Routine, see Linux Kernel Doc for parameters */
-static irqreturn_t udc_irq(int irq, void *pdev)
+irqreturn_t udc_irq(int irq, void *pdev)
 {
 	struct udc *dev = pdev;
 	u32 reg;
@@ -3083,16 +3040,18 @@ static irqreturn_t udc_irq(int irq, void *pdev)
 	spin_unlock(&dev->lock);
 	return ret_val;
 }
+EXPORT_SYMBOL_GPL(udc_irq);
 
 /* Tears down device */
-static void gadget_release(struct device *pdev)
+void gadget_release(struct device *pdev)
 {
 	struct amd5536udc *dev = dev_get_drvdata(pdev);
 	kfree(dev);
 }
+EXPORT_SYMBOL_GPL(gadget_release);
 
 /* Cleanup on device remove */
-static void udc_remove(struct udc *dev)
+void udc_remove(struct udc *dev)
 {
 	/* remove timer */
 	stop_timer++;
@@ -3108,9 +3067,10 @@ static void udc_remove(struct udc *dev)
 		del_timer_sync(&udc_pollstall_timer);
 	udc = NULL;
 }
+EXPORT_SYMBOL_GPL(udc_remove);
 
 /* free all the dma pools */
-static void free_dma_pools(struct udc *dev)
+void free_dma_pools(struct udc *dev)
 {
 	dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td,
 		      dev->ep[UDC_EP0OUT_IX].td_phys);
@@ -3119,35 +3079,10 @@ static void free_dma_pools(struct udc *dev)
 	dma_pool_destroy(dev->stp_requests);
 	dma_pool_destroy(dev->data_requests);
 }
-
-/* Reset all pci context */
-static void udc_pci_remove(struct pci_dev *pdev)
-{
-	struct udc		*dev;
-
-	dev = pci_get_drvdata(pdev);
-
-	usb_del_gadget_udc(&udc->gadget);
-	/* gadget driver must not be registered */
-	if (WARN_ON(dev->driver))
-		return;
-
-	/* dma pool cleanup */
-	free_dma_pools(dev);
-
-	/* reset controller */
-	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
-	free_irq(pdev->irq, dev);
-	iounmap(dev->virt_addr);
-	release_mem_region(pci_resource_start(pdev, 0),
-			   pci_resource_len(pdev, 0));
-	pci_disable_device(pdev);
-
-	udc_remove(dev);
-}
+EXPORT_SYMBOL_GPL(free_dma_pools);
 
 /* create dma pools on init */
-static int init_dma_pools(struct udc *dev)
+int init_dma_pools(struct udc *dev)
 {
 	struct udc_stp_dma	*td_stp;
 	struct udc_data_dma	*td_data;
@@ -3210,9 +3145,10 @@ err_create_dma_pool:
 	dev->data_requests = NULL;
 	return retval;
 }
+EXPORT_SYMBOL_GPL(init_dma_pools);
 
