Merge branch 'for-3.15/hid-core-ll-transport-cleanup' into for-3.15/sony

Documentation/hid/hid-transport.txt

@@ -283,7 +283,8 @@ The available HID callbacks are:
                        int reqtype)
    Same as ->request() but provides the report as raw buffer. This request shall
    be synchronous. A transport driver must not use ->wait() to complete such
-   requests.
+   requests. This request is mandatory and hid core will reject the device if
+   it is missing.
 
  - int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
    Send raw output report via intr channel. Used by some HID device drivers

drivers/hid/Kconfig

@@ -175,6 +175,15 @@ config HID_PRODIKEYS
 	  multimedia keyboard, but will lack support for the musical keyboard
 	  and some additional multimedia keys.
 
+config HID_CP2112
+	tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
+	depends on USB_HID && I2C && GPIOLIB
+	---help---
+	Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
+	This is a HID device driver which registers as an i2c adapter
+	and gpiochip to expose these functions of the CP2112. The
+	customizable USB descriptor fields are exposed as sysfs attributes.
+
 config HID_CYPRESS
 	tristate "Cypress mouse and barcode readers" if EXPERT
 	depends on HID

drivers/hid/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_HID_AUREAL)        += hid-aureal.o
 obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
+obj-$(CONFIG_HID_CP2112)	+= hid-cp2112.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
 obj-$(CONFIG_HID_DRAGONRISE)	+= hid-dr.o
 obj-$(CONFIG_HID_EMS_FF)	+= hid-emsff.o

drivers/hid/hid-core.c

@@ -1248,6 +1248,11 @@ void hid_output_report(struct hid_report *report, __u8 *data)
 }
 EXPORT_SYMBOL_GPL(hid_output_report);
 
+static int hid_report_len(struct hid_report *report)
+{
+	return ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7;
+}
+
 /*
  * Allocator for buffer that is going to be passed to hid_output_report()
  */
@@ -1258,7 +1263,7 @@ u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags)
 	 * of implement() working on 8 byte chunks
 	 */
 
-	int len = ((report->size - 1) >> 3) + 1 + (report->id > 0) + 7;
+	int len = hid_report_len(report);
 
 	return kmalloc(len, flags);
 }
@@ -1314,6 +1319,41 @@ static struct hid_report *hid_get_report(struct hid_report_enum *report_enum,
 	return report;
 }
 
+/*
+ * Implement a generic .request() callback, using .raw_request()
+ * DO NOT USE in hid drivers directly, but through hid_hw_request instead.
+ */
+void __hid_request(struct hid_device *hid, struct hid_report *report,
+		int reqtype)
+{
+	char *buf;
+	int ret;
+	int len;
+
+	buf = hid_alloc_report_buf(report, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	len = hid_report_len(report);
+
+	if (reqtype == HID_REQ_SET_REPORT)
+		hid_output_report(report, buf);
+
+	ret = hid->ll_driver->raw_request(hid, report->id, buf, len,
+					  report->type, reqtype);
+	if (ret < 0) {
+		dbg_hid("unable to complete request: %d\n", ret);
+		goto out;
+	}
+
+	if (reqtype == HID_REQ_GET_REPORT)
+		hid_input_report(hid, report->type, buf, ret, 0);
+
+out:
+	kfree(buf);
+}
+EXPORT_SYMBOL_GPL(__hid_request);
+
 int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
 		int interrupt)
 {
@@ -1692,6 +1732,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
@@ -2428,6 +2469,14 @@ int hid_add_device(struct hid_device *hdev)
 	if (hid_ignore(hdev))
 		return -ENODEV;
 
+	/*
+	 * Check for the mandatory transport channel.
+	 */
+	 if (!hdev->ll_driver->raw_request) {
+		hid_err(hdev, "transport driver missing .raw_request()\n");
+		return -EINVAL;
+	 }
+
 	/*
 	 * Read the device report descriptor once and use as template
 	 * for the driver-specific modifications.

