Merge tag 'fixes-for-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.12-rc4

A fix to a really old synchronization bug on mass storage gadget.

Support for Meson8 SoCs on dwc2

Synchronization fixes on renesas USB driver.

Documentation/acpi/acpi-lid.txt

@@ -59,20 +59,28 @@ button driver uses the following 3 modes in order not to trigger issues.
 If the userspace hasn't been prepared to ignore the unreliable "opened"
 events and the unreliable initial state notification, Linux users can use
 the following kernel parameters to handle the possible issues:
-A. button.lid_init_state=open:
+A. button.lid_init_state=method:
+   When this option is specified, the ACPI button driver reports the
+   initial lid state using the returning value of the _LID control method
+   and whether the "opened"/"closed" events are paired fully relies on the
+   firmware implementation.
+   This option can be used to fix some platforms where the returning value
+   of the _LID control method is reliable but the initial lid state
+   notification is missing.
+   This option is the default behavior during the period the userspace
+   isn't ready to handle the buggy AML tables.
+B. button.lid_init_state=open:
    When this option is specified, the ACPI button driver always reports the
    initial lid state as "opened" and whether the "opened"/"closed" events
    are paired fully relies on the firmware implementation.
    This may fix some platforms where the returning value of the _LID
    control method is not reliable and the initial lid state notification is
    missing.
-   This option is the default behavior during the period the userspace
-   isn't ready to handle the buggy AML tables.
 
 If the userspace has been prepared to ignore the unreliable "opened" events
 and the unreliable initial state notification, Linux users should always
 use the following kernel parameter:
-B. button.lid_init_state=ignore:
+C. button.lid_init_state=ignore:
    When this option is specified, the ACPI button driver never reports the
    initial lid state and there is a compensation mechanism implemented to
    ensure that the reliable "closed" notifications can always be delievered

Documentation/admin-guide/pm/cpufreq.rst

@@ -1,4 +1,5 @@
 .. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>`
+.. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>`
 
 =======================
 CPU Performance Scaling
@@ -75,7 +76,7 @@ feedback registers, as that information is typically specific to the hardware
 interface it comes from and may not be easily represented in an abstract,
 platform-independent way.  For this reason, ``CPUFreq`` allows scaling drivers
 to bypass the governor layer and implement their own performance scaling
-algorithms.  That is done by the ``intel_pstate`` scaling driver.
+algorithms.  That is done by the |intel_pstate| scaling driver.
 
 
 ``CPUFreq`` Policy Objects
@@ -174,13 +175,13 @@ necessary to restart the scaling governor so that it can take the new online CPU
 into account.  That is achieved by invoking the governor's ``->stop`` and
 ``->start()`` callbacks, in this order, for the entire policy.
 
-As mentioned before, the ``intel_pstate`` scaling driver bypasses the scaling
+As mentioned before, the |intel_pstate| scaling driver bypasses the scaling
 governor layer of ``CPUFreq`` and provides its own P-state selection algorithms.
-Consequently, if ``intel_pstate`` is used, scaling governors are not attached to
+Consequently, if |intel_pstate| is used, scaling governors are not attached to
 new policy objects.  Instead, the driver's ``->setpolicy()`` callback is invoked
 to register per-CPU utilization update callbacks for each policy.  These
 callbacks are invoked by the CPU scheduler in the same way as for scaling
-governors, but in the ``intel_pstate`` case they both determine the P-state to
+governors, but in the |intel_pstate| case they both determine the P-state to
 use and change the hardware configuration accordingly in one go from scheduler
 context.
 
@@ -257,7 +258,7 @@ are the following:
 
 ``scaling_available_governors``
 	List of ``CPUFreq`` scaling governors present in the kernel that can
-	be attached to this policy or (if the ``intel_pstate`` scaling driver is
+	be attached to this policy or (if the |intel_pstate| scaling driver is
 	in use) list of scaling algorithms provided by the driver that can be
 	applied to this policy.
 
@@ -274,7 +275,7 @@ are the following:
 	the CPU is actually running at (due to hardware design and other
 	limitations).
 
-	Some scaling drivers (e.g. ``intel_pstate``) attempt to provide
+	Some scaling drivers (e.g. |intel_pstate|) attempt to provide
 	information more precisely reflecting the current CPU frequency through
 	this attribute, but that still may not be the exact current CPU
 	frequency as seen by the hardware at the moment.
@@ -284,13 +285,13 @@ are the following:
 
 ``scaling_governor``
 	The scaling governor currently attached to this policy or (if the
-	``intel_pstate`` scaling driver is in use) the scaling algorithm
+	|intel_pstate| scaling driver is in use) the scaling algorithm
 	provided by the driver that is currently applied to this policy.
 
 	This attribute is read-write and writing to it will cause a new scaling
 	governor to be attached to this policy or a new scaling algorithm
 	provided by the scaling driver to be applied to it (in the
-	``intel_pstate`` case), as indicated by the string written to this
+	|intel_pstate| case), as indicated by the string written to this
 	attribute (which must be one of the names listed by the
 	``scaling_available_governors`` attribute described above).
 
@@ -619,7 +620,7 @@ This file is located under :file:`/sys/devices/system/cpu/cpufreq/` and controls
 the "boost" setting for the whole system.  It is not present if the underlying
 scaling driver does not support the frequency boost mechanism (or supports it,
 but provides a driver-specific interface for controlling it, like
-``intel_pstate``).
+|intel_pstate|).
 
 If the value in this file is 1, the frequency boost mechanism is enabled.  This
 means that either the hardware can be put into states in which it is able to