 /* general probe */
-static int udc_probe(struct udc *dev)
+int udc_probe(struct udc *dev)
 {
 	char		tmp[128];
 	u32		reg;
@@ -3276,137 +3212,7 @@ static int udc_probe(struct udc *dev)
 finished:
 	return retval;
 }
-
-/* Called by pci bus driver to init pci context */
-static int udc_pci_probe(
-	struct pci_dev *pdev,
-	const struct pci_device_id *id
-)
-{
-	struct udc		*dev;
-	unsigned long		resource;
-	unsigned long		len;
-	int			retval = 0;
-
-	/* one udc only */
-	if (udc) {
-		dev_dbg(&pdev->dev, "already probed\n");
-		return -EBUSY;
-	}
-
-	/* init */
-	dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	/* pci setup */
-	if (pci_enable_device(pdev) < 0) {
-		retval = -ENODEV;
-		goto err_pcidev;
-	}
-
-	/* PCI resource allocation */
-	resource = pci_resource_start(pdev, 0);
-	len = pci_resource_len(pdev, 0);
-
-	if (!request_mem_region(resource, len, name)) {
-		dev_dbg(&pdev->dev, "pci device used already\n");
-		retval = -EBUSY;
-		goto err_memreg;
-	}
-
-	dev->virt_addr = ioremap_nocache(resource, len);
-	if (!dev->virt_addr) {
-		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
-		retval = -EFAULT;
-		goto err_ioremap;
-	}
-
-	if (!pdev->irq) {
-		dev_err(&pdev->dev, "irq not set\n");
-		retval = -ENODEV;
-		goto err_irq;
-	}
-
-	spin_lock_init(&dev->lock);
-	/* udc csr registers base */
-	dev->csr = dev->virt_addr + UDC_CSR_ADDR;
-	/* dev registers base */
-	dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
-	/* ep registers base */
-	dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
-	/* fifo's base */
-	dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
-	dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
-
-	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
-		dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
-		retval = -EBUSY;
-		goto err_irq;
-	}
-
-	pci_set_drvdata(pdev, dev);
-
-	/* chip revision for Hs AMD5536 */
-	dev->chiprev = pdev->revision;
-
-	pci_set_master(pdev);
-	pci_try_set_mwi(pdev);
-
-	/* init dma pools */
-	if (use_dma) {
-		retval = init_dma_pools(dev);
-		if (retval != 0)
-			goto err_dma;
-	}
-
-	dev->phys_addr = resource;
-	dev->irq = pdev->irq;
-	dev->pdev = pdev;
-
-	/* general probing */
-	if (udc_probe(dev)) {
-		retval = -ENODEV;
-		goto err_probe;
-	}
-	return 0;
-
-err_probe:
-	if (use_dma)
-		free_dma_pools(dev);
-err_dma:
-	free_irq(pdev->irq, dev);
-err_irq:
-	iounmap(dev->virt_addr);
-err_ioremap:
-	release_mem_region(resource, len);
-err_memreg:
-	pci_disable_device(pdev);
-err_pcidev:
-	kfree(dev);
-	return retval;
-}
-
-/* PCI device parameters */
-static const struct pci_device_id pci_id[] = {
-	{
-		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
-		.class =	PCI_CLASS_SERIAL_USB_DEVICE,
-		.class_mask =	0xffffffff,
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(pci, pci_id);
-
-/* PCI functions */
-static struct pci_driver udc_pci_driver = {
-	.name =		(char *) name,
-	.id_table =	pci_id,
-	.probe =	udc_pci_probe,
-	.remove =	udc_pci_remove,
-};
-
-module_pci_driver(udc_pci_driver);
+EXPORT_SYMBOL_GPL(udc_probe);
 
 MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
 MODULE_AUTHOR("Thomas Dahlmann");

drivers/usb/gadget/udc/amd5536udc.h

@@ -13,6 +13,12 @@
 #ifndef AMD5536UDC_H
 #define AMD5536UDC_H
 
+/* debug control */
+/* #define UDC_VERBOSE */
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
 /* various constants */
 #define UDC_RDE_TIMER_SECONDS		1
 #define UDC_RDE_TIMER_DIV		10
@@ -567,6 +573,36 @@ union udc_setup_data {
 	struct usb_ctrlrequest	request;
 };
 
+/* Function declarations */
+int udc_enable_dev_setup_interrupts(struct udc *dev);
+int udc_mask_unused_interrupts(struct udc *dev);
+irqreturn_t udc_irq(int irq, void *pdev);
+void gadget_release(struct device *pdev);
+void udc_basic_init(struct udc *dev);
+void free_dma_pools(struct udc *dev);
+int init_dma_pools(struct udc *dev);
+void udc_remove(struct udc *dev);
+int udc_probe(struct udc *dev);
+
+/* DMA usage flag */
+static bool use_dma = 1;
+/* packet per buffer dma */
+static bool use_dma_ppb = 1;
+/* with per descr. update */
+static bool use_dma_ppb_du;
+/* full speed only mode */
+static bool use_fullspeed;
+
+/* module parameters */
+module_param(use_dma, bool, S_IRUGO);
+MODULE_PARM_DESC(use_dma, "true for DMA");
+module_param(use_dma_ppb, bool, S_IRUGO);
+MODULE_PARM_DESC(use_dma_ppb, "true for DMA in packet per buffer mode");
+module_param(use_dma_ppb_du, bool, S_IRUGO);
+MODULE_PARM_DESC(use_dma_ppb_du,
+	"true for DMA in packet per buffer mode with descriptor update");
+module_param(use_fullspeed, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
 /*
  *---------------------------------------------------------------------------
  * SET and GET bitfields in u32 values