drivers/hid/hid-cp2112.c

@@ -0,0 +1,1073 @@
+/*
+ * hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
+ * Copyright (c) 2013,2014 Uplogix, Inc.
+ * David Barksdale <dbarksdale@uplogix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+/*
+ * The Silicon Labs CP2112 chip is a USB HID device which provides an
+ * SMBus controller for talking to slave devices and 8 GPIO pins. The
+ * host communicates with the CP2112 via raw HID reports.
+ *
+ * Data Sheet:
+ *   http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
+ * Programming Interface Specification:
+ *   http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
+ */
+
+#include <linux/gpio.h>
+#include <linux/hid.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/nls.h>
+#include <linux/usb/ch9.h>
+#include "hid-ids.h"
+
+enum {
+	CP2112_GPIO_CONFIG		= 0x02,
+	CP2112_GPIO_GET			= 0x03,
+	CP2112_GPIO_SET			= 0x04,
+	CP2112_GET_VERSION_INFO		= 0x05,
+	CP2112_SMBUS_CONFIG		= 0x06,
+	CP2112_DATA_READ_REQUEST	= 0x10,
+	CP2112_DATA_WRITE_READ_REQUEST	= 0x11,
+	CP2112_DATA_READ_FORCE_SEND	= 0x12,
+	CP2112_DATA_READ_RESPONSE	= 0x13,
+	CP2112_DATA_WRITE_REQUEST	= 0x14,
+	CP2112_TRANSFER_STATUS_REQUEST	= 0x15,
+	CP2112_TRANSFER_STATUS_RESPONSE	= 0x16,
+	CP2112_CANCEL_TRANSFER		= 0x17,
+	CP2112_LOCK_BYTE		= 0x20,
+	CP2112_USB_CONFIG		= 0x21,
+	CP2112_MANUFACTURER_STRING	= 0x22,
+	CP2112_PRODUCT_STRING		= 0x23,
+	CP2112_SERIAL_STRING		= 0x24,
+};
+
+enum {
+	STATUS0_IDLE		= 0x00,
+	STATUS0_BUSY		= 0x01,
+	STATUS0_COMPLETE	= 0x02,
+	STATUS0_ERROR		= 0x03,
+};
+
+enum {
+	STATUS1_TIMEOUT_NACK		= 0x00,
+	STATUS1_TIMEOUT_BUS		= 0x01,
+	STATUS1_ARBITRATION_LOST	= 0x02,
+	STATUS1_READ_INCOMPLETE		= 0x03,
+	STATUS1_WRITE_INCOMPLETE	= 0x04,
+	STATUS1_SUCCESS			= 0x05,
+};
+
+struct cp2112_smbus_config_report {
+	u8 report;		/* CP2112_SMBUS_CONFIG */
+	__be32 clock_speed;	/* Hz */
+	u8 device_address;	/* Stored in the upper 7 bits */
+	u8 auto_send_read;	/* 1 = enabled, 0 = disabled */
+	__be16 write_timeout;	/* ms, 0 = no timeout */
+	__be16 read_timeout;	/* ms, 0 = no timeout */
+	u8 scl_low_timeout;	/* 1 = enabled, 0 = disabled */
+	__be16 retry_time;	/* # of retries, 0 = no limit */
+} __packed;
+
+struct cp2112_usb_config_report {
+	u8 report;	/* CP2112_USB_CONFIG */
+	__le16 vid;	/* Vendor ID */
+	__le16 pid;	/* Product ID */
+	u8 max_power;	/* Power requested in 2mA units */
+	u8 power_mode;	/* 0x00 = bus powered
+			   0x01 = self powered & regulator off
+			   0x02 = self powered & regulator on */
+	u8 release_major;
+	u8 release_minor;
+	u8 mask;	/* What fields to program */
+} __packed;
+
+struct cp2112_read_req_report {
+	u8 report;	/* CP2112_DATA_READ_REQUEST */
+	u8 slave_address;
+	__be16 length;
+} __packed;
+
+struct cp2112_write_read_req_report {
+	u8 report;	/* CP2112_DATA_WRITE_READ_REQUEST */
+	u8 slave_address;
+	__be16 length;
+	u8 target_address_length;
+	u8 target_address[16];
+} __packed;
+
+struct cp2112_write_req_report {
+	u8 report;	/* CP2112_DATA_WRITE_REQUEST */
+	u8 slave_address;
+	u8 length;
+	u8 data[61];
+} __packed;
+
+struct cp2112_force_read_report {
+	u8 report;	/* CP2112_DATA_READ_FORCE_SEND */
+	__be16 length;
+} __packed;
+
+struct cp2112_xfer_status_report {
+	u8 report;	/* CP2112_TRANSFER_STATUS_RESPONSE */
+	u8 status0;	/* STATUS0_* */
+	u8 status1;	/* STATUS1_* */
+	__be16 retries;
+	__be16 length;
+} __packed;
+
+struct cp2112_string_report {
+	u8 dummy;		/* force .string to be aligned */
+	u8 report;		/* CP2112_*_STRING */
+	u8 length;		/* length in bytes of everyting after .report */
+	u8 type;		/* USB_DT_STRING */
+	wchar_t string[30];	/* UTF16_LITTLE_ENDIAN string */
+} __packed;
+
+/* Number of times to request transfer status before giving up waiting for a
+   transfer to complete. This may need to be changed if SMBUS clock, retries,
+   or read/write/scl_low timeout settings are changed. */
+static const int XFER_STATUS_RETRIES = 10;
+
+/* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or
+   CP2112_TRANSFER_STATUS_RESPONSE. */
+static const int RESPONSE_TIMEOUT = 50;
+
+static const struct hid_device_id cp2112_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, cp2112_devices);
+
+struct cp2112_device {
+	struct i2c_adapter adap;
+	struct hid_device *hdev;
+	wait_queue_head_t wait;
+	u8 read_data[61];
+	u8 read_length;
+	int xfer_status;
+	atomic_t read_avail;
+	atomic_t xfer_avail;
+	struct gpio_chip gc;
+};
+
+static int gpio_push_pull = 0xFF;
+module_param(gpio_push_pull, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(gpio_push_pull, "GPIO push-pull configuration bitmask");
+
+static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+						 gc);
+	struct hid_device *hdev = dev->hdev;
+	u8 buf[5];
+	int ret;
+
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
+				       sizeof(buf), HID_FEATURE_REPORT,
+				       HID_REQ_GET_REPORT);
+	if (ret != sizeof(buf)) {
+		hid_err(hdev, "error requesting GPIO config: %d\n", ret);
+		return ret;
+	}
+
+	buf[1] &= ~(1 << offset);
+	buf[2] = gpio_push_pull;
+
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret < 0) {
+		hid_err(hdev, "error setting GPIO config: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+						 gc);
+	struct hid_device *hdev = dev->hdev;
+	u8 buf[3];
+	int ret;
+
+	buf[0] = CP2112_GPIO_SET;
+	buf[1] = value ? 0xff : 0;
+	buf[2] = 1 << offset;
+
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf, sizeof(buf),
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret < 0)
+		hid_err(hdev, "error setting GPIO values: %d\n", ret);
+}
+
+static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+						 gc);
+	struct hid_device *hdev = dev->hdev;
+	u8 buf[2];
+	int ret;
+
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf, sizeof(buf),
+				       HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+	if (ret != sizeof(buf)) {
+		hid_err(hdev, "error requesting GPIO values: %d\n", ret);
+		return ret;
+	}
+
+	return (buf[1] >> offset) & 1;
+}
+
+static int cp2112_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct cp2112_device *dev = container_of(chip, struct cp2112_device,
+						 gc);
+	struct hid_device *hdev = dev->hdev;
+	u8 buf[5];
+	int ret;
+
+	cp2112_gpio_set(chip, offset, value);
+
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
+				       sizeof(buf), HID_FEATURE_REPORT,
+				       HID_REQ_GET_REPORT);
+	if (ret != sizeof(buf)) {
+		hid_err(hdev, "error requesting GPIO config: %d\n", ret);
+		return ret;
+	}
+
+	buf[1] |= 1 << offset;
+	buf[2] = gpio_push_pull;
+
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret < 0) {
+		hid_err(hdev, "error setting GPIO config: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number,
+			  u8 *data, size_t count, unsigned char report_type)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = hid_hw_raw_request(hdev, report_number, buf, count,
+				       report_type, HID_REQ_GET_REPORT);
+	memcpy(data, buf, count);
+	kfree(buf);
+	return ret;
+}
+
+static int cp2112_hid_output(struct hid_device *hdev, u8 *data, size_t count,
+			     unsigned char report_type)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kmemdup(data, count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (report_type == HID_OUTPUT_REPORT)
+		ret = hid_hw_output_report(hdev, buf, count);
+	else
+		ret = hid_hw_raw_request(hdev, buf[0], buf, count, report_type,
+				HID_REQ_SET_REPORT);
+
+	kfree(buf);
+	return ret;
+}
+
+static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail)
+{
+	int ret = 0;
+
+	/* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a
+	 * CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to
+	 * come in cp2112_raw_event or timeout. There will only be one of these
+	 * in flight at any one time. The timeout is extremely large and is a
+	 * last resort if the CP2112 has died. If we do timeout we don't expect
+	 * to receive the response which would cause data races, it's not like
+	 * we can do anything about it anyway.
+	 */
+	ret = wait_event_interruptible_timeout(dev->wait,
+		atomic_read(avail), msecs_to_jiffies(RESPONSE_TIMEOUT));
+	if (-ERESTARTSYS == ret)
+		return ret;
+	if (!ret)
+		return -ETIMEDOUT;
+
+	atomic_set(avail, 0);
+	return 0;
+}
+
+static int cp2112_xfer_status(struct cp2112_device *dev)
+{
+	struct hid_device *hdev = dev->hdev;
+	u8 buf[2];
+	int ret;
+
+	buf[0] = CP2112_TRANSFER_STATUS_REQUEST;
+	buf[1] = 0x01;
+	atomic_set(&dev->xfer_avail, 0);
+
+	ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
+	if (ret < 0) {
+		hid_warn(hdev, "Error requesting status: %d\n", ret);
+		return ret;
+	}
+
+	ret = cp2112_wait(dev, &dev->xfer_avail);
+	if (ret)
+		return ret;
+
+	return dev->xfer_status;
+}
+
+static int cp2112_read(struct cp2112_device *dev, u8 *data, size_t size)
+{
+	struct hid_device *hdev = dev->hdev;
+	struct cp2112_force_read_report report;
+	int ret;
+
+	report.report = CP2112_DATA_READ_FORCE_SEND;
+	report.length = cpu_to_be16(size);
+
+	atomic_set(&dev->read_avail, 0);
+
+	ret = cp2112_hid_output(hdev, &report.report, sizeof(report),
