pwm: pxa: Add device tree support

This patch adds device tree support to the PXA's PWM driver.  Nothing
needs to be extracted from the device tree node by the PWM device.
Client devices need only specify the period; the per-chip index is
implicitly zero because one device node must be present for each PWM
output in use.  This approach is more convenient due to the wide
variability in the number of PWM channels present across the various PXA
variants, and is made possible by the fact that the register sets for
each PWM channel are segregated from each other.  An of_xlate() method
is added to parse this single-cell node.  The existing ID table is
reused for the match table data.

Tested on a Palm Treo 680 (both platform data and DT cases).

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Documentation/devicetree/bindings/pwm/pxa-pwm.txt

@@ -0,0 +1,30 @@
+Marvell PWM controller
+
+Required properties:
+- compatible: should be one or more of:
+  - "marvell,pxa250-pwm"
+  - "marvell,pxa270-pwm"
+  - "marvell,pxa168-pwm"
+  - "marvell,pxa910-pwm"
+- reg: Physical base address and length of the registers used by the PWM channel
+  Note that one device instance must be created for each PWM that is used, so the
+  length covers only the register window for one PWM output, not that of the
+  entire PWM controller.  Currently length is 0x10 for all supported devices.
+- #pwm-cells: Should be 1.  This cell is used to specify the period in
+  nanoseconds.
+
+Example PWM device node:
+
+pwm0: pwm@40b00000 {
+	compatible = "marvell,pxa250-pwm";
+	reg = <0x40b00000 0x10>;
+	#pwm-cells = <1>;
+};
+
+Example PWM client node:
+
+backlight {
+	compatible = "pwm-backlight";
+	pwms = <&pwm0 5000000>;
+	...
+}

drivers/pwm/pwm-pxa.c

@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
+#include <linux/of_device.h>
 
 #include <asm/div64.h>
 
@@ -124,6 +125,46 @@ static struct pwm_ops pxa_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
+#ifdef CONFIG_OF
+/*
+ * Device tree users must create one device instance for each pwm channel.
+ * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
+ * code that this is a single channel pxa25x-pwm.  Currently all devices are
+ * supported identically.
+ */
+static struct of_device_id pwm_of_match[] = {
+	{ .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
+	{ .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pwm_of_match);
+#else
+#define pwm_of_match NULL
+#endif
+
+static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev)
+{
+	const struct of_device_id *id = of_match_device(pwm_of_match, dev);
+
+	return id ? id->data : NULL;
+}
+
+static struct pwm_device *
+pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	pwm = pwm_request_from_chip(pc, 0, NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm_set_period(pwm, args->args[0]);
+
+	return pwm;
+}
+
 static int pwm_probe(struct platform_device *pdev)
 {
 	const struct platform_device_id *id = platform_get_device_id(pdev);
@@ -131,6 +172,12 @@ static int pwm_probe(struct platform_device *pdev)
 	struct resource *r;
 	int ret = 0;
 
+	if (IS_ENABLED(CONFIG_OF) && id == NULL)
+		id = pxa_pwm_get_id_dt(&pdev->dev);
+
+	if (id == NULL)
+		return -EINVAL;
+
 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
 	if (pwm == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -146,6 +193,11 @@ static int pwm_probe(struct platform_device *pdev)
 	pwm->chip.base = -1;
 	pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
 
+	if (IS_ENABLED(CONFIG_OF)) {
+		pwm->chip.of_xlate = pxa_pwm_of_xlate;
+		pwm->chip.of_pwm_n_cells = 1;
+	}
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(pwm->mmio_base))
@@ -176,6 +228,7 @@ static struct platform_driver pwm_driver = {
 	.driver		= {
 		.name	= "pxa25x-pwm",
 		.owner	= THIS_MODULE,
+		.of_match_table = pwm_of_match,
 	},
 	.probe		= pwm_probe,
 	.remove		= pwm_remove,