MIPS: MT: Remove SMTC support

Nobody is maintaining SMTC anymore and there also seems to be no userbase.
Which is a pity - the SMTC technology primarily developed by Kevin D.
Kissell <kevink@paralogos.com> is an ingenious demonstration for the MT
ASE's power and elegance.

Based on Markos Chandras <Markos.Chandras@imgtec.com> patch
https://patchwork.linux-mips.org/patch/6719/ which while very similar did
no longer apply cleanly when I tried to merge it plus some additional
post-SMTC cleanup - SMTC was a feature as tricky to remove as it was to
merge once upon a time.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -1852,7 +1852,7 @@ config FORCE_MAX_ZONEORDER
 
 config CEVT_GIC
 	bool "Use GIC global counter for clock events"
-	depends on IRQ_GIC && !(MIPS_SEAD3 || MIPS_MT_SMTC)
+	depends on IRQ_GIC && !MIPS_SEAD3
 	help
 	  Use the GIC global counter for the clock events. The R4K clock
 	  event driver is always present, so if the platform ends up not
@@ -1936,24 +1936,6 @@ config MIPS_MT_SMP
 	  Intel Hyperthreading feature. For further information go to
 	  <http://www.imgtec.com/mips/mips-multithreading.asp>.
 
-config MIPS_MT_SMTC
-	bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
-	depends on CPU_MIPS32_R2
-	depends on SYS_SUPPORTS_MULTITHREADING
-	depends on !MIPS_CPS
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select MIPS_MT
-	select SMP
-	select SMP_UP
-	select SYS_SUPPORTS_SMP
-	select NR_CPUS_DEFAULT_8
-	help
-	  This is a kernel model which is known as SMTC. This is
-	  supported on cores with the MT ASE and presents all TCs
-	  available on all VPEs to support SMP. For further
-	  information see <http://www.linux-mips.org/wiki/34K#SMTC>.
-
 endchoice
 
 config MIPS_MT
@@ -1977,7 +1959,7 @@ config SYS_SUPPORTS_MULTITHREADING
 config MIPS_MT_FPAFF
 	bool "Dynamic FPU affinity for FP-intensive threads"
 	default y
-	depends on MIPS_MT_SMP || MIPS_MT_SMTC
+	depends on MIPS_MT_SMP
 
 config MIPS_VPE_LOADER
 	bool "VPE loader support."
@@ -1999,29 +1981,6 @@ config MIPS_VPE_LOADER_MT
 	default "y"
 	depends on MIPS_VPE_LOADER && !MIPS_CMP
 
-config MIPS_MT_SMTC_IM_BACKSTOP
-	bool "Use per-TC register bits as backstop for inhibited IM bits"
-	depends on MIPS_MT_SMTC
-	default n
-	help
-	  To support multiple TC microthreads acting as "CPUs" within
-	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
-	  during interrupt handling. To support legacy drivers and interrupt
-	  controller management code, SMTC has a "backstop" to track and
-	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead.
-
-config MIPS_MT_SMTC_IRQAFF
-	bool "Support IRQ affinity API"
-	depends on MIPS_MT_SMTC
-	default n
-	help
-	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
-	  for SMTC Linux kernel. Requires platform support, of which
-	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  Adds some overhead to interrupt dispatch, and
-	  should be used only if you know what you are doing.
-
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
 	depends on MIPS_VPE_LOADER
@@ -2049,7 +2008,7 @@ config MIPS_VPE_APSP_API_MT
 
 config MIPS_CMP
 	bool "MIPS CMP framework support (DEPRECATED)"
-	depends on SYS_SUPPORTS_MIPS_CMP && !MIPS_MT_SMTC
+	depends on SYS_SUPPORTS_MIPS_CMP
 	select MIPS_GIC_IPI
 	select SYNC_R4K
 	select WEAK_ORDERING
@@ -2256,7 +2215,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
+	depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If

arch/mips/Kconfig.debug

@@ -79,15 +79,6 @@ config CMDLINE_OVERRIDE
 
 	  Normally, you will choose 'N' here.
 
-config SMTC_IDLE_HOOK_DEBUG
-	bool "Enable additional debug checks before going into CPU idle loop"
-	depends on DEBUG_KERNEL && MIPS_MT_SMTC
-	help
-	  This option enables Enable additional debug checks before going into
-	  CPU idle loop.  For details on these checks, see
-	  arch/mips/kernel/smtc.c.  This debugging option result in significant
-	  overhead so should be disabled in production kernels.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC

arch/mips/configs/maltasmtc_defconfig

@@ -1,196 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_PAGE_SIZE_16KB=y
-CONFIG_MIPS_MT_SMTC=y
-# CONFIG_MIPS_MT_FPAFF is not set
-CONFIG_NR_CPUS=9
-CONFIG_HZ_48=y
-CONFIG_LOCALVERSION="smtc"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_CLS_IND=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-CONFIG_PCNET32=y
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_TOSHIBA is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_WLAN is not set
-# CONFIG_VT is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_G=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

arch/mips/include/asm/asmmacro.h

@@ -17,26 +17,8 @@
 #ifdef CONFIG_64BIT
 #include <asm/asmmacro-64.h>
 #endif
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif
-
-#ifdef CONFIG_MIPS_MT_SMTC
-	.macro	local_irq_enable reg=t0
-	mfc0	\reg, CP0_TCSTATUS
-	ori	\reg, \reg, TCSTATUS_IXMT
-	xori	\reg, \reg, TCSTATUS_IXMT
-	mtc0	\reg, CP0_TCSTATUS
-	_ehb
-	.endm
 
-	.macro	local_irq_disable reg=t0
-	mfc0	\reg, CP0_TCSTATUS
-	ori	\reg, \reg, TCSTATUS_IXMT
-	mtc0	\reg, CP0_TCSTATUS
-	_ehb
-	.endm
-#elif defined(CONFIG_CPU_MIPSR2)
+#ifdef CONFIG_CPU_MIPSR2
 	.macro	local_irq_enable reg=t0
 	ei
 	irq_enable_hazard
@@ -71,7 +53,7 @@
 	sw      \reg, TI_PRE_COUNT($28)
 #endif
 	.endm
-#endif /* CONFIG_MIPS_MT_SMTC */
+#endif /* CONFIG_CPU_MIPSR2 */
 
 	.macro	fpu_save_16even thread tmp=t0
 	cfc1	\tmp, fcr31

arch/mips/include/asm/cpu-info.h

@@ -65,17 +65,12 @@ struct cpuinfo_mips {
 #ifdef CONFIG_64BIT
 	int			vmbits; /* Virtual memory size in bits */
 #endif
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 	/*
-	 * In the MIPS MT "SMTC" model, each TC is considered
-	 * to be a "CPU" for the purposes of scheduling, but
-	 * exception resources, ASID spaces, etc, are common
-	 * to all TCs within the same VPE.
+	 * There is not necessarily a 1:1 mapping of VPE num to CPU number
+	 * in particular on multi-core systems.
 	 */
 	int			vpe_id;	 /* Virtual Processor number */
-#endif
-#ifdef CONFIG_MIPS_MT_SMTC
-	int			tc_id;	 /* Thread Context number */
 #endif
 	void			*data;	/* Additional data */
 	unsigned int		watch_reg_count;   /* Number that exist */
@@ -117,7 +112,7 @@ struct proc_cpuinfo_notifier_args {
 	unsigned long n;
 };
 
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 # define cpu_vpe_id(cpuinfo)	((cpuinfo)->vpe_id)
 #else
 # define cpu_vpe_id(cpuinfo)	0

arch/mips/include/asm/fixmap.h

@@ -48,11 +48,7 @@
 enum fixed_addresses {
 #define FIX_N_COLOURS 8
 	FIX_CMAP_BEGIN,
-#ifdef CONFIG_MIPS_MT_SMTC
-	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS * 2),
-#else
 	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * 2),
-#endif
 #ifdef CONFIG_HIGHMEM
 	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_BEGIN = FIX_CMAP_END + 1,

arch/mips/include/asm/irq.h

@@ -26,104 +26,8 @@ static inline int irq_canonicalize(int irq)
 #define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-
-struct irqaction;
-
-extern unsigned long irq_hwmask[];
-extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
-			  unsigned long hwmask);
-
-static inline void smtc_im_ack_irq(unsigned int irq)
-{
-	if (irq_hwmask[irq] & ST0_IM)
-		set_c0_status(irq_hwmask[irq] & ST0_IM);
-}
-
-#else
-
-static inline void smtc_im_ack_irq(unsigned int irq)
-{
-}
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-#include <linux/cpumask.h>
-
-extern int plat_set_irq_affinity(struct irq_data *d,
-				 const struct cpumask *affinity, bool force);
-extern void smtc_forward_irq(struct irq_data *d);
-
-/*
- * IRQ affinity hook invoked at the beginning of interrupt dispatch
- * if option is enabled.
- *
- * Up through Linux 2.6.22 (at least) cpumask operations are very
- * inefficient on MIPS.	 Initial prototypes of SMTC IRQ affinity
- * used a "fast path" per-IRQ-descriptor cache of affinity information
- * to reduce latency.  As there is a project afoot to optimize the
- * cpumask implementations, this version is optimistically assuming
- * that cpumask.h macro overhead is reasonable during interrupt dispatch.
- */
-static inline int handle_on_other_cpu(unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-
-	if (cpumask_test_cpu(smp_processor_id(), d->affinity))
-		return 0;
-	smtc_forward_irq(d);
-	return 1;
-}
-
-#else /* Not doing SMTC affinity */
-
-static inline int handle_on_other_cpu(unsigned int irq) { return 0; }
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
-#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
-
-static inline void smtc_im_backstop(unsigned int irq)
-{
-	if (irq_hwmask[irq] & 0x0000ff00)
-		write_c0_tccontext(read_c0_tccontext() &
-				   ~(irq_hwmask[irq] & 0x0000ff00));
-}
-
-/*
- * Clear interrupt mask handling "backstop" if irq_hwmask
- * entry so indicates. This implies that the ack() or end()
- * functions will take over re-enabling the low-level mask.
- * Otherwise it will be done on return from exception.
- */
-static inline int smtc_handle_on_other_cpu(unsigned int irq)
-{
-	int ret = handle_on_other_cpu(irq);
-
-	if (!ret)
-		smtc_im_backstop(irq);
-	return ret;
-}
-
-#else
-
-static inline void smtc_im_backstop(unsigned int irq) { }
-static inline int smtc_handle_on_other_cpu(unsigned int irq)
-{
-	return handle_on_other_cpu(irq);
-}
-
-#endif
-
 extern void do_IRQ(unsigned int irq);
 
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-
-extern void do_IRQ_no_affinity(unsigned int irq);
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
 extern void arch_init_irq(void);
 extern void spurious_interrupt(void);
 

arch/mips/include/asm/irqflags.h

@@ -17,7 +17,7 @@
 #include <linux/stringify.h>
 #include <asm/hazards.h>
 
-#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_CPU_MIPSR2
 
 static inline void arch_local_irq_disable(void)
 {
@@ -118,30 +118,15 @@ void arch_local_irq_disable(void);
 unsigned long arch_local_irq_save(void);
 void arch_local_irq_restore(unsigned long flags);
 void __arch_local_irq_restore(unsigned long flags);
-#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
-
-
-extern void smtc_ipi_replay(void);
+#endif /* CONFIG_CPU_MIPSR2 */
 
 static inline void arch_local_irq_enable(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of call overhead on each local_irq_enable()
-	 */
-	smtc_ipi_replay();
-#endif
 	__asm__ __volatile__(
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
-	"	ori	$1, 0x400					\n"
-	"	xori	$1, 0x400					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
+#if   defined(CONFIG_CPU_MIPSR2)
 	"	ei							\n"
 #else
 	"	mfc0	$1,$12						\n"
@@ -163,11 +148,7 @@ static inline unsigned long arch_local_save_flags(void)
 	asm __volatile__(
 	"	.set	push						\n"
 	"	.set	reorder						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	%[flags], $2, 1					\n"
-#else
 	"	mfc0	%[flags], $12					\n"
-#endif
 	"	.set	pop						\n"
 	: [flags] "=r" (flags));
 
@@ -177,14 +158,7 @@ static inline unsigned long arch_local_save_flags(void)
 
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
-	 */
-	return flags & 0x400;
-#else
 	return !(flags & 1);
-#endif
 }
 
 #endif /* #ifndef __ASSEMBLY__ */

arch/mips/include/asm/mach-malta/kernel-entry-init.h

@@ -80,36 +80,6 @@
 	.endm
 
 	.macro	kernel_entry_setup
-#ifdef CONFIG_MIPS_MT_SMTC
-	mfc0	t0, CP0_CONFIG
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 1
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 2
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 3
-	and	t0, 1<<2
-	bnez	t0, 0f
-9:
-	/* Assume we came from YAMON... */
-	PTR_LA	v0, 0x9fc00534	/* YAMON print */
-	lw	v0, (v0)
-	move	a0, zero
-	PTR_LA	a1, nonmt_processor
-	jal	v0
-
-	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
-	lw	v0, (v0)
-	li	a0, 1
-	jal	v0
-
-1:	b	1b
-
-	__INITDATA
-nonmt_processor:
-	.asciz	"SMTC kernel requires the MT ASE to run\n"
-	__FINIT
-#endif
 
 #ifdef CONFIG_EVA
 	sync

arch/mips/include/asm/mach-sead3/kernel-entry-init.h

@@ -10,37 +10,6 @@
 #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 
 	.macro	kernel_entry_setup
-#ifdef CONFIG_MIPS_MT_SMTC
-	mfc0	t0, CP0_CONFIG
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 1
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 2
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 3
-	and	t0, 1<<2
-	bnez	t0, 0f
-9 :
-	/* Assume we came from YAMON... */
-	PTR_LA	v0, 0x9fc00534	/* YAMON print */
-	lw	v0, (v0)
-	move	a0, zero
-	PTR_LA	a1, nonmt_processor
-	jal	v0
-
-	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
-	lw	v0, (v0)
-	li	a0, 1
-	jal	v0
-
-1 :	b	1b
-
-	__INITDATA
-nonmt_processor :
-	.asciz	"SMTC kernel requires the MT ASE to run\n"
-	__FINIT
-0 :
-#endif
 	.endm
 
 /*

arch/mips/include/asm/mips_mt.h

@@ -1,7 +1,6 @@
 /*
- * Definitions and decalrations for MIPS MT support
- * that are common between SMTC, VSMP, and/or AP/SP
- * kernel models.
+ * Definitions and decalrations for MIPS MT support that are common between
+ * the VSMP, and AP/SP kernel models.
  */
 #ifndef __ASM_MIPS_MT_H
 #define __ASM_MIPS_MT_H

arch/mips/include/asm/mipsregs.h

@@ -1014,19 +1014,8 @@ do {									\
 #define write_c0_compare3(val)	__write_32bit_c0_register($11, 7, val)
 
 #define read_c0_status()	__read_32bit_c0_register($12, 0)
-#ifdef CONFIG_MIPS_MT_SMTC
-#define write_c0_status(val)						\
-do {									\
-	__write_32bit_c0_register($12, 0, val);				\
-	__ehb();							\
-} while (0)
-#else
-/*
- * Legacy non-SMTC code, which may be hazardous
- * but which might not support EHB
- */
+
 #define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 #define read_c0_cause()		__read_32bit_c0_register($13, 0)
 #define write_c0_cause(val)	__write_32bit_c0_register($13, 0, val)
@@ -1750,11 +1739,6 @@ static inline void tlb_write_random(void)
 /*
  * Manipulate bits in a c0 register.
  */
-#ifndef CONFIG_MIPS_MT_SMTC
-/*
- * SMTC Linux requires shutting-down microthread scheduling
- * during CP0 register read-modify-write sequences.
- */
 #define __BUILD_SET_C0(name)					\
 static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
@@ -1793,121 +1777,6 @@ change_c0_##name(unsigned int change, unsigned int val)		\
 	return res;						\
 }
 
-#else /* SMTC versions that manage MT scheduling */
-
-#include <linux/irqflags.h>
-
-/*
- * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
- * header file recursion.
- */
-static inline unsigned int __dmt(void)
-{
-	int res;
-
-	__asm__ __volatile__(
-	"	.set	push						\n"
-	"	.set	mips32r2					\n"
-	"	.set	noat						\n"
-	"	.word	0x41610BC1			# dmt $1	\n"
-	"	ehb							\n"
-	"	move	%0, $1						\n"
-	"	.set	pop						\n"
-	: "=r" (res));
-
-	instruction_hazard();
-
-	return res;
-}
-
-#define __VPECONTROL_TE_SHIFT	15
-#define __VPECONTROL_TE		(1UL << __VPECONTROL_TE_SHIFT)
-
-#define __EMT_ENABLE		__VPECONTROL_TE
-
-static inline void __emt(unsigned int previous)
-{
-	if ((previous & __EMT_ENABLE))
-		__asm__ __volatile__(
-		"	.set	mips32r2				\n"
-		"	.word	0x41600be1		# emt		\n"
-		"	ehb						\n"
-		"	.set	mips0					\n");
-}
-
-static inline void __ehb(void)
-{
-	__asm__ __volatile__(
-	"	.set	mips32r2					\n"
-	"	ehb							\n"		"	.set	mips0						\n");
-}
-
-/*
- * Note that local_irq_save/restore affect TC-specific IXMT state,
- * not Status.IE as in non-SMTC kernel.
- */
-
-#define __BUILD_SET_C0(name)					\
-static inline unsigned int					\
-set_c0_##name(unsigned int set)					\
-{								\
-	unsigned int res;					\
-	unsigned int new;					\
-	unsigned int omt;					\
-	unsigned long flags;					\
-								\
-	local_irq_save(flags);					\
-	omt = __dmt();						\
-	res = read_c0_##name();					\
-	new = res | set;					\
-	write_c0_##name(new);					\
-	__emt(omt);						\
-	local_irq_restore(flags);				\
-								\
-	return res;						\
-}								\
-								\
-static inline unsigned int					\
-clear_c0_##name(unsigned int clear)				\
-{								\
-	unsigned int res;					\
-	unsigned int new;					\
-	unsigned int omt;					\
-	unsigned long flags;					\
-								\
-	local_irq_save(flags);					\
-	omt = __dmt();						\
-	res = read_c0_##name();					\
-	new = res & ~clear;					\
-	write_c0_##name(new);					\
-	__emt(omt);						\
-	local_irq_restore(flags);				\
-								\
-	return res;						\
-}								\
-								\
-static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int newbits)	\
-{								\
-	unsigned int res;					\
-	unsigned int new;					\
-	unsigned int omt;					\
-	unsigned long flags;					\
-								\
-	local_irq_save(flags);					\
-								\
-	omt = __dmt();						\
-	res = read_c0_##name();					\
-	new = res & ~change;					\
-	new |= (newbits & change);				\
-	write_c0_##name(new);					\
-	__emt(omt);						\
-	local_irq_restore(flags);				\
-								\
-	return res;						\
-}
-#endif
-
 __BUILD_SET_C0(status)
 __BUILD_SET_C0(cause)
 __BUILD_SET_C0(config)

arch/mips/include/asm/mmu_context.h

@@ -18,10 +18,6 @@
 #include <asm/cacheflush.h>
 #include <asm/hazards.h>
 #include <asm/tlbflush.h>
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#include <asm/smtc.h>
-#endif /* SMTC */
 #include <asm-generic/mm_hooks.h>
 
 #define TLBMISS_HANDLER_SETUP_PGD(pgd)					\
@@ -63,13 +59,6 @@ extern unsigned long pgd_current[];
 #define ASID_INC	0x10
 #define ASID_MASK	0xff0
 
-#elif defined(CONFIG_MIPS_MT_SMTC)
-
-#define ASID_INC	0x1
-extern unsigned long smtc_asid_mask;
-#define ASID_MASK	(smtc_asid_mask)
-#define HW_ASID_MASK	0xff
-/* End SMTC/34K debug hack */
 #else /* FIXME: not correct for R6000 */
 
 #define ASID_INC	0x1
@@ -92,7 +81,6 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 #define ASID_VERSION_MASK  ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
 #define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
 
