Merge branch 'x86/core' into perfcounters/core

Conflicts:
	arch/x86/Kconfig
	arch/x86/kernel/apic.c
	arch/x86/kernel/setup_percpu.c

Documentation/x86/boot.txt

@@ -158,7 +158,7 @@ Offset	Proto	Name		Meaning
 0202/4	2.00+	header		Magic signature "HdrS"
 0206/2	2.00+	version		Boot protocol version supported
 0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
-020C/2	2.00+	start_sys	The load-low segment (0x1000) (obsolete)
+020C/2	2.00+	start_sys_seg	The load-low segment (0x1000) (obsolete)
 020E/2	2.00+	kernel_version	Pointer to kernel version string
 0210/1	2.00+	type_of_loader	Boot loader identifier
 0211/1	2.00+	loadflags	Boot protocol option flags
@@ -170,10 +170,11 @@ Offset	Proto	Name		Meaning
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
 0226/2	N/A	pad1		Unused
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
-022C/4	2.03+	initrd_addr_max	Highest legal initrd address
+022C/4	2.03+	ramdisk_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/3	N/A	pad2		Unused
+0235/1	N/A	pad2		Unused
+0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -299,14 +300,14 @@ Protocol:	2.00+
   e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
   10.17.
 
-Field name:	readmode_swtch
+Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
 Protocol:	2.00+
 
   Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
 
-Field name:	start_sys
+Field name:	start_sys_seg
 Type:		read
 Offset/size:	0x20c/2
 Protocol:	2.00+
@@ -468,7 +469,7 @@ Protocol:	2.02+
   zero, the kernel will assume that your boot loader does not support
   the 2.02+ protocol.
 
-Field name:	initrd_addr_max
+Field name:	ramdisk_max
 Type:		read
 Offset/size:	0x22c/4
 Protocol:	2.03+

Makefile

@@ -532,8 +532,9 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
 
 # Force gcc to behave correct even for buggy distributions
-# Arch Makefiles may override this setting
+ifndef CONFIG_CC_STACKPROTECTOR
 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
 
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls

arch/ia64/include/asm/percpu.h

@@ -27,12 +27,12 @@ extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data.percpu")))
-
 #define per_cpu_init()				(__phys_per_cpu_start)
 
 #endif	/* SMP */
 
+#define PER_CPU_BASE_SECTION ".data.percpu"
+
 /*
  * Be extremely careful when taking the address of this variable!  Due to virtual
  * remapping, it is different from the canonical address returned by __get_cpu_var(var)!

arch/ia64/include/asm/uv/uv.h

@@ -0,0 +1,13 @@
+#ifndef _ASM_IA64_UV_UV_H
+#define _ASM_IA64_UV_UV_H
+
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+
+static inline int is_uv_system(void)
+{
+	/* temporary support for running on hardware simulator */
+	return IS_MEDUSA() || ia64_platform_is("uv");
+}
+
+#endif	/* _ASM_IA64_UV_UV_H */

arch/ia64/kernel/acpi.c

@@ -199,6 +199,10 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
 	return __va(phys_addr);
 }
 
+char *__init __acpi_unmap_table(unsigned long virt_addr, unsigned long size)
+{
+}
+
 /* --------------------------------------------------------------------------
                             Boot-time Table Parsing
    -------------------------------------------------------------------------- */

arch/x86/Kconfig

@@ -5,7 +5,7 @@ mainmenu "Linux Kernel Configuration for x86"
 config 64BIT
 	bool "64-bit kernel" if ARCH = "x86"
 	default ARCH = "x86_64"
-	help
+	---help---
 	  Say yes to build a 64-bit kernel - formerly known as x86_64
 	  Say no to build a 32-bit kernel - formerly known as i386
 
@@ -34,8 +34,8 @@ config X86
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
-	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_KVM
+	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_GENERIC_DMA_COHERENT if X86_32
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
@@ -133,18 +133,16 @@ config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
 config HAVE_SETUP_PER_CPU_AREA
-	def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER)
+	def_bool y
 
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
-	depends on !SMP || !X86_VOYAGER
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on !X86_VOYAGER
 
 config ZONE_DMA32
 	bool
@@ -174,11 +172,6 @@ config GENERIC_PENDING_IRQ
 	depends on GENERIC_HARDIRQS && SMP
 	default y
 
-config X86_SMP
-	bool
-	depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
-	default y
-
 config USE_GENERIC_SMP_HELPERS
 	def_bool y
 	depends on SMP
@@ -194,19 +187,17 @@ config X86_64_SMP
 config X86_HT
 	bool
 	depends on SMP
-	depends on (X86_32 && !X86_VOYAGER) || X86_64
-	default y
-
-config X86_BIOS_REBOOT
-	bool
-	depends on !X86_VOYAGER
 	default y
 
 config X86_TRAMPOLINE
 	bool
-	depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
+	depends on SMP || (64BIT && ACPI_SLEEP)
 	default y
 
+config X86_32_LAZY_GS
+	def_bool y
+	depends on X86_32 && !CC_STACKPROTECTOR
+
 config KTIME_SCALAR
 	def_bool X86_32
 source "init/Kconfig"
@@ -244,14 +235,10 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
-config X86_HAS_BOOT_CPU_ID
-	def_bool y
-	depends on X86_VOYAGER
-
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
 	depends on PCI_MSI || HT_IRQ
-	help
+	---help---
 	  This enables support for sparse irqs. This is useful for distro
 	  kernels that want to define a high CONFIG_NR_CPUS value but still
 	  want to have low kernel memory footprint on smaller machines.
@@ -265,114 +252,114 @@ config NUMA_MIGRATE_IRQ_DESC
 	bool "Move irq desc when changing irq smp_affinity"
 	depends on SPARSE_IRQ && NUMA
 	default n
-	help
+	---help---
 	  This enables moving irq_desc to cpu/node that irq will use handled.
 
 	  If you don't know what to do here, say N.
 
-config X86_FIND_SMP_CONFIG
-	def_bool y
-	depends on X86_MPPARSE || X86_VOYAGER
-
 config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
 	default y
 	depends on X86_LOCAL_APIC
-	help
+	---help---
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
 
-choice
-	prompt "Subarchitecture Type"
-	default X86_PC
+config X86_BIGSMP
+	bool "Support for big SMP systems with more than 8 CPUs"
+	depends on X86_32 && SMP
+	---help---
+	  This option is needed for the systems that have more than 8 CPUs
 
-config X86_PC
-	bool "PC-compatible"
-	help
-	  Choose this option if your computer is a standard PC or compatible.
+config X86_EXTENDED_PLATFORM
+	bool "Support for extended (non-PC) x86 platforms"
+	default y
+	---help---
+	  If you disable this option then the kernel will only support
+	  standard PC platforms. (which covers the vast majority of
+	  systems out there.)
+
+	  If you enable this option then you'll be able to select a number
+	  of non-PC x86 platforms.
+
+	  If you have one of these systems, or if you want to build a
+	  generic distribution kernel, say Y here - otherwise say N.
+
+# This is an alphabetically sorted list of 64 bit extended platforms
+# Please maintain the alphabetic order if and when there are additions
+
+config X86_VSMP
+	bool "ScaleMP vSMP"
+	select PARAVIRT
+	depends on X86_64 && PCI
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
+	  supposed to run on these EM64T-based machines.  Only choose this option
+	  if you have one of these machines.
+
+config X86_UV
+	bool "SGI Ultraviolet"
+	depends on X86_64
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  This option is needed in order to support SGI Ultraviolet systems.
+	  If you don't have one of these, you should say N here.
+
+# Following is an alphabetically sorted list of 32 bit extended platforms
+# Please maintain the alphabetic order if and when there are additions
 
 config X86_ELAN
 	bool "AMD Elan"
 	depends on X86_32
-	help
+	depends on X86_EXTENDED_PLATFORM
+	---help---
 	  Select this for an AMD Elan processor.
 
 	  Do not use this option for K6/Athlon/Opteron processors!
 
 	  If unsure, choose "PC-compatible" instead.
 
-config X86_VOYAGER
-	bool "Voyager (NCR)"
-	depends on X86_32 && (SMP || BROKEN) && !PCI
-	help
-	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
-	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
-
-	  *** WARNING ***
-
-	  If you do not specifically know you have a Voyager based machine,
-	  say N here, otherwise the kernel you build will not be bootable.
-
-config X86_GENERICARCH
-       bool "Generic architecture"
+config X86_RDC321X
+	bool "RDC R-321x SoC"
 	depends on X86_32
-       help
-          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+	depends on X86_EXTENDED_PLATFORM
+	select M486
+	select X86_REBOOTFIXUPS
+	---help---
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
+config X86_32_NON_STANDARD
+	bool "Support non-standard 32-bit SMP architectures"
+	depends on X86_32 && SMP
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
 	  subarchitectures.  It is intended for a generic binary kernel.
 	  if you select them all, kernel will probe it one by one. and will
 	  fallback to default.
 
-if X86_GENERICARCH
+# Alphabetically sorted list of Non standard 32 bit platforms
 
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
-	depends on SMP && X86_32 && PCI && X86_MPPARSE
+	depends on X86_32_NON_STANDARD
 	select NUMA
-	help
+	select X86_MPPARSE
+	---help---
 	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
 	  NUMA multiquad box. This changes the way that processors are
 	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
 	  of Flat Logical.  You will need a new lynxer.elf file to flash your
 	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
-config X86_SUMMIT
-	bool "Summit/EXA (IBM x440)"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for IBM systems that use the Summit/EXA chipset.
-	  In particular, it is needed for the x440.
-
-config X86_ES7000
-	bool "Support for Unisys ES7000 IA32 series"
-	depends on X86_32 && SMP
-	help
-	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
-	  supposed to run on an IA32-based Unisys ES7000 system.
-
-config X86_BIGSMP
-	bool "Support for big SMP systems with more than 8 CPUs"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for the systems that have more than 8 CPUs
-	  and if the system is not of any sub-arch type above.
-
-endif
-
-config X86_VSMP
-	bool "Support for ScaleMP vSMP"
-	select PARAVIRT
-	depends on X86_64 && PCI
-	help
-	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
-	  supposed to run on these EM64T-based machines.  Only choose this option
-	  if you have one of these machines.
-
-endchoice
-
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
-	help
+	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
+	depends on X86_32_NON_STANDARD
+	---help---
 	  The SGI Visual Workstation series is an IA32-based workstation
 	  based on SGI systems chips with some legacy PC hardware attached.
 
@@ -381,28 +368,38 @@ config X86_VISWS
 	  A kernel compiled for the Visual Workstation will run on general
 	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
 
-config X86_RDC321X
-	bool "RDC R-321x SoC"
-	depends on X86_32
-	select M486
-	select X86_REBOOTFIXUPS
-	help
-	  This option is needed for RDC R-321x system-on-chip, also known
-	  as R-8610-(G).
-	  If you don't have one of these chips, you should say N here.
+config X86_SUMMIT
+	bool "Summit/EXA (IBM x440)"
+	depends on X86_32_NON_STANDARD
+	---help---
+	  This option is needed for IBM systems that use the Summit/EXA chipset.
+	  In particular, it is needed for the x440.
 
-config X86_UV
-	bool "SGI Ultraviolet"
-	depends on X86_64
-	help
-	  This option is needed in order to support SGI Ultraviolet systems.
-	  If you don't have one of these, you should say N here.
+config X86_ES7000
+	bool "Unisys ES7000 IA32 series"
+	depends on X86_32_NON_STANDARD && X86_BIGSMP
+	---help---
+	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
+	  supposed to run on an IA32-based Unisys ES7000 system.
+
+config X86_VOYAGER
+	bool "Voyager (NCR)"
+	depends on SMP && !PCI && BROKEN
+	depends on X86_32_NON_STANDARD
+	---help---
+	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
+	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
+
+	  *** WARNING ***
+
+	  If you do not specifically know you have a Voyager based machine,
+	  say N here, otherwise the kernel you build will not be bootable.
 
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
 	depends on X86
-	help
+	---help---
 	  Calculate simpler /proc/<PID>/wchan values. If this option
 	  is disabled then wchan values will recurse back to the
 	  caller function. This provides more accurate wchan values,
@@ -412,7 +409,7 @@ config SCHED_OMIT_FRAME_POINTER
 
 menuconfig PARAVIRT_GUEST
 	bool "Paravirtualized guest support"
-	help
+	---help---
 	  Say Y here to get to see options related to running Linux under
 	  various hypervisors.  This option alone does not add any kernel code.
 
@@ -426,8 +423,7 @@ config VMI
 	bool "VMI Guest support"
 	select PARAVIRT
 	depends on X86_32
-	depends on !X86_VOYAGER
-	help
+	---help---
 	  VMI provides a paravirtualized interface to the VMware ESX server
 	  (it could be used by other hypervisors in theory too, but is not
 	  at the moment), by linking the kernel to a GPL-ed ROM module
@@ -437,8 +433,7 @@ config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on !X86_VOYAGER
-	help
+	---help---
 	  Turning on this option will allow you to run a paravirtualized clock
 	  when running over the KVM hypervisor. Instead of relying on a PIT
 	  (or probably other) emulation by the underlying device model, the host
@@ -448,17 +443,15 @@ config KVM_CLOCK
 config KVM_GUEST
 	bool "KVM Guest support"
 	select PARAVIRT
-	depends on !X86_VOYAGER
-	help
-	 This option enables various optimizations for running under the KVM
-	 hypervisor.
+	---help---
+	  This option enables various optimizations for running under the KVM
+	  hypervisor.
 
 source "arch/x86/lguest/Kconfig"
 
 config PARAVIRT
 	bool "Enable paravirtualization code"
-	depends on !X86_VOYAGER
-	help
+	---help---
 	  This changes the kernel so it can modify itself when it is run
 	  under a hypervisor, potentially improving performance significantly
 	  over full virtualization.  However, when run without a hypervisor
@@ -471,51 +464,51 @@ config PARAVIRT_CLOCK
 endif
 
 config PARAVIRT_DEBUG
-       bool "paravirt-ops debugging"
-       depends on PARAVIRT && DEBUG_KERNEL
-       help
-         Enable to debug paravirt_ops internals.  Specifically, BUG if
-	 a paravirt_op is missing when it is called.
+	bool "paravirt-ops debugging"
+	depends on PARAVIRT && DEBUG_KERNEL
+	---help---
+	  Enable to debug paravirt_ops internals.  Specifically, BUG if
+	  a paravirt_op is missing when it is called.
 
 config MEMTEST
 	bool "Memtest"
-	help
+	---help---
 	  This option adds a kernel parameter 'memtest', which allows memtest
 	  to be set.
-		memtest=0, mean disabled; -- default
-		memtest=1, mean do 1 test pattern;
-		...
-		memtest=4, mean do 4 test patterns.
+	        memtest=0, mean disabled; -- default
+	        memtest=1, mean do 1 test pattern;
+	        ...
+	        memtest=4, mean do 4 test patterns.
 	  If you are unsure how to answer this question, answer N.
 
 config X86_SUMMIT_NUMA
 	def_bool y
-	depends on X86_32 && NUMA && X86_GENERICARCH
+	depends on X86_32 && NUMA && X86_32_NON_STANDARD
 
 config X86_CYCLONE_TIMER
 	def_bool y
-	depends on X86_GENERICARCH
+	depends on X86_32_NON_STANDARD
 
 source "arch/x86/Kconfig.cpu"
 
 config HPET_TIMER
 	def_bool X86_64
 	prompt "HPET Timer Support" if X86_32
-	help
-         Use the IA-PC HPET (High Precision Event Timer) to manage
-         time in preference to the PIT and RTC, if a HPET is
-         present.
-         HPET is the next generation timer replacing legacy 8254s.
-         The HPET provides a stable time base on SMP
-         systems, unlike the TSC, but it is more expensive to access,
-         as it is off-chip.  You can find the HPET spec at
-         <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
+	---help---
+	  Use the IA-PC HPET (High Precision Event Timer) to manage
+	  time in preference to the PIT and RTC, if a HPET is
+	  present.
+	  HPET is the next generation timer replacing legacy 8254s.
+	  The HPET provides a stable time base on SMP
+	  systems, unlike the TSC, but it is more expensive to access,
+	  as it is off-chip.  You can find the HPET spec at
+	  <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
 
-         You can safely choose Y here.  However, HPET will only be
-         activated if the platform and the BIOS support this feature.
-         Otherwise the 8254 will be used for timing services.
+	  You can safely choose Y here.  However, HPET will only be
+	  activated if the platform and the BIOS support this feature.
+	  Otherwise the 8254 will be used for timing services.
 
-         Choose N to continue using the legacy 8254 timer.
+	  Choose N to continue using the legacy 8254 timer.
 
 config HPET_EMULATE_RTC
 	def_bool y
@@ -526,7 +519,7 @@ config HPET_EMULATE_RTC
 config DMI
 	default y
 	bool "Enable DMI scanning" if EMBEDDED
-	help
+	---help---
 	  Enabled scanning of DMI to identify machine quirks. Say Y
 	  here unless you have verified that your setup is not
 	  affected by entries in the DMI blacklist. Required by PNP
@@ -538,7 +531,7 @@ config GART_IOMMU
 	select SWIOTLB
 	select AGP
 	depends on X86_64 && PCI
-	help
+	---help---
 	  Support for full DMA access of devices with 32bit memory access only
 	  on systems with more than 3GB. This is usually needed for USB,
 	  sound, many IDE/SATA chipsets and some other devices.
@@ -553,7 +546,7 @@ config CALGARY_IOMMU
 	bool "IBM Calgary IOMMU support"
 	select SWIOTLB
 	depends on X86_64 && PCI && EXPERIMENTAL
-	help
+	---help---
 	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
 	  systems. Needed to run systems with more than 3GB of memory
 	  properly with 32-bit PCI devices that do not support DAC
@@ -571,7 +564,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
 	def_bool y
 	prompt "Should Calgary be enabled by default?"
 	depends on CALGARY_IOMMU
-	help
+	---help---
 	  Should Calgary be enabled by default? if you choose 'y', Calgary
 	  will be used (if it exists). If you choose 'n', Calgary will not be
 	  used even if it exists. If you choose 'n' and would like to use
@@ -583,7 +576,7 @@ config AMD_IOMMU
 	select SWIOTLB
 	select PCI_MSI
 	depends on X86_64 && PCI && ACPI
-	help
+	---help---
 	  With this option you can enable support for AMD IOMMU hardware in
 	  your system. An IOMMU is a hardware component which provides
 	  remapping of DMA memory accesses from devices. With an AMD IOMMU you
@@ -598,7 +591,7 @@ config AMD_IOMMU_STATS
 	bool "Export AMD IOMMU statistics to debugfs"
 	depends on AMD_IOMMU
 	select DEBUG_FS
-	help
+	---help---
 	  This option enables code in the AMD IOMMU driver to collect various
 	  statistics about whats happening in the driver and exports that
 	  information to userspace via debugfs.
@@ -607,7 +600,7 @@ config AMD_IOMMU_STATS
 # need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
 	def_bool y if X86_64
-	help
+	---help---
 	  Support for software bounce buffers used on x86-64 systems
 	  which don't have a hardware IOMMU (e.g. the current generation
 	  of Intel's x86-64 CPUs). Using this PCI devices which can only
@@ -625,7 +618,7 @@ config MAXSMP
 	depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
 	select CPUMASK_OFFSTACK
 	default n
-	help
+	---help---
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
 
@@ -636,7 +629,7 @@ config NR_CPUS
 	default "4096" if MAXSMP
 	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
 	default "8" if SMP
-	help
+	---help---
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
@@ -647,7 +640,7 @@ config NR_CPUS
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
 	depends on X86_HT
-	help
+	---help---
 	  SMT scheduler support improves the CPU scheduler's decision making
 	  when dealing with Intel Pentium 4 chips with HyperThreading at a
 	  cost of slightly increased overhead in some places. If unsure say
@@ -657,7 +650,7 @@ config SCHED_MC
 	def_bool y
 	prompt "Multi-core scheduler support"
 	depends on X86_HT
-	help
+	---help---
 	  Multi-core scheduler support improves the CPU scheduler's decision
 	  making when dealing with multi-core CPU chips at a cost of slightly
 	  increased overhead in some places. If unsure say N here.
@@ -666,8 +659,8 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH)
-	help
+	depends on X86_32 && !SMP && !X86_32_NON_STANDARD
+	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
 	  system which has a processor with a local APIC, you can say Y here to
@@ -680,7 +673,7 @@ config X86_UP_APIC
 config X86_UP_IOAPIC
 	bool "IO-APIC support on uniprocessors"
 	depends on X86_UP_APIC
-	help
+	---help---
 	  An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
 	  SMP-capable replacement for PC-style interrupt controllers. Most
 	  SMP systems and many recent uniprocessor systems have one.
@@ -691,12 +684,12 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
+	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
 	select HAVE_PERF_COUNTERS if (!M386 && !M486)
 
 config X86_IO_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
+	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
 
 config X86_VISWS_APIC
 	def_bool y
@@ -706,7 +699,7 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
 	default n
 	depends on X86_IO_APIC
-	help
+	---help---
 	  This option enables a workaround that fixes a source of
 	  spurious interrupts. This is recommended when threaded
 	  interrupt handling is used on systems where the generation of
@@ -728,7 +721,6 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 
 config X86_MCE
 	bool "Machine Check Exception"
-	depends on !X86_VOYAGER
 	---help---
 	  Machine Check Exception support allows the processor to notify the
 	  kernel if it detects a problem (e.g. overheating, component failure).
@@ -747,7 +739,7 @@ config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	help
+	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
 
@@ -755,14 +747,14 @@ config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	help
+	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
 config X86_MCE_NONFATAL
 	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
 	depends on X86_32 && X86_MCE
-	help
+	---help---
 	  Enabling this feature starts a timer that triggers every 5 seconds which
 	  will look at the machine check registers to see if anything happened.
 	  Non-fatal problems automatically get corrected (but still logged).
@@ -775,7 +767,7 @@ config X86_MCE_NONFATAL
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
 	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
-	help
+	---help---
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
 
@@ -783,11 +775,11 @@ config VM86
 	bool "Enable VM86 support" if EMBEDDED
 	default y
 	depends on X86_32
-	help
-          This option is required by programs like DOSEMU to run 16-bit legacy
+	---help---
+	  This option is required by programs like DOSEMU to run 16-bit legacy
 	  code on X86 processors. It also may be needed by software like
-          XFree86 to initialize some video cards via BIOS. Disabling this
-          option saves about 6k.
+	  XFree86 to initialize some video cards via BIOS. Disabling this
+	  option saves about 6k.
 
 config TOSHIBA
 	tristate "Toshiba Laptop support"
@@ -861,33 +853,33 @@ config MICROCODE
 	  module will be called microcode.
 
 config MICROCODE_INTEL
-       bool "Intel microcode patch loading support"
-       depends on MICROCODE
-       default MICROCODE
-       select FW_LOADER
-       --help---
-         This options enables microcode patch loading support for Intel
-         processors.
-
-         For latest news and information on obtaining all the required
-         Intel ingredients for this driver, check:
-         <http://www.urbanmyth.org/microcode/>.
+	bool "Intel microcode patch loading support"
+	depends on MICROCODE
+	default MICROCODE
+	select FW_LOADER
+	---help---
+	  This options enables microcode patch loading support for Intel
+	  processors.
+
+	  For latest news and information on obtaining all the required
+	  Intel ingredients for this driver, check:
+	  <http://www.urbanmyth.org/microcode/>.
 
 config MICROCODE_AMD
-       bool "AMD microcode patch loading support"
-       depends on MICROCODE
-       select FW_LOADER
-       --help---
-         If you select this option, microcode patch loading support for AMD
-	 processors will be enabled.
+	bool "AMD microcode patch loading support"
+	depends on MICROCODE
+	select FW_LOADER
+	---help---
+	  If you select this option, microcode patch loading support for AMD
+	  processors will be enabled.
 
-   config MICROCODE_OLD_INTERFACE
+config MICROCODE_OLD_INTERFACE
 	def_bool y
 	depends on MICROCODE
 
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
-	help
+	---help---
 	  This device gives privileged processes access to the x86
 	  Model-Specific Registers (MSRs).  It is a character device with
 	  major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
@@ -896,7 +888,7 @@ config X86_MSR
 
 config X86_CPUID
 	tristate "/dev/cpu/*/cpuid - CPU information support"
-	help
+	---help---
 	  This device gives processes access to the x86 CPUID instruction to
 	  be executed on a specific processor.  It is a character device
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
@@ -948,7 +940,7 @@ config NOHIGHMEM
 config HIGHMEM4G
 	bool "4GB"
 	depends on !X86_NUMAQ
-	help
+	---help---
 	  Select this if you have a 32-bit processor and between 1 and 4
 	  gigabytes of physical RAM.
 
@@ -956,7 +948,7 @@ config HIGHMEM64G
 	bool "64GB"
 	depends on !M386 && !M486
 	select X86_PAE
-	help
+	---help---
 	  Select this if you have a 32-bit processor and more than 4
 	  gigabytes of physical RAM.
 
@@ -967,7 +959,7 @@ choice
 	prompt "Memory split" if EMBEDDED
 	default VMSPLIT_3G
 	depends on X86_32
-	help
+	---help---
 	  Select the desired split between kernel and user memory.
 
 	  If the address range available to the kernel is less than the
@@ -1013,20 +1005,20 @@ config HIGHMEM
 config X86_PAE
 	bool "PAE (Physical Address Extension) Support"
 	depends on X86_32 && !HIGHMEM4G
-	help
+	---help---
 	  PAE is required for NX support, and furthermore enables
 	  larger swapspace support for non-overcommit purposes. It
 	  has the cost of more pagetable lookup overhead, and also
 	  consumes more pagetable space per process.
 
 config ARCH_PHYS_ADDR_T_64BIT
-       def_bool X86_64 || X86_PAE
+	def_bool X86_64 || X86_PAE
 
 config DIRECT_GBPAGES
 	bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
 	default y
 	depends on X86_64
-	help
+	---help---
 	  Allow the kernel linear mapping to use 1GB pages on CPUs that
 	  support it. This can improve the kernel's performance a tiny bit by
 	  reducing TLB pressure. If in doubt, say "Y".
@@ -1036,9 +1028,8 @@ config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"
 	depends on SMP
 	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
-	default n if X86_PC
 	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
-	help
+	---help---
 	  Enable NUMA (Non Uniform Memory Access) support.
 
 	  The kernel will try to allocate memory used by a CPU on the
@@ -1061,19 +1052,19 @@ config K8_NUMA
 	def_bool y
 	prompt "Old style AMD Opteron NUMA detection"
 	depends on X86_64 && NUMA && PCI
-	help
-	 Enable K8 NUMA node topology detection.  You should say Y here if
-	 you have a multi processor AMD K8 system. This uses an old
-	 method to read the NUMA configuration directly from the builtin
-	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
-	 instead, which also takes priority if both are compiled in.
+	---help---
+	  Enable K8 NUMA node topology detection.  You should say Y here if
+	  you have a multi processor AMD K8 system. This uses an old
+	  method to read the NUMA configuration directly from the builtin
+	  Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
+	  instead, which also takes priority if both are compiled in.
 
 config X86_64_ACPI_NUMA
 	def_bool y
 	prompt "ACPI NUMA detection"
 	depends on X86_64 && NUMA && ACPI && PCI
 	select ACPI_NUMA
-	help
+	---help---
 	  Enable ACPI SRAT based node topology detection.
 
