Merge tag 'v3.13' into for-3.15

Linux 3.13

Conflicts:
	include/net/xfrm.h

Simple merge where v3.13 removed 'extern' from definitions and the audit
tree did s/u32/unsigned int/ to the same definitions.

CREDITS

@@ -655,6 +655,11 @@ S: Stanford University
 S: Stanford, California 94305
 S: USA
 
+N: Carlos Chinea
+E: carlos.chinea@nokia.com
+E: cch.devel@gmail.com
+D: Author of HSI Subsystem
+
 N: Randolph Chung
 E: tausq@debian.org
 D: Linux/PA-RISC hacker
@@ -2576,7 +2581,7 @@ S: Toronto, Ontario
 S: Canada
 
 N: Zwane Mwaikambo
-E: zwane@arm.linux.org.uk
+E: zwanem@gmail.com
 D: Various driver hacking
 D: Lowlevel x86 kernel hacking
 D: General debugging
@@ -2895,6 +2900,11 @@ S: Framewood Road
 S: Wexham SL3 6PJ
 S: United Kingdom
 
+N: Richard Purdie
+E: rpurdie@rpsys.net
+D: Backlight subsystem maintainer
+S: United Kingdom
+
 N: Daniel Quinlan
 E: quinlan@pathname.com
 W: http://www.pathname.com/~quinlan/
@@ -3152,6 +3162,11 @@ N: Dipankar Sarma
 E: dipankar@in.ibm.com
 D: RCU
 
+N: Yoshinori Sato
+E: ysato@users.sourceforge.jp
+D: uClinux for Renesas H8/300 (H8300)
+D: http://uclinux-h8.sourceforge.jp/
+
 N: Hannu Savolainen
 E: hannu@opensound.com
 D: Maintainer of the sound drivers until 2.1.x days.

Documentation/ABI/README

@@ -72,3 +72,16 @@ kernel tree without going through the obsolete state first.
 
 It's up to the developer to place their interfaces in the category they
 wish for it to start out in.
+
+
+Notable bits of non-ABI, which should not under any circumstances be considered
+stable:
+
+- Kconfig.  Userspace should not rely on the presence or absence of any
+  particular Kconfig symbol, in /proc/config.gz, in the copy of .config
+  commonly installed to /boot, or in any invocation of the kernel build
+  process.
+
+- Kernel-internal symbols.  Do not rely on the presence, absence, location, or
+  type of any kernel symbol, either in System.map files or the kernel binary
+  itself.  See Documentation/stable_api_nonsense.txt.

Documentation/ABI/stable/sysfs-driver-ib_srp

@@ -61,6 +61,12 @@ Description:	Interface for making ib_srp connect to a new target.
 		  interrupt is handled by a different CPU then the comp_vector
 		  parameter can be used to spread the SRP completion workload
 		  over multiple CPU's.
+		* tl_retry_count, a number in the range 2..7 specifying the
+		  IB RC retry count.
+		* queue_size, the maximum number of commands that the
+		  initiator is allowed to queue per SCSI host. The default
+		  value for this parameter is 62. The lowest supported value
+		  is 2.
 
 What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
 Date:		January 2, 2006
@@ -153,6 +159,13 @@ Contact:	linux-rdma@vger.kernel.org
 Description:	InfiniBand service ID used for establishing communication with
 		the SRP	target.
 
+What:		/sys/class/scsi_host/host<n>/sgid
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand GID of the source port used for communication with
+		the SRP target.
+
 What:		/sys/class/scsi_host/host<n>/zero_req_lim
 Date:		September 20, 2006
 KernelVersion:	2.6.18

Documentation/ABI/stable/sysfs-transport-srp

@@ -5,6 +5,24 @@ Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
 Description:	Instructs an SRP initiator to disconnect from a target and to
 		remove all LUNs imported from that target.
 
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before removing a target port.
+		Zero means immediate removal. Setting this attribute to "off"
+		will disable the dev_loss timer.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before failing I/O. Zero means
+		failing I/O immediately. Setting this attribute to "off" will
+		disable the fast_io_fail timer.
+
 What:		/sys/class/srp_remote_ports/port-<h>:<n>/port_id
 Date:		June 27, 2007
 KernelVersion:	2.6.24
@@ -12,8 +30,29 @@ Contact:	linux-scsi@vger.kernel.org
 Description:	16-byte local SRP port identifier in hexadecimal format. An
 		example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
 
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a reconnect
+		attempt failed before retrying. Setting this attribute to
+		"off" will disable time-based reconnecting.
+
 What:		/sys/class/srp_remote_ports/port-<h>:<n>/roles
 Date:		June 27, 2007
 KernelVersion:	2.6.24
 Contact:	linux-scsi@vger.kernel.org
 Description:	Role of the remote port. Either "SRP Initiator" or "SRP Target".
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/state
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	State of the transport layer used for communication with the
+		remote port. "running" if the transport layer is operational;
+		"blocked" if a transport layer error has been encountered but
+		the fast_io_fail_tmo timer has not yet fired; "fail-fast"
+		after the fast_io_fail_tmo timer has fired and before the
+		"dev_loss_tmo" timer has fired; "lost" after the
+		"dev_loss_tmo" timer has fired and before the port is finally
+		removed.

Documentation/ABI/testing/configfs-usb-gadget-mass-storage

@@ -0,0 +1,31 @@
+What:		/config/usb-gadget/gadget/functions/mass_storage.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		stall		- Set to permit function to halt bulk endpoints.
+				Disabled on some USB devices known not to work
+				correctly. You should set it to true.
+		num_buffers	- Number of pipeline buffers. Valid numbers
+				are 2..4. Available only if
+				CONFIG_USB_GADGET_DEBUG_FILES is set.
+
+What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		file		- The path to the backing file for the LUN.
+				Required if LUN is not marked as removable.
+		ro		- Flag specifying access to the LUN shall be
+				read-only. This is implied if CD-ROM emulation
+				is enabled as well as when it was impossible
+				to open "filename" in R/W mode.
+		removable	- Flag specifying that LUN shall be indicated as
+				being removable.
+		cdrom		- Flag specifying that LUN shall be reported as
+				being a CD-ROM.
+		nofua		- Flag specifying that FUA flag
+				in SCSI WRITE(10,12)

Documentation/ABI/testing/sysfs-bus-iio

@@ -79,7 +79,7 @@ Description:
 		correspond to externally available input one of the named
 		versions may be used. The number must always be specified and
 		unique to allow association with event codes. Units after
-		application of scale and offset are microvolts.
+		application of scale and offset are millivolts.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
 KernelVersion:	2.6.35
@@ -90,7 +90,7 @@ Description:
 		physically equivalent inputs when non differential readings are
 		separately available. In differential only parts, then all that
 		is required is a consistent labeling.  Units after application
-		of scale and offset are microvolts.
+		of scale and offset are millivolts.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
 KernelVersion:	3.2
@@ -537,6 +537,62 @@ Description:
 		value is in raw device units or in processed units (as _raw
 		and _input do on sysfs direct channel read attributes).
 
+What:		/sys/.../events/in_accel_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_x_thresh_either_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_y_thresh_either_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_accel_z_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_x_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_y_thresh_either_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_anglvel_z_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_x_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_y_thresh_either_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_rising_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_falling_hysteresis
+What:		/sys/.../events/in_magn_z_thresh_either_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_rising_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_falling_hysteresis
+What:		/sys/.../events/in_voltageY_thresh_either_hysteresis
+What:		/sys/.../events/in_tempY_thresh_rising_hysteresis
+What:		/sys/.../events/in_tempY_thresh_falling_hysteresis
+What:		/sys/.../events/in_tempY_thresh_either_hysteresis
+What:		/sys/.../events/in_illuminance0_thresh_falling_hysteresis
+what:		/sys/.../events/in_illuminance0_thresh_rising_hysteresis
+what:		/sys/.../events/in_illuminance0_thresh_either_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_falling_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_rising_hysteresis
+what:		/sys/.../events/in_proximity0_thresh_either_hysteresis
+KernelVersion:	3.13
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the hysteresis of threshold that the device is comparing
+		against for the events enabled by
+		<type>Y[_name]_thresh[_(rising|falling)]_hysteresis.
+		If separate attributes exist for the two directions, but
+		direction is not specified for this attribute, then a single
+		hysteresis value applies to both directions.
+		For falling events the hysteresis is added to the _value attribute for
+		this event to get the upper threshold for when the event goes back to
+		normal, for rising events the hysteresis is subtracted from the _value
+		attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
+		and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
+		will get activated once in_voltage0_raw goes above 1200 and will become
+		deactived again once the value falls below 1150.
+
 What:		/sys/.../events/in_accel_x_raw_roc_rising_value
 What:		/sys/.../events/in_accel_x_raw_roc_falling_value
 What:		/sys/.../events/in_accel_y_raw_roc_rising_value
@@ -811,3 +867,14 @@ Description:
 		Writing '1' stores the current device configuration into
 		on-chip EEPROM. After power-up or chip reset the device will
 		automatically load the saved configuration.
+
+What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_clear_integration_time
+What:		/sys/.../iio:deviceX/in_illuminance_integration_time
+KernelVersion:	3.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to get/set the integration time in
+		seconds.

Documentation/ABI/testing/sysfs-class-mic.txt

@@ -0,0 +1,157 @@
+What:		/sys/class/mic/
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The mic class directory belongs to Intel MIC devices and
+		provides information per MIC device. An Intel MIC device is a
+		PCIe form factor add-in Coprocessor card based on the Intel Many
+		Integrated Core (MIC) architecture that runs a Linux OS.
+
+What:		/sys/class/mic/mic(x)
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The directories /sys/class/mic/mic0, /sys/class/mic/mic1 etc.,
+		represent MIC devices (0,1,..etc). Each directory has
+		information specific to that MIC device.
+
+What:		/sys/class/mic/mic(x)/family
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the Coprocessor family for an Intel
+		MIC device. For example - "x100"
+
+What:		/sys/class/mic/mic(x)/stepping
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the silicon stepping for an Intel
+		MIC device. For example - "A0" or "B0"
+
+What:		/sys/class/mic/mic(x)/state
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this entry provides the current state of an Intel
+		MIC device in the context of the card OS. Possible values that
+		will be read are:
+		"offline" - The MIC device is ready to boot the card OS. On
+		reading this entry after an OSPM resume, a "boot" has to be
+		written to this entry if the card was previously shutdown
+		during OSPM suspend.
+		"online" - The MIC device has initiated booting a card OS.
+		"shutting_down" - The card OS is shutting down.
+		"reset_failed" - The MIC device has failed to reset.
+		"suspending" - The MIC device is currently being prepared for
+		suspend. On reading this entry, a "suspend" has to be written
+		to the state sysfs entry to ensure the card is shutdown during
+		OSPM suspend.
+		"suspended" - The MIC device has been suspended.
+
+		When written, this sysfs entry triggers different state change
+		operations depending upon the current state of the card OS.
+		Acceptable values are:
+		"boot" - Boot the card OS image specified by the combination
+			 of firmware, ramdisk, cmdline and bootmode
+			sysfs entries.
+		"reset" - Initiates device reset.
+		"shutdown" - Initiates card OS shutdown.
+		"suspend" - Initiates card OS shutdown and also marks the card
+		as suspended.
+
+What:		/sys/class/mic/mic(x)/shutdown_status
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. This
+		OS can shutdown because of various reasons. When read, this
+		entry provides the status on why the card OS was shutdown.
+		Possible values are:
+		"nop" -  shutdown status is not applicable, when the card OS is
+			"online"
+		"crashed" - Shutdown because of a HW or SW crash.
+		"halted" - Shutdown because of a halt command.
+		"poweroff" - Shutdown because of a poweroff command.
+		"restart" - Shutdown because of a restart command.
+
+What:		/sys/class/mic/mic(x)/cmdline
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. Before
+		booting this card OS, it is possible to pass kernel command line
+		options to configure various features in it, similar to
+		self-bootable machines. When read, this entry provides
+		information about the current kernel command line options set to
+		boot the card OS. This entry can be written to change the
+		existing kernel command line options. Typically, the user would
+		want to read the current command line options, append new ones
+		or modify existing ones and then write the whole kernel command
+		line back to this entry.
+
+What:		/sys/class/mic/mic(x)/firmware
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the firmware image to be booted on the
+		card can be found. The entry can be written to change the
+		firmware image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic(x)/ramdisk
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the ramdisk image to be used during card
+		OS boot can be found. The entry can be written to change
+		the ramdisk image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic(x)/bootmode
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the current bootmode for
+		the card. This sysfs entry can be written with the following
+		valid strings:
+		a) linux - Boot a Linux image.
+		b) elf - Boot an elf image for flash updates.
+
+What:		/sys/class/mic/mic(x)/log_buf_addr
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address of the buffer where the card
+		OS log buffer can be read. This entry is written by the host
+		configuration daemon to set the log buffer address. The correct
+		log buffer address to be written can be found in the System.map
+		file of the card OS.
+
+What:		/sys/class/mic/mic(x)/log_buf_len
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address where the card OS log buffer
+		length can be read. This entry is written by host configuration
+		daemon to set the log buffer length address. The correct log
+		buffer length address to be written can be found in the
+		System.map file of the card OS.

Documentation/ABI/testing/sysfs-class-mtd

@@ -104,7 +104,7 @@ Description:
 		One of the following ASCII strings, representing the device
 		type:
 
-		absent, ram, rom, nor, nand, dataflash, ubi, unknown
+		absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown
 
 What:		/sys/class/mtd/mtdX/writesize
 Date:		April 2009

Documentation/ABI/testing/sysfs-class-net-batman-adv

@@ -1,13 +1,13 @@
 
 What:           /sys/class/net/<iface>/batman-adv/iface_status
 Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Indicates the status of <iface> as it is seen by batman.
 
 What:           /sys/class/net/<iface>/batman-adv/mesh_iface
 Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 The /sys/class/net/<iface>/batman-adv/mesh_iface file
                 displays the batman mesh interface this <iface>

Documentation/ABI/testing/sysfs-class-net-mesh

@@ -1,22 +1,23 @@
 
 What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
 Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Indicates whether the batman protocol messages of the
                 mesh <mesh_iface> shall be aggregated or not.
 
-What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
 Date:           May 2011
-Contact:        Antonio Quartulli <ordex@autistici.org>
+Contact:        Antonio Quartulli <antonio@meshcoding.com>
 Description:
                 Indicates whether the data traffic going from a
                 wireless client to another wireless client will be
-                silently dropped.
+                silently dropped. <vlan_subdir> is empty when referring
+		to the untagged lan.
 
 What:           /sys/class/net/<mesh_iface>/mesh/bonding
 Date:           June 2010
-Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
 Description:
                 Indicates whether the data traffic going through the
                 mesh will be sent using multiple interfaces at the
@@ -24,7 +25,7 @@ Description:
 
 What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
 Date:           November 2011
-Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
 Description:
                 Indicates whether the bridge loop avoidance feature
                 is enabled. This feature detects and avoids loops
@@ -41,21 +42,21 @@ Description:
 
 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
 Date:           October 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the bandwidth which is propagated by this
                 node if gw_mode was set to 'server'.
 
 What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
 Date:           October 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the state of the gateway features. Can be
                 either 'off', 'client' or 'server'.
 
 What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
 Date:           October 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the selection criteria this node will use
                 to choose a gateway if gw_mode was set to 'client'.
@@ -77,25 +78,14 @@ Description:
 
 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
 Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the interval in milliseconds in which batman
                 sends its protocol messages.
 
 What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
 Date:           Dec 2011
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
 Description:
                 Defines the routing procotol this mesh instance
                 uses to find the optimal paths through the mesh.
-
-What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
-Date:           May 2010
-Contact:        Marek Lindner <lindner_marek@yahoo.de>
-Description:
-                Each batman node only maintains information about its
-                own local neighborhood, therefore generating graphs
-                showing the topology of the entire mesh is not easily
-                feasible without having a central instance to collect
-                the local topologies from all nodes. This file allows
-                to activate the collecting (server) mode.

Documentation/ABI/testing/sysfs-class-powercap

@@ -0,0 +1,152 @@
+What:		/sys/class/powercap/
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		The powercap/ class sub directory belongs to the power cap
+		subsystem. Refer to
+		Documentation/power/powercap/powercap.txt for details.
+
+What:		/sys/class/powercap/<control type>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		A <control type> is a unique name under /sys/class/powercap.
+		Here <control type> determines how the power is going to be
+		controlled. A <control type> can contain multiple power zones.
+
+What:		/sys/class/powercap/<control type>/enabled
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		This allows to enable/disable power capping for a "control type".
+		This status affects every power zone using this "control_type.
+
+What:		/sys/class/powercap/<control type>/<power zone>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		A power zone is a single or a collection of devices, which can
+		be independently monitored and controlled. A power zone sysfs
+		entry is qualified with the name of the <control type>.
+		E.g. intel-rapl:0:1:1.
+
+What:		/sys/class/powercap/<control type>/<power zone>/<child power zone>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Power zones may be organized in a hierarchy in which child
+		power zones provide monitoring and control for a subset of
+		devices under the parent. For example, if there is a parent
+		power zone for a whole CPU package, each CPU core in it can
+		be a child power zone.
+
+What:		/sys/class/powercap/.../<power zone>/name
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Specifies the name of this power zone.
+
+What:		/sys/class/powercap/.../<power zone>/energy_uj
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Current energy counter in micro-joules. Write "0" to reset.
+		If the counter can not be reset, then this attribute is
+		read-only.
+
+What:		/sys/class/powercap/.../<power zone>/max_energy_range_uj
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Range of the above energy counter in micro-joules.
+
+
+What:		/sys/class/powercap/.../<power zone>/power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Current power in micro-watts.
+
+What:		/sys/class/powercap/.../<power zone>/max_power_range_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Range of the above power value in micro-watts.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_name
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Each power zone can define one or more constraints. Each
+		constraint can have an optional name. Here "X" can have values
+		from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_power_limit_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Power limit in micro-watts should be applicable for
+		the time window specified by "constraint_X_time_window_us".
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Time window in micro seconds. This is used along with
+		constraint_X_power_limit_uw to define a power constraint.
+		Here "X" can have values from 0 to max integer.
+
+
+What:		/sys/class/powercap/<control type>/.../constraint_X_max_power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum allowed power in micro watts for this constraint.
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/<control type>/.../constraint_X_min_power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum allowed power in micro watts for this constraint.
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_max_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum allowed time window in micro seconds for this
+		constraint. Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_min_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum allowed time window in micro seconds for this
+		constraint. Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/enabled
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description
+		This allows to enable/disable power capping at power zone level.
+		This applies to current power zone and its children.

Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos

@@ -0,0 +1,178 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/control
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/profile
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. profile holds index of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the device is powered on next time.
+		When written, the device activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The device will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_primary
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the default of all keys for
+		a specific profile. Profile index is included in written data.
+		The data has to be 125 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_function
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile index is included
+		in written data. The data has to be 95 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile index is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_thumbster
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile index is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_extra
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock and function keys for a specific profile. Profile index
+		is included in written data. The data has to be 8 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_easyzone
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile index is included
+		in written data. The data has to be 294 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/key_mask
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile index for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile index is included in written data.
+		This attribute is only valid for the glow and pro variant.
+		The data has to be 16 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 480
+		keystrokes for a specific button for a specific profile.
+		Button and profile indexes are included in written data.
+		The data has to be 2002 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/info
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 8 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/reset
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/talk
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_control
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one switch between stored and custom
+		light settings.
+		This attribute is only valid for the pro variant.
+		The data has to be 8 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/stored_lights
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set per-key lighting for different
+		layers.
+		This attribute is only valid for the pro variant.
+		The data has to be 1382 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/custom_lights
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the actual per-key lighting.
+		This attribute is only valid for the pro variant.
+		The data has to be 20 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set a light macro that is looped
+		whenever the device gets in dimness mode.
+		This attribute is only valid for the pro variant.
+		The data has to be 2002 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-wiimote

@@ -57,3 +57,21 @@ Description:	This attribute is only provided if the device was detected as a
 		Calibration data is already applied by the kernel to all input
 		values but may be used by user-space to perform other
 		transformations.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/pro_calib
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	This attribute is only provided if the device was detected as a
+		pro-controller. It provides a single line with 4 calibration
+		values for all 4 analog sticks. Format is: "x1:y1 x2:y2". Data
+		is prefixed with a +/-. Each value is a signed 16bit number.
+		Data is encoded as decimal numbers and specifies the offsets of
+		the analog sticks of the pro-controller.
+		Calibration data is already applied by the kernel to all input
+		values but may be used by user-space to perform other
+		transformations.
+		Calibration data is detected by the kernel during device setup.
+		You can write "scan\n" into this file to re-trigger calibration.
+		You can also write data directly in the form "x1:y1 x2:y2" to
+		set the calibration values manually.

Documentation/ABI/testing/sysfs-driver-sunxi-sid

@@ -0,0 +1,22 @@
+What:		/sys/devices/*/<our-device>/eeprom
+Date:		August 2013
+Contact:	Oliver Schinagl <oliver@schinagl.nl>
+Description:	read-only access to the SID (Security-ID) on current
+		A-series SoC's from Allwinner. Currently supports A10, A10s, A13
+		and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
+		whereas the newer A20 SoC exposes 512 bytes split into sections.
+		Besides the 16 bytes of SID, there's also an SJTAG area,
+		HDMI-HDCP key and some custom keys. Below a quick overview, for
+		details see the user manual:
+		0x000  128 bit root-key (sun[457]i)
+		0x010  128 bit boot-key (sun7i)
+		0x020   64 bit security-jtag-key (sun7i)
+		0x028   16 bit key configuration (sun7i)
+		0x02b   16 bit custom-vendor-key (sun7i)
+		0x02c  320 bit low general key (sun7i)
+		0x040   32 bit read-control access (sun7i)
+		0x064  224 bit low general key (sun7i)
+		0x080 2304 bit HDCP-key (sun7i)
+		0x1a0  768 bit high general key (sun7i)
+Users:		any user space application which wants to read the SID on
+		Allwinner's A-series of CPU's.

Documentation/Changes

@@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
 as root before you can use this.  You'll probably also want to
 get the user-space microcode_ctl utility to use with this.
 
-Powertweak
-----------
-
-If you are running v0.1.17 or earlier, you should upgrade to
-version v0.99.0 or higher. Running old versions may cause problems
-with programs using shared memory.
-
 udev
 ----
 udev is a userspace application for populating /dev dynamically with
@@ -366,10 +359,6 @@ Intel P6 microcode
 ------------------
 o  <http://www.urbanmyth.org/microcode/>
 
-Powertweak
-----------
-o  <http://powertweak.sourceforge.net/>
-
 udev
 ----
 o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>

Documentation/DMA-API-HOWTO.txt

@@ -101,14 +101,23 @@ style to do this even if your device holds the default setting,
 because this shows that you did think about these issues wrt. your
 device.
 
-The query is performed via a call to dma_set_mask():
+The query is performed via a call to dma_set_mask_and_coherent():
 
-	int dma_set_mask(struct device *dev, u64 mask);
+	int dma_set_mask_and_coherent(struct device *dev, u64 mask);
 
-The query for consistent allocations is performed via a call to
-dma_set_coherent_mask():
+which will query the mask for both streaming and coherent APIs together.
+If you have some special requirements, then the following two separate
+queries can be used instead:
 
-	int dma_set_coherent_mask(struct device *dev, u64 mask);
+	The query for streaming mappings is performed via a call to
+	dma_set_mask():
+
+		int dma_set_mask(struct device *dev, u64 mask);
+
+	The query for consistent allocations is performed via a call
+	to dma_set_coherent_mask():
+
+		int dma_set_coherent_mask(struct device *dev, u64 mask);
 
 Here, dev is a pointer to the device struct of your device, and mask
 is a bit mask describing which bits of an address your device
@@ -137,7 +146,7 @@ exactly why.
 
 The standard 32-bit addressing device would do something like this:
 
-	if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
 		goto ignore_this_device;
@@ -171,22 +180,20 @@ the case would look like this:
 
 	int using_dac, consistent_using_dac;
 
-	if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
+	if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
 	   	consistent_using_dac = 1;
-		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
-	} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
+	} else if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
 		using_dac = 0;
 		consistent_using_dac = 0;
-		dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
 	} else {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
 		goto ignore_this_device;
 	}
 
-dma_set_coherent_mask() will always be able to set the same or a
-smaller mask as dma_set_mask(). However for the rare case that a
+The coherent coherent mask will always be able to set the same or a
+smaller mask as the streaming mask. However for the rare case that a
 device driver only uses consistent allocations, one would have to
 check the return value from dma_set_coherent_mask().
 
@@ -199,9 +206,9 @@ address you might do something like:
 		goto ignore_this_device;
 	}
 
-When dma_set_mask() is successful, and returns zero, the kernel saves
-away this mask you have provided.  The kernel will use this
-information later when you make DMA mappings.
+When dma_set_mask() or dma_set_mask_and_coherent() is successful, and
+returns zero, the kernel saves away this mask you have provided.  The
+kernel will use this information later when you make DMA mappings.
 
 There is a case which we are aware of at this time, which is worth
 mentioning in this documentation.  If your device supports multiple

Documentation/DMA-API.txt

@@ -141,6 +141,14 @@ won't change the current mask settings.  It is more intended as an
 internal API for use by the platform than an external API for use by
 driver writers.
 
+int
+dma_set_mask_and_coherent(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+streaming and coherent DMA mask parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
 int
 dma_set_mask(struct device *dev, u64 mask)
 

Documentation/DMA-attributes.txt

@@ -13,7 +13,7 @@ all pending DMA writes to complete, and thus provides a mechanism to
 strictly order DMA from a device across all intervening busses and
 bridges.  This barrier is not specific to a particular type of
 interconnect, it applies to the system as a whole, and so its
-implementation must account for the idiosyncracies of the system all
+implementation must account for the idiosyncrasies of the system all
 the way from the DMA device to memory.
 
 As an example of a situation where DMA_ATTR_WRITE_BARRIER would be
@@ -60,7 +60,7 @@ such mapping is non-trivial task and consumes very limited resources
 Buffers allocated with this attribute can be only passed to user space
 by calling dma_mmap_attrs(). By using this API, you are guaranteeing
 that you won't dereference the pointer returned by dma_alloc_attr(). You
-can threat it as a cookie that must be passed to dma_mmap_attrs() and
+can treat it as a cookie that must be passed to dma_mmap_attrs() and
 dma_free_attrs(). Make sure that both of these also get this attribute
 set on each call.
 
@@ -82,7 +82,7 @@ to 'device' domain, what synchronizes CPU caches for the given region
 (usually it means that the cache has been flushed or invalidated
 depending on the dma direction). However, next calls to
 dma_map_{single,page,sg}() for other devices will perform exactly the
-same sychronization operation on the CPU cache. CPU cache sychronization
+same synchronization operation on the CPU cache. CPU cache synchronization
 might be a time consuming operation, especially if the buffers are
 large, so it is highly recommended to avoid it if possible.
 DMA_ATTR_SKIP_CPU_SYNC allows platform code to skip synchronization of

Documentation/DocBook/80211.tmpl

@@ -152,8 +152,8 @@
 !Finclude/net/cfg80211.h cfg80211_scan_request
 !Finclude/net/cfg80211.h cfg80211_scan_done
 !Finclude/net/cfg80211.h cfg80211_bss
-!Finclude/net/cfg80211.h cfg80211_inform_bss_frame
-!Finclude/net/cfg80211.h cfg80211_inform_bss
+!Finclude/net/cfg80211.h cfg80211_inform_bss_width_frame
+!Finclude/net/cfg80211.h cfg80211_inform_bss_width
 !Finclude/net/cfg80211.h cfg80211_unlink_bss
 !Finclude/net/cfg80211.h cfg80211_find_ie
 !Finclude/net/cfg80211.h ieee80211_bss_get_ie

Documentation/DocBook/device-drivers.tmpl

@@ -58,7 +58,7 @@
      </sect1>
      <sect1><title>Wait queues and Wake events</title>
 !Iinclude/linux/wait.h
-!Ekernel/wait.c
+!Ekernel/sched/wait.c
      </sect1>
      <sect1><title>High-resolution timers</title>
 !Iinclude/linux/ktime.h
@@ -87,7 +87,10 @@ X!Iinclude/linux/kobject.h
 !Ekernel/printk/printk.c
 !Ekernel/panic.c
 !Ekernel/sys.c
-!Ekernel/rcupdate.c
+!Ekernel/rcu/srcu.c
+!Ekernel/rcu/tree.c
+!Ekernel/rcu/tree_plugin.h
+!Ekernel/rcu/update.c
      </sect1>
 
      <sect1><title>Device Resource Management</title>

Documentation/DocBook/filesystems.tmpl

@@ -91,7 +91,6 @@
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c
 !Efs/sysfs/symlink.c
-!Efs/sysfs/bin.c
   </chapter>
 
   <chapter id="debugfs">

Documentation/DocBook/genericirq.tmpl

@@ -87,7 +87,7 @@
   <chapter id="rationale">
     <title>Rationale</title>
 	<para>
-	The original implementation of interrupt handling in Linux is using
+	The original implementation of interrupt handling in Linux uses
 	the __do_IRQ() super-handler, which is able to deal with every
 	type of interrupt logic.
 	</para>
@@ -111,19 +111,19 @@
 	</itemizedlist>
 	</para>
 	<para>
-	This split implementation of highlevel IRQ handlers allows us to
+	This split implementation of high-level IRQ handlers allows us to
 	optimize the flow of the interrupt handling for each specific
-	interrupt type. This reduces complexity in that particular codepath
+	interrupt type. This reduces complexity in that particular code path
 	and allows the optimized handling of a given type.
 	</para>
 	<para>
 	The original general IRQ implementation used hw_interrupt_type
 	structures and their ->ack(), ->end() [etc.] callbacks to
 	differentiate the flow control in the super-handler. This leads to
-	a mix of flow logic and lowlevel hardware logic, and it also leads
-	to unnecessary code duplication: for example in i386, there is a
-	ioapic_level_irq and a ioapic_edge_irq irq-type which share many
-	of the lowlevel details but have different flow handling.
+	a mix of flow logic and low-level hardware logic, and it also leads
+	to unnecessary code duplication: for example in i386, there is an
+	ioapic_level_irq and an ioapic_edge_irq IRQ-type which share many
+	of the low-level details but have different flow handling.
 	</para>
 	<para>
 	A more natural abstraction is the clean separation of the
@@ -132,23 +132,23 @@
 	<para>
 	Analysing a couple of architecture's IRQ subsystem implementations
 	reveals that most of them can use a generic set of 'irq flow'
-	methods and only need to add the chip level specific code.
+	methods and only need to add the chip-level specific code.
 	The separation is also valuable for (sub)architectures
-	which need specific quirks in the irq flow itself but not in the
-	chip-details - and thus provides a more transparent IRQ subsystem
+	which need specific quirks in the IRQ flow itself but not in the
+	chip details - and thus provides a more transparent IRQ subsystem
 	design.
 	</para>
 	<para>
-	Each interrupt descriptor is assigned its own highlevel flow
+	Each interrupt descriptor is assigned its own high-level flow
 	handler, which is normally one of the generic
-	implementations. (This highlevel flow handler implementation also
+	implementations. (This high-level flow handler implementation also
 	makes it simple to provide demultiplexing handlers which can be
 	found in embedded platforms on various architectures.)
 	</para>
 	<para>
 	The separation makes the generic interrupt handling layer more
 	flexible and extensible. For example, an (sub)architecture can
-	use a generic irq-flow implementation for 'level type' interrupts
+	use a generic IRQ-flow implementation for 'level type' interrupts
 	and add a (sub)architecture specific 'edge type' implementation.
 	</para>
 	<para>
@@ -172,9 +172,9 @@
     <para>
 	There are three main levels of abstraction in the interrupt code:
 	<orderedlist>
-	  <listitem><para>Highlevel driver API</para></listitem>
-	  <listitem><para>Highlevel IRQ flow handlers</para></listitem>
-	  <listitem><para>Chiplevel hardware encapsulation</para></listitem>
+	  <listitem><para>High-level driver API</para></listitem>
+	  <listitem><para>High-level IRQ flow handlers</para></listitem>
+	  <listitem><para>Chip-level hardware encapsulation</para></listitem>
 	</orderedlist>
     </para>
     <sect1 id="Interrupt_control_flow">
@@ -189,16 +189,16 @@
 	which are assigned to this interrupt.
 	</para>
 	<para>
-	Whenever an interrupt triggers, the lowlevel arch code calls into
-	the generic interrupt code by calling desc->handle_irq().
-	This highlevel IRQ handling function only uses desc->irq_data.chip
+	Whenever an interrupt triggers, the low-level architecture code calls
+	into the generic interrupt code by calling desc->handle_irq().
+	This high-level IRQ handling function only uses desc->irq_data.chip
 	primitives referenced by the assigned chip descriptor structure.
 	</para>
     </sect1>
     <sect1 id="Highlevel_Driver_API">
-	<title>Highlevel Driver API</title>
+	<title>High-level Driver API</title>
 	<para>
-	  The highlevel Driver API consists of following functions:
+	  The high-level Driver API consists of following functions:
 	  <itemizedlist>
 	  <listitem><para>request_irq()</para></listitem>
 	  <listitem><para>free_irq()</para></listitem>
@@ -216,7 +216,7 @@
 	</para>
     </sect1>
     <sect1 id="Highlevel_IRQ_flow_handlers">
-	<title>Highlevel IRQ flow handlers</title>
+	<title>High-level IRQ flow handlers</title>
 	<para>
 	  The generic layer provides a set of pre-defined irq-flow methods:
 	  <itemizedlist>
@@ -228,7 +228,7 @@
 	  <listitem><para>handle_edge_eoi_irq</para></listitem>
 	  <listitem><para>handle_bad_irq</para></listitem>
 	  </itemizedlist>
-	  The interrupt flow handlers (either predefined or architecture
+	  The interrupt flow handlers (either pre-defined or architecture
 	  specific) are assigned to specific interrupts by the architecture
 	  either during bootup or during device initialization.
 	</para>
@@ -297,7 +297,7 @@ desc->irq_data.chip->irq_unmask();
 		<para>
 		handle_fasteoi_irq provides a generic implementation
 		for interrupts, which only need an EOI at the end of
-		the handler
+		the handler.
 		</para>
 		<para>
 		The following control flow is implemented (simplified excerpt):
@@ -394,7 +394,7 @@ if (desc->irq_data.chip->irq_eoi)
 	The generic functions are intended for 'clean' architectures and chips,
 	which have no platform-specific IRQ handling quirks. If an architecture
 	needs to implement quirks on the 'flow' level then it can do so by
-	overriding the highlevel irq-flow handler.
+	overriding the high-level irq-flow handler.
 	</para>
 	</sect2>
 	<sect2 id="Delayed_interrupt_disable">
@@ -419,9 +419,9 @@ if (desc->irq_data.chip->irq_eoi)
 	</sect2>
     </sect1>
     <sect1 id="Chiplevel_hardware_encapsulation">
-	<title>Chiplevel hardware encapsulation</title>
+	<title>Chip-level hardware encapsulation</title>
 	<para>
-	The chip level hardware descriptor structure irq_chip
+	The chip-level hardware descriptor structure irq_chip
 	contains all the direct chip relevant functions, which
 	can be utilized by the irq flow implementations.
 	  <itemizedlist>
@@ -429,14 +429,14 @@ if (desc->irq_data.chip->irq_eoi)
 	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
 	  <listitem><para>irq_mask()</para></listitem>
 	  <listitem><para>irq_unmask()</para></listitem>
-	  <listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
+	  <listitem><para>irq_eoi() - Optional, required for EOI flow handlers</para></listitem>
 	  <listitem><para>irq_retrigger() - Optional</para></listitem>
 	  <listitem><para>irq_set_type() - Optional</para></listitem>
 	  <listitem><para>irq_set_wake() - Optional</para></listitem>
 	  </itemizedlist>
 	These primitives are strictly intended to mean what they say: ack means
 	ACK, masking means masking of an IRQ line, etc. It is up to the flow
-	handler(s) to use these basic units of lowlevel functionality.
+	handler(s) to use these basic units of low-level functionality.
 	</para>
     </sect1>
   </chapter>
@@ -445,7 +445,7 @@ if (desc->irq_data.chip->irq_eoi)
      <title>__do_IRQ entry point</title>
      <para>
 	The original implementation __do_IRQ() was an alternative entry
-	point for all types of interrupts. It not longer exists.
+	point for all types of interrupts. It no longer exists.
      </para>
      <para>
 	This handler turned out to be not suitable for all
@@ -468,11 +468,11 @@ if (desc->irq_data.chip->irq_eoi)
   <chapter id="genericchip">
      <title>Generic interrupt chip</title>
      <para>
-       To avoid copies of identical implementations of irq chips the
+       To avoid copies of identical implementations of IRQ chips the
        core provides a configurable generic interrupt chip
        implementation. Developers should check carefuly whether the
        generic chip fits their needs before implementing the same
-       functionality slightly different themself.
+       functionality slightly differently themselves.
      </para>
 !Ekernel/irq/generic-chip.c
   </chapter>

