ARM: S5PC100: no more support S5PC100 SoC

This patch removes supporting codes for s5pc100 because no more used
now.

[jason@lakedaemon.net: for drivers/irqchip/Kconfig]
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Documentation/arm/Samsung/Overview.txt

@@ -13,7 +13,6 @@ Introduction
 
   - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
   - S3C64XX: S3C6400 and S3C6410
-  - S5PC100
   - S5PC110 / S5PV210
 
 
@@ -33,7 +32,6 @@ Configuration
   A number of configurations are supplied, as there is no current way of
   unifying all the SoCs into one kernel.
 
-  s5pc100_defconfig - S5PC100 specific default configuration
   s5pc110_defconfig - S5PC110 specific default configuration
   s5pv210_defconfig - S5PV210 specific default configuration
 
@@ -65,13 +63,6 @@ Layout changes
   where to simplify the include and dependency issues involved with having
   so many different platform directories.
 
-  It was decided to remove plat-s5pc1xx as some of the support was already
-  in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
-  the only user was the S5PC100. The S5PC100 specific items where moved to
-  arch/arm/mach-s5pc100.
-
-
-
 
 Port Contributors
 -----------------

Documentation/arm/Samsung/clksrc-change-registers.awk

@@ -68,7 +68,6 @@ BEGIN {
 
     while (getline line < ARGV[1] > 0) {
 	if (line ~ /\#define.*_MASK/ &&
-	    !(line ~ /S5PC100_EPLL_MASK/) &&
 	    !(line ~ /USB_SIG_MASK/)) {
 	    splitdefine(line, fields)
 	    name = fields[0]

arch/arm/Kconfig

@@ -758,24 +758,6 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
-config ARCH_S5PC100
-	bool "Samsung S5PC100"
-	select ARCH_REQUIRE_GPIOLIB
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_GPIO_H
-	select SAMSUNG_ATAGS
-	select SAMSUNG_WDT_RESET
-	help
-	  Samsung S5PC100 series based systems
-
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -986,8 +968,6 @@ source "arch/arm/mach-s3c24xx/Kconfig"
 
 source "arch/arm/mach-s3c64xx/Kconfig"
 
-source "arch/arm/mach-s5pc100/Kconfig"
-
 source "arch/arm/mach-s5pv210/Kconfig"
 
 source "arch/arm/mach-exynos/Kconfig"
@@ -2174,7 +2154,6 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
 	def_bool y

arch/arm/Makefile

@@ -187,7 +187,6 @@ machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
 machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
 machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
-machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile

arch/arm/configs/s5pc100_defconfig

@@ -1,49 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PC100=y
-CONFIG_MACH_SMDKC100=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_AT24=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y

arch/arm/mach-s5pc100/Kconfig

@@ -1,81 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-#	Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5PC100 CPU
-
-if ARCH_S5PC100
-
-config CPU_S5PC100
-	bool
-	select ARM_AMBA
-	select PL330_DMA if DMADEVICES
-	select S5P_EXT_INT
-	help
-	  Enable S5PC100 CPU support
-
-config S5PC100_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC100_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S5PC100_SETUP_IDE
-	bool
-	help
-	  Common setup code for S5PC100 IDE GPIO configurations
-
-config S5PC100_SETUP_KEYPAD
-	bool
-	help
-	  Common setup code for KEYPAD GPIO configurations.
-
-config S5PC100_SETUP_SDHCI
-	bool
-	select S5PC100_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S5PC100 based SDHCI systems
-
-config S5PC100_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-config S5PC100_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations.
-
-config MACH_SMDKC100
-	bool "SMDKC100"
-	select CPU_S5PC100
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S5PC100_SETUP_FB_24BPP
-	select S5PC100_SETUP_I2C1
-	select S5PC100_SETUP_IDE
-	select S5PC100_SETUP_KEYPAD
-	select S5PC100_SETUP_SDHCI
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the Samsung SMDKC100
-
-endif

arch/arm/mach-s5pc100/Makefile

@@ -1,32 +0,0 @@
-# arch/arm/mach-s5pc100/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core
-
-obj-y				+= common.o clock.o
-
-obj-y				+= dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
-
-# device support
-
-obj-y				+= dev-audio.o
-
-obj-y					+= setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-obj-$(CONFIG_S5PC100_SETUP_SPI)		+= setup-spi.o

