mac802154: monitor: merge into iface implementation

This patch removes the monitor implementation file and put all monitor
stuff into iface file. It's now small enough to put all necessary
handling into iface.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

net/mac802154/Makefile

@@ -1,5 +1,5 @@
 obj-$(CONFIG_MAC802154)	+= mac802154.o
 mac802154-objs		:= main.o rx.o tx.o mac_cmd.o mib.o \
-			   monitor.o iface.o llsec.o util.o
+			   iface.o llsec.o util.o
 
 ccflags-y += -D__CHECK_ENDIAN__

net/mac802154/iface.c

@@ -320,6 +320,12 @@ static const struct net_device_ops mac802154_wpan_ops = {
 	.ndo_set_mac_address	= mac802154_wpan_mac_addr,
 };
 
+static const struct net_device_ops mac802154_monitor_ops = {
+	.ndo_open		= mac802154_slave_open,
+	.ndo_stop		= mac802154_slave_close,
+	.ndo_start_xmit		= ieee802154_monitor_start_xmit,
+};
+
 static void mac802154_wpan_free(struct net_device *dev)
 {
 	struct ieee802154_sub_if_data *sdata = IEEE802154_DEV_TO_SUB_IF(dev);
@@ -373,3 +379,27 @@ void mac802154_wpan_setup(struct net_device *dev)
 
 	mac802154_llsec_init(&sdata->sec);
 }
+
+void mac802154_monitor_setup(struct net_device *dev)
+{
+	struct ieee802154_sub_if_data *sdata;
+
+	dev->addr_len		= 0;
+	dev->hard_header_len	= 0;
+	dev->needed_tailroom	= 2; /* room for FCS */
+	dev->mtu		= IEEE802154_MTU;
+	dev->tx_queue_len	= 10;
+	dev->type		= ARPHRD_IEEE802154_MONITOR;
+	dev->flags		= IFF_NOARP | IFF_BROADCAST;
+	dev->watchdog_timeo	= 0;
+
+	dev->destructor		= free_netdev;
+	dev->netdev_ops		= &mac802154_monitor_ops;
+	dev->ml_priv		= &mac802154_mlme_reduced;
+
+	sdata = IEEE802154_DEV_TO_SUB_IF(dev);
+	sdata->type = IEEE802154_DEV_MONITOR;
+
+	sdata->chan = MAC802154_CHAN_NONE; /* not initialized */
+	sdata->page = 0;
+}

net/mac802154/monitor.c

@@ -1,59 +0,0 @@
-/*
- * Copyright 2007, 2008, 2009 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Written by:
- * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
- * Sergey Lapin <slapin@ossfans.org>
- * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
- * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
- */
-
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/ieee802154.h>
-
-#include <net/mac802154.h>
-#include <net/netlink.h>
-#include <net/cfg802154.h>
-#include <linux/nl802154.h>
-
-#include "ieee802154_i.h"
-
-static const struct net_device_ops mac802154_monitor_ops = {
-	.ndo_open		= mac802154_slave_open,
-	.ndo_stop		= mac802154_slave_close,
-	.ndo_start_xmit		= ieee802154_monitor_start_xmit,
-};
-
-void mac802154_monitor_setup(struct net_device *dev)
-{
-	struct ieee802154_sub_if_data *sdata;
-
-	dev->addr_len		= 0;
-	dev->hard_header_len	= 0;
-	dev->needed_tailroom	= 2; /* room for FCS */
-	dev->mtu		= IEEE802154_MTU;
-	dev->tx_queue_len	= 10;
-	dev->type		= ARPHRD_IEEE802154_MONITOR;
-	dev->flags		= IFF_NOARP | IFF_BROADCAST;
-	dev->watchdog_timeo	= 0;
-
-	dev->destructor		= free_netdev;
-	dev->netdev_ops		= &mac802154_monitor_ops;
-	dev->ml_priv		= &mac802154_mlme_reduced;
-
-	sdata = IEEE802154_DEV_TO_SUB_IF(dev);
-	sdata->type = IEEE802154_DEV_MONITOR;
-
-	sdata->chan = MAC802154_CHAN_NONE; /* not initialized */
-	sdata->page = 0;
-}