Merge tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for the -rc cycle:

- Fix a device tree based booting vs legacy booting regression for
  omap3 crypto hardware by adding the missing DMA channels.

- Fix /sys/bus/soc/devices/soc0/family for am33xx devices.

- Fix two timer issues that can cause hangs if the timer related
  hwmod data is missing like it often initially is for new SoCs.

- Remove pcie hwmods entry from dts as that causes runtime PM to
  fail for the PHYs.

- A paper bag type dts configuration fix for dm816x GPIO
  interrupts that I just noticed. This is most of the changes
  diffstat wise, but as it's a basic feature for connecting
  devices and things work otherwise, it should be fixed.

* tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix gpio interrupts for dm816x
  ARM: dts: dra7: remove ti,hwmod property from pcie phy
  ARM: OMAP: dmtimer: disable pm runtime on remove
  ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
  ARM: OMAP2+: Fix socbus family info for AM33xx devices
  ARM: dts: omap3: Add missing dmas for crypto

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/dm8168-evm.dts

@@ -36,6 +36,20 @@
 		>;
 	};
 
+	mmc_pins: pinmux_mmc_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
+			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
+			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
+			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
+			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
+			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
+			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
+		>;
+	};
+
 	usb0_pins: pinmux_usb0_pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0d00, MUX_MODE0)			/* USB0_DRVVBUS */
@@ -137,7 +151,12 @@
 };
 
 &mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
 	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */

arch/arm/boot/dts/dm816x.dtsi

@@ -150,17 +150,27 @@
 		};
 
 		gpio1: gpio@48032000 {
-			compatible = "ti,omap3-gpio";
+			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
 			reg = <0x48032000 0x1000>;
-			interrupts = <97>;
+			interrupts = <96>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@4804c000 {
-			compatible = "ti,omap3-gpio";
+			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
 			reg = <0x4804c000 0x1000>;
-			interrupts = <99>;
+			interrupts = <98>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		gpmc: gpmc@50000000 {

arch/arm/boot/dts/dra7.dtsi

@@ -1111,7 +1111,6 @@
 					      "wkupclk", "refclk",
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
-				ti,hwmods = "pcie1-phy";
 			};
 
 			pcie2_phy: pciephy@4a095000 {
@@ -1130,7 +1129,6 @@
 					      "wkupclk", "refclk",
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
-				ti,hwmods = "pcie2-phy";
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/omap3.dtsi

@@ -92,6 +92,8 @@
 			ti,hwmods = "aes";
 			reg = <0x480c5000 0x50>;
 			interrupts = <0>;
+			dmas = <&sdma 65 &sdma 66>;
+			dma-names = "tx", "rx";
 		};
 
 		prm: prm@48306000 {
@@ -550,6 +552,8 @@
 			ti,hwmods = "sham";
 			reg = <0x480c3000 0x64>;
 			interrupts = <49>;
+			dmas = <&sdma 69>;
+			dma-names = "rx";
 		};
 
 		smartreflex_core: smartreflex@480cb000 {

arch/arm/mach-omap2/id.c

@@ -720,6 +720,8 @@ static const char * __init omap_get_family(void)
 		return kasprintf(GFP_KERNEL, "OMAP4");
 	else if (soc_is_omap54xx())
 		return kasprintf(GFP_KERNEL, "OMAP5");
+	else if (soc_is_am33xx() || soc_is_am335x())
+		return kasprintf(GFP_KERNEL, "AM33xx");
 	else if (soc_is_am43xx())
 		return kasprintf(GFP_KERNEL, "AM43xx");
 	else if (soc_is_dra7xx())

arch/arm/plat-omap/dmtimer.c

@@ -799,6 +799,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	const struct of_device_id *match;
 	const struct dmtimer_platform_data *pdata;
+	int ret;
 
 	match = of_match_device(of_match_ptr(omap_timer_match), dev);
 	pdata = match ? match->data : dev->platform_data;
@@ -860,7 +861,12 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	}
 
 	if (!timer->reserved) {
-		pm_runtime_get_sync(dev);
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0) {
+			dev_err(dev, "%s: pm_runtime_get_sync failed!\n",
+				__func__);
+			goto err_get_sync;
+		}
 		__omap_dm_timer_init_regs(timer);
 		pm_runtime_put(dev);
 	}
@@ -873,6 +879,11 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	dev_dbg(dev, "Device Probed.\n");
 
 	return 0;
+
+err_get_sync:
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	return ret;
 }
 
 /**
@@ -899,6 +910,8 @@ static int omap_dm_timer_remove(struct platform_device *pdev)
 		}
 	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
+	pm_runtime_disable(&pdev->dev);
+
 	return ret;
 }