Merge tag 'phy-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.2 merge window

*) new Broadcom SATA3 PHY driver for Broadcom STB SoCs
*) new phy API to get PHY by index which is used in EHCI and
   OHCI controller drivers
*) support specifying supply at port level used for multi-port PHYs
*) sparse warning fixes in miphy PHYs
*) fix pm_runtime issues in twl4030 driver

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Documentation/ABI/testing/sysfs-platform-twl4030-usb

@@ -0,0 +1,8 @@
+What: /sys/bus/platform/devices/*twl4030-usb/vbus
+Description:
+	Read-only status reporting if VBUS (approx 5V)
+	is being supplied by the USB bus.
+
+	Possible values: "on", "off".
+
+	Changes are notified via select/poll.

Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt

@@ -0,0 +1,40 @@
+* Broadcom SATA3 PHY for STB
+
+Required properties:
+- compatible: should be one or more of
+     "brcm,bcm7445-sata-phy"
+     "brcm,phy-sata3"
+- address-cells: should be 1
+- size-cells: should be 0
+- reg: register range for the PHY PCB interface
+- reg-names: should be "phy"
+
+Sub-nodes:
+  Each port's PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+- phy-cells: generic PHY binding; must be 0
+Optional:
+- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+
+
+Example:
+
+	sata-phy@f0458100 {
+		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
+		reg-names = "phy";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata-phy@0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		sata-phy@1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+	};

Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt

@@ -6,6 +6,7 @@ This file provides information on what the device node for the R-Car generation
 Required properties:
 - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
+	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
 - reg: offset and length of the register block.
 - #address-cells: number of address cells for the USB channel subnodes, must
 		  be <1>.

Documentation/phy.txt

@@ -76,6 +76,8 @@ struct phy *phy_get(struct device *dev, const char *string);
 struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+				     int index);
 
 phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
 be used to get the PHY. In the case of dt boot, the string arguments
@@ -86,7 +88,10 @@ successful PHY get. On driver detach, release function is invoked on
 the the devres data and devres data is freed. phy_optional_get and
 devm_phy_optional_get should be used when the phy is optional. These
 two functions will never return -ENODEV, but instead returns NULL when
-the phy cannot be found.
+the phy cannot be found.Some generic drivers, such as ehci, may use multiple
+phys and for such drivers referencing phy(s) by name(s) does not make sense. In
+this case, devm_of_phy_get_by_index can be used to get a phy reference based on
+the index.
 
 It should be noted that NULL is a valid phy reference. All phy
 consumer calls on the NULL phy become NOPs. That is the release calls,

drivers/phy/Kconfig

@@ -316,4 +316,13 @@ config PHY_TUSB1210
 	help
 	  Support for TI TUSB1210 USB ULPI PHY.
 
+config PHY_BRCMSTB_SATA
+	tristate "Broadcom STB SATA PHY driver"
+	depends on ARCH_BRCMSTB
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
+	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
+
 endmenu

drivers/phy/Makefile

@@ -41,3 +41,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-20nm.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
 obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
+obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o