drivers/usb/gadget/udc/amd5536udc_pci.c

@@ -0,0 +1,217 @@
+/*
+ * amd5536udc_pci.c -- AMD 5536 UDC high/full speed USB device controller
+ *
+ * Copyright (C) 2005-2007 AMD (http://www.amd.com)
+ * Author: Thomas Dahlmann
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * The AMD5536 UDC is part of the x86 southbridge AMD Geode CS5536.
+ * It is a USB Highspeed DMA capable USB device controller. Beside ep0 it
+ * provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+ *
+ * Make sure that UDC is assigned to port 4 by BIOS settings (port can also
+ * be used as host port) and UOC bits PAD_EN and APU are set (should be done
+ * by BIOS init).
+ *
+ * UDC DMA requires 32-bit aligned buffers so DMA with gadget ether does not
+ * work without updating NET_IP_ALIGN. Or PIO mode (module param "use_dma=0")
+ * can be used with gadget ether.
+ *
+ * This file does pci device registration, and the core driver implementation
+ * is done in amd5536udc.c
+ *
+ * The driver is split so as to use the core UDC driver which is based on
+ * Synopsys device controller IP (different than HS OTG IP) in UDCs
+ * integrated to SoC platforms.
+ *
+ */
+
+/* Driver strings */
+#define UDC_MOD_DESCRIPTION		"AMD 5536 UDC - USB Device Controller"
+
+/* system */
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/prefetch.h>
+#include <linux/pci.h>
+
+/* udc specific */
+#include "amd5536udc.h"
+
+/* pointer to device object */
+static struct udc *udc;
+
+/* description */
+static const char mod_desc[] = UDC_MOD_DESCRIPTION;
+static const char name[] = "amd5536udc-pci";
+
+/* Reset all pci context */
+static void udc_pci_remove(struct pci_dev *pdev)
+{
+	struct udc		*dev;
+
+	dev = pci_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+	/* gadget driver must not be registered */
+	if (WARN_ON(dev->driver))
+		return;
+
+	/* dma pool cleanup */
+	free_dma_pools(dev);
+
+	/* reset controller */
+	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
+	free_irq(pdev->irq, dev);
+	iounmap(dev->virt_addr);
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+	pci_disable_device(pdev);
+
+	udc_remove(dev);
+}
+
+/* Called by pci bus driver to init pci context */
+static int udc_pci_probe(
+	struct pci_dev *pdev,
+	const struct pci_device_id *id
+)
+{
+	struct udc		*dev;
+	unsigned long		resource;
+	unsigned long		len;
+	int			retval = 0;
+
+	/* one udc only */
+	if (udc) {
+		dev_dbg(&pdev->dev, "already probed\n");
+		return -EBUSY;
+	}
+
+	/* init */
+	dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	/* pci setup */
+	if (pci_enable_device(pdev) < 0) {
+		retval = -ENODEV;
+		goto err_pcidev;
+	}
+
+	/* PCI resource allocation */
+	resource = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+
+	if (!request_mem_region(resource, len, name)) {
+		dev_dbg(&pdev->dev, "pci device used already\n");
+		retval = -EBUSY;
+		goto err_memreg;
+	}
+
+	dev->virt_addr = ioremap_nocache(resource, len);
+	if (!dev->virt_addr) {
+		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
+		retval = -EFAULT;
+		goto err_ioremap;
+	}
+
+	if (!pdev->irq) {
+		dev_err(&pdev->dev, "irq not set\n");
+		retval = -ENODEV;
+		goto err_irq;
+	}
+
+	spin_lock_init(&dev->lock);
+	/* udc csr registers base */
+	dev->csr = dev->virt_addr + UDC_CSR_ADDR;
+	/* dev registers base */
+	dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
+	/* ep registers base */
+	dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
+	/* fifo's base */
+	dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
+	dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
+
+	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
+		dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
+		retval = -EBUSY;
+		goto err_irq;
+	}
+
+	pci_set_drvdata(pdev, dev);
+
+	/* chip revision for Hs AMD5536 */
+	dev->chiprev = pdev->revision;
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	/* init dma pools */
+	if (use_dma) {
+		retval = init_dma_pools(dev);
+		if (retval != 0)
+			goto err_dma;
+	}
+
+	dev->phys_addr = resource;
+	dev->irq = pdev->irq;
+	dev->pdev = pdev;
+
+	/* general probing */
+	if (udc_probe(dev)) {
+		retval = -ENODEV;
+		goto err_probe;
+	}
+	return 0;
+
+err_probe:
+	if (use_dma)
+		free_dma_pools(dev);
+err_dma:
+	free_irq(pdev->irq, dev);
+err_irq:
+	iounmap(dev->virt_addr);
+err_ioremap:
+	release_mem_region(resource, len);
+err_memreg:
+	pci_disable_device(pdev);
+err_pcidev:
+	kfree(dev);
+	return retval;
+}
+
+/* PCI device parameters */
+static const struct pci_device_id pci_id[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
+		.class =	PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask =	0xffffffff,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(pci, pci_id);
+
+/* PCI functions */
+static struct pci_driver udc_pci_driver = {
+	.name =		(char *) name,
+	.id_table =	pci_id,
+	.probe =	udc_pci_probe,
+	.remove =	udc_pci_remove,
+};
+module_pci_driver(udc_pci_driver);
+
+MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
+MODULE_AUTHOR("Thomas Dahlmann");
+MODULE_LICENSE("GPL");

drivers/usb/gadget/udc/atmel_usba_udc.c

@@ -321,7 +321,6 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc)
 
 static ushort fifo_mode;
 
