Merge branches 'timers-core-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates - and a leftover fix - from Thomas Gleixner:
 "A rather large (commit wise) update from the timer side:

   - A bulk update to make compile tests work in the clocksource drivers

   - An overhaul of the h8300 timers

   - Some more Y2038 work

   - A few overflow prevention checks in the timekeeping/ntp code

   - The usual pile of fixes and improvements to the various
     clocksource/clockevent drivers and core code"

Also:
 "A single fix for the posix-clock poll code which did not make it into
  4.4"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
  clocksource/drivers/acpi_pm: Convert to pr_* macros
  clocksource: Make clocksource validation work for all clocksources
  timekeeping: Cap adjustments so they don't exceed the maxadj value
  ntp: Fix second_overflow's input parameter type to be 64bits
  ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds
  timekeeping: Provide internal function __ktime_get_real_seconds
  clocksource/drivers/h8300: Use ioread / iowrite
  clocksource/drivers/h8300: Initializer cleanup.
  clocksource/drivers/h8300: Simplify delta handling
  clocksource/drivers/h8300: Fix timer not overflow case
  clocksource/drivers/h8300: Change to overflow interrupt
  clocksource/drivers/lpc32: Correct pr_err() output format
  clocksource/drivers/arm_global_timer: Fix suspend resume
  clocksource/drivers/pistachio: Fix wrong calculated clocksource read value
  clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set
  clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel
  clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path
  clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
  clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
  clocksource/drivers/h8300: Increase the compilation test coverage
  ...

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-clock: Fix return code on the poll method's error path

MAINTAINERS

@@ -9364,7 +9364,7 @@ M:	Andreas Noever <andreas.noever@gmail.com>
 S:	Maintained
 F:	drivers/thunderbolt/
 
-TIMEKEEPING, CLOCKSOURCE CORE, NTP
+TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
 M:	John Stultz <john.stultz@linaro.org>
 M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
@@ -9377,6 +9377,7 @@ F:	include/uapi/linux/time.h
 F:	include/uapi/linux/timex.h
 F:	kernel/time/clocksource.c
 F:	kernel/time/time*.c
+F:	kernel/time/alarmtimer.c
 F:	kernel/time/ntp.c
 F:	tools/testing/selftests/timers/
 

arch/arm/Kconfig

@@ -611,6 +611,7 @@ config ARCH_PXA
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
+	select CLKSRC_PXA
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
@@ -650,6 +651,8 @@ config ARCH_SA1100
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_PXA
+	select CLKSRC_OF if OF
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS

arch/arm/mach-exynos/Kconfig

@@ -27,6 +27,7 @@ menuconfig ARCH_EXYNOS
 	select SRAM
 	select THERMAL
 	select MFD_SYSCON
+	select CLKSRC_EXYNOS_MCT
 	help
 	  Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
 

arch/arm/mach-sti/Kconfig

@@ -3,6 +3,7 @@ menuconfig ARCH_STI
 	select ARM_GIC
 	select ST_IRQCHIP
 	select ARM_GLOBAL_TIMER
+	select CLKSRC_ST_LPC
 	select PINCTRL
 	select PINCTRL_ST
 	select MFD_SYSCON

arch/arm/mach-ux500/Kconfig

@@ -32,6 +32,7 @@ config UX500_SOC_DB8500
 	select PINCTRL_AB8540
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
+	select CLKSRC_DBX500_PRCMU
 	select PM_GENERIC_DOMAINS if PM
 
 config MACH_MOP500

arch/h8300/Kconfig

@@ -17,6 +17,7 @@ config H8300
 	select HAVE_MEMBLOCK
 	select HAVE_DMA_ATTRS
 	select CLKSRC_OF
+	select H8300_TMR8
 
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y

arch/h8300/include/asm/io.h

@@ -3,40 +3,45 @@
 
 #ifdef __KERNEL__
 
-#include <asm-generic/io.h>
-
 /* H8/300 internal I/O functions */
-static inline unsigned char ctrl_inb(unsigned long addr)
+
+#define __raw_readb __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
 {
-	return *(volatile unsigned char *)addr;
+	return *(volatile u8 *)addr;
 }
 
-static inline unsigned short ctrl_inw(unsigned long addr)
+#define __raw_readw __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
 {
-	return *(volatile unsigned short *)addr;
+	return *(volatile u16 *)addr;
 }
 
-static inline unsigned long ctrl_inl(unsigned long addr)
+#define __raw_readl __raw_readl
+static inline u32  __raw_readl(const volatile void __iomem *addr)
 {
-	return *(volatile unsigned long *)addr;
+	return *(volatile u32 *)addr;
 }
 
-static inline void ctrl_outb(unsigned char b, unsigned long addr)
+#define __raw_writeb __raw_writeb
+static inline void __raw_writeb(u8 b, const volatile void __iomem *addr)
 {
-	*(volatile unsigned char *)addr = b;
+	*(volatile u8 *)addr = b;
 }
 
-static inline void ctrl_outw(unsigned short b, unsigned long addr)
+#define __raw_writew __raw_writew
+static inline void __raw_writew(u16 b, const volatile void __iomem *addr)
 {
-	*(volatile unsigned short *)addr = b;
+	*(volatile u16 *)addr = b;
 }
 
-static inline void ctrl_outl(unsigned long b, unsigned long addr)
+#define __raw_writel __raw_writel
+static inline void __raw_writel(u32 b, const volatile void __iomem *addr)
 {
-	*(volatile unsigned long *)addr = b;
+	*(volatile u32 *)addr = b;
 }
 
-static inline void ctrl_bclr(int b, unsigned char *addr)
+static inline void ctrl_bclr(int b, void __iomem *addr)
 {
 	if (__builtin_constant_p(b))
 		__asm__("bclr %1,%0" : "+WU"(*addr): "i"(b));
@@ -44,7 +49,7 @@ static inline void ctrl_bclr(int b, unsigned char *addr)
 		__asm__("bclr %w1,%0" : "+WU"(*addr): "r"(b));
 }
 
-static inline void ctrl_bset(int b, unsigned char *addr)
+static inline void ctrl_bset(int b, void __iomem *addr)
 {
 	if (__builtin_constant_p(b))
 		__asm__("bset %1,%0" : "+WU"(*addr): "i"(b));
@@ -52,6 +57,8 @@ static inline void ctrl_bset(int b, unsigned char *addr)
 		__asm__("bset %w1,%0" : "+WU"(*addr): "r"(b));
 }
 
+#include <asm-generic/io.h>
+
 #endif /* __KERNEL__ */
 
 #endif /* _H8300_IO_H */

arch/h8300/kernel/setup.c

@@ -207,14 +207,14 @@ device_initcall(device_probe);
 #define get_wait(base, addr) ({		\
 	int baddr;			\
 	baddr = ((addr) / 0x200000 * 2);			     \
-	w *= (ctrl_inw((unsigned long)(base) + 2) & (3 << baddr)) + 1;	\
+	w *= (readw((base) + 2) & (3 << baddr)) + 1;		     \
 	})
 #endif
 #if defined(CONFIG_CPU_H8S)
 #define get_wait(base, addr) ({		\
 	int baddr;			\
 	baddr = ((addr) / 0x200000 * 16);			     \
-	w *= (ctrl_inl((unsigned long)(base) + 2) & (7 << baddr)) + 1;	\
+	w *= (readl((base) + 2) & (7 << baddr)) + 1;	\
 	})
 #endif
 
@@ -228,8 +228,8 @@ static __init int access_timing(void)
 
 	bsc = of_find_compatible_node(NULL, NULL, "renesas,h8300-bsc");
 	base = of_iomap(bsc, 0);
-	w = (ctrl_inb((unsigned long)base + 0) & bit)?2:1;
-	if (ctrl_inb((unsigned long)base + 1) & bit)
+	w = (readb(base + 0) & bit)?2:1;
+	if (readb(base + 1) & bit)
 		w *= get_wait(base, addr);
 	else
 		w *= 2;

drivers/clocksource/Kconfig

@@ -28,10 +28,16 @@ config CLKSRC_MMIO
 	bool
 
 config DIGICOLOR_TIMER
-	bool
+	bool "Digicolor timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	help
+	  Enables the support for the digicolor timer driver.
 
 config DW_APB_TIMER
-	bool
+	bool "DW APB timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	help
+	  Enables the support for the dw_apb timer.
 
 config DW_APB_TIMER_OF
 	bool
@@ -39,47 +45,77 @@ config DW_APB_TIMER_OF
 	select CLKSRC_OF
 
 config ROCKCHIP_TIMER
-	bool
+	bool "Rockchip timer driver" if COMPILE_TEST
+	depends on ARM || ARM64
 	select CLKSRC_OF
+	help
+	  Enables the support for the rockchip timer driver.
 
 config ARMADA_370_XP_TIMER
-	bool
+	bool "Armada 370 and XP timer driver" if COMPILE_TEST
+	depends on ARM
 	select CLKSRC_OF
+	help
+	  Enables the support for the Armada 370 and XP timer driver.
 
 config MESON6_TIMER
-	bool
+	bool "Meson6 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_MMIO
+	help
+	  Enables the support for the Meson6 timer driver.
 
 config ORION_TIMER
+	bool "Orion timer driver" if COMPILE_TEST
+	depends on ARM
 	select CLKSRC_OF
 	select CLKSRC_MMIO
-	bool
+	help
+	  Enables the support for the Orion timer driver
 
 config SUN4I_TIMER
+	bool "Sun4i timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_MMIO
-	bool
+	help
+	  Enables support for the Sun4i timer.
 
