Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "1st Round of Samsung DT updates for v3.19" from Kukjin Kim:

Samsung DT updates for v3.19

- add CPU nodes for exynos4210, exynos4212, exynos4412

- exynos4x12-pinctrl: add utility macro to define pin sleep states
- exynos4412-trats2: add Maxim77693 PMIC node, add sleep mode pin
  configuration and keep eMMC regulators soft-disabled

- add new exynos5250-spring DT

- cleanup exynos5250-arndale, exynos5250-smdk5250 and exynos5250-snow

- exynos5250-arndale: fix apparent GPIO typo and simplify USB3503
- exynos5250-snow and exynos Peach boards: add rtc_src clock for RTC

- correct mmc0 capability string exynos5420-peach-pit and exynos5800-
  peach-pi

- exynos3250: add MFC codec nodes

- s3c64xx: enable PWM node by default

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add CPU nodes for Exynos4 SoCs
  ARM: dts: add MFC codec device node for exynos3250
  ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2
  ARM: dts: Add sleep mode pin configuration for exynos4412-trats2
  ARM: dts: Add utility macro to define pin sleep states for exynos4x12-pinctrl
  ARM: dts: Keep eMMC regulators soft-disabled for exynos4412-trats2
  ARM: dts: correct the mmc0 capability string for exynos Peach boards
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards
  ARM: dts: Enable PWM node by default for s3c64xx
  ARM: dts: Add exynos5250-spring device tree
  ARM: dts: Simplify USB3503 on exynos5250-arndale
  ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
  ARM: dts: Clean up exynos5250-arndale
  ARM: dts: Clean up exynos5250-smdk5250
  ARM: dts: Fill in bootargs for exynos5250-snow
  ARM: dts: Clean up exynos5250-snow
  ARM: dts: Prepare node labels for exynos5250

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \

arch/arm/boot/dts/exynos3250.dtsi

@@ -320,6 +320,16 @@
 			status = "disabled";
 		};
 
+		mfc: codec@13400000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x13400000 0x10000>;
+			interrupts = <0 102 0>;
+			clock-names = "mfc", "sclk_mfc";
+			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
+			samsung,power-domain = <&pd_mfc>;
+			status = "disabled";
+		};
+
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;

arch/arm/boot/dts/exynos4210.dtsi

@@ -31,6 +31,23 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@900 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x900>;
+		};
+
+		cpu@901 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x901>;
+		};
+	};
+
 	pmu_system_controller: system-controller@10020000 {
 		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 				"clkout4", "clkout8", "clkout9";

arch/arm/boot/dts/exynos4212.dtsi

@@ -22,6 +22,23 @@
 / {
 	compatible = "samsung,exynos4212", "samsung,exynos4";
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@A00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA00>;
+		};
+
+		cpu@A01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA01>;
+		};
+	};
+
 	combiner: interrupt-controller@10440000 {
 		samsung,combiner-nr = <18>;
 	};

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
@@ -22,6 +23,7 @@
 	aliases {
 		i2c9 = &i2c_ak8975;
 		i2c10 = &i2c_cm36651;
+		i2c11 = &i2c_max77693;
 	};
 
 	memory {
@@ -399,8 +401,6 @@
 					regulator-name = "VMEM_VDD_2.8V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-mem-off;
 				};
 
 				ldo23_reg: ldo23 {
@@ -503,8 +503,6 @@
 					regulator-name = "VMEM_VDDF_3.0V";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-					regulator-mem-off;
 				};
 
 				buck9_reg: buck9 {
@@ -518,6 +516,36 @@
 		};
 	};
 