-#ifndef CONFIG_MIPS_MT_SMTC
 /* Normal, classic MIPS get_new_mmu_context */
 static inline void
 get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
@@ -115,12 +103,6 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
 }
 
-#else /* CONFIG_MIPS_MT_SMTC */
-
-#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu))
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 /*
  * Initialize the context related info for a new mm_struct
  * instance.
@@ -141,46 +123,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned long flags;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long oldasid;
-	unsigned long mtflags;
-	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
-	local_irq_save(flags);
-	mtflags = dvpe();
-#else /* Not SMTC */
 	local_irq_save(flags);
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 	/* Check if our ASID is of an older version and thus invalid */
 	if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
 		get_new_mmu_context(next, cpu);
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * If the EntryHi ASID being replaced happens to be
-	 * the value flagged at ASID recycling time as having
-	 * an extended life, clear the bit showing it being
-	 * in use by this "CPU", and if that's the last bit,
-	 * free up the ASID value for use and flush any old
-	 * instances of it from the TLB.
-	 */
-	oldasid = (read_c0_entryhi() & ASID_MASK);
-	if(smtc_live_asid[mytlb][oldasid]) {
-		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
-		if(smtc_live_asid[mytlb][oldasid] == 0)
-			smtc_flush_tlb_asid(oldasid);
-	}
-	/*
-	 * Tread softly on EntryHi, and so long as we support
-	 * having ASID_MASK smaller than the hardware maximum,
-	 * make sure no "soft" bits become "hard"...
-	 */
-	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
-			 cpu_asid(cpu, next));
-	ehb(); /* Make sure it propagates to TCStatus */
-	evpe(mtflags);
-#else
 	write_c0_entryhi(cpu_asid(cpu, next));
-#endif /* CONFIG_MIPS_MT_SMTC */
 	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
 
 	/*
@@ -213,34 +161,12 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next)
 	unsigned long flags;
 	unsigned int cpu = smp_processor_id();
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long oldasid;
-	unsigned long mtflags;
-	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 	local_irq_save(flags);
 
 	/* Unconditionally get a new ASID.  */
 	get_new_mmu_context(next, cpu);
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/* See comments for similar code above */
-	mtflags = dvpe();
-	oldasid = read_c0_entryhi() & ASID_MASK;
-	if(smtc_live_asid[mytlb][oldasid]) {
-		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
-		if(smtc_live_asid[mytlb][oldasid] == 0)
-			 smtc_flush_tlb_asid(oldasid);
-	}
-	/* See comments for similar code above */
-	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
-			 cpu_asid(cpu, next));
-	ehb(); /* Make sure it propagates to TCStatus */
-	evpe(mtflags);
-#else
 	write_c0_entryhi(cpu_asid(cpu, next));
-#endif /* CONFIG_MIPS_MT_SMTC */
 	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
 
 	/* mark mmu ownership change */
@@ -258,48 +184,15 @@ static inline void
 drop_mmu_context(struct mm_struct *mm, unsigned cpu)
 {
 	unsigned long flags;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long oldasid;
-	/* Can't use spinlock because called from TLB flush within DVPE */
-	unsigned int prevvpe;
-	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 	local_irq_save(flags);
 
 	if (cpumask_test_cpu(cpu, mm_cpumask(mm)))  {
 		get_new_mmu_context(mm, cpu);
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* See comments for similar code above */
-		prevvpe = dvpe();
-		oldasid = (read_c0_entryhi() & ASID_MASK);
-		if (smtc_live_asid[mytlb][oldasid]) {
-			smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
-			if(smtc_live_asid[mytlb][oldasid] == 0)
-				smtc_flush_tlb_asid(oldasid);
-		}
-		/* See comments for similar code above */
-		write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
-				| cpu_asid(cpu, mm));
-		ehb(); /* Make sure it propagates to TCStatus */
-		evpe(prevvpe);
-#else /* not CONFIG_MIPS_MT_SMTC */
 		write_c0_entryhi(cpu_asid(cpu, mm));
-#endif /* CONFIG_MIPS_MT_SMTC */
 	} else {
 		/* will get a new context next time */
-#ifndef CONFIG_MIPS_MT_SMTC
 		cpu_context(cpu, mm) = 0;
-#else /* SMTC */
-		int i;
-
-		/* SMTC shares the TLB (and ASIDs) across VPEs */
-		for_each_online_cpu(i) {
-		    if((smtc_status & SMTC_TLB_SHARED)
-		    || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
-			cpu_context(i, mm) = 0;
-		}
-#endif /* CONFIG_MIPS_MT_SMTC */
 	}
 	local_irq_restore(flags);
 }

arch/mips/include/asm/module.h

@@ -144,13 +144,7 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_KERNEL_TYPE "64BIT "
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define MODULE_KERNEL_SMTC "MT_SMTC "
-#else
-#define MODULE_KERNEL_SMTC ""
-#endif
-
 #define MODULE_ARCH_VERMAGIC \
-	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
 
 #endif /* _ASM_MODULE_H */

arch/mips/include/asm/ptrace.h

@@ -39,9 +39,6 @@ struct pt_regs {
 	unsigned long cp0_badvaddr;
 	unsigned long cp0_cause;
 	unsigned long cp0_epc;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long cp0_tcstatus;
-#endif /* CONFIG_MIPS_MT_SMTC */
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	unsigned long long mpl[3];	  /* MTM{0,1,2} */
 	unsigned long long mtp[3];	  /* MTP{0,1,2} */

arch/mips/include/asm/r4kcache.h

@@ -43,11 +43,10 @@
 	: "i" (op), "R" (*(unsigned char *)(addr)))
 
 #ifdef CONFIG_MIPS_MT
+
 /*
- * Temporary hacks for SMTC debug. Optionally force single-threaded
- * execution during I-cache flushes.
+ * Optionally force single-threaded execution during I-cache flushes.
  */
-
 #define PROTECT_CACHE_FLUSHES 1
 
 #ifdef PROTECT_CACHE_FLUSHES

arch/mips/include/asm/smtc.h

@@ -1,78 +0,0 @@
-#ifndef _ASM_SMTC_MT_H
-#define _ASM_SMTC_MT_H
-
-/*
- * Definitions for SMTC multitasking on MIPS MT cores
- */
-
-#include <asm/mips_mt.h>
-#include <asm/smtc_ipi.h>
-
-/*
- * System-wide SMTC status information
- */
-
-extern unsigned int smtc_status;
-
-#define SMTC_TLB_SHARED 0x00000001
-#define SMTC_MTC_ACTIVE 0x00000002
-
-/*
- * TLB/ASID Management information
- */
-
-#define MAX_SMTC_TLBS 2
-#define MAX_SMTC_ASIDS 256
-#if NR_CPUS <= 8
-typedef char asiduse;
-#else
-#if NR_CPUS <= 16
-typedef short asiduse;
-#else
-typedef long asiduse;
-#endif
-#endif
-
-/*
- * VPE Management information
- */
-
-#define MAX_SMTC_VPES	MAX_SMTC_TLBS	/* FIXME: May not always be true. */
-
-extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
-
-struct mm_struct;
-struct task_struct;
-
-void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
-void self_ipi(struct smtc_ipi *);
-void smtc_flush_tlb_asid(unsigned long asid);
-extern int smtc_build_cpu_map(int startslot);
-extern void smtc_prepare_cpus(int cpus);
-extern void smtc_smp_finish(void);
-extern void smtc_boot_secondary(int cpu, struct task_struct *t);
-extern void smtc_cpus_done(void);
-extern void smtc_init_secondary(void);
-
-
-/*
- * Sharing the TLB between multiple VPEs means that the
- * "random" index selection function is not allowed to
- * select the current value of the Index register. To
- * avoid additional TLB pressure, the Index registers
- * are "parked" with an non-Valid value.
- */
-
-#define PARKED_INDEX	((unsigned int)0x80000000)
-
-/*
- * Define low-level interrupt mask for IPIs, if necessary.
- * By default, use SW interrupt 1, which requires no external
- * hardware support, but which works only for single-core
- * MIPS MT systems.
- */
-#ifndef MIPS_CPU_IPI_IRQ
-#define MIPS_CPU_IPI_IRQ 1
-#endif
-
-#endif /*  _ASM_SMTC_MT_H */

arch/mips/include/asm/smtc_ipi.h

@@ -1,129 +0,0 @@
-/*
- * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code.
- */
-#ifndef __ASM_SMTC_IPI_H
-#define __ASM_SMTC_IPI_H
-
-#include <linux/spinlock.h>
-
-//#define SMTC_IPI_DEBUG
-
-#ifdef SMTC_IPI_DEBUG
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#endif /* SMTC_IPI_DEBUG */
-
-/*
- * An IPI "message"
- */
-
-struct smtc_ipi {
-	struct smtc_ipi *flink;
-	int type;
-	void *arg;
-	int dest;
-#ifdef	SMTC_IPI_DEBUG
-	int sender;
-	long stamp;
-#endif /* SMTC_IPI_DEBUG */
-};
-
-/*
- * Defined IPI Types
- */
-
-#define LINUX_SMP_IPI 1
-#define SMTC_CLOCK_TICK 2
-#define IRQ_AFFINITY_IPI 3
-
-/*
- * A queue of IPI messages
- */
-
-struct smtc_ipi_q {
-	struct smtc_ipi *head;
-	spinlock_t lock;
-	struct smtc_ipi *tail;
-	int depth;
-	int resched_flag;	/* reschedule already queued */
-};
-
-static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&q->lock, flags);
-	if (q->head == NULL)
-		q->head = q->tail = p;
-	else
-		q->tail->flink = p;
-	p->flink = NULL;
-	q->tail = p;
-	q->depth++;
-#ifdef	SMTC_IPI_DEBUG
-	p->sender = read_c0_tcbind();
-	p->stamp = read_c0_count();
-#endif /* SMTC_IPI_DEBUG */
-	spin_unlock_irqrestore(&q->lock, flags);
-}
-
-static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q)
-{
-	struct smtc_ipi *p;
-
-	if (q->head == NULL)
-		p = NULL;
-	else {
-		p = q->head;
-		q->head = q->head->flink;
-		q->depth--;
-		/* Arguably unnecessary, but leaves queue cleaner */
-		if (q->head == NULL)
-			q->tail = NULL;
-	}
-
-	return p;
-}
-
-static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
-{
-	unsigned long flags;
-	struct smtc_ipi *p;
-
-	spin_lock_irqsave(&q->lock, flags);
-	p = __smtc_ipi_dq(q);
-	spin_unlock_irqrestore(&q->lock, flags);
-
-	return p;
-}
-
-static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&q->lock, flags);
-	if (q->head == NULL) {
-		q->head = q->tail = p;
-		p->flink = NULL;
-	} else {
-		p->flink = q->head;
-		q->head = p;
-	}
-	q->depth++;
-	spin_unlock_irqrestore(&q->lock, flags);
-}
-
-static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q)
-{
-	unsigned long flags;
-	int retval;
-
-	spin_lock_irqsave(&q->lock, flags);
-	retval = q->depth;
-	spin_unlock_irqrestore(&q->lock, flags);
-	return retval;
-}
-
-extern void smtc_send_ipi(int cpu, int type, unsigned int action);
-
-#endif /* __ASM_SMTC_IPI_H */

arch/mips/include/asm/smtc_proc.h

@@ -1,23 +0,0 @@
-/*
- * Definitions for SMTC /proc entries
- * Copyright(C) 2005 MIPS Technologies Inc.
- */
-#ifndef __ASM_SMTC_PROC_H
-#define __ASM_SMTC_PROC_H
-
-/*
- * per-"CPU" statistics
- */
-
-struct smtc_cpu_proc {
-	unsigned long timerints;
-	unsigned long selfipis;
-};
-
-extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
-
-/* Count of number of recoveries of "stolen" FPU access rights on 34K */
-
-extern atomic_t smtc_fpu_recoveries;
-
-#endif /* __ASM_SMTC_PROC_H */

arch/mips/include/asm/stackframe.h

@@ -19,22 +19,12 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
-/*
- * For SMTC kernel, global IE should be left set, and interrupts
- * controlled exclusively via IXMT.
- */
-#ifdef CONFIG_MIPS_MT_SMTC
-#define STATMASK 0x1e
-#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 #define STATMASK 0x3f
 #else
 #define STATMASK 0x1f
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 		.macro	SAVE_AT
 		.set	push
 		.set	noat
@@ -186,16 +176,6 @@
 		mfc0	v1, CP0_STATUS
 		LONG_S	$2, PT_R2(sp)
 		LONG_S	v1, PT_STATUS(sp)
-#ifdef CONFIG_MIPS_MT_SMTC
-		/*
-		 * Ideally, these instructions would be shuffled in
-		 * to cover the pipeline delay.
-		 */
-		.set	mips32
-		mfc0	k0, CP0_TCSTATUS
-		.set	mips0
-		LONG_S	k0, PT_TCSTATUS(sp)
-#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_S	$4, PT_R4(sp)
 		mfc0	v1, CP0_CAUSE
 		LONG_S	$5, PT_R5(sp)
@@ -321,36 +301,6 @@
 		.set	push
 		.set	reorder
 		.set	noat
-#ifdef CONFIG_MIPS_MT_SMTC
-		.set	mips32r2
-		/*
-		 * We need to make sure the read-modify-write
-		 * of Status below isn't perturbed by an interrupt
-		 * or cross-TC access, so we need to do at least a DMT,
-		 * protected by an interrupt-inhibit. But setting IXMT
-		 * also creates a few-cycle window where an IPI could
-		 * be queued and not be detected before potentially
-		 * returning to a WAIT or user-mode loop. It must be
-		 * replayed.
-		 *
-		 * We're in the middle of a context switch, and
-		 * we can't dispatch it directly without trashing
-		 * some registers, so we'll try to detect this unlikely
-		 * case and program a software interrupt in the VPE,
-		 * as would be done for a cross-VPE IPI.  To accommodate
-		 * the handling of that case, we're doing a DVPE instead
-		 * of just a DMT here to protect against other threads.
-		 * This is a lot of cruft to cover a tiny window.
-		 * If you can find a better design, implement it!
-		 *
-		 */
-		mfc0	v0, CP0_TCSTATUS
-		ori	v0, TCSTATUS_IXMT
-		mtc0	v0, CP0_TCSTATUS
-		_ehb
-		DVPE	5				# dvpe a1
-		jal	mips_ihb
-#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	a0, CP0_STATUS
 		ori	a0, STATMASK
 		xori	a0, STATMASK
@@ -362,59 +312,6 @@
 		and	v0, v1
 		or	v0, a0
 		mtc0	v0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-/*
- * Only after EXL/ERL have been restored to status can we
- * restore TCStatus.IXMT.
- */
-		LONG_L	v1, PT_TCSTATUS(sp)
-		_ehb
-		mfc0	a0, CP0_TCSTATUS
-		andi	v1, TCSTATUS_IXMT
-		bnez	v1, 0f
-
-/*
- * We'd like to detect any IPIs queued in the tiny window
- * above and request an software interrupt to service them
- * when we ERET.
- *
- * Computing the offset into the IPIQ array of the executing
- * TC's IPI queue in-line would be tedious.  We use part of
- * the TCContext register to hold 16 bits of offset that we
- * can add in-line to find the queue head.
- */
-		mfc0	v0, CP0_TCCONTEXT
-		la	a2, IPIQ
-		srl	v0, v0, 16
-		addu	a2, a2, v0
-		LONG_L	v0, 0(a2)
-		beqz	v0, 0f
-/*
- * If we have a queue, provoke dispatch within the VPE by setting C_SW1
- */
-		mfc0	v0, CP0_CAUSE
-		ori	v0, v0, C_SW1
-		mtc0	v0, CP0_CAUSE
-0:
-		/*
-		 * This test should really never branch but
-		 * let's be prudent here.  Having atomized
-		 * the shared register modifications, we can
-		 * now EVPE, and must do so before interrupts
-		 * are potentially re-enabled.
-		 */
-		andi	a1, a1, MVPCONTROL_EVP
-		beqz	a1, 1f
-		evpe
-1:
-		/* We know that TCStatua.IXMT should be set from above */
-		xori	a0, a0, TCSTATUS_IXMT
-		or	a0, a0, v1
-		mtc0	a0, CP0_TCSTATUS
-		_ehb
-
-		.set	mips0
-#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_L	v1, PT_EPC(sp)
 		MTC0	v1, CP0_EPC
 		LONG_L	$31, PT_R31(sp)
@@ -467,33 +364,11 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	CLI
-#if !defined(CONFIG_MIPS_MT_SMTC)
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | STATMASK
 		or	t0, t1
 		xori	t0, STATMASK
 		mtc0	t0, CP0_STATUS
-#else /* CONFIG_MIPS_MT_SMTC */
-		/*
-		 * For SMTC, we need to set privilege
-		 * and disable interrupts only for the
-		 * current TC, using the TCStatus register.
-		 */
-		mfc0	t0, CP0_TCSTATUS
-		/* Fortunately CU 0 is in the same place in both registers */
-		/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
-		li	t1, ST0_CU0 | 0x08001c00
-		or	t0, t1
-		/* Clear TKSU, leave IXMT */
-		xori	t0, 0x00001800
-		mtc0	t0, CP0_TCSTATUS
-		_ehb
-		/* We need to leave the global IE bit set, but clear EXL...*/
-		mfc0	t0, CP0_STATUS
-		ori	t0, ST0_EXL | ST0_ERL
-		xori	t0, ST0_EXL | ST0_ERL
-		mtc0	t0, CP0_STATUS
-#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_disable_hazard
 		.endm
 
@@ -502,35 +377,11 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	STI
-#if !defined(CONFIG_MIPS_MT_SMTC)
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | STATMASK
 		or	t0, t1
 		xori	t0, STATMASK & ~1
 		mtc0	t0, CP0_STATUS
-#else /* CONFIG_MIPS_MT_SMTC */
-		/*
-		 * For SMTC, we need to set privilege
-		 * and enable interrupts only for the
-		 * current TC, using the TCStatus register.
-		 */
-		_ehb
-		mfc0	t0, CP0_TCSTATUS
-		/* Fortunately CU 0 is in the same place in both registers */
-		/* Set TCU0, TKSU (for later inversion) and IXMT */
-		li	t1, ST0_CU0 | 0x08001c00
-		or	t0, t1
-		/* Clear TKSU *and* IXMT */
-		xori	t0, 0x00001c00
-		mtc0	t0, CP0_TCSTATUS
-		_ehb
-		/* We need to leave the global IE bit set, but clear EXL...*/
-		mfc0	t0, CP0_STATUS
-		ori	t0, ST0_EXL
-		xori	t0, ST0_EXL
-		mtc0	t0, CP0_STATUS
-		/* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
-#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_enable_hazard
 		.endm
 