 config SUN5I_HSTIMER
+	bool "Sun5i timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
-	bool
+	depends on COMMON_CLK
+	help
+	  Enables support the Sun5i timer.
 
 config TEGRA_TIMER
-	bool
+	bool "Tegra timer driver" if COMPILE_TEST
+	depends on ARM
+	help
+	  Enables support for the Tegra driver.
 
 config VT8500_TIMER
-	bool
+	bool "VT8500 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	help
+	  Enables support for the VT8500 driver.
 
 config CADENCE_TTC_TIMER
-	bool
+	bool "Cadence TTC timer driver" if COMPILE_TEST
+	depends on COMMON_CLK
+	help
+	  Enables support for the cadence ttc driver.
 
 config ASM9260_TIMER
-	bool
+	bool "ASM9260 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_MMIO
 	select CLKSRC_OF
+	help
+	  Enables support for the ASM9260 timer.
 
 config CLKSRC_NOMADIK_MTU
-	bool
-	depends on (ARCH_NOMADIK || ARCH_U8500)
+	bool "Nomakdik clocksource driver" if COMPILE_TEST
+	depends on ARM
 	select CLKSRC_MMIO
 	help
 	  Support for Multi Timer Unit. MTU provides access
@@ -93,9 +129,8 @@ config CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	  Use the Multi Timer Unit as the sched_clock.
 
 config CLKSRC_DBX500_PRCMU
-	bool "Clocksource PRCMU Timer"
-	depends on UX500_SOC_DB8500
-	default y
+	bool "Clocksource PRCMU Timer" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	help
 	  Use the always on PRCMU Timer as clocksource
 
@@ -116,13 +151,18 @@ config CLKSRC_EFM32
 	  event device.
 
 config CLKSRC_LPC32XX
-	bool
+	bool "Clocksource for LPC32XX" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_MMIO
 	select CLKSRC_OF
+	help
+	  Support for the LPC32XX clocksource.
 
 config CLKSRC_PISTACHIO
-	bool
+	bool "Clocksource for Pistachio SoC" if COMPILE_TEST
 	select CLKSRC_OF
+	help
+	  Enables the clocksource for the Pistachio SoC.
 
 config CLKSRC_TI_32K
 	bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
@@ -199,13 +239,14 @@ config CLKSRC_METAG_GENERIC
 	  This option enables support for the Meta per-thread timers.
 
 config CLKSRC_EXYNOS_MCT
-	def_bool y if ARCH_EXYNOS
-	depends on !ARM64
+	bool "Exynos multi core timer driver" if COMPILE_TEST
+	depends on ARM
 	help
 	  Support for Multi Core Timer controller on Exynos SoCs.
 
 config CLKSRC_SAMSUNG_PWM
-	bool
+	bool "PWM timer drvier for Samsung S3C, S5P" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	help
 	  This is a new clocksource driver for the PWM timer found in
 	  Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
@@ -213,7 +254,8 @@ config CLKSRC_SAMSUNG_PWM
 	  needed only on systems that do not have the Exynos MCT available.
 
 config FSL_FTM_TIMER
-	bool
+	bool "Freescale FlexTimer Module driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	help
 	  Support for Freescale FlexTimer Module (FTM) timer.
 
@@ -226,9 +268,12 @@ config SYS_SUPPORTS_SH_CMT
         bool
 
 config MTK_TIMER
+	bool "Mediatek timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_OF
 	select CLKSRC_MMIO
-	bool
+	help
+	  Support for Mediatek timer driver.
 
 config SYS_SUPPORTS_SH_MTU2
         bool
@@ -279,7 +324,12 @@ config EM_TIMER_STI
 	  such as EMEV2 from former NEC Electronics.
 
 config CLKSRC_QCOM
-	bool
+	bool "Qualcomm MSM timer" if COMPILE_TEST
+	depends on ARM
+	select CLKSRC_OF
+	help
+	  This enables the clocksource and the per CPU clockevent driver for the
+	  Qualcomm SoCs.
 
 config CLKSRC_VERSATILE
 	bool "ARM Versatile (Express) reference platforms clock source"
@@ -298,21 +348,40 @@ config CLKSRC_MIPS_GIC
 	select CLKSRC_OF
 
 config CLKSRC_TANGO_XTAL
-	bool
+	bool "Clocksource for Tango SoC" if COMPILE_TEST
+	depends on ARM
 	select CLKSRC_OF
+	select CLKSRC_MMIO
+	help
+	  This enables the clocksource for Tango SoC
 
 config CLKSRC_PXA
-	def_bool y if ARCH_PXA || ARCH_SA1100
-	select CLKSRC_OF if OF
+	bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
 	help
 	  This enables OST0 support available on PXA and SA-11x0
 	  platforms.
 
+config H8300_TMR8
+        bool "Clockevent timer for the H8300 platform" if COMPILE_TEST
+        depends on GENERIC_CLOCKEVENTS
+	help
+	  This enables the 8 bits timer for the H8300 platform.
+
 config H8300_TMR16
-        bool
+        bool "Clockevent timer for the H83069 platform" if COMPILE_TEST
+        depends on GENERIC_CLOCKEVENTS
+	help
+	  This enables the 16 bits timer for the H8300 platform with the
+	  H83069 cpu.
 
 config H8300_TPU
-        bool
+        bool "Clocksource for the H8300 platform" if COMPILE_TEST
+        depends on GENERIC_CLOCKEVENTS
+	help
+	  This enables the clocksource for the H8300 platform with the
+	  H8S2678 cpu.
 
 config CLKSRC_IMX_GPT
 	bool "Clocksource using i.MX GPT" if COMPILE_TEST
@@ -320,8 +389,7 @@ config CLKSRC_IMX_GPT
 	select CLKSRC_MMIO
 
 config CLKSRC_ST_LPC
-	bool
-	depends on ARCH_STI
+	bool "Low power clocksource found in the LPC" if COMPILE_TEST
 	select CLKSRC_OF if OF
 	help
 	  Enable this option to use the Low Power controller timer

drivers/clocksource/Makefile

@@ -60,7 +60,7 @@ obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
-obj-$(CONFIG_H8300)			+= h8300_timer8.o
+obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o

drivers/clocksource/acpi_pm.c

@@ -109,10 +109,8 @@ static void acpi_pm_check_blacklist(struct pci_dev *dev)
 
 	/* the bug has been fixed in PIIX4M */
 	if (dev->revision < 3) {
-		printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
-		       " Due to workarounds for a bug,\n"
-		       "* this clock source is slow. Consider trying"
-		       " other clock sources\n");
+		pr_warn("* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,\n"
+			"* this clock source is slow. Consider trying other clock sources\n");
 
 		acpi_pm_need_workaround();
 	}
@@ -125,12 +123,9 @@ static void acpi_pm_check_graylist(struct pci_dev *dev)
 	if (acpi_pm_good)
 		return;
 
-	printk(KERN_WARNING "* The chipset may have PM-Timer Bug. Due to"
-	       " workarounds for a bug,\n"
-	       "* this clock source is slow. If you are sure your timer"
-	       " does not have\n"
-	       "* this bug, please use \"acpi_pm_good\" to disable the"
-	       " workaround\n");
+	pr_warn("* The chipset may have PM-Timer Bug. Due to workarounds for a bug,\n"
+		"* this clock source is slow. If you are sure your timer does not have\n"
+		"* this bug, please use \"acpi_pm_good\" to disable the workaround\n");
 
 	acpi_pm_need_workaround();
 }
@@ -162,8 +157,7 @@ static int verify_pmtmr_rate(void)
 	/* Check that the PMTMR delta is within 5% of what we expect */
 	if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 ||
 	    delta > (PMTMR_EXPECTED_RATE * 21) / 20) {
-		printk(KERN_INFO "PM-Timer running at invalid rate: %lu%% "
-			"of normal - aborting.\n",
+		pr_info("PM-Timer running at invalid rate: %lu%% of normal - aborting.\n",
 			100UL * delta / PMTMR_EXPECTED_RATE);
 		return -1;
 	}
@@ -199,15 +193,14 @@ static int __init init_acpi_pm_clocksource(void)
 				break;
 			if ((value2 < value1) && ((value2) < 0xFFF))
 				break;
-			printk(KERN_INFO "PM-Timer had inconsistent results:"
-			       " %#llx, %#llx - aborting.\n",
-			       value1, value2);
+			pr_info("PM-Timer had inconsistent results: %#llx, %#llx - aborting.\n",
+				value1, value2);
 			pmtmr_ioport = 0;
 			return -EINVAL;
 		}
 		if (i == ACPI_PM_READ_CHECKS) {
-			printk(KERN_INFO "PM-Timer failed consistency check "
-			       " (%#llx) - aborting.\n", value1);
+			pr_info("PM-Timer failed consistency check  (%#llx) - aborting.\n",
+				value1);
 			pmtmr_ioport = 0;
 			return -ENODEV;
 		}

drivers/clocksource/arm_global_timer.c

@@ -99,17 +99,17 @@ static void gt_compare_set(unsigned long delta, int periodic)
 
 	counter += delta;
 	ctrl = GT_CONTROL_TIMER_ENABLE;
-	writel(ctrl, gt_base + GT_CONTROL);
-	writel(lower_32_bits(counter), gt_base + GT_COMP0);
-	writel(upper_32_bits(counter), gt_base + GT_COMP1);
+	writel_relaxed(ctrl, gt_base + GT_CONTROL);
+	writel_relaxed(lower_32_bits(counter), gt_base + GT_COMP0);
+	writel_relaxed(upper_32_bits(counter), gt_base + GT_COMP1);
 
 	if (periodic) {
-		writel(delta, gt_base + GT_AUTO_INC);
+		writel_relaxed(delta, gt_base + GT_AUTO_INC);
 		ctrl |= GT_CONTROL_AUTO_INC;
 	}
 
