ARM: at91: time: move the system timer driver to drivers/clocksource

Import at91rm9200_time.c from mach-at91 as timer-atmel-st.c. Further cleanup is
required to get rid of the mach-at91 headers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/mach-at91/Kconfig

@@ -77,6 +77,7 @@ if SOC_SAM_V4_V5
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select ATMEL_AIC_IRQ
+	select ATMEL_ST
 	select COMMON_CLK_AT91
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS

arch/arm/mach-at91/Makefile

@@ -7,7 +7,7 @@ obj-y		:= soc.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
 # CPU-specific support
-obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
 

drivers/clocksource/Kconfig

@@ -143,6 +143,10 @@ config ATMEL_PIT
 	select CLKSRC_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
 
+config ATMEL_ST
+	bool
+	select CLKSRC_OF
+
 config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help

drivers/clocksource/Makefile

@@ -1,5 +1,6 @@
 obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
+obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o