@@ -540,32 +391,6 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	KMODE
-#ifdef CONFIG_MIPS_MT_SMTC
-		/*
-		 * This gets baroque in SMTC.  We want to
-		 * protect the non-atomic clearing of EXL
-		 * with DMT/EMT, but we don't want to take
-		 * an interrupt while DMT is still in effect.
-		 */
-
-		/* KMODE gets invoked from both reorder and noreorder code */
-		.set	push
-		.set	mips32r2
-		.set	noreorder
-		mfc0	v0, CP0_TCSTATUS
-		andi	v1, v0, TCSTATUS_IXMT
-		ori	v0, TCSTATUS_IXMT
-		mtc0	v0, CP0_TCSTATUS
-		_ehb
-		DMT	2				# dmt	v0
-		/*
-		 * We don't know a priori if ra is "live"
-		 */
-		move	t0, ra
-		jal	mips_ihb
-		nop	/* delay slot */
-		move	ra, t0
-#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | (STATMASK & ~1)
 #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
@@ -576,25 +401,6 @@
 		or	t0, t1
 		xori	t0, STATMASK & ~1
 		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-		_ehb
-		andi	v0, v0, VPECONTROL_TE
-		beqz	v0, 2f
-		nop	/* delay slot */
-		emt
-2:
-		mfc0	v0, CP0_TCSTATUS
-		/* Clear IXMT, then OR in previous value */
-		ori	v0, TCSTATUS_IXMT
-		xori	v0, TCSTATUS_IXMT
-		or	v0, v1, v0
-		mtc0	v0, CP0_TCSTATUS
-		/*
-		 * irq_disable_hazard below should expand to EHB
-		 * on 24K/34K CPUS
-		 */
-		.set pop
-#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_disable_hazard
 		.endm
 

arch/mips/include/asm/thread_info.h

@@ -159,11 +159,7 @@ static inline struct thread_info *current_thread_info(void)
  * We stash processor id into a COP0 register to retrieve it fast
  * at kernel exception entry.
  */
-#if defined(CONFIG_MIPS_MT_SMTC)
-#define SMP_CPUID_REG		2, 2	/* TCBIND */
-#define ASM_SMP_CPUID_REG	$2, 2
-#define SMP_CPUID_PTRSHIFT	19
-#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
+#if   defined(CONFIG_MIPS_PGD_C0_CONTEXT)
 #define SMP_CPUID_REG		20, 0	/* XCONTEXT */
 #define ASM_SMP_CPUID_REG	$20
 #define SMP_CPUID_PTRSHIFT	48
@@ -179,13 +175,8 @@ static inline struct thread_info *current_thread_info(void)
 #define SMP_CPUID_REGSHIFT	(SMP_CPUID_PTRSHIFT + 2)
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define ASM_CPUID_MFC0		mfc0
-#define UASM_i_CPUID_MFC0	uasm_i_mfc0
-#else
 #define ASM_CPUID_MFC0		MFC0
 #define UASM_i_CPUID_MFC0	UASM_i_MFC0
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_THREAD_INFO_H */

arch/mips/include/asm/time.h

@@ -52,14 +52,11 @@ extern int (*perf_irq)(void);
  */
 extern unsigned int __weak get_c0_compare_int(void);
 extern int r4k_clockevent_init(void);
-extern int smtc_clockevent_init(void);
 extern int gic_clockevent_init(void);
 
 static inline int mips_clockevent_init(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	return smtc_clockevent_init();
-#elif defined(CONFIG_CEVT_GIC)
+#if   defined(CONFIG_CEVT_GIC)
 	return (gic_clockevent_init() | r4k_clockevent_init());
 #elif defined(CONFIG_CEVT_R4K)
 	return r4k_clockevent_init();

arch/mips/kernel/Makefile

@@ -17,7 +17,6 @@ endif
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
-obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GIC)		+= cevt-gic.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
@@ -50,7 +49,6 @@ obj-$(CONFIG_CPU_BMIPS)		+= smp-bmips.o bmips_vec.o
 
 obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
 obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
-obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o

arch/mips/kernel/asm-offsets.c

@@ -64,9 +64,6 @@ void output_ptreg_defines(void)
 	OFFSET(PT_BVADDR, pt_regs, cp0_badvaddr);
 	OFFSET(PT_STATUS, pt_regs, cp0_status);
 	OFFSET(PT_CAUSE, pt_regs, cp0_cause);
-#ifdef CONFIG_MIPS_MT_SMTC
-	OFFSET(PT_TCSTATUS, pt_regs, cp0_tcstatus);
-#endif /* CONFIG_MIPS_MT_SMTC */
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	OFFSET(PT_MPL, pt_regs, mpl);
 	OFFSET(PT_MTP, pt_regs, mtp);

arch/mips/kernel/cevt-r4k.c

@@ -12,17 +12,10 @@
 #include <linux/smp.h>
 #include <linux/irq.h>
 
-#include <asm/smtc_ipi.h>
 #include <asm/time.h>
 #include <asm/cevt-r4k.h>
 #include <asm/gic.h>
 
-/*
- * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
- * of these routines with SMTC-specific variants.
- */
-
-#ifndef CONFIG_MIPS_MT_SMTC
 static int mips_next_event(unsigned long delta,
 			   struct clock_event_device *evt)
 {
@@ -36,8 +29,6 @@ static int mips_next_event(unsigned long delta,
 	return res;
 }
 
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 void mips_set_clock_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
@@ -47,7 +38,6 @@ void mips_set_clock_mode(enum clock_event_mode mode,
 DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 int cp0_timer_irq_installed;
 
-#ifndef CONFIG_MIPS_MT_SMTC
 irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
@@ -82,8 +72,6 @@ out:
 	return IRQ_HANDLED;
 }
 
-#endif /* Not CONFIG_MIPS_MT_SMTC */
-
 struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
 	.flags = IRQF_PERCPU | IRQF_TIMER,
@@ -170,7 +158,6 @@ int c0_compare_int_usable(void)
 	return 1;
 }
 
-#ifndef CONFIG_MIPS_MT_SMTC
 int r4k_clockevent_init(void)
 {
 	unsigned int cpu = smp_processor_id();
@@ -225,4 +212,3 @@ int r4k_clockevent_init(void)
 	return 0;
 }
 
-#endif /* Not CONFIG_MIPS_MT_SMTC */

arch/mips/kernel/cevt-smtc.c

@@ -1,324 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.
- * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
- */
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
-#include <linux/irq.h>
-
-#include <asm/smtc_ipi.h>
-#include <asm/time.h>
-#include <asm/cevt-r4k.h>
-
-/*
- * Variant clock event timer support for SMTC on MIPS 34K, 1004K
- * or other MIPS MT cores.
- *
- * Notes on SMTC Support:
- *
- * SMTC has multiple microthread TCs pretending to be Linux CPUs.
- * But there's only one Count/Compare pair per VPE, and Compare
- * interrupts are taken opportunisitically by available TCs
- * bound to the VPE with the Count register.  The new timer
- * framework provides for global broadcasts, but we really
- * want VPE-level multicasts for best behavior. So instead
- * of invoking the high-level clock-event broadcast code,
- * this version of SMTC support uses the historical SMTC
- * multicast mechanisms "under the hood", appearing to the
- * generic clock layer as if the interrupts are per-CPU.
- *
- * The approach taken here is to maintain a set of NR_CPUS
- * virtual timers, and track which "CPU" needs to be alerted
- * at each event.
- *
- * It's unlikely that we'll see a MIPS MT core with more than
- * 2 VPEs, but we *know* that we won't need to handle more
- * VPEs than we have "CPUs".  So NCPUs arrays of NCPUs elements
- * is always going to be overkill, but always going to be enough.
- */
-
-unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
-static int smtc_nextinvpe[NR_CPUS];
-
-/*
- * Timestamps stored are absolute values to be programmed
- * into Count register.	 Valid timestamps will never be zero.
- * If a Zero Count value is actually calculated, it is converted
- * to be a 1, which will introduce 1 or two CPU cycles of error
- * roughly once every four billion events, which at 1000 HZ means
- * about once every 50 days.  If that's actually a problem, one
- * could alternate squashing 0 to 1 and to -1.
- */
-
-#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
-#define ISVALID(x) ((x) != 0L)
-
-/*
- * Time comparison is subtle, as it's really truncated
- * modular arithmetic.
- */
-
-#define IS_SOONER(a, b, reference) \
-    (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
-
-/*
- * CATCHUP_INCREMENT, used when the function falls behind the counter.
- * Could be an increasing function instead of a constant;
- */
-
-#define CATCHUP_INCREMENT 64
-
-static int mips_next_event(unsigned long delta,
-				struct clock_event_device *evt)
-{
-	unsigned long flags;
-	unsigned int mtflags;
-	unsigned long timestamp, reference, previous;
-	unsigned long nextcomp = 0L;
-	int vpe = current_cpu_data.vpe_id;
-	int cpu = smp_processor_id();
-	local_irq_save(flags);
-	mtflags = dmt();
-
-	/*
-	 * Maintain the per-TC virtual timer
-	 * and program the per-VPE shared Count register
-	 * as appropriate here...
-	 */
-	reference = (unsigned long)read_c0_count();
-	timestamp = MAKEVALID(reference + delta);
-	/*
-	 * To really model the clock, we have to catch the case
-	 * where the current next-in-VPE timestamp is the old
-	 * timestamp for the calling CPE, but the new value is
-	 * in fact later.  In that case, we have to do a full
-	 * scan and discover the new next-in-VPE CPU id and
-	 * timestamp.
-	 */
-	previous = smtc_nexttime[vpe][cpu];
-	if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
-	    && IS_SOONER(previous, timestamp, reference)) {
-		int i;
-		int soonest = cpu;
-
-		/*
-		 * Update timestamp array here, so that new
-		 * value gets considered along with those of
-		 * other virtual CPUs on the VPE.
-		 */
-		smtc_nexttime[vpe][cpu] = timestamp;
-		for_each_online_cpu(i) {
-			if (ISVALID(smtc_nexttime[vpe][i])
-			    && IS_SOONER(smtc_nexttime[vpe][i],
-				smtc_nexttime[vpe][soonest], reference)) {
-				    soonest = i;
-			}
-		}
-		smtc_nextinvpe[vpe] = soonest;
-		nextcomp = smtc_nexttime[vpe][soonest];
-	/*
-	 * Otherwise, we don't have to process the whole array rank,
-	 * we just have to see if the event horizon has gotten closer.
-	 */
-	} else {
-		if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
-		    IS_SOONER(timestamp,
-			smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
-			    smtc_nextinvpe[vpe] = cpu;
-			    nextcomp = timestamp;
-		}
-		/*
-		 * Since next-in-VPE may me the same as the executing
-		 * virtual CPU, we update the array *after* checking
-		 * its value.
-		 */
-		smtc_nexttime[vpe][cpu] = timestamp;
-	}
-
-	/*
-	 * It may be that, in fact, we don't need to update Compare,
-	 * but if we do, we want to make sure we didn't fall into
-	 * a crack just behind Count.
-	 */
-	if (ISVALID(nextcomp)) {
-		write_c0_compare(nextcomp);
-		ehb();
-		/*
-		 * We never return an error, we just make sure
-		 * that we trigger the handlers as quickly as
-		 * we can if we fell behind.
-		 */
-		while ((nextcomp - (unsigned long)read_c0_count())
-			> (unsigned long)LONG_MAX) {
-			nextcomp += CATCHUP_INCREMENT;
-			write_c0_compare(nextcomp);
-			ehb();
-		}
-	}
-	emt(mtflags);
-	local_irq_restore(flags);
-	return 0;
-}
-
-
-void smtc_distribute_timer(int vpe)
-{
-	unsigned long flags;
-	unsigned int mtflags;
-	int cpu;
-	struct clock_event_device *cd;
-	unsigned long nextstamp;
-	unsigned long reference;
-
-
-repeat:
-	nextstamp = 0L;
-	for_each_online_cpu(cpu) {
-	    /*
-	     * Find virtual CPUs within the current VPE who have
-	     * unserviced timer requests whose time is now past.
-	     */
-	    local_irq_save(flags);
-	    mtflags = dmt();
-	    if (cpu_data[cpu].vpe_id == vpe &&
-		ISVALID(smtc_nexttime[vpe][cpu])) {
-		reference = (unsigned long)read_c0_count();
-		if ((smtc_nexttime[vpe][cpu] - reference)
-			 > (unsigned long)LONG_MAX) {
-			    smtc_nexttime[vpe][cpu] = 0L;
-			    emt(mtflags);
-			    local_irq_restore(flags);
-			    /*
-			     * We don't send IPIs to ourself.
-			     */
-			    if (cpu != smp_processor_id()) {
-				smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-			    } else {
-				cd = &per_cpu(mips_clockevent_device, cpu);
-				cd->event_handler(cd);
-			    }
-		} else {
-			/* Local to VPE but Valid Time not yet reached. */
-			if (!ISVALID(nextstamp) ||
-			    IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
-			    reference)) {
-				smtc_nextinvpe[vpe] = cpu;
-				nextstamp = smtc_nexttime[vpe][cpu];
-			}
-			emt(mtflags);
-			local_irq_restore(flags);
-		}
-	    } else {
-		emt(mtflags);
-		local_irq_restore(flags);
-
-	    }
-	}
-	/* Reprogram for interrupt at next soonest timestamp for VPE */
-	if (ISVALID(nextstamp)) {
-		write_c0_compare(nextstamp);
-		ehb();
-		if ((nextstamp - (unsigned long)read_c0_count())
-			> (unsigned long)LONG_MAX)
-				goto repeat;
-	}
-}
-
-
-irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
-
-	/* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
-	handle_perf_irq(1);
-
-	if (read_c0_cause() & (1 << 30)) {
-		/* Clear Count/Compare Interrupt */
-		write_c0_compare(read_c0_compare());
-		smtc_distribute_timer(cpu_data[cpu].vpe_id);
-	}
-	return IRQ_HANDLED;
-}
-
-
-int smtc_clockevent_init(void)
-{
-	uint64_t mips_freq = mips_hpt_frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
-	unsigned int irq;
-	int i;
-	int j;
-
-	if (!cpu_has_counter || !mips_hpt_frequency)
-		return -ENXIO;
-	if (cpu == 0) {
-		for (i = 0; i < num_possible_cpus(); i++) {
-			smtc_nextinvpe[i] = 0;
-			for (j = 0; j < num_possible_cpus(); j++)
-				smtc_nexttime[i][j] = 0L;
-		}
-		/*
-		 * SMTC also can't have the usablility test
-		 * run by secondary TCs once Compare is in use.
-		 */
-		if (!c0_compare_int_usable())
-			return -ENXIO;
-	}
-
-	/*
-	 * With vectored interrupts things are getting platform specific.
-	 * get_c0_compare_int is a hook to allow a platform to return the
-	 * interrupt number of it's liking.
-	 */
-	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-	if (get_c0_compare_int)
-		irq = get_c0_compare_int();
-
-	cd = &per_cpu(mips_clockevent_device, cpu);
-
-	cd->name		= "MIPS";
-	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
-
-	/* Calculate the min / max delta */
-	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 32;
-	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
-
-	cd->rating		= 300;
-	cd->irq			= irq;
-	cd->cpumask		= cpumask_of(cpu);
-	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_clock_mode;
-	cd->event_handler	= mips_event_handler;
-
-	clockevents_register_device(cd);
-
-	/*
-	 * On SMTC we only want to do the data structure
-	 * initialization and IRQ setup once.
-	 */
-	if (cpu)
-		return 0;
-	/*
-	 * And we need the hwmask associated with the c0_compare
-	 * vector to be initialized.
-	 */
-	irq_hwmask[irq] = (0x100 << cp0_compare_irq);
-	if (cp0_timer_irq_installed)
-		return 0;
-
-	cp0_timer_irq_installed = 1;
-
-	setup_irq(irq, &c0_compare_irqaction);
-
-	return 0;
-}

arch/mips/kernel/cpu-probe.c

@@ -62,7 +62,7 @@ static inline void check_errata(void)
 	case CPU_34K:
 		/*
 		 * Erratum "RPS May Cause Incorrect Instruction Execution"
-		 * This code only handles VPE0, any SMP/SMTC/RTOS code
+		 * This code only handles VPE0, any SMP/RTOS code
 		 * making use of VPE1 will be responsable for that VPE.
 		 */
 		if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)

arch/mips/kernel/entry.S

@@ -16,9 +16,6 @@
 #include <asm/isadep.h>
 #include <asm/thread_info.h>
 #include <asm/war.h>
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif
 
 #ifndef CONFIG_PREEMPT
 #define resume_kernel	restore_all
@@ -89,41 +86,6 @@ FEXPORT(syscall_exit)
 	bnez	t0, syscall_exit_work
 
 restore_all:				# restore full frame
-#ifdef CONFIG_MIPS_MT_SMTC
-#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
-/* Re-arm any temporarily masked interrupts not explicitly "acked" */
-	mfc0	v0, CP0_TCSTATUS
-	ori	v1, v0, TCSTATUS_IXMT
-	mtc0	v1, CP0_TCSTATUS
-	andi	v0, TCSTATUS_IXMT
-	_ehb
-	mfc0	t0, CP0_TCCONTEXT
-	DMT	9				# dmt t1
-	jal	mips_ihb
-	mfc0	t2, CP0_STATUS
-	andi	t3, t0, 0xff00
-	or	t2, t2, t3
-	mtc0	t2, CP0_STATUS
-	_ehb
-	andi	t1, t1, VPECONTROL_TE
-	beqz	t1, 1f
-	EMT
-1:
-	mfc0	v1, CP0_TCSTATUS
-	/* We set IXMT above, XOR should clear it here */
-	xori	v1, v1, TCSTATUS_IXMT
-	or	v1, v0, v1
-	mtc0	v1, CP0_TCSTATUS
-	_ehb
-	xor	t0, t0, t3
-	mtc0	t0, CP0_TCCONTEXT
-#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
-/* Detect and execute deferred IPI "interrupts" */
-	LONG_L	s0, TI_REGS($28)
-	LONG_S	sp, TI_REGS($28)
-	jal	deferred_smtc_ipi
-	LONG_S	s0, TI_REGS($28)
-#endif /* CONFIG_MIPS_MT_SMTC */
 	.set	noat
 	RESTORE_TEMP
 	RESTORE_AT

arch/mips/kernel/genex.S

@@ -21,20 +21,6 @@
 #include <asm/war.h>
 #include <asm/thread_info.h>
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define PANIC_PIC(msg)					\
-		.set	push;				\
-		.set	nomicromips;			\
-		.set	reorder;			\
-		PTR_LA	a0,8f;				\
-		.set	noat;				\
-		PTR_LA	AT, panic;			\
-		jr	AT;				\
-9:		b	9b;				\
-		.set	pop;				\
-		TEXT(msg)
-#endif
-
 	__INIT
 
 /*
@@ -251,15 +237,6 @@ NESTED(except_vec_vi, 0, sp)
 	SAVE_AT
 	.set	push
 	.set	noreorder
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * To keep from blindly blocking *all* interrupts
-	 * during service by SMTC kernel, we also want to
-	 * pass the IM value to be cleared.
-	 */
-FEXPORT(except_vec_vi_mori)
-	ori	a0, $0, 0
-#endif /* CONFIG_MIPS_MT_SMTC */
 	PTR_LA	v1, except_vec_vi_handler
 FEXPORT(except_vec_vi_lui)
 	lui	v0, 0		/* Patched */
@@ -277,37 +254,10 @@ EXPORT(except_vec_vi_end)
 NESTED(except_vec_vi_handler, 0, sp)
 	SAVE_TEMP
 	SAVE_STATIC
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC has an interesting problem that interrupts are level-triggered,
-	 * and the CLI macro will clear EXL, potentially causing a duplicate
-	 * interrupt service invocation. So we need to clear the associated
-	 * IM bit of Status prior to doing CLI, and restore it after the
-	 * service routine has been invoked - we must assume that the
-	 * service routine will have cleared the state, and any active
-	 * level represents a new or otherwised unserviced event...
-	 */
-	mfc0	t1, CP0_STATUS
-	and	t0, a0, t1
-#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
-	mfc0	t2, CP0_TCCONTEXT
-	or	t2, t0, t2
-	mtc0	t2, CP0_TCCONTEXT
-#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
-	xor	t1, t1, t0
-	mtc0	t1, CP0_STATUS
-	_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
 	CLI
 #ifdef CONFIG_TRACE_IRQFLAGS
 	move	s0, v0
-#ifdef CONFIG_MIPS_MT_SMTC
-	move	s1, a0
-#endif
 	TRACE_IRQS_OFF
-#ifdef CONFIG_MIPS_MT_SMTC
-	move	a0, s1
-#endif
 	move	v0, s0
 #endif
 
@@ -496,9 +446,6 @@ NESTED(nmi_handler, PT_SIZE, sp)
 
 	.align	5
 	LEAF(handle_ri_rdhwr_vivt)
-#ifdef CONFIG_MIPS_MT_SMTC
-	PANIC_PIC("handle_ri_rdhwr_vivt called")
-#else
 	.set	push
 	.set	noat
 	.set	noreorder
@@ -517,7 +464,6 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.set	pop
 	bltz	k1, handle_ri	/* slow path */
 	/* fall thru */
-#endif
 	END(handle_ri_rdhwr_vivt)
 