 	ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE;
-	writel(ctrl, gt_base + GT_CONTROL);
+	writel_relaxed(ctrl, gt_base + GT_CONTROL);
 }
 
 static int gt_clockevent_shutdown(struct clock_event_device *evt)
@@ -195,12 +195,23 @@ static cycle_t gt_clocksource_read(struct clocksource *cs)
 	return gt_counter_read();
 }
 
+static void gt_resume(struct clocksource *cs)
+{
+	unsigned long ctrl;
+
+	ctrl = readl(gt_base + GT_CONTROL);
+	if (!(ctrl & GT_CONTROL_TIMER_ENABLE))
+		/* re-enable timer on resume */
+		writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
+}
+
 static struct clocksource gt_clocksource = {
 	.name	= "arm_global_timer",
 	.rating	= 300,
 	.read	= gt_clocksource_read,
 	.mask	= CLOCKSOURCE_MASK(64),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume = gt_resume,
 };
 
 #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK

drivers/clocksource/dw_apb_timer.c

@@ -49,20 +49,31 @@ clocksource_to_dw_apb_clocksource(struct clocksource *cs)
 	return container_of(cs, struct dw_apb_clocksource, cs);
 }
 
-static unsigned long apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
+static inline u32 apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
 {
 	return readl(timer->base + offs);
 }
 
-static void apbt_writel(struct dw_apb_timer *timer, unsigned long val,
-		 unsigned long offs)
+static inline void apbt_writel(struct dw_apb_timer *timer, u32 val,
+			unsigned long offs)
 {
 	writel(val, timer->base + offs);
 }
 
+static inline u32 apbt_readl_relaxed(struct dw_apb_timer *timer, unsigned long offs)
+{
+	return readl_relaxed(timer->base + offs);
+}
+
+static inline void apbt_writel_relaxed(struct dw_apb_timer *timer, u32 val,
+			unsigned long offs)
+{
+	writel_relaxed(val, timer->base + offs);
+}
+
 static void apbt_disable_int(struct dw_apb_timer *timer)
 {
-	unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+	u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
 
 	ctrl |= APBTMR_CONTROL_INT;
 	apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
@@ -81,7 +92,7 @@ void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced)
 
 static void apbt_eoi(struct dw_apb_timer *timer)
 {
-	apbt_readl(timer, APBTMR_N_EOI);
+	apbt_readl_relaxed(timer, APBTMR_N_EOI);
 }
 
 static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
@@ -103,7 +114,7 @@ static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
 
 static void apbt_enable_int(struct dw_apb_timer *timer)
 {
-	unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+	u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
 	/* clear pending intr */
 	apbt_readl(timer, APBTMR_N_EOI);
 	ctrl &= ~APBTMR_CONTROL_INT;
@@ -113,7 +124,7 @@ static void apbt_enable_int(struct dw_apb_timer *timer)
 static int apbt_shutdown(struct clock_event_device *evt)
 {
 	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
-	unsigned long ctrl;
+	u32 ctrl;
 
 	pr_debug("%s CPU %d state=shutdown\n", __func__,
 		 cpumask_first(evt->cpumask));
@@ -127,7 +138,7 @@ static int apbt_shutdown(struct clock_event_device *evt)
 static int apbt_set_oneshot(struct clock_event_device *evt)
 {
 	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
-	unsigned long ctrl;
+	u32 ctrl;
 
 	pr_debug("%s CPU %d state=oneshot\n", __func__,
 		 cpumask_first(evt->cpumask));
@@ -160,7 +171,7 @@ static int apbt_set_periodic(struct clock_event_device *evt)
 {
 	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 	unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
-	unsigned long ctrl;
+	u32 ctrl;
 
 	pr_debug("%s CPU %d state=periodic\n", __func__,
 		 cpumask_first(evt->cpumask));
@@ -196,17 +207,17 @@ static int apbt_resume(struct clock_event_device *evt)
 static int apbt_next_event(unsigned long delta,
 			   struct clock_event_device *evt)
 {
-	unsigned long ctrl;
+	u32 ctrl;
 	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 
 	/* Disable timer */
-	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	ctrl = apbt_readl_relaxed(&dw_ced->timer, APBTMR_N_CONTROL);
 	ctrl &= ~APBTMR_CONTROL_ENABLE;
-	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 	/* write new count */
-	apbt_writel(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
+	apbt_writel_relaxed(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
 	ctrl |= APBTMR_CONTROL_ENABLE;
-	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 
 	return 0;
 }
@@ -323,7 +334,7 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
 	 * start count down from 0xffff_ffff. this is done by toggling the
 	 * enable bit then load initial load count to ~0.
 	 */
-	unsigned long ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
+	u32 ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
 
 	ctrl &= ~APBTMR_CONTROL_ENABLE;
 	apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
@@ -338,11 +349,12 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
 
 static cycle_t __apbt_read_clocksource(struct clocksource *cs)
 {
-	unsigned long current_count;
+	u32 current_count;
 	struct dw_apb_clocksource *dw_cs =
 		clocksource_to_dw_apb_clocksource(cs);
 
-	current_count = apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
+	current_count = apbt_readl_relaxed(&dw_cs->timer,
+					APBTMR_N_CURRENT_VALUE);
 
 	return (cycle_t)~current_count;
 }

drivers/clocksource/dw_apb_timer_of.c

@@ -16,6 +16,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+#include <linux/delay.h>
 #include <linux/dw_apb_timer.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -130,6 +131,17 @@ static void __init init_sched_clock(void)
 	sched_clock_register(read_sched_clock, 32, sched_rate);
 }
 
+#ifdef CONFIG_ARM
+static unsigned long dw_apb_delay_timer_read(void)
+{
+	return ~readl_relaxed(sched_io_base);
+}
+
+static struct delay_timer dw_apb_delay_timer = {
+	.read_current_timer	= dw_apb_delay_timer_read,
+};
+#endif
+
 static int num_called;
 static void __init dw_apb_timer_init(struct device_node *timer)
 {
@@ -142,6 +154,10 @@ static void __init dw_apb_timer_init(struct device_node *timer)
 		pr_debug("%s: found clocksource timer\n", __func__);
 		add_clocksource(timer);
 		init_sched_clock();
+#ifdef CONFIG_ARM
+		dw_apb_delay_timer.freq = sched_rate;
+		register_current_timer_delay(&dw_apb_delay_timer);
+#endif
 		break;
 	default:
 		break;

drivers/clocksource/h8300_timer16.c

@@ -4,85 +4,56 @@
  *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
  */
 
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/clocksource.h>
-#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/segment.h>
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define TSTR	0
-#define TSNC	1
-#define TMDR	2
-#define TOLR	3
-#define TISRA	4
-#define TISRB	5
 #define TISRC	6
 
 #define TCR	0
-#define TIOR	1
 #define TCNT	2
-#define GRA	4
-#define GRB	6
-
-#define FLAG_REPROGRAM (1 << 0)
-#define FLAG_SKIPEVENT (1 << 1)
-#define FLAG_IRQCONTEXT (1 << 2)
-#define FLAG_STARTED (1 << 3)
 
-#define ONESHOT  0
-#define PERIODIC 1
-
-#define RELATIVE 0
-#define ABSOLUTE 1
+#define bset(b, a) iowrite8(ioread8(a) | (1 << (b)), (a))
+#define bclr(b, a) iowrite8(ioread8(a) & ~(1 << (b)), (a))
 
 struct timer16_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct irqaction irqaction;
 	unsigned long total_cycles;
-	unsigned long mapbase;
-	unsigned long mapcommon;
-	unsigned long flags;
-	unsigned short gra;
+	void __iomem *mapbase;
+	void __iomem *mapcommon;
 	unsigned short cs_enabled;
 	unsigned char enb;
-	unsigned char imfa;
-	unsigned char imiea;
 	unsigned char ovf;
-	raw_spinlock_t lock;
-	struct clk *clk;
+	unsigned char ovie;
 };
 
 static unsigned long timer16_get_counter(struct timer16_priv *p)
 {
-	unsigned long v1, v2, v3;
-	int o1, o2;
+	unsigned short v1, v2, v3;
+	unsigned char  o1, o2;
 
-	o1 = ctrl_inb(p->mapcommon + TISRC) & p->ovf;
+	o1 = ioread8(p->mapcommon + TISRC) & p->ovf;
 
 	/* Make sure the timer value is stable. Stolen from acpi_pm.c */
 	do {
 		o2 = o1;
-		v1 = ctrl_inw(p->mapbase + TCNT);
-		v2 = ctrl_inw(p->mapbase + TCNT);
-		v3 = ctrl_inw(p->mapbase + TCNT);
-		o1 = ctrl_inb(p->mapcommon + TISRC) & p->ovf;
+		v1 = ioread16be(p->mapbase + TCNT);
+		v2 = ioread16be(p->mapbase + TCNT);
+		v3 = ioread16be(p->mapbase + TCNT);
+		o1 = ioread8(p->mapcommon + TISRC) & p->ovf;
 	} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
 			  || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
 
-	v2 |= 0x10000;
-	return v2;
+	if (likely(!o1))
+		return v2;
+	else
+		return v2 + 0x10000;
 }
 