-/* "modprobe ... fifo_mode=1" etc */
 module_param(fifo_mode, ushort, 0x0);
 MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode");
 
@@ -371,7 +370,7 @@ static struct usba_fifo_cfg mode_4_cfg[] = {
 };
 /* Add additional configurations here */
 
-int usba_config_fifo_table(struct usba_udc *udc)
+static int usba_config_fifo_table(struct usba_udc *udc)
 {
 	int n;
 
@@ -1076,11 +1075,9 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver);
 static int atmel_usba_stop(struct usb_gadget *gadget);
 
-static struct usb_ep *atmel_usba_match_ep(
-		struct usb_gadget		*gadget,
-		struct usb_endpoint_descriptor	*desc,
-		struct usb_ss_ep_comp_descriptor *ep_comp
-)
+static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget,
+				struct usb_endpoint_descriptor	*desc,
+				struct usb_ss_ep_comp_descriptor *ep_comp)
 {
 	struct usb_ep	*_ep;
 	struct usba_ep *ep;
@@ -1100,7 +1097,6 @@ found_ep:
 		ep = to_usba_ep(_ep);
 
 		switch (usb_endpoint_type(desc)) {
-
 		case USB_ENDPOINT_XFER_CONTROL:
 			break;
 
@@ -1141,7 +1137,7 @@ found_ep:
 		ep->udc->configured_ep++;
 	}
 
-return _ep;
+	return _ep;
 }
 
 static const struct usb_gadget_ops usba_udc_ops = {
@@ -1855,8 +1851,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 		 * but it's clearly harmless...
 		 */
 		if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
-			dev_dbg(&udc->pdev->dev,
-				 "ODD: EP0 configuration is invalid!\n");
+			dev_err(&udc->pdev->dev,
+				"ODD: EP0 configuration is invalid!\n");
 
 		/* Preallocate other endpoints */
 		n = fifo_mode ? udc->num_ep : udc->configured_ep;
@@ -1864,8 +1860,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 			ep = &udc->usba_ep[i];
 			usba_ep_writel(ep, CFG, ep->ept_cfg);
 			if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
-				dev_dbg(&udc->pdev->dev,
-				 "ODD: EP%d configuration is invalid!\n", i);
+				dev_err(&udc->pdev->dev,
+					"ODD: EP%d configuration is invalid!\n", i);
 		}
 	}
 
@@ -2089,8 +2085,9 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 		while ((pp = of_get_next_child(np, pp)))
 			udc->num_ep++;
 		udc->configured_ep = 1;
-	} else
+	} else {
 		udc->num_ep = usba_config_fifo_table(udc);
+	}
 
 	eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep,
 			   GFP_KERNEL);
@@ -2118,14 +2115,34 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 			dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret);
 			goto err;
 		}
-		ep->fifo_size = fifo_mode ? udc->fifo_cfg[i].fifo_size : val;
+		if (fifo_mode) {
+			if (val < udc->fifo_cfg[i].fifo_size) {
+				dev_warn(&pdev->dev,
+					 "Using max fifo-size value from DT\n");
+				ep->fifo_size = val;
+			} else {
+				ep->fifo_size = udc->fifo_cfg[i].fifo_size;
+			}
+		} else {
+			ep->fifo_size = val;
+		}
 
 		ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
 		if (ret) {
 			dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret);
 			goto err;
 		}
-		ep->nr_banks = fifo_mode ? udc->fifo_cfg[i].nr_banks : val;
+		if (fifo_mode) {
+			if (val < udc->fifo_cfg[i].nr_banks) {
+				dev_warn(&pdev->dev,
+					 "Using max nb-banks value from DT\n");
+				ep->nr_banks = val;
+			} else {
+				ep->nr_banks = udc->fifo_cfg[i].nr_banks;
+			}
+		} else {
+			ep->nr_banks = val;
+		}
 