 	LEAF(handle_ri_rdhwr)

arch/mips/kernel/head.S

@@ -35,33 +35,12 @@
 	 */
 	.macro	setup_c0_status set clr
 	.set	push
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * For SMTC, we need to set privilege and disable interrupts only for
-	 * the current TC, using the TCStatus register.
-	 */
-	mfc0	t0, CP0_TCSTATUS
-	/* Fortunately CU 0 is in the same place in both registers */
-	/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
-	li	t1, ST0_CU0 | 0x08001c00
-	or	t0, t1
-	/* Clear TKSU, leave IXMT */
-	xori	t0, 0x00001800
-	mtc0	t0, CP0_TCSTATUS
-	_ehb
-	/* We need to leave the global IE bit set, but clear EXL...*/
-	mfc0	t0, CP0_STATUS
-	or	t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr
-	xor	t0, ST0_EXL | ST0_ERL | \clr
-	mtc0	t0, CP0_STATUS
-#else
 	mfc0	t0, CP0_STATUS
 	or	t0, ST0_CU0|\set|0x1f|\clr
 	xor	t0, 0x1f|\clr
 	mtc0	t0, CP0_STATUS
 	.set	noreorder
 	sll	zero,3				# ehb
-#endif
 	.set	pop
 	.endm
 
@@ -115,24 +94,6 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	jr	t0
 0:
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * In SMTC kernel, "CLI" is thread-specific, in TCStatus.
-	 * We still need to enable interrupts globally in Status,
-	 * and clear EXL/ERL.
-	 *
-	 * TCContext is used to track interrupt levels under
-	 * service in SMTC kernel. Clear for boot TC before
-	 * allowing any interrupts.
-	 */
-	mtc0	zero, CP0_TCCONTEXT
-
-	mfc0	t0, CP0_STATUS
-	ori	t0, t0, 0xff1f
-	xori	t0, t0, 0x001e
-	mtc0	t0, CP0_STATUS
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 	PTR_LA		t0, __bss_start		# clear .bss
 	LONG_S		zero, (t0)
 	PTR_LA		t1, __bss_stop - LONGSIZE
@@ -164,25 +125,8 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
  * function after setting up the stack and gp registers.
  */
 NESTED(smp_bootstrap, 16, sp)
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * Read-modify-writes of Status must be atomic, and this
-	 * is one case where CLI is invoked without EXL being
-	 * necessarily set. The CLI and setup_c0_status will
-	 * in fact be redundant for all but the first TC of
-	 * each VPE being booted.
-	 */
-	DMT	10	# dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */
-	jal	mips_ihb
-#endif /* CONFIG_MIPS_MT_SMTC */
 	smp_slave_setup
 	setup_c0_status_sec
-#ifdef CONFIG_MIPS_MT_SMTC
-	andi	t2, t2, VPECONTROL_TE
-	beqz	t2, 2f
-	EMT		# emt
-2:
-#endif /* CONFIG_MIPS_MT_SMTC */
 	j	start_secondary
 	END(smp_bootstrap)
 #endif /* CONFIG_SMP */

arch/mips/kernel/i8259.c

@@ -42,9 +42,6 @@ static struct irq_chip i8259A_chip = {
 	.irq_disable		= disable_8259A_irq,
 	.irq_unmask		= enable_8259A_irq,
 	.irq_mask_ack		= mask_and_ack_8259A,
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-	.irq_set_affinity	= plat_set_irq_affinity,
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
 };
 
 /*
@@ -180,7 +177,6 @@ handle_real_irq:
 		outb(cached_master_mask, PIC_MASTER_IMR);
 		outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
 	}
-	smtc_im_ack_irq(irq);
 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
 

arch/mips/kernel/idle.c

@@ -229,18 +229,8 @@ void __init check_wait(void)
 	}
 }
 
-static void smtc_idle_hook(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-	void smtc_idle_loop_hook(void);
-
-	smtc_idle_loop_hook();
-#endif
-}
-
 void arch_cpu_idle(void)
 {
-	smtc_idle_hook();
 	if (cpu_wait)
 		cpu_wait();
 	else

arch/mips/kernel/irq-msc01.c

@@ -53,13 +53,9 @@ static inline void unmask_msc_irq(struct irq_data *d)
  */
 static void level_mask_and_ack_msc_irq(struct irq_data *d)
 {
-	unsigned int irq = d->irq;
-
 	mask_msc_irq(d);
 	if (!cpu_has_veic)
 		MSCIC_WRITE(MSC01_IC_EOI, 0);
-	/* This actually needs to be a call into platform code */
-	smtc_im_ack_irq(irq);
 }
 
 /*
@@ -78,7 +74,6 @@ static void edge_mask_and_ack_msc_irq(struct irq_data *d)
 		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT);
 		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r);
 	}
-	smtc_im_ack_irq(irq);
 }
 
 /*

arch/mips/kernel/irq.c

@@ -73,7 +73,6 @@ void free_irqno(unsigned int irq)
  */
 void ack_bad_irq(unsigned int irq)
 {
-	smtc_im_ack_irq(irq);
 	printk("unexpected IRQ # %d\n", irq);
 }
 
@@ -142,23 +141,7 @@ void __irq_entry do_IRQ(unsigned int irq)
 {
 	irq_enter();
 	check_stack_overflow();
-	if (!smtc_handle_on_other_cpu(irq))
-		generic_handle_irq(irq);
-	irq_exit();
-}
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-/*
- * To avoid inefficient and in some cases pathological re-checking of
- * IRQ affinity, we have this variant that skips the affinity check.
- */
-
-void __irq_entry do_IRQ_no_affinity(unsigned int irq)
-{
-	irq_enter();
-	smtc_im_backstop(irq);
 	generic_handle_irq(irq);
 	irq_exit();
 }
 
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */

arch/mips/kernel/mips-mt-fpaff.c

@@ -1,5 +1,5 @@
 /*
- * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels
+ * General MIPS MT support routines, usable in AP/SP and SMVP.
  * Copyright (C) 2005 Mips Technologies, Inc
  */
 #include <linux/cpu.h>

arch/mips/kernel/mips-mt.c

@@ -1,5 +1,5 @@
 /*
- * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels
+ * General MIPS MT support routines, usable in AP/SP and SMVP.
  * Copyright (C) 2005 Mips Technologies, Inc
  */
 
@@ -57,9 +57,6 @@ void mips_mt_regdump(unsigned long mvpctl)
 	int tc;
 	unsigned long haltval;
 	unsigned long tcstatval;
-#ifdef CONFIG_MIPS_MT_SMTC
-	void smtc_soft_dump(void);
-#endif /* CONFIG_MIPT_MT_SMTC */
 
 	local_irq_save(flags);
 	vpflags = dvpe();
@@ -116,9 +113,6 @@ void mips_mt_regdump(unsigned long mvpctl)
 		if (!haltval)
 			write_tc_c0_tchalt(0);
 	}
-#ifdef CONFIG_MIPS_MT_SMTC
-	smtc_soft_dump();
-#endif /* CONFIG_MIPT_MT_SMTC */
 	printk("===========================\n");
 	evpe(vpflags);
 	local_irq_restore(flags);
@@ -295,21 +289,11 @@ void mips_mt_set_cpuoptions(void)
 
 void mt_cflush_lockdown(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	void smtc_cflush_lockdown(void);
-
-	smtc_cflush_lockdown();
-#endif /* CONFIG_MIPS_MT_SMTC */
 	/* FILL IN VSMP and AP/SP VERSIONS HERE */
 }
 
 void mt_cflush_release(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	void smtc_cflush_release(void);
-
-	smtc_cflush_release();
-#endif /* CONFIG_MIPS_MT_SMTC */
 	/* FILL IN VSMP and AP/SP VERSIONS HERE */
 }
 

arch/mips/kernel/process.c

@@ -140,13 +140,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	 */
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC restores TCStatus after Status, and the CU bits
-	 * are aliased there.
-	 */
-	childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1);
-#endif
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
 #ifdef CONFIG_MIPS_MT_FPAFF

arch/mips/kernel/r4k_switch.S

@@ -87,18 +87,6 @@
 
 	PTR_ADDU	t0, $28, _THREAD_SIZE - 32
 	set_saved_sp	t0, t1, t2
-#ifdef CONFIG_MIPS_MT_SMTC
-	/* Read-modify-writes of Status must be atomic on a VPE */
-	mfc0	t2, CP0_TCSTATUS
-	ori	t1, t2, TCSTATUS_IXMT
-	mtc0	t1, CP0_TCSTATUS
-	andi	t2, t2, TCSTATUS_IXMT
-	_ehb
-	DMT	8				# dmt	t0
-	move	t1,ra
-	jal	mips_ihb
-	move	ra,t1
-#endif /* CONFIG_MIPS_MT_SMTC */
 	mfc0	t1, CP0_STATUS		/* Do we really need this? */
 	li	a3, 0xff01
 	and	t1, a3
@@ -107,18 +95,6 @@
 	and	a2, a3
 	or	a2, t1
 	mtc0	a2, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-	_ehb
-	andi	t0, t0, VPECONTROL_TE
-	beqz	t0, 1f
-	emt
-1:
-	mfc0	t1, CP0_TCSTATUS
-	xori	t1, t1, TCSTATUS_IXMT
-	or	t1, t1, t2
-	mtc0	t1, CP0_TCSTATUS
-	_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
 	move	v0, a0
 	jr	ra
 	END(resume)
@@ -176,19 +152,10 @@ LEAF(_restore_msa)
 #define FPU_DEFAULT  0x00000000
 
 LEAF(_init_fpu)
-#ifdef CONFIG_MIPS_MT_SMTC
-	/* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */
-	mfc0	t0, CP0_TCSTATUS
-	/* Bit position is the same for Status, TCStatus */
-	li	t1, ST0_CU1
-	or	t0, t1
-	mtc0	t0, CP0_TCSTATUS
-#else /* Normal MIPS CU1 enable */
 	mfc0	t0, CP0_STATUS
 	li	t1, ST0_CU1
 	or	t0, t1
 	mtc0	t0, CP0_STATUS
-#endif /* CONFIG_MIPS_MT_SMTC */
 	enable_fpu_hazard
 
 	li	t1, FPU_DEFAULT

arch/mips/kernel/rtlx-mt.c

@@ -36,7 +36,6 @@ static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
 	unsigned long flags;
 	int i;
 
-	/* Ought not to be strictly necessary for SMTC builds */
 	local_irq_save(flags);
 	vpeflags = dvpe();
 	set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);

arch/mips/kernel/smp-cmp.c

@@ -49,14 +49,11 @@ static void cmp_init_secondary(void)
 
 	/* Enable per-cpu interrupts: platform specific */
 
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 	if (cpu_has_mipsmt)
 		c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
 			TCBIND_CURVPE;
 #endif
-#ifdef CONFIG_MIPS_MT_SMTC
-	c->tc_id  = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
-#endif
 }
 
 static void cmp_smp_finish(void)
@@ -135,10 +132,6 @@ void __init cmp_smp_setup(void)
 		unsigned int mvpconf0 = read_c0_mvpconf0();
 
 		nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-#elif defined(CONFIG_MIPS_MT_SMTC)
-		unsigned int mvpconf0 = read_c0_mvpconf0();
-
-		nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
 #endif
 		smp_num_siblings = nvpe;
 	}

arch/mips/kernel/smp.c

@@ -43,10 +43,6 @@
 #include <asm/time.h>
 #include <asm/setup.h>
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
 
 int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
@@ -102,12 +98,6 @@ asmlinkage void start_secondary(void)
 {
 	unsigned int cpu;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/* Only do cpu_probe for first TC of CPU */
-	if ((read_c0_tcbind() & TCBIND_CURTC) != 0)
-		__cpu_name[smp_processor_id()] = __cpu_name[0];
-	else
-#endif /* CONFIG_MIPS_MT_SMTC */
 	cpu_probe();
 	cpu_report();
 	per_cpu_trap_init(false);
@@ -238,13 +228,10 @@ static void flush_tlb_mm_ipi(void *mm)
  *  o collapses to normal function call on UP kernels
  *  o collapses to normal function call on systems with a single shared
  *    primary cache.
- *  o CONFIG_MIPS_MT_SMTC currently implies there is only one physical core.
  */
 static inline void smp_on_other_tlbs(void (*func) (void *info), void *info)
 {
-#ifndef CONFIG_MIPS_MT_SMTC
 	smp_call_function(func, info, 1);
-#endif
 }
 
 static inline void smp_on_each_tlb(void (*func) (void *info), void *info)

arch/mips/kernel/smtc-asm.S

@@ -1,133 +0,0 @@
-/*
- * Assembly Language Functions for MIPS MT SMTC support
- */
-
-/*
- * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */
-
-#include <asm/regdef.h>
-#include <asm/asmmacro.h>
-#include <asm/stackframe.h>
-#include <asm/irqflags.h>
-
-/*
- * "Software Interrupt" linkage.
- *
- * This is invoked when an "Interrupt" is sent from one TC to another,
- * where the TC to be interrupted is halted, has it's Restart address
- * and Status values saved by the "remote control" thread, then modified
- * to cause execution to begin here, in kenel mode. This code then
- * disguises the TC state as that of an exception and transfers
- * control to the general exception or vectored interrupt handler.
- */
-	.set noreorder
-
-/*
-The __smtc_ipi_vector would use k0 and k1 as temporaries and
-1) Set EXL (this is per-VPE, so this can't be done by proxy!)
-2) Restore the K/CU and IXMT bits to the pre "exception" state
-   (EXL means no interrupts and access to the kernel map).
-3) Set EPC to be the saved value of TCRestart.
-4) Jump to the exception handler entry point passed by the sender.
-
-CAN WE PROVE THAT WE WON'T DO THIS IF INTS DISABLED??
-*/
-
-/*
- * Reviled and slandered vision: Set EXL and restore K/CU/IXMT
- * state of pre-halt thread, then save everything and call
- * thought some function pointer to imaginary_exception, which
- * will parse a register value or memory message queue to
- * deliver things like interprocessor interrupts. On return
- * from that function, jump to the global ret_from_irq code
- * to invoke the scheduler and return as appropriate.
- */
-
-#define PT_PADSLOT4 (PT_R0-8)
-#define PT_PADSLOT5 (PT_R0-4)
-
-	.text
-	.align 5
-FEXPORT(__smtc_ipi_vector)
-#ifdef CONFIG_CPU_MICROMIPS
-	nop
-#endif
-	.set	noat
-	/* Disable thread scheduling to make Status update atomic */
-	DMT	27					# dmt	k1
-	_ehb
-	/* Set EXL */
-	mfc0	k0,CP0_STATUS
-	ori	k0,k0,ST0_EXL
-	mtc0	k0,CP0_STATUS
-	_ehb
-	/* Thread scheduling now inhibited by EXL. Restore TE state. */
-	andi	k1,k1,VPECONTROL_TE
-	beqz	k1,1f
-	emt
-1:
-	/*
-	 * The IPI sender has put some information on the anticipated
-	 * kernel stack frame.	If we were in user mode, this will be
-	 * built above the saved kernel SP.  If we were already in the
-	 * kernel, it will be built above the current CPU SP.
-	 *
-	 * Were we in kernel mode, as indicated by CU0?
-	 */
-	sll	k1,k0,3
-	.set noreorder
-	bltz	k1,2f
-	move	k1,sp
-	.set reorder
-	/*
-	 * If previously in user mode, set CU0 and use kernel stack.
-	 */
-	li	k1,ST0_CU0
-	or	k1,k1,k0
-	mtc0	k1,CP0_STATUS
-	_ehb
-	get_saved_sp
-	/* Interrupting TC will have pre-set values in slots in the new frame */
-2:	subu	k1,k1,PT_SIZE
-	/* Load TCStatus Value */
-	lw	k0,PT_TCSTATUS(k1)
-	/* Write it to TCStatus to restore CU/KSU/IXMT state */
-	mtc0	k0,$2,1
-	_ehb
-	lw	k0,PT_EPC(k1)
-	mtc0	k0,CP0_EPC
-	/* Save all will redundantly recompute the SP, but use it for now */
-	SAVE_ALL
-	CLI
-	TRACE_IRQS_OFF
-	/* Function to be invoked passed stack pad slot 5 */
-	lw	t0,PT_PADSLOT5(sp)
-	/* Argument from sender passed in stack pad slot 4 */
-	lw	a0,PT_PADSLOT4(sp)
-	LONG_L	s0, TI_REGS($28)
-	LONG_S	sp, TI_REGS($28)
-	PTR_LA	ra, ret_from_irq
-	jr	t0
-
-/*
- * Called from idle loop to provoke processing of queued IPIs
- * First IPI message in queue passed as argument.
- */
-
-LEAF(self_ipi)
-	/* Before anything else, block interrupts */
-	mfc0	t0,CP0_TCSTATUS
-	ori	t1,t0,TCSTATUS_IXMT
-	mtc0	t1,CP0_TCSTATUS
-	_ehb
-	/* We know we're in kernel mode, so prepare stack frame */
-	subu	t1,sp,PT_SIZE
-	sw	ra,PT_EPC(t1)
-	sw	a0,PT_PADSLOT4(t1)
-	la	t2,ipi_decode
-	sw	t2,PT_PADSLOT5(t1)
-	/* Save pre-disable value of TCStatus */
-	sw	t0,PT_TCSTATUS(t1)
-	j	__smtc_ipi_vector
-	nop
-END(self_ipi)

arch/mips/kernel/smtc-proc.c

@@ -1,102 +0,0 @@
-/*
- * /proc hooks for SMTC kernel
- * Copyright (C) 2005 Mips Technologies, Inc
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <linux/atomic.h>
-#include <asm/hardirq.h>
-#include <asm/mmu_context.h>
-#include <asm/mipsregs.h>
-#include <asm/cacheflush.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-#include <asm/smtc_proc.h>
-
-/*
- * /proc diagnostic and statistics hooks
- */
-
-/*
- * Statistics gathered
- */
-unsigned long selfipis[NR_CPUS];
-
-struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
-
-atomic_t smtc_fpu_recoveries;
-
-static int smtc_proc_show(struct seq_file *m, void *v)
-{
-	int i;
-	extern unsigned long ebase;
-
-	seq_printf(m, "SMTC Status Word: 0x%08x\n", smtc_status);
-	seq_printf(m, "Config7: 0x%08x\n", read_c0_config7());
-	seq_printf(m, "EBASE: 0x%08lx\n", ebase);
-	seq_printf(m, "Counter Interrupts taken per CPU (TC)\n");
-	for (i=0; i < NR_CPUS; i++)
-		seq_printf(m, "%d: %ld\n", i, smtc_cpu_stats[i].timerints);
-	seq_printf(m, "Self-IPIs by CPU:\n");
-	for(i = 0; i < NR_CPUS; i++)
-		seq_printf(m, "%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
-	seq_printf(m, "%d Recoveries of \"stolen\" FPU\n",
-		   atomic_read(&smtc_fpu_recoveries));
-	return 0;
-}
-
-static int smtc_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, smtc_proc_show, NULL);
-}
-
-static const struct file_operations smtc_proc_fops = {
-	.open		= smtc_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-void init_smtc_stats(void)
-{
-	int i;
-
-	for (i=0; i<NR_CPUS; i++) {
-		smtc_cpu_stats[i].timerints = 0;
-		smtc_cpu_stats[i].selfipis = 0;
-	}
-
-	atomic_set(&smtc_fpu_recoveries, 0);
-
-	proc_create("smtc", 0444, NULL, &smtc_proc_fops);
-}
-
-static int proc_cpuinfo_chain_call(struct notifier_block *nfb,
-	unsigned long action_unused, void *data)
-{
-	struct proc_cpuinfo_notifier_args *pcn = data;
-	struct seq_file *m = pcn->m;
-	unsigned long n = pcn->n;
-
-	if (!cpu_has_mipsmt)
-		return NOTIFY_OK;
-
-	seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
-	seq_printf(m, "TC\t\t\t: %d\n", cpu_data[n].tc_id);
-
-	return NOTIFY_OK;
-}
-
-static int __init proc_cpuinfo_notifier_init(void)
-{
-	return proc_cpuinfo_notifier(proc_cpuinfo_chain_call, 0);
-}
-
-subsys_initcall(proc_cpuinfo_notifier_init);