 
@@ -90,8 +61,7 @@ static irqreturn_t timer16_interrupt(int irq, void *dev_id)
 {
 	struct timer16_priv *p = (struct timer16_priv *)dev_id;
 
-	ctrl_outb(ctrl_inb(p->mapcommon + TISRA) & ~p->imfa,
-		  p->mapcommon + TISRA);
+	bclr(p->ovf, p->mapcommon + TISRC);
 	p->total_cycles += 0x10000;
 
 	return IRQ_HANDLED;
@@ -105,13 +75,10 @@ static inline struct timer16_priv *cs_to_priv(struct clocksource *cs)
 static cycle_t timer16_clocksource_read(struct clocksource *cs)
 {
 	struct timer16_priv *p = cs_to_priv(cs);
-	unsigned long flags, raw;
-	unsigned long value;
+	unsigned long raw, value;
 
-	raw_spin_lock_irqsave(&p->lock, flags);
 	value = p->total_cycles;
 	raw = timer16_get_counter(p);
-	raw_spin_unlock_irqrestore(&p->lock, flags);
 
 	return value + raw;
 }
@@ -123,10 +90,10 @@ static int timer16_enable(struct clocksource *cs)
 	WARN_ON(p->cs_enabled);
 
 	p->total_cycles = 0;
-	ctrl_outw(0x0000, p->mapbase + TCNT);
-	ctrl_outb(0x83, p->mapbase + TCR);
-	ctrl_outb(ctrl_inb(p->mapcommon + TSTR) | p->enb,
-		  p->mapcommon + TSTR);
+	iowrite16be(0x0000, p->mapbase + TCNT);
+	iowrite8(0x83, p->mapbase + TCR);
+	bset(p->ovie, p->mapcommon + TISRC);
+	bset(p->enb, p->mapcommon + TSTR);
 
 	p->cs_enabled = true;
 	return 0;
@@ -138,116 +105,83 @@ static void timer16_disable(struct clocksource *cs)
 
 	WARN_ON(!p->cs_enabled);
 
-	ctrl_outb(ctrl_inb(p->mapcommon + TSTR) & ~p->enb,
-		  p->mapcommon + TSTR);
+	bclr(p->ovie, p->mapcommon + TISRC);
+	bclr(p->enb, p->mapcommon + TSTR);
 
 	p->cs_enabled = false;
 }
 
+static struct timer16_priv timer16_priv = {
+	.cs = {
+		.name = "h8300_16timer",
+		.rating = 200,
+		.read = timer16_clocksource_read,
+		.enable = timer16_enable,
+		.disable = timer16_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define REG_CH   0
 #define REG_COMM 1
 
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
 {
-	struct resource *res[2];
+	void __iomem *base[2];
 	int ret, irq;
 	unsigned int ch;
+	struct clk *clk;
 
-	p->pdev = pdev;
-
-	res[REG_CH] = platform_get_resource(p->pdev,
-					    IORESOURCE_MEM, REG_CH);
-	res[REG_COMM] = platform_get_resource(p->pdev,
-					      IORESOURCE_MEM, REG_COMM);
-	if (!res[REG_CH] || !res[REG_COMM]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
-	}
-	irq = platform_get_irq(p->pdev, 0);
-	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return irq;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[REG_CH] = of_iomap(node, 0);
+	if (!base[REG_CH]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
-	p->pdev = pdev;
-	p->mapbase = res[REG_CH]->start;
-	p->mapcommon = res[REG_COMM]->start;
-	p->enb = 1 << ch;
-	p->imfa = 1 << ch;
-	p->imiea = 1 << (4 + ch);
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = timer16_clocksource_read;
-	p->cs.enable = timer16_enable;
-	p->cs.disable = timer16_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	ret = request_irq(irq, timer16_interrupt,
-			  IRQF_TIMER, pdev->name, p);
-	if (ret < 0) {
-		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		return ret;
+	base[REG_COMM] = of_iomap(node, 1);
+	if (!base[REG_COMM]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_ch;
 	}
 
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
-	return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
-	struct timer16_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq) {
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_comm;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	of_property_read_u32(node, "renesas,channel", &ch);
 
-	return timer16_setup(p, pdev);
-}
-
-static int timer16_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
+	timer16_priv.mapbase = base[REG_CH];
+	timer16_priv.mapcommon = base[REG_COMM];
+	timer16_priv.enb = ch;
+	timer16_priv.ovf = ch;
+	timer16_priv.ovie = 4 + ch;
 
-static const struct of_device_id timer16_of_table[] = {
-	{ .compatible = "renesas,16bit-timer" },
-	{ }
-};
-static struct platform_driver timer16_driver = {
-	.probe		= timer16_probe,
-	.remove		= timer16_remove,
-	.driver		= {
-		.name	= "h8300h-16timer",
-		.of_match_table = of_match_ptr(timer16_of_table),
+	ret = request_irq(irq, timer16_interrupt,
+			  IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+	if (ret < 0) {
+		pr_err("failed to request irq %d of clocksource\n", irq);
+		goto unmap_comm;
 	}
-};
 
-static int __init timer16_init(void)
-{
-	return platform_driver_register(&timer16_driver);
-}
+	clocksource_register_hz(&timer16_priv.cs,
+				clk_get_rate(clk) / 8);
+	return;
 
-static void __exit timer16_exit(void)
-{
-	platform_driver_unregister(&timer16_driver);
+unmap_comm:
+	iounmap(base[REG_COMM]);
+unmap_ch:
+	iounmap(base[REG_CH]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);

drivers/clocksource/h8300_timer8.c

@@ -8,19 +8,15 @@
  */
 
 #include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
 #include <linux/clockchips.h>
-#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define _8TCR	0
 #define _8TCSR	2
@@ -28,126 +24,74 @@
 #define TCORB	6
 #define _8TCNT	8
 
-#define FLAG_REPROGRAM (1 << 0)
-#define FLAG_SKIPEVENT (1 << 1)
-#define FLAG_IRQCONTEXT (1 << 2)
+#define CMIEA	6
+#define CMFA	6
+
 #define FLAG_STARTED (1 << 3)
 
-#define ONESHOT  0
-#define PERIODIC 1
+#define SCALE 64
 
-#define RELATIVE 0
-#define ABSOLUTE 1
+#define bset(b, a) iowrite8(ioread8(a) | (1 << (b)), (a))
+#define bclr(b, a) iowrite8(ioread8(a) & ~(1 << (b)), (a))
 
 struct timer8_priv {
-	struct platform_device *pdev;
 	struct clock_event_device ced;
-	struct irqaction irqaction;
-	unsigned long mapbase;
-	raw_spinlock_t lock;
+	void __iomem *mapbase;
 	unsigned long flags;
 	unsigned int rate;
-	unsigned int tcora;
-	struct clk *pclk;
 };
 
-static unsigned long timer8_get_counter(struct timer8_priv *p)
-{
-	unsigned long v1, v2, v3;
-	int o1, o2;
-
-	o1 = ctrl_inb(p->mapbase + _8TCSR) & 0x20;
-
-	/* Make sure the timer value is stable. Stolen from acpi_pm.c */
-	do {
-		o2 = o1;
-		v1 = ctrl_inw(p->mapbase + _8TCNT);
-		v2 = ctrl_inw(p->mapbase + _8TCNT);
-		v3 = ctrl_inw(p->mapbase + _8TCNT);
-		o1 = ctrl_inb(p->mapbase + _8TCSR) & 0x20;
-	} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
-			  || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
-
-	v2 |= o1 << 10;
-	return v2;
-}
-
 static irqreturn_t timer8_interrupt(int irq, void *dev_id)
 {
 	struct timer8_priv *p = dev_id;
 
-	ctrl_outb(ctrl_inb(p->mapbase + _8TCSR) & ~0x40,
-		  p->mapbase + _8TCSR);
-	p->flags |= FLAG_IRQCONTEXT;
-	ctrl_outw(p->tcora, p->mapbase + TCORA);
-	if (!(p->flags & FLAG_SKIPEVENT)) {
-		if (clockevent_state_oneshot(&p->ced))
-			ctrl_outw(0x0000, p->mapbase + _8TCR);
-		p->ced.event_handler(&p->ced);
-	}
-	p->flags &= ~(FLAG_SKIPEVENT | FLAG_IRQCONTEXT);
+	if (clockevent_state_oneshot(&p->ced))
+		iowrite16be(0x0000, p->mapbase + _8TCR);
+
+	p->ced.event_handler(&p->ced);
+
+	bclr(CMFA, p->mapbase + _8TCSR);
 
 	return IRQ_HANDLED;
 }
 
 static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 {
-	unsigned long flags;
-	unsigned long now;
-
-	raw_spin_lock_irqsave(&p->lock, flags);
 	if (delta >= 0x10000)
-		dev_warn(&p->pdev->dev, "delta out of range\n");
-	now = timer8_get_counter(p);
-	p->tcora = delta;
-	ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40, p->mapbase + _8TCR);
-	if (delta > now)
-		ctrl_outw(delta, p->mapbase + TCORA);
-	else
-		ctrl_outw(now + 1, p->mapbase + TCORA);
-
-	raw_spin_unlock_irqrestore(&p->lock, flags);
+		pr_warn("delta out of range\n");
+	bclr(CMIEA, p->mapbase + _8TCR);
+	iowrite16be(delta, p->mapbase + TCORA);
+	iowrite16be(0x0000, p->mapbase + _8TCNT);
+	bclr(CMFA, p->mapbase + _8TCSR);
+	bset(CMIEA, p->mapbase + _8TCR);
 }
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	p->rate = clk_get_rate(p->pclk) / 64;
-	ctrl_outw(0xffff, p->mapbase + TCORA);
-	ctrl_outw(0x0000, p->mapbase + _8TCNT);
-	ctrl_outw(0x0c02, p->mapbase + _8TCR);
+	iowrite16be(0xffff, p->mapbase + TCORA);
+	iowrite16be(0x0000, p->mapbase + _8TCNT);
+	iowrite16be(0x0c02, p->mapbase + _8TCR);
 
 	return 0;
 }
 
 static int timer8_start(struct timer8_priv *p)
 {
-	int ret = 0;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&p->lock, flags);
-
-	if (!(p->flags & FLAG_STARTED))
-		ret = timer8_enable(p);
+	int ret;
 