drivers/phy/phy-brcmstb-sata.c

@@ -0,0 +1,216 @@
+/*
+ * Broadcom SATA3 AHCI Controller PHY Driver
+ *
+ * Copyright © 2009-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define SATA_MDIO_BANK_OFFSET				0x23c
+#define SATA_MDIO_REG_OFFSET(ofs)			((ofs) * 4)
+#define SATA_MDIO_REG_SPACE_SIZE			0x1000
+#define SATA_MDIO_REG_LENGTH				0x1f00
+
+#define MAX_PORTS					2
+
+/* Register offset between PHYs in PCB space */
+#define SATA_MDIO_REG_SPACE_SIZE			0x1000
+
+struct brcm_sata_port {
+	int portnum;
+	struct phy *phy;
+	struct brcm_sata_phy *phy_priv;
+	bool ssc_en;
+};
+
+struct brcm_sata_phy {
+	struct device *dev;
+	void __iomem *phy_base;
+
+	struct brcm_sata_port phys[MAX_PORTS];
+};
+
+enum sata_mdio_phy_regs_28nm {
+	PLL_REG_BANK_0				= 0x50,
+	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
+
+	TXPMD_REG_BANK				= 0x1a0,
+	TXPMD_CONTROL1				= 0x81,
+	TXPMD_CONTROL1_TX_SSC_EN_FRC		= BIT(0),
+	TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL	= BIT(1),
+	TXPMD_TX_FREQ_CTRL_CONTROL1		= 0x82,
+	TXPMD_TX_FREQ_CTRL_CONTROL2		= 0x83,
+	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
+	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
+	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
+};
+
+static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
+{
+	struct brcm_sata_phy *priv = port->phy_priv;
+
+	return priv->phy_base + (port->portnum * SATA_MDIO_REG_SPACE_SIZE);
+}
+
+static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
+			      u32 msk, u32 value)
+{
+	u32 tmp;
+
+	writel(bank, addr + SATA_MDIO_BANK_OFFSET);
+	tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
+	tmp = (tmp & msk) | value;
+	writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
+}
+
+/* These defaults were characterized by H/W group */
+#define FMIN_VAL_DEFAULT	0x3df
+#define FMAX_VAL_DEFAULT	0x3df
+#define FMAX_VAL_SSC		0x83
+
+static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
+{
+	void __iomem *base = brcm_sata_phy_base(port);
+	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 tmp;
+
+	/* override the TX spread spectrum setting */
+	tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
+	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
+
+	/* set fixed min freq */
+	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
+			  ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
+			  FMIN_VAL_DEFAULT);
+
+	/* set fixed max freq depending on SSC config */
+	if (port->ssc_en) {
+		dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
+		tmp = FMAX_VAL_SSC;
+	} else {
+		tmp = FMAX_VAL_DEFAULT;
+	}
+
+	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
+			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
+}
+
+static int brcm_sata_phy_init(struct phy *phy)
+{
+	struct brcm_sata_port *port = phy_get_drvdata(phy);
+
+	brcm_sata_cfg_ssc_28nm(port);
+
+	return 0;
+}
+
+static struct phy_ops phy_ops_28nm = {
+	.init		= brcm_sata_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id brcm_sata_phy_of_match[] = {
+	{ .compatible	= "brcm,bcm7445-sata-phy" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
+
+static int brcm_sata_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node, *child;
+	struct brcm_sata_phy *priv;
+	struct resource *res;
+	struct phy_provider *provider;
+	int count = 0;
+
+	if (of_get_child_count(dn) == 0)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	dev_set_drvdata(dev, priv);
+	priv->dev = dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+	priv->phy_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->phy_base))
+		return PTR_ERR(priv->phy_base);
+
+	for_each_available_child_of_node(dn, child) {
+		unsigned int id;
+		struct brcm_sata_port *port;
+
+		if (of_property_read_u32(child, "reg", &id)) {
+			dev_err(dev, "missing reg property in node %s\n",
+					child->name);
+			return -EINVAL;
+		}
+
+		if (id >= MAX_PORTS) {
+			dev_err(dev, "invalid reg: %u\n", id);
+			return -EINVAL;
+		}
+		if (priv->phys[id].phy) {
+			dev_err(dev, "already registered port %u\n", id);
+			return -EINVAL;
+		}
+
+		port = &priv->phys[id];
+		port->portnum = id;
+		port->phy_priv = priv;
+		port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
+		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
+		if (IS_ERR(port->phy)) {
+			dev_err(dev, "failed to create PHY\n");
+			return PTR_ERR(port->phy);
+		}
+
+		phy_set_drvdata(port->phy, port);
+		count++;
+	}
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "could not register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_info(dev, "registered %d port(s)\n", count);
+
+	return 0;
+}
+
+static struct platform_driver brcm_sata_phy_driver = {
+	.probe	= brcm_sata_phy_probe,
+	.driver	= {
+		.of_match_table	= brcm_sata_phy_of_match,
+		.name		= "brcmstb-sata-phy",
+	}
+};
+module_platform_driver(brcm_sata_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom STB SATA PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marc Carino");
+MODULE_AUTHOR("Brian Norris");
+MODULE_ALIAS("platform:phy-brcmstb-sata");

drivers/phy/phy-core.c

@@ -367,13 +367,21 @@ static struct phy *_of_phy_get(struct device_node *np, int index)
 	phy_provider = of_phy_provider_lookup(args.np);
 	if (IS_ERR(phy_provider) || !try_module_get(phy_provider->owner)) {
 		phy = ERR_PTR(-EPROBE_DEFER);
-		goto err0;
+		goto out_unlock;
+	}
+
+	if (!of_device_is_available(args.np)) {
+		dev_warn(phy_provider->dev, "Requested PHY is disabled\n");
+		phy = ERR_PTR(-ENODEV);
+		goto out_put_module;
 	}
 
 	phy = phy_provider->of_xlate(phy_provider->dev, &args);
+
+out_put_module:
 	module_put(phy_provider->owner);
 
