Merge tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
  changes over lots of "minor" driver subsystems, the largest being some
  new FPGA drivers. Other than that, a few other new drivers, but no new
  driver subsystems added for this kernel cycle, a nice change.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
  uio-hv-generic: store physical addresses instead of virtual
  Tools: hv: kvp: configurable external scripts path
  uio-hv-generic: new userspace i/o driver for VMBus
  vmbus: add support for dynamic device id's
  hv: change clockevents unbind tactics
  hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
  hyperv: Fix spelling of HV_UNKOWN
  mei: bus: enable non-blocking RX
  mei: fix the back to back interrupt handling
  mei: synchronize irq before initiating a reset.
  VME: Remove shutdown entry from vme_driver
  auxdisplay: ht16k33: select framebuffer helper modules
  MAINTAINERS: add git url for fpga
  fpga: Clarify how write_init works streaming modes
  fpga zynq: Fix incorrect ISR state on bootup
  fpga zynq: Remove priv->dev
  fpga zynq: Add missing \n to messages
  fpga: Add COMPILE_TEST to all drivers
  uio: pruss: add clk_disable()
  char/pcmcia: add some error checking in scr24x_read()
  ...

Documentation/ABI/testing/sysfs-class-fpga-bridge

@@ -0,0 +1,11 @@
+What:		/sys/class/fpga_bridge/<bridge>/name
+Date:		January 2016
+KernelVersion:	4.5
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Name of low level FPGA bridge driver.
+
+What:		/sys/class/fpga_bridge/<bridge>/state
+Date:		January 2016
+KernelVersion:	4.5
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Show bridge state as "enabled" or "disabled"

Documentation/ABI/testing/sysfs-class-mei

@@ -29,3 +29,19 @@ Description:	Display fw status registers content
 		Also number of registers varies between 1 and 6
 		depending on generation.
 
+What:		/sys/class/mei/meiN/hbm_ver
+Date:		Aug 2016
+KernelVersion:	4.9
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display the negotiated HBM protocol version.
+
+		The HBM protocol version negotiated
+		between the driver and the device.
+
+What:		/sys/class/mei/meiN/hbm_ver_drv
+Date:		Aug 2016
+KernelVersion:	4.9
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display the driver HBM protocol version.
+
+		The HBM protocol version supported by the driver.

Documentation/devicetree/bindings/display/ht16k33.txt

@@ -0,0 +1,42 @@
+Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan
+-------------------------------------------------------------------------------
+
+Required properties:
+- compatible:		"holtek,ht16k33"
+- reg:			I2C slave address of the chip.
+- interrupt-parent:	A phandle pointing to the interrupt controller
+			serving the interrupt for this chip.
+- interrupts:		Interrupt specification for the key pressed interrupt.
+- refresh-rate-hz:	Display update interval in HZ.
+- debounce-delay-ms:	Debouncing interval time in milliseconds.
+- linux,keymap: 	The keymap for keys as described in the binding
+			document (devicetree/bindings/input/matrix-keymap.txt).
+
+Optional properties:
+- linux,no-autorepeat:	Disable keyrepeat.
+- default-brightness-level: Initial brightness level [0-15] (default: 15).
+
+Example:
+
+&i2c1 {
+	ht16k33: ht16k33@70 {
+		compatible = "holtek,ht16k33";
+		reg = <0x70>;
+		refresh-rate-hz = <20>;
+		debounce-delay-ms = <50>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		linux,keymap = <
+			MATRIX_KEY(2, 0, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F8)
+			MATRIX_KEY(4, 0, KEY_F10)
+			MATRIX_KEY(5, 0, KEY_F4)
+			MATRIX_KEY(6, 0, KEY_F2)
+			MATRIX_KEY(2, 1, KEY_F5)
+			MATRIX_KEY(3, 1, KEY_F7)
+			MATRIX_KEY(4, 1, KEY_F9)
+			MATRIX_KEY(5, 1, KEY_F3)
+			MATRIX_KEY(6, 1, KEY_F1)
+		>;
+	};
+};

Documentation/devicetree/bindings/fpga/fpga-region.txt

@@ -0,0 +1,494 @@
+FPGA Region Device Tree Binding
+
+Alan Tull 2016
+
+ CONTENTS
+ - Introduction
+ - Terminology
+ - Sequence
+ - FPGA Region
+ - Supported Use Models
+ - Device Tree Examples
+ - Constraints
+
+
+Introduction
+============
+
+FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
+the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
+control.
+
+This device tree binding document hits some of the high points of FPGA usage and
+attempts to include terminology used by both major FPGA manufacturers.  This
+document isn't a replacement for any manufacturers specifications for FPGA
+usage.
+
+
+Terminology
+===========
+
+Full Reconfiguration
+ * The entire FPGA is programmed.
+
+Partial Reconfiguration (PR)
+ * A section of an FPGA is reprogrammed while the rest of the FPGA is not
+   affected.
+ * Not all FPGA's support PR.
+
+Partial Reconfiguration Region (PRR)
+ * Also called a "reconfigurable partition"
+ * A PRR is a specific section of a FPGA reserved for reconfiguration.
+ * A base (or static) FPGA image may create a set of PRR's that later may
+   be independently reprogrammed many times.
+ * The size and specific location of each PRR is fixed.
+ * The connections at the edge of each PRR are fixed.  The image that is loaded
+   into a PRR must fit and must use a subset of the region's connections.
+ * The busses within the FPGA are split such that each region gets its own
+   branch that may be gated independently.
+
+Persona
+ * Also called a "partial bit stream"
+ * An FPGA image that is designed to be loaded into a PRR.  There may be
+   any number of personas designed to fit into a PRR, but only one at at time
+   may be loaded.
+ * A persona may create more regions.
+
+FPGA Bridge
+ * FPGA Bridges gate bus signals between a host and FPGA.
+ * FPGA Bridges should be disabled while the FPGA is being programmed to
+   prevent spurious signals on the cpu bus and to the soft logic.
+ * FPGA bridges may be actual hardware or soft logic on an FPGA.
+ * During Full Reconfiguration, hardware bridges between the host and FPGA
+   will be disabled.
+ * During Partial Reconfiguration of a specific region, that region's bridge
+   will be used to gate the busses.  Traffic to other regions is not affected.
+ * In some implementations, the FPGA Manager transparantly handles gating the
+   buses, eliminating the need to show the hardware FPGA bridges in the
+   device tree.
+ * An FPGA image may create a set of reprogrammable regions, each having its
+   own bridge and its own split of the busses in the FPGA.
+
+FPGA Manager
+ * An FPGA Manager is a hardware block that programs an FPGA under the control
+   of a host processor.
+
+Base Image
+ * Also called the "static image"
+ * An FPGA image that is designed to do full reconfiguration of the FPGA.
+ * A base image may set up a set of partial reconfiguration regions that may
+   later be reprogrammed.
+
+    ----------------       ----------------------------------
+    |  Host CPU    |       |             FPGA               |
+    |              |       |                                |
+    |          ----|       |       -----------    --------  |
+    |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
+    |          | W |       |   |   -----------    --------  |
+    |          |   |       |   |                            |
+    |          | B |<=====>|<==|   -----------    --------  |
+    |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
+    |          | I |       |   |   -----------    --------  |
+    |          | D |       |   |                            |
+    |          | G |       |   |   -----------    --------  |
+    |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
+    |          ----|       |       -----------    --------  |
+    |              |       |                                |
+    ----------------       ----------------------------------
+
+Figure 1: An FPGA set up with a base image that created three regions.  Each
+region (PRR0-2) gets its own split of the busses that is independently gated by
+a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
+reprogrammed independently while the rest of the system continues to function.
+
+
+Sequence
+========
+
+When a DT overlay that targets a FPGA Region is applied, the FPGA Region will
+do the following:
+
+ 1. Disable appropriate FPGA bridges.
+ 2. Program the FPGA using the FPGA manager.
+ 3. Enable the FPGA bridges.
+ 4. The Device Tree overlay is accepted into the live tree.
+ 5. Child devices are populated.
+
+When the overlay is removed, the child nodes will be removed and the FPGA Region
+will disable the bridges.
+
+
+FPGA Region
+===========
+
+FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
+Region brings together the elements needed to program on a running system and
+add the child devices:
+
+ * FPGA Manager
+ * FPGA Bridges
+ * image-specific information needed to to the programming.
+ * child nodes
+
+The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
+FPGA while an operating system is running.
+
+An FPGA Region that exists in the live Device Tree reflects the current state.
+If the live tree shows a "firmware-name" property or child nodes under a FPGA
+Region, the FPGA already has been programmed.  A DTO that targets a FPGA Region
+and adds the "firmware-name" property is taken as a request to reprogram the
+FPGA.  After reprogramming is successful, the overlay is accepted into the live
+tree.
+
+The base FPGA Region in the device tree represents the FPGA and supports full
+reconfiguration.  It must include a phandle to an FPGA Manager.  The base
+FPGA region will be the child of one of the hardware bridges (the bridge that
+allows register access) between the cpu and the FPGA.  If there are more than
+one bridge to control during FPGA programming, the region will also contain a
+list of phandles to the additional hardware FPGA Bridges.
+
+For partial reconfiguration (PR), each PR region will have an FPGA Region.
+These FPGA regions are children of FPGA bridges which are then children of the
+base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
+this.
+
+If an FPGA Region does not specify a FPGA Manager, it will inherit the FPGA
+Manager specified by its ancestor FPGA Region.  This supports both the case
+where the same FPGA Manager is used for all of a FPGA as well the case where
+a different FPGA Manager is used for each region.
+
+FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
+shutting down bridges that are upstream from the other active regions while one
+region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
+hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
+within the static image of the FPGA.
+
+Required properties:
+- compatible : should contain "fpga-region"
+- fpga-mgr : should contain a phandle to an FPGA Manager.  Child FPGA Regions
+	inherit this property from their ancestor regions.  A fpga-mgr property
+	in a region will override any inherited FPGA manager.
+- #address-cells, #size-cells, ranges : must be present to handle address space
+	mapping for child nodes.
+
+Optional properties:
+- firmware-name : should contain the name of an FPGA image file located on the
+	firmware search path.  If this property shows up in a live device tree
+	it indicates that the FPGA has already been programmed with this image.
+	If this property is in an overlay targeting a FPGA region, it is a
+	request to program the FPGA with that image.
+- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
+	controlled during FPGA programming along with the parent FPGA bridge.
+	This property is optional if the FPGA Manager handles the bridges.
+        If the fpga-region is  the child of a fpga-bridge, the list should not
+        contain the parent bridge.
+- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
+	otherwise full reconfiguration is done.
+- external-fpga-config : boolean, set if the FPGA has already been configured
+	prior to OS boot up.
+- region-unfreeze-timeout-us : The maximum time in microseconds to wait for
+	bridges to successfully become enabled after the region has been
+	programmed.
+- region-freeze-timeout-us : The maximum time in microseconds to wait for
+	bridges to successfully become disabled before the region has been
+	programmed.
+- child nodes : devices in the FPGA after programming.
+
+In the example below, when an overlay is applied targeting fpga-region0,
+fpga_mgr is used to program the FPGA.  Two bridges are controlled during
+programming: the parent fpga_bridge0 and fpga_bridge1.  Because the region is
+the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the
+fpga-bridges property.  During programming, these bridges are disabled, the
+firmware specified in the overlay is loaded to the FPGA using the FPGA manager
+specified in the region.  If FPGA programming succeeds, the bridges are
+reenabled and the overlay makes it into the live device tree.  The child devices
+are then populated.  If FPGA programming fails, the bridges are left disabled
+and the overlay is rejected.  The overlay's ranges property maps the lwhps
+bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by
+the two child devices.
+
+Example:
+Base tree contains:
+
+	fpga_mgr: fpga-mgr@ff706000 {
+		compatible = "altr,socfpga-fpga-mgr";
+		reg = <0xff706000 0x1000
+		       0xffb90000 0x20>;
+		interrupts = <0 175 4>;
+	};
+
+	fpga_bridge0: fpga-bridge@ff400000 {
+		compatible = "altr,socfpga-lwhps2fpga-bridge";
+		reg = <0xff400000 0x100000>;
+		resets = <&rst LWHPS2FPGA_RESET>;
+		clocks = <&l4_main_clk>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fpga_region0: fpga-region0 {
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+	};
+
+	fpga_bridge1: fpga-bridge@ff500000 {
+		compatible = "altr,socfpga-hps2fpga-bridge";
+		reg = <0xff500000 0x10000>;
+		resets = <&rst HPS2FPGA_RESET>;
+		clocks = <&l4_main_clk>;
+	};
+
+Overlay contains:
+
+/dts-v1/ /plugin/;
+/ {
+	fragment@0 {
+		target = <&fpga_region0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			firmware-name = "soc_system.rbf";
+			fpga-bridges = <&fpga_bridge1>;
+			ranges = <0x20000 0xff200000 0x100000>,
+				 <0x0 0xc0000000 0x20000000>;
+
+			gpio@10040 {
+				compatible = "altr,pio-1.0";
+				reg = <0x10040 0x20>;
+				altr,gpio-bank-width = <4>;
+				#gpio-cells = <2>;
+				clocks = <2>;
+				gpio-controller;
+			};
+
+			onchip-memory {
+				device_type = "memory";
+				compatible = "altr,onchipmem-15.1";
+				reg = <0x0 0x10000>;
+			};
+		};
+	};
+};
+
+
+Supported Use Models
+====================
+
+In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
+a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
+uses are specific to a FPGA device.
+
+ * No FPGA Bridges
+   In this case, the FPGA Manager which programs the FPGA also handles the
+   bridges behind the scenes.  No FPGA Bridge devices are needed for full
+   reconfiguration.
+
+ * Full reconfiguration with hardware bridges
+   In this case, there are hardware bridges between the processor and FPGA that
+   need to be controlled during full reconfiguration.  Before the overlay is
+   applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
+   FPGA Region.  The FPGA Region is the child of the bridge that allows
+   register access to the FPGA.  Additional bridges may be listed in a
+   fpga-bridges property in the FPGA region or in the device tree overlay.
+
+ * Partial reconfiguration with bridges in the FPGA
+   In this case, the FPGA will have one or more PRR's that may be programmed
+   separately while the rest of the FPGA can remain active.  To manage this,
+   bridges need to exist in the FPGA that can gate the buses going to each FPGA
+   region while the buses are enabled for other sections.  Before any partial
+   reconfiguration can be done, a base FPGA image must be loaded which includes
+   PRR's with FPGA bridges.  The device tree should have a FPGA region for each
+   PRR.
+
+Device Tree Examples
+====================
+
+The intention of this section is to give some simple examples, focusing on
+the placement of the elements detailed above, especially:
+ * FPGA Manager
+ * FPGA Bridges
+ * FPGA Region
+ * ranges
+ * target-path or target
+
+For the purposes of this section, I'm dividing the Device Tree into two parts,
+each with its own requirements.  The two parts are:
+ * The live DT prior to the overlay being added
+ * The DT overlay
+
+The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA
+Bridges.  The FPGA Region's "fpga-mgr" property specifies the manager by phandle
+to handle programming the FPGA.  If the FPGA Region is the child of another FPGA
+Region, the parent's FPGA Manager is used.  If FPGA Bridges need to be involved,
+they are specified in the FPGA Region by the "fpga-bridges" property.  During
+FPGA programming, the FPGA Region will disable the bridges that are in its
+"fpga-bridges" list and will re-enable them after FPGA programming has
+succeeded.
+
+The Device Tree Overlay will contain:
+ * "target-path" or "target"
+   The insertion point where the the contents of the overlay will go into the
+   live tree.  target-path is a full path, while target is a phandle.
+ * "ranges"
+    The address space mapping from processor to FPGA bus(ses).
+ * "firmware-name"
+   Specifies the name of the FPGA image file on the firmware search
+   path.  The search path is described in the firmware class documentation.
+ * "partial-fpga-config"
+   This binding is a boolean and should be present if partial reconfiguration
+   is to be done.
+ * child nodes corresponding to hardware that will be loaded in this region of
+   the FPGA.
+
+Device Tree Example: Full Reconfiguration without Bridges
+=========================================================
+
+Live Device Tree contains:
+	fpga_mgr0: fpga-mgr@f8007000 {
+		compatible = "xlnx,zynq-devcfg-1.0";
+		reg = <0xf8007000 0x100>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 8 4>;
+		clocks = <&clkc 12>;
+		clock-names = "ref_clk";
+		syscon = <&slcr>;
+	};
+
+	fpga_region0: fpga-region0 {
+		compatible = "fpga-region";
+		fpga-mgr = <&fpga_mgr0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+	};
+
+DT Overlay contains:
+/dts-v1/ /plugin/;
+/ {
+fragment@0 {
+	target = <&fpga_region0>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	__overlay__ {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		firmware-name = "zynq-gpio.bin";
+
+		gpio1: gpio@40000000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = <0x40000000 0x10000>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			xlnx,gpio-width= <0x6>;
+		};
+	};
+};
+
+Device Tree Example: Full Reconfiguration to add PRR's
+======================================================
+
+The base FPGA Region is specified similar to the first example above.
+
+This example programs the FPGA to have two regions that can later be partially
+configured.  Each region has its own bridge in the FPGA fabric.
+
+DT Overlay contains:
+/dts-v1/ /plugin/;
+/ {
+	fragment@0 {
+		target = <&fpga_region0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			firmware-name = "base.rbf";
+
+			fpga-bridge@4400 {
+				compatible = "altr,freeze-bridge";
+				reg = <0x4400 0x10>;
+
+				fpga_region1: fpga-region1 {
+					compatible = "fpga-region";
+					#address-cells = <0x1>;
+					#size-cells = <0x1>;
+					ranges;
+				};
+			};
+
+			fpga-bridge@4420 {
+				compatible = "altr,freeze-bridge";
+				reg = <0x4420 0x10>;
+
+				fpga_region2: fpga-region2 {
+					compatible = "fpga-region";
+					#address-cells = <0x1>;
+					#size-cells = <0x1>;
+					ranges;
+				};
+			};
+		};
+	};
+};
+
+Device Tree Example: Partial Reconfiguration
+============================================
+
+This example reprograms one of the PRR's set up in the previous example.
+
+The sequence that occurs when this overlay is similar to the above, the only
+differences are that the FPGA is partially reconfigured due to the
+"partial-fpga-config" boolean and the only bridge that is controlled during
+programming is the FPGA based bridge of fpga_region1.
+
+/dts-v1/ /plugin/;
+/ {
+	fragment@0 {
+		target = <&fpga_region1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			firmware-name = "soc_image2.rbf";
+			partial-fpga-config;
+
+			gpio@10040 {
+				compatible = "altr,pio-1.0";
+				reg = <0x10040 0x20>;
+				clocks = <0x2>;
+				altr,gpio-bank-width = <0x4>;
+				resetvalue = <0x0>;
+				#gpio-cells = <0x2>;
+				gpio-controller;
+			};
+		};
+	};
+};
+
+Constraints
+===========
+
+It is beyond the scope of this document to fully describe all the FPGA design
+constraints required to make partial reconfiguration work[1] [2] [3], but a few
+deserve quick mention.
+
+A persona must have boundary connections that line up with those of the partion
+or region it is designed to go into.
+
+During programming, transactions through those connections must be stopped and
+the connections must be held at a fixed logic level.  This can be achieved by
+FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
+
+--
+[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
+[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
+[3] http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf

Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt

@@ -0,0 +1,17 @@
+Broadcom OTP memory controller
+
+Required Properties:
+- compatible: "brcm,ocotp" for the first generation Broadcom OTPC which is used
+  in Cygnus and supports 32 bit read/write. Use "brcm,ocotp-v2" for the second
+  generation Broadcom OTPC which is used in SoC's such as Stingray and supports
+  64-bit read/write.
+- reg: Base address of the OTP controller.
+- brcm,ocotp-size: Amount of memory available, in 32 bit words
+
+Example:
+
+otp: otp@0301c800 {
+	compatible = "brcm,ocotp";
+	reg = <0x0301c800 0x2c>;
+	brcm,ocotp-size = <2048>;
+};

Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt

@@ -0,0 +1,20 @@
+* NXP LPC18xx OTP memory
+
+Internal OTP (One Time Programmable) memory for NXP LPC18xx/43xx devices.
+
+Required properties:
+  - compatible: Should be "nxp,lpc1850-otp"
+  - reg: Must contain an entry with the physical base address and length
+    for each entry in reg-names.
+  - address-cells: must be set to 1.
+  - size-cells: must be set to 1.
+
+See nvmem.txt for more information.
+
+Example:
+  otp: otp@40045000 {
+    compatible = "nxp,lpc1850-otp";
+    reg = <0x40045000 0x1000>;
+    #address-cells = <1>;
+    #size-cells = <1>;
+  };

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -127,6 +127,7 @@ hitex	Hitex Development Tools
 holt	Holt Integrated Circuits, Inc.
 honeywell	Honeywell
 hp	Hewlett Packard
+holtek	Holtek Semiconductor, Inc.
 i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.

Documentation/fpga/fpga-mgr.txt

@@ -18,31 +18,37 @@ API Functions:
 To program the FPGA from a file or from a buffer:
 -------------------------------------------------
 
-	int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags,
+	int fpga_mgr_buf_load(struct fpga_manager *mgr,
+			      struct fpga_image_info *info,
 		              const char *buf, size_t count);
 
 Load the FPGA from an image which exists as a buffer in memory.
 
-	int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+	int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+				   struct fpga_image_info *info,
 		                   const char *image_name);
 
 Load the FPGA from an image which exists as a file.  The image file must be on
-the firmware search path (see the firmware class documentation).
-
-For both these functions, flags == 0 for normal full reconfiguration or
-FPGA_MGR_PARTIAL_RECONFIG for partial reconfiguration.  If successful, the FPGA
-ends up in operating mode.  Return 0 on success or a negative error code.
+the firmware search path (see the firmware class documentation).  If successful,
+the FPGA ends up in operating mode.  Return 0 on success or a negative error
+code.
 
+A FPGA design contained in a FPGA image file will likely have particulars that
+affect how the image is programmed to the FPGA.  These are contained in struct
+fpga_image_info.  Currently the only such particular is a single flag bit
+indicating whether the image is for full or partial reconfiguration.
 
 To get/put a reference to a FPGA manager:
 -----------------------------------------
 
 	struct fpga_manager *of_fpga_mgr_get(struct device_node *node);
+	struct fpga_manager *fpga_mgr_get(struct device *dev);
+
+Given a DT node or device, get an exclusive reference to a FPGA manager.
 
 	void fpga_mgr_put(struct fpga_manager *mgr);
 
-Given a DT node, get an exclusive reference to a FPGA manager or release
-the reference.
+Release the reference.
 
 
 To register or unregister the low level FPGA-specific driver:
@@ -70,8 +76,11 @@ struct device_node *mgr_node = ...
 char *buf = ...
 int count = ...
 
+/* struct with information about the FPGA image to program. */
+struct fpga_image_info info;
+
 /* flags indicates whether to do full or partial reconfiguration */
-int flags = 0;
+info.flags = 0;
 
 int ret;
 
@@ -79,7 +88,7 @@ int ret;
 struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node);
 
 /* Load the buffer to the FPGA */
-ret = fpga_mgr_buf_load(mgr, flags, buf, count);
+ret = fpga_mgr_buf_load(mgr, &info, buf, count);
 
 /* Release the FPGA manager */
 fpga_mgr_put(mgr);
@@ -96,8 +105,11 @@ struct device_node *mgr_node = ...
 /* FPGA image is in this file which is in the firmware search path */
 const char *path = "fpga-image-9.rbf"
 
+/* struct with information about the FPGA image to program. */
+struct fpga_image_info info;
+
 /* flags indicates whether to do full or partial reconfiguration */
-int flags = 0;
+info.flags = 0;
 
 int ret;
 
@@ -105,7 +117,7 @@ int ret;
 struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node);
 
 /* Get the firmware image (path) and load it to the FPGA */
-ret = fpga_mgr_firmware_load(mgr, flags, path);
+ret = fpga_mgr_firmware_load(mgr, &info, path);
 
 /* Release the FPGA manager */
 fpga_mgr_put(mgr);
@@ -157,7 +169,10 @@ The programming sequence is:
  2. .write (may be called once or multiple times)
  3. .write_complete
 
-The .write_init function will prepare the FPGA to receive the image data.
+The .write_init function will prepare the FPGA to receive the image data.  The
+buffer passed into .write_init will be atmost .initial_header_size bytes long,
+if the whole bitstream is not immediately available then the core code will
+buffer up at least this much before starting.
 
 The .write function writes a buffer to the FPGA. The buffer may be contain the
 whole FPGA image or may be a smaller chunk of an FPGA image.  In the latter

Documentation/trace/intel_th.txt

@@ -97,3 +97,25 @@ $ echo 0 > /sys/bus/intel_th/devices/0-msc0/active
 # and now you can collect the trace from the device node:
 
 $ cat /dev/intel_th0/msc0 > my_stp_trace
+
+Host Debugger Mode
+==================
+
+It is possible to configure the Trace Hub and control its trace
+capture from a remote debug host, which should be connected via one of
+the hardware debugging interfaces, which will then be used to both
+control Intel Trace Hub and transfer its trace data to the debug host.
+
+The driver needs to be told that such an arrangement is taking place
+so that it does not touch any capture/port configuration and avoids
+conflicting with the debug host's configuration accesses. The only
+activity that the driver will perform in this mode is collecting
+software traces to the Software Trace Hub (an stm class device). The
+user is still responsible for setting up adequate master/channel
+mappings that the decoder on the receiving end would recognize.
+
+In order to enable the host mode, set the 'host_mode' parameter of the
+'intel_th' kernel module to 'y'. None of the virtual output devices
+will show up on the intel_th bus. Also, trace configuration and
+capture controlling attribute groups of the 'gth' device will not be
+exposed. The 'sth' device will operate as usual.

Documentation/trace/stm.txt

@@ -69,12 +69,43 @@ stm device's channel mmio region is 64 bytes and hardware page size is
 width==64, you should be able to mmap() one page on this file
 descriptor and obtain direct access to an mmio region for 64 channels.
 
+Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
+[2].
+
+stm_source
+==========
+
 For kernel-based trace sources, there is "stm_source" device
 class. Devices of this class can be connected and disconnected to/from
-stm devices at runtime via a sysfs attribute.
+stm devices at runtime via a sysfs attribute called "stm_source_link"
+by writing the name of the desired stm device there, for example:
 
-Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
-[2].
+$ echo dummy_stm.0 > /sys/class/stm_source/console/stm_source_link
+
+For examples on how to use stm_source interface in the kernel, refer
+to stm_console or stm_heartbeat drivers.
+
+Each stm_source device will need to assume a master and a range of
+channels, depending on how many channels it requires. These are
+allocated for the device according to the policy configuration. If
+there's a node in the root of the policy directory that matches the
+stm_source device's name (for example, "console"), this node will be
+used to allocate master and channel numbers. If there's no such policy
+node, the stm core will pick the first contiguous chunk of channels
+within the first available master. Note that the node must exist
+before the stm_source device is connected to its stm device.
+
+stm_console
+===========
+
+One implementation of this interface also used in the example above is
+the "stm_console" driver, which basically provides a one-way console
+for kernel messages over an stm device.
+
+To configure the master/channel pair that will be assigned to this
+console in the STP stream, create a "console" policy entry (see the
+beginning of this text on how to do that). When initialized, it will
+consume one channel.
 
 [1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
 [2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html

MAINTAINERS

@@ -3067,6 +3067,12 @@ F:	drivers/usb/host/whci/
 F:	drivers/usb/wusbcore/
 F:	include/linux/usb/wusb*
 
+HT16K33 LED CONTROLLER DRIVER
+M:	Robin van der Gracht <robin@protonic.nl>
+S:	Maintained
+F:	drivers/auxdisplay/ht16k33.c
+F:	Documentation/devicetree/bindings/display/ht16k33.txt
+
 CFAG12864B LCD DRIVER
 M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
@@ -5043,7 +5049,9 @@ K:	fmc_d.*register
 FPGA MANAGER FRAMEWORK
 M:	Alan Tull <atull@opensource.altera.com>
 R:	Moritz Fischer <moritz.fischer@ettus.com>
+L:	linux-fpga@vger.kernel.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
 F:	drivers/fpga/
 F:	include/linux/fpga/fpga-mgr.h
 W:	http://www.rocketboards.org
@@ -5940,6 +5948,7 @@ F:	drivers/input/serio/hyperv-keyboard.c
 F:	drivers/pci/host/pci-hyperv.c
 F:	drivers/net/hyperv/
 F:	drivers/scsi/storvsc_drv.c
+F:	drivers/uio/uio_hv_generic.c
 F:	drivers/video/fbdev/hyperv_fb.c
 F:	include/linux/hyperv.h
 F:	tools/hv/
@@ -9231,7 +9240,7 @@ F:      drivers/misc/panel.c
 
 PARALLEL PORT SUBSYSTEM
 M:	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
-M:	Sudip Mukherjee <sudip@vectorindia.org>
+M:	Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
 L:	linux-parport@lists.infradead.org (subscribers-only)
 S:	Maintained
 F:	drivers/parport/
@@ -10841,6 +10850,11 @@ W:	http://www.sunplus.com
 S:	Supported
 F:	arch/score/
 
+SCR24X CHIP CARD INTERFACE DRIVER
+M:	Lubomir Rintel <lkundrak@v3.sk>
+S:	Supported
+F:	drivers/char/pcmcia/scr24x_cs.c
+
 SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
 M:	Sudeep Holla <sudeep.holla@arm.com>
 L:	linux-arm-kernel@lists.infradead.org
@@ -11244,7 +11258,7 @@ F:	include/media/i2c/ov2659.h
 SILICON MOTION SM712 FRAME BUFFER DRIVER
 M:	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
 M:	Teddy Wang <teddy.wang@siliconmotion.com>
-M:	Sudip Mukherjee <sudip@vectorindia.org>
+M:	Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/sm712*
@@ -11672,7 +11686,7 @@ F:	drivers/staging/rtl8712/
 STAGING - SILICON MOTION SM750 FRAME BUFFER DRIVER
 M:	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
 M:	Teddy Wang <teddy.wang@siliconmotion.com>
-M:	Sudip Mukherjee <sudip@vectorindia.org>
+M:	Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/staging/sm750fb/

arch/blackfin/mach-bf561/coreb.c

@@ -1,4 +1,6 @@
 /* Load firmware into Core B on a BF561
+ *
+ * Author: Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
  *
  * Copyright 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
@@ -14,9 +16,9 @@
 
 #include <linux/device.h>
 #include <linux/fs.h>
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
-#include <linux/module.h>
 
 #define CMD_COREB_START		_IO('b', 0)
 #define CMD_COREB_STOP		_IO('b', 1)
@@ -59,8 +61,4 @@ static struct miscdevice coreb_dev = {
 	.name  = "coreb",
 	.fops  = &coreb_fops,
 };
-module_misc_device(coreb_dev);
-
-MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
-MODULE_DESCRIPTION("BF561 Core B Support");
-MODULE_LICENSE("GPL");
+builtin_misc_device(coreb_dev);

drivers/auxdisplay/Kconfig

@@ -128,4 +128,17 @@ config IMG_ASCII_LCD
 	  development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
 	  from Imagination Technologies.
 