-	if (ret)
-		goto out;
-	p->flags |= FLAG_STARTED;
+	if ((p->flags & FLAG_STARTED))
+		return 0;
 
- out:
-	raw_spin_unlock_irqrestore(&p->lock, flags);
+	ret = timer8_enable(p);
+	if (!ret)
+		p->flags |= FLAG_STARTED;
 
 	return ret;
 }
 
 static void timer8_stop(struct timer8_priv *p)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&p->lock, flags);
-
-	ctrl_outw(0x0000, p->mapbase + _8TCR);
-
-	raw_spin_unlock_irqrestore(&p->lock, flags);
+	iowrite16be(0x0000, p->mapbase + _8TCR);
 }
 
 static inline struct timer8_priv *ced_to_priv(struct clock_event_device *ced)
@@ -155,7 +99,7 @@ static inline struct timer8_priv *ced_to_priv(struct clock_event_device *ced)
 	return container_of(ced, struct timer8_priv, ced);
 }
 
-static void timer8_clock_event_start(struct timer8_priv *p, int periodic)
+static void timer8_clock_event_start(struct timer8_priv *p, unsigned long delta)
 {
 	struct clock_event_device *ced = &p->ced;
 
@@ -166,7 +110,7 @@ static void timer8_clock_event_start(struct timer8_priv *p, int periodic)
 	ced->max_delta_ns = clockevent_delta2ns(0xffff, ced);
 	ced->min_delta_ns = clockevent_delta2ns(0x0001, ced);
 
-	timer8_set_next(p, periodic?(p->rate + HZ/2) / HZ:0x10000);
+	timer8_set_next(p, delta);
 }
 
 static int timer8_clock_event_shutdown(struct clock_event_device *ced)
@@ -179,9 +123,9 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for periodic clock events\n");
+	pr_info("%s: used for periodic clock events\n", ced->name);
 	timer8_stop(p);
-	timer8_clock_event_start(p, PERIODIC);
+	timer8_clock_event_start(p, (p->rate + HZ/2) / HZ);
 
 	return 0;
 }
@@ -190,9 +134,9 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	pr_info("%s: used for oneshot clock events\n", ced->name);
 	timer8_stop(p);
-	timer8_clock_event_start(p, ONESHOT);
+	timer8_clock_event_start(p, 0x10000);
 
 	return 0;
 }
@@ -208,110 +152,64 @@ static int timer8_clock_event_next(unsigned long delta,
 	return 0;
 }
 
-static int timer8_setup(struct timer8_priv *p,
-			struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+	.ced = {
+		.name = "h8300_8timer",
+		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 200,
+		.set_next_event = timer8_clock_event_next,
+		.set_state_shutdown = timer8_clock_event_shutdown,
+		.set_state_periodic = timer8_clock_event_periodic,
+		.set_state_oneshot = timer8_clock_event_oneshot,
+	},
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
 {
-	struct resource *res;
+	void __iomem *base;
 	int irq;
-	int ret;
+	struct clk *clk;
 
-	p->pdev = pdev;
-
-	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clockevent\n");
+		return;
 	}
 
-	irq = platform_get_irq(p->pdev, 0);
-	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return -ENXIO;
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("failed to map registers for clockevent\n");
+		goto free_clk;
 	}
 
-	p->mapbase = res->start;
-
-	p->irqaction.name = dev_name(&p->pdev->dev);
-	p->irqaction.handler = timer8_interrupt;
-	p->irqaction.dev_id = p;
-	p->irqaction.flags = IRQF_TIMER;
-
-	p->pclk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->pclk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->pclk);
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq) {
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_reg;
 	}
 
-	p->ced.name = pdev->name;
-	p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
-		CLOCK_EVT_FEAT_ONESHOT;
-	p->ced.rating = 200;
-	p->ced.cpumask = cpumask_of(0);
-	p->ced.set_next_event = timer8_clock_event_next;
-	p->ced.set_state_shutdown = timer8_clock_event_shutdown;
-	p->ced.set_state_periodic = timer8_clock_event_periodic;
-	p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
-	ret = setup_irq(irq, &p->irqaction);
-	if (ret < 0) {
-		dev_err(&p->pdev->dev,
-			"failed to request irq %d\n", irq);
-		return ret;
-	}
-	clockevents_register_device(&p->ced);
-	platform_set_drvdata(pdev, p);
+	timer8_priv.mapbase = base;
 
-	return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
-	struct timer8_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	timer8_priv.rate = clk_get_rate(clk) / SCALE;
+	if (!timer8_priv.rate) {
+		pr_err("Failed to get rate for the clocksource\n");
+		goto unmap_reg;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
-	{ .compatible = "renesas,8bit-timer" },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
-	.probe		= timer8_probe,
-	.remove		= timer8_remove,
-	.driver		= {
-		.name	= "h8300-8timer",
-		.of_match_table = of_match_ptr(timer8_of_table),
+	if (request_irq(irq, timer8_interrupt, IRQF_TIMER,
+			timer8_priv.ced.name, &timer8_priv) < 0) {
+		pr_err("failed to request irq %d for clockevent\n", irq);
+		goto unmap_reg;
 	}
-};
 
-static int __init timer8_init(void)
-{
-	return platform_driver_register(&timer8_driver);
-}
+	clockevents_config_and_register(&timer8_priv.ced,
+					timer8_priv.rate, 1, 0x0000ffff);
 
-static void __exit timer8_exit(void)
-{
-	platform_driver_unregister(&timer8_driver);
+	return;
+unmap_reg:
+	iounmap(base);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);

drivers/clocksource/h8300_tpu.c

@@ -1,42 +1,30 @@
 /*
- *  H8/300 TPU Driver
+ *  H8S TPU Driver
  *
  *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
  *
  */
 
 #include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
 #include <linux/clocksource.h>
-#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
-#include <asm/irq.h>
+#define TCR	0x0
+#define TSR	0x5
+#define TCNT	0x6
 
-#define TCR	0
-#define TMDR	1
-#define TIOR	2
-#define TER	4
-#define TSR	5
-#define TCNT	6
-#define TGRA	8
-#define TGRB	10
-#define TGRC	12
-#define TGRD	14
+#define TCFV	0x10
 
 struct tpu_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct clk *clk;
-	unsigned long mapbase1;
-	unsigned long mapbase2;
+	void __iomem *mapbase1;
+	void __iomem *mapbase2;
 	raw_spinlock_t lock;
 	unsigned int cs_enabled;
 };
@@ -45,8 +33,8 @@ static inline unsigned long read_tcnt32(struct tpu_priv *p)
 {
 	unsigned long tcnt;
 
-	tcnt = ctrl_inw(p->mapbase1 + TCNT) << 16;
-	tcnt |= ctrl_inw(p->mapbase2 + TCNT);
+	tcnt = ioread16be(p->mapbase1 + TCNT) << 16;
+	tcnt |= ioread16be(p->mapbase2 + TCNT);
 	return tcnt;
 }
 
@@ -55,7 +43,7 @@ static int tpu_get_counter(struct tpu_priv *p, unsigned long long *val)
 	unsigned long v1, v2, v3;
 	int o1, o2;
 
-	o1 = ctrl_inb(p->mapbase1 + TSR) & 0x10;
+	o1 = ioread8(p->mapbase1 + TSR) & TCFV;
 
 	/* Make sure the timer value is stable. Stolen from acpi_pm.c */
 	do {
@@ -63,7 +51,7 @@ static int tpu_get_counter(struct tpu_priv *p, unsigned long long *val)
 		v1 = read_tcnt32(p);
 		v2 = read_tcnt32(p);
 		v3 = read_tcnt32(p);
-		o1 = ctrl_inb(p->mapbase1 + TSR) & 0x10;
+		o1 = ioread8(p->mapbase1 + TSR) & TCFV;
 	} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
 			  || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
 
@@ -96,10 +84,10 @@ static int tpu_clocksource_enable(struct clocksource *cs)
 
 	WARN_ON(p->cs_enabled);
 
-	ctrl_outw(0, p->mapbase1 + TCNT);
-	ctrl_outw(0, p->mapbase2 + TCNT);
-	ctrl_outb(0x0f, p->mapbase1 + TCR);
-	ctrl_outb(0x03, p->mapbase2 + TCR);
+	iowrite16be(0, p->mapbase1 + TCNT);
+	iowrite16be(0, p->mapbase2 + TCNT);
+	iowrite8(0x0f, p->mapbase1 + TCR);
+	iowrite8(0x03, p->mapbase2 + TCR);
 
 	p->cs_enabled = true;
 	return 0;
@@ -111,96 +99,59 @@ static void tpu_clocksource_disable(struct clocksource *cs)
 
 	WARN_ON(!p->cs_enabled);
 