-err0:
+out_unlock:
 	mutex_unlock(&phy_provider_mutex);
 	of_node_put(args.np);
 
@@ -622,6 +630,38 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
 }
 EXPORT_SYMBOL_GPL(devm_of_phy_get);
 
+/**
+ * devm_of_phy_get_by_index() - lookup and obtain a reference to a phy by index.
+ * @dev: device that requests this phy
+ * @np: node containing the phy
+ * @index: index of the phy
+ *
+ * Gets the phy using _of_phy_get(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ */
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+				     int index)
+{
+	struct phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	phy = _of_phy_get(np, index);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_of_phy_get_by_index);
+
 /**
  * phy_create() - create a new phy
  * @dev: device that is creating the new phy
@@ -651,16 +691,6 @@ struct phy *phy_create(struct device *dev, struct device_node *node,
 		goto free_phy;
 	}
 
-	/* phy-supply */
-	phy->pwr = regulator_get_optional(dev, "phy");
-	if (IS_ERR(phy->pwr)) {
-		if (PTR_ERR(phy->pwr) == -EPROBE_DEFER) {
-			ret = -EPROBE_DEFER;
-			goto free_ida;
-		}
-		phy->pwr = NULL;
-	}
-
 	device_initialize(&phy->dev);
 	mutex_init(&phy->mutex);
 
@@ -674,6 +704,16 @@ struct phy *phy_create(struct device *dev, struct device_node *node,
 	if (ret)
 		goto put_dev;
 
+	/* phy-supply */
+	phy->pwr = regulator_get_optional(&phy->dev, "phy");
+	if (IS_ERR(phy->pwr)) {
+		ret = PTR_ERR(phy->pwr);
+		if (ret == -EPROBE_DEFER)
+			goto put_dev;
+
+		phy->pwr = NULL;
+	}
+
 	ret = device_add(&phy->dev);
 	if (ret)
 		goto put_dev;
@@ -689,9 +729,6 @@ put_dev:
 	put_device(&phy->dev);  /* calls phy_release() which frees resources */
 	return ERR_PTR(ret);
 
-free_ida:
-	ida_simple_remove(&phy_ida, phy->id);
-
 free_phy:
 	kfree(phy);
 	return ERR_PTR(ret);

drivers/phy/phy-miphy28lp.c

@@ -367,7 +367,7 @@ static struct miphy28lp_pll_gen pcie_pll_gen[] = {
 
 static inline void miphy28lp_set_reset(struct miphy28lp_phy *miphy_phy)
 {
-	void *base = miphy_phy->base;
+	void __iomem *base = miphy_phy->base;
 	u8 val;
 
 	/* Putting Macro in reset */
@@ -391,7 +391,7 @@ static inline void miphy28lp_set_reset(struct miphy28lp_phy *miphy_phy)
 static inline void miphy28lp_pll_calibration(struct miphy28lp_phy *miphy_phy,
 		struct pll_ratio *pll_ratio)
 {
-	void *base = miphy_phy->base;
+	void __iomem *base = miphy_phy->base;
 	u8 val;
 
 	/* Applying PLL Settings */
@@ -1107,11 +1107,6 @@ static struct phy *miphy28lp_xlate(struct device *dev,
 	struct device_node *phynode = args->np;
 	int ret, index = 0;
 
-	if (!of_device_is_available(phynode)) {
-		dev_warn(dev, "Requested PHY is disabled\n");
-		return ERR_PTR(-ENODEV);
-	}
-
 	if (args->args_count != 1) {
 		dev_err(dev, "Invalid number of cells in 'phy' property\n");
 		return ERR_PTR(-EINVAL);

drivers/phy/phy-miphy365x.c

@@ -441,8 +441,8 @@ static int miphy365x_init(struct phy *phy)
 	return ret;
 }
 
-int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
-		       int index)
+static int miphy365x_get_addr(struct device *dev,
+		struct miphy365x_phy *miphy_phy, int index)
 {
 	struct device_node *phynode = miphy_phy->phy->dev.of_node;
 	const char *name;
@@ -476,11 +476,6 @@ static struct phy *miphy365x_xlate(struct device *dev,
 	struct device_node *phynode = args->np;
 	int ret, index;
 