Documentation/DocBook/kernel-locking.tmpl

@@ -1958,7 +1958,7 @@ machines due to caching.
   <chapter id="apiref-mutex">
    <title>Mutex API reference</title>
 !Iinclude/linux/mutex.h
-!Ekernel/mutex.c
+!Ekernel/locking/mutex.c
   </chapter>
 
   <chapter id="apiref-futex">

Documentation/DocBook/media/v4l/vidioc-expbuf.xml

@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
 format. For the single-planar API, applications must set <structfield> plane
 </structfield> to zero.  Additional flags may be posted in the <structfield>
 flags </structfield> field.  Refer to a manual for open() for details.
-Currently only O_CLOEXEC is supported.  All other fields must be set to zero.
+Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported.  All
+other fields must be set to zero.
 In the case of multi-planar API, every plane is exported separately using
 multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
 
@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>flags</structfield></entry>
 	    <entry>Flags for the newly created file, currently only <constant>
-O_CLOEXEC </constant> is supported, refer to the manual of open() for more
-details.</entry>
+O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
+</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
+of open() for more details.</entry>
 	  </row>
 	  <row>
 	    <entry>__s32</entry>

Documentation/DocBook/mtdnand.tmpl

@@ -1222,8 +1222,6 @@ in this page</entry>
 #define NAND_BBT_VERSION	0x00000100
 /* Create a bbt if none axists */
 #define NAND_BBT_CREATE		0x00000200
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000400
 /* Write bbt if neccecary */
 #define NAND_BBT_WRITE		0x00001000
 /* Read and write back block contents when writing bbt */

Documentation/PCI/pci.txt

@@ -525,8 +525,9 @@ corresponding register block for you.
 6. Other interesting functions
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-pci_find_slot()			Find pci_dev corresponding to given bus and
-				slot numbers.
+pci_get_domain_bus_and_slot()	Find pci_dev corresponding to given domain,
+				bus and slot and number. If the device is
+				found, its reference count is increased.
 pci_set_power_state()		Set PCI Power Management state (0=D0 ... 3=D3)
 pci_find_capability()		Find specified capability in device's capability
 				list.
@@ -582,7 +583,8 @@ having sane locking.
 
 pci_find_device()	Superseded by pci_get_device()
 pci_find_subsys()	Superseded by pci_get_subsys()
-pci_find_slot()		Superseded by pci_get_slot()
+pci_find_slot()		Superseded by pci_get_domain_bus_and_slot()
+pci_get_slot()		Superseded by pci_get_domain_bus_and_slot()
 
 
 The alternative is the traditional PCI device driver that walks PCI

Documentation/RCU/checklist.txt

@@ -202,8 +202,8 @@ over a rather long period of time, but improvements are always welcome!
 	updater uses call_rcu_sched() or synchronize_sched(), then
 	the corresponding readers must disable preemption, possibly
 	by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
-	If the updater uses synchronize_srcu() or call_srcu(),
-	the the corresponding readers must use srcu_read_lock() and
+	If the updater uses synchronize_srcu() or call_srcu(), then
+	the corresponding readers must use srcu_read_lock() and
 	srcu_read_unlock(), and with the same srcu_struct.  The rules for
 	the expedited primitives are the same as for their non-expedited
 	counterparts.  Mixing things up will result in confusion and

Documentation/RCU/stallwarn.txt

@@ -12,12 +12,12 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
 	This kernel configuration parameter defines the period of time
 	that RCU will wait from the beginning of a grace period until it
 	issues an RCU CPU stall warning.  This time period is normally
-	sixty seconds.
+	21 seconds.
 
 	This configuration parameter may be changed at runtime via the
 	/sys/module/rcutree/parameters/rcu_cpu_stall_timeout, however
 	this parameter is checked only at the beginning of a cycle.
-	So if you are 30 seconds into a 70-second stall, setting this
+	So if you are 10 seconds into a 40-second stall, setting this
 	sysfs parameter to (say) five will shorten the timeout for the
 	-next- stall, or the following warning for the current stall
 	(assuming the stall lasts long enough).  It will not affect the
@@ -32,7 +32,7 @@ CONFIG_RCU_CPU_STALL_VERBOSE
 	also dump the stacks of any tasks that are blocking the current
 	RCU-preempt grace period.
 
-RCU_CPU_STALL_INFO
+CONFIG_RCU_CPU_STALL_INFO
 
 	This kernel configuration parameter causes the stall warning to
 	print out additional per-CPU diagnostic information, including
@@ -43,7 +43,8 @@ RCU_STALL_DELAY_DELTA
 	Although the lockdep facility is extremely useful, it does add
 	some overhead.  Therefore, under CONFIG_PROVE_RCU, the
 	RCU_STALL_DELAY_DELTA macro allows five extra seconds before
-	giving an RCU CPU stall warning message.
+	giving an RCU CPU stall warning message.  (This is a cpp
+	macro, not a kernel configuration parameter.)
 
 RCU_STALL_RAT_DELAY
 
@@ -52,7 +53,8 @@ RCU_STALL_RAT_DELAY
 	However, if the offending CPU does not detect its own stall in
 	the number of jiffies specified by RCU_STALL_RAT_DELAY, then
 	some other CPU will complain.  This delay is normally set to
-	two jiffies.
+	two jiffies.  (This is a cpp macro, not a kernel configuration
+	parameter.)
 
 When a CPU detects that it is stalling, it will print a message similar
 to the following:
@@ -86,7 +88,12 @@ printing, there will be a spurious stall-warning message:
 
 INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies)
 
-This is rare, but does happen from time to time in real life.
+This is rare, but does happen from time to time in real life.  It is also
+possible for a zero-jiffy stall to be flagged in this case, depending
+on how the stall warning and the grace-period initialization happen to
+interact.  Please note that it is not possible to entirely eliminate this
+sort of false positive without resorting to things like stop_machine(),
+which is overkill for this sort of problem.
 
 If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
 more information is printed with the stall-warning message, for example:
@@ -216,4 +223,5 @@ that portion of the stack which remains the same from trace to trace.
 If you can reliably trigger the stall, ftrace can be quite helpful.
 
 RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE
-and with RCU's event tracing.
+and with RCU's event tracing.  For information on RCU's event tracing,
+see include/trace/events/rcu.h.

Documentation/acpi/enumeration.txt

@@ -295,10 +295,6 @@ These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
 specifies the path to the controller. In order to use these GPIOs in Linux
 we need to translate them to the Linux GPIO numbers.
 
-The driver can do this by including <linux/acpi_gpio.h> and then calling
-acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
-negative errno if there was no translation found.
-
 In a simple case of just getting the Linux GPIO number from device
 resources one can use acpi_get_gpio_by_index() helper function. It takes
 pointer to the device and index of the GpioIo/GpioInt descriptor in the
@@ -322,3 +318,25 @@ suitable to the gpiolib before passing them.
 
 In case of GpioInt resource an additional call to gpio_to_irq() must be
 done before calling request_irq().
+
+Note that the above API is ACPI specific and not recommended for drivers
+that need to support non-ACPI systems. The recommended way is to use
+the descriptor based GPIO interfaces. The above example looks like this
+when converted to the GPIO desc:
+
+	#include <linux/gpio/consumer.h>
+	...
+
+	struct gpio_desc *irq_desc, *power_desc;
+
+	irq_desc = gpiod_get_index(dev, NULL, 1);
+	if (IS_ERR(irq_desc))
+		/* handle error */
+
+	power_desc = gpiod_get_index(dev, NULL, 0);
+	if (IS_ERR(power_desc))
+		/* handle error */
+
+	/* Now we can use the GPIO descriptors */
+
+See also Documentation/gpio.txt.

Documentation/arm/Marvell/README

@@ -88,6 +88,7 @@ EBU Armada family
         MV78230
         MV78260
         MV78460
+    NOTE: not to be confused with the non-SMP 78xx0 SoCs
 
   Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
   No public datasheet available.

Documentation/arm/sunxi/README

@@ -10,6 +10,10 @@ SunXi family
   Linux kernel mach directory: arch/arm/mach-sunxi
 
   Flavors:
+    * ARM926 based SoCs
+      - Allwinner F20 (sun3i)
+        + Not Supported
+
     * ARM Cortex-A8 based SoCs
       - Allwinner A10 (sun4i)
         + Datasheet
@@ -25,4 +29,24 @@ SunXi family
         + Datasheet
 	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
         + User Manual
-	  http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-08-08%29.pdf
+          http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
+
+    * Dual ARM Cortex-A7 based SoCs
+      - Allwinner A20 (sun7i)
+        + User Manual
+          http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+
+      - Allwinner A23
+        + Not Supported
+
+    * Quad ARM Cortex-A7 based SoCs
+      - Allwinner A31 (sun6i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf
+
+      - Allwinner A31s (sun6i)
+        + Not Supported
+
+    * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
+      - Allwinner A80
+        + Not Supported

Documentation/arm64/booting.txt

@@ -115,9 +115,10 @@ Before jumping into the kernel, the following conditions must be met:
   External caches (if present) must be configured and disabled.
 
 - Architected timers
-  CNTFRQ must be programmed with the timer frequency.
-  If entering the kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0)
-  set where available.
+  CNTFRQ must be programmed with the timer frequency and CNTVOFF must
+  be programmed with a consistent value on all CPUs.  If entering the
+  kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where
+  available.
 
 - Coherency
   All CPUs to be booted by the kernel must be part of the same coherency
@@ -130,30 +131,46 @@ Before jumping into the kernel, the following conditions must be met:
   the kernel image will be entered must be initialised by software at a
   higher exception level to prevent execution in an UNKNOWN state.
 
+The requirements described above for CPU mode, caches, MMUs, architected
+timers, coherency and system registers apply to all CPUs.  All CPUs must
+enter the kernel in the same exception level.
+
 The boot loader is expected to enter the kernel on each CPU in the
 following manner:
 
 - The primary CPU must jump directly to the first instruction of the
   kernel image.  The device tree blob passed by this CPU must contain
-  for each CPU node:
-
-    1. An 'enable-method' property. Currently, the only supported value
-       for this field is the string "spin-table".
-
-    2. A 'cpu-release-addr' property identifying a 64-bit,
-       zero-initialised memory location.
+  an 'enable-method' property for each cpu node.  The supported
+  enable-methods are described below.
 
   It is expected that the bootloader will generate these device tree
   properties and insert them into the blob prior to kernel entry.
 
-- Any secondary CPUs must spin outside of the kernel in a reserved area
-  of memory (communicated to the kernel by a /memreserve/ region in the
+- CPUs with a "spin-table" enable-method must have a 'cpu-release-addr'
+  property in their cpu node.  This property identifies a
+  naturally-aligned 64-bit zero-initalised memory location.
+
+  These CPUs should spin outside of the kernel in a reserved area of
+  memory (communicated to the kernel by a /memreserve/ region in the
   device tree) polling their cpu-release-addr location, which must be
   contained in the reserved region.  A wfe instruction may be inserted
   to reduce the overhead of the busy-loop and a sev will be issued by
   the primary CPU.  When a read of the location pointed to by the
-  cpu-release-addr returns a non-zero value, the CPU must jump directly
-  to this value.
+  cpu-release-addr returns a non-zero value, the CPU must jump to this
+  value.  The value will be written as a single 64-bit little-endian
+  value, so CPUs must convert the read value to their native endianness
+  before jumping to it.
+
+- CPUs with a "psci" enable method should remain outside of
+  the kernel (i.e. outside of the regions of memory described to the
+  kernel in the memory node, or in a reserved area of memory described
+  to the kernel by a /memreserve/ region in the device tree).  The
+  kernel will issue CPU_ON calls as described in ARM document number ARM
+  DEN 0022A ("Power State Coordination Interface System Software on ARM
+  processors") to bring CPUs into the kernel.
+
+  The device tree should contain a 'psci' node, as described in
+  Documentation/devicetree/bindings/arm/psci.txt.
 
 - Secondary CPU general-purpose register settings
   x0 = 0 (reserved for future use)

Documentation/arm64/memory.txt

@@ -21,7 +21,7 @@ The swapper_pgd_dir address is written to TTBR1 and never written to
 TTBR0.
 
 
-AArch64 Linux memory layout:
+AArch64 Linux memory layout with 4KB pages:
 
 Start			End			Size		Use
 -----------------------------------------------------------------------
@@ -39,13 +39,38 @@ ffffffbffbc00000	ffffffbffbdfffff	   2MB		earlyprintk device
 
 ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
 
-ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[guard]
+ffffffbffbe10000	ffffffbcffffffff	  ~2MB		[guard]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		modules
 
 ffffffc000000000	ffffffffffffffff	 256GB		kernel logical memory map
 
 
+AArch64 Linux memory layout with 64KB pages:
+
+Start			End			Size		Use
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		user
+
+fffffc0000000000	fffffdfbfffeffff	  ~2TB		vmalloc
+
+fffffdfbffff0000	fffffdfbffffffff	  64KB		[guard page]
+
+fffffdfc00000000	fffffdfdffffffff	   8GB		vmemmap
+
+fffffdfe00000000	fffffdfffbbfffff	  ~8GB		[guard, future vmmemap]
+
+fffffdfffbc00000	fffffdfffbdfffff	   2MB		earlyprintk device
+
+fffffdfffbe00000	fffffdfffbe0ffff	  64KB		PCI I/O space
+
+fffffdfffbe10000	fffffdfffbffffff	  ~2MB		[guard]
+
+fffffdfffc000000	fffffdffffffffff	  64MB		modules
+
+fffffe0000000000	ffffffffffffffff	   2TB		kernel logical memory map
+
+
 Translation table lookup with 4KB pages:
 