+	i2c_max77693: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max77693@66 {
+			compatible = "maxim,max77693";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 2>;
+			reg = <0x66>;
+
+			regulators {
+				esafeout1_reg: ESAFEOUT1@1 {
+					regulator-name = "ESAFEOUT1";
+				};
+				esafeout2_reg: ESAFEOUT2@2 {
+					regulator-name = "ESAFEOUT2";
+				};
+				charger_reg: CHARGER@0 {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <60000>;
+					regulator-max-microamp = <2580000>;
+				};
+			};
+		};
+	};
+
 	mmc@12550000 {
 		num-slots = <1>;
 		broken-cd;
@@ -782,3 +810,319 @@
 		io-channels = <&adc 2>;  /* Battery temperature */
 	};
 };
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-states {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, NONE);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, UP);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, UP);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, NONE);
+		PIN_SLP(gpc1-1, PREV, NONE);
+		PIN_SLP(gpc1-2, INPUT, NONE);
+		PIN_SLP(gpc1-3, INPUT, NONE);
+		PIN_SLP(gpc1-4, INPUT, NONE);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, INPUT, NONE);
+		PIN_SLP(gpf0-1, INPUT, NONE);
+		PIN_SLP(gpf0-2, INPUT, DOWN);
+		PIN_SLP(gpf0-3, INPUT, DOWN);
+		PIN_SLP(gpf0-4, INPUT, NONE);
+		PIN_SLP(gpf0-5, INPUT, DOWN);
+		PIN_SLP(gpf0-6, INPUT, NONE);
+		PIN_SLP(gpf0-7, INPUT, DOWN);
+
+		PIN_SLP(gpf1-0, INPUT, DOWN);
+		PIN_SLP(gpf1-1, INPUT, DOWN);
+		PIN_SLP(gpf1-2, INPUT, DOWN);
+		PIN_SLP(gpf1-3, INPUT, DOWN);
+		PIN_SLP(gpf1-4, INPUT, NONE);
+		PIN_SLP(gpf1-5, INPUT, NONE);
+		PIN_SLP(gpf1-6, INPUT, DOWN);
+		PIN_SLP(gpf1-7, PREV, NONE);
+
+		PIN_SLP(gpf2-0, PREV, NONE);
+		PIN_SLP(gpf2-1, INPUT, DOWN);
+		PIN_SLP(gpf2-2, INPUT, DOWN);
+		PIN_SLP(gpf2-3, INPUT, DOWN);
+		PIN_SLP(gpf2-4, INPUT, DOWN);
+		PIN_SLP(gpf2-5, INPUT, DOWN);
+		PIN_SLP(gpf2-6, INPUT, NONE);
+		PIN_SLP(gpf2-7, INPUT, NONE);
+
+		PIN_SLP(gpf3-0, INPUT, NONE);
+		PIN_SLP(gpf3-1, PREV, NONE);
+		PIN_SLP(gpf3-2, PREV, NONE);
+		PIN_SLP(gpf3-3, PREV, NONE);
+		PIN_SLP(gpf3-4, OUT1, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, PREV, NONE);
+		PIN_SLP(gpj0-1, PREV, NONE);
+		PIN_SLP(gpj0-2, PREV, NONE);
+		PIN_SLP(gpj0-3, INPUT, DOWN);
+		PIN_SLP(gpj0-4, PREV, NONE);
+		PIN_SLP(gpj0-5, PREV, NONE);
+		PIN_SLP(gpj0-6, INPUT, DOWN);
+		PIN_SLP(gpj0-7, INPUT, DOWN);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, PREV, NONE);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, INPUT, DOWN);
+		PIN_SLP(gpj1-4, INPUT, DOWN);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	sleep1: sleep-states {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, PREV, NONE);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, INPUT, DOWN);
+		PIN_SLP(gpl1-1, INPUT, DOWN);
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, INPUT, DOWN);
+		PIN_SLP(gpl2-2, INPUT, DOWN);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, INPUT, DOWN);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, PREV, NONE);
+		PIN_SLP(gpl2-7, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, OUT1, NONE);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, DOWN);
+		PIN_SLP(gpy0-3, INPUT, DOWN);
+		PIN_SLP(gpy0-4, INPUT, DOWN);
+		PIN_SLP(gpy0-5, INPUT, DOWN);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-states {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-states {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+	};
+};

arch/arm/boot/dts/exynos4412.dtsi

@@ -22,6 +22,35 @@
 / {
 	compatible = "samsung,exynos4412", "samsung,exynos4";
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@A00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA00>;
+		};
+
+		cpu@A01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA01>;
+		};
+
+		cpu@A02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA02>;
+		};
+
+		cpu@A03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA03>;
+		};
+	};
+
 	combiner: interrupt-controller@10440000 {
 		samsung,combiner-nr = <20>;
 	};

arch/arm/boot/dts/exynos4x12-pinctrl.dtsi

@@ -12,6 +12,22 @@
  * published by the Free Software Foundation.
 */
 
+#define PIN_PULL_NONE		0
+#define PIN_PULL_DOWN		1
+#define PIN_PULL_UP		3
+
+#define PIN_PDN_OUT0		0
+#define PIN_PDN_OUT1		1
+#define PIN_PDN_INPUT		2
+#define PIN_PDN_PREV		3
+
+#define PIN_SLP(_pin, _mode, _pull)				\
+	_pin {							\
+		samsung,pins = #_pin;				\
+		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+	}
+
 / {
 	pinctrl@11400000 {
 		gpa0: gpa0 {