 # Some NUMA nodes have memory ranges that span
@@ -1088,7 +1079,7 @@ config NODES_SPAN_OTHER_NODES
 config NUMA_EMU
 	bool "NUMA emulation"
 	depends on X86_64 && NUMA
-	help
+	---help---
 	  Enable NUMA emulation. A flat machine will be split
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
@@ -1101,7 +1092,7 @@ config NODES_SHIFT
 	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
-	help
+	---help---
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
 
@@ -1139,7 +1130,7 @@ config ARCH_SPARSEMEM_DEFAULT
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
-	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH
+	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
 	select SPARSEMEM_STATIC if X86_32
 	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
@@ -1156,61 +1147,61 @@ source "mm/Kconfig"
 config HIGHPTE
 	bool "Allocate 3rd-level pagetables from highmem"
 	depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
-	help
+	---help---
 	  The VM uses one page table entry for each page of physical memory.
 	  For systems with a lot of RAM, this can be wasteful of precious
 	  low memory.  Setting this option will put user-space page table
 	  entries in high memory.
 
 config X86_CHECK_BIOS_CORRUPTION
-        bool "Check for low memory corruption"
-	help
-	 Periodically check for memory corruption in low memory, which
-	 is suspected to be caused by BIOS.  Even when enabled in the
-	 configuration, it is disabled at runtime.  Enable it by
-	 setting "memory_corruption_check=1" on the kernel command
-	 line.  By default it scans the low 64k of memory every 60
-	 seconds; see the memory_corruption_check_size and
-	 memory_corruption_check_period parameters in
-	 Documentation/kernel-parameters.txt to adjust this.
-
-	 When enabled with the default parameters, this option has
-	 almost no overhead, as it reserves a relatively small amount
-	 of memory and scans it infrequently.  It both detects corruption
-	 and prevents it from affecting the running system.
-
-	 It is, however, intended as a diagnostic tool; if repeatable
-	 BIOS-originated corruption always affects the same memory,
-	 you can use memmap= to prevent the kernel from using that
-	 memory.
+	bool "Check for low memory corruption"
+	---help---
+	  Periodically check for memory corruption in low memory, which
+	  is suspected to be caused by BIOS.  Even when enabled in the
+	  configuration, it is disabled at runtime.  Enable it by
+	  setting "memory_corruption_check=1" on the kernel command
+	  line.  By default it scans the low 64k of memory every 60
+	  seconds; see the memory_corruption_check_size and
+	  memory_corruption_check_period parameters in
+	  Documentation/kernel-parameters.txt to adjust this.
+
+	  When enabled with the default parameters, this option has
+	  almost no overhead, as it reserves a relatively small amount
+	  of memory and scans it infrequently.  It both detects corruption
+	  and prevents it from affecting the running system.
+
+	  It is, however, intended as a diagnostic tool; if repeatable
+	  BIOS-originated corruption always affects the same memory,
+	  you can use memmap= to prevent the kernel from using that
+	  memory.
 
 config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
-        bool "Set the default setting of memory_corruption_check"
+	bool "Set the default setting of memory_corruption_check"
 	depends on X86_CHECK_BIOS_CORRUPTION
 	default y
-	help
-	 Set whether the default state of memory_corruption_check is
-	 on or off.
+	---help---
+	  Set whether the default state of memory_corruption_check is
+	  on or off.
 
 config X86_RESERVE_LOW_64K
-        bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+	bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
 	default y
-	help
-	 Reserve the first 64K of physical RAM on BIOSes that are known
-	 to potentially corrupt that memory range. A numbers of BIOSes are
-	 known to utilize this area during suspend/resume, so it must not
-	 be used by the kernel.
+	---help---
+	  Reserve the first 64K of physical RAM on BIOSes that are known
+	  to potentially corrupt that memory range. A numbers of BIOSes are
+	  known to utilize this area during suspend/resume, so it must not
+	  be used by the kernel.
 
-	 Set this to N if you are absolutely sure that you trust the BIOS
-	 to get all its memory reservations and usages right.
+	  Set this to N if you are absolutely sure that you trust the BIOS
+	  to get all its memory reservations and usages right.
 
-	 If you have doubts about the BIOS (e.g. suspend/resume does not
-	 work or there's kernel crashes after certain hardware hotplug
-	 events) and it's not AMI or Phoenix, then you might want to enable
-	 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
-	 corruption patterns.
+	  If you have doubts about the BIOS (e.g. suspend/resume does not
+	  work or there's kernel crashes after certain hardware hotplug
+	  events) and it's not AMI or Phoenix, then you might want to enable
+	  X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+	  corruption patterns.
 
-	 Say Y if unsure.
+	  Say Y if unsure.
 
 config MATH_EMULATION
 	bool
@@ -1276,7 +1267,7 @@ config MTRR_SANITIZER
 	def_bool y
 	prompt "MTRR cleanup support"
 	depends on MTRR
-	help
+	---help---
 	  Convert MTRR layout from continuous to discrete, so X drivers can
 	  add writeback entries.
 
@@ -1291,7 +1282,7 @@ config MTRR_SANITIZER_ENABLE_DEFAULT
 	range 0 1
 	default "0"
 	depends on MTRR_SANITIZER
-	help
+	---help---
 	  Enable mtrr cleanup default value
 
 config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
@@ -1299,7 +1290,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
 	range 0 7
 	default "1"
 	depends on MTRR_SANITIZER
-	help
+	---help---
 	  mtrr cleanup spare entries default, it can be changed via
 	  mtrr_spare_reg_nr=N on the kernel command line.
 
@@ -1307,7 +1298,7 @@ config X86_PAT
 	bool
 	prompt "x86 PAT support"
 	depends on MTRR
-	help
+	---help---
 	  Use PAT attributes to setup page level cache control.
 
 	  PATs are the modern equivalents of MTRRs and are much more
@@ -1322,20 +1313,20 @@ config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
 	---help---
-	This enables the kernel to use EFI runtime services that are
-	available (such as the EFI variable services).
+	  This enables the kernel to use EFI runtime services that are
+	  available (such as the EFI variable services).
 
-	This option is only useful on systems that have EFI firmware.
-  	In addition, you should use the latest ELILO loader available
-  	at <http://elilo.sourceforge.net> in order to take advantage
-  	of EFI runtime services. However, even with this option, the
-  	resultant kernel should continue to boot on existing non-EFI
-  	platforms.
+	  This option is only useful on systems that have EFI firmware.
+	  In addition, you should use the latest ELILO loader available
+	  at <http://elilo.sourceforge.net> in order to take advantage
+	  of EFI runtime services. However, even with this option, the
+	  resultant kernel should continue to boot on existing non-EFI
+	  platforms.
 
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"
-	help
+	---help---
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to
@@ -1353,10 +1344,9 @@ config CC_STACKPROTECTOR_ALL
 
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on X86_64
 	select CC_STACKPROTECTOR_ALL
-	help
-          This option turns on the -fstack-protector GCC feature. This
+	---help---
+	  This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
 	  the stack just before the return address, and validates
 	  the value just before actually returning.  Stack based buffer
@@ -1373,8 +1363,7 @@ source kernel/Kconfig.hz
 
 config KEXEC
 	bool "kexec system call"
-	depends on X86_BIOS_REBOOT
-	help
+	---help---
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but it is independent of the system firmware.   And like a reboot
@@ -1391,7 +1380,7 @@ config KEXEC
 config CRASH_DUMP
 	bool "kernel crash dumps"
 	depends on X86_64 || (X86_32 && HIGHMEM)
-	help
+	---help---
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
 	  which are loaded in the main kernel with kexec-tools into
@@ -1406,7 +1395,7 @@ config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	depends on KEXEC && HIBERNATION && X86_32
-	help
+	---help---
 	  Jump between original kernel and kexeced kernel and invoke
 	  code in physical address mode via KEXEC
 
@@ -1415,7 +1404,7 @@ config PHYSICAL_START
 	default "0x1000000" if X86_NUMAQ
 	default "0x200000" if X86_64
 	default "0x100000"
-	help
+	---help---
 	  This gives the physical address where the kernel is loaded.
 
 	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
@@ -1456,7 +1445,7 @@ config PHYSICAL_START
 config RELOCATABLE
 	bool "Build a relocatable kernel (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	help
+	---help---
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
 	  The relocations tend to make the kernel binary about 10% larger,
@@ -1476,7 +1465,7 @@ config PHYSICAL_ALIGN
 	default "0x100000" if X86_32
 	default "0x200000" if X86_64
 	range 0x2000 0x400000
-	help
+	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an
 	  address which meets above alignment restriction.
@@ -1497,7 +1486,7 @@ config PHYSICAL_ALIGN
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
-	depends on SMP && HOTPLUG && !X86_VOYAGER
+	depends on SMP && HOTPLUG
 	---help---
 	  Say Y here to allow turning CPUs off and on. CPUs can be
 	  controlled through /sys/devices/system/cpu.
@@ -1509,7 +1498,7 @@ config COMPAT_VDSO
 	def_bool y
 	prompt "Compat VDSO support"
 	depends on X86_32 || IA32_EMULATION
-	help
+	---help---
 	  Map the 32-bit VDSO to the predictable old-style address too.
 	---help---
 	  Say N here if you are running a sufficiently recent glibc
@@ -1521,7 +1510,7 @@ config COMPAT_VDSO
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n
-	help
+	---help---
 	  Allow for specifying boot arguments to the kernel at
 	  build time.  On some systems (e.g. embedded ones), it is
 	  necessary or convenient to provide some or all of the
@@ -1539,7 +1528,7 @@ config CMDLINE
 	string "Built-in kernel command string"
 	depends on CMDLINE_BOOL
 	default ""
-	help
+	---help---
 	  Enter arguments here that should be compiled into the kernel
 	  image and used at boot time.  If the boot loader provides a
 	  command line at boot time, it is appended to this string to
@@ -1556,7 +1545,7 @@ config CMDLINE_OVERRIDE
 	bool "Built-in command line overrides boot loader arguments"
 	default n
 	depends on CMDLINE_BOOL
-	help
+	---help---
 	  Set this option to 'Y' to have the kernel ignore the boot loader
 	  command line, and use ONLY the built-in command line.
 
@@ -1578,7 +1567,6 @@ config HAVE_ARCH_EARLY_PFN_TO_NID
 	depends on NUMA
 
 menu "Power management and ACPI options"
-	depends on !X86_VOYAGER
 
 config ARCH_HIBERNATION_HEADER
 	def_bool y
@@ -1656,7 +1644,7 @@ if APM
 
 config APM_IGNORE_USER_SUSPEND
 	bool "Ignore USER SUSPEND"
-	help
+	---help---
 	  This option will ignore USER SUSPEND requests. On machines with a
 	  compliant APM BIOS, you want to say N. However, on the NEC Versa M
 	  series notebooks, it is necessary to say Y because of a BIOS bug.
@@ -1680,7 +1668,7 @@ config APM_DO_ENABLE
 
 config APM_CPU_IDLE
 	bool "Make CPU Idle calls when idle"
-	help
+	---help---
 	  Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
 	  On some machines, this can activate improved power savings, such as
 	  a slowed CPU clock rate, when the machine is idle. These idle calls
@@ -1691,7 +1679,7 @@ config APM_CPU_IDLE
 
 config APM_DISPLAY_BLANK
 	bool "Enable console blanking using APM"
-	help
+	---help---
 	  Enable console blanking using the APM. Some laptops can use this to
 	  turn off the LCD backlight when the screen blanker of the Linux
 	  virtual console blanks the screen. Note that this is only used by
@@ -1704,7 +1692,7 @@ config APM_DISPLAY_BLANK
 
 config APM_ALLOW_INTS
 	bool "Allow interrupts during APM BIOS calls"
-	help
+	---help---
 	  Normally we disable external interrupts while we are making calls to
 	  the APM BIOS as a measure to lessen the effects of a badly behaving
 	  BIOS implementation.  The BIOS should reenable interrupts if it
@@ -1729,7 +1717,7 @@ config PCI
 	bool "PCI support"
 	default y
 	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
-	help
+	---help---
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
@@ -1800,7 +1788,7 @@ config PCI_MMCONFIG
 config DMAR
 	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
 	depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
-	help
+	---help---
 	  DMA remapping (DMAR) devices support enables independent address
 	  translations for Direct Memory Access (DMA) from devices.
 	  These DMA remapping devices are reported via ACPI tables
@@ -1822,29 +1810,29 @@ config DMAR_GFX_WA
 	def_bool y
 	prompt "Support for Graphics workaround"
 	depends on DMAR
-	help
-	 Current Graphics drivers tend to use physical address
-	 for DMA and avoid using DMA APIs. Setting this config
-	 option permits the IOMMU driver to set a unity map for
-	 all the OS-visible memory. Hence the driver can continue
-	 to use physical addresses for DMA.
+	---help---
+	  Current Graphics drivers tend to use physical address
+	  for DMA and avoid using DMA APIs. Setting this config
+	  option permits the IOMMU driver to set a unity map for
+	  all the OS-visible memory. Hence the driver can continue
+	  to use physical addresses for DMA.
 
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
-	help
-	 Floppy disk drivers are know to bypass DMA API calls
-	 thereby failing to work when IOMMU is enabled. This
-	 workaround will setup a 1:1 mapping for the first
-	 16M to make floppy (an ISA device) work.
+	---help---
+	  Floppy disk drivers are know to bypass DMA API calls
+	  thereby failing to work when IOMMU is enabled. This
+	  workaround will setup a 1:1 mapping for the first
+	  16M to make floppy (an ISA device) work.
 
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
 	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
-	help
-	 Supports Interrupt remapping for IO-APIC and MSI devices.
-	 To use x2apic mode in the CPU's which support x2APIC enhancements or
-	 to support platforms with CPU's having > 8 bit APIC ID, say Y.
+	---help---
+	  Supports Interrupt remapping for IO-APIC and MSI devices.
+	  To use x2apic mode in the CPU's which support x2APIC enhancements or
+	  to support platforms with CPU's having > 8 bit APIC ID, say Y.
 
 source "drivers/pci/pcie/Kconfig"
 
@@ -1858,8 +1846,7 @@ if X86_32
 
 config ISA
 	bool "ISA support"
-	depends on !X86_VOYAGER
-	help
+	---help---
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
 	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
@@ -1885,9 +1872,8 @@ config EISA
 source "drivers/eisa/Kconfig"
 
 config MCA
-	bool "MCA support" if !X86_VOYAGER
-	default y if X86_VOYAGER
-	help
+	bool "MCA support"
+	---help---
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
 	  laptops.  It is a bus system similar to PCI or ISA. See
 	  <file:Documentation/mca.txt> (and especially the web page given
@@ -1897,8 +1883,7 @@ source "drivers/mca/Kconfig"
 
 config SCx200
 	tristate "NatSemi SCx200 support"
-	depends on !X86_VOYAGER
-	help
+	---help---
 	  This provides basic support for National Semiconductor's
 	  (now AMD's) Geode processors.  The driver probes for the
 	  PCI-IDs of several on-chip devices, so its a good dependency
@@ -1910,7 +1895,7 @@ config SCx200HR_TIMER
 	tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
 	depends on SCx200 && GENERIC_TIME
 	default y
-	help
+	---help---
 	  This driver provides a clocksource built upon the on-chip
 	  27MHz high-resolution timer.  Its also a workaround for
 	  NSC Geode SC-1100's buggy TSC, which loses time when the
@@ -1921,7 +1906,7 @@ config GEODE_MFGPT_TIMER
 	def_bool y
 	prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
 	depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
-	help
+	---help---
 	  This driver provides a clock event source based on the MFGPT
 	  timer(s) in the CS5535 and CS5536 companion chip for the geode.
 	  MFGPTs have a better resolution and max interval than the
@@ -1930,7 +1915,7 @@ config GEODE_MFGPT_TIMER
 config OLPC
 	bool "One Laptop Per Child support"
 	default n
-	help
+	---help---
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
 
@@ -1955,16 +1940,16 @@ config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
 	select COMPAT_BINFMT_ELF
-	help
+	---help---
 	  Include code to run 32-bit programs under a 64-bit kernel. You should
 	  likely turn this on, unless you're 100% sure that you don't have any
 	  32-bit programs left.
 
 config IA32_AOUT
-       tristate "IA32 a.out support"
-       depends on IA32_EMULATION
-       help
-         Support old a.out binaries in the 32bit emulation.
+	tristate "IA32 a.out support"
+	depends on IA32_EMULATION
+	---help---
+	  Support old a.out binaries in the 32bit emulation.
 
 config COMPAT
 	def_bool y

arch/x86/Kconfig.cpu

@@ -50,7 +50,7 @@ config M386
 config M486
 	bool "486"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a 486 series processor, either Intel or one of the
 	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
 	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
@@ -59,7 +59,7 @@ config M486
 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
 	  assume the RDTSC (Read Time Stamp Counter) instruction.
@@ -67,21 +67,21 @@ config M586
 config M586TSC
 	bool "Pentium-Classic"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.
 
 config M586MMX
 	bool "Pentium-MMX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.
 
 config M686
 	bool "Pentium-Pro"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
 	  against the f00f bug found in earlier Pentiums.
@@ -89,7 +89,7 @@ config M686
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
 	  copy optimization, compiles the kernel with optimization flags
@@ -99,7 +99,7 @@ config MPENTIUMII
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
 	  extended prefetch instructions in addition to the Pentium II
@@ -108,14 +108,14 @@ config MPENTIUMIII
 config MPENTIUMM
 	bool "Pentium M"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 
 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
 	  Pentium-4 M (not Pentium M) chips.  This option enables compile
@@ -151,7 +151,7 @@ config MPENTIUM4
 config MK6
 	bool "K6/K6-II/K6-III"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
@@ -159,14 +159,14 @@ config MK6
 config MK7
 	bool "Athlon/Duron/K7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
 
 config MK8
 	bool "Opteron/Athlon64/Hammer/K8"
-	help
+	---help---
 	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.
 	  Enables use of some extended instructions, and passes appropriate
 	  optimization flags to GCC.
@@ -174,7 +174,7 @@ config MK8
 config MCRUSOE
 	bool "Crusoe"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
 	  Pentium Pro with no alignment requirements).
@@ -182,13 +182,13 @@ config MCRUSOE
 config MEFFICEON
 	bool "Efficeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Efficeon processor.
 
 config MWINCHIPC6
 	bool "Winchip-C6"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.
@@ -196,7 +196,7 @@ config MWINCHIPC6
 config MWINCHIP3D
 	bool "Winchip-2/Winchip-2A/Winchip-3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip-2, 2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.  Also enable out of order memory
@@ -206,19 +206,19 @@ config MWINCHIP3D
 config MGEODEGX1
 	bool "GeodeGX1"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
 	bool "Geode GX/LX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
 	  it lacks the cmov extension which gcc assumes is present when
@@ -230,7 +230,7 @@ config MCYRIXIII
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
 	  Note, this kernel will not boot on older (pre model 9) C3s.
@@ -238,14 +238,14 @@ config MVIAC3_2
 config MVIAC7
 	bool "VIA C7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.
 
 config MPSC
 	bool "Intel P4 / older Netburst based Xeon"
 	depends on X86_64
-	help
+	---help---
 	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
 	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
 	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
@@ -255,7 +255,7 @@ config MPSC
 
 config MCORE2
 	bool "Core 2/newer Xeon"
-	help
+	---help---
 
 	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
 	  53xx) CPUs. You can distinguish newer from older Xeons by the CPU
@@ -265,7 +265,7 @@ config MCORE2
 config GENERIC_CPU
 	bool "Generic-x86-64"
 	depends on X86_64
-	help
+	---help---
 	  Generic x86-64 CPU.
 	  Run equally well on all x86-64 CPUs.
 
@@ -274,7 +274,7 @@ endchoice
 config X86_GENERIC
 	bool "Generic x86 support"
 	depends on X86_32
-	help
+	---help---
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@@ -319,7 +319,7 @@ config X86_XADD
 config X86_PPRO_FENCE
 	bool "PentiumPro memory ordering errata workaround"
 	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	help
+	---help---
 	  Old PentiumPro multiprocessor systems had errata that could cause
 	  memory operations to violate the x86 ordering standard in rare cases.
 	  Enabling this option will attempt to work around some (but not all)
@@ -412,14 +412,14 @@ config X86_DEBUGCTLMSR
 
 menuconfig PROCESSOR_SELECT
 	bool "Supported processor vendors" if EMBEDDED
-	help
+	---help---
 	  This lets you choose what x86 vendor support code your kernel
 	  will include.
 
 config CPU_SUP_INTEL
 	default y
 	bool "Support Intel processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Intel processors
 
 	  You need this enabled if you want your kernel to run on an
@@ -433,7 +433,7 @@ config CPU_SUP_CYRIX_32
 	default y
 	bool "Support Cyrix processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Cyrix processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -446,7 +446,7 @@ config CPU_SUP_CYRIX_32
 config CPU_SUP_AMD
 	default y
 	bool "Support AMD processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for AMD processors
 
 	  You need this enabled if you want your kernel to run on an
@@ -460,7 +460,7 @@ config CPU_SUP_CENTAUR_32
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -474,7 +474,7 @@ config CPU_SUP_CENTAUR_64
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on 64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -488,7 +488,7 @@ config CPU_SUP_TRANSMETA_32
 	default y
 	bool "Support Transmeta processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Transmeta processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -502,7 +502,7 @@ config CPU_SUP_UMC_32
 	default y
 	bool "Support UMC processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for UMC processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -521,7 +521,7 @@ config X86_PTRACE_BTS
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
-	help
+	---help---
 	  This adds a ptrace interface to the hardware's branch trace store.
 
 	  Debuggers may use it to collect an execution trace of the debugged

arch/x86/Kconfig.debug

@@ -7,7 +7,7 @@ source "lib/Kconfig.debug"
 
 config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
-	help
+	---help---
 	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
@@ -25,7 +25,7 @@ config STRICT_DEVMEM
 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y
-	help
+	---help---
 	  Enables the informational output from the decompression stage
 	  (e.g. bzImage) of the boot. If you disable this you will still
 	  see errors. Disable this if you want silent bootup.
@@ -33,7 +33,7 @@ config X86_VERBOSE_BOOTUP
 config EARLY_PRINTK
 	bool "Early printk" if EMBEDDED
 	default y
-	help
+	---help---
 	  Write kernel log output directly into the VGA buffer or to a serial
 	  port.
 
@@ -47,7 +47,7 @@ config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	default n
 	depends on EARLY_PRINTK && PCI
-	help
+	---help---
 	  Write kernel log output directly into the EHCI debug port.
 
 	  This is useful for kernel debugging when your machine crashes very
@@ -59,14 +59,14 @@ config EARLY_PRINTK_DBGP
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit.
 
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Enables the display of the minimum amount of free stack which each
 	  task has ever had available in the sysrq-T and sysrq-P debug output.
 
@@ -75,7 +75,7 @@ config DEBUG_STACK_USAGE
 config DEBUG_PAGEALLOC
 	bool "Debug page memory allocations"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
 	  of memory corruptions.
@@ -83,9 +83,9 @@ config DEBUG_PAGEALLOC
 config DEBUG_PER_CPU_MAPS
 	bool "Debug access to per_cpu maps"
 	depends on DEBUG_KERNEL
-	depends on X86_SMP
+	depends on SMP
 	default n
-	help
+	---help---
 	  Say Y to verify that the per_cpu map being accessed has
 	  been setup.  Adds a fair amount of code to kernel memory
 	  and decreases performance.
@@ -96,7 +96,7 @@ config X86_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	select DEBUG_FS
-	help
+	---help---
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -108,7 +108,7 @@ config DEBUG_RODATA
 	bool "Write protect kernel read-only data structures"
 	default y
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Mark the kernel read-only data as write-protected in the pagetables,
 	  in order to catch accidental (and incorrect) writes to such const
 	  data. This is recommended so that we can catch kernel bugs sooner.
@@ -118,7 +118,7 @@ config DEBUG_RODATA_TEST
 	bool "Testcase for the DEBUG_RODATA feature"
 	depends on DEBUG_RODATA
 	default y
-	help
+	---help---
 	  This option enables a testcase for the DEBUG_RODATA
 	  feature as well as for the change_page_attr() infrastructure.
 	  If in doubt, say "N"
@@ -126,7 +126,7 @@ config DEBUG_RODATA_TEST
 config DEBUG_NX_TEST
 	tristate "Testcase for the NX non-executable stack feature"
 	depends on DEBUG_KERNEL && m
-	help
+	---help---
 	  This option enables a testcase for the CPU NX capability
 	  and the software setup of this feature.
 	  If in doubt, say "N"
@@ -134,7 +134,7 @@ config DEBUG_NX_TEST
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on X86_32
-	help
+	---help---
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
 	  running more threads on a system and also reduces the pressure
@@ -145,7 +145,7 @@ config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
 	depends on X86_32
-	help
+	---help---
 	  This option allows trapping of rare doublefault exceptions that
 	  would otherwise cause a system to silently reboot. Disabling this
 	  option saves about 4k and might cause you much additional grey
@@ -155,7 +155,7 @@ config IOMMU_DEBUG
 	bool "Enable IOMMU debugging"
 	depends on GART_IOMMU && DEBUG_KERNEL
 	depends on X86_64
-	help
+	---help---
 	  Force the IOMMU to on even when you have less than 4GB of
 	  memory and add debugging code. On overflow always panic. And
 	  allow to enable IOMMU leak tracing. Can be disabled at boot
@@ -171,7 +171,7 @@ config IOMMU_LEAK
 	bool "IOMMU leak tracing"
 	depends on DEBUG_KERNEL
 	depends on IOMMU_DEBUG
-	help
+	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
@@ -224,25 +224,25 @@ choice
 
 config IO_DELAY_0X80
 	bool "port 0x80 based port-IO delay [recommended]"
-	help
+	---help---
 	  This is the traditional Linux IO delay used for in/out_p.
 	  It is the most tested hence safest selection here.
 
 config IO_DELAY_0XED
 	bool "port 0xed based port-IO delay"
-	help
+	---help---
 	  Use port 0xed as the IO delay. This frees up port 0x80 which is
 	  often used as a hardware-debug port.
 
 config IO_DELAY_UDELAY
 	bool "udelay based port-IO delay"
-	help
+	---help---
 	  Use udelay(2) as the IO delay method. This provides the delay
 	  while not having any side-effect on the IO port space.
 
 config IO_DELAY_NONE
 	bool "no port-IO delay"
-	help
+	---help---
 	  No port-IO delay. Will break on old boxes that require port-IO
 	  delay for certain operations. Should work on most new machines.
 
@@ -276,18 +276,18 @@ config DEBUG_BOOT_PARAMS
 	bool "Debug boot parameters"
 	depends on DEBUG_KERNEL
 	depends on DEBUG_FS
-	help
+	---help---
 	  This option will cause struct boot_params to be exported via debugfs.
 
 config CPA_DEBUG
 	bool "CPA self-test code"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Do change_page_attr() self-tests every 30 seconds.
 