Documentation/admin-guide/pm/index.rst

@@ -6,6 +6,7 @@ Power Management
    :maxdepth: 2
 
    cpufreq
+   intel_pstate
 
 .. only::  subproject and html
 

Documentation/admin-guide/pm/intel_pstate.rst

@@ -0,0 +1,755 @@
+===============================================
+``intel_pstate`` CPU Performance Scaling Driver
+===============================================
+
+::
+
+ Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+General Information
+===================
+
+``intel_pstate`` is a part of the
+:doc:`CPU performance scaling subsystem <cpufreq>` in the Linux kernel
+(``CPUFreq``).  It is a scaling driver for the Sandy Bridge and later
+generations of Intel processors.  Note, however, that some of those processors
+may not be supported.  [To understand ``intel_pstate`` it is necessary to know
+how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if
+you have not done that yet.]
+
+For the processors supported by ``intel_pstate``, the P-state concept is broader
+than just an operating frequency or an operating performance point (see the
+`LinuxCon Europe 2015 presentation by Kristen Accardi <LCEU2015_>`_ for more
+information about that).  For this reason, the representation of P-states used
+by ``intel_pstate`` internally follows the hardware specification (for details
+refer to `Intel® 64 and IA-32 Architectures Software Developer’s Manual
+Volume 3: System Programming Guide <SDM_>`_).  However, the ``CPUFreq`` core
+uses frequencies for identifying operating performance points of CPUs and
+frequencies are involved in the user space interface exposed by it, so
+``intel_pstate`` maps its internal representation of P-states to frequencies too
+(fortunately, that mapping is unambiguous).  At the same time, it would not be
+practical for ``intel_pstate`` to supply the ``CPUFreq`` core with a table of
+available frequencies due to the possible size of it, so the driver does not do
+that.  Some functionality of the core is limited by that.
+
+Since the hardware P-state selection interface used by ``intel_pstate`` is
+available at the logical CPU level, the driver always works with individual
+CPUs.  Consequently, if ``intel_pstate`` is in use, every ``CPUFreq`` policy
+object corresponds to one logical CPU and ``CPUFreq`` policies are effectively
+equivalent to CPUs.  In particular, this means that they become "inactive" every
+time the corresponding CPU is taken offline and need to be re-initialized when
+it goes back online.
+
+``intel_pstate`` is not modular, so it cannot be unloaded, which means that the
+only way to pass early-configuration-time parameters to it is via the kernel
+command line.  However, its configuration can be adjusted via ``sysfs`` to a
+great extent.  In some configurations it even is possible to unregister it via
+``sysfs`` which allows another ``CPUFreq`` scaling driver to be loaded and
+registered (see `below <status_attr_>`_).
+
+
+Operation Modes
+===============
+
+``intel_pstate`` can operate in three different modes: in the active mode with
+or without hardware-managed P-states support and in the passive mode.  Which of
+them will be in effect depends on what kernel command line options are used and
+on the capabilities of the processor.
+
+Active Mode
+-----------
+
+This is the default operation mode of ``intel_pstate``.  If it works in this
+mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
+policies contains the string "intel_pstate".
+
+In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
+provides its own scaling algorithms for P-state selection.  Those algorithms
+can be applied to ``CPUFreq`` policies in the same way as generic scaling
+governors (that is, through the ``scaling_governor`` policy attribute in
+``sysfs``).  [Note that different P-state selection algorithms may be chosen for
+different policies, but that is not recommended.]
+
+They are not generic scaling governors, but their names are the same as the
+names of some of those governors.  Moreover, confusingly enough, they generally
+do not work in the same way as the generic governors they share the names with.
+For example, the ``powersave`` P-state selection algorithm provided by
+``intel_pstate`` is not a counterpart of the generic ``powersave`` governor
+(roughly, it corresponds to the ``schedutil`` and ``ondemand`` governors).
+
+There are two P-state selection algorithms provided by ``intel_pstate`` in the
+active mode: ``powersave`` and ``performance``.  The way they both operate
+depends on whether or not the hardware-managed P-states (HWP) feature has been
+enabled in the processor and possibly on the processor model.
+
+Which of the P-state selection algorithms is used by default depends on the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option.
+Namely, if that option is set, the ``performance`` algorithm will be used by
+default, and the other one will be used by default if it is not set.
+
+Active Mode With HWP
+~~~~~~~~~~~~~~~~~~~~
+
+If the processor supports the HWP feature, it will be enabled during the
+processor initialization and cannot be disabled after that.  It is possible
+to avoid enabling it by passing the ``intel_pstate=no_hwp`` argument to the
+kernel in the command line.
+
+If the HWP feature has been enabled, ``intel_pstate`` relies on the processor to
+select P-states by itself, but still it can give hints to the processor's
+internal P-state selection logic.  What those hints are depends on which P-state
+selection algorithm has been applied to the given policy (or to the CPU it
+corresponds to).
+
+Even though the P-state selection is carried out by the processor automatically,
+``intel_pstate`` registers utilization update callbacks with the CPU scheduler
+in this mode.  However, they are not used for running a P-state selection
+algorithm, but for periodic updates of the current CPU frequency information to
+be made available from the ``scaling_cur_freq`` policy attribute in ``sysfs``.
+
+HWP + ``performance``
+.....................
+
+In this configuration ``intel_pstate`` will write 0 to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
+internal P-state selection logic is expected to focus entirely on performance.
+
+This will override the EPP/EPB setting coming from the ``sysfs`` interface
+(see `Energy vs Performance Hints`_ below).
+
+Also, in this configuration the range of P-states available to the processor's
+internal P-state selection logic is always restricted to the upper boundary
+(that is, the maximum P-state that the driver is allowed to use).
+
+HWP + ``powersave``
+...................
+
+In this configuration ``intel_pstate`` will set the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise) to whatever value it was
+previously set to via ``sysfs`` (or whatever default value it was
+set to by the platform firmware).  This usually causes the processor's
+internal P-state selection logic to be less performance-focused.
+
+Active Mode Without HWP
+~~~~~~~~~~~~~~~~~~~~~~~
+
+This is the default operation mode for processors that do not support the HWP
+feature.  It also is used by default with the ``intel_pstate=no_hwp`` argument
+in the kernel command line.  However, in this mode ``intel_pstate`` may refuse
+to work with the given processor if it does not recognize it.  [Note that
+``intel_pstate`` will never refuse to work with any processor with the HWP
+feature enabled.]
+
+In this mode ``intel_pstate`` registers utilization update callbacks with the
+CPU scheduler in order to run a P-state selection algorithm, either
+``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
+setting in ``sysfs``.  The current CPU frequency information to be made
+available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
+periodically updated by those utilization update callbacks too.
+
+``performance``
+...............
+
+Without HWP, this P-state selection algorithm is always the same regardless of
+the processor model and platform configuration.
+
+It selects the maximum P-state it is allowed to use, subject to limits set via
+``sysfs``, every time the P-state selection computations are carried out by the
+driver's utilization update callback for the given CPU (that does not happen
+more often than every 10 ms), but the hardware configuration will not be changed
+if the new P-state is the same as the current one.
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is set.
+
+``powersave``
+.............
+
+Without HWP, this P-state selection algorithm generally depends on the
+processor model and/or the system profile setting in the ACPI tables and there
+are two variants of it.
+
+One of them is used with processors from the Atom line and (regardless of the
+processor model) on platforms with the system profile in the ACPI tables set to
+"mobile" (laptops mostly), "tablet", "appliance PC", "desktop", or
+"workstation".  It is also used with processors supporting the HWP feature if
+that feature has not been enabled (that is, with the ``intel_pstate=no_hwp``
+argument in the kernel command line).  It is similar to the algorithm
+implemented by the generic ``schedutil`` scaling governor except that the
+utilization metric used by it is based on numbers coming from feedback
+registers of the CPU.  It generally selects P-states proportional to the
+current CPU utilization, so it is referred to as the "proportional" algorithm.
+
+The second variant of the ``powersave`` P-state selection algorithm, used in all
+of the other cases (generally, on processors from the Core line, so it is
+referred to as the "Core" algorithm), is based on the values read from the APERF
+and MPERF feedback registers and the previously requested target P-state.
+It does not really take CPU utilization into account explicitly, but as a rule
+it causes the CPU P-state to ramp up very quickly in response to increased
+utilization which is generally desirable in server environments.
+
+Regardless of the variant, this algorithm is run by the driver's utilization
+update callback for the given CPU when it is invoked by the CPU scheduler, but
+not more often than every 10 ms (that can be tweaked via ``debugfs`` in `this
+particular case <Tuning Interface in debugfs_>`_).  Like in the ``performance``
+case, the hardware configuration is not touched if the new P-state turns out to
+be the same as the current one.
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is not set.
+
+Passive Mode
+------------
+
+This mode is used if the ``intel_pstate=passive`` argument is passed to the
+kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
+Like in the active mode without HWP support, in this mode ``intel_pstate`` may
+refuse to work with the given processor if it does not recognize it.
+
+If the driver works in this mode, the ``scaling_driver`` policy attribute in
+``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
+Then, the driver behaves like a regular ``CPUFreq`` scaling driver.  That is,
+it is invoked by generic scaling governors when necessary to talk to the
+hardware in order to change the P-state of a CPU (in particular, the
+``schedutil`` governor can invoke it directly from scheduler context).
+
+While in this mode, ``intel_pstate`` can be used with all of the (generic)
+scaling governors listed by the ``scaling_available_governors`` policy attribute
+in ``sysfs`` (and the P-state selection algorithms described above are not
+used).  Then, it is responsible for the configuration of policy objects
+corresponding to CPUs and provides the ``CPUFreq`` core (and the scaling
+governors attached to the policy objects) with accurate information on the
+maximum and minimum operating frequencies supported by the hardware (including
+the so-called "turbo" frequency ranges).  In other words, in the passive mode
+the entire range of available P-states is exposed by ``intel_pstate`` to the
+``CPUFreq`` core.  However, in this mode the driver does not register
+utilization update callbacks with the CPU scheduler and the ``scaling_cur_freq``
+information comes from the ``CPUFreq`` core (and is the last frequency selected
+by the current scaling governor for the given policy).
+
+
+.. _turbo:
+
+Turbo P-states Support
+======================
+
+In the majority of cases, the entire range of P-states available to
+``intel_pstate`` can be divided into two sub-ranges that correspond to
+different types of processor behavior, above and below a boundary that
+will be referred to as the "turbo threshold" in what follows.
+
+The P-states above the turbo threshold are referred to as "turbo P-states" and
+the whole sub-range of P-states they belong to is referred to as the "turbo
+range".  These names are related to the Turbo Boost technology allowing a
+multicore processor to opportunistically increase the P-state of one or more
+cores if there is enough power to do that and if that is not going to cause the
+thermal envelope of the processor package to be exceeded.
+
+Specifically, if software sets the P-state of a CPU core within the turbo range
+(that is, above the turbo threshold), the processor is permitted to take over
+performance scaling control for that core and put it into turbo P-states of its
+choice going forward.  However, that permission is interpreted differently by
+different processor generations.  Namely, the Sandy Bridge generation of
+processors will never use any P-states above the last one set by software for
+the given core, even if it is within the turbo range, whereas all of the later
+processor generations will take it as a license to use any P-states from the
+turbo range, even above the one set by software.  In other words, on those
+processors setting any P-state from the turbo range will enable the processor
+to put the given core into all turbo P-states up to and including the maximum
+supported one as it sees fit.
+
+One important property of turbo P-states is that they are not sustainable.  More
+precisely, there is no guarantee that any CPUs will be able to stay in any of
+those states indefinitely, because the power distribution within the processor
+package may change over time  or the thermal envelope it was designed for might
+be exceeded if a turbo P-state was used for too long.
+
+In turn, the P-states below the turbo threshold generally are sustainable.  In
+fact, if one of them is set by software, the processor is not expected to change
+it to a lower one unless in a thermal stress or a power limit violation
+situation (a higher P-state may still be used if it is set for another CPU in
+the same package at the same time, for example).
+
+Some processors allow multiple cores to be in turbo P-states at the same time,
+but the maximum P-state that can be set for them generally depends on the number
+of cores running concurrently.  The maximum turbo P-state that can be set for 3
+cores at the same time usually is lower than the analogous maximum P-state for
+2 cores, which in turn usually is lower than the maximum turbo P-state that can
+be set for 1 core.  The one-core maximum turbo P-state is thus the maximum
+supported one overall.
+
+The maximum supported turbo P-state, the turbo threshold (the maximum supported
+non-turbo P-state) and the minimum supported P-state are specific to the
+processor model and can be determined by reading the processor's model-specific
+registers (MSRs).  Moreover, some processors support the Configurable TDP
+(Thermal Design Power) feature and, when that feature is enabled, the turbo
+threshold effectively becomes a configurable value that can be set by the
+platform firmware.
+
+Unlike ``_PSS`` objects in the ACPI tables, ``intel_pstate`` always exposes
+the entire range of available P-states, including the whole turbo range, to the
+``CPUFreq`` core and (in the passive mode) to generic scaling governors.  This
+generally causes turbo P-states to be set more often when ``intel_pstate`` is
+used relative to ACPI-based CPU performance scaling (see `below <acpi-cpufreq_>`_
+for more information).
+
+Moreover, since ``intel_pstate`` always knows what the real turbo threshold is
+(even if the Configurable TDP feature is enabled in the processor), its
+``no_turbo`` attribute in ``sysfs`` (described `below <no_turbo_attr_>`_) should
+work as expected in all cases (that is, if set to disable turbo P-states, it
+always should prevent ``intel_pstate`` from using them).
+
+
+Processor Support
+=================
+
+To handle a given processor ``intel_pstate`` requires a number of different
+pieces of information on it to be known, including:
+
+ * The minimum supported P-state.
+
+ * The maximum supported `non-turbo P-state <turbo_>`_.
+
+ * Whether or not turbo P-states are supported at all.
+
+ * The maximum supported `one-core turbo P-state <turbo_>`_ (if turbo P-states
+   are supported).
+
+ * The scaling formula to translate the driver's internal representation
+   of P-states into frequencies and the other way around.
+
+Generally, ways to obtain that information are specific to the processor model
+or family.  Although it often is possible to obtain all of it from the processor
+itself (using model-specific registers), there are cases in which hardware
+manuals need to be consulted to get to it too.
+
+For this reason, there is a list of supported processors in ``intel_pstate`` and
+the driver initialization will fail if the detected processor is not in that
+list, unless it supports the `HWP feature <Active Mode_>`_.  [The interface to
+obtain all of the information listed above is the same for all of the processors
+supporting the HWP feature, which is why they all are supported by
+``intel_pstate``.]
+
+
+User Space Interface in ``sysfs``
+=================================
+
+Global Attributes
+-----------------
+
+``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level.  They are located in the
+``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
+CPUs.
+
+Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
+argument is passed to the kernel in the command line.
+
+``max_perf_pct``
+	Maximum P-state the driver is allowed to set in percent of the
+	maximum supported performance level (the highest supported `turbo
+	P-state <turbo_>`_).
+
+	This attribute will not be exposed if the
+	``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+	command line.
+
+``min_perf_pct``
+	Minimum P-state the driver is allowed to set in percent of the
+	maximum supported performance level (the highest supported `turbo
+	P-state <turbo_>`_).
+
+	This attribute will not be exposed if the
+	``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+	command line.
+
+``num_pstates``
+	Number of P-states supported by the processor (between 0 and 255
+	inclusive) including both turbo and non-turbo P-states (see
+	`Turbo P-states Support`_).
+
+	The value of this attribute is not affected by the ``no_turbo``
+	setting described `below <no_turbo_attr_>`_.
+
+	This attribute is read-only.
+
+``turbo_pct``
+	Ratio of the `turbo range <turbo_>`_ size to the size of the entire
+	range of supported P-states, in percent.
+
+	This attribute is read-only.
+
+.. _no_turbo_attr:
+
+``no_turbo``
+	If set (equal to 1), the driver is not allowed to set any turbo P-states
+	(see `Turbo P-states Support`_).  If unset (equalt to 0, which is the
+	default), turbo P-states can be set by the driver.
+	[Note that ``intel_pstate`` does not support the general ``boost``
+	attribute (supported by some other scaling drivers) which is replaced
+	by this one.]
+
+	This attrubute does not affect the maximum supported frequency value
+	supplied to the ``CPUFreq`` core and exposed via the policy interface,
+	but it affects the maximum possible value of per-policy P-state	limits
+	(see `Interpretation of Policy Attributes`_ below for details).
+
+.. _status_attr:
+
+``status``
+	Operation mode of the driver: "active", "passive" or "off".
+
+	"active"
+		The driver is functional and in the `active mode
+		<Active Mode_>`_.
+
+	"passive"
+		The driver is functional and in the `passive mode
+		<Passive Mode_>`_.
+
+	"off"
+		The driver is not functional (it is not registered as a scaling
+		driver with the ``CPUFreq`` core).
+
+	This attribute can be written to in order to change the driver's
+	operation mode or to unregister it.  The string written to it must be
+	one of the possible values of it and, if successful, the write will
+	cause the driver to switch over to the operation mode represented by
+	that string - or to be unregistered in the "off" case.  [Actually,
+	switching over from the active mode to the passive mode or the other
+	way around causes the driver to be unregistered and registered again
+	with a different set of callbacks, so all of its settings (the global
+	as well as the per-policy ones) are then reset to their default
+	values, possibly depending on the target operation mode.]
+
+	That only is supported in some configurations, though (for example, if
+	the `HWP feature is enabled in the processor <Active Mode With HWP_>`_,
+	the operation mode of the driver cannot be changed), and if it is not
+	supported in the current configuration, writes to this attribute with
+	fail with an appropriate error.
+
+Interpretation of Policy Attributes
+-----------------------------------
+
+The interpretation of some ``CPUFreq`` policy attributes described in
+:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver
+and it generally depends on the driver's `operation mode <Operation Modes_>`_.
+
+First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and
+``scaling_cur_freq`` attributes are produced by applying a processor-specific
+multiplier to the internal P-state representation used by ``intel_pstate``.
+Also, the values of the ``scaling_max_freq`` and ``scaling_min_freq``
+attributes are capped by the frequency corresponding to the maximum P-state that
+the driver is allowed to set.
+
+If the ``no_turbo`` `global attribute <no_turbo_attr_>`_ is set, the driver is
+not allowed to use turbo P-states, so the maximum value of ``scaling_max_freq``
+and ``scaling_min_freq`` is limited to the maximum non-turbo P-state frequency.
+Accordingly, setting ``no_turbo`` causes ``scaling_max_freq`` and
+``scaling_min_freq`` to go down to that value if they were above it before.
+However, the old values of ``scaling_max_freq`` and ``scaling_min_freq`` will be
+restored after unsetting ``no_turbo``, unless these attributes have been written
+to after ``no_turbo`` was set.
+
+If ``no_turbo`` is not set, the maximum possible value of ``scaling_max_freq``
+and ``scaling_min_freq`` corresponds to the maximum supported turbo P-state,
+which also is the value of ``cpuinfo_max_freq`` in either case.
+
+Next, the following policy attributes have special meaning if
+``intel_pstate`` works in the `active mode <Active Mode_>`_:
+
+``scaling_available_governors``
+	List of P-state selection algorithms provided by ``intel_pstate``.
+
+``scaling_governor``
+	P-state selection algorithm provided by ``intel_pstate`` currently in
+	use with the given policy.
+
+``scaling_cur_freq``
+	Frequency of the average P-state of the CPU represented by the given
+	policy for the time interval between the last two invocations of the
+	driver's utilization update callback by the CPU scheduler for that CPU.
+
+The meaning of these attributes in the `passive mode <Passive Mode_>`_ is the
+same as for other scaling drivers.
+
+Additionally, the value of the ``scaling_driver`` attribute for ``intel_pstate``
+depends on the operation mode of the driver.  Namely, it is either
+"intel_pstate" (in the `active mode <Active Mode_>`_) or "intel_cpufreq" (in the
+`passive mode <Passive Mode_>`_).
+
+Coordination of P-State Limits
+------------------------------
+
+``intel_pstate`` allows P-state limits to be set in two ways: with the help of
+the ``max_perf_pct`` and ``min_perf_pct`` `global attributes
+<Global Attributes_>`_ or via the ``scaling_max_freq`` and ``scaling_min_freq``
+``CPUFreq`` policy attributes.  The coordination between those limits is based
+on the following rules, regardless of the current operation mode of the driver:
+
+ 1. All CPUs are affected by the global limits (that is, none of them can be
+    requested to run faster than the global maximum and none of them can be
+    requested to run slower than the global minimum).
+
+ 2. Each individual CPU is affected by its own per-policy limits (that is, it
+    cannot be requested to run faster than its own per-policy maximum and it
+    cannot be requested to run slower than its own per-policy minimum).
+
+ 3. The global and per-policy limits can be set independently.
+
+If the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, the
+resulting effective values are written into its registers whenever the limits
+change in order to request its internal P-state selection logic to always set
+P-states within these limits.  Otherwise, the limits are taken into account by
+scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver
+every time before setting a new P-state for a CPU.
+
+Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument
+is passed to the kernel, ``max_perf_pct`` and ``min_perf_pct`` are not exposed
+at all and the only way to set the limits is by using the policy attributes.
+
+
+Energy vs Performance Hints
+---------------------------
+
+If ``intel_pstate`` works in the `active mode with the HWP feature enabled
+<Active Mode With HWP_>`_ in the processor, additional attributes are present
+in every ``CPUFreq`` policy directory in ``sysfs``.  They are intended to allow
+user space to help ``intel_pstate`` to adjust the processor's internal P-state
+selection logic by focusing it on performance or on energy-efficiency, or
+somewhere between the two extremes:
+
+``energy_performance_preference``
+	Current value of the energy vs performance hint for the given policy
+	(or the CPU represented by it).
+
+	The hint can be changed by writing to this attribute.
+
+``energy_performance_available_preferences``
+	List of strings that can be written to the
+	``energy_performance_preference`` attribute.
+
+	They represent different energy vs performance hints and should be
+	self-explanatory, except that ``default`` represents whatever hint
+	value was set by the platform firmware.
+
+Strings written to the ``energy_performance_preference`` attribute are
+internally translated to integer values written to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob.
+
+[Note that tasks may by migrated from one CPU to another by the scheduler's
+load-balancing algorithm and if different energy vs performance hints are
+set for those CPUs, that may lead to undesirable outcomes.  To avoid such
+issues it is better to set the same energy vs performance hint for all CPUs
+or to pin every task potentially sensitive to them to a specific CPU.]
+
+.. _acpi-cpufreq:
+
+``intel_pstate`` vs ``acpi-cpufreq``
+====================================
+
+On the majority of systems supported by ``intel_pstate``, the ACPI tables
+provided by the platform firmware contain ``_PSS`` objects returning information
+that can be used for CPU performance scaling (refer to the `ACPI specification`_
+for details on the ``_PSS`` objects and the format of the information returned
+by them).
+
+The information returned by the ACPI ``_PSS`` objects is used by the
+``acpi-cpufreq`` scaling driver.  On systems supported by ``intel_pstate``
+the ``acpi-cpufreq`` driver uses the same hardware CPU performance scaling
+interface, but the set of P-states it can use is limited by the ``_PSS``
+output.
+
+On those systems each ``_PSS`` object returns a list of P-states supported by
+the corresponding CPU which basically is a subset of the P-states range that can
+be used by ``intel_pstate`` on the same system, with one exception: the whole
+`turbo range <turbo_>`_ is represented by one item in it (the topmost one).  By
+convention, the frequency returned by ``_PSS`` for that item is greater by 1 MHz
+than the frequency of the highest non-turbo P-state listed by it, but the
+corresponding P-state representation (following the hardware specification)
+returned for it matches the maximum supported turbo P-state (or is the
+special value 255 meaning essentially "go as high as you can get").
+
+The list of P-states returned by ``_PSS`` is reflected by the table of
+available frequencies supplied by ``acpi-cpufreq`` to the ``CPUFreq`` core and
+scaling governors and the minimum and maximum supported frequencies reported by
+it come from that list as well.  In particular, given the special representation
+of the turbo range described above, this means that the maximum supported
+frequency reported by ``acpi-cpufreq`` is higher by 1 MHz than the frequency
+of the highest supported non-turbo P-state listed by ``_PSS`` which, of course,
+affects decisions made by the scaling governors, except for ``powersave`` and
+``performance``.
+
+For example, if a given governor attempts to select a frequency proportional to
+estimated CPU load and maps the load of 100% to the maximum supported frequency
+(possibly multiplied by a constant), then it will tend to choose P-states below
+the turbo threshold if ``acpi-cpufreq`` is used as the scaling driver, because
+in that case the turbo range corresponds to a small fraction of the frequency
+band it can use (1 MHz vs 1 GHz or more).  In consequence, it will only go to
+the turbo range for the highest loads and the other loads above 50% that might
+benefit from running at turbo frequencies will be given non-turbo P-states
+instead.
+
+One more issue related to that may appear on systems supporting the
+`Configurable TDP feature <turbo_>`_ allowing the platform firmware to set the
+turbo threshold.  Namely, if that is not coordinated with the lists of P-states
+returned by ``_PSS`` properly, there may be more than one item corresponding to
+a turbo P-state in those lists and there may be a problem with avoiding the
+turbo range (if desirable or necessary).  Usually, to avoid using turbo
+P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state listed
+by ``_PSS``, but that is not sufficient when there are other turbo P-states in
+the list returned by it.
+
+Apart from the above, ``acpi-cpufreq`` works like ``intel_pstate`` in the
+`passive mode <Passive Mode_>`_, except that the number of P-states it can set
+is limited to the ones listed by the ACPI ``_PSS`` objects.
+
+
+Kernel Command Line Options for ``intel_pstate``
+================================================
+
+Several kernel command line options can be used to pass early-configuration-time
+parameters to ``intel_pstate`` in order to enforce specific behavior of it.  All
+of them have to be prepended with the ``intel_pstate=`` prefix.
+
+``disable``
+	Do not register ``intel_pstate`` as the scaling driver even if the
+	processor is supported by it.
+
+``passive``
+	Register ``intel_pstate`` in the `passive mode <Passive Mode_>`_ to
+	start with.
+
+	This option implies the ``no_hwp`` one described below.
+
+``force``
+	Register ``intel_pstate`` as the scaling driver instead of
+	``acpi-cpufreq`` even if the latter is preferred on the given system.
+
+	This may prevent some platform features (such as thermal controls and
+	power capping) that rely on the availability of ACPI P-states
+	information from functioning as expected, so it should be used with
+	caution.
+
+	This option does not work with processors that are not supported by
+	``intel_pstate`` and on platforms where the ``pcc-cpufreq`` scaling
+	driver is used instead of ``acpi-cpufreq``.
+
+``no_hwp``
+	Do not enable the `hardware-managed P-states (HWP) feature
+	<Active Mode With HWP_>`_ even if it is supported by the processor.
+
+``hwp_only``
+	Register ``intel_pstate`` as the scaling driver only if the
+	`hardware-managed P-states (HWP) feature <Active Mode With HWP_>`_ is
+	supported by the processor.
+
+``support_acpi_ppc``
+	Take ACPI ``_PPC`` performance limits into account.
+
+	If the preferred power management profile in the FADT (Fixed ACPI
+	Description Table) is set to "Enterprise Server" or "Performance
+	Server", the ACPI ``_PPC`` limits are taken into account by default
+	and this option has no effect.
+
+``per_cpu_perf_limits``
+	Use per-logical-CPU P-State limits (see `Coordination of P-state
+	Limits`_ for details).
+
+
+Diagnostics and Tuning
+======================
+
+Trace Events
+------------
+
+There are two static trace events that can be used for ``intel_pstate``
+diagnostics.  One of them is the ``cpu_frequency`` trace event generally used
+by ``CPUFreq``, and the other one is the ``pstate_sample`` trace event specific
+to ``intel_pstate``.  Both of them are triggered by ``intel_pstate`` only if
+it works in the `active mode <Active Mode_>`_.
+
+The following sequence of shell commands can be used to enable them and see
+their output (if the kernel is generally configured to support event tracing)::
+
+ # cd /sys/kernel/debug/tracing/
+ # echo 1 > events/power/pstate_sample/enable
+ # echo 1 > events/power/cpu_frequency/enable
+ # cat trace
+ gnome-terminal--4510  [001] ..s.  1177.680733: pstate_sample: core_busy=107 scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618 freq=2474476
+ cat-5235  [002] ..s.  1177.681723: cpu_frequency: state=2900000 cpu_id=2
+
+If ``intel_pstate`` works in the `passive mode <Passive Mode_>`_, the
+``cpu_frequency`` trace event will be triggered either by the ``schedutil``
+scaling governor (for the policies it is attached to), or by the ``CPUFreq``
+core (for the policies with other scaling governors).
+
+``ftrace``
+----------
+
+The ``ftrace`` interface can be used for low-level diagnostics of
+``intel_pstate``.  For example, to check how often the function to set a
+P-state is called, the ``ftrace`` filter can be set to to
+:c:func:`intel_pstate_set_pstate`::
+
+ # cd /sys/kernel/debug/tracing/
+ # cat available_filter_functions | grep -i pstate
+ intel_pstate_set_pstate
+ intel_pstate_cpu_init
+ ...
+ # echo intel_pstate_set_pstate > set_ftrace_filter
+ # echo function > current_tracer
+ # cat trace | head -15
+ # tracer: function
+ #
+ # entries-in-buffer/entries-written: 80/80   #P:4
+ #
+ #                              _-----=> irqs-off
+ #                             / _----=> need-resched
+ #                            | / _---=> hardirq/softirq
+ #                            || / _--=> preempt-depth
+ #                            ||| /     delay
+ #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
+ #              | |       |   ||||       |         |
+             Xorg-3129  [000] ..s.  2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
+  gnome-terminal--4510  [002] ..s.  2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
+      gnome-shell-3409  [001] ..s.  2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
+           <idle>-0     [000] ..s.  2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
+
+Tuning Interface in ``debugfs``
+-------------------------------
+
+The ``powersave`` algorithm provided by ``intel_pstate`` for `the Core line of
+processors in the active mode <powersave_>`_ is based on a `PID controller`_
+whose parameters were chosen to address a number of different use cases at the
+same time.  However, it still is possible to fine-tune it to a specific workload
+and the ``debugfs`` interface under ``/sys/kernel/debug/pstate_snb/`` is
+provided for this purpose.  [Note that the ``pstate_snb`` directory will be
+present only if the specific P-state selection algorithm matching the interface
+in it actually is in use.]
+
+The following files present in that directory can be used to modify the PID
+controller parameters at run time:
+
+| ``deadband``
+| ``d_gain_pct``
+| ``i_gain_pct``
+| ``p_gain_pct``
+| ``sample_rate_ms``
+| ``setpoint``
+
+Note, however, that achieving desirable results this way generally requires
+expert-level understanding of the power vs performance tradeoff, so extra care
+is recommended when attempting to do that.
+
+
+.. _LCEU2015: http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
+.. _SDM: http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html
+.. _ACPI specification: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
+.. _PID controller: https://en.wikipedia.org/wiki/PID_controller