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -7,12 +7,13 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -26,465 +27,52 @@
 		bootargs = "console=ttySAC2,115200";
 	};
 
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	i2c@12C60000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		samsung,i2c-slave-addr = <0x66>;
-		status = "okay";
-
-		s5m8767_pmic@66 {
-			compatible = "samsung,s5m8767-pmic";
-			reg = <0x66>;
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-			vinb1-supply = <&main_dc_reg>;
-			vinb2-supply = <&main_dc_reg>;
-			vinb3-supply = <&main_dc_reg>;
-			vinb4-supply = <&main_dc_reg>;
-			vinb5-supply = <&main_dc_reg>;
-			vinb6-supply = <&main_dc_reg>;
-			vinb7-supply = <&main_dc_reg>;
-			vinb8-supply = <&main_dc_reg>;
-			vinb9-supply = <&main_dc_reg>;
-
-			vinl1-supply = <&buck7_reg>;
-			vinl2-supply = <&buck7_reg>;
-			vinl3-supply = <&buck7_reg>;
-			vinl4-supply = <&main_dc_reg>;
-			vinl5-supply = <&main_dc_reg>;
-			vinl6-supply = <&main_dc_reg>;
-			vinl7-supply = <&main_dc_reg>;
-			vinl8-supply = <&buck8_reg>;
-			vinl9-supply = <&buck8_reg>;
-
-			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-			s5m8767,pmic-buck4-dvs-voltage = <1200000>;
-			s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
-							<&gpd1 1 0>,
-							<&gpd1 2 0>;
-			s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
-							<&gpx2 4 0>,
-							<&gpx2 5 0>;
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE_1.0V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDD_28IO_DP_1.35V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDD_COMMON1_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDD_IOPERI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDD_EXT_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD_MPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD_XPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VDD_COMMON2_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VDD_33ON_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					op_mode = <1>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD_COMMON3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD_ABB2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD_USB_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDQ_C2C_W_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB0_3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_COMMON4_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDDQ_MMC2_3_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "VDD_33ON_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					op_mode = <1>;
-				};
-
-				ldo22_reg: LDO22 {
-					regulator-name = "EXT_33_OFF";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					op_mode = <1>;
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "EXT_28_OFF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					op_mode = <1>;
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "PVDD_LDO25";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					op_mode = <1>;
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "EXT_18_OFF";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					op_mode = <1>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <912500>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDD_MEM_1.35V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1355000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "PVDD_BUCK7";
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "PVDD_BUCK8";
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "VDD_33_OFF_EXT1";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <3000000>;
-					op_mode = <1>;
-				};
-			};
-		};
-	};
-
-	i2c@12C80000 {
-		status = "okay";
-
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		samsung,i2c-slave-addr = <0x50>;
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12C90000 {
-		status = "okay";
-
-		wm1811a@1a {
-
-			compatible = "wlf,wm1811";
-			reg = <0x1a>;
-
-			AVDD2-supply = <&main_dc_reg>;
-			CPVDD-supply = <&main_dc_reg>;
-			DBVDD1-supply = <&main_dc_reg>;
-			DBVDD2-supply = <&main_dc_reg>;
-			DBVDD3-supply = <&main_dc_reg>;
-			LDO1VDD-supply = <&main_dc_reg>;
-			SPKVDD1-supply = <&main_dc_reg>;
-			SPKVDD2-supply = <&main_dc_reg>;
-
-			wlf,ldo1ena = <&gpb0 0 0>;
-			wlf,ldo2ena = <&gpb0 1 0>;
-		};
-	};
-
-	i2c@12CE0000 {
-		status = "okay";
-
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		samsung,i2c-slave-addr = <0x38>;
-
-		hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	i2c@121D0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <40000>;
-		samsung,i2c-slave-addr = <0x38>;
-
-		sata_phy_i2c:sata-phy@38 {
-			compatible = "samsung,exynos-sataphy-i2c";
-			reg = <0x38>;
-		};
-	};
-
-	sata@122F0000 {
-		status = "okay";
-	};
-
-	sata-phy@12170000 {
-		status = "okay";
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-	};
-
-	mmc_0: mmc@12200000 {
-		status = "okay";
-		num-slots = <1>;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		vmmc-supply = <&mmc_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-	};
-
-	mmc_2: mmc@12220000 {
-		status = "okay";
-		num-slots = <1>;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		vmmc-supply = <&mmc_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		bus-width = <4>;
-		disable-wp;
-		cap-sd-highspeed;
-	};
-
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 
 		menu {
 			label = "SW-TACT2";
-			gpios = <&gpx1 4 1>;
+			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 			gpio-key,wakeup;
 		};
 