+config HT16K33
+	tristate "Holtek Ht16K33 LED controller with keyscan"
+	depends on FB && OF && I2C && INPUT
+	select FB_SYS_FOPS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select INPUT_MATRIXKMAP
+	select FB_BACKLIGHT
+	help
+	  Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
+	  LED controller driver with keyscan.
+
 endif # AUXDISPLAY

drivers/auxdisplay/Makefile

@@ -5,3 +5,4 @@
 obj-$(CONFIG_KS0108)		+= ks0108.o
 obj-$(CONFIG_CFAG12864B)	+= cfag12864b.o cfag12864bfb.o
 obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
+obj-$(CONFIG_HT16K33)		+= ht16k33.o

drivers/auxdisplay/ht16k33.c

@@ -0,0 +1,563 @@
+/*
+ * HT16K33 driver
+ *
+ * Author: Robin van der Gracht <robin@protonic.nl>
+ *
+ * Copyright: (C) 2016 Protonic Holland.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/fb.h>
+#include <linux/slab.h>
+#include <linux/backlight.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/workqueue.h>
+#include <linux/mm.h>
+
+/* Registers */
+#define REG_SYSTEM_SETUP		0x20
+#define REG_SYSTEM_SETUP_OSC_ON		BIT(0)
+
+#define REG_DISPLAY_SETUP		0x80
+#define REG_DISPLAY_SETUP_ON		BIT(0)
+
+#define REG_ROWINT_SET			0xA0
+#define REG_ROWINT_SET_INT_EN		BIT(0)
+#define REG_ROWINT_SET_INT_ACT_HIGH	BIT(1)
+
+#define REG_BRIGHTNESS			0xE0
+
+/* Defines */
+#define DRIVER_NAME			"ht16k33"
+
+#define MIN_BRIGHTNESS			0x1
+#define MAX_BRIGHTNESS			0x10
+
+#define HT16K33_MATRIX_LED_MAX_COLS	8
+#define HT16K33_MATRIX_LED_MAX_ROWS	16
+#define HT16K33_MATRIX_KEYPAD_MAX_COLS	3
+#define HT16K33_MATRIX_KEYPAD_MAX_ROWS	12
+
+#define BYTES_PER_ROW		(HT16K33_MATRIX_LED_MAX_ROWS / 8)
+#define HT16K33_FB_SIZE		(HT16K33_MATRIX_LED_MAX_COLS * BYTES_PER_ROW)
+
+struct ht16k33_keypad {
+	struct input_dev *dev;
+	spinlock_t lock;
+	struct delayed_work work;
+	uint32_t cols;
+	uint32_t rows;
+	uint32_t row_shift;
+	uint32_t debounce_ms;
+	uint16_t last_key_state[HT16K33_MATRIX_KEYPAD_MAX_COLS];
+};
+
+struct ht16k33_fbdev {
+	struct fb_info *info;
+	uint32_t refresh_rate;
+	uint8_t *buffer;
+	uint8_t *cache;
+	struct delayed_work work;
+};
+
+struct ht16k33_priv {
+	struct i2c_client *client;
+	struct ht16k33_keypad keypad;
+	struct ht16k33_fbdev fbdev;
+	struct workqueue_struct *workqueue;
+};
+
+static struct fb_fix_screeninfo ht16k33_fb_fix = {
+	.id		= DRIVER_NAME,
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_MONO10,
+	.xpanstep	= 0,
+	.ypanstep	= 0,
+	.ywrapstep	= 0,
+	.line_length	= HT16K33_MATRIX_LED_MAX_ROWS,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo ht16k33_fb_var = {
+	.xres = HT16K33_MATRIX_LED_MAX_ROWS,
+	.yres = HT16K33_MATRIX_LED_MAX_COLS,
+	.xres_virtual = HT16K33_MATRIX_LED_MAX_ROWS,
+	.yres_virtual = HT16K33_MATRIX_LED_MAX_COLS,
+	.bits_per_pixel = 1,
+	.red = { 0, 1, 0 },
+	.green = { 0, 1, 0 },
+	.blue = { 0, 1, 0 },
+	.left_margin = 0,
+	.right_margin = 0,
+	.upper_margin = 0,
+	.lower_margin = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+};
+
+static int ht16k33_display_on(struct ht16k33_priv *priv)
+{
+	uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON;
+
+	return i2c_smbus_write_byte(priv->client, data);
+}
+
+static int ht16k33_display_off(struct ht16k33_priv *priv)
+{
+	return i2c_smbus_write_byte(priv->client, REG_DISPLAY_SETUP);
+}
+
+static void ht16k33_fb_queue(struct ht16k33_priv *priv)
+{
+	struct ht16k33_fbdev *fbdev = &priv->fbdev;
+
+	queue_delayed_work(priv->workqueue, &fbdev->work,
+		msecs_to_jiffies(HZ / fbdev->refresh_rate));
+}
+
+static void ht16k33_keypad_queue(struct ht16k33_priv *priv)
+{
+	struct ht16k33_keypad *keypad = &priv->keypad;
+
+	queue_delayed_work(priv->workqueue, &keypad->work,
+		msecs_to_jiffies(keypad->debounce_ms));
+}
+
+/*
+ * This gets the fb data from cache and copies it to ht16k33 display RAM
+ */
+static void ht16k33_fb_update(struct work_struct *work)
+{
+	struct ht16k33_fbdev *fbdev =
+		container_of(work, struct ht16k33_fbdev, work.work);
+	struct ht16k33_priv *priv =
+		container_of(fbdev, struct ht16k33_priv, fbdev);
+
+	uint8_t *p1, *p2;
+	int len, pos = 0, first = -1;
+
+	p1 = fbdev->cache;
+	p2 = fbdev->buffer;
+
+	/* Search for the first byte with changes */
+	while (pos < HT16K33_FB_SIZE && first < 0) {
+		if (*(p1++) - *(p2++))
+			first = pos;
+		pos++;
+	}
+
+	/* No changes found */
+	if (first < 0)
+		goto requeue;
+
+	len = HT16K33_FB_SIZE - first;
+	p1 = fbdev->cache + HT16K33_FB_SIZE - 1;
+	p2 = fbdev->buffer + HT16K33_FB_SIZE - 1;
+
+	/* Determine i2c transfer length */
+	while (len > 1) {
+		if (*(p1--) - *(p2--))
+			break;
+		len--;
+	}
+
+	p1 = fbdev->cache + first;
+	p2 = fbdev->buffer + first;
+	if (!i2c_smbus_write_i2c_block_data(priv->client, first, len, p2))
+		memcpy(p1, p2, len);
+requeue:
+	ht16k33_fb_queue(priv);
+}
+
+static int ht16k33_keypad_start(struct input_dev *dev)
+{
+	struct ht16k33_priv *priv = input_get_drvdata(dev);
+	struct ht16k33_keypad *keypad = &priv->keypad;
+
+	/*
+	 * Schedule an immediate key scan to capture current key state;
+	 * columns will be activated and IRQs be enabled after the scan.
+	 */
+	queue_delayed_work(priv->workqueue, &keypad->work, 0);
+	return 0;
+}
+
+static void ht16k33_keypad_stop(struct input_dev *dev)
+{
+	struct ht16k33_priv *priv = input_get_drvdata(dev);
+	struct ht16k33_keypad *keypad = &priv->keypad;
+
+	cancel_delayed_work(&keypad->work);
+	/*
+	 * ht16k33_keypad_scan() will leave IRQs enabled;
+	 * we should disable them now.
+	 */
+	disable_irq_nosync(priv->client->irq);
+}
+
+static int ht16k33_initialize(struct ht16k33_priv *priv)
+{
+	uint8_t byte;
+	int err;
+	uint8_t data[HT16K33_MATRIX_LED_MAX_COLS * 2];
+
+	/* Clear RAM (8 * 16 bits) */
+	memset(data, 0, sizeof(data));
+	err = i2c_smbus_write_block_data(priv->client, 0, sizeof(data), data);
+	if (err)
+		return err;
+
+	/* Turn on internal oscillator */
+	byte = REG_SYSTEM_SETUP_OSC_ON | REG_SYSTEM_SETUP;
+	err = i2c_smbus_write_byte(priv->client, byte);
+	if (err)
+		return err;
+
+	/* Configure INT pin */
+	byte = REG_ROWINT_SET | REG_ROWINT_SET_INT_ACT_HIGH;
+	if (priv->client->irq > 0)
+		byte |= REG_ROWINT_SET_INT_EN;
+	return i2c_smbus_write_byte(priv->client, byte);
+}
+
+/*
+ * This gets the keys from keypad and reports it to input subsystem
+ */
+static void ht16k33_keypad_scan(struct work_struct *work)
+{
+	struct ht16k33_keypad *keypad =
+		container_of(work, struct ht16k33_keypad, work.work);
+	struct ht16k33_priv *priv =
+		container_of(keypad, struct ht16k33_priv, keypad);
+	const unsigned short *keycodes = keypad->dev->keycode;
+	uint16_t bits_changed, new_state[HT16K33_MATRIX_KEYPAD_MAX_COLS];
+	uint8_t data[HT16K33_MATRIX_KEYPAD_MAX_COLS * 2];
+	int row, col, code;
+	bool reschedule = false;
+
+	if (i2c_smbus_read_i2c_block_data(priv->client, 0x40, 6, data) != 6) {
+		dev_err(&priv->client->dev, "Failed to read key data\n");
+		goto end;
+	}
+
+	for (col = 0; col < keypad->cols; col++) {
+		new_state[col] = (data[col * 2 + 1] << 8) | data[col * 2];
+		if (new_state[col])
+			reschedule = true;
+		bits_changed = keypad->last_key_state[col] ^ new_state[col];
+
+		while (bits_changed) {
+			row = ffs(bits_changed) - 1;
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+			input_event(keypad->dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(keypad->dev, keycodes[code],
+					 new_state[col] & BIT(row));
+			bits_changed &= ~BIT(row);
+		}
+	}
+	input_sync(keypad->dev);
+	memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+end:
+	if (reschedule)
+		ht16k33_keypad_queue(priv);
+	else
+		enable_irq(priv->client->irq);
+}
+
+static irqreturn_t ht16k33_irq_thread(int irq, void *dev)
+{
+	struct ht16k33_priv *priv = dev;
+
+	disable_irq_nosync(priv->client->irq);
+	ht16k33_keypad_queue(priv);
+
+	return IRQ_HANDLED;
+}
+
+static int ht16k33_bl_update_status(struct backlight_device *bl)
+{
+	int brightness = bl->props.brightness;
+	struct ht16k33_priv *priv = bl_get_data(bl);
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
+	    bl->props.state & BL_CORE_FBBLANK || brightness == 0) {
+		return ht16k33_display_off(priv);
+	}
+
+	ht16k33_display_on(priv);
+	return i2c_smbus_write_byte(priv->client,
+				    REG_BRIGHTNESS | (brightness - 1));
+}
+
+static int ht16k33_bl_check_fb(struct backlight_device *bl, struct fb_info *fi)
+{
+	struct ht16k33_priv *priv = bl_get_data(bl);
+
+	return (fi == NULL) || (fi->par == priv);
+}
+
+static const struct backlight_ops ht16k33_bl_ops = {
+	.update_status	= ht16k33_bl_update_status,
+	.check_fb	= ht16k33_bl_check_fb,
+};
+
+static int ht16k33_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	struct ht16k33_priv *priv = info->par;
+
+	return vm_insert_page(vma, vma->vm_start,
+			      virt_to_page(priv->fbdev.buffer));
+}
+
+static struct fb_ops ht16k33_fb_ops = {
+	.owner = THIS_MODULE,
+	.fb_read = fb_sys_read,
+	.fb_write = fb_sys_write,
+	.fb_fillrect = sys_fillrect,
+	.fb_copyarea = sys_copyarea,
+	.fb_imageblit = sys_imageblit,
+	.fb_mmap = ht16k33_mmap,
+};
+
+static int ht16k33_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	int err;
+	uint32_t rows, cols, dft_brightness;
+	struct backlight_device *bl;
+	struct backlight_properties bl_props;
+	struct ht16k33_priv *priv;
+	struct ht16k33_keypad *keypad;
+	struct ht16k33_fbdev *fbdev;
+	struct device_node *node = client->dev.of_node;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c_check_functionality error\n");
+		return -EIO;
+	}
+
+	if (client->irq <= 0) {
+		dev_err(&client->dev, "No IRQ specified\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	i2c_set_clientdata(client, priv);
+	fbdev = &priv->fbdev;
+	keypad = &priv->keypad;
+
+	priv->workqueue = create_singlethread_workqueue(DRIVER_NAME "-wq");
+	if (priv->workqueue == NULL)
+		return -ENOMEM;
+
+	err = ht16k33_initialize(priv);
+	if (err)
+		goto err_destroy_wq;
+
+	/* Framebuffer (2 bytes per column) */
+	BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE);
+	fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL);
+	if (!fbdev->buffer) {
+		err = -ENOMEM;
+		goto err_free_fbdev;
+	}
+
+	fbdev->cache = devm_kmalloc(&client->dev, HT16K33_FB_SIZE, GFP_KERNEL);
+	if (!fbdev->cache) {
+		err = -ENOMEM;
+		goto err_fbdev_buffer;
+	}
+
+	fbdev->info = framebuffer_alloc(0, &client->dev);
+	if (!fbdev->info) {
+		err = -ENOMEM;
+		goto err_fbdev_buffer;
+	}
+
+	err = of_property_read_u32(node, "refresh-rate-hz",
+		&fbdev->refresh_rate);
+	if (err) {
+		dev_err(&client->dev, "refresh rate not specified\n");
+		goto err_fbdev_info;
+	}
+	fb_bl_default_curve(fbdev->info, 0, MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+
+	INIT_DELAYED_WORK(&fbdev->work, ht16k33_fb_update);
+	fbdev->info->fbops = &ht16k33_fb_ops;
+	fbdev->info->screen_base = (char __iomem *) fbdev->buffer;
+	fbdev->info->screen_size = HT16K33_FB_SIZE;
+	fbdev->info->fix = ht16k33_fb_fix;
+	fbdev->info->var = ht16k33_fb_var;
+	fbdev->info->pseudo_palette = NULL;
+	fbdev->info->flags = FBINFO_FLAG_DEFAULT;
+	fbdev->info->par = priv;
+
+	err = register_framebuffer(fbdev->info);
+	if (err)
+		goto err_fbdev_info;
+
+	/* Keypad */
+	keypad->dev = devm_input_allocate_device(&client->dev);
+	if (!keypad->dev) {
+		err = -ENOMEM;
+		goto err_fbdev_unregister;
+	}
+
+	keypad->dev->name = DRIVER_NAME"-keypad";
+	keypad->dev->id.bustype = BUS_I2C;
+	keypad->dev->open = ht16k33_keypad_start;
+	keypad->dev->close = ht16k33_keypad_stop;
+
+	if (!of_get_property(node, "linux,no-autorepeat", NULL))
+		__set_bit(EV_REP, keypad->dev->evbit);
+
+	err = of_property_read_u32(node, "debounce-delay-ms",
+				   &keypad->debounce_ms);
+	if (err) {
+		dev_err(&client->dev, "key debounce delay not specified\n");
+		goto err_fbdev_unregister;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					ht16k33_irq_thread,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					DRIVER_NAME, priv);
+	if (err) {
+		dev_err(&client->dev, "irq request failed %d, error %d\n",
+			client->irq, err);
+		goto err_fbdev_unregister;
+	}
+
+	disable_irq_nosync(client->irq);
+	rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS;
+	cols = HT16K33_MATRIX_KEYPAD_MAX_COLS;
+	err = matrix_keypad_parse_of_params(&client->dev, &rows, &cols);
+	if (err)
+		goto err_fbdev_unregister;
+
+	err = matrix_keypad_build_keymap(NULL, NULL, rows, cols, NULL,
+					 keypad->dev);
+	if (err) {
+		dev_err(&client->dev, "failed to build keymap\n");
+		goto err_fbdev_unregister;
+	}
+
+	input_set_drvdata(keypad->dev, priv);
+	keypad->rows = rows;
+	keypad->cols = cols;
+	keypad->row_shift = get_count_order(cols);
+	INIT_DELAYED_WORK(&keypad->work, ht16k33_keypad_scan);
+
+	err = input_register_device(keypad->dev);
+	if (err)
+		goto err_fbdev_unregister;
+
+	/* Backlight */
+	memset(&bl_props, 0, sizeof(struct backlight_properties));
+	bl_props.type = BACKLIGHT_RAW;
+	bl_props.max_brightness = MAX_BRIGHTNESS;
+
+	bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl",
+					    &client->dev, priv,
+					    &ht16k33_bl_ops, &bl_props);
+	if (IS_ERR(bl)) {
+		dev_err(&client->dev, "failed to register backlight\n");
+		err = PTR_ERR(bl);
+		goto err_keypad_unregister;
+	}
+
+	err = of_property_read_u32(node, "default-brightness-level",
+				   &dft_brightness);
+	if (err) {
+		dft_brightness = MAX_BRIGHTNESS;
+	} else if (dft_brightness > MAX_BRIGHTNESS) {
+		dev_warn(&client->dev,
+			 "invalid default brightness level: %u, using %u\n",
+			 dft_brightness, MAX_BRIGHTNESS);
+		dft_brightness = MAX_BRIGHTNESS;
+	}
+
+	bl->props.brightness = dft_brightness;
+	ht16k33_bl_update_status(bl);
+
+	ht16k33_fb_queue(priv);
+	return 0;
+
+err_keypad_unregister:
+	input_unregister_device(keypad->dev);
+err_fbdev_unregister:
+	unregister_framebuffer(fbdev->info);
+err_fbdev_info:
+	framebuffer_release(fbdev->info);
+err_fbdev_buffer:
+	free_page((unsigned long) fbdev->buffer);
+err_free_fbdev:
+	kfree(fbdev);
+err_destroy_wq:
+	destroy_workqueue(priv->workqueue);
+
+	return err;
+}
+
+static int ht16k33_remove(struct i2c_client *client)
+{
+	struct ht16k33_priv *priv = i2c_get_clientdata(client);
+	struct ht16k33_keypad *keypad = &priv->keypad;
+	struct ht16k33_fbdev *fbdev = &priv->fbdev;
+
+	ht16k33_keypad_stop(keypad->dev);
+
+	cancel_delayed_work(&fbdev->work);
+	unregister_framebuffer(fbdev->info);
+	framebuffer_release(fbdev->info);
+	free_page((unsigned long) fbdev->buffer);
+
+	destroy_workqueue(priv->workqueue);
+	return 0;
+}
+
+static const struct i2c_device_id ht16k33_i2c_match[] = {
+	{ "ht16k33", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ht16k33_i2c_match);
+
+static const struct of_device_id ht16k33_of_match[] = {
+	{ .compatible = "holtek,ht16k33", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ht16k33_of_match);
+
+static struct i2c_driver ht16k33_driver = {
+	.probe		= ht16k33_probe,
+	.remove		= ht16k33_remove,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.of_match_table	= of_match_ptr(ht16k33_of_match),
+	},
+	.id_table = ht16k33_i2c_match,
+};
+module_i2c_driver(ht16k33_driver);
+
+MODULE_DESCRIPTION("Holtek HT16K33 driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robin van der Gracht <robin@protonic.nl>");

drivers/char/Kconfig

@@ -17,7 +17,6 @@ config DEVMEM
 
 config DEVKMEM
 	bool "/dev/kmem virtual device support"
-	default y
 	help
 	  Say Y here if you want to support the /dev/kmem device. The
 	  /dev/kmem device is rarely used, but can be used for certain
@@ -579,7 +578,7 @@ config DEVPORT
 source "drivers/s390/char/Kconfig"
 
 config TILE_SROM
-	bool "Character-device access via hypervisor to the Tilera SPI ROM"
+	tristate "Character-device access via hypervisor to the Tilera SPI ROM"
 	depends on TILE
 	default y
 	---help---

drivers/char/pcmcia/Kconfig

@@ -43,6 +43,17 @@ config CARDMAN_4040
 	  (http://www.omnikey.com/), or a current development version of OpenCT
 	  (http://www.opensc-project.org/opensc).
 
+config SCR24X
+	tristate "SCR24x Chip Card Interface support"
+	depends on PCMCIA
+	help
+	  Enable support for the SCR24x PCMCIA Chip Card Interface.
+
+	  To compile this driver as a module, choose M here.
+	  The module will be called scr24x_cs..
+
+	  If unsure say N.
+
 config IPWIRELESS
 	tristate "IPWireless 3G UMTS PCMCIA card support"
 	depends on PCMCIA && NETDEVICES && TTY

drivers/char/pcmcia/Makefile

@@ -7,3 +7,4 @@
 obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
 obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o
 obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o
+obj-$(CONFIG_SCR24X) += scr24x_cs.o

drivers/char/pcmcia/scr24x_cs.c

@@ -0,0 +1,373 @@
+/*
+ * SCR24x PCMCIA Smart Card Reader Driver
+ *
+ * Copyright (C) 2005-2006 TL Sudheendran
+ * Copyright (C) 2016 Lubomir Rintel
+ *
+ * Derived from "scr24x_v4.2.6_Release.tar.gz" driver by TL Sudheendran.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/cdev.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#define CCID_HEADER_SIZE	10
+#define CCID_LENGTH_OFFSET	1
+#define CCID_MAX_LEN		271
+
+#define SCR24X_DATA(n)		(1 + n)
+#define SCR24X_CMD_STATUS	7
+#define CMD_START		0x40
+#define CMD_WRITE_BYTE		0x41
+#define CMD_READ_BYTE		0x42
+#define STATUS_BUSY		0x80
+
+struct scr24x_dev {
+	struct device *dev;
+	struct cdev c_dev;
+	unsigned char buf[CCID_MAX_LEN];
+	int devno;
+	struct mutex lock;
+	struct kref refcnt;
+	u8 __iomem *regs;
+};
+
+#define SCR24X_DEVS 8
+static DECLARE_BITMAP(scr24x_minors, SCR24X_DEVS);
+
+static struct class *scr24x_class;
+static dev_t scr24x_devt;
+
+static void scr24x_delete(struct kref *kref)
+{
+	struct scr24x_dev *dev = container_of(kref, struct scr24x_dev,
+								refcnt);
+
+	kfree(dev);
+}
+
+static int scr24x_wait_ready(struct scr24x_dev *dev)
+{
+	u_char status;
+	int timeout = 100;
+
+	do {
+		status = ioread8(dev->regs + SCR24X_CMD_STATUS);
+		if (!(status & STATUS_BUSY))
+			return 0;
+
+		msleep(20);
+	} while (--timeout);
+
+	return -EIO;
+}
+
+static int scr24x_open(struct inode *inode, struct file *filp)
+{
+	struct scr24x_dev *dev = container_of(inode->i_cdev,
+				struct scr24x_dev, c_dev);
+
+	kref_get(&dev->refcnt);
+	filp->private_data = dev;
+
+	return nonseekable_open(inode, filp);
+}
+
+static int scr24x_release(struct inode *inode, struct file *filp)
+{
+	struct scr24x_dev *dev = filp->private_data;
+
+	/* We must not take the dev->lock here as scr24x_delete()
+	 * might be called to remove the dev structure altogether.
+	 * We don't need the lock anyway, since after the reference
+	 * acquired in probe() is released in remove() the chrdev
+	 * is already unregistered and noone can possibly acquire
+	 * a reference via open() anymore. */
+	kref_put(&dev->refcnt, scr24x_delete);
+	return 0;
+}
+
+static int read_chunk(struct scr24x_dev *dev, size_t offset, size_t limit)
+{
+	size_t i, y;
+	int ret;
+
+	for (i = offset; i < limit; i += 5) {
+		iowrite8(CMD_READ_BYTE, dev->regs + SCR24X_CMD_STATUS);
+		ret = scr24x_wait_ready(dev);
+		if (ret < 0)
+			return ret;
+
+		for (y = 0; y < 5 && i + y < limit; y++)
+			dev->buf[i + y] = ioread8(dev->regs + SCR24X_DATA(y));
+	}
+
+	return 0;
+}
+
+static ssize_t scr24x_read(struct file *filp, char __user *buf, size_t count,
+								loff_t *ppos)
+{
+	struct scr24x_dev *dev = filp->private_data;
+	int ret;
+	int len;
+
+	if (count < CCID_HEADER_SIZE)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&dev->lock))
+		return -ERESTARTSYS;
+
+	if (!dev->dev) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = scr24x_wait_ready(dev);
+	if (ret < 0)
+		goto out;
+	len = CCID_HEADER_SIZE;
+	ret = read_chunk(dev, 0, len);
+	if (ret < 0)
+		goto out;
+
+	len += le32_to_cpu(*(__le32 *)(&dev->buf[CCID_LENGTH_OFFSET]));
+	if (len > sizeof(dev->buf)) {
+		ret = -EIO;
+		goto out;
+	}
+	ret = read_chunk(dev, CCID_HEADER_SIZE, len);
+	if (ret < 0)
+		goto out;
+
+	if (len < count)
+		count = len;
+
+	if (copy_to_user(buf, dev->buf, count)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = count;
+out:
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+static ssize_t scr24x_write(struct file *filp, const char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	struct scr24x_dev *dev = filp->private_data;
+	size_t i, y;
+	int ret;
+
+	if (mutex_lock_interruptible(&dev->lock))
+		return -ERESTARTSYS;
+
+	if (!dev->dev) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (count > sizeof(dev->buf)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (copy_from_user(dev->buf, buf, count)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = scr24x_wait_ready(dev);
+	if (ret < 0)
+		goto out;
+
+	iowrite8(CMD_START, dev->regs + SCR24X_CMD_STATUS);
+	ret = scr24x_wait_ready(dev);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < count; i += 5) {
+		for (y = 0; y < 5 && i + y < count; y++)
+			iowrite8(dev->buf[i + y], dev->regs + SCR24X_DATA(y));
+
+		iowrite8(CMD_WRITE_BYTE, dev->regs + SCR24X_CMD_STATUS);
+		ret = scr24x_wait_ready(dev);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = count;
+out:
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+static const struct file_operations scr24x_fops = {
+	.owner		= THIS_MODULE,
+	.read		= scr24x_read,
+	.write		= scr24x_write,
+	.open		= scr24x_open,
+	.release	= scr24x_release,
+	.llseek		= no_llseek,
+};
+
+static int scr24x_config_check(struct pcmcia_device *link, void *priv_data)
+{
+	if (resource_size(link->resource[PCMCIA_IOPORT_0]) != 0x11)
+		return -ENODEV;
+	return pcmcia_request_io(link);
+}
+
+static int scr24x_probe(struct pcmcia_device *link)
+{
+	struct scr24x_dev *dev;
+	int ret;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->devno = find_first_zero_bit(scr24x_minors, SCR24X_DEVS);
+	if (dev->devno >= SCR24X_DEVS) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	mutex_init(&dev->lock);
+	kref_init(&dev->refcnt);
+
+	link->priv = dev;
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
+	ret = pcmcia_loop_config(link, scr24x_config_check, NULL);
+	if (ret < 0)
+		goto err;
+
+	dev->dev = &link->dev;
+	dev->regs = devm_ioport_map(&link->dev,
+				link->resource[PCMCIA_IOPORT_0]->start,
+				resource_size(link->resource[PCMCIA_IOPORT_0]));
+	if (!dev->regs) {
+		ret = -EIO;
+		goto err;
+	}
+
+	cdev_init(&dev->c_dev, &scr24x_fops);
+	dev->c_dev.owner = THIS_MODULE;
+	dev->c_dev.ops = &scr24x_fops;
+	ret = cdev_add(&dev->c_dev, MKDEV(MAJOR(scr24x_devt), dev->devno), 1);
+	if (ret < 0)
+		goto err;
+
+	ret = pcmcia_enable_device(link);
+	if (ret < 0) {
+		pcmcia_disable_device(link);
+		goto err;
+	}
+
+	device_create(scr24x_class, NULL, MKDEV(MAJOR(scr24x_devt), dev->devno),
+		      NULL, "scr24x%d", dev->devno);
+
+	dev_info(&link->dev, "SCR24x Chip Card Interface\n");
+	return 0;
+
+err:
+	if (dev->devno < SCR24X_DEVS)
+		clear_bit(dev->devno, scr24x_minors);
+	kfree (dev);
+	return ret;
+}
+
+static void scr24x_remove(struct pcmcia_device *link)
+{
+	struct scr24x_dev *dev = (struct scr24x_dev *)link->priv;
+
+	device_destroy(scr24x_class, MKDEV(MAJOR(scr24x_devt), dev->devno));
+	mutex_lock(&dev->lock);
+	pcmcia_disable_device(link);
+	cdev_del(&dev->c_dev);
+	clear_bit(dev->devno, scr24x_minors);
+	dev->dev = NULL;
+	mutex_unlock(&dev->lock);
+
+	kref_put(&dev->refcnt, scr24x_delete);
+}
+
+static const struct pcmcia_device_id scr24x_ids[] = {
+	PCMCIA_DEVICE_PROD_ID12("HP", "PC Card Smart Card Reader",
+					0x53cb94f9, 0xbfdf89a5),
+	PCMCIA_DEVICE_PROD_ID1("SCR241 PCMCIA", 0x6271efa3),
+	PCMCIA_DEVICE_PROD_ID1("SCR243 PCMCIA", 0x2054e8de),
+	PCMCIA_DEVICE_PROD_ID1("SCR24x PCMCIA", 0x54a33665),
+	PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, scr24x_ids);
+
+static struct pcmcia_driver scr24x_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "scr24x_cs",
+	.probe		= scr24x_probe,
+	.remove		= scr24x_remove,
+	.id_table	= scr24x_ids,
+};
+
+static int __init scr24x_init(void)
+{
+	int ret;
+
+	scr24x_class = class_create(THIS_MODULE, "scr24x");
+	if (IS_ERR(scr24x_class))
+		return PTR_ERR(scr24x_class);
+
+	ret = alloc_chrdev_region(&scr24x_devt, 0, SCR24X_DEVS, "scr24x");
+	if (ret < 0)  {
+		class_destroy(scr24x_class);
+		return ret;
+	}
+
+	ret = pcmcia_register_driver(&scr24x_driver);
+	if (ret < 0) {
+		unregister_chrdev_region(scr24x_devt, SCR24X_DEVS);
+		class_destroy(scr24x_class);
+	}
+
+	return ret;
+}
+
+static void __exit scr24x_exit(void)
+{
+	pcmcia_unregister_driver(&scr24x_driver);
+	unregister_chrdev_region(scr24x_devt, SCR24X_DEVS);
+	class_destroy(scr24x_class);
+}
+
+module_init(scr24x_init);
+module_exit(scr24x_exit);
+
+MODULE_AUTHOR("Lubomir Rintel");
+MODULE_DESCRIPTION("SCR24x PCMCIA Smart Card Reader Driver");
+MODULE_LICENSE("GPL");

drivers/char/ppdev.c

@@ -86,6 +86,9 @@ struct pp_struct {
 	long default_inactivity;
 };
 
+/* should we use PARDEVICE_MAX here? */
+static struct device *devices[PARPORT_MAX];
+
 /* pp_struct.flags bitfields */
 #define PP_CLAIMED    (1<<0)
 #define PP_EXCL       (1<<1)
@@ -294,7 +297,7 @@ static int register_device(int minor, struct pp_struct *pp)
 
 	port = parport_find_number(minor);
 	if (!port) {
-		printk(KERN_WARNING "%s: no associated port!\n", name);
+		pr_warn("%s: no associated port!\n", name);
 		kfree(name);
 		return -ENXIO;
 	}
@@ -305,10 +308,10 @@ static int register_device(int minor, struct pp_struct *pp)
 	ppdev_cb.private = pp;
 	pdev = parport_register_dev_model(port, name, &ppdev_cb, minor);
 	parport_put_port(port);
+	kfree(name);
 
 	if (!pdev) {
-		printk(KERN_WARNING "%s: failed to register device!\n", name);
-		kfree(name);
+		pr_warn("%s: failed to register device!\n", name);
 		return -ENXIO;
 	}
 
@@ -789,13 +792,29 @@ static const struct file_operations pp_fops = {
 
 static void pp_attach(struct parport *port)
 {
-	device_create(ppdev_class, port->dev, MKDEV(PP_MAJOR, port->number),
-		      NULL, "parport%d", port->number);
+	struct device *ret;
+
+	if (devices[port->number])
+		return;
+
+	ret = device_create(ppdev_class, port->dev,
+			    MKDEV(PP_MAJOR, port->number), NULL,
+			    "parport%d", port->number);
+	if (IS_ERR(ret)) {
+		pr_err("Failed to create device parport%d\n",
+		       port->number);
+		return;
+	}
+	devices[port->number] = ret;
 }
 
 static void pp_detach(struct parport *port)
 {
+	if (!devices[port->number])
+		return;
+
 	device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number));
+	devices[port->number] = NULL;
 }
 
 static int pp_probe(struct pardevice *par_dev)
@@ -822,8 +841,7 @@ static int __init ppdev_init(void)
 	int err = 0;
 
 	if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) {
-		printk(KERN_WARNING CHRDEV ": unable to get major %d\n",
-		       PP_MAJOR);
+		pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR);
 		return -EIO;
 	}
 	ppdev_class = class_create(THIS_MODULE, CHRDEV);
@@ -833,11 +851,11 @@ static int __init ppdev_init(void)
 	}
 	err = parport_register_driver(&pp_driver);
 	if (err < 0) {
-		printk(KERN_WARNING CHRDEV ": unable to register with parport\n");
+		pr_warn(CHRDEV ": unable to register with parport\n");
 		goto out_class;
 	}
 
-	printk(KERN_INFO PP_VERSION "\n");
+	pr_info(PP_VERSION "\n");
 	goto out;
 
 out_class:

drivers/char/snsc.c

@@ -285,7 +285,7 @@ scdrv_write(struct file *file, const char __user *buf,
 		DECLARE_WAITQUEUE(wait, current);
 
 		if (file->f_flags & O_NONBLOCK) {
-			spin_unlock(&sd->sd_wlock);
+			spin_unlock_irqrestore(&sd->sd_wlock, flags);
 			up(&sd->sd_wbs);
 			return -EAGAIN;
 		}

drivers/char/tile-srom.c

@@ -312,7 +312,8 @@ ATTRIBUTE_GROUPS(srom_dev);
 
 static char *srom_devnode(struct device *dev, umode_t *mode)
 {
-	*mode = S_IRUGO | S_IWUSR;
+	if (mode)
+		*mode = 0644;
 	return kasprintf(GFP_KERNEL, "srom/%s", dev_name(dev));
 }
 

drivers/fpga/Kconfig

@@ -13,12 +13,26 @@ config FPGA
 
 if FPGA
 
+config FPGA_REGION
+	tristate "FPGA Region"
+	depends on OF && FPGA_BRIDGE
+	help
+	  FPGA Regions allow loading FPGA images under control of
+	  the Device Tree.
+
 config FPGA_MGR_SOCFPGA
 	tristate "Altera SOCFPGA FPGA Manager"
-	depends on ARCH_SOCFPGA
+	depends on ARCH_SOCFPGA || COMPILE_TEST
 	help
 	  FPGA manager driver support for Altera SOCFPGA.
 
+config FPGA_MGR_SOCFPGA_A10
+	tristate "Altera SoCFPGA Arria10"
+	depends on ARCH_SOCFPGA || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  FPGA manager driver support for Altera Arria10 SoCFPGA.
+
 config FPGA_MGR_ZYNQ_FPGA
 	tristate "Xilinx Zynq FPGA"
 	depends on ARCH_ZYNQ || COMPILE_TEST
@@ -26,6 +40,29 @@ config FPGA_MGR_ZYNQ_FPGA
 	help
 	  FPGA manager driver support for Xilinx Zynq FPGAs.
 
+config FPGA_BRIDGE
+	tristate "FPGA Bridge Framework"
+	depends on OF
+	help
+	  Say Y here if you want to support bridges connected between host
+	  processors and FPGAs or between FPGAs.
+
+config SOCFPGA_FPGA_BRIDGE
+	tristate "Altera SoCFPGA FPGA Bridges"
+	depends on ARCH_SOCFPGA && FPGA_BRIDGE
+	help
+	  Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
+	  devices.
+
+config ALTERA_FREEZE_BRIDGE
+	tristate "Altera FPGA Freeze Bridge"
+	depends on ARCH_SOCFPGA && FPGA_BRIDGE
+	help
+	  Say Y to enable drivers for Altera FPGA Freeze bridges.  A
+	  freeze bridge is a bridge that exists in the FPGA fabric to
+	  isolate one region of the FPGA from the busses while that
+	  region is being reprogrammed.
+
 endif # FPGA
 
 endmenu

drivers/fpga/Makefile

@@ -7,4 +7,13 @@ obj-$(CONFIG_FPGA)			+= fpga-mgr.o
 
 # FPGA Manager Drivers
 obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
 obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
+
+# FPGA Bridge Drivers
+obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
+obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE)	+= altera-hps2fpga.o altera-fpga2sdram.o
+obj-$(CONFIG_ALTERA_FREEZE_BRIDGE)	+= altera-freeze-bridge.o
+
+# High Level Interfaces
+obj-$(CONFIG_FPGA_REGION)		+= fpga-region.o

drivers/fpga/altera-fpga2sdram.c

@@ -0,0 +1,180 @@
+/*
+ * FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages a bridge between an FPGA and the SDRAM used by the ARM
+ * host processor system (HPS).
+ *
+ * The bridge contains 4 read ports, 4 write ports, and 6 command ports.
+ * Reconfiguring these ports requires that no SDRAM transactions occur during
+ * reconfiguration.  The code reconfiguring the ports cannot run out of SDRAM
+ * nor can the FPGA access the SDRAM during reconfiguration.  This driver does
+ * not support reconfiguring the ports.  The ports are configured by code
+ * running out of on chip ram before Linux is started and the configuration
+ * is passed in a handoff register in the system manager.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration.  Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+#define ALT_SDR_CTL_FPGAPORTRST_OFST		0x80
+#define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK	0x00003fff
+#define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT	0
+#define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT	4
+#define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT	8
+
+/*
+ * From the Cyclone V HPS Memory Map document:
+ *   These registers are used to store handoff information between the
+ *   preloader and the OS. These 8 registers can be used to store any
+ *   information. The contents of these registers have no impact on
+ *   the state of the HPS hardware.
+ */
+#define SYSMGR_ISWGRP_HANDOFF3          (0x8C)
+
+#define F2S_BRIDGE_NAME "fpga2sdram"
+
+struct alt_fpga2sdram_data {
+	struct device *dev;
+	struct regmap *sdrctl;
+	int mask;
+};
+
+static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge)
+{
+	struct alt_fpga2sdram_data *priv = bridge->priv;
+	int value;
+
+	regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value);
+
+	return (value & priv->mask) == priv->mask;
+}
+
+static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv,
+					     bool enable)
+{
+	return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST,
+				  priv->mask, enable ? priv->mask : 0);
+}
+
+static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+	return _alt_fpga2sdram_enable_set(bridge->priv, enable);
+}
+
+struct prop_map {
+	char *prop_name;
+	u32 *prop_value;
+	u32 prop_max;
+};
+
+static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = {
+	.enable_set = alt_fpga2sdram_enable_set,
+	.enable_show = alt_fpga2sdram_enable_show,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+	{ .compatible = "altr,socfpga-fpga2sdram-bridge" },
+	{},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct alt_fpga2sdram_data *priv;
+	u32 enable;
+	struct regmap *sysmgr;
+	int ret = 0;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
+	if (IS_ERR(priv->sdrctl)) {
+		dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n");
+		return PTR_ERR(priv->sdrctl);
+	}
+
+	sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
+	if (IS_ERR(sysmgr)) {
+		dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n");
+		return PTR_ERR(sysmgr);
+	}
+
+	/* Get f2s bridge configuration saved in handoff register */
+	regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask);
+
+	ret = fpga_bridge_register(dev, F2S_BRIDGE_NAME,
+				   &altera_fpga2sdram_br_ops, priv);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "driver initialized with handoff %08x\n", priv->mask);
+
+	if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+		if (enable > 1) {
+			dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+		} else {
+			dev_info(dev, "%s bridge\n",
+				 (enable ? "enabling" : "disabling"));
+			ret = _alt_fpga2sdram_enable_set(priv, enable);
+			if (ret) {
+				fpga_bridge_unregister(&pdev->dev);
+				return ret;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+	fpga_bridge_unregister(&pdev->dev);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver altera_fpga_driver = {
+	.probe = alt_fpga_bridge_probe,
+	.remove = alt_fpga_bridge_remove,
+	.driver = {
+		.name	= "altera_fpga2sdram_bridge",
+		.of_match_table = of_match_ptr(altera_fpga_of_match),
+	},
+};
+
+module_platform_driver(altera_fpga_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");