arch/arm/mach-s5pc100/Makefile.boot

@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100

arch/arm/mach-s5pc100/clock.c

@@ -1,1361 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PC100 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static struct clk s5p_clk_otgphy = {
-	.name		= "otg_phy",
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
-static struct clk *clk_src_mout_href_list[] = {
-	[0] = &s5p_clk_27m,
-	[1] = &clk_fin_hpll,
-};
-
-static struct clksrc_sources clk_src_mout_href = {
-	.sources	= clk_src_mout_href_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_href_list),
-};
-
-static struct clksrc_clk clk_mout_href = {
-	.clk = {
-		.name           = "mout_href",
-	},
-	.sources        = &clk_src_mout_href,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
-};
-
-static struct clk *clk_src_mout_48m_list[] = {
-	[0] = &clk_xusbxti,
-	[1] = &s5p_clk_otgphy,
-};
-
-static struct clksrc_sources clk_src_mout_48m = {
-	.sources	= clk_src_mout_48m_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_48m_list),
-};
-
-static struct clksrc_clk clk_mout_48m = {
-	.clk = {
-		.name           = "mout_48m",
-	},
-	.sources        = &clk_src_mout_48m,
-	.reg_src        = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name           = "mout_mpll",
-	},
-	.sources        = &clk_src_mpll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk    = {
-		.name           = "mout_apll",
-	},
-	.sources        = &clk_src_apll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk    = {
-		.name           = "mout_epll",
-	},
-	.sources        = &clk_src_epll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-static struct clk *clk_src_mout_hpll_list[] = {
-	[0] = &s5p_clk_27m,
-};
-
-static struct clksrc_sources clk_src_mout_hpll = {
-	.sources	= clk_src_mout_hpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
-	.clk    = {
-		.name           = "mout_hpll",
-	},
-	.sources        = &clk_src_mout_hpll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_apll = {
-	.clk	= {
-		.name	= "div_apll",
-		.parent	= &clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_arm = {
-	.clk	= {
-		.name	= "div_arm",
-		.parent	= &clk_div_apll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_d0_bus = {
-	.clk	= {
-		.name	= "div_d0_bus",
-		.parent	= &clk_div_arm.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_pclkd0 = {
-	.clk	= {
-		.name	= "div_pclkd0",
-		.parent	= &clk_div_d0_bus.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_secss = {
-	.clk	= {
-		.name	= "div_secss",
-		.parent	= &clk_div_d0_bus.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_apll2 = {
-	.clk	= {
-		.name	= "div_apll2",
-		.parent	= &clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
-};
-
-static struct clk *clk_src_mout_am_list[] = {
-	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_div_apll2.clk,
-};
-
-static struct clksrc_sources clk_src_mout_am = {
-	.sources	= clk_src_mout_am_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
-	.clk	= {
-		.name	= "mout_am",
-	},
-	.sources = &clk_src_mout_am,
-	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_d1_bus = {
-	.clk	= {
-		.name	= "div_d1_bus",
-		.parent	= &clk_mout_am.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_mpll2 = {
-	.clk	= {
-		.name	= "div_mpll2",
-		.parent	= &clk_mout_am.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_mpll = {
-	.clk	= {
-		.name	= "div_mpll",
-		.parent	= &clk_mout_am.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
-};
-
-static struct clk *clk_src_mout_onenand_list[] = {
-	[0] = &clk_div_d0_bus.clk,
-	[1] = &clk_div_d1_bus.clk,
-};
-
-static struct clksrc_sources clk_src_mout_onenand = {
-	.sources	= clk_src_mout_onenand_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
-	.clk	= {
-		.name	= "mout_onenand",
-	},
-	.sources = &clk_src_mout_onenand,
-	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_onenand = {
-	.clk	= {
-		.name	= "div_onenand",
-		.parent	= &clk_mout_onenand.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
-};
-
-static struct clksrc_clk clk_div_pclkd1 = {
-	.clk	= {
-		.name	= "div_pclkd1",
-		.parent	= &clk_div_d1_bus.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_cam = {
-	.clk	= {
-		.name	= "div_cam",
-		.parent	= &clk_div_mpll2.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
-};
-
-static struct clksrc_clk clk_div_hdmi = {
-	.clk	= {
-		.name	= "div_hdmi",
-		.parent	= &clk_mout_hpll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
-};
-
-static u32 epll_div[][4] = {
-	{ 32750000,	131, 3, 4 },
-	{ 32768000,	131, 3, 4 },
-	{ 36000000,	72,  3, 3 },
-	{ 45000000,	90,  3, 3 },
-	{ 45158000,	90,  3, 3 },
-	{ 45158400,	90,  3, 3 },
-	{ 48000000,	96,  3, 3 },
-	{ 49125000,	131, 4, 3 },
-	{ 49152000,	131, 4, 3 },
-	{ 60000000,	120, 3, 3 },
-	{ 67737600,	226, 5, 3 },
-	{ 67738000,	226, 5, 3 },
-	{ 73800000,	246, 5, 3 },
-	{ 73728000,	246, 5, 3 },
-	{ 72000000,	144, 3, 3 },
-	{ 84000000,	168, 3, 3 },
-	{ 96000000,	96,  3, 2 },
-	{ 144000000,	144, 3, 2 },
-	{ 192000000,	96,  3, 1 }
-};
-
-static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con;
-	unsigned int i;
-
-	if (clk->rate == rate)	/* Return if nothing changed */
-		return 0;
-
-	epll_con = __raw_readl(S5P_EPLL_CON);
-
-	epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		if (epll_div[i][0] == rate) {
-			epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
-				    (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
-				    (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P_EPLL_CON);
-
-	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
-			clk->rate, rate);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5pc100_epll_ops = {
-	.get_rate = s5p_epll_get_rate,
-	.set_rate = s5pc100_epll_set_rate,
-};
-
-static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
-}
-
-static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "cssys",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "secss",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "g2d",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "mdma",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "nfcon",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "onenandc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "sdm",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_2_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "seckey",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_2_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "modemif",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "otg",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "usbhost",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "rotator",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5p-fimc.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5p-fimc.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5p-fimc.2",
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "jpeg",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "mipi-dsim",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "mipi-csis",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "g3d",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "tv",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "vp",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "mixer",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "hdmi",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "mfc",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "apc",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "iec",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "systimer",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "spi",
-		.devname	= "s5pc100-spi.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "spi",
-		.devname	= "s5pc100-spi.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "spi",
-		.devname	= "s5pc100-spi.2",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "irda",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "ccan",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "ccan",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "hsitx",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "hsirx",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.0",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.1",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "spdif",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "adc",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "keypad",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 17),
-	},
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_div_d1_bus.clk,
-	.enable		= s5pc100_d1_0_ctrl,
-	.ctrlbit	= (1 << 7),
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_div_d1_bus.clk,
-	.enable		= s5pc100_d1_0_ctrl,
-	.ctrlbit	= (1 << 6),
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_div_d1_bus.clk,
-	.enable		= s5pc100_d1_0_ctrl,
-	.ctrlbit	= (1 << 5),
-};
-
-static struct clk clk_48m_spi0 = {
-	.name		= "spi_48m",
-	.devname	= "s5pc100-spi.0",
-	.parent		= &clk_mout_48m.clk,
-	.enable		= s5pc100_sclk0_ctrl,
-	.ctrlbit	= (1 << 7),
-};
-
-static struct clk clk_48m_spi1 = {
-	.name		= "spi_48m",
-	.devname	= "s5pc100-spi.1",
-	.parent		= &clk_mout_48m.clk,
-	.enable		= s5pc100_sclk0_ctrl,
-	.ctrlbit	= (1 << 8),
-};
-
-static struct clk clk_48m_spi2 = {
-	.name		= "spi_48m",
-	.devname	= "s5pc100-spi.2",
-	.parent		= &clk_mout_48m.clk,
-	.enable		= s5pc100_sclk0_ctrl,
-	.ctrlbit	= (1 << 9),
-};
-
-static struct clk clk_i2s0 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.0",
-	.parent		= &clk_div_pclkd1.clk,
-	.enable		= s5pc100_d1_5_ctrl,
-	.ctrlbit	= (1 << 0),
-};
-
-static struct clk clk_i2s1 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.1",
-	.parent		= &clk_div_pclkd1.clk,
-	.enable		= s5pc100_d1_5_ctrl,
-	.ctrlbit	= (1 << 1),
-};
-
-static struct clk clk_i2s2 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.2",
-	.parent		= &clk_div_pclkd1.clk,
-	.enable		= s5pc100_d1_5_ctrl,
-	.ctrlbit	= (1 << 2),
-};
