MIPS: BPF: Fix build on pre-R2 little endian CPUs

The rotr, seh and wsbh instructions have been introduced with the R2
ISA. Thus the current BPF code fails to build on pre-R2 little endian
CPUs:

    CC      arch/mips/net/bpf_jit.o
    AS      arch/mips/net/bpf_jit_asm.o
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S: Assembler messages:
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:67: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:68: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:83: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:84: Error: opcode not supported on this processor: mips32 (mips32) `seh $19,$8'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:151: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$12'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:153: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:164: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $19,$12'
  /home/aurel32/linux-4.2/scripts/Makefile.build:294: recipe for target 'arch/mips/net/bpf_jit_asm.o' failed

Fix that by providing equivalent code for these CPUs.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: stable@vger.kernel.org # v4.2+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11098/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/net/bpf_jit_asm.S

@@ -64,8 +64,20 @@ sk_load_word_positive:
 	PTR_ADDU t1, $r_skb_data, offset
 	lw	$r_A, 0(t1)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	wsbh	t0, $r_A
 	rotr	$r_A, t0, 16
+# else
+	sll	t0, $r_A, 24
+	srl	t1, $r_A, 24
+	srl	t2, $r_A, 8
+	or	t0, t0, t1
+	andi	t2, t2, 0xff00
+	andi	t1, $r_A, 0xff00
+	or	t0, t0, t2
+	sll	t1, t1, 8
+	or	$r_A, t0, t1
+# endif
 #endif
 	jr	$r_ra
 	 move	$r_ret, zero
@@ -80,8 +92,16 @@ sk_load_half_positive:
 	PTR_ADDU t1, $r_skb_data, offset
 	lh	$r_A, 0(t1)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	wsbh	t0, $r_A
 	seh	$r_A, t0
+# else
+	sll	t0, $r_A, 24
+	andi	t1, $r_A, 0xff00
+	sra	t0, t0, 16
+	srl	t1, t1, 8
+	or	$r_A, t0, t1
+# endif
 #endif
 	jr	$r_ra
 	 move	$r_ret, zero
@@ -148,9 +168,22 @@ sk_load_byte_positive:
 NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
 	bpf_slow_path_common(4)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	wsbh	t0, $r_s0
 	jr	$r_ra
 	 rotr	$r_A, t0, 16
+# else
+	sll	t0, $r_s0, 24
+	srl	t1, $r_s0, 24
+	srl	t2, $r_s0, 8
+	or	t0, t0, t1
+	andi	t2, t2, 0xff00
+	andi	t1, $r_s0, 0xff00
+	or	t0, t0, t2
+	sll	t1, t1, 8
+	jr	$r_ra
+	 or	$r_A, t0, t1
+# endif
 #else
 	jr	$r_ra
 	 move	$r_A, $r_s0
@@ -161,8 +194,17 @@ NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
 NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
 	bpf_slow_path_common(2)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	jr	$r_ra
 	 wsbh	$r_A, $r_s0
+# else
+	sll	t0, $r_s0, 8
+	andi	t1, $r_s0, 0xff00
+	andi	t0, t0, 0xff00
+	srl	t1, t1, 8
+	jr	$r_ra
+	 or	$r_A, t0, t1
+# endif
 #else
 	jr	$r_ra
 	 move	$r_A, $r_s0