drivers/fpga/altera-freeze-bridge.c

@@ -0,0 +1,273 @@
+/*
+ * FPGA Freeze Bridge Controller
+ *
+ *  Copyright (C) 2016 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/fpga/fpga-bridge.h>
+
+#define FREEZE_CSR_STATUS_OFFSET		0
+#define FREEZE_CSR_CTRL_OFFSET			4
+#define FREEZE_CSR_ILLEGAL_REQ_OFFSET		8
+#define FREEZE_CSR_REG_VERSION			12
+
+#define FREEZE_CSR_SUPPORTED_VERSION		2
+
+#define FREEZE_CSR_STATUS_FREEZE_REQ_DONE	BIT(0)
+#define FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE	BIT(1)
+
+#define FREEZE_CSR_CTRL_FREEZE_REQ		BIT(0)
+#define FREEZE_CSR_CTRL_RESET_REQ		BIT(1)
+#define FREEZE_CSR_CTRL_UNFREEZE_REQ		BIT(2)
+
+#define FREEZE_BRIDGE_NAME			"freeze"
+
+struct altera_freeze_br_data {
+	struct device *dev;
+	void __iomem *base_addr;
+	bool enable;
+};
+
+/*
+ * Poll status until status bit is set or we have a timeout.
+ */
+static int altera_freeze_br_req_ack(struct altera_freeze_br_data *priv,
+				    u32 timeout, u32 req_ack)
+{
+	struct device *dev = priv->dev;
+	void __iomem *csr_illegal_req_addr = priv->base_addr +
+					     FREEZE_CSR_ILLEGAL_REQ_OFFSET;
+	u32 status, illegal, ctrl;
+	int ret = -ETIMEDOUT;
+
+	do {
+		illegal = readl(csr_illegal_req_addr);
+		if (illegal) {
+			dev_err(dev, "illegal request detected 0x%x", illegal);
+
+			writel(1, csr_illegal_req_addr);
+
+			illegal = readl(csr_illegal_req_addr);
+			if (illegal)
+				dev_err(dev, "illegal request not cleared 0x%x",
+					illegal);
+
+			ret = -EINVAL;
+			break;
+		}
+
+		status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+		dev_dbg(dev, "%s %x %x\n", __func__, status, req_ack);
+		status &= req_ack;
+		if (status) {
+			ctrl = readl(priv->base_addr + FREEZE_CSR_CTRL_OFFSET);
+			dev_dbg(dev, "%s request %x acknowledged %x %x\n",
+				__func__, req_ack, status, ctrl);
+			ret = 0;
+			break;
+		}
+
+		udelay(1);
+	} while (timeout--);
+
+	if (ret == -ETIMEDOUT)
+		dev_err(dev, "%s timeout waiting for 0x%x\n",
+			__func__, req_ack);
+
+	return ret;
+}
+
+static int altera_freeze_br_do_freeze(struct altera_freeze_br_data *priv,
+				      u32 timeout)
+{
+	struct device *dev = priv->dev;
+	void __iomem *csr_ctrl_addr = priv->base_addr +
+				      FREEZE_CSR_CTRL_OFFSET;
+	u32 status;
+	int ret;
+
+	status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+	dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+	if (status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE) {
+		dev_dbg(dev, "%s bridge already disabled %d\n",
+			__func__, status);
+		return 0;
+	} else if (!(status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)) {
+		dev_err(dev, "%s bridge not enabled %d\n", __func__, status);
+		return -EINVAL;
+	}
+
+	writel(FREEZE_CSR_CTRL_FREEZE_REQ, csr_ctrl_addr);
+
+	ret = altera_freeze_br_req_ack(priv, timeout,
+				       FREEZE_CSR_STATUS_FREEZE_REQ_DONE);
+
+	if (ret)
+		writel(0, csr_ctrl_addr);
+	else
+		writel(FREEZE_CSR_CTRL_RESET_REQ, csr_ctrl_addr);
+
+	return ret;
+}
+
+static int altera_freeze_br_do_unfreeze(struct altera_freeze_br_data *priv,
+					u32 timeout)
+{
+	struct device *dev = priv->dev;
+	void __iomem *csr_ctrl_addr = priv->base_addr +
+				      FREEZE_CSR_CTRL_OFFSET;
+	u32 status;
+	int ret;
+
+	writel(0, csr_ctrl_addr);
+
+	status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+	dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+	if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE) {
+		dev_dbg(dev, "%s bridge already enabled %d\n",
+			__func__, status);
+		return 0;
+	} else if (!(status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE)) {
+		dev_err(dev, "%s bridge not frozen %d\n", __func__, status);
+		return -EINVAL;
+	}
+
+	writel(FREEZE_CSR_CTRL_UNFREEZE_REQ, csr_ctrl_addr);
+
+	ret = altera_freeze_br_req_ack(priv, timeout,
+				       FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE);
+
+	status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+	dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+	writel(0, csr_ctrl_addr);
+
+	return ret;
+}
+
+/*
+ * enable = 1 : allow traffic through the bridge
+ * enable = 0 : disable traffic through the bridge
+ */
+static int altera_freeze_br_enable_set(struct fpga_bridge *bridge,
+				       bool enable)
+{
+	struct altera_freeze_br_data *priv = bridge->priv;
+	struct fpga_image_info *info = bridge->info;
+	u32 timeout = 0;
+	int ret;
+
+	if (enable) {
+		if (info)
+			timeout = info->enable_timeout_us;
+
+		ret = altera_freeze_br_do_unfreeze(bridge->priv, timeout);
+	} else {
+		if (info)
+			timeout = info->disable_timeout_us;
+
+		ret = altera_freeze_br_do_freeze(bridge->priv, timeout);
+	}
+
+	if (!ret)
+		priv->enable = enable;
+
+	return ret;
+}
+
+static int altera_freeze_br_enable_show(struct fpga_bridge *bridge)
+{
+	struct altera_freeze_br_data *priv = bridge->priv;
+
+	return priv->enable;
+}
+
+static struct fpga_bridge_ops altera_freeze_br_br_ops = {
+	.enable_set = altera_freeze_br_enable_set,
+	.enable_show = altera_freeze_br_enable_show,
+};
+
+static const struct of_device_id altera_freeze_br_of_match[] = {
+	{ .compatible = "altr,freeze-bridge-controller", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_freeze_br_of_match);
+
+static int altera_freeze_br_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct altera_freeze_br_data *priv;
+	struct resource *res;
+	u32 status, revision;
+
+	if (!np)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base_addr))
+		return PTR_ERR(priv->base_addr);
+
+	status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+	if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)
+		priv->enable = 1;
+
+	revision = readl(priv->base_addr + FREEZE_CSR_REG_VERSION);
+	if (revision != FREEZE_CSR_SUPPORTED_VERSION)
+		dev_warn(dev,
+			 "%s Freeze Controller unexpected revision %d != %d\n",
+			 __func__, revision, FREEZE_CSR_SUPPORTED_VERSION);
+
+	return fpga_bridge_register(dev, FREEZE_BRIDGE_NAME,
+				    &altera_freeze_br_br_ops, priv);
+}
+
+static int altera_freeze_br_remove(struct platform_device *pdev)
+{
+	fpga_bridge_unregister(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver altera_freeze_br_driver = {
+	.probe = altera_freeze_br_probe,
+	.remove = altera_freeze_br_remove,
+	.driver = {
+		.name	= "altera_freeze_br",
+		.of_match_table = of_match_ptr(altera_freeze_br_of_match),
+	},
+};
+
+module_platform_driver(altera_freeze_br_driver);
+
+MODULE_DESCRIPTION("Altera Freeze Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");

drivers/fpga/altera-hps2fpga.c

@@ -0,0 +1,222 @@
+/*
+ * FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * Includes this patch from the mailing list:
+ *   fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters
+ *   Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages bridges on a Altera SOCFPGA between the ARM host
+ * processor system (HPS) and the embedded FPGA.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration.  Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/clk.h>
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define ALT_L3_REMAP_OFST			0x0
+#define ALT_L3_REMAP_MPUZERO_MSK		0x00000001
+#define ALT_L3_REMAP_H2F_MSK			0x00000008
+#define ALT_L3_REMAP_LWH2F_MSK			0x00000010
+
+#define HPS2FPGA_BRIDGE_NAME			"hps2fpga"
+#define LWHPS2FPGA_BRIDGE_NAME			"lwhps2fpga"
+#define FPGA2HPS_BRIDGE_NAME			"fpga2hps"
+
+struct altera_hps2fpga_data {
+	const char *name;
+	struct reset_control *bridge_reset;
+	struct regmap *l3reg;
+	unsigned int remap_mask;
+	struct clk *clk;
+};
+
+static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)
+{
+	struct altera_hps2fpga_data *priv = bridge->priv;
+
+	return reset_control_status(priv->bridge_reset);
+}
+
+/* The L3 REMAP register is write only, so keep a cached value. */
+static unsigned int l3_remap_shadow;
+static spinlock_t l3_remap_lock;
+
+static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
+				    bool enable)
+{
+	unsigned long flags;
+	int ret;
+
+	/* bring bridge out of reset */
+	if (enable)
+		ret = reset_control_deassert(priv->bridge_reset);
+	else
+		ret = reset_control_assert(priv->bridge_reset);
+	if (ret)
+		return ret;
+
+	/* Allow bridge to be visible to L3 masters or not */
+	if (priv->remap_mask) {
+		spin_lock_irqsave(&l3_remap_lock, flags);
+		l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK;
+
+		if (enable)
+			l3_remap_shadow |= priv->remap_mask;
+		else
+			l3_remap_shadow &= ~priv->remap_mask;
+
+		ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST,
+				   l3_remap_shadow);
+		spin_unlock_irqrestore(&l3_remap_lock, flags);
+	}
+
+	return ret;
+}
+
+static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+	return _alt_hps2fpga_enable_set(bridge->priv, enable);
+}
+
+static const struct fpga_bridge_ops altera_hps2fpga_br_ops = {
+	.enable_set = alt_hps2fpga_enable_set,
+	.enable_show = alt_hps2fpga_enable_show,
+};
+
+static struct altera_hps2fpga_data hps2fpga_data  = {
+	.name = HPS2FPGA_BRIDGE_NAME,
+	.remap_mask = ALT_L3_REMAP_H2F_MSK,
+};
+
+static struct altera_hps2fpga_data lwhps2fpga_data  = {
+	.name = LWHPS2FPGA_BRIDGE_NAME,
+	.remap_mask = ALT_L3_REMAP_LWH2F_MSK,
+};
+
+static struct altera_hps2fpga_data fpga2hps_data  = {
+	.name = FPGA2HPS_BRIDGE_NAME,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+	{ .compatible = "altr,socfpga-hps2fpga-bridge",
+	  .data = &hps2fpga_data },
+	{ .compatible = "altr,socfpga-lwhps2fpga-bridge",
+	  .data = &lwhps2fpga_data },
+	{ .compatible = "altr,socfpga-fpga2hps-bridge",
+	  .data = &fpga2hps_data },
+	{},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct altera_hps2fpga_data *priv;
+	const struct of_device_id *of_id;
+	u32 enable;
+	int ret;
+
+	of_id = of_match_device(altera_fpga_of_match, dev);
+	priv = (struct altera_hps2fpga_data *)of_id->data;
+
+	priv->bridge_reset = of_reset_control_get_by_index(dev->of_node, 0);
+	if (IS_ERR(priv->bridge_reset)) {
+		dev_err(dev, "Could not get %s reset control\n", priv->name);
+		return PTR_ERR(priv->bridge_reset);
+	}
+
+	if (priv->remap_mask) {
+		priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs");
+		if (IS_ERR(priv->l3reg)) {
+			dev_err(dev, "regmap for altr,l3regs lookup failed\n");
+			return PTR_ERR(priv->l3reg);
+		}
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "no clock specified\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "could not enable clock\n");
+		return -EBUSY;
+	}
+
+	spin_lock_init(&l3_remap_lock);
+
+	if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+		if (enable > 1) {
+			dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+		} else {
+			dev_info(dev, "%s bridge\n",
+				 (enable ? "enabling" : "disabling"));
+
+			ret = _alt_hps2fpga_enable_set(priv, enable);
+			if (ret) {
+				fpga_bridge_unregister(&pdev->dev);
+				return ret;
+			}
+		}
+	}
+
+	return fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops,
+				    priv);
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+	struct fpga_bridge *bridge = platform_get_drvdata(pdev);
+	struct altera_hps2fpga_data *priv = bridge->priv;
+
+	fpga_bridge_unregister(&pdev->dev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver alt_fpga_bridge_driver = {
+	.probe = alt_fpga_bridge_probe,
+	.remove = alt_fpga_bridge_remove,
+	.driver = {
+		.name	= "altera_hps2fpga_bridge",
+		.of_match_table = of_match_ptr(altera_fpga_of_match),
+	},
+};
+
+module_platform_driver(alt_fpga_bridge_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");

drivers/fpga/fpga-bridge.c

@@ -0,0 +1,395 @@
+/*
+ * FPGA Bridge Framework Driver
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_IDA(fpga_bridge_ida);
+static struct class *fpga_bridge_class;
+
+/* Lock for adding/removing bridges to linked lists*/
+spinlock_t bridge_list_lock;
+
+static int fpga_bridge_of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * fpga_bridge_enable - Enable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_enable(struct fpga_bridge *bridge)
+{
+	dev_dbg(&bridge->dev, "enable\n");
+
+	if (bridge->br_ops && bridge->br_ops->enable_set)
+		return bridge->br_ops->enable_set(bridge, 1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_enable);
+
+/**
+ * fpga_bridge_disable - Disable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_disable(struct fpga_bridge *bridge)
+{
+	dev_dbg(&bridge->dev, "disable\n");
+
+	if (bridge->br_ops && bridge->br_ops->enable_set)
+		return bridge->br_ops->enable_set(bridge, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_disable);
+
+/**
+ * of_fpga_bridge_get - get an exclusive reference to a fpga bridge
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ *
+ * Return fpga_bridge struct if successful.
+ * Return -EBUSY if someone already has a reference to the bridge.
+ * Return -ENODEV if @np is not a FPGA Bridge.
+ */
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *np,
+				       struct fpga_image_info *info)
+
+{
+	struct device *dev;
+	struct fpga_bridge *bridge;
+	int ret = -ENODEV;
+
+	dev = class_find_device(fpga_bridge_class, NULL, np,
+				fpga_bridge_of_node_match);
+	if (!dev)
+		goto err_dev;
+
+	bridge = to_fpga_bridge(dev);
+	if (!bridge)
+		goto err_dev;
+
+	bridge->info = info;
+
+	if (!mutex_trylock(&bridge->mutex)) {
+		ret = -EBUSY;
+		goto err_dev;
+	}
+
+	if (!try_module_get(dev->parent->driver->owner))
+		goto err_ll_mod;
+
+	dev_dbg(&bridge->dev, "get\n");
+
+	return bridge;
+
+err_ll_mod:
+	mutex_unlock(&bridge->mutex);
+err_dev:
+	put_device(dev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(of_fpga_bridge_get);
+
+/**
+ * fpga_bridge_put - release a reference to a bridge
+ *
+ * @bridge: FPGA bridge
+ */
+void fpga_bridge_put(struct fpga_bridge *bridge)
+{
+	dev_dbg(&bridge->dev, "put\n");
+
+	bridge->info = NULL;
+	module_put(bridge->dev.parent->driver->owner);
+	mutex_unlock(&bridge->mutex);
+	put_device(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_put);
+
+/**
+ * fpga_bridges_enable - enable bridges in a list
+ * @bridge_list: list of FPGA bridges
+ *
+ * Enable each bridge in the list.  If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_enable(struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge;
+	struct list_head *node;
+	int ret;
+
+	list_for_each(node, bridge_list) {
+		bridge = list_entry(node, struct fpga_bridge, node);
+		ret = fpga_bridge_enable(bridge);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_enable);
+
+/**
+ * fpga_bridges_disable - disable bridges in a list
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * Disable each bridge in the list.  If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_disable(struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge;
+	struct list_head *node;
+	int ret;
+
+	list_for_each(node, bridge_list) {
+		bridge = list_entry(node, struct fpga_bridge, node);
+		ret = fpga_bridge_disable(bridge);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_disable);
+
+/**
+ * fpga_bridges_put - put bridges
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * For each bridge in the list, put the bridge and remove it from the list.
+ * If list is empty, do nothing.
+ */
+void fpga_bridges_put(struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge;
+	struct list_head *node, *next;
+	unsigned long flags;
+
+	list_for_each_safe(node, next, bridge_list) {
+		bridge = list_entry(node, struct fpga_bridge, node);
+
+		fpga_bridge_put(bridge);
+
+		spin_lock_irqsave(&bridge_list_lock, flags);
+		list_del(&bridge->node);
+		spin_unlock_irqrestore(&bridge_list_lock, flags);
+	}
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_put);
+
+/**
+ * fpga_bridges_get_to_list - get a bridge, add it to a list
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ * @bridge_list: list of FPGA bridges
+ *
+ * Get an exclusive reference to the bridge and and it to the list.
+ *
+ * Return 0 for success, error code from of_fpga_bridge_get() othewise.
+ */
+int fpga_bridge_get_to_list(struct device_node *np,
+			    struct fpga_image_info *info,
+			    struct list_head *bridge_list)
+{
+	struct fpga_bridge *bridge;
+	unsigned long flags;
+
+	bridge = of_fpga_bridge_get(np, info);
+	if (IS_ERR(bridge))
+		return PTR_ERR(bridge);
+
+	spin_lock_irqsave(&bridge_list_lock, flags);
+	list_add(&bridge->node, bridge_list);
+	spin_unlock_irqrestore(&bridge_list_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_get_to_list);
+
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+	return sprintf(buf, "%s\n", bridge->name);
+}
+
+static ssize_t state_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct fpga_bridge *bridge = to_fpga_bridge(dev);
+	int enable = 1;
+
+	if (bridge->br_ops && bridge->br_ops->enable_show)
+		enable = bridge->br_ops->enable_show(bridge);
+
+	return sprintf(buf, "%s\n", enable ? "enabled" : "disabled");
+}
+
+static DEVICE_ATTR_RO(name);
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *fpga_bridge_attrs[] = {
+	&dev_attr_name.attr,
+	&dev_attr_state.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(fpga_bridge);
+
+/**
+ * fpga_bridge_register - register a fpga bridge driver
+ * @dev:	FPGA bridge device from pdev
+ * @name:	FPGA bridge name
+ * @br_ops:	pointer to structure of fpga bridge ops
+ * @priv:	FPGA bridge private data
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_register(struct device *dev, const char *name,
+			 const struct fpga_bridge_ops *br_ops, void *priv)
+{
+	struct fpga_bridge *bridge;
+	int id, ret = 0;
+
+	if (!name || !strlen(name)) {
+		dev_err(dev, "Attempt to register with no name!\n");
+		return -EINVAL;
+	}
+
+	bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
+	if (!bridge)
+		return -ENOMEM;
+
+	id = ida_simple_get(&fpga_bridge_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		ret = id;
+		goto error_kfree;
+	}
+
+	mutex_init(&bridge->mutex);
+	INIT_LIST_HEAD(&bridge->node);
+
+	bridge->name = name;
+	bridge->br_ops = br_ops;
+	bridge->priv = priv;
+
+	device_initialize(&bridge->dev);
+	bridge->dev.class = fpga_bridge_class;
+	bridge->dev.parent = dev;
+	bridge->dev.of_node = dev->of_node;
+	bridge->dev.id = id;
+	dev_set_drvdata(dev, bridge);
+
+	ret = dev_set_name(&bridge->dev, "br%d", id);
+	if (ret)
+		goto error_device;
+
+	ret = device_add(&bridge->dev);
+	if (ret)
+		goto error_device;
+
+	of_platform_populate(dev->of_node, NULL, NULL, dev);
+
+	dev_info(bridge->dev.parent, "fpga bridge [%s] registered\n",
+		 bridge->name);
+
+	return 0;
+
+error_device:
+	ida_simple_remove(&fpga_bridge_ida, id);
+error_kfree:
+	kfree(bridge);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_register);
+
+/**
+ * fpga_bridge_unregister - unregister a fpga bridge driver
+ * @dev: FPGA bridge device from pdev
+ */
+void fpga_bridge_unregister(struct device *dev)
+{
+	struct fpga_bridge *bridge = dev_get_drvdata(dev);
+
+	/*
+	 * If the low level driver provides a method for putting bridge into
+	 * a desired state upon unregister, do it.
+	 */
+	if (bridge->br_ops && bridge->br_ops->fpga_bridge_remove)
+		bridge->br_ops->fpga_bridge_remove(bridge);
+
+	device_unregister(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_unregister);
+
+static void fpga_bridge_dev_release(struct device *dev)
+{
+	struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+	ida_simple_remove(&fpga_bridge_ida, bridge->dev.id);
+	kfree(bridge);
+}
+
+static int __init fpga_bridge_dev_init(void)
+{
+	spin_lock_init(&bridge_list_lock);
+
+	fpga_bridge_class = class_create(THIS_MODULE, "fpga_bridge");
+	if (IS_ERR(fpga_bridge_class))
+		return PTR_ERR(fpga_bridge_class);
+
+	fpga_bridge_class->dev_groups = fpga_bridge_groups;
+	fpga_bridge_class->dev_release = fpga_bridge_dev_release;
+
+	return 0;
+}
+
+static void __exit fpga_bridge_dev_exit(void)
+{
+	class_destroy(fpga_bridge_class);
+	ida_destroy(&fpga_bridge_ida);
+}
+
+MODULE_DESCRIPTION("FPGA Bridge Driver");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
+
+subsys_initcall(fpga_bridge_dev_init);
+module_exit(fpga_bridge_dev_exit);

drivers/fpga/fpga-mgr.c

@@ -32,19 +32,20 @@ static struct class *fpga_mgr_class;
 /**
  * fpga_mgr_buf_load - load fpga from image in buffer
  * @mgr:	fpga manager
- * @flags:	flags setting fpga confuration modes
+ * @info:	fpga image specific information
  * @buf:	buffer contain fpga image
  * @count:	byte count of buf
  *
  * Step the low level fpga manager through the device-specific steps of getting
  * an FPGA ready to be configured, writing the image to it, then doing whatever
  * post-configuration steps necessary.  This code assumes the caller got the
- * mgr pointer from of_fpga_mgr_get() and checked that it is not an error code.
+ * mgr pointer from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is
+ * not an error code.
  *
  * Return: 0 on success, negative error code otherwise.
  */
-int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
-		      size_t count)
+int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
+		      const char *buf, size_t count)
 {
 	struct device *dev = &mgr->dev;
 	int ret;
@@ -52,10 +53,12 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
 	/*
 	 * Call the low level driver's write_init function.  This will do the
 	 * device-specific things to get the FPGA into the state where it is
-	 * ready to receive an FPGA image.
+	 * ready to receive an FPGA image. The low level driver only gets to
+	 * see the first initial_header_size bytes in the buffer.
 	 */
 	mgr->state = FPGA_MGR_STATE_WRITE_INIT;
-	ret = mgr->mops->write_init(mgr, flags, buf, count);
+	ret = mgr->mops->write_init(mgr, info, buf,
+				    min(mgr->mops->initial_header_size, count));
 	if (ret) {
 		dev_err(dev, "Error preparing FPGA for writing\n");
 		mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR;
@@ -78,7 +81,7 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
 	 * steps to finish and set the FPGA into operating mode.
 	 */
 	mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE;
-	ret = mgr->mops->write_complete(mgr, flags);
+	ret = mgr->mops->write_complete(mgr, info);
 	if (ret) {
 		dev_err(dev, "Error after writing image data to FPGA\n");
 		mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
@@ -93,17 +96,19 @@ EXPORT_SYMBOL_GPL(fpga_mgr_buf_load);
 /**
  * fpga_mgr_firmware_load - request firmware and load to fpga
  * @mgr:	fpga manager
- * @flags:	flags setting fpga confuration modes
+ * @info:	fpga image specific information
  * @image_name:	name of image file on the firmware search path
  *
  * Request an FPGA image using the firmware class, then write out to the FPGA.
  * Update the state before each step to provide info on what step failed if
  * there is a failure.  This code assumes the caller got the mgr pointer
- * from of_fpga_mgr_get() and checked that it is not an error code.
+ * from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is not an error
+ * code.
  *
  * Return: 0 on success, negative error code otherwise.
  */
-int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+			   struct fpga_image_info *info,
 			   const char *image_name)
 {
 	struct device *dev = &mgr->dev;
@@ -121,7 +126,7 @@ int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
 		return ret;
 	}
 
-	ret = fpga_mgr_buf_load(mgr, flags, fw->data, fw->size);
+	ret = fpga_mgr_buf_load(mgr, info, fw->data, fw->size);
 
 	release_firmware(fw);
 
@@ -181,30 +186,11 @@ static struct attribute *fpga_mgr_attrs[] = {
 };
 ATTRIBUTE_GROUPS(fpga_mgr);
 
-static int fpga_mgr_of_node_match(struct device *dev, const void *data)
-{
-	return dev->of_node == data;
-}
-
-/**
- * of_fpga_mgr_get - get an exclusive reference to a fpga mgr
- * @node:	device node
- *
- * Given a device node, get an exclusive reference to a fpga mgr.
- *
- * Return: fpga manager struct or IS_ERR() condition containing error code.
- */
-struct fpga_manager *of_fpga_mgr_get(struct device_node *node)
+struct fpga_manager *__fpga_mgr_get(struct device *dev)
 {
 	struct fpga_manager *mgr;
-	struct device *dev;
 	int ret = -ENODEV;
 
-	dev = class_find_device(fpga_mgr_class, NULL, node,
-				fpga_mgr_of_node_match);
-	if (!dev)
-		return ERR_PTR(-ENODEV);
-
 	mgr = to_fpga_manager(dev);
 	if (!mgr)
 		goto err_dev;
@@ -226,6 +212,55 @@ err_dev:
 	put_device(dev);
 	return ERR_PTR(ret);
 }
+
+static int fpga_mgr_dev_match(struct device *dev, const void *data)
+{
+	return dev->parent == data;
+}
+
+/**
+ * fpga_mgr_get - get an exclusive reference to a fpga mgr
+ * @dev:	parent device that fpga mgr was registered with
+ *
+ * Given a device, get an exclusive reference to a fpga mgr.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+struct fpga_manager *fpga_mgr_get(struct device *dev)
+{
+	struct device *mgr_dev = class_find_device(fpga_mgr_class, NULL, dev,
+						   fpga_mgr_dev_match);
+	if (!mgr_dev)
+		return ERR_PTR(-ENODEV);
+
+	return __fpga_mgr_get(mgr_dev);
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_get);
+
+static int fpga_mgr_of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * of_fpga_mgr_get - get an exclusive reference to a fpga mgr
+ * @node:	device node
+ *
+ * Given a device node, get an exclusive reference to a fpga mgr.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+struct fpga_manager *of_fpga_mgr_get(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = class_find_device(fpga_mgr_class, NULL, node,
+				fpga_mgr_of_node_match);
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	return __fpga_mgr_get(dev);
+}
 EXPORT_SYMBOL_GPL(of_fpga_mgr_get);
 
 /**

drivers/fpga/fpga-region.c

@@ -0,0 +1,603 @@
+/*
+ * FPGA Region - Device Tree support for FPGA programming under Linux
+ *
+ *  Copyright (C) 2013-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct fpga_region - FPGA Region structure
+ * @dev: FPGA Region device
+ * @mutex: enforces exclusive reference to region
+ * @bridge_list: list of FPGA bridges specified in region
+ * @info: fpga image specific information
+ */
+struct fpga_region {
+	struct device dev;
+	struct mutex mutex; /* for exclusive reference to region */
+	struct list_head bridge_list;
+	struct fpga_image_info *info;
+};
+
+#define to_fpga_region(d) container_of(d, struct fpga_region, dev)
+
+static DEFINE_IDA(fpga_region_ida);
+static struct class *fpga_region_class;
+
+static const struct of_device_id fpga_region_of_match[] = {
+	{ .compatible = "fpga-region", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, fpga_region_of_match);
+
+static int fpga_region_of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * fpga_region_find - find FPGA region
+ * @np: device node of FPGA Region
+ * Caller will need to put_device(&region->dev) when done.
+ * Returns FPGA Region struct or NULL
+ */
+static struct fpga_region *fpga_region_find(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device(fpga_region_class, NULL, np,
+				fpga_region_of_node_match);
+	if (!dev)
+		return NULL;
+
+	return to_fpga_region(dev);
+}
+
+/**
+ * fpga_region_get - get an exclusive reference to a fpga region
+ * @region: FPGA Region struct
+ *
+ * Caller should call fpga_region_put() when done with region.
+ *
+ * Return fpga_region struct if successful.
+ * Return -EBUSY if someone already has a reference to the region.
+ * Return -ENODEV if @np is not a FPGA Region.
+ */
+static struct fpga_region *fpga_region_get(struct fpga_region *region)
+{
+	struct device *dev = &region->dev;
+
+	if (!mutex_trylock(&region->mutex)) {
+		dev_dbg(dev, "%s: FPGA Region already in use\n", __func__);
+		return ERR_PTR(-EBUSY);
+	}
+
+	get_device(dev);
+	of_node_get(dev->of_node);
+	if (!try_module_get(dev->parent->driver->owner)) {
+		of_node_put(dev->of_node);
+		put_device(dev);
+		mutex_unlock(&region->mutex);
+		return ERR_PTR(-ENODEV);
+	}
+
+	dev_dbg(&region->dev, "get\n");
+
+	return region;
+}
+
+/**
+ * fpga_region_put - release a reference to a region
+ *
+ * @region: FPGA region
+ */
+static void fpga_region_put(struct fpga_region *region)
+{
+	struct device *dev = &region->dev;
+
+	dev_dbg(&region->dev, "put\n");
+
+	module_put(dev->parent->driver->owner);
+	of_node_put(dev->of_node);
+	put_device(dev);
+	mutex_unlock(&region->mutex);
+}
+
+/**
+ * fpga_region_get_manager - get exclusive reference for FPGA manager
+ * @region: FPGA region
+ *
+ * Get FPGA Manager from "fpga-mgr" property or from ancestor region.
+ *
+ * Caller should call fpga_mgr_put() when done with manager.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+static struct fpga_manager *fpga_region_get_manager(struct fpga_region *region)
+{
+	struct device *dev = &region->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node  *mgr_node;
+	struct fpga_manager *mgr;
+
+	of_node_get(np);
+	while (np) {
+		if (of_device_is_compatible(np, "fpga-region")) {
+			mgr_node = of_parse_phandle(np, "fpga-mgr", 0);
+			if (mgr_node) {
+				mgr = of_fpga_mgr_get(mgr_node);
+				of_node_put(np);
+				return mgr;
+			}
+		}
+		np = of_get_next_parent(np);
+	}
+	of_node_put(np);
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * fpga_region_get_bridges - create a list of bridges
+ * @region: FPGA region
+ * @overlay: device node of the overlay
+ *
+ * Create a list of bridges including the parent bridge and the bridges
+ * specified by "fpga-bridges" property.  Note that the
+ * fpga_bridges_enable/disable/put functions are all fine with an empty list
+ * if that happens.
+ *
+ * Caller should call fpga_bridges_put(&region->bridge_list) when
+ * done with the bridges.
+ *
+ * Return 0 for success (even if there are no bridges specified)
+ * or -EBUSY if any of the bridges are in use.
+ */
+static int fpga_region_get_bridges(struct fpga_region *region,
+				   struct device_node *overlay)
+{
+	struct device *dev = &region->dev;
+	struct device_node *region_np = dev->of_node;
+	struct device_node *br, *np, *parent_br = NULL;
+	int i, ret;
+
+	/* If parent is a bridge, add to list */
+	ret = fpga_bridge_get_to_list(region_np->parent, region->info,
+				      &region->bridge_list);
+	if (ret == -EBUSY)
+		return ret;
+
+	if (!ret)
+		parent_br = region_np->parent;
+
+	/* If overlay has a list of bridges, use it. */
+	if (of_parse_phandle(overlay, "fpga-bridges", 0))
+		np = overlay;
+	else
+		np = region_np;
+
+	for (i = 0; ; i++) {
+		br = of_parse_phandle(np, "fpga-bridges", i);
+		if (!br)
+			break;
+
+		/* If parent bridge is in list, skip it. */
+		if (br == parent_br)
+			continue;
+
+		/* If node is a bridge, get it and add to list */
+		ret = fpga_bridge_get_to_list(br, region->info,
+					      &region->bridge_list);
+
+		/* If any of the bridges are in use, give up */
+		if (ret == -EBUSY) {
+			fpga_bridges_put(&region->bridge_list);
+			return -EBUSY;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * fpga_region_program_fpga - program FPGA
+ * @region: FPGA region
+ * @firmware_name: name of FPGA image firmware file
+ * @overlay: device node of the overlay
+ * Program an FPGA using information in the device tree.
+ * Function assumes that there is a firmware-name property.
+ * Return 0 for success or negative error code.
+ */
+static int fpga_region_program_fpga(struct fpga_region *region,
+				    const char *firmware_name,
+				    struct device_node *overlay)
+{
+	struct fpga_manager *mgr;
+	int ret;
+
+	region = fpga_region_get(region);
+	if (IS_ERR(region)) {
+		pr_err("failed to get fpga region\n");
+		return PTR_ERR(region);
+	}
+
+	mgr = fpga_region_get_manager(region);
+	if (IS_ERR(mgr)) {
+		pr_err("failed to get fpga region manager\n");
+		return PTR_ERR(mgr);
+	}
+
+	ret = fpga_region_get_bridges(region, overlay);
+	if (ret) {
+		pr_err("failed to get fpga region bridges\n");
+		goto err_put_mgr;
+	}
+
+	ret = fpga_bridges_disable(&region->bridge_list);
+	if (ret) {
+		pr_err("failed to disable region bridges\n");
+		goto err_put_br;
+	}
+
+	ret = fpga_mgr_firmware_load(mgr, region->info, firmware_name);
+	if (ret) {
+		pr_err("failed to load fpga image\n");
+		goto err_put_br;
+	}
+
+	ret = fpga_bridges_enable(&region->bridge_list);
+	if (ret) {
+		pr_err("failed to enable region bridges\n");
+		goto err_put_br;
+	}
+
+	fpga_mgr_put(mgr);
+	fpga_region_put(region);
+
+	return 0;
+
+err_put_br:
+	fpga_bridges_put(&region->bridge_list);
+err_put_mgr:
+	fpga_mgr_put(mgr);
+	fpga_region_put(region);
+
+	return ret;
+}
+
+/**
+ * child_regions_with_firmware
+ * @overlay: device node of the overlay
+ *
+ * If the overlay adds child FPGA regions, they are not allowed to have
+ * firmware-name property.
+ *
+ * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name.
+ */
+static int child_regions_with_firmware(struct device_node *overlay)
+{
+	struct device_node *child_region;
+	const char *child_firmware_name;
+	int ret = 0;
+
+	of_node_get(overlay);
+
+	child_region = of_find_matching_node(overlay, fpga_region_of_match);
+	while (child_region) {
+		if (!of_property_read_string(child_region, "firmware-name",
+					     &child_firmware_name)) {
+			ret = -EINVAL;
+			break;
+		}
+		child_region = of_find_matching_node(child_region,
+						     fpga_region_of_match);
+	}
+
+	of_node_put(child_region);
+
+	if (ret)
+		pr_err("firmware-name not allowed in child FPGA region: %s",
+		       child_region->full_name);
+
+	return ret;
+}
+
+/**
+ * fpga_region_notify_pre_apply - pre-apply overlay notification
+ *
+ * @region: FPGA region that the overlay was applied to
+ * @nd: overlay notification data
+ *
+ * Called after when an overlay targeted to a FPGA Region is about to be
+ * applied.  Function will check the properties that will be added to the FPGA
+ * region.  If the checks pass, it will program the FPGA.
+ *
+ * The checks are:
+ * The overlay must add either firmware-name or external-fpga-config property
+ * to the FPGA Region.
+ *
+ *   firmware-name        : program the FPGA
+ *   external-fpga-config : FPGA is already programmed
+ *
+ * The overlay can add other FPGA regions, but child FPGA regions cannot have a
+ * firmware-name property since those regions don't exist yet.
+ *
+ * If the overlay that breaks the rules, notifier returns an error and the
+ * overlay is rejected before it goes into the main tree.
+ *
+ * Returns 0 for success or negative error code for failure.
+ */
+static int fpga_region_notify_pre_apply(struct fpga_region *region,
+					struct of_overlay_notify_data *nd)
+{
+	const char *firmware_name = NULL;
+	struct fpga_image_info *info;
+	int ret;
+
+	info = devm_kzalloc(&region->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	region->info = info;
+
+	/* Reject overlay if child FPGA Regions have firmware-name property */
+	ret = child_regions_with_firmware(nd->overlay);
+	if (ret)
+		return ret;
+
+	/* Read FPGA region properties from the overlay */
+	if (of_property_read_bool(nd->overlay, "partial-fpga-config"))
+		info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
+
+	if (of_property_read_bool(nd->overlay, "external-fpga-config"))
+		info->flags |= FPGA_MGR_EXTERNAL_CONFIG;
+
+	of_property_read_string(nd->overlay, "firmware-name", &firmware_name);
+
+	of_property_read_u32(nd->overlay, "region-unfreeze-timeout-us",
+			     &info->enable_timeout_us);
+
+	of_property_read_u32(nd->overlay, "region-freeze-timeout-us",
+			     &info->disable_timeout_us);
+
+	/* If FPGA was externally programmed, don't specify firmware */
+	if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) {
+		pr_err("error: specified firmware and external-fpga-config");
+		return -EINVAL;
+	}
+
+	/* FPGA is already configured externally.  We're done. */
+	if (info->flags & FPGA_MGR_EXTERNAL_CONFIG)
+		return 0;
+
+	/* If we got this far, we should be programming the FPGA */
+	if (!firmware_name) {
+		pr_err("should specify firmware-name or external-fpga-config\n");
+		return -EINVAL;
+	}
+
+	return fpga_region_program_fpga(region, firmware_name, nd->overlay);
+}
+
+/**
+ * fpga_region_notify_post_remove - post-remove overlay notification
+ *
+ * @region: FPGA region that was targeted by the overlay that was removed
+ * @nd: overlay notification data
+ *
+ * Called after an overlay has been removed if the overlay's target was a
+ * FPGA region.
+ */
+static void fpga_region_notify_post_remove(struct fpga_region *region,
+					   struct of_overlay_notify_data *nd)
+{
+	fpga_bridges_disable(&region->bridge_list);
+	fpga_bridges_put(&region->bridge_list);
+	devm_kfree(&region->dev, region->info);
+	region->info = NULL;
+}
+
+/**
+ * of_fpga_region_notify - reconfig notifier for dynamic DT changes
+ * @nb:		notifier block
+ * @action:	notifier action
+ * @arg:	reconfig data
+ *
+ * This notifier handles programming a FPGA when a "firmware-name" property is
+ * added to a fpga-region.
+ *
+ * Returns NOTIFY_OK or error if FPGA programming fails.
+ */
+static int of_fpga_region_notify(struct notifier_block *nb,
+				 unsigned long action, void *arg)
+{
+	struct of_overlay_notify_data *nd = arg;
+	struct fpga_region *region;
+	int ret;
+
+	switch (action) {
+	case OF_OVERLAY_PRE_APPLY:
+		pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__);
+		break;
+	case OF_OVERLAY_POST_APPLY:
+		pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__);
+		return NOTIFY_OK;       /* not for us */
+	case OF_OVERLAY_PRE_REMOVE:
+		pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__);
+		return NOTIFY_OK;       /* not for us */
+	case OF_OVERLAY_POST_REMOVE:
+		pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__);
+		break;
+	default:			/* should not happen */
+		return NOTIFY_OK;
+	}
+
+	region = fpga_region_find(nd->target);
+	if (!region)
+		return NOTIFY_OK;
+
+	ret = 0;
+	switch (action) {
+	case OF_OVERLAY_PRE_APPLY:
+		ret = fpga_region_notify_pre_apply(region, nd);
+		break;
+
+	case OF_OVERLAY_POST_REMOVE:
+		fpga_region_notify_post_remove(region, nd);
+		break;
+	}
+
+	put_device(&region->dev);
+
+	if (ret)
+		return notifier_from_errno(ret);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block fpga_region_of_nb = {
+	.notifier_call = of_fpga_region_notify,
+};
+
+static int fpga_region_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct fpga_region *region;
+	int id, ret = 0;
+
+	region = kzalloc(sizeof(*region), GFP_KERNEL);
+	if (!region)
+		return -ENOMEM;
+
+	id = ida_simple_get(&fpga_region_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		ret = id;
+		goto err_kfree;
+	}
+
+	mutex_init(&region->mutex);
+	INIT_LIST_HEAD(&region->bridge_list);
+
+	device_initialize(&region->dev);
+	region->dev.class = fpga_region_class;
+	region->dev.parent = dev;
+	region->dev.of_node = np;
+	region->dev.id = id;
+	dev_set_drvdata(dev, region);
+
+	ret = dev_set_name(&region->dev, "region%d", id);
+	if (ret)
+		goto err_remove;
+
+	ret = device_add(&region->dev);
+	if (ret)
+		goto err_remove;
+
+	of_platform_populate(np, fpga_region_of_match, NULL, &region->dev);
+
+	dev_info(dev, "FPGA Region probed\n");
+
+	return 0;
+
+err_remove:
+	ida_simple_remove(&fpga_region_ida, id);
+err_kfree:
+	kfree(region);
+
+	return ret;
+}
+
+static int fpga_region_remove(struct platform_device *pdev)
+{
+	struct fpga_region *region = platform_get_drvdata(pdev);
+
+	device_unregister(&region->dev);
+
+	return 0;
+}
+
+static struct platform_driver fpga_region_driver = {
+	.probe = fpga_region_probe,
+	.remove = fpga_region_remove,
+	.driver = {
+		.name	= "fpga-region",
+		.of_match_table = of_match_ptr(fpga_region_of_match),
+	},
+};
+
+static void fpga_region_dev_release(struct device *dev)
+{
+	struct fpga_region *region = to_fpga_region(dev);
+
+	ida_simple_remove(&fpga_region_ida, region->dev.id);
+	kfree(region);
+}
+
+/**
+ * fpga_region_init - init function for fpga_region class
+ * Creates the fpga_region class and registers a reconfig notifier.
+ */
+static int __init fpga_region_init(void)
+{
+	int ret;
+
+	fpga_region_class = class_create(THIS_MODULE, "fpga_region");
+	if (IS_ERR(fpga_region_class))
+		return PTR_ERR(fpga_region_class);
+
+	fpga_region_class->dev_release = fpga_region_dev_release;
+
+	ret = of_overlay_notifier_register(&fpga_region_of_nb);
+	if (ret)
+		goto err_class;
+
+	ret = platform_driver_register(&fpga_region_driver);
+	if (ret)
+		goto err_plat;
+
+	return 0;
+
+err_plat:
+	of_overlay_notifier_unregister(&fpga_region_of_nb);
+err_class:
+	class_destroy(fpga_region_class);
+	ida_destroy(&fpga_region_ida);
+	return ret;
+}
+
+static void __exit fpga_region_exit(void)
+{
+	platform_driver_unregister(&fpga_region_driver);
+	of_overlay_notifier_unregister(&fpga_region_of_nb);
+	class_destroy(fpga_region_class);
+	ida_destroy(&fpga_region_ida);
+}
+
+subsys_initcall(fpga_region_init);
+module_exit(fpga_region_exit);
+
+MODULE_DESCRIPTION("FPGA Region");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");