 		ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
 		ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");

drivers/usb/gadget/udc/core.c

@@ -1273,6 +1273,7 @@ void usb_del_gadget_udc(struct usb_gadget *gadget)
 	flush_work(&gadget->work);
 	device_unregister(&udc->dev);
 	device_unregister(&gadget->dev);
+	memset(&gadget->dev, 0x00, sizeof(gadget->dev));
 }
 EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
 

drivers/usb/gadget/udc/dummy_hcd.c

@@ -2062,16 +2062,13 @@ static int dummy_hub_control(
 			}
 			break;
 		case USB_PORT_FEAT_POWER:
-			if (hcd->speed == HCD_USB3) {
-				if (dum_hcd->port_status & USB_PORT_STAT_POWER)
-					dev_dbg(dummy_dev(dum_hcd),
-						"power-off\n");
-			} else
-				if (dum_hcd->port_status &
-							USB_SS_PORT_STAT_POWER)
-					dev_dbg(dummy_dev(dum_hcd),
-						"power-off\n");
-			/* FALLS THROUGH */
+			dev_dbg(dummy_dev(dum_hcd), "power-off\n");
+			if (hcd->speed == HCD_USB3)
+				dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER;
+			else
+				dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
+			set_link_state(dum_hcd);
+			break;
 		default:
 			dum_hcd->port_status &= ~(1 << wValue);
 			set_link_state(dum_hcd);
@@ -2242,14 +2239,13 @@ static int dummy_hub_control(
 				if ((dum_hcd->port_status &
 				     USB_SS_PORT_STAT_POWER) != 0) {
 					dum_hcd->port_status |= (1 << wValue);
-					set_link_state(dum_hcd);
 				}
 			} else
 				if ((dum_hcd->port_status &
 				     USB_PORT_STAT_POWER) != 0) {
 					dum_hcd->port_status |= (1 << wValue);
-					set_link_state(dum_hcd);
 				}
+			set_link_state(dum_hcd);
 		}
 		break;
 	case GetPortErrorCount:

drivers/usb/gadget/udc/fsl_udc_core.c

@@ -2675,6 +2675,8 @@ static const struct platform_device_id fsl_udc_devtype[] = {
 		.name = "imx-udc-mx27",
 	}, {
 		.name = "imx-udc-mx51",
+	}, {
+		.name = "fsl-usb2-udc",
 	}, {
 		/* sentinel */
 	}

drivers/usb/gadget/udc/mv_u3d_core.c

@@ -1835,13 +1835,18 @@ static int mv_u3d_probe(struct platform_device *dev)
 	}
 
 	/* we will access controller register, so enable the u3d controller */
-	clk_enable(u3d->clk);
+	retval = clk_enable(u3d->clk);
+	if (retval) {
+		dev_err(&dev->dev, "clk_enable error %d\n", retval);
+		goto err_u3d_enable;
+	}
 
 	if (pdata->phy_init) {
 		retval = pdata->phy_init(u3d->phy_regs);
 		if (retval) {
 			dev_err(&dev->dev, "init phy error %d\n", retval);
-			goto err_u3d_enable;
+			clk_disable(u3d->clk);
+			goto err_phy_init;
 		}
 	}
 
@@ -1974,15 +1979,13 @@ err_alloc_trb_pool:
 	dma_free_coherent(&dev->dev, u3d->ep_context_size,
 		u3d->ep_context, u3d->ep_context_dma);
 err_alloc_ep_context:
-	if (pdata->phy_deinit)
-		pdata->phy_deinit(u3d->phy_regs);
-	clk_disable(u3d->clk);
+err_phy_init:
 err_u3d_enable:
 	iounmap(u3d->cap_regs);
 err_map_cap_regs:
 err_get_cap_regs:
-err_get_clk:
 	clk_put(u3d->clk);
+err_get_clk:
 	kfree(u3d);
 err_alloc_private:
 err_pdata:

drivers/usb/gadget/udc/mv_udc_core.c

@@ -445,7 +445,8 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	struct mv_dqh *dqh;
 	u16 max = 0;
 	u32 bit_pos, epctrlx, direction;
-	unsigned char zlt = 0, ios = 0, mult = 0;
+	const unsigned char zlt = 1;
+	unsigned char ios, mult;
 	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
@@ -465,8 +466,6 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	 * disable HW zero length termination select
 	 * driver handles zero length packet through req->req.zero
 	 */
-	zlt = 1;
-
 	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
 
 	/* Check if the Endpoint is Primed */
@@ -481,16 +480,16 @@ static int mv_ep_enable(struct usb_ep *_ep,
 			(unsigned)bit_pos);
 		goto en_done;
 	}
+
 	/* Set the max packet length, interrupt on Setup and Mult fields */
+	ios = 0;
+	mult = 0;
 	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 	case USB_ENDPOINT_XFER_BULK:
-		zlt = 1;
-		mult = 0;
+	case USB_ENDPOINT_XFER_INT:
 		break;
 	case USB_ENDPOINT_XFER_CONTROL:
 		ios = 1;
-	case USB_ENDPOINT_XFER_INT:
-		mult = 0;
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
 		/* Calculate transactions needed for high bandwidth iso */

drivers/usb/gadget/udc/pxa27x_udc.c

@@ -1608,9 +1608,6 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active)
 	return 0;
 }
 