-
-static struct clk clk_vclk54m = {
-	.name		= "vclk_54m",
-	.rate		= 54000000,
-};
-
-static struct clk clk_i2scdclk0 = {
-	.name		= "i2s_cdclk0",
-};
-
-static struct clk clk_i2scdclk1 = {
-	.name		= "i2s_cdclk1",
-};
-
-static struct clk clk_i2scdclk2 = {
-	.name		= "i2s_cdclk2",
-};
-
-static struct clk clk_pcmcdclk0 = {
-	.name		= "pcm_cdclk0",
-};
-
-static struct clk clk_pcmcdclk1 = {
-	.name		= "pcm_cdclk1",
-};
-
-static struct clk *clk_src_group1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll2.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group1 = {
-	.sources	= clk_src_group1_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group1_list),
-};
-
-static struct clk *clk_src_group2_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_group2 = {
-	.sources	= clk_src_group2_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group2_list),
-};
-
-static struct clk *clk_src_group3_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_i2scdclk0,
-	[4] = &clk_pcmcdclk0,
-	[5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group3 = {
-	.sources	= clk_src_group3_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group3_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
-	.clk	= {
-		.name		= "sclk_audio",
-		.devname	= "samsung-pcm.0",
-		.ctrlbit	= (1 << 8),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_group3,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-};
-
-static struct clk *clk_src_group4_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_i2scdclk1,
-	[4] = &clk_pcmcdclk1,
-	[5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group4 = {
-	.sources	= clk_src_group4_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group4_list),
-};
-
-static struct clksrc_clk clk_sclk_audio1 = {
-	.clk	= {
-		.name		= "sclk_audio",
-		.devname	= "samsung-pcm.1",
-		.ctrlbit	= (1 << 9),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_group4,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-};
-
-static struct clk *clk_src_group5_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_i2scdclk2,
-	[4] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group5 = {
-	.sources	= clk_src_group5_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group5_list),
-};
-
-static struct clksrc_clk clk_sclk_audio2 = {
-	.clk	= {
-		.name		= "sclk_audio",
-		.devname	= "samsung-pcm.2",
-		.ctrlbit	= (1 << 10),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_group5,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-};
-
-static struct clk *clk_src_group6_list[] = {
-	[0] = &s5p_clk_27m,
-	[1] = &clk_vclk54m,
-	[2] = &clk_div_hdmi.clk,
-};
-
-static struct clksrc_sources clk_src_group6 = {
-	.sources	= clk_src_group6_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group6_list),
-};
-
-static struct clk *clk_src_group7_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_mout_hpll.clk,
-	[3] = &clk_vclk54m,
-};
-
-static struct clksrc_sources clk_src_group7 = {
-	.sources	= clk_src_group7_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group7_list),
-};
-
-static struct clk *clk_src_mmc0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-};
-
-static struct clksrc_sources clk_src_mmc0 = {
-	.sources	= clk_src_mmc0_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mmc0_list),
-};
-
-static struct clk *clk_src_mmc12_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_mmc12 = {
-	.sources	= clk_src_mmc12_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mmc12_list),
-};
-
-static struct clk *clk_src_irda_usb_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_irda_usb = {
-	.sources	= clk_src_irda_usb_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_irda_usb_list),
-};
-
-static struct clk *clk_src_pwi_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_mout_epll.clk,
-	[2] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_pwi = {
-	.sources	= clk_src_pwi_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_pwi_list),
-};
-
-static struct clk *clk_sclk_spdif_list[] = {
-	[0] = &clk_sclk_audio0.clk,
-	[1] = &clk_sclk_audio1.clk,
-	[2] = &clk_sclk_audio2.clk,
-};
-
-static struct clksrc_sources clk_src_sclk_spdif = {
-	.sources	= clk_sclk_spdif_list,
-	.nr_sources	= ARRAY_SIZE(clk_sclk_spdif_list),
-};
-
-static struct clksrc_clk clk_sclk_spdif = {
-	.clk	= {
-		.name		= "sclk_spdif",
-		.ctrlbit	= (1 << 11),
-		.enable		= s5pc100_sclk1_ctrl,
-		.ops		= &s5p_sclk_spdif_ops,
-	},
-	.sources = &clk_src_sclk_spdif,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_mixer",
-			.ctrlbit	= (1 << 6),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_group6,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
-	}, {
-		.clk	= {
-			.name		= "sclk_lcd",
-			.ctrlbit	= (1 << 0),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5p-fimc.0",
-			.ctrlbit	= (1 << 1),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5p-fimc.1",
-			.ctrlbit	= (1 << 2),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5p-fimc.2",
-			.ctrlbit	= (1 << 3),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_irda",
-			.ctrlbit	= (1 << 10),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_irda_usb,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_irda",
-			.ctrlbit	= (1 << 10),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_mmc12,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_pwi",
-			.ctrlbit	= (1 << 1),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_pwi,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "sclk_uhost",
-			.ctrlbit	= (1 << 11),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_irda_usb,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
-	},
-};
-
-static struct clksrc_clk clk_sclk_uart = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit	= (1 << 3),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group2,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 12),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_mmc0,
-	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 13),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_mmc12,
-	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit	= (1 << 14),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_mmc12,
-	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s5pc100-spi.0",
-		.ctrlbit	= (1 << 4),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group1,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s5pc100-spi.1",
-		.ctrlbit	= (1 << 5),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group1,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi2 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s5pc100-spi.2",
-		.ctrlbit	= (1 << 6),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group1,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_mout_hpll,
-	&clk_mout_href,
-	&clk_mout_48m,
-	&clk_div_apll,
-	&clk_div_arm,
-	&clk_div_d0_bus,
-	&clk_div_pclkd0,
-	&clk_div_secss,
-	&clk_div_apll2,
-	&clk_mout_am,
-	&clk_div_d1_bus,
-	&clk_div_mpll2,
-	&clk_div_mpll,
-	&clk_mout_onenand,
-	&clk_div_onenand,
-	&clk_div_pclkd1,
-	&clk_div_cam,
-	&clk_div_hdmi,
-	&clk_sclk_audio0,
-	&clk_sclk_audio1,
-	&clk_sclk_audio2,
-	&clk_sclk_spdif,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_48m_spi0,
-	&clk_48m_spi1,
-	&clk_48m_spi2,
-	&clk_i2s0,
-	&clk_i2s1,
-	&clk_i2s2,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uart,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_sclk_spi2,
-};
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
-	unsigned long xtal;
-	unsigned long arm;
-	unsigned long hclkd0;
-	unsigned long hclkd1;
-	unsigned long pclkd0;
-	unsigned long pclkd1;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long hpll;
-	unsigned int ptr;
-
-	/* Set S5PC100 functions for clk_fout_epll */
-	clk_fout_epll.enable = s5p_epll_enable;
-	clk_fout_epll.ops = &s5pc100_epll_ops;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal = clk_get_rate(&clk_xtal);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
-	mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
-	epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
-	hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
-
-	printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
-			print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_mout_hpll.clk.rate = hpll;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-
-	arm = clk_get_rate(&clk_div_arm.clk);
-	hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
-	pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
-	hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
-	pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
-
-	printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
-			print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
-
-	clk_f.rate = arm;
-	clk_h.rate = hclkd1;
-	clk_p.rate = pclkd1;
-}
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
-	{
-		.name		= "tzic",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "intc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "ebi",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "intmem",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "sromc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "dmc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "chipid",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "timers",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 6),
-	},
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_i2scdclk0,
-	&clk_i2scdclk1,
-	&clk_i2scdclk2,
-	&clk_pcmcdclk0,
-	&clk_pcmcdclk1,
-};
-
-static struct clk_lookup s5pc100_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
-	CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
-	CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
-	CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-};
-
-void __init s5pc100_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
-		s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
-		s3c_disable_clocks(clk_cdev[ptr], 1);
-
-	s3c24xx_register_clock(&dummy_apb_pclk);
-}