drivers/fpga/socfpga-a10.c

@@ -0,0 +1,557 @@
+/*
+ * FPGA Manager Driver for Altera Arria10 SoCFPGA
+ *
+ * Copyright (C) 2015-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#define A10_FPGAMGR_DCLKCNT_OFST				0x08
+#define A10_FPGAMGR_DCLKSTAT_OFST				0x0c
+#define A10_FPGAMGR_IMGCFG_CTL_00_OFST				0x70
+#define A10_FPGAMGR_IMGCFG_CTL_01_OFST				0x74
+#define A10_FPGAMGR_IMGCFG_CTL_02_OFST				0x78
+#define A10_FPGAMGR_IMGCFG_STAT_OFST				0x80
+
+#define A10_FPGAMGR_DCLKSTAT_DCLKDONE				BIT(0)
+
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG		BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS		BIT(1)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE		BIT(2)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG			BIT(8)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE		BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE		BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG		BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST		BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE			BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL			BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK		(BIT(16) | BIT(17))
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT			16
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH			BIT(24)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT		24
+
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR			BIT(0)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE		BIT(1)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE			BIT(2)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN			BIT(4)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN			BIT(6)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY			BIT(9)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE			BIT(10)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR			BIT(11)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN			BIT(12)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK	(BIT(16) | BIT(17) | BIT(18))
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT		        16
+
+/* FPGA CD Ratio Value */
+#define CDRATIO_x1						0x0
+#define CDRATIO_x2						0x1
+#define CDRATIO_x4						0x2
+#define CDRATIO_x8						0x3
+
+/* Configuration width 16/32 bit */
+#define CFGWDTH_32						1
+#define CFGWDTH_16						0
+
+/*
+ * struct a10_fpga_priv - private data for fpga manager
+ * @regmap: regmap for register access
+ * @fpga_data_addr: iomap for single address data register to FPGA
+ * @clk: clock
+ */
+struct a10_fpga_priv {
+	struct regmap *regmap;
+	void __iomem *fpga_data_addr;
+	struct clk *clk;
+};
+
+static bool socfpga_a10_fpga_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case A10_FPGAMGR_DCLKCNT_OFST:
+	case A10_FPGAMGR_DCLKSTAT_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+		return true;
+	}
+	return false;
+}
+
+static bool socfpga_a10_fpga_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case A10_FPGAMGR_DCLKCNT_OFST:
+	case A10_FPGAMGR_DCLKSTAT_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+	case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+	case A10_FPGAMGR_IMGCFG_STAT_OFST:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config socfpga_a10_fpga_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.writeable_reg = socfpga_a10_fpga_writeable_reg,
+	.readable_reg = socfpga_a10_fpga_readable_reg,
+	.max_register = A10_FPGAMGR_IMGCFG_STAT_OFST,
+	.cache_type = REGCACHE_NONE,
+};
+
+/*
+ * from the register map description of cdratio in imgcfg_ctrl_02:
+ *  Normal Configuration    : 32bit Passive Parallel
+ *  Partial Reconfiguration : 16bit Passive Parallel
+ */
+static void socfpga_a10_fpga_set_cfg_width(struct a10_fpga_priv *priv,
+					   int width)
+{
+	width <<= A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT;
+
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH, width);
+}
+
+static void socfpga_a10_fpga_generate_dclks(struct a10_fpga_priv *priv,
+					    u32 count)
+{
+	u32 val;
+
+	/* Clear any existing DONE status. */
+	regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+		     A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+
+	/* Issue the DCLK regmap. */
+	regmap_write(priv->regmap, A10_FPGAMGR_DCLKCNT_OFST, count);
+
+	/* wait till the dclkcnt done */
+	regmap_read_poll_timeout(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST, val,
+				 val, 1, 100);
+
+	/* Clear DONE status. */
+	regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+		     A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+}
+
+#define RBF_ENCRYPTION_MODE_OFFSET		69
+#define RBF_DECOMPRESS_OFFSET			229
+
+static int socfpga_a10_fpga_encrypted(u32 *buf32, size_t buf32_size)
+{
+	if (buf32_size < RBF_ENCRYPTION_MODE_OFFSET + 1)
+		return -EINVAL;
+
+	/* Is the bitstream encrypted? */
+	return ((buf32[RBF_ENCRYPTION_MODE_OFFSET] >> 2) & 3) != 0;
+}
+
+static int socfpga_a10_fpga_compressed(u32 *buf32, size_t buf32_size)
+{
+	if (buf32_size < RBF_DECOMPRESS_OFFSET + 1)
+		return -EINVAL;
+
+	/* Is the bitstream compressed? */
+	return !((buf32[RBF_DECOMPRESS_OFFSET] >> 1) & 1);
+}
+
+static unsigned int socfpga_a10_fpga_get_cd_ratio(unsigned int cfg_width,
+						  bool encrypt, bool compress)
+{
+	unsigned int cd_ratio;
+
+	/*
+	 * cd ratio is dependent on cfg width and whether the bitstream
+	 * is encrypted and/or compressed.
+	 *
+	 * | width | encr. | compr. | cd ratio |
+	 * |  16   |   0   |   0    |     1    |
+	 * |  16   |   0   |   1    |     4    |
+	 * |  16   |   1   |   0    |     2    |
+	 * |  16   |   1   |   1    |     4    |
+	 * |  32   |   0   |   0    |     1    |
+	 * |  32   |   0   |   1    |     8    |
+	 * |  32   |   1   |   0    |     4    |
+	 * |  32   |   1   |   1    |     8    |
+	 */
+	if (!compress && !encrypt)
+		return CDRATIO_x1;
+
+	if (compress)
+		cd_ratio = CDRATIO_x4;
+	else
+		cd_ratio = CDRATIO_x2;
+
+	/* If 32 bit, double the cd ratio by incrementing the field  */
+	if (cfg_width == CFGWDTH_32)
+		cd_ratio += 1;
+
+	return cd_ratio;
+}
+
+static int socfpga_a10_fpga_set_cdratio(struct fpga_manager *mgr,
+					unsigned int cfg_width,
+					const char *buf, size_t count)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	unsigned int cd_ratio;
+	int encrypt, compress;
+
+	encrypt = socfpga_a10_fpga_encrypted((u32 *)buf, count / 4);
+	if (encrypt < 0)
+		return -EINVAL;
+
+	compress = socfpga_a10_fpga_compressed((u32 *)buf, count / 4);
+	if (compress < 0)
+		return -EINVAL;
+
+	cd_ratio = socfpga_a10_fpga_get_cd_ratio(cfg_width, encrypt, compress);
+
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK,
+			   cd_ratio << A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT);
+
+	return 0;
+}
+
+static u32 socfpga_a10_fpga_read_stat(struct a10_fpga_priv *priv)
+{
+	u32 val;
+
+	regmap_read(priv->regmap, A10_FPGAMGR_IMGCFG_STAT_OFST, &val);
+
+	return val;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_ready(struct a10_fpga_priv *priv)
+{
+	u32 reg, i;
+
+	for (i = 0; i < 10 ; i++) {
+		reg = socfpga_a10_fpga_read_stat(priv);
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+			return -EINVAL;
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_done(struct a10_fpga_priv *priv)
+{
+	u32 reg, i;
+
+	for (i = 0; i < 10 ; i++) {
+		reg = socfpga_a10_fpga_read_stat(priv);
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+			return -EINVAL;
+
+		if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+/* Start the FPGA programming by initialize the FPGA Manager */
+static int socfpga_a10_fpga_write_init(struct fpga_manager *mgr,
+				       struct fpga_image_info *info,
+				       const char *buf, size_t count)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	unsigned int cfg_width;
+	u32 msel, stat, mask;
+	int ret;
+
+	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG)
+		cfg_width = CFGWDTH_16;
+	else
+		return -EINVAL;
+
+	/* Check for passive parallel (msel == 000 or 001) */
+	msel = socfpga_a10_fpga_read_stat(priv);
+	msel &= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK;
+	msel >>= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT;
+	if ((msel != 0) && (msel != 1)) {
+		dev_dbg(&mgr->dev, "Fail: invalid msel=%d\n", msel);
+		return -EINVAL;
+	}
+
+	/* Make sure no external devices are interfering */
+	stat = socfpga_a10_fpga_read_stat(priv);
+	mask = A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN |
+	       A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN;
+	if ((stat & mask) != mask)
+		return -EINVAL;
+
+	/* Set cfg width */
+	socfpga_a10_fpga_set_cfg_width(priv, cfg_width);
+
+	/* Determine cd ratio from bitstream header and set cd ratio */
+	ret = socfpga_a10_fpga_set_cdratio(mgr, cfg_width, buf, count);
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear s2f_nce to enable chip select.  Leave pr_request
+	 * unasserted and override disabled.
+	 */
+	regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+		     A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+	/* Set cfg_ctrl to enable s2f dclk and data */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL,
+			   A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL);
+
+	/*
+	 * Disable overrides not needed for pr.
+	 * s2f_config==1 leaves reset deasseted.
+	 */
+	regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_00_OFST,
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG |
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS |
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE |
+		     A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG);
+
+	/* Enable override for data, dclk, nce, and pr_request to CSS */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG, 0);
+
+	/* Send some clocks to clear out any errors */
+	socfpga_a10_fpga_generate_dclks(priv, 256);
+
+	/* Assert pr_request */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST);
+
+	/* Provide 2048 DCLKs before starting the config data streaming. */
+	socfpga_a10_fpga_generate_dclks(priv, 0x7ff);
+
+	/* Wait for pr_ready */
+	return socfpga_a10_fpga_wait_for_pr_ready(priv);
+}
+
+/*
+ * write data to the FPGA data register
+ */
+static int socfpga_a10_fpga_write(struct fpga_manager *mgr, const char *buf,
+				  size_t count)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	u32 *buffer_32 = (u32 *)buf;
+	size_t i = 0;
+
+	if (count <= 0)
+		return -EINVAL;
+
+	/* Write out the complete 32-bit chunks */
+	while (count >= sizeof(u32)) {
+		writel(buffer_32[i++], priv->fpga_data_addr);
+		count -= sizeof(u32);
+	}
+
+	/* Write out remaining non 32-bit chunks */
+	switch (count) {
+	case 3:
+		writel(buffer_32[i++] & 0x00ffffff, priv->fpga_data_addr);
+		break;
+	case 2:
+		writel(buffer_32[i++] & 0x0000ffff, priv->fpga_data_addr);
+		break;
+	case 1:
+		writel(buffer_32[i++] & 0x000000ff, priv->fpga_data_addr);
+		break;
+	case 0:
+		break;
+	default:
+		/* This will never happen */
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int socfpga_a10_fpga_write_complete(struct fpga_manager *mgr,
+					   struct fpga_image_info *info)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	u32 reg;
+	int ret;
+
+	/* Wait for pr_done */
+	ret = socfpga_a10_fpga_wait_for_pr_done(priv);
+
+	/* Clear pr_request */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST, 0);
+
+	/* Send some clocks to clear out any errors */
+	socfpga_a10_fpga_generate_dclks(priv, 256);
+
+	/* Disable s2f dclk and data */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL, 0);
+
+	/* Deassert chip select */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE);
+
+	/* Disable data, dclk, nce, and pr_request override to CSS */
+	regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG,
+			   A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+	/* Return any errors regarding pr_done or pr_error */
+	if (ret)
+		return ret;
+
+	/* Final check */
+	reg = socfpga_a10_fpga_read_stat(priv);
+
+	if (((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE) == 0) ||
+	    ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN) == 0) ||
+	    ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)) {
+		dev_dbg(&mgr->dev,
+			"Timeout in final check. Status=%08xf\n", reg);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static enum fpga_mgr_states socfpga_a10_fpga_state(struct fpga_manager *mgr)
+{
+	struct a10_fpga_priv *priv = mgr->priv;
+	u32 reg = socfpga_a10_fpga_read_stat(priv);
+
+	if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE)
+		return FPGA_MGR_STATE_OPERATING;
+
+	if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+		return FPGA_MGR_STATE_WRITE;
+
+	if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR)
+		return FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
+
+	if ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)
+		return FPGA_MGR_STATE_RESET;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops socfpga_a10_fpga_mgr_ops = {
+	.initial_header_size = (RBF_DECOMPRESS_OFFSET + 1) * 4,
+	.state = socfpga_a10_fpga_state,
+	.write_init = socfpga_a10_fpga_write_init,
+	.write = socfpga_a10_fpga_write,
+	.write_complete = socfpga_a10_fpga_write_complete,
+};
+
+static int socfpga_a10_fpga_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct a10_fpga_priv *priv;
+	void __iomem *reg_base;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* First mmio base is for register access */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	/* Second mmio base is for writing FPGA image data */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	priv->fpga_data_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->fpga_data_addr))
+		return PTR_ERR(priv->fpga_data_addr);
+
+	/* regmap for register access */
+	priv->regmap = devm_regmap_init_mmio(dev, reg_base,
+					     &socfpga_a10_fpga_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return -ENODEV;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "no clock specified\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "could not enable clock\n");
+		return -EBUSY;
+	}
+
+	return fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager",
+				 &socfpga_a10_fpga_mgr_ops, priv);
+}
+
+static int socfpga_a10_fpga_remove(struct platform_device *pdev)
+{
+	struct fpga_manager *mgr = platform_get_drvdata(pdev);
+	struct a10_fpga_priv *priv = mgr->priv;
+
+	fpga_mgr_unregister(&pdev->dev);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id socfpga_a10_fpga_of_match[] = {
+	{ .compatible = "altr,socfpga-a10-fpga-mgr", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, socfpga_a10_fpga_of_match);
+
+static struct platform_driver socfpga_a10_fpga_driver = {
+	.probe = socfpga_a10_fpga_probe,
+	.remove = socfpga_a10_fpga_remove,
+	.driver = {
+		.name	= "socfpga_a10_fpga_manager",
+		.of_match_table = socfpga_a10_fpga_of_match,
+	},
+};
+
+module_platform_driver(socfpga_a10_fpga_driver);
+
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_DESCRIPTION("SoCFPGA Arria10 FPGA Manager");
+MODULE_LICENSE("GPL v2");

drivers/fpga/socfpga.c

@@ -407,13 +407,14 @@ static int socfpga_fpga_reset(struct fpga_manager *mgr)
 /*
  * Prepare the FPGA to receive the configuration data.
  */
-static int socfpga_fpga_ops_configure_init(struct fpga_manager *mgr, u32 flags,
+static int socfpga_fpga_ops_configure_init(struct fpga_manager *mgr,
+					   struct fpga_image_info *info,
 					   const char *buf, size_t count)
 {
 	struct socfpga_fpga_priv *priv = mgr->priv;
 	int ret;
 
-	if (flags & FPGA_MGR_PARTIAL_RECONFIG) {
+	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
 		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
 		return -EINVAL;
 	}
@@ -478,7 +479,7 @@ static int socfpga_fpga_ops_configure_write(struct fpga_manager *mgr,
 }
 
 static int socfpga_fpga_ops_configure_complete(struct fpga_manager *mgr,
-					       u32 flags)
+					       struct fpga_image_info *info)
 {
 	struct socfpga_fpga_priv *priv = mgr->priv;
 	u32 status;

drivers/fpga/zynq-fpga.c

@@ -118,7 +118,6 @@
 #define FPGA_RST_NONE_MASK		0x0
 
 struct zynq_fpga_priv {
-	struct device *dev;
 	int irq;
 	struct clk *clk;
 
@@ -175,7 +174,8 @@ static irqreturn_t zynq_fpga_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
+static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
+				    struct fpga_image_info *info,
 				    const char *buf, size_t count)
 {
 	struct zynq_fpga_priv *priv;
@@ -189,7 +189,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
 		return err;
 
 	/* don't globally reset PL if we're doing partial reconfig */
-	if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+	if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
 		/* assert AXI interface resets */
 		regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
 			     FPGA_RST_ALL_MASK);
@@ -217,7 +217,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
 					     INIT_POLL_DELAY,
 					     INIT_POLL_TIMEOUT);
 		if (err) {
-			dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
+			dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
 			goto out_err;
 		}
 
@@ -231,7 +231,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
 					     INIT_POLL_DELAY,
 					     INIT_POLL_TIMEOUT);
 		if (err) {
-			dev_err(priv->dev, "Timeout waiting for !PCFG_INIT");
+			dev_err(&mgr->dev, "Timeout waiting for !PCFG_INIT\n");
 			goto out_err;
 		}
 
@@ -245,7 +245,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
 					     INIT_POLL_DELAY,
 					     INIT_POLL_TIMEOUT);
 		if (err) {
-			dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
+			dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
 			goto out_err;
 		}
 	}
@@ -262,7 +262,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
 	/* check that we have room in the command queue */
 	status = zynq_fpga_read(priv, STATUS_OFFSET);
 	if (status & STATUS_DMA_Q_F) {
-		dev_err(priv->dev, "DMA command queue full");
+		dev_err(&mgr->dev, "DMA command queue full\n");
 		err = -EBUSY;
 		goto out_err;
 	}
@@ -295,7 +295,8 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr,
 	in_count = count;
 	priv = mgr->priv;
 
-	kbuf = dma_alloc_coherent(priv->dev, count, &dma_addr, GFP_KERNEL);
+	kbuf =
+	    dma_alloc_coherent(mgr->dev.parent, count, &dma_addr, GFP_KERNEL);
 	if (!kbuf)
 		return -ENOMEM;
 
@@ -331,19 +332,19 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr,
 	zynq_fpga_write(priv, INT_STS_OFFSET, intr_status);
 
 	if (!((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
-		dev_err(priv->dev, "Error configuring FPGA");
+		dev_err(&mgr->dev, "Error configuring FPGA\n");
 		err = -EFAULT;
 	}
 
 	clk_disable(priv->clk);
 
 out_free:
-	dma_free_coherent(priv->dev, in_count, kbuf, dma_addr);
-
+	dma_free_coherent(mgr->dev.parent, count, kbuf, dma_addr);
 	return err;
 }
 
-static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
+static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
+					struct fpga_image_info *info)
 {
 	struct zynq_fpga_priv *priv = mgr->priv;
 	int err;
@@ -364,7 +365,7 @@ static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
 		return err;
 
 	/* for the partial reconfig case we didn't touch the level shifters */
-	if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+	if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
 		/* enable level shifters from PL to PS */
 		regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
 			     LVL_SHFTR_ENABLE_PL_TO_PS);
@@ -416,8 +417,6 @@ static int zynq_fpga_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->dev = dev;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->io_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->io_base))
@@ -426,7 +425,7 @@ static int zynq_fpga_probe(struct platform_device *pdev)
 	priv->slcr = syscon_regmap_lookup_by_phandle(dev->of_node,
 		"syscon");
 	if (IS_ERR(priv->slcr)) {
-		dev_err(dev, "unable to get zynq-slcr regmap");
+		dev_err(dev, "unable to get zynq-slcr regmap\n");
 		return PTR_ERR(priv->slcr);
 	}
 
@@ -434,38 +433,41 @@ static int zynq_fpga_probe(struct platform_device *pdev)
 
 	priv->irq = platform_get_irq(pdev, 0);
 	if (priv->irq < 0) {
-		dev_err(dev, "No IRQ available");
+		dev_err(dev, "No IRQ available\n");
 		return priv->irq;
 	}
 
-	err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0,
-			       dev_name(dev), priv);
-	if (err) {
-		dev_err(dev, "unable to request IRQ");
-		return err;
-	}
-
 	priv->clk = devm_clk_get(dev, "ref_clk");
 	if (IS_ERR(priv->clk)) {
-		dev_err(dev, "input clock not found");
+		dev_err(dev, "input clock not found\n");
 		return PTR_ERR(priv->clk);
 	}
 
 	err = clk_prepare_enable(priv->clk);
 	if (err) {
-		dev_err(dev, "unable to enable clock");
+		dev_err(dev, "unable to enable clock\n");
 		return err;
 	}
 
 	/* unlock the device */
 	zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);
 
+	zynq_fpga_write(priv, INT_MASK_OFFSET, 0xFFFFFFFF);
+	zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
+	err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0, dev_name(dev),
+			       priv);
+	if (err) {
+		dev_err(dev, "unable to request IRQ\n");
+		clk_disable_unprepare(priv->clk);
+		return err;
+	}
+
 	clk_disable(priv->clk);
 
 	err = fpga_mgr_register(dev, "Xilinx Zynq FPGA Manager",
 				&zynq_fpga_ops, priv);
 	if (err) {
-		dev_err(dev, "unable to register FPGA manager");
+		dev_err(dev, "unable to register FPGA manager\n");
 		clk_unprepare(priv->clk);
 		return err;
 	}

drivers/hv/channel.c

@@ -39,7 +39,7 @@
  * vmbus_setevent- Trigger an event notification on the specified
  * channel.
  */
-static void vmbus_setevent(struct vmbus_channel *channel)
+void vmbus_setevent(struct vmbus_channel *channel)
 {
 	struct hv_monitor_page *monitorpage;
 
@@ -65,6 +65,7 @@ static void vmbus_setevent(struct vmbus_channel *channel)
 		vmbus_set_event(channel);
 	}
 }
+EXPORT_SYMBOL_GPL(vmbus_setevent);
 
 /*
  * vmbus_open - Open the specified channel.
@@ -635,8 +636,6 @@ int vmbus_sendpacket_ctl(struct vmbus_channel *channel, void *buffer,
 	u32 packetlen_aligned = ALIGN(packetlen, sizeof(u64));
 	struct kvec bufferlist[3];
 	u64 aligned_data = 0;
-	int ret;
-	bool signal = false;
 	bool lock = channel->acquire_ring_lock;
 	int num_vecs = ((bufferlen != 0) ? 3 : 1);
 
@@ -656,33 +655,9 @@ int vmbus_sendpacket_ctl(struct vmbus_channel *channel, void *buffer,
 	bufferlist[2].iov_base = &aligned_data;
 	bufferlist[2].iov_len = (packetlen_aligned - packetlen);
 
-	ret = hv_ringbuffer_write(&channel->outbound, bufferlist, num_vecs,
-				  &signal, lock, channel->signal_policy);
-
-	/*
-	 * Signalling the host is conditional on many factors:
-	 * 1. The ring state changed from being empty to non-empty.
-	 *    This is tracked by the variable "signal".
-	 * 2. The variable kick_q tracks if more data will be placed
-	 *    on the ring. We will not signal if more data is
-	 *    to be placed.
-	 *
-	 * Based on the channel signal state, we will decide
-	 * which signaling policy will be applied.
-	 *
-	 * If we cannot write to the ring-buffer; signal the host
-	 * even if we may not have written anything. This is a rare
-	 * enough condition that it should not matter.
-	 * NOTE: in this case, the hvsock channel is an exception, because
-	 * it looks the host side's hvsock implementation has a throttling
-	 * mechanism which can hurt the performance otherwise.
-	 */
-
-	if (((ret == 0) && kick_q && signal) ||
-	    (ret && !is_hvsock_channel(channel)))
-		vmbus_setevent(channel);
+	return hv_ringbuffer_write(channel, bufferlist, num_vecs,
+				   lock, kick_q);
 
-	return ret;
 }
 EXPORT_SYMBOL(vmbus_sendpacket_ctl);
 
@@ -723,7 +698,6 @@ int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel,
 				     u32 flags,
 				     bool kick_q)
 {
-	int ret;
 	int i;
 	struct vmbus_channel_packet_page_buffer desc;
 	u32 descsize;
@@ -731,7 +705,6 @@ int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel,
 	u32 packetlen_aligned;
 	struct kvec bufferlist[3];
 	u64 aligned_data = 0;
-	bool signal = false;
 	bool lock = channel->acquire_ring_lock;
 
 	if (pagecount > MAX_PAGE_BUFFER_COUNT)
@@ -769,29 +742,8 @@ int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel,
 	bufferlist[2].iov_base = &aligned_data;
 	bufferlist[2].iov_len = (packetlen_aligned - packetlen);
 
-	ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3,
-				  &signal, lock, channel->signal_policy);
-
-	/*
-	 * Signalling the host is conditional on many factors:
-	 * 1. The ring state changed from being empty to non-empty.
-	 *    This is tracked by the variable "signal".
-	 * 2. The variable kick_q tracks if more data will be placed
-	 *    on the ring. We will not signal if more data is
-	 *    to be placed.
-	 *
-	 * Based on the channel signal state, we will decide
-	 * which signaling policy will be applied.
-	 *
-	 * If we cannot write to the ring-buffer; signal the host
-	 * even if we may not have written anything. This is a rare
-	 * enough condition that it should not matter.
-	 */
-
-	if (((ret == 0) && kick_q && signal) || (ret))
-		vmbus_setevent(channel);
-
-	return ret;
+	return hv_ringbuffer_write(channel, bufferlist, 3,
+				   lock, kick_q);
 }
 EXPORT_SYMBOL_GPL(vmbus_sendpacket_pagebuffer_ctl);
 
@@ -822,12 +774,10 @@ int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel,
 			      u32 desc_size,
 			      void *buffer, u32 bufferlen, u64 requestid)
 {
-	int ret;
 	u32 packetlen;
 	u32 packetlen_aligned;
 	struct kvec bufferlist[3];
 	u64 aligned_data = 0;
-	bool signal = false;
 	bool lock = channel->acquire_ring_lock;
 
 	packetlen = desc_size + bufferlen;
@@ -848,13 +798,8 @@ int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel,
 	bufferlist[2].iov_base = &aligned_data;
 	bufferlist[2].iov_len = (packetlen_aligned - packetlen);
 
-	ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3,
-				  &signal, lock, channel->signal_policy);
-
-	if (ret == 0 && signal)
-		vmbus_setevent(channel);
-
-	return ret;
+	return hv_ringbuffer_write(channel, bufferlist, 3,
+				   lock, true);
 }
 EXPORT_SYMBOL_GPL(vmbus_sendpacket_mpb_desc);
 
@@ -866,14 +811,12 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
 				struct hv_multipage_buffer *multi_pagebuffer,
 				void *buffer, u32 bufferlen, u64 requestid)
 {
-	int ret;
 	struct vmbus_channel_packet_multipage_buffer desc;
 	u32 descsize;
 	u32 packetlen;
 	u32 packetlen_aligned;
 	struct kvec bufferlist[3];
 	u64 aligned_data = 0;
-	bool signal = false;
 	bool lock = channel->acquire_ring_lock;
 	u32 pfncount = NUM_PAGES_SPANNED(multi_pagebuffer->offset,
 					 multi_pagebuffer->len);
@@ -913,13 +856,8 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
 	bufferlist[2].iov_base = &aligned_data;
 	bufferlist[2].iov_len = (packetlen_aligned - packetlen);
 
-	ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3,
-				  &signal, lock, channel->signal_policy);
-
-	if (ret == 0 && signal)
-		vmbus_setevent(channel);
-
-	return ret;
+	return hv_ringbuffer_write(channel, bufferlist, 3,
+				   lock, true);
 }
 EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
 
@@ -941,16 +879,9 @@ __vmbus_recvpacket(struct vmbus_channel *channel, void *buffer,
 		   u32 bufferlen, u32 *buffer_actual_len, u64 *requestid,
 		   bool raw)
 {
-	int ret;
-	bool signal = false;
+	return hv_ringbuffer_read(channel, buffer, bufferlen,
+				  buffer_actual_len, requestid, raw);
 
-	ret = hv_ringbuffer_read(&channel->inbound, buffer, bufferlen,
-				 buffer_actual_len, requestid, &signal, raw);
-
-	if (signal)
-		vmbus_setevent(channel);
-
-	return ret;
 }
 
 int vmbus_recvpacket(struct vmbus_channel *channel, void *buffer,

drivers/hv/channel_mgmt.c

@@ -134,7 +134,7 @@ static const struct vmbus_device vmbus_devs[] = {
 	},
 
 	/* Unknown GUID */
-	{ .dev_type = HV_UNKOWN,
+	{ .dev_type = HV_UNKNOWN,
 	  .perf_device = false,
 	},
 };
@@ -163,9 +163,9 @@ static u16 hv_get_dev_type(const struct vmbus_channel *channel)
 	u16 i;
 
 	if (is_hvsock_channel(channel) || is_unsupported_vmbus_devs(guid))
-		return HV_UNKOWN;
+		return HV_UNKNOWN;
 
-	for (i = HV_IDE; i < HV_UNKOWN; i++) {
+	for (i = HV_IDE; i < HV_UNKNOWN; i++) {
 		if (!uuid_le_cmp(*guid, vmbus_devs[i].guid))
 			return i;
 	}
@@ -389,6 +389,7 @@ void vmbus_free_channels(void)
 {
 	struct vmbus_channel *channel, *tmp;
 
+	mutex_lock(&vmbus_connection.channel_mutex);
 	list_for_each_entry_safe(channel, tmp, &vmbus_connection.chn_list,
 		listentry) {
 		/* hv_process_channel_removal() needs this */
@@ -396,6 +397,7 @@ void vmbus_free_channels(void)
 
 		vmbus_device_unregister(channel->device_obj);
 	}
+	mutex_unlock(&vmbus_connection.channel_mutex);
 }
 
 /*
@@ -447,8 +449,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 	}
 
 	dev_type = hv_get_dev_type(newchannel);
-	if (dev_type == HV_NIC)
-		set_channel_signal_state(newchannel, HV_SIGNAL_POLICY_EXPLICIT);
 
 	init_vp_index(newchannel, dev_type);
 

drivers/hv/connection.c

@@ -39,6 +39,7 @@ struct vmbus_connection vmbus_connection = {
 	.conn_state		= DISCONNECTED,
 	.next_gpadl_handle	= ATOMIC_INIT(0xE1E10),
 };
+EXPORT_SYMBOL_GPL(vmbus_connection);
 
 /*
  * Negotiated protocol version with the host.

drivers/hv/hv.c

@@ -575,7 +575,7 @@ void hv_synic_clockevents_cleanup(void)
 	if (!(ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE))
 		return;
 
-	for_each_online_cpu(cpu)
+	for_each_present_cpu(cpu)
 		clockevents_unbind_device(hv_context.clk_evt[cpu], cpu);
 }
 
@@ -594,8 +594,10 @@ void hv_synic_cleanup(void *arg)
 		return;
 