arch/mips/kernel/smtc.c

@@ -1,1528 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Copyright (C) 2004 Mips Technologies, Inc
- * Copyright (C) 2008 Kevin D. Kissell
- */
-
-#include <linux/clockchips.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/ftrace.h>
-#include <linux/slab.h>
-
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <linux/atomic.h>
-#include <asm/hardirq.h>
-#include <asm/hazards.h>
-#include <asm/irq.h>
-#include <asm/idle.h>
-#include <asm/mmu_context.h>
-#include <asm/mipsregs.h>
-#include <asm/cacheflush.h>
-#include <asm/time.h>
-#include <asm/addrspace.h>
-#include <asm/smtc.h>
-#include <asm/smtc_proc.h>
-#include <asm/setup.h>
-
-/*
- * SMTC Kernel needs to manipulate low-level CPU interrupt mask
- * in do_IRQ. These are passed in setup_irq_smtc() and stored
- * in this table.
- */
-unsigned long irq_hwmask[NR_IRQS];
-
-#define LOCK_MT_PRA() \
-	local_irq_save(flags); \
-	mtflags = dmt()
-
-#define UNLOCK_MT_PRA() \
-	emt(mtflags); \
-	local_irq_restore(flags)
-
-#define LOCK_CORE_PRA() \
-	local_irq_save(flags); \
-	mtflags = dvpe()
-
-#define UNLOCK_CORE_PRA() \
-	evpe(mtflags); \
-	local_irq_restore(flags)
-
-/*
- * Data structures purely associated with SMTC parallelism
- */
-
-
-/*
- * Table for tracking ASIDs whose lifetime is prolonged.
- */
-
-asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
-
-/*
- * Number of InterProcessor Interrupt (IPI) message buffers to allocate
- */
-
-#define IPIBUF_PER_CPU 4
-
-struct smtc_ipi_q IPIQ[NR_CPUS];
-static struct smtc_ipi_q freeIPIq;
-
-
-/*
- * Number of FPU contexts for each VPE
- */
-
-static int smtc_nconf1[MAX_SMTC_VPES];
-
-
-/* Forward declarations */
-
-void ipi_decode(struct smtc_ipi *);
-static void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
-static void setup_cross_vpe_interrupts(unsigned int nvpe);
-void init_smtc_stats(void);
-
-/* Global SMTC Status */
-
-unsigned int smtc_status;
-
-/* Boot command line configuration overrides */
-
-static int vpe0limit;
-static int ipibuffers;
-static int nostlb;
-static int asidmask;
-unsigned long smtc_asid_mask = 0xff;
-
-static int __init vpe0tcs(char *str)
-{
-	get_option(&str, &vpe0limit);
-
-	return 1;
-}
-
-static int __init ipibufs(char *str)
-{
-	get_option(&str, &ipibuffers);
-	return 1;
-}
-
-static int __init stlb_disable(char *s)
-{
-	nostlb = 1;
-	return 1;
-}
-
-static int __init asidmask_set(char *str)
-{
-	get_option(&str, &asidmask);
-	switch (asidmask) {
-	case 0x1:
-	case 0x3:
-	case 0x7:
-	case 0xf:
-	case 0x1f:
-	case 0x3f:
-	case 0x7f:
-	case 0xff:
-		smtc_asid_mask = (unsigned long)asidmask;
-		break;
-	default:
-		printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask);
-	}
-	return 1;
-}
-
-__setup("vpe0tcs=", vpe0tcs);
-__setup("ipibufs=", ipibufs);
-__setup("nostlb", stlb_disable);
-__setup("asidmask=", asidmask_set);
-
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
-
-static int hang_trig;
-
-static int __init hangtrig_enable(char *s)
-{
-	hang_trig = 1;
-	return 1;
-}
-
-
-__setup("hangtrig", hangtrig_enable);
-
-#define DEFAULT_BLOCKED_IPI_LIMIT 32
-
-static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT;
-
-static int __init tintq(char *str)
-{
-	get_option(&str, &timerq_limit);
-	return 1;
-}
-
-__setup("tintq=", tintq);
-
-static int imstuckcount[MAX_SMTC_VPES][8];
-/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
-static int vpemask[MAX_SMTC_VPES][8] = {
-	{0, 0, 1, 0, 0, 0, 0, 1},
-	{0, 0, 0, 0, 0, 0, 0, 1}
-};
-int tcnoprog[NR_CPUS];
-static atomic_t idle_hook_initialized = ATOMIC_INIT(0);
-static int clock_hang_reported[NR_CPUS];
-
-#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-
-/*
- * Configure shared TLB - VPC configuration bit must be set by caller
- */
-
-static void smtc_configure_tlb(void)
-{
-	int i, tlbsiz, vpes;
-	unsigned long mvpconf0;
-	unsigned long config1val;
-
-	/* Set up ASID preservation table */
-	for (vpes=0; vpes<MAX_SMTC_TLBS; vpes++) {
-	    for(i = 0; i < MAX_SMTC_ASIDS; i++) {
-		smtc_live_asid[vpes][i] = 0;
-	    }
-	}
-	mvpconf0 = read_c0_mvpconf0();
-
-	if ((vpes = ((mvpconf0 & MVPCONF0_PVPE)
-			>> MVPCONF0_PVPE_SHIFT) + 1) > 1) {
-	    /* If we have multiple VPEs, try to share the TLB */
-	    if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) {
-		/*
-		 * If TLB sizing is programmable, shared TLB
-		 * size is the total available complement.
-		 * Otherwise, we have to take the sum of all
-		 * static VPE TLB entries.
-		 */
-		if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE)
-				>> MVPCONF0_PTLBE_SHIFT)) == 0) {
-		    /*
-		     * If there's more than one VPE, there had better
-		     * be more than one TC, because we need one to bind
-		     * to each VPE in turn to be able to read
-		     * its configuration state!
-		     */
-		    settc(1);
-		    /* Stop the TC from doing anything foolish */
-		    write_tc_c0_tchalt(TCHALT_H);
-		    mips_ihb();
-		    /* No need to un-Halt - that happens later anyway */
-		    for (i=0; i < vpes; i++) {
-			write_tc_c0_tcbind(i);
-			/*
-			 * To be 100% sure we're really getting the right
-			 * information, we exit the configuration state
-			 * and do an IHB after each rebinding.
-			 */
-			write_c0_mvpcontrol(
-				read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
-			mips_ihb();
-			/*
-			 * Only count if the MMU Type indicated is TLB
-			 */
-			if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
-				config1val = read_vpe_c0_config1();
-				tlbsiz += ((config1val >> 25) & 0x3f) + 1;
-			}
-
-			/* Put core back in configuration state */
-			write_c0_mvpcontrol(
-				read_c0_mvpcontrol() | MVPCONTROL_VPC );
-			mips_ihb();
-		    }
-		}
-		write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
-		ehb();
-
-		/*
-		 * Setup kernel data structures to use software total,
-		 * rather than read the per-VPE Config1 value. The values
-		 * for "CPU 0" gets copied to all the other CPUs as part
-		 * of their initialization in smtc_cpu_setup().
-		 */
-
-		/* MIPS32 limits TLB indices to 64 */
-		if (tlbsiz > 64)
-			tlbsiz = 64;
-		cpu_data[0].tlbsize = current_cpu_data.tlbsize = tlbsiz;
-		smtc_status |= SMTC_TLB_SHARED;
-		local_flush_tlb_all();
-
-		printk("TLB of %d entry pairs shared by %d VPEs\n",
-			tlbsiz, vpes);
-	    } else {
-		printk("WARNING: TLB Not Sharable on SMTC Boot!\n");
-	    }
-	}
-}
-
-
-/*
- * Incrementally build the CPU map out of constituent MIPS MT cores,
- * using the specified available VPEs and TCs.	Plaform code needs
- * to ensure that each MIPS MT core invokes this routine on reset,
- * one at a time(!).
- *
- * This version of the build_cpu_map and prepare_cpus routines assumes
- * that *all* TCs of a MIPS MT core will be used for Linux, and that
- * they will be spread across *all* available VPEs (to minimise the
- * loss of efficiency due to exception service serialization).
- * An improved version would pick up configuration information and
- * possibly leave some TCs/VPEs as "slave" processors.
- *
- * Use c0_MVPConf0 to find out how many TCs are available, setting up
- * cpu_possible_mask and the logical/physical mappings.
- */
-
-int __init smtc_build_cpu_map(int start_cpu_slot)
-{
-	int i, ntcs;
-
-	/*
-	 * The CPU map isn't actually used for anything at this point,
-	 * so it's not clear what else we should do apart from set
-	 * everything up so that "logical" = "physical".
-	 */
-	ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
-	for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
-		set_cpu_possible(i, true);
-		__cpu_number_map[i] = i;
-		__cpu_logical_map[i] = i;
-	}
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* Initialize map of CPUs with FPUs */
-	cpus_clear(mt_fpu_cpumask);
-#endif
-
-	/* One of those TC's is the one booting, and not a secondary... */
-	printk("%i available secondary CPU TC(s)\n", i - 1);
-
-	return i;
-}
-
-/*
- * Common setup before any secondaries are started
- * Make sure all CPUs are in a sensible state before we boot any of the
- * secondaries.
- *
- * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
- * as possible across the available VPEs.
- */
-
-static void smtc_tc_setup(int vpe, int tc, int cpu)
-{
-	static int cp1contexts[MAX_SMTC_VPES];
-
-	/*
-	 * Make a local copy of the available FPU contexts in order
-	 * to keep track of TCs that can have one.
-	 */
-	if (tc == 1)
-	{
-		/*
-		 * FIXME: Multi-core SMTC hasn't been tested and the
-		 *	  maximum number of VPEs may change.
-		 */
-		cp1contexts[0] = smtc_nconf1[0] - 1;
-		cp1contexts[1] = smtc_nconf1[1];
-	}
-
-	settc(tc);
-	write_tc_c0_tchalt(TCHALT_H);
-	mips_ihb();
-	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
-			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
-			| TCSTATUS_A);
-	/*
-	 * TCContext gets an offset from the base of the IPIQ array
-	 * to be used in low-level code to detect the presence of
-	 * an active IPI queue.
-	 */
-	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
-
-	/* Bind TC to VPE. */
-	write_tc_c0_tcbind(vpe);
-
-	/* In general, all TCs should have the same cpu_data indications. */
-	memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
-
-	/* Check to see if there is a FPU context available for this TC. */
-	if (!cp1contexts[vpe])
-		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
-	else
-		cp1contexts[vpe]--;
-
-	/* Store the TC and VPE into the cpu_data structure. */
-	cpu_data[cpu].vpe_id = vpe;
-	cpu_data[cpu].tc_id = tc;
-
-	/* FIXME: Multi-core SMTC hasn't been tested, but be prepared. */
-	cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
-}
-
-/*
- * Tweak to get Count registers synced as closely as possible. The
- * value seems good for 34K-class cores.
- */
-
-#define CP0_SKEW 8
-
-void smtc_prepare_cpus(int cpus)
-{
-	int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
-	unsigned long flags;
-	unsigned long val;
-	int nipi;
-	struct smtc_ipi *pipi;
-
-	/* disable interrupts so we can disable MT */
-	local_irq_save(flags);
-	/* disable MT so we can configure */
-	dvpe();
-	dmt();
-
-	spin_lock_init(&freeIPIq.lock);
-
-	/*
-	 * We probably don't have as many VPEs as we do SMP "CPUs",
-	 * but it's possible - and in any case we'll never use more!
-	 */
-	for (i=0; i<NR_CPUS; i++) {
-		IPIQ[i].head = IPIQ[i].tail = NULL;
-		spin_lock_init(&IPIQ[i].lock);
-		IPIQ[i].depth = 0;
-		IPIQ[i].resched_flag = 0; /* No reschedules queued initially */
-	}
-
-	/* cpu_data index starts at zero */
-	cpu = 0;
-	cpu_data[cpu].vpe_id = 0;
-	cpu_data[cpu].tc_id = 0;
-	cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
-	cpu++;
-
-	/* Report on boot-time options */
-	mips_mt_set_cpuoptions();
-	if (vpelimit > 0)
-		printk("Limit of %d VPEs set\n", vpelimit);
-	if (tclimit > 0)
-		printk("Limit of %d TCs set\n", tclimit);
-	if (nostlb) {
-		printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n");
-	}
-	if (asidmask)
-		printk("ASID mask value override to 0x%x\n", asidmask);
-
-	/* Temporary */
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
-	if (hang_trig)
-		printk("Logic Analyser Trigger on suspected TC hang\n");
-#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-
-	/* Put MVPE's into 'configuration state' */
-	write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC );
-
-	val = read_c0_mvpconf0();
-	nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-	if (vpelimit > 0 && nvpe > vpelimit)
-		nvpe = vpelimit;
-	ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
-	if (ntc > NR_CPUS)
-		ntc = NR_CPUS;
-	if (tclimit > 0 && ntc > tclimit)
-		ntc = tclimit;
-	slop = ntc % nvpe;
-	for (i = 0; i < nvpe; i++) {
-		tcpervpe[i] = ntc / nvpe;
-		if (slop) {
-			if((slop - i) > 0) tcpervpe[i]++;
-		}
-	}
-	/* Handle command line override for VPE0 */
-	if (vpe0limit > ntc) vpe0limit = ntc;
-	if (vpe0limit > 0) {
-		int slopslop;
-		if (vpe0limit < tcpervpe[0]) {
-		    /* Reducing TC count - distribute to others */
-		    slop = tcpervpe[0] - vpe0limit;
-		    slopslop = slop % (nvpe - 1);
-		    tcpervpe[0] = vpe0limit;
-		    for (i = 1; i < nvpe; i++) {
-			tcpervpe[i] += slop / (nvpe - 1);
-			if(slopslop && ((slopslop - (i - 1) > 0)))
-				tcpervpe[i]++;
-		    }
-		} else if (vpe0limit > tcpervpe[0]) {
-		    /* Increasing TC count - steal from others */
-		    slop = vpe0limit - tcpervpe[0];
-		    slopslop = slop % (nvpe - 1);
-		    tcpervpe[0] = vpe0limit;
-		    for (i = 1; i < nvpe; i++) {
-			tcpervpe[i] -= slop / (nvpe - 1);
-			if(slopslop && ((slopslop - (i - 1) > 0)))
-				tcpervpe[i]--;
-		    }
-		}
-	}
-
-	/* Set up shared TLB */
-	smtc_configure_tlb();
-
-	for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
-		/* Get number of CP1 contexts for each VPE. */
-		if (tc == 0)
-		{
-			/*
-			 * Do not call settc() for TC0 or the FPU context
-			 * value will be incorrect. Besides, we know that
-			 * we are TC0 anyway.
-			 */
-			smtc_nconf1[0] = ((read_vpe_c0_vpeconf1() &
-				VPECONF1_NCP1) >> VPECONF1_NCP1_SHIFT);
-			if (nvpe == 2)
-			{
-				settc(1);
-				smtc_nconf1[1] = ((read_vpe_c0_vpeconf1() &
-					VPECONF1_NCP1) >> VPECONF1_NCP1_SHIFT);
-				settc(0);
-			}
-		}
-		if (tcpervpe[vpe] == 0)
-			continue;
-		if (vpe != 0)
-			printk(", ");
-		printk("VPE %d: TC", vpe);
-		for (i = 0; i < tcpervpe[vpe]; i++) {
-			/*
-			 * TC 0 is bound to VPE 0 at reset,
-			 * and is presumably executing this
-			 * code.  Leave it alone!
-			 */
-			if (tc != 0) {
-				smtc_tc_setup(vpe, tc, cpu);
-				if (vpe != 0) {
-					/*
-					 * Set MVP bit (possibly again).  Do it
-					 * here to catch CPUs that have no TCs
-					 * bound to the VPE at reset.  In that
-					 * case, a TC must be bound to the VPE
-					 * before we can set VPEControl[MVP]
-					 */
-					write_vpe_c0_vpeconf0(
-						read_vpe_c0_vpeconf0() |
-						VPECONF0_MVP);
-				}
-				cpu++;
-			}
-			printk(" %d", tc);
-			tc++;
-		}
-		if (vpe != 0) {
-			/*
-			 * Allow this VPE to control others.
-			 */
-			write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
-					      VPECONF0_MVP);
-
-			/*
-			 * Clear any stale software interrupts from VPE's Cause
-			 */
-			write_vpe_c0_cause(0);
-
-			/*
-			 * Clear ERL/EXL of VPEs other than 0
-			 * and set restricted interrupt enable/mask.
-			 */
-			write_vpe_c0_status((read_vpe_c0_status()
-				& ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM))
-				| (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7
-				| ST0_IE));
-			/*
-			 * set config to be the same as vpe0,
-			 *  particularly kseg0 coherency alg
-			 */
-			write_vpe_c0_config(read_c0_config());
-			/* Clear any pending timer interrupt */
-			write_vpe_c0_compare(0);
-			/* Propagate Config7 */
-			write_vpe_c0_config7(read_c0_config7());
-			write_vpe_c0_count(read_c0_count() + CP0_SKEW);
-			ehb();
-		}
-		/* enable multi-threading within VPE */
-		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
-		/* enable the VPE */
-		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
-	}
-
-	/*
-	 * Pull any physically present but unused TCs out of circulation.
-	 */
-	while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
-		set_cpu_possible(tc, false);
-		set_cpu_present(tc, false);
-		tc++;
-	}
-
-	/* release config state */
-	write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
-
-	printk("\n");
-
-	/* Set up coprocessor affinity CPU mask(s) */
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	for (tc = 0; tc < ntc; tc++) {
-		if (cpu_data[tc].options & MIPS_CPU_FPU)
-			cpu_set(tc, mt_fpu_cpumask);
-	}
-#endif
-
-	/* set up ipi interrupts... */
-
-	/* If we have multiple VPEs running, set up the cross-VPE interrupt */
-
-	setup_cross_vpe_interrupts(nvpe);
-
-	/* Set up queue of free IPI "messages". */
-	nipi = NR_CPUS * IPIBUF_PER_CPU;
-	if (ipibuffers > 0)
-		nipi = ipibuffers;
-
-	pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL);
-	if (pipi == NULL)
-		panic("kmalloc of IPI message buffers failed");
-	else
-		printk("IPI buffer pool of %d buffers\n", nipi);
-	for (i = 0; i < nipi; i++) {
-		smtc_ipi_nq(&freeIPIq, pipi);
-		pipi++;
-	}
-
-	/* Arm multithreading and enable other VPEs - but all TCs are Halted */
-	emt(EMT_ENABLE);
-	evpe(EVPE_ENABLE);
-	local_irq_restore(flags);
-	/* Initialize SMTC /proc statistics/diagnostics */
-	init_smtc_stats();
-}
-
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it
- * running!
- * smp_bootstrap is the place to resume from
- * __KSTK_TOS(idle) is apparently the stack pointer
- * (unsigned long)idle->thread_info the gp
- *
- */
-void smtc_boot_secondary(int cpu, struct task_struct *idle)
-{
-	extern u32 kernelsp[NR_CPUS];
-	unsigned long flags;
-	int mtflags;
-
-	LOCK_MT_PRA();
-	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		dvpe();
-	}
-	settc(cpu_data[cpu].tc_id);
-
-	/* pc */
-	write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
-
-	/* stack pointer */
-	kernelsp[cpu] = __KSTK_TOS(idle);
-	write_tc_gpr_sp(__KSTK_TOS(idle));
-
-	/* global pointer */
-	write_tc_gpr_gp((unsigned long)task_thread_info(idle));
-
-	smtc_status |= SMTC_MTC_ACTIVE;
-	write_tc_c0_tchalt(0);
-	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		evpe(EVPE_ENABLE);
-	}
-	UNLOCK_MT_PRA();
-}
-
-void smtc_init_secondary(void)
-{
-}
-
-void smtc_smp_finish(void)
-{
-	int cpu = smp_processor_id();
-
-	/*
-	 * Lowest-numbered CPU per VPE starts a clock tick.
-	 * Like per_cpu_trap_init() hack, this assumes that
-	 * SMTC init code assigns TCs consdecutively and
-	 * in ascending order across available VPEs.
-	 */
-	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
-		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
-
-	local_irq_enable();
-
-	printk("TC %d going on-line as CPU %d\n",
-		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
-}
-
-void smtc_cpus_done(void)
-{
-}
-
-/*
- * Support for SMTC-optimized driver IRQ registration
- */
-
-/*
- * SMTC Kernel needs to manipulate low-level CPU interrupt mask
- * in do_IRQ. These are passed in setup_irq_smtc() and stored
- * in this table.
- */
-
-int setup_irq_smtc(unsigned int irq, struct irqaction * new,
-			unsigned long hwmask)
-{
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
-	unsigned int vpe = current_cpu_data.vpe_id;
-
-	vpemask[vpe][irq - MIPS_CPU_IRQ_BASE] = 1;
-#endif
-	irq_hwmask[irq] = hwmask;
-
-	return setup_irq(irq, new);
-}
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-/*
- * Support for IRQ affinity to TCs
- */
-
-void smtc_set_irq_affinity(unsigned int irq, cpumask_t affinity)
-{
-	/*
-	 * If a "fast path" cache of quickly decodable affinity state
-	 * is maintained, this is where it gets done, on a call up
-	 * from the platform affinity code.
-	 */
-}
-
-void smtc_forward_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-	int target;
-
-	/*
-	 * OK wise guy, now figure out how to get the IRQ
-	 * to be serviced on an authorized "CPU".
-	 *
-	 * Ideally, to handle the situation where an IRQ has multiple
-	 * eligible CPUS, we would maintain state per IRQ that would
-	 * allow a fair distribution of service requests.  Since the
-	 * expected use model is any-or-only-one, for simplicity
-	 * and efficiency, we just pick the easiest one to find.
-	 */
-
-	target = cpumask_first(d->affinity);
-
-	/*
-	 * We depend on the platform code to have correctly processed
-	 * IRQ affinity change requests to ensure that the IRQ affinity
-	 * mask has been purged of bits corresponding to nonexistent and
-	 * offline "CPUs", and to TCs bound to VPEs other than the VPE
-	 * connected to the physical interrupt input for the interrupt
-	 * in question.	 Otherwise we have a nasty problem with interrupt
-	 * mask management.  This is best handled in non-performance-critical
-	 * platform IRQ affinity setting code,	to minimize interrupt-time
-	 * checks.
-	 */
-
-	/* If no one is eligible, service locally */
-	if (target >= NR_CPUS)
-		do_IRQ_no_affinity(irq);
-	else
-		smtc_send_ipi(target, IRQ_AFFINITY_IPI, irq);
-}
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
-/*
- * IPI model for SMTC is tricky, because interrupts aren't TC-specific.