Documentation/cpu-freq/intel-pstate.txt

@@ -1,281 +0,0 @@
-Intel P-State driver
---------------------
-
-This driver provides an interface to control the P-State selection for the
-SandyBridge+ Intel processors.
-
-The following document explains P-States:
-http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
-As stated in the document, P-State doesn’t exactly mean a frequency. However, for
-the sake of the relationship with cpufreq, P-State and frequency are used
-interchangeably.
-
-Understanding the cpufreq core governors and policies are important before
-discussing more details about the Intel P-State driver. Based on what callbacks
-a cpufreq driver provides to the cpufreq core, it can support two types of
-drivers:
-- with target_index() callback: In this mode, the drivers using cpufreq core
-simply provide the minimum and maximum frequency limits and an additional
-interface target_index() to set the current frequency. The cpufreq subsystem
-has a number of scaling governors ("performance", "powersave", "ondemand",
-etc.). Depending on which governor is in use, cpufreq core will call for
-transitions to a specific frequency using target_index() callback.
-- setpolicy() callback: In this mode, drivers do not provide target_index()
-callback, so cpufreq core can't request a transition to a specific frequency.
-The driver provides minimum and maximum frequency limits and callbacks to set a
-policy. The policy in cpufreq sysfs is referred to as the "scaling governor".
-The cpufreq core can request the driver to operate in any of the two policies:
-"performance" and "powersave". The driver decides which frequency to use based
-on the above policy selection considering minimum and maximum frequency limits.
-
-The Intel P-State driver falls under the latter category, which implements the
-setpolicy() callback. This driver decides what P-State to use based on the
-requested policy from the cpufreq core. If the processor is capable of
-selecting its next P-State internally, then the driver will offload this
-responsibility to the processor (aka HWP: Hardware P-States). If not, the
-driver implements algorithms to select the next P-State.
-
-Since these policies are implemented in the driver, they are not same as the
-cpufreq scaling governors implementation, even if they have the same name in
-the cpufreq sysfs (scaling_governors). For example the "performance" policy is
-similar to cpufreq’s "performance" governor, but "powersave" is completely
-different than the cpufreq "powersave" governor. The strategy here is similar
-to cpufreq "ondemand", where the requested P-State is related to the system load.
-
-Sysfs Interface
-
-In addition to the frequency-controlling interfaces provided by the cpufreq
-core, the driver provides its own sysfs files to control the P-State selection.
-These files have been added to /sys/devices/system/cpu/intel_pstate/.
-Any changes made to these files are applicable to all CPUs (even in a
-multi-package system, Refer to later section on placing "Per-CPU limits").
-
-      max_perf_pct: Limits the maximum P-State that will be requested by
-      the driver. It states it as a percentage of the available performance. The
-      available (P-State) performance may be reduced by the no_turbo
-      setting described below.
-
-      min_perf_pct: Limits the minimum P-State that will be requested by
-      the driver. It states it as a percentage of the max (non-turbo)
-      performance level.
-
-      no_turbo: Limits the driver to selecting P-State below the turbo
-      frequency range.
-
-      turbo_pct: Displays the percentage of the total performance that
-      is supported by hardware that is in the turbo range. This number
-      is independent of whether turbo has been disabled or not.
-
-      num_pstates: Displays the number of P-States that are supported
-      by hardware. This number is independent of whether turbo has
-      been disabled or not.
-
-For example, if a system has these parameters:
-	Max 1 core turbo ratio: 0x21 (Max 1 core ratio is the maximum P-State)
-	Max non turbo ratio: 0x17
-	Minimum ratio : 0x08 (Here the ratio is called max efficiency ratio)
-
-Sysfs will show :
-	max_perf_pct:100, which corresponds to 1 core ratio
-	min_perf_pct:24, max_efficiency_ratio / max 1 Core ratio
-	no_turbo:0, turbo is not disabled
-	num_pstates:26 = (max 1 Core ratio - Max Efficiency Ratio + 1)
-	turbo_pct:39 = (max 1 core ratio - max non turbo ratio) / num_pstates
-
-Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual
-Volume 3: System Programming Guide" to understand ratios.
-
-There is one more sysfs attribute in /sys/devices/system/cpu/intel_pstate/
-that can be used for controlling the operation mode of the driver:
-
-      status: Three settings are possible:
-      "off"     - The driver is not in use at this time.
-      "active"  - The driver works as a P-state governor (default).
-      "passive" - The driver works as a regular cpufreq one and collaborates
-                  with the generic cpufreq governors (it sets P-states as
-                  requested by those governors).
-      The current setting is returned by reads from this attribute.  Writing one
-      of the above strings to it changes the operation mode as indicated by that
-      string, if possible.  If HW-managed P-states (HWP) are enabled, it is not
-      possible to change the driver's operation mode and attempts to write to
-      this attribute will fail.
-
-cpufreq sysfs for Intel P-State
-
-Since this driver registers with cpufreq, cpufreq sysfs is also presented.
-There are some important differences, which need to be considered.
-
-scaling_cur_freq: This displays the real frequency which was used during
-the last sample period instead of what is requested. Some other cpufreq driver,
-like acpi-cpufreq, displays what is requested (Some changes are on the
-way to fix this for acpi-cpufreq driver). The same is true for frequencies
-displayed at /proc/cpuinfo.
-
-scaling_governor: This displays current active policy. Since each CPU has a
-cpufreq sysfs, it is possible to set a scaling governor to each CPU. But this
-is not possible with Intel P-States, as there is one common policy for all
-CPUs. Here, the last requested policy will be applicable to all CPUs. It is
-suggested that one use the cpupower utility to change policy to all CPUs at the
-same time.
-
-scaling_setspeed: This attribute can never be used with Intel P-State.
-
-scaling_max_freq/scaling_min_freq: This interface can be used similarly to
-the max_perf_pct/min_perf_pct of Intel P-State sysfs. However since frequencies
-are converted to nearest possible P-State, this is prone to rounding errors.
-This method is not preferred to limit performance.
-
-affected_cpus: Not used
-related_cpus: Not used
-
-For contemporary Intel processors, the frequency is controlled by the
-processor itself and the P-State exposed to software is related to
-performance levels.  The idea that frequency can be set to a single
-frequency is fictional for Intel Core processors. Even if the scaling
-driver selects a single P-State, the actual frequency the processor
-will run at is selected by the processor itself.
-
-Per-CPU limits
-
-The kernel command line option "intel_pstate=per_cpu_perf_limits" forces
-the intel_pstate driver to use per-CPU performance limits.  When it is set,
-the sysfs control interface described above is subject to limitations.
-- The following controls are not available for both read and write
-	/sys/devices/system/cpu/intel_pstate/max_perf_pct
-	/sys/devices/system/cpu/intel_pstate/min_perf_pct
-- The following controls can be used to set performance limits, as far as the
-architecture of the processor permits:
-	/sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
-	/sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq
-	/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
-- User can still observe turbo percent and number of P-States from
-	/sys/devices/system/cpu/intel_pstate/turbo_pct
-	/sys/devices/system/cpu/intel_pstate/num_pstates
-- User can read write system wide turbo status
-	/sys/devices/system/cpu/no_turbo
-
-Support of energy performance hints
-It is possible to provide hints to the HWP algorithms in the processor
-to be more performance centric to more energy centric. When the driver
-is using HWP, two additional cpufreq sysfs attributes are presented for
-each logical CPU.
-These attributes are:
-	- energy_performance_available_preferences
-	- energy_performance_preference
-
-To get list of supported hints:
-$ cat energy_performance_available_preferences
-    default performance balance_performance balance_power power
-
-The current preference can be read or changed via cpufreq sysfs
-attribute "energy_performance_preference". Reading from this attribute
-will display current effective setting. User can write any of the valid
-preference string to this attribute. User can always restore to power-on
-default by writing "default".
-
-Since threads can migrate to different CPUs, this is possible that the
-new CPU may have different energy performance preference than the previous
-one. To avoid such issues, either threads can be pinned to specific CPUs
-or set the same energy performance preference value to all CPUs.
-
-Tuning Intel P-State driver
-
-When the performance can be tuned using PID (Proportional Integral
-Derivative) controller, debugfs files are provided for adjusting performance.
-They are presented under:
-/sys/kernel/debug/pstate_snb/
-
-The PID tunable parameters are:
-      deadband
-      d_gain_pct
-      i_gain_pct
-      p_gain_pct
-      sample_rate_ms
-      setpoint
-
-To adjust these parameters, some understanding of driver implementation is
-necessary. There are some tweeks described here, but be very careful. Adjusting
-them requires expert level understanding of power and performance relationship.
-These limits are only useful when the "powersave" policy is active.
-
--To make the system more responsive to load changes, sample_rate_ms can
-be adjusted  (current default is 10ms).
--To make the system use higher performance, even if the load is lower, setpoint
-can be adjusted to a lower number. This will also lead to faster ramp up time
-to reach the maximum P-State.
-If there are no derivative and integral coefficients, The next P-State will be
-equal to:
-	current P-State - ((setpoint - current cpu load) * p_gain_pct)
-
-For example, if the current PID parameters are (Which are defaults for the core
-processors like SandyBridge):
-      deadband = 0
-      d_gain_pct = 0
-      i_gain_pct = 0
-      p_gain_pct = 20
-      sample_rate_ms = 10
-      setpoint = 97
-
-If the current P-State = 0x08 and current load = 100, this will result in the
-next P-State = 0x08 - ((97 - 100) * 0.2) = 8.6 (rounded to 9). Here the P-State
-goes up by only 1. If during next sample interval the current load doesn't
-change and still 100, then P-State goes up by one again. This process will
-continue as long as the load is more than the setpoint until the maximum P-State
-is reached.
-
-For the same load at setpoint = 60, this will result in the next P-State
-= 0x08 - ((60 - 100) * 0.2) = 16
-So by changing the setpoint from 97 to 60, there is an increase of the
-next P-State from 9 to 16. So this will make processor execute at higher
-P-State for the same CPU load. If the load continues to be more than the
-setpoint during next sample intervals, then P-State will go up again till the
-maximum P-State is reached. But the ramp up time to reach the maximum P-State
-will be much faster when the setpoint is 60 compared to 97.
-
-Debugging Intel P-State driver
-
-Event tracing
-To debug P-State transition, the Linux event tracing interface can be used.
-There are two specific events, which can be enabled (Provided the kernel
-configs related to event tracing are enabled).
-
-# cd /sys/kernel/debug/tracing/
-# echo 1 > events/power/pstate_sample/enable
-# echo 1 > events/power/cpu_frequency/enable
-# cat trace
-gnome-terminal--4510  [001] ..s.  1177.680733: pstate_sample: core_busy=107
-	scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618
-		freq=2474476
-cat-5235  [002] ..s.  1177.681723: cpu_frequency: state=2900000 cpu_id=2
-
-
-Using ftrace
-
-If function level tracing is required, the Linux ftrace interface can be used.
-For example if we want to check how often a function to set a P-State is
-called, we can set ftrace filter to intel_pstate_set_pstate.
-
-# cd /sys/kernel/debug/tracing/
-# cat available_filter_functions | grep -i pstate
-intel_pstate_set_pstate
-intel_pstate_cpu_init
-...
-
-# echo intel_pstate_set_pstate > set_ftrace_filter
-# echo function > current_tracer
-# cat trace | head -15
-# tracer: function
-#
-# entries-in-buffer/entries-written: 80/80   #P:4
-#
-#                              _-----=> irqs-off
-#                             / _----=> need-resched
-#                            | / _---=> hardirq/softirq
-#                            || / _--=> preempt-depth
-#                            ||| /     delay
-#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
-#              | |       |   ||||       |         |
-            Xorg-3129  [000] ..s.  2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
- gnome-terminal--4510  [002] ..s.  2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
-     gnome-shell-3409  [001] ..s.  2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
-          <idle>-0     [000] ..s.  2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

@@ -36,7 +36,7 @@ Optional properties:
                 control gpios
 
  - threshold:   allows setting the "click"-threshold in the range
-                from 20 to 80.
+                from 0 to 80.
 
  - gain:        allows setting the sensitivity in the range from 0 to
                 31. Note that lower values indicate higher

Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt

@@ -16,6 +16,11 @@ Required properties:
 - reg:                  Base address of PMIC on Hi6220 SoC.
 - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
 - pmic-gpios:           The GPIO used by PMIC IRQ.
+- #clock-cells:		From common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+  default output clock name
 
 Example:
 	pmic: pmic@f8000000 {
@@ -24,4 +29,5 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		#clock-cells = <0>;
 	}

Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt

@@ -18,6 +18,8 @@ Optional properties:
   "ext_clock" (External clock provided to the card).
 - post-power-on-delay-ms : Delay in ms after powering the card and
 	de-asserting the reset-gpios (if any)
+- power-off-delay-us : Delay in us after asserting the reset-gpios (if any)
+	during power off of the card.
 
 Example:
 

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -15,6 +15,10 @@ Optional properties:
 - phy-reset-active-high : If present then the reset sequence using the GPIO
   specified in the "phy-reset-gpios" property is reversed (H=reset state,
   L=operation state).
+- phy-reset-post-delay : Post reset delay in milliseconds. If present then
+  a delay of phy-reset-post-delay milliseconds will be observed after the
+  phy-reset-gpios has been toggled. Can be omitted thus no delay is
+  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
 - phy-supply : regulator that powers the Ethernet PHY.
 - phy-handle : phandle to the PHY device connected to this device.
 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -10,6 +10,7 @@ Required properties:
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
   - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
   - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
   - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;

Documentation/input/devices/edt-ft5x06.rst

@@ -15,7 +15,7 @@ It has been tested with the following devices:
 The driver allows configuration of the touch screen via a set of sysfs files:
 
 /sys/class/input/eventX/device/device/threshold:
-    allows setting the "click"-threshold in the range from 20 to 80.
+    allows setting the "click"-threshold in the range from 0 to 80.
 