arch/arm/mach-s5pc100/common.c

@@ -1,255 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Common Codes for S5PC100
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/ata-core.h>
-#include <plat/fb-core.h>
-#include <plat/iic-core.h>
-#include <plat/onenand-core.h>
-#include <plat/pwm-core.h>
-#include <plat/spi-core.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S5PC100_CPU_ID,
-		.idmask		= S5PC100_CPU_MASK,
-		.map_io		= s5pc100_map_io,
-		.init_clocks	= s5pc100_init_clocks,
-		.init_uarts	= s5pc100_init_uarts,
-		.init		= s5pc100_init,
-		.name		= name_s5pc100,
-	},
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5pc100_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5PC100_PA_CHIPID),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S5PC100_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5PC100_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S5PC100_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5PC100_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(S5PC100_PA_SYSTIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5PC100_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5PC100_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5PC100_PA_VIC2),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
-		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}
-};
-
-static struct samsung_pwm_variant s5pc100_pwm_variant = {
-	.bits		= 32,
-	.div_base	= 0,
-	.has_tint_cstat	= true,
-	.tclk_mask	= (1 << 5),
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
-	s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
-	s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
-	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
-		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
-		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
-	};
-
-	samsung_pwm_clocksource_init(S3C_VA_TIMER,
-					timer_irqs, &s5pc100_pwm_variant);
-}
-
-/*
- * s5pc100_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialize the io descriptors we need for initialization */
-	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
-	if (mach_desc)
-		iotable_init(mach_desc, size);
-
-	/* detect cpu id and rev. */
-	s5p_init_cpu(S5P_VA_CHIPID);
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
-	samsung_pwm_set_platdata(&s5pc100_pwm_variant);
-}
-
-void __init s5pc100_map_io(void)
-{
-	/* initialise device information early */
-	s5pc100_default_sdhci0();
-	s5pc100_default_sdhci1();
-	s5pc100_default_sdhci2();
-
-	s3c_adc_setname("s3c64xx-adc");
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_onenand_setname("s5pc100-onenand");
-	s3c_fb_setname("s5pc100-fb");
-	s3c_cfcon_setname("s5pc100-pata");
-
-	s3c64xx_spi_setname("s5pc100-spi");
-}
-
-void __init s5pc100_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5pc100_register_clocks();
-	s5pc100_setup_clocks();
-	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
-}
-
-void __init s5pc100_init_irq(void)
-{
-	u32 vic[] = {~0, ~0, ~0};
-
-	/* VIC0, VIC1, and VIC2 are fully populated. */
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-static struct bus_type s5pc100_subsys = {
-	.name		= "s5pc100-core",
-	.dev_name	= "s5pc100-core",
-};
-
-static struct device s5pc100_dev = {
-	.bus	= &s5pc100_subsys,
-};
-
-static int __init s5pc100_core_init(void)
-{
-	return subsys_system_register(&s5pc100_subsys, NULL);
-}
-core_initcall(s5pc100_core_init);
-
-int __init s5pc100_init(void)
-{
-	printk(KERN_INFO "S5PC100: Initializing architecture\n");
-	return device_register(&s5pc100_dev);
-}
-
-/* uart registration process */
-
-void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode != REBOOT_SOFT)
-		samsung_wdt_reset();
-
-	soft_restart(0);
-}

arch/arm/mach-s5pc100/common.h

@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S5PC100 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
-#define __ARCH_ARM_MACH_S5PC100_COMMON_H
-
-#include <linux/reboot.h>
-
-void s5pc100_init_io(struct map_desc *mach_desc, int size);
-void s5pc100_init_irq(void);
-
-void s5pc100_register_clocks(void);
-void s5pc100_setup_clocks(void);
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd);
-
-extern  int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */

arch/arm/mach-s5pc100/dev-audio.c

@@ -1,239 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5pc100_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case 0: /* Dedicated pins */
-		break;
-	case 1:
-		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
-		break;
-	case 2:
-		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
-		break;
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
-	.cfg_gpio = s5pc100_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
-					 | QUIRK_NEED_RSTCLR,
-		},
-	},
-};
-
-static struct resource s5pc100_iis0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
-	[3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
-};
-
-struct platform_device s5pc100_device_iis0 = {
-	.name = "samsung-i2s",
-	.id = 0,
-	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
-	.resource	  = s5pc100_iis0_resource,
-	.dev = {
-		.platform_data = &i2sv5_pdata,
-	},
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
-	.cfg_gpio = s5pc100_cfg_i2s,
-};
-
-static struct resource s5pc100_iis1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device s5pc100_device_iis1 = {
-	.name		  = "samsung-i2s",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
-	.resource	  = s5pc100_iis1_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-static struct resource s5pc100_iis2_resource[] = {
-	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
-	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device s5pc100_device_iis2 = {
-	.name		  = "samsung-i2s",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
-	.resource	  = s5pc100_iis2_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
-		break;
-
-	case 1:
-		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5pc100_pcm_cfg_gpio,
-};
-
-static struct resource s5pc100_pcm0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device s5pc100_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5pc100_pcm0_resource),
-	.resource	  = s5pc100_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource s5pc100_pcm1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
-};
-
-struct platform_device s5pc100_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pc100_pcm1_resource),
-	.resource	  = s5pc100_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-/* AC97 Controller platform devices */
-
-static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s5pc100_ac97_resource[] = {
-	[0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
-	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
-	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
-	[4] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-	.cfg_gpio = s5pc100_ac97_cfg_gpio,
-};
-
-static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_ac97 = {
-	.name		  = "samsung-ac97",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s5pc100_ac97_resource),
-	.resource	  = s5pc100_ac97_resource,
-	.dev = {
-		.platform_data = &s3c_ac97_pdata,
-		.dma_mask = &s5pc100_ac97_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* S/PDIF Controller platform_device */
-static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
-
-	return 0;
-}
-
-static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
-
-	return 0;
-}
-
-static struct resource s5pc100_spdif_resource[] = {
-	[0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPDIF),
-};
-
-static struct s3c_audio_pdata s5p_spdif_pdata = {
-	.cfg_gpio = s5pc100_spdif_cfg_gpd,
-};
-
-static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spdif = {
-	.name		= "samsung-spdif",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5pc100_spdif_resource),
-	.resource	= s5pc100_spdif_resource,
-	.dev = {
-		.platform_data = &s5p_spdif_pdata,
-		.dma_mask = &s5pc100_spdif_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-void __init s5pc100_spdif_setup_gpio(int gpio)
-{
-	if (gpio == S5PC100_SPDIF_GPD)
-		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
-	else
-		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
-}

arch/arm/mach-s5pc100/dma.c

@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 pdma0_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_EXTERNAL,
-	DMACH_PWM,
-	DMACH_SPDIF,
-	DMACH_HSI_RX,
-	DMACH_HSI_TX,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri_id = pdma0_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma0,  "dma-pl330.0", 0x00041330,
-	S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-
-static u8 pdma1_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_PCM0_RX,
-	DMACH_PCM0_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM1_TX,
-	DMACH_MSM_REQ0,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ3,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri_id = pdma1_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
-	S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
-
-static int __init s5pc100_dma_init(void)
-{
-	dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
-	amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
-
-	dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
-	amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
-
-	return 0;
-}
-arch_initcall(s5pc100_dma_init);

arch/arm/mach-s5pc100/include/mach/debug-macro.S

@@ -1,39 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- *
- * Based on mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>

arch/arm/mach-s5pc100/include/mach/dma.h

@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */

arch/arm/mach-s5pc100/include/mach/entry-macro.S

@@ -1,19 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for the Samsung S5PC1XX series
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-	.macro	get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	.endm

