qed: Don't over-do producer cleanup for Rx

Before requesting the firmware to start Rx queues,
driver goes and sets the queue producer in the device to 0.
But while the producer is 32-bit, the driver currently clears 64 bits,
effectively zeroing an additional CID's producer as well.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_l2.c

@@ -590,7 +590,7 @@ qed_sp_eth_rx_queue_start(struct qed_hwfn *p_hwfn,
 			  u16 cqe_pbl_size, void __iomem **pp_prod)
 {
 	struct qed_hw_cid_data *p_rx_cid;
-	u64 init_prod_val = 0;
+	u32 init_prod_val = 0;
 	u16 abs_l2_queue = 0;
 	u8 abs_stats_id = 0;
 	int rc;
@@ -618,7 +618,7 @@ qed_sp_eth_rx_queue_start(struct qed_hwfn *p_hwfn,
 				 MSTORM_ETH_PF_PRODS_OFFSET(abs_l2_queue);
 
 	/* Init the rcq, rx bd and rx sge (if valid) producers to 0 */
-	__internal_ram_wr(p_hwfn, *pp_prod, sizeof(u64),
+	__internal_ram_wr(p_hwfn, *pp_prod, sizeof(u32),
 			  (u32 *)(&init_prod_val));
 
 	/* Allocate a CID for the queue */

drivers/net/ethernet/qlogic/qed/qed_vf.c

@@ -388,7 +388,7 @@ int qed_vf_pf_rxq_start(struct qed_hwfn *p_hwfn,
 
 	/* Learn the address of the producer from the response */
 	if (pp_prod) {
-		u64 init_prod_val = 0;
+		u32 init_prod_val = 0;
 
 		*pp_prod = (u8 __iomem *)p_hwfn->regview + resp->offset;
 		DP_VERBOSE(p_hwfn, QED_MSG_IOV,
@@ -396,7 +396,7 @@ int qed_vf_pf_rxq_start(struct qed_hwfn *p_hwfn,
 			   rx_qid, *pp_prod, resp->offset);
 
 		/* Init the rcq, rx bd and rx sge (if valid) producers to 0 */
-		__internal_ram_wr(p_hwfn, *pp_prod, sizeof(u64),
+		__internal_ram_wr(p_hwfn, *pp_prod, sizeof(u32),
 				  (u32 *)&init_prod_val);
 	}