 /sys/class/input/eventX/device/device/gain:
     allows setting the sensitivity in the range from 0 to 31. Note that

Documentation/sound/hd-audio/models.rst

@@ -16,6 +16,8 @@ ALC880
     6-jack in back, 2-jack in front
 6stack-digout
     6-jack with a SPDIF out
+6stack-automute
+    6-jack with headphone jack detection
 
 ALC260
 ======
@@ -62,6 +64,8 @@ lenovo-dock
     Enables docking station I/O for some Lenovos
 hp-gpio-led
     GPIO LED support on HP laptops
+hp-dock-gpio-mic1-led
+    HP dock with mic LED support
 dell-headset-multi
     Headset jack, which can also be used as mic-in
 dell-headset-dock
@@ -72,6 +76,12 @@ alc283-sense-combo
     Combo jack sensing on ALC283
 tpt440-dock
     Pin configs for Lenovo Thinkpad Dock support
+tpt440
+    Lenovo Thinkpad T440s setup
+tpt460
+    Lenovo Thinkpad T460/560 setup
+dual-codecs
+    Lenovo laptops with dual codecs
 
 ALC66x/67x/892
 ==============
@@ -97,6 +107,8 @@ inv-dmic
     Inverted internal mic workaround
 dell-headset-multi
     Headset jack, which can also be used as mic-in
+dual-codecs
+    Lenovo laptops with dual codecs
 
 ALC680
 ======
@@ -114,6 +126,8 @@ inv-dmic
     Inverted internal mic workaround
 no-primary-hp
     VAIO Z/VGC-LN51JGB workaround (for fixed speaker DAC)
+dual-codecs
+    ALC1220 dual codecs for Gaming mobos
 
 ALC861/660
 ==========
@@ -206,65 +220,47 @@ auto
 
 Conexant 5045
 =============
-laptop-hpsense
-    Laptop with HP sense (old model laptop)
-laptop-micsense
-    Laptop with Mic sense (old model fujitsu)
-laptop-hpmicsense
-    Laptop with HP and Mic senses
-benq
-    Benq R55E
-laptop-hp530
-    HP 530 laptop
-test
-    for testing/debugging purpose, almost all controls can be
-    adjusted.  Appearing only when compiled with $CONFIG_SND_DEBUG=y
+cap-mix-amp
+    Fix max input level on mixer widget
+toshiba-p105
+    Toshiba P105 quirk
+hp-530
+    HP 530 quirk
 
 Conexant 5047
 =============
-laptop
-    Basic Laptop config 
-laptop-hp
-    Laptop config for some HP models (subdevice 30A5)
-laptop-eapd
-    Laptop config with EAPD support
-test
-    for testing/debugging purpose, almost all controls can be
-    adjusted.  Appearing only when compiled with $CONFIG_SND_DEBUG=y
+cap-mix-amp
+    Fix max input level on mixer widget
 
 Conexant 5051
 =============
-laptop
-    Basic Laptop config (default)
-hp
-    HP Spartan laptop
-hp-dv6736
-    HP dv6736
-hp-f700
-    HP Compaq Presario F700
-ideapad
-    Lenovo IdeaPad laptop
-toshiba
-    Toshiba Satellite M300
+lenovo-x200
+    Lenovo X200 quirk
 
 Conexant 5066
 =============
-laptop
-    Basic Laptop config (default)
-hp-laptop
-    HP laptops, e g G60
-asus
-    Asus K52JU, Lenovo G560
-dell-laptop
-    Dell laptops
-dell-vostro
-    Dell Vostro
-olpc-xo-1_5
-    OLPC XO 1.5
-ideapad
-    Lenovo IdeaPad U150
+stereo-dmic
+    Workaround for inverted stereo digital mic
+gpio1
+    Enable GPIO1 pin
+headphone-mic-pin
+    Enable headphone mic NID 0x18 without detection
+tp410
+    Thinkpad T400 & co quirks
 thinkpad
-    Lenovo Thinkpad
+    Thinkpad mute/mic LED quirk
+lemote-a1004
+    Lemote A1004 quirk
+lemote-a1205
+    Lemote A1205 quirk
+olpc-xo
+    OLPC XO quirk
+mute-led-eapd
+    Mute LED control via EAPD
+hp-dock
+    HP dock support
+mute-led-gpio
+    Mute LED control via GPIO
 
 STAC9200
 ========
@@ -444,6 +440,8 @@ dell-eq
     Dell desktops/laptops
 alienware
     Alienware M17x
+asus-mobo
+    Pin configs for ASUS mobo with 5.1/SPDIF out
 auto
     BIOS setup (default)
 
@@ -477,6 +475,8 @@ hp-envy-ts-bass
     Pin fixup for HP Envy TS bass speaker (NID 0x10)
 hp-bnb13-eq
     Hardware equalizer setup for HP laptops
+hp-envy-ts-bass
+    HP Envy TS bass support
 auto
     BIOS setup (default)
 
@@ -496,10 +496,22 @@ auto
 
 Cirrus Logic CS4206/4207
 ========================
+mbp53
+    MacBook Pro 5,3
 mbp55
     MacBook Pro 5,5
 imac27
     IMac 27 Inch
+imac27_122
+    iMac 12,2
+apple
+    Generic Apple quirk
+mbp101
+    MacBookPro 10,1
+mbp81
+    MacBookPro 8,1
+mba42
+    MacBookAir 4,2
 auto
     BIOS setup (default)
 
@@ -509,6 +521,10 @@ mba6
     MacBook Air 6,1 and 6,2
 gpio0
     Enable GPIO 0 amp
+mbp11
+    MacBookPro 11,2
+macmini
+    MacMini 7,1
 auto
     BIOS setup (default)
 

MAINTAINERS

@@ -7143,7 +7143,7 @@ S:	Maintained
 F:	drivers/media/platform/rcar_jpu.c
 
 JSM Neo PCI based serial card
-M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+M:	Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -81,6 +81,45 @@
 		};
 	};
 
+	reg_sys_5v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vdd_3v3: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
+	};
+
+	reg_5v_hub: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio0 7 0>;
+		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
+	};
+
+	wl1835_pwrseq: wl1835-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/* WLAN_EN GPIO */
+		reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+		power-off-delay-us = <10>;
+	};
+
 	soc {
 		spi0: spi@f7106000 {
 			status = "ok";
@@ -256,11 +295,31 @@
 
 		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
 
+		dwmmc_0: dwmmc0@f723d000 {
+			cap-mmc-highspeed;
+			non-removable;
+			bus-width = <0x8>;
+			vmmc-supply = <&ldo19>;
+		};
+
+		dwmmc_1: dwmmc1@f723e000 {
+			card-detect-delay = <200>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			vqmmc-supply = <&ldo7>;
+			vmmc-supply = <&ldo10>;
+			bus-width = <0x4>;
+			disable-wp;
+			cd-gpios = <&gpio1 0 1>;
+		};
+
 		dwmmc_2: dwmmc2@f723f000 {
-			ti,non-removable;
+			bus-width = <0x4>;
 			non-removable;
-			/* WL_EN */
-			vmmc-supply = <&wlan_en_reg>;
+			vmmc-supply = <&reg_vdd_3v3>;
+			mmc-pwrseq = <&wl1835_pwrseq>;
 
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
@@ -272,18 +331,6 @@
 				interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 			};
 		};
-
-		wlan_en_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "wlan-en-regulator";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			/* WLAN_EN GPIO */
-			gpio = <&gpio0 5 0>;
-			/* WLAN card specific delay */
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
 	};
 
 	leds {
@@ -330,6 +377,7 @@
 	pmic: pmic@f8000000 {
 		compatible = "hisilicon,hi655x-pmic";
 		reg = <0x0 0xf8000000 0x0 0x1000>;
+		#clock-cells = <0>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/hisilicon/hi6220.dtsi

@@ -725,20 +725,10 @@
 			status = "disabled";
 		};
 
-		fixed_5v_hub: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "fixed_5v_hub";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			gpio = <&gpio0 7 0>;
-			regulator-always-on;
-		};
-
 		usb_phy: usbphy {
 			compatible = "hisilicon,hi6220-usb-phy";
 			#phy-cells = <0>;
-			phy-supply = <&fixed_5v_hub>;
+			phy-supply = <&reg_5v_hub>;
 			hisilicon,peripheral-syscon = <&sys_ctrl>;
 		};
 
@@ -766,17 +756,12 @@
 
 		dwmmc_0: dwmmc0@f723d000 {
 			compatible = "hisilicon,hi6220-dw-mshc";
-			num-slots = <0x1>;
-			cap-mmc-highspeed;
-			non-removable;
 			reg = <0x0 0xf723d000 0x0 0x1000>;
 			interrupts = <0x0 0x48 0x4>;
 			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
 			reset-names = "reset";
-			bus-width = <0x8>;
-			vmmc-supply = <&ldo19>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
 				     &emmc_cfg_func &emmc_rst_cfg_func>;
@@ -784,13 +769,7 @@
 
 		dwmmc_1: dwmmc1@f723e000 {
 			compatible = "hisilicon,hi6220-dw-mshc";
-			num-slots = <0x1>;
-			card-detect-delay = <200>;
 			hisilicon,peripheral-syscon = <&ao_ctrl>;
-			cap-sd-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
 			reg = <0x0 0xf723e000 0x0 0x1000>;
 			interrupts = <0x0 0x49 0x4>;
 			#address-cells = <0x1>;
@@ -799,11 +778,6 @@
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
 			reset-names = "reset";
-			vqmmc-supply = <&ldo7>;
-			vmmc-supply = <&ldo10>;
-			bus-width = <0x4>;
-			disable-wp;
-			cd-gpios = <&gpio1 0 1>;
 			pinctrl-names = "default", "idle";
 			pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
 			pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
@@ -811,15 +785,12 @@
 
 		dwmmc_2: dwmmc2@f723f000 {
 			compatible = "hisilicon,hi6220-dw-mshc";
-			num-slots = <0x1>;
 			reg = <0x0 0xf723f000 0x0 0x1000>;
 			interrupts = <0x0 0x4a 0x4>;
 			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
 			reset-names = "reset";
-			bus-width = <0x4>;
-			broken-cd;
 			pinctrl-names = "default", "idle";
 			pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
 			pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;

arch/powerpc/include/uapi/asm/cputable.h

@@ -46,6 +46,8 @@
 #define PPC_FEATURE2_HTM_NOSC		0x01000000
 #define PPC_FEATURE2_ARCH_3_00		0x00800000 /* ISA 3.00 */
 #define PPC_FEATURE2_HAS_IEEE128	0x00400000 /* VSX IEEE Binary Float 128-bit */
+#define PPC_FEATURE2_DARN		0x00200000 /* darn random number insn */
+#define PPC_FEATURE2_SCV		0x00100000 /* scv syscall */
 
 /*
  * IMPORTANT!

arch/powerpc/kernel/cputable.c

@@ -124,7 +124,8 @@ extern void __restore_cpu_e6500(void);
 #define COMMON_USER_POWER9	COMMON_USER_POWER8
 #define COMMON_USER2_POWER9	(COMMON_USER2_POWER8 | \
 				 PPC_FEATURE2_ARCH_3_00 | \
-				 PPC_FEATURE2_HAS_IEEE128)
+				 PPC_FEATURE2_HAS_IEEE128 | \
+				 PPC_FEATURE2_DARN )
 
 #ifdef CONFIG_PPC_BOOK3E_64
 #define COMMON_USER_BOOKE	(COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)

arch/powerpc/kernel/prom.c

@@ -161,7 +161,9 @@ static struct ibm_pa_feature {
 	{ .pabyte = 0,  .pabit = 3, .cpu_features  = CPU_FTR_CTRL },
 	{ .pabyte = 0,  .pabit = 6, .cpu_features  = CPU_FTR_NOEXECUTE },
 	{ .pabyte = 1,  .pabit = 2, .mmu_features  = MMU_FTR_CI_LARGE_PAGE },
+#ifdef CONFIG_PPC_RADIX_MMU
 	{ .pabyte = 40, .pabit = 0, .mmu_features  = MMU_FTR_TYPE_RADIX },
+#endif
 	{ .pabyte = 1,  .pabit = 1, .invert = 1, .cpu_features = CPU_FTR_NODSISRALIGN },
 	{ .pabyte = 5,  .pabit = 0, .cpu_features  = CPU_FTR_REAL_LE,
 				    .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },

arch/powerpc/platforms/cell/spu_base.c

@@ -197,7 +197,9 @@ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 	    (REGION_ID(ea) != USER_REGION_ID)) {
 
 		spin_unlock(&spu->register_lock);
-		ret = hash_page(ea, _PAGE_PRESENT | _PAGE_READ, 0x300, dsisr);
+		ret = hash_page(ea,
+				_PAGE_PRESENT | _PAGE_READ | _PAGE_PRIVILEGED,
+				0x300, dsisr);
 		spin_lock(&spu->register_lock);
 
 		if (!ret) {

arch/powerpc/platforms/powernv/npu-dma.c

@@ -714,7 +714,7 @@ static void pnv_npu2_release_context(struct kref *kref)
 void pnv_npu2_destroy_context(struct npu_context *npu_context,
 			struct pci_dev *gpdev)
 {
-	struct pnv_phb *nphb, *phb;
+	struct pnv_phb *nphb;
 	struct npu *npu;
 	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
 	struct device_node *nvlink_dn;
@@ -728,13 +728,12 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context,
 
 	nphb = pci_bus_to_host(npdev->bus)->private_data;
 	npu = &nphb->npu;
-	phb = pci_bus_to_host(gpdev->bus)->private_data;
 	nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
 	if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
 							&nvlink_index)))
 		return;
 	npu_context->npdev[npu->index][nvlink_index] = NULL;
-	opal_npu_destroy_context(phb->opal_id, npu_context->mm->context.id,
+	opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
 				PCI_DEVID(gpdev->bus->number, gpdev->devfn));
 	kref_put(&npu_context->kref, pnv_npu2_release_context);
 }

arch/x86/Kconfig

@@ -360,7 +360,7 @@ config SMP
 	  Management" code will be disabled if you say Y here.
 
 	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+	  <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.

arch/x86/Makefile

@@ -159,7 +159,7 @@ ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	# If '-Os' is enabled, disable it and print a warning.
         ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
           undefine CONFIG_CC_OPTIMIZE_FOR_SIZE
-	  $(warning Disabling CONFIG_CC_OPTIMIZE_FOR_SIZE.  Your compiler does not have -mfentry so you cannot optimize for size with CONFIG_FUNCTION_GRAPH_TRACER.)
+          $(warning Disabling CONFIG_CC_OPTIMIZE_FOR_SIZE.  Your compiler does not have -mfentry so you cannot optimize for size with CONFIG_FUNCTION_GRAPH_TRACER.)
         endif
 
     endif

arch/x86/boot/compressed/Makefile

@@ -94,7 +94,7 @@ vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o
 quiet_cmd_check_data_rel = DATAREL $@
 define cmd_check_data_rel
 	for obj in $(filter %.o,$^); do \
-		readelf -S $$obj | grep -qF .rel.local && { \
+		${CROSS_COMPILE}readelf -S $$obj | grep -qF .rel.local && { \
 			echo "error: $$obj has data relocations!" >&2; \
 			exit 1; \
 		} || true; \

arch/x86/entry/entry_32.S

@@ -251,6 +251,23 @@ ENTRY(__switch_to_asm)
 	jmp	__switch_to
 END(__switch_to_asm)
 
+/*
+ * The unwinder expects the last frame on the stack to always be at the same
+ * offset from the end of the page, which allows it to validate the stack.
+ * Calling schedule_tail() directly would break that convention because its an
+ * asmlinkage function so its argument has to be pushed on the stack.  This
+ * wrapper creates a proper "end of stack" frame header before the call.
+ */
+ENTRY(schedule_tail_wrapper)
+	FRAME_BEGIN
+
+	pushl	%eax
+	call	schedule_tail
+	popl	%eax
+
+	FRAME_END
+	ret
+ENDPROC(schedule_tail_wrapper)
 /*
  * A newly forked process directly context switches into this address.
  *
@@ -259,24 +276,15 @@ END(__switch_to_asm)
  * edi: kernel thread arg
  */
 ENTRY(ret_from_fork)
-	FRAME_BEGIN		/* help unwinder find end of stack */
-
-	/*
-	 * schedule_tail() is asmlinkage so we have to put its 'prev' argument
-	 * on the stack.
-	 */
-	pushl	%eax
-	call	schedule_tail
-	popl	%eax
+	call	schedule_tail_wrapper
 
 	testl	%ebx, %ebx
 	jnz	1f		/* kernel threads are uncommon */
 
 2:
 	/* When we fork, we trace the syscall return in the child, too. */
-	leal	FRAME_OFFSET(%esp), %eax
+	movl    %esp, %eax
 	call    syscall_return_slowpath
-	FRAME_END
 	jmp     restore_all
 
 	/* kernel thread */

arch/x86/entry/entry_64.S

@@ -36,7 +36,6 @@
 #include <asm/smap.h>
 #include <asm/pgtable_types.h>
 #include <asm/export.h>
-#include <asm/frame.h>
 #include <linux/err.h>
 
 .code64
@@ -406,19 +405,17 @@ END(__switch_to_asm)
  * r12: kernel thread arg
  */
 ENTRY(ret_from_fork)
-	FRAME_BEGIN			/* help unwinder find end of stack */
 	movq	%rax, %rdi
-	call	schedule_tail		/* rdi: 'prev' task parameter */
+	call	schedule_tail			/* rdi: 'prev' task parameter */
 
-	testq	%rbx, %rbx		/* from kernel_thread? */
-	jnz	1f			/* kernel threads are uncommon */
+	testq	%rbx, %rbx			/* from kernel_thread? */
+	jnz	1f				/* kernel threads are uncommon */
 
 2:
-	leaq	FRAME_OFFSET(%rsp),%rdi	/* pt_regs pointer */
+	movq	%rsp, %rdi
 	call	syscall_return_slowpath	/* returns with IRQs disabled */
 	TRACE_IRQS_ON			/* user mode is traced as IRQS on */
 	SWAPGS
-	FRAME_END
 	jmp	restore_regs_and_iret
 