-	if (!of_device_is_available(phynode)) {
-		dev_warn(dev, "Requested PHY is disabled\n");
-		return ERR_PTR(-ENODEV);
-	}
-
 	if (args->args_count != 1) {
 		dev_err(dev, "Invalid number of cells in 'phy' property\n");
 		return ERR_PTR(-EINVAL);

drivers/phy/phy-rcar-gen2.c

@@ -195,6 +195,7 @@ static struct phy_ops rcar_gen2_phy_ops = {
 static const struct of_device_id rcar_gen2_phy_match_table[] = {
 	{ .compatible = "renesas,usb-phy-r8a7790" },
 	{ .compatible = "renesas,usb-phy-r8a7791" },
+	{ .compatible = "renesas,usb-phy-r8a7794" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
@@ -206,11 +207,6 @@ static struct phy *rcar_gen2_phy_xlate(struct device *dev,
 	struct device_node *np = args->np;
 	int i;
 
-	if (!of_device_is_available(np)) {
-		dev_warn(dev, "Requested PHY is disabled\n");
-		return ERR_PTR(-ENODEV);
-	}
-
 	drv = dev_get_drvdata(dev);
 	if (!drv)
 		return ERR_PTR(-EINVAL);

drivers/phy/phy-twl4030-usb.c

@@ -144,6 +144,16 @@
 #define PMBR1				0x0D
 #define GPIO_USB_4PIN_ULPI_2430C	(3 << 0)
 
+/*
+ * If VBUS is valid or ID is ground, then we know a
+ * cable is present and we need to be runtime-enabled
+ */
+static inline bool cable_present(enum omap_musb_vbus_id_status stat)
+{
+	return stat == OMAP_MUSB_VBUS_VALID ||
+		stat == OMAP_MUSB_ID_GROUND;
+}
+
 struct twl4030_usb {
 	struct usb_phy		phy;
 	struct device		*dev;
@@ -386,8 +396,6 @@ static int twl4030_usb_runtime_suspend(struct device *dev)
 	struct twl4030_usb *twl = dev_get_drvdata(dev);
 
 	dev_dbg(twl->dev, "%s\n", __func__);
-	if (pm_runtime_suspended(dev))
-		return 0;
 
 	__twl4030_phy_power(twl, 0);
 	regulator_disable(twl->usb1v5);
@@ -403,8 +411,6 @@ static int twl4030_usb_runtime_resume(struct device *dev)
 	int res;
 
 	dev_dbg(twl->dev, "%s\n", __func__);
-	if (pm_runtime_active(dev))
-		return 0;
 
 	res = regulator_enable(twl->usb3v1);
 	if (res)
@@ -536,8 +542,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 
 	mutex_lock(&twl->lock);
 	if (status >= 0 && status != twl->linkstat) {
+		status_changed =
+			cable_present(twl->linkstat) !=
+			cable_present(status);
 		twl->linkstat = status;
-		status_changed = true;
 	}
 	mutex_unlock(&twl->lock);
 
@@ -553,15 +561,11 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 		 * USB_LINK_VBUS state.  musb_hdrc won't care until it
 		 * starts to handle softconnect right.
 		 */
-		if ((status == OMAP_MUSB_VBUS_VALID) ||
-		    (status == OMAP_MUSB_ID_GROUND)) {
-			if (pm_runtime_suspended(twl->dev))
-				pm_runtime_get_sync(twl->dev);
+		if (cable_present(status)) {
+			pm_runtime_get_sync(twl->dev);
 		} else {
-			if (pm_runtime_active(twl->dev)) {
-				pm_runtime_mark_last_busy(twl->dev);
-				pm_runtime_put_autosuspend(twl->dev);
-			}
+			pm_runtime_mark_last_busy(twl->dev);
+			pm_runtime_put_autosuspend(twl->dev);
 		}
 		omap_musb_mailbox(status);
 	}
@@ -711,7 +715,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
 