 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
-	help
+	---help---
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
 	  do what it thinks is best, which is desirable for the gcc 3.x series of
@@ -300,4 +300,3 @@ config OPTIMIZE_INLINING
 	  If unsure, say N.
 
 endmenu
-

arch/x86/Makefile

@@ -70,14 +70,17 @@ else
         # this works around some issues with generating unwind tables in older gccs
         # newer gccs do it by default
         KBUILD_CFLAGS += -maccumulate-outgoing-args
+endif
 
-        stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
-        stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
-                "$(CC)" "-fstack-protector -DGCC_HAS_SP" )
-        stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
-                "$(CC)" -fstack-protector-all )
-
-        KBUILD_CFLAGS += $(stackp-y)
+ifdef CONFIG_CC_STACKPROTECTOR
+	cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
+        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
+                stackp-y := -fstack-protector
+                stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
+                KBUILD_CFLAGS += $(stackp-y)
+        else
+                $(warning stack protector enabled but no compiler support)
+        endif
 endif
 
 # Stackpointer is addressed different for 32 bit and 64 bit x86
@@ -102,29 +105,6 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
 # prevent gcc from generating any FP code by mistake
 KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
 
-###
-# Sub architecture support
-# fcore-y is linked before mcore-y files.
-
-# Default subarch .c files
-mcore-y  := arch/x86/mach-default/
-
-# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER)	:= -Iarch/x86/include/asm/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
-
-# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH):= -Iarch/x86/include/asm/mach-generic
-fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
-mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
-
-# default subarch .h files
-mflags-y += -Iarch/x86/include/asm/mach-default
-
-# 64 bit does not support subarch support - clear sub arch variables
-fcore-$(CONFIG_X86_64)  :=
-mcore-$(CONFIG_X86_64)  :=
-
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
@@ -150,9 +130,6 @@ core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
 core-y += arch/x86/kernel/
 core-y += arch/x86/mm/
 
-# Remaining sub architecture files
-core-y += $(mcore-y)
-
 core-y += arch/x86/crypto/
 core-y += arch/x86/vdso/
 core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/

arch/x86/boot/a20.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -15,16 +16,23 @@
 #include "boot.h"
 
 #define MAX_8042_LOOPS	100000
+#define MAX_8042_FF	32
 
 static int empty_8042(void)
 {
 	u8 status;
 	int loops = MAX_8042_LOOPS;
+	int ffs   = MAX_8042_FF;
 
 	while (loops--) {
 		io_delay();
 
 		status = inb(0x64);
+		if (status == 0xff) {
+			/* FF is a plausible, but very unlikely status */
+			if (!--ffs)
+				return -1; /* Assume no KBC present */
+		}
 		if (status & 1) {
 			/* Read and discard input data */
 			io_delay();
@@ -118,44 +126,43 @@ static void enable_a20_fast(void)
 
 int enable_a20(void)
 {
-#if defined(CONFIG_X86_ELAN)
-	/* Elan croaks if we try to touch the KBC */
-	enable_a20_fast();
-	while (!a20_test_long())
-		;
-	return 0;
-#elif defined(CONFIG_X86_VOYAGER)
+#ifdef CONFIG_X86_VOYAGER
 	/* On Voyager, a20_test() is unsafe? */
 	enable_a20_kbc();
 	return 0;
 #else
        int loops = A20_ENABLE_LOOPS;
-	while (loops--) {
-		/* First, check to see if A20 is already enabled
-		   (legacy free, etc.) */
-		if (a20_test_short())
-			return 0;
-
-		/* Next, try the BIOS (INT 0x15, AX=0x2401) */
-		enable_a20_bios();
-		if (a20_test_short())
-			return 0;
-
-		/* Try enabling A20 through the keyboard controller */
-		empty_8042();
-		if (a20_test_short())
-			return 0; /* BIOS worked, but with delayed reaction */
-
-		enable_a20_kbc();
-		if (a20_test_long())
-			return 0;
-
-		/* Finally, try enabling the "fast A20 gate" */
-		enable_a20_fast();
-		if (a20_test_long())
-			return 0;
-	}
-
-	return -1;
+       int kbc_err;
+
+       while (loops--) {
+	       /* First, check to see if A20 is already enabled
+		  (legacy free, etc.) */
+	       if (a20_test_short())
+		       return 0;
+	       
+	       /* Next, try the BIOS (INT 0x15, AX=0x2401) */
+	       enable_a20_bios();
+	       if (a20_test_short())
+		       return 0;
+	       
+	       /* Try enabling A20 through the keyboard controller */
+	       kbc_err = empty_8042();
+
+	       if (a20_test_short())
+		       return 0; /* BIOS worked, but with delayed reaction */
+	
+	       if (!kbc_err) {
+		       enable_a20_kbc();
+		       if (a20_test_long())
+			       return 0;
+	       }
+	       
+	       /* Finally, try enabling the "fast A20 gate" */
+	       enable_a20_fast();
+	       if (a20_test_long())
+		       return 0;
+       }
+       
+       return -1;
 #endif
 }

arch/x86/configs/i386_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Wed Sep  3 17:23:09 2008
+# Linux kernel version: 2.6.29-rc4
+# Thu Feb 12 12:57:57 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-# CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_CLOCKSOURCE_WATCHDOG=y
@@ -24,16 +23,14 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_GPIO is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_GENERIC_TIME_VSYSCALL is not set
 CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
@@ -42,12 +39,12 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_ZONE_DMA32 is not set
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 # CONFIG_AUDIT_ARCH is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 CONFIG_X86_SMP=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_32_SMP=y
 CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
@@ -76,30 +73,44 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_CPUSETS=y
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 # CONFIG_CGROUP_MEM_RES_CTLR is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 CONFIG_USER_NS=y
 CONFIG_PID_NS=y
+CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -124,12 +135,15 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
@@ -139,15 +153,10 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -155,12 +164,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,7 +183,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Processor type and features
@@ -186,15 +193,15 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
-CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_X86_RDC321X is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
@@ -238,10 +245,19 @@ CONFIG_X86_TSC=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_X86_DS=y
+CONFIG_X86_PTRACE_BTS=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_IOMMU_API is not set
 CONFIG_NR_CPUS=64
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
@@ -250,12 +266,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
 # CONFIG_X86_MCE is not set
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
 CONFIG_X86_REBOOTFIXUPS=y
 CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -264,6 +283,7 @@ CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -274,14 +294,17 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HIGHPTE=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW_64K=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set
@@ -302,10 +325,11 @@ CONFIG_PHYSICAL_START=0x1000000
 CONFIG_PHYSICAL_ALIGN=0x200000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 
 #
-# Power management options
+# Power management and ACPI options
 #
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
@@ -331,19 +355,13 @@ CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
 # CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
@@ -388,7 +406,6 @@ CONFIG_X86_ACPI_CPUFREQ=y
 #
 # shared options
 #
-# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
 # CONFIG_X86_SPEEDSTEP_LIB is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
@@ -415,6 +432,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
 CONFIG_ISA_DMA_API=y
 # CONFIG_ISA is not set
@@ -452,13 +470,17 @@ CONFIG_HOTPLUG_PCI=y
 # Executable file formats / Emulations
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
+CONFIG_HAVE_ATOMIC_IOMAP=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -519,7 +541,6 @@ CONFIG_DEFAULT_CUBIC=y
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -557,19 +578,21 @@ CONFIG_NF_CONNTRACK_IRC=y
 CONFIG_NF_CONNTRACK_SIP=y
 CONFIG_NF_CT_NETLINK=y
 CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_MARK=y
 CONFIG_NETFILTER_XT_TARGET_NFLOG=y
 CONFIG_NETFILTER_XT_TARGET_SECMARK=y
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
 CONFIG_NETFILTER_XT_MATCH_MARK=y
 CONFIG_NETFILTER_XT_MATCH_POLICY=y
 CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=y
 CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_IPTABLES=y
@@ -595,8 +618,8 @@ CONFIG_IP_NF_MANGLE=y
 CONFIG_NF_CONNTRACK_IPV6=y
 CONFIG_IP6_NF_IPTABLES=y
 CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_REJECT=y
 CONFIG_IP6_NF_MANGLE=y
 # CONFIG_IP_DCCP is not set
@@ -604,6 +627,7 @@ CONFIG_IP6_NF_MANGLE=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
@@ -623,6 +647,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -630,6 +655,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 # CONFIG_NET_SCH_INGRESS is not set
 
 #
@@ -644,6 +670,7 @@ CONFIG_NET_CLS=y
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
 # CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 # CONFIG_NET_EMATCH_CMP is not set
@@ -659,7 +686,9 @@ CONFIG_NET_CLS_ACT=y
 # CONFIG_NET_ACT_NAT is not set
 # CONFIG_NET_ACT_PEDIT is not set
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -676,29 +705,33 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -722,7 +755,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+CONFIG_PNP_DEBUG_MESSAGES=y
 
 #
 # Protocols
@@ -750,20 +783,19 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_TC1100_WMI is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -802,7 +834,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
@@ -875,6 +907,7 @@ CONFIG_PATA_OLDPIIX=y
 CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 # CONFIG_MD_LINEAR is not set
 # CONFIG_MD_RAID0 is not set
 # CONFIG_MD_RAID1 is not set
@@ -930,6 +963,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -953,6 +989,9 @@ CONFIG_NET_TULIP=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -960,7 +999,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
 # CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -974,15 +1012,16 @@ CONFIG_8139TOO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -1000,18 +1039,23 @@ CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
@@ -1025,9 +1069,8 @@ CONFIG_TR=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 # CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
@@ -1044,6 +1087,8 @@ CONFIG_WLAN_80211=y
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_IWLAGN is not set
@@ -1054,6 +1099,10 @@ CONFIG_ATH5K=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
 #
 # USB Network Adapters
 #
@@ -1062,6 +1111,7 @@ CONFIG_ATH5K=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -1123,6 +1173,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -1160,15 +1211,16 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1179,6 +1231,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
 
 #
@@ -1245,6 +1298,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
@@ -1279,6 +1333,7 @@ CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
@@ -1331,8 +1386,6 @@ CONFIG_I2C_I801=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1351,8 +1404,78 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1372,6 +1495,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_I6300ESB_WDT is not set
 # CONFIG_ITCO_WDT is not set
 # CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
 # CONFIG_HP_WATCHDOG is not set
 # CONFIG_SC1200_WDT is not set
 # CONFIG_PC87413_WDT is not set
@@ -1379,9 +1503,11 @@ CONFIG_WATCHDOG=y
 # CONFIG_SBC8360_WDT is not set
 # CONFIG_SBC7240_WDT is not set
 # CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
 # CONFIG_SMSC37B787_WDT is not set
 # CONFIG_W83627HF_WDT is not set
 # CONFIG_W83697HF_WDT is not set
+# CONFIG_W83697UG_WDT is not set
 # CONFIG_W83877F_WDT is not set
 # CONFIG_W83977F_WDT is not set
 # CONFIG_MACHZ_WDT is not set
@@ -1397,11 +1523,11 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1410,7 +1536,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1450,6 +1582,7 @@ CONFIG_DRM=y
 # CONFIG_DRM_I810 is not set
 # CONFIG_DRM_I830 is not set
 CONFIG_DRM_I915=y
+# CONFIG_DRM_I915_KMS is not set
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
@@ -1459,6 +1592,7 @@ CONFIG_DRM_I915=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1487,7 +1621,6 @@ CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_VESA is not set
 CONFIG_FB_EFI=y
-# CONFIG_FB_IMAC is not set
 # CONFIG_FB_N411 is not set
 # CONFIG_FB_HGA is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -1503,6 +1636,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -1515,12 +1649,15 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 # CONFIG_BACKLIGHT_PROGEAR is not set
 # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
 
 #
 # Display device support
@@ -1540,10 +1677,12 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 CONFIG_SND_HWDEP=y
+CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=y
 CONFIG_SND_SEQ_DUMMY=y
 CONFIG_SND_OSSEMUL=y
@@ -1551,6 +1690,8 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1605,11 +1746,16 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_FM801 is not set
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
 CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_HDA_CODEC_CMEDIA=y
 CONFIG_SND_HDA_CODEC_SI3054=y
@@ -1643,6 +1789,7 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
 CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
@@ -1657,15 +1804,37 @@ CONFIG_HIDRAW=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-CONFIG_HID_FF=y
 CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
 CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HIDDEV=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1683,6 +1852,8 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1691,6 +1862,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1700,6 +1872,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1707,20 +1881,20 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1728,7 +1902,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1749,6 +1922,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1766,7 +1940,13 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1775,6 +1955,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
@@ -1785,6 +1966,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
@@ -1824,6 +2006,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1833,12 +2016,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1851,6 +2037,22 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_INTEL_IOATDMA is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_TC1100_WMI is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_INTEL_MENLOW is not set
+CONFIG_EEEPC_LAPTOP=y
+# CONFIG_ACPI_WMI is not set
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_TOSHIBA is not set
 
 #
 # Firmware Drivers
@@ -1861,8 +2063,7 @@ CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=y
+# CONFIG_ISCSI_IBFT_FIND is not set
 
 #
 # File systems
@@ -1872,21 +2073,24 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1920,16 +2124,14 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_VMCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1939,6 +2141,7 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1960,6 +2163,7 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2036,7 +2240,7 @@ CONFIG_NLS_UTF8=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
@@ -2066,33 +2270,54 @@ CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_HW_BRANCH_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_HW_BRANCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -2123,8 +2348,10 @@ CONFIG_OPTIMIZE_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2135,7 +2362,6 @@ CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
 CONFIG_CRYPTO=y
@@ -2143,11 +2369,18 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -2182,6 +2415,7 @@ CONFIG_CRYPTO_HMAC=y
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -2222,6 +2456,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_PADLOCK is not set
 # CONFIG_CRYPTO_DEV_GEODE is not set
@@ -2239,6 +2478,7 @@ CONFIG_VIRTUALIZATION=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y

arch/x86/configs/x86_64_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Wed Sep  3 17:13:39 2008
+# Linux kernel version: 2.6.29-rc4
+# Thu Feb 12 12:57:29 2009
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-# CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_CLOCKSOURCE_WATCHDOG=y
@@ -23,17 +22,16 @@ CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
 CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_GPIO is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
@@ -42,12 +40,12 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ZONE_DMA32=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 CONFIG_X86_SMP=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_64_SMP=y
 CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
@@ -76,30 +74,44 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_CPUSETS=y
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 # CONFIG_CGROUP_MEM_RES_CTLR is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 CONFIG_USER_NS=y
 CONFIG_PID_NS=y
+CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -124,12 +136,15 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
@@ -139,15 +154,10 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -155,7 +165,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
@@ -175,7 +184,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Processor type and features
@@ -185,13 +194,15 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_SPARSE_IRQ=y
+# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
-CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
@@ -230,6 +241,11 @@ CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_X86_DS=y
+CONFIG_X86_PTRACE_BTS=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
@@ -237,8 +253,11 @@ CONFIG_GART_IOMMU=y
 CONFIG_CALGARY_IOMMU=y
 CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
 CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_STATS=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
+CONFIG_IOMMU_API=y
+# CONFIG_MAXSMP is not set
 CONFIG_NR_CPUS=64
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
@@ -247,12 +266,17 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
 # CONFIG_X86_MCE is not set
 # CONFIG_I8K is not set
 CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
 CONFIG_NUMA=y
 CONFIG_K8_NUMA=y
 CONFIG_X86_64_ACPI_NUMA=y
@@ -269,7 +293,6 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
@@ -280,10 +303,14 @@ CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW_64K=y
 CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set
 CONFIG_X86_PAT=y
@@ -302,11 +329,12 @@ CONFIG_PHYSICAL_START=0x1000000
 CONFIG_PHYSICAL_ALIGN=0x200000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 
 #
-# Power management options
+# Power management and ACPI options
 #
 CONFIG_ARCH_HIBERNATION_HEADER=y
 CONFIG_PM=y
@@ -333,20 +361,14 @@ CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_NUMA=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
 # CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
@@ -381,12 +403,16 @@ CONFIG_X86_ACPI_CPUFREQ=y
 #
 # shared options
 #
-# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
 # CONFIG_X86_SPEEDSTEP_LIB is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
 
+#
+# Memory power savings
+#
+# CONFIG_I7300_IDLE is not set
+
 #
 # Bus options (PCI etc.)
 #
@@ -395,8 +421,10 @@ CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_DMAR=y
+# CONFIG_DMAR_DEFAULT_ON is not set
 CONFIG_DMAR_GFX_WA=y
 CONFIG_DMAR_FLOPPY_WA=y
+# CONFIG_INTR_REMAP is not set
 CONFIG_PCIEPORTBUS=y
 # CONFIG_HOTPLUG_PCI_PCIE is not set
 CONFIG_PCIEAER=y
@@ -405,6 +433,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
 CONFIG_ISA_DMA_API=y
 CONFIG_K8_NB=y
@@ -438,6 +467,8 @@ CONFIG_HOTPLUG_PCI=y
 #
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_IA32_EMULATION=y
 # CONFIG_IA32_AOUT is not set
@@ -449,6 +480,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -509,7 +541,6 @@ CONFIG_DEFAULT_CUBIC=y
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -547,19 +578,21 @@ CONFIG_NF_CONNTRACK_IRC=y
 CONFIG_NF_CONNTRACK_SIP=y
 CONFIG_NF_CT_NETLINK=y
 CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_MARK=y
 CONFIG_NETFILTER_XT_TARGET_NFLOG=y
 CONFIG_NETFILTER_XT_TARGET_SECMARK=y
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
 CONFIG_NETFILTER_XT_MATCH_MARK=y
 CONFIG_NETFILTER_XT_MATCH_POLICY=y
 CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=y
 CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_IPTABLES=y
@@ -585,8 +618,8 @@ CONFIG_IP_NF_MANGLE=y
 CONFIG_NF_CONNTRACK_IPV6=y
 CONFIG_IP6_NF_IPTABLES=y
 CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_REJECT=y
 CONFIG_IP6_NF_MANGLE=y
 # CONFIG_IP_DCCP is not set
@@ -594,6 +627,7 @@ CONFIG_IP6_NF_MANGLE=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
@@ -613,6 +647,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -620,6 +655,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 # CONFIG_NET_SCH_INGRESS is not set
 
 #
@@ -634,6 +670,7 @@ CONFIG_NET_CLS=y
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
 # CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 # CONFIG_NET_EMATCH_CMP is not set
@@ -649,7 +686,9 @@ CONFIG_NET_CLS_ACT=y
 # CONFIG_NET_ACT_NAT is not set
 # CONFIG_NET_ACT_PEDIT is not set
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -666,29 +705,33 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -712,7 +755,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+CONFIG_PNP_DEBUG_MESSAGES=y
 
 #
 # Protocols
@@ -740,21 +783,21 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_SGI_XP is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_SGI_GRU is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -793,7 +836,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
@@ -864,6 +907,7 @@ CONFIG_PATA_OLDPIIX=y
 CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 # CONFIG_MD_LINEAR is not set
 # CONFIG_MD_RAID0 is not set
 # CONFIG_MD_RAID1 is not set
@@ -919,6 +963,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -942,6 +989,9 @@ CONFIG_NET_TULIP=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -949,7 +999,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
 # CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -963,15 +1012,16 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -989,18 +1039,23 @@ CONFIG_TIGON3=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
@@ -1013,9 +1068,8 @@ CONFIG_TR=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 # CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
@@ -1032,6 +1086,8 @@ CONFIG_WLAN_80211=y
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_IWLAGN is not set
@@ -1042,6 +1098,10 @@ CONFIG_ATH5K=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
 #
 # USB Network Adapters
 #
@@ -1050,6 +1110,7 @@ CONFIG_ATH5K=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -1059,6 +1120,7 @@ CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_IBMTR is not set
 # CONFIG_WAN is not set
 CONFIG_FDDI=y
 # CONFIG_DEFXX is not set
@@ -1110,6 +1172,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -1147,15 +1210,16 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1165,6 +1229,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
 
 #
@@ -1231,6 +1296,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
@@ -1260,6 +1326,7 @@ CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
@@ -1311,8 +1378,6 @@ CONFIG_I2C_I801=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1331,8 +1396,78 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1352,15 +1487,18 @@ CONFIG_WATCHDOG=y
 # CONFIG_I6300ESB_WDT is not set
 # CONFIG_ITCO_WDT is not set
 # CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
 # CONFIG_HP_WATCHDOG is not set
 # CONFIG_SC1200_WDT is not set
 # CONFIG_PC87413_WDT is not set
 # CONFIG_60XX_WDT is not set
 # CONFIG_SBC8360_WDT is not set
 # CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
 # CONFIG_SMSC37B787_WDT is not set
 # CONFIG_W83627HF_WDT is not set
 # CONFIG_W83697HF_WDT is not set
+# CONFIG_W83697UG_WDT is not set
 # CONFIG_W83877F_WDT is not set
 # CONFIG_W83977F_WDT is not set
 # CONFIG_MACHZ_WDT is not set
@@ -1376,11 +1514,11 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1389,7 +1527,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1423,6 +1567,7 @@ CONFIG_DRM=y
 # CONFIG_DRM_I810 is not set
 # CONFIG_DRM_I830 is not set
 CONFIG_DRM_I915=y
+CONFIG_DRM_I915_KMS=y
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
@@ -1432,6 +1577,7 @@ CONFIG_DRM_I915=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1460,7 +1606,6 @@ CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_VESA is not set
 CONFIG_FB_EFI=y
-# CONFIG_FB_IMAC is not set
 # CONFIG_FB_N411 is not set
 # CONFIG_FB_HGA is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -1475,6 +1620,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -1486,12 +1632,15 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 # CONFIG_BACKLIGHT_PROGEAR is not set
 # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
 
 #
 # Display device support
@@ -1511,10 +1660,12 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 CONFIG_SND_HWDEP=y
+CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=y
 CONFIG_SND_SEQ_DUMMY=y
 CONFIG_SND_OSSEMUL=y
@@ -1522,6 +1673,8 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1575,11 +1728,16 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_FM801 is not set
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
 CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_HDA_CODEC_CMEDIA=y
 CONFIG_SND_HDA_CODEC_SI3054=y
@@ -1612,6 +1770,7 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
 CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
@@ -1626,15 +1785,37 @@ CONFIG_HIDRAW=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-CONFIG_HID_FF=y
 CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
 CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HIDDEV=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1652,6 +1833,8 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1660,6 +1843,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1669,6 +1853,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1676,20 +1862,20 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1697,7 +1883,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1718,6 +1903,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1735,7 +1921,13 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1744,6 +1936,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
@@ -1754,6 +1947,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
@@ -1793,6 +1987,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1802,12 +1997,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1820,6 +2018,21 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_INTEL_IOATDMA is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_INTEL_MENLOW is not set
+CONFIG_EEEPC_LAPTOP=y
+# CONFIG_ACPI_WMI is not set
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_TOSHIBA is not set
 
 #
 # Firmware Drivers
@@ -1830,8 +2043,7 @@ CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=y
+# CONFIG_ISCSI_IBFT_FIND is not set
 
 #
 # File systems
@@ -1841,22 +2053,25 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1890,16 +2105,14 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_VMCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1909,6 +2122,7 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1930,6 +2144,7 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2006,7 +2221,7 @@ CONFIG_NLS_UTF8=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
@@ -2035,40 +2250,60 @@ CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_HW_BRANCH_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_HW_BRANCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
-# CONFIG_DIRECT_GBPAGES is not set
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_IOMMU_DEBUG is not set
@@ -2092,8 +2327,10 @@ CONFIG_OPTIMIZE_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2104,7 +2341,6 @@ CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
 CONFIG_CRYPTO=y
@@ -2112,11 +2348,18 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -2151,6 +2394,7 @@ CONFIG_CRYPTO_HMAC=y
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -2191,6 +2435,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_HAVE_KVM=y
@@ -2205,6 +2454,7 @@ CONFIG_VIRTUALIZATION=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y

arch/x86/ia32/ia32_signal.c

@@ -46,78 +46,83 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 {
-	int err;
+	int err = 0;
 
 	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
-	/* If you change siginfo_t structure, please make sure that
-	   this code is fixed accordingly.
-	   It should never copy any pad contained in the structure
-	   to avoid security leaks, but must copy the generic
-	   3 ints plus the relevant union member.  */
-	err = __put_user(from->si_signo, &to->si_signo);
-	err |= __put_user(from->si_errno, &to->si_errno);
-	err |= __put_user((short)from->si_code, &to->si_code);
-
-	if (from->si_code < 0) {
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr);
-	} else {
-		/*
-		 * First 32bits of unions are always present:
-		 * si_pid === si_band === si_tid === si_addr(LS half)
-		 */
-		err |= __put_user(from->_sifields._pad[0],
-				  &to->_sifields._pad[0]);
-		switch (from->si_code >> 16) {
-		case __SI_FAULT >> 16:
-			break;
-		case __SI_CHLD >> 16:
-			err |= __put_user(from->si_utime, &to->si_utime);
-			err |= __put_user(from->si_stime, &to->si_stime);
-			err |= __put_user(from->si_status, &to->si_status);
-			/* FALL THROUGH */
-		default:
-		case __SI_KILL >> 16:
-			err |= __put_user(from->si_uid, &to->si_uid);
-			break;
-		case __SI_POLL >> 16:
-			err |= __put_user(from->si_fd, &to->si_fd);
-			break;
-		case __SI_TIMER >> 16:
-			err |= __put_user(from->si_overrun, &to->si_overrun);
-			err |= __put_user(ptr_to_compat(from->si_ptr),
-					  &to->si_ptr);
-			break;
-			 /* This is not generated by the kernel as of now.  */
-		case __SI_RT >> 16:
-		case __SI_MESGQ >> 16:
-			err |= __put_user(from->si_uid, &to->si_uid);
-			err |= __put_user(from->si_int, &to->si_int);
-			break;
+	put_user_try {
+		/* If you change siginfo_t structure, please make sure that
+		   this code is fixed accordingly.
+		   It should never copy any pad contained in the structure
+		   to avoid security leaks, but must copy the generic
+		   3 ints plus the relevant union member.  */
+		put_user_ex(from->si_signo, &to->si_signo);
+		put_user_ex(from->si_errno, &to->si_errno);
+		put_user_ex((short)from->si_code, &to->si_code);
+
+		if (from->si_code < 0) {
+			put_user_ex(from->si_pid, &to->si_pid);
+			put_user_ex(from->si_uid, &to->si_uid);
+			put_user_ex(ptr_to_compat(from->si_ptr), &to->si_ptr);
+		} else {
+			/*
+			 * First 32bits of unions are always present:
+			 * si_pid === si_band === si_tid === si_addr(LS half)
+			 */
+			put_user_ex(from->_sifields._pad[0],
+					  &to->_sifields._pad[0]);
+			switch (from->si_code >> 16) {
+			case __SI_FAULT >> 16:
+				break;
+			case __SI_CHLD >> 16:
+				put_user_ex(from->si_utime, &to->si_utime);
+				put_user_ex(from->si_stime, &to->si_stime);
+				put_user_ex(from->si_status, &to->si_status);
+				/* FALL THROUGH */
+			default:
+			case __SI_KILL >> 16:
+				put_user_ex(from->si_uid, &to->si_uid);
+				break;
+			case __SI_POLL >> 16:
+				put_user_ex(from->si_fd, &to->si_fd);
+				break;
+			case __SI_TIMER >> 16:
+				put_user_ex(from->si_overrun, &to->si_overrun);
+				put_user_ex(ptr_to_compat(from->si_ptr),
+					    &to->si_ptr);
+				break;
+				 /* This is not generated by the kernel as of now.  */
+			case __SI_RT >> 16:
+			case __SI_MESGQ >> 16:
+				put_user_ex(from->si_uid, &to->si_uid);
+				put_user_ex(from->si_int, &to->si_int);
+				break;
+			}
 		}
-	}
+	} put_user_catch(err);
+
 	return err;
 }
 
 int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 {
-	int err;
+	int err = 0;
 	u32 ptr32;
 
 	if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
-	err = __get_user(to->si_signo, &from->si_signo);
-	err |= __get_user(to->si_errno, &from->si_errno);
-	err |= __get_user(to->si_code, &from->si_code);
+	get_user_try {
+		get_user_ex(to->si_signo, &from->si_signo);
+		get_user_ex(to->si_errno, &from->si_errno);
+		get_user_ex(to->si_code, &from->si_code);
 