arch/arm/mach-s5pc100/include/mach/gpio.h

@@ -1,144 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO lib support
- *
- * Base on mach-s3c6400/include/mach/gpio.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-#define S5PC100_GPIO_A0_NR	(8)
-#define S5PC100_GPIO_A1_NR	(5)
-#define S5PC100_GPIO_B_NR	(8)
-#define S5PC100_GPIO_C_NR	(5)
-#define S5PC100_GPIO_D_NR	(7)
-#define S5PC100_GPIO_E0_NR	(8)
-#define S5PC100_GPIO_E1_NR	(6)
-#define S5PC100_GPIO_F0_NR	(8)
-#define S5PC100_GPIO_F1_NR	(8)
-#define S5PC100_GPIO_F2_NR	(8)
-#define S5PC100_GPIO_F3_NR	(4)
-#define S5PC100_GPIO_G0_NR	(8)
-#define S5PC100_GPIO_G1_NR	(3)
-#define S5PC100_GPIO_G2_NR	(7)
-#define S5PC100_GPIO_G3_NR	(7)
-#define S5PC100_GPIO_H0_NR	(8)
-#define S5PC100_GPIO_H1_NR	(8)
-#define S5PC100_GPIO_H2_NR	(8)
-#define S5PC100_GPIO_H3_NR	(8)
-#define S5PC100_GPIO_I_NR	(8)
-#define S5PC100_GPIO_J0_NR	(8)
-#define S5PC100_GPIO_J1_NR	(5)
-#define S5PC100_GPIO_J2_NR	(8)
-#define S5PC100_GPIO_J3_NR	(8)
-#define S5PC100_GPIO_J4_NR	(4)
-#define S5PC100_GPIO_K0_NR	(8)
-#define S5PC100_GPIO_K1_NR	(6)
-#define S5PC100_GPIO_K2_NR	(8)
-#define S5PC100_GPIO_K3_NR	(8)
-#define S5PC100_GPIO_L0_NR	(8)
-#define S5PC100_GPIO_L1_NR	(8)
-#define S5PC100_GPIO_L2_NR	(8)
-#define S5PC100_GPIO_L3_NR	(8)
-#define S5PC100_GPIO_L4_NR	(8)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5PC100_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5PC100_GPIO_A0_START	= 0,
-	S5PC100_GPIO_A1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
-	S5PC100_GPIO_B_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
-	S5PC100_GPIO_C_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
-	S5PC100_GPIO_D_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
-	S5PC100_GPIO_E0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
-	S5PC100_GPIO_E1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
-	S5PC100_GPIO_F0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
-	S5PC100_GPIO_F1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
-	S5PC100_GPIO_F2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
-	S5PC100_GPIO_F3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
-	S5PC100_GPIO_G0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
-	S5PC100_GPIO_G1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
-	S5PC100_GPIO_G2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
-	S5PC100_GPIO_G3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
-	S5PC100_GPIO_H0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
-	S5PC100_GPIO_H1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
-	S5PC100_GPIO_H2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
-	S5PC100_GPIO_H3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
-	S5PC100_GPIO_I_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
-	S5PC100_GPIO_J0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
-	S5PC100_GPIO_J1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
-	S5PC100_GPIO_J2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
-	S5PC100_GPIO_J3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
-	S5PC100_GPIO_J4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
-	S5PC100_GPIO_K0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
-	S5PC100_GPIO_K1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
-	S5PC100_GPIO_K2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
-	S5PC100_GPIO_K3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
-	S5PC100_GPIO_L0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
-	S5PC100_GPIO_L1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
-	S5PC100_GPIO_L2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
-	S5PC100_GPIO_L3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
-	S5PC100_GPIO_L4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
-	S5PC100_GPIO_END	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
-};
-
-/* S5PC100 GPIO number definitions. */
-#define S5PC100_GPA0(_nr)	(S5PC100_GPIO_A0_START + (_nr))
-#define S5PC100_GPA1(_nr)	(S5PC100_GPIO_A1_START + (_nr))
-#define S5PC100_GPB(_nr)	(S5PC100_GPIO_B_START + (_nr))
-#define S5PC100_GPC(_nr)	(S5PC100_GPIO_C_START + (_nr))
-#define S5PC100_GPD(_nr)	(S5PC100_GPIO_D_START + (_nr))
-#define S5PC100_GPE0(_nr)	(S5PC100_GPIO_E0_START + (_nr))
-#define S5PC100_GPE1(_nr)	(S5PC100_GPIO_E1_START + (_nr))
-#define S5PC100_GPF0(_nr)	(S5PC100_GPIO_F0_START + (_nr))
-#define S5PC100_GPF1(_nr)	(S5PC100_GPIO_F1_START + (_nr))
-#define S5PC100_GPF2(_nr)	(S5PC100_GPIO_F2_START + (_nr))
-#define S5PC100_GPF3(_nr)	(S5PC100_GPIO_F3_START + (_nr))
-#define S5PC100_GPG0(_nr)	(S5PC100_GPIO_G0_START + (_nr))
-#define S5PC100_GPG1(_nr)	(S5PC100_GPIO_G1_START + (_nr))
-#define S5PC100_GPG2(_nr)	(S5PC100_GPIO_G2_START + (_nr))
-#define S5PC100_GPG3(_nr)	(S5PC100_GPIO_G3_START + (_nr))
-#define S5PC100_GPH0(_nr)	(S5PC100_GPIO_H0_START + (_nr))
-#define S5PC100_GPH1(_nr)	(S5PC100_GPIO_H1_START + (_nr))
-#define S5PC100_GPH2(_nr)	(S5PC100_GPIO_H2_START + (_nr))
-#define S5PC100_GPH3(_nr)	(S5PC100_GPIO_H3_START + (_nr))
-#define S5PC100_GPI(_nr)	(S5PC100_GPIO_I_START + (_nr))
-#define S5PC100_GPJ0(_nr)	(S5PC100_GPIO_J0_START + (_nr))
-#define S5PC100_GPJ1(_nr)	(S5PC100_GPIO_J1_START + (_nr))
-#define S5PC100_GPJ2(_nr)	(S5PC100_GPIO_J2_START + (_nr))
-#define S5PC100_GPJ3(_nr)	(S5PC100_GPIO_J3_START + (_nr))
-#define S5PC100_GPJ4(_nr)	(S5PC100_GPIO_J4_START + (_nr))
-#define S5PC100_GPK0(_nr)	(S5PC100_GPIO_K0_START + (_nr))
-#define S5PC100_GPK1(_nr)	(S5PC100_GPIO_K1_START + (_nr))
-#define S5PC100_GPK2(_nr)	(S5PC100_GPIO_K2_START + (_nr))
-#define S5PC100_GPK3(_nr)	(S5PC100_GPIO_K3_START + (_nr))
-#define S5PC100_GPL0(_nr)	(S5PC100_GPIO_L0_START + (_nr))
-#define S5PC100_GPL1(_nr)	(S5PC100_GPIO_L1_START + (_nr))
-#define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
-#define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
-#define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
-
-/* It used the end of the S5PC100 gpios */
-#define S3C_GPIO_END		S5PC100_GPIO_END
-
-/* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */

arch/arm/mach-s5pc100/include/mach/hardware.h

@@ -1,14 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-s5pc100/include/mach/irqs.h