 	/* Turn off clockevent device */
-	if (ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE)
+	if (ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE) {
+		clockevents_unbind_device(hv_context.clk_evt[cpu], cpu);
 		hv_ce_shutdown(hv_context.clk_evt[cpu]);
+	}
 
 	rdmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, shared_sint.as_uint64);
 

drivers/hv/hv_balloon.c

@@ -564,6 +564,11 @@ struct hv_dynmem_device {
 	 * next version to try.
 	 */
 	__u32 next_version;
+
+	/*
+	 * The negotiated version agreed by host.
+	 */
+	__u32 version;
 };
 
 static struct hv_dynmem_device dm_device;
@@ -645,6 +650,7 @@ static void hv_bring_pgs_online(struct hv_hotadd_state *has,
 {
 	int i;
 
+	pr_debug("Online %lu pages starting at pfn 0x%lx\n", size, start_pfn);
 	for (i = 0; i < size; i++)
 		hv_page_online_one(has, pfn_to_page(start_pfn + i));
 }
@@ -685,7 +691,7 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size,
 				(HA_CHUNK << PAGE_SHIFT));
 
 		if (ret) {
-			pr_info("hot_add memory failed error is %d\n", ret);
+			pr_warn("hot_add memory failed error is %d\n", ret);
 			if (ret == -EEXIST) {
 				/*
 				 * This error indicates that the error
@@ -814,6 +820,9 @@ static unsigned long handle_pg_range(unsigned long pg_start,
 	unsigned long old_covered_state;
 	unsigned long res = 0, flags;
 
+	pr_debug("Hot adding %lu pages starting at pfn 0x%lx.\n", pg_count,
+		pg_start);
+
 	spin_lock_irqsave(&dm_device.ha_lock, flags);
 	list_for_each_entry(has, &dm_device.ha_region_list, list) {
 		/*
@@ -1025,8 +1034,13 @@ static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg)
 
 	switch (info_hdr->type) {
 	case INFO_TYPE_MAX_PAGE_CNT:
-		pr_info("Received INFO_TYPE_MAX_PAGE_CNT\n");
-		pr_info("Data Size is %d\n", info_hdr->data_size);
+		if (info_hdr->data_size == sizeof(__u64)) {
+			__u64 *max_page_count = (__u64 *)&info_hdr[1];
+
+			pr_info("INFO_TYPE_MAX_PAGE_CNT = %llu\n",
+				*max_page_count);
+		}
+
 		break;
 	default:
 		pr_info("Received Unknown type: %d\n", info_hdr->type);
@@ -1196,8 +1210,6 @@ static unsigned int alloc_balloon_pages(struct hv_dynmem_device *dm,
 	return num_pages;
 }
 
-
-
 static void balloon_up(struct work_struct *dummy)
 {
 	unsigned int num_pages = dm_device.balloon_wrk.num_pages;
@@ -1224,6 +1236,10 @@ static void balloon_up(struct work_struct *dummy)
 
 	/* Refuse to balloon below the floor, keep the 2M granularity. */
 	if (avail_pages < num_pages || avail_pages - num_pages < floor) {
+		pr_warn("Balloon request will be partially fulfilled. %s\n",
+			avail_pages < num_pages ? "Not enough memory." :
+			"Balloon floor reached.");
+
 		num_pages = avail_pages > floor ? (avail_pages - floor) : 0;
 		num_pages -= num_pages % PAGES_IN_2M;
 	}
@@ -1245,6 +1261,9 @@ static void balloon_up(struct work_struct *dummy)
 		}
 
 		if (num_ballooned == 0 || num_ballooned == num_pages) {
+			pr_debug("Ballooned %u out of %u requested pages.\n",
+				num_pages, dm_device.balloon_wrk.num_pages);
+
 			bl_resp->more_pages = 0;
 			done = true;
 			dm_device.state = DM_INITIALIZED;
@@ -1292,12 +1311,16 @@ static void balloon_down(struct hv_dynmem_device *dm,
 	int range_count = req->range_count;
 	struct dm_unballoon_response resp;
 	int i;
+	unsigned int prev_pages_ballooned = dm->num_pages_ballooned;
 
 	for (i = 0; i < range_count; i++) {
 		free_balloon_pages(dm, &range_array[i]);
 		complete(&dm_device.config_event);
 	}
 
+	pr_debug("Freed %u ballooned pages.\n",
+		prev_pages_ballooned - dm->num_pages_ballooned);
+
 	if (req->more_pages == 1)
 		return;
 
@@ -1365,6 +1388,7 @@ static void version_resp(struct hv_dynmem_device *dm,
 	version_req.hdr.size = sizeof(struct dm_version_request);
 	version_req.hdr.trans_id = atomic_inc_return(&trans_id);
 	version_req.version.version = dm->next_version;
+	dm->version = version_req.version.version;
 
 	/*
 	 * Set the next version to try in case current version fails.
@@ -1501,7 +1525,11 @@ static int balloon_probe(struct hv_device *dev,
 	struct dm_version_request version_req;
 	struct dm_capabilities cap_msg;
 
+#ifdef CONFIG_MEMORY_HOTPLUG
 	do_hot_add = hot_add;
+#else
+	do_hot_add = false;
+#endif
 
 	/*
 	 * First allocate a send buffer.
@@ -1553,6 +1581,7 @@ static int balloon_probe(struct hv_device *dev,
 	version_req.hdr.trans_id = atomic_inc_return(&trans_id);
 	version_req.version.version = DYNMEM_PROTOCOL_VERSION_WIN10;
 	version_req.is_last_attempt = 0;
+	dm_device.version = version_req.version.version;
 
 	ret = vmbus_sendpacket(dev->channel, &version_req,
 				sizeof(struct dm_version_request),
@@ -1575,6 +1604,11 @@ static int balloon_probe(struct hv_device *dev,
 		ret = -ETIMEDOUT;
 		goto probe_error2;
 	}
+
+	pr_info("Using Dynamic Memory protocol version %u.%u\n",
+		DYNMEM_MAJOR_VERSION(dm_device.version),
+		DYNMEM_MINOR_VERSION(dm_device.version));
+
 	/*
 	 * Now submit our capabilities to the host.
 	 */

drivers/hv/hv_snapshot.c

@@ -31,7 +31,10 @@
 #define VSS_MINOR  0
 #define VSS_VERSION    (VSS_MAJOR << 16 | VSS_MINOR)
 
-#define VSS_USERSPACE_TIMEOUT (msecs_to_jiffies(10 * 1000))
+/*
+ * Timeout values are based on expecations from host
+ */
+#define VSS_FREEZE_TIMEOUT (15 * 60)
 
 /*
  * Global state maintained for transaction that is being processed. For a class
@@ -120,7 +123,7 @@ static int vss_handle_handshake(struct hv_vss_msg *vss_msg)
 	default:
 		return -EINVAL;
 	}
-	pr_debug("VSS: userspace daemon ver. %d connected\n", dm_reg_value);
+	pr_info("VSS: userspace daemon ver. %d connected\n", dm_reg_value);
 	return 0;
 }
 
@@ -128,8 +131,10 @@ static int vss_on_msg(void *msg, int len)
 {
 	struct hv_vss_msg *vss_msg = (struct hv_vss_msg *)msg;
 
-	if (len != sizeof(*vss_msg))
+	if (len != sizeof(*vss_msg)) {
+		pr_debug("VSS: Message size does not match length\n");
 		return -EINVAL;
+	}
 
 	if (vss_msg->vss_hdr.operation == VSS_OP_REGISTER ||
 	    vss_msg->vss_hdr.operation == VSS_OP_REGISTER1) {
@@ -137,8 +142,11 @@ static int vss_on_msg(void *msg, int len)
 		 * Don't process registration messages if we're in the middle
 		 * of a transaction processing.
 		 */
-		if (vss_transaction.state > HVUTIL_READY)
+		if (vss_transaction.state > HVUTIL_READY) {
+			pr_debug("VSS: Got unexpected registration request\n");
 			return -EINVAL;
+		}
+
 		return vss_handle_handshake(vss_msg);
 	} else if (vss_transaction.state == HVUTIL_USERSPACE_REQ) {
 		vss_transaction.state = HVUTIL_USERSPACE_RECV;
@@ -155,7 +163,7 @@ static int vss_on_msg(void *msg, int len)
 		}
 	} else {
 		/* This is a spurious call! */
-		pr_warn("VSS: Transaction not active\n");
+		pr_debug("VSS: Transaction not active\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -168,8 +176,10 @@ static void vss_send_op(void)
 	struct hv_vss_msg *vss_msg;
 
 	/* The transaction state is wrong. */
-	if (vss_transaction.state != HVUTIL_HOSTMSG_RECEIVED)
+	if (vss_transaction.state != HVUTIL_HOSTMSG_RECEIVED) {
+		pr_debug("VSS: Unexpected attempt to send to daemon\n");
 		return;
+	}
 
 	vss_msg = kzalloc(sizeof(*vss_msg), GFP_KERNEL);
 	if (!vss_msg)
@@ -179,7 +189,8 @@ static void vss_send_op(void)
 
 	vss_transaction.state = HVUTIL_USERSPACE_REQ;
 
-	schedule_delayed_work(&vss_timeout_work, VSS_USERSPACE_TIMEOUT);
+	schedule_delayed_work(&vss_timeout_work, op == VSS_OP_FREEZE ?
+			VSS_FREEZE_TIMEOUT * HZ : HV_UTIL_TIMEOUT * HZ);
 
 	rc = hvutil_transport_send(hvt, vss_msg, sizeof(*vss_msg), NULL);
 	if (rc) {
@@ -210,9 +221,13 @@ static void vss_handle_request(struct work_struct *dummy)
 	case VSS_OP_HOT_BACKUP:
 		if (vss_transaction.state < HVUTIL_READY) {
 			/* Userspace is not registered yet */
+			pr_debug("VSS: Not ready for request.\n");
 			vss_respond_to_host(HV_E_FAIL);
 			return;
 		}
+
+		pr_debug("VSS: Received request for op code: %d\n",
+			vss_transaction.msg->vss_hdr.operation);
 		vss_transaction.state = HVUTIL_HOSTMSG_RECEIVED;
 		vss_send_op();
 		return;
@@ -353,8 +368,10 @@ hv_vss_init(struct hv_util_service *srv)
 
 	hvt = hvutil_transport_init(vss_devname, CN_VSS_IDX, CN_VSS_VAL,
 				    vss_on_msg, vss_on_reset);
-	if (!hvt)
+	if (!hvt) {
+		pr_warn("VSS: Failed to initialize transport\n");
 		return -EFAULT;
+	}
 
 	return 0;
 }

drivers/hv/hv_util.c

@@ -389,16 +389,19 @@ static int util_probe(struct hv_device *dev,
 		ts_srv_version = TS_VERSION_1;
 		hb_srv_version = HB_VERSION_1;
 		break;
-	case(VERSION_WIN10):
+	case VERSION_WIN7:
+	case VERSION_WIN8:
+	case VERSION_WIN8_1:
 		util_fw_version = UTIL_FW_VERSION;
 		sd_srv_version = SD_VERSION;
-		ts_srv_version = TS_VERSION;
+		ts_srv_version = TS_VERSION_3;
 		hb_srv_version = HB_VERSION;
 		break;
+	case VERSION_WIN10:
 	default:
 		util_fw_version = UTIL_FW_VERSION;
 		sd_srv_version = SD_VERSION;
-		ts_srv_version = TS_VERSION_3;
+		ts_srv_version = TS_VERSION;
 		hb_srv_version = HB_VERSION;
 	}
 

drivers/hv/hyperv_vmbus.h

@@ -38,7 +38,7 @@
 /*
  * Timeout for guest-host handshake for services.
  */
-#define HV_UTIL_NEGO_TIMEOUT 60
+#define HV_UTIL_NEGO_TIMEOUT 55
 
 /*
  * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
@@ -527,14 +527,14 @@ int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info,
 
 void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info);
 
-int hv_ringbuffer_write(struct hv_ring_buffer_info *ring_info,
+int hv_ringbuffer_write(struct vmbus_channel *channel,
 		    struct kvec *kv_list,
-		    u32 kv_count, bool *signal, bool lock,
-		    enum hv_signal_policy policy);
+		    u32 kv_count, bool lock,
+		    bool kick_q);
 
-int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
+int hv_ringbuffer_read(struct vmbus_channel *channel,
 		       void *buffer, u32 buflen, u32 *buffer_actual_len,
-		       u64 *requestid, bool *signal, bool raw);
+		       u64 *requestid, bool raw);
 
 void hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info,
 			    struct hv_ring_buffer_debug_info *debug_info);

drivers/hv/ring_buffer.c

@@ -66,21 +66,25 @@ u32 hv_end_read(struct hv_ring_buffer_info *rbi)
  *	   once the ring buffer is empty, it will clear the
  *	   interrupt_mask and re-check to see if new data has
  *	   arrived.
+ *
+ * KYS: Oct. 30, 2016:
+ * It looks like Windows hosts have logic to deal with DOS attacks that
+ * can be triggered if it receives interrupts when it is not expecting
+ * the interrupt. The host expects interrupts only when the ring
+ * transitions from empty to non-empty (or full to non full on the guest
+ * to host ring).
+ * So, base the signaling decision solely on the ring state until the
+ * host logic is fixed.
  */
 
-static bool hv_need_to_signal(u32 old_write, struct hv_ring_buffer_info *rbi,
-			      enum hv_signal_policy policy)
+static void hv_signal_on_write(u32 old_write, struct vmbus_channel *channel,
+			       bool kick_q)
 {
+	struct hv_ring_buffer_info *rbi = &channel->outbound;
+
 	virt_mb();
 	if (READ_ONCE(rbi->ring_buffer->interrupt_mask))
-		return false;
-
-	/*
-	 * When the client wants to control signaling,
-	 * we only honour the host interrupt mask.
-	 */
-	if (policy == HV_SIGNAL_POLICY_EXPLICIT)
-		return true;
+		return;
 
 	/* check interrupt_mask before read_index */
 	virt_rmb();
@@ -89,9 +93,9 @@ static bool hv_need_to_signal(u32 old_write, struct hv_ring_buffer_info *rbi,
 	 * ring transitions from being empty to non-empty.
 	 */
 	if (old_write == READ_ONCE(rbi->ring_buffer->read_index))
-		return true;
+		vmbus_setevent(channel);
 
-	return false;
+	return;
 }
 
 /* Get the next write location for the specified ring buffer. */
@@ -280,9 +284,9 @@ void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info)
 }
 
 /* Write to the ring buffer. */
-int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
-		    struct kvec *kv_list, u32 kv_count, bool *signal, bool lock,
-		    enum hv_signal_policy policy)
+int hv_ringbuffer_write(struct vmbus_channel *channel,
+		    struct kvec *kv_list, u32 kv_count, bool lock,
+		    bool kick_q)
 {
 	int i = 0;
 	u32 bytes_avail_towrite;
@@ -292,6 +296,7 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
 	u32 old_write;
 	u64 prev_indices = 0;
 	unsigned long flags = 0;
+	struct hv_ring_buffer_info *outring_info = &channel->outbound;
 
 	for (i = 0; i < kv_count; i++)
 		totalbytes_towrite += kv_list[i].iov_len;
@@ -344,13 +349,13 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
 	if (lock)
 		spin_unlock_irqrestore(&outring_info->ring_lock, flags);
 
-	*signal = hv_need_to_signal(old_write, outring_info, policy);
+	hv_signal_on_write(old_write, channel, kick_q);
 	return 0;
 }
 
-int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
+int hv_ringbuffer_read(struct vmbus_channel *channel,
 		       void *buffer, u32 buflen, u32 *buffer_actual_len,
-		       u64 *requestid, bool *signal, bool raw)
+		       u64 *requestid, bool raw)
 {
 	u32 bytes_avail_toread;
 	u32 next_read_location = 0;
@@ -359,6 +364,7 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
 	u32 offset;
 	u32 packetlen;
 	int ret = 0;
+	struct hv_ring_buffer_info *inring_info = &channel->inbound;
 
 	if (buflen <= 0)
 		return -EINVAL;
@@ -416,7 +422,7 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
 	/* Update the read index */
 	hv_set_next_read_location(inring_info, next_read_location);
 
-	*signal = hv_need_to_signal_on_read(inring_info);
+	hv_signal_on_read(channel);
 
 	return ret;
 }

drivers/hv/vmbus_drv.c

@@ -45,6 +45,11 @@
 #include <linux/random.h>
 #include "hyperv_vmbus.h"
 
+struct vmbus_dynid {
+	struct list_head node;
+	struct hv_vmbus_device_id id;
+};
+
 static struct acpi_device  *hv_acpi_dev;
 
 static struct completion probe_event;
@@ -500,7 +505,7 @@ static ssize_t device_show(struct device *dev,
 static DEVICE_ATTR_RO(device);
 
 /* Set up per device attributes in /sys/bus/vmbus/devices/<bus device> */
-static struct attribute *vmbus_attrs[] = {
+static struct attribute *vmbus_dev_attrs[] = {
 	&dev_attr_id.attr,
 	&dev_attr_state.attr,
 	&dev_attr_monitor_id.attr,
@@ -528,7 +533,7 @@ static struct attribute *vmbus_attrs[] = {
 	&dev_attr_device.attr,
 	NULL,
 };
-ATTRIBUTE_GROUPS(vmbus);
+ATTRIBUTE_GROUPS(vmbus_dev);
 
 /*
  * vmbus_uevent - add uevent for our device
@@ -565,10 +570,29 @@ static inline bool is_null_guid(const uuid_le *guid)
  * Return a matching hv_vmbus_device_id pointer.
  * If there is no match, return NULL.
  */
-static const struct hv_vmbus_device_id *hv_vmbus_get_id(
-					const struct hv_vmbus_device_id *id,
+static const struct hv_vmbus_device_id *hv_vmbus_get_id(struct hv_driver *drv,
 					const uuid_le *guid)
 {
+	const struct hv_vmbus_device_id *id = NULL;
+	struct vmbus_dynid *dynid;
+
+	/* Look at the dynamic ids first, before the static ones */
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry(dynid, &drv->dynids.list, node) {
+		if (!uuid_le_cmp(dynid->id.guid, *guid)) {
+			id = &dynid->id;
+			break;
+		}
+	}
+	spin_unlock(&drv->dynids.lock);
+
+	if (id)
+		return id;
+
+	id = drv->id_table;
+	if (id == NULL)
+		return NULL; /* empty device table */
+
 	for (; !is_null_guid(&id->guid); id++)
 		if (!uuid_le_cmp(id->guid, *guid))
 			return id;
@@ -576,6 +600,134 @@ static const struct hv_vmbus_device_id *hv_vmbus_get_id(
 	return NULL;
 }
 
+/* vmbus_add_dynid - add a new device ID to this driver and re-probe devices */
+static int vmbus_add_dynid(struct hv_driver *drv, uuid_le *guid)
+{
+	struct vmbus_dynid *dynid;
+
+	dynid = kzalloc(sizeof(*dynid), GFP_KERNEL);
+	if (!dynid)
+		return -ENOMEM;
+
+	dynid->id.guid = *guid;
+
+	spin_lock(&drv->dynids.lock);
+	list_add_tail(&dynid->node, &drv->dynids.list);
+	spin_unlock(&drv->dynids.lock);
+
+	return driver_attach(&drv->driver);
+}
+
+static void vmbus_free_dynids(struct hv_driver *drv)
+{
+	struct vmbus_dynid *dynid, *n;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+		list_del(&dynid->node);
+		kfree(dynid);
+	}
+	spin_unlock(&drv->dynids.lock);
+}
+
+/* Parse string of form: 1b4e28ba-2fa1-11d2-883f-b9a761bde3f */
+static int get_uuid_le(const char *str, uuid_le *uu)
+{
+	unsigned int b[16];
+	int i;
+
+	if (strlen(str) < 37)
+		return -1;
+
+	for (i = 0; i < 36; i++) {
+		switch (i) {
+		case 8: case 13: case 18: case 23:
+			if (str[i] != '-')
+				return -1;
+			break;
+		default:
+			if (!isxdigit(str[i]))
+				return -1;
+		}
+	}
+
+	/* unparse little endian output byte order */
+	if (sscanf(str,
+		   "%2x%2x%2x%2x-%2x%2x-%2x%2x-%2x%2x-%2x%2x%2x%2x%2x%2x",
+		   &b[3], &b[2], &b[1], &b[0],
+		   &b[5], &b[4], &b[7], &b[6], &b[8], &b[9],
+		   &b[10], &b[11], &b[12], &b[13], &b[14], &b[15]) != 16)
+		return -1;
+
+	for (i = 0; i < 16; i++)
+		uu->b[i] = b[i];
+	return 0;
+}
+
+/*
+ * store_new_id - sysfs frontend to vmbus_add_dynid()
+ *
+ * Allow GUIDs to be added to an existing driver via sysfs.
+ */
+static ssize_t new_id_store(struct device_driver *driver, const char *buf,
+			    size_t count)
+{
+	struct hv_driver *drv = drv_to_hv_drv(driver);
+	uuid_le guid = NULL_UUID_LE;
+	ssize_t retval;
+
+	if (get_uuid_le(buf, &guid) != 0)
+		return -EINVAL;
+
+	if (hv_vmbus_get_id(drv, &guid))
+		return -EEXIST;
+
+	retval = vmbus_add_dynid(drv, &guid);
+	if (retval)
+		return retval;
+	return count;
+}
+static DRIVER_ATTR_WO(new_id);
+
+/*
+ * store_remove_id - remove a PCI device ID from this driver
+ *
+ * Removes a dynamic pci device ID to this driver.
+ */
+static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
+			       size_t count)
+{
+	struct hv_driver *drv = drv_to_hv_drv(driver);
+	struct vmbus_dynid *dynid, *n;
+	uuid_le guid = NULL_UUID_LE;
+	size_t retval = -ENODEV;
+
+	if (get_uuid_le(buf, &guid))
+		return -EINVAL;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+		struct hv_vmbus_device_id *id = &dynid->id;
+
+		if (!uuid_le_cmp(id->guid, guid)) {
+			list_del(&dynid->node);
+			kfree(dynid);
+			retval = count;
+			break;
+		}
+	}
+	spin_unlock(&drv->dynids.lock);
+
+	return retval;
+}
+static DRIVER_ATTR_WO(remove_id);
+
+static struct attribute *vmbus_drv_attrs[] = {
+	&driver_attr_new_id.attr,
+	&driver_attr_remove_id.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(vmbus_drv);
 
 
 /*
@@ -590,7 +742,7 @@ static int vmbus_match(struct device *device, struct device_driver *driver)
 	if (is_hvsock_channel(hv_dev->channel))
 		return drv->hvsock;
 
-	if (hv_vmbus_get_id(drv->id_table, &hv_dev->dev_type))
+	if (hv_vmbus_get_id(drv, &hv_dev->dev_type))
 		return 1;
 
 	return 0;
@@ -607,7 +759,7 @@ static int vmbus_probe(struct device *child_device)
 	struct hv_device *dev = device_to_hv_device(child_device);
 	const struct hv_vmbus_device_id *dev_id;
 
-	dev_id = hv_vmbus_get_id(drv->id_table, &dev->dev_type);
+	dev_id = hv_vmbus_get_id(drv, &dev->dev_type);
 	if (drv->probe) {
 		ret = drv->probe(dev, dev_id);
 		if (ret != 0)
@@ -684,7 +836,8 @@ static struct bus_type  hv_bus = {
 	.remove =		vmbus_remove,
 	.probe =		vmbus_probe,
 	.uevent =		vmbus_uevent,
-	.dev_groups =		vmbus_groups,
+	.dev_groups =		vmbus_dev_groups,
+	.drv_groups =		vmbus_drv_groups,
 };
 
 struct onmessage_work_context {
@@ -905,6 +1058,9 @@ int __vmbus_driver_register(struct hv_driver *hv_driver, struct module *owner, c
 	hv_driver->driver.mod_name = mod_name;
 	hv_driver->driver.bus = &hv_bus;
 
+	spin_lock_init(&hv_driver->dynids.lock);
+	INIT_LIST_HEAD(&hv_driver->dynids.list);
+
 	ret = driver_register(&hv_driver->driver);
 
 	return ret;
@@ -923,8 +1079,10 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver)
 {
 	pr_info("unregistering driver %s\n", hv_driver->name);
 
-	if (!vmbus_exists())
+	if (!vmbus_exists()) {
 		driver_unregister(&hv_driver->driver);
+		vmbus_free_dynids(hv_driver);
+	}
 }
 EXPORT_SYMBOL_GPL(vmbus_driver_unregister);
 

drivers/hwtracing/coresight/coresight-etm-perf.c

@@ -202,6 +202,21 @@ static void *etm_setup_aux(int event_cpu, void **pages,
 	if (!event_data)
 		return NULL;
 
+	/*
+	 * In theory nothing prevent tracers in a trace session from being
+	 * associated with different sinks, nor having a sink per tracer.  But
+	 * until we have HW with this kind of topology we need to assume tracers
+	 * in a trace session are using the same sink.  Therefore go through
+	 * the coresight bus and pick the first enabled sink.
+	 *
+	 * When operated from sysFS users are responsible to enable the sink
+	 * while from perf, the perf tools will do it based on the choice made
+	 * on the cmd line.  As such the "enable_sink" flag in sysFS is reset.
+	 */
+	sink = coresight_get_enabled_sink(true);
+	if (!sink)
+		goto err;
+
 	INIT_WORK(&event_data->work, free_event_data);
 
 	mask = &event_data->mask;
@@ -219,25 +234,11 @@ static void *etm_setup_aux(int event_cpu, void **pages,
 		 * list of devices from source to sink that can be
 		 * referenced later when the path is actually needed.
 		 */
-		event_data->path[cpu] = coresight_build_path(csdev);
+		event_data->path[cpu] = coresight_build_path(csdev, sink);
 		if (IS_ERR(event_data->path[cpu]))
 			goto err;
 	}
 
-	/*
-	 * In theory nothing prevent tracers in a trace session from being
-	 * associated with different sinks, nor having a sink per tracer.  But
-	 * until we have HW with this kind of topology and a way to convey
-	 * sink assignement from the perf cmd line we need to assume tracers
-	 * in a trace session are using the same sink.  Therefore pick the sink
-	 * found at the end of the first available path.
-	 */
-	cpu = cpumask_first(mask);
-	/* Grab the sink at the end of the path */
-	sink = coresight_get_sink(event_data->path[cpu]);
-	if (!sink)
-		goto err;
-
 	if (!sink_ops(sink)->alloc_buffer)
 		goto err;
 

drivers/hwtracing/coresight/coresight-etm.h

@@ -89,11 +89,13 @@
 /* ETMCR - 0x00 */
 #define ETMCR_PWD_DWN		BIT(0)
 #define ETMCR_STALL_MODE	BIT(7)
+#define ETMCR_BRANCH_BROADCAST	BIT(8)
 #define ETMCR_ETM_PRG		BIT(10)
 #define ETMCR_ETM_EN		BIT(11)
 #define ETMCR_CYC_ACC		BIT(12)
 #define ETMCR_CTXID_SIZE	(BIT(14)|BIT(15))
 #define ETMCR_TIMESTAMP_EN	BIT(28)
+#define ETMCR_RETURN_STACK	BIT(29)
 /* ETMCCR - 0x04 */
 #define ETMCCR_FIFOFULL		BIT(23)
 /* ETMPDCR - 0x310 */
@@ -110,8 +112,11 @@
 #define ETM_MODE_STALL		BIT(2)
 #define ETM_MODE_TIMESTAMP	BIT(3)
 #define ETM_MODE_CTXID		BIT(4)
+#define ETM_MODE_BBROAD		BIT(5)
+#define ETM_MODE_RET_STACK	BIT(6)
 #define ETM_MODE_ALL		(ETM_MODE_EXCLUDE | ETM_MODE_CYCACC | \
 				 ETM_MODE_STALL | ETM_MODE_TIMESTAMP | \
+				 ETM_MODE_BBROAD | ETM_MODE_RET_STACK | \
 				 ETM_MODE_CTXID | ETM_MODE_EXCL_KERN | \
 				 ETM_MODE_EXCL_USER)
 

drivers/hwtracing/coresight/coresight-etm3x-sysfs.c

@@ -146,7 +146,7 @@ static ssize_t mode_store(struct device *dev,
 			goto err_unlock;
 		}
 		config->ctrl |= ETMCR_STALL_MODE;
-	 } else
+	} else
 		config->ctrl &= ~ETMCR_STALL_MODE;
 
 	if (config->mode & ETM_MODE_TIMESTAMP) {
@@ -164,6 +164,16 @@ static ssize_t mode_store(struct device *dev,
 	else
 		config->ctrl &= ~ETMCR_CTXID_SIZE;
 
+	if (config->mode & ETM_MODE_BBROAD)
+		config->ctrl |= ETMCR_BRANCH_BROADCAST;
+	else
+		config->ctrl &= ~ETMCR_BRANCH_BROADCAST;
+
+	if (config->mode & ETM_MODE_RET_STACK)
+		config->ctrl |= ETMCR_RETURN_STACK;
+	else
+		config->ctrl &= ~ETMCR_RETURN_STACK;
+
 	if (config->mode & (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER))
 		etm_config_trace_mode(config);
 

drivers/hwtracing/coresight/coresight-priv.h

@@ -111,7 +111,9 @@ static inline void CS_UNLOCK(void __iomem *addr)
 void coresight_disable_path(struct list_head *path);
 int coresight_enable_path(struct list_head *path, u32 mode);
 struct coresight_device *coresight_get_sink(struct list_head *path);
-struct list_head *coresight_build_path(struct coresight_device *csdev);
+struct coresight_device *coresight_get_enabled_sink(bool reset);
+struct list_head *coresight_build_path(struct coresight_device *csdev,
+				       struct coresight_device *sink);
 void coresight_release_path(struct list_head *path);
 
 #ifdef CONFIG_CORESIGHT_SOURCE_ETM3X

drivers/hwtracing/coresight/coresight-stm.c

@@ -419,10 +419,10 @@ static ssize_t stm_generic_packet(struct stm_data *stm_data,
 						   struct stm_drvdata, stm);
 
 	if (!(drvdata && local_read(&drvdata->mode)))
-		return 0;
+		return -EACCES;
 
 	if (channel >= drvdata->numsp)
-		return 0;
+		return -EINVAL;
 
 	ch_addr = (unsigned long)stm_channel_addr(drvdata, channel);
 
@@ -920,6 +920,11 @@ static struct amba_id stm_ids[] = {
 		.mask   = 0x0003ffff,
 		.data	= "STM32",
 	},
+	{
+		.id	= 0x0003b963,
+		.mask	= 0x0003ffff,
+		.data	= "STM500",
+	},
 	{ 0, 0},
 };
 

drivers/hwtracing/coresight/coresight-tmc-etf.c

@@ -70,7 +70,7 @@ static void tmc_etb_disable_hw(struct tmc_drvdata *drvdata)
 	 * When operating in sysFS mode the content of the buffer needs to be
 	 * read before the TMC is disabled.
 	 */
-	if (local_read(&drvdata->mode) == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS)
 		tmc_etb_dump_hw(drvdata);
 	tmc_disable_hw(drvdata);
 
@@ -103,19 +103,14 @@ static void tmc_etf_disable_hw(struct tmc_drvdata *drvdata)
 	CS_LOCK(drvdata->base);
 }
 
-static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev)
 {
 	int ret = 0;
 	bool used = false;
 	char *buf = NULL;
-	long val;
 	unsigned long flags;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
-	 /* This shouldn't be happening */
-	if (WARN_ON(mode != CS_MODE_SYSFS))
-		return -EINVAL;
-
 	/*
 	 * If we don't have a buffer release the lock and allocate memory.
 	 * Otherwise keep the lock and move along.
@@ -138,13 +133,12 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev, u32 mode)
 		goto out;
 	}
 
-	val = local_xchg(&drvdata->mode, mode);
 	/*
 	 * In sysFS mode we can have multiple writers per sink.  Since this
 	 * sink is already enabled no memory is needed and the HW need not be
 	 * touched.
 	 */
-	if (val == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS)
 		goto out;
 
 	/*
@@ -163,6 +157,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev, u32 mode)
 		drvdata->buf = buf;
 	}
 
+	drvdata->mode = CS_MODE_SYSFS;
 	tmc_etb_enable_hw(drvdata);
 out:
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -177,34 +172,29 @@ out:
 	return ret;
 }
 
-static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etf_sink_perf(struct coresight_device *csdev)
 {
 	int ret = 0;
-	long val;
 	unsigned long flags;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
-	 /* This shouldn't be happening */
-	if (WARN_ON(mode != CS_MODE_PERF))
-		return -EINVAL;
-
 	spin_lock_irqsave(&drvdata->spinlock, flags);
 	if (drvdata->reading) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	val = local_xchg(&drvdata->mode, mode);
 	/*
 	 * In Perf mode there can be only one writer per sink.  There
 	 * is also no need to continue if the ETB/ETR is already operated
 	 * from sysFS.
 	 */
-	if (val != CS_MODE_DISABLED) {
+	if (drvdata->mode != CS_MODE_DISABLED) {
 		ret = -EINVAL;
 		goto out;
 	}
 
+	drvdata->mode = CS_MODE_PERF;
 	tmc_etb_enable_hw(drvdata);
 out:
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -216,9 +206,9 @@ static int tmc_enable_etf_sink(struct coresight_device *csdev, u32 mode)
 {
 	switch (mode) {
 	case CS_MODE_SYSFS:
-		return tmc_enable_etf_sink_sysfs(csdev, mode);
+		return tmc_enable_etf_sink_sysfs(csdev);
 	case CS_MODE_PERF:
-		return tmc_enable_etf_sink_perf(csdev, mode);
+		return tmc_enable_etf_sink_perf(csdev);
 	}
 
 	/* We shouldn't be here */
@@ -227,7 +217,6 @@ static int tmc_enable_etf_sink(struct coresight_device *csdev, u32 mode)
 
 static void tmc_disable_etf_sink(struct coresight_device *csdev)
 {
-	long val;
 	unsigned long flags;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
@@ -237,10 +226,11 @@ static void tmc_disable_etf_sink(struct coresight_device *csdev)
 		return;
 	}
 
-	val = local_xchg(&drvdata->mode, CS_MODE_DISABLED);
 	/* Disable the TMC only if it needs to */
-	if (val != CS_MODE_DISABLED)
+	if (drvdata->mode != CS_MODE_DISABLED) {
 		tmc_etb_disable_hw(drvdata);
+		drvdata->mode = CS_MODE_DISABLED;
+	}
 
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
@@ -260,7 +250,7 @@ static int tmc_enable_etf_link(struct coresight_device *csdev,
 	}
 
 	tmc_etf_enable_hw(drvdata);
-	local_set(&drvdata->mode, CS_MODE_SYSFS);
+	drvdata->mode = CS_MODE_SYSFS;
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
 	dev_info(drvdata->dev, "TMC-ETF enabled\n");
@@ -280,7 +270,7 @@ static void tmc_disable_etf_link(struct coresight_device *csdev,
 	}
 
 	tmc_etf_disable_hw(drvdata);
-	local_set(&drvdata->mode, CS_MODE_DISABLED);
+	drvdata->mode = CS_MODE_DISABLED;
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
 	dev_info(drvdata->dev, "TMC disabled\n");
@@ -383,7 +373,7 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
 		return;
 
 	/* This shouldn't happen */
-	if (WARN_ON_ONCE(local_read(&drvdata->mode) != CS_MODE_PERF))
+	if (WARN_ON_ONCE(drvdata->mode != CS_MODE_PERF))
 		return;
 
 	CS_UNLOCK(drvdata->base);
@@ -504,7 +494,6 @@ const struct coresight_ops tmc_etf_cs_ops = {
 
 int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 {
-	long val;
 	enum tmc_mode mode;
 	int ret = 0;
 	unsigned long flags;
@@ -528,9 +517,8 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 		goto out;
 	}
 
-	val = local_read(&drvdata->mode);
 	/* Don't interfere if operated from Perf */
-	if (val == CS_MODE_PERF) {
+	if (drvdata->mode == CS_MODE_PERF) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -542,7 +530,7 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 	}
 
 	/* Disable the TMC if need be */
-	if (val == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS)
 		tmc_etb_disable_hw(drvdata);
 
 	drvdata->reading = true;
@@ -573,7 +561,7 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata)
 	}
 
 	/* Re-enable the TMC if need be */
-	if (local_read(&drvdata->mode) == CS_MODE_SYSFS) {
+	if (drvdata->mode == CS_MODE_SYSFS) {
 		/*
 		 * The trace run will continue with the same allocated trace
 		 * buffer. As such zero-out the buffer so that we don't end

drivers/hwtracing/coresight/coresight-tmc-etr.c

@@ -86,26 +86,22 @@ static void tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
 	 * When operating in sysFS mode the content of the buffer needs to be
 	 * read before the TMC is disabled.
 	 */
-	if (local_read(&drvdata->mode) == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS)
 		tmc_etr_dump_hw(drvdata);
 	tmc_disable_hw(drvdata);
 