-	err |= __get_user(to->si_pid, &from->si_pid);
-	err |= __get_user(to->si_uid, &from->si_uid);
-	err |= __get_user(ptr32, &from->si_ptr);
-	to->si_ptr = compat_ptr(ptr32);
+		get_user_ex(to->si_pid, &from->si_pid);
+		get_user_ex(to->si_uid, &from->si_uid);
+		get_user_ex(ptr32, &from->si_ptr);
+		to->si_ptr = compat_ptr(ptr32);
+	} get_user_catch(err);
 
 	return err;
 }
@@ -142,17 +147,23 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 				  struct pt_regs *regs)
 {
 	stack_t uss, uoss;
-	int ret;
+	int ret, err = 0;
 	mm_segment_t seg;
 
 	if (uss_ptr) {
 		u32 ptr;
 
 		memset(&uss, 0, sizeof(stack_t));
-		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)) ||
-			    __get_user(ptr, &uss_ptr->ss_sp) ||
-			    __get_user(uss.ss_flags, &uss_ptr->ss_flags) ||
-			    __get_user(uss.ss_size, &uss_ptr->ss_size))
+		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)))
+			return -EFAULT;
+
+		get_user_try {
+			get_user_ex(ptr, &uss_ptr->ss_sp);
+			get_user_ex(uss.ss_flags, &uss_ptr->ss_flags);
+			get_user_ex(uss.ss_size, &uss_ptr->ss_size);
+		} get_user_catch(err);
+
+		if (err)
 			return -EFAULT;
 		uss.ss_sp = compat_ptr(ptr);
 	}
@@ -161,10 +172,16 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 	ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, regs->sp);
 	set_fs(seg);
 	if (ret >= 0 && uoss_ptr)  {
-		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)) ||
-		    __put_user(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp) ||
-		    __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
-		    __put_user(uoss.ss_size, &uoss_ptr->ss_size))
+		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)))
+			return -EFAULT;
+
+		put_user_try {
+			put_user_ex(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp);
+			put_user_ex(uoss.ss_flags, &uoss_ptr->ss_flags);
+			put_user_ex(uoss.ss_size, &uoss_ptr->ss_size);
+		} put_user_catch(err);
+
+		if (err)
 			ret = -EFAULT;
 	}
 	return ret;
@@ -174,18 +191,18 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
  * Do a signal return; undo the signal stack.
  */
 #define COPY(x)			{		\
-	err |= __get_user(regs->x, &sc->x);	\
+	get_user_ex(regs->x, &sc->x);		\
 }
 
 #define COPY_SEG_CPL3(seg)	{			\
 		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
+		get_user_ex(tmp, &sc->seg);		\
 		regs->seg = tmp | 3;			\
 }
 
 #define RELOAD_SEG(seg)		{		\
 	unsigned int cur, pre;			\
-	err |= __get_user(pre, &sc->seg);	\
+	get_user_ex(pre, &sc->seg);		\
 	savesegment(seg, cur);			\
 	pre |= 3;				\
 	if (pre != cur)				\
@@ -209,39 +226,42 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	       sc, sc->err, sc->ip, sc->cs, sc->flags);
 #endif
 
-	/*
-	 * Reload fs and gs if they have changed in the signal
-	 * handler.  This does not handle long fs/gs base changes in
-	 * the handler, but does not clobber them at least in the
-	 * normal case.
-	 */
-	err |= __get_user(gs, &sc->gs);
-	gs |= 3;
-	savesegment(gs, oldgs);
-	if (gs != oldgs)
-		load_gs_index(gs);
-
-	RELOAD_SEG(fs);
-	RELOAD_SEG(ds);
-	RELOAD_SEG(es);
-
-	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
-	COPY(dx); COPY(cx); COPY(ip);
-	/* Don't touch extended registers */
-
-	COPY_SEG_CPL3(cs);
-	COPY_SEG_CPL3(ss);
-
-	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
-	/* disable syscall checks */
-	regs->orig_ax = -1;
-
-	err |= __get_user(tmp, &sc->fpstate);
-	buf = compat_ptr(tmp);
-	err |= restore_i387_xstate_ia32(buf);
-
-	err |= __get_user(*pax, &sc->ax);
+	get_user_try {
+		/*
+		 * Reload fs and gs if they have changed in the signal
+		 * handler.  This does not handle long fs/gs base changes in
+		 * the handler, but does not clobber them at least in the
+		 * normal case.
+		 */
+		get_user_ex(gs, &sc->gs);
+		gs |= 3;
+		savesegment(gs, oldgs);
+		if (gs != oldgs)
+			load_gs_index(gs);
+
+		RELOAD_SEG(fs);
+		RELOAD_SEG(ds);
+		RELOAD_SEG(es);
+
+		COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
+		COPY(dx); COPY(cx); COPY(ip);
+		/* Don't touch extended registers */
+
+		COPY_SEG_CPL3(cs);
+		COPY_SEG_CPL3(ss);
+
+		get_user_ex(tmpflags, &sc->flags);
+		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+		/* disable syscall checks */
+		regs->orig_ax = -1;
+
+		get_user_ex(tmp, &sc->fpstate);
+		buf = compat_ptr(tmp);
+		err |= restore_i387_xstate_ia32(buf);
+
+		get_user_ex(*pax, &sc->ax);
+	} get_user_catch(err);
+
 	return err;
 }
 
@@ -319,36 +339,38 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
 {
 	int tmp, err = 0;
 
-	savesegment(gs, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
-	savesegment(fs, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
-	savesegment(ds, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->ds);
-	savesegment(es, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->es);
-
-	err |= __put_user(regs->di, &sc->di);
-	err |= __put_user(regs->si, &sc->si);
-	err |= __put_user(regs->bp, &sc->bp);
-	err |= __put_user(regs->sp, &sc->sp);
-	err |= __put_user(regs->bx, &sc->bx);
-	err |= __put_user(regs->dx, &sc->dx);
-	err |= __put_user(regs->cx, &sc->cx);
-	err |= __put_user(regs->ax, &sc->ax);
-	err |= __put_user(current->thread.trap_no, &sc->trapno);
-	err |= __put_user(current->thread.error_code, &sc->err);
-	err |= __put_user(regs->ip, &sc->ip);
-	err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs);
-	err |= __put_user(regs->flags, &sc->flags);
-	err |= __put_user(regs->sp, &sc->sp_at_signal);
-	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
-
-	err |= __put_user(ptr_to_compat(fpstate), &sc->fpstate);
-
-	/* non-iBCS2 extensions.. */
-	err |= __put_user(mask, &sc->oldmask);
-	err |= __put_user(current->thread.cr2, &sc->cr2);
+	put_user_try {
+		savesegment(gs, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->gs);
+		savesegment(fs, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->fs);
+		savesegment(ds, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->ds);
+		savesegment(es, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->es);
+
+		put_user_ex(regs->di, &sc->di);
+		put_user_ex(regs->si, &sc->si);
+		put_user_ex(regs->bp, &sc->bp);
+		put_user_ex(regs->sp, &sc->sp);
+		put_user_ex(regs->bx, &sc->bx);
+		put_user_ex(regs->dx, &sc->dx);
+		put_user_ex(regs->cx, &sc->cx);
+		put_user_ex(regs->ax, &sc->ax);
+		put_user_ex(current->thread.trap_no, &sc->trapno);
+		put_user_ex(current->thread.error_code, &sc->err);
+		put_user_ex(regs->ip, &sc->ip);
+		put_user_ex(regs->cs, (unsigned int __user *)&sc->cs);
+		put_user_ex(regs->flags, &sc->flags);
+		put_user_ex(regs->sp, &sc->sp_at_signal);
+		put_user_ex(regs->ss, (unsigned int __user *)&sc->ss);
+
+		put_user_ex(ptr_to_compat(fpstate), &sc->fpstate);
+
+		/* non-iBCS2 extensions.. */
+		put_user_ex(mask, &sc->oldmask);
+		put_user_ex(current->thread.cr2, &sc->cr2);
+	} put_user_catch(err);
 
 	return err;
 }
@@ -437,13 +459,17 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		else
 			restorer = &frame->retcode;
 	}
-	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
 
-	/*
-	 * These are actually not used anymore, but left because some
-	 * gdb versions depend on them as a marker.
-	 */
-	err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode);
+	put_user_try {
+		put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
+
+		/*
+		 * These are actually not used anymore, but left because some
+		 * gdb versions depend on them as a marker.
+		 */
+		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+	} put_user_catch(err);
+
 	if (err)
 		return -EFAULT;
 
@@ -496,41 +522,40 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return -EFAULT;
 
-	err |= __put_user(sig, &frame->sig);
-	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
-	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
-	err |= copy_siginfo_to_user32(&frame->info, info);
-	if (err)
-		return -EFAULT;
+	put_user_try {
+		put_user_ex(sig, &frame->sig);
+		put_user_ex(ptr_to_compat(&frame->info), &frame->pinfo);
+		put_user_ex(ptr_to_compat(&frame->uc), &frame->puc);
+		err |= copy_siginfo_to_user32(&frame->info, info);
 
-	/* Create the ucontext.  */
-	if (cpu_has_xsave)
-		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
-	else
-		err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->sp),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
-				     regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		return -EFAULT;
+		/* Create the ucontext.  */
+		if (cpu_has_xsave)
+			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
+		else
+			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(0, &frame->uc.uc_link);
+		put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+		put_user_ex(sas_ss_flags(regs->sp),
+			    &frame->uc.uc_stack.ss_flags);
+		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+		err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
+					     regs, set->sig[0]);
+		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+		if (ka->sa.sa_flags & SA_RESTORER)
+			restorer = ka->sa.sa_restorer;
+		else
+			restorer = VDSO32_SYMBOL(current->mm->context.vdso,
+						 rt_sigreturn);
+		put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
+
+		/*
+		 * Not actually used anymore, but left because some gdb
+		 * versions need it.
+		 */
+		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+	} put_user_catch(err);
 
-	if (ka->sa.sa_flags & SA_RESTORER)
-		restorer = ka->sa.sa_restorer;
-	else
-		restorer = VDSO32_SYMBOL(current->mm->context.vdso,
-					 rt_sigreturn);
-	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
-
-	/*
-	 * Not actually used anymore, but left because some gdb
-	 * versions need it.
-	 */
-	err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode);
 	if (err)
 		return -EFAULT;
 

arch/x86/include/asm/a.out-core.h

@@ -55,7 +55,7 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 	dump->regs.ds = (u16)regs->ds;
 	dump->regs.es = (u16)regs->es;
 	dump->regs.fs = (u16)regs->fs;
-	savesegment(gs, dump->regs.gs);
+	dump->regs.gs = get_user_gs(regs);
 	dump->regs.orig_ax = regs->orig_ax;
 	dump->regs.ip = regs->ip;
 	dump->regs.cs = (u16)regs->cs;

arch/x86/include/asm/acpi.h

@@ -102,9 +102,6 @@ static inline void disable_acpi(void)
 	acpi_noirq = 1;
 }
 
-/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
-#define FIX_ACPI_PAGES 4
-
 extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
 
 static inline void acpi_noirq_set(void) { acpi_noirq = 1; }

arch/x86/include/asm/apic.h

@@ -33,7 +33,13 @@
 	} while (0)
 
 
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
 extern void generic_apic_probe(void);
+#else
+static inline void generic_apic_probe(void)
+{
+}
+#endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
@@ -41,6 +47,21 @@ extern unsigned int apic_verbosity;
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
+
+#ifdef CONFIG_SMP
+extern void __inquire_remote_apic(int apicid);
+#else /* CONFIG_SMP */
+static inline void __inquire_remote_apic(int apicid)
+{
+}
+#endif /* CONFIG_SMP */
+
+static inline void default_inquire_remote_apic(int apicid)
+{
+	if (apic_verbosity >= APIC_DEBUG)
+		__inquire_remote_apic(apicid);
+}
+
 /*
  * Basic functions accessing APICs.
  */
@@ -124,12 +145,35 @@ struct apic_ops {
 
 extern struct apic_ops *apic_ops;
 
-#define apic_read (apic_ops->read)
-#define apic_write (apic_ops->write)
-#define apic_icr_read (apic_ops->icr_read)
-#define apic_icr_write (apic_ops->icr_write)
-#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
-#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
+static inline u32 apic_read(u32 reg)
+{
+	return apic_ops->read(reg);
+}
+
+static inline void apic_write(u32 reg, u32 val)
+{
+	apic_ops->write(reg, val);
+}
+
+static inline u64 apic_icr_read(void)
+{
+	return apic_ops->icr_read();
+}
+
+static inline void apic_icr_write(u32 low, u32 high)
+{
+	apic_ops->icr_write(low, high);
+}
+
+static inline void apic_wait_icr_idle(void)
+{
+	apic_ops->wait_icr_idle();
+}
+
+static inline u32 safe_apic_wait_icr_idle(void)
+{
+	return apic_ops->safe_wait_icr_idle();
+}
 
 extern int get_physical_broadcast(void);
 
@@ -196,4 +240,22 @@ static inline void disable_local_APIC(void) { }
 
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
+#ifdef CONFIG_X86_64
+#define	SET_APIC_ID(x)		(apic->set_apic_id(x))
+#else
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static inline unsigned default_get_apic_id(unsigned long x)
+{
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+
+	if (APIC_XAPIC(ver))
+		return (x >> 24) & 0xFF;
+	else
+		return (x >> 24) & 0x0F;
+}
+#endif
+
+#endif
+
 #endif /* _ASM_X86_APIC_H */

arch/x86/include/asm/bigsmp/apic.h

@@ -1,155 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
-	return (1);
-}
-
-static inline const cpumask_t *target_cpus(void)
-{
-#ifdef CONFIG_SMP
-	return &cpu_online_map;
-#else
-	return &cpumask_of_cpu(0);
-#endif
-}
-
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL	0
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE	(dest_Fixed)
-#define INT_DEST_MODE		(0)    /* phys delivery to target proc */
-#define NO_BALANCE_IRQ		(0)
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return (0);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
-	return (1);
-}
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long val, id;
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	id = xapic_phys_to_log_apicid(cpu);
-	val |= SET_APIC_LOGICAL_ID(id);
-	return val;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"Physflat", nr_ioapics);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return (0);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-	return apicid_2_node[hard_smp_processor_id()];
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-
-	return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_physical_id(cpu);
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xFFL);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return (1);
-}
-
-/* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int cpu;
-	int apicid;	
-
-	cpu = first_cpu(*cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	return apicid;
-}
-
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask)
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	if (cpu < nr_cpu_ids)
-		return cpu_to_logical_apicid(cpu);
-
-	return BAD_APICID;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */

arch/x86/include/asm/bigsmp/apicdef.h

@@ -1,13 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define		APIC_ID_MASK		(0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
-	return (((x)>>24)&0xFF);
-}
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
-#endif

arch/x86/include/asm/bigsmp/ipi.h

@@ -1,22 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */

arch/x86/include/asm/calling.h

@@ -1,5 +1,55 @@
 /*
- * Some macros to handle stack frames in assembly.
+
+ x86 function call convention, 64-bit:
+ -------------------------------------
+  arguments           |  callee-saved      | extra caller-saved | return
+ [callee-clobbered]   |                    | [callee-clobbered] |
+ ---------------------------------------------------------------------------
+ rdi rsi rdx rcx r8-9 | rbx rbp [*] r12-15 | r10-11             | rax, rdx [**]
+
+ ( rsp is obviously invariant across normal function calls. (gcc can 'merge'
+   functions when it sees tail-call optimization possibilities) rflags is
+   clobbered. Leftover arguments are passed over the stack frame.)
+
+ [*]  In the frame-pointers case rbp is fixed to the stack frame.
+
+ [**] for struct return values wider than 64 bits the return convention is a
+      bit more complex: up to 128 bits width we return small structures
+      straight in rax, rdx. For structures larger than that (3 words or
+      larger) the caller puts a pointer to an on-stack return struct
+      [allocated in the caller's stack frame] into the first argument - i.e.
+      into rdi. All other arguments shift up by one in this case.
+      Fortunately this case is rare in the kernel.
+
+For 32-bit we have the following conventions - kernel is built with
+-mregparm=3 and -freg-struct-return:
+
+ x86 function calling convention, 32-bit:
+ ----------------------------------------
+  arguments         | callee-saved        | extra caller-saved | return
+ [callee-clobbered] |                     | [callee-clobbered] |
+ -------------------------------------------------------------------------
+ eax edx ecx        | ebx edi esi ebp [*] | <none>             | eax, edx [**]
+
+ ( here too esp is obviously invariant across normal function calls. eflags
+   is clobbered. Leftover arguments are passed over the stack frame. )
+
+ [*]  In the frame-pointers case ebp is fixed to the stack frame.
+
+ [**] We build with -freg-struct-return, which on 32-bit means similar
+      semantics as on 64-bit: edx can be used for a second return value
+      (i.e. covering integer and structure sizes up to 64 bits) - after that
+      it gets more complex and more expensive: 3-word or larger struct returns
+      get done in the caller's frame and the pointer to the return struct goes
+      into regparm0, i.e. eax - the other arguments shift up and the
+      function's register parameters degenerate to regparm=2 in essence.
+
+*/
+
+
+/*
+ * 64-bit system call stack frame layout defines and helpers,
+ * for assembly code:
  */
 
 #define R15		  0
@@ -9,7 +59,7 @@
 #define RBP		 32
 #define RBX		 40
 
-/* arguments: interrupts/non tracing syscalls only save upto here*/
+/* arguments: interrupts/non tracing syscalls only save up to here: */
 #define R11		 48
 #define R10		 56
 #define R9		 64
@@ -22,7 +72,7 @@
 #define ORIG_RAX	120       /* + error_code */
 /* end of arguments */
 
-/* cpu exception frame or undefined in case of fast syscall. */
+/* cpu exception frame or undefined in case of fast syscall: */
 #define RIP		128
 #define CS		136
 #define EFLAGS		144

arch/x86/include/asm/cpu.h

@@ -32,10 +32,6 @@ extern void arch_unregister_cpu(int);
 
 DECLARE_PER_CPU(int, cpu_state);
 
-#ifdef CONFIG_X86_HAS_BOOT_CPU_ID
-extern unsigned char boot_cpu_id;
-#else
-#define boot_cpu_id				0
-#endif
+extern unsigned int boot_cpu_id;
 
 #endif /* _ASM_X86_CPU_H */

arch/x86/include/asm/cpumask.h

@@ -10,6 +10,8 @@ extern cpumask_var_t cpu_callout_mask;
 extern cpumask_var_t cpu_initialized_mask;
 extern cpumask_var_t cpu_sibling_setup_mask;
 
+extern void setup_cpu_local_masks(void);
+
 #else /* CONFIG_X86_32 */
 
 extern cpumask_t cpu_callin_map;
@@ -22,6 +24,8 @@ extern cpumask_t cpu_sibling_setup_map;
 #define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
 #define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
 
+static inline void setup_cpu_local_masks(void) { }
+
 #endif /* CONFIG_X86_32 */
 
 #endif /* __ASSEMBLY__ */

arch/x86/include/asm/elf.h

@@ -112,7 +112,7 @@ extern unsigned int vdso_enabled;
  * now struct_user_regs, they are different)
  */
 
-#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+#define ELF_CORE_COPY_REGS_COMMON(pr_reg, regs)	\
 do {						\
 	pr_reg[0] = regs->bx;			\
 	pr_reg[1] = regs->cx;			\
@@ -124,7 +124,6 @@ do {						\
 	pr_reg[7] = regs->ds & 0xffff;		\
 	pr_reg[8] = regs->es & 0xffff;		\
 	pr_reg[9] = regs->fs & 0xffff;		\
-	savesegment(gs, pr_reg[10]);		\
 	pr_reg[11] = regs->orig_ax;		\
 	pr_reg[12] = regs->ip;			\
 	pr_reg[13] = regs->cs & 0xffff;		\
@@ -133,6 +132,18 @@ do {						\
 	pr_reg[16] = regs->ss & 0xffff;		\
 } while (0);
 
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+do {						\
+	ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+	pr_reg[10] = get_user_gs(regs);		\
+} while (0);
+
+#define ELF_CORE_COPY_KERNEL_REGS(pr_reg, regs)	\
+do {						\
+	ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+	savesegment(gs, pr_reg[10]);		\
+} while (0);
+
 #define ELF_PLATFORM	(utsname()->machine)
 #define set_personality_64bit()	do { } while (0)
 

arch/x86/include/asm/mach-default/entry_arch.h → arch/x86/include/asm/entry_arch.h

@@ -9,7 +9,7 @@
  * is no hardware IRQ pin equivalent for them, they are triggered
  * through the ICC by us (IPIs)
  */
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
 BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
 BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)

arch/x86/include/asm/es7000/apic.h

@@ -1,242 +0,0 @@
-#ifndef __ASM_ES7000_APIC_H
-#define __ASM_ES7000_APIC_H
-
-#include <linux/gfp.h>
-
-#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
-	        return (1);
-}
-
-static inline const cpumask_t *target_cpus_cluster(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-static inline const cpumask_t *target_cpus(void)
-{
-	return &cpumask_of_cpu(smp_processor_id());
-}
-
-#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
-#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
-#define NO_BALANCE_IRQ_CLUSTER		(1)
-
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE	(dest_Fixed)
-#define INT_DEST_MODE		(0)    /* phys delivery to target procs */
-#define NO_BALANCE_IRQ		(0)
-#undef  APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL	0x0
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-static inline unsigned long check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long id;
-	id = xapic_phys_to_log_apicid(cpu);
-	return (SET_APIC_LOGICAL_ID(id));
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr_cluster(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE_CLUSTER);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-extern int apic_version [MAX_APICS];
-static inline void setup_apic_routing(void)
-{
-	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
-		(apic_version[apic] == 0x14) ?
-			"Physical Cluster" : "Logical Cluster",
-			nr_ioapics, cpus_addr(*target_cpus())[0]);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-	return 0;
-}
-
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (!mps_cpu)
-		return boot_cpu_physical_apicid;
-	else if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
-	static int id = 0;
-	physid_mask_t mask;
-	mask = physid_mask_of_physid(id);
-	++id;
-	return mask;
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xff);
-}
-
-
-static inline void setup_portio_remap(void)
-{
-}
-
-extern unsigned int boot_cpu_physical_apicid;
-static inline int check_phys_apicid_present(int cpu_physical_apicid)
-{
-	boot_cpu_physical_apicid = read_apic_id();
-	return (1);
-}
-
-static inline unsigned int
-cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
-{
-	int num_bits_set;
-	int cpus_found = 0;
-	int cpu;
-	int apicid;
-
-	num_bits_set = cpumask_weight(cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of TARGET_CPUS.
-	 */
-	cpu = cpumask_first(cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpumask_test_cpu(cpu, cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)){
-				printk ("%s: Not a valid mask!\n", __func__);
-				return 0xFF;
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int num_bits_set;
-	int cpus_found = 0;
-	int cpu;
-	int apicid;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return cpu_to_logical_apicid(0);
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of TARGET_CPUS.
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)){
-				printk ("%s: Not a valid mask!\n", __func__);
-				return cpu_to_logical_apicid(0);
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
-						  const struct cpumask *andmask)
-{
-	int apicid = cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-	return apicid;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_ES7000_APIC_H */

arch/x86/include/asm/es7000/apicdef.h

@@ -1,13 +0,0 @@
-#ifndef __ASM_ES7000_APICDEF_H
-#define __ASM_ES7000_APICDEF_H
-
-#define		APIC_ID_MASK		(0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
-	return (((x)>>24)&0xFF);
-}
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
-#endif

arch/x86/include/asm/es7000/ipi.h

@@ -1,22 +0,0 @@
-#ifndef __ASM_ES7000_IPI_H
-#define __ASM_ES7000_IPI_H
-
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_ES7000_IPI_H */

arch/x86/include/asm/es7000/mpparse.h

@@ -1,29 +0,0 @@
-#ifndef __ASM_ES7000_MPPARSE_H
-#define __ASM_ES7000_MPPARSE_H
-
-#include <linux/acpi.h>
-
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
-extern void setup_unisys(void);
-
-#ifndef CONFIG_X86_GENERICARCH
-extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
-extern int mps_oem_check(struct mpc_table *mpc, char *oem, char *productid);
-#endif
-
-#ifdef CONFIG_ACPI
-
-static inline int es7000_check_dsdt(void)
-{
-	struct acpi_table_header header;
-
-	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
-	    !strncmp(header.oem_id, "UNISYS", 6))
-		return 1;
-	return 0;
-}
-#endif
-
-#endif /* __ASM_MACH_MPPARSE_H */

arch/x86/include/asm/es7000/wakecpu.h

@@ -1,37 +0,0 @@
-#ifndef __ASM_ES7000_WAKECPU_H
-#define __ASM_ES7000_WAKECPU_H
-
-#define TRAMPOLINE_PHYS_LOW	0x467
-#define TRAMPOLINE_PHYS_HIGH	0x469
-
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-#ifndef CONFIG_ES7000_CLUSTERED_APIC
-	while (!atomic_read(deassert))
-		cpu_relax();
-#endif
-	return;
-}
-
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-extern void __inquire_remote_apic(int apicid);
-
-static inline void inquire_remote_apic(int apicid)
-{
-	if (apic_verbosity >= APIC_DEBUG)
-		__inquire_remote_apic(apicid);
-}
-
-#endif /* __ASM_MACH_WAKECPU_H */

arch/x86/include/asm/fixmap_32.h

@@ -95,10 +95,6 @@ enum fixed_addresses {
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
 	FIX_WP_TEST,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
 	FIX_OHCI1394_BASE,
 #endif

arch/x86/include/asm/fixmap_64.h

@@ -50,10 +50,6 @@ enum fixed_addresses {
 	FIX_PARAVIRT_BOOTMAP,
 #endif
 	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
 	FIX_OHCI1394_BASE,
 #endif

arch/x86/include/asm/genapic.h

@@ -1,5 +1,263 @@
+#ifndef _ASM_X86_GENAPIC_H
+#define _ASM_X86_GENAPIC_H
+
+#include <linux/cpumask.h>
+
+#include <asm/mpspec.h>
+#include <asm/atomic.h>
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch data struct.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+struct genapic {
+	char *name;
+
+	int (*probe)(void);
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+	int (*apic_id_registered)(void);
+
+	u32 irq_delivery_mode;
+	u32 irq_dest_mode;
+
+	const struct cpumask *(*target_cpus)(void);
+
+	int disable_esr;
+
+	int dest_logical;
+	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_present)(int apicid);
+
+	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
+	void (*init_apic_ldr)(void);
+
+	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+
+	void (*setup_apic_routing)(void);
+	int (*multi_timer_check)(int apic, int irq);
+	int (*apicid_to_node)(int logical_apicid);
+	int (*cpu_to_logical_apicid)(int cpu);
+	int (*cpu_present_to_apicid)(int mps_cpu);
+	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*setup_portio_remap)(void);
+	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	void (*enable_apic_mode)(void);
+	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
+
+	/*
+	 * When one of the next two hooks returns 1 the genapic
+	 * is switched to this. Essentially they are additional
+	 * probe functions:
+	 */
+	int (*mps_oem_check)(struct mpc_table *mpc, char *oem, char *productid);
+
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
+	unsigned long apic_id_mask;
+
+	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
+	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
+					       const struct cpumask *andmask);
+
+	/* ipi */
+	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
+	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
+					 int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+	void (*send_IPI_self)(int vector);
+
+	/* wakeup_secondary_cpu */
+	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
+
+	int trampoline_phys_low;
+	int trampoline_phys_high;
+
+	void (*wait_for_init_deassert)(atomic_t *deassert);
+	void (*smp_callin_clear_local_apic)(void);
+	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
+	void (*inquire_remote_apic)(int apicid);
+};
+
+extern struct genapic *apic;
+
+/*
+ * Warm reset vector default position:
+ */
+#define DEFAULT_TRAMPOLINE_PHYS_LOW		0x467
+#define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
+
 #ifdef CONFIG_X86_32
-# include "genapic_32.h"
+extern void es7000_update_genapic_to_cluster(void);
 #else
-# include "genapic_64.h"
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2apic_cluster;
+extern struct genapic apic_x2apic_phys;
+extern int default_acpi_madt_oem_check(char *, char *);
+
+extern void apic_send_IPI_self(int vector);
+
+extern struct genapic apic_x2apic_uv_x;
+DECLARE_PER_CPU(int, x2apic_extra_bits);
+
+extern void default_setup_apic_routing(void);
+
+extern int default_cpu_present_to_apicid(int mps_cpu);
+extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
 #endif
+
+static inline void default_wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert))
+		cpu_relax();
+	return;
+}
+
+extern void generic_bigsmp_probe(void);
+
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+static inline const struct cpumask *default_target_cpus(void)
+{
+#ifdef CONFIG_SMP
+	return cpu_online_mask;
+#else
+	return cpumask_of(0);
+#endif
+}
+
+DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
+
+
+static inline unsigned int read_apic_id(void)
+{
+	unsigned int reg;
+
+	reg = apic_read(APIC_ID);
+
+	return apic->get_apic_id(reg);
+}
+
+#ifdef CONFIG_X86_64
+extern void default_setup_apic_routing(void);
+#else
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+extern void default_init_apic_ldr(void);
+
+static inline int default_apic_id_registered(void)
+{
+	return physid_isset(read_apic_id(), phys_cpu_present_map);
+}
+
+static inline unsigned int
+default_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	return cpumask_bits(cpumask)[0];
+}
+
+static inline unsigned int
+default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			       const struct cpumask *andmask)
+{
+	unsigned long mask1 = cpumask_bits(cpumask)[0];
+	unsigned long mask2 = cpumask_bits(andmask)[0];
+	unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];
+
+	return (unsigned int)(mask1 & mask2 & mask3);
+}
+
+static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+static inline void default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+					"Flat", nr_ioapics);
+#endif
+}
+
+extern int default_apicid_to_node(int logical_apicid);
+
+#endif
+
+static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long default_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	return phys_map;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int default_cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int __default_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline int
+__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+#ifdef CONFIG_X86_32
+static inline int default_cpu_present_to_apicid(int mps_cpu)
+{
+	return __default_cpu_present_to_apicid(mps_cpu);
+}
+
+static inline int
+default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
+#else
+extern int default_cpu_present_to_apicid(int mps_cpu);
+extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
+#endif
+
+static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#endif /* _ASM_X86_GENAPIC_64_H */