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
@@ -767,6 +770,9 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 
 	/* disable complete OTG block */
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
+
+	if (cable_present(twl->linkstat))
+		pm_runtime_put_noidle(twl->dev);
 	pm_runtime_mark_last_busy(twl->dev);
 	pm_runtime_put(twl->dev);
 

drivers/usb/host/ehci-platform.c

@@ -88,15 +88,13 @@ static int ehci_platform_power_on(struct platform_device *dev)
 	}
 
 	for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
-		if (priv->phys[phy_num]) {
-			ret = phy_init(priv->phys[phy_num]);
-			if (ret)
-				goto err_exit_phy;
-			ret = phy_power_on(priv->phys[phy_num]);
-			if (ret) {
-				phy_exit(priv->phys[phy_num]);
-				goto err_exit_phy;
-			}
+		ret = phy_init(priv->phys[phy_num]);
+		if (ret)
+			goto err_exit_phy;
+		ret = phy_power_on(priv->phys[phy_num]);
+		if (ret) {
+			phy_exit(priv->phys[phy_num]);
+			goto err_exit_phy;
 		}
 	}
 
@@ -104,10 +102,8 @@ static int ehci_platform_power_on(struct platform_device *dev)
 
 err_exit_phy:
 	while (--phy_num >= 0) {
-		if (priv->phys[phy_num]) {
-			phy_power_off(priv->phys[phy_num]);
-			phy_exit(priv->phys[phy_num]);
-		}
+		phy_power_off(priv->phys[phy_num]);
+		phy_exit(priv->phys[phy_num]);
 	}
 err_disable_clks:
 	while (--clk >= 0)
@@ -123,10 +119,8 @@ static void ehci_platform_power_off(struct platform_device *dev)
 	int clk, phy_num;
 
 	for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
-		if (priv->phys[phy_num]) {
-			phy_power_off(priv->phys[phy_num]);
-			phy_exit(priv->phys[phy_num]);
-		}
+		phy_power_off(priv->phys[phy_num]);
+		phy_exit(priv->phys[phy_num]);
 	}
 
 	for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
@@ -154,7 +148,6 @@ static int ehci_platform_probe(struct platform_device *dev)
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv;
 	struct ehci_hcd *ehci;
-	const char *phy_name;
 	int err, irq, phy_num, clk = 0;
 
 	if (usb_disabled())
@@ -208,36 +201,22 @@ static int ehci_platform_probe(struct platform_device *dev)
 
 		priv->num_phys = of_count_phandle_with_args(dev->dev.of_node,
 				"phys", "#phy-cells");
-		priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1;
 
-		priv->phys = devm_kcalloc(&dev->dev, priv->num_phys,
-				sizeof(struct phy *), GFP_KERNEL);
-		if (!priv->phys)
-			return -ENOMEM;
+		if (priv->num_phys > 0) {
+			priv->phys = devm_kcalloc(&dev->dev, priv->num_phys,
+					    sizeof(struct phy *), GFP_KERNEL);
+			if (!priv->phys)
+				return -ENOMEM;
+		} else
+			priv->num_phys = 0;
 
 		for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
-				err = of_property_read_string_index(
-						dev->dev.of_node,
-						"phy-names", phy_num,
-						&phy_name);
-
-				if (err < 0) {
-					if (priv->num_phys > 1) {
-						dev_err(&dev->dev, "phy-names not provided");
-						goto err_put_hcd;
-					} else
-						phy_name = "usb";
-				}
-
-				priv->phys[phy_num] = devm_phy_get(&dev->dev,
-						phy_name);
-				if (IS_ERR(priv->phys[phy_num])) {
-					err = PTR_ERR(priv->phys[phy_num]);
-					if ((priv->num_phys > 1) ||
-					    (err == -EPROBE_DEFER))
-						goto err_put_hcd;
-					priv->phys[phy_num] = NULL;
-				}
+			priv->phys[phy_num] = devm_of_phy_get_by_index(
+					&dev->dev, dev->dev.of_node, phy_num);
+			if (IS_ERR(priv->phys[phy_num])) {
+				err = PTR_ERR(priv->phys[phy_num]);
+					goto err_put_hcd;
+			}
 		}
 
 		for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {

drivers/usb/host/ohci-platform.c

@@ -57,15 +57,13 @@ static int ohci_platform_power_on(struct platform_device *dev)
 	}
 
 	for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
-		if (priv->phys[phy_num]) {
-			ret = phy_init(priv->phys[phy_num]);
-			if (ret)
-				goto err_exit_phy;
-			ret = phy_power_on(priv->phys[phy_num]);
-			if (ret) {
-				phy_exit(priv->phys[phy_num]);
-				goto err_exit_phy;
-			}
+		ret = phy_init(priv->phys[phy_num]);
+		if (ret)
+			goto err_exit_phy;
+		ret = phy_power_on(priv->phys[phy_num]);
+		if (ret) {
+			phy_exit(priv->phys[phy_num]);
+			goto err_exit_phy;
 		}
 	}
 