+				HID_OUTPUT_REPORT);
+	if (ret < 0) {
+		hid_warn(hdev, "Error requesting data: %d\n", ret);
+		return ret;
+	}
+
+	ret = cp2112_wait(dev, &dev->read_avail);
+	if (ret)
+		return ret;
+
+	hid_dbg(hdev, "read %d of %zd bytes requested\n",
+		dev->read_length, size);
+
+	if (size > dev->read_length)
+		size = dev->read_length;
+
+	memcpy(data, dev->read_data, size);
+	return dev->read_length;
+}
+
+static int cp2112_read_req(void *buf, u8 slave_address, u16 length)
+{
+	struct cp2112_read_req_report *report = buf;
+
+	if (length < 1 || length > 512)
+		return -EINVAL;
+
+	report->report = CP2112_DATA_READ_REQUEST;
+	report->slave_address = slave_address << 1;
+	report->length = cpu_to_be16(length);
+	return sizeof(*report);
+}
+
+static int cp2112_write_read_req(void *buf, u8 slave_address, u16 length,
+				 u8 command, u8 *data, u8 data_length)
+{
+	struct cp2112_write_read_req_report *report = buf;
+
+	if (length < 1 || length > 512
+	    || data_length > sizeof(report->target_address) - 1)
+		return -EINVAL;
+
+	report->report = CP2112_DATA_WRITE_READ_REQUEST;
+	report->slave_address = slave_address << 1;
+	report->length = cpu_to_be16(length);
+	report->target_address_length = data_length + 1;
+	report->target_address[0] = command;
+	memcpy(&report->target_address[1], data, data_length);
+	return data_length + 6;
+}
+
+static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data,
+			    u8 data_length)
+{
+	struct cp2112_write_req_report *report = buf;
+
+	if (data_length > sizeof(report->data) - 1)
+		return -EINVAL;
+
+	report->report = CP2112_DATA_WRITE_REQUEST;
+	report->slave_address = slave_address << 1;
+	report->length = data_length + 1;
+	report->data[0] = command;
+	memcpy(&report->data[1], data, data_length);
+	return data_length + 4;
+}
+
+static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data *data)
+{
+	struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
+	struct hid_device *hdev = dev->hdev;
+	u8 buf[64];
+	__be16 word;
+	ssize_t count;
+	size_t read_length = 0;
+	unsigned int retries;
+	int ret;
+
+	hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
+		read_write == I2C_SMBUS_WRITE ? "write" : "read",
+		addr, flags, command, size);
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		read_length = 1;
+
+		if (I2C_SMBUS_READ == read_write)
+			count = cp2112_read_req(buf, addr, read_length);
+		else
+			count = cp2112_write_req(buf, addr, data->byte, NULL,
+						 0);
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		read_length = 1;
+
+		if (I2C_SMBUS_READ == read_write)
+			count = cp2112_write_read_req(buf, addr, read_length,
+						      command, NULL, 0);
+		else
+			count = cp2112_write_req(buf, addr, command,
+						 &data->byte, 1);
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		read_length = 2;
+		word = cpu_to_be16(data->word);
+
+		if (I2C_SMBUS_READ == read_write)
+			count = cp2112_write_read_req(buf, addr, read_length,
+						      command, NULL, 0);
+		else
+			count = cp2112_write_req(buf, addr, command,
+						 (u8 *)&word, 2);
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		size = I2C_SMBUS_WORD_DATA;
+		read_write = I2C_SMBUS_READ;
+		read_length = 2;
+		word = cpu_to_be16(data->word);
+
+		count = cp2112_write_read_req(buf, addr, read_length, command,
+					      (u8 *)&word, 2);
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		size = I2C_SMBUS_BLOCK_DATA;
+		/* fallthrough */
+	case I2C_SMBUS_BLOCK_DATA:
+		if (I2C_SMBUS_READ == read_write) {
+			count = cp2112_write_read_req(buf, addr,
+						      I2C_SMBUS_BLOCK_MAX,
+						      command, NULL, 0);
+		} else {
+			count = cp2112_write_req(buf, addr, command,
+						 data->block,
+						 data->block[0] + 1);
+		}
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		size = I2C_SMBUS_BLOCK_DATA;
+		read_write = I2C_SMBUS_READ;
+
+		count = cp2112_write_read_req(buf, addr, I2C_SMBUS_BLOCK_MAX,
+					      command, data->block,
+					      data->block[0] + 1);
+		break;
+	default:
+		hid_warn(hdev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	if (count < 0)
+		return count;
+
+	ret = hid_hw_power(hdev, PM_HINT_FULLON);
+	if (ret < 0) {
+		hid_err(hdev, "power management error: %d\n", ret);
+		return ret;
+	}
+
+	ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
+	if (ret < 0) {
+		hid_warn(hdev, "Error starting transaction: %d\n", ret);
+		goto power_normal;
+	}
+
+	for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
+		ret = cp2112_xfer_status(dev);
+		if (-EBUSY == ret)
+			continue;
+		if (ret < 0)
+			goto power_normal;
+		break;
+	}
+
+	if (XFER_STATUS_RETRIES <= retries) {
+		hid_warn(hdev, "Transfer timed out, cancelling.\n");
+		buf[0] = CP2112_CANCEL_TRANSFER;
+		buf[1] = 0x01;
+
+		ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
+		if (ret < 0)
+			hid_warn(hdev, "Error cancelling transaction: %d\n",
+				 ret);
+
+		ret = -ETIMEDOUT;
+		goto power_normal;
+	}
+
+	if (I2C_SMBUS_WRITE == read_write) {
+		ret = 0;
+		goto power_normal;
+	}
+
+	if (I2C_SMBUS_BLOCK_DATA == size)
+		read_length = ret;
+
+	ret = cp2112_read(dev, buf, read_length);
+	if (ret < 0)
+		goto power_normal;
+	if (ret != read_length) {
+		hid_warn(hdev, "short read: %d < %zd\n", ret, read_length);
+		ret = -EIO;
+		goto power_normal;
+	}
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		data->byte = buf[0];
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		data->word = be16_to_cpup((__be16 *)buf);
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_length > I2C_SMBUS_BLOCK_MAX) {
+			ret = -EPROTO;
+			goto power_normal;
+		}
+
+		memcpy(data->block, buf, read_length);
+		break;
+	}
+
+	ret = 0;
+power_normal:
+	hid_hw_power(hdev, PM_HINT_NORMAL);
+	hid_dbg(hdev, "transfer finished: %d\n", ret);
+	return ret;
+}
+
+static u32 cp2112_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_BLOCK_DATA |
+		I2C_FUNC_SMBUS_I2C_BLOCK |
+		I2C_FUNC_SMBUS_PROC_CALL |
+		I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= cp2112_xfer,
+	.functionality	= cp2112_functionality,
+};
+
+static int cp2112_get_usb_config(struct hid_device *hdev,
+				 struct cp2112_usb_config_report *cfg)
+{
+	int ret;
+
+	ret = cp2112_hid_get(hdev, CP2112_USB_CONFIG, (u8 *)cfg, sizeof(*cfg),
+			     HID_FEATURE_REPORT);
+	if (ret != sizeof(*cfg)) {
+		hid_err(hdev, "error reading usb config: %d\n", ret);
+		if (ret < 0)
+			return ret;
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cp2112_set_usb_config(struct hid_device *hdev,
+				 struct cp2112_usb_config_report *cfg)
+{
+	int ret;
+
+	BUG_ON(cfg->report != CP2112_USB_CONFIG);
+
+	ret = cp2112_hid_output(hdev, (u8 *)cfg, sizeof(*cfg),
+				HID_FEATURE_REPORT);
+	if (ret != sizeof(*cfg)) {
+		hid_err(hdev, "error writing usb config: %d\n", ret);
+		if (ret < 0)
+			return ret;
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void chmod_sysfs_attrs(struct hid_device *hdev);
+
+#define CP2112_CONFIG_ATTR(name, store, format, ...) \
+static ssize_t name##_store(struct device *kdev, \
+			    struct device_attribute *attr, const char *buf, \
+			    size_t count) \
+{ \
+	struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
+	struct cp2112_usb_config_report cfg; \
+	int ret = cp2112_get_usb_config(hdev, &cfg); \
+	if (ret) \
+		return ret; \
+	store; \
+	ret = cp2112_set_usb_config(hdev, &cfg); \
+	if (ret) \
+		return ret; \
+	chmod_sysfs_attrs(hdev); \
+	return count; \
+} \
+static ssize_t name##_show(struct device *kdev, \
+			   struct device_attribute *attr, char *buf) \
+{ \
+	struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \
+	struct cp2112_usb_config_report cfg; \
+	int ret = cp2112_get_usb_config(hdev, &cfg); \
+	if (ret) \
+		return ret; \
+	return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \
+} \
+static DEVICE_ATTR_RW(name);
+
+CP2112_CONFIG_ATTR(vendor_id, ({
+	u16 vid;
+
+	if (sscanf(buf, "%hi", &vid) != 1)
+		return -EINVAL;
+
+	cfg.vid = cpu_to_le16(vid);
+	cfg.mask = 0x01;
+}), "0x%04x\n", le16_to_cpu(cfg.vid));
+
+CP2112_CONFIG_ATTR(product_id, ({
+	u16 pid;
+
+	if (sscanf(buf, "%hi", &pid) != 1)
+		return -EINVAL;
+
+	cfg.pid = cpu_to_le16(pid);
+	cfg.mask = 0x02;
+}), "0x%04x\n", le16_to_cpu(cfg.pid));
+
+CP2112_CONFIG_ATTR(max_power, ({
+	int mA;
+
+	if (sscanf(buf, "%i", &mA) != 1)
+		return -EINVAL;
+
+	cfg.max_power = (mA + 1) / 2;
+	cfg.mask = 0x04;
+}), "%u mA\n", cfg.max_power * 2);
+
+CP2112_CONFIG_ATTR(power_mode, ({
+	if (sscanf(buf, "%hhi", &cfg.power_mode) != 1)
+		return -EINVAL;
+
+	cfg.mask = 0x08;
+}), "%u\n", cfg.power_mode);
+
+CP2112_CONFIG_ATTR(release_version, ({
+	if (sscanf(buf, "%hhi.%hhi", &cfg.release_major, &cfg.release_minor)
+	    != 2)
+		return -EINVAL;
+
+	cfg.mask = 0x10;
+}), "%u.%u\n", cfg.release_major, cfg.release_minor);
+
+#undef CP2112_CONFIG_ATTR
+
+struct cp2112_pstring_attribute {
+	struct device_attribute attr;
+	unsigned char report;
+};
+
+static ssize_t pstr_store(struct device *kdev,
+			  struct device_attribute *kattr, const char *buf,
+			  size_t count)