 		home {
 			label = "SW-TACT3";
-			gpios = <&gpx1 5 1>;
+			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			gpio-key,wakeup;
 		};
 
 		up {
 			label = "SW-TACT4";
-			gpios = <&gpx1 6 1>;
+			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
 			gpio-key,wakeup;
 		};
 
 		down {
 			label = "SW-TACT5";
-			gpios = <&gpx1 7 1>;
+			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
 			gpio-key,wakeup;
 		};
 
 		back {
 			label = "SW-TACT6";
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			gpio-key,wakeup;
 		};
 
 		wakeup {
 			label = "SW-TACT7";
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
 			gpio-key,wakeup;
 		};
 	};
 
-	hdmi {
-		hpd-gpio = <&gpx3 7 2>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-		vdd-supply = <&ldo8_reg>;
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -502,7 +90,7 @@
 			regulator-name = "VDD_33ON_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 1>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
 			enable-active-high;
 		};
 
@@ -520,46 +108,455 @@
 		};
 	};
 
-	dp-controller@145B0000 {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-		status = "okay";
+	// SMSC USB3503 connected in hardware only mode as a PHY
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
 	};
+};
 
-	fimd: fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				/* 2560x1600 DP panel */
-				clock-frequency = <50000>;
-				hactive = <2560>;
-				vactive = <1600>;
-				hfront-porch = <48>;
-				hback-porch = <80>;
-				hsync-len = <32>;
-				vback-porch = <16>;
-				vfront-porch = <8>;
-				vsync-len = <6>;
-			};
+&dp {
+	status = "okay";
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <4>;
+};
+
+&fimd {
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing@0 {
+			/* 2560x1600 DP panel */
+			clock-frequency = <50000>;
+			hactive = <2560>;
+			vactive = <1600>;
+			hfront-porch = <48>;
+			hback-porch = <80>;
+			hsync-len = <32>;
+			vback-porch = <16>;
+			vfront-porch = <8>;
+			vsync-len = <6>;
 		};
 	};
+};
 
-	usb_hub_bus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+	vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	samsung,i2c-slave-addr = <0x66>;
+
+	s5m8767_pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		vinb1-supply = <&main_dc_reg>;
+		vinb2-supply = <&main_dc_reg>;
+		vinb3-supply = <&main_dc_reg>;
+		vinb4-supply = <&main_dc_reg>;
+		vinb5-supply = <&main_dc_reg>;
+		vinb6-supply = <&main_dc_reg>;
+		vinb7-supply = <&main_dc_reg>;
+		vinb8-supply = <&main_dc_reg>;
+		vinb9-supply = <&main_dc_reg>;
+
+		vinl1-supply = <&buck7_reg>;
+		vinl2-supply = <&buck7_reg>;
+		vinl3-supply = <&buck7_reg>;
+		vinl4-supply = <&main_dc_reg>;
+		vinl5-supply = <&main_dc_reg>;
+		vinl6-supply = <&main_dc_reg>;
+		vinl7-supply = <&main_dc_reg>;
+		vinl8-supply = <&buck8_reg>;
+		vinl9-supply = <&buck8_reg>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+		                              <&gpd1 1 GPIO_ACTIVE_HIGH>,
+		                              <&gpd1 2 GPIO_ACTIVE_HIGH>;
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+		                             <&gpx2 4 GPIO_ACTIVE_HIGH>,
+		                             <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
 
-		// SMSC USB3503 connected in hardware only mode as a PHY
-		usb_hub: usb_hub {
-			compatible = "smsc,usb3503a";
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_28IO_DP_1.35V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_COMMON1_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_IOPERI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_EXT_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
 