-static void udc_enable(struct pxa_udc *udc);
-static void udc_disable(struct pxa_udc *udc);
-
 /**
  * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc
  * @_gadget: usb gadget

drivers/usb/gadget/udc/renesas_usb3.c

@@ -10,6 +10,7 @@
 
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/extcon.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -37,6 +38,9 @@
 #define USB3_USB_INT_ENA_2	0x22c
 #define USB3_STUP_DAT_0		0x230
 #define USB3_STUP_DAT_1		0x234
+#define USB3_USB_OTG_STA	0x268
+#define USB3_USB_OTG_INT_STA	0x26c
+#define USB3_USB_OTG_INT_ENA	0x270
 #define USB3_P0_MOD		0x280
 #define USB3_P0_CON		0x288
 #define USB3_P0_STA		0x28c
@@ -124,6 +128,9 @@
 /* USB_INT_ENA_2 and USB_INT_STA_2 */
 #define USB_INT_2_PIPE(n)	BIT(n)
 
+/* USB_OTG_STA, USB_OTG_INT_STA and USB_OTG_INT_ENA */
+#define USB_OTG_IDMON		BIT(4)
+
 /* P0_MOD */
 #define P0_MOD_DIR		BIT(6)
 
@@ -257,6 +264,8 @@ struct renesas_usb3 {
 
 	struct usb_gadget gadget;
 	struct usb_gadget_driver *driver;
+	struct extcon_dev *extcon;
+	struct work_struct extcon_work;
 
 	struct renesas_usb3_ep *usb3_ep;
 	int num_usb3_eps;
@@ -269,6 +278,8 @@ struct renesas_usb3 {
 	u8 ep0_buf[USB3_EP0_BUF_SIZE];
 	bool softconnect;
 	bool workaround_for_vbus;
+	bool extcon_host;		/* check id and set EXTCON_USB_HOST */
+	bool extcon_usb;		/* check vbus and set EXTCON_USB */
 };
 
 #define gadget_to_renesas_usb3(_gadget)	\
@@ -332,6 +343,15 @@ static int usb3_wait(struct renesas_usb3 *usb3, u32 reg, u32 mask,
 	return -EBUSY;
 }
 
+static void renesas_usb3_extcon_work(struct work_struct *work)
+{
+	struct renesas_usb3 *usb3 = container_of(work, struct renesas_usb3,
+						 extcon_work);
+
+	extcon_set_state_sync(usb3->extcon, EXTCON_USB_HOST, usb3->extcon_host);
+	extcon_set_state_sync(usb3->extcon, EXTCON_USB, usb3->extcon_usb);
+}
+
 static void usb3_enable_irq_1(struct renesas_usb3 *usb3, u32 bits)
 {
 	usb3_set_bit(usb3, bits, USB3_USB_INT_ENA_1);
@@ -352,6 +372,11 @@ static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num)
 	usb3_clear_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2);
 }
 
+static bool usb3_is_host(struct renesas_usb3 *usb3)
+{
+	return !(usb3_read(usb3, USB3_DRD_CON) & DRD_CON_PERI_CON);
+}
+
 static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
 {
 	/* Set AXI_INT */
@@ -362,10 +387,6 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
 
 static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
 {
-	/* FIXME: How to change host / peripheral mode as well? */
-	usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
-	usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
-
 	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
 	usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
 }
@@ -531,18 +552,70 @@ static void usb3_check_vbus(struct renesas_usb3 *usb3)
 	if (usb3->workaround_for_vbus) {
 		usb3_connect(usb3);
 	} else {
-		if (usb3_read(usb3, USB3_USB_STA) & USB_STA_VBUS_STA)
+		usb3->extcon_usb = !!(usb3_read(usb3, USB3_USB_STA) &
+							USB_STA_VBUS_STA);
+		if (usb3->extcon_usb)
 			usb3_connect(usb3);
 		else
 			usb3_disconnect(usb3);
+
+		schedule_work(&usb3->extcon_work);
 	}
 }
 