@@ -1,115 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0: system, DMA, timer */
-#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
-#define IRQ_BATF		S5P_IRQ_VIC0(17)
-#define IRQ_MDMA		S5P_IRQ_VIC0(18)
-#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
-#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
-#define IRQ_WDT			S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
-
-/* VIC1: ARM, power, memory, connectivity */
-#define IRQ_PMU			S5P_IRQ_VIC1(0)
-#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
-#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
-#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
-#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
-#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
-#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
-#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
-#define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFCON		S5P_IRQ_VIC1(9)
-#define IRQ_UART0		S5P_IRQ_VIC1(10)
-#define IRQ_UART1		S5P_IRQ_VIC1(11)
-#define IRQ_UART2		S5P_IRQ_VIC1(12)
-#define IRQ_UART3		S5P_IRQ_VIC1(13)
-#define IRQ_IIC			S5P_IRQ_VIC1(14)
-#define IRQ_SPI0		S5P_IRQ_VIC1(15)
-#define IRQ_SPI1		S5P_IRQ_VIC1(16)
-#define IRQ_SPI2		S5P_IRQ_VIC1(17)
-#define IRQ_IRDA		S5P_IRQ_VIC1(18)
-#define IRQ_IIC2		S5P_IRQ_VIC1(19)
-#define IRQ_IIC3		S5P_IRQ_VIC1(20)
-#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
-#define IRQ_HSITX		S5P_IRQ_VIC1(22)
-#define IRQ_UHOST		S5P_IRQ_VIC1(23)
-#define IRQ_OTG			S5P_IRQ_VIC1(24)
-#define IRQ_MSM			S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
-#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
-
-/* VIC2: multimedia, audio, security */
-#define IRQ_LCD0		S5P_IRQ_VIC2(0)
-#define IRQ_LCD1		S5P_IRQ_VIC2(1)
-#define IRQ_LCD2		S5P_IRQ_VIC2(2)
-#define IRQ_LCD3		S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
-#define IRQ_JPEG		S5P_IRQ_VIC2(8)
-#define IRQ_2D			S5P_IRQ_VIC2(9)
-#define IRQ_3D			S5P_IRQ_VIC2(10)
-#define IRQ_MIXER		S5P_IRQ_VIC2(11)
-#define IRQ_HDMI		S5P_IRQ_VIC2(12)
-#define IRQ_IIC1		S5P_IRQ_VIC2(13)
-#define IRQ_MFC			S5P_IRQ_VIC2(14)
-#define IRQ_TVENC		S5P_IRQ_VIC2(15)
-#define IRQ_I2S0		S5P_IRQ_VIC2(16)
-#define IRQ_I2S1		S5P_IRQ_VIC2(17)
-#define IRQ_I2S2		S5P_IRQ_VIC2(18)
-#define IRQ_AC97		S5P_IRQ_VIC2(19)
-#define IRQ_PCM0		S5P_IRQ_VIC2(20)
-#define IRQ_PCM1		S5P_IRQ_VIC2(21)
-#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
-#define IRQ_ADC			S5P_IRQ_VIC2(23)
-#define IRQ_PENDN		S5P_IRQ_VIC2(24)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
-#define IRQ_CG			S5P_IRQ_VIC2(26)
-#define IRQ_SEC			S5P_IRQ_VIC2(27)
-#define IRQ_SECRX		S5P_IRQ_VIC2(28)
-#define IRQ_SECTX		S5P_IRQ_VIC2(29)
-#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
-#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
-#define IRQ_VIC_END		S5P_IRQ_VIC2(31)
-
-#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
-
-/* GPIO interrupt */
-#define S5P_GPIOINT_BASE	(IRQ_EINT(31) + 1)
-#define S5P_GPIOINT_GROUP_MAXNR	21
-
-/* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
-
-/* Compatibility */
-#define IRQ_LCD_FIFO		IRQ_LCD0
-#define IRQ_LCD_VSYNC		IRQ_LCD1
-#define IRQ_LCD_SYSTEM		IRQ_LCD2
-
-#endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-s5pc100/include/mach/map.h

@@ -1,137 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/map.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5PC100_PA_SDRAM		0x20000000
-
-#define S5PC100_PA_ONENAND		0xE7100000
-#define S5PC100_PA_ONENAND_BUF		0xB0000000
-
-#define S5PC100_PA_CHIPID		0xE0000000
-
-#define S5PC100_PA_SYSCON		0xE0100000
-
-#define S5PC100_PA_OTHERS		0xE0200000
-
-#define S5PC100_PA_GPIO			0xE0300000
-
-#define S5PC100_PA_VIC0			0xE4000000
-#define S5PC100_PA_VIC1			0xE4100000
-#define S5PC100_PA_VIC2			0xE4200000
-
-#define S5PC100_PA_SROMC		0xE7000000
-
-#define S5PC100_PA_CFCON		0xE7800000
-
-#define S5PC100_PA_MDMA			0xE8100000
-#define S5PC100_PA_PDMA0		0xE9000000
-#define S5PC100_PA_PDMA1		0xE9200000
-
-#define S5PC100_PA_TIMER		0xEA000000
-#define S5PC100_PA_SYSTIMER		0xEA100000
-#define S5PC100_PA_WATCHDOG		0xEA200000
-#define S5PC100_PA_RTC			0xEA300000
-
-#define S5PC100_PA_UART			0xEC000000
-
-#define S5PC100_PA_IIC0			0xEC100000
-#define S5PC100_PA_IIC1			0xEC200000
-
-#define S5PC100_PA_SPI0			0xEC300000
-#define S5PC100_PA_SPI1			0xEC400000
-#define S5PC100_PA_SPI2			0xEC500000
-
-#define S5PC100_PA_USB_HSOTG		0xED200000
-#define S5PC100_PA_USB_HSPHY		0xED300000
-
-#define S5PC100_PA_HSMMC(x)		(0xED800000 + ((x) * 0x100000))
-
-#define S5PC100_PA_FB			0xEE000000
-
-#define S5PC100_PA_FIMC0		0xEE200000
-#define S5PC100_PA_FIMC1		0xEE300000
-#define S5PC100_PA_FIMC2		0xEE400000
-
-#define S5PC100_PA_I2S0			0xF2000000
-#define S5PC100_PA_I2S1			0xF2100000
-#define S5PC100_PA_I2S2			0xF2200000
-
-#define S5PC100_PA_AC97			0xF2300000
-
-#define S5PC100_PA_PCM0			0xF2400000
-#define S5PC100_PA_PCM1			0xF2500000
-
-#define S5PC100_PA_SPDIF		0xF2600000
-
-#define S5PC100_PA_TSADC		0xF3000000
-
-#define S5PC100_PA_KEYPAD		0xF3100000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_FB			S5PC100_PA_FB
-#define S3C_PA_HSMMC0			S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1			S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2			S5PC100_PA_HSMMC(2)
-#define S3C_PA_IIC			S5PC100_PA_IIC0
-#define S3C_PA_IIC1			S5PC100_PA_IIC1
-#define S3C_PA_KEYPAD			S5PC100_PA_KEYPAD
-#define S3C_PA_ONENAND			S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF		S5PC100_PA_ONENAND_BUF
-#define S3C_PA_RTC			S5PC100_PA_RTC
-#define S3C_PA_TSADC			S5PC100_PA_TSADC
-#define S3C_PA_USB_HSOTG		S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY		S5PC100_PA_USB_HSPHY
-#define S3C_PA_WDT			S5PC100_PA_WATCHDOG
-#define S3C_PA_SPI0			S5PC100_PA_SPI0
-#define S3C_PA_SPI1			S5PC100_PA_SPI1
-#define S3C_PA_SPI2			S5PC100_PA_SPI2
-
-#define S5P_PA_CHIPID			S5PC100_PA_CHIPID
-#define S5P_PA_FIMC0			S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1			S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2			S5PC100_PA_FIMC2
-#define S5P_PA_SDRAM			S5PC100_PA_SDRAM
-#define S5P_PA_SROMC			S5PC100_PA_SROMC
-#define S5P_PA_SYSCON			S5PC100_PA_SYSCON
-#define S5P_PA_TIMER			S5PC100_PA_TIMER
-
-#define SAMSUNG_PA_ADC			S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON		S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD		S5PC100_PA_KEYPAD
-#define SAMSUNG_PA_TIMER		S5PC100_PA_TIMER
-
-#define S5PC100_VA_OTHERS		(S3C_VA_SYS + 0x10000)
-
-#define S3C_SZ_ONENAND_BUF		(SZ_256M - SZ_32M)
-
-/* UART */
-
-#define S3C_PA_UART			S5PC100_PA_UART
-
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0			S5P_PA_UART(0)
-#define S5P_PA_UART1			S5P_PA_UART(1)
-#define S5P_PA_UART2			S5P_PA_UART(2)
-#define S5P_PA_UART3			S5P_PA_UART(3)
-
-#define S5P_SZ_UART			SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s5pc100/include/mach/regs-clock.h

