Revert "PCI: imx6: Add support for active-low reset GPIO"

Commit 5c5fb40de8f1 ("PCI: imx6: Add support for active-low reset GPIO")
cause regressions on some boards like MX6 Gateworks Ventana, for example.

The reason for the breakage is that this commit sets the GPIO polarity in
the wrong logic level.

Also, the commit log is wrong because active-low reset GPIO is what the
driver used to support since the beginning.

So keep the old behavior that ignores the GPIO polarity specified in the
device tree and treat the PCI reset GPIO as active-low.

Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Tested-by: Tim Harvey <tharvey@gateworks.com>	# Gateworks Ventana
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
CC: stable@vger.kernel.org	# v4.5+

drivers/pci/host/pci-imx6.c

@@ -32,7 +32,7 @@
 #define to_imx6_pcie(x)	container_of(x, struct imx6_pcie, pp)
 
 struct imx6_pcie {
-	struct gpio_desc	*reset_gpio;
+	int			reset_gpio;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
 	struct clk		*pcie;
@@ -309,10 +309,10 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
 	usleep_range(200, 500);
 
 	/* Some boards don't have PCIe reset GPIO. */
-	if (imx6_pcie->reset_gpio) {
-		gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 0);
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0);
 		msleep(100);
-		gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1);
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
 	}
 	return 0;
 
@@ -523,6 +523,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct imx6_pcie *imx6_pcie;
 	struct pcie_port *pp;
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *dbi_base;
 	struct device_node *node = pdev->dev.of_node;
 	int ret;
@@ -544,8 +545,15 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(pp->dbi_base);
 
 	/* Fetch GPIOs */
-	imx6_pcie->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
-							GPIOD_OUT_LOW);
+	imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio,
+					    GPIOF_OUT_INIT_LOW, "PCIe reset");
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get reset gpio\n");
+			return ret;
+		}
+	}
 
 	/* Fetch clocks */
 	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");