-			reset-gpios = <&gpx3 5 1>;
-			connect-gpios = <&gpd1 7 1>;
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_XPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD_COMMON2_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_33ON_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD_COMMON3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_ABB2_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDQ_C2C_W_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB0_3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_COMMON4_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDQ_MMC2_3_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDD_33ON_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "EXT_33_OFF";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "EXT_28_OFF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "PVDD_LDO25";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "EXT_18_OFF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <912500>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM_1.35V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1355000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "PVDD_BUCK7";
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "PVDD_BUCK8";
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_33_OFF_EXT1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+			};
 		};
 	};
 };
+
+&i2c_2 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	wm1811a@1a {
+		compatible = "wlf,wm1811";
+		reg = <0x1a>;
+
+		AVDD2-supply = <&main_dc_reg>;
+		CPVDD-supply = <&main_dc_reg>;
+		DBVDD1-supply = <&main_dc_reg>;
+		DBVDD2-supply = <&main_dc_reg>;
+		DBVDD3-supply = <&main_dc_reg>;
+		LDO1VDD-supply = <&main_dc_reg>;
+		SPKVDD1-supply = <&main_dc_reg>;
+		SPKVDD2-supply = <&main_dc_reg>;
+
+		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x38>;
+
+	hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2c_9 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <40000>;
+	samsung,i2c-slave-addr = <0x38>;
+
+	sata_phy_i2c:sata-phy@38 {
+		compatible = "samsung,exynos-sataphy-i2c";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	vmmc-supply = <&mmc_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	vmmc-supply = <&mmc_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -7,9 +7,11 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5250.dtsi"
 
 / {
@@ -27,165 +29,6 @@
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	i2c@12C60000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		status = "okay";
-
-		eeprom@50 {
-			compatible = "samsung,s524ad0xd1";
-			reg = <0x50>;
-		};
-
-		max77686@09 {
-			compatible = "maxim,max77686";
-			reg = <0x09>;
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 0>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "P1.0V_LDO_OUT1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "P1.2V_LDO_OUT2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "P1.8V_LDO_OUT3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "P2.8V_LDO_OUT4";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "P1.8V_LDO_OUT5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "P1.1V_LDO_OUT6";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "P1.1V_LDO_OUT7";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "P1.0V_LDO_OUT8";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "P1.8V_LDO_OUT10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "P1.8V_LDO_OUT11";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "P3.0V_LDO_OUT12";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "P1.8V_LDO_OUT13";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "P1.8V_LDO_OUT14";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "P1.0V_LDO_OUT15";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "P1.8V_LDO_OUT16";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "P1.8V_BUCK_OUT5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
 	vdd: fixed-regulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-supply";
@@ -210,199 +53,360 @@
 		regulator-always-on;
 	};
 
-	i2c@12C70000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		status = "okay";
+	sound {
+		compatible = "samsung,smdk-wm8994";
 
-		eeprom@51 {
-			compatible = "samsung,s524ad0xd1";
-			reg = <0x51>;
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&wm8994>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
 		};
 
-		wm8994: wm8994@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
+		codec_mclk: codec-mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <16934000>;
+		};
+	};
+};
 
-			gpio-controller;
-			#gpio-cells = <2>;
+&dp {
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <4>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	status = "okay";
+};
 
-			clocks = <&codec_mclk>;
-			clock-names = "MCLK1";
+&ehci {
+	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
 
-			AVDD2-supply = <&vdd>;
-			CPVDD-supply = <&vdd>;
-			DBVDD-supply = <&dbvdd>;
-			SPKVDD1-supply = <&spkvdd>;
-			SPKVDD2-supply = <&spkvdd>;
+&fimd {
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing@0 {
+			/* 1280x800 */
+			clock-frequency = <50000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <4>;
+			hback-porch = <4>;
+			hsync-len = <4>;
+			vback-porch = <4>;
+			vfront-porch = <4>;
+			vsync-len = <4>;
 		};
 	};
+};
 
-	i2c@121D0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <40000>;
-		samsung,i2c-slave-addr = <0x38>;
-		status = "okay";
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
 
-		sata_phy_i2c:sata-phy@38 {
-			compatible = "samsung,exynos-sataphy-i2c";
-			reg = <0x38>;
-		};
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+
+	eeprom@50 {
+		compatible = "samsung,s524ad0xd1";
+		reg = <0x50>;
 	};
 