-	ctrl_outb(0, p->mapbase1 + TCR);
-	ctrl_outb(0, p->mapbase2 + TCR);
+	iowrite8(0, p->mapbase1 + TCR);
+	iowrite8(0, p->mapbase2 + TCR);
 	p->cs_enabled = false;
 }
 
+static struct tpu_priv tpu_priv = {
+	.cs = {
+		.name = "H8S_TPU",
+		.rating = 200,
+		.read = tpu_clocksource_read,
+		.enable = tpu_clocksource_enable,
+		.disable = tpu_clocksource_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define CH_L 0
 #define CH_H 1
 
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
 {
-	struct resource *res[2];
-
-	p->pdev = pdev;
+	void __iomem *base[2];
+	struct clk *clk;
 
-	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
-	res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
-	if (!res[CH_L] || !res[CH_H]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[CH_L] = of_iomap(node, CH_L);
+	if (!base[CH_L]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-
-	p->mapbase1 = res[CH_L]->start;
-	p->mapbase2 = res[CH_H]->start;
-
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = tpu_clocksource_read;
-	p->cs.enable = tpu_clocksource_enable;
-	p->cs.disable = tpu_clocksource_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
-	struct tpu_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	base[CH_H] = of_iomap(node, CH_H);
+	if (!base[CH_H]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_L;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	tpu_priv.mapbase1 = base[CH_L];
+	tpu_priv.mapbase2 = base[CH_H];
 
-	return tpu_setup(p, pdev);
-}
-
-static int tpu_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id tpu_of_table[] = {
-	{ .compatible = "renesas,tpu" },
-	{ }
-};
+	clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
 
-static struct platform_driver tpu_driver = {
-	.probe		= tpu_probe,
-	.remove		= tpu_remove,
-	.driver		= {
-		.name	= "h8s-tpu",
-		.of_match_table = of_match_ptr(tpu_of_table),
-	}
-};
-
-static int __init tpu_init(void)
-{
-	return platform_driver_register(&tpu_driver);
-}
+	return;
 
-static void __exit tpu_exit(void)
-{
-	platform_driver_unregister(&tpu_driver);
+unmap_L:
+	iounmap(base[CH_H]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);

drivers/clocksource/mtk_timer.c

@@ -16,6 +16,8 @@
  * GNU General Public License for more details.
  */
 
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
@@ -187,10 +189,8 @@ static void __init mtk_timer_init(struct device_node *node)
 	struct clk *clk;
 
 	evt = kzalloc(sizeof(*evt), GFP_KERNEL);
-	if (!evt) {
-		pr_warn("Can't allocate mtk clock event driver struct");
+	if (!evt)
 		return;
-	}
 
 	evt->dev.name = "mtk_tick";
 	evt->dev.rating = 300;
@@ -204,31 +204,31 @@ static void __init mtk_timer_init(struct device_node *node)
 
 	evt->gpt_base = of_io_request_and_map(node, 0, "mtk-timer");
 	if (IS_ERR(evt->gpt_base)) {
-		pr_warn("Can't get resource\n");
-		return;
+		pr_err("Can't get resource\n");
+		goto err_kzalloc;
 	}
 
 	evt->dev.irq = irq_of_parse_and_map(node, 0);
 	if (evt->dev.irq <= 0) {
-		pr_warn("Can't parse IRQ");
+		pr_err("Can't parse IRQ\n");
 		goto err_mem;
 	}
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk)) {
-		pr_warn("Can't get timer clock");
+		pr_err("Can't get timer clock\n");
 		goto err_irq;
 	}
 
 	if (clk_prepare_enable(clk)) {
-		pr_warn("Can't prepare clock");
+		pr_err("Can't prepare clock\n");
 		goto err_clk_put;
 	}
 	rate = clk_get_rate(clk);
 
 	if (request_irq(evt->dev.irq, mtk_timer_interrupt,
 			IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
-		pr_warn("failed to setup irq %d\n", evt->dev.irq);
+		pr_err("failed to setup irq %d\n", evt->dev.irq);
 		goto err_clk_disable;
 	}
 
@@ -260,5 +260,7 @@ err_mem:
 	iounmap(evt->gpt_base);
 	of_address_to_resource(node, 0, &res);
 	release_mem_region(res.start, resource_size(&res));
+err_kzalloc:
+	kfree(evt);
 }
 CLOCKSOURCE_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_timer_init);

drivers/clocksource/rockchip_timer.c

@@ -17,16 +17,16 @@
 
 #define TIMER_NAME "rk_timer"
 
-#define TIMER_LOAD_COUNT0 0x00
-#define TIMER_LOAD_COUNT1 0x04
-#define TIMER_CONTROL_REG 0x10
-#define TIMER_INT_STATUS 0x18
+#define TIMER_LOAD_COUNT0	0x00
+#define TIMER_LOAD_COUNT1	0x04
+#define TIMER_CONTROL_REG	0x10
+#define TIMER_INT_STATUS	0x18
 
-#define TIMER_DISABLE 0x0
-#define TIMER_ENABLE 0x1
-#define TIMER_MODE_FREE_RUNNING (0 << 1)
-#define TIMER_MODE_USER_DEFINED_COUNT (1 << 1)
-#define TIMER_INT_UNMASK (1 << 2)
+#define TIMER_DISABLE		0x0
+#define TIMER_ENABLE		0x1
+#define TIMER_MODE_FREE_RUNNING			(0 << 1)
+#define TIMER_MODE_USER_DEFINED_COUNT		(1 << 1)
+#define TIMER_INT_UNMASK			(1 << 2)
 
 struct bc_timer {
 	struct clock_event_device ce;
@@ -49,14 +49,12 @@ static inline void __iomem *rk_base(struct clock_event_device *ce)
 static inline void rk_timer_disable(struct clock_event_device *ce)
 {
 	writel_relaxed(TIMER_DISABLE, rk_base(ce) + TIMER_CONTROL_REG);
-	dsb();
 }
 
 static inline void rk_timer_enable(struct clock_event_device *ce, u32 flags)
 {
 	writel_relaxed(TIMER_ENABLE | TIMER_INT_UNMASK | flags,
 		       rk_base(ce) + TIMER_CONTROL_REG);
-	dsb();
 }
 
 static void rk_timer_update_counter(unsigned long cycles,
@@ -64,13 +62,11 @@ static void rk_timer_update_counter(unsigned long cycles,
 {
 	writel_relaxed(cycles, rk_base(ce) + TIMER_LOAD_COUNT0);
 	writel_relaxed(0, rk_base(ce) + TIMER_LOAD_COUNT1);
-	dsb();
 }
 
 static void rk_timer_interrupt_clear(struct clock_event_device *ce)
 {
 	writel_relaxed(1, rk_base(ce) + TIMER_INT_STATUS);
-	dsb();
 }
 
 static inline int rk_timer_set_next_event(unsigned long cycles,
@@ -173,4 +169,5 @@ static void __init rk_timer_init(struct device_node *np)
 
 	clockevents_config_and_register(ce, bc_timer.freq, 1, UINT_MAX);
 }
+
 CLOCKSOURCE_OF_DECLARE(rk_timer, "rockchip,rk3288-timer", rk_timer_init);

drivers/clocksource/tango_xtal.c

@@ -19,19 +19,6 @@ static u64 notrace read_sched_clock(void)
 	return read_xtal_counter();
 }
 
-static cycle_t read_clocksource(struct clocksource *cs)
-{
-	return read_xtal_counter();
-}
-
-static struct clocksource tango_xtal = {
-	.name	= "tango-xtal",
-	.rating	= 350,
-	.read	= read_clocksource,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
 static void __init tango_clocksource_init(struct device_node *np)
 {
 	struct clk *clk;
@@ -53,8 +40,9 @@ static void __init tango_clocksource_init(struct device_node *np)
 	delay_timer.freq = xtal_freq;
 	delay_timer.read_current_timer = read_xtal_counter;
 
-	ret = clocksource_register_hz(&tango_xtal, xtal_freq);
-	if (ret != 0) {
+	ret = clocksource_mmio_init(xtal_in_cnt, "tango-xtal", xtal_freq, 350,
+				    32, clocksource_mmio_readl_up);
+	if (!ret) {
 		pr_err("%s: registration failed\n", np->full_name);
 		return;
 	}

drivers/clocksource/tegra20_timer.c

@@ -96,7 +96,8 @@ static struct clock_event_device tegra_clockevent = {
 	.name			= "timer0",
 	.rating			= 300,
 	.features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_PERIODIC,
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DYNIRQ,
 	.set_next_event		= tegra_timer_set_next_event,
 	.set_state_shutdown	= tegra_timer_shutdown,
 	.set_state_periodic	= tegra_timer_set_periodic,

drivers/clocksource/time-lpc32xx.c

@@ -125,7 +125,7 @@ static int __init lpc32xx_clocksource_init(struct device_node *np)
 
 	clk = of_clk_get_by_name(np, "timerclk");
 	if (IS_ERR(clk)) {
-		pr_err("clock get failed (%lu)\n", PTR_ERR(clk));
+		pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
 		return PTR_ERR(clk);
 	}
 
@@ -184,7 +184,7 @@ static int __init lpc32xx_clockevent_init(struct device_node *np)
 
 	clk = of_clk_get_by_name(np, "timerclk");
 	if (IS_ERR(clk)) {
-		pr_err("clock get failed (%lu)\n", PTR_ERR(clk));
+		pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
 		return PTR_ERR(clk);
 	}
 

drivers/clocksource/time-pistachio.c

@@ -84,7 +84,7 @@ pistachio_clocksource_read_cycles(struct clocksource *cs)
 	counter = gpt_readl(pcs->base, TIMER_CURRENT_VALUE, 0);
 	raw_spin_unlock_irqrestore(&pcs->lock, flags);
 