 +--------+--------+--------+--------+--------+--------+--------+--------+

Documentation/assoc_array.txt

@@ -0,0 +1,574 @@
+		   ========================================
+		   GENERIC ASSOCIATIVE ARRAY IMPLEMENTATION
+		   ========================================
+
+Contents:
+
+ - Overview.
+
+ - The public API.
+   - Edit script.
+   - Operations table.
+   - Manipulation functions.
+   - Access functions.
+   - Index key form.
+
+ - Internal workings.
+   - Basic internal tree layout.
+   - Shortcuts.
+   - Splitting and collapsing nodes.
+   - Non-recursive iteration.
+   - Simultaneous alteration and iteration.
+
+
+========
+OVERVIEW
+========
+
+This associative array implementation is an object container with the following
+properties:
+
+ (1) Objects are opaque pointers.  The implementation does not care where they
+     point (if anywhere) or what they point to (if anything).
+
+     [!] NOTE: Pointers to objects _must_ be zero in the least significant bit.
+
+ (2) Objects do not need to contain linkage blocks for use by the array.  This
+     permits an object to be located in multiple arrays simultaneously.
+     Rather, the array is made up of metadata blocks that point to objects.
+
+ (3) Objects require index keys to locate them within the array.
+
+ (4) Index keys must be unique.  Inserting an object with the same key as one
+     already in the array will replace the old object.
+
+ (5) Index keys can be of any length and can be of different lengths.
+
+ (6) Index keys should encode the length early on, before any variation due to
+     length is seen.
+
+ (7) Index keys can include a hash to scatter objects throughout the array.
+
+ (8) The array can iterated over.  The objects will not necessarily come out in
+     key order.
+
+ (9) The array can be iterated over whilst it is being modified, provided the
+     RCU readlock is being held by the iterator.  Note, however, under these
+     circumstances, some objects may be seen more than once.  If this is a
+     problem, the iterator should lock against modification.  Objects will not
+     be missed, however, unless deleted.
+
+(10) Objects in the array can be looked up by means of their index key.
+
+(11) Objects can be looked up whilst the array is being modified, provided the
+     RCU readlock is being held by the thread doing the look up.
+
+The implementation uses a tree of 16-pointer nodes internally that are indexed
+on each level by nibbles from the index key in the same manner as in a radix
+tree.  To improve memory efficiency, shortcuts can be emplaced to skip over
+what would otherwise be a series of single-occupancy nodes.  Further, nodes
+pack leaf object pointers into spare space in the node rather than making an
+extra branch until as such time an object needs to be added to a full node.
+
+
+==============
+THE PUBLIC API
+==============
+
+The public API can be found in <linux/assoc_array.h>.  The associative array is
+rooted on the following structure:
+
+	struct assoc_array {
+		...
+	};
+
+The code is selected by enabling CONFIG_ASSOCIATIVE_ARRAY.
+
+
+EDIT SCRIPT
+-----------
+
+The insertion and deletion functions produce an 'edit script' that can later be
+applied to effect the changes without risking ENOMEM.  This retains the
+preallocated metadata blocks that will be installed in the internal tree and
+keeps track of the metadata blocks that will be removed from the tree when the
+script is applied.
+
+This is also used to keep track of dead blocks and dead objects after the
+script has been applied so that they can be freed later.  The freeing is done
+after an RCU grace period has passed - thus allowing access functions to
+proceed under the RCU read lock.
+
+The script appears as outside of the API as a pointer of the type:
+
+	struct assoc_array_edit;
+
+There are two functions for dealing with the script:
+
+ (1) Apply an edit script.
+
+	void assoc_array_apply_edit(struct assoc_array_edit *edit);
+
+     This will perform the edit functions, interpolating various write barriers
+     to permit accesses under the RCU read lock to continue.  The edit script
+     will then be passed to call_rcu() to free it and any dead stuff it points
+     to.
+
+ (2) Cancel an edit script.
+
+	void assoc_array_cancel_edit(struct assoc_array_edit *edit);
+
+     This frees the edit script and all preallocated memory immediately.  If
+     this was for insertion, the new object is _not_ released by this function,
+     but must rather be released by the caller.
+
+These functions are guaranteed not to fail.
+
+
+OPERATIONS TABLE
+----------------
+
+Various functions take a table of operations:
+
+	struct assoc_array_ops {
+		...
+	};
+
+This points to a number of methods, all of which need to be provided:
+
+ (1) Get a chunk of index key from caller data:
+
+	unsigned long (*get_key_chunk)(const void *index_key, int level);
+
+     This should return a chunk of caller-supplied index key starting at the
+     *bit* position given by the level argument.  The level argument will be a
+     multiple of ASSOC_ARRAY_KEY_CHUNK_SIZE and the function should return
+     ASSOC_ARRAY_KEY_CHUNK_SIZE bits.  No error is possible.
+
+
+ (2) Get a chunk of an object's index key.
+
+	unsigned long (*get_object_key_chunk)(const void *object, int level);
+
+     As the previous function, but gets its data from an object in the array
+     rather than from a caller-supplied index key.
+
+
+ (3) See if this is the object we're looking for.
+
+	bool (*compare_object)(const void *object, const void *index_key);
+
+     Compare the object against an index key and return true if it matches and
+     false if it doesn't.
+
+
+ (4) Diff the index keys of two objects.
+
+	int (*diff_objects)(const void *object, const void *index_key);
+
+     Return the bit position at which the index key of the specified object
+     differs from the given index key or -1 if they are the same.
+
+
+ (5) Free an object.
+
+	void (*free_object)(void *object);
+
+     Free the specified object.  Note that this may be called an RCU grace
+     period after assoc_array_apply_edit() was called, so synchronize_rcu() may
+     be necessary on module unloading.
+
+
+MANIPULATION FUNCTIONS
+----------------------
+
+There are a number of functions for manipulating an associative array:
+
+ (1) Initialise an associative array.
+
+	void assoc_array_init(struct assoc_array *array);
+
+     This initialises the base structure for an associative array.  It can't
+     fail.
+
+
+ (2) Insert/replace an object in an associative array.
+
+	struct assoc_array_edit *
+	assoc_array_insert(struct assoc_array *array,
+			   const struct assoc_array_ops *ops,
+			   const void *index_key,
+			   void *object);
+
+     This inserts the given object into the array.  Note that the least
+     significant bit of the pointer must be zero as it's used to type-mark
+     pointers internally.
+
+     If an object already exists for that key then it will be replaced with the
+     new object and the old one will be freed automatically.
+
+     The index_key argument should hold index key information and is
+     passed to the methods in the ops table when they are called.
+
+     This function makes no alteration to the array itself, but rather returns
+     an edit script that must be applied.  -ENOMEM is returned in the case of
+     an out-of-memory error.
+
+     The caller should lock exclusively against other modifiers of the array.
+
+
+ (3) Delete an object from an associative array.
+
+	struct assoc_array_edit *
+	assoc_array_delete(struct assoc_array *array,
+			   const struct assoc_array_ops *ops,
+			   const void *index_key);
+
+     This deletes an object that matches the specified data from the array.
+
+     The index_key argument should hold index key information and is
+     passed to the methods in the ops table when they are called.
+
+     This function makes no alteration to the array itself, but rather returns
+     an edit script that must be applied.  -ENOMEM is returned in the case of
+     an out-of-memory error.  NULL will be returned if the specified object is
+     not found within the array.
+
+     The caller should lock exclusively against other modifiers of the array.
+
+
+ (4) Delete all objects from an associative array.
+
+	struct assoc_array_edit *
+	assoc_array_clear(struct assoc_array *array,
+			  const struct assoc_array_ops *ops);
+
+     This deletes all the objects from an associative array and leaves it
+     completely empty.
+
+     This function makes no alteration to the array itself, but rather returns
+     an edit script that must be applied.  -ENOMEM is returned in the case of
+     an out-of-memory error.
+
+     The caller should lock exclusively against other modifiers of the array.
+
+
+ (5) Destroy an associative array, deleting all objects.
+
+	void assoc_array_destroy(struct assoc_array *array,
+				 const struct assoc_array_ops *ops);
+
+     This destroys the contents of the associative array and leaves it
+     completely empty.  It is not permitted for another thread to be traversing
+     the array under the RCU read lock at the same time as this function is
+     destroying it as no RCU deferral is performed on memory release -
+     something that would require memory to be allocated.
+
+     The caller should lock exclusively against other modifiers and accessors
+     of the array.
+
+
+ (6) Garbage collect an associative array.
+
+	int assoc_array_gc(struct assoc_array *array,
+			   const struct assoc_array_ops *ops,
+			   bool (*iterator)(void *object, void *iterator_data),
+			   void *iterator_data);
+
+     This iterates over the objects in an associative array and passes each one
+     to iterator().  If iterator() returns true, the object is kept.  If it
+     returns false, the object will be freed.  If the iterator() function
+     returns true, it must perform any appropriate refcount incrementing on the
+     object before returning.
+
+     The internal tree will be packed down if possible as part of the iteration
+     to reduce the number of nodes in it.
+
+     The iterator_data is passed directly to iterator() and is otherwise
+     ignored by the function.
+
+     The function will return 0 if successful and -ENOMEM if there wasn't
+     enough memory.
+
+     It is possible for other threads to iterate over or search the array under
+     the RCU read lock whilst this function is in progress.  The caller should
+     lock exclusively against other modifiers of the array.
+
+
+ACCESS FUNCTIONS
+----------------
+
+There are two functions for accessing an associative array:
+
+ (1) Iterate over all the objects in an associative array.
+
+	int assoc_array_iterate(const struct assoc_array *array,
+				int (*iterator)(const void *object,
+						void *iterator_data),
+				void *iterator_data);
+
+     This passes each object in the array to the iterator callback function.
+     iterator_data is private data for that function.
+
+     This may be used on an array at the same time as the array is being
+     modified, provided the RCU read lock is held.  Under such circumstances,
+     it is possible for the iteration function to see some objects twice.  If
+     this is a problem, then modification should be locked against.  The
+     iteration algorithm should not, however, miss any objects.
+
+     The function will return 0 if no objects were in the array or else it will
+     return the result of the last iterator function called.  Iteration stops
+     immediately if any call to the iteration function results in a non-zero
+     return.
+
+
+ (2) Find an object in an associative array.
+
+	void *assoc_array_find(const struct assoc_array *array,
+			       const struct assoc_array_ops *ops,
+			       const void *index_key);
+
+     This walks through the array's internal tree directly to the object
+     specified by the index key..
+
+     This may be used on an array at the same time as the array is being
+     modified, provided the RCU read lock is held.
+
+     The function will return the object if found (and set *_type to the object
+     type) or will return NULL if the object was not found.
+
+
+INDEX KEY FORM
+--------------
+
+The index key can be of any form, but since the algorithms aren't told how long
+the key is, it is strongly recommended that the index key includes its length
+very early on before any variation due to the length would have an effect on
+comparisons.
+
+This will cause leaves with different length keys to scatter away from each
+other - and those with the same length keys to cluster together.
+
+It is also recommended that the index key begin with a hash of the rest of the
+key to maximise scattering throughout keyspace.
+
+The better the scattering, the wider and lower the internal tree will be.
+
+Poor scattering isn't too much of a problem as there are shortcuts and nodes
+can contain mixtures of leaves and metadata pointers.
+
+The index key is read in chunks of machine word.  Each chunk is subdivided into
+one nibble (4 bits) per level, so on a 32-bit CPU this is good for 8 levels and
+on a 64-bit CPU, 16 levels.  Unless the scattering is really poor, it is
+unlikely that more than one word of any particular index key will have to be
+used.
+
+
+=================
+INTERNAL WORKINGS
+=================
+
+The associative array data structure has an internal tree.  This tree is
+constructed of two types of metadata blocks: nodes and shortcuts.
+
+A node is an array of slots.  Each slot can contain one of four things:
+
+ (*) A NULL pointer, indicating that the slot is empty.
+
+ (*) A pointer to an object (a leaf).
+
+ (*) A pointer to a node at the next level.
+
+ (*) A pointer to a shortcut.
+
+
+BASIC INTERNAL TREE LAYOUT
+--------------------------
+
+Ignoring shortcuts for the moment, the nodes form a multilevel tree.  The index
+key space is strictly subdivided by the nodes in the tree and nodes occur on
+fixed levels.  For example:
+
+ Level:	0		1		2		3
+	===============	===============	===============	===============
+							NODE D
+			NODE B		NODE C	+------>+---+
+		+------>+---+	+------>+---+	|	| 0 |
+	NODE A	|	| 0 |	|	| 0 |	|	+---+
+	+---+	|	+---+	|	+---+	|	:   :
+	| 0 |	|	:   :	|	:   :	|	+---+
+	+---+	|	+---+	|	+---+	|	| f |
+	| 1 |---+	| 3 |---+	| 7 |---+	+---+
+	+---+		+---+		+---+
+	:   :		:   :		| 8 |---+
+	+---+		+---+		+---+	|	NODE E
+	| e |---+	| f |		:   :   +------>+---+
+	+---+	|	+---+		+---+		| 0 |
+	| f |	|			| f |		+---+
+	+---+	|			+---+		:   :
+		|	NODE F				+---+
+		+------>+---+				| f |
+			| 0 |		NODE G		+---+
+			+---+	+------>+---+
+			:   :	|	| 0 |
+			+---+	|	+---+
+			| 6 |---+	:   :
+			+---+		+---+
+			:   :		| f |
+			+---+		+---+
+			| f |
+			+---+
+
+In the above example, there are 7 nodes (A-G), each with 16 slots (0-f).
+Assuming no other meta data nodes in the tree, the key space is divided thusly:
+
+	KEY PREFIX	NODE
+	==========	====
+	137*		D
+	138*		E
+	13[0-69-f]*	C
+	1[0-24-f]*	B
+	e6*		G
+	e[0-57-f]*	F
+	[02-df]*	A
+
+So, for instance, keys with the following example index keys will be found in
+the appropriate nodes:
+
+	INDEX KEY	PREFIX	NODE
+	===============	=======	====
+	13694892892489	13	C
+	13795289025897	137	D
+	13889dde88793	138	E
+	138bbb89003093	138	E
+	1394879524789	12	C
+	1458952489	1	B
+	9431809de993ba	-	A
+	b4542910809cd	-	A
+	e5284310def98	e	F
+	e68428974237	e6	G
+	e7fffcbd443	e	F
+	f3842239082	-	A
+
+To save memory, if a node can hold all the leaves in its portion of keyspace,
+then the node will have all those leaves in it and will not have any metadata
+pointers - even if some of those leaves would like to be in the same slot.
+
+A node can contain a heterogeneous mix of leaves and metadata pointers.
+Metadata pointers must be in the slots that match their subdivisions of key
+space.  The leaves can be in any slot not occupied by a metadata pointer.  It
+is guaranteed that none of the leaves in a node will match a slot occupied by a
+metadata pointer.  If the metadata pointer is there, any leaf whose key matches
+the metadata key prefix must be in the subtree that the metadata pointer points
+to.
+
+In the above example list of index keys, node A will contain:
+
+	SLOT	CONTENT		INDEX KEY (PREFIX)
+	====	===============	==================
+	1	PTR TO NODE B	1*
+	any	LEAF		9431809de993ba
+	any	LEAF		b4542910809cd
+	e	PTR TO NODE F	e*
+	any	LEAF		f3842239082
+
+and node B:
+
+	3	PTR TO NODE C	13*
+	any	LEAF		1458952489
+
+
+SHORTCUTS
+---------
+
+Shortcuts are metadata records that jump over a piece of keyspace.  A shortcut
+is a replacement for a series of single-occupancy nodes ascending through the
+levels.  Shortcuts exist to save memory and to speed up traversal.
+
+It is possible for the root of the tree to be a shortcut - say, for example,
+the tree contains at least 17 nodes all with key prefix '1111'.  The insertion
+algorithm will insert a shortcut to skip over the '1111' keyspace in a single
+bound and get to the fourth level where these actually become different.
+
+
+SPLITTING AND COLLAPSING NODES
+------------------------------
+
+Each node has a maximum capacity of 16 leaves and metadata pointers.  If the
+insertion algorithm finds that it is trying to insert a 17th object into a
+node, that node will be split such that at least two leaves that have a common
+key segment at that level end up in a separate node rooted on that slot for
+that common key segment.
+
+If the leaves in a full node and the leaf that is being inserted are
+sufficiently similar, then a shortcut will be inserted into the tree.
+
+When the number of objects in the subtree rooted at a node falls to 16 or
+fewer, then the subtree will be collapsed down to a single node - and this will
+ripple towards the root if possible.
+
+
+NON-RECURSIVE ITERATION
+-----------------------
+
+Each node and shortcut contains a back pointer to its parent and the number of
+slot in that parent that points to it.  None-recursive iteration uses these to
+proceed rootwards through the tree, going to the parent node, slot N + 1 to
+make sure progress is made without the need for a stack.
+
+The backpointers, however, make simultaneous alteration and iteration tricky.
+
+
+SIMULTANEOUS ALTERATION AND ITERATION
+-------------------------------------
+
+There are a number of cases to consider:
+
+ (1) Simple insert/replace.  This involves simply replacing a NULL or old
+     matching leaf pointer with the pointer to the new leaf after a barrier.
+     The metadata blocks don't change otherwise.  An old leaf won't be freed
+     until after the RCU grace period.
+
+ (2) Simple delete.  This involves just clearing an old matching leaf.  The
+     metadata blocks don't change otherwise.  The old leaf won't be freed until
+     after the RCU grace period.
+
+ (3) Insertion replacing part of a subtree that we haven't yet entered.  This
+     may involve replacement of part of that subtree - but that won't affect
+     the iteration as we won't have reached the pointer to it yet and the
+     ancestry blocks are not replaced (the layout of those does not change).
+
+ (4) Insertion replacing nodes that we're actively processing.  This isn't a
+     problem as we've passed the anchoring pointer and won't switch onto the
+     new layout until we follow the back pointers - at which point we've
+     already examined the leaves in the replaced node (we iterate over all the
+     leaves in a node before following any of its metadata pointers).
+
+     We might, however, re-see some leaves that have been split out into a new
+     branch that's in a slot further along than we were at.
+
+ (5) Insertion replacing nodes that we're processing a dependent branch of.
+     This won't affect us until we follow the back pointers.  Similar to (4).
+
+ (6) Deletion collapsing a branch under us.  This doesn't affect us because the
+     back pointers will get us back to the parent of the new node before we
+     could see the new node.  The entire collapsed subtree is thrown away
+     unchanged - and will still be rooted on the same slot, so we shouldn't
+     process it a second time as we'll go back to slot + 1.
+
+Note:
+
+ (*) Under some circumstances, we need to simultaneously change the parent
+     pointer and the parent slot pointer on a node (say, for example, we
+     inserted another node before it and moved it up a level).  We cannot do
+     this without locking against a read - so we have to replace that node too.
+
+     However, when we're changing a shortcut into a node this isn't a problem
+     as shortcuts only have one slot and so the parent slot number isn't used
+     when traversing backwards over one.  This means that it's okay to change
+     the slot number first - provided suitable barriers are used to make sure
+     the parent slot number is read after the back pointer.
+
+Obsolete blocks and leaves are freed up after an RCU grace period has passed,
+so as long as anyone doing walking or iteration holds the RCU read lock, the
+old superstructure should not go away on them.

Documentation/backlight/lp855x-driver.txt

@@ -4,7 +4,8 @@ Kernel driver lp855x
 Backlight driver for LP855x ICs
 
 Supported chips:
-	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
+	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+	LP8557
 
 Author: Milo(Woogyom) Kim <milo.kim@ti.com>
 
@@ -24,7 +25,7 @@ Value : pwm based or register based
 
 2) chip_id
 The lp855x chip id.
-Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
+Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
 
 Platform data for lp855x
 ------------------------

Documentation/block/null_blk.txt

@@ -0,0 +1,72 @@
+Null block device driver
+================================================================================
+
+I. Overview
+
+The null block device (/dev/nullb*) is used for benchmarking the various
+block-layer implementations. It emulates a block device of X gigabytes in size.
+The following instances are possible:
+
+  Single-queue block-layer
+    - Request-based.
+    - Single submission queue per device.
+    - Implements IO scheduling algorithms (CFQ, Deadline, noop).
+  Multi-queue block-layer
+    - Request-based.
+    - Configurable submission queues per device.
+  No block-layer (Known as bio-based)
+    - Bio-based. IO requests are submitted directly to the device driver.
+    - Directly accepts bio data structure and returns them.
+
+All of them have a completion queue for each core in the system.
+
+II. Module parameters applicable for all instances:
+
+queue_mode=[0-2]: Default: 2-Multi-queue
+  Selects which block-layer the module should instantiate with.
+
+  0: Bio-based.
+  1: Single-queue.
+  2: Multi-queue.
+
+home_node=[0--nr_nodes]: Default: NUMA_NO_NODE
+  Selects what CPU node the data structures are allocated from.
+
+gb=[Size in GB]: Default: 250GB
+  The size of the device reported to the system.
+
+bs=[Block size (in bytes)]: Default: 512 bytes
+  The block size reported to the system.
+
+nr_devices=[Number of devices]: Default: 2
+  Number of block devices instantiated. They are instantiated as /dev/nullb0,
+  etc.
+
+irq_mode=[0-2]: Default: 1-Soft-irq
+  The completion mode used for completing IOs to the block-layer.
+
+  0: None.
+  1: Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
+     when IOs are issued from another CPU node than the home the device is
+     connected to.
+  2: Timer: Waits a specific period (completion_nsec) for each IO before
+     completion.
+
+completion_nsec=[ns]: Default: 10.000ns
+  Combined with irq_mode=2 (timer). The time each completion event must wait.
+
+submit_queues=[0..nr_cpus]:
+  The number of submission queues attached to the device driver. If unset, it
+  defaults to 1 on single-queue and bio-based instances. For multi-queue,
+  it is ignored when use_per_node_hctx module parameter is 1.
+
+hw_queue_depth=[0..qdepth]: Default: 64
+  The hardware queue depth of the device.
+
+III: Multi-queue specific parameters
+
+use_per_node_hctx=[0/1]: Default: 0
+  0: The number of submit queues are set to the value of the submit_queues
+     parameter.
+  1: The multi-queue block layer is instantiated with a hardware dispatch
+     queue for each CPU node in the system.

Documentation/blockdev/floppy.txt

@@ -39,15 +39,15 @@ Module configuration options
 ============================
 
  If you use the floppy driver as a module, use the following syntax:
-modprobe floppy <options>
+modprobe floppy floppy="<options>"
 
 Example:
- modprobe floppy omnibook messages
+ modprobe floppy floppy="omnibook messages"
 
  If you need certain options enabled every time you load the floppy driver,
 you can put:
 
- options floppy omnibook messages
+ options floppy floppy="omnibook messages"
 
 in a configuration file in /etc/modprobe.d/.
 

Documentation/cgroups/memory.txt

@@ -573,15 +573,19 @@ an memcg since the pages are allowed to be allocated from any physical
 node.  One of the use cases is evaluating application performance by
 combining this information with the application's CPU allocation.
 
-We export "total", "file", "anon" and "unevictable" pages per-node for
-each memcg.  The ouput format of memory.numa_stat is:
+Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable"
+per-node page counts including "hierarchical_<counter>" which sums up all
+hierarchical children's values in addition to the memcg's own value.
+
+The ouput format of memory.numa_stat is:
 
 total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
 file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
 anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
 unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+hierarchical_<counter>=<counter pages> N0=<node 0 pages> N1=<node 1 pages> ...
 
-And we have total = file + anon + unevictable.
+The "total" count is sum of file + anon + unevictable.
 
 6. Hierarchy support
 

Documentation/cpu-freq/cpu-drivers.txt

@@ -23,8 +23,8 @@ Contents:
 1.1  Initialization
 1.2  Per-CPU Initialization
 1.3  verify
-1.4  target or setpolicy?
-1.5  target
+1.4  target/target_index or setpolicy?
+1.5  target/target_index
 1.6  setpolicy
 2.   Frequency Table Helpers
 
@@ -56,7 +56,8 @@ cpufreq_driver.init -		A pointer to the per-CPU initialization
 cpufreq_driver.verify -		A pointer to a "verification" function.
 
 cpufreq_driver.setpolicy _or_ 
-cpufreq_driver.target -		See below on the differences.
+cpufreq_driver.target/
+target_index		-	See below on the differences.
 
 And optionally
 
@@ -66,7 +67,7 @@ cpufreq_driver.resume -		A pointer to a per-CPU resume function
 				which is called with interrupts disabled
 				and _before_ the pre-suspend frequency
 				and/or policy is restored by a call to
-				->target or ->setpolicy.
+				->target/target_index or ->setpolicy.
 
 cpufreq_driver.attr -		A pointer to a NULL-terminated list of
 				"struct freq_attr" which allow to
@@ -103,8 +104,8 @@ policy->governor		must contain the "default policy" for
 				this CPU. A few moments later,
 				cpufreq_driver.verify and either
 				cpufreq_driver.setpolicy or
-				cpufreq_driver.target is called with
-				these values.
+				cpufreq_driver.target/target_index is called
+				with these values.
 
 For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
 frequency table helpers might be helpful. See the section 2 for more information
@@ -133,20 +134,28 @@ range) is within policy->min and policy->max. If necessary, increase
 policy->max first, and only if this is no solution, decrease policy->min.
 
 
-1.4 target or setpolicy?
+1.4 target/target_index or setpolicy?
 ----------------------------
 
 Most cpufreq drivers or even most cpu frequency scaling algorithms 
 only allow the CPU to be set to one frequency. For these, you use the
-->target call.
+->target/target_index call.
 
 Some cpufreq-capable processors switch the frequency between certain
 limits on their own. These shall use the ->setpolicy call
 
 
-1.4. target
+1.4. target/target_index
 -------------
 
+The target_index call has two arguments: struct cpufreq_policy *policy,
+and unsigned int index (into the exposed frequency table).
+
+The CPUfreq driver must set the new frequency when called here. The
+actual frequency must be determined by freq_table[index].frequency.
+
+Deprecated:
+----------
 The target call has three arguments: struct cpufreq_policy *policy,
 unsigned int target_frequency, unsigned int relation.
 

Documentation/cpu-freq/governors.txt

@@ -40,7 +40,7 @@ Most cpufreq drivers (in fact, all except one, longrun) or even most
 cpu frequency scaling algorithms only offer the CPU to be set to one
 frequency. In order to offer dynamic frequency scaling, the cpufreq
 core must be able to tell these drivers of a "target frequency". So
-these specific drivers will be transformed to offer a "->target"
+these specific drivers will be transformed to offer a "->target/target_index"
 call instead of the existing "->setpolicy" call. For "longrun", all
 stays the same, though.
 
@@ -71,7 +71,7 @@ CPU can be set to switch independently	 |	   CPU can only be set
 		    /			       the limits of policy->{min,max}
 		   /			            \
 		  /				     \
-	Using the ->setpolicy call,		 Using the ->target call,
+	Using the ->setpolicy call,		 Using the ->target/target_index call,
 	    the limits and the			  the frequency closest
 	     "policy" is set.			  to target_freq is set.
 						  It is assured that it

Documentation/cpu-hotplug.txt

@@ -5,7 +5,7 @@
 			Rusty Russell <rusty@rustcorp.com.au>
 			Srivatsa Vaddagiri <vatsa@in.ibm.com>
 		i386:
-			Zwane Mwaikambo <zwane@arm.linux.org.uk>
+			Zwane Mwaikambo <zwanem@gmail.com>
 		ppc64:
 			Nathan Lynch <nathanl@austin.ibm.com>
 			Joel Schopp <jschopp@austin.ibm.com>

Documentation/cpuidle/governor.txt

@@ -25,5 +25,4 @@ kernel configuration and platform will be selected by cpuidle.
 
 Interfaces:
 extern int cpuidle_register_governor(struct cpuidle_governor *gov);
-extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
 struct cpuidle_governor

Documentation/device-mapper/cache-policies.txt

@@ -30,8 +30,10 @@ multiqueue
 
 This policy is the default.
 
-The multiqueue policy has two sets of 16 queues: one set for entries
-waiting for the cache and another one for those in the cache.
+The multiqueue policy has three sets of 16 queues: one set for entries
+waiting for the cache and another two for those in the cache (a set for
+clean entries and a set for dirty entries).
+
 Cache entries in the queues are aged based on logical time. Entry into
 the cache is based on variable thresholds and queue selection is based
 on hit count on entry. The policy aims to take different cache miss

Documentation/device-mapper/cache.txt

@@ -68,10 +68,11 @@ So large block sizes are bad because they waste cache space.  And small
 block sizes are bad because they increase the amount of metadata (both
 in core and on disk).
 
-Writeback/writethrough
-----------------------
+Cache operating modes
+---------------------
 
-The cache has two modes, writeback and writethrough.
+The cache has three operating modes: writeback, writethrough and
+passthrough.
 
 If writeback, the default, is selected then a write to a block that is
 cached will go only to the cache and the block will be marked dirty in
@@ -81,8 +82,31 @@ If writethrough is selected then a write to a cached block will not
 complete until it has hit both the origin and cache devices.  Clean
 blocks should remain clean.
 
+If passthrough is selected, useful when the cache contents are not known
+to be coherent with the origin device, then all reads are served from
+the origin device (all reads miss the cache) and all writes are
+forwarded to the origin device; additionally, write hits cause cache
+block invalidates.  To enable passthrough mode the cache must be clean.
+Passthrough mode allows a cache device to be activated without having to
+worry about coherency.  Coherency that exists is maintained, although
+the cache will gradually cool as writes take place.  If the coherency of
+the cache can later be verified, or established through use of the
+"invalidate_cblocks" message, the cache device can be transitioned to
+writethrough or writeback mode while still warm.  Otherwise, the cache
+contents can be discarded prior to transitioning to the desired
+operating mode.
+
 A simple cleaner policy is provided, which will clean (write back) all
-dirty blocks in a cache.  Useful for decommissioning a cache.
+dirty blocks in a cache.  Useful for decommissioning a cache or when
+shrinking a cache.  Shrinking the cache's fast device requires all cache
+blocks, in the area of the cache being removed, to be clean.  If the
+area being removed from the cache still contains dirty blocks the resize
+will fail.  Care must be taken to never reduce the volume used for the
+cache's fast device until the cache is clean.  This is of particular
+importance if writeback mode is used.  Writethrough and passthrough
+modes already maintain a clean cache.  Future support to partially clean
+the cache, above a specified threshold, will allow for keeping the cache
+warm and in writeback mode during resize.
 
 Migration throttling
 --------------------
@@ -161,7 +185,7 @@ Constructor
  block size      : cache unit size in sectors
 
  #feature args   : number of feature arguments passed
- feature args    : writethrough.  (The default is writeback.)
+ feature args    : writethrough or passthrough (The default is writeback.)
 
  policy          : the replacement policy to use
  #policy args    : an even number of arguments corresponding to
@@ -177,6 +201,13 @@ Optional feature arguments are:
 		   back cache block contents later for performance reasons,
 		   so they may differ from the corresponding origin blocks.
 
+   passthrough	 : a degraded mode useful for various cache coherency
+		   situations (e.g., rolling back snapshots of
+		   underlying storage).	 Reads and writes always go to
+		   the origin.	If a write goes to a cached origin
+		   block, then the cache block is invalidated.
+		   To enable passthrough mode the cache must be clean.
+
 A policy called 'default' is always registered.  This is an alias for
 the policy we currently think is giving best all round performance.
 
@@ -231,12 +262,28 @@ The message format is:
 E.g.
    dmsetup message my_cache 0 sequential_threshold 1024
 
+
+Invalidation is removing an entry from the cache without writing it
+back.  Cache blocks can be invalidated via the invalidate_cblocks
+message, which takes an arbitrary number of cblock ranges.  Each cblock
+range's end value is "one past the end", meaning 5-10 expresses a range
+of values from 5 to 9.  Each cblock must be expressed as a decimal
+value, in the future a variant message that takes cblock ranges
+expressed in hexidecimal may be needed to better support efficient
+invalidation of larger caches.  The cache must be in passthrough mode
+when invalidate_cblocks is used.
+
+   invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
+
+E.g.
+   dmsetup message my_cache 0 invalidate_cblocks 2345 3456-4567 5678-6789
+
 Examples
 ========
 
 The test suite can be found here:
 
-https://github.com/jthornber/thinp-test-suite
+https://github.com/jthornber/device-mapper-test-suite
 
 dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
 	/dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'

Documentation/device-mapper/dm-crypt.txt

@@ -4,12 +4,15 @@ dm-crypt
 Device-Mapper's "crypt" target provides transparent encryption of block devices
 using the kernel crypto API.
 
+For a more detailed description of supported parameters see:
+http://code.google.com/p/cryptsetup/wiki/DMCrypt
+
 Parameters: <cipher> <key> <iv_offset> <device path> \
 	      <offset> [<#opt_params> <opt_params>]
 
 <cipher>
     Encryption cipher and an optional IV generation mode.
-    (In format cipher[:keycount]-chainmode-ivopts:ivmode).
+    (In format cipher[:keycount]-chainmode-ivmode[:ivopts]).
     Examples:
        des
        aes-cbc-essiv:sha256
@@ -19,7 +22,11 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
 
 <key>
     Key used for encryption. It is encoded as a hexadecimal number.
-    You can only use key sizes that are valid for the selected cipher.
+    You can only use key sizes that are valid for the selected cipher
+    in combination with the selected iv mode.
+    Note that for some iv modes the key string can contain additional
+    keys (for example IV seed) so the key contains more parts concatenated
+    into a single string.
 
 <keycount>
     Multi-key compatibility mode. You can define <keycount> keys and

Documentation/devices.txt

@@ -414,6 +414,7 @@ Your cooperation is appreciated.
 		200 = /dev/net/tun	TAP/TUN network device
 		201 = /dev/button/gulpb	Transmeta GULP-B buttons
 		202 = /dev/emd/ctl	Enhanced Metadisk RAID (EMD) control
+		203 = /dev/cuse		Cuse (character device in user-space)
 		204 = /dev/video/em8300		EM8300 DVD decoder control
 		205 = /dev/video/em8300_mv	EM8300 DVD decoder video
 		206 = /dev/video/em8300_ma	EM8300 DVD decoder audio

Documentation/devicetree/bindings/arc/pmu.txt

@@ -0,0 +1,24 @@
+* ARC Performance Monitor Unit
+
+The ARC 700 can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits.
+
+Note that:
+ * ARC 700 refers to a family of ARC processor cores;
+   - There is only one type of PMU available for the whole family;
+   - The PMU may support different sets of events; supported events are probed
+     at boot time, as required by the reference manual.
+
+ * The ARC 700 PMU does not support interrupts; although HW events may be
+   counted, the HW events themselves cannot serve as a trigger for a sample.
+
+Required properties:
+
+- compatible : should contain
+	"snps,arc700-pmu"
+
+Example:
+
+pmu {
+        compatible = "snps,arc700-pmu";
+};

Documentation/devicetree/bindings/arm/arm-boards

@@ -9,9 +9,53 @@ Required properties (in root node):
 
 FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
 
-In the root node the Integrator/CP must have a /cpcon node pointing
-to the CP control registers, and the Integrator/AP must have a
-/syscon node pointing to the Integrator/AP system controller.
+Required nodes:
+
+- core-module: the root node to the Integrator platforms must have
+  a core-module with regs and the compatible string
+  "arm,core-module-integrator"
+
+  Required properties for the core module:
+  - regs: the location and size of the core module registers, one
+    range of 0x200 bytes.
+
+- syscon: the root node of the Integrator platforms must have a
+  system controller node pointong to the control registers,
+  with the compatible string
+  "arm,integrator-ap-syscon"
+  "arm,integrator-cp-syscon"
+  respectively.
+
+  Required properties for the system controller:
+  - regs: the location and size of the system controller registers,
+    one range of 0x100 bytes.
+
+  Required properties for the AP system controller:
+  - interrupts: the AP syscon node must include the logical module
+    interrupts, stated in order of module instance <module 0>,
+    <module 1>, <module 2> ... for the CP system controller this
+    is not required not of any use.
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator";
+		reg = <0x10000000 0x200>;
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon";
+		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logic module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
+	};
+};
 
 
 ARM Versatile Application and Platform Baseboards

Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt

@@ -4,6 +4,8 @@ Marvell Armada 370 and Armada XP Interrupt Controller
 Required properties:
 - compatible: Should be "marvell,mpic"
 - interrupt-controller: Identifies the node as an interrupt controller.
+- msi-controller: Identifies the node as an PCI Message Signaled
+  Interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. Should be 1.
   The cell is the IRQ number
 
@@ -24,6 +26,7 @@ Example:
               #address-cells = <1>;
               #size-cells = <1>;
               interrupt-controller;
+              msi-controller;
               reg = <0xd0020a00 0x1d0>,
                     <0xd0021070 0x58>;
         };

Documentation/devicetree/bindings/arm/atmel-adc.txt

@@ -7,7 +7,6 @@ Required properties:
   - interrupts: Should contain the IRQ line for the ADC
   - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
     device
-  - atmel,adc-num-channels: Number of channels available in the ADC
   - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
     defined in the datasheet
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
@@ -24,6 +23,13 @@ Optional properties:
 		       resolution will be used.
   - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
   - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
+  - atmel,adc-ts-wires: Number of touch screen wires. Should be 4 or 5. If this
+                        value is set, then adc driver will enable touch screen
+                        support.
+    NOTE: when adc touch screen enabled, the adc hardware trigger will be
+          disabled. Since touch screen will occupied the trigger register.
+  - atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It
+                                     make touch detect more precision.
  
 Optional trigger Nodes:
   - Required properties:

Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt

@@ -1,7 +1,9 @@
 Calxeda DDR memory controller
 
 Properties:
-- compatible : Should be "calxeda,hb-ddr-ctrl"
+- compatible : Should be:
+  - "calxeda,hb-ddr-ctrl" for ECX-1000
+  - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
 - reg : Address and size for DDR controller registers.
 - interrupts : Interrupt for DDR controller.
 

Documentation/devicetree/bindings/arm/cci.txt

@@ -36,14 +36,18 @@ specific to ARM.
 
 	- reg
 		Usage: required
-		Value type: <prop-encoded-array>
+		Value type: Integer cells. A register entry, expressed as a pair
+			    of cells, containing base and size.
 		Definition: A standard property. Specifies base physical
 			    address of CCI control registers common to all
 			    interfaces.
 
 	- ranges:
 		Usage: required
-		Value type: <prop-encoded-array>
+		Value type: Integer cells. An array of range entries, expressed
+			    as a tuple of cells, containing child address,
+			    parent address and the size of the region in the
+			    child address space.
 		Definition: A standard property. Follow rules in the ePAPR for
 			    hierarchical bus addressing. CCI interfaces
 			    addresses refer to the parent node addressing
@@ -74,11 +78,49 @@ specific to ARM.
 
 		- reg:
 			Usage: required
-			Value type: <prop-encoded-array>
+			Value type: Integer cells. A register entry, expressed
+				    as a pair of cells, containing base and
+				    size.
 			Definition: the base address and size of the
 				    corresponding interface programming
 				    registers.
 
+	- CCI PMU node
+
+		Parent node must be CCI interconnect node.
+
+		A CCI pmu node must contain the following properties:
+
+		- compatible
+			Usage: required
+			Value type: <string>
+			Definition: must be "arm,cci-400-pmu"
+
+		- reg:
+			Usage: required
+			Value type: Integer cells. A register entry, expressed
+				    as a pair of cells, containing base and
+				    size.
+			Definition: the base address and size of the
+				    corresponding interface programming
+				    registers.
+
+		- interrupts:
+			Usage: required
+			Value type: Integer cells. Array of interrupt specifier
+				    entries, as defined in
+				    ../interrupt-controller/interrupts.txt.
+			Definition: list of counter overflow interrupts, one per
+				    counter. The interrupts must be specified
+				    starting with the cycle counter overflow
+				    interrupt, followed by counter0 overflow
+				    interrupt, counter1 overflow interrupt,...
+				    ,counterN overflow interrupt.
+
+				    The CCI PMU has an interrupt signal for each
+				    counter. The number of interrupts must be
+				    equal to the number of counters.
+
 * CCI interconnect bus masters
 
 	Description: masters in the device tree connected to a CCI port
@@ -144,7 +186,7 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x6000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
 
 		cci_control0: slave-if@1000 {
 			compatible = "arm,cci-400-ctrl-if";
@@ -163,6 +205,16 @@ Example:
 			interface-type = "ace";
 			reg = <0x5000 0x1000>;
 		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>,
+				      <0 105 4>;
+		};
 	};
 
 This CCI node corresponds to a CCI component whose control registers sits

Documentation/devicetree/bindings/arm/cpus.txt

@@ -1,77 +1,384 @@
-* ARM CPUs binding description
+=================
+ARM CPUs bindings
+=================
 
 The device tree allows to describe the layout of CPUs in a system through
 the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
 defining properties for every cpu.
 
-Bindings for CPU nodes follow the ePAPR standard, available from:
-
-http://devicetree.org
-
-For the ARM architecture every CPU node must contain the following properties:
-
-- device_type:	must be "cpu"
-- reg:		property matching the CPU MPIDR[23:0] register bits
-		reg[31:24] bits must be set to 0
-- compatible:	should be one of:
-		"arm,arm1020"
-		"arm,arm1020e"
-		"arm,arm1022"
-		"arm,arm1026"
-		"arm,arm720"
-		"arm,arm740"
-		"arm,arm7tdmi"
-		"arm,arm920"
-		"arm,arm922"
-		"arm,arm925"
-		"arm,arm926"
-		"arm,arm940"
-		"arm,arm946"
-		"arm,arm9tdmi"
-		"arm,cortex-a5"
-		"arm,cortex-a7"
-		"arm,cortex-a8"
-		"arm,cortex-a9"
-		"arm,cortex-a15"
-		"arm,arm1136"
-		"arm,arm1156"
-		"arm,arm1176"
-		"arm,arm11mpcore"
-		"faraday,fa526"
-		"intel,sa110"
-		"intel,sa1100"
-		"marvell,feroceon"
-		"marvell,mohawk"
-		"marvell,xsc3"
-		"marvell,xscale"
-
-Example:
+Bindings for CPU nodes follow the ePAPR v1.1 standard, available from:
+
+https://www.power.org/documentation/epapr-version-1-1/
+
+with updates for 32-bit and 64-bit ARM systems provided in this document.
+
+================================
+Convention used in this document
+================================
+
+This document follows the conventions described in the ePAPR v1.1, with
+the addition:
+
+- square brackets define bitfields, eg reg[7:0] value of the bitfield in
+  the reg property contained in bits 7 down to 0
+
+=====================================
+cpus and cpu node bindings definition
+=====================================
+
+The ARM architecture, in accordance with the ePAPR, requires the cpus and cpu
+nodes to be present and contain the properties described below.
+
+- cpus node
+
+	Description: Container of cpu nodes
+
+	The node name must be "cpus".
+
+	A cpus node must define the following properties:
+
+	- #address-cells
+		Usage: required
+		Value type: <u32>
+
+		Definition depends on ARM architecture version and
+		configuration:
+
+			# On uniprocessor ARM architectures previous to v7
+			  value must be 1, to enable a simple enumeration
+			  scheme for processors that do not have a HW CPU
+			  identification register.
+			# On 32-bit ARM 11 MPcore, ARM v7 or later systems
+			  value must be 1, that corresponds to CPUID/MPIDR
+			  registers sizes.
+			# On ARM v8 64-bit systems value should be set to 2,
+			  that corresponds to the MPIDR_EL1 register size.
+			  If MPIDR_EL1[63:32] value is equal to 0 on all CPUs
+			  in the system, #address-cells can be set to 1, since
+			  MPIDR_EL1[63:32] bits are not used for CPUs
+			  identification.
+	- #size-cells
+		Usage: required
+		Value type: <u32>
+		Definition: must be set to 0
+
+- cpu node
+
+	Description: Describes a CPU in an ARM based system
+
+	PROPERTIES
+
+	- device_type
+		Usage: required
+		Value type: <string>
+		Definition: must be "cpu"
+	- reg
+		Usage and definition depend on ARM architecture version and
+		configuration:
+
+			# On uniprocessor ARM architectures previous to v7
+			  this property is required and must be set to 0.
+
+			# On ARM 11 MPcore based systems this property is
+			  required and matches the CPUID[11:0] register bits.
+
+			  Bits [11:0] in the reg cell must be set to
+			  bits [11:0] in CPU ID register.
+
+			  All other bits in the reg cell must be set to 0.
+
+			# On 32-bit ARM v7 or later systems this property is
+			  required and matches the CPU MPIDR[23:0] register
+			  bits.
+
+			  Bits [23:0] in the reg cell must be set to
+			  bits [23:0] in MPIDR.
+
+			  All other bits in the reg cell must be set to 0.
+
+			# On ARM v8 64-bit systems this property is required
+			  and matches the MPIDR_EL1 register affinity bits.
+
+			  * If cpus node's #address-cells property is set to 2
+
+			    The first reg cell bits [7:0] must be set to
+			    bits [39:32] of MPIDR_EL1.
+
+			    The second reg cell bits [23:0] must be set to
+			    bits [23:0] of MPIDR_EL1.
+
+			  * If cpus node's #address-cells property is set to 1
+
+			    The reg cell bits [23:0] must be set to bits [23:0]
+			    of MPIDR_EL1.
+
+			  All other bits in the reg cells must be set to 0.
+
+	- compatible:
+		Usage: required
+		Value type: <string>
+		Definition: should be one of:
+			    "arm,arm710t"
+			    "arm,arm720t"
+			    "arm,arm740t"
+			    "arm,arm7ej-s"
+			    "arm,arm7tdmi"
+			    "arm,arm7tdmi-s"
+			    "arm,arm9es"
+			    "arm,arm9ej-s"
+			    "arm,arm920t"
+			    "arm,arm922t"
+			    "arm,arm925"
+			    "arm,arm926e-s"
+			    "arm,arm926ej-s"
+			    "arm,arm940t"
+			    "arm,arm946e-s"
+			    "arm,arm966e-s"
+			    "arm,arm968e-s"
+			    "arm,arm9tdmi"
+			    "arm,arm1020e"
+			    "arm,arm1020t"
+			    "arm,arm1022e"
+			    "arm,arm1026ej-s"
+			    "arm,arm1136j-s"
+			    "arm,arm1136jf-s"
+			    "arm,arm1156t2-s"
+			    "arm,arm1156t2f-s"
+			    "arm,arm1176jzf"
+			    "arm,arm1176jz-s"
+			    "arm,arm1176jzf-s"
+			    "arm,arm11mpcore"
+			    "arm,cortex-a5"
+			    "arm,cortex-a7"
+			    "arm,cortex-a8"
+			    "arm,cortex-a9"
+			    "arm,cortex-a15"
+			    "arm,cortex-a53"
+			    "arm,cortex-a57"
+			    "arm,cortex-m0"
+			    "arm,cortex-m0+"
+			    "arm,cortex-m1"
+			    "arm,cortex-m3"
+			    "arm,cortex-m4"
+			    "arm,cortex-r4"
+			    "arm,cortex-r5"
+			    "arm,cortex-r7"
+			    "faraday,fa526"
+			    "intel,sa110"
+			    "intel,sa1100"
+			    "marvell,feroceon"
+			    "marvell,mohawk"
+			    "marvell,pj4a"
+			    "marvell,pj4b"
+			    "marvell,sheeva-v5"
+			    "qcom,krait"
+			    "qcom,scorpion"
+	- enable-method
+		Value type: <stringlist>
+		Usage and definition depend on ARM architecture version.
+			# On ARM v8 64-bit this property is required and must
+			  be one of:
+			     "spin-table"
+			     "psci"
+			# On ARM 32-bit systems this property is optional.
+
+	- cpu-release-addr
+		Usage: required for systems that have an "enable-method"
+		       property value of "spin-table".
+		Value type: <prop-encoded-array>
+		Definition:
+			# On ARM v8 64-bit systems must be a two cell
+			  property identifying a 64-bit zero-initialised
+			  memory location.
+
+Example 1 (dual-cluster big.LITTLE system 32-bit):
 
 	cpus {
 		#size-cells = <0>;
 		#address-cells = <1>;
 
-		CPU0: cpu@0 {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 		};
 
-		CPU1: cpu@1 {
+		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 		};
 
-		CPU2: cpu@100 {
+		cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 		};
 
-		CPU3: cpu@101 {
+		cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 		};
 	};
+
+Example 2 (Cortex-A8 uniprocessor 32-bit system):
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+Example 3 (ARM 926EJ-S uniprocessor 32-bit system):
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+Example 4 (ARM Cortex-A57 64-bit system):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <2>;
+
+	cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@10101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100000101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	cpu@100010101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+};

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
 Required properties:
 - compatible : Should be "ti,omap3-mpu" for OMAP3
                Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
 Examples:
 
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
 - For an OMAP4 SMP system:
 
 mpu {

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -21,7 +21,8 @@ Required properties:
 Optional properties:
 - ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
   during suspend.
-
+- ti,no-reset-on-init: When present, the module should not be reset at init
+- ti,no-idle-on-init: When present, the module should not be idled at init
 
 Example:
 

Documentation/devicetree/bindings/arm/pmu.txt

@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,armv8-pmuv3"
 	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -49,7 +49,7 @@ adc@12D10000 {
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
 		compatible = "ntc,ncp15wb473";
-		pullup-uV = <1800000>;
+		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;

Documentation/devicetree/bindings/arm/topology.txt

@@ -0,0 +1,474 @@
+===========================================
+ARM topology binding description
+===========================================
+
+===========================================
+1 - Introduction
+===========================================
+
+In an ARM system, the hierarchy of CPUs is defined through three entities that
+are used to describe the layout of physical CPUs in the system:
+
+- cluster
+- core
+- thread
+
+The cpu nodes (bindings defined in [1]) represent the devices that
+correspond to physical CPUs and are to be mapped to the hierarchy levels.
+
+The bottom hierarchy level sits at core or thread level depending on whether
+symmetric multi-threading (SMT) is supported or not.
+
+For instance in a system where CPUs support SMT, "cpu" nodes represent all
+threads existing in the system and map to the hierarchy level "thread" above.
+In systems where SMT is not supported "cpu" nodes represent all cores present
+in the system and map to the hierarchy level "core" above.
+
+ARM topology bindings allow one to associate cpu nodes with hierarchical groups
+corresponding to the system hierarchy; syntactically they are defined as device
+tree nodes.
+
+The remainder of this document provides the topology bindings for ARM, based
+on the ePAPR standard, available from:
+
+http://www.power.org/documentation/epapr-version-1-1/
+
+If not stated otherwise, whenever a reference to a cpu node phandle is made its
+value must point to a cpu node compliant with the cpu node bindings as
+documented in [1].
+A topology description containing phandles to cpu nodes that are not compliant
+with bindings standardized in [1] is therefore considered invalid.
+
+===========================================
+2 - cpu-map node
+===========================================
+
+The ARM CPU topology is defined within the cpu-map node, which is a direct
+child of the cpus node and provides a container where the actual topology
+nodes are listed.
+
+- cpu-map node
+
+	Usage: Optional - On ARM SMP systems provide CPUs topology to the OS.
+			  ARM uniprocessor systems do not require a topology
+			  description and therefore should not define a
+			  cpu-map node.
+
+	Description: The cpu-map node is just a container node where its
+		     subnodes describe the CPU topology.
+
+	Node name must be "cpu-map".
+
+	The cpu-map node's parent node must be the cpus node.
+
+	The cpu-map node's child nodes can be:
+
+	- one or more cluster nodes
+
+	Any other configuration is considered invalid.
+
+The cpu-map node can only contain three types of child nodes:
+
+- cluster node
+- core node
+- thread node
+
+whose bindings are described in paragraph 3.
+
+The nodes describing the CPU topology (cluster/core/thread) can only be
+defined within the cpu-map node.
+Any other configuration is consider invalid and therefore must be ignored.
+
+===========================================
+2.1 - cpu-map child nodes naming convention
+===========================================
+
+cpu-map child nodes must follow a naming convention where the node name
+must be "clusterN", "coreN", "threadN" depending on the node type (ie
+cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which
+are siblings within a single common parent node must be given a unique and
+sequential N value, starting from 0).
+cpu-map child nodes which do not share a common parent node can have the same
+name (ie same number N as other cpu-map child nodes at different device tree
+levels) since name uniqueness will be guaranteed by the device tree hierarchy.
+
+===========================================
+3 - cluster/core/thread node bindings
+===========================================
+
+Bindings for cluster/cpu/thread nodes are defined as follows:
+
+- cluster node
+
+	 Description: must be declared within a cpu-map node, one node
+		      per cluster. A system can contain several layers of
+		      clustering and cluster nodes can be contained in parent
+		      cluster nodes.
+
+	The cluster node name must be "clusterN" as described in 2.1 above.
+	A cluster node can not be a leaf node.
+
+	A cluster node's child nodes must be:
+
+	- one or more cluster nodes; or
+	- one or more core nodes
+
+	Any other configuration is considered invalid.
+
+- core node
+
+	Description: must be declared in a cluster node, one node per core in
+		     the cluster. If the system does not support SMT, core
+		     nodes are leaf nodes, otherwise they become containers of
+		     thread nodes.
+
+	The core node name must be "coreN" as described in 2.1 above.
+
+	A core node must be a leaf node if SMT is not supported.
+
+	Properties for core nodes that are leaf nodes:
+
+	- cpu
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle to the cpu node that corresponds to the
+			    core node.
+
+	If a core node is not a leaf node (CPUs supporting SMT) a core node's
+	child nodes can be:
+
+	- one or more thread nodes
+
+	Any other configuration is considered invalid.
+
+- thread node
+
+	Description: must be declared in a core node, one node per thread
+		     in the core if the system supports SMT. Thread nodes are
+		     always leaf nodes in the device tree.
+
+	The thread node name must be "threadN" as described in 2.1 above.
+
+	A thread node must be a leaf node.
+
+	A thread node must contain the following property:
+
+	- cpu
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle to the cpu node that corresponds to
+			    the thread node.
+
+===========================================
+4 - Example dts
+===========================================
+
+Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <2>;
+
+	cpu-map {
+		cluster0 {
+			cluster0 {
+				core0 {
+					thread0 {
+						cpu = <&CPU0>;
+					};
+					thread1 {
+						cpu = <&CPU1>;
+					};
+				};
+
+				core1 {
+					thread0 {
+						cpu = <&CPU2>;
+					};
+					thread1 {
+						cpu = <&CPU3>;
+					};
+				};
+			};
+
+			cluster1 {
+				core0 {
+					thread0 {
+						cpu = <&CPU4>;
+					};
+					thread1 {
+						cpu = <&CPU5>;
+					};
+				};
+
+				core1 {
+					thread0 {
+						cpu = <&CPU6>;
+					};
+					thread1 {
+						cpu = <&CPU7>;
+					};
+				};
+			};
+		};
+
+		cluster1 {
+			cluster0 {
+				core0 {
+					thread0 {
+						cpu = <&CPU8>;
+					};
+					thread1 {
+						cpu = <&CPU9>;
+					};
+				};
+				core1 {
+					thread0 {
+						cpu = <&CPU10>;
+					};
+					thread1 {
+						cpu = <&CPU11>;
+					};
+				};
+			};
+
+			cluster1 {
+				core0 {
+					thread0 {
+						cpu = <&CPU12>;
+					};
+					thread1 {
+						cpu = <&CPU13>;
+					};
+				};
+				core1 {
+					thread0 {
+						cpu = <&CPU14>;
+					};
+					thread1 {
+						cpu = <&CPU15>;
+					};
+				};
+			};
+		};
+	};
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU4: cpu@10000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU5: cpu@10001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU6: cpu@10100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU7: cpu@10101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU8: cpu@100000000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU9: cpu@100000001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU10: cpu@100000100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU11: cpu@100000101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU12: cpu@100010000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU13: cpu@100010001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU14: cpu@100010100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU15: cpu@100010101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+};
+
+Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <1>;
+
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&CPU0>;
+			};
+			core1 {
+				cpu = <&CPU1>;
+			};
+			core2 {
+				cpu = <&CPU2>;
+			};
+			core3 {
+				cpu = <&CPU3>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&CPU4>;
+			};
+			core1 {
+				cpu = <&CPU5>;
+			};
+			core2 {
+				cpu = <&CPU6>;
+			};
+			core3 {
+				cpu = <&CPU7>;
+			};
+		};
+	};
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x0>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x1>;
+	};
+
+	CPU2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x2>;
+	};
+
+	CPU3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x3>;
+	};
+
+	CPU4: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x100>;
+	};
+
+	CPU5: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x101>;
+	};
+
+	CPU6: cpu@102 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x102>;
+	};
+
+	CPU7: cpu@103 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x103>;
+	};
+};
+
+===============================================================================
+[1] ARM Linux kernel documentation
+    Documentation/devicetree/bindings/arm/cpus.txt

Documentation/devicetree/bindings/arm/vic.txt

@@ -18,6 +18,15 @@ Required properties:
 Optional properties:
 
 - interrupts : Interrupt source for parent controllers if the VIC is nested.
+- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
+  represents single interrupt source, starting from source 0 at LSb and ending
+  at source 31 at MSb. A bit that is set means that the source is wired and
+  clear means otherwise. If unspecified, defaults to all valid.
+- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
+  configured as wake up source for the system. Order of bits is the same as for
+  valid-mask property. A set bit means that this interrupt source can be
+  configured as a wake up source for the system. If unspecied, defaults to all
+  interrupt sources configurable as wake up sources.
 
 Example:
 
@@ -26,4 +35,7 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		reg = <0x60000 0x1000>;
+
+		valid-mask = <0xffffff7f>;
+		valid-wakeup-mask = <0x0000ff7f>;
 	};

Documentation/devicetree/bindings/clock/efm32-clock.txt

@@ -0,0 +1,11 @@
+* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
+
+Required properties:
+- compatible: Should be "efm32gg,cmu"
+- reg: Base address and length of the register set
+- interrupts: Interrupt used by the CMU
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock ID in
+its "clocks" phandle cell. The header efm32-clk.h contains a list of available
+IDs.

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
   - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
 

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
 
 - reg: physical base address of the controller and length of memory mapped
@@ -159,6 +159,8 @@ clock which they consume.
   mixer			343
   hdmi			344
   g2d			345
+  mdma0			346
+  smmu_mdma0		347
 
 
    [Clock Muxes]

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
 
 Required Properties:
 
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
 
 - reg: physical base address of the controller and length of memory mapped
   region.

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -215,6 +215,11 @@ clocks and IDs.
 	cko2      		200
 	cko      		201
 	vdoa      		202
+	pll4_audio_div		203
+	lvds1_sel		204
+	lvds2_sel		205
+	lvds1_gate		206
+	lvds2_gate		207
 
 Examples:
 

Documentation/devicetree/bindings/clock/keystone-gate.txt

@@ -0,0 +1,29 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for Keystone gate control driver which uses PSC controller IP.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,keystone,psc-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : parent clock phandle
+- reg :	psc control and domain address address space
+- reg-names : psc control and domain registers
+- domain-id : psc domain id needed to check the transition state register
+
+Optional properties:
+- clock-output-names : From common clock binding to override the
+			default output clock name
+Example:
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};

Documentation/devicetree/bindings/clock/keystone-pll.txt

@@ -0,0 +1,84 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for keystone PLLs. The main PLL IP typically has a multiplier,
+a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
+and PAPLL are controlled by the memory mapped register where as the Main
+PLL is controlled by a PLL controller registers along with memory mapped
+registers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
+- clocks : parent clock phandle
+- reg - pll control0 and pll multipler registers
+- reg-names : control and multiplier. The multiplier is applicable only for
+		main pll clock
+- fixed-postdiv : fixed post divider value
+
+Example:
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclkmain>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-mux-clock"
+- clocks : link phandles of parent clocks
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the mux
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-divider-clock"
+- clocks : parent clock phandle
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the divider
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};

Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt

@@ -0,0 +1,19 @@
+* Core Divider Clock bindings for Marvell MVEBU SoCs
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = nand (NAND clock)
+
+Required properties:
+- compatible : must be "marvell,armada-370-corediv-clock"
+- reg : must be the register address of Core Divider control register
+- #clock-cells : from common clock binding; shall be set to 1
+- clocks : must be set to the parent's phandle
+
+Example:
+
+corediv_clk: corediv-clocks@18740 {
+	compatible = "marvell,armada-370-corediv-clock";
+	reg = <0x18740 0xc>;
+	#clock-cells = <1>;
+	clocks = <&pll>;
+};

Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt

@@ -1,10 +1,10 @@
-* Gated Clock bindings for Marvell Orion SoCs
+* Gated Clock bindings for Marvell EBU SoCs
 
-Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
-some power. The clock consumer should specify the desired clock by having
-the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
-the corresponding clock gating control bit in HW to ease manual clock lookup
-in datasheet.
+Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be
+gated to save some power. The clock consumer should specify the desired clock
+by having the clock ID in its "clocks" phandle cell. The clock ID is directly
+mapped to the corresponding clock gating control bit in HW to ease manual clock
+lookup in datasheet.
 
 The following is a list of provided IDs for Armada 370:
 ID	Clock	Peripheral
@@ -94,6 +94,8 @@ ID	Clock	Peripheral
 
 Required properties:
 - compatible : shall be one of the following:
+	"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
+	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
 	"marvell,dove-gating-clock" - for Dove SoC clock gating
 	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
 - reg : shall be the register address of the Clock Gating Control register

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -45,8 +45,8 @@ Additionally, "allwinner,*-gates-clk" clocks require:
 
 Clock consumers should specify the desired clocks they use with a
 "clocks" phandle cell. Consumers that are using a gated clock should
-provide an additional ID in their clock property. The values of this
-ID are documented in sunxi/<soc>-gates.txt.
+provide an additional ID in their clock property. This ID is the
+offset of the bit controlling this particular gate in the register.
 
 For example:
 

Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt

@@ -1,93 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2*
-    EHCI1					3
-    OHCI1					4*
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-    MS						12**
-    NAND					13
-    SDRAM					14
-
-    ACE						16
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-    PATA					24
-    SATA					25**
-    GPS						26*
-
-    VE						32
-    TVD						33
-    TVE0					34
-    TVE1					35
-    LCD0					36
-    LCD1					37
-
-    CSI0					40
-    CSI1					41
-
-    HDMI					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    MP						50
-
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
-
-    CODEC					0
-    SPDIF					1*
-    AC97					2
-    IIS						3
-
-    PIO						5
-    IR0						6
-    IR1						7
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    CAN						4
-    SCR						5
-    PS20					6
-    PS21					7
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-    UART6					22
-    UART7					23
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt

@@ -1,75 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun5i-a10s-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2
-
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-
-    NAND					13
-    SDRAM					14
-
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-
-    GPS						26
-
-    HSTIMER					28
-
-    VE						32
-
-    TVE						34
-
-    LCD						36
-
-    CSI						40
-
-    HDMI					43
-    DE_BE					44
-
-    DE_FE					46
-
-    IEP						51
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun5i-a10s-apb0-gates-clk")
-
-    CODEC					0
-
-    IIS						3
-
-    PIO						5
-    IR						6
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun5i-a10s-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt

@@ -1,58 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun5i-a13-ahb-gates-clk")
-
-    USBOTG					0
-    EHCI					1
-    OHCI					2
-
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-
-    NAND					13
-    SDRAM					14
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-
-    STIMER					28
-
-    VE						32
-
-    LCD						36
-
-    CSI						40
-
-    DE_BE					44
-
-    DE_FE					46
-
-    IEP						51
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk")
-
-    CODEC					0
-
-    PIO						5
-    IR						6
-
-  * APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    UART1					17
-
-    UART3					19

Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt

@@ -1,83 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
-
-    MIPI DSI					1
-
-    SS						5
-    DMA						6
-
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-
-    NAND1					12
-    NAND0					13
-    SDRAM					14
-
-    GMAC					17
-    TS						18
-    HSTIMER					19
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-    USB_OTG					24
-
-    EHCI0					26
-    EHCI1					27
-
-    OHCI0					29
-    OHCI1					30
-    OHCI2					31
-    VE						32
-
-    LCD0					36
-    LCD1					37
-
-    CSI						40
-
-    HDMI					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    MP						50
-
-    GPU						52
-
-    DEU0					55
-    DEU1					56
-    DRC0					57
-    DRC1					58
-
-  * APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
-
-    CODEC					0
-
-    DIGITAL MIC					4
-    PIO						5
-
-    DAUDIO0					12
-    DAUDIO1					13
-
-  * APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-    I2C3					3
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt

@@ -1,98 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2
-    EHCI1					3
-    OHCI1					4
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-    MS						12
-    NAND					13
-    SDRAM					14
-
-    ACE						16
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-
-    SATA					25
-
-    HSTIMER					28
-
-    VE						32
-    TVD						33
-    TVE0					34
-    TVE1					35
-    LCD0					36
-    LCD1					37
-
-    CSI0					40
-    CSI1					41
-
-    HDMI1					42
-    HDMI0					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    GMAC					49
-    MP						50
-
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
-
-    CODEC					0
-    SPDIF					1
-    AC97					2
-    IIS0					3
-    IIS1					4
-    PIO						5
-    IR0						6
-    IR1						7
-    IIS2					8
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-    I2C3					3
-    CAN						4
-    SCR						5
-    PS20					6
-    PS21					7
-
-    I2C4					15
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-    UART6					22
-    UART7					23
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/clock/xgene.txt

@@ -0,0 +1,111 @@
+Device Tree Clock bindings for APM X-Gene
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
+	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-device-clock" - for a X-Gene device clock
+
+Required properties for SoC or PCP PLL clocks:
+- reg : shall be the physical PLL register address for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the PLL referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the PLL. If missing, use the device name.
+
+Required properties for device clocks:
+- reg : shall be a list of address and length pairs describing the CSR
+         reset and/or the divider. Either may be omitted, but at least
+         one must be present.
+ - reg-names : shall be a string list describing the reg resource. This
+               may include "csr-reg" and/or "div-reg". If this property
+               is not present, the reg property is assumed to describe
+               only "csr-reg".
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the device referenced.
+Optional properties for device clocks:
+- clock-names : shall be the name of the device clock. If missing, use the
+                device name.
+- csr-offset : Offset to the CSR reset register from the reset address base.
+               Default is 0.
+- csr-mask : CSR reset mask bit. Default is 0xF.
+- enable-offset : Offset to the enable register from the reset address base.
+                  Default is 0x8.
+- enable-mask : CSR enable mask bit. Default is 0xF.
+- divider-offset : Offset to the divider CSR register from the divider base.
+                   Default is 0x0.
+- divider-width : Width of the divider register. Default is 0.
+- divider-shift : Bit shift of the divider register. Default is 0.
+
+For example:
+
+	pcppll: pcppll@17000100 {
+		compatible = "apm,xgene-pcppll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "pcppll";
+		reg = <0x0 0x17000100 0x0 0x1000>;
+		clock-output-names = "pcppll";
+		type = <0>;
+	};
+
+	socpll: socpll@17000120 {
+		compatible = "apm,xgene-socpll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "socpll";
+		reg = <0x0 0x17000120 0x0 0x1000>;
+		clock-output-names = "socpll";
+		type = <1>;
+	};
+
+	qmlclk: qmlclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "qmlclk";
+		reg = <0x0 0x1703C000 0x0 0x1000>;
+		reg-name = "csr-reg";
+		clock-output-names = "qmlclk";
+	};
+
+	ethclk: ethclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "ethclk";
+		reg = <0x0 0x17000000 0x0 0x1000>;
+		reg-names = "div-reg";
+		divider-offset = <0x238>;
+		divider-width = <0x9>;
+		divider-shift = <0x0>;
+		clock-output-names = "ethclk";
+	};
+
+	apbclk: apbclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&ahbclk 0>;
+		clock-names = "apbclk";
+		reg = <0x0 0x1F2AC000 0x0 0x1000
+			0x0 0x1F2AC000 0x0 0x1000>;
+		reg-names = "csr-reg", "div-reg";
+		csr-offset = <0x0>;
+		csr-mask = <0x200>;
+		enable-offset = <0x8>;
+		enable-mask = <0x200>;
+		divider-offset = <0x10>;
+		divider-width = <0x2>;
+		divider-shift = <0x0>;
+		flags = <0x8>;
+		clock-output-names = "apbclk";
+	};
+

Documentation/devicetree/bindings/crypto/omap-aes.txt

@@ -0,0 +1,31 @@
+OMAP SoC AES crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  AES versions:
+  - "ti,omap2-aes" for OMAP2.
+  - "ti,omap3-aes" for OMAP3.
+  - "ti,omap4-aes" for OMAP4 and AM33XX.
+  Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
+  more algorithms) but they are incompatible with OMAP4.
+- ti,hwmods: Name of the hwmod associated with the AES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the AES module.
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+
+Example:
+	/* AM335x */
+	aes: aes@53500000 {
+		compatible = "ti,omap4-aes";
+		ti,hwmods = "aes";
+		reg = <0x53500000 0xa0>;
+		interrupts = <102>;
+		dmas = <&edma 6>,
+		       <&edma 5>;
+		dma-names = "tx", "rx";
+	};

Documentation/devicetree/bindings/crypto/omap-des.txt

@@ -0,0 +1,30 @@
+OMAP SoC DES crypto Module
+
+Required properties:
+
+- compatible : Should contain "ti,omap4-des"
+- ti,hwmods: Name of the hwmod associated with the DES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the DES module
+- clocks : A phandle to the functional clock node of the DES module
+           corresponding to each entry in clock-names
+- clock-names : Name of the functional clock, should be "fck"
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+	Each entry corresponds to an entry in dma-names
+- dma-names: DMA request names should include "tx" and "rx" if present
+
+Example:
+	/* DRA7xx SoC */
+	des: des@480a5000 {
+		compatible = "ti,omap4-des";
+		ti,hwmods = "des";
+		reg = <0x480a5000 0xa0>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&sdma 117>, <&sdma 116>;
+		dma-names = "tx", "rx";
+		clocks = <&l3_iclk_div>;
+		clock-names = "fck";
+	};

Documentation/devicetree/bindings/crypto/omap-sham.txt

@@ -0,0 +1,28 @@
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SHAM versions:
+  - "ti,omap2-sham" for OMAP2 & OMAP3.
+  - "ti,omap4-sham" for OMAP4 and AM33XX.
+  - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifiers for the rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+	/* AM335x */
+	sham: sham@53100000 {
+		compatible = "ti,omap4-sham";
+		ti,hwmods = "sham";
+		reg = <0x53100000 0x200>;
+		interrupts = <109>;
+		dmas = <&edma 36>;
+		dma-names = "rx";
+	};

Documentation/devicetree/bindings/dma/atmel-dma.txt

@@ -28,7 +28,7 @@ The three cells in order are:
 dependent:
   - bit 7-0: peripheral identifier for the hardware handshaking interface. The
   identifier can be different for tx and rx.
-  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
+  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
 
 Example:
 

Documentation/devicetree/bindings/gpio/8xxx_gpio.txt

@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
 
 Every GPIO controller node must have #gpio-cells property defined,
 this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
 
 Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
-  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
-   services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupt-parent:	Phandle for the interrupt controller that
+			services interrupts for this device.
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
 
 Example of gpio-controller nodes for a MPC8347 SoC:
 
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xc00 0x100>;
-		interrupts = <74 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
 		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
 	gpio2: gpio-controller@d00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xd00 0x100>;
-		interrupts = <75 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
 		gpio-controller;
 	};
 
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
-	2 = trigger on falling edge
-	3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
 
 	funkyfpga@0 {
 		compatible = "funky-fpga";
 		...
-		interrupts = <4 3>;
 		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
 	};

Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt

@@ -0,0 +1,36 @@
+* Abilis TB10x GPIO controller
+
+Required Properties:
+- compatible: Should be "abilis,tb10x-gpio"
+- reg: Address and length of the register set for the device
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+   - bit 0 specifies polarity (0 for normal, 1 for inverted).
+- abilis,ngpio: the number of GPIO pins this driver controls.
+
+Optional Properties:
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
+- interrupts: Defines the interrupt line connecting this GPIO controller to
+  its parent interrupt controller.
+- interrupt-parent: Defines the parent interrupt controller.
+
+GPIO ranges are specified as described in
+Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+	gpioa: gpio@FF140000 {
+		compatible = "abilis,tb10x-gpio";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&tb10x_ictl>;
+		interrupts = <27 2>;
+		reg = <0xFF140000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		abilis,ngpio = <3>;
+		gpio-ranges = <&iomux 0 0 0>;
+		gpio-ranges-group-names = "gpioa_pins";
+	};

Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt

@@ -0,0 +1,52 @@
+Broadcom Kona Family GPIO
+=========================
+
+This GPIO driver is used in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+The Broadcom GPIO Controller IP can be configured prior to synthesis to
+support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
+GPIO controller only supports edge, not level, triggering of interrupts.
+
+Required properties
+-------------------
+
+- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+  interrupt per GPIO bank. The number of interrupts listed depends on the
+  number of GPIO banks on the SoC. The interrupts must be ordered by bank,
+  starting with bank 0. There is always a 1:1 mapping between banks and
+  IRQs.
+- #gpio-cells: Should be <2>. The first cell is the pin number, the second
+  cell is used to specify optional parameters:
+  - bit 0 specifies polarity (0 for normal, 1 for inverted)
+  See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The
+  second cell is used to specify flags. The following subset of flags is
+  supported:
+  - trigger type (bits[1:0]):
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      3 = low-to-high or high-to-low edge triggered
+      Valid values are 1, 2, 3
+  See also .../devicetree/bindings/interrupt-controller/interrupts.txt.
+- gpio-controller: Marks the device node as a GPIO controller.
+- interrupt-controller: Marks the device node as an interrupt controller.
+
+Example:
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};

Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt

@@ -0,0 +1,71 @@
+* PCF857x-compatible I/O expanders
+
+The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
+driven high by a pull-up current source or driven low to ground. This combines
+the direction and output level into a single bit per line, which can't be read
+back. We can't actually know at initialization time whether a line is configured
+(a) as output and driving the signal low/high, or (b) as input and reporting a
+low/high value, without knowing the last value written since the chip came out
+of reset (if any). The only reliable solution for setting up line direction is
+thus to do it explicitly.
+
+Required Properties:
+
+  - compatible: should be one of the following.
+    - "maxim,max7328": For the Maxim MAX7378
+    - "maxim,max7329": For the Maxim MAX7329
+    - "nxp,pca8574": For the NXP PCA8574
+    - "nxp,pca8575": For the NXP PCA8575
+    - "nxp,pca9670": For the NXP PCA9670
+    - "nxp,pca9671": For the NXP PCA9671
+    - "nxp,pca9672": For the NXP PCA9672
+    - "nxp,pca9673": For the NXP PCA9673
+    - "nxp,pca9674": For the NXP PCA9674
+    - "nxp,pca9675": For the NXP PCA9675
+    - "nxp,pcf8574": For the NXP PCF8574
+    - "nxp,pcf8574a": For the NXP PCF8574A
+    - "nxp,pcf8575": For the NXP PCF8575
+    - "ti,tca9554": For the TI TCA9554
+
+  - reg: I2C slave address.
+
+  - gpio-controller: Marks the device node as a gpio controller.
+  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+
+Optional Properties:
+
+  - lines-initial-states: Bitmask that specifies the initial state of each
+  line. When a bit is set to zero, the corresponding line will be initialized to
+  the input (pulled-up) state. When the  bit is set to one, the line will be
+  initialized the the low-level output state. If the property is not specified
+  all lines will be initialized to the input state.
+
+  The I/O expander can detect input state changes, and thus optionally act as
+  an interrupt controller. When the expander interrupt line is connected all the
+  following properties must be set. For more information please see the
+  interrupt controller device tree bindings documentation available at
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+  - interrupt-controller: Identifies the node as an interrupt controller.
+  - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifier for the controllers interrupt.
+
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example: PCF8575 I/O expander node
+
+	pcf8575: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&irqpin2>;
+		interrupts = <3 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};

Documentation/devicetree/bindings/gpio/gpio.txt

@@ -87,8 +87,10 @@ controllers. The gpio-ranges property described below represents this, and
 contains information structures as follows:
 
 	gpio-range-list ::= <single-gpio-range> [gpio-range-list]
-	single-gpio-range ::=
+	single-gpio-range ::= <numeric-gpio-range> | <named-gpio-range>
+	numeric-gpio-range ::=
 			<pinctrl-phandle> <gpio-base> <pinctrl-base> <count>
+	named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>'
 	gpio-phandle : phandle to pin controller node.
 	gpio-base : Base GPIO ID in the GPIO controller
 	pinctrl-base : Base pinctrl pin ID in the pin controller
@@ -97,6 +99,19 @@ contains information structures as follows:
 The "pin controller node" mentioned above must conform to the bindings
 described in ../pinctrl/pinctrl-bindings.txt.
 
+In case named gpio ranges are used (ranges with both <pinctrl-base> and
+<count> set to 0), the property gpio-ranges-group-names contains one string
+for every single-gpio-range in gpio-ranges:
+	gpiorange-names-list ::= <gpiorange-name> [gpiorange-names-list]
+	gpiorange-name : Name of the pingroup associated to the GPIO range in
+			the respective pin controller.
+
+Elements of gpiorange-names-list corresponding to numeric ranges contain
+the empty string. Elements of gpiorange-names-list corresponding to named
+ranges contain the name of a pin group defined in the respective pin
+controller. The number of pins/GPIOs in the range is the number of pins in
+that pin group.
+
 Previous versions of this binding required all pin controller nodes that
 were referenced by any gpio-ranges property to contain a property named
 #gpio-range-cells with value <3>. This requirement is now deprecated.
@@ -104,7 +119,7 @@ However, that property may still exist in older device trees for
 compatibility reasons, and would still be required even in new device
 trees that need to be compatible with older software.
 
-Example:
+Example 1:
 
 	qe_pio_e: gpio-controller@1460 {
 		#gpio-cells = <2>;
@@ -117,3 +132,24 @@ Example:
 Here, a single GPIO controller has GPIOs 0..9 routed to pin controller
 pinctrl1's pins 20..29, and GPIOs 10..19 routed to pin controller pinctrl2's
 pins 50..59.
+
+Example 2:
+
+	gpio_pio_i: gpio-controller@14B0 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1480 0x18>;
+		gpio-controller;
+		gpio-ranges =			<&pinctrl1 0 20 10>,
+						<&pinctrl2 10 0 0>,
+						<&pinctrl1 15 0 10>,
+						<&pinctrl2 25 0 0>;
+		gpio-ranges-group-names =	"",
+						"foo",
+						"",
+						"bar";
+	};
+
+Here, three GPIO ranges are defined wrt. two pin controllers. pinctrl1 GPIO
+ranges are defined using pin numbers whereas the GPIO ranges wrt. pinctrl2
+are named "foo" and "bar".

Documentation/devicetree/bindings/hwmon/lm90.txt

@@ -0,0 +1,44 @@
+* LM90 series thermometer.
+
+Required node properties:
+- compatible: manufacturer and chip name, one of
+		"adi,adm1032"
+		"adi,adt7461"
+		"adi,adt7461a"
+		"gmt,g781"
+		"national,lm90"
+		"national,lm86"
+		"national,lm89"
+		"national,lm99"
+		"dallas,max6646"
+		"dallas,max6647"
+		"dallas,max6649"
+		"dallas,max6657"
+		"dallas,max6658"
+		"dallas,max6659"
+		"dallas,max6680"
+		"dallas,max6681"
+		"dallas,max6695"
+		"dallas,max6696"
+		"onnn,nct1008"
+		"winbond,w83l771"
+		"nxp,sa56004"
+
+- reg: I2C bus address of the device
+
+- vcc-supply: vcc regulator for the supply voltage.
+
+Optional properties:
+- interrupts: Contains a single interrupt specifier which describes the
+              LM90 "-ALERT" pin output.
+              See interrupt-controller/interrupts.txt for the format.
+
+Example LM90 node:
+
+temp-sensor {
+	compatible = "onnn,nct1008";
+	reg = <0x4c>;
+	vcc-supply = <&palmas_ldo6_reg>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+}

Documentation/devicetree/bindings/hwrng/omap_rng.txt

@@ -0,0 +1,22 @@
+OMAP SoC HWRNG Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  RNG versions:
+  - "ti,omap2-rng" for OMAP2.
+  - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the RNG module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt number for the RNG module.
+		Only used for "ti,omap4-rng".
+
+Example:
+/* AM335x */
+rng: rng@48310000 {
+	compatible = "ti,omap4-rng";
+	ti,hwmods = "rng";
+	reg = <0x48310000 0x2000>;
+	interrupts = <111>;
+};

Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt

@@ -0,0 +1,35 @@
+Broadcom Kona Family I2C
+=========================
+
+This I2C controller is used in the following Broadcom SoCs:
+
+  BCM11130
+  BCM11140
+  BCM11351
+  BCM28145
+  BCM28155
+
+Required Properties
+-------------------
+- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: The interrupt number used by the controller
+- clocks: clock specifier for the kona i2c external clock
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Refer to clocks/clock-bindings.txt for generic clock consumer
+properties.
+
+Example:
+
+i2c@3e016000 {
+	compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
+	reg = <0x3e016000 0x80>;
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&bsc1_clk>;
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};

Documentation/devicetree/bindings/i2c/i2c-exynos5.txt

@@ -0,0 +1,44 @@
+* Samsung's High Speed I2C controller
+
+The Samsung's High Speed I2C controller is used to interface with I2C devices
+at various speeds ranging from 100khz to 3.4Mhz.
+
+Required properties:
+  - compatible: value should be.
+      -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
+  - reg: physical base address of the controller and length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+  - #address-cells: always 1 (for i2c addresses)
+  - #size-cells: always 0
+
+  - Pinctrl:
+    - pinctrl-0: Pin control group to be used for this controller.
+    - pinctrl-names: Should contain only one value - "default".
+
+Optional properties:
+  - clock-frequency: Desired operating frequency in Hz of the bus.
+    -> If not specified, the bus operates in fast-speed mode at
+       at 100khz.
+    -> If specified, the bus operates in high-speed mode only if the
+       clock-frequency is >= 1Mhz.
+
+Example:
+
+hsi2c@12ca0000 {
+	compatible = "samsung,exynos5-hsi2c";
+	reg = <0x12ca0000 0x100>;
+	interrupts = <56>;
+	clock-frequency = <100000>;
+
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+	};
+};

Documentation/devicetree/bindings/i2c/i2c-omap.txt

@@ -1,7 +1,8 @@
 I2C for OMAP platforms
 
 Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+  or "ti,omap4-i2c"
 - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
 - #address-cells = <1>;
 - #size-cells = <0>;

Documentation/devicetree/bindings/i2c/i2c-rcar.txt

@@ -0,0 +1,23 @@
+I2C for R-Car platforms
+
+Required properties:
+- compatible: Must be one of
+	"renesas,i2c-rcar"
+	"renesas,i2c-r8a7778"
+	"renesas,i2c-r8a7779"
+	"renesas,i2c-r8a7790"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: interrupt specifier.
+
+Optional properties:
+- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
+  propoerty indicates the default frequency 100 kHz.
+
+Examples :
+
+i2c0: i2c@e6500000 {
+	compatible = "renesas,i2c-rcar-h2";
+	reg = <0 0xe6500000 0 0x428>;
+	interrupts = <0 174 0x4>;
+};

Documentation/devicetree/bindings/i2c/i2c-st.txt

@@ -0,0 +1,41 @@
+ST SSC binding, for I2C mode operation
+
+Required properties :
+- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- clock-names: Must contain "ssc".
+- clocks: Must contain an entry for each name in clock-names. See the common
+  clock bindings.
+- A pinctrl state named "default" must be defined to set pins in mode of
+  operation for I2C transfer.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+  the default 100 kHz frequency will be used. As only Normal and Fast modes
+  are supported, possible values are 100000 and 400000.
+- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is
+  allowed through the deglitch circuit. In units of us.
+- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is
+  allowed through the deglitch circuit. In units of us.
+- A pinctrl state named "idle" could be defined to set pins in idle state
+  when I2C instance is not performing a transfer.
+- A pinctrl state named "sleep" could be defined to set pins in sleep state
+  when driver enters in suspend.
+
+
+
+Example :
+
+i2c0: i2c@fed40000 {
+	compatible	= "st,comms-ssc4-i2c";
+	reg		= <0xfed40000 0x110>;
+	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+	clocks		= <&CLK_S_ICN_REG_0>;
+	clock-names	= "ssc";
+	clock-frequency = <400000>;
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_i2c0_default>;
+	st,i2c-min-scl-pulse-width-us = <0>;
+	st,i2c-min-sda-pulse-width-us = <5>;
+};

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -15,6 +15,7 @@ adi,adt7461		+/-1C TDM Extended Temp Range I.C
 adt7461			+/-1C TDM Extended Temp Range I.C
 at,24c08		i2c serial eeprom  (24cxx)
 atmel,24c02		i2c serial eeprom  (24cxx)
+atmel,at97sc3204t	i2c trusted platform module (TPM)
 catalyst,24c32		i2c serial eeprom
 dallas,ds1307		64 x 8, Serial, I2C Real-Time Clock
 dallas,ds1338		I2C RTC with 56-Byte NV RAM
@@ -35,6 +36,7 @@ fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
 fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
 fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
+gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
@@ -44,6 +46,7 @@ mc,rv3029c2		Real Time Clock Module with I2C-Bus
 national,lm75		I2C TEMP SENSOR
 national,lm80		Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
 national,lm92		±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
+nuvoton,npct501		i2c trusted platform module (TPM)
 nxp,pca9556		Octal SMBus and I2C registered interface
 nxp,pca9557		8-bit I2C-bus and SMBus I/O port with reset
 nxp,pcf8563		Real-time clock/calendar
@@ -61,3 +64,4 @@ taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
 ti,tmp275		Digital Temperature Sensor
+winbond,wpct301		i2c trusted platform module (TPM)

Documentation/devicetree/bindings/iio/light/cm36651.txt

@@ -0,0 +1,26 @@
+* Capella CM36651 I2C Proximity and Color Light sensor
+
+Required properties:
+- compatible: must be "capella,cm36651"
+- reg: the I2C address of the device
+- interrupts: interrupt-specifier for the sole interrupt
+	      generated by the device
+- vled-supply: regulator for the IR LED. IR_LED is a part
+	      of the cm36651 for proximity detection.
+	      As covered in ../../regulator/regulator.txt
+
+Example:
+
+	i2c_cm36651: i2c-gpio {
+		/* ... */
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 0>;
+			vled-supply = <&ps_als_reg>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt

@@ -0,0 +1,21 @@
+* Sharp GP2AP020A00F I2C Proximity/ALS sensor
+
+The proximity detector sensor requires power supply
+for its built-in led. It is also defined by this binding.
+
+Required properties:
+
+  - compatible : should be "sharp,gp2ap020a00f"
+  - reg : the I2C slave address of the light sensor
+  - interrupts : interrupt specifier for the sole interrupt generated
+		 by the device
+  - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt
+
+Example:
+
+gp2ap020a00f@39 {
+	compatible = "sharp,gp2ap020a00f";
+	reg = <0x39>;
+	interrupts = <2 0>;
+	vled-supply = <...>;
+};

Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt

@@ -6,7 +6,7 @@ Required properties:
 	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
 		  support on the platform.
 	ti,x-plate-resistance: X plate resistance
-	ti,coordiante-readouts: The sequencer supports a total of 16
+	ti,coordinate-readouts: The sequencer supports a total of 16
 				programmable steps each step is used to
 				read a single coordinate. A single
                                 readout is enough but multiple reads can

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt

@@ -8,9 +8,6 @@ Required properties:
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source. The value shall be 1.
 
-For the valid interrupt sources for your SoC, see the documentation in
-sunxi/<soc>.txt
-
 Example:
 
 intc: interrupt-controller {

Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -4,16 +4,33 @@ Specifying interrupt information for devices
 1) Interrupt client nodes
 -------------------------
 
-Nodes that describe devices which generate interrupts must contain an
-"interrupts" property. This property must contain a list of interrupt
-specifiers, one per output interrupt. The format of the interrupt specifier is
-determined by the interrupt controller to which the interrupts are routed; see
-section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an either an
+"interrupts" property or an "interrupts-extended" property. These properties
+contain a list of interrupt specifiers, one per output interrupt. The format of
+the interrupt specifier is determined by the interrupt controller to which the
+interrupts are routed; see section 2 below for details.
+
+  Example:
+	interrupt-parent = <&intc1>;
+	interrupts = <5 0>, <6 0>;
 
 The "interrupt-parent" property is used to specify the controller to which
 interrupts are routed and contains a single phandle referring to the interrupt
 controller node. This property is inherited, so it may be specified in an
-interrupt client node or in any of its parent nodes.
+interrupt client node or in any of its parent nodes. Interrupts listed in the
+"interrupts" property are always in reference to the node's interrupt parent.
+
+The "interrupts-extended" property is a special form for use when a node needs
+to reference multiple interrupt parents. Each entry in this property contains
+both the parent phandle and the interrupt specifier. "interrupts-extended"
+should only be used when a device has multiple interrupt parents.
+
+  Example:
+	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
+
+A device node may contain either "interrupts" or "interrupts-extended", but not
+both. If both properties are present, then the operating system should log an
+error and use only the data in "interrupts".
 
 2) Interrupt controller nodes
 -----------------------------

Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt

@@ -1,89 +0,0 @@
-Allwinner A10 (sun4i) interrupt sources
----------------------------------------
-
-The interrupt sources available for the Allwinner A10 SoC are the
-following one:
-
-0: ENMI
-1: UART0
-2: UART1
-3: UART2
-4: UART3
-5: IR0
-6: IR1
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-13: SPDIF
-14: AC97
-15: TS
-16: I2S
-17: UART4
-18: UART5
-19: UART6
-20: UART7
-21: KEYPAD
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-26: CAN
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: MMC0
-33: MMC1
-34: MMC2
-35: MMC3
-36: MEMSTICK
-37: NAND
-38: USB0
-39: USB1
-40: USB2
-41: SCR
-42: CSI0
-43: CSI1
-44: LCDCTRL0
-45: LCDCTRL1
-46: MP
-47: DEFEBE0
-48: DEFEBE1
-49: PMU
-50: SPI3
-51: TZASC
-52: PATA
-53: VE
-54: SS
-55: EMAC
-56: SATA
-57: GPS
-58: HDMI
-59: TVE
-60: ACE
-61: TVD
-62: PS2_0
-63: PS2_1
-64: USB3
-65: USB4
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1

Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt

@@ -1,55 +0,0 @@
-Allwinner A13 (sun5i) interrupt sources
----------------------------------------
-
-The interrupt sources available for the Allwinner A13 SoC are the
-following one:
-
-0: ENMI
-2: UART1
-4: UART3
-5: IR
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: MMC0
-33: MMC1
-34: MMC2
-37: NAND
-38: USB OTG
-39: USB EHCI
-40: USB OHCI
-42: CSI
-44: LCDCTRL
-47: DEFEBE
-49: PMU
-53: VE
-54: SS
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1