pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM

The code has been rewritten to remove "generic" calls to
imx_pwm_{enable|disable|config}.

Such approach would facilitate switch to atomic PWM (a.k.a ->apply())
implementation.

Suggested-by: Stefan Agner <stefan@agner.ch>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

drivers/pwm/pwm-imx.c

@@ -90,19 +90,33 @@ static int imx_pwm_config_v1(struct pwm_chip *chip,
 	return 0;
 }
 
-static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
+static int imx_pwm_enable_v1(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_per);
+	if (ret < 0)
+		return ret;
 
 	val = readl(imx->mmio_base + MX1_PWMC);
+	val |= MX1_PWMC_EN;
+	writel(val, imx->mmio_base + MX1_PWMC);
 
-	if (enable)
-		val |= MX1_PWMC_EN;
-	else
-		val &= ~MX1_PWMC_EN;
+	return 0;
+}
+
+static void imx_pwm_disable_v1(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
 
+	val = readl(imx->mmio_base + MX1_PWMC);
+	val &= ~MX1_PWMC_EN;
 	writel(val, imx->mmio_base + MX1_PWMC);
+
+	clk_disable_unprepare(imx->clk_per);
 }
 
 static int imx_pwm_config_v2(struct pwm_chip *chip,
@@ -240,9 +254,9 @@ static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 }
 
 static const struct pwm_ops imx_pwm_ops_v1 = {
-	.enable = imx_pwm_enable,
-	.disable = imx_pwm_disable,
-	.config = imx_pwm_config,
+	.enable = imx_pwm_enable_v1,
+	.disable = imx_pwm_disable_v1,
+	.config = imx_pwm_config_v1,
 	.owner = THIS_MODULE,
 };
 
@@ -261,8 +275,6 @@ struct imx_pwm_data {
 };
 
 static struct imx_pwm_data imx_pwm_data_v1 = {
-	.config = imx_pwm_config_v1,
-	.set_enable = imx_pwm_set_enable_v1,
 	.ops = &imx_pwm_ops_v1,
 };