@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PC100 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5PC100_REG_OTHERS(x)	(S5PC100_VA_OTHERS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_HPLL_LOCK		S5P_CLKREG(0x0C)
-
-#define S5P_APLL_CON		S5P_CLKREG(0x100)
-#define S5P_MPLL_CON		S5P_CLKREG(0x104)
-#define S5P_EPLL_CON		S5P_CLKREG(0x108)
-#define S5P_HPLL_CON		S5P_CLKREG(0x10C)
-
-#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
-
-#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
-
-#define S5P_CLK_OUT		S5P_CLKREG(0x400)
-
-#define S5P_CLKGATE_D00		S5P_CLKREG(0x500)
-#define S5P_CLKGATE_D01		S5P_CLKREG(0x504)
-#define S5P_CLKGATE_D02		S5P_CLKREG(0x508)
-
-#define S5P_CLKGATE_D10		S5P_CLKREG(0x520)
-#define S5P_CLKGATE_D11		S5P_CLKREG(0x524)
-#define S5P_CLKGATE_D12		S5P_CLKREG(0x528)
-#define S5P_CLKGATE_D13		S5P_CLKREG(0x52C)
-#define S5P_CLKGATE_D14		S5P_CLKREG(0x530)
-#define S5P_CLKGATE_D15		S5P_CLKREG(0x534)
-
-#define S5P_CLKGATE_D20		S5P_CLKREG(0x540)
-
-#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x560)
-#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x564)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_D0_MASK		(0x7<<8)
-#define S5P_CLKDIV0_D0_SHIFT		(8)
-#define S5P_CLKDIV0_PCLKD0_MASK		(0x7<<12)
-#define S5P_CLKDIV0_PCLKD0_SHIFT	(12)
-
-/* CLKDIV1 */
-#define S5P_CLKDIV1_D1_MASK		(0x7<<12)
-#define S5P_CLKDIV1_D1_SHIFT		(12)
-#define S5P_CLKDIV1_PCLKD1_MASK		(0x7<<16)
-#define S5P_CLKDIV1_PCLKD1_SHIFT	(16)
-
-#define S5PC100_SWRESET		S5PC100_REG_OTHERS(0x000)
-#define S5PC100_MEM_SYS_CFG	S5PC100_REG_OTHERS(0x200)
-
-#define S5PC100_SWRESET_RESETVAL	0xc100
-
-#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */

arch/arm/mach-s5pc100/include/mach/regs-gpio.h

@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO register definitions
- */
-
-#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
-#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PC100EINT30CON		(S5P_VA_GPIO + 0xE00)
-#define S5P_EINT_CON(x)			(S5PC100EINT30CON + ((x) * 0x4))
-
-#define S5PC100EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
-#define S5P_EINT_FLTCON(x)		(S5PC100EINT30FLTCON0 + ((x) * 0x4))
-
-#define S5PC100EINT30MASK		(S5P_VA_GPIO + 0xF00)
-#define S5P_EINT_MASK(x)		(S5PC100EINT30MASK + ((x) * 0x4))
-
-#define S5PC100EINT30PEND		(S5P_VA_GPIO + 0xF40)
-#define S5P_EINT_PEND(x)		(S5PC100EINT30PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE		S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
-#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
-#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
-#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
-
-#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
-

arch/arm/mach-s5pc100/include/mach/regs-irq.h

@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */

arch/arm/mach-s5pc100/mach-smdkc100.c

@@ -1,264 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Author: Byungho Min <bhmin@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/gpio-cfg.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/adc.h>
-#include <plat/keypad.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/asoc-s3c.h>
-#include <plat/backlight.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC100_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S3C2440_UFCON_RXTRIG8 |	\
-				 S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{I2C_BOARD_INFO("wm8580", 0x1b),},
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c_devs1[] __initdata = {
-};
-
-/* LCD power controller */
-static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		/* module reset */
-		gpio_direction_output(S5PC100_GPH0(6), 1);
-		mdelay(100);
-		gpio_direction_output(S5PC100_GPH0(6), 0);
-		mdelay(10);
-		gpio_direction_output(S5PC100_GPH0(6), 1);
-		mdelay(10);
-	}
-}
-
-static struct plat_lcd_data smdkc100_lcd_power_data = {
-	.set_power	= smdkc100_lcd_power_set,
-};
-
-static struct platform_device smdkc100_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdkc100_lcd_power_data,
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdkc100_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode smdkc100_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-	.refresh	= 80,
-};
-
-static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
-	.win[0]		= &smdkc100_fb_win0,
-	.vtiming	= &smdkc100_lcd_timing,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
-};
-
-static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
-	.setup_gpio	= s5pc100_ide_setup_gpio,
-};
-
-static uint32_t smdkc100_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
-	.keymap		= smdkc100_keymap,
-	.keymap_size	= ARRAY_SIZE(smdkc100_keymap),
-};
-
-static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
-	.keymap_data	= &smdkc100_keymap_data,
-	.rows		= 2,
-	.cols		= 8,
-};
-
-static struct platform_device *smdkc100_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_cfcon,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&samsung_device_pwm,
-	&s3c_device_ts,
-	&s3c_device_wdt,
-	&smdkc100_lcd_powerdev,
-	&s5pc100_device_iis0,
-	&samsung_device_keypad,
-	&s5pc100_device_ac97,
-	&s3c_device_rtc,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5pc100_device_spdif,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
-	.no = S5PC100_GPD(0),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc100_bl_data = {
-	.pwm_id = 0,
-	.enable_gpio = -1,
-};
-
-static void __init smdkc100_map_io(void)
-{
-	s5pc100_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
-	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdkc100_machine_init(void)
-{
-	s3c24xx_ts_set_platdata(NULL);
-
-	/* I2C */
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
-	s3c_ide_set_platdata(&smdkc100_ide_pdata);
-
-	samsung_keypad_set_platdata(&smdkc100_keypad_data);
-
-	s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
-
-	/* LCD init */
-	gpio_request(S5PC100_GPH0(6), "GPH0");
-	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
-
-	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
-
-	samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-}
-
-MACHINE_START(SMDKC100, "SMDKC100")
-	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s5pc100_init_irq,
-	.map_io		= smdkc100_map_io,
-	.init_machine	= smdkc100_machine_init,
-	.init_time	= samsung_timer_init,
-	.restart	= s5pc100_restart,
-MACHINE_END