+{
+	struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
+	struct cp2112_pstring_attribute *attr =
+		container_of(kattr, struct cp2112_pstring_attribute, attr);
+	struct cp2112_string_report report;
+	int ret;
+
+	memset(&report, 0, sizeof(report));
+
+	ret = utf8s_to_utf16s(buf, count, UTF16_LITTLE_ENDIAN,
+			      report.string, ARRAY_SIZE(report.string));
+	report.report = attr->report;
+	report.length = ret * sizeof(report.string[0]) + 2;
+	report.type = USB_DT_STRING;
+
+	ret = cp2112_hid_output(hdev, &report.report, report.length + 1,
+				HID_FEATURE_REPORT);
+	if (ret != report.length + 1) {
+		hid_err(hdev, "error writing %s string: %d\n", kattr->attr.name,
+			ret);
+		if (ret < 0)
+			return ret;
+		return -EIO;
+	}
+
+	chmod_sysfs_attrs(hdev);
+	return count;
+}
+
+static ssize_t pstr_show(struct device *kdev,
+			 struct device_attribute *kattr, char *buf)
+{
+	struct hid_device *hdev = container_of(kdev, struct hid_device, dev);
+	struct cp2112_pstring_attribute *attr =
+		container_of(kattr, struct cp2112_pstring_attribute, attr);
+	struct cp2112_string_report report;
+	u8 length;
+	int ret;
+
+	ret = cp2112_hid_get(hdev, attr->report, &report.report,
+			     sizeof(report) - 1, HID_FEATURE_REPORT);
+	if (ret < 3) {
+		hid_err(hdev, "error reading %s string: %d\n", kattr->attr.name,
+			ret);
+		if (ret < 0)
+			return ret;
+		return -EIO;
+	}
+
+	if (report.length < 2) {
+		hid_err(hdev, "invalid %s string length: %d\n",
+			kattr->attr.name, report.length);
+		return -EIO;
+	}
+
+	length = report.length > ret - 1 ? ret - 1 : report.length;
+	length = (length - 2) / sizeof(report.string[0]);
+	ret = utf16s_to_utf8s(report.string, length, UTF16_LITTLE_ENDIAN, buf,
+			      PAGE_SIZE - 1);
+	buf[ret++] = '\n';
+	return ret;
+}
+
+#define CP2112_PSTR_ATTR(name, _report) \
+static struct cp2112_pstring_attribute dev_attr_##name = { \
+	.attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \
+	.report = _report, \
+};
+
+CP2112_PSTR_ATTR(manufacturer,	CP2112_MANUFACTURER_STRING);
+CP2112_PSTR_ATTR(product,	CP2112_PRODUCT_STRING);
+CP2112_PSTR_ATTR(serial,	CP2112_SERIAL_STRING);
+
+#undef CP2112_PSTR_ATTR
+
+static const struct attribute_group cp2112_attr_group = {
+	.attrs = (struct attribute *[]){
+		&dev_attr_vendor_id.attr,
+		&dev_attr_product_id.attr,
+		&dev_attr_max_power.attr,
+		&dev_attr_power_mode.attr,
+		&dev_attr_release_version.attr,
+		&dev_attr_manufacturer.attr.attr,
+		&dev_attr_product.attr.attr,
+		&dev_attr_serial.attr.attr,
+		NULL
+	}
+};
+
+/* Chmoding our sysfs attributes is simply a way to expose which fields in the
+ * PROM have already been programmed. We do not depend on this preventing
+ * writing to these attributes since the CP2112 will simply ignore writes to
+ * already-programmed fields. This is why there is no sense in fixing this
+ * racy behaviour.
+ */
+static void chmod_sysfs_attrs(struct hid_device *hdev)
+{
+	struct attribute **attr;
+	u8 buf[2];
+	int ret;
+
+	ret = cp2112_hid_get(hdev, CP2112_LOCK_BYTE, buf, sizeof(buf),
+			     HID_FEATURE_REPORT);
+	if (ret != sizeof(buf)) {
+		hid_err(hdev, "error reading lock byte: %d\n", ret);
+		return;
+	}
+
+	for (attr = cp2112_attr_group.attrs; *attr; ++attr) {
+		umode_t mode = (buf[1] & 1) ? S_IWUSR | S_IRUGO : S_IRUGO;
+		ret = sysfs_chmod_file(&hdev->dev.kobj, *attr, mode);
+		if (ret < 0)
+			hid_err(hdev, "error chmoding sysfs file %s\n",
+				(*attr)->name);
+		buf[1] >>= 1;
+	}
+}
+
+static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	struct cp2112_device *dev;
+	u8 buf[3];
+	struct cp2112_smbus_config_report config;
+	int ret;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	ret = hid_hw_open(hdev);
+	if (ret) {
+		hid_err(hdev, "hw open failed\n");
+		goto err_hid_stop;
+	}
+
+	ret = hid_hw_power(hdev, PM_HINT_FULLON);
+	if (ret < 0) {
+		hid_err(hdev, "power management error: %d\n", ret);
+		goto err_hid_close;
+	}
+
+	ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf),
+			     HID_FEATURE_REPORT);
+	if (ret != sizeof(buf)) {
+		hid_err(hdev, "error requesting version\n");
+		if (ret >= 0)
+			ret = -EIO;
+		goto err_power_normal;
+	}
+
+	hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n",
+		 buf[1], buf[2]);
+
+	ret = cp2112_hid_get(hdev, CP2112_SMBUS_CONFIG, (u8 *)&config,
+			     sizeof(config), HID_FEATURE_REPORT);
+	if (ret != sizeof(config)) {
+		hid_err(hdev, "error requesting SMBus config\n");
+		if (ret >= 0)
+			ret = -EIO;
+		goto err_power_normal;
+	}
+
+	config.retry_time = cpu_to_be16(1);
+
+	ret = cp2112_hid_output(hdev, (u8 *)&config, sizeof(config),
+				HID_FEATURE_REPORT);
+	if (ret != sizeof(config)) {
+		hid_err(hdev, "error setting SMBus config\n");
+		if (ret >= 0)
+			ret = -EIO;
+		goto err_power_normal;
+	}
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto err_power_normal;
+	}
+
+	hid_set_drvdata(hdev, (void *)dev);
+	dev->hdev		= hdev;
+	dev->adap.owner		= THIS_MODULE;
+	dev->adap.class		= I2C_CLASS_HWMON;
+	dev->adap.algo		= &smbus_algorithm;
+	dev->adap.algo_data	= dev;
+	dev->adap.dev.parent	= &hdev->dev;
+	snprintf(dev->adap.name, sizeof(dev->adap.name),
+		 "CP2112 SMBus Bridge on hiddev%d", hdev->minor);
+	init_waitqueue_head(&dev->wait);
+
+	hid_device_io_start(hdev);
+	ret = i2c_add_adapter(&dev->adap);
+	hid_device_io_stop(hdev);
+
+	if (ret) {
+		hid_err(hdev, "error registering i2c adapter\n");
+		goto err_free_dev;
+	}
+
+	hid_dbg(hdev, "adapter registered\n");
+
+	dev->gc.label			= "cp2112_gpio";
+	dev->gc.direction_input		= cp2112_gpio_direction_input;
+	dev->gc.direction_output	= cp2112_gpio_direction_output;
+	dev->gc.set			= cp2112_gpio_set;
+	dev->gc.get			= cp2112_gpio_get;
+	dev->gc.base			= -1;
+	dev->gc.ngpio			= 8;
+	dev->gc.can_sleep		= 1;
+	dev->gc.dev			= &hdev->dev;
+
+	ret = gpiochip_add(&dev->gc);
+	if (ret < 0) {
+		hid_err(hdev, "error registering gpio chip\n");
+		goto err_free_i2c;
+	}
+
+	ret = sysfs_create_group(&hdev->dev.kobj, &cp2112_attr_group);
+	if (ret < 0) {
+		hid_err(hdev, "error creating sysfs attrs\n");
+		goto err_gpiochip_remove;
+	}
+
+	chmod_sysfs_attrs(hdev);
+	hid_hw_power(hdev, PM_HINT_NORMAL);
+
+	return ret;
+
+err_gpiochip_remove:
+	if (gpiochip_remove(&dev->gc) < 0)
+		hid_err(hdev, "error removing gpio chip\n");
+err_free_i2c:
+	i2c_del_adapter(&dev->adap);
+err_free_dev:
+	kfree(dev);
+err_power_normal:
+	hid_hw_power(hdev, PM_HINT_NORMAL);
+err_hid_close:
+	hid_hw_close(hdev);
+err_hid_stop:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
+static void cp2112_remove(struct hid_device *hdev)
+{
+	struct cp2112_device *dev = hid_get_drvdata(hdev);
+
+	sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
+	if (gpiochip_remove(&dev->gc))
+		hid_err(hdev, "unable to remove gpio chip\n");
+	i2c_del_adapter(&dev->adap);
+	/* i2c_del_adapter has finished removing all i2c devices from our
+	 * adapter. Well behaved devices should no longer call our cp2112_xfer
+	 * and should have waited for any pending calls to finish. It has also
+	 * waited for device_unregister(&adap->dev) to complete. Therefore we
+	 * can safely free our struct cp2112_device.
+	 */
+	hid_hw_close(hdev);
+	hid_hw_stop(hdev);
+	kfree(dev);
+}
+
+static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
+			    u8 *data, int size)
+{
+	struct cp2112_device *dev = hid_get_drvdata(hdev);
+	struct cp2112_xfer_status_report *xfer = (void *)data;
+
+	switch (data[0]) {
+	case CP2112_TRANSFER_STATUS_RESPONSE:
+		hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n",
+			xfer->status0, xfer->status1,
+			be16_to_cpu(xfer->retries), be16_to_cpu(xfer->length));
+
+		switch (xfer->status0) {
+		case STATUS0_IDLE:
+			dev->xfer_status = -EAGAIN;
+			break;
+		case STATUS0_BUSY:
+			dev->xfer_status = -EBUSY;
+			break;
+		case STATUS0_COMPLETE:
+			dev->xfer_status = be16_to_cpu(xfer->length);
+			break;
+		case STATUS0_ERROR:
+			switch (xfer->status1) {
+			case STATUS1_TIMEOUT_NACK:
+			case STATUS1_TIMEOUT_BUS:
+				dev->xfer_status = -ETIMEDOUT;
+				break;
+			default:
+				dev->xfer_status = -EIO;
+				break;
+			}
+			break;
+		default:
+			dev->xfer_status = -EINVAL;
+			break;
+		}
+
+		atomic_set(&dev->xfer_avail, 1);
+		break;
+	case CP2112_DATA_READ_RESPONSE:
+		hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]);
+
+		dev->read_length = data[2];
+		if (dev->read_length > sizeof(dev->read_data))
+			dev->read_length = sizeof(dev->read_data);
+
+		memcpy(dev->read_data, &data[3], dev->read_length);
+		atomic_set(&dev->read_avail, 1);
+		break;
+	default:
+		hid_err(hdev, "unknown report\n");
+
+		return 0;
+	}
+
+	wake_up_interruptible(&dev->wait);
+	return 1;
+}
+
+static struct hid_driver cp2112_driver = {
+	.name		= "cp2112",
+	.id_table	= cp2112_devices,
+	.probe		= cp2112_probe,
+	.remove		= cp2112_remove,
+	.raw_event	= cp2112_raw_event,
+};
+
+module_hid_driver(cp2112_driver);
+MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
+MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
+MODULE_LICENSE("GPL");
+

