arm64: don't pull uaccess.h into *.S

Split asm-only parts of arm64 uaccess.h into a new header and use that
from *.S.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

arch/arm64/include/asm/asm-uaccess.h

@@ -0,0 +1,65 @@
+#ifndef __ASM_ASM_UACCESS_H
+#define __ASM_ASM_UACCESS_H
+
+#include <asm/alternative.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/sysreg.h>
+#include <asm/assembler.h>
+
+/*
+ * User access enabling/disabling macros.
+ */
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+	.macro	__uaccess_ttbr0_disable, tmp1
+	mrs	\tmp1, ttbr1_el1		// swapper_pg_dir
+	add	\tmp1, \tmp1, #SWAPPER_DIR_SIZE	// reserved_ttbr0 at the end of swapper_pg_dir
+	msr	ttbr0_el1, \tmp1		// set reserved TTBR0_EL1
+	isb
+	.endm
+
+	.macro	__uaccess_ttbr0_enable, tmp1
+	get_thread_info \tmp1
+	ldr	\tmp1, [\tmp1, #TSK_TI_TTBR0]	// load saved TTBR0_EL1
+	msr	ttbr0_el1, \tmp1		// set the non-PAN TTBR0_EL1
+	isb
+	.endm
+
+	.macro	uaccess_ttbr0_disable, tmp1
+alternative_if_not ARM64_HAS_PAN
+	__uaccess_ttbr0_disable \tmp1
+alternative_else_nop_endif
+	.endm
+
+	.macro	uaccess_ttbr0_enable, tmp1, tmp2
+alternative_if_not ARM64_HAS_PAN
+	save_and_disable_irq \tmp2		// avoid preemption
+	__uaccess_ttbr0_enable \tmp1
+	restore_irq \tmp2
+alternative_else_nop_endif
+	.endm
+#else
+	.macro	uaccess_ttbr0_disable, tmp1
+	.endm
+
+	.macro	uaccess_ttbr0_enable, tmp1, tmp2
+	.endm
+#endif
+
+/*
+ * These macros are no-ops when UAO is present.
+ */
+	.macro	uaccess_disable_not_uao, tmp1
+	uaccess_ttbr0_disable \tmp1
+alternative_if ARM64_ALT_PAN_NOT_UAO
+	SET_PSTATE_PAN(1)
+alternative_else_nop_endif
+	.endm
+
+	.macro	uaccess_enable_not_uao, tmp1, tmp2
+	uaccess_ttbr0_enable \tmp1, \tmp2
+alternative_if ARM64_ALT_PAN_NOT_UAO
+	SET_PSTATE_PAN(0)
+alternative_else_nop_endif
+	.endm
+
+#endif

arch/arm64/include/asm/uaccess.h

@@ -22,8 +22,6 @@
 #include <asm/kernel-pgtable.h>
 #include <asm/sysreg.h>
 
-#ifndef __ASSEMBLY__
-
 /*
  * User space memory access functions
  */
@@ -424,66 +422,4 @@ extern long strncpy_from_user(char *dest, const char __user *src, long count);
 extern __must_check long strlen_user(const char __user *str);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
-#else	/* __ASSEMBLY__ */
-
-#include <asm/assembler.h>
-
-/*
- * User access enabling/disabling macros.
- */
-#ifdef CONFIG_ARM64_SW_TTBR0_PAN
-	.macro	__uaccess_ttbr0_disable, tmp1
-	mrs	\tmp1, ttbr1_el1		// swapper_pg_dir
-	add	\tmp1, \tmp1, #SWAPPER_DIR_SIZE	// reserved_ttbr0 at the end of swapper_pg_dir
-	msr	ttbr0_el1, \tmp1		// set reserved TTBR0_EL1
-	isb
-	.endm
-
-	.macro	__uaccess_ttbr0_enable, tmp1
-	get_thread_info \tmp1
-	ldr	\tmp1, [\tmp1, #TSK_TI_TTBR0]	// load saved TTBR0_EL1
-	msr	ttbr0_el1, \tmp1		// set the non-PAN TTBR0_EL1
-	isb
-	.endm
-
-	.macro	uaccess_ttbr0_disable, tmp1
-alternative_if_not ARM64_HAS_PAN
-	__uaccess_ttbr0_disable \tmp1
-alternative_else_nop_endif
-	.endm
-
-	.macro	uaccess_ttbr0_enable, tmp1, tmp2
-alternative_if_not ARM64_HAS_PAN
-	save_and_disable_irq \tmp2		// avoid preemption
-	__uaccess_ttbr0_enable \tmp1
-	restore_irq \tmp2
-alternative_else_nop_endif
-	.endm
-#else
-	.macro	uaccess_ttbr0_disable, tmp1
-	.endm
-
-	.macro	uaccess_ttbr0_enable, tmp1, tmp2
-	.endm
-#endif
-
-/*
- * These macros are no-ops when UAO is present.
- */
-	.macro	uaccess_disable_not_uao, tmp1
-	uaccess_ttbr0_disable \tmp1
-alternative_if ARM64_ALT_PAN_NOT_UAO
-	SET_PSTATE_PAN(1)
-alternative_else_nop_endif
-	.endm
-
-	.macro	uaccess_enable_not_uao, tmp1, tmp2
-	uaccess_ttbr0_enable \tmp1, \tmp2
-alternative_if ARM64_ALT_PAN_NOT_UAO
-	SET_PSTATE_PAN(0)
-alternative_else_nop_endif
-	.endm
-
-#endif	/* __ASSEMBLY__ */
-
 #endif /* __ASM_UACCESS_H */

arch/arm64/kernel/entry.S

@@ -31,7 +31,7 @@
 #include <asm/memory.h>
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
 #include <asm/unistd.h>
 
 /*

arch/arm64/lib/clear_user.S

@@ -17,7 +17,7 @@
  */
 #include <linux/linkage.h>
 
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
 
 	.text
 

arch/arm64/lib/copy_from_user.S

@@ -17,7 +17,7 @@
 #include <linux/linkage.h>
 
 #include <asm/cache.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
 
 /*
  * Copy from user space to a kernel buffer (alignment handled by the hardware)

arch/arm64/lib/copy_in_user.S

@@ -19,7 +19,7 @@
 #include <linux/linkage.h>
 
 #include <asm/cache.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
 
 /*
  * Copy from user space to user space (alignment handled by the hardware)

arch/arm64/lib/copy_to_user.S

@@ -17,7 +17,7 @@
 #include <linux/linkage.h>
 
 #include <asm/cache.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
 
 /*
  * Copy to user space from a kernel buffer (alignment handled by the hardware)

arch/arm64/mm/cache.S

@@ -23,7 +23,7 @@
 #include <asm/assembler.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
 
 /*
  *	flush_icache_range(start,end)

arch/arm64/xen/hypercall.S

@@ -49,7 +49,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
 #include <xen/interface/xen.h>