- * Within a VPE one TC can interrupt another by different approaches.
- * The easiest to get right would probably be to make all TCs except
- * the target IXMT and set a software interrupt, but an IXMT-based
- * scheme requires that a handler must run before a new IPI could
- * be sent, which would break the "broadcast" loops in MIPS MT.
- * A more gonzo approach within a VPE is to halt the TC, extract
- * its Restart, Status, and a couple of GPRs, and program the Restart
- * address to emulate an interrupt.
- *
- * Within a VPE, one can be confident that the target TC isn't in
- * a critical EXL state when halted, since the write to the Halt
- * register could not have issued on the writing thread if the
- * halting thread had EXL set. So k0 and k1 of the target TC
- * can be used by the injection code.  Across VPEs, one can't
- * be certain that the target TC isn't in a critical exception
- * state. So we try a two-step process of sending a software
- * interrupt to the target VPE, which either handles the event
- * itself (if it was the target) or injects the event within
- * the VPE.
- */
-
-static void smtc_ipi_qdump(void)
-{
-	int i;
-	struct smtc_ipi *temp;
-
-	for (i = 0; i < NR_CPUS ;i++) {
-		pr_info("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n",
-			i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail,
-			IPIQ[i].depth);
-		temp = IPIQ[i].head;
-
-		while (temp != IPIQ[i].tail) {
-			pr_debug("%d %d %d: ", temp->type, temp->dest,
-			       (int)temp->arg);
-#ifdef	SMTC_IPI_DEBUG
-		    pr_debug("%u %lu\n", temp->sender, temp->stamp);
-#else
-		    pr_debug("\n");
-#endif
-		    temp = temp->flink;
-		}
-	}
-}
-
-/*
- * The standard atomic.h primitives don't quite do what we want
- * here: We need an atomic add-and-return-previous-value (which
- * could be done with atomic_add_return and a decrement) and an
- * atomic set/zero-and-return-previous-value (which can't really
- * be done with the atomic.h primitives). And since this is
- * MIPS MT, we can assume that we have LL/SC.
- */
-static inline int atomic_postincrement(atomic_t *v)
-{
-	unsigned long result;
-
-	unsigned long temp;
-
-	__asm__ __volatile__(
-	"1:	ll	%0, %2					\n"
-	"	addu	%1, %0, 1				\n"
-	"	sc	%1, %2					\n"
-	"	beqz	%1, 1b					\n"
-	__WEAK_LLSC_MB
-	: "=&r" (result), "=&r" (temp), "=m" (v->counter)
-	: "m" (v->counter)
-	: "memory");
-
-	return result;
-}
-
-void smtc_send_ipi(int cpu, int type, unsigned int action)
-{
-	int tcstatus;
-	struct smtc_ipi *pipi;
-	unsigned long flags;
-	int mtflags;
-	unsigned long tcrestart;
-	int set_resched_flag = (type == LINUX_SMP_IPI &&
-				action == SMP_RESCHEDULE_YOURSELF);
-
-	if (cpu == smp_processor_id()) {
-		printk("Cannot Send IPI to self!\n");
-		return;
-	}
-	if (set_resched_flag && IPIQ[cpu].resched_flag != 0)
-		return; /* There is a reschedule queued already */
-
-	/* Set up a descriptor, to be delivered either promptly or queued */
-	pipi = smtc_ipi_dq(&freeIPIq);
-	if (pipi == NULL) {
-		bust_spinlocks(1);
-		mips_mt_regdump(dvpe());
-		panic("IPI Msg. Buffers Depleted");
-	}
-	pipi->type = type;
-	pipi->arg = (void *)action;
-	pipi->dest = cpu;
-	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		/* If not on same VPE, enqueue and send cross-VPE interrupt */
-		IPIQ[cpu].resched_flag |= set_resched_flag;
-		smtc_ipi_nq(&IPIQ[cpu], pipi);
-		LOCK_CORE_PRA();
-		settc(cpu_data[cpu].tc_id);
-		write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1);
-		UNLOCK_CORE_PRA();
-	} else {
-		/*
-		 * Not sufficient to do a LOCK_MT_PRA (dmt) here,
-		 * since ASID shootdown on the other VPE may
-		 * collide with this operation.
-		 */
-		LOCK_CORE_PRA();
-		settc(cpu_data[cpu].tc_id);
-		/* Halt the targeted TC */
-		write_tc_c0_tchalt(TCHALT_H);
-		mips_ihb();
-
-		/*
-		 * Inspect TCStatus - if IXMT is set, we have to queue
-		 * a message. Otherwise, we set up the "interrupt"
-		 * of the other TC
-		 */
-		tcstatus = read_tc_c0_tcstatus();
-
-		if ((tcstatus & TCSTATUS_IXMT) != 0) {
-			/*
-			 * If we're in the the irq-off version of the wait
-			 * loop, we need to force exit from the wait and
-			 * do a direct post of the IPI.
-			 */
-			if (cpu_wait == r4k_wait_irqoff) {
-				tcrestart = read_tc_c0_tcrestart();
-				if (address_is_in_r4k_wait_irqoff(tcrestart)) {
-					write_tc_c0_tcrestart(__pastwait);
-					tcstatus &= ~TCSTATUS_IXMT;
-					write_tc_c0_tcstatus(tcstatus);
-					goto postdirect;
-				}
-			}
-			/*
-			 * Otherwise we queue the message for the target TC
-			 * to pick up when he does a local_irq_restore()
-			 */
-			write_tc_c0_tchalt(0);
-			UNLOCK_CORE_PRA();
-			IPIQ[cpu].resched_flag |= set_resched_flag;
-			smtc_ipi_nq(&IPIQ[cpu], pipi);
-		} else {
-postdirect:
-			post_direct_ipi(cpu, pipi);
-			write_tc_c0_tchalt(0);
-			UNLOCK_CORE_PRA();
-		}
-	}
-}
-
-/*
- * Send IPI message to Halted TC, TargTC/TargVPE already having been set
- */
-static void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
-{
-	struct pt_regs *kstack;
-	unsigned long tcstatus;
-	unsigned long tcrestart;
-	extern u32 kernelsp[NR_CPUS];
-	extern void __smtc_ipi_vector(void);
-//printk("%s: on %d for %d\n", __func__, smp_processor_id(), cpu);
-
-	/* Extract Status, EPC from halted TC */
-	tcstatus = read_tc_c0_tcstatus();
-	tcrestart = read_tc_c0_tcrestart();
-	/* If TCRestart indicates a WAIT instruction, advance the PC */
-	if ((tcrestart & 0x80000000)
-	    && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) {
-		tcrestart += 4;
-	}
-	/*
-	 * Save on TC's future kernel stack
-	 *
-	 * CU bit of Status is indicator that TC was
-	 * already running on a kernel stack...
-	 */
-	if (tcstatus & ST0_CU0)	 {
-		/* Note that this "- 1" is pointer arithmetic */
-		kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
-	} else {
-		kstack = ((struct pt_regs *)kernelsp[cpu]) - 1;
-	}
-
-	kstack->cp0_epc = (long)tcrestart;
-	/* Save TCStatus */
-	kstack->cp0_tcstatus = tcstatus;
-	/* Pass token of operation to be performed kernel stack pad area */
-	kstack->pad0[4] = (unsigned long)pipi;
-	/* Pass address of function to be called likewise */
-	kstack->pad0[5] = (unsigned long)&ipi_decode;
-	/* Set interrupt exempt and kernel mode */
-	tcstatus |= TCSTATUS_IXMT;
-	tcstatus &= ~TCSTATUS_TKSU;
-	write_tc_c0_tcstatus(tcstatus);
-	ehb();
-	/* Set TC Restart address to be SMTC IPI vector */
-	write_tc_c0_tcrestart(__smtc_ipi_vector);
-}
-
-static void ipi_resched_interrupt(void)
-{
-	scheduler_ipi();
-}
-
-static void ipi_call_interrupt(void)
-{
-	/* Invoke generic function invocation code in smp.c */
-	smp_call_function_interrupt();
-}
-
-DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-
-static void __irq_entry smtc_clock_tick_interrupt(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
-	int irq = MIPS_CPU_IRQ_BASE + 1;
-
-	irq_enter();
-	kstat_incr_irq_this_cpu(irq);
-	cd = &per_cpu(mips_clockevent_device, cpu);
-	cd->event_handler(cd);
-	irq_exit();
-}
-
-void ipi_decode(struct smtc_ipi *pipi)
-{
-	void *arg_copy = pipi->arg;
-	int type_copy = pipi->type;
-
-	smtc_ipi_nq(&freeIPIq, pipi);
-
-	switch (type_copy) {
-	case SMTC_CLOCK_TICK:
-		smtc_clock_tick_interrupt();
-		break;
-
-	case LINUX_SMP_IPI:
-		switch ((int)arg_copy) {
-		case SMP_RESCHEDULE_YOURSELF:
-			ipi_resched_interrupt();
-			break;
-		case SMP_CALL_FUNCTION:
-			ipi_call_interrupt();
-			break;
-		default:
-			printk("Impossible SMTC IPI Argument %p\n", arg_copy);
-			break;
-		}
-		break;
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-	case IRQ_AFFINITY_IPI:
-		/*
-		 * Accept a "forwarded" interrupt that was initially
-		 * taken by a TC who doesn't have affinity for the IRQ.
-		 */
-		do_IRQ_no_affinity((int)arg_copy);
-		break;
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-	default:
-		printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
-		break;
-	}
-}
-
-/*
- * Similar to smtc_ipi_replay(), but invoked from context restore,
- * so it reuses the current exception frame rather than set up a
- * new one with self_ipi.
- */
-
-void deferred_smtc_ipi(void)
-{
-	int cpu = smp_processor_id();
-
-	/*
-	 * Test is not atomic, but much faster than a dequeue,
-	 * and the vast majority of invocations will have a null queue.
-	 * If irq_disabled when this was called, then any IPIs queued
-	 * after we test last will be taken on the next irq_enable/restore.
-	 * If interrupts were enabled, then any IPIs added after the
-	 * last test will be taken directly.
-	 */
-
-	while (IPIQ[cpu].head != NULL) {
-		struct smtc_ipi_q *q = &IPIQ[cpu];
-		struct smtc_ipi *pipi;
-		unsigned long flags;
-
-		/*
-		 * It may be possible we'll come in with interrupts
-		 * already enabled.
-		 */
-		local_irq_save(flags);
-		spin_lock(&q->lock);
-		pipi = __smtc_ipi_dq(q);
-		spin_unlock(&q->lock);
-		if (pipi != NULL) {
-			if (pipi->type == LINUX_SMP_IPI &&
-			    (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
-				IPIQ[cpu].resched_flag = 0;
-			ipi_decode(pipi);
-		}
-		/*
-		 * The use of the __raw_local restore isn't
-		 * as obviously necessary here as in smtc_ipi_replay(),
-		 * but it's more efficient, given that we're already
-		 * running down the IPI queue.
-		 */
-		__arch_local_irq_restore(flags);
-	}
-}
-
-/*
- * Cross-VPE interrupts in the SMTC prototype use "software interrupts"
- * set via cross-VPE MTTR manipulation of the Cause register. It would be
- * in some regards preferable to have external logic for "doorbell" hardware
- * interrupts.
- */
-
-static int cpu_ipi_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_IRQ;
-
-static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
-{
-	int my_vpe = cpu_data[smp_processor_id()].vpe_id;
-	int my_tc = cpu_data[smp_processor_id()].tc_id;
-	int cpu;
-	struct smtc_ipi *pipi;
-	unsigned long tcstatus;
-	int sent;
-	unsigned long flags;
-	unsigned int mtflags;
-	unsigned int vpflags;
-
-	/*
-	 * So long as cross-VPE interrupts are done via
-	 * MFTR/MTTR read-modify-writes of Cause, we need
-	 * to stop other VPEs whenever the local VPE does
-	 * anything similar.
-	 */
-	local_irq_save(flags);
-	vpflags = dvpe();
-	clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ);
-	set_c0_status(0x100 << MIPS_CPU_IPI_IRQ);
-	irq_enable_hazard();
-	evpe(vpflags);
-	local_irq_restore(flags);
-
-	/*
-	 * Cross-VPE Interrupt handler: Try to directly deliver IPIs
-	 * queued for TCs on this VPE other than the current one.
-	 * Return-from-interrupt should cause us to drain the queue
-	 * for the current TC, so we ought not to have to do it explicitly here.
-	 */
-
-	for_each_online_cpu(cpu) {
-		if (cpu_data[cpu].vpe_id != my_vpe)
-			continue;
-
-		pipi = smtc_ipi_dq(&IPIQ[cpu]);
-		if (pipi != NULL) {
-			if (cpu_data[cpu].tc_id != my_tc) {
-				sent = 0;
-				LOCK_MT_PRA();
-				settc(cpu_data[cpu].tc_id);
-				write_tc_c0_tchalt(TCHALT_H);
-				mips_ihb();
-				tcstatus = read_tc_c0_tcstatus();
-				if ((tcstatus & TCSTATUS_IXMT) == 0) {
-					post_direct_ipi(cpu, pipi);
-					sent = 1;
-				}
-				write_tc_c0_tchalt(0);
-				UNLOCK_MT_PRA();
-				if (!sent) {
-					smtc_ipi_req(&IPIQ[cpu], pipi);
-				}
-			} else {
-				/*
-				 * ipi_decode() should be called
-				 * with interrupts off
-				 */
-				local_irq_save(flags);
-				if (pipi->type == LINUX_SMP_IPI &&
-				    (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
-					IPIQ[cpu].resched_flag = 0;
-				ipi_decode(pipi);
-				local_irq_restore(flags);
-			}
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void ipi_irq_dispatch(void)
-{
-	do_IRQ(cpu_ipi_irq);
-}
-
-static struct irqaction irq_ipi = {
-	.handler	= ipi_interrupt,
-	.flags		= IRQF_PERCPU,
-	.name		= "SMTC_IPI"
-};
-
-static void setup_cross_vpe_interrupts(unsigned int nvpe)
-{
-	if (nvpe < 1)
-		return;
-
-	if (!cpu_has_vint)
-		panic("SMTC Kernel requires Vectored Interrupt support");
-
-	set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
-
-	setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ));
-
-	irq_set_handler(cpu_ipi_irq, handle_percpu_irq);
-}
-
-/*
- * SMTC-specific hacks invoked from elsewhere in the kernel.
- */
-
- /*
-  * smtc_ipi_replay is called from raw_local_irq_restore
-  */
-
-void smtc_ipi_replay(void)
-{
-	unsigned int cpu = smp_processor_id();
-
-	/*
-	 * To the extent that we've ever turned interrupts off,
-	 * we may have accumulated deferred IPIs.  This is subtle.
-	 * we should be OK:  If we pick up something and dispatch
-	 * it here, that's great. If we see nothing, but concurrent
-	 * with this operation, another TC sends us an IPI, IXMT
-	 * is clear, and we'll handle it as a real pseudo-interrupt
-	 * and not a pseudo-pseudo interrupt.  The important thing
-	 * is to do the last check for queued message *after* the
-	 * re-enabling of interrupts.
-	 */
-	while (IPIQ[cpu].head != NULL) {
-		struct smtc_ipi_q *q = &IPIQ[cpu];
-		struct smtc_ipi *pipi;
-		unsigned long flags;
-
-		/*
-		 * It's just possible we'll come in with interrupts
-		 * already enabled.
-		 */
-		local_irq_save(flags);
-
-		spin_lock(&q->lock);
-		pipi = __smtc_ipi_dq(q);
-		spin_unlock(&q->lock);
-		/*
-		 ** But use a raw restore here to avoid recursion.
-		 */
-		__arch_local_irq_restore(flags);
-
-		if (pipi) {
-			self_ipi(pipi);
-			smtc_cpu_stats[cpu].selfipis++;
-		}
-	}
-}
-
-EXPORT_SYMBOL(smtc_ipi_replay);
-
-void smtc_idle_loop_hook(void)
-{
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
-	int im;
-	int flags;
-	int mtflags;
-	int bit;
-	int vpe;
-	int tc;
-	int hook_ntcs;
-	/*
-	 * printk within DMT-protected regions can deadlock,
-	 * so buffer diagnostic messages for later output.
-	 */
-	char *pdb_msg;
-	char id_ho_db_msg[768]; /* worst-case use should be less than 700 */
-
-	if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */
-		if (atomic_add_return(1, &idle_hook_initialized) == 1) {
-			int mvpconf0;
-			/* Tedious stuff to just do once */
-			mvpconf0 = read_c0_mvpconf0();
-			hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
-			if (hook_ntcs > NR_CPUS)
-				hook_ntcs = NR_CPUS;
-			for (tc = 0; tc < hook_ntcs; tc++) {
-				tcnoprog[tc] = 0;
-				clock_hang_reported[tc] = 0;
-			}
-			for (vpe = 0; vpe < 2; vpe++)
-				for (im = 0; im < 8; im++)
-					imstuckcount[vpe][im] = 0;
-			printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs);
-			atomic_set(&idle_hook_initialized, 1000);
-		} else {
-			/* Someone else is initializing in parallel - let 'em finish */
-			while (atomic_read(&idle_hook_initialized) < 1000)
-				;
-		}
-	}
-
-	/* Have we stupidly left IXMT set somewhere? */
-	if (read_c0_tcstatus() & 0x400) {
-		write_c0_tcstatus(read_c0_tcstatus() & ~0x400);
-		ehb();
-		printk("Dangling IXMT in cpu_idle()\n");
-	}
-
-	/* Have we stupidly left an IM bit turned off? */
-#define IM_LIMIT 2000
-	local_irq_save(flags);
-	mtflags = dmt();
-	pdb_msg = &id_ho_db_msg[0];
-	im = read_c0_status();
-	vpe = current_cpu_data.vpe_id;
-	for (bit = 0; bit < 8; bit++) {
-		/*
-		 * In current prototype, I/O interrupts
-		 * are masked for VPE > 0
-		 */
-		if (vpemask[vpe][bit]) {
-			if (!(im & (0x100 << bit)))
-				imstuckcount[vpe][bit]++;
-			else
-				imstuckcount[vpe][bit] = 0;
-			if (imstuckcount[vpe][bit] > IM_LIMIT) {
-				set_c0_status(0x100 << bit);
-				ehb();
-				imstuckcount[vpe][bit] = 0;
-				pdb_msg += sprintf(pdb_msg,
-					"Dangling IM %d fixed for VPE %d\n", bit,
-					vpe);
-			}
-		}
-	}
-
-	emt(mtflags);
-	local_irq_restore(flags);
-	if (pdb_msg != &id_ho_db_msg[0])
-		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
-#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-
-	smtc_ipi_replay();
-}
-
-void smtc_soft_dump(void)
-{
-	int i;
-
-	printk("Counter Interrupts taken per CPU (TC)\n");
-	for (i=0; i < NR_CPUS; i++) {
-		printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints);
-	}
-	printk("Self-IPI invocations:\n");
-	for (i=0; i < NR_CPUS; i++) {
-		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
-	}
-	smtc_ipi_qdump();
-	printk("%d Recoveries of \"stolen\" FPU\n",
-	       atomic_read(&smtc_fpu_recoveries));
-}
-
-
-/*
- * TLB management routines special to SMTC
- */
-
-void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
-{
-	unsigned long flags, mtflags, tcstat, prevhalt, asid;
-	int tlb, i;
-
-	/*
-	 * It would be nice to be able to use a spinlock here,
-	 * but this is invoked from within TLB flush routines
-	 * that protect themselves with DVPE, so if a lock is
-	 * held by another TC, it'll never be freed.
-	 *
-	 * DVPE/DMT must not be done with interrupts enabled,
-	 * so even so most callers will already have disabled
-	 * them, let's be really careful...
-	 */
-
-	local_irq_save(flags);
-	if (smtc_status & SMTC_TLB_SHARED) {
-		mtflags = dvpe();
-		tlb = 0;
-	} else {
-		mtflags = dmt();
-		tlb = cpu_data[cpu].vpe_id;
-	}
-	asid = asid_cache(cpu);
-
-	do {
-		if (!((asid += ASID_INC) & ASID_MASK) ) {
-			if (cpu_has_vtag_icache)
-				flush_icache_all();
-			/* Traverse all online CPUs (hack requires contiguous range) */
-			for_each_online_cpu(i) {
-				/*
-				 * We don't need to worry about our own CPU, nor those of
-				 * CPUs who don't share our TLB.
-				 */
-				if ((i != smp_processor_id()) &&
-				    ((smtc_status & SMTC_TLB_SHARED) ||
-				     (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) {
-					settc(cpu_data[i].tc_id);
-					prevhalt = read_tc_c0_tchalt() & TCHALT_H;
-					if (!prevhalt) {
-						write_tc_c0_tchalt(TCHALT_H);
-						mips_ihb();
-					}
-					tcstat = read_tc_c0_tcstatus();
-					smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i);
-					if (!prevhalt)
-						write_tc_c0_tchalt(0);
-				}
-			}
-			if (!asid)		/* fix version if needed */
-				asid = ASID_FIRST_VERSION;
-			local_flush_tlb_all();	/* start new asid cycle */
-		}
-	} while (smtc_live_asid[tlb][(asid & ASID_MASK)]);
-
-	/*
-	 * SMTC shares the TLB within VPEs and possibly across all VPEs.
-	 */
-	for_each_online_cpu(i) {
-		if ((smtc_status & SMTC_TLB_SHARED) ||
-		    (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
-			cpu_context(i, mm) = asid_cache(i) = asid;
-	}
-
-	if (smtc_status & SMTC_TLB_SHARED)
-		evpe(mtflags);
-	else
-		emt(mtflags);
-	local_irq_restore(flags);
-}
-
-/*
- * Invoked from macros defined in mmu_context.h
- * which must already have disabled interrupts
- * and done a DVPE or DMT as appropriate.
- */
-
-void smtc_flush_tlb_asid(unsigned long asid)
-{
-	int entry;
-	unsigned long ehi;
-
-	entry = read_c0_wired();
-
-	/* Traverse all non-wired entries */
-	while (entry < current_cpu_data.tlbsize) {
-		write_c0_index(entry);
-		ehb();
-		tlb_read();
-		ehb();
-		ehi = read_c0_entryhi();
-		if ((ehi & ASID_MASK) == asid) {
-		    /*
-		     * Invalidate only entries with specified ASID,
-		     * makiing sure all entries differ.
-		     */
-		    write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
-		    write_c0_entrylo0(0);
-		    write_c0_entrylo1(0);
-		    mtc0_tlbw_hazard();
-		    tlb_write_indexed();
-		}
-		entry++;
-	}
-	write_c0_index(PARKED_INDEX);
-	tlbw_use_hazard();
-}
-
-/*
- * Support for single-threading cache flush operations.
- */
-
-static int halt_state_save[NR_CPUS];
-
-/*
- * To really, really be sure that nothing is being done
- * by other TCs, halt them all.	 This code assumes that
- * a DVPE has already been done, so while their Halted
- * state is theoretically architecturally unstable, in
- * practice, it's not going to change while we're looking
- * at it.
- */
-
-void smtc_cflush_lockdown(void)
-{
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (cpu != smp_processor_id()) {
-			settc(cpu_data[cpu].tc_id);
-			halt_state_save[cpu] = read_tc_c0_tchalt();
-			write_tc_c0_tchalt(TCHALT_H);
-		}
-	}
-	mips_ihb();
-}
-
-/* It would be cheating to change the cpu_online states during a flush! */
-
-void smtc_cflush_release(void)
-{
-	int cpu;
-
-	/*
-	 * Start with a hazard barrier to ensure
-	 * that all CACHE ops have played through.
-	 */
-	mips_ihb();
-
-	for_each_online_cpu(cpu) {
-		if (cpu != smp_processor_id()) {
-			settc(cpu_data[cpu].tc_id);
-			write_tc_c0_tchalt(halt_state_save[cpu]);
-		}
-	}
-	mips_ihb();
-}