+static void usb3_set_mode(struct renesas_usb3 *usb3, bool host)
+{
+	if (host)
+		usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+	else
+		usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+}
+
+static void usb3_vbus_out(struct renesas_usb3 *usb3, bool enable)
+{
+	if (enable)
+		usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
+	else
+		usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
+}
+
+static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	usb3_set_mode(usb3, host);
+	usb3_vbus_out(usb3, a_dev);
+	if (!host && a_dev)		/* for A-Peripheral */
+		usb3_connect(usb3);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+}
+
+static bool usb3_is_a_device(struct renesas_usb3 *usb3)
+{
+	return !(usb3_read(usb3, USB3_USB_OTG_STA) & USB_OTG_IDMON);
+}
+
+static void usb3_check_id(struct renesas_usb3 *usb3)
+{
+	usb3->extcon_host = usb3_is_a_device(usb3);
+
+	if (usb3->extcon_host)
+		usb3_mode_config(usb3, true, true);
+	else
+		usb3_mode_config(usb3, false, false);
+
+	schedule_work(&usb3->extcon_work);
+}
+
 static void renesas_usb3_init_controller(struct renesas_usb3 *usb3)
 {
 	usb3_init_axi_bridge(usb3);
 	usb3_init_epc_registers(usb3);
+	usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_STA);
+	usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_ENA);
 
+	usb3_check_id(usb3);
 	usb3_check_vbus(usb3);
 }
 
@@ -551,6 +624,7 @@ static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3)
 	usb3_disconnect(usb3);
 	usb3_write(usb3, 0, USB3_P0_INT_ENA);
 	usb3_write(usb3, 0, USB3_PN_INT_ENA);
+	usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA);
 	usb3_write(usb3, 0, USB3_USB_INT_ENA_1);
 	usb3_write(usb3, 0, USB3_USB_INT_ENA_2);
 	usb3_write(usb3, 0, USB3_AXI_INT_ENA);
@@ -1474,10 +1548,22 @@ static void usb3_irq_epc_int_2(struct renesas_usb3 *usb3, u32 int_sta_2)
 	}
 }
 
+static void usb3_irq_idmon_change(struct renesas_usb3 *usb3)
+{
+	usb3_check_id(usb3);
+}
+
+static void usb3_irq_otg_int(struct renesas_usb3 *usb3, u32 otg_int_sta)
+{
+	if (otg_int_sta & USB_OTG_IDMON)
+		usb3_irq_idmon_change(usb3);
+}
+
 static void usb3_irq_epc(struct renesas_usb3 *usb3)
 {
 	u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1);
 	u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2);
+	u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA);
 
 	int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1);
 	if (int_sta_1) {
@@ -1488,6 +1574,12 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3)
 	int_sta_2 &= usb3_read(usb3, USB3_USB_INT_ENA_2);
 	if (int_sta_2)
 		usb3_irq_epc_int_2(usb3, int_sta_2);
+
+	otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA);
+	if (otg_int_sta) {
+		usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA);
+		usb3_irq_otg_int(usb3, otg_int_sta);
+	}
 }
 
 static irqreturn_t renesas_usb3_irq(int irq, void *_usb3)
@@ -1756,11 +1848,49 @@ static const struct usb_gadget_ops renesas_usb3_gadget_ops = {
 	.set_selfpowered	= renesas_usb3_set_selfpowered,
 };
 
+static ssize_t role_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+	bool new_mode_is_host;
+
+	if (!usb3->driver)
+		return -ENODEV;
+
+	if (!strncmp(buf, "host", strlen("host")))
+		new_mode_is_host = true;
+	else if (!strncmp(buf, "peripheral", strlen("peripheral")))
+		new_mode_is_host = false;
+	else
+		return -EINVAL;
+
+	if (new_mode_is_host == usb3_is_host(usb3))
+		return -EINVAL;
+
+	usb3_mode_config(usb3, new_mode_is_host, usb3_is_a_device(usb3));
+
+	return count;
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+	if (!usb3->driver)
+		return -ENODEV;
+
+	return sprintf(buf, "%s\n", usb3_is_host(usb3) ? "host" : "peripheral");
+}
+static DEVICE_ATTR_RW(role);
+
 /*------- platform_driver ------------------------------------------------*/
 static int renesas_usb3_remove(struct platform_device *pdev)
 {
 	struct renesas_usb3 *usb3 = platform_get_drvdata(pdev);
 
+	device_remove_file(&pdev->dev, &dev_attr_role);
+
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
@@ -1894,6 +2024,12 @@ static const struct of_device_id usb3_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, usb3_of_match);
 
+static const unsigned int renesas_usb3_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
 static int renesas_usb3_probe(struct platform_device *pdev)
 {
 	struct renesas_usb3 *usb3;
@@ -1937,6 +2073,17 @@ static int renesas_usb3_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	INIT_WORK(&usb3->extcon_work, renesas_usb3_extcon_work);
+	usb3->extcon = devm_extcon_dev_allocate(&pdev->dev, renesas_usb3_cable);
+	if (IS_ERR(usb3->extcon))
+		return PTR_ERR(usb3->extcon);
+
+	ret = devm_extcon_dev_register(&pdev->dev, usb3->extcon);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register extcon\n");
+		return ret;
+	}
+
 	/* for ep0 handling */
 	usb3->ep0_req = __renesas_usb3_ep_alloc_request(GFP_KERNEL);
 	if (!usb3->ep0_req)
@@ -1946,6 +2093,10 @@ static int renesas_usb3_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_add_udc;
 