 1:

arch/x86/include/asm/mce.h

@@ -266,6 +266,7 @@ static inline int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *s
 #endif
 
 int mce_available(struct cpuinfo_x86 *c);
+bool mce_is_memory_error(struct mce *m);
 
 DECLARE_PER_CPU(unsigned, mce_exception_count);
 DECLARE_PER_CPU(unsigned, mce_poll_count);

arch/x86/kernel/alternative.c

@@ -409,8 +409,13 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start,
 		memcpy(insnbuf, replacement, a->replacementlen);
 		insnbuf_sz = a->replacementlen;
 
-		/* 0xe8 is a relative jump; fix the offset. */
-		if (*insnbuf == 0xe8 && a->replacementlen == 5) {
+		/*
+		 * 0xe8 is a relative jump; fix the offset.
+		 *
+		 * Instruction length is checked before the opcode to avoid
+		 * accessing uninitialized bytes for zero-length replacements.
+		 */
+		if (a->replacementlen == 5 && *insnbuf == 0xe8) {
 			*(s32 *)(insnbuf + 1) += replacement - instr;
 			DPRINTK("Fix CALL offset: 0x%x, CALL 0x%lx",
 				*(s32 *)(insnbuf + 1),

arch/x86/kernel/cpu/mcheck/mce.c

@@ -499,16 +499,14 @@ static int mce_usable_address(struct mce *m)
 	return 1;
 }
 
-static bool memory_error(struct mce *m)
+bool mce_is_memory_error(struct mce *m)
 {
-	struct cpuinfo_x86 *c = &boot_cpu_data;
-
-	if (c->x86_vendor == X86_VENDOR_AMD) {
+	if (m->cpuvendor == X86_VENDOR_AMD) {
 		/* ErrCodeExt[20:16] */
 		u8 xec = (m->status >> 16) & 0x1f;
 
 		return (xec == 0x0 || xec == 0x8);
-	} else if (c->x86_vendor == X86_VENDOR_INTEL) {
+	} else if (m->cpuvendor == X86_VENDOR_INTEL) {
 		/*
 		 * Intel SDM Volume 3B - 15.9.2 Compound Error Codes
 		 *
@@ -529,6 +527,7 @@ static bool memory_error(struct mce *m)
 
 	return false;
 }
+EXPORT_SYMBOL_GPL(mce_is_memory_error);
 
 static bool cec_add_mce(struct mce *m)
 {
@@ -536,7 +535,7 @@ static bool cec_add_mce(struct mce *m)
 		return false;
 
 	/* We eat only correctable DRAM errors with usable addresses. */
-	if (memory_error(m) &&
+	if (mce_is_memory_error(m) &&
 	    !(m->status & MCI_STATUS_UC) &&
 	    mce_usable_address(m))
 		if (!cec_add_elem(m->addr >> PAGE_SHIFT))
@@ -713,7 +712,7 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 
 		severity = mce_severity(&m, mca_cfg.tolerant, NULL, false);
 
-		if (severity == MCE_DEFERRED_SEVERITY && memory_error(&m))
+		if (severity == MCE_DEFERRED_SEVERITY && mce_is_memory_error(&m))
 			if (m.status & MCI_STATUS_ADDRV)
 				m.severity = severity;
 

arch/x86/kernel/ftrace.c

@@ -689,8 +689,12 @@ static inline void *alloc_tramp(unsigned long size)
 {
 	return module_alloc(size);
 }
-static inline void tramp_free(void *tramp)
+static inline void tramp_free(void *tramp, int size)
 {
+	int npages = PAGE_ALIGN(size) >> PAGE_SHIFT;
+
+	set_memory_nx((unsigned long)tramp, npages);
+	set_memory_rw((unsigned long)tramp, npages);
 	module_memfree(tramp);
 }
 #else
@@ -699,7 +703,7 @@ static inline void *alloc_tramp(unsigned long size)
 {
 	return NULL;
 }
-static inline void tramp_free(void *tramp) { }
+static inline void tramp_free(void *tramp, int size) { }
 #endif
 
 /* Defined as markers to the end of the ftrace default trampolines */
@@ -771,7 +775,7 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 	/* Copy ftrace_caller onto the trampoline memory */
 	ret = probe_kernel_read(trampoline, (void *)start_offset, size);
 	if (WARN_ON(ret < 0)) {
-		tramp_free(trampoline);
+		tramp_free(trampoline, *tramp_size);
 		return 0;
 	}
 
@@ -797,7 +801,7 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 
 	/* Are we pointing to the reference? */
 	if (WARN_ON(memcmp(op_ptr.op, op_ref, 3) != 0)) {
-		tramp_free(trampoline);
+		tramp_free(trampoline, *tramp_size);
 		return 0;
 	}
 
@@ -839,7 +843,7 @@ void arch_ftrace_update_trampoline(struct ftrace_ops *ops)
 	unsigned long offset;
 	unsigned long ip;
 	unsigned int size;
-	int ret;
+	int ret, npages;
 
 	if (ops->trampoline) {
 		/*
@@ -848,11 +852,14 @@ void arch_ftrace_update_trampoline(struct ftrace_ops *ops)
 		 */
 		if (!(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
 			return;
+		npages = PAGE_ALIGN(ops->trampoline_size) >> PAGE_SHIFT;
+		set_memory_rw(ops->trampoline, npages);
 	} else {
 		ops->trampoline = create_trampoline(ops, &size);
 		if (!ops->trampoline)
 			return;
 		ops->trampoline_size = size;
+		npages = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	}
 
 	offset = calc_trampoline_call_offset(ops->flags & FTRACE_OPS_FL_SAVE_REGS);
@@ -863,6 +870,7 @@ void arch_ftrace_update_trampoline(struct ftrace_ops *ops)
 	/* Do a safe modify in case the trampoline is executing */
 	new = ftrace_call_replace(ip, (unsigned long)func);
 	ret = update_ftrace_func(ip, new);
+	set_memory_ro(ops->trampoline, npages);
 
 	/* The update should never fail */
 	WARN_ON(ret);
@@ -939,7 +947,7 @@ void arch_ftrace_trampoline_free(struct ftrace_ops *ops)
 	if (!ops || !(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
 		return;
 
-	tramp_free((void *)ops->trampoline);
+	tramp_free((void *)ops->trampoline, ops->trampoline_size);
 	ops->trampoline = 0;
 }
 

arch/x86/kernel/kprobes/core.c

@@ -52,6 +52,7 @@
 #include <linux/ftrace.h>
 #include <linux/frame.h>
 #include <linux/kasan.h>
+#include <linux/moduleloader.h>
 
 #include <asm/text-patching.h>
 #include <asm/cacheflush.h>
@@ -417,6 +418,14 @@ static void prepare_boost(struct kprobe *p, struct insn *insn)
 	}
 }
 
+/* Recover page to RW mode before releasing it */
+void free_insn_page(void *page)
+{
+	set_memory_nx((unsigned long)page & PAGE_MASK, 1);
+	set_memory_rw((unsigned long)page & PAGE_MASK, 1);
+	module_memfree(page);
+}
+
 static int arch_copy_kprobe(struct kprobe *p)
 {
 	struct insn insn;

arch/x86/kernel/setup.c

@@ -980,8 +980,6 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	x86_configure_nx();
 
-	simple_udelay_calibration();
-
 	parse_early_param();
 
 #ifdef CONFIG_MEMORY_HOTPLUG
@@ -1041,6 +1039,8 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	init_hypervisor_platform();
 
+	simple_udelay_calibration();
+
 	x86_init.resources.probe_roms();
 
 	/* after parse_early_param, so could debug it */

arch/x86/kernel/unwind_frame.c

@@ -104,6 +104,11 @@ static inline unsigned long *last_frame(struct unwind_state *state)
 	return (unsigned long *)task_pt_regs(state->task) - 2;
 }
 
+static bool is_last_frame(struct unwind_state *state)
+{
+	return state->bp == last_frame(state);
+}
+
 #ifdef CONFIG_X86_32
 #define GCC_REALIGN_WORDS 3
 #else
@@ -115,16 +120,15 @@ static inline unsigned long *last_aligned_frame(struct unwind_state *state)
 	return last_frame(state) - GCC_REALIGN_WORDS;
 }
 
-static bool is_last_task_frame(struct unwind_state *state)
+static bool is_last_aligned_frame(struct unwind_state *state)
 {
 	unsigned long *last_bp = last_frame(state);
 	unsigned long *aligned_bp = last_aligned_frame(state);
 
 	/*
-	 * We have to check for the last task frame at two different locations
-	 * because gcc can occasionally decide to realign the stack pointer and
-	 * change the offset of the stack frame in the prologue of a function
-	 * called by head/entry code.  Examples:
+	 * GCC can occasionally decide to realign the stack pointer and change
+	 * the offset of the stack frame in the prologue of a function called
+	 * by head/entry code.  Examples:
 	 *
 	 * <start_secondary>:
 	 *      push   %edi
@@ -141,11 +145,38 @@ static bool is_last_task_frame(struct unwind_state *state)
 	 *      push   %rbp
 	 *      mov    %rsp,%rbp
 	 *
-	 * Note that after aligning the stack, it pushes a duplicate copy of
-	 * the return address before pushing the frame pointer.
+	 * After aligning the stack, it pushes a duplicate copy of the return
+	 * address before pushing the frame pointer.
+	 */
+	return (state->bp == aligned_bp && *(aligned_bp + 1) == *(last_bp + 1));
+}
+
+static bool is_last_ftrace_frame(struct unwind_state *state)
+{
+	unsigned long *last_bp = last_frame(state);
+	unsigned long *last_ftrace_bp = last_bp - 3;
+
+	/*
+	 * When unwinding from an ftrace handler of a function called by entry
+	 * code, the stack layout of the last frame is:
+	 *
+	 *   bp
+	 *   parent ret addr
+	 *   bp
+	 *   function ret addr
+	 *   parent ret addr
+	 *   pt_regs
+	 *   -----------------
 	 */
-	return (state->bp == last_bp ||
-		(state->bp == aligned_bp && *(aligned_bp+1) == *(last_bp+1)));
+	return (state->bp == last_ftrace_bp &&
+		*state->bp == *(state->bp + 2) &&
+		*(state->bp + 1) == *(state->bp + 4));
+}
+
+static bool is_last_task_frame(struct unwind_state *state)
+{
+	return is_last_frame(state) || is_last_aligned_frame(state) ||
+	       is_last_ftrace_frame(state);
 }
 
 /*

arch/x86/mm/pageattr.c

@@ -186,7 +186,7 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache)
 	unsigned int i, level;
 	unsigned long addr;
 
-	BUG_ON(irqs_disabled());
+	BUG_ON(irqs_disabled() && !early_boot_irqs_disabled);
 	WARN_ON(PAGE_ALIGN(start) != start);
 
 	on_each_cpu(__cpa_flush_range, NULL, 1);

arch/x86/mm/pat.c

@@ -65,9 +65,11 @@ static int __init nopat(char *str)
 }
 early_param("nopat", nopat);
 
+static bool __read_mostly __pat_initialized = false;
+
 bool pat_enabled(void)
 {
-	return !!__pat_enabled;
+	return __pat_initialized;
 }
 EXPORT_SYMBOL_GPL(pat_enabled);
 
@@ -225,13 +227,14 @@ static void pat_bsp_init(u64 pat)
 	}
 
 	wrmsrl(MSR_IA32_CR_PAT, pat);
+	__pat_initialized = true;
 
 	__init_cache_modes(pat);
 }
 
 static void pat_ap_init(u64 pat)
 {
-	if (!boot_cpu_has(X86_FEATURE_PAT)) {
+	if (!this_cpu_has(X86_FEATURE_PAT)) {
 		/*
 		 * If this happens we are on a secondary CPU, but switched to
 		 * PAT on the boot CPU. We have no way to undo PAT.
@@ -306,7 +309,7 @@ void pat_init(void)
 	u64 pat;
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
-	if (!pat_enabled()) {
+	if (!__pat_enabled) {
 		init_cache_modes();
 		return;
 	}

block/blk-mq.c

@@ -628,25 +628,6 @@ void blk_mq_delay_kick_requeue_list(struct request_queue *q,
 }
 EXPORT_SYMBOL(blk_mq_delay_kick_requeue_list);
 
-void blk_mq_abort_requeue_list(struct request_queue *q)
-{
-	unsigned long flags;
-	LIST_HEAD(rq_list);
-
-	spin_lock_irqsave(&q->requeue_lock, flags);
-	list_splice_init(&q->requeue_list, &rq_list);
-	spin_unlock_irqrestore(&q->requeue_lock, flags);
-
-	while (!list_empty(&rq_list)) {
-		struct request *rq;
-
-		rq = list_first_entry(&rq_list, struct request, queuelist);
-		list_del_init(&rq->queuelist);
-		blk_mq_end_request(rq, -EIO);
-	}
-}
-EXPORT_SYMBOL(blk_mq_abort_requeue_list);
-
 struct request *blk_mq_tag_to_rq(struct blk_mq_tags *tags, unsigned int tag)
 {
 	if (tag < tags->nr_tags) {

block/blk-sysfs.c

@@ -887,10 +887,10 @@ int blk_register_queue(struct gendisk *disk)
 		goto unlock;
 	}
 
-	if (q->mq_ops)
+	if (q->mq_ops) {
 		__blk_mq_register_dev(dev, q);
-
-	blk_mq_debugfs_register(q);
+		blk_mq_debugfs_register(q);
+	}
 
 	kobject_uevent(&q->kobj, KOBJ_ADD);
 

block/blk-throttle.c

@@ -22,11 +22,11 @@ static int throtl_quantum = 32;
 #define DFL_THROTL_SLICE_HD (HZ / 10)
 #define DFL_THROTL_SLICE_SSD (HZ / 50)
 #define MAX_THROTL_SLICE (HZ)
-#define DFL_IDLE_THRESHOLD_SSD (1000L) /* 1 ms */
-#define DFL_IDLE_THRESHOLD_HD (100L * 1000) /* 100 ms */
 #define MAX_IDLE_TIME (5L * 1000 * 1000) /* 5 s */
-/* default latency target is 0, eg, guarantee IO latency by default */
-#define DFL_LATENCY_TARGET (0)
+#define MIN_THROTL_BPS (320 * 1024)
+#define MIN_THROTL_IOPS (10)
+#define DFL_LATENCY_TARGET (-1L)
+#define DFL_IDLE_THRESHOLD (0)
 
 #define SKIP_LATENCY (((u64)1) << BLK_STAT_RES_SHIFT)
 
@@ -157,6 +157,7 @@ struct throtl_grp {
 	unsigned long last_check_time;
 
 	unsigned long latency_target; /* us */
+	unsigned long latency_target_conf; /* us */
 	/* When did we start a new slice */
 	unsigned long slice_start[2];
 	unsigned long slice_end[2];
@@ -165,6 +166,7 @@ struct throtl_grp {
 	unsigned long checked_last_finish_time; /* ns / 1024 */
 	unsigned long avg_idletime; /* ns / 1024 */
 	unsigned long idletime_threshold; /* us */
+	unsigned long idletime_threshold_conf; /* us */
 
 	unsigned int bio_cnt; /* total bios */
 	unsigned int bad_bio_cnt; /* bios exceeding latency threshold */
@@ -201,8 +203,6 @@ struct throtl_data
 	unsigned int limit_index;
 	bool limit_valid[LIMIT_CNT];
 
-	unsigned long dft_idletime_threshold; /* us */
-
 	unsigned long low_upgrade_time;
 	unsigned long low_downgrade_time;
 
@@ -294,8 +294,14 @@ static uint64_t tg_bps_limit(struct throtl_grp *tg, int rw)
 
 	td = tg->td;
 	ret = tg->bps[rw][td->limit_index];
-	if (ret == 0 && td->limit_index == LIMIT_LOW)
-		return tg->bps[rw][LIMIT_MAX];
+	if (ret == 0 && td->limit_index == LIMIT_LOW) {
+		/* intermediate node or iops isn't 0 */
+		if (!list_empty(&blkg->blkcg->css.children) ||
+		    tg->iops[rw][td->limit_index])
+			return U64_MAX;
+		else
+			return MIN_THROTL_BPS;
+	}
 
 	if (td->limit_index == LIMIT_MAX && tg->bps[rw][LIMIT_LOW] &&
 	    tg->bps[rw][LIMIT_LOW] != tg->bps[rw][LIMIT_MAX]) {
@@ -315,10 +321,17 @@ static unsigned int tg_iops_limit(struct throtl_grp *tg, int rw)
 
 	if (cgroup_subsys_on_dfl(io_cgrp_subsys) && !blkg->parent)
 		return UINT_MAX;
+
 	td = tg->td;
 	ret = tg->iops[rw][td->limit_index];
-	if (ret == 0 && tg->td->limit_index == LIMIT_LOW)
-		return tg->iops[rw][LIMIT_MAX];
+	if (ret == 0 && tg->td->limit_index == LIMIT_LOW) {
+		/* intermediate node or bps isn't 0 */
+		if (!list_empty(&blkg->blkcg->css.children) ||
+		    tg->bps[rw][td->limit_index])
+			return UINT_MAX;
+		else
+			return MIN_THROTL_IOPS;
+	}
 
 	if (td->limit_index == LIMIT_MAX && tg->iops[rw][LIMIT_LOW] &&
 	    tg->iops[rw][LIMIT_LOW] != tg->iops[rw][LIMIT_MAX]) {
@@ -482,6 +495,9 @@ static struct blkg_policy_data *throtl_pd_alloc(gfp_t gfp, int node)
 	/* LIMIT_LOW will have default value 0 */
 
 	tg->latency_target = DFL_LATENCY_TARGET;
+	tg->latency_target_conf = DFL_LATENCY_TARGET;
+	tg->idletime_threshold = DFL_IDLE_THRESHOLD;
+	tg->idletime_threshold_conf = DFL_IDLE_THRESHOLD;
 
 	return &tg->pd;
 }
@@ -510,8 +526,6 @@ static void throtl_pd_init(struct blkg_policy_data *pd)
 	if (cgroup_subsys_on_dfl(io_cgrp_subsys) && blkg->parent)
 		sq->parent_sq = &blkg_to_tg(blkg->parent)->service_queue;
 	tg->td = td;
-
-	tg->idletime_threshold = td->dft_idletime_threshold;
 }
 