arch/x86/include/asm/genapic_32.h

@@ -1,141 +0,0 @@
-#ifndef _ASM_X86_GENAPIC_32_H
-#define _ASM_X86_GENAPIC_32_H
-
-#include <asm/mpspec.h>
-#include <asm/atomic.h>
-
-/*
- * Generic APIC driver interface.
- *
- * An straight forward mapping of the APIC related parts of the
- * x86 subarchitecture interface to a dynamic object.
- *
- * This is used by the "generic" x86 subarchitecture.
- *
- * Copyright 2003 Andi Kleen, SuSE Labs.
- */
-
-struct mpc_bus;
-struct mpc_table;
-struct mpc_cpu;
-
-struct genapic {
-	char *name;
-	int (*probe)(void);
-
-	int (*apic_id_registered)(void);
-	const struct cpumask *(*target_cpus)(void);
-	int int_delivery_mode;
-	int int_dest_mode;
-	int ESR_DISABLE;
-	int apic_destination_logical;
-	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
-	unsigned long (*check_apicid_present)(int apicid);
-	int no_balance_irq;
-	int no_ioapic_check;
-	void (*init_apic_ldr)(void);
-	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
-
-	void (*setup_apic_routing)(void);
-	int (*multi_timer_check)(int apic, int irq);
-	int (*apicid_to_node)(int logical_apicid);
-	int (*cpu_to_logical_apicid)(int cpu);
-	int (*cpu_present_to_apicid)(int mps_cpu);
-	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
-	void (*setup_portio_remap)(void);
-	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
-	void (*enable_apic_mode)(void);
-	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
-
-	/* mpparse */
-	/* When one of the next two hooks returns 1 the genapic
-	   is switched to this. Essentially they are additional probe
-	   functions. */
-	int (*mps_oem_check)(struct mpc_table *mpc, char *oem,
-			     char *productid);
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
-
-	unsigned (*get_apic_id)(unsigned long x);
-	unsigned long apic_id_mask;
-	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
-	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
-					       const struct cpumask *andmask);
-	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
-
-#ifdef CONFIG_SMP
-	/* ipi */
-	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
-	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
-					 int vector);
-	void (*send_IPI_allbutself)(int vector);
-	void (*send_IPI_all)(int vector);
-#endif
-	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
-	int trampoline_phys_low;
-	int trampoline_phys_high;
-	void (*wait_for_init_deassert)(atomic_t *deassert);
-	void (*smp_callin_clear_local_apic)(void);
-	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*inquire_remote_apic)(int apicid);
-};
-
-#define APICFUNC(x) .x = x,
-
-/* More functions could be probably marked IPIFUNC and save some space
-   in UP GENERICARCH kernels, but I don't have the nerve right now
-   to untangle this mess. -AK  */
-#ifdef CONFIG_SMP
-#define IPIFUNC(x) APICFUNC(x)
-#else
-#define IPIFUNC(x)
-#endif
-
-#define APIC_INIT(aname, aprobe)			\
-{							\
-	.name = aname,					\
-	.probe = aprobe,				\
-	.int_delivery_mode = INT_DELIVERY_MODE,		\
-	.int_dest_mode = INT_DEST_MODE,			\
-	.no_balance_irq = NO_BALANCE_IRQ,		\
-	.ESR_DISABLE = esr_disable,			\
-	.apic_destination_logical = APIC_DEST_LOGICAL,	\
-	APICFUNC(apic_id_registered)			\
-	APICFUNC(target_cpus)				\
-	APICFUNC(check_apicid_used)			\
-	APICFUNC(check_apicid_present)			\
-	APICFUNC(init_apic_ldr)				\
-	APICFUNC(ioapic_phys_id_map)			\
-	APICFUNC(setup_apic_routing)			\
-	APICFUNC(multi_timer_check)			\
-	APICFUNC(apicid_to_node)			\
-	APICFUNC(cpu_to_logical_apicid)			\
-	APICFUNC(cpu_present_to_apicid)			\
-	APICFUNC(apicid_to_cpu_present)			\
-	APICFUNC(setup_portio_remap)			\
-	APICFUNC(check_phys_apicid_present)		\
-	APICFUNC(mps_oem_check)				\
-	APICFUNC(get_apic_id)				\
-	.apic_id_mask = APIC_ID_MASK,			\
-	APICFUNC(cpu_mask_to_apicid)			\
-	APICFUNC(cpu_mask_to_apicid_and)		\
-	APICFUNC(vector_allocation_domain)		\
-	APICFUNC(acpi_madt_oem_check)			\
-	IPIFUNC(send_IPI_mask)				\
-	IPIFUNC(send_IPI_allbutself)			\
-	IPIFUNC(send_IPI_all)				\
-	APICFUNC(enable_apic_mode)			\
-	APICFUNC(phys_pkg_id)				\
-	.trampoline_phys_low = TRAMPOLINE_PHYS_LOW,		\
-	.trampoline_phys_high = TRAMPOLINE_PHYS_HIGH,		\
-	APICFUNC(wait_for_init_deassert)		\
-	APICFUNC(smp_callin_clear_local_apic)		\
-	APICFUNC(store_NMI_vector)			\
-	APICFUNC(restore_NMI_vector)			\
-	APICFUNC(inquire_remote_apic)			\
-}
-
-extern struct genapic *genapic;
-extern void es7000_update_genapic_to_cluster(void);
-
-#endif /* _ASM_X86_GENAPIC_32_H */

arch/x86/include/asm/genapic_64.h

@@ -1,60 +0,0 @@
-#ifndef _ASM_X86_GENAPIC_64_H
-#define _ASM_X86_GENAPIC_64_H
-
-#include <linux/cpumask.h>
-
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch data struct.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-
-struct genapic {
-	char *name;
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
-	u32 int_delivery_mode;
-	u32 int_dest_mode;
-	int (*apic_id_registered)(void);
-	const struct cpumask *(*target_cpus)(void);
-	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
-	void (*init_apic_ldr)(void);
-	/* ipi */
-	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
-	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
-					 int vector);
-	void (*send_IPI_allbutself)(int vector);
-	void (*send_IPI_all)(int vector);
-	void (*send_IPI_self)(int vector);
-	/* */
-	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
-	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
-					       const struct cpumask *andmask);
-	unsigned int (*phys_pkg_id)(int index_msb);
-	unsigned int (*get_apic_id)(unsigned long x);
-	unsigned long (*set_apic_id)(unsigned int id);
-	unsigned long apic_id_mask;
-	/* wakeup_secondary_cpu */
-	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
-};
-
-extern struct genapic *genapic;
-
-extern struct genapic apic_flat;
-extern struct genapic apic_physflat;
-extern struct genapic apic_x2apic_cluster;
-extern struct genapic apic_x2apic_phys;
-extern int acpi_madt_oem_check(char *, char *);
-
-extern void apic_send_IPI_self(int vector);
-
-extern struct genapic apic_x2apic_uv_x;
-DECLARE_PER_CPU(int, x2apic_extra_bits);
-
-extern void setup_apic_routing(void);
-
-#endif /* _ASM_X86_GENAPIC_64_H */

arch/x86/include/asm/hw_irq.h

@@ -25,8 +25,6 @@
 #include <asm/irq.h>
 #include <asm/sections.h>
 
-#define platform_legacy_irq(irq)	((irq) < 16)
-
 /* Interrupt handlers registered during init_IRQ */
 extern void apic_timer_interrupt(void);
 extern void error_interrupt(void);
@@ -60,7 +58,7 @@ extern void make_8259A_irq(unsigned int irq);
 extern void init_8259A(int aeoi);
 
 /* IOAPIC */
-#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
+#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
 extern unsigned long io_apic_irqs;
 
 extern void init_VISWS_APIC_irqs(void);
@@ -69,15 +67,7 @@ extern void disable_IO_APIC(void);
 extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
 extern void setup_ioapic_dest(void);
 
-#ifdef CONFIG_X86_64
 extern void enable_IO_APIC(void);
-#endif
-
-/* IPI functions */
-#ifdef CONFIG_X86_32
-extern void send_IPI_self(int vector);
-#endif
-extern void send_IPI(int dest, int vector);
 
 /* Statistics */
 extern atomic_t irq_err_count;
@@ -86,21 +76,11 @@ extern atomic_t irq_mis_count;
 /* EISA */
 extern void eisa_set_level_irq(unsigned int irq);
 
-/* Voyager functions */
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
-
 /* SMP */
 extern void smp_apic_timer_interrupt(struct pt_regs *);
 extern void smp_spurious_interrupt(struct pt_regs *);
 extern void smp_error_interrupt(struct pt_regs *);
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 extern void smp_reschedule_interrupt(struct pt_regs *);
 extern void smp_call_function_interrupt(struct pt_regs *);
 extern void smp_call_function_single_interrupt(struct pt_regs *);

arch/x86/include/asm/io.h

@@ -5,6 +5,7 @@
 
 #include <linux/compiler.h>
 #include <asm-generic/int-ll64.h>
+#include <asm/page.h>
 
 #define build_mmio_read(name, size, type, reg, barrier) \
 static inline type name(const volatile void __iomem *addr) \
@@ -80,6 +81,95 @@ static inline void writeq(__u64 val, volatile void __iomem *addr)
 #define readq			readq
 #define writeq			writeq
 
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline phys_addr_t virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline void *phys_to_virt(phys_addr_t address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * If the area you are trying to map is a PCI BAR you should have a
+ * look at pci_iomap().
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+	return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+
 #ifdef CONFIG_X86_32
 # include "io_32.h"
 #else
@@ -91,7 +181,7 @@ extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
 
 extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
 				unsigned long prot_val);
-extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
+extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
 
 /*
  * early_ioremap() and early_iounmap() are for temporary early boot-time
@@ -105,5 +195,6 @@ extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
 extern void early_iounmap(void __iomem *addr, unsigned long size);
 extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
+#define IO_SPACE_LIMIT 0xffff
 
 #endif /* _ASM_X86_IO_H */

arch/x86/include/asm/io_32.h

@@ -37,8 +37,6 @@
   *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
   */
 
-#define IO_SPACE_LIMIT 0xffff
-
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
@@ -53,92 +51,6 @@
  */
 #define xlate_dev_kmem_ptr(p)	p
 
-/**
- *	virt_to_phys	-	map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-/**
- *	phys_to_virt	-	map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-/**
- * ioremap     -   map bus memory into CPU space
- * @offset:    bus address of the memory
- * @size:      size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * If the area you are trying to map is a PCI BAR you should have a
- * look at pci_iomap().
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
-				unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
-	return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
 static inline void
 memset_io(volatile void __iomem *addr, unsigned char val, int count)
 {

arch/x86/include/asm/io_64.h

@@ -136,73 +136,12 @@ __OUTS(b)
 __OUTS(w)
 __OUTS(l)
 
-#define IO_SPACE_LIMIT 0xffff
-
 #if defined(__KERNEL__) && defined(__x86_64__)
 
 #include <linux/vmalloc.h>
 
-#ifndef __i386__
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-#endif
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
 #include <asm-generic/iomap.h>
 
-/*
- * This one maps high address device memory and turns off caching for that area.
- * it's useful if some control registers are in such an area and write combining
- * or read caching is not desirable:
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
-				unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
-	return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
 void __memcpy_fromio(void *, unsigned long, unsigned);
 void __memcpy_toio(unsigned long, const void *, unsigned);
 

arch/x86/include/asm/io_apic.h

@@ -143,15 +143,6 @@ extern int noioapicreroute;
 /* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
 extern int timer_through_8259;
 
-static inline void disable_ioapic_setup(void)
-{
-#ifdef CONFIG_PCI
-	noioapicquirk = 1;
-	noioapicreroute = -1;
-#endif
-	skip_ioapic_setup = 1;
-}
-
 /*
  * If we use the IO-APIC for IRQ routing, disable automatic
  * assignment of PCI IRQ's.
@@ -178,6 +169,12 @@ extern void reinit_intr_remapped_IO_APIC(int);
 
 extern void probe_nr_irqs_gsi(void);
 
+extern int setup_ioapic_entry(int apic, int irq,
+			      struct IO_APIC_route_entry *entry,
+			      unsigned int destination, int trigger,
+			      int polarity, int vector);
+extern void ioapic_write_entry(int apic, int pin,
+			       struct IO_APIC_route_entry e);
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;

arch/x86/include/asm/ipi.h

@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_IPI_H
 #define _ASM_X86_IPI_H
 
+#ifdef CONFIG_X86_LOCAL_APIC
+
 /*
  * Copyright 2004 James Cleverdon, IBM.
  * Subject to the GNU Public License, v.2
@@ -55,8 +57,8 @@ static inline void __xapic_wait_icr_idle(void)
 		cpu_relax();
 }
 
-static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
-				       unsigned int dest)
+static inline void
+__default_send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest)
 {
 	/*
 	 * Subtle. In the case of the 'never do double writes' workaround
@@ -87,8 +89,8 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
  * This is used to send an IPI with no shorthand notation (the destination is
  * specified in bits 56 to 63 of the ICR).
  */
-static inline void __send_IPI_dest_field(unsigned int mask, int vector,
-					 unsigned int dest)
+static inline void
+ __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest)
 {
 	unsigned long cfg;
 
@@ -117,41 +119,46 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector,
 	native_apic_mem_write(APIC_ICR, cfg);
 }
 
-static inline void send_IPI_mask_sequence(const struct cpumask *mask,
-					  int vector)
-{
-	unsigned long flags;
-	unsigned long query_cpu;
+extern void default_send_IPI_mask_sequence_phys(const struct cpumask *mask,
+						 int vector);
+extern void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
+							 int vector);
+#include <asm/genapic.h>
 
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send
-	 * to an arbitrary mask, so I do a unicast to each CPU instead.
-	 * - mbligh
-	 */
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		__send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu),
-				      vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
+extern void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
+							 int vector);
+extern void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask,
+							 int vector);
+
+/* Avoid include hell */
+#define NMI_VECTOR 0x02
+
+extern int no_broadcast;
+
+static inline void __default_local_send_IPI_allbutself(int vector)
+{
+	if (no_broadcast || vector == NMI_VECTOR)
+		apic->send_IPI_mask_allbutself(cpu_online_mask, vector);
+	else
+		__default_send_IPI_shortcut(APIC_DEST_ALLBUT, vector, apic->dest_logical);
 }
 
-static inline void send_IPI_mask_allbutself(const struct cpumask *mask,
-					    int vector)
+static inline void __default_local_send_IPI_all(int vector)
 {
-	unsigned long flags;
-	unsigned int query_cpu;
-	unsigned int this_cpu = smp_processor_id();
-
-	/* See Hack comment above */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
-		if (query_cpu != this_cpu)
-			__send_IPI_dest_field(
-				per_cpu(x86_cpu_to_apicid, query_cpu),
-				vector, APIC_DEST_PHYSICAL);
-	local_irq_restore(flags);
+	if (no_broadcast || vector == NMI_VECTOR)
+		apic->send_IPI_mask(cpu_online_mask, vector);
+	else
+		__default_send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->dest_logical);
 }
 
+#ifdef CONFIG_X86_32
+extern void default_send_IPI_mask_logical(const struct cpumask *mask,
+						 int vector);
+extern void default_send_IPI_allbutself(int vector);
+extern void default_send_IPI_all(int vector);
+extern void default_send_IPI_self(int vector);
+#endif
+
+#endif
+
 #endif /* _ASM_X86_IPI_H */

arch/x86/include/asm/irq.h

@@ -36,9 +36,11 @@ static inline int irq_canonicalize(int irq)
 extern void fixup_irqs(void);
 #endif
 
-extern unsigned int do_IRQ(struct pt_regs *regs);
 extern void init_IRQ(void);
 extern void native_init_IRQ(void);
+extern bool handle_irq(unsigned irq, struct pt_regs *regs);
+
+extern unsigned int do_IRQ(struct pt_regs *regs);
 
 /* Interrupt vector management */
 extern DECLARE_BITMAP(used_vectors, NR_VECTORS);

arch/x86/include/asm/irq_vectors.h

@@ -1,47 +1,69 @@
 #ifndef _ASM_X86_IRQ_VECTORS_H
 #define _ASM_X86_IRQ_VECTORS_H
 
-#include <linux/threads.h>
+/*
+ * Linux IRQ vector layout.
+ *
+ * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
+ * be defined by Linux. They are used as a jump table by the CPU when a
+ * given vector is triggered - by a CPU-external, CPU-internal or
+ * software-triggered event.
+ *
+ * Linux sets the kernel code address each entry jumps to early during
+ * bootup, and never changes them. This is the general layout of the
+ * IDT entries:
+ *
+ *  Vectors   0 ...  31 : system traps and exceptions - hardcoded events
+ *  Vectors  32 ... 127 : device interrupts
+ *  Vector  128         : legacy int80 syscall interface
+ *  Vectors 129 ... 237 : device interrupts
+ *  Vectors 238 ... 255 : special interrupts
+ *
+ * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
+ *
+ * This file enumerates the exact layout of them:
+ */
 
-#define NMI_VECTOR		0x02
+#define NMI_VECTOR			0x02
 
 /*
  * IDT vectors usable for external interrupt sources start
  * at 0x20:
  */
-#define FIRST_EXTERNAL_VECTOR	0x20
+#define FIRST_EXTERNAL_VECTOR		0x20
 
 #ifdef CONFIG_X86_32
-# define SYSCALL_VECTOR		0x80
+# define SYSCALL_VECTOR			0x80
 #else
-# define IA32_SYSCALL_VECTOR	0x80
+# define IA32_SYSCALL_VECTOR		0x80
 #endif
 
 /*
  * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
  * cleanup after irq migration.
  */
-#define IRQ_MOVE_CLEANUP_VECTOR	FIRST_EXTERNAL_VECTOR
+#define IRQ_MOVE_CLEANUP_VECTOR		FIRST_EXTERNAL_VECTOR
 
 /*
  * Vectors 0x30-0x3f are used for ISA interrupts.
  */
-#define IRQ0_VECTOR		(FIRST_EXTERNAL_VECTOR + 0x10)
-#define IRQ1_VECTOR		(IRQ0_VECTOR + 1)
-#define IRQ2_VECTOR		(IRQ0_VECTOR + 2)
-#define IRQ3_VECTOR		(IRQ0_VECTOR + 3)
-#define IRQ4_VECTOR		(IRQ0_VECTOR + 4)
-#define IRQ5_VECTOR		(IRQ0_VECTOR + 5)
-#define IRQ6_VECTOR		(IRQ0_VECTOR + 6)
-#define IRQ7_VECTOR		(IRQ0_VECTOR + 7)
-#define IRQ8_VECTOR		(IRQ0_VECTOR + 8)
-#define IRQ9_VECTOR		(IRQ0_VECTOR + 9)
-#define IRQ10_VECTOR		(IRQ0_VECTOR + 10)
-#define IRQ11_VECTOR		(IRQ0_VECTOR + 11)
-#define IRQ12_VECTOR		(IRQ0_VECTOR + 12)
-#define IRQ13_VECTOR		(IRQ0_VECTOR + 13)
-#define IRQ14_VECTOR		(IRQ0_VECTOR + 14)
-#define IRQ15_VECTOR		(IRQ0_VECTOR + 15)
+#define IRQ0_VECTOR			(FIRST_EXTERNAL_VECTOR + 0x10)
+
+#define IRQ1_VECTOR			(IRQ0_VECTOR +  1)
+#define IRQ2_VECTOR			(IRQ0_VECTOR +  2)
+#define IRQ3_VECTOR			(IRQ0_VECTOR +  3)
+#define IRQ4_VECTOR			(IRQ0_VECTOR +  4)
+#define IRQ5_VECTOR			(IRQ0_VECTOR +  5)
+#define IRQ6_VECTOR			(IRQ0_VECTOR +  6)
+#define IRQ7_VECTOR			(IRQ0_VECTOR +  7)
+#define IRQ8_VECTOR			(IRQ0_VECTOR +  8)
+#define IRQ9_VECTOR			(IRQ0_VECTOR +  9)
+#define IRQ10_VECTOR			(IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR			(IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR			(IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR			(IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR			(IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR			(IRQ0_VECTOR + 15)
 
 /*
  * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
@@ -50,43 +72,44 @@
  *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
  *  TLB, reschedule and local APIC vectors are performance-critical.
  */
-#ifdef CONFIG_X86_32
 
-# define SPURIOUS_APIC_VECTOR		0xff
-# define ERROR_APIC_VECTOR		0xfe
-# define RESCHEDULE_VECTOR		0xfd
-# define CALL_FUNCTION_VECTOR		0xfc
-# define CALL_FUNCTION_SINGLE_VECTOR	0xfb
-# define THERMAL_APIC_VECTOR		0xfa
-/* 0xf8 - 0xf9 : free */
-# define INVALIDATE_TLB_VECTOR_END	0xf7
-# define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
+#define SPURIOUS_APIC_VECTOR		0xff
+/*
+ * Sanity check
+ */
+#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
+# error SPURIOUS_APIC_VECTOR definition error
+#endif
 
-# define NUM_INVALIDATE_TLB_VECTORS	8
+#define ERROR_APIC_VECTOR		0xfe
+#define RESCHEDULE_VECTOR		0xfd
+#define CALL_FUNCTION_VECTOR		0xfc
+#define CALL_FUNCTION_SINGLE_VECTOR	0xfb
+#define THERMAL_APIC_VECTOR		0xfa
 
+#ifdef CONFIG_X86_32
+/* 0xf8 - 0xf9 : free */
 #else
-
-# define SPURIOUS_APIC_VECTOR		0xff
-# define ERROR_APIC_VECTOR		0xfe
-# define RESCHEDULE_VECTOR		0xfd
-# define CALL_FUNCTION_VECTOR		0xfc
-# define CALL_FUNCTION_SINGLE_VECTOR	0xfb
-# define THERMAL_APIC_VECTOR		0xfa
 # define THRESHOLD_APIC_VECTOR		0xf9
 # define UV_BAU_MESSAGE			0xf8
-# define INVALIDATE_TLB_VECTOR_END	0xf7
-# define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
-
-#define NUM_INVALIDATE_TLB_VECTORS	8
-
 #endif
 
+/* f0-f7 used for spreading out TLB flushes: */
+#define INVALIDATE_TLB_VECTOR_END	0xf7
+#define INVALIDATE_TLB_VECTOR_START	0xf0
+#define NUM_INVALIDATE_TLB_VECTORS	   8
+
 /*
  * Local APIC timer IRQ vector is on a different priority level,
  * to work around the 'lost local interrupt if more than 2 IRQ
  * sources per level' errata.
  */
-#define LOCAL_TIMER_VECTOR	0xef
+#define LOCAL_TIMER_VECTOR		0xef
+
+/*
+ * Performance monitoring interrupt vector:
+ */
+#define LOCAL_PERF_VECTOR		0xee
 
 /*
  * Performance monitoring interrupt vector:
@@ -98,80 +121,53 @@
  * start at 0x31(0x41) to spread out vectors evenly between priority
  * levels. (0x80 is the syscall vector)
  */
-#define FIRST_DEVICE_VECTOR	(IRQ15_VECTOR + 2)
-
-#define NR_VECTORS		256
-
-#define FPU_IRQ			13
-
-#define	FIRST_VM86_IRQ		3
-#define LAST_VM86_IRQ		15
-#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+#define FIRST_DEVICE_VECTOR		(IRQ15_VECTOR + 2)
 
-#define NR_IRQS_LEGACY		16
+#define NR_VECTORS			 256
 
-#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER)
-
-#include <asm/apicnum.h>	/* need MAX_IO_APICS */
-
-#ifndef CONFIG_SPARSE_IRQ
-# if NR_CPUS < MAX_IO_APICS
-#  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
-# else
-#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
-# endif
-#else
+#define FPU_IRQ				  13
 
-# define NR_IRQS					\
-	((8 * NR_CPUS) > (32 * MAX_IO_APICS) ?		\
-		(NR_VECTORS + (8 * NR_CPUS)) :		\
-		(NR_VECTORS + (32 * MAX_IO_APICS)))	\
+#define	FIRST_VM86_IRQ			   3
+#define LAST_VM86_IRQ			  15
 
+#ifndef __ASSEMBLY__
+static inline int invalid_vm86_irq(int irq)
+{
+	return irq < 3 || irq > 15;
+}
 #endif
 
-#elif defined(CONFIG_X86_VOYAGER)
-
-# define NR_IRQS		224
+/*
+ * Size the maximum number of interrupts.
+ *
+ * If the irq_desc[] array has a sparse layout, we can size things
+ * generously - it scales up linearly with the maximum number of CPUs,
+ * and the maximum number of IO-APICs, whichever is higher.
+ *
+ * In other cases we size more conservatively, to not create too large
+ * static arrays.
+ */
 
-#else /* IO_APIC || VOYAGER */
+#define NR_IRQS_LEGACY			  16
 
-# define NR_IRQS		16
+#define CPU_VECTOR_LIMIT		(  8 * NR_CPUS      )
+#define IO_APIC_VECTOR_LIMIT		( 32 * MAX_IO_APICS )
 
+#ifdef CONFIG_X86_IO_APIC
+# ifdef CONFIG_SPARSE_IRQ
+#  define NR_IRQS					\
+	(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ?	\
+		(NR_VECTORS + CPU_VECTOR_LIMIT)  :	\
+		(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
+# else
+#  if NR_CPUS < MAX_IO_APICS
+#   define NR_IRQS 			(NR_VECTORS + 4*CPU_VECTOR_LIMIT)
+#  else
+#   define NR_IRQS			(NR_VECTORS + IO_APIC_VECTOR_LIMIT)
+#  endif
+# endif
+#else /* !CONFIG_X86_IO_APIC: */
+# define NR_IRQS			NR_IRQS_LEGACY
 #endif
 
