arm64: dts: hisilicon: Add missing clocks property for CPUs

The clocks property should either be present for all the CPUs of a
cluster or none. If these are present only for a subset of CPUs of a
cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add missing clocks property.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

arch/arm64/boot/dts/hisilicon/hi6220.dtsi

@@ -99,6 +99,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -111,6 +112,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -123,6 +125,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -135,6 +138,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -147,6 +151,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -159,6 +164,7 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -171,6 +177,7 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 			#cooling-cells = <2>; /* min followed by max */