arch/mips/kernel/sync-r4k.c

@@ -6,8 +6,6 @@
  * not have done anything significant (but they may have had interrupts
  * enabled briefly - prom_smp_finish() should not be responsible for enabling
  * interrupts...)
- *
- * FIXME: broken for SMTC
  */
 
 #include <linux/kernel.h>
@@ -33,14 +31,6 @@ void synchronise_count_master(int cpu)
 	unsigned long flags;
 	unsigned int initcount;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC needs to synchronise per VPE, not per CPU
-	 * ignore for now
-	 */
-	return;
-#endif
-
 	printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
 
 	local_irq_save(flags);
@@ -110,14 +100,6 @@ void synchronise_count_slave(int cpu)
 	int i;
 	unsigned int initcount;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC needs to synchronise per VPE, not per CPU
-	 * ignore for now
-	 */
-	return;
-#endif
-
 	/*
 	 * Not every cpu is online at the time this gets called,
 	 * so we first wait for the master to say everyone is ready

arch/mips/kernel/time.c

@@ -26,7 +26,6 @@
 #include <asm/cpu-features.h>
 #include <asm/cpu-type.h>
 #include <asm/div64.h>
-#include <asm/smtc_ipi.h>
 #include <asm/time.h>
 
 /*

arch/mips/kernel/traps.c

@@ -370,9 +370,6 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 {
 	static int die_counter;
 	int sig = SIGSEGV;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long dvpret;
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 	oops_enter();
 
@@ -382,13 +379,7 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 
 	console_verbose();
 	raw_spin_lock_irq(&die_lock);
-#ifdef CONFIG_MIPS_MT_SMTC
-	dvpret = dvpe();
-#endif /* CONFIG_MIPS_MT_SMTC */
 	bust_spinlocks(1);
-#ifdef CONFIG_MIPS_MT_SMTC
-	mips_mt_regdump(dvpret);
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
@@ -1759,19 +1750,6 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		extern char rollback_except_vec_vi;
 		char *vec_start = using_rollback_handler() ?
 			&rollback_except_vec_vi : &except_vec_vi;
-#ifdef CONFIG_MIPS_MT_SMTC
-		/*
-		 * We need to provide the SMTC vectored interrupt handler
-		 * not only with the address of the handler, but with the
-		 * Status.IM bit to be masked before going there.
-		 */
-		extern char except_vec_vi_mori;
-#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
-		const int mori_offset = &except_vec_vi_mori - vec_start + 2;
-#else
-		const int mori_offset = &except_vec_vi_mori - vec_start;
-#endif
-#endif /* CONFIG_MIPS_MT_SMTC */
 #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
 		const int lui_offset = &except_vec_vi_lui - vec_start + 2;
 		const int ori_offset = &except_vec_vi_ori - vec_start + 2;
@@ -1795,12 +1773,6 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 #else
 				handler_len);
 #endif
-#ifdef CONFIG_MIPS_MT_SMTC
-		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */
-
-		h = (u16 *)(b + mori_offset);
-		*h = (0x100 << n);
-#endif /* CONFIG_MIPS_MT_SMTC */
 		h = (u16 *)(b + lui_offset);
 		*h = (handler >> 16) & 0xffff;
 		h = (u16 *)(b + ori_offset);
@@ -1870,20 +1842,6 @@ void per_cpu_trap_init(bool is_boot_cpu)
 	unsigned int cpu = smp_processor_id();
 	unsigned int status_set = ST0_CU0;
 	unsigned int hwrena = cpu_hwrena_impl_bits;
-#ifdef CONFIG_MIPS_MT_SMTC
-	int secondaryTC = 0;
-	int bootTC = (cpu == 0);
-
-	/*
-	 * Only do per_cpu_trap_init() for first TC of Each VPE.
-	 * Note that this hack assumes that the SMTC init code
-	 * assigns TCs consecutively and in ascending order.
-	 */
-
-	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
-	    ((read_c0_tcbind() & TCBIND_CURVPE) == cpu_data[cpu - 1].vpe_id))
-		secondaryTC = 1;
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 	/*
 	 * Disable coprocessors and select 32-bit or 64-bit addressing
@@ -1911,10 +1869,6 @@ void per_cpu_trap_init(bool is_boot_cpu)
 	if (hwrena)
 		write_c0_hwrena(hwrena);
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	if (!secondaryTC) {
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 	if (cpu_has_veic || cpu_has_vint) {
 		unsigned long sr = set_c0_status(ST0_BEV);
 		write_c0_ebase(ebase);
@@ -1949,10 +1903,6 @@ void per_cpu_trap_init(bool is_boot_cpu)
 		cp0_perfcount_irq = -1;
 	}
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	}
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 	if (!cpu_data[cpu].asid_cache)
 		cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 
@@ -1961,23 +1911,10 @@ void per_cpu_trap_init(bool is_boot_cpu)
 	BUG_ON(current->mm);
 	enter_lazy_tlb(&init_mm, current);
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	if (bootTC) {
-#endif /* CONFIG_MIPS_MT_SMTC */
 		/* Boot CPU's cache setup in setup_arch(). */
 		if (!is_boot_cpu)
 			cpu_cache_init();
 		tlb_init();
-#ifdef CONFIG_MIPS_MT_SMTC
-	} else if (!secondaryTC) {
-		/*
-		 * First TC in non-boot VPE must do subset of tlb_init()
-		 * for MMU countrol registers.
-		 */
-		write_c0_pagemask(PM_DEFAULT_MASK);
-		write_c0_wired(0);
-	}
-#endif /* CONFIG_MIPS_MT_SMTC */
 	TLBMISS_HANDLER_SETUP();
 }
 

arch/mips/kernel/vpe-mt.c

@@ -127,9 +127,8 @@ int vpe_run(struct vpe *v)
 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
 
 	/*
-	 * SMTC/SMVP kernels manage VPE enable independently,
-	 * but uniprocessor kernels need to turn it on, even
-	 * if that wasn't the pre-dvpe() state.
+	 * SMVP kernels manage VPE enable independently, but uniprocessor
+	 * kernels need to turn it on, even if that wasn't the pre-dvpe() state.
 	 */
 #ifdef CONFIG_SMP
 	evpe(vpeflags);
@@ -454,12 +453,11 @@ int __init vpe_module_init(void)
 
 			settc(tc);
 
-			/* Any TC that is bound to VPE0 gets left as is - in
-			 * case we are running SMTC on VPE0. A TC that is bound
-			 * to any other VPE gets bound to VPE0, ideally I'd like
-			 * to make it homeless but it doesn't appear to let me
-			 * bind a TC to a non-existent VPE. Which is perfectly
-			 * reasonable.
+			/*
+			 * A TC that is bound to any other VPE gets bound to
+			 * VPE0, ideally I'd like to make it homeless but it
+			 * doesn't appear to let me bind a TC to a non-existent
+			 * VPE. Which is perfectly reasonable.
 			 *
 			 * The (un)bound state is visible to an EJTAG probe so
 			 * may notify GDB...

arch/mips/lantiq/irq.c

@@ -61,7 +61,7 @@
 /* we have a cascade of 8 irqs */
 #define MIPS_CPU_IRQ_CASCADE		8
 
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 int gic_present;
 #endif
 
@@ -440,7 +440,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ, &irq_call);
 #endif
 
-#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+#ifndef CONFIG_MIPS_MT_SMP
 	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
 		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
 #else

arch/mips/lib/mips-atomic.c

@@ -15,7 +15,7 @@
 #include <linux/export.h>
 #include <linux/stringify.h>
 
-#if !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC)
+#ifndef CONFIG_CPU_MIPSR2
 
 /*
  * For cli() we have to insert nops to make sure that the new value
@@ -42,12 +42,7 @@ notrace void arch_local_irq_disable(void)
 	__asm__ __volatile__(
 	"	.set	push						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1					\n"
-	"	ori	$1, 0x400					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
+#if   defined(CONFIG_CPU_MIPSR2)
 	/* see irqflags.h for inline function */
 #else
 	"	mfc0	$1,$12						\n"
@@ -77,13 +72,7 @@ notrace unsigned long arch_local_irq_save(void)
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	%[flags], $2, 1				\n"
-	"	ori	$1, %[flags], 0x400				\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-	"	andi	%[flags], %[flags], 0x400			\n"
-#elif defined(CONFIG_CPU_MIPSR2)
+#if   defined(CONFIG_CPU_MIPSR2)
 	/* see irqflags.h for inline function */
 #else
 	"	mfc0	%[flags], $12					\n"
@@ -108,29 +97,13 @@ notrace void arch_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of branch and call overhead on each
-	 * local_irq_restore()
-	 */
-	if (unlikely(!(flags & 0x0400)))
-		smtc_ipi_replay();
-#endif
 	preempt_disable();
 
 	__asm__ __volatile__(
 	"	.set	push						\n"
 	"	.set	noreorder					\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1					\n"
-	"	andi	%[flags], 0x400					\n"
-	"	ori	$1, 0x400					\n"
-	"	xori	$1, 0x400					\n"
-	"	or	%[flags], $1					\n"
-	"	mtc0	%[flags], $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+#if   defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
 	/* see irqflags.h for inline function */
 #elif defined(CONFIG_CPU_MIPSR2)
 	/* see irqflags.h for inline function */
@@ -163,14 +136,7 @@ notrace void __arch_local_irq_restore(unsigned long flags)
 	"	.set	push						\n"
 	"	.set	noreorder					\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1					\n"
-	"	andi	%[flags], 0x400					\n"
-	"	ori	$1, 0x400					\n"
-	"	xori	$1, 0x400					\n"
-	"	or	%[flags], $1					\n"
-	"	mtc0	%[flags], $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+#if   defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
 	/* see irqflags.h for inline function */
 #elif defined(CONFIG_CPU_MIPSR2)
 	/* see irqflags.h for inline function */
@@ -192,4 +158,4 @@ notrace void __arch_local_irq_restore(unsigned long flags)
 }
 EXPORT_SYMBOL(__arch_local_irq_restore);
 
-#endif /* !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) */
+#endif /* !CONFIG_CPU_MIPSR2 */

arch/mips/mm/c-r4k.c

@@ -50,7 +50,7 @@ static inline void r4k_on_each_cpu(void (*func) (void *info), void *info)
 {
 	preempt_disable();
 
-#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+#ifndef CONFIG_MIPS_MT_SMP
 	smp_call_function(func, info, 1);
 #endif
 	func(info);
@@ -427,7 +427,7 @@ static void r4k___flush_cache_all(void)
 
 static inline int has_valid_asid(const struct mm_struct *mm)
 {
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 	int i;
 
 	for_each_online_cpu(i)

arch/mips/mm/init.c

@@ -44,27 +44,6 @@
 #include <asm/tlb.h>
 #include <asm/fixmap.h>
 
-/* Atomicity and interruptability */
-#ifdef CONFIG_MIPS_MT_SMTC
-
-#include <asm/mipsmtregs.h>
-
-#define ENTER_CRITICAL(flags) \
-	{ \
-	unsigned int mvpflags; \
-	local_irq_save(flags);\
-	mvpflags = dvpe()
-#define EXIT_CRITICAL(flags) \
-	evpe(mvpflags); \
-	local_irq_restore(flags); \
-	}
-#else
-
-#define ENTER_CRITICAL(flags) local_irq_save(flags)
-#define EXIT_CRITICAL(flags) local_irq_restore(flags)
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 /*
  * We have up to 8 empty zeroed pages so we can map one of the right colour
  * when needed.	 This is necessary only on R4000 / R4400 SC and MC versions
@@ -100,20 +79,6 @@ void setup_zero_pages(void)
 	zero_page_mask = ((PAGE_SIZE << order) - 1) & PAGE_MASK;
 }
 
-#ifdef CONFIG_MIPS_MT_SMTC
-static pte_t *kmap_coherent_pte;
-static void __init kmap_coherent_init(void)
-{
-	unsigned long vaddr;
-
-	/* cache the first coherent kmap pte */
-	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
-	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
-}
-#else
-static inline void kmap_coherent_init(void) {}
-#endif
-
 void *kmap_coherent(struct page *page, unsigned long addr)
 {
 	enum fixed_addresses idx;
@@ -126,12 +91,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 
 	pagefault_disable();
 	idx = (addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1);
-#ifdef CONFIG_MIPS_MT_SMTC
-	idx += FIX_N_COLOURS * smp_processor_id() +
-		(in_interrupt() ? (FIX_N_COLOURS * NR_CPUS) : 0);
-#else
 	idx += in_interrupt() ? FIX_N_COLOURS : 0;
-#endif
 	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
 	pte = mk_pte(page, PAGE_KERNEL);
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
@@ -140,44 +100,29 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 	entrylo = pte_to_entrylo(pte_val(pte));
 #endif
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 	old_ctx = read_c0_entryhi();
 	write_c0_entryhi(vaddr & (PAGE_MASK << 1));
 	write_c0_entrylo0(entrylo);
 	write_c0_entrylo1(entrylo);
-#ifdef CONFIG_MIPS_MT_SMTC
-	set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte);
-	/* preload TLB instead of local_flush_tlb_one() */
-	mtc0_tlbw_hazard();
-	tlb_probe();
-	tlb_probe_hazard();
-	tlbidx = read_c0_index();
-	mtc0_tlbw_hazard();
-	if (tlbidx < 0)
-		tlb_write_random();
-	else
-		tlb_write_indexed();
-#else
 	tlbidx = read_c0_wired();
 	write_c0_wired(tlbidx + 1);
 	write_c0_index(tlbidx);
 	mtc0_tlbw_hazard();
 	tlb_write_indexed();
-#endif
 	tlbw_use_hazard();
 	write_c0_entryhi(old_ctx);
-	EXIT_CRITICAL(flags);
+	local_irq_restore(flags);
 
 	return (void*) vaddr;
 }
 
 void kunmap_coherent(void)
 {
-#ifndef CONFIG_MIPS_MT_SMTC
 	unsigned int wired;
 	unsigned long flags, old_ctx;
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 	old_ctx = read_c0_entryhi();
 	wired = read_c0_wired() - 1;
 	write_c0_wired(wired);
@@ -189,8 +134,7 @@ void kunmap_coherent(void)
 	tlb_write_indexed();
 	tlbw_use_hazard();
 	write_c0_entryhi(old_ctx);
-	EXIT_CRITICAL(flags);
-#endif
+	local_irq_restore(flags);
 	pagefault_enable();
 }
 