-	i2c@12C80000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
+	max77686@09 {
+		compatible = "maxim,max77686";
+		reg = <0x09>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
 
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.2V_LDO_OUT2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
 
-	i2c@12CE0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
 
-		hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
+			ldo4_reg: LDO4 {
+				regulator-name = "P2.8V_LDO_OUT4";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
 
-	sata@122F0000 {
-		status = "okay";
-	};
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.8V_LDO_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
 
-	sata-phy@12170000 {
-		status = "okay";
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-	};
+			ldo6_reg: LDO6 {
+				regulator-name = "P1.1V_LDO_OUT6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
 
-	mmc@12200000 {
-		status = "okay";
-		num-slots = <1>;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-	};
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
 
-	mmc@12220000 {
-		status = "okay";
-		num-slots = <1>;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		bus-width = <4>;
-		disable-wp;
-		cap-sd-highspeed;
-	};
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
 
-	spi_1: spi@12d30000 {
-		cs-gpios = <&gpa2 5 0>;
-		status = "okay";
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
 
-		w25q80bw@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <1000000>;
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
 
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
 			};
 		};
 	};
+};
 
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-	};
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
 
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
+	eeprom@51 {
+		compatible = "samsung,s524ad0xd1";
+		reg = <0x51>;
 	};
 
-	i2s0: i2s@03830000 {
-		status = "okay";
+	wm8994: wm8994@1a {
+		compatible = "wlf,wm8994";
+		reg = <0x1a>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		clocks = <&codec_mclk>;
+		clock-names = "MCLK1";
+
+		AVDD2-supply = <&vdd>;
+		CPVDD-supply = <&vdd>;
+		DBVDD-supply = <&dbvdd>;
+		SPKVDD1-supply = <&spkvdd>;
+		SPKVDD2-supply = <&spkvdd>;
 	};
+};
 
-	sound {
-		compatible = "samsung,smdk-wm8994";
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
 
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&wm8994>;
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
 	};
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
 
-	usb@12110000 {
-		samsung,vbus-gpio = <&gpx2 6 0>;
+	hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
 	};
+};
+
+&i2c_9 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <40000>;
+	samsung,i2c-slave-addr = <0x38>;
 
-	dp-controller@145B0000 {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		status = "okay";
+	sata_phy_i2c: sata-phy@38 {
+		compatible = "samsung,exynos-sataphy-i2c";
+		reg = <0x38>;
 	};
+};
 
-	fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				/* 1280x800 */
-				clock-frequency = <50000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hfront-porch = <4>;
-				hback-porch = <4>;
-				hsync-len = <4>;
-				vback-porch = <4>;
-				vfront-porch = <4>;
-				vsync-len = <4>;
-			};
+&i2s0 {
+	status = "okay";
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+	status = "okay";
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+
+	w25q80bw@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25x80";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
 		};
-	};
 
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
 		};
 
-		codec_mclk: codec-mclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <16934000>;
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0xc0000>;
 		};
 	};
 };

arch/arm/boot/dts/exynos5250-snow.dts

@@ -6,10 +6,13 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 #include "exynos5250.dtsi"
 
 / {
@@ -25,76 +28,7 @@
 	};
 
 	chosen {
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	pinctrl@11400000 {
-		ec_irq: ec-irq {
-			samsung,pins = "gpx1-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pin-drv = <0>;
-		};
-
-		max98095_en: max98095-en {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		tps65090_irq: tps65090-irq {
-			samsung,pins = "gpx2-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		usb3_vbus_en: usb3-vbus-en {
-			samsung,pins = "gpx2-7";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		hdmi_hpd_irq: hdmi-hpd-irq {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		arb_their_claim: arb-their-claim {
-			samsung,pins = "gpe0-4";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		arb_our_claim: arb-our-claim {
-			samsung,pins = "gpf0-3";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+		bootargs = "console=tty1";
 	};
 
 	gpio-keys {
@@ -102,14 +36,14 @@
 
 		power {
 			label = "Power";
-			gpios = <&gpx1 3 1>;
-			linux,code = <116>; /* KEY_POWER */
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
 
 		lid-switch {
 			label = "Lid";
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
@@ -130,8 +64,8 @@
 
 		i2c-parent = <&{/i2c@12CA0000}>;
 