-/* Voyager specific defines */
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0			0
-#define VIC_CPI_LEVEL1			1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI			2
-#define VIC_INVALIDATE_CPI		3
-#define VIC_RESCHEDULE_CPI		4
-#define VIC_ENABLE_IRQ_CPI		5
-#define VIC_CALL_FUNCTION_CPI		6
-#define VIC_CALL_FUNCTION_SINGLE_CPI	7
-
-/* Now the QIC CPIs:  Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET			1
-#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT			8
-#define VIC_CMN_INT			15
-
-/* This is the boot CPI for alternate processors.  It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
-
-
 #endif /* _ASM_X86_IRQ_VECTORS_H */

arch/x86/include/asm/kexec.h

@@ -9,23 +9,8 @@
 # define PAGES_NR		4
 #else
 # define PA_CONTROL_PAGE	0
-# define VA_CONTROL_PAGE	1
-# define PA_PGD			2
-# define VA_PGD			3
-# define PA_PUD_0		4
-# define VA_PUD_0		5
-# define PA_PMD_0		6
-# define VA_PMD_0		7
-# define PA_PTE_0		8
-# define VA_PTE_0		9
-# define PA_PUD_1		10
-# define VA_PUD_1		11
-# define PA_PMD_1		12
-# define VA_PMD_1		13
-# define PA_PTE_1		14
-# define VA_PTE_1		15
-# define PA_TABLE_PAGE		16
-# define PAGES_NR		17
+# define PA_TABLE_PAGE		1
+# define PAGES_NR		2
 #endif
 
 #ifdef CONFIG_X86_32
@@ -157,9 +142,9 @@ relocate_kernel(unsigned long indirection_page,
 		unsigned long start_address) ATTRIB_NORET;
 #endif
 
-#ifdef CONFIG_X86_32
 #define ARCH_HAS_KIMAGE_ARCH
 
+#ifdef CONFIG_X86_32
 struct kimage_arch {
 	pgd_t *pgd;
 #ifdef CONFIG_X86_PAE
@@ -169,6 +154,12 @@ struct kimage_arch {
 	pte_t *pte0;
 	pte_t *pte1;
 };
+#else
+struct kimage_arch {
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+};
 #endif
 
 #endif /* __ASSEMBLY__ */

arch/x86/include/asm/mach-default/mach_apic.h

@@ -1,168 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_APIC_H
-#define _ASM_X86_MACH_DEFAULT_MACH_APIC_H
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-#include <mach_apicdef.h>
-#include <asm/smp.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
-
-static inline const struct cpumask *target_cpus(void)
-{ 
-#ifdef CONFIG_SMP
-	return cpu_online_mask;
-#else
-	return cpumask_of(0);
-#endif
-} 
-
-#define NO_BALANCE_IRQ (0)
-#define esr_disable (0)
-
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
-#define TARGET_CPUS	  (genapic->target_cpus())
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define cpu_mask_to_apicid_and (genapic->cpu_mask_to_apicid_and)
-#define phys_pkg_id	(genapic->phys_pkg_id)
-#define vector_allocation_domain    (genapic->vector_allocation_domain)
-#define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
-#define send_IPI_self (genapic->send_IPI_self)
-#define wakeup_secondary_cpu (genapic->wakeup_cpu)
-extern void setup_apic_routing(void);
-#else
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
-#define TARGET_CPUS (target_cpus())
-#define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
-	unsigned long val;
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-	apic_write(APIC_LDR, val);
-}
-
-static inline int apic_id_registered(void)
-{
-	return physid_isset(read_apic_id(), phys_cpu_present_map);
-}
-
-static inline unsigned int cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	return cpumask_bits(cpumask)[0];
-}
-
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
-{
-	unsigned long mask1 = cpumask_bits(cpumask)[0];
-	unsigned long mask2 = cpumask_bits(andmask)[0];
-	unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];
-
-	return (unsigned int)(mask1 & mask2 & mask3);
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-static inline void setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-					"Flat", nr_ioapics);
-#endif
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-static inline void vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-        /* Careful. Some cpus do not strictly honor the set of cpus
-         * specified in the interrupt destination when using lowest
-         * priority interrupt delivery mode.
-         *
-         * In particular there was a hyperthreading cpu observed to
-         * deliver interrupts to the wrong hyperthread when only one
-         * hyperthread was specified in the interrupt desitination.
-         */
-	*retmask = (cpumask_t) { { [0] = APIC_ALL_CPUS } };
-}
-#endif
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	return phys_map;
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-	return 1 << cpu;
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-#endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_APIC_H */

arch/x86/include/asm/mach-default/mach_apicdef.h

@@ -1,24 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
-#define _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
-
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_64
-#define	APIC_ID_MASK		(genapic->apic_id_mask)
-#define GET_APIC_ID(x)		(genapic->get_apic_id(x))
-#define	SET_APIC_ID(x)		(genapic->set_apic_id(x))
-#else
-#define		APIC_ID_MASK		(0xF<<24)
-static inline unsigned get_apic_id(unsigned long x) 
-{
-	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
-	if (APIC_XAPIC(ver))
-		return (((x)>>24)&0xFF);
-	else
-		return (((x)>>24)&0xF);
-} 
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-#endif
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H */

arch/x86/include/asm/mach-default/mach_ipi.h

@@ -1,64 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_IPI_H
-#define _ASM_X86_MACH_DEFAULT_MACH_IPI_H
-
-/* Avoid include hell */
-#define NMI_VECTOR 0x02
-
-void send_IPI_mask_bitmask(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-void __send_IPI_shortcut(unsigned int shortcut, int vector);
-
-extern int no_broadcast;
-
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#define send_IPI_mask (genapic->send_IPI_mask)
-#define send_IPI_mask_allbutself (genapic->send_IPI_mask_allbutself)
-#else
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	send_IPI_mask_bitmask(mask, vector);
-}
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-#endif
-
-static inline void __local_send_IPI_allbutself(int vector)
-{
-	if (no_broadcast || vector == NMI_VECTOR)
-		send_IPI_mask_allbutself(cpu_online_mask, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
-}
-
-static inline void __local_send_IPI_all(int vector)
-{
-	if (no_broadcast || vector == NMI_VECTOR)
-		send_IPI_mask(cpu_online_mask, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
-}
-
-#ifdef CONFIG_X86_64
-#define send_IPI_allbutself (genapic->send_IPI_allbutself)
-#define send_IPI_all (genapic->send_IPI_all)
-#else
-static inline void send_IPI_allbutself(int vector)
-{
-	/*
-	 * if there are no other CPUs in the system then we get an APIC send 
-	 * error if we try to broadcast, thus avoid sending IPIs in this case.
-	 */
-	if (!(num_online_cpus() > 1))
-		return;
-
-	__local_send_IPI_allbutself(vector);
-	return;
-}
-
-static inline void send_IPI_all(int vector)
-{
-	__local_send_IPI_all(vector);
-}
-#endif
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_IPI_H */

arch/x86/include/asm/mach-default/mach_mpparse.h

@@ -1,17 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
-#define _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
-
-static inline int
-mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H */

arch/x86/include/asm/mach-default/mach_mpspec.h

@@ -1,12 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
-#define _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-#if CONFIG_BASE_SMALL == 0
-#define MAX_MP_BUSSES 256
-#else
-#define MAX_MP_BUSSES 32
-#endif
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H */

arch/x86/include/asm/mach-default/mach_wakecpu.h

@@ -1,41 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
-#define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
-
-#define TRAMPOLINE_PHYS_LOW (0x467)
-#define TRAMPOLINE_PHYS_HIGH (0x469)
-
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-	while (!atomic_read(deassert))
-		cpu_relax();
-	return;
-}
-
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-#ifdef CONFIG_SMP
-extern void __inquire_remote_apic(int apicid);
-#else /* CONFIG_SMP */
-static inline void __inquire_remote_apic(int apicid)
-{
-}
-#endif /* CONFIG_SMP */
-
-static inline void inquire_remote_apic(int apicid)
-{
-	if (apic_verbosity >= APIC_DEBUG)
-		__inquire_remote_apic(apicid);
-}
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H */

arch/x86/include/asm/mach-generic/gpio.h

@@ -1,15 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_GPIO_H
-#define _ASM_X86_MACH_GENERIC_GPIO_H
-
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-
-#include <asm-generic/gpio.h>           /* cansleep wrappers */
-
-#endif /* _ASM_X86_MACH_GENERIC_GPIO_H */

arch/x86/include/asm/mach-generic/mach_apic.h

@@ -1,35 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_APIC_H
-#define _ASM_X86_MACH_GENERIC_MACH_APIC_H
-
-#include <asm/genapic.h>
-
-#define esr_disable (genapic->ESR_DISABLE)
-#define NO_BALANCE_IRQ (genapic->no_balance_irq)
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL (genapic->apic_destination_logical)
-#define TARGET_CPUS	  (genapic->target_cpus())
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
-#define setup_apic_routing (genapic->setup_apic_routing)
-#define multi_timer_check (genapic->multi_timer_check)
-#define apicid_to_node (genapic->apicid_to_node)
-#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) 
-#define cpu_present_to_apicid (genapic->cpu_present_to_apicid)
-#define apicid_to_cpu_present (genapic->apicid_to_cpu_present)
-#define setup_portio_remap (genapic->setup_portio_remap)
-#define check_apicid_present (genapic->check_apicid_present)
-#define check_phys_apicid_present (genapic->check_phys_apicid_present)
-#define check_apicid_used (genapic->check_apicid_used)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define cpu_mask_to_apicid_and (genapic->cpu_mask_to_apicid_and)
-#define vector_allocation_domain (genapic->vector_allocation_domain)
-#define enable_apic_mode (genapic->enable_apic_mode)
-#define phys_pkg_id (genapic->phys_pkg_id)
-#define wakeup_secondary_cpu (genapic->wakeup_cpu)
-
-extern void generic_bigsmp_probe(void);
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */

arch/x86/include/asm/mach-generic/mach_apicdef.h

@@ -1,11 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
-#define _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
-
-#ifndef APIC_DEFINITION
-#include <asm/genapic.h>
-
-#define GET_APIC_ID (genapic->get_apic_id)
-#define APIC_ID_MASK (genapic->apic_id_mask)
-#endif
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_APICDEF_H */

arch/x86/include/asm/mach-generic/mach_ipi.h

@@ -1,10 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_IPI_H
-#define _ASM_X86_MACH_GENERIC_MACH_IPI_H
-
-#include <asm/genapic.h>
-
-#define send_IPI_mask (genapic->send_IPI_mask)
-#define send_IPI_allbutself (genapic->send_IPI_allbutself)
-#define send_IPI_all (genapic->send_IPI_all)
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_IPI_H */

arch/x86/include/asm/mach-generic/mach_mpparse.h

@@ -1,9 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
-#define _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
-
-
-extern int mps_oem_check(struct mpc_table *, char *, char *);
-
-extern int acpi_madt_oem_check(char *, char *);
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H */

arch/x86/include/asm/mach-generic/mach_mpspec.h

@@ -1,12 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
-#define _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-/* Summit or generic (i.e. installer) kernels need lots of bus entries. */
-/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
-#define MAX_MP_BUSSES 260
-
-extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H */

arch/x86/include/asm/mach-generic/mach_wakecpu.h

@@ -1,12 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
-#define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
-
-#define TRAMPOLINE_PHYS_LOW (genapic->trampoline_phys_low)
-#define TRAMPOLINE_PHYS_HIGH (genapic->trampoline_phys_high)
-#define wait_for_init_deassert (genapic->wait_for_init_deassert)
-#define smp_callin_clear_local_apic (genapic->smp_callin_clear_local_apic)
-#define store_NMI_vector (genapic->store_NMI_vector)
-#define restore_NMI_vector (genapic->restore_NMI_vector)
-#define inquire_remote_apic (genapic->inquire_remote_apic)
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */

arch/x86/include/asm/mach-rdc321x/gpio.h

@@ -1,60 +0,0 @@
-#ifndef _ASM_X86_MACH_RDC321X_GPIO_H
-#define _ASM_X86_MACH_RDC321X_GPIO_H
-
-#include <linux/kernel.h>
-
-extern int rdc_gpio_get_value(unsigned gpio);
-extern void rdc_gpio_set_value(unsigned gpio, int value);
-extern int rdc_gpio_direction_input(unsigned gpio);
-extern int rdc_gpio_direction_output(unsigned gpio, int value);
-extern int rdc_gpio_request(unsigned gpio, const char *label);
-extern void rdc_gpio_free(unsigned gpio);
-extern void __init rdc321x_gpio_setup(void);
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return rdc_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-	rdc_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return rdc_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return rdc_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return rdc_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	rdc_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-/* For cansleep */
-#include <asm-generic/gpio.h>
-
-#endif /* _ASM_X86_MACH_RDC321X_GPIO_H */

arch/x86/include/asm/mmu_context.h

@@ -79,7 +79,7 @@ do {						\
 #ifdef CONFIG_X86_32
 #define deactivate_mm(tsk, mm)			\
 do {						\
-	loadsegment(gs, 0);			\
+	lazy_load_gs(0);			\
 } while (0)
 #else
 #define deactivate_mm(tsk, mm)			\

arch/x86/include/asm/mpspec.h

@@ -9,7 +9,18 @@ extern int apic_version[MAX_APICS];
 extern int pic_mode;
 
 #ifdef CONFIG_X86_32
-#include <mach_mpspec.h>
+
+/*
+ * Summit or generic (i.e. installer) kernels need lots of bus entries.
+ * Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets.
+ */
+#if CONFIG_BASE_SMALL == 0
+# define MAX_MP_BUSSES		260
+#else
+# define MAX_MP_BUSSES		32
+#endif
+
+#define MAX_IRQ_SOURCES		256
 
 extern unsigned int def_to_bigsmp;
 extern u8 apicid_2_node[];
@@ -20,15 +31,15 @@ extern int mp_bus_id_to_local[MAX_MP_BUSSES];
 extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #endif
 
-#define MAX_APICID 256
+#define MAX_APICID		256
 
-#else
+#else /* CONFIG_X86_64: */
 
-#define MAX_MP_BUSSES 256
+#define MAX_MP_BUSSES		256
 /* Each PCI slot may be a combo card with its own bus.  4 IRQ pins per slot. */
-#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
+#define MAX_IRQ_SOURCES		(MAX_MP_BUSSES * 4)
 
-#endif
+#endif /* CONFIG_X86_64 */
 
 extern void early_find_smp_config(void);
 extern void early_get_smp_config(void);
@@ -45,11 +56,13 @@ extern int smp_found_config;
 extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;
 
-extern void find_smp_config(void);
 extern void get_smp_config(void);
+
 #ifdef CONFIG_X86_MPPARSE
+extern void find_smp_config(void);
 extern void early_reserve_e820_mpc_new(void);
 #else
+static inline void find_smp_config(void) { }
 static inline void early_reserve_e820_mpc_new(void) { }
 #endif
 
@@ -64,6 +77,8 @@ extern int acpi_probe_gsi(void);
 #ifdef CONFIG_X86_IO_APIC
 extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 				u32 gsi, int triggering, int polarity);
+extern int mp_find_ioapic(int gsi);
+extern int mp_find_ioapic_pin(int ioapic, int gsi);
 #else
 static inline int
 mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
@@ -148,4 +163,10 @@ static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
 
 extern physid_mask_t phys_cpu_present_map;
 
+extern int generic_mps_oem_check(struct mpc_table *, char *, char *);
+
+extern int default_acpi_madt_oem_check(char *, char *);
+
+extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
+
 #endif /* _ASM_X86_MPSPEC_H */

arch/x86/include/asm/numaq.h

@@ -31,6 +31,8 @@
 extern int found_numaq;
 extern int get_memcfg_numaq(void);
 
+extern void *xquad_portio;
+
 /*
  * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
  */

arch/x86/include/asm/numaq/apic.h

@@ -1,142 +0,0 @@
-#ifndef __ASM_NUMAQ_APIC_H
-#define __ASM_NUMAQ_APIC_H
-
-#include <asm/io.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline const cpumask_t *target_cpus(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-#define NO_BALANCE_IRQ (1)
-#define esr_disable (1)
-
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
- 
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-static inline unsigned long check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline int apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void init_apic_ldr(void)
-{
-	/* Already done in NUMA-Q firmware */
-}
-
-static inline void setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"NUMA-Q", nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int multi_timer_check(int apic, int irq)
-{
-	return apic != 0 && irq == 0;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* We don't have a good way to do this yet - hack */
-	return physids_promote(0xFUL);
-}
-
-/* Mapping from cpu number to logical apicid */
-extern u8 cpu_2_logical_apicid[];
-static inline int cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < 60)
-		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
-	else
-		return BAD_APICID;
-}
-
-static inline int apicid_to_node(int logical_apicid) 
-{
-	return logical_apicid >> 4;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
-{
-	int node = apicid_to_node(logical_apicid);
-	int cpu = __ffs(logical_apicid & 0xf);
-
-	return physid_mask_of_physid(cpu + 4*node);
-}
-
-extern void *xquad_portio;
-
-static inline void setup_portio_remap(void)
-{
-	int num_quads = num_online_nodes();
-
-	if (num_quads <= 1)
-       		return;
-
-	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
-	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
-		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return (1);
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	return (int) 0xF;
-}
-
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
-{
-	return (int) 0xF;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_NUMAQ_APIC_H */

arch/x86/include/asm/numaq/apicdef.h

@@ -1,14 +0,0 @@
-#ifndef __ASM_NUMAQ_APICDEF_H
-#define __ASM_NUMAQ_APICDEF_H
-
-
-#define APIC_ID_MASK (0xF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
-	        return (((x)>>24)&0x0F);
-}
-
-#define         GET_APIC_ID(x)  get_apic_id(x)
-
-#endif

arch/x86/include/asm/numaq/ipi.h

@@ -1,22 +0,0 @@
-#ifndef __ASM_NUMAQ_IPI_H
-#define __ASM_NUMAQ_IPI_H
-
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_NUMAQ_IPI_H */

arch/x86/include/asm/numaq/mpparse.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_NUMAQ_MPPARSE_H
-#define __ASM_NUMAQ_MPPARSE_H
-
-extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
-
-#endif /* __ASM_NUMAQ_MPPARSE_H */

arch/x86/include/asm/numaq/wakecpu.h

@@ -1,45 +0,0 @@
-#ifndef __ASM_NUMAQ_WAKECPU_H
-#define __ASM_NUMAQ_WAKECPU_H
-
-/* This file copes with machines that wakeup secondary CPUs by NMIs */
-
-#define TRAMPOLINE_PHYS_LOW (0x8)
-#define TRAMPOLINE_PHYS_HIGH (0xa)
-
-/* We don't do anything here because we use NMI's to boot instead */
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-}
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
- */
-static inline void smp_callin_clear_local_apic(void)
-{
-	clear_local_APIC();
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk("Storing NMI vector\n");
-	*high =
-	  *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH));
-	*low =
-	  *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW));
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk("Restoring NMI vector\n");
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
-								 *high;
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
-								 *low;
-}
-
-static inline void inquire_remote_apic(int apicid)
-{
-}
-
-#endif /* __ASM_NUMAQ_WAKECPU_H */

arch/x86/include/asm/page.h

@@ -57,7 +57,6 @@ typedef struct { pgdval_t pgd; } pgd_t;
 typedef struct { pgprotval_t pgprot; } pgprot_t;
 
 extern int page_is_ram(unsigned long pagenr);
-extern int pagerange_is_ram(unsigned long start, unsigned long end);
 extern int devmem_is_allowed(unsigned long pagenr);
 extern void map_devmem(unsigned long pfn, unsigned long size,
 		       pgprot_t vma_prot);
@@ -95,6 +94,11 @@ static inline pgdval_t native_pgd_val(pgd_t pgd)
 	return pgd.pgd;
 }
 
+static inline pgdval_t pgd_flags(pgd_t pgd)
+{
+	return native_pgd_val(pgd) & PTE_FLAGS_MASK;
+}
+
 #if PAGETABLE_LEVELS >= 3
 #if PAGETABLE_LEVELS == 4
 typedef struct { pudval_t pud; } pud_t;
@@ -117,6 +121,11 @@ static inline pudval_t native_pud_val(pud_t pud)
 }
 #endif	/* PAGETABLE_LEVELS == 4 */
 
+static inline pudval_t pud_flags(pud_t pud)
+{
+	return native_pud_val(pud) & PTE_FLAGS_MASK;
+}
+
 typedef struct { pmdval_t pmd; } pmd_t;
 
 static inline pmd_t native_make_pmd(pmdval_t val)
@@ -128,6 +137,7 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 {
 	return pmd.pmd;
 }
+
 #else  /* PAGETABLE_LEVELS == 2 */
 #include <asm-generic/pgtable-nopmd.h>
 
@@ -137,6 +147,11 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 }
 #endif	/* PAGETABLE_LEVELS >= 3 */
 
+static inline pmdval_t pmd_flags(pmd_t pmd)
+{
+	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+}
+
 static inline pte_t native_make_pte(pteval_t val)
 {
 	return (pte_t) { .pte = val };
@@ -147,7 +162,7 @@ static inline pteval_t native_pte_val(pte_t pte)
 	return pte.pte;
 }
 
-static inline pteval_t native_pte_flags(pte_t pte)
+static inline pteval_t pte_flags(pte_t pte)
 {
 	return native_pte_val(pte) & PTE_FLAGS_MASK;
 }
@@ -173,7 +188,6 @@ static inline pteval_t native_pte_flags(pte_t pte)
 #endif
 
 #define pte_val(x)	native_pte_val(x)
-#define pte_flags(x)	native_pte_flags(x)
 #define __pte(x)	native_make_pte(x)
 
 #endif	/* CONFIG_PARAVIRT */

arch/x86/include/asm/paravirt.h

@@ -12,21 +12,38 @@
 #define CLBR_EAX  (1 << 0)
 #define CLBR_ECX  (1 << 1)
 #define CLBR_EDX  (1 << 2)
+#define CLBR_EDI  (1 << 3)
 
-#ifdef CONFIG_X86_64
-#define CLBR_RSI  (1 << 3)
-#define CLBR_RDI  (1 << 4)
+#ifdef CONFIG_X86_32
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 4) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
+#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
+#define CLBR_SCRATCH	(0)
+#else
+#define CLBR_RAX  CLBR_EAX
+#define CLBR_RCX  CLBR_ECX
+#define CLBR_RDX  CLBR_EDX
+#define CLBR_RDI  CLBR_EDI
+#define CLBR_RSI  (1 << 4)
 #define CLBR_R8   (1 << 5)
 #define CLBR_R9   (1 << 6)
 #define CLBR_R10  (1 << 7)
 #define CLBR_R11  (1 << 8)
+
 #define CLBR_ANY  ((1 << 9) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
+			 CLBR_RCX | CLBR_R8 | CLBR_R9)
+#define CLBR_RET_REG	(CLBR_RAX)
+#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
+
 #include <asm/desc_defs.h>
-#else
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY  ((1 << 3) - 1)
 #endif /* X86_64 */
 
+#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #include <linux/cpumask.h>
@@ -40,6 +57,14 @@ struct tss_struct;
 struct mm_struct;
 struct desc_struct;
 
+/*
+ * Wrapper type for pointers to code which uses the non-standard
+ * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
+ */
+struct paravirt_callee_save {
+	void *func;
+};
+
 /* general info */
 struct pv_info {
 	unsigned int kernel_rpl;
@@ -189,11 +214,15 @@ struct pv_irq_ops {
 	 * expected to use X86_EFLAGS_IF; all other bits
 	 * returned from save_fl are undefined, and may be ignored by
 	 * restore_fl.
+	 *
+	 * NOTE: These functions callers expect the callee to preserve
+	 * more registers than the standard C calling convention.
 	 */
-	unsigned long (*save_fl)(void);
-	void (*restore_fl)(unsigned long);
-	void (*irq_disable)(void);
-	void (*irq_enable)(void);
+	struct paravirt_callee_save save_fl;
+	struct paravirt_callee_save restore_fl;
+	struct paravirt_callee_save irq_disable;
+	struct paravirt_callee_save irq_enable;
+
 	void (*safe_halt)(void);
 	void (*halt)(void);
 
@@ -279,12 +308,11 @@ struct pv_mmu_ops {
 	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
 					pte_t *ptep, pte_t pte);
 
-	pteval_t (*pte_val)(pte_t);
-	pteval_t (*pte_flags)(pte_t);
-	pte_t (*make_pte)(pteval_t pte);
+	struct paravirt_callee_save pte_val;
+	struct paravirt_callee_save make_pte;
 
-	pgdval_t (*pgd_val)(pgd_t);
-	pgd_t (*make_pgd)(pgdval_t pgd);
+	struct paravirt_callee_save pgd_val;
+	struct paravirt_callee_save make_pgd;
 
 #if PAGETABLE_LEVELS >= 3
 #ifdef CONFIG_X86_PAE
@@ -299,12 +327,12 @@ struct pv_mmu_ops {
 
 	void (*set_pud)(pud_t *pudp, pud_t pudval);
 
-	pmdval_t (*pmd_val)(pmd_t);
-	pmd_t (*make_pmd)(pmdval_t pmd);
+	struct paravirt_callee_save pmd_val;
+	struct paravirt_callee_save make_pmd;
 
 #if PAGETABLE_LEVELS == 4
-	pudval_t (*pud_val)(pud_t);
-	pud_t (*make_pud)(pudval_t pud);
+	struct paravirt_callee_save pud_val;
+	struct paravirt_callee_save make_pud;
 
 	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
 #endif	/* PAGETABLE_LEVELS == 4 */
@@ -389,6 +417,8 @@ extern struct pv_lock_ops pv_lock_ops;
 	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
 
 unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
 unsigned paravirt_patch_ignore(unsigned len);
 unsigned paravirt_patch_call(void *insnbuf,
 			     const void *target, u16 tgt_clobbers,
@@ -480,25 +510,45 @@ int paravirt_disable_iospace(void);
  * makes sure the incoming and outgoing types are always correct.
  */
 #ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS			unsigned long __eax, __edx, __ecx
+#define PVOP_VCALL_ARGS				\
+	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
 #define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+
+#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
+
 #define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
 					"=c" (__ecx)
 #define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+
+#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
+#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
+
 #define EXTRA_CLOBBERS
 #define VEXTRA_CLOBBERS
-#else
-#define PVOP_VCALL_ARGS		unsigned long __edi, __esi, __edx, __ecx
+#else  /* CONFIG_X86_64 */
+#define PVOP_VCALL_ARGS					\
+	unsigned long __edi = __edi, __esi = __esi,	\
+		__edx = __edx, __ecx = __ecx
 #define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+
+#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
+
 #define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
 				"=S" (__esi), "=d" (__edx),		\
 				"=c" (__ecx)
-
 #define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
 
+#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
+
 #define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
 #define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
-#endif
+#endif	/* CONFIG_X86_32 */
 
 #ifdef CONFIG_PARAVIRT_DEBUG
 #define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
@@ -506,10 +556,11 @@ int paravirt_disable_iospace(void);
 #define PVOP_TEST_NULL(op)	((void)op)
 #endif
 