 	CS_LOCK(drvdata->base);
 }
 
-static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
 {
 	int ret = 0;
 	bool used = false;
-	long val;
 	unsigned long flags;
 	void __iomem *vaddr = NULL;
 	dma_addr_t paddr;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
-	 /* This shouldn't be happening */
-	if (WARN_ON(mode != CS_MODE_SYSFS))
-		return -EINVAL;
 
 	/*
 	 * If we don't have a buffer release the lock and allocate memory.
@@ -134,13 +130,12 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev, u32 mode)
 		goto out;
 	}
 
-	val = local_xchg(&drvdata->mode, mode);
 	/*
 	 * In sysFS mode we can have multiple writers per sink.  Since this
 	 * sink is already enabled no memory is needed and the HW need not be
 	 * touched.
 	 */
-	if (val == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS)
 		goto out;
 
 	/*
@@ -155,8 +150,7 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev, u32 mode)
 		drvdata->buf = drvdata->vaddr;
 	}
 
-	memset(drvdata->vaddr, 0, drvdata->size);
-
+	drvdata->mode = CS_MODE_SYSFS;
 	tmc_etr_enable_hw(drvdata);
 out:
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -171,34 +165,29 @@ out:
 	return ret;
 }
 
-static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etr_sink_perf(struct coresight_device *csdev)
 {
 	int ret = 0;
-	long val;
 	unsigned long flags;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
-	 /* This shouldn't be happening */
-	if (WARN_ON(mode != CS_MODE_PERF))
-		return -EINVAL;
-
 	spin_lock_irqsave(&drvdata->spinlock, flags);
 	if (drvdata->reading) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	val = local_xchg(&drvdata->mode, mode);
 	/*
 	 * In Perf mode there can be only one writer per sink.  There
 	 * is also no need to continue if the ETR is already operated
 	 * from sysFS.
 	 */
-	if (val != CS_MODE_DISABLED) {
+	if (drvdata->mode != CS_MODE_DISABLED) {
 		ret = -EINVAL;
 		goto out;
 	}
 
+	drvdata->mode = CS_MODE_PERF;
 	tmc_etr_enable_hw(drvdata);
 out:
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -210,9 +199,9 @@ static int tmc_enable_etr_sink(struct coresight_device *csdev, u32 mode)
 {
 	switch (mode) {
 	case CS_MODE_SYSFS:
-		return tmc_enable_etr_sink_sysfs(csdev, mode);
+		return tmc_enable_etr_sink_sysfs(csdev);
 	case CS_MODE_PERF:
-		return tmc_enable_etr_sink_perf(csdev, mode);
+		return tmc_enable_etr_sink_perf(csdev);
 	}
 
 	/* We shouldn't be here */
@@ -221,7 +210,6 @@ static int tmc_enable_etr_sink(struct coresight_device *csdev, u32 mode)
 
 static void tmc_disable_etr_sink(struct coresight_device *csdev)
 {
-	long val;
 	unsigned long flags;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
@@ -231,10 +219,11 @@ static void tmc_disable_etr_sink(struct coresight_device *csdev)
 		return;
 	}
 
-	val = local_xchg(&drvdata->mode, CS_MODE_DISABLED);
 	/* Disable the TMC only if it needs to */
-	if (val != CS_MODE_DISABLED)
+	if (drvdata->mode != CS_MODE_DISABLED) {
 		tmc_etr_disable_hw(drvdata);
+		drvdata->mode = CS_MODE_DISABLED;
+	}
 
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
@@ -253,7 +242,6 @@ const struct coresight_ops tmc_etr_cs_ops = {
 int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
 {
 	int ret = 0;
-	long val;
 	unsigned long flags;
 
 	/* config types are set a boot time and never change */
@@ -266,9 +254,8 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
 		goto out;
 	}
 
-	val = local_read(&drvdata->mode);
 	/* Don't interfere if operated from Perf */
-	if (val == CS_MODE_PERF) {
+	if (drvdata->mode == CS_MODE_PERF) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -280,7 +267,7 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
 	}
 
 	/* Disable the TMC if need be */
-	if (val == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS)
 		tmc_etr_disable_hw(drvdata);
 
 	drvdata->reading = true;
@@ -303,7 +290,7 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata)
 	spin_lock_irqsave(&drvdata->spinlock, flags);
 
 	/* RE-enable the TMC if need be */
-	if (local_read(&drvdata->mode) == CS_MODE_SYSFS) {
+	if (drvdata->mode == CS_MODE_SYSFS) {
 		/*
 		 * The trace run will continue with the same allocated trace
 		 * buffer. The trace buffer is cleared in tmc_etr_enable_hw(),

drivers/hwtracing/coresight/coresight-tmc.h

@@ -117,7 +117,7 @@ struct tmc_drvdata {
 	void __iomem		*vaddr;
 	u32			size;
 	u32			len;
-	local_t			mode;
+	u32			mode;
 	enum tmc_config_type	config_type;
 	enum tmc_mem_intf_width	memwidth;
 	u32			trigger_cntr;

drivers/hwtracing/coresight/coresight.c

@@ -368,6 +368,52 @@ struct coresight_device *coresight_get_sink(struct list_head *path)
 	return csdev;
 }
 
+static int coresight_enabled_sink(struct device *dev, void *data)
+{
+	bool *reset = data;
+	struct coresight_device *csdev = to_coresight_device(dev);
+
+	if ((csdev->type == CORESIGHT_DEV_TYPE_SINK ||
+	     csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) &&
+	     csdev->activated) {
+		/*
+		 * Now that we have a handle on the sink for this session,
+		 * disable the sysFS "enable_sink" flag so that possible
+		 * concurrent perf session that wish to use another sink don't
+		 * trip on it.  Doing so has no ramification for the current
+		 * session.
+		 */
+		if (*reset)
+			csdev->activated = false;
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * coresight_get_enabled_sink - returns the first enabled sink found on the bus
+ * @deactivate:	Whether the 'enable_sink' flag should be reset
+ *
+ * When operated from perf the deactivate parameter should be set to 'true'.
+ * That way the "enabled_sink" flag of the sink that was selected can be reset,
+ * allowing for other concurrent perf sessions to choose a different sink.
+ *
+ * When operated from sysFS users have full control and as such the deactivate
+ * parameter should be set to 'false', hence mandating users to explicitly
+ * clear the flag.
+ */
+struct coresight_device *coresight_get_enabled_sink(bool deactivate)
+{
+	struct device *dev = NULL;
+
+	dev = bus_find_device(&coresight_bustype, NULL, &deactivate,
+			      coresight_enabled_sink);
+
+	return dev ? to_coresight_device(dev) : NULL;
+}
+
 /**
  * _coresight_build_path - recursively build a path from a @csdev to a sink.
  * @csdev:	The device to start from.
@@ -380,6 +426,7 @@ struct coresight_device *coresight_get_sink(struct list_head *path)
  * last one.
  */
 static int _coresight_build_path(struct coresight_device *csdev,
+				 struct coresight_device *sink,
 				 struct list_head *path)
 {
 	int i;
@@ -387,15 +434,15 @@ static int _coresight_build_path(struct coresight_device *csdev,
 	struct coresight_node *node;
 
 	/* An activated sink has been found.  Enqueue the element */
-	if ((csdev->type == CORESIGHT_DEV_TYPE_SINK ||
-	     csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) && csdev->activated)
+	if (csdev == sink)
 		goto out;
 
 	/* Not a sink - recursively explore each port found on this element */
 	for (i = 0; i < csdev->nr_outport; i++) {
 		struct coresight_device *child_dev = csdev->conns[i].child_dev;
 
-		if (child_dev && _coresight_build_path(child_dev, path) == 0) {
+		if (child_dev &&
+		    _coresight_build_path(child_dev, sink, path) == 0) {
 			found = true;
 			break;
 		}
@@ -422,18 +469,22 @@ out:
 	return 0;
 }
 
-struct list_head *coresight_build_path(struct coresight_device *csdev)
+struct list_head *coresight_build_path(struct coresight_device *source,
+				       struct coresight_device *sink)
 {
 	struct list_head *path;
 	int rc;
 
+	if (!sink)
+		return ERR_PTR(-EINVAL);
+
 	path = kzalloc(sizeof(struct list_head), GFP_KERNEL);
 	if (!path)
 		return ERR_PTR(-ENOMEM);
 
 	INIT_LIST_HEAD(path);
 
-	rc = _coresight_build_path(csdev, path);
+	rc = _coresight_build_path(source, sink, path);
 	if (rc) {
 		kfree(path);
 		return ERR_PTR(rc);
@@ -497,6 +548,7 @@ static int coresight_validate_source(struct coresight_device *csdev,
 int coresight_enable(struct coresight_device *csdev)
 {
 	int cpu, ret = 0;
+	struct coresight_device *sink;
 	struct list_head *path;
 
 	mutex_lock(&coresight_mutex);
@@ -508,7 +560,17 @@ int coresight_enable(struct coresight_device *csdev)
 	if (csdev->enable)
 		goto out;
 
-	path = coresight_build_path(csdev);
+	/*
+	 * Search for a valid sink for this session but don't reset the
+	 * "enable_sink" flag in sysFS.  Users get to do that explicitly.
+	 */
+	sink = coresight_get_enabled_sink(false);
+	if (!sink) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	path = coresight_build_path(csdev, sink);
 	if (IS_ERR(path)) {
 		pr_err("building path(s) failed\n");
 		ret = PTR_ERR(path);

drivers/hwtracing/intel_th/core.c

@@ -29,6 +29,9 @@
 #include "intel_th.h"
 #include "debug.h"
 
+static bool host_mode __read_mostly;
+module_param(host_mode, bool, 0444);
+
 static DEFINE_IDA(intel_th_ida);
 
 static int intel_th_match(struct device *dev, struct device_driver *driver)
@@ -380,7 +383,7 @@ static void intel_th_device_free(struct intel_th_device *thdev)
 /*
  * Intel(R) Trace Hub subdevices
  */
-static struct intel_th_subdevice {
+static const struct intel_th_subdevice {
 	const char		*name;
 	struct resource		res[3];
 	unsigned		nres;
@@ -527,14 +530,19 @@ static int intel_th_populate(struct intel_th *th, struct resource *devres,
 {
 	struct resource res[3];
 	unsigned int req = 0;
-	int i, err;
+	int src, dst, err;
 
 	/* create devices for each intel_th_subdevice */
-	for (i = 0; i < ARRAY_SIZE(intel_th_subdevices); i++) {
-		struct intel_th_subdevice *subdev = &intel_th_subdevices[i];
+	for (src = 0, dst = 0; src < ARRAY_SIZE(intel_th_subdevices); src++) {
+		const struct intel_th_subdevice *subdev =
+			&intel_th_subdevices[src];
 		struct intel_th_device *thdev;
 		int r;
 
+		/* only allow SOURCE and SWITCH devices in host mode */
+		if (host_mode && subdev->type == INTEL_TH_OUTPUT)
+			continue;
+
 		thdev = intel_th_device_alloc(th, subdev->type, subdev->name,
 					      subdev->id);
 		if (!thdev) {
@@ -577,10 +585,12 @@ static int intel_th_populate(struct intel_th *th, struct resource *devres,
 		}
 
 		if (subdev->type == INTEL_TH_OUTPUT) {
-			thdev->dev.devt = MKDEV(th->major, i);
+			thdev->dev.devt = MKDEV(th->major, dst);
 			thdev->output.type = subdev->otype;
 			thdev->output.port = -1;
 			thdev->output.scratchpad = subdev->scrpd;
+		} else if (subdev->type == INTEL_TH_SWITCH) {
+			thdev->host_mode = host_mode;
 		}
 
 		err = device_add(&thdev->dev);
@@ -597,14 +607,14 @@ static int intel_th_populate(struct intel_th *th, struct resource *devres,
 				req++;
 		}
 
-		th->thdev[i] = thdev;
+		th->thdev[dst++] = thdev;
 	}
 
 	return 0;
 
 kill_subdevs:
-	for (i-- ; i >= 0; i--)
-		intel_th_device_remove(th->thdev[i]);
+	for (; dst >= 0; dst--)
+		intel_th_device_remove(th->thdev[dst]);
 
 	return err;
 }
@@ -717,7 +727,7 @@ void intel_th_free(struct intel_th *th)
 
 	intel_th_request_hub_module_flush(th);
 	for (i = 0; i < TH_SUBDEVICE_MAX; i++)
-		if (th->thdev[i] != th->hub)
+		if (th->thdev[i] && th->thdev[i] != th->hub)
 			intel_th_device_remove(th->thdev[i]);
 
 	intel_th_device_remove(th->hub);

drivers/hwtracing/intel_th/gth.c

@@ -564,6 +564,9 @@ static int intel_th_gth_assign(struct intel_th_device *thdev,
 	struct gth_device *gth = dev_get_drvdata(&thdev->dev);
 	int i, id;
 
+	if (thdev->host_mode)
+		return -EBUSY;
+
 	if (othdev->type != INTEL_TH_OUTPUT)
 		return -EINVAL;
 
@@ -600,6 +603,9 @@ static void intel_th_gth_unassign(struct intel_th_device *thdev,
 	struct gth_device *gth = dev_get_drvdata(&thdev->dev);
 	int port = othdev->output.port;
 
+	if (thdev->host_mode)
+		return;
+
 	spin_lock(&gth->gth_lock);
 	othdev->output.port = -1;
 	othdev->output.active = false;
@@ -654,9 +660,24 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
 	gth->base = base;
 	spin_lock_init(&gth->gth_lock);
 
+	/*
+	 * Host mode can be signalled via SW means or via SCRPD_DEBUGGER_IN_USE
+	 * bit. Either way, don't reset HW in this case, and don't export any
+	 * capture configuration attributes. Also, refuse to assign output
+	 * drivers to ports, see intel_th_gth_assign().
+	 */
+	if (thdev->host_mode)
+		goto done;
+
 	ret = intel_th_gth_reset(gth);
-	if (ret)
-		return ret;
+	if (ret) {
+		if (ret != -EBUSY)
+			return ret;
+
+		thdev->host_mode = true;
+
+		goto done;
+	}
 
 	for (i = 0; i < TH_CONFIGURABLE_MASTERS + 1; i++)
 		gth->master[i] = -1;
@@ -677,6 +698,7 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
 		return -ENOMEM;
 	}
 
+done:
 	dev_set_drvdata(dev, gth);
 
 	return 0;

drivers/hwtracing/intel_th/intel_th.h

@@ -54,6 +54,7 @@ struct intel_th_output {
  * @num_resources:	number of resources in @resource array
  * @type:		INTEL_TH_{SOURCE,OUTPUT,SWITCH}
  * @id:			device instance or -1
+ * @host_mode:		Intel TH is controlled by an external debug host
  * @output:		output descriptor for INTEL_TH_OUTPUT devices
  * @name:		device name to match the driver
  */
@@ -64,6 +65,9 @@ struct intel_th_device {
 	unsigned int	type;
 	int		id;
 
+	/* INTEL_TH_SWITCH specific */
+	bool			host_mode;
+
 	/* INTEL_TH_OUTPUT specific */
 	struct intel_th_output	output;
 

drivers/hwtracing/stm/core.c

@@ -361,7 +361,7 @@ static int stm_char_open(struct inode *inode, struct file *file)
 	struct stm_file *stmf;
 	struct device *dev;
 	unsigned int major = imajor(inode);
-	int err = -ENODEV;
+	int err = -ENOMEM;
 
 	dev = class_find_device(&stm_class, NULL, &major, major_match);
 	if (!dev)
@@ -369,8 +369,9 @@ static int stm_char_open(struct inode *inode, struct file *file)
 
 	stmf = kzalloc(sizeof(*stmf), GFP_KERNEL);
 	if (!stmf)
-		return -ENOMEM;
+		goto err_put_device;
 
+	err = -ENODEV;
 	stm_output_init(&stmf->output);
 	stmf->stm = to_stm_device(dev);
 
@@ -382,9 +383,10 @@ static int stm_char_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 
 err_free:
+	kfree(stmf);
+err_put_device:
 	/* matches class_find_device() above */
 	put_device(dev);
-	kfree(stmf);
 
 	return err;
 }

drivers/lightnvm/core.c

@@ -22,7 +22,7 @@
 #include <linux/types.h>
 #include <linux/sem.h>
 #include <linux/bitmap.h>
-#include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/miscdevice.h>
 #include <linux/lightnvm.h>
 #include <linux/sched/sysctl.h>
@@ -1129,10 +1129,4 @@ static struct miscdevice _nvm_misc = {
 	.nodename	= "lightnvm/control",
 	.fops		= &_ctl_fops,
 };
-module_misc_device(_nvm_misc);
-
-MODULE_ALIAS_MISCDEV(MISC_DYNAMIC_MINOR);
-
-MODULE_AUTHOR("Matias Bjorling <m@bjorling.me>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.1");
+builtin_misc_device(_nvm_misc);

drivers/mcb/mcb-parse.c

@@ -149,7 +149,7 @@ static int chameleon_get_bar(char __iomem **base, phys_addr_t mapbase,
 		reg = readl(*base);
 
 		bar_count = BAR_CNT(reg);
-		if (bar_count <= 0 && bar_count > CHAMELEON_BAR_MAX)
+		if (bar_count <= 0 || bar_count > CHAMELEON_BAR_MAX)
 			return -ENODEV;
 
 		c = kcalloc(bar_count, sizeof(struct chameleon_bar),

drivers/misc/genwqe/card_base.h

@@ -41,7 +41,6 @@
 #include "genwqe_driver.h"
 
 #define GENWQE_MSI_IRQS			4  /* Just one supported, no MSIx */
-#define GENWQE_FLAG_MSI_ENABLED		(1 << 0)
 
 #define GENWQE_MAX_VFS			15 /* maximum 15 VFs are possible */
 #define GENWQE_MAX_FUNCS		16 /* 1 PF and 15 VFs */

drivers/misc/genwqe/card_utils.c

@@ -740,13 +740,10 @@ int genwqe_read_softreset(struct genwqe_dev *cd)
 int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count)
 {
 	int rc;
-	struct pci_dev *pci_dev = cd->pci_dev;
 
-	rc = pci_enable_msi_range(pci_dev, 1, count);
+	rc = pci_alloc_irq_vectors(cd->pci_dev, 1, count, PCI_IRQ_MSI);
 	if (rc < 0)
 		return rc;
-
-	cd->flags |= GENWQE_FLAG_MSI_ENABLED;
 	return 0;
 }
 
@@ -756,12 +753,7 @@ int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count)
  */
 void genwqe_reset_interrupt_capability(struct genwqe_dev *cd)
 {
-	struct pci_dev *pci_dev = cd->pci_dev;
-
-	if (cd->flags & GENWQE_FLAG_MSI_ENABLED) {
-		pci_disable_msi(pci_dev);
-		cd->flags &= ~GENWQE_FLAG_MSI_ENABLED;
-	}
+	pci_free_irq_vectors(cd->pci_dev);
 }
 
 /**

drivers/misc/lkdtm_bugs.c

@@ -85,7 +85,8 @@ noinline void lkdtm_CORRUPT_STACK(void)
 	/* Use default char array length that triggers stack protection. */
 	char data[8];
 
-	memset((void *)data, 0, 64);
+	memset((void *)data, 'a', 64);
+	pr_info("Corrupted stack with '%16s'...\n", data);
 }
 
 void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void)

drivers/misc/lkdtm_perms.c

@@ -60,15 +60,18 @@ static noinline void execute_location(void *dst, bool write)
 
 static void execute_user_location(void *dst)
 {
+	int copied;
+
 	/* Intentionally crossing kernel/user memory boundary. */
 	void (*func)(void) = dst;
 
 	pr_info("attempting ok execution at %p\n", do_nothing);
 	do_nothing();
 
-	if (copy_to_user((void __user *)dst, do_nothing, EXEC_SIZE))
+	copied = access_process_vm(current, (unsigned long)dst, do_nothing,
+				   EXEC_SIZE, FOLL_WRITE);
+	if (copied < EXEC_SIZE)
 		return;
-	flush_icache_range((unsigned long)dst, (unsigned long)dst + EXEC_SIZE);
 	pr_info("attempting bad execution at %p\n", func);
 	func();
 }

drivers/misc/mei/amthif.c

@@ -144,7 +144,7 @@ int mei_amthif_run_next_cmd(struct mei_device *dev)
 	dev->iamthif_state = MEI_IAMTHIF_WRITING;
 	cl->fp = cb->fp;
 
-	ret = mei_cl_write(cl, cb, false);
+	ret = mei_cl_write(cl, cb);
 	if (ret < 0)
 		return ret;
 

drivers/misc/mei/bus-fixup.c

@@ -38,6 +38,9 @@ static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO;
 #define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \
 			    0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB)
 
+#define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \
+			0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb)
+
 #define MEI_UUID_ANY NULL_UUID_LE
 
 /**
@@ -69,6 +72,97 @@ static void blacklist(struct mei_cl_device *cldev)
 	cldev->do_match = 0;
 }
 
+#define OSTYPE_LINUX    2
+struct mei_os_ver {
+	__le16 build;
+	__le16 reserved1;
+	u8  os_type;
+	u8  major;
+	u8  minor;
+	u8  reserved2;
+} __packed;
+
+#define MKHI_FEATURE_PTT 0x10
+
+struct mkhi_rule_id {
+	__le16 rule_type;
+	u8 feature_id;
+	u8 reserved;
+} __packed;
+
+struct mkhi_fwcaps {
+	struct mkhi_rule_id id;
+	u8 len;
+	u8 data[0];
+} __packed;
+
+#define MKHI_FWCAPS_GROUP_ID 0x3
+#define MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD 6
+struct mkhi_msg_hdr {
+	u8  group_id;
+	u8  command;
+	u8  reserved;
+	u8  result;
+} __packed;
+
+struct mkhi_msg {
+	struct mkhi_msg_hdr hdr;
+	u8 data[0];
+} __packed;
+
+static int mei_osver(struct mei_cl_device *cldev)
+{
+	int ret;
+	const size_t size = sizeof(struct mkhi_msg_hdr) +
+			    sizeof(struct mkhi_fwcaps) +
+			    sizeof(struct mei_os_ver);
+	size_t length = 8;
+	char buf[size];
+	struct mkhi_msg *req;
+	struct mkhi_fwcaps *fwcaps;
+	struct mei_os_ver *os_ver;
+	unsigned int mode = MEI_CL_IO_TX_BLOCKING | MEI_CL_IO_TX_INTERNAL;
+
+	memset(buf, 0, size);
+
+	req = (struct mkhi_msg *)buf;
+	req->hdr.group_id = MKHI_FWCAPS_GROUP_ID;
+	req->hdr.command = MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD;
+
+	fwcaps = (struct mkhi_fwcaps *)req->data;
+
+	fwcaps->id.rule_type = 0x0;
+	fwcaps->id.feature_id = MKHI_FEATURE_PTT;
+	fwcaps->len = sizeof(*os_ver);
+	os_ver = (struct mei_os_ver *)fwcaps->data;
+	os_ver->os_type = OSTYPE_LINUX;
+
+	ret = __mei_cl_send(cldev->cl, buf, size, mode);
+	if (ret < 0)
+		return ret;
+
+	ret = __mei_cl_recv(cldev->cl, buf, length, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void mei_mkhi_fix(struct mei_cl_device *cldev)
+{
+	int ret;
+
+	ret = mei_cldev_enable(cldev);
+	if (ret)
+		return;
+
+	ret = mei_osver(cldev);
+	if (ret)
+		dev_err(&cldev->dev, "OS version command failed %d\n", ret);
+
+	mei_cldev_disable(cldev);
+}
+
 /**
  * mei_wd - wd client on the bus, change protocol version
  *   as the API has changed.
@@ -162,7 +256,8 @@ static int mei_nfc_if_version(struct mei_cl *cl,
 
 	WARN_ON(mutex_is_locked(&bus->device_lock));
 
-	ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd), 1);
+	ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd),
+			    MEI_CL_IO_TX_BLOCKING);
 	if (ret < 0) {
 		dev_err(bus->dev, "Could not send IF version cmd\n");
 		return ret;
@@ -177,7 +272,7 @@ static int mei_nfc_if_version(struct mei_cl *cl,
 		return -ENOMEM;
 
 	ret = 0;
-	bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length);
+	bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, 0);
 	if (bytes_recv < if_version_length) {
 		dev_err(bus->dev, "Could not read IF version\n");
 		ret = -EIO;
@@ -309,6 +404,7 @@ static struct mei_fixup {
 	MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist),
 	MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc),
 	MEI_FIXUP(MEI_UUID_WD, mei_wd),
+	MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix),
 };
 
 /**

drivers/misc/mei/bus.c

@@ -36,12 +36,12 @@
  * @cl: host client
  * @buf: buffer to send
  * @length: buffer length
- * @blocking: wait for write completion
+ * @mode: sending mode
  *
  * Return: written size bytes or < 0 on error
  */
 ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
-			bool blocking)
+		      unsigned int mode)
 {
 	struct mei_device *bus;
 	struct mei_cl_cb *cb;
@@ -80,9 +80,11 @@ ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
 		goto out;
 	}
 
+	cb->internal = !!(mode & MEI_CL_IO_TX_INTERNAL);
+	cb->blocking = !!(mode & MEI_CL_IO_TX_BLOCKING);
 	memcpy(cb->buf.data, buf, length);
 
-	rets = mei_cl_write(cl, cb, blocking);
+	rets = mei_cl_write(cl, cb);
 
 out:
 	mutex_unlock(&bus->device_lock);
@@ -96,15 +98,18 @@ out:
  * @cl: host client
  * @buf: buffer to receive
  * @length: buffer length
+ * @mode: io mode
  *
  * Return: read size in bytes of < 0 on error
  */
-ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length)
+ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length,
+		      unsigned int mode)
 {
 	struct mei_device *bus;
 	struct mei_cl_cb *cb;
 	size_t r_length;
 	ssize_t rets;
+	bool nonblock = !!(mode & MEI_CL_IO_RX_NONBLOCK);
 
 	if (WARN_ON(!cl || !cl->dev))
 		return -ENODEV;
@@ -125,6 +130,11 @@ ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length)
 	if (rets && rets != -EBUSY)
 		goto out;
 
+	if (nonblock) {
+		rets = -EAGAIN;
+		goto out;
+	}
+
 	/* wait on event only if there is no other waiter */
 	/* synchronized under device mutex */
 	if (!waitqueue_active(&cl->rx_wait)) {
@@ -185,13 +195,29 @@ ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length)
 {
 	struct mei_cl *cl = cldev->cl;
 
-	if (cl == NULL)
-		return -ENODEV;
-
-	return __mei_cl_send(cl, buf, length, 1);
+	return __mei_cl_send(cl, buf, length, MEI_CL_IO_TX_BLOCKING);
 }
 EXPORT_SYMBOL_GPL(mei_cldev_send);
 
+/**
+ * mei_cldev_recv_nonblock - non block client receive (read)
+ *
+ * @cldev: me client device
+ * @buf: buffer to receive
+ * @length: buffer length
+ *
+ * Return: read size in bytes of < 0 on error
+ *         -EAGAIN if function will block.
+ */
+ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf,
+				size_t length)
+{
+	struct mei_cl *cl = cldev->cl;
+
+	return __mei_cl_recv(cl, buf, length, MEI_CL_IO_RX_NONBLOCK);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_recv_nonblock);
+
 /**
  * mei_cldev_recv - client receive (read)
  *
@@ -205,39 +231,45 @@ ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length)
 {
 	struct mei_cl *cl = cldev->cl;
 
-	if (cl == NULL)
-		return -ENODEV;
-
-	return __mei_cl_recv(cl, buf, length);
+	return __mei_cl_recv(cl, buf, length, 0);
 }
 EXPORT_SYMBOL_GPL(mei_cldev_recv);
 
 /**
- * mei_cl_bus_event_work  - dispatch rx event for a bus device
- *    and schedule new work
+ * mei_cl_bus_rx_work - dispatch rx event for a bus device
  *
  * @work: work
  */
-static void mei_cl_bus_event_work(struct work_struct *work)
+static void mei_cl_bus_rx_work(struct work_struct *work)
 {
 	struct mei_cl_device *cldev;
 	struct mei_device *bus;
 
-	cldev = container_of(work, struct mei_cl_device, event_work);
+	cldev = container_of(work, struct mei_cl_device, rx_work);
 
 	bus = cldev->bus;
 
-	if (cldev->event_cb)
-		cldev->event_cb(cldev, cldev->events, cldev->event_context);
+	if (cldev->rx_cb)
+		cldev->rx_cb(cldev);
+
+	mutex_lock(&bus->device_lock);
+	mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
+	mutex_unlock(&bus->device_lock);
+}
+
+/**
+ * mei_cl_bus_notif_work - dispatch FW notif event for a bus device
+ *
+ * @work: work
+ */
+static void mei_cl_bus_notif_work(struct work_struct *work)
+{
+	struct mei_cl_device *cldev;
 
-	cldev->events = 0;
+	cldev = container_of(work, struct mei_cl_device, notif_work);
 
-	/* Prepare for the next read */
-	if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
-		mutex_lock(&bus->device_lock);
-		mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
-		mutex_unlock(&bus->device_lock);
-	}
+	if (cldev->notif_cb)
+		cldev->notif_cb(cldev);
 }
 
 /**
@@ -252,18 +284,13 @@ bool mei_cl_bus_notify_event(struct mei_cl *cl)
 {
 	struct mei_cl_device *cldev = cl->cldev;
 
-	if (!cldev || !cldev->event_cb)
-		return false;
-
-	if (!(cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF)))
+	if (!cldev || !cldev->notif_cb)
 		return false;
 
 	if (!cl->notify_ev)
 		return false;
 
-	set_bit(MEI_CL_EVENT_NOTIF, &cldev->events);
-
-	schedule_work(&cldev->event_work);
+	schedule_work(&cldev->notif_work);
 
 	cl->notify_ev = false;
 
@@ -271,7 +298,7 @@ bool mei_cl_bus_notify_event(struct mei_cl *cl)
 }
 
 /**
- * mei_cl_bus_rx_event  - schedule rx event
+ * mei_cl_bus_rx_event - schedule rx event
  *
  * @cl: host client
  *
@@ -282,66 +309,81 @@ bool mei_cl_bus_rx_event(struct mei_cl *cl)
 {
 	struct mei_cl_device *cldev = cl->cldev;
 
-	if (!cldev || !cldev->event_cb)
-		return false;
-
-	if (!(cldev->events_mask & BIT(MEI_CL_EVENT_RX)))
+	if (!cldev || !cldev->rx_cb)
 		return false;
 
-	set_bit(MEI_CL_EVENT_RX, &cldev->events);
-
-	schedule_work(&cldev->event_work);
+	schedule_work(&cldev->rx_work);
 
 	return true;
 }
 
 /**
- * mei_cldev_register_event_cb - register event callback
+ * mei_cldev_register_rx_cb - register Rx event callback
  *
  * @cldev: me client devices
- * @event_cb: callback function
- * @events_mask: requested events bitmask
- * @context: driver context data
+ * @rx_cb: callback function
  *
  * Return: 0 on success
  *         -EALREADY if an callback is already registered
  *         <0 on other errors
  */
-int mei_cldev_register_event_cb(struct mei_cl_device *cldev,
-				unsigned long events_mask,
-				mei_cldev_event_cb_t event_cb, void *context)
+int mei_cldev_register_rx_cb(struct mei_cl_device *cldev, mei_cldev_cb_t rx_cb)
 {
 	struct mei_device *bus = cldev->bus;
 	int ret;
 
-	if (cldev->event_cb)
+	if (!rx_cb)
+		return -EINVAL;
+	if (cldev->rx_cb)
 		return -EALREADY;
 
-	cldev->events = 0;
-	cldev->events_mask = events_mask;
-	cldev->event_cb = event_cb;
-	cldev->event_context = context;
-	INIT_WORK(&cldev->event_work, mei_cl_bus_event_work);
+	cldev->rx_cb = rx_cb;
+	INIT_WORK(&cldev->rx_work, mei_cl_bus_rx_work);
 
-	if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
-		mutex_lock(&bus->device_lock);
-		ret = mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
-		mutex_unlock(&bus->device_lock);
-		if (ret && ret != -EBUSY)
-			return ret;
-	}
+	mutex_lock(&bus->device_lock);
+	ret = mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
+	mutex_unlock(&bus->device_lock);
+	if (ret && ret != -EBUSY)
+		return ret;
 
-	if (cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF)) {
-		mutex_lock(&bus->device_lock);
-		ret = mei_cl_notify_request(cldev->cl, NULL, event_cb ? 1 : 0);
-		mutex_unlock(&bus->device_lock);
-		if (ret)
-			return ret;
-	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mei_cldev_register_rx_cb);
+
+/**
+ * mei_cldev_register_notif_cb - register FW notification event callback
+ *
+ * @cldev: me client devices
+ * @notif_cb: callback function
+ *
+ * Return: 0 on success
+ *         -EALREADY if an callback is already registered
+ *         <0 on other errors
+ */
+int mei_cldev_register_notif_cb(struct mei_cl_device *cldev,
+				mei_cldev_cb_t notif_cb)
+{
+	struct mei_device *bus = cldev->bus;
+	int ret;
+
+	if (!notif_cb)
+		return -EINVAL;
+
+	if (cldev->notif_cb)
+		return -EALREADY;
+
+	cldev->notif_cb = notif_cb;
+	INIT_WORK(&cldev->notif_work, mei_cl_bus_notif_work);
+
+	mutex_lock(&bus->device_lock);
+	ret = mei_cl_notify_request(cldev->cl, NULL, 1);
+	mutex_unlock(&bus->device_lock);
+	if (ret)
+		return ret;
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(mei_cldev_register_event_cb);
+EXPORT_SYMBOL_GPL(mei_cldev_register_notif_cb);
 
 /**
  * mei_cldev_get_drvdata - driver data getter
@@ -403,7 +445,7 @@ EXPORT_SYMBOL_GPL(mei_cldev_ver);
  */
 bool mei_cldev_enabled(struct mei_cl_device *cldev)
 {
-	return cldev->cl && mei_cl_is_connected(cldev->cl);
+	return mei_cl_is_connected(cldev->cl);
 }
 EXPORT_SYMBOL_GPL(mei_cldev_enabled);
 
@@ -423,14 +465,13 @@ int mei_cldev_enable(struct mei_cl_device *cldev)
 
 	cl = cldev->cl;
 
-	if (!cl) {
+	if (cl->state == MEI_FILE_UNINITIALIZED) {
 		mutex_lock(&bus->device_lock);
-		cl = mei_cl_alloc_linked(bus);
+		ret = mei_cl_link(cl);
 		mutex_unlock(&bus->device_lock);
-		if (IS_ERR(cl))
-			return PTR_ERR(cl);
+		if (ret)
+			return ret;
 		/* update pointers */
-		cldev->cl = cl;
 		cl->cldev = cldev;
 	}
 
@@ -471,19 +512,17 @@ int mei_cldev_disable(struct mei_cl_device *cldev)
 	struct mei_cl *cl;
 	int err;
 
-	if (!cldev || !cldev->cl)
+	if (!cldev)
 		return -ENODEV;
 
 	cl = cldev->cl;
 
 	bus = cldev->bus;
 
-	cldev->event_cb = NULL;
-
 	mutex_lock(&bus->device_lock);
 
 	if (!mei_cl_is_connected(cl)) {
-		dev_err(bus->dev, "Already disconnected");
+		dev_dbg(bus->dev, "Already disconnected");
 		err = 0;
 		goto out;
 	}
@@ -497,9 +536,6 @@ out:
 	mei_cl_flush_queues(cl, NULL);
 	mei_cl_unlink(cl);
 
-	kfree(cl);
-	cldev->cl = NULL;
-
 	mutex_unlock(&bus->device_lock);
 	return err;
 }
@@ -629,9 +665,13 @@ static int mei_cl_device_remove(struct device *dev)
 	if (!cldev || !dev->driver)
 		return 0;
 
-	if (cldev->event_cb) {
-		cldev->event_cb = NULL;
-		cancel_work_sync(&cldev->event_work);
+	if (cldev->rx_cb) {
+		cancel_work_sync(&cldev->rx_work);
+		cldev->rx_cb = NULL;
+	}
+	if (cldev->notif_cb) {
+		cancel_work_sync(&cldev->notif_work);
+		cldev->notif_cb = NULL;
 	}
 
 	cldrv = to_mei_cl_driver(dev->driver);
@@ -754,6 +794,7 @@ static void mei_cl_bus_dev_release(struct device *dev)
 
 	mei_me_cl_put(cldev->me_cl);
 	mei_dev_bus_put(cldev->bus);
+	kfree(cldev->cl);
 	kfree(cldev);
 }
 