drivers/hid/hid-hyperv.c

@@ -455,12 +455,22 @@ static void mousevsc_hid_stop(struct hid_device *hid)
 {
 }
 
+static int mousevsc_hid_raw_request(struct hid_device *hid,
+				    unsigned char report_num,
+				    __u8 *buf, size_t len,
+				    unsigned char rtype,
+				    int reqtype)
+{
+	return 0;
+}
+
 static struct hid_ll_driver mousevsc_ll_driver = {
 	.parse = mousevsc_hid_parse,
 	.open = mousevsc_hid_open,
 	.close = mousevsc_hid_close,
 	.start = mousevsc_hid_start,
 	.stop = mousevsc_hid_stop,
+	.raw_request = mousevsc_hid_raw_request,
 };
 
 static struct hid_driver mousevsc_hid_driver;

drivers/hid/hid-ids.h

@@ -240,6 +240,7 @@
 
 #define USB_VENDOR_ID_CYGNAL		0x10c4
 #define USB_DEVICE_ID_CYGNAL_RADIO_SI470X	0x818a
+#define USB_DEVICE_ID_CYGNAL_CP2112	0xea90
 
 #define USB_VENDOR_ID_CYPRESS		0x04b4
 #define USB_DEVICE_ID_CYPRESS_MOUSE	0x0001

drivers/hid/hid-input.c

@@ -1150,7 +1150,7 @@ static void hidinput_led_worker(struct work_struct *work)
 					      led_work);
 	struct hid_field *field;
 	struct hid_report *report;
-	int len;
+	int len, ret;
 	__u8 *buf;
 
 	field = hidinput_get_led_field(hid);
@@ -1184,7 +1184,10 @@ static void hidinput_led_worker(struct work_struct *work)
 
 	hid_output_report(report, buf);
 	/* synchronous output report */
-	hid_output_raw_report(hid, buf, len, HID_OUTPUT_REPORT);
+	ret = hid_hw_output_report(hid, buf, len);
+	if (ret == -ENOSYS)
+		hid_hw_raw_request(hid, report->id, buf, len, HID_OUTPUT_REPORT,
+				HID_REQ_SET_REPORT);
 	kfree(buf);
 }
 
@@ -1263,8 +1266,7 @@ static struct hid_input *hidinput_allocate(struct hid_device *hid)
 	}
 
 	input_set_drvdata(input_dev, hid);
-	if (hid->ll_driver->request || hid->hid_output_raw_report)
-		input_dev->event = hidinput_input_event;
+	input_dev->event = hidinput_input_event;
 	input_dev->open = hidinput_open;
 	input_dev->close = hidinput_close;
 	input_dev->setkeycode = hidinput_setkeycode;

drivers/hid/hid-lg.c

@@ -692,8 +692,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) {
 		unsigned char buf[] = { 0x00, 0xAF,  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
 
-		ret = hid_output_raw_report(hdev, buf, sizeof(buf),
-					    HID_FEATURE_REPORT);
+		ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 
 		if (ret >= 0) {
 			/* insert a little delay of 10 jiffies ~ 40ms */
@@ -705,8 +705,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			buf[1] = 0xB2;
 			get_random_bytes(&buf[2], 2);
 
-			ret = hid_output_raw_report(hdev, buf, sizeof(buf),
-						    HID_FEATURE_REPORT);
+			ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		}
 	}
 

drivers/hid/hid-logitech-dj.c

@@ -193,9 +193,6 @@ static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = {
 
 static struct hid_ll_driver logi_dj_ll_driver;
 
-static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
-					size_t count,
-					unsigned char report_type);
 static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev);
 
 static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
@@ -262,7 +259,6 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
 	}
 
 	dj_hiddev->ll_driver = &logi_dj_ll_driver;
-	dj_hiddev->hid_output_raw_report = logi_dj_output_hidraw_report;
 
 	dj_hiddev->dev.parent = &djrcv_hdev->dev;
 	dj_hiddev->bus = BUS_USB;
@@ -544,9 +540,10 @@ static void logi_dj_ll_close(struct hid_device *hid)
 	dbg_hid("%s:%s\n", __func__, hid->phys);
 }
 