-#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
+		      pre, post, ...)					\
 	({								\
 		rettype __ret;						\
-		PVOP_CALL_ARGS;					\
+		PVOP_CALL_ARGS;						\
 		PVOP_TEST_NULL(op);					\
 		/* This is 32-bit specific, but is okay in 64-bit */	\
 		/* since this condition will never hold */		\
@@ -517,70 +568,113 @@ int paravirt_disable_iospace(void);
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : PVOP_CALL_CLOBBERS		\
+				     : call_clbr			\
 				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
+				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
+				     : "memory", "cc" extra_clbr);	\
 			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
 		} else {						\
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : PVOP_CALL_CLOBBERS		\
+				     : call_clbr			\
 				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
+				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
+				     : "memory", "cc" extra_clbr);	\
 			__ret = (rettype)__eax;				\
 		}							\
 		__ret;							\
 	})
-#define __PVOP_VCALL(op, pre, post, ...)				\
+
+#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
+		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
+
+#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_CALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
 	({								\
 		PVOP_VCALL_ARGS;					\
 		PVOP_TEST_NULL(op);					\
 		asm volatile(pre					\
 			     paravirt_alt(PARAVIRT_CALL)		\
 			     post					\
-			     : PVOP_VCALL_CLOBBERS			\
+			     : call_clbr				\
 			     : paravirt_type(op),			\
-			       paravirt_clobber(CLBR_ANY),		\
+			       paravirt_clobber(clbr),			\
 			       ##__VA_ARGS__				\
-			     : "memory", "cc" VEXTRA_CLOBBERS);		\
+			     : "memory", "cc" extra_clbr);		\
 	})
 
+#define __PVOP_VCALL(op, pre, post, ...)				\
+	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
+		       VEXTRA_CLOBBERS,					\
+		       pre, post, ##__VA_ARGS__)
+
+#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_VCALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+
 #define PVOP_CALL0(rettype, op)						\
 	__PVOP_CALL(rettype, op, "", "")
 #define PVOP_VCALL0(op)							\
 	__PVOP_VCALL(op, "", "")
 
+#define PVOP_CALLEE0(rettype, op)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "")
+#define PVOP_VCALLEE0(op)						\
+	__PVOP_VCALLEESAVE(op, "", "")
+
+
 #define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
 #define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
+
+#define PVOP_CALLEE1(rettype, op, arg1)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALLEE1(op, arg1)						\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
+
 
 #define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)), 	\
-	"1" ((unsigned long)(arg2)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2))
 #define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)), 		\
-	"1" ((unsigned long)(arg2)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2))
+
+#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
+			  PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALLEE2(op, arg1, arg2)					\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
+			   PVOP_CALL_ARG2(arg2))
+
 
 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
 #define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
 
 /* This is the only difference in x86_64. We can make it much simpler */
 #ifdef CONFIG_X86_32
 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
 	__PVOP_CALL(rettype, op,					\
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
 	__PVOP_VCALL(op,						\
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
@@ -588,13 +682,13 @@ int paravirt_disable_iospace(void);
 		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
 #else
 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
+	__PVOP_CALL(rettype, op, "", "",				\
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
+	__PVOP_VCALL(op, "", "",					\
+		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
+		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
 #endif
 
 static inline int paravirt_enabled(void)
@@ -1061,13 +1155,13 @@ static inline pte_t __pte(pteval_t val)
 	pteval_t ret;
 
 	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pteval_t,
+				   pv_mmu_ops.make_pte,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val);
+		ret = PVOP_CALLEE1(pteval_t,
+				   pv_mmu_ops.make_pte,
+				   val);
 
 	return (pte_t) { .pte = ret };
 }
@@ -1077,29 +1171,12 @@ static inline pteval_t pte_val(pte_t pte)
 	pteval_t ret;
 
 	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte, (u64)pte.pte >> 32);
-	else
-		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte);
-
-	return ret;
-}
-
-static inline pteval_t pte_flags(pte_t pte)
-{
-	pteval_t ret;
-
-	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags,
-				 pte.pte, (u64)pte.pte >> 32);
+		ret = PVOP_CALLEE2(pteval_t, pv_mmu_ops.pte_val,
+				   pte.pte, (u64)pte.pte >> 32);
 	else
-		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
-				 pte.pte);
+		ret = PVOP_CALLEE1(pteval_t, pv_mmu_ops.pte_val,
+				   pte.pte);
 
-#ifdef CONFIG_PARAVIRT_DEBUG
-	BUG_ON(ret & PTE_PFN_MASK);
-#endif
 	return ret;
 }
 
@@ -1108,11 +1185,11 @@ static inline pgd_t __pgd(pgdval_t val)
 	pgdval_t ret;
 
 	if (sizeof(pgdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pgdval_t, pv_mmu_ops.make_pgd,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pgdval_t, pv_mmu_ops.make_pgd,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pgdval_t, pv_mmu_ops.make_pgd,
-				 val);
+		ret = PVOP_CALLEE1(pgdval_t, pv_mmu_ops.make_pgd,
+				   val);
 
 	return (pgd_t) { ret };
 }
@@ -1122,11 +1199,11 @@ static inline pgdval_t pgd_val(pgd_t pgd)
 	pgdval_t ret;
 
 	if (sizeof(pgdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd, (u64)pgd.pgd >> 32);
+		ret =  PVOP_CALLEE2(pgdval_t, pv_mmu_ops.pgd_val,
+				    pgd.pgd, (u64)pgd.pgd >> 32);
 	else
-		ret =  PVOP_CALL1(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd);
+		ret =  PVOP_CALLEE1(pgdval_t, pv_mmu_ops.pgd_val,
+				    pgd.pgd);
 
 	return ret;
 }
@@ -1190,11 +1267,11 @@ static inline pmd_t __pmd(pmdval_t val)
 	pmdval_t ret;
 
 	if (sizeof(pmdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pmdval_t, pv_mmu_ops.make_pmd,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pmdval_t, pv_mmu_ops.make_pmd,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pmdval_t, pv_mmu_ops.make_pmd,
-				 val);
+		ret = PVOP_CALLEE1(pmdval_t, pv_mmu_ops.make_pmd,
+				   val);
 
 	return (pmd_t) { ret };
 }
@@ -1204,11 +1281,11 @@ static inline pmdval_t pmd_val(pmd_t pmd)
 	pmdval_t ret;
 
 	if (sizeof(pmdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd, (u64)pmd.pmd >> 32);
+		ret =  PVOP_CALLEE2(pmdval_t, pv_mmu_ops.pmd_val,
+				    pmd.pmd, (u64)pmd.pmd >> 32);
 	else
-		ret =  PVOP_CALL1(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd);
+		ret =  PVOP_CALLEE1(pmdval_t, pv_mmu_ops.pmd_val,
+				    pmd.pmd);
 
 	return ret;
 }
@@ -1230,11 +1307,11 @@ static inline pud_t __pud(pudval_t val)
 	pudval_t ret;
 
 	if (sizeof(pudval_t) > sizeof(long))
-		ret = PVOP_CALL2(pudval_t, pv_mmu_ops.make_pud,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pudval_t, pv_mmu_ops.make_pud,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pudval_t, pv_mmu_ops.make_pud,
-				 val);
+		ret = PVOP_CALLEE1(pudval_t, pv_mmu_ops.make_pud,
+				   val);
 
 	return (pud_t) { ret };
 }
@@ -1244,11 +1321,11 @@ static inline pudval_t pud_val(pud_t pud)
 	pudval_t ret;
 
 	if (sizeof(pudval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud, (u64)pud.pud >> 32);
+		ret =  PVOP_CALLEE2(pudval_t, pv_mmu_ops.pud_val,
+				    pud.pud, (u64)pud.pud >> 32);
 	else
-		ret =  PVOP_CALL1(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud);
+		ret =  PVOP_CALLEE1(pudval_t, pv_mmu_ops.pud_val,
+				    pud.pud);
 
 	return ret;
 }
@@ -1354,14 +1431,7 @@ static inline void arch_leave_lazy_cpu_mode(void)
 	PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
 }
 
-static inline void arch_flush_lazy_cpu_mode(void)
-{
-	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
-		arch_leave_lazy_cpu_mode();
-		arch_enter_lazy_cpu_mode();
-	}
-}
-
+void arch_flush_lazy_cpu_mode(void);
 
 #define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
 static inline void arch_enter_lazy_mmu_mode(void)
@@ -1374,13 +1444,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
 	PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
 }
 
-static inline void arch_flush_lazy_mmu_mode(void)
-{
-	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
-		arch_leave_lazy_mmu_mode();
-		arch_enter_lazy_mmu_mode();
-	}
-}
+void arch_flush_lazy_mmu_mode(void);
 
 static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 				unsigned long phys, pgprot_t flags)
@@ -1389,9 +1453,10 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 }
 
 void _paravirt_nop(void);
-#define paravirt_nop	((void *)_paravirt_nop)
+u32 _paravirt_ident_32(u32);
+u64 _paravirt_ident_64(u64);
 
-void paravirt_use_bytelocks(void);
+#define paravirt_nop	((void *)_paravirt_nop)
 
 #ifdef CONFIG_SMP
 
@@ -1441,12 +1506,37 @@ extern struct paravirt_patch_site __parainstructions[],
 	__parainstructions_end[];
 
 #ifdef CONFIG_X86_32
-#define PV_SAVE_REGS "pushl %%ecx; pushl %%edx;"
-#define PV_RESTORE_REGS "popl %%edx; popl %%ecx"
+#define PV_SAVE_REGS "pushl %ecx; pushl %edx;"
+#define PV_RESTORE_REGS "popl %edx; popl %ecx;"
+
+/* save and restore all caller-save registers, except return value */
+#define PV_SAVE_ALL_CALLER_REGS		"pushl %ecx;"
+#define PV_RESTORE_ALL_CALLER_REGS	"popl  %ecx;"
+
 #define PV_FLAGS_ARG "0"
 #define PV_EXTRA_CLOBBERS
 #define PV_VEXTRA_CLOBBERS
 #else
+/* save and restore all caller-save registers, except return value */
+#define PV_SAVE_ALL_CALLER_REGS						\
+	"push %rcx;"							\
+	"push %rdx;"							\
+	"push %rsi;"							\
+	"push %rdi;"							\
+	"push %r8;"							\
+	"push %r9;"							\
+	"push %r10;"							\
+	"push %r11;"
+#define PV_RESTORE_ALL_CALLER_REGS					\
+	"pop %r11;"							\
+	"pop %r10;"							\
+	"pop %r9;"							\
+	"pop %r8;"							\
+	"pop %rdi;"							\
+	"pop %rsi;"							\
+	"pop %rdx;"							\
+	"pop %rcx;"
+
 /* We save some registers, but all of them, that's too much. We clobber all
  * caller saved registers but the argument parameter */
 #define PV_SAVE_REGS "pushq %%rdi;"
@@ -1456,52 +1546,76 @@ extern struct paravirt_patch_site __parainstructions[],
 #define PV_FLAGS_ARG "D"
 #endif
 
+/*
+ * Generate a thunk around a function which saves all caller-save
+ * registers except for the return value.  This allows C functions to
+ * be called from assembler code where fewer than normal registers are
+ * available.  It may also help code generation around calls from C
+ * code if the common case doesn't use many registers.
+ *
+ * When a callee is wrapped in a thunk, the caller can assume that all
+ * arg regs and all scratch registers are preserved across the
+ * call. The return value in rax/eax will not be saved, even for void
+ * functions.
+ */
+#define PV_CALLEE_SAVE_REGS_THUNK(func)					\
+	extern typeof(func) __raw_callee_save_##func;			\
+	static void *__##func##__ __used = func;			\
+									\
+	asm(".pushsection .text;"					\
+	    "__raw_callee_save_" #func ": "				\
+	    PV_SAVE_ALL_CALLER_REGS					\
+	    "call " #func ";"						\
+	    PV_RESTORE_ALL_CALLER_REGS					\
+	    "ret;"							\
+	    ".popsection")
+
+/* Get a reference to a callee-save function */
+#define PV_CALLEE_SAVE(func)						\
+	((struct paravirt_callee_save) { __raw_callee_save_##func })
+
+/* Promise that "func" already uses the right calling convention */
+#define __PV_IS_CALLEE_SAVE(func)			\
+	((struct paravirt_callee_save) { func })
+
 static inline unsigned long __raw_local_save_flags(void)
 {
 	unsigned long f;
 
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     : "=a"(f)
 		     : paravirt_type(pv_irq_ops.save_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_VEXTRA_CLOBBERS);
+		     : "memory", "cc");
 	return f;
 }
 
 static inline void raw_local_irq_restore(unsigned long f)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     : "=a"(f)
 		     : PV_FLAGS_ARG(f),
 		       paravirt_type(pv_irq_ops.restore_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "cc");
 }
 
 static inline void raw_local_irq_disable(void)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_disable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "eax", "cc");
 }
 
 static inline void raw_local_irq_enable(void)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_enable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "eax", "cc");
 }
 
 static inline unsigned long __raw_local_irq_save(void)
@@ -1544,33 +1658,49 @@ static inline unsigned long __raw_local_irq_save(void)
 	.popsection
 
 
+#define COND_PUSH(set, mask, reg)			\
+	.if ((~(set)) & mask); push %reg; .endif
+#define COND_POP(set, mask, reg)			\
+	.if ((~(set)) & mask); pop %reg; .endif
+
 #ifdef CONFIG_X86_64
-#define PV_SAVE_REGS				\
-	push %rax;				\
-	push %rcx;				\
-	push %rdx;				\
-	push %rsi;				\
-	push %rdi;				\
-	push %r8;				\
-	push %r9;				\
-	push %r10;				\
-	push %r11
-#define PV_RESTORE_REGS				\
-	pop %r11;				\
-	pop %r10;				\
-	pop %r9;				\
-	pop %r8;				\
-	pop %rdi;				\
-	pop %rsi;				\
-	pop %rdx;				\
-	pop %rcx;				\
-	pop %rax
+
+#define PV_SAVE_REGS(set)			\
+	COND_PUSH(set, CLBR_RAX, rax);		\
+	COND_PUSH(set, CLBR_RCX, rcx);		\
+	COND_PUSH(set, CLBR_RDX, rdx);		\
+	COND_PUSH(set, CLBR_RSI, rsi);		\
+	COND_PUSH(set, CLBR_RDI, rdi);		\
+	COND_PUSH(set, CLBR_R8, r8);		\
+	COND_PUSH(set, CLBR_R9, r9);		\
+	COND_PUSH(set, CLBR_R10, r10);		\
+	COND_PUSH(set, CLBR_R11, r11)
+#define PV_RESTORE_REGS(set)			\
+	COND_POP(set, CLBR_R11, r11);		\
+	COND_POP(set, CLBR_R10, r10);		\
+	COND_POP(set, CLBR_R9, r9);		\
+	COND_POP(set, CLBR_R8, r8);		\
+	COND_POP(set, CLBR_RDI, rdi);		\
+	COND_POP(set, CLBR_RSI, rsi);		\
+	COND_POP(set, CLBR_RDX, rdx);		\
+	COND_POP(set, CLBR_RCX, rcx);		\
+	COND_POP(set, CLBR_RAX, rax)
+
 #define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
 #define PARA_INDIRECT(addr)	*addr(%rip)
 #else
-#define PV_SAVE_REGS   pushl %eax; pushl %edi; pushl %ecx; pushl %edx
-#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
+#define PV_SAVE_REGS(set)			\
+	COND_PUSH(set, CLBR_EAX, eax);		\
+	COND_PUSH(set, CLBR_EDI, edi);		\
+	COND_PUSH(set, CLBR_ECX, ecx);		\
+	COND_PUSH(set, CLBR_EDX, edx)
+#define PV_RESTORE_REGS(set)			\
+	COND_POP(set, CLBR_EDX, edx);		\
+	COND_POP(set, CLBR_ECX, ecx);		\
+	COND_POP(set, CLBR_EDI, edi);		\
+	COND_POP(set, CLBR_EAX, eax)
+
 #define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 4)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
 #define PARA_INDIRECT(addr)	*%cs:addr
@@ -1582,15 +1712,15 @@ static inline unsigned long __raw_local_irq_save(void)
 
 #define DISABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
-		  PV_SAVE_REGS;						\
+		  PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE);		\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
-		  PV_RESTORE_REGS;)			\
+		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
 
 #define ENABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
-		  PV_SAVE_REGS;						\
+		  PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE);		\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
-		  PV_RESTORE_REGS;)
+		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
 
 #define USERGS_SYSRET32							\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
@@ -1620,11 +1750,15 @@ static inline unsigned long __raw_local_irq_save(void)
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
 		  swapgs)
 
+/*
+ * Note: swapgs is very special, and in practise is either going to be
+ * implemented with a single "swapgs" instruction or something very
+ * special.  Either way, we don't need to save any registers for
+ * it.
+ */
 #define SWAPGS								\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
-		  PV_SAVE_REGS;						\
-		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs);		\
-		  PV_RESTORE_REGS					\
+		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs)		\
 		 )
 
 #define GET_CR2_INTO_RCX				\

arch/x86/include/asm/pat.h

@@ -5,10 +5,8 @@
 
 #ifdef CONFIG_X86_PAT
 extern int pat_enabled;
-extern void validate_pat_support(struct cpuinfo_x86 *c);
 #else
 static const int pat_enabled;
-static inline void validate_pat_support(struct cpuinfo_x86 *c) { }
 #endif
 
 extern void pat_init(void);
@@ -17,6 +15,4 @@ extern int reserve_memtype(u64 start, u64 end,
 		unsigned long req_type, unsigned long *ret_type);
 extern int free_memtype(u64 start, u64 end);
 
-extern void pat_disable(char *reason);
-
 #endif /* _ASM_X86_PAT_H */

arch/x86/include/asm/percpu.h

@@ -34,6 +34,12 @@
 #define PER_CPU_VAR(var)	per_cpu__##var
 #endif	/* SMP */
 
+#ifdef CONFIG_X86_64_SMP
+#define INIT_PER_CPU_VAR(var)  init_per_cpu__##var
+#else
+#define INIT_PER_CPU_VAR(var)  per_cpu__##var
+#endif
+
 #else /* ...!ASSEMBLY */
 
 #include <linux/stringify.h>
@@ -45,6 +51,22 @@
 #define __percpu_arg(x)		"%" #x
 #endif
 
+/*
+ * Initialized pointers to per-cpu variables needed for the boot
+ * processor need to use these macros to get the proper address
+ * offset from __per_cpu_load on SMP.
+ *
+ * There also must be an entry in vmlinux_64.lds.S
+ */
+#define DECLARE_INIT_PER_CPU(var) \
+       extern typeof(per_cpu_var(var)) init_per_cpu_var(var)
+
+#ifdef CONFIG_X86_64_SMP
+#define init_per_cpu_var(var)  init_per_cpu__##var
+#else
+#define init_per_cpu_var(var)  per_cpu_var(var)
+#endif
+
 /* For arch-specific code, we can use direct single-insn ops (they
  * don't give an lvalue though). */
 extern void __bad_percpu_size(void);

arch/x86/include/asm/pgtable-2level.h

@@ -53,8 +53,6 @@ static inline pte_t native_ptep_get_and_clear(pte_t *xp)
 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
 #endif
 
-#define pte_none(x)		(!(x).pte_low)
-
 /*
  * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
  * split up the 29 bits of offset into this range:

arch/x86/include/asm/pgtable-3level.h

@@ -18,21 +18,6 @@
 	printk("%s:%d: bad pgd %p(%016Lx).\n",				\
 	       __FILE__, __LINE__, &(e), pgd_val(e))
 
-static inline int pud_none(pud_t pud)
-{
-	return pud_val(pud) == 0;
-}
-
-static inline int pud_bad(pud_t pud)
-{
-	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
-}
-
-static inline int pud_present(pud_t pud)
-{
-	return pud_val(pud) & _PAGE_PRESENT;
-}
-
 /* Rules for using set_pte: the pte being assigned *must* be
  * either not present or in a state where the hardware will
  * not attempt to update the pte.  In places where this is
@@ -120,15 +105,6 @@ static inline void pud_clear(pud_t *pudp)
 		write_cr3(pgd);
 }
 
-#define pud_page(pud) pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
-
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *)pud_page_vaddr(*(pud)) +	\
-				  pmd_index(address))
-
 #ifdef CONFIG_SMP
 static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
 {
@@ -145,17 +121,6 @@ static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
 #endif
 
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t a, pte_t b)
-{
-	return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
-}
-
-static inline int pte_none(pte_t pte)
-{
-	return !pte.pte_low && !pte.pte_high;
-}
-
 /*
  * Bits 0, 6 and 7 are taken in the low part of the pte,
  * put the 32 bits of offset into the high part.

arch/x86/include/asm/pgtable.h

@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_PGTABLE_H
 #define _ASM_X86_PGTABLE_H
 
+#include <asm/page.h>
+
 #define FIRST_USER_ADDRESS	0
 
 #define _PAGE_BIT_PRESENT	0	/* is present */
@@ -236,68 +238,82 @@ static inline unsigned long pte_pfn(pte_t pte)
 
 static inline int pmd_large(pmd_t pte)
 {
-	return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+	return (pmd_flags(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
 		(_PAGE_PSE | _PAGE_PRESENT);
 }
 
+static inline pte_t pte_set_flags(pte_t pte, pteval_t set)
+{
+	pteval_t v = native_pte_val(pte);
+
+	return native_make_pte(v | set);
+}
+
+static inline pte_t pte_clear_flags(pte_t pte, pteval_t clear)
+{
+	pteval_t v = native_pte_val(pte);
+
+	return native_make_pte(v & ~clear);
+}
+
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+	return pte_clear_flags(pte, _PAGE_DIRTY);
 }
 
 static inline pte_t pte_mkold(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+	return pte_clear_flags(pte, _PAGE_ACCESSED);
 }
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_RW);
+	return pte_clear_flags(pte, _PAGE_RW);
 }
 
 static inline pte_t pte_mkexec(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_NX);
+	return pte_clear_flags(pte, _PAGE_NX);
 }
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_DIRTY);
+	return pte_set_flags(pte, _PAGE_DIRTY);
 }
 
 static inline pte_t pte_mkyoung(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+	return pte_set_flags(pte, _PAGE_ACCESSED);
 }
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_RW);
+	return pte_set_flags(pte, _PAGE_RW);
 }
 
 static inline pte_t pte_mkhuge(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_PSE);
+	return pte_set_flags(pte, _PAGE_PSE);
 }
 
 static inline pte_t pte_clrhuge(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_PSE);
+	return pte_clear_flags(pte, _PAGE_PSE);
 }
 
 static inline pte_t pte_mkglobal(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_GLOBAL);
+	return pte_set_flags(pte, _PAGE_GLOBAL);
 }
 
 static inline pte_t pte_clrglobal(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_GLOBAL);
+	return pte_clear_flags(pte, _PAGE_GLOBAL);
 }
 
 static inline pte_t pte_mkspecial(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+	return pte_set_flags(pte, _PAGE_SPECIAL);
 }
 
 extern pteval_t __supported_pte_mask;
@@ -451,6 +467,190 @@ static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
 # include "pgtable_64.h"
 #endif
 
+#ifndef __ASSEMBLY__
+#include <linux/mm_types.h>
+
+static inline int pte_none(pte_t pte)
+{
+	return !pte.pte;
+}
+
+#define __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t a, pte_t b)
+{
+	return a.pte == b.pte;
+}
+
+static inline int pte_present(pte_t a)
+{
+	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
+}
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_flags(pmd) & _PAGE_PRESENT;
+}
+
+static inline int pmd_none(pmd_t pmd)
+{
+	/* Only check low word on 32-bit platforms, since it might be
+	   out of sync with upper half. */
+	return (unsigned long)native_pmd_val(pmd) == 0;
+}
+
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+	return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
+}
+
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pmd_page(pmd)	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+static inline unsigned pmd_index(unsigned long address)
+{
+	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * (Currently stuck as a macro because of indirect forward reference
+ * to linux/mm.h:page_to_nid())
+ */
+#define mk_pte(page, pgprot)   pfn_pte(page_to_pfn(page), (pgprot))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this function returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+static inline unsigned pte_index(unsigned long address)
+{
+	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
+}
+
+static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
+{
+	return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
+}
+
+static inline int pmd_bad(pmd_t pmd)
+{
+	return (pmd_flags(pmd) & ~_PAGE_USER) != _KERNPG_TABLE;
+}
+
+static inline unsigned long pages_to_mb(unsigned long npg)
+{
+	return npg >> (20 - PAGE_SHIFT);
+}
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#if PAGETABLE_LEVELS == 2
+static inline int pud_large(pud_t pud)
+{
+	return 0;
+}
+#endif
+
+#if PAGETABLE_LEVELS > 2
+static inline int pud_none(pud_t pud)
+{
+	return native_pud_val(pud) == 0;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	return pud_flags(pud) & _PAGE_PRESENT;
+}
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+	return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
+}
+
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pud_page(pud)		pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
+static inline int pud_large(pud_t pud)
+{
+	return (pud_flags(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+		(_PAGE_PSE | _PAGE_PRESENT);
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return (pud_flags(pud) & ~(_KERNPG_TABLE | _PAGE_USER)) != 0;
+}
+#endif	/* PAGETABLE_LEVELS > 2 */
+
+#if PAGETABLE_LEVELS > 3
+static inline int pgd_present(pgd_t pgd)
+{
+	return pgd_flags(pgd) & _PAGE_PRESENT;
+}
+
+static inline unsigned long pgd_page_vaddr(pgd_t pgd)
+{
+	return (unsigned long)__va((unsigned long)pgd_val(pgd) & PTE_PFN_MASK);
+}
+
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pgd_page(pgd)		pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT)
+
+/* to find an entry in a page-table-directory. */
+static inline unsigned pud_index(unsigned long address)
+{
+	return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
+}
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+	return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(address);
+}
+
+static inline int pgd_bad(pgd_t pgd)
+{
+	return (pgd_flags(pgd) & ~_PAGE_USER) != _KERNPG_TABLE;
+}
+
+static inline int pgd_none(pgd_t pgd)
+{
+	return !native_pgd_val(pgd);
+}
+#endif	/* PAGETABLE_LEVELS > 3 */
+
+#endif	/* __ASSEMBLY__ */
+
 /*
  * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
  *

arch/x86/include/asm/pgtable_32.h

@@ -85,55 +85,12 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 /* The boot page tables (all created as a single array) */
 extern unsigned long pg0[];
 
-#define pte_present(x)	((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
-#define pmd_none(x)	(!(unsigned long)pmd_val((x)))
-#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
 #ifdef CONFIG_X86_PAE
 # include <asm/pgtable-3level.h>
 #else
 # include <asm/pgtable-2level.h>
 #endif
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-
-static inline int pud_large(pud_t pud) { return 0; }
-
-/*
- * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
- *
- * this macro returns the index of the entry in the pmd page which would
- * control the given virtual address
- */
-#define pmd_index(address)				\
-	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-
-/*
- * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
- *
- * this macro returns the index of the entry in the pte page which would
- * control the given virtual address
- */
-#define pte_index(address)					\
-	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address)				\
-	((pte_t *)pmd_page_vaddr(*(dir)) +  pte_index((address)))
-
-#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
-#define pmd_page_vaddr(pmd)					\
-	((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
-
 #if defined(CONFIG_HIGHPTE)
 #define pte_offset_map(dir, address)					\
 	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
@@ -176,7 +133,4 @@ do {						\
 #define kern_addr_valid(kaddr)	(0)
 #endif
 
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
 #endif /* _ASM_X86_PGTABLE_32_H */

arch/x86/include/asm/pgtable_64.h

@@ -66,9 +66,6 @@ extern void paging_init(void);
 	printk("%s:%d: bad pgd %p(%016lx).\n",		\
 	       __FILE__, __LINE__, &(e), pgd_val(e))
 
-#define pgd_none(x)	(!pgd_val(x))
-#define pud_none(x)	(!pud_val(x))
-
 struct mm_struct;
 
 void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
@@ -133,8 +130,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 	native_set_pgd(pgd, native_make_pgd(0));
 }
 
-#define pte_same(a, b)		((a).pte == (b).pte)
-
 #endif /* !__ASSEMBLY__ */
 
 #define PMD_SIZE	(_AC(1, UL) << PMD_SHIFT)
@@ -155,26 +150,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 
 #ifndef __ASSEMBLY__
 