-		our-claim-gpio = <&gpf0 3 1>;
-		their-claim-gpios = <&gpe0 4 1>;
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
 		slew-delay-us = <10>;
 		wait-retry-us = <3000>;
 		wait-free-us = <50000>;
@@ -154,7 +88,7 @@
 			cros_ec: embedded-controller {
 				compatible = "google,cros-ec-i2c";
 				reg = <0x1e>;
-				interrupts = <6 0>;
+				interrupts = <6 IRQ_TYPE_NONE>;
 				interrupt-parent = <&gpx1>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&ec_irq>;
@@ -241,13 +175,6 @@
 	};
 
 	i2c@12CD0000 {
-		max98095: codec@11 {
-			compatible = "maxim,max98095";
-			reg = <0x11>;
-			pinctrl-0 = <&max98095_en>;
-			pinctrl-names = "default";
-		};
-
 		ptn3460: lvds-bridge@20 {
 			compatible = "nxp,ptn3460";
 			reg = <0x20>;
@@ -258,10 +185,6 @@
 		};
 	};
 
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
 	sound {
 		compatible = "google,snow-audio-max98095";
 
@@ -275,20 +198,12 @@
 		regulator-name = "P5.0V_USB3CON";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 0>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb3_vbus_en>;
 		enable-active-high;
 	};
 
-	phy@12100000 {
-		vbus-supply = <&usb3_vbus_reg>;
-	};
-
-	usb@12110000 {
-		samsung,vbus-gpio = <&gpx1 1 0>;
-	};
-
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -296,18 +211,6 @@
 		};
 	};
 
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-		phy = <&hdmiphy>;
-		ddc = <&i2c_2>;
-		hdmi-en-supply = <&tps65090_fet7>;
-		vdd-supply = <&ldo8_reg>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 1000000 0>;
@@ -319,30 +222,46 @@
 		pinctrl-names = "default";
 	};
 
-	fimd@14400000 {
-		status = "okay";
-		samsung,invert-vclk;
-	};
-
 	panel: panel {
 		compatible = "auo,b116xw03";
 		power-supply = <&fet6>;
 		backlight = <&backlight>;
 	};
+};
 
-	dp-controller@145B0000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <2>;
-		samsung,hpd-gpio = <&gpx0 7 0>;
-		bridge = <&ptn3460>;
-	};
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+	bridge = <&ptn3460>;
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -350,10 +269,10 @@
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <378000>;
 
-	max77686@09 {
+	max77686: max77686@09 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
+		interrupts = <2 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
@@ -503,7 +422,7 @@
 	trackpad {
 		reg = <0x67>;
 		compatible = "cypress,cyapa";
-		interrupts = <2 0>;
+		interrupts = <2 IRQ_TYPE_NONE>;
 		interrupt-parent = <&gpx1>;
 		wakeup-source;
 	};
@@ -550,6 +469,13 @@
 	status = "okay";
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
+
+	max98095: codec@11 {
+		compatible = "maxim,max98095";
+		reg = <0x11>;
+		pinctrl-0 = <&max98095_en>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c_8 {
@@ -563,6 +489,10 @@
 	};
 };
 
+&i2s0 {
+	status = "okay";
+};
+
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
@@ -587,7 +517,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	bus-width = <4>;
-	wp-gpios = <&gpc2 1 0>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
 	cap-sd-highspeed;
 };
 
@@ -610,12 +540,82 @@
 };
 
 &pinctrl_0 {
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	max98095_en: max98095-en {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <0>;
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	arb_our_claim: arb-our-claim {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
 };
 
 &spi_1 {
@@ -624,4 +624,8 @@
 	num-cs = <1>;
 };
 
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
 #include "cros-ec-keyboard.dtsi"