@@ -786,17 +827,25 @@ static struct mei_cl_device *mei_cl_bus_dev_alloc(struct mei_device *bus,
 						  struct mei_me_client *me_cl)
 {
 	struct mei_cl_device *cldev;
+	struct mei_cl *cl;
 
 	cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL);
 	if (!cldev)
 		return NULL;
 
+	cl = mei_cl_allocate(bus);
+	if (!cl) {
+		kfree(cldev);
+		return NULL;
+	}
+
 	device_initialize(&cldev->dev);
 	cldev->dev.parent = bus->dev;
 	cldev->dev.bus    = &mei_cl_bus_type;
 	cldev->dev.type   = &mei_cl_device_type;
 	cldev->bus        = mei_dev_bus_get(bus);
 	cldev->me_cl      = mei_me_cl_get(me_cl);
+	cldev->cl         = cl;
 	mei_cl_bus_set_name(cldev);
 	cldev->is_added   = 0;
 	INIT_LIST_HEAD(&cldev->bus_list);

drivers/misc/mei/client.c

@@ -425,7 +425,7 @@ static inline void mei_io_list_free(struct mei_cl_cb *list, struct mei_cl *cl)
  *
  * @cl: host client
  * @length: size of the buffer
- * @type: operation type
+ * @fop_type: operation type
  * @fp: associated file pointer (might be NULL)
  *
  * Return: cb on success and NULL on failure
@@ -459,7 +459,7 @@ struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length,
  *
  * @cl: host client
  * @length: size of the buffer
- * @type: operation type
+ * @fop_type: operation type
  * @fp: associated file pointer (might be NULL)
  *
  * Return: cb on success and NULL on failure
@@ -571,7 +571,7 @@ void mei_cl_init(struct mei_cl *cl, struct mei_device *dev)
 	INIT_LIST_HEAD(&cl->rd_pending);
 	INIT_LIST_HEAD(&cl->link);
 	cl->writing_state = MEI_IDLE;
-	cl->state = MEI_FILE_INITIALIZING;
+	cl->state = MEI_FILE_UNINITIALIZED;
 	cl->dev = dev;
 }
 
@@ -672,7 +672,12 @@ int mei_cl_unlink(struct mei_cl *cl)
 
 	list_del_init(&cl->link);
 
-	cl->state = MEI_FILE_INITIALIZING;
+	cl->state = MEI_FILE_UNINITIALIZED;
+	cl->writing_state = MEI_IDLE;
+
+	WARN_ON(!list_empty(&cl->rd_completed) ||
+		!list_empty(&cl->rd_pending) ||
+		!list_empty(&cl->link));
 
 	return 0;
 }
@@ -686,7 +691,7 @@ void mei_host_client_init(struct mei_device *dev)
 
 	pm_runtime_mark_last_busy(dev->dev);
 	dev_dbg(dev->dev, "rpm: autosuspend\n");
-	pm_runtime_autosuspend(dev->dev);
+	pm_request_autosuspend(dev->dev);
 }
 
 /**
@@ -756,7 +761,7 @@ void mei_cl_set_disconnected(struct mei_cl *cl)
 	struct mei_device *dev = cl->dev;
 
 	if (cl->state == MEI_FILE_DISCONNECTED ||
-	    cl->state == MEI_FILE_INITIALIZING)
+	    cl->state <= MEI_FILE_INITIALIZING)
 		return;
 
 	cl->state = MEI_FILE_DISCONNECTED;
@@ -1598,18 +1603,17 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
  *
  * @cl: host client
  * @cb: write callback with filled data
- * @blocking: block until completed
  *
  * Return: number of bytes sent on success, <0 on failure.
  */
-int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
+int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
 {
 	struct mei_device *dev;
 	struct mei_msg_data *buf;
 	struct mei_msg_hdr mei_hdr;
 	int size;
 	int rets;
-
+	bool blocking;
 
 	if (WARN_ON(!cl || !cl->dev))
 		return -ENODEV;
@@ -1621,6 +1625,7 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
 
 	buf = &cb->buf;
 	size = buf->size;
+	blocking = cb->blocking;
 
 	cl_dbg(dev, cl, "size=%d\n", size);
 

drivers/misc/mei/client.h

@@ -219,7 +219,7 @@ int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb,
 int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp);
 int mei_cl_irq_read_msg(struct mei_cl *cl, struct mei_msg_hdr *hdr,
 			struct mei_cl_cb *cmpl_list);
-int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking);
+int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb);
 int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
 		     struct mei_cl_cb *cmpl_list);
 

drivers/misc/mei/hw-me-regs.h

@@ -122,6 +122,8 @@
 #define MEI_DEV_ID_SPT_H      0xA13A  /* Sunrise Point H */
 #define MEI_DEV_ID_SPT_H_2    0xA13B  /* Sunrise Point H 2 */
 
+#define MEI_DEV_ID_LBG        0xA1BA  /* Lewisburg (SPT) */
+
 #define MEI_DEV_ID_BXT_M      0x1A9A  /* Broxton M */
 #define MEI_DEV_ID_APL_I      0x5A9A  /* Apollo Lake I */
 

drivers/misc/mei/hw-me.c

@@ -246,6 +246,36 @@ static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev)
 	return hw->pg_state;
 }
 
+static inline u32 me_intr_src(u32 hcsr)
+{
+	return hcsr & H_CSR_IS_MASK;
+}
+
+/**
+ * me_intr_disable - disables mei device interrupts
+ *      using supplied hcsr register value.
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_disable(struct mei_device *dev, u32 hcsr)
+{
+	hcsr &= ~H_CSR_IE_MASK;
+	mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_intr_clear - clear and stop interrupts
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_clear(struct mei_device *dev, u32 hcsr)
+{
+	if (me_intr_src(hcsr))
+		mei_hcsr_write(dev, hcsr);
+}
+
 /**
  * mei_me_intr_clear - clear and stop interrupts
  *
@@ -255,8 +285,7 @@ static void mei_me_intr_clear(struct mei_device *dev)
 {
 	u32 hcsr = mei_hcsr_read(dev);
 
-	if (hcsr & H_CSR_IS_MASK)
-		mei_hcsr_write(dev, hcsr);
+	me_intr_clear(dev, hcsr);
 }
 /**
  * mei_me_intr_enable - enables mei device interrupts
@@ -280,8 +309,19 @@ static void mei_me_intr_disable(struct mei_device *dev)
 {
 	u32 hcsr = mei_hcsr_read(dev);
 
-	hcsr  &= ~H_CSR_IE_MASK;
-	mei_hcsr_set(dev, hcsr);
+	me_intr_disable(dev, hcsr);
+}
+
+/**
+ * mei_me_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_me_synchronize_irq(struct mei_device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+	synchronize_irq(pdev->irq);
 }
 
 /**
@@ -450,7 +490,7 @@ static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
 
 
 /**
- * mei_me_write_message - writes a message to mei device.
+ * mei_me_hbuf_write - writes a message to host hw buffer.
  *
  * @dev: the device structure
  * @header: mei HECI header of message
@@ -458,9 +498,9 @@ static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
  *
  * Return: -EIO if write has failed
  */
-static int mei_me_write_message(struct mei_device *dev,
-			struct mei_msg_hdr *header,
-			unsigned char *buf)
+static int mei_me_hbuf_write(struct mei_device *dev,
+			     struct mei_msg_hdr *header,
+			     const unsigned char *buf)
 {
 	unsigned long rem;
 	unsigned long length = header->length;
@@ -956,13 +996,14 @@ static void mei_me_pg_legacy_intr(struct mei_device *dev)
  * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler
  *
  * @dev: the device structure
+ * @intr_source: interrupt source
  */
-static void mei_me_d0i3_intr(struct mei_device *dev)
+static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 
 	if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT &&
-	    (hw->intr_source & H_D0I3C_IS)) {
+	    (intr_source & H_D0I3C_IS)) {
 		dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
 		if (hw->pg_state == MEI_PG_ON) {
 			hw->pg_state = MEI_PG_OFF;
@@ -981,7 +1022,7 @@ static void mei_me_d0i3_intr(struct mei_device *dev)
 		wake_up(&dev->wait_pg);
 	}
 
-	if (hw->pg_state == MEI_PG_ON && (hw->intr_source & H_IS)) {
+	if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) {
 		/*
 		 * HW sent some data and we are in D0i3, so
 		 * we got here because of HW initiated exit from D0i3.
@@ -996,13 +1037,14 @@ static void mei_me_d0i3_intr(struct mei_device *dev)
  * mei_me_pg_intr - perform pg processing in interrupt thread handler
  *
  * @dev: the device structure
+ * @intr_source: interrupt source
  */
-static void mei_me_pg_intr(struct mei_device *dev)
+static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 
 	if (hw->d0i3_supported)
-		mei_me_d0i3_intr(dev);
+		mei_me_d0i3_intr(dev, intr_source);
 	else
 		mei_me_pg_legacy_intr(dev);
 }
@@ -1121,19 +1163,16 @@ static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
 irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
 {
 	struct mei_device *dev = (struct mei_device *)dev_id;
-	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 hcsr;
 
 	hcsr = mei_hcsr_read(dev);
-	if (!(hcsr & H_CSR_IS_MASK))
+	if (!me_intr_src(hcsr))
 		return IRQ_NONE;
 
-	hw->intr_source = hcsr & H_CSR_IS_MASK;
-	dev_dbg(dev->dev, "interrupt source 0x%08X.\n", hw->intr_source);
-
-	/* clear H_IS and H_D0I3C_IS bits in H_CSR to clear the interrupts */
-	mei_hcsr_write(dev, hcsr);
+	dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr));
 
+	/* disable interrupts on device */
+	me_intr_disable(dev, hcsr);
 	return IRQ_WAKE_THREAD;
 }
 
@@ -1152,11 +1191,16 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
 	struct mei_device *dev = (struct mei_device *) dev_id;
 	struct mei_cl_cb complete_list;
 	s32 slots;
+	u32 hcsr;
 	int rets = 0;
 
 	dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n");
 	/* initialize our complete list */
 	mutex_lock(&dev->device_lock);
+
+	hcsr = mei_hcsr_read(dev);
+	me_intr_clear(dev, hcsr);
+
 	mei_io_list_init(&complete_list);
 
 	/* check if ME wants a reset */
@@ -1166,7 +1210,7 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
 		goto end;
 	}
 
-	mei_me_pg_intr(dev);
+	mei_me_pg_intr(dev, me_intr_src(hcsr));
 
 	/*  check if we need to start the dev */
 	if (!mei_host_is_ready(dev)) {
@@ -1216,6 +1260,7 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
 
 end:
 	dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
+	mei_me_intr_enable(dev);
 	mutex_unlock(&dev->device_lock);
 	return IRQ_HANDLED;
 }
@@ -1238,12 +1283,13 @@ static const struct mei_hw_ops mei_me_hw_ops = {
 	.intr_clear = mei_me_intr_clear,
 	.intr_enable = mei_me_intr_enable,
 	.intr_disable = mei_me_intr_disable,
+	.synchronize_irq = mei_me_synchronize_irq,
 
 	.hbuf_free_slots = mei_me_hbuf_empty_slots,
 	.hbuf_is_ready = mei_me_hbuf_is_empty,
 	.hbuf_max_len = mei_me_hbuf_max_len,
 
-	.write = mei_me_write_message,
+	.write = mei_me_hbuf_write,
 
 	.rdbuf_full_slots = mei_me_count_full_read_slots,
 	.read_hdr = mei_me_mecbrw_read,

drivers/misc/mei/hw-me.h

@@ -51,14 +51,12 @@ struct mei_cfg {
  *
  * @cfg: per device generation config and ops
  * @mem_addr: io memory address
- * @intr_source: interrupt source
  * @pg_state: power gating state
  * @d0i3_supported: di03 support
  */
 struct mei_me_hw {
 	const struct mei_cfg *cfg;
 	void __iomem *mem_addr;
-	u32 intr_source;
 	enum mei_pg_state pg_state;
 	bool d0i3_supported;
 };

drivers/misc/mei/hw-txe.c

@@ -19,7 +19,7 @@
 #include <linux/ktime.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
-#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
 
 #include <linux/mei.h>
@@ -440,6 +440,18 @@ static void mei_txe_intr_enable(struct mei_device *dev)
 	mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK);
 }
 
+/**
+ * mei_txe_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_synchronize_irq(struct mei_device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+	synchronize_irq(pdev->irq);
+}
+
 /**
  * mei_txe_pending_interrupts - check if there are pending interrupts
  *	only Aliveness, Input ready, and output doorbell are of relevance
@@ -691,7 +703,8 @@ static void mei_txe_hw_config(struct mei_device *dev)
  */
 
 static int mei_txe_write(struct mei_device *dev,
-		struct mei_msg_hdr *header, unsigned char *buf)
+			 struct mei_msg_hdr *header,
+			 const unsigned char *buf)
 {
 	struct mei_txe_hw *hw = to_txe_hw(dev);
 	unsigned long rem;
@@ -1167,6 +1180,7 @@ static const struct mei_hw_ops mei_txe_hw_ops = {
 	.intr_clear = mei_txe_intr_clear,
 	.intr_enable = mei_txe_intr_enable,
 	.intr_disable = mei_txe_intr_disable,
+	.synchronize_irq = mei_txe_synchronize_irq,
 
 	.hbuf_free_slots = mei_txe_hbuf_empty_slots,
 	.hbuf_is_ready = mei_txe_is_input_ready,

drivers/misc/mei/init.c

@@ -122,6 +122,10 @@ int mei_reset(struct mei_device *dev)
 			 mei_dev_state_str(state), fw_sts_str);
 	}
 
+	mei_clear_interrupts(dev);
+
+	mei_synchronize_irq(dev);
+
 	/* we're already in reset, cancel the init timer
 	 * if the reset was called due the hbm protocol error
 	 * we need to call it before hw start
@@ -273,8 +277,6 @@ int mei_restart(struct mei_device *dev)
 
 	mutex_lock(&dev->device_lock);
 
-	mei_clear_interrupts(dev);
-
 	dev->dev_state = MEI_DEV_POWER_UP;
 	dev->reset_count = 0;
 

drivers/misc/mei/interrupt.c

@@ -118,7 +118,6 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
 
 	if (!mei_cl_is_connected(cl)) {
 		cl_dbg(dev, cl, "not connected\n");
-		list_move_tail(&cb->list, &complete_list->list);
 		cb->status = -ENODEV;
 		goto discard;
 	}
@@ -128,8 +127,6 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
 	if (buf_sz < cb->buf_idx) {
 		cl_err(dev, cl, "message is too big len %d idx %zu\n",
 		       mei_hdr->length, cb->buf_idx);
-
-		list_move_tail(&cb->list, &complete_list->list);
 		cb->status = -EMSGSIZE;
 		goto discard;
 	}
@@ -137,8 +134,6 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
 	if (cb->buf.size < buf_sz) {
 		cl_dbg(dev, cl, "message overflow. size %zu len %d idx %zu\n",
 			cb->buf.size, mei_hdr->length, cb->buf_idx);
-
-		list_move_tail(&cb->list, &complete_list->list);
 		cb->status = -EMSGSIZE;
 		goto discard;
 	}
@@ -158,6 +153,8 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
 	return 0;
 
 discard:
+	if (cb)
+		list_move_tail(&cb->list, &complete_list->list);
 	mei_irq_discard_msg(dev, mei_hdr);
 	return 0;
 }

drivers/misc/mei/main.c

@@ -322,7 +322,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
 		goto out;
 	}
 
-	rets = mei_cl_write(cl, cb, false);
+	rets = mei_cl_write(cl, cb);
 out:
 	mutex_unlock(&dev->device_lock);
 	return rets;
@@ -653,7 +653,7 @@ static int mei_fasync(int fd, struct file *file, int band)
 }
 
 /**
- * fw_status_show - mei device attribute show method
+ * fw_status_show - mei device fw_status attribute show method
  *
  * @device: device pointer
  * @attr: attribute pointer
@@ -684,8 +684,49 @@ static ssize_t fw_status_show(struct device *device,
 }
 static DEVICE_ATTR_RO(fw_status);
 
+/**
+ * hbm_ver_show - display HBM protocol version negotiated with FW
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf:  char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t hbm_ver_show(struct device *device,
+			    struct device_attribute *attr, char *buf)
+{
+	struct mei_device *dev = dev_get_drvdata(device);
+	struct hbm_version ver;
+
+	mutex_lock(&dev->device_lock);
+	ver = dev->version;
+	mutex_unlock(&dev->device_lock);
+
+	return sprintf(buf, "%u.%u\n", ver.major_version, ver.minor_version);
+}
+static DEVICE_ATTR_RO(hbm_ver);
+
+/**
+ * hbm_ver_drv_show - display HBM protocol version advertised by driver
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf:  char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t hbm_ver_drv_show(struct device *device,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u.%u\n", HBM_MAJOR_VERSION, HBM_MINOR_VERSION);
+}
+static DEVICE_ATTR_RO(hbm_ver_drv);
+
 static struct attribute *mei_attrs[] = {
 	&dev_attr_fw_status.attr,
+	&dev_attr_hbm_ver.attr,
+	&dev_attr_hbm_ver_drv.attr,
 	NULL
 };
 ATTRIBUTE_GROUPS(mei);

drivers/misc/mei/mei_dev.h

@@ -55,7 +55,8 @@ extern const uuid_le mei_amthif_guid;
 
 /* File state */
 enum file_state {
-	MEI_FILE_INITIALIZING = 0,
+	MEI_FILE_UNINITIALIZED = 0,
+	MEI_FILE_INITIALIZING,
 	MEI_FILE_CONNECTING,
 	MEI_FILE_CONNECTED,
 	MEI_FILE_DISCONNECTING,
@@ -109,6 +110,21 @@ enum mei_cb_file_ops {
 	MEI_FOP_NOTIFY_STOP,
 };
 
+/**
+ * enum mei_cl_io_mode - io mode between driver and fw
+ *
+ * @MEI_CL_IO_TX_BLOCKING: send is blocking
+ * @MEI_CL_IO_TX_INTERNAL: internal communication between driver and FW
+ *
+ * @MEI_CL_IO_RX_NONBLOCK: recv is non-blocking
+ */
+enum mei_cl_io_mode {
+	MEI_CL_IO_TX_BLOCKING = BIT(0),
+	MEI_CL_IO_TX_INTERNAL = BIT(1),
+
+	MEI_CL_IO_RX_NONBLOCK = BIT(2),
+};
+
 /*
  * Intel MEI message data struct
  */
@@ -169,6 +185,7 @@ struct mei_cl;
  * @fp: pointer to file structure
  * @status: io status of the cb
  * @internal: communication between driver and FW flag
+ * @blocking: transmission blocking mode
  * @completed: the transfer or reception has completed
  */
 struct mei_cl_cb {
@@ -180,6 +197,7 @@ struct mei_cl_cb {
 	const struct file *fp;
 	int status;
 	u32 internal:1;
+	u32 blocking:1;
 	u32 completed:1;
 };
 
@@ -253,6 +271,7 @@ struct mei_cl {
  * @intr_clear       : clear pending interrupts
  * @intr_enable      : enable interrupts
  * @intr_disable     : disable interrupts
+ * @synchronize_irq  : synchronize irqs
  *
  * @hbuf_free_slots  : query for write buffer empty slots
  * @hbuf_is_ready    : query if write buffer is empty
@@ -274,7 +293,6 @@ struct mei_hw_ops {
 	int (*hw_start)(struct mei_device *dev);
 	void (*hw_config)(struct mei_device *dev);
 
-
 	int (*fw_status)(struct mei_device *dev, struct mei_fw_status *fw_sts);
 	enum mei_pg_state (*pg_state)(struct mei_device *dev);
 	bool (*pg_in_transition)(struct mei_device *dev);
@@ -283,14 +301,14 @@ struct mei_hw_ops {
 	void (*intr_clear)(struct mei_device *dev);
 	void (*intr_enable)(struct mei_device *dev);
 	void (*intr_disable)(struct mei_device *dev);
+	void (*synchronize_irq)(struct mei_device *dev);
 
 	int (*hbuf_free_slots)(struct mei_device *dev);
 	bool (*hbuf_is_ready)(struct mei_device *dev);
 	size_t (*hbuf_max_len)(const struct mei_device *dev);
-
 	int (*write)(struct mei_device *dev,
 		     struct mei_msg_hdr *hdr,
-		     unsigned char *buf);
+		     const unsigned char *buf);
 
 	int (*rdbuf_full_slots)(struct mei_device *dev);
 
@@ -304,8 +322,9 @@ void mei_cl_bus_rescan(struct mei_device *bus);
 void mei_cl_bus_rescan_work(struct work_struct *work);
 void mei_cl_bus_dev_fixup(struct mei_cl_device *dev);
 ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
-			bool blocking);
-ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length);
+		      unsigned int mode);
+ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length,
+		      unsigned int mode);
 bool mei_cl_bus_rx_event(struct mei_cl *cl);
 bool mei_cl_bus_notify_event(struct mei_cl *cl);
 void mei_cl_bus_remove_devices(struct mei_device *bus);
@@ -627,6 +646,11 @@ static inline void mei_disable_interrupts(struct mei_device *dev)
 	dev->ops->intr_disable(dev);
 }
 
+static inline void mei_synchronize_irq(struct mei_device *dev)
+{
+	dev->ops->synchronize_irq(dev);
+}
+
 static inline bool mei_host_is_ready(struct mei_device *dev)
 {
 	return dev->ops->host_is_ready(dev);
@@ -652,7 +676,7 @@ static inline size_t mei_hbuf_max_len(const struct mei_device *dev)
 }
 
 static inline int mei_write_message(struct mei_device *dev,
-			struct mei_msg_hdr *hdr, void *buf)
+				    struct mei_msg_hdr *hdr, const void *buf)
 {
 	return dev->ops->write(dev, hdr, buf);
 }

drivers/misc/mei/pci-me.c

@@ -87,6 +87,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, mei_me_pch8_cfg)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_sps_cfg)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_sps_cfg)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_LBG, mei_me_pch8_cfg)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, mei_me_pch8_cfg)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, mei_me_pch8_cfg)},

drivers/nfc/mei_phy.c

@@ -297,35 +297,34 @@ static int mei_nfc_recv(struct nfc_mei_phy *phy, u8 *buf, size_t length)
 }
 
 
-static void nfc_mei_event_cb(struct mei_cl_device *cldev, u32 events,
-			     void *context)
+static void nfc_mei_rx_cb(struct mei_cl_device *cldev)
 {
-	struct nfc_mei_phy *phy = context;
+	struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev);
+	struct sk_buff *skb;
+	int reply_size;
 
-	if (phy->hard_fault != 0)
+	if (!phy)
 		return;
 
-	if (events & BIT(MEI_CL_EVENT_RX)) {
-		struct sk_buff *skb;
-		int reply_size;
+	if (phy->hard_fault != 0)
+		return;
 
-		skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL);
-		if (!skb)
-			return;
+	skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL);
+	if (!skb)
+		return;
 
-		reply_size = mei_nfc_recv(phy, skb->data, MEI_NFC_MAX_READ);
-		if (reply_size < MEI_NFC_HEADER_SIZE) {
-			kfree_skb(skb);
-			return;
-		}
+	reply_size = mei_nfc_recv(phy, skb->data, MEI_NFC_MAX_READ);
+	if (reply_size < MEI_NFC_HEADER_SIZE) {
+		kfree_skb(skb);
+		return;
+	}
 
-		skb_put(skb, reply_size);
-		skb_pull(skb, MEI_NFC_HEADER_SIZE);
+	skb_put(skb, reply_size);
+	skb_pull(skb, MEI_NFC_HEADER_SIZE);
 
-		MEI_DUMP_SKB_IN("mei frame read", skb);
+	MEI_DUMP_SKB_IN("mei frame read", skb);
 
-		nfc_hci_recv_frame(phy->hdev, skb);
-	}
+	nfc_hci_recv_frame(phy->hdev, skb);
 }
 
 static int nfc_mei_phy_enable(void *phy_id)
@@ -356,8 +355,7 @@ static int nfc_mei_phy_enable(void *phy_id)
 		goto err;
 	}
 
-	r = mei_cldev_register_event_cb(phy->cldev, BIT(MEI_CL_EVENT_RX),
-				     nfc_mei_event_cb, phy);
+	r = mei_cldev_register_rx_cb(phy->cldev, nfc_mei_rx_cb);
 	if (r) {
 		pr_err("Event cb registration failed %d\n", r);
 		goto err;

drivers/nfc/microread/mei.c

@@ -82,28 +82,7 @@ static struct mei_cl_driver microread_driver = {
 	.remove = microread_mei_remove,
 };
 
-static int microread_mei_init(void)
-{
-	int r;
-
-	pr_debug(DRIVER_DESC ": %s\n", __func__);
-
-	r = mei_cldev_driver_register(&microread_driver);
-	if (r) {
-		pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n");
-		return r;
-	}
-
-	return 0;
-}
-
-static void microread_mei_exit(void)
-{
-	mei_cldev_driver_unregister(&microread_driver);
-}
-
-module_init(microread_mei_init);
-module_exit(microread_mei_exit);
+module_mei_cl_driver(microread_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRIVER_DESC);

drivers/nfc/pn544/mei.c

@@ -82,28 +82,7 @@ static struct mei_cl_driver pn544_driver = {
 	.remove = pn544_mei_remove,
 };
 
-static int pn544_mei_init(void)
-{
-	int r;
-
-	pr_debug(DRIVER_DESC ": %s\n", __func__);
-
-	r = mei_cldev_driver_register(&pn544_driver);
-	if (r) {
-		pr_err(PN544_DRIVER_NAME ": driver registration failed\n");
-		return r;
-	}
-
-	return 0;
-}
-
-static void pn544_mei_exit(void)
-{
-	mei_cldev_driver_unregister(&pn544_driver);
-}
-
-module_init(pn544_mei_init);
-module_exit(pn544_mei_exit);
+module_mei_cl_driver(pn544_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRIVER_DESC);

drivers/nvmem/Kconfig

@@ -35,6 +35,16 @@ config NVMEM_LPC18XX_EEPROM
 	  To compile this driver as a module, choose M here: the module
 	  will be called nvmem_lpc18xx_eeprom.
 
+config NVMEM_LPC18XX_OTP
+	tristate "NXP LPC18XX OTP Memory Support"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say Y here to include support for NXP LPC18xx OTP memory found on
+	  all LPC18xx and LPC43xx devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_lpc18xx_otp.
+
 config NVMEM_MXS_OCOTP
 	tristate "Freescale MXS On-Chip OTP Memory Support"
 	depends on ARCH_MXS || COMPILE_TEST
@@ -80,6 +90,18 @@ config ROCKCHIP_EFUSE
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_rockchip_efuse.
 
+config NVMEM_BCM_OCOTP
+	tristate "Broadcom On-Chip OTP Controller support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM
+	default ARCH_BCM_IPROC
+	help
+	  Say y here to enable read/write access to the Broadcom OTP
+	  controller.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-bcm-ocotp.
+
 config NVMEM_SUNXI_SID
 	tristate "Allwinner SoCs SID support"
 	depends on ARCH_SUNXI

drivers/nvmem/Makefile

@@ -6,10 +6,14 @@ obj-$(CONFIG_NVMEM)		+= nvmem_core.o
 nvmem_core-y			:= core.o
 
 # Devices
+obj-$(CONFIG_NVMEM_BCM_OCOTP)	+= nvmem-bcm-ocotp.o
+nvmem-bcm-ocotp-y		:= bcm-ocotp.o
 obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-imx-ocotp.o
 nvmem-imx-ocotp-y		:= imx-ocotp.o
 obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
 nvmem_lpc18xx_eeprom-y	:= lpc18xx_eeprom.o
+obj-$(CONFIG_NVMEM_LPC18XX_OTP)	+= nvmem_lpc18xx_otp.o
+nvmem_lpc18xx_otp-y		:= lpc18xx_otp.o
 obj-$(CONFIG_NVMEM_MXS_OCOTP)	+= nvmem-mxs-ocotp.o
 nvmem-mxs-ocotp-y		:= mxs-ocotp.o
 obj-$(CONFIG_MTK_EFUSE)		+= nvmem_mtk-efuse.o

drivers/nvmem/bcm-ocotp.c

@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+/*
+ * # of tries for OTP Status. The time to execute a command varies. The slowest
+ * commands are writes which also vary based on the # of bits turned on. Writing
+ * 0xffffffff takes ~3800 us.
+ */
+#define OTPC_RETRIES                 5000
+
+/* Sequence to enable OTP program */
+#define OTPC_PROG_EN_SEQ             { 0xf, 0x4, 0x8, 0xd }
+
+/* OTPC Commands */
+#define OTPC_CMD_READ                0x0
+#define OTPC_CMD_OTP_PROG_ENABLE     0x2
+#define OTPC_CMD_OTP_PROG_DISABLE    0x3
+#define OTPC_CMD_PROGRAM             0xA
+
+/* OTPC Status Bits */
+#define OTPC_STAT_CMD_DONE           BIT(1)
+#define OTPC_STAT_PROG_OK            BIT(2)
+
+/* OTPC register definition */
+#define OTPC_MODE_REG_OFFSET         0x0
+#define OTPC_MODE_REG_OTPC_MODE      0
+#define OTPC_COMMAND_OFFSET          0x4
+#define OTPC_COMMAND_COMMAND_WIDTH   6
+#define OTPC_CMD_START_OFFSET        0x8
+#define OTPC_CMD_START_START         0
+#define OTPC_CPU_STATUS_OFFSET       0xc
+#define OTPC_CPUADDR_REG_OFFSET      0x28
+#define OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH 16
+#define OTPC_CPU_WRITE_REG_OFFSET    0x2c
+
+#define OTPC_CMD_MASK  (BIT(OTPC_COMMAND_COMMAND_WIDTH) - 1)
+#define OTPC_ADDR_MASK (BIT(OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH) - 1)
+
+
+struct otpc_map {
+	/* in words. */
+	u32 otpc_row_size;
+	/* 128 bit row / 4 words support. */
+	u16 data_r_offset[4];
+	/* 128 bit row / 4 words support. */
+	u16 data_w_offset[4];
+};
+
+static struct otpc_map otp_map = {
+	.otpc_row_size = 1,
+	.data_r_offset = {0x10},
+	.data_w_offset = {0x2c},
+};
+
+static struct otpc_map otp_map_v2 = {
+	.otpc_row_size = 2,
+	.data_r_offset = {0x10, 0x5c},
+	.data_w_offset = {0x2c, 0x64},
+};
+
+struct otpc_priv {
+	struct device       *dev;
+	void __iomem        *base;
+	struct otpc_map     *map;
+	struct nvmem_config *config;
+};
+
+static inline void set_command(void __iomem *base, u32 command)
+{
+	writel(command & OTPC_CMD_MASK, base + OTPC_COMMAND_OFFSET);
+}
+
+static inline void set_cpu_address(void __iomem *base, u32 addr)
+{
+	writel(addr & OTPC_ADDR_MASK, base + OTPC_CPUADDR_REG_OFFSET);
+}
+
+static inline void set_start_bit(void __iomem *base)
+{
+	writel(1 << OTPC_CMD_START_START, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void reset_start_bit(void __iomem *base)
+{
+	writel(0, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void write_cpu_data(void __iomem *base, u32 value)
+{
+	writel(value, base + OTPC_CPU_WRITE_REG_OFFSET);
+}
+
+static int poll_cpu_status(void __iomem *base, u32 value)
+{
+	u32 status;
+	u32 retries;
+
+	for (retries = 0; retries < OTPC_RETRIES; retries++) {
+		status = readl(base + OTPC_CPU_STATUS_OFFSET);
+		if (status & value)
+			break;
+		udelay(1);
+	}
+	if (retries == OTPC_RETRIES)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int enable_ocotp_program(void __iomem *base)
+{
+	static const u32 vals[] = OTPC_PROG_EN_SEQ;
+	int i;
+	int ret;
+
+	/* Write the magic sequence to enable programming */
+	set_command(base, OTPC_CMD_OTP_PROG_ENABLE);
+	for (i = 0; i < ARRAY_SIZE(vals); i++) {
+		write_cpu_data(base, vals[i]);
+		set_start_bit(base);
+		ret = poll_cpu_status(base, OTPC_STAT_CMD_DONE);
+		reset_start_bit(base);
+		if (ret)
+			return ret;
+	}
+
+	return poll_cpu_status(base, OTPC_STAT_PROG_OK);
+}
+
+static int disable_ocotp_program(void __iomem *base)
+{
+	int ret;
+
+	set_command(base, OTPC_CMD_OTP_PROG_DISABLE);
+	set_start_bit(base);
+	ret = poll_cpu_status(base, OTPC_STAT_PROG_OK);
+	reset_start_bit(base);
+
+	return ret;
+}
+
+static int bcm_otpc_read(void *context, unsigned int offset, void *val,
+	size_t bytes)
+{
+	struct otpc_priv *priv = context;
+	u32 *buf = val;
+	u32 bytes_read;
+	u32 address = offset / priv->config->word_size;
+	int i, ret;
+
+	for (bytes_read = 0; bytes_read < bytes;) {
+		set_command(priv->base, OTPC_CMD_READ);
+		set_cpu_address(priv->base, address++);
+		set_start_bit(priv->base);
+		ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+		if (ret) {
+			dev_err(priv->dev, "otp read error: 0x%x", ret);
+			return -EIO;
+		}
+
+		for (i = 0; i < priv->map->otpc_row_size; i++) {
+			*buf++ = readl(priv->base +
+					priv->map->data_r_offset[i]);
+			bytes_read += sizeof(*buf);
+		}
+
+		reset_start_bit(priv->base);
+	}
+
+	return 0;
+}
+
+static int bcm_otpc_write(void *context, unsigned int offset, void *val,
+	size_t bytes)
+{
+	struct otpc_priv *priv = context;
+	u32 *buf = val;
+	u32 bytes_written;
+	u32 address = offset / priv->config->word_size;
+	int i, ret;
+
+	if (offset % priv->config->word_size)
+		return -EINVAL;
+
+	ret = enable_ocotp_program(priv->base);
+	if (ret)
+		return -EIO;
+
+	for (bytes_written = 0; bytes_written < bytes;) {
+		set_command(priv->base, OTPC_CMD_PROGRAM);
+		set_cpu_address(priv->base, address++);
+		for (i = 0; i < priv->map->otpc_row_size; i++) {
+			writel(*buf, priv->base + priv->map->data_r_offset[i]);
+			buf++;
+			bytes_written += sizeof(*buf);
+		}
+		set_start_bit(priv->base);
+		ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+		reset_start_bit(priv->base);
+		if (ret) {
+			dev_err(priv->dev, "otp write error: 0x%x", ret);
+			return -EIO;
+		}
+	}
+
+	disable_ocotp_program(priv->base);
+
+	return 0;
+}
+
+static struct nvmem_config bcm_otpc_nvmem_config = {
+	.name = "bcm-ocotp",
+	.read_only = false,
+	.word_size = 4,
+	.stride = 4,
+	.owner = THIS_MODULE,
+	.reg_read = bcm_otpc_read,
+	.reg_write = bcm_otpc_write,
+};
+
+static const struct of_device_id bcm_otpc_dt_ids[] = {
+	{ .compatible = "brcm,ocotp" },
+	{ .compatible = "brcm,ocotp-v2" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_otpc_dt_ids);
+
+static int bcm_otpc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node;
+	struct resource *res;
+	struct otpc_priv *priv;
+	struct nvmem_device *nvmem;
+	int err;
+	u32 num_words;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (of_device_is_compatible(dev->of_node, "brcm,ocotp"))
+		priv->map = &otp_map;
+	else if (of_device_is_compatible(dev->of_node, "brcm,ocotp-v2"))
+		priv->map = &otp_map_v2;
+	else {
+		dev_err(&pdev->dev,
+			"%s otpc config map not defined\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Get OTP base address register. */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(priv->base);
+	}
+
+	/* Enable CPU access to OTPC. */
+	writel(readl(priv->base + OTPC_MODE_REG_OFFSET) |
+		BIT(OTPC_MODE_REG_OTPC_MODE),
+		priv->base + OTPC_MODE_REG_OFFSET);
+	reset_start_bit(priv->base);
+
+	/* Read size of memory in words. */
+	err = of_property_read_u32(dn, "brcm,ocotp-size", &num_words);
+	if (err) {
+		dev_err(dev, "size parameter not specified\n");
+		return -EINVAL;
+	} else if (num_words == 0) {
+		dev_err(dev, "size must be > 0\n");
+		return -EINVAL;
+	}
+
+	bcm_otpc_nvmem_config.size = 4 * num_words;
+	bcm_otpc_nvmem_config.dev = dev;
+	bcm_otpc_nvmem_config.priv = priv;
+
+	if (of_device_is_compatible(dev->of_node, "brcm,ocotp-v2")) {
+		bcm_otpc_nvmem_config.word_size = 8;
+		bcm_otpc_nvmem_config.stride = 8;
+	}
+
+	priv->config = &bcm_otpc_nvmem_config;
+
+	nvmem = nvmem_register(&bcm_otpc_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(dev, "error registering nvmem config\n");
+		return PTR_ERR(nvmem);
+	}
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int bcm_otpc_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static struct platform_driver bcm_otpc_driver = {
+	.probe	= bcm_otpc_probe,
+	.remove	= bcm_otpc_remove,
+	.driver = {
+		.name	= "brcm-otpc",
+		.of_match_table = bcm_otpc_dt_ids,
+	},
+};
+module_platform_driver(bcm_otpc_driver);
+
+MODULE_DESCRIPTION("Broadcom OTPC driver");
+MODULE_LICENSE("GPL v2");

drivers/nvmem/lpc18xx_otp.c

@@ -0,0 +1,124 @@
+/*
+ * NXP LPC18xx/43xx OTP memory NVMEM driver
+ *
+ * Copyright (c) 2016 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on the imx ocotp driver,
+ * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * TODO: add support for writing OTP register via API in boot ROM.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * LPC18xx OTP memory contains 4 banks with 4 32-bit words. Bank 0 starts
+ * at offset 0 from the base.
+ *
+ * Bank 0 contains the part ID for Flashless devices and is reseverd for
+ * devices with Flash.
+ * Bank 1/2 is generale purpose or AES key storage for secure devices.
+ * Bank 3 contains control data, USB ID and generale purpose words.
+ */
+#define LPC18XX_OTP_NUM_BANKS		4
+#define LPC18XX_OTP_WORDS_PER_BANK	4
+#define LPC18XX_OTP_WORD_SIZE		sizeof(u32)
+#define LPC18XX_OTP_SIZE		(LPC18XX_OTP_NUM_BANKS * \
+					 LPC18XX_OTP_WORDS_PER_BANK * \
+					 LPC18XX_OTP_WORD_SIZE)
+
+struct lpc18xx_otp {
+	void __iomem *base;
+};
+
+static int lpc18xx_otp_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct lpc18xx_otp *otp = context;
+	unsigned int count = bytes >> 2;
+	u32 index = offset >> 2;
+	u32 *buf = val;
+	int i;
+
+	if (count > (LPC18XX_OTP_SIZE - index))
+		count = LPC18XX_OTP_SIZE - index;
+
+	for (i = index; i < (index + count); i++)
+		*buf++ = readl(otp->base + i * LPC18XX_OTP_WORD_SIZE);
+
+	return 0;
+}
+
+static struct nvmem_config lpc18xx_otp_nvmem_config = {
+	.name = "lpc18xx-otp",
+	.read_only = true,
+	.word_size = LPC18XX_OTP_WORD_SIZE,
+	.stride = LPC18XX_OTP_WORD_SIZE,
+	.owner = THIS_MODULE,
+	.reg_read = lpc18xx_otp_read,
+};
+
+static int lpc18xx_otp_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct lpc18xx_otp *otp;
+	struct resource *res;
+
+	otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	otp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	lpc18xx_otp_nvmem_config.size = LPC18XX_OTP_SIZE;
+	lpc18xx_otp_nvmem_config.dev = &pdev->dev;
+	lpc18xx_otp_nvmem_config.priv = otp;
+
+	nvmem = nvmem_register(&lpc18xx_otp_nvmem_config);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int lpc18xx_otp_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id lpc18xx_otp_dt_ids[] = {
+	{ .compatible = "nxp,lpc1850-otp" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_otp_dt_ids);
+
+static struct platform_driver lpc18xx_otp_driver = {
+	.probe	= lpc18xx_otp_probe,
+	.remove	= lpc18xx_otp_remove,
+	.driver = {
+		.name	= "lpc18xx_otp",
+		.of_match_table = lpc18xx_otp_dt_ids,
+	},
+};
+module_platform_driver(lpc18xx_otp_driver);
+
+MODULE_AUTHOR("Joachim Eastwoood <manabian@gmail.com>");
+MODULE_DESCRIPTION("NXP LPC18xx OTP NVMEM driver");
+MODULE_LICENSE("GPL v2");

drivers/of/overlay.c

@@ -58,6 +58,41 @@ struct of_overlay {
 static int of_overlay_apply_one(struct of_overlay *ov,
 		struct device_node *target, const struct device_node *overlay);
 