@@ -256,7 +200,7 @@ EXPORT_SYMBOL_GPL(copy_from_user_page);
 void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
 {
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_HIGHMEM
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
@@ -327,8 +271,6 @@ void __init paging_init(void)
 #ifdef CONFIG_HIGHMEM
 	kmap_init();
 #endif
-	kmap_coherent_init();
-
 #ifdef CONFIG_ZONE_DMA
 	max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
 #endif

arch/mips/mm/tlb-r4k.c

@@ -25,28 +25,6 @@
 
 extern void build_tlb_refill_handler(void);
 
-/* Atomicity and interruptability */
-#ifdef CONFIG_MIPS_MT_SMTC
-
-#include <asm/smtc.h>
-#include <asm/mipsmtregs.h>
-
-#define ENTER_CRITICAL(flags) \
-	{ \
-	unsigned int mvpflags; \
-	local_irq_save(flags);\
-	mvpflags = dvpe()
-#define EXIT_CRITICAL(flags) \
-	evpe(mvpflags); \
-	local_irq_restore(flags); \
-	}
-#else
-
-#define ENTER_CRITICAL(flags) local_irq_save(flags)
-#define EXIT_CRITICAL(flags) local_irq_restore(flags)
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
 /*
  * LOONGSON2/3 has a 4 entry itlb which is a subset of dtlb,
  * unfortunately, itlb is not totally transparent to software.
@@ -75,7 +53,7 @@ void local_flush_tlb_all(void)
 	unsigned long old_ctx;
 	int entry, ftlbhighset;
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 	/* Save old context and create impossible VPN2 value */
 	old_ctx = read_c0_entryhi();
 	write_c0_entrylo0(0);
@@ -112,7 +90,7 @@ void local_flush_tlb_all(void)
 	tlbw_use_hazard();
 	write_c0_entryhi(old_ctx);
 	flush_itlb();
-	EXIT_CRITICAL(flags);
+	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(local_flush_tlb_all);
 
@@ -142,7 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	if (cpu_context(cpu, mm) != 0) {
 		unsigned long size, flags;
 
-		ENTER_CRITICAL(flags);
+		local_irq_save(flags);
 		start = round_down(start, PAGE_SIZE << 1);
 		end = round_up(end, PAGE_SIZE << 1);
 		size = (end - start) >> (PAGE_SHIFT + 1);
@@ -176,7 +154,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			drop_mmu_context(mm, cpu);
 		}
 		flush_itlb();
-		EXIT_CRITICAL(flags);
+		local_irq_restore(flags);
 	}
 }
 
@@ -184,7 +162,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
 	unsigned long size, flags;
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	size = (size + 1) >> 1;
 	if (size <= (current_cpu_data.tlbsizeftlbsets ?
@@ -220,7 +198,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		local_flush_tlb_all();
 	}
 	flush_itlb();
-	EXIT_CRITICAL(flags);
+	local_irq_restore(flags);
 }
 
 void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
@@ -233,7 +211,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 
 		newpid = cpu_asid(cpu, vma->vm_mm);
 		page &= (PAGE_MASK << 1);
-		ENTER_CRITICAL(flags);
+		local_irq_save(flags);
 		oldpid = read_c0_entryhi();
 		write_c0_entryhi(page | newpid);
 		mtc0_tlbw_hazard();
@@ -253,7 +231,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 	finish:
 		write_c0_entryhi(oldpid);
 		flush_itlb_vm(vma);
-		EXIT_CRITICAL(flags);
+		local_irq_restore(flags);
 	}
 }
 
@@ -266,7 +244,7 @@ void local_flush_tlb_one(unsigned long page)
 	unsigned long flags;
 	int oldpid, idx;
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 	oldpid = read_c0_entryhi();
 	page &= (PAGE_MASK << 1);
 	write_c0_entryhi(page);
@@ -285,7 +263,7 @@ void local_flush_tlb_one(unsigned long page)
 	}
 	write_c0_entryhi(oldpid);
 	flush_itlb();
-	EXIT_CRITICAL(flags);
+	local_irq_restore(flags);
 }
 
 /*
@@ -308,7 +286,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	if (current->active_mm != vma->vm_mm)
 		return;
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 
 	pid = read_c0_entryhi() & ASID_MASK;
 	address &= (PAGE_MASK << 1);
@@ -358,7 +336,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	}
 	tlbw_use_hazard();
 	flush_itlb_vm(vma);
-	EXIT_CRITICAL(flags);
+	local_irq_restore(flags);
 }
 
 void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
@@ -369,7 +347,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 	unsigned long old_pagemask;
 	unsigned long old_ctx;
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 	/* Save old context and create impossible VPN2 value */
 	old_ctx = read_c0_entryhi();
 	old_pagemask = read_c0_pagemask();
@@ -389,7 +367,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 	tlbw_use_hazard();	/* What is the hazard here? */
 	write_c0_pagemask(old_pagemask);
 	local_flush_tlb_all();
-	EXIT_CRITICAL(flags);
+	local_irq_restore(flags);
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -399,13 +377,13 @@ int __init has_transparent_hugepage(void)
 	unsigned int mask;
 	unsigned long flags;
 
-	ENTER_CRITICAL(flags);
+	local_irq_save(flags);
 	write_c0_pagemask(PM_HUGE_MASK);
 	back_to_back_c0_hazard();
 	mask = read_c0_pagemask();
 	write_c0_pagemask(PM_DEFAULT_MASK);
 
-	EXIT_CRITICAL(flags);
+	local_irq_restore(flags);
 
 	return mask == PM_HUGE_MASK;
 }

arch/mips/mti-malta/Makefile

@@ -8,6 +8,3 @@
 obj-y				:= malta-amon.o malta-display.o malta-init.o \
 				   malta-int.o malta-memory.o malta-platform.o \
 				   malta-reset.o malta-setup.o malta-time.o
-
-# FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC)	+= malta-smtc.o

arch/mips/mti-malta/malta-init.c

@@ -116,8 +116,6 @@ phys_t mips_cpc_default_phys_base(void)
 	return CPC_BASE_ADDR;
 }
 
-extern struct plat_smp_ops msmtc_smp_ops;
-
 void __init prom_init(void)
 {
 	mips_display_message("LINUX");
@@ -304,8 +302,4 @@ mips_pci_controller:
 		return;
 	if (!register_vsmp_smp_ops())
 		return;
-
-#ifdef CONFIG_MIPS_MT_SMTC
-	register_smp_ops(&msmtc_smp_ops);
-#endif
 }

arch/mips/mti-malta/malta-int.c

@@ -504,28 +504,9 @@ void __init arch_init_irq(void)
 	} else if (cpu_has_vint) {
 		set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
 		set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
-#ifdef CONFIG_MIPS_MT_SMTC
-		setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq,
-			(0x100 << MIPSCPU_INT_I8259A));
-		setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
-			&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
-		/*
-		 * Temporary hack to ensure that the subsidiary device
-		 * interrupts coing in via the i8259A, but associated
-		 * with low IRQ numbers, will restore the Status.IM
-		 * value associated with the i8259A.
-		 */
-		{
-			int i;
-
-			for (i = 0; i < 16; i++)
-				irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A);
-		}
-#else /* Not SMTC */
 		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
 		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
 						&corehi_irqaction);
-#endif /* CONFIG_MIPS_MT_SMTC */
 	} else {
 		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
 		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,

arch/mips/mti-malta/malta-setup.c

@@ -77,11 +77,7 @@ const char *get_system_type(void)
 	return "MIPS Malta";
 }
 
-#if defined(CONFIG_MIPS_MT_SMTC)
-const char display_string[] = "	      SMTC LINUX ON MALTA	";
-#else
 const char display_string[] = "	       LINUX ON MALTA	    ";
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 #ifdef CONFIG_BLK_DEV_FD
 static void __init fd_activate(void)

arch/mips/mti-malta/malta-smtc.c

@@ -1,162 +0,0 @@
-/*
- * Malta Platform-specific hooks for SMP operation
- */
-#include <linux/irq.h>
-#include <linux/init.h>
-
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
-
-/* VPE/SMP Prototype implements platform interfaces directly */
-
-/*
- * Cause the specified action to be performed on a targeted "CPU"
- */
-
-static void msmtc_send_ipi_single(int cpu, unsigned int action)
-{
-	/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
-	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
-}
-
-static void msmtc_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
-	unsigned int i;
-
-	for_each_cpu(i, mask)
-		msmtc_send_ipi_single(i, action);
-}
-
-/*
- * Post-config but pre-boot cleanup entry point
- */
-static void msmtc_init_secondary(void)
-{
-	int myvpe;
-
-	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
-	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
-	if (myvpe != 0) {
-		/* Ideally, this should be done only once per VPE, but... */
-		clear_c0_status(ST0_IM);
-		set_c0_status((0x100 << cp0_compare_irq)
-				| (0x100 << MIPS_CPU_IPI_IRQ));
-		if (cp0_perfcount_irq >= 0)
-			set_c0_status(0x100 << cp0_perfcount_irq);
-	}
-
-	smtc_init_secondary();
-}
-
-/*
- * Platform "CPU" startup hook
- */
-static void msmtc_boot_secondary(int cpu, struct task_struct *idle)
-{
-	smtc_boot_secondary(cpu, idle);
-}
-
-/*
- * SMP initialization finalization entry point
- */
-static void msmtc_smp_finish(void)
-{
-	smtc_smp_finish();
-}
-
-/*
- * Hook for after all CPUs are online
- */
-
-static void msmtc_cpus_done(void)
-{
-}
-
-/*
- * Platform SMP pre-initialization
- *
- * As noted above, we can assume a single CPU for now
- * but it may be multithreaded.
- */
-
-static void __init msmtc_smp_setup(void)
-{
-	/*
-	 * we won't get the definitive value until
-	 * we've run smtc_prepare_cpus later, but
-	 * we would appear to need an upper bound now.
-	 */
-	smp_num_siblings = smtc_build_cpu_map(0);
-}
-
-static void __init msmtc_prepare_cpus(unsigned int max_cpus)
-{
-	smtc_prepare_cpus(max_cpus);
-}
-
-struct plat_smp_ops msmtc_smp_ops = {
-	.send_ipi_single	= msmtc_send_ipi_single,
-	.send_ipi_mask		= msmtc_send_ipi_mask,
-	.init_secondary		= msmtc_init_secondary,
-	.smp_finish		= msmtc_smp_finish,
-	.cpus_done		= msmtc_cpus_done,
-	.boot_secondary		= msmtc_boot_secondary,
-	.smp_setup		= msmtc_smp_setup,
-	.prepare_cpus		= msmtc_prepare_cpus,
-};
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-/*
- * IRQ affinity hook
- */
-
-
-int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
-			  bool force)
-{
-	cpumask_t tmask;
-	int cpu = 0;
-	void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff);
-
-	/*
-	 * On the legacy Malta development board, all I/O interrupts
-	 * are routed through the 8259 and combined in a single signal
-	 * to the CPU daughterboard, and on the CoreFPGA2/3 34K models,
-	 * that signal is brought to IP2 of both VPEs. To avoid racing
-	 * concurrent interrupt service events, IP2 is enabled only on
-	 * one VPE, by convention VPE0.	 So long as no bits are ever
-	 * cleared in the affinity mask, there will never be any
-	 * interrupt forwarding.  But as soon as a program or operator
-	 * sets affinity for one of the related IRQs, we need to make
-	 * sure that we don't ever try to forward across the VPE boundary,
-	 * at least not until we engineer a system where the interrupt
-	 * _ack() or _end() function can somehow know that it corresponds
-	 * to an interrupt taken on another VPE, and perform the appropriate
-	 * restoration of Status.IM state using MFTR/MTTR instead of the
-	 * normal local behavior. We also ensure that no attempt will
-	 * be made to forward to an offline "CPU".
-	 */
-
-	cpumask_copy(&tmask, affinity);
-	for_each_cpu(cpu, affinity) {
-		if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu))
-			cpu_clear(cpu, tmask);
-	}
-	cpumask_copy(d->affinity, &tmask);
-
-	if (cpus_empty(tmask))
-		/*
-		 * We could restore a default mask here, but the
-		 * runtime code can anyway deal with the null set
-		 */
-		printk(KERN_WARNING
-		       "IRQ affinity leaves no legal CPU for IRQ %d\n", d->irq);
-
-	/* Do any generic SMTC IRQ affinity setup */
-	smtc_set_irq_affinity(d->irq, tmask);
-
-	return IRQ_SET_MASK_OK_NOCOPY;
-}
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */

arch/mips/pmcs-msp71xx/Makefile

@@ -10,4 +10,3 @@ obj-$(CONFIG_PCI) += msp_pci.o
 obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
 obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
 obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
-obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o

arch/mips/pmcs-msp71xx/msp_irq.c

@@ -32,7 +32,7 @@ extern void msp_vsmp_int_init(void);
 
 /* vectored interrupt implementation */
 
-/* SW0/1 interrupts are used for SMP/SMTC */
+/* SW0/1 interrupts are used for SMP  */
 static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); }
 static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); }
 static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); }
@@ -138,14 +138,6 @@ void __init arch_init_irq(void)
 	set_vi_handler(MSP_INT_SEC, sec_int_dispatch);
 #ifdef CONFIG_MIPS_MT_SMP
 	msp_vsmp_int_init();
-#elif defined CONFIG_MIPS_MT_SMTC
-	/*Set hwmask for all platform devices */
-	irq_hwmask[MSP_INT_MAC0] = C_IRQ0;
-	irq_hwmask[MSP_INT_MAC1] = C_IRQ1;
-	irq_hwmask[MSP_INT_USB] = C_IRQ2;
-	irq_hwmask[MSP_INT_SAR] = C_IRQ3;
-	irq_hwmask[MSP_INT_SEC] = C_IRQ5;
-
 #endif	/* CONFIG_MIPS_MT_SMP */
 #endif	/* CONFIG_MIPS_MT */
 	/* setup the cascaded interrupts */
@@ -153,8 +145,10 @@ void __init arch_init_irq(void)
 	setup_irq(MSP_INT_PER, &per_cascade_msp);
 
 #else
-	/* setup the 2nd-level SLP register based interrupt controller */
-	/* VSMP /SMTC support support is not enabled for SLP */
+	/*
+	 * Setup the 2nd-level SLP register based interrupt controller.
+	 * VSMP support support is not enabled for SLP.
+	 */
 	msp_slp_irq_init();
 
 	/* setup the cascaded SLP/PER interrupts */

arch/mips/pmcs-msp71xx/msp_irq_cic.c

@@ -120,10 +120,9 @@ static void msp_cic_irq_ack(struct irq_data *d)
 	* hurt for the others
 	*/
 	*CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE));
-	smtc_im_ack_irq(d->irq);
 }
 
-/*Note: Limiting to VSMP . Not tested in SMTC */
+/* Note: Limiting to VSMP.  */
 
 #ifdef CONFIG_MIPS_MT_SMP
 static int msp_cic_irq_set_affinity(struct irq_data *d,
@@ -183,10 +182,6 @@ void __init msp_cic_irq_init(void)
 	for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) {
 		irq_set_chip_and_handler(i, &msp_cic_irq_controller,
 					 handle_level_irq);
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* Mask of CIC interrupt */
-		irq_hwmask[i] = C_IRQ4;
-#endif
 	}
 
 	/* Initialize the PER interrupt sub-system */

arch/mips/pmcs-msp71xx/msp_irq_per.c

@@ -113,9 +113,6 @@ void __init msp_per_irq_init(void)
 	/* initialize all the IRQ descriptors */
 	for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
 		irq_set_chip(i, &msp_per_irq_controller);
-#ifdef CONFIG_MIPS_MT_SMTC
-		irq_hwmask[i] = C_IRQ4;
-#endif
 	}
 }
 

arch/mips/pmcs-msp71xx/msp_setup.c

@@ -147,8 +147,6 @@ void __init plat_mem_setup(void)
 	pm_power_off = msp_power_off;
 }
 
-extern struct plat_smp_ops msp_smtc_smp_ops;
-
 void __init prom_init(void)
 {
 	unsigned long family;
@@ -229,9 +227,5 @@ void __init prom_init(void)
 	 */
 	msp_serial_setup();
 
-	if (register_vsmp_smp_ops()) {
-#ifdef CONFIG_MIPS_MT_SMTC
-		register_smp_ops(&msp_smtc_smp_ops);
-#endif
-	}
+	register_vsmp_smp_ops();
 }

arch/mips/pmcs-msp71xx/msp_smtc.c

@@ -1,104 +0,0 @@
-/*
- * MSP71xx Platform-specific hooks for SMP operation
- */
-#include <linux/irq.h>
-#include <linux/init.h>
-
-#include <asm/mipsmtregs.h>
-#include <asm/mipsregs.h>
-#include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
-
-/* VPE/SMP Prototype implements platform interfaces directly */
-
-/*
- * Cause the specified action to be performed on a targeted "CPU"
- */
-
-static void msp_smtc_send_ipi_single(int cpu, unsigned int action)
-{
-	/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
-	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
-}
-
-static void msp_smtc_send_ipi_mask(const struct cpumask *mask,
-						unsigned int action)
-{
-	unsigned int i;
-
-	for_each_cpu(i, mask)
-		msp_smtc_send_ipi_single(i, action);
-}
-
-/*
- * Post-config but pre-boot cleanup entry point
- */
-static void msp_smtc_init_secondary(void)
-{
-	int myvpe;
-
-	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
-	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
-	if (myvpe > 0)
-		change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
-				STATUSF_IP6 | STATUSF_IP7);
-	smtc_init_secondary();
-}
-
-/*
- * Platform "CPU" startup hook
- */
-static void msp_smtc_boot_secondary(int cpu, struct task_struct *idle)
-{
-	smtc_boot_secondary(cpu, idle);
-}
-
-/*
- * SMP initialization finalization entry point
- */
-static void msp_smtc_smp_finish(void)
-{
-	smtc_smp_finish();
-}
-
-/*
- * Hook for after all CPUs are online
- */
-
-static void msp_smtc_cpus_done(void)
-{
-}
-
-/*
- * Platform SMP pre-initialization
- *
- * As noted above, we can assume a single CPU for now
- * but it may be multithreaded.
- */
-
-static void __init msp_smtc_smp_setup(void)
-{
-	/*
-	 * we won't get the definitive value until
-	 * we've run smtc_prepare_cpus later, but
-	 */
-
-	if (read_c0_config3() & (1 << 2))
-		smp_num_siblings = smtc_build_cpu_map(0);
-}
-
-static void __init msp_smtc_prepare_cpus(unsigned int max_cpus)
-{
-	smtc_prepare_cpus(max_cpus);
-}
-
-struct plat_smp_ops msp_smtc_smp_ops = {
-	.send_ipi_single	= msp_smtc_send_ipi_single,
-	.send_ipi_mask		= msp_smtc_send_ipi_mask,
-	.init_secondary		= msp_smtc_init_secondary,
-	.smp_finish		= msp_smtc_smp_finish,
-	.cpus_done		= msp_smtc_cpus_done,
-	.boot_secondary		= msp_smtc_boot_secondary,
-	.smp_setup		= msp_smtc_smp_setup,
-	.prepare_cpus		= msp_smtc_prepare_cpus,
-};