@@ -73,10 +71,8 @@ static int ohci_platform_power_on(struct platform_device *dev)
 
 err_exit_phy:
 	while (--phy_num >= 0) {
-		if (priv->phys[phy_num]) {
-			phy_power_off(priv->phys[phy_num]);
-			phy_exit(priv->phys[phy_num]);
-		}
+		phy_power_off(priv->phys[phy_num]);
+		phy_exit(priv->phys[phy_num]);
 	}
 err_disable_clks:
 	while (--clk >= 0)
@@ -92,10 +88,8 @@ static void ohci_platform_power_off(struct platform_device *dev)
 	int clk, phy_num;
 
 	for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
-		if (priv->phys[phy_num]) {
-			phy_power_off(priv->phys[phy_num]);
-			phy_exit(priv->phys[phy_num]);
-		}
+		phy_power_off(priv->phys[phy_num]);
+		phy_exit(priv->phys[phy_num]);
 	}
 
 	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
@@ -123,7 +117,6 @@ static int ohci_platform_probe(struct platform_device *dev)
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv;
 	struct ohci_hcd *ohci;
-	const char *phy_name;
 	int err, irq, phy_num, clk = 0;
 
 	if (usb_disabled())
@@ -174,36 +167,22 @@ static int ohci_platform_probe(struct platform_device *dev)
 
 		priv->num_phys = of_count_phandle_with_args(dev->dev.of_node,
 				"phys", "#phy-cells");
-		priv->num_phys = priv->num_phys > 0 ? priv->num_phys : 1;
 
-		priv->phys = devm_kcalloc(&dev->dev, priv->num_phys,
-				sizeof(struct phy *), GFP_KERNEL);
-		if (!priv->phys)
-			return -ENOMEM;
+		if (priv->num_phys > 0) {
+			priv->phys = devm_kcalloc(&dev->dev, priv->num_phys,
+					    sizeof(struct phy *), GFP_KERNEL);
+			if (!priv->phys)
+				return -ENOMEM;
+		} else
+			priv->num_phys = 0;
 
 		for (phy_num = 0; phy_num < priv->num_phys; phy_num++) {
-				err = of_property_read_string_index(
-						dev->dev.of_node,
-						"phy-names", phy_num,
-						&phy_name);
-
-				if (err < 0) {
-					if (priv->num_phys > 1) {
-						dev_err(&dev->dev, "phy-names not provided");
-						goto err_put_hcd;
-					} else
-						phy_name = "usb";
-				}
-
-				priv->phys[phy_num] = devm_phy_get(&dev->dev,
-						phy_name);
-				if (IS_ERR(priv->phys[phy_num])) {
-					err = PTR_ERR(priv->phys[phy_num]);
-					if ((priv->num_phys > 1) ||
-					    (err == -EPROBE_DEFER))
-						goto err_put_hcd;
-					priv->phys[phy_num] = NULL;
-				}
+			priv->phys[phy_num] = devm_of_phy_get_by_index(
+					&dev->dev, dev->dev.of_node, phy_num);
+			if (IS_ERR(priv->phys[phy_num])) {
+				err = PTR_ERR(priv->phys[phy_num]);
+				goto err_put_hcd;
+			}
 		}
 
 		for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {

include/linux/phy/phy.h

@@ -133,6 +133,8 @@ struct phy *devm_phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
 			    const char *con_id);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+				     int index);
 void phy_put(struct phy *phy);
 void devm_phy_put(struct device *dev, struct phy *phy);
 struct phy *of_phy_get(struct device_node *np, const char *con_id);
@@ -261,6 +263,13 @@ static inline struct phy *devm_of_phy_get(struct device *dev,
 	return ERR_PTR(-ENOSYS);
 }
 
+static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
+						   struct device_node *np,
+						   int index)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
 static inline void phy_put(struct phy *phy)
 {
 }