+	ret = device_create_file(&pdev->dev, &dev_attr_role);
+	if (ret < 0)
+		goto err_dev_create;
+
 	usb3->workaround_for_vbus = priv->workaround_for_vbus;
 
 	pm_runtime_enable(&pdev->dev);
@@ -1955,6 +2106,9 @@ static int renesas_usb3_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_dev_create:
+	usb_del_gadget_udc(&usb3->gadget);
+
 err_add_udc:
 	__renesas_usb3_ep_free_request(usb3->ep0_req);
 

drivers/usb/mtu3/mtu3_dr.c

@@ -223,25 +223,25 @@ static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx)
 		return 0;
 
 	otg_sx->vbus_nb.notifier_call = ssusb_vbus_notifier;
-	ret = extcon_register_notifier(edev, EXTCON_USB,
+	ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB,
 					&otg_sx->vbus_nb);
 	if (ret < 0)
 		dev_err(ssusb->dev, "failed to register notifier for USB\n");
 
 	otg_sx->id_nb.notifier_call = ssusb_id_notifier;
-	ret = extcon_register_notifier(edev, EXTCON_USB_HOST,
+	ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST,
 					&otg_sx->id_nb);
 	if (ret < 0)
 		dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n");
 
 	dev_dbg(ssusb->dev, "EXTCON_USB: %d, EXTCON_USB_HOST: %d\n",
-		extcon_get_cable_state_(edev, EXTCON_USB),
-		extcon_get_cable_state_(edev, EXTCON_USB_HOST));
+		extcon_get_state(edev, EXTCON_USB),
+		extcon_get_state(edev, EXTCON_USB_HOST));
 
 	/* default as host, switch to device mode if needed */
-	if (extcon_get_cable_state_(edev, EXTCON_USB_HOST) == false)
+	if (extcon_get_state(edev, EXTCON_USB_HOST) == false)
 		ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
-	if (extcon_get_cable_state_(edev, EXTCON_USB) == true)
+	if (extcon_get_state(edev, EXTCON_USB) == true)
 		ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
 
 	return 0;
@@ -367,13 +367,6 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
 
 	cancel_delayed_work(&otg_sx->extcon_reg_dwork);
 
-	if (otg_sx->edev) {
-		extcon_unregister_notifier(otg_sx->edev,
-			EXTCON_USB, &otg_sx->vbus_nb);
-		extcon_unregister_notifier(otg_sx->edev,
-			EXTCON_USB_HOST, &otg_sx->id_nb);
-	}
-
 	if (otg_sx->manual_drd_enabled)
 		ssusb_debugfs_exit(ssusb);
 }

drivers/usb/phy/phy-fsl-usb.c

@@ -44,6 +44,13 @@
 
 #include "phy-fsl-usb.h"
 
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s]  " fmt, \
+				 __func__, ## args)
+#else
+#define VDBG(stuff...)	do {} while (0)
+#endif
+
 #define DRIVER_VERSION "Rev. 1.55"
 #define DRIVER_AUTHOR "Jerry Huang/Li Yang"
 #define DRIVER_DESC "Freescale USB OTG Transceiver Driver"

include/linux/usb/otg-fsm.h

@@ -21,21 +21,6 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 
-#undef VERBOSE
-
-#ifdef VERBOSE
-#define VDBG(fmt, args...) pr_debug("[%s]  " fmt , \
-				 __func__, ## args)
-#else
-#define VDBG(stuff...)	do {} while (0)
-#endif
-
-#ifdef VERBOSE
-#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
-#else
-#define MPC_LOC do {} while (0)
-#endif
-
 #define PROTO_UNDEF	(0)
 #define PROTO_HOST	(1)
 #define PROTO_GADGET	(2)

include/uapi/linux/usb/functionfs.h

@@ -158,7 +158,7 @@ struct usb_ext_prop_desc {
  * |-----+-----------------------+------+-------------------------------------|
  * |   0 | bFirstInterfaceNumber | U8   | index of the interface or of the 1st|
  * |     |                       |      | interface in an IAD group           |
- * |   1 | Reserved              | U8   | 0                                   |
+ * |   1 | Reserved              | U8   | 1                                   |
  * |   2 | CompatibleID          | U8[8]| compatible ID string                |
  * |  10 | SubCompatibleID       | U8[8]| subcompatible ID string             |
  * |  18 | Reserved              | U8[6]| 0                                   |