-	return ~(cycle_t)counter;
+	return (cycle_t)~counter;
 }
 
 static u64 notrace pistachio_read_sched_clock(void)

drivers/clocksource/timer-sun5i.c

@@ -152,13 +152,6 @@ static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
-{
-	struct sun5i_timer_clksrc *cs = to_sun5i_timer_clksrc(clksrc);
-
-	return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
-}
-
 static int sun5i_rate_cb_clksrc(struct notifier_block *nb,
 				unsigned long event, void *data)
 {
@@ -217,13 +210,8 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
 	       base + TIMER_CTL_REG(1));
 
-	cs->clksrc.name = node->name;
-	cs->clksrc.rating = 340;
-	cs->clksrc.read = sun5i_clksrc_read;
-	cs->clksrc.mask = CLOCKSOURCE_MASK(32);
-	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-
-	ret = clocksource_register_hz(&cs->clksrc, rate);
+	ret = clocksource_mmio_init(base + TIMER_CNTVAL_LO_REG(1), node->name,
+				    rate, 340, 32, clocksource_mmio_readl_down);
 	if (ret) {
 		pr_err("Couldn't register clock source.\n");
 		goto err_remove_notifier;

drivers/clocksource/vt8500_timer.c

@@ -30,7 +30,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/delay.h>
-#include <asm/mach/time.h>
 
 #include <linux/of.h>
 #include <linux/of_address.h>

drivers/irqchip/irq-renesas-h8300h.c

@@ -21,9 +21,9 @@ static const char ipr_bit[] = {
 	10, 10, 10, 10,  9,  9,  9,  9,
 };
 
-static void *intc_baseaddr;
+static void __iomem *intc_baseaddr;
 
-#define IPR ((unsigned long)intc_baseaddr + 6)
+#define IPR (intc_baseaddr + 6)
 
 static void h8300h_disable_irq(struct irq_data *data)
 {
@@ -81,8 +81,8 @@ static int __init h8300h_intc_of_init(struct device_node *intc,
 	BUG_ON(!intc_baseaddr);
 
 	/* All interrupt priority low */
-	ctrl_outb(0x00, IPR + 0);
-	ctrl_outb(0x00, IPR + 1);
+	writeb(0x00, IPR + 0);
+	writeb(0x00, IPR + 1);
 
 	domain = irq_domain_add_linear(intc, NR_IRQS, &irq_ops, NULL);
 	BUG_ON(!domain);

include/linux/clocksource.h

@@ -62,12 +62,18 @@ struct module;
  * @suspend:		suspend function for the clocksource, if necessary
  * @resume:		resume function for the clocksource, if necessary
  * @owner:		module reference, must be set by clocksource in modules
+ *
+ * Note: This struct is not used in hotpathes of the timekeeping code
+ * because the timekeeper caches the hot path fields in its own data
+ * structure, so no line cache alignment is required,
+ *
+ * The pointer to the clocksource itself is handed to the read
+ * callback. If you need extra information there you can wrap struct
+ * clocksource into your own struct. Depending on the amount of
+ * information you need you should consider to cache line align that
+ * structure.
  */
 struct clocksource {
-	/*
-	 * Hotpath data, fits in a single cache line when the
-	 * clocksource itself is cacheline aligned.
-	 */
 	cycle_t (*read)(struct clocksource *cs);
 	cycle_t mask;
 	u32 mult;
@@ -95,7 +101,7 @@ struct clocksource {
 	cycle_t wd_last;
 #endif
 	struct module *owner;
-} ____cacheline_aligned;
+};
 
 /*
  * Clock source flags bits::

include/linux/sched_clock.h

@@ -10,11 +10,17 @@
 
 #ifdef CONFIG_GENERIC_SCHED_CLOCK
 extern void sched_clock_postinit(void);
-#else
-static inline void sched_clock_postinit(void) { }
-#endif
 
 extern void sched_clock_register(u64 (*read)(void), int bits,
 				 unsigned long rate);
+#else
+static inline void sched_clock_postinit(void) { }
+
+static inline void sched_clock_register(u64 (*read)(void), int bits,
+					unsigned long rate)
+{
+	;
+}
+#endif
 
 #endif

include/linux/time.h

@@ -125,6 +125,32 @@ static inline bool timeval_valid(const struct timeval *tv)
 
 extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
 
+/*
+ * Validates if a timespec/timeval used to inject a time offset is valid.
+ * Offsets can be postive or negative. The value of the timeval/timespec
+ * is the sum of its fields, but *NOTE*: the field tv_usec/tv_nsec must
+ * always be non-negative.
+ */
+static inline bool timeval_inject_offset_valid(const struct timeval *tv)
+{
+	/* We don't check the tv_sec as it can be positive or negative */
+
+	/* Can't have more microseconds then a second */
+	if (tv->tv_usec < 0 || tv->tv_usec >= USEC_PER_SEC)
+		return false;
+	return true;
+}
+
+static inline bool timespec_inject_offset_valid(const struct timespec *ts)
+{
+	/* We don't check the tv_sec as it can be positive or negative */
+
+	/* Can't have more nanoseconds then a second */
+	if (ts->tv_nsec < 0 || ts->tv_nsec >= NSEC_PER_SEC)
+		return false;
+	return true;
+}
+
 #define CURRENT_TIME		(current_kernel_time())
 #define CURRENT_TIME_SEC	((struct timespec) { get_seconds(), 0 })
 

kernel/time/alarmtimer.c

@@ -271,11 +271,27 @@ static int alarmtimer_suspend(struct device *dev)
 		__pm_wakeup_event(ws, MSEC_PER_SEC);
 	return ret;
 }
+
+static int alarmtimer_resume(struct device *dev)
+{
+	struct rtc_device *rtc;
+
+	rtc = alarmtimer_get_rtcdev();
+	if (rtc)
+		rtc_timer_cancel(rtc, &rtctimer);
+	return 0;
+}
+
 #else
 static int alarmtimer_suspend(struct device *dev)
 {
 	return 0;
 }
+
+static int alarmtimer_resume(struct device *dev)
+{
+	return 0;
+}
 #endif
 
 static void alarmtimer_freezerset(ktime_t absexp, enum alarmtimer_type type)
@@ -800,6 +816,7 @@ out:
 /* Suspend hook structures */
 static const struct dev_pm_ops alarmtimer_pm_ops = {
 	.suspend = alarmtimer_suspend,
+	.resume = alarmtimer_resume,
 };
 
 static struct platform_driver alarmtimer_driver = {

kernel/time/clocksource.c

@@ -218,8 +218,8 @@ static void clocksource_watchdog(unsigned long data)
 
 		/* Check the deviation from the watchdog clocksource. */
 		if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) {
-			pr_warn("timekeeping watchdog: Marking clocksource '%s' as unstable because the skew is too large:\n",
-				cs->name);
+			pr_warn("timekeeping watchdog on CPU%d: Marking clocksource '%s' as unstable because the skew is too large:\n",
+				smp_processor_id(), cs->name);
 			pr_warn("                      '%s' wd_now: %llx wd_last: %llx mask: %llx\n",
 				watchdog->name, wdnow, wdlast, watchdog->mask);
 			pr_warn("                      '%s' cs_now: %llx cs_last: %llx mask: %llx\n",

kernel/time/ntp.c

@@ -16,8 +16,11 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/rtc.h>
+#include <linux/math64.h>
 
 #include "ntp_internal.h"
+#include "timekeeping_internal.h"
+
 
 /*
  * NTP timekeeping variables:
@@ -70,7 +73,7 @@ static long			time_esterror = NTP_PHASE_LIMIT;
 static s64			time_freq;
 
 /* time at last adjustment (secs):					*/
-static long			time_reftime;
+static time64_t		time_reftime;
 
 static long			time_adjust;
 
@@ -297,25 +300,27 @@ static void ntp_update_offset(long offset)
 	if (!(time_status & STA_PLL))
 		return;
 
-	if (!(time_status & STA_NANO))
+	if (!(time_status & STA_NANO)) {
+		/* Make sure the multiplication below won't overflow */
+		offset = clamp(offset, -USEC_PER_SEC, USEC_PER_SEC);
 		offset *= NSEC_PER_USEC;
+	}
 
 	/*
 	 * Scale the phase adjustment and
 	 * clamp to the operating range.
 	 */
-	offset = min(offset, MAXPHASE);
-	offset = max(offset, -MAXPHASE);
+	offset = clamp(offset, -MAXPHASE, MAXPHASE);
 
 	/*
 	 * Select how the frequency is to be controlled
 	 * and in which mode (PLL or FLL).
 	 */
-	secs = get_seconds() - time_reftime;
+	secs = (long)(__ktime_get_real_seconds() - time_reftime);
 	if (unlikely(time_status & STA_FREQHOLD))
 		secs = 0;
 
-	time_reftime = get_seconds();
+	time_reftime = __ktime_get_real_seconds();
 
 	offset64    = offset;
 	freq_adj    = ntp_update_offset_fll(offset64, secs);
@@ -390,10 +395,11 @@ ktime_t ntp_get_next_leap(void)
  *
  * Also handles leap second processing, and returns leap offset
  */
-int second_overflow(unsigned long secs)
+int second_overflow(time64_t secs)
 {
 	s64 delta;
 	int leap = 0;
+	s32 rem;
 