 /*
@@ -1349,7 +1363,7 @@ static int tg_print_conf_uint(struct seq_file *sf, void *v)
 	return 0;
 }
 
-static void tg_conf_updated(struct throtl_grp *tg)
+static void tg_conf_updated(struct throtl_grp *tg, bool global)
 {
 	struct throtl_service_queue *sq = &tg->service_queue;
 	struct cgroup_subsys_state *pos_css;
@@ -1367,8 +1381,26 @@ static void tg_conf_updated(struct throtl_grp *tg)
 	 * restrictions in the whole hierarchy and allows them to bypass
 	 * blk-throttle.
 	 */
-	blkg_for_each_descendant_pre(blkg, pos_css, tg_to_blkg(tg))
-		tg_update_has_rules(blkg_to_tg(blkg));
+	blkg_for_each_descendant_pre(blkg, pos_css,
+			global ? tg->td->queue->root_blkg : tg_to_blkg(tg)) {
+		struct throtl_grp *this_tg = blkg_to_tg(blkg);
+		struct throtl_grp *parent_tg;
+
+		tg_update_has_rules(this_tg);
+		/* ignore root/second level */
+		if (!cgroup_subsys_on_dfl(io_cgrp_subsys) || !blkg->parent ||
+		    !blkg->parent->parent)
+			continue;
+		parent_tg = blkg_to_tg(blkg->parent);
+		/*
+		 * make sure all children has lower idle time threshold and
+		 * higher latency target
+		 */
+		this_tg->idletime_threshold = min(this_tg->idletime_threshold,
+				parent_tg->idletime_threshold);
+		this_tg->latency_target = max(this_tg->latency_target,
+				parent_tg->latency_target);
+	}
 
 	/*
 	 * We're already holding queue_lock and know @tg is valid.  Let's
@@ -1413,7 +1445,7 @@ static ssize_t tg_set_conf(struct kernfs_open_file *of,
 	else
 		*(unsigned int *)((void *)tg + of_cft(of)->private) = v;
 
-	tg_conf_updated(tg);
+	tg_conf_updated(tg, false);
 	ret = 0;
 out_finish:
 	blkg_conf_finish(&ctx);
@@ -1497,34 +1529,34 @@ static u64 tg_prfill_limit(struct seq_file *sf, struct blkg_policy_data *pd,
 	    tg->iops_conf[READ][off] == iops_dft &&
 	    tg->iops_conf[WRITE][off] == iops_dft &&
 	    (off != LIMIT_LOW ||
-	     (tg->idletime_threshold == tg->td->dft_idletime_threshold &&
-	      tg->latency_target == DFL_LATENCY_TARGET)))
+	     (tg->idletime_threshold_conf == DFL_IDLE_THRESHOLD &&
+	      tg->latency_target_conf == DFL_LATENCY_TARGET)))
 		return 0;
 
-	if (tg->bps_conf[READ][off] != bps_dft)
+	if (tg->bps_conf[READ][off] != U64_MAX)
 		snprintf(bufs[0], sizeof(bufs[0]), "%llu",
 			tg->bps_conf[READ][off]);
-	if (tg->bps_conf[WRITE][off] != bps_dft)
+	if (tg->bps_conf[WRITE][off] != U64_MAX)
 		snprintf(bufs[1], sizeof(bufs[1]), "%llu",
 			tg->bps_conf[WRITE][off]);
-	if (tg->iops_conf[READ][off] != iops_dft)
+	if (tg->iops_conf[READ][off] != UINT_MAX)
 		snprintf(bufs[2], sizeof(bufs[2]), "%u",
 			tg->iops_conf[READ][off]);
-	if (tg->iops_conf[WRITE][off] != iops_dft)
+	if (tg->iops_conf[WRITE][off] != UINT_MAX)
 		snprintf(bufs[3], sizeof(bufs[3]), "%u",
 			tg->iops_conf[WRITE][off]);
 	if (off == LIMIT_LOW) {
-		if (tg->idletime_threshold == ULONG_MAX)
+		if (tg->idletime_threshold_conf == ULONG_MAX)
 			strcpy(idle_time, " idle=max");
 		else
 			snprintf(idle_time, sizeof(idle_time), " idle=%lu",
-				tg->idletime_threshold);
+				tg->idletime_threshold_conf);
 
-		if (tg->latency_target == ULONG_MAX)
+		if (tg->latency_target_conf == ULONG_MAX)
 			strcpy(latency_time, " latency=max");
 		else
 			snprintf(latency_time, sizeof(latency_time),
-				" latency=%lu", tg->latency_target);
+				" latency=%lu", tg->latency_target_conf);
 	}
 
 	seq_printf(sf, "%s rbps=%s wbps=%s riops=%s wiops=%s%s%s\n",
@@ -1563,8 +1595,8 @@ static ssize_t tg_set_limit(struct kernfs_open_file *of,
 	v[2] = tg->iops_conf[READ][index];
 	v[3] = tg->iops_conf[WRITE][index];
 
-	idle_time = tg->idletime_threshold;
-	latency_time = tg->latency_target;
+	idle_time = tg->idletime_threshold_conf;
+	latency_time = tg->latency_target_conf;
 	while (true) {
 		char tok[27];	/* wiops=18446744073709551616 */
 		char *p;
@@ -1623,17 +1655,33 @@ static ssize_t tg_set_limit(struct kernfs_open_file *of,
 		tg->iops_conf[READ][LIMIT_MAX]);
 	tg->iops[WRITE][LIMIT_LOW] = min(tg->iops_conf[WRITE][LIMIT_LOW],
 		tg->iops_conf[WRITE][LIMIT_MAX]);
+	tg->idletime_threshold_conf = idle_time;
+	tg->latency_target_conf = latency_time;
+
+	/* force user to configure all settings for low limit  */
+	if (!(tg->bps[READ][LIMIT_LOW] || tg->iops[READ][LIMIT_LOW] ||
+	      tg->bps[WRITE][LIMIT_LOW] || tg->iops[WRITE][LIMIT_LOW]) ||
+	    tg->idletime_threshold_conf == DFL_IDLE_THRESHOLD ||
+	    tg->latency_target_conf == DFL_LATENCY_TARGET) {
+		tg->bps[READ][LIMIT_LOW] = 0;
+		tg->bps[WRITE][LIMIT_LOW] = 0;
+		tg->iops[READ][LIMIT_LOW] = 0;
+		tg->iops[WRITE][LIMIT_LOW] = 0;
+		tg->idletime_threshold = DFL_IDLE_THRESHOLD;
+		tg->latency_target = DFL_LATENCY_TARGET;
+	} else if (index == LIMIT_LOW) {
+		tg->idletime_threshold = tg->idletime_threshold_conf;
+		tg->latency_target = tg->latency_target_conf;
+	}
 
-	if (index == LIMIT_LOW) {
-		blk_throtl_update_limit_valid(tg->td);
-		if (tg->td->limit_valid[LIMIT_LOW])
+	blk_throtl_update_limit_valid(tg->td);
+	if (tg->td->limit_valid[LIMIT_LOW]) {
+		if (index == LIMIT_LOW)
 			tg->td->limit_index = LIMIT_LOW;
-		tg->idletime_threshold = (idle_time == ULONG_MAX) ?
-			ULONG_MAX : idle_time;
-		tg->latency_target = (latency_time == ULONG_MAX) ?
-			ULONG_MAX : latency_time;
-	}
-	tg_conf_updated(tg);
+	} else
+		tg->td->limit_index = LIMIT_MAX;
+	tg_conf_updated(tg, index == LIMIT_LOW &&
+		tg->td->limit_valid[LIMIT_LOW]);
 	ret = 0;
 out_finish:
 	blkg_conf_finish(&ctx);
@@ -1722,17 +1770,25 @@ static bool throtl_tg_is_idle(struct throtl_grp *tg)
 	/*
 	 * cgroup is idle if:
 	 * - single idle is too long, longer than a fixed value (in case user
-	 *   configure a too big threshold) or 4 times of slice
+	 *   configure a too big threshold) or 4 times of idletime threshold
 	 * - average think time is more than threshold
 	 * - IO latency is largely below threshold
 	 */
-	unsigned long time = jiffies_to_usecs(4 * tg->td->throtl_slice);
-
-	time = min_t(unsigned long, MAX_IDLE_TIME, time);
-	return (ktime_get_ns() >> 10) - tg->last_finish_time > time ||
-	       tg->avg_idletime > tg->idletime_threshold ||
-	       (tg->latency_target && tg->bio_cnt &&
+	unsigned long time;
+	bool ret;
+
+	time = min_t(unsigned long, MAX_IDLE_TIME, 4 * tg->idletime_threshold);
+	ret = tg->latency_target == DFL_LATENCY_TARGET ||
+	      tg->idletime_threshold == DFL_IDLE_THRESHOLD ||
+	      (ktime_get_ns() >> 10) - tg->last_finish_time > time ||
+	      tg->avg_idletime > tg->idletime_threshold ||
+	      (tg->latency_target && tg->bio_cnt &&
 		tg->bad_bio_cnt * 5 < tg->bio_cnt);
+	throtl_log(&tg->service_queue,
+		"avg_idle=%ld, idle_threshold=%ld, bad_bio=%d, total_bio=%d, is_idle=%d, scale=%d",
+		tg->avg_idletime, tg->idletime_threshold, tg->bad_bio_cnt,
+		tg->bio_cnt, ret, tg->td->scale);
+	return ret;
 }
 
 static bool throtl_tg_can_upgrade(struct throtl_grp *tg)
@@ -1828,6 +1884,7 @@ static void throtl_upgrade_state(struct throtl_data *td)
 	struct cgroup_subsys_state *pos_css;
 	struct blkcg_gq *blkg;
 
+	throtl_log(&td->service_queue, "upgrade to max");
 	td->limit_index = LIMIT_MAX;
 	td->low_upgrade_time = jiffies;
 	td->scale = 0;
@@ -1850,6 +1907,7 @@ static void throtl_downgrade_state(struct throtl_data *td, int new)
 {
 	td->scale /= 2;
 
+	throtl_log(&td->service_queue, "downgrade, scale %d", td->scale);
 	if (td->scale) {
 		td->low_upgrade_time = jiffies - td->scale * td->throtl_slice;
 		return;
@@ -2023,6 +2081,11 @@ static void throtl_update_latency_buckets(struct throtl_data *td)
 		td->avg_buckets[i].valid = true;
 		last_latency = td->avg_buckets[i].latency;
 	}
+
+	for (i = 0; i < LATENCY_BUCKET_SIZE; i++)
+		throtl_log(&td->service_queue,
+			"Latency bucket %d: latency=%ld, valid=%d", i,
+			td->avg_buckets[i].latency, td->avg_buckets[i].valid);
 }
 #else
 static inline void throtl_update_latency_buckets(struct throtl_data *td)
@@ -2354,19 +2417,14 @@ void blk_throtl_exit(struct request_queue *q)
 void blk_throtl_register_queue(struct request_queue *q)
 {
 	struct throtl_data *td;
-	struct cgroup_subsys_state *pos_css;
-	struct blkcg_gq *blkg;
 
 	td = q->td;
 	BUG_ON(!td);
 
-	if (blk_queue_nonrot(q)) {
+	if (blk_queue_nonrot(q))
 		td->throtl_slice = DFL_THROTL_SLICE_SSD;
-		td->dft_idletime_threshold = DFL_IDLE_THRESHOLD_SSD;
-	} else {
+	else
 		td->throtl_slice = DFL_THROTL_SLICE_HD;
-		td->dft_idletime_threshold = DFL_IDLE_THRESHOLD_HD;
-	}
 #ifndef CONFIG_BLK_DEV_THROTTLING_LOW
 	/* if no low limit, use previous default */
 	td->throtl_slice = DFL_THROTL_SLICE_HD;
@@ -2375,18 +2433,6 @@ void blk_throtl_register_queue(struct request_queue *q)
 	td->track_bio_latency = !q->mq_ops && !q->request_fn;
 	if (!td->track_bio_latency)
 		blk_stat_enable_accounting(q);
-
-	/*
-	 * some tg are created before queue is fully initialized, eg, nonrot
-	 * isn't initialized yet
-	 */
-	rcu_read_lock();
-	blkg_for_each_descendant_post(blkg, pos_css, q->root_blkg) {
-		struct throtl_grp *tg = blkg_to_tg(blkg);
-
-		tg->idletime_threshold = td->dft_idletime_threshold;
-	}
-	rcu_read_unlock();
 }
 
 #ifdef CONFIG_BLK_DEV_THROTTLING_LOW

block/partition-generic.c

@@ -320,8 +320,10 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 
 	if (info) {
 		struct partition_meta_info *pinfo = alloc_part_info(disk);
-		if (!pinfo)
+		if (!pinfo) {
+			err = -ENOMEM;
 			goto out_free_stats;
+		}
 		memcpy(pinfo, info, sizeof(*info));
 		p->info = pinfo;
 	}

block/partitions/msdos.c

@@ -300,6 +300,8 @@ static void parse_bsd(struct parsed_partitions *state,
 			continue;
 		bsd_start = le32_to_cpu(p->p_offset);
 		bsd_size = le32_to_cpu(p->p_size);
+		if (memcmp(flavour, "bsd\0", 4) == 0)
+			bsd_start += offset;
 		if (offset == bsd_start && size == bsd_size)
 			/* full parent partition, we have it already */
 			continue;

crypto/skcipher.c

@@ -764,6 +764,44 @@ static int crypto_init_skcipher_ops_ablkcipher(struct crypto_tfm *tfm)
 	return 0;
 }
 
+static int skcipher_setkey_unaligned(struct crypto_skcipher *tfm,
+				     const u8 *key, unsigned int keylen)
+{
+	unsigned long alignmask = crypto_skcipher_alignmask(tfm);
+	struct skcipher_alg *cipher = crypto_skcipher_alg(tfm);
+	u8 *buffer, *alignbuffer;
+	unsigned long absize;
+	int ret;
+
+	absize = keylen + alignmask;
+	buffer = kmalloc(absize, GFP_ATOMIC);
+	if (!buffer)
+		return -ENOMEM;
+
+	alignbuffer = (u8 *)ALIGN((unsigned long)buffer, alignmask + 1);
+	memcpy(alignbuffer, key, keylen);
+	ret = cipher->setkey(tfm, alignbuffer, keylen);
+	kzfree(buffer);
+	return ret;
+}
+
+static int skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key,
+			   unsigned int keylen)
+{
+	struct skcipher_alg *cipher = crypto_skcipher_alg(tfm);
+	unsigned long alignmask = crypto_skcipher_alignmask(tfm);
+
+	if (keylen < cipher->min_keysize || keylen > cipher->max_keysize) {
+		crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+		return -EINVAL;
+	}
+
+	if ((unsigned long)key & alignmask)
+		return skcipher_setkey_unaligned(tfm, key, keylen);
+
+	return cipher->setkey(tfm, key, keylen);
+}
+
 static void crypto_skcipher_exit_tfm(struct crypto_tfm *tfm)
 {
 	struct crypto_skcipher *skcipher = __crypto_skcipher_cast(tfm);
@@ -784,7 +822,7 @@ static int crypto_skcipher_init_tfm(struct crypto_tfm *tfm)
 	    tfm->__crt_alg->cra_type == &crypto_givcipher_type)
 		return crypto_init_skcipher_ops_ablkcipher(tfm);
 
-	skcipher->setkey = alg->setkey;
+	skcipher->setkey = skcipher_setkey;
 	skcipher->encrypt = alg->encrypt;
 	skcipher->decrypt = alg->decrypt;
 	skcipher->ivsize = alg->ivsize;

drivers/acpi/button.c

@@ -57,6 +57,7 @@
 
 #define ACPI_BUTTON_LID_INIT_IGNORE	0x00
 #define ACPI_BUTTON_LID_INIT_OPEN	0x01
+#define ACPI_BUTTON_LID_INIT_METHOD	0x02
 