arch/arm/mach-s5pc100/setup-fb-24bpp.c

@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC100 setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#define DISR_OFFSET	0x7008
-
-static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
-{
-	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
-}
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
-	s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
-	s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
-	s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
-	s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
-}

arch/arm/mach-s5pc100/setup-i2c0.c

@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}

arch/arm/mach-s5pc100/setup-i2c1.c

@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}

arch/arm/mach-s5pc100/setup-ide.c

@@ -1,57 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PC100 setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-
-static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
-{
-	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
-
-	for (; nr > 0; nr--, base++)
-		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-void s5pc100_ide_setup_gpio(void)
-{
-	u32 reg;
-
-	/* Independent CF interface, CF chip select configuration */
-	reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
-	writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
-
-	/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
-
-	/*CF_Data[0 - 7] */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
-
-	/* CF_Data[8 - 15] */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
-
-	/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
-
-	/* EBI_OE, EBI_WE */
-	s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
-
-	/* CF_OE, CF_WE */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
-
-	/* CF_CD */
-	s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
-}

arch/arm/mach-s5pc100/setup-keypad.c

@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-keypad.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * GPIO configuration for S5PC100 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
-	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
-
-	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
-}

arch/arm/mach-s5pc100/setup-sdhci-gpio.c

@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
- *
- * Copyright 2009 Samsung Eletronics
- *
- * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int num;
-
-	num = width;
-	/* In case of 8 width, we should decrease the 2 */
-	if (width == 8)
-		num = width - 2;
-
-	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
-
-	if (width == 8)
-		s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
-	}
-}
-
-void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG2 pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
-	}
-}
-
-void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG3 pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
-	}
-}

arch/arm/mach-s5pc100/setup-spi.c

@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-int s3c64xx_spi2_cfg_gpio(void)
-{
-	s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
-	s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
-				S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif

arch/arm/plat-samsung/Kconfig

@@ -15,7 +15,7 @@ config PLAT_SAMSUNG
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5PC100 || ARCH_S5PV210)
+	depends on ARCH_S5PV210
 	default y
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
@@ -78,14 +78,14 @@ config SAMSUNG_CLKSRC
 	  used by newer systems such as the S3C64XX.
 
 config S5P_CLOCK
-	def_bool (ARCH_S5PC100 || ARCH_S5PV210)
+	def_bool ARCH_S5PV210
 	help
 	  Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
 
 # options for IRQ support
 
 config S5P_IRQ
-	def_bool (ARCH_S5PC100 || ARCH_S5PV210)
+	def_bool ARCH_S5PV210
 	help
 	  Support common interrupt part for ARCH_S5P SoCs
 
@@ -142,7 +142,7 @@ config S3C_GPIO_TRACK
 
 config S5P_DEV_UART
 	def_bool y
-	depends on (ARCH_S5PC100 || ARCH_S5PV210)
+	depends on ARCH_S5PV210
 
 # ADC driver
 
@@ -396,7 +396,7 @@ config SAMSUNG_PM_GPIO
 
 config SAMSUNG_DMADEV
 	bool "Use legacy Samsung DMA abstraction"
-	depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S3C64XX
+	depends on CPU_S5PV210 || ARCH_S3C64XX
 	select DMADEVICES
 	default y
 	help

arch/arm/plat-samsung/adc.c

@@ -43,7 +43,7 @@ enum s3c_cpu_type {
 	TYPE_ADCV1, /* S3C24XX */
 	TYPE_ADCV11, /* S3C2443 */
 	TYPE_ADCV12, /* S3C2416, S3C2450 */
-	TYPE_ADCV2, /* S3C64XX, S5PC100 */
+	TYPE_ADCV2, /* S3C64XX */
 	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
 };
 

arch/arm/plat-samsung/include/plat/cpu.h

@@ -33,9 +33,6 @@ extern unsigned long samsung_cpu_id;
 #define S3C6410_CPU_ID		0x36410000
 #define S3C64XX_CPU_MASK	0xFFFFF000
 
-#define S5PC100_CPU_ID		0x43100000
-#define S5PC100_CPU_MASK	0xFFFFF000
-
 #define S5PV210_CPU_ID		0x43110000
 #define S5PV210_CPU_MASK	0xFFFFF000
 
@@ -50,7 +47,6 @@ IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
 IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
@@ -80,12 +76,6 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 # define soc_is_s3c64xx()	0
 #endif
 
-#if defined(CONFIG_CPU_S5PC100)
-# define soc_is_s5pc100()	is_samsung_s5pc100()
-#else
-# define soc_is_s5pc100()	0
-#endif
-
 #if defined(CONFIG_CPU_S5PV210)
 # define soc_is_s5pv210()	is_samsung_s5pv210()
 #else

arch/arm/plat-samsung/include/plat/devs.h

@@ -94,14 +94,6 @@ extern struct platform_device s5p_device_mixer;
 extern struct platform_device s5p_device_onenand;
 extern struct platform_device s5p_device_sdo;
 
-extern struct platform_device s5pc100_device_ac97;
-extern struct platform_device s5pc100_device_iis0;
-extern struct platform_device s5pc100_device_iis1;
-extern struct platform_device s5pc100_device_iis2;
-extern struct platform_device s5pc100_device_pcm0;
-extern struct platform_device s5pc100_device_pcm1;
-extern struct platform_device s5pc100_device_spdif;
-
 extern struct platform_device s5pv210_device_ac97;
 extern struct platform_device s5pv210_device_iis0;
 extern struct platform_device s5pv210_device_iis1;

arch/arm/plat-samsung/include/plat/fb.h

@@ -40,13 +40,6 @@ extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
-/**
- * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pc100_fb_gpio_setup_24bpp(void);
-
 /**
  * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
  *

arch/arm/plat-samsung/include/plat/s5p-clock.h

@@ -57,7 +57,7 @@ extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
 extern int s5p_epll_enable(struct clk *clk, int enable);
 extern unsigned long s5p_epll_get_rate(struct clk *clk);
 
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
+/* SPDIF clk operations common for S5PV210/C110 and Exynos4 */
 extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
 extern unsigned long s5p_spdif_get_rate(struct clk *clk);
 

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -56,9 +56,6 @@ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
@@ -147,37 +144,6 @@ static inline void s3c6400_default_sdhci2(void) { }
 
 #endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
-/* S5PC100 SDHCI setup */
-
-#ifdef CONFIG_S5PC100_SETUP_SDHCI
-static inline void s5pc100_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-static inline void s5pc100_default_sdhci1(void) { }
-static inline void s5pc100_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
 /* S5PV210 SDHCI setup */
 
 #ifdef CONFIG_S5PV210_SETUP_SDHCI

drivers/irqchip/Kconfig

@@ -23,7 +23,6 @@ config ARM_VIC
 config ARM_VIC_NR
 	int
 	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5PC100
 	default 2
 	depends on ARM_VIC
 	help