 	/*
 	 * Leap second processing. If in leap-insert state at the end of the
@@ -404,19 +410,19 @@ int second_overflow(unsigned long secs)
 	case TIME_OK:
 		if (time_status & STA_INS) {
 			time_state = TIME_INS;
-			ntp_next_leap_sec = secs + SECS_PER_DAY -
-						(secs % SECS_PER_DAY);
+			div_s64_rem(secs, SECS_PER_DAY, &rem);
+			ntp_next_leap_sec = secs + SECS_PER_DAY - rem;
 		} else if (time_status & STA_DEL) {
 			time_state = TIME_DEL;
-			ntp_next_leap_sec = secs + SECS_PER_DAY -
-						 ((secs+1) % SECS_PER_DAY);
+			div_s64_rem(secs + 1, SECS_PER_DAY, &rem);
+			ntp_next_leap_sec = secs + SECS_PER_DAY - rem;
 		}
 		break;
 	case TIME_INS:
 		if (!(time_status & STA_INS)) {
 			ntp_next_leap_sec = TIME64_MAX;
 			time_state = TIME_OK;
-		} else if (secs % SECS_PER_DAY == 0) {
+		} else if (secs == ntp_next_leap_sec) {
 			leap = -1;
 			time_state = TIME_OOP;
 			printk(KERN_NOTICE
@@ -427,7 +433,7 @@ int second_overflow(unsigned long secs)
 		if (!(time_status & STA_DEL)) {
 			ntp_next_leap_sec = TIME64_MAX;
 			time_state = TIME_OK;
-		} else if ((secs + 1) % SECS_PER_DAY == 0) {
+		} else if (secs == ntp_next_leap_sec) {
 			leap = 1;
 			ntp_next_leap_sec = TIME64_MAX;
 			time_state = TIME_WAIT;
@@ -590,7 +596,7 @@ static inline void process_adj_status(struct timex *txc, struct timespec64 *ts)
 	 * reference time to current time.
 	 */
 	if (!(time_status & STA_PLL) && (txc->status & STA_PLL))
-		time_reftime = get_seconds();
+		time_reftime = __ktime_get_real_seconds();
 
 	/* only set allowed bits */
 	time_status &= STA_RONLY;
@@ -674,8 +680,14 @@ int ntp_validate_timex(struct timex *txc)
 			return -EINVAL;
 	}
 
-	if ((txc->modes & ADJ_SETOFFSET) && (!capable(CAP_SYS_TIME)))
-		return -EPERM;
+	if (txc->modes & ADJ_SETOFFSET) {
+		/* In order to inject time, you gotta be super-user! */
+		if (!capable(CAP_SYS_TIME))
+			return -EPERM;
+
+		if (!timeval_inject_offset_valid(&txc->time))
+			return -EINVAL;
+	}
 
 	/*
 	 * Check for potential multiplication overflows that can

kernel/time/ntp_internal.h

@@ -6,7 +6,7 @@ extern void ntp_clear(void);
 /* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
 extern u64 ntp_tick_length(void);
 extern ktime_t ntp_get_next_leap(void);
-extern int second_overflow(unsigned long secs);
+extern int second_overflow(time64_t secs);
 extern int ntp_validate_timex(struct timex *);
 extern int __do_adjtimex(struct timex *, struct timespec64 *, s32 *);
 extern void __hardpps(const struct timespec64 *, const struct timespec64 *);

kernel/time/posix-clock.c

@@ -69,10 +69,10 @@ static ssize_t posix_clock_read(struct file *fp, char __user *buf,
 static unsigned int posix_clock_poll(struct file *fp, poll_table *wait)
 {
 	struct posix_clock *clk = get_posix_clock(fp);
-	int result = 0;
+	unsigned int result = 0;
 
 	if (!clk)
-		return -ENODEV;
+		return POLLERR;
 
 	if (clk->ops.poll)
 		result = clk->ops.poll(clk, fp, wait);

kernel/time/tick-sched.c

@@ -603,15 +603,31 @@ static ktime_t tick_nohz_stop_sched_tick(struct tick_sched *ts,
 
 	/*
 	 * If the tick is due in the next period, keep it ticking or
-	 * restart it proper.
+	 * force prod the timer.
 	 */
 	delta = next_tick - basemono;
 	if (delta <= (u64)TICK_NSEC) {
 		tick.tv64 = 0;
+		/*
+		 * We've not stopped the tick yet, and there's a timer in the
+		 * next period, so no point in stopping it either, bail.
+		 */
 		if (!ts->tick_stopped)
 			goto out;
+
+		/*
+		 * If, OTOH, we did stop it, but there's a pending (expired)
+		 * timer reprogram the timer hardware to fire now.
+		 *
+		 * We will not restart the tick proper, just prod the timer
+		 * hardware into firing an interrupt to process the pending
+		 * timers. Just like tick_irq_exit() will not restart the tick
+		 * for 'normal' interrupts.
+		 *
+		 * Only once we exit the idle loop will we re-enable the tick,
+		 * see tick_nohz_idle_exit().
+		 */
 		if (delta == 0) {
-			/* Tick is stopped, but required now. Enforce it */
 			tick_nohz_restart(ts, now);
 			goto out;
 		}

kernel/time/timekeeping.c

@@ -305,8 +305,7 @@ static inline s64 timekeeping_get_ns(struct tk_read_base *tkr)
 
 	delta = timekeeping_get_delta(tkr);
 
-	nsec = delta * tkr->mult + tkr->xtime_nsec;
-	nsec >>= tkr->shift;
+	nsec = (delta * tkr->mult + tkr->xtime_nsec) >> tkr->shift;
 
 	/* If arch requires, add in get_arch_timeoffset() */
 	return nsec + arch_gettimeoffset();
@@ -846,6 +845,19 @@ time64_t ktime_get_real_seconds(void)
 }
 EXPORT_SYMBOL_GPL(ktime_get_real_seconds);
 
+/**
+ * __ktime_get_real_seconds - The same as ktime_get_real_seconds
+ * but without the sequence counter protect. This internal function
+ * is called just when timekeeping lock is already held.
+ */
+time64_t __ktime_get_real_seconds(void)
+{
+	struct timekeeper *tk = &tk_core.timekeeper;
+
+	return tk->xtime_sec;
+}
+
+
 #ifdef CONFIG_NTP_PPS
 
 /**
@@ -959,7 +971,7 @@ int timekeeping_inject_offset(struct timespec *ts)
 	struct timespec64 ts64, tmp;
 	int ret = 0;
 
-	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
+	if (!timespec_inject_offset_valid(ts))
 		return -EINVAL;
 
 	ts64 = timespec_to_timespec64(*ts);
@@ -1592,9 +1604,12 @@ static __always_inline void timekeeping_freqadjust(struct timekeeper *tk,
 {
 	s64 interval = tk->cycle_interval;
 	s64 xinterval = tk->xtime_interval;
+	u32 base = tk->tkr_mono.clock->mult;
+	u32 max = tk->tkr_mono.clock->maxadj;
+	u32 cur_adj = tk->tkr_mono.mult;
 	s64 tick_error;
 	bool negative;
-	u32 adj;
+	u32 adj_scale;
 
 	/* Remove any current error adj from freq calculation */
 	if (tk->ntp_err_mult)
@@ -1613,13 +1628,33 @@ static __always_inline void timekeeping_freqadjust(struct timekeeper *tk,
 	/* preserve the direction of correction */
 	negative = (tick_error < 0);
 
-	/* Sort out the magnitude of the correction */
+	/* If any adjustment would pass the max, just return */
+	if (negative && (cur_adj - 1) <= (base - max))
+		return;
+	if (!negative && (cur_adj + 1) >= (base + max))
+		return;
+	/*
+	 * Sort out the magnitude of the correction, but
+	 * avoid making so large a correction that we go
+	 * over the max adjustment.
+	 */
+	adj_scale = 0;
 	tick_error = abs(tick_error);
-	for (adj = 0; tick_error > interval; adj++)
+	while (tick_error > interval) {
+		u32 adj = 1 << (adj_scale + 1);
+
+		/* Check if adjustment gets us within 1 unit from the max */
+		if (negative && (cur_adj - adj) <= (base - max))
+			break;
+		if (!negative && (cur_adj + adj) >= (base + max))
+			break;
+
+		adj_scale++;
 		tick_error >>= 1;
+	}
 
 	/* scale the corrections */
-	timekeeping_apply_adjustment(tk, offset, negative, adj);
+	timekeeping_apply_adjustment(tk, offset, negative, adj_scale);
 }
 
 /*

kernel/time/timekeeping_internal.h

@@ -17,7 +17,11 @@ static inline cycle_t clocksource_delta(cycle_t now, cycle_t last, cycle_t mask)
 {
 	cycle_t ret = (now - last) & mask;
 
-	return (s64) ret > 0 ? ret : 0;
+	/*
+	 * Prevent time going backwards by checking the MSB of mask in
+	 * the result. If set, return 0.
+	 */
+	return ret & ~(mask >> 1) ? 0 : ret;
 }
 #else
 static inline cycle_t clocksource_delta(cycle_t now, cycle_t last, cycle_t mask)
@@ -26,4 +30,6 @@ static inline cycle_t clocksource_delta(cycle_t now, cycle_t last, cycle_t mask)
 }
 #endif
 
+extern time64_t __ktime_get_real_seconds(void);
+
 #endif /* _TIMEKEEPING_INTERNAL_H */

tools/testing/selftests/timers/clocksource-switch.c

@@ -97,7 +97,7 @@ int get_cur_clocksource(char *buf, size_t size)
 int change_clocksource(char *clocksource)
 {
 	int fd;
-	size_t size;
+	ssize_t size;
 
 	fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_WRONLY);