-static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
-					size_t count,
-					unsigned char report_type)
+static int logi_dj_ll_raw_request(struct hid_device *hid,
+				  unsigned char reportnum, __u8 *buf,
+				  size_t count, unsigned char report_type,
+				  int reqtype)
 {
 	struct dj_device *djdev = hid->driver_data;
 	struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
@@ -567,15 +564,8 @@ static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
 	out_buf[1] = djdev->device_index;
 	memcpy(out_buf + 2, buf, count);
 
-	/*
-	 * hid-generic calls us with hid_output_raw_report(), but the LEDs
-	 * are set through a SET_REPORT command. It works for USB-HID devices
-	 * because usbhid either calls a SET_REPORT or directly send the output
-	 * report depending if the device presents an urbout.
-	 * Let be simple, send a SET_REPORT request.
-	 */
 	ret = hid_hw_raw_request(djrcv_dev->hdev, out_buf[0], out_buf,
-		DJREPORT_SHORT_LENGTH, report_type, HID_REQ_SET_REPORT);
+		DJREPORT_SHORT_LENGTH, report_type, reqtype);
 
 	kfree(out_buf);
 	return ret;
@@ -662,6 +652,7 @@ static struct hid_ll_driver logi_dj_ll_driver = {
 	.stop = logi_dj_ll_stop,
 	.open = logi_dj_ll_open,
 	.close = logi_dj_ll_close,
+	.raw_request = logi_dj_ll_raw_request,
 };
 
 

drivers/hid/hid-magicmouse.c

@@ -538,8 +538,8 @@ static int magicmouse_probe(struct hid_device *hdev,
 	 * but there seems to be no other way of switching the mode.
 	 * Thus the super-ugly hacky success check below.
 	 */
-	ret = hid_output_raw_report(hdev, feature, sizeof(feature),
-			HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, feature[0], feature, sizeof(feature),
+				HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	if (ret != -EIO && ret != sizeof(feature)) {
 		hid_err(hdev, "unable to request touch data (%d)\n", ret);
 		goto err_stop_hw;

drivers/hid/hid-sony.c

@@ -29,7 +29,6 @@
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/usb.h>
 #include <linux/leds.h>
 #include <linux/power_supply.h>
 #include <linux/spinlock.h>
@@ -1006,45 +1005,6 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
 	return 0;
 }
 
-/*
- * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
- * like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
- * so we need to override that forcing HID Output Reports on the Control EP.
- *
- * There is also another issue about HID Output Reports via USB, the Sixaxis
- * does not want the report_id as part of the data packet, so we have to
- * discard buf[0] when sending the actual control message, even for numbered
- * reports, humpf!
- */
-static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
-		size_t count, unsigned char report_type)
-{
-	struct usb_interface *intf = to_usb_interface(hid->dev.parent);
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface = intf->cur_altsetting;
-	int report_id = buf[0];
-	int ret;
-
-	if (report_type == HID_OUTPUT_REPORT) {
-		/* Don't send the Report ID */
-		buf++;
-		count--;
-	}
-
-	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		HID_REQ_SET_REPORT,
-		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		((report_type + 1) << 8) | report_id,
-		interface->desc.bInterfaceNumber, buf, count,
-		USB_CTRL_SET_TIMEOUT);
-
-	/* Count also the Report ID, in case of an Output report. */
-	if (ret > 0 && report_type == HID_OUTPUT_REPORT)
-		ret++;
-
-	return ret;
-}
-
 /*
  * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
  * to "operational".  Without this, the ps3 controller will not report any
@@ -1072,8 +1032,8 @@ static int sixaxis_set_operational_usb(struct hid_device *hdev)
 static int sixaxis_set_operational_bt(struct hid_device *hdev)
 {
 	unsigned char buf[] = { 0xf4,  0x42, 0x03, 0x00, 0x00 };
-	return hid_output_raw_report(hdev, buf, sizeof(buf),
-				     HID_FEATURE_REPORT);
+	return hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+				  HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 }
 
 /*
@@ -1305,11 +1265,8 @@ static void sixaxis_state_worker(struct work_struct *work)
 	buf[10] |= sc->led_state[2] << 3;
 	buf[10] |= sc->led_state[3] << 4;
 
-	if (sc->quirks & SIXAXIS_CONTROLLER_USB)
-		hid_output_raw_report(sc->hdev, buf, sizeof(buf), HID_OUTPUT_REPORT);
-	else
-		hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf),
-				HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
+	hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
+			HID_REQ_SET_REPORT);
 }
 
 static void dualshock4_state_worker(struct work_struct *work)
@@ -1659,7 +1616,18 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	}
 
 	if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
-		hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
+		/*
+		 * The Sony Sixaxis does not handle HID Output Reports on the
+		 * Interrupt EP like it could, so we need to force HID Output
+		 * Reports to use HID_REQ_SET_REPORT on the Control EP.
+		 *
+		 * There is also another issue about HID Output Reports via USB,
+		 * the Sixaxis does not want the report_id as part of the data
+		 * packet, so we have to discard buf[0] when sending the actual
+		 * control message, even for numbered reports, humpf!
+		 */
+		hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
+		hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
 		ret = sixaxis_set_operational_usb(hdev);
 		sc->worker_initialized = 1;
 		INIT_WORK(&sc->state_worker, sixaxis_state_worker);

drivers/hid/hid-thingm.c

@@ -48,8 +48,8 @@ static int blink1_send_command(struct blink1_data *data,
 			buf[0], buf[1], buf[2], buf[3], buf[4],
 			buf[5], buf[6], buf[7], buf[8]);
 
-	ret = hid_output_raw_report(data->hdev, buf, BLINK1_CMD_SIZE,
-				    HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(data->hdev, buf[0], buf, BLINK1_CMD_SIZE,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 
 	return ret < 0 ? ret : 0;
 }

drivers/hid/hid-wacom.c

@@ -128,7 +128,8 @@ static void wacom_set_image(struct hid_device *hdev, const char *image,
 
 	rep_data[0] = WAC_CMD_ICON_START_STOP;
 	rep_data[1] = 0;
-	ret = hid_output_raw_report(hdev, rep_data, 2, HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	if (ret < 0)
 		goto err;
 
@@ -142,14 +143,15 @@ static void wacom_set_image(struct hid_device *hdev, const char *image,
 			rep_data[j + 3] = p[(i << 6) + j];
 
 		rep_data[2] = i;
-		ret = hid_output_raw_report(hdev, rep_data, 67,
-					HID_FEATURE_REPORT);
+		ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 67,
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 	}
 
 	rep_data[0] = WAC_CMD_ICON_START_STOP;
 	rep_data[1] = 0;
 
-	ret = hid_output_raw_report(hdev, rep_data, 2, HID_FEATURE_REPORT);
+	ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 
 err:
 	return;
@@ -181,7 +183,8 @@ static void wacom_leds_set_brightness(struct led_classdev *led_dev,
 		buf[3] = value;
 		/* use fixed brightness for OLEDs */
 		buf[4] = 0x08;
-		hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT);
+		hid_hw_raw_request(hdev, buf[0], buf, 9, HID_FEATURE_REPORT,
+				   HID_REQ_SET_REPORT);
 		kfree(buf);
 	}
 
@@ -337,8 +340,8 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
 		rep_data[0] = 0x03 ; rep_data[1] = 0x00;
 		limit = 3;
 		do {
-			ret = hid_output_raw_report(hdev, rep_data, 2,
-					HID_FEATURE_REPORT);
+			ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		} while (ret < 0 && limit-- > 0);
 
 		if (ret >= 0) {
@@ -350,8 +353,9 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
 			rep_data[1] = 0x00;
 			limit = 3;
 			do {
-				ret = hid_output_raw_report(hdev,
-					rep_data, 2, HID_FEATURE_REPORT);
+				ret = hid_hw_raw_request(hdev, rep_data[0],
+					rep_data, 2, HID_FEATURE_REPORT,
+					HID_REQ_SET_REPORT);
 			} while (ret < 0 && limit-- > 0);
 
 			if (ret >= 0) {
@@ -376,8 +380,8 @@ static void wacom_set_features(struct hid_device *hdev, u8 speed)
 		rep_data[0] = 0x03;
 		rep_data[1] = wdata->features;
 
-		ret = hid_output_raw_report(hdev, rep_data, 2,
-					HID_FEATURE_REPORT);
+		ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
+				HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		if (ret >= 0)
 			wdata->high_speed = speed;
 		break;

drivers/hid/hid-wiimote-core.c

@@ -28,14 +28,14 @@ static int wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
 	__u8 *buf;
 	int ret;
 
-	if (!hdev->hid_output_raw_report)
+	if (!hdev->ll_driver->output_report)
 		return -ENODEV;
 
 	buf = kmemdup(buffer, count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
-	ret = hid_output_raw_report(hdev, buf, count, HID_OUTPUT_REPORT);
+	ret = hid_hw_output_report(hdev, buf, count);
 
 	kfree(buf);
 	return ret;

drivers/hid/hidraw.c

@@ -123,10 +123,6 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
 
 	dev = hidraw_table[minor]->hid;
 
-	if (!dev->hid_output_raw_report) {
-		ret = -ENODEV;
-		goto out;
-	}
 
 	if (count > HID_MAX_BUFFER_SIZE) {
 		hid_warn(dev, "pid %d passed too large report\n",
@@ -153,7 +149,21 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
 		goto out_free;
 	}
 
-	ret = hid_output_raw_report(dev, buf, count, report_type);
+	if ((report_type == HID_OUTPUT_REPORT) &&
+	    !(dev->quirks & HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP)) {
+		ret = hid_hw_output_report(dev, buf, count);
+		/*
+		 * compatibility with old implementation of USB-HID and I2C-HID:
+		 * if the device does not support receiving output reports,
+		 * on an interrupt endpoint, fallback to SET_REPORT HID command.
+		 */
+		if (ret != -ENOSYS)
+			goto out_free;
+	}
+
+	ret = hid_hw_raw_request(dev, buf[0], buf, count, report_type,
+				HID_REQ_SET_REPORT);
+
 out_free:
 	kfree(buf);
 out:

drivers/hid/i2c-hid/i2c-hid.c

@@ -256,18 +256,27 @@ static int i2c_hid_get_report(struct i2c_client *client, u8 reportType,
 	return 0;
 }
 
-static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
-		u8 reportID, unsigned char *buf, size_t data_len)
+/**
+ * i2c_hid_set_or_send_report: forward an incoming report to the device
+ * @client: the i2c_client of the device
+ * @reportType: 0x03 for HID_FEATURE_REPORT ; 0x02 for HID_OUTPUT_REPORT
+ * @reportID: the report ID
+ * @buf: the actual data to transfer, without the report ID
+ * @len: size of buf
+ * @use_data: true: use SET_REPORT HID command, false: send plain OUTPUT report
+ */
+static int i2c_hid_set_or_send_report(struct i2c_client *client, u8 reportType,
+		u8 reportID, unsigned char *buf, size_t data_len, bool use_data)
 {
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	u8 *args = ihid->argsbuf;
-	const struct i2c_hid_cmd * hidcmd = &hid_set_report_cmd;
+	const struct i2c_hid_cmd *hidcmd;
 	int ret;
 	u16 dataRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
 	u16 outputRegister = le16_to_cpu(ihid->hdesc.wOutputRegister);
 	u16 maxOutputLength = le16_to_cpu(ihid->hdesc.wMaxOutputLength);
 
-	/* hidraw already checked that data_len < HID_MAX_BUFFER_SIZE */
+	/* hid_hw_* already checked that data_len < HID_MAX_BUFFER_SIZE */
 	u16 size =	2			/* size */ +
 			(reportID ? 1 : 0)	/* reportID */ +
 			data_len		/* buf */;
@@ -278,6 +287,9 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
 
 	i2c_hid_dbg(ihid, "%s\n", __func__);
 
+	if (!use_data && maxOutputLength == 0)
+		return -ENOSYS;
+
 	if (reportID >= 0x0F) {
 		args[index++] = reportID;
 		reportID = 0x0F;
@@ -287,9 +299,10 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
 	 * use the data register for feature reports or if the device does not
 	 * support the output register
 	 */
-	if (reportType == 0x03 || maxOutputLength == 0) {
+	if (use_data) {
 		args[index++] = dataRegister & 0xFF;
 		args[index++] = dataRegister >> 8;
+		hidcmd = &hid_set_report_cmd;
 	} else {
 		args[index++] = outputRegister & 0xFF;
 		args[index++] = outputRegister >> 8;
@@ -550,7 +563,7 @@ static int i2c_hid_get_raw_report(struct hid_device *hid,
 }
 
 static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
-		size_t count, unsigned char report_type)
+		size_t count, unsigned char report_type, bool use_data)
 {
 	struct i2c_client *client = hid->driver_data;
 	int report_id = buf[0];
@@ -564,9 +577,9 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
 		count--;
 	}
 
-	ret = i2c_hid_set_report(client,
+	ret = i2c_hid_set_or_send_report(client,
 				report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
-				report_id, buf, count);
+				report_id, buf, count, use_data);
 
 	if (report_id && ret >= 0)
 		ret++; /* add report_id to the number of transfered bytes */
@@ -574,34 +587,27 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
 	return ret;
 }
 
-static void i2c_hid_request(struct hid_device *hid, struct hid_report *rep,
-		int reqtype)
+static int i2c_hid_output_report(struct hid_device *hid, __u8 *buf,
+		size_t count)
 {
-	struct i2c_client *client = hid->driver_data;
-	char *buf;
-	int ret;
-	int len = i2c_hid_get_report_length(rep) - 2;
-
-	buf = kzalloc(len, GFP_KERNEL);
-	if (!buf)
-		return;
+	return i2c_hid_output_raw_report(hid, buf, count, HID_OUTPUT_REPORT,
+			false);
+}
 
+static int i2c_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
+			       __u8 *buf, size_t len, unsigned char rtype,
+			       int reqtype)
+{
 	switch (reqtype) {
 	case HID_REQ_GET_REPORT:
-		ret = i2c_hid_get_raw_report(hid, rep->id, buf, len, rep->type);
-		if (ret < 0)
-			dev_err(&client->dev, "%s: unable to get report: %d\n",
-				__func__, ret);
-		else
-			hid_input_report(hid, rep->type, buf, ret, 0);
-		break;
+		return i2c_hid_get_raw_report(hid, reportnum, buf, len, rtype);
 	case HID_REQ_SET_REPORT:
-		hid_output_report(rep, buf);
-		i2c_hid_output_raw_report(hid, buf, len, rep->type);
-		break;
+		if (buf[0] != reportnum)
+			return -EINVAL;
+		return i2c_hid_output_raw_report(hid, buf, len, rtype, true);
+	default:
+		return -EIO;
 	}
-
-	kfree(buf);
 }
 
 static int i2c_hid_parse(struct hid_device *hid)
@@ -760,7 +766,8 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
 	.open = i2c_hid_open,
 	.close = i2c_hid_close,
 	.power = i2c_hid_power,
-	.request = i2c_hid_request,
+	.output_report = i2c_hid_output_report,
+	.raw_request = i2c_hid_raw_request,
 };
 
 static int i2c_hid_init_irq(struct i2c_client *client)
@@ -1005,7 +1012,6 @@ static int i2c_hid_probe(struct i2c_client *client,
 
 	hid->driver_data = client;
 	hid->ll_driver = &i2c_hid_ll_driver;
-	hid->hid_output_raw_report = i2c_hid_output_raw_report;
 	hid->dev.parent = &client->dev;
 	ACPI_COMPANION_SET(&hid->dev, ACPI_COMPANION(&client->dev));
 	hid->bus = BUS_I2C;

drivers/hid/uhid.c

@@ -247,27 +247,22 @@ static int uhid_hid_output_raw(struct hid_device *hid, __u8 *buf, size_t count,
 static int uhid_hid_output_report(struct hid_device *hid, __u8 *buf,
 				  size_t count)
 {
-	struct uhid_device *uhid = hid->driver_data;
-	unsigned long flags;
-	struct uhid_event *ev;
-
-	if (count < 1 || count > UHID_DATA_MAX)
-		return -EINVAL;
-
-	ev = kzalloc(sizeof(*ev), GFP_KERNEL);
-	if (!ev)
-		return -ENOMEM;
-
-	ev->type = UHID_OUTPUT;
-	ev->u.output.size = count;
-	ev->u.output.rtype = UHID_OUTPUT_REPORT;
-	memcpy(ev->u.output.data, buf, count);
-
-	spin_lock_irqsave(&uhid->qlock, flags);
-	uhid_queue(uhid, ev);
-	spin_unlock_irqrestore(&uhid->qlock, flags);
+	return uhid_hid_output_raw(hid, buf, count, HID_OUTPUT_REPORT);
+}
 
-	return count;
+static int uhid_raw_request(struct hid_device *hid, unsigned char reportnum,
+			    __u8 *buf, size_t len, unsigned char rtype,
+			    int reqtype)
+{
+	switch (reqtype) {
+	case HID_REQ_GET_REPORT:
+		return uhid_hid_get_raw(hid, reportnum, buf, len, rtype);
+	case HID_REQ_SET_REPORT:
+		/* TODO: implement proper SET_REPORT functionality */
+		return -ENOSYS;
+	default:
+		return -EIO;
+	}
 }
 
 static struct hid_ll_driver uhid_hid_driver = {
@@ -277,6 +272,7 @@ static struct hid_ll_driver uhid_hid_driver = {
 	.close = uhid_hid_close,
 	.parse = uhid_hid_parse,
 	.output_report = uhid_hid_output_report,
+	.raw_request = uhid_raw_request,
 };
 
 #ifdef CONFIG_COMPAT
@@ -404,7 +400,6 @@ static int uhid_dev_create(struct uhid_device *uhid,
 	hid->uniq[63] = 0;
 
 	hid->ll_driver = &uhid_hid_driver;
-	hid->hid_output_raw_report = uhid_hid_output_raw;
 	hid->bus = ev->u.create.bus;
 	hid->vendor = ev->u.create.vendor;
 	hid->product = ev->u.create.product;

drivers/hid/usbhid/hid-core.c

@@ -894,7 +894,12 @@ static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
 	int ret, skipped_report_id = 0;
 
 	/* Byte 0 is the report number. Report data starts at byte 1.*/
-	buf[0] = reportnum;
+	if ((rtype == HID_OUTPUT_REPORT) &&
+	    (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
+		buf[0] = 0;
+	else
+		buf[0] = reportnum;
+
 	if (buf[0] == 0x0) {
 		/* Don't send the Report ID */
 		buf++;
@@ -922,7 +927,7 @@ static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count)
 	int actual_length, skipped_report_id = 0, ret;
 
 	if (!usbhid->urbout)
-		return -EIO;
+		return -ENOSYS;
 
 	if (buf[0] == 0x0) {
 		/* Don't send the Report ID */
@@ -945,17 +950,6 @@ static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count)
 	return ret;
 }
 
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf,
-		size_t count, unsigned char report_type)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if (usbhid->urbout && report_type != HID_FEATURE_REPORT)
-		return usbhid_output_report(hid, buf, count);
-
-	return usbhid_set_raw_report(hid, buf[0], buf, count, report_type);
-}
-
 static void usbhid_restart_queues(struct usbhid_device *usbhid)
 {
 	if (usbhid->urbout && !test_bit(HID_OUT_RUNNING, &usbhid->iofl))
@@ -1289,7 +1283,6 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
 
 	usb_set_intfdata(intf, hid);
 	hid->ll_driver = &usb_hid_driver;
-	hid->hid_output_raw_report = usbhid_output_raw_report;
 	hid->ff_init = hid_pidff_init;
 #ifdef CONFIG_USB_HIDDEV
 	hid->hiddev_connect = hiddev_connect;

include/linux/hid.h

@@ -287,6 +287,8 @@ struct hid_item {
 #define HID_QUIRK_NO_EMPTY_INPUT		0x00000100
 #define HID_QUIRK_NO_INIT_INPUT_REPORTS		0x00000200
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
+#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID		0x00020000
+#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP	0x00040000
 #define HID_QUIRK_FULLSPEED_INTERVAL		0x10000000
 #define HID_QUIRK_NO_INIT_REPORTS		0x20000000
 #define HID_QUIRK_NO_IGNORE			0x40000000
@@ -508,9 +510,6 @@ struct hid_device {							/* device report descriptor */
 				  struct hid_usage *, __s32);
 	void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
 
-	/* handler for raw output data, used by hidraw */
-	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
-
 	/* debugging support via debugfs */
 	unsigned short debug;
 	struct dentry *debug_dir;
@@ -753,6 +752,7 @@ struct hid_field *hidinput_get_led_field(struct hid_device *hid);
 unsigned int hidinput_count_leds(struct hid_device *hid);
 __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code);
 void hid_output_report(struct hid_report *report, __u8 *data);
+void __hid_request(struct hid_device *hid, struct hid_report *rep, int reqtype);
 u8 *hid_alloc_report_buf(struct hid_report *report, gfp_t flags);
 struct hid_device *hid_allocate_device(void);
 struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
@@ -965,7 +965,9 @@ static inline void hid_hw_request(struct hid_device *hdev,
 				  struct hid_report *report, int reqtype)
 {
 	if (hdev->ll_driver->request)
-		hdev->ll_driver->request(hdev, report, reqtype);
+		return hdev->ll_driver->request(hdev, report, reqtype);
+
+	__hid_request(hdev, report, reqtype);
 }
 
 /**
@@ -986,11 +988,11 @@ static inline int hid_hw_raw_request(struct hid_device *hdev,
 				  unsigned char reportnum, __u8 *buf,
 				  size_t len, unsigned char rtype, int reqtype)
 {
-	if (hdev->ll_driver->raw_request)
-		return hdev->ll_driver->raw_request(hdev, reportnum, buf, len,
-						    rtype, reqtype);
+	if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
+		return -EINVAL;
 
-	return -ENOSYS;
+	return hdev->ll_driver->raw_request(hdev, reportnum, buf, len,
+						    rtype, reqtype);
 }
 
 /**
@@ -1005,28 +1007,15 @@ static inline int hid_hw_raw_request(struct hid_device *hdev,
 static inline int hid_hw_output_report(struct hid_device *hdev, __u8 *buf,
 					size_t len)
 {
+	if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
+		return -EINVAL;
+
 	if (hdev->ll_driver->output_report)
 		return hdev->ll_driver->output_report(hdev, buf, len);
 
 	return -ENOSYS;
 }
 
-/**
- * hid_output_raw_report - send an output or a feature report to the device
- *
- * @hdev: hid device
- * @buf: raw data to transfer
- * @len: length of buf
- * @report_type: HID_FEATURE_REPORT or HID_OUTPUT_REPORT
- *
- * @return: count of data transfered, negative if error
- */
-static inline int hid_output_raw_report(struct hid_device *hdev, __u8 *buf,
-					size_t len, unsigned char report_type)
-{
-	return hdev->hid_output_raw_report(hdev, buf, len, report_type);
-}
-
 /**
  * hid_hw_idle - send idle request to device
  *

net/bluetooth/hidp/core.c

@@ -382,18 +382,6 @@ static int hidp_output_report(struct hid_device *hid, __u8 *data, size_t count)
 				      data, count);
 }
 
-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data,
-		size_t count, unsigned char report_type)
-{
-	if (report_type == HID_OUTPUT_REPORT) {
-		return hidp_output_report(hid, data, count);
-	} else if (report_type != HID_FEATURE_REPORT) {
-		return -EINVAL;
-	}
-
-	return hidp_set_raw_report(hid, data[0], data, count, report_type);
-}
-
 static int hidp_raw_request(struct hid_device *hid, unsigned char reportnum,
 			    __u8 *buf, size_t len, unsigned char rtype,
 			    int reqtype)
@@ -776,8 +764,6 @@ static int hidp_setup_hid(struct hidp_session *session,
 	hid->dev.parent = &session->conn->hcon->dev;
 	hid->ll_driver = &hidp_hid_driver;
 
-	hid->hid_output_raw_report = hidp_output_raw_report;
-
 	/* True if device is blacklisted in drivers/hid/hid-core.c */
 	if (hid_ignore(hid)) {
 		hid_destroy_device(session->hid);