-static inline int pgd_bad(pgd_t pgd)
-{
-	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-static inline int pud_bad(pud_t pud)
-{
-	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-static inline int pmd_bad(pmd_t pmd)
-{
-	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-#define pte_none(x)	(!pte_val((x)))
-#define pte_present(x)	(pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
-
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
@@ -183,41 +158,12 @@ static inline int pmd_bad(pmd_t pmd)
 /*
  * Level 4 access.
  */
-#define pgd_page_vaddr(pgd)						\
-	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
-#define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
-#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
 static inline int pgd_large(pgd_t pgd) { return 0; }
 #define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
 
 /* PUD - Level3 access */
-/* to find an entry in a page-table-directory. */
-#define pud_page_vaddr(pud)						\
-	((unsigned long)__va(pud_val((pud)) & PHYSICAL_PAGE_MASK))
-#define pud_page(pud)	(pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
-#define pud_offset(pgd, address)					\
-	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
-#define pud_present(pud) (pud_val((pud)) & _PAGE_PRESENT)
-
-static inline int pud_large(pud_t pte)
-{
-	return (pud_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
-		(_PAGE_PSE | _PAGE_PRESENT);
-}
 
 /* PMD  - Level 2 access */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
-#define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
-#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-#define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
-				  pmd_index(address))
-#define pmd_none(x)	(!pmd_val((x)))
-#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
-#define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
-#define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
-
 #define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
 #define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) |	\
 					    _PAGE_FILE })
@@ -225,13 +171,6 @@ static inline int pud_large(pud_t pte)
 
 /* PTE - Level 1 access. */
 
-/* page, protection -> pte */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn((page)), (pgprot))
-
-#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
-					 pte_index((address)))
-
 /* x86-64 always has all page tables mapped. */
 #define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
 #define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
@@ -265,9 +204,6 @@ extern int direct_gbpages;
 extern int kern_addr_valid(unsigned long addr);
 extern void cleanup_highmap(void);
 
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 

arch/x86/include/asm/prctl.h

@@ -6,8 +6,4 @@
 #define ARCH_GET_FS 0x1003
 #define ARCH_GET_GS 0x1004
 
-#ifdef CONFIG_X86_64
-extern long sys_arch_prctl(int, unsigned long);
-#endif /* CONFIG_X86_64 */
-
 #endif /* _ASM_X86_PRCTL_H */

arch/x86/include/asm/processor.h

@@ -73,7 +73,7 @@ struct cpuinfo_x86 {
 	char			pad0;
 #else
 	/* Number of 4K pages in DTLB/ITLB combined(in pages): */
-	int			 x86_tlbsize;
+	int			x86_tlbsize;
 	__u8			x86_virt_bits;
 	__u8			x86_phys_bits;
 #endif
@@ -393,16 +393,14 @@ union irq_stack_union {
 };
 
 DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
-DECLARE_PER_CPU(char *, irq_stack_ptr);
+DECLARE_INIT_PER_CPU(irq_stack_union);
 
-static inline void load_gs_base(int cpu)
-{
-	/* Memory clobbers used to order pda/percpu accesses */
-	mb();
-	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
-	mb();
-}
+DECLARE_PER_CPU(char *, irq_stack_ptr);
+#else	/* X86_64 */
+#ifdef CONFIG_CC_STACKPROTECTOR
+DECLARE_PER_CPU(unsigned long, stack_canary);
 #endif
+#endif	/* X86_64 */
 
 extern void print_cpu_info(struct cpuinfo_x86 *);
 extern unsigned int xstate_size;
@@ -776,9 +774,9 @@ extern int sysenter_setup(void);
 extern struct desc_ptr		early_gdt_descr;
 
 extern void cpu_set_gdt(int);
-extern void switch_to_new_gdt(void);
+extern void switch_to_new_gdt(int);
+extern void load_percpu_segment(int);
 extern void cpu_init(void);
-extern void init_gdt(int cpu);
 
 static inline unsigned long get_debugctlmsr(void)
 {

arch/x86/include/asm/proto.h

@@ -18,11 +18,7 @@ extern void syscall32_cpu_init(void);
 
 extern void check_efer(void);
 
-#ifdef CONFIG_X86_BIOS_REBOOT
 extern int reboot_force;
-#else
-static const int reboot_force = 0;
-#endif
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 

arch/x86/include/asm/ptrace.h

@@ -28,7 +28,7 @@ struct pt_regs {
 	int  xds;
 	int  xes;
 	int  xfs;
-	/* int  gs; */
+	int  xgs;
 	long orig_eax;
 	long eip;
 	int  xcs;
@@ -50,7 +50,7 @@ struct pt_regs {
 	unsigned long ds;
 	unsigned long es;
 	unsigned long fs;
-	/* int  gs; */
+	unsigned long gs;
 	unsigned long orig_ax;
 	unsigned long ip;
 	unsigned long cs;

arch/x86/include/asm/segment.h

@@ -61,7 +61,7 @@
  *
  *  26 - ESPFIX small SS
  *  27 - per-cpu			[ offset to per-cpu data area ]
- *  28 - unused
+ *  28 - stack_canary-20		[ for stack protector ]
  *  29 - unused
  *  30 - unused
  *  31 - TSS for double fault handler
@@ -95,6 +95,13 @@
 #define __KERNEL_PERCPU 0
 #endif
 
+#define GDT_ENTRY_STACK_CANARY		(GDT_ENTRY_KERNEL_BASE + 16)
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __KERNEL_STACK_CANARY		(GDT_ENTRY_STACK_CANARY * 8)
+#else
+#define __KERNEL_STACK_CANARY		0
+#endif
+
 #define GDT_ENTRY_DOUBLEFAULT_TSS	31
 
 /*

arch/x86/include/asm/setup.h

@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_SETUP_H
 #define _ASM_X86_SETUP_H
 
+#ifdef __KERNEL__
+
 #define COMMAND_LINE_SIZE 2048
 
 #ifndef __ASSEMBLY__
@@ -8,10 +10,8 @@
 /* Interrupt control for vSMPowered x86_64 systems */
 void vsmp_init(void);
 
-
 void setup_bios_corruption_check(void);
 
-
 #ifdef CONFIG_X86_VISWS
 extern void visws_early_detect(void);
 extern int is_visws_box(void);
@@ -43,7 +43,7 @@ struct x86_quirks {
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
-                                    unsigned short oemsize);
+				unsigned short oemsize);
 	int (*setup_ioapic_ids)(void);
 	int (*update_genapic)(void);
 };
@@ -56,8 +56,6 @@ extern unsigned long saved_video_mode;
 #endif
 #endif /* __ASSEMBLY__ */
 
-#ifdef __KERNEL__
-
 #ifdef __i386__
 
 #include <linux/pfn.h>

arch/x86/include/asm/smp.h

@@ -182,28 +182,9 @@ static inline int logical_smp_processor_id(void)
 	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
 }
 
-#include <mach_apicdef.h>
-static inline unsigned int read_apic_id(void)
-{
-	unsigned int reg;
-
-	reg = *(u32 *)(APIC_BASE + APIC_ID);
-
-	return GET_APIC_ID(reg);
-}
 #endif
 
-
-# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
 extern int hard_smp_processor_id(void);
-# else
-#include <mach_apicdef.h>
-static inline int hard_smp_processor_id(void)
-{
-	/* we don't want to mark this access volatile - bad code generation */
-	return read_apic_id();
-}
-# endif /* APIC_DEFINITION */
 
 #else /* CONFIG_X86_LOCAL_APIC */
 

arch/x86/include/asm/mach-default/smpboot_hooks.h → arch/x86/include/asm/smpboot_hooks.h

@@ -13,10 +13,10 @@ static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
 	CMOS_WRITE(0xa, 0xf);
 	local_flush_tlb();
 	pr_debug("1.\n");
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
+	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_high)) =
 								 start_eip >> 4;
 	pr_debug("2.\n");
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
+	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_low)) =
 							 start_eip & 0xf;
 	pr_debug("3.\n");
 }
@@ -34,7 +34,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
 	 */
 	CMOS_WRITE(0, 0xf);
 
-	*((volatile long *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
+	*((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0;
 }
 
 static inline void __init smpboot_setup_io_apic(void)

arch/x86/include/asm/spinlock.h

@@ -172,70 +172,8 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
 }
 
-#ifdef CONFIG_PARAVIRT
-/*
- * Define virtualization-friendly old-style lock byte lock, for use in
- * pv_lock_ops if desired.
- *
- * This differs from the pre-2.6.24 spinlock by always using xchgb
- * rather than decb to take the lock; this allows it to use a
- * zero-initialized lock structure.  It also maintains a 1-byte
- * contention counter, so that we can implement
- * __byte_spin_is_contended.
- */
-struct __byte_spinlock {
-	s8 lock;
-	s8 spinners;
-};
-
-static inline int __byte_spin_is_locked(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	return bl->lock != 0;
-}
-
-static inline int __byte_spin_is_contended(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	return bl->spinners != 0;
-}
-
-static inline void __byte_spin_lock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	s8 val = 1;
-
-	asm("1: xchgb %1, %0\n"
-	    "   test %1,%1\n"
-	    "   jz 3f\n"
-	    "   " LOCK_PREFIX "incb %2\n"
-	    "2: rep;nop\n"
-	    "   cmpb $1, %0\n"
-	    "   je 2b\n"
-	    "   " LOCK_PREFIX "decb %2\n"
-	    "   jmp 1b\n"
-	    "3:"
-	    : "+m" (bl->lock), "+q" (val), "+m" (bl->spinners): : "memory");
-}
-
-static inline int __byte_spin_trylock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	u8 old = 1;
-
-	asm("xchgb %1,%0"
-	    : "+m" (bl->lock), "+q" (old) : : "memory");
+#ifndef CONFIG_PARAVIRT
 
-	return old == 0;
-}
-
-static inline void __byte_spin_unlock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	smp_wmb();
-	bl->lock = 0;
-}
-#else  /* !CONFIG_PARAVIRT */
 static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
 {
 	return __ticket_spin_is_locked(lock);
@@ -268,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
 	__raw_spin_lock(lock);
 }
 
-#endif	/* CONFIG_PARAVIRT */
+#endif
 
 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
 {
@@ -330,8 +268,7 @@ static inline int __raw_read_trylock(raw_rwlock_t *lock)
 {
 	atomic_t *count = (atomic_t *)lock;
 
-	atomic_dec(count);
-	if (atomic_read(count) >= 0)
+	if (atomic_dec_return(count) >= 0)
 		return 1;
 	atomic_inc(count);
 	return 0;

arch/x86/include/asm/stackprotector.h

@@ -1,8 +1,54 @@
+/*
+ * GCC stack protector support.
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function.  The pattern is called stack canary
+ * and unfortunately gcc requires it to be at a fixed offset from %gs.
+ * On x86_64, the offset is 40 bytes and on x86_32 20 bytes.  x86_64
+ * and x86_32 use segment registers differently and thus handles this
+ * requirement differently.
+ *
+ * On x86_64, %gs is shared by percpu area and stack canary.  All
+ * percpu symbols are zero based and %gs points to the base of percpu
+ * area.  The first occupant of the percpu area is always
+ * irq_stack_union which contains stack_canary at offset 40.  Userland
+ * %gs is always saved and restored on kernel entry and exit using
+ * swapgs, so stack protector doesn't add any complexity there.
+ *
+ * On x86_32, it's slightly more complicated.  As in x86_64, %gs is
+ * used for userland TLS.  Unfortunately, some processors are much
+ * slower at loading segment registers with different value when
+ * entering and leaving the kernel, so the kernel uses %fs for percpu
+ * area and manages %gs lazily so that %gs is switched only when
+ * necessary, usually during task switch.
+ *
+ * As gcc requires the stack canary at %gs:20, %gs can't be managed
+ * lazily if stack protector is enabled, so the kernel saves and
+ * restores userland %gs on kernel entry and exit.  This behavior is
+ * controlled by CONFIG_X86_32_LAZY_GS and accessors are defined in
+ * system.h to hide the details.
+ */
+
 #ifndef _ASM_STACKPROTECTOR_H
 #define _ASM_STACKPROTECTOR_H 1
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+
 #include <asm/tsc.h>
 #include <asm/processor.h>
+#include <asm/percpu.h>
+#include <asm/system.h>
+#include <asm/desc.h>
+#include <linux/random.h>
+
+/*
+ * 24 byte read-only segment initializer for stack canary.  Linker
+ * can't handle the address bit shifting.  Address will be set in
+ * head_32 for boot CPU and setup_per_cpu_areas() for others.
+ */
+#define GDT_STACK_CANARY_INIT						\
+	[GDT_ENTRY_STACK_CANARY] = { { { 0x00000018, 0x00409000 } } },
 
 /*
  * Initialize the stackprotector canary value.
@@ -15,12 +61,9 @@ static __always_inline void boot_init_stack_canary(void)
 	u64 canary;
 	u64 tsc;
 
-	/*
-	 * Build time only check to make sure the stack_canary is at
-	 * offset 40 in the pda; this is a gcc ABI requirement
-	 */
+#ifdef CONFIG_X86_64
 	BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40);
-
+#endif
 	/*
 	 * We both use the random pool and the current TSC as a source
 	 * of randomness. The TSC only matters for very early init,
@@ -32,7 +75,50 @@ static __always_inline void boot_init_stack_canary(void)
 	canary += tsc + (tsc << 32UL);
 
 	current->stack_canary = canary;
+#ifdef CONFIG_X86_64
 	percpu_write(irq_stack_union.stack_canary, canary);
+#else
+	percpu_write(stack_canary, canary);
+#endif
 }
 
+static inline void setup_stack_canary_segment(int cpu)
+{
+#ifdef CONFIG_X86_32
+	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu) - 20;
+	struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
+	struct desc_struct desc;
+
+	desc = gdt_table[GDT_ENTRY_STACK_CANARY];
+	desc.base0 = canary & 0xffff;
+	desc.base1 = (canary >> 16) & 0xff;
+	desc.base2 = (canary >> 24) & 0xff;
+	write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
+#endif
+}
+
+static inline void load_stack_canary_segment(void)
+{
+#ifdef CONFIG_X86_32
+	asm("mov %0, %%gs" : : "r" (__KERNEL_STACK_CANARY) : "memory");
+#endif
+}
+
+#else	/* CC_STACKPROTECTOR */
+
+#define GDT_STACK_CANARY_INIT
+
+/* dummy boot_init_stack_canary() is defined in linux/stackprotector.h */
+
+static inline void setup_stack_canary_segment(int cpu)
+{ }
+
+static inline void load_stack_canary_segment(void)
+{
+#ifdef CONFIG_X86_32
+	asm volatile ("mov %0, %%gs" : : "r" (0));
 #endif
+}
+
+#endif	/* CC_STACKPROTECTOR */
+#endif	/* _ASM_STACKPROTECTOR_H */

arch/x86/include/asm/summit/apic.h

@@ -1,202 +0,0 @@
-#ifndef __ASM_SUMMIT_APIC_H
-#define __ASM_SUMMIT_APIC_H
-
-#include <asm/smp.h>
-#include <linux/gfp.h>
-
-#define esr_disable (1)
-#define NO_BALANCE_IRQ (0)
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT	4
-#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
-#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline const cpumask_t *target_cpus(void)
-{
-	/* CPU_MASK_ALL (0xff) has undefined behaviour with
-	 * dest_LowestPrio mode logical clustered apic interrupt routing
-	 * Just start on cpu 0.  IRQ balancing will spread load
-	 */
-	return &cpumask_of_cpu(0);
-}
-
-#define INT_DELIVERY_MODE (dest_LowestPrio)
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long check_apicid_present(int bit)
-{
-	return 1;
-}
-
-#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-
-extern u8 cpu_2_logical_apicid[];
-
-static inline void init_apic_ldr(void)
-{
-	unsigned long val, id;
-	int count = 0;
-	u8 my_id = (u8)hard_smp_processor_id();
-	u8 my_cluster = (u8)apicid_cluster(my_id);
-#ifdef CONFIG_SMP
-	u8 lid;
-	int i;
-
-	/* Create logical APIC IDs by counting CPUs already in cluster. */
-	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
-		lid = cpu_2_logical_apicid[i];
-		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
-			++count;
-	}
-#endif
-	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
-	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
-	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
-	id = my_cluster | (1UL << count);
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
-static inline int apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
-						nr_ioapics);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0x0F);
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int apicid)
-{
-	return physid_mask_of_physid(0);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int num_bits_set;
-	int cpus_found = 0;
-	int cpu;
-	int apicid;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set >= nr_cpu_ids)
-		return (int) 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of TARGET_CPUS.
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)){
-				printk ("%s: Not a valid mask!\n", __func__);
-				return 0xFF;
-			}
-			apicid = apicid | new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
-						  const struct cpumask *andmask)
-{
-	int apicid = cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-	return apicid;
-}
-
-/* cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value.  For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-#endif /* __ASM_SUMMIT_APIC_H */

arch/x86/include/asm/summit/apicdef.h

@@ -1,13 +0,0 @@
-#ifndef __ASM_SUMMIT_APICDEF_H
-#define __ASM_SUMMIT_APICDEF_H
-
-#define		APIC_ID_MASK		(0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
-	return (x>>24)&0xFF;
-}
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
-#endif

arch/x86/include/asm/summit/ipi.h

@@ -1,26 +0,0 @@
-#ifndef __ASM_SUMMIT_IPI_H
-#define __ASM_SUMMIT_IPI_H
-
-void send_IPI_mask_sequence(const cpumask_t *mask, int vector);
-void send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
-
-static inline void send_IPI_mask(const cpumask_t *mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-
-	if (!cpus_empty(mask))
-		send_IPI_mask(&mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
-	send_IPI_mask(&cpu_online_map, vector);
-}
-
-#endif /* __ASM_SUMMIT_IPI_H */

arch/x86/include/asm/summit/mpparse.h

@@ -1,109 +0,0 @@
-#ifndef __ASM_SUMMIT_MPPARSE_H
-#define __ASM_SUMMIT_MPPARSE_H
-
-#include <asm/tsc.h>
-
-extern int use_cyclone;
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-extern void setup_summit(void);
-#else
-#define setup_summit()	{}
-#endif
-
-static inline int mps_oem_check(struct mpc_table *mpc, char *oem,
-		char *productid)
-{
-	if (!strncmp(oem, "IBM ENSW", 8) &&
-			(!strncmp(productid, "VIGIL SMP", 9)
-			 || !strncmp(productid, "EXA", 3)
-			 || !strncmp(productid, "RUTHLESS SMP", 12))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (!strncmp(oem_id, "IBM", 3) &&
-	    (!strncmp(oem_table_id, "SERVIGIL", 8)
-	     || !strncmp(oem_table_id, "EXA", 3))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-struct rio_table_hdr {
-	unsigned char version;      /* Version number of this data structure           */
-	                            /* Version 3 adds chassis_num & WP_index           */
-	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
-	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
-} __attribute__((packed));
-
-struct scal_detail {
-	unsigned char node_id;      /* Scalability Node ID                             */
-	unsigned long CBAR;         /* Address of 1MB register space                   */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
-} __attribute__((packed));
-
-struct rio_detail {
-	unsigned char node_id;      /* RIO Node ID                                     */
-	unsigned long BBAR;         /* Address of 1MB register space                   */
-	unsigned char type;         /* Type of device                                  */
-	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
-	                            /* For CYC:  Node ID of Twister that owns this CYC */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
-	                            /* For CYC:  0                                     */
-	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
-	                            /*                 = 0 : the XAPIC is not used, ie:*/
-	                            /*                     ints fwded to another XAPIC */
-	                            /*           Bits1:7 Reserved                      */
-	                            /* For CYC:  Bits0:7 Reserved                      */
-	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
-	                            /*           lower slot numbers/PCI bus numbers    */
-	                            /* For CYC:  No meaning                            */
-	unsigned char chassis_num;  /* 1 based Chassis number                          */
-	                            /* For LookOut WPEGs this field indicates the      */
-	                            /* Expansion Chassis #, enumerated from Boot       */
-	                            /* Node WPEG external port, then Boot Node CYC     */
-	                            /* external port, then Next Vigil chassis WPEG     */
-	                            /* external port, etc.                             */
-	                            /* Shared Lookouts have only 1 chassis number (the */
-	                            /* first one assigned)                             */
-} __attribute__((packed));
-
-
-typedef enum {
-	CompatTwister = 0,  /* Compatibility Twister               */
-	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
-	CompatCyclone = 2,  /* Compatibility Cyclone               */
-	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
-	CompatWPEG    = 4,  /* Compatibility WPEG                  */
-	AltWPEG       = 5,  /* Second Planar WPEG                  */
-	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
-	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
-} node_type;
-
-static inline int is_WPEG(struct rio_detail *rio){
-	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
-		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
-}
-
-#endif /* __ASM_SUMMIT_MPPARSE_H */

arch/x86/include/asm/syscalls.h

@@ -29,21 +29,21 @@ asmlinkage int sys_get_thread_area(struct user_desc __user *);
 /* X86_32 only */
 #ifdef CONFIG_X86_32
 /* kernel/process_32.c */
-asmlinkage int sys_fork(struct pt_regs);
-asmlinkage int sys_clone(struct pt_regs);
-asmlinkage int sys_vfork(struct pt_regs);
-asmlinkage int sys_execve(struct pt_regs);
+int sys_fork(struct pt_regs *);
+int sys_clone(struct pt_regs *);
+int sys_vfork(struct pt_regs *);
+int sys_execve(struct pt_regs *);
 
 /* kernel/signal_32.c */
 asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
 asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
 			     struct old_sigaction __user *);
-asmlinkage int sys_sigaltstack(unsigned long);
-asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(unsigned long);
+int sys_sigaltstack(struct pt_regs *);
+unsigned long sys_sigreturn(struct pt_regs *);
+long sys_rt_sigreturn(struct pt_regs *);
 
 /* kernel/ioport.c */
-asmlinkage long sys_iopl(unsigned long);
+long sys_iopl(struct pt_regs *);
 
 /* kernel/sys_i386_32.c */
 asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
@@ -59,8 +59,8 @@ struct oldold_utsname;
 asmlinkage int sys_olduname(struct oldold_utsname __user *);
 
 /* kernel/vm86_32.c */
-asmlinkage int sys_vm86old(struct pt_regs);
-asmlinkage int sys_vm86(struct pt_regs);
+int sys_vm86old(struct pt_regs *);
+int sys_vm86(struct pt_regs *);
 
 #else /* CONFIG_X86_32 */
 

arch/x86/include/asm/system.h

@@ -23,6 +23,20 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #ifdef CONFIG_X86_32
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __switch_canary							\
+	"movl %P[task_canary](%[next]), %%ebx\n\t"			\
+	"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
+#define __switch_canary_oparam						\
+	, [stack_canary] "=m" (per_cpu_var(stack_canary))
+#define __switch_canary_iparam						\
+	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
+#else	/* CC_STACKPROTECTOR */
+#define __switch_canary
+#define __switch_canary_oparam
+#define __switch_canary_iparam
+#endif	/* CC_STACKPROTECTOR */
+
 /*
  * Saving eflags is important. It switches not only IOPL between tasks,
  * it also protects other tasks from NT leaking through sysenter etc.
@@ -44,6 +58,7 @@ do {									\
 		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
 		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
 		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
+		     __switch_canary					\
 		     "jmp __switch_to\n"	/* regparm call  */	\
 		     "1:\t"						\
 		     "popl %%ebp\n\t"		/* restore EBP   */	\
@@ -58,6 +73,8 @@ do {									\
 		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
 		       "=S" (esi), "=D" (edi)				\
 		       							\
+		       __switch_canary_oparam				\
+									\
 		       /* input parameters: */				\
 		     : [next_sp]  "m" (next->thread.sp),		\
 		       [next_ip]  "m" (next->thread.ip),		\
@@ -66,6 +83,8 @@ do {									\
 		       [prev]     "a" (prev),				\
 		       [next]     "d" (next)				\
 									\
+		       __switch_canary_iparam				\
+									\
 		     : /* reloaded segment registers */			\
 			"memory");					\
 } while (0)
@@ -111,16 +130,16 @@ do {									\
 	     "movq "__percpu_arg([current_task])",%%rsi\n\t"		  \
 	     __switch_canary						  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
-	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
 	     "movq %%rax,%%rdi\n\t" 					  \
-	     "jc   ret_from_fork\n\t"					  \
+	     "testl  %[_tif_fork],%P[ti_flags](%%r8)\n\t"	  \
+	     "jnz   ret_from_fork\n\t"					  \
 	     RESTORE_CONTEXT						  \
 	     : "=a" (last)					  	  \
 	       __switch_canary_oparam					  \
 	     : [next] "S" (next), [prev] "D" (prev),			  \
 	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
 	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
-	       [tif_fork] "i" (TIF_FORK),			  	  \
+	       [_tif_fork] "i" (_TIF_FORK),			  	  \
 	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
 	       [current_task] "m" (per_cpu_var(current_task))		  \
 	       __switch_canary_iparam					  \
@@ -182,6 +201,25 @@ extern void native_load_gs_index(unsigned);
 #define savesegment(seg, value)				\
 	asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
 
+/*
+ * x86_32 user gs accessors.
+ */
+#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_32_LAZY_GS
+#define get_user_gs(regs)	(u16)({unsigned long v; savesegment(gs, v); v;})
+#define set_user_gs(regs, v)	loadsegment(gs, (unsigned long)(v))
+#define task_user_gs(tsk)	((tsk)->thread.gs)
+#define lazy_save_gs(v)		savesegment(gs, (v))
+#define lazy_load_gs(v)		loadsegment(gs, (v))
+#else	/* X86_32_LAZY_GS */
+#define get_user_gs(regs)	(u16)((regs)->gs)
+#define set_user_gs(regs, v)	do { (regs)->gs = (v); } while (0)
+#define task_user_gs(tsk)	(task_pt_regs(tsk)->gs)
+#define lazy_save_gs(v)		do { } while (0)
+#define lazy_load_gs(v)		do { } while (0)
+#endif	/* X86_32_LAZY_GS */
+#endif	/* X86_32 */
+
 static inline unsigned long get_limit(unsigned long segment)
 {
 	unsigned long __limit;

arch/x86/include/asm/thread_info.h

@@ -40,6 +40,7 @@ struct thread_info {
 						*/
 	__u8			supervisor_stack[0];
 #endif
+	int			uaccess_err;
 };
 
 #define INIT_THREAD_INFO(tsk)			\

arch/x86/include/asm/topology.h

@@ -74,6 +74,8 @@ static inline const struct cpumask *cpumask_of_node(int node)
 	return &node_to_cpumask_map[node];
 }
 
+static inline void setup_node_to_cpumask_map(void) { }
+
 #else /* CONFIG_X86_64 */
 
 /* Mappings between node number and cpus on that node. */
@@ -120,6 +122,8 @@ static inline cpumask_t node_to_cpumask(int node)
 
 #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
 
+extern void setup_node_to_cpumask_map(void);
+
 /*
  * Replace default node_to_cpumask_ptr with optimized version
  * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
@@ -218,6 +222,8 @@ static inline int node_to_first_cpu(int node)
 	return first_cpu(cpu_online_map);
 }
 
+static inline void setup_node_to_cpumask_map(void) { }
+
 /*
  * Replace default node_to_cpumask_ptr with optimized version
  * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"

arch/x86/include/asm/traps.h

@@ -41,7 +41,7 @@ dotraplinkage void do_int3(struct pt_regs *, long);
 dotraplinkage void do_overflow(struct pt_regs *, long);
 dotraplinkage void do_bounds(struct pt_regs *, long);
 dotraplinkage void do_invalid_op(struct pt_regs *, long);
-dotraplinkage void do_device_not_available(struct pt_regs);
+dotraplinkage void do_device_not_available(struct pt_regs *, long);
 dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
 dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
 dotraplinkage void do_segment_not_present(struct pt_regs *, long);