+static BLOCKING_NOTIFIER_HEAD(of_overlay_chain);
+
+int of_overlay_notifier_register(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&of_overlay_chain, nb);
+}
+EXPORT_SYMBOL_GPL(of_overlay_notifier_register);
+
+int of_overlay_notifier_unregister(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&of_overlay_chain, nb);
+}
+EXPORT_SYMBOL_GPL(of_overlay_notifier_unregister);
+
+static int of_overlay_notify(struct of_overlay *ov,
+			     enum of_overlay_notify_action action)
+{
+	struct of_overlay_notify_data nd;
+	int i, ret;
+
+	for (i = 0; i < ov->count; i++) {
+		struct of_overlay_info *ovinfo = &ov->ovinfo_tab[i];
+
+		nd.target = ovinfo->target;
+		nd.overlay = ovinfo->overlay;
+
+		ret = blocking_notifier_call_chain(&of_overlay_chain,
+						   action, &nd);
+		if (ret)
+			return notifier_to_errno(ret);
+	}
+
+	return 0;
+}
+
 static int of_overlay_apply_single_property(struct of_overlay *ov,
 		struct device_node *target, struct property *prop)
 {
@@ -368,6 +403,13 @@ int of_overlay_create(struct device_node *tree)
 		goto err_free_idr;
 	}
 
+	err = of_overlay_notify(ov, OF_OVERLAY_PRE_APPLY);
+	if (err < 0) {
+		pr_err("%s: Pre-apply notifier failed (err=%d)\n",
+		       __func__, err);
+		goto err_free_idr;
+	}
+
 	/* apply the overlay */
 	err = of_overlay_apply(ov);
 	if (err)
@@ -382,6 +424,8 @@ int of_overlay_create(struct device_node *tree)
 	/* add to the tail of the overlay list */
 	list_add_tail(&ov->node, &ov_list);
 
+	of_overlay_notify(ov, OF_OVERLAY_POST_APPLY);
+
 	mutex_unlock(&of_mutex);
 
 	return id;
@@ -498,9 +542,10 @@ int of_overlay_destroy(int id)
 		goto out;
 	}
 
-
+	of_overlay_notify(ov, OF_OVERLAY_PRE_REMOVE);
 	list_del(&ov->node);
 	__of_changeset_revert(&ov->cset);
+	of_overlay_notify(ov, OF_OVERLAY_POST_REMOVE);
 	of_free_overlay_info(ov);
 	idr_remove(&ov_idr, id);
 	of_changeset_destroy(&ov->cset);

drivers/platform/goldfish/goldfish_pipe.c

@@ -308,10 +308,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 		 * returns a small amount, then there's no need to pin that
 		 * much memory to the process.
 		 */
-		down_read(&current->mm->mmap_sem);
-		ret = get_user_pages(address, 1, is_write ? 0 : FOLL_WRITE,
-				&page, NULL);
-		up_read(&current->mm->mmap_sem);
+		ret = get_user_pages_unlocked(address, 1, &page,
+				is_write ? 0 : FOLL_WRITE);
 		if (ret < 0)
 			break;
 

drivers/s390/char/sclp_ctl.c

@@ -10,7 +10,7 @@
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
 #include <linux/gfp.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/ioctl.h>
 #include <linux/fs.h>
 #include <asm/compat.h>
@@ -126,4 +126,4 @@ static struct miscdevice sclp_ctl_device = {
 	.name = "sclp",
 	.fops = &sclp_ctl_fops,
 };
-module_misc_device(sclp_ctl_device);
+builtin_misc_device(sclp_ctl_device);

drivers/thunderbolt/nhi_regs.h

@@ -1,11 +1,11 @@
 /*
- * Thunderbolt Cactus Ridge driver - NHI registers
+ * Thunderbolt driver - NHI registers
  *
  * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
  */
 
-#ifndef DSL3510_REGS_H_
-#define DSL3510_REGS_H_
+#ifndef NHI_REGS_H_
+#define NHI_REGS_H_
 
 #include <linux/types.h>
 

drivers/uio/Kconfig

@@ -155,4 +155,13 @@ config UIO_MF624
 
 	  If you compile this as a module, it will be called uio_mf624.
 
+config UIO_HV_GENERIC
+	tristate "Generic driver for Hyper-V VMBus"
+	depends on HYPERV
+	help
+	  Generic driver that you can bind, dynamically, to any
+	  Hyper-V VMBus device. It is useful to provide direct access
+	  to network and storage devices from userspace.
+
+	  If you compile this as a module, it will be called uio_hv_generic.
 endif

drivers/uio/Makefile

@@ -9,3 +9,4 @@ obj-$(CONFIG_UIO_NETX)	+= uio_netx.o
 obj-$(CONFIG_UIO_PRUSS)         += uio_pruss.o
 obj-$(CONFIG_UIO_MF624)         += uio_mf624.o
 obj-$(CONFIG_UIO_FSL_ELBC_GPCM)	+= uio_fsl_elbc_gpcm.o
+obj-$(CONFIG_UIO_HV_GENERIC)	+= uio_hv_generic.o

drivers/uio/uio_hv_generic.c

@@ -0,0 +1,218 @@
+/*
+ * uio_hv_generic - generic UIO driver for VMBus
+ *
+ * Copyright (c) 2013-2016 Brocade Communications Systems, Inc.
+ * Copyright (c) 2016, Microsoft Corporation.
+ *
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ *
+ * Since the driver does not declare any device ids, you must allocate
+ * id and bind the device to the driver yourself.  For example:
+ *
+ * # echo "f8615163-df3e-46c5-913f-f2d2f965ed0e" \
+ *    > /sys/bus/vmbus/drivers/uio_hv_generic
+ * # echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 \
+ *    > /sys/bus/vmbus/drivers/hv_netvsc/unbind
+ * # echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 \
+ *    > /sys/bus/vmbus/drivers/uio_hv_generic/bind
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uio_driver.h>
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/hyperv.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+
+#include "../hv/hyperv_vmbus.h"
+
+#define DRIVER_VERSION	"0.02.0"
+#define DRIVER_AUTHOR	"Stephen Hemminger <sthemmin at microsoft.com>"
+#define DRIVER_DESC	"Generic UIO driver for VMBus devices"
+
+/*
+ * List of resources to be mapped to user space
+ * can be extended up to MAX_UIO_MAPS(5) items
+ */
+enum hv_uio_map {
+	TXRX_RING_MAP = 0,
+	INT_PAGE_MAP,
+	MON_PAGE_MAP,
+};
+
+#define HV_RING_SIZE	512
+
+struct hv_uio_private_data {
+	struct uio_info info;
+	struct hv_device *device;
+};
+
+static int
+hv_uio_mmap(struct uio_info *info, struct vm_area_struct *vma)
+{
+	int mi;
+
+	if (vma->vm_pgoff >= MAX_UIO_MAPS)
+		return -EINVAL;
+
+	if (info->mem[vma->vm_pgoff].size == 0)
+		return -EINVAL;
+
+	mi = (int)vma->vm_pgoff;
+
+	return remap_pfn_range(vma, vma->vm_start,
+			info->mem[mi].addr >> PAGE_SHIFT,
+			vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+/*
+ * This is the irqcontrol callback to be registered to uio_info.
+ * It can be used to disable/enable interrupt from user space processes.
+ *
+ * @param info
+ *  pointer to uio_info.
+ * @param irq_state
+ *  state value. 1 to enable interrupt, 0 to disable interrupt.
+ */
+static int
+hv_uio_irqcontrol(struct uio_info *info, s32 irq_state)
+{
+	struct hv_uio_private_data *pdata = info->priv;
+	struct hv_device *dev = pdata->device;
+
+	dev->channel->inbound.ring_buffer->interrupt_mask = !irq_state;
+	virt_mb();
+
+	return 0;
+}
+
+/*
+ * Callback from vmbus_event when something is in inbound ring.
+ */
+static void hv_uio_channel_cb(void *context)
+{
+	struct hv_uio_private_data *pdata = context;
+	struct hv_device *dev = pdata->device;
+
+	dev->channel->inbound.ring_buffer->interrupt_mask = 1;
+	virt_mb();
+
+	uio_event_notify(&pdata->info);
+}
+
+static int
+hv_uio_probe(struct hv_device *dev,
+	     const struct hv_vmbus_device_id *dev_id)
+{
+	struct hv_uio_private_data *pdata;
+	int ret;
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	ret = vmbus_open(dev->channel, HV_RING_SIZE * PAGE_SIZE,
+			 HV_RING_SIZE * PAGE_SIZE, NULL, 0,
+			 hv_uio_channel_cb, pdata);
+	if (ret)
+		goto fail;
+
+	dev->channel->inbound.ring_buffer->interrupt_mask = 1;
+	dev->channel->batched_reading = false;
+
+	/* Fill general uio info */
+	pdata->info.name = "uio_hv_generic";
+	pdata->info.version = DRIVER_VERSION;
+	pdata->info.irqcontrol = hv_uio_irqcontrol;
+	pdata->info.mmap = hv_uio_mmap;
+	pdata->info.irq = UIO_IRQ_CUSTOM;
+
+	/* mem resources */
+	pdata->info.mem[TXRX_RING_MAP].name = "txrx_rings";
+	pdata->info.mem[TXRX_RING_MAP].addr
+		= virt_to_phys(dev->channel->ringbuffer_pages);
+	pdata->info.mem[TXRX_RING_MAP].size
+		= dev->channel->ringbuffer_pagecount * PAGE_SIZE;
+	pdata->info.mem[TXRX_RING_MAP].memtype = UIO_MEM_LOGICAL;
+
+	pdata->info.mem[INT_PAGE_MAP].name = "int_page";
+	pdata->info.mem[INT_PAGE_MAP].addr =
+		virt_to_phys(vmbus_connection.int_page);
+	pdata->info.mem[INT_PAGE_MAP].size = PAGE_SIZE;
+	pdata->info.mem[INT_PAGE_MAP].memtype = UIO_MEM_LOGICAL;
+
+	pdata->info.mem[MON_PAGE_MAP].name = "monitor_pages";
+	pdata->info.mem[MON_PAGE_MAP].addr =
+		virt_to_phys(vmbus_connection.monitor_pages[1]);
+	pdata->info.mem[MON_PAGE_MAP].size = PAGE_SIZE;
+	pdata->info.mem[MON_PAGE_MAP].memtype = UIO_MEM_LOGICAL;
+
+	pdata->info.priv = pdata;
+	pdata->device = dev;
+
+	ret = uio_register_device(&dev->device, &pdata->info);
+	if (ret) {
+		dev_err(&dev->device, "hv_uio register failed\n");
+		goto fail_close;
+	}
+
+	hv_set_drvdata(dev, pdata);
+
+	return 0;
+
+fail_close:
+	vmbus_close(dev->channel);
+fail:
+	kfree(pdata);
+
+	return ret;
+}
+
+static int
+hv_uio_remove(struct hv_device *dev)
+{
+	struct hv_uio_private_data *pdata = hv_get_drvdata(dev);
+
+	if (!pdata)
+		return 0;
+
+	uio_unregister_device(&pdata->info);
+	hv_set_drvdata(dev, NULL);
+	vmbus_close(dev->channel);
+	kfree(pdata);
+	return 0;
+}
+
+static struct hv_driver hv_uio_drv = {
+	.name = "uio_hv_generic",
+	.id_table = NULL, /* only dynamic id's */
+	.probe = hv_uio_probe,
+	.remove = hv_uio_remove,
+};
+
+static int __init
+hyperv_module_init(void)
+{
+	return vmbus_driver_register(&hv_uio_drv);
+}
+
+static void __exit
+hyperv_module_exit(void)
+{
+	vmbus_driver_unregister(&hv_uio_drv);
+}
+
+module_init(hyperv_module_init);
+module_exit(hyperv_module_exit);
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);

drivers/uio/uio_pruss.c

@@ -111,6 +111,7 @@ static void pruss_cleanup(struct device *dev, struct uio_pruss_dev *gdev)
 			      gdev->sram_vaddr,
 			      sram_pool_sz);
 	kfree(gdev->info);
+	clk_disable(gdev->pruss_clk);
 	clk_put(gdev->pruss_clk);
 	kfree(gdev);
 }
@@ -143,7 +144,14 @@ static int pruss_probe(struct platform_device *pdev)
 		kfree(gdev);
 		return ret;
 	} else {
-		clk_enable(gdev->pruss_clk);
+		ret = clk_enable(gdev->pruss_clk);
+		if (ret) {
+			dev_err(dev, "Failed to enable clock\n");
+			clk_put(gdev->pruss_clk);
+			kfree(gdev->info);
+			kfree(gdev);
+			return ret;
+		}
 	}
 
 	regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0);

drivers/watchdog/mei_wdt.c

@@ -410,11 +410,11 @@ static void mei_wdt_unregister_work(struct work_struct *work)
 }
 
 /**
- * mei_wdt_event_rx - callback for data receive
+ * mei_wdt_rx - callback for data receive
  *
  * @cldev: bus device
  */
-static void mei_wdt_event_rx(struct mei_cl_device *cldev)
+static void mei_wdt_rx(struct mei_cl_device *cldev)
 {
 	struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev);
 	struct mei_wdt_start_response res;
@@ -482,11 +482,11 @@ out:
 }
 
 /*
- * mei_wdt_notify_event - callback for event notification
+ * mei_wdt_notif - callback for event notification
  *
  * @cldev: bus device
  */
-static void mei_wdt_notify_event(struct mei_cl_device *cldev)
+static void mei_wdt_notif(struct mei_cl_device *cldev)
 {
 	struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev);
 
@@ -496,23 +496,6 @@ static void mei_wdt_notify_event(struct mei_cl_device *cldev)
 	mei_wdt_register(wdt);
 }
 
-/**
- * mei_wdt_event - callback for event receive
- *
- * @cldev: bus device
- * @events: event mask
- * @context: callback context
- */
-static void mei_wdt_event(struct mei_cl_device *cldev,
-			  u32 events, void *context)
-{
-	if (events & BIT(MEI_CL_EVENT_RX))
-		mei_wdt_event_rx(cldev);
-
-	if (events & BIT(MEI_CL_EVENT_NOTIF))
-		mei_wdt_notify_event(cldev);
-}
-
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 
 static ssize_t mei_dbgfs_read_activation(struct file *file, char __user *ubuf,
@@ -623,16 +606,17 @@ static int mei_wdt_probe(struct mei_cl_device *cldev,
 		goto err_out;
 	}
 
-	ret = mei_cldev_register_event_cb(wdt->cldev,
-					  BIT(MEI_CL_EVENT_RX) |
-					  BIT(MEI_CL_EVENT_NOTIF),
-					  mei_wdt_event, NULL);
+	ret = mei_cldev_register_rx_cb(wdt->cldev, mei_wdt_rx);
+	if (ret) {
+		dev_err(&cldev->dev, "Could not reg rx event ret=%d\n", ret);
+		goto err_disable;
+	}
 
+	ret = mei_cldev_register_notif_cb(wdt->cldev, mei_wdt_notif);
 	/* on legacy devices notification is not supported
-	 * this doesn't fail the registration for RX event
 	 */
 	if (ret && ret != -EOPNOTSUPP) {
-		dev_err(&cldev->dev, "Could not register event ret=%d\n", ret);
+		dev_err(&cldev->dev, "Could not reg notif event ret=%d\n", ret);
 		goto err_disable;
 	}
 
@@ -699,25 +683,7 @@ static struct mei_cl_driver mei_wdt_driver = {
 	.remove = mei_wdt_remove,
 };
 
-static int __init mei_wdt_init(void)
-{
-	int ret;
-
-	ret = mei_cldev_driver_register(&mei_wdt_driver);
-	if (ret) {
-		pr_err(KBUILD_MODNAME ": module registration failed\n");
-		return ret;
-	}
-	return 0;
-}
-
-static void __exit mei_wdt_exit(void)
-{
-	mei_cldev_driver_unregister(&mei_wdt_driver);
-}
-
-module_init(mei_wdt_init);
-module_exit(mei_wdt_exit);
+module_mei_cl_driver(mei_wdt_driver);
 
 MODULE_AUTHOR("Intel Corporation");
 MODULE_LICENSE("GPL");

include/linux/fpga/fpga-bridge.h

@@ -0,0 +1,60 @@
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+
+#ifndef _LINUX_FPGA_BRIDGE_H
+#define _LINUX_FPGA_BRIDGE_H
+
+struct fpga_bridge;
+
+/**
+ * struct fpga_bridge_ops - ops for low level FPGA bridge drivers
+ * @enable_show: returns the FPGA bridge's status
+ * @enable_set: set a FPGA bridge as enabled or disabled
+ * @fpga_bridge_remove: set FPGA into a specific state during driver remove
+ */
+struct fpga_bridge_ops {
+	int (*enable_show)(struct fpga_bridge *bridge);
+	int (*enable_set)(struct fpga_bridge *bridge, bool enable);
+	void (*fpga_bridge_remove)(struct fpga_bridge *bridge);
+};
+
+/**
+ * struct fpga_bridge - FPGA bridge structure
+ * @name: name of low level FPGA bridge
+ * @dev: FPGA bridge device
+ * @mutex: enforces exclusive reference to bridge
+ * @br_ops: pointer to struct of FPGA bridge ops
+ * @info: fpga image specific information
+ * @node: FPGA bridge list node
+ * @priv: low level driver private date
+ */
+struct fpga_bridge {
+	const char *name;
+	struct device dev;
+	struct mutex mutex; /* for exclusive reference to bridge */
+	const struct fpga_bridge_ops *br_ops;
+	struct fpga_image_info *info;
+	struct list_head node;
+	void *priv;
+};
+
+#define to_fpga_bridge(d) container_of(d, struct fpga_bridge, dev)
+
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *node,
+				       struct fpga_image_info *info);
+void fpga_bridge_put(struct fpga_bridge *bridge);
+int fpga_bridge_enable(struct fpga_bridge *bridge);
+int fpga_bridge_disable(struct fpga_bridge *bridge);
+
+int fpga_bridges_enable(struct list_head *bridge_list);
+int fpga_bridges_disable(struct list_head *bridge_list);
+void fpga_bridges_put(struct list_head *bridge_list);
+int fpga_bridge_get_to_list(struct device_node *np,
+			    struct fpga_image_info *info,
+			    struct list_head *bridge_list);
+
+int fpga_bridge_register(struct device *dev, const char *name,
+			 const struct fpga_bridge_ops *br_ops, void *priv);
+void fpga_bridge_unregister(struct device *dev);
+
+#endif /* _LINUX_FPGA_BRIDGE_H */

include/linux/fpga/fpga-mgr.h

@@ -65,11 +65,26 @@ enum fpga_mgr_states {
 /*
  * FPGA Manager flags
  * FPGA_MGR_PARTIAL_RECONFIG: do partial reconfiguration if supported
+ * FPGA_MGR_EXTERNAL_CONFIG: FPGA has been configured prior to Linux booting
  */
 #define FPGA_MGR_PARTIAL_RECONFIG	BIT(0)
+#define FPGA_MGR_EXTERNAL_CONFIG	BIT(1)
+
+/**
+ * struct fpga_image_info - information specific to a FPGA image
+ * @flags: boolean flags as defined above
+ * @enable_timeout_us: maximum time to enable traffic through bridge (uSec)
+ * @disable_timeout_us: maximum time to disable traffic through bridge (uSec)
+ */
+struct fpga_image_info {
+	u32 flags;
+	u32 enable_timeout_us;
+	u32 disable_timeout_us;
+};
 
 /**
  * struct fpga_manager_ops - ops for low level fpga manager drivers
+ * @initial_header_size: Maximum number of bytes that should be passed into write_init
  * @state: returns an enum value of the FPGA's state
  * @write_init: prepare the FPGA to receive confuration data
  * @write: write count bytes of configuration data to the FPGA
@@ -81,11 +96,14 @@ enum fpga_mgr_states {
  * called, so leaving them out is fine.
  */
 struct fpga_manager_ops {
+	size_t initial_header_size;
 	enum fpga_mgr_states (*state)(struct fpga_manager *mgr);
-	int (*write_init)(struct fpga_manager *mgr, u32 flags,
+	int (*write_init)(struct fpga_manager *mgr,
+			  struct fpga_image_info *info,
 			  const char *buf, size_t count);
 	int (*write)(struct fpga_manager *mgr, const char *buf, size_t count);
-	int (*write_complete)(struct fpga_manager *mgr, u32 flags);
+	int (*write_complete)(struct fpga_manager *mgr,
+			      struct fpga_image_info *info);
 	void (*fpga_remove)(struct fpga_manager *mgr);
 };
 
@@ -109,14 +127,17 @@ struct fpga_manager {
 
 #define to_fpga_manager(d) container_of(d, struct fpga_manager, dev)
 
-int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
 		      const char *buf, size_t count);
 
-int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+			   struct fpga_image_info *info,
 			   const char *image_name);
 
 struct fpga_manager *of_fpga_mgr_get(struct device_node *node);
 
+struct fpga_manager *fpga_mgr_get(struct device *dev);
+
 void fpga_mgr_put(struct fpga_manager *mgr);
 
 int fpga_mgr_register(struct device *dev, const char *name,

include/linux/hyperv.h

@@ -696,7 +696,7 @@ enum vmbus_device_type {
 	HV_FCOPY,
 	HV_BACKUP,
 	HV_DM,
-	HV_UNKOWN,
+	HV_UNKNOWN,
 };
 
 struct vmbus_device {
@@ -1119,6 +1119,12 @@ struct hv_driver {
 
 	struct device_driver driver;
 
+	/* dynamic device GUID's */
+	struct  {
+		spinlock_t lock;
+		struct list_head list;
+	} dynids;
+
 	int (*probe)(struct hv_device *, const struct hv_vmbus_device_id *);
 	int (*remove)(struct hv_device *);
 	void (*shutdown)(struct hv_device *);
@@ -1447,6 +1453,7 @@ void hv_event_tasklet_enable(struct vmbus_channel *channel);
 
 void hv_process_channel_removal(struct vmbus_channel *channel, u32 relid);
 
+void vmbus_setevent(struct vmbus_channel *channel);
 /*
  * Negotiated version with the Host.
  */
@@ -1479,10 +1486,11 @@ hv_get_ring_buffer(struct hv_ring_buffer_info *ring_info)
  *    there is room for the producer to send the pending packet.
  */
 
-static inline  bool hv_need_to_signal_on_read(struct hv_ring_buffer_info *rbi)
+static inline  void hv_signal_on_read(struct vmbus_channel *channel)
 {
 	u32 cur_write_sz;
 	u32 pending_sz;
+	struct hv_ring_buffer_info *rbi = &channel->inbound;
 
 	/*
 	 * Issue a full memory barrier before making the signaling decision.
@@ -1500,14 +1508,14 @@ static inline  bool hv_need_to_signal_on_read(struct hv_ring_buffer_info *rbi)
 	pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz);
 	/* If the other end is not blocked on write don't bother. */
 	if (pending_sz == 0)
-		return false;
+		return;
 
 	cur_write_sz = hv_get_bytes_to_write(rbi);
 
 	if (cur_write_sz >= pending_sz)
-		return true;
+		vmbus_setevent(channel);
 
-	return false;
+	return;
 }
 
 /*
@@ -1519,31 +1527,23 @@ static inline struct vmpacket_descriptor *
 get_next_pkt_raw(struct vmbus_channel *channel)
 {
 	struct hv_ring_buffer_info *ring_info = &channel->inbound;
-	u32 read_loc = ring_info->priv_read_index;
+	u32 priv_read_loc = ring_info->priv_read_index;
 	void *ring_buffer = hv_get_ring_buffer(ring_info);
-	struct vmpacket_descriptor *cur_desc;
-	u32 packetlen;
 	u32 dsize = ring_info->ring_datasize;
-	u32 delta = read_loc - ring_info->ring_buffer->read_index;
+	/*
+	 * delta is the difference between what is available to read and
+	 * what was already consumed in place. We commit read index after
+	 * the whole batch is processed.
+	 */
+	u32 delta = priv_read_loc >= ring_info->ring_buffer->read_index ?
+		priv_read_loc - ring_info->ring_buffer->read_index :
+		(dsize - ring_info->ring_buffer->read_index) + priv_read_loc;
 	u32 bytes_avail_toread = (hv_get_bytes_to_read(ring_info) - delta);
 
 	if (bytes_avail_toread < sizeof(struct vmpacket_descriptor))
 		return NULL;
 
-	if ((read_loc + sizeof(*cur_desc)) > dsize)
-		return NULL;
-
-	cur_desc = ring_buffer + read_loc;
-	packetlen = cur_desc->len8 << 3;
-
-	/*
-	 * If the packet under consideration is wrapping around,
-	 * return failure.
-	 */
-	if ((read_loc + packetlen + VMBUS_PKT_TRAILER) > (dsize - 1))
-		return NULL;
-
-	return cur_desc;
+	return ring_buffer + priv_read_loc;
 }
 
 /*
@@ -1555,16 +1555,14 @@ static inline void put_pkt_raw(struct vmbus_channel *channel,
 				struct vmpacket_descriptor *desc)
 {
 	struct hv_ring_buffer_info *ring_info = &channel->inbound;
-	u32 read_loc = ring_info->priv_read_index;
 	u32 packetlen = desc->len8 << 3;
 	u32 dsize = ring_info->ring_datasize;
 
-	if ((read_loc + packetlen + VMBUS_PKT_TRAILER) > dsize)
-		BUG();
 	/*
 	 * Include the packet trailer.
 	 */
 	ring_info->priv_read_index += packetlen + VMBUS_PKT_TRAILER;
+	ring_info->priv_read_index %= dsize;
 }
 
 /*
@@ -1589,8 +1587,7 @@ static inline void commit_rd_index(struct vmbus_channel *channel)
 	virt_rmb();
 	ring_info->ring_buffer->read_index = ring_info->priv_read_index;
 
-	if (hv_need_to_signal_on_read(ring_info))
-		vmbus_set_event(channel);
+	hv_signal_on_read(channel);
 }
 
 

include/linux/mei_cl_bus.h

@@ -8,8 +8,7 @@
 struct mei_cl_device;
 struct mei_device;
 
-typedef void (*mei_cldev_event_cb_t)(struct mei_cl_device *cldev,
-				     u32 events, void *context);
+typedef void (*mei_cldev_cb_t)(struct mei_cl_device *cldev);
 
 /**
  * struct mei_cl_device - MEI device handle
@@ -24,12 +23,12 @@ typedef void (*mei_cldev_event_cb_t)(struct mei_cl_device *cldev,
  * @me_cl: me client
  * @cl: mei client
  * @name: device name
- * @event_work: async work to execute event callback
- * @event_cb: Drivers register this callback to get asynchronous ME
- *	events (e.g. Rx buffer pending) notifications.
- * @event_context: event callback run context
- * @events_mask: Events bit mask requested by driver.
- * @events: Events bitmask sent to the driver.
+ * @rx_work: async work to execute Rx event callback
+ * @rx_cb: Drivers register this callback to get asynchronous ME
+ *	Rx buffer pending notifications.
+ * @notif_work: async work to execute FW notif event callback
+ * @notif_cb: Drivers register this callback to get asynchronous ME
+ *	FW notification pending notifications.
  *
  * @do_match: wheather device can be matched with a driver
  * @is_added: device is already scanned
@@ -44,11 +43,10 @@ struct mei_cl_device {
 	struct mei_cl *cl;
 	char name[MEI_CL_NAME_SIZE];
 
-	struct work_struct event_work;
-	mei_cldev_event_cb_t event_cb;
-	void *event_context;
-	unsigned long events_mask;
-	unsigned long events;
+	struct work_struct rx_work;
+	mei_cldev_cb_t rx_cb;
+	struct work_struct notif_work;
+	mei_cldev_cb_t notif_cb;
 
 	unsigned int do_match:1;
 	unsigned int is_added:1;
@@ -74,16 +72,27 @@ int __mei_cldev_driver_register(struct mei_cl_driver *cldrv,
 
 void mei_cldev_driver_unregister(struct mei_cl_driver *cldrv);
 
-ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length);
-ssize_t  mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length);
+/**
+ * module_mei_cl_driver - Helper macro for registering mei cl driver
+ *
+ * @__mei_cldrv: mei_cl_driver structure
+ *
+ *  Helper macro for mei cl drivers which do not do anything special in module
+ *  init/exit, for eliminating a boilerplate code.
+ */
+#define module_mei_cl_driver(__mei_cldrv) \
+	module_driver(__mei_cldrv, \
+		      mei_cldev_driver_register,\
+		      mei_cldev_driver_unregister)
 
-int mei_cldev_register_event_cb(struct mei_cl_device *cldev,
-				unsigned long event_mask,
-				mei_cldev_event_cb_t read_cb, void *context);
+ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length);
+ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length);
+ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf,
+				size_t length);
 
-#define MEI_CL_EVENT_RX 0
-#define MEI_CL_EVENT_TX 1
-#define MEI_CL_EVENT_NOTIF 2
+int mei_cldev_register_rx_cb(struct mei_cl_device *cldev, mei_cldev_cb_t rx_cb);
+int mei_cldev_register_notif_cb(struct mei_cl_device *cldev,
+				mei_cldev_cb_t notif_cb);
 
 const uuid_le *mei_cldev_uuid(const struct mei_cl_device *cldev);
 u8 mei_cldev_ver(const struct mei_cl_device *cldev);

include/linux/miscdevice.h

@@ -71,6 +71,13 @@ struct miscdevice  {
 extern int misc_register(struct miscdevice *misc);
 extern void misc_deregister(struct miscdevice *misc);
 
+/*
+ * Helper macro for drivers that don't do anything special in the initcall.
+ * This helps in eleminating of boilerplate code.
+ */
+#define builtin_misc_device(__misc_device) \
+	builtin_driver(__misc_device, misc_register)
+
 /*
  * Helper macro for drivers that don't do anything special in module init / exit
  * call. This helps in eleminating of boilerplate code.

include/linux/of.h

@@ -1266,6 +1266,18 @@ static inline bool of_device_is_system_power_controller(const struct device_node
  * Overlay support
  */
 
+enum of_overlay_notify_action {
+	OF_OVERLAY_PRE_APPLY,
+	OF_OVERLAY_POST_APPLY,
+	OF_OVERLAY_PRE_REMOVE,
+	OF_OVERLAY_POST_REMOVE,
+};
+
+struct of_overlay_notify_data {
+	struct device_node *overlay;
+	struct device_node *target;
+};
+
 #ifdef CONFIG_OF_OVERLAY
 
 /* ID based overlays; the API for external users */
@@ -1273,6 +1285,9 @@ int of_overlay_create(struct device_node *tree);
 int of_overlay_destroy(int id);
 int of_overlay_destroy_all(void);
 
+int of_overlay_notifier_register(struct notifier_block *nb);
+int of_overlay_notifier_unregister(struct notifier_block *nb);
+
 #else
 
 static inline int of_overlay_create(struct device_node *tree)
@@ -1290,6 +1305,16 @@ static inline int of_overlay_destroy_all(void)
 	return -ENOTSUPP;
 }
 
+static inline int of_overlay_notifier_register(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int of_overlay_notifier_unregister(struct notifier_block *nb)
+{
+	return 0;
+}
+
 #endif
 
 #endif /* _LINUX_OF_H */

include/linux/vme.h

@@ -113,7 +113,6 @@ struct vme_driver {
 	int (*match)(struct vme_dev *);
 	int (*probe)(struct vme_dev *);
 	int (*remove)(struct vme_dev *);
-	void (*shutdown)(void);
 	struct device_driver driver;
 	struct list_head devices;
 };

mm/memory.c

@@ -4002,6 +4002,7 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(access_process_vm);
 
 /*
  * Print the name of a VMA.