arch/arm/boot/dts/exynos5250-spring.dts

@@ -0,0 +1,536 @@
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Google Spring";
+	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503a";
+		reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <1>;
+	samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&ldo8_reg>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	s5m8767-pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+		wakeup-source;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+		                              <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+		                              <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+		                             <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+		                             <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+		/*
+		 * The following arrays of DVS voltages are not used, since we are
+		 * not using GPIOs to control PMIC bucks, but they must be defined
+		 * to please the driver.
+		 */
+		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+		                                 <1250000>, <1200000>,
+		                                 <1150000>, <1100000>,
+		                                 <1000000>, <950000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+		                                 <1100000>, <1100000>,
+		                                 <1000000>, <1000000>,
+		                                 <1000000>, <1000000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+		                                 <1200000>, <1200000>,
+		                                 <1200000>, <1200000>,
+		                                 <1200000>, <1200000>;
+
+		clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "en32khz_ap",
+			                     "en32khz_cp",
+			                     "en32khz_bt";
+		};
+
+		regulators {
+			ldo4_reg: LDO4 {
+				regulator-name = "P1.0V_LDO_OUT4";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.0V_LDO_OUT5";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_mydp";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "P2.8V_LDO_OUT17";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_bridge";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.2V_BUCK_OUT6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <0>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_ummc";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	cros_ec: embedded-controller {
+		compatible = "google,cros-ec-i2c";
+		reg = <0x1e>;
+		interrupts = <6 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_irq>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	hdmiphy: hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl_0 {
+	s5m8767_dvs: s5m8767-dvs {
+		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp-hpd-gpio {
+		samsung,pins = "gpc3-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	s5m8767_ds: s5m8767-ds {
+		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	hsic_reset: hsic-reset {
+		samsung,pins = "gpe1-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&sd1_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+	samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"

arch/arm/boot/dts/exynos5250.dtsi

@@ -218,7 +218,7 @@
 		clock-names = "fimg2d";
 	};
 
-	codec@11000000 {
+	mfc: codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
@@ -227,7 +227,7 @@
 		clock-names = "mfc";
 	};
 
-	rtc@101E0000 {
+	rtc: rtc@101E0000 {
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -261,7 +261,7 @@
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	sata@122F0000 {
+	sata: sata@122F0000 {
 		compatible = "snps,dwc-ahci";
 		samsung,sata-freq = <66>;
 		reg = <0x122F0000 0x1ff>;
@@ -573,7 +573,7 @@
 		#phy-cells = <1>;
 	};
 
-	usb@12110000 {
+	ehci: usb@12110000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12110000 0x100>;
 		interrupts = <0 71 0>;
@@ -588,7 +588,7 @@
 		};
 	};
 
-	usb@12120000 {
+	ohci: usb@12120000 {
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12120000 0x100>;
 		interrupts = <0 71 0>;
@@ -710,7 +710,7 @@
 		clock-names = "gscl";
 	};
 
-	hdmi {
+	hdmi: hdmi {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
@@ -736,14 +736,14 @@
 		#phy-cells = <0>;
 	};
 
-	dp-controller@145B0000 {
+	dp: dp-controller@145B0000 {
 		clocks = <&clock CLK_DP>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
-	fimd@14400000 {
+	fimd: fimd@14400000 {
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -12,6 +12,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
 #include "exynos5420.dtsi"
 
 / {
@@ -151,7 +152,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	max77802-pmic@9 {
+	max77802: max77802-pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&gpx3>;
 		interrupts = <1 IRQ_TYPE_NONE>;
@@ -560,7 +561,7 @@
 	status = "okay";
 	num-slots = <1>;
 	broken-cd;
-	caps2-mmc-hs200-1_8v;
+	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
@@ -727,6 +728,8 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &spi_2 {

arch/arm/boot/dts/exynos5800-peach-pi.dts

@@ -12,6 +12,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
 #include "exynos5800.dtsi"
 
 / {
@@ -150,7 +151,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	max77802-pmic@9 {
+	max77802: max77802-pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&gpx3>;
 		interrupts = <1 IRQ_TYPE_NONE>;
@@ -548,7 +549,7 @@
 	status = "okay";
 	num-slots = <1>;
 	broken-cd;
-	caps2-mmc-hs200-1_8v;
+	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
 	card-detect-delay = <200>;
@@ -715,6 +716,8 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &spi_2 {

arch/arm/boot/dts/s3c6410-mini6410.dts

@@ -198,10 +198,6 @@
 	status = "okay";
 };
 
-&pwm {
-	status = "okay";
-};
-
 &pinctrl0 {
 	gpio_leds: gpio-leds {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";

arch/arm/boot/dts/s3c64xx.dtsi

@@ -172,7 +172,6 @@
 			clocks = <&clocks PCLK_PWM>;
 			samsung,pwm-outputs = <0>, <1>;
 			#pwm-cells = <3>;
-			status = "disabled";
 		};
 
 		pinctrl0: pinctrl@7f008000 {