 #define _COMPONENT		ACPI_BUTTON_COMPONENT
 ACPI_MODULE_NAME("button");
@@ -376,6 +377,9 @@ static void acpi_lid_initialize_state(struct acpi_device *device)
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		(void)acpi_lid_notify_state(device, 1);
 		break;
+	case ACPI_BUTTON_LID_INIT_METHOD:
+		(void)acpi_lid_update_state(device);
+		break;
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 	default:
 		break;
@@ -560,6 +564,9 @@ static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
 	if (!strncmp(val, "open", sizeof("open") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 		pr_info("Notify initial lid state as open\n");
+	} else if (!strncmp(val, "method", sizeof("method") - 1)) {
+		lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+		pr_info("Notify initial lid state with _LID return value\n");
 	} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
 		lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
 		pr_info("Do not notify initial lid state\n");
@@ -573,6 +580,8 @@ static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
 	switch (lid_init_state) {
 	case ACPI_BUTTON_LID_INIT_OPEN:
 		return sprintf(buffer, "open");
+	case ACPI_BUTTON_LID_INIT_METHOD:
+		return sprintf(buffer, "method");
 	case ACPI_BUTTON_LID_INIT_IGNORE:
 		return sprintf(buffer, "ignore");
 	default:

drivers/acpi/nfit/mce.c

@@ -26,7 +26,7 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val,
 	struct nfit_spa *nfit_spa;
 
 	/* We only care about memory errors */
-	if (!(mce->status & MCACOD))
+	if (!mce_is_memory_error(mce))
 		return NOTIFY_DONE;
 
 	/*

drivers/base/power/wakeup.c

@@ -512,13 +512,12 @@ static bool wakeup_source_not_registered(struct wakeup_source *ws)
 /**
  * wakup_source_activate - Mark given wakeup source as active.
  * @ws: Wakeup source to handle.
- * @hard: If set, abort suspends in progress and wake up from suspend-to-idle.
  *
  * Update the @ws' statistics and, if @ws has just been activated, notify the PM
  * core of the event by incrementing the counter of of wakeup events being
  * processed.
  */
-static void wakeup_source_activate(struct wakeup_source *ws, bool hard)
+static void wakeup_source_activate(struct wakeup_source *ws)
 {
 	unsigned int cec;
 
@@ -526,9 +525,6 @@ static void wakeup_source_activate(struct wakeup_source *ws, bool hard)
 			"unregistered wakeup source\n"))
 		return;
 
-	if (hard)
-		pm_system_wakeup();
-
 	ws->active = true;
 	ws->active_count++;
 	ws->last_time = ktime_get();
@@ -554,7 +550,10 @@ static void wakeup_source_report_event(struct wakeup_source *ws, bool hard)
 		ws->wakeup_count++;
 
 	if (!ws->active)
-		wakeup_source_activate(ws, hard);
+		wakeup_source_activate(ws);
+
+	if (hard)
+		pm_system_wakeup();
 }
 
 /**

drivers/cpufreq/Kconfig.arm

@@ -71,6 +71,15 @@ config ARM_HIGHBANK_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_DB8500_CPUFREQ
+	tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500
+	default ARCH_U8500
+	depends on HAS_IOMEM
+	depends on !CPU_THERMAL || THERMAL
+	help
+	  This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC
+	  series.
+
 config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6 cpufreq support"
 	depends on ARCH_MXC

drivers/cpufreq/Makefile

@@ -53,7 +53,7 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
-obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
+obj-$(CONFIG_ARM_DB8500_CPUFREQ)	+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o

drivers/firmware/efi/efi-pstore.c

@@ -53,6 +53,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry,
 	if (sscanf(name, "dump-type%u-%u-%d-%lu-%c",
 		   &record->type, &part, &cnt, &time, &data_type) == 5) {
 		record->id = generic_id(time, part, cnt);
+		record->part = part;
 		record->count = cnt;
 		record->time.tv_sec = time;
 		record->time.tv_nsec = 0;
@@ -64,6 +65,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry,
 	} else if (sscanf(name, "dump-type%u-%u-%d-%lu",
 		   &record->type, &part, &cnt, &time) == 4) {
 		record->id = generic_id(time, part, cnt);
+		record->part = part;
 		record->count = cnt;
 		record->time.tv_sec = time;
 		record->time.tv_nsec = 0;
@@ -77,6 +79,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry,
 		 * multiple logs, remains.
 		 */
 		record->id = generic_id(time, part, 0);
+		record->part = part;
 		record->count = 0;
 		record->time.tv_sec = time;
 		record->time.tv_nsec = 0;
@@ -241,9 +244,15 @@ static int efi_pstore_write(struct pstore_record *record)
 	efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
 	int i, ret = 0;
 
+	record->time.tv_sec = get_seconds();
+	record->time.tv_nsec = 0;
+
+	record->id = generic_id(record->time.tv_sec, record->part,
+				record->count);
+
 	snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu-%c",
 		 record->type, record->part, record->count,
-		 get_seconds(), record->compressed ? 'C' : 'D');
+		 record->time.tv_sec, record->compressed ? 'C' : 'D');
 
 	for (i = 0; i < DUMP_NAME_LEN; i++)
 		efi_name[i] = name[i];
@@ -255,7 +264,6 @@ static int efi_pstore_write(struct pstore_record *record)
 	if (record->reason == KMSG_DUMP_OOPS)
 		efivar_run_worker();
 
-	record->id = record->part;
 	return ret;
 };
 
@@ -287,7 +295,7 @@ static int efi_pstore_erase_func(struct efivar_entry *entry, void *data)
 		 * holding multiple logs, remains.
 		 */
 		snprintf(name_old, sizeof(name_old), "dump-type%u-%u-%lu",
-			ed->record->type, (unsigned int)ed->record->id,
+			ed->record->type, ed->record->part,
 			ed->record->time.tv_sec);
 
 		for (i = 0; i < DUMP_NAME_LEN; i++)
@@ -320,10 +328,7 @@ static int efi_pstore_erase(struct pstore_record *record)
 	char name[DUMP_NAME_LEN];
 	efi_char16_t efi_name[DUMP_NAME_LEN];
 	int found, i;
-	unsigned int part;
 
-	do_div(record->id, 1000);
-	part = do_div(record->id, 100);
 	snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu",
 		 record->type, record->part, record->count,
 		 record->time.tv_sec);

drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c

@@ -425,10 +425,15 @@ bool amdgpu_fbdev_robj_is_fb(struct amdgpu_device *adev, struct amdgpu_bo *robj)
 
 void amdgpu_fbdev_restore_mode(struct amdgpu_device *adev)
 {
-	struct amdgpu_fbdev *afbdev = adev->mode_info.rfbdev;
+	struct amdgpu_fbdev *afbdev;
 	struct drm_fb_helper *fb_helper;
 	int ret;
 
+	if (!adev)
+		return;
+
+	afbdev = adev->mode_info.rfbdev;
+
 	if (!afbdev)
 		return;
 

drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c

@@ -634,7 +634,7 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job)
 		mutex_unlock(&id_mgr->lock);
 	}
 
-	if (gds_switch_needed) {
+	if (ring->funcs->emit_gds_switch && gds_switch_needed) {
 		id->gds_base = job->gds_base;
 		id->gds_size = job->gds_size;
 		id->gws_base = job->gws_base;
@@ -672,6 +672,7 @@ void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vmhub,
 	struct amdgpu_vm_id_manager *id_mgr = &adev->vm_manager.id_mgr[vmhub];
 	struct amdgpu_vm_id *id = &id_mgr->ids[vmid];
 
+	atomic64_set(&id->owner, 0);
 	id->gds_base = 0;
 	id->gds_size = 0;
 	id->gws_base = 0;
@@ -680,6 +681,26 @@ void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vmhub,
 	id->oa_size = 0;
 }
 
+/**
+ * amdgpu_vm_reset_all_id - reset VMID to zero
+ *
+ * @adev: amdgpu device structure
+ *
+ * Reset VMID to force flush on next use
+ */
+void amdgpu_vm_reset_all_ids(struct amdgpu_device *adev)
+{
+	unsigned i, j;
+
+	for (i = 0; i < AMDGPU_MAX_VMHUBS; ++i) {
+		struct amdgpu_vm_id_manager *id_mgr =
+			&adev->vm_manager.id_mgr[i];
+
+		for (j = 1; j < id_mgr->num_ids; ++j)
+			amdgpu_vm_reset_id(adev, i, j);
+	}
+}
+
 /**
  * amdgpu_vm_bo_find - find the bo_va for a specific vm & bo
  *
@@ -2270,7 +2291,6 @@ void amdgpu_vm_manager_init(struct amdgpu_device *adev)
 	for (i = 0; i < AMDGPU_MAX_RINGS; ++i)
 		adev->vm_manager.seqno[i] = 0;
 
-
 	atomic_set(&adev->vm_manager.vm_pte_next_ring, 0);
 	atomic64_set(&adev->vm_manager.client_counter, 0);
 	spin_lock_init(&adev->vm_manager.prt_lock);

drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h

@@ -204,6 +204,7 @@ int amdgpu_vm_grab_id(struct amdgpu_vm *vm, struct amdgpu_ring *ring,
 int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job);
 void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vmhub,
 			unsigned vmid);
+void amdgpu_vm_reset_all_ids(struct amdgpu_device *adev);
 int amdgpu_vm_update_directories(struct amdgpu_device *adev,
 				 struct amdgpu_vm *vm);
 int amdgpu_vm_clear_freed(struct amdgpu_device *adev,

drivers/gpu/drm/amd/amdgpu/ci_dpm.c

@@ -906,6 +906,12 @@ static bool ci_dpm_vblank_too_short(struct amdgpu_device *adev)
 	u32 vblank_time = amdgpu_dpm_get_vblank_time(adev);
 	u32 switch_limit = adev->mc.vram_type == AMDGPU_VRAM_TYPE_GDDR5 ? 450 : 300;
 
+	/* disable mclk switching if the refresh is >120Hz, even if the
+	 * blanking period would allow it
+	 */
+	if (amdgpu_dpm_get_vrefresh(adev) > 120)
+		return true;
+
 	if (vblank_time < switch_limit)
 		return true;
 	else

drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c

@@ -950,10 +950,6 @@ static int gmc_v6_0_suspend(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
-	if (adev->vm_manager.enabled) {
-		gmc_v6_0_vm_fini(adev);
-		adev->vm_manager.enabled = false;
-	}
 	gmc_v6_0_hw_fini(adev);
 
 	return 0;
@@ -968,16 +964,9 @@ static int gmc_v6_0_resume(void *handle)
 	if (r)
 		return r;
 
-	if (!adev->vm_manager.enabled) {
-		r = gmc_v6_0_vm_init(adev);
-		if (r) {
-			dev_err(adev->dev, "vm manager initialization failed (%d).\n", r);
-			return r;
-		}
-		adev->vm_manager.enabled = true;
-	}
+	amdgpu_vm_reset_all_ids(adev);
 
-	return r;
+	return 0;
 }
 
 static bool gmc_v6_0_is_idle(void *handle)

drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c

@@ -1117,10 +1117,6 @@ static int gmc_v7_0_suspend(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
-	if (adev->vm_manager.enabled) {
-		gmc_v7_0_vm_fini(adev);
-		adev->vm_manager.enabled = false;
-	}
 	gmc_v7_0_hw_fini(adev);
 
 	return 0;
@@ -1135,16 +1131,9 @@ static int gmc_v7_0_resume(void *handle)
 	if (r)
 		return r;
 
-	if (!adev->vm_manager.enabled) {
-		r = gmc_v7_0_vm_init(adev);
-		if (r) {
-			dev_err(adev->dev, "vm manager initialization failed (%d).\n", r);
-			return r;
-		}
-		adev->vm_manager.enabled = true;
-	}
+	amdgpu_vm_reset_all_ids(adev);
 
-	return r;
+	return 0;
 }
 
 static bool gmc_v7_0_is_idle(void *handle)

drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c

@@ -1209,10 +1209,6 @@ static int gmc_v8_0_suspend(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
-	if (adev->vm_manager.enabled) {
-		gmc_v8_0_vm_fini(adev);
-		adev->vm_manager.enabled = false;
-	}
 	gmc_v8_0_hw_fini(adev);
 
 	return 0;
@@ -1227,16 +1223,9 @@ static int gmc_v8_0_resume(void *handle)
 	if (r)
 		return r;
 
-	if (!adev->vm_manager.enabled) {
-		r = gmc_v8_0_vm_init(adev);
-		if (r) {
-			dev_err(adev->dev, "vm manager initialization failed (%d).\n", r);
-			return r;
-		}
-		adev->vm_manager.enabled = true;
-	}
+	amdgpu_vm_reset_all_ids(adev);
 
-	return r;
+	return 0;
 }
 
 static bool gmc_v8_0_is_idle(void *handle)

drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c

@@ -791,10 +791,6 @@ static int gmc_v9_0_suspend(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
-	if (adev->vm_manager.enabled) {
-		gmc_v9_0_vm_fini(adev);
-		adev->vm_manager.enabled = false;
-	}
 	gmc_v9_0_hw_fini(adev);
 
 	return 0;
@@ -809,17 +805,9 @@ static int gmc_v9_0_resume(void *handle)
 	if (r)
 		return r;
 
-	if (!adev->vm_manager.enabled) {
-		r = gmc_v9_0_vm_init(adev);
-		if (r) {
-			dev_err(adev->dev,
-				"vm manager initialization failed (%d).\n", r);
-			return r;
-		}
-		adev->vm_manager.enabled = true;
-	}
+	amdgpu_vm_reset_all_ids(adev);
 
-	return r;
+	return 0;
 }
 
 static bool gmc_v9_0_is_idle(void *handle)

drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c

@@ -2655,6 +2655,28 @@ static int smu7_get_power_state_size(struct pp_hwmgr *hwmgr)
 	return sizeof(struct smu7_power_state);
 }
 
+static int smu7_vblank_too_short(struct pp_hwmgr *hwmgr,
+				 uint32_t vblank_time_us)
+{
+	struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
+	uint32_t switch_limit_us;
+
+	switch (hwmgr->chip_id) {
+	case CHIP_POLARIS10:
+	case CHIP_POLARIS11:
+	case CHIP_POLARIS12:
+		switch_limit_us = data->is_memory_gddr5 ? 190 : 150;
+		break;
+	default:
+		switch_limit_us = data->is_memory_gddr5 ? 450 : 150;
+		break;
+	}
+
+	if (vblank_time_us < switch_limit_us)
+		return true;
+	else
+		return false;
+}
 
 static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr,
 				struct pp_power_state *request_ps,
@@ -2669,6 +2691,7 @@ static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr,
 	bool disable_mclk_switching;
 	bool disable_mclk_switching_for_frame_lock;
 	struct cgs_display_info info = {0};
+	struct cgs_mode_info mode_info = {0};
 	const struct phm_clock_and_voltage_limits *max_limits;
 	uint32_t i;
 	struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
@@ -2677,6 +2700,7 @@ static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr,
 	int32_t count;
 	int32_t stable_pstate_sclk = 0, stable_pstate_mclk = 0;
 
+	info.mode_info = &mode_info;
 	data->battery_state = (PP_StateUILabel_Battery ==
 			request_ps->classification.ui_label);
 
@@ -2703,8 +2727,6 @@ static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr,
 
 	cgs_get_active_displays_info(hwmgr->device, &info);
 
-	/*TO DO result = PHM_CheckVBlankTime(hwmgr, &vblankTooShort);*/
-
 	minimum_clocks.engineClock = hwmgr->display_config.min_core_set_clock;
 	minimum_clocks.memoryClock = hwmgr->display_config.min_mem_set_clock;
 
@@ -2769,8 +2791,10 @@ static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr,
 				    PHM_PlatformCaps_DisableMclkSwitchingForFrameLock);
 
 
-	disable_mclk_switching = (1 < info.display_count) ||
-				    disable_mclk_switching_for_frame_lock;
+	disable_mclk_switching = ((1 < info.display_count) ||
+				  disable_mclk_switching_for_frame_lock ||
+				  smu7_vblank_too_short(hwmgr, mode_info.vblank_time_us) ||
+				  (mode_info.refresh_rate > 120));
 
 	sclk = smu7_ps->performance_levels[0].engine_clock;
 	mclk = smu7_ps->performance_levels[0].memory_clock;

drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c

@@ -4186,7 +4186,7 @@ static int vega10_force_clock_level(struct pp_hwmgr *hwmgr,
 		enum pp_clock_type type, uint32_t mask)
 {
 	struct vega10_hwmgr *data = (struct vega10_hwmgr *)(hwmgr->backend);
-	uint32_t i;
+	int i;
 
 	if (hwmgr->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL)
 		return -EINVAL;

drivers/gpu/drm/drm_plane.c

@@ -948,8 +948,6 @@ retry:
 	}
 
 out:
-	if (ret && crtc->funcs->page_flip_target)
-		drm_crtc_vblank_put(crtc);
 	if (fb)
 		drm_framebuffer_put(fb);
 	if (crtc->primary->old_fb)
@@ -964,5 +962,8 @@ out:
 	drm_modeset_drop_locks(&ctx);
 	drm_modeset_acquire_fini(&ctx);
 
+	if (ret && crtc->funcs->page_flip_target)
+		drm_crtc_vblank_put(crtc);
+
 	return ret;
 }

drivers/gpu/drm/gma500/psb_intel_lvds.c

@@ -759,20 +759,23 @@ void psb_intel_lvds_init(struct drm_device *dev,
 		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
 			mode_dev->panel_fixed_mode =
 			    drm_mode_duplicate(dev, scan);
+			DRM_DEBUG_KMS("Using mode from DDC\n");
 			goto out;	/* FIXME: check for quirks */
 		}
 	}
 
 	/* Failed to get EDID, what about VBT? do we need this? */
-	if (mode_dev->vbt_mode)
+	if (dev_priv->lfp_lvds_vbt_mode) {
 		mode_dev->panel_fixed_mode =
-		    drm_mode_duplicate(dev, mode_dev->vbt_mode);
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
 
-	if (!mode_dev->panel_fixed_mode)
-		if (dev_priv->lfp_lvds_vbt_mode)
-			mode_dev->panel_fixed_mode =
-				drm_mode_duplicate(dev,
-					dev_priv->lfp_lvds_vbt_mode);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			DRM_DEBUG_KMS("Using mode from VBT\n");
+			goto out;
+		}
+	}
 
 	/*
 	 * If we didn't get EDID, try checking if the panel is already turned
@@ -789,6 +792,7 @@ void psb_intel_lvds_init(struct drm_device *dev,
 		if (mode_dev->panel_fixed_mode) {
 			mode_dev->panel_fixed_mode->type |=
 			    DRM_MODE_TYPE_PREFERRED;
+			DRM_DEBUG_KMS("Using pre-programmed mode\n");
 			goto out;	/* FIXME: check for quirks */
 		}
 	}

drivers/gpu/drm/qxl/qxl_display.c

@@ -575,8 +575,6 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane,
 	if (ret)
 		return;
 
-	cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
-
 	if (fb != old_state->fb) {
 		obj = to_qxl_framebuffer(fb)->obj;
 		user_bo = gem_to_qxl_bo(obj);
@@ -614,6 +612,7 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane,
 		qxl_bo_kunmap(cursor_bo);
 		qxl_bo_kunmap(user_bo);
 
+		cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
 		cmd->u.set.visible = 1;
 		cmd->u.set.shape = qxl_bo_physical_address(qdev,
 							   cursor_bo, 0);
@@ -624,6 +623,7 @@ static void qxl_cursor_atomic_update(struct drm_plane *plane,
 		if (ret)
 			goto out_free_release;
 
+		cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
 		cmd->type = QXL_CURSOR_MOVE;
 	}
 

drivers/gpu/drm/radeon/ci_dpm.c

@@ -776,6 +776,12 @@ bool ci_dpm_vblank_too_short(struct radeon_device *rdev)
 	u32 vblank_time = r600_dpm_get_vblank_time(rdev);
 	u32 switch_limit = pi->mem_gddr5 ? 450 : 300;
 
+	/* disable mclk switching if the refresh is >120Hz, even if the
+        * blanking period would allow it
+        */
+	if (r600_dpm_get_vrefresh(rdev) > 120)
+		return true;
+
 	if (vblank_time < switch_limit)
 		return true;
 	else

drivers/gpu/drm/radeon/cik.c

@@ -7401,7 +7401,7 @@ static inline void cik_irq_ack(struct radeon_device *rdev)
 		WREG32(DC_HPD5_INT_CONTROL, tmp);
 	}
 	if (rdev->irq.stat_regs.cik.disp_int_cont5 & DC_HPD6_INTERRUPT) {
-		tmp = RREG32(DC_HPD5_INT_CONTROL);
+		tmp = RREG32(DC_HPD6_INT_CONTROL);
 		tmp |= DC_HPDx_INT_ACK;
 		WREG32(DC_HPD6_INT_CONTROL, tmp);
 	}
@@ -7431,7 +7431,7 @@ static inline void cik_irq_ack(struct radeon_device *rdev)
 		WREG32(DC_HPD5_INT_CONTROL, tmp);
 	}
 	if (rdev->irq.stat_regs.cik.disp_int_cont5 & DC_HPD6_RX_INTERRUPT) {
-		tmp = RREG32(DC_HPD5_INT_CONTROL);
+		tmp = RREG32(DC_HPD6_INT_CONTROL);
 		tmp |= DC_HPDx_RX_INT_ACK;
 		WREG32(DC_HPD6_INT_CONTROL, tmp);
 	}

drivers/gpu/drm/radeon/evergreen.c

@@ -4927,7 +4927,7 @@ static void evergreen_irq_ack(struct radeon_device *rdev)
 		WREG32(DC_HPD5_INT_CONTROL, tmp);
 	}
 	if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_INTERRUPT) {
-		tmp = RREG32(DC_HPD5_INT_CONTROL);
+		tmp = RREG32(DC_HPD6_INT_CONTROL);
 		tmp |= DC_HPDx_INT_ACK;
 		WREG32(DC_HPD6_INT_CONTROL, tmp);
 	}
@@ -4958,7 +4958,7 @@ static void evergreen_irq_ack(struct radeon_device *rdev)
 		WREG32(DC_HPD5_INT_CONTROL, tmp);
 	}
 	if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_RX_INTERRUPT) {
-		tmp = RREG32(DC_HPD5_INT_CONTROL);
+		tmp = RREG32(DC_HPD6_INT_CONTROL);
 		tmp |= DC_HPDx_RX_INT_ACK;
 		WREG32(DC_HPD6_INT_CONTROL, tmp);
 	}

drivers/gpu/drm/radeon/r600.c

@@ -3988,7 +3988,7 @@ static void r600_irq_ack(struct radeon_device *rdev)
 			WREG32(DC_HPD5_INT_CONTROL, tmp);
 		}
 		if (rdev->irq.stat_regs.r600.disp_int_cont2 & DC_HPD6_INTERRUPT) {
-			tmp = RREG32(DC_HPD5_INT_CONTROL);
+			tmp = RREG32(DC_HPD6_INT_CONTROL);
 			tmp |= DC_HPDx_INT_ACK;
 			WREG32(DC_HPD6_INT_CONTROL, tmp);
 		}

drivers/gpu/drm/radeon/radeon_kms.c

@@ -116,7 +116,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	if ((radeon_runtime_pm != 0) &&
 	    radeon_has_atpx() &&
 	    ((flags & RADEON_IS_IGP) == 0) &&
-	    !pci_is_thunderbolt_attached(rdev->pdev))
+	    !pci_is_thunderbolt_attached(dev->pdev))
 		flags |= RADEON_IS_PX;
 
 	/* radeon_device_init should report only fatal error

drivers/gpu/drm/radeon/si.c

@@ -6317,7 +6317,7 @@ static inline void si_irq_ack(struct radeon_device *rdev)
 		WREG32(DC_HPD5_INT_CONTROL, tmp);
 	}
 	if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_INTERRUPT) {
-		tmp = RREG32(DC_HPD5_INT_CONTROL);
+		tmp = RREG32(DC_HPD6_INT_CONTROL);
 		tmp |= DC_HPDx_INT_ACK;
 		WREG32(DC_HPD6_INT_CONTROL, tmp);
 	}
@@ -6348,7 +6348,7 @@ static inline void si_irq_ack(struct radeon_device *rdev)
 		WREG32(DC_HPD5_INT_CONTROL, tmp);
 	}
 	if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & DC_HPD6_RX_INTERRUPT) {
-		tmp = RREG32(DC_HPD5_INT_CONTROL);
+		tmp = RREG32(DC_HPD6_INT_CONTROL);
 		tmp |= DC_HPDx_RX_INT_ACK;
 		WREG32(DC_HPD6_INT_CONTROL, tmp);
 	}

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -94,9 +94,9 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
 static int dw_i2c_acpi_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
 	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
 	const struct acpi_device_id *id;
-	u32 ss_ht, fp_ht, hs_ht, fs_ht;
 	struct acpi_device *adev;
 	const char *uid;
 

drivers/i2c/busses/i2c-tiny-usb.c

@@ -178,22 +178,39 @@ static int usb_read(struct i2c_adapter *adapter, int cmd,
 		    int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmalloc(len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
-			       USB_DIR_IN, value, index, data, len, 2000);
+			       USB_DIR_IN, value, index, dmadata, len, 2000);
+
+	memcpy(data, dmadata, len);
+	kfree(dmadata);
+	return ret;
 }
 
 static int usb_write(struct i2c_adapter *adapter, int cmd,
 		     int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmemdup(data, len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-			       value, index, data, len, 2000);
+			       value, index, dmadata, len, 2000);
+
+	kfree(dmadata);
+	return ret;
 }
 
 static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)

drivers/input/mouse/elan_i2c_i2c.c

@@ -554,32 +554,34 @@ static int elan_i2c_finish_fw_update(struct i2c_client *client,
 				     struct completion *completion)
 {
 	struct device *dev = &client->dev;
-	long ret;
 	int error;
 	int len;
-	u8 buffer[ETP_I2C_INF_LENGTH];
+	u8 buffer[ETP_I2C_REPORT_LEN];
+
+	len = i2c_master_recv(client, buffer, ETP_I2C_REPORT_LEN);
+	if (len != ETP_I2C_REPORT_LEN) {
+		error = len < 0 ? len : -EIO;
+		dev_warn(dev, "failed to read I2C data after FW WDT reset: %d (%d)\n",
+			error, len);
+	}
 
 	reinit_completion(completion);
 	enable_irq(client->irq);
 
 	error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET);
-	if (!error)
-		ret = wait_for_completion_interruptible_timeout(completion,
-							msecs_to_jiffies(300));
-	disable_irq(client->irq);
-
 	if (error) {
 		dev_err(dev, "device reset failed: %d\n", error);
-		return error;
-	} else if (ret == 0) {
+	} else if (!wait_for_completion_timeout(completion,
+						msecs_to_jiffies(300))) {
 		dev_err(dev, "timeout waiting for device reset\n");
-		return -ETIMEDOUT;
-	} else if (ret < 0) {
-		error = ret;
-		dev_err(dev, "error waiting for device reset: %d\n", error);
-		return error;
+		error = -ETIMEDOUT;
 	}
 
+	disable_irq(client->irq);
+
+	if (error)
+		return error;
+
 	len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH);
 	if (len != ETP_I2C_INF_LENGTH) {
 		error = len < 0 ? len : -EIO;

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -350,6 +350,7 @@ static bool mxt_object_readable(unsigned int type)
 	case MXT_TOUCH_KEYARRAY_T15:
 	case MXT_TOUCH_PROXIMITY_T23:
 	case MXT_TOUCH_PROXKEY_T52:
+	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
 	case MXT_PROCI_GRIPFACE_T20:
 	case MXT_PROCG_NOISE_T22:
 	case MXT_PROCI_ONETOUCH_T24:

drivers/input/touchscreen/edt-ft5x06.c

@@ -471,7 +471,7 @@ static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN,
 static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
 		M09_REGISTER_OFFSET, 0, 31);
 static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
-		M09_REGISTER_THRESHOLD, 20, 80);
+		M09_REGISTER_THRESHOLD, 0, 80);
 static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
 		NO_REGISTER, 3, 14);
 

drivers/leds/leds-pca955x.c

@@ -285,7 +285,7 @@ static int pca955x_probe(struct i2c_client *client,
 			"slave address 0x%02x\n",
 			client->name, chip->bits, client->addr);
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -EIO;
 
 	if (pdata) {

drivers/mmc/core/pwrseq_simple.c

@@ -27,6 +27,7 @@ struct mmc_pwrseq_simple {
 	struct mmc_pwrseq pwrseq;
 	bool clk_enabled;
 	u32 post_power_on_delay_ms;
+	u32 power_off_delay_us;
 	struct clk *ext_clk;
 	struct gpio_descs *reset_gpios;
 };
@@ -78,6 +79,10 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
 
 	mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
 
+	if (pwrseq->power_off_delay_us)
+		usleep_range(pwrseq->power_off_delay_us,
+			2 * pwrseq->power_off_delay_us);
+
 	if (!IS_ERR(pwrseq->ext_clk) && pwrseq->clk_enabled) {
 		clk_disable_unprepare(pwrseq->ext_clk);
 		pwrseq->clk_enabled = false;
@@ -119,6 +124,8 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev)
 
 	device_property_read_u32(dev, "post-power-on-delay-ms",
 				 &pwrseq->post_power_on_delay_ms);
+	device_property_read_u32(dev, "power-off-delay-us",
+				 &pwrseq->power_off_delay_us);
 
 	pwrseq->pwrseq.dev = dev;
 	pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;

drivers/mmc/host/cavium-octeon.c

@@ -108,7 +108,7 @@ static void octeon_mmc_release_bus(struct cvm_mmc_host *host)
 static void octeon_mmc_int_enable(struct cvm_mmc_host *host, u64 val)
 {
 	writeq(val, host->base + MIO_EMM_INT(host));
-	if (!host->dma_active || (host->dma_active && !host->has_ciu3))
+	if (!host->has_ciu3)
 		writeq(val, host->base + MIO_EMM_INT_EN(host));
 }
 
@@ -267,7 +267,7 @@ static int octeon_mmc_probe(struct platform_device *pdev)
 	}
 
 	host->global_pwr_gpiod = devm_gpiod_get_optional(&pdev->dev,
-							 "power-gpios",
+							 "power",
 							 GPIOD_OUT_HIGH);
 	if (IS_ERR(host->global_pwr_gpiod)) {
 		dev_err(&pdev->dev, "Invalid power GPIO\n");
@@ -288,11 +288,20 @@ static int octeon_mmc_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "Error populating slots\n");
 			octeon_mmc_set_shared_power(host, 0);
-			return ret;
+			goto error;
 		}
 		i++;
 	}
 	return 0;
+
+error:
+	for (i = 0; i < CAVIUM_MAX_MMC; i++) {
+		if (host->slot[i])
+			cvm_mmc_of_slot_remove(host->slot[i]);
+		if (host->slot_pdev[i])
+			of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL);
+	}
+	return ret;
 }
 
 static int octeon_mmc_remove(struct platform_device *pdev)

drivers/mmc/host/cavium-thunderx.c

@@ -146,6 +146,12 @@ static int thunder_mmc_probe(struct pci_dev *pdev,
 	return 0;
 
 error:
+	for (i = 0; i < CAVIUM_MAX_MMC; i++) {
+		if (host->slot[i])
+			cvm_mmc_of_slot_remove(host->slot[i]);
+		if (host->slot_pdev[i])
+			of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL);
+	}
 	clk_disable_unprepare(host->clk);
 	return ret;
 }

drivers/mmc/host/cavium.c

@@ -839,14 +839,14 @@ static void cvm_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		cvm_mmc_reset_bus(slot);
 		if (host->global_pwr_gpiod)
 			host->set_shared_power(host, 0);
-		else
+		else if (!IS_ERR(mmc->supply.vmmc))
 			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 		break;
 
 	case MMC_POWER_UP:
 		if (host->global_pwr_gpiod)
 			host->set_shared_power(host, 1);
-		else
+		else if (!IS_ERR(mmc->supply.vmmc))
 			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
 		break;
 	}
@@ -968,20 +968,15 @@ static int cvm_mmc_of_parse(struct device *dev, struct cvm_mmc_slot *slot)
 		return -EINVAL;
 	}
 
-	mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
-	if (IS_ERR(mmc->supply.vmmc)) {
-		if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		/*
-		 * Legacy Octeon firmware has no regulator entry, fall-back to
-		 * a hard-coded voltage to get a sane OCR.
-		 */
+	ret = mmc_regulator_get_supply(mmc);
+	if (ret == -EPROBE_DEFER)
+		return ret;
+	/*
+	 * Legacy Octeon firmware has no regulator entry, fall-back to
+	 * a hard-coded voltage to get a sane OCR.
+	 */
+	if (IS_ERR(mmc->supply.vmmc))
 		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	} else {
-		ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
-		if (ret > 0)
-			mmc->ocr_avail = ret;
-	}
 
 	/* Common MMC bindings */
 	ret = mmc_of_parse(mmc);

drivers/mmc/host/sdhci-iproc.c

@@ -187,7 +187,8 @@ static const struct sdhci_iproc_data iproc_cygnus_data = {
 };
 
 static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
-	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
 	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
 	.ops = &sdhci_iproc_ops,
 };

drivers/mmc/host/sdhci-xenon-phy.c

@@ -787,14 +787,6 @@ int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
 	return ret;
 }
 
-void xenon_clean_phy(struct sdhci_host *host)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
-
-	kfree(priv->phy_params);
-}
-
 static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
 			 const char *phy_name)
 {
@@ -819,11 +811,7 @@ static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
 	if (ret)
 		return ret;
 
-	ret = xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params);
-	if (ret)
-		xenon_clean_phy(host);
-
-	return ret;
+	return xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params);
 }
 
 int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)

drivers/mmc/host/sdhci-xenon.c

@@ -486,7 +486,7 @@ static int xenon_probe(struct platform_device *pdev)
 
 	err = xenon_sdhc_prepare(host);
 	if (err)
-		goto clean_phy_param;
+		goto err_clk;
 
 	err = sdhci_add_host(host);
 	if (err)
@@ -496,8 +496,6 @@ static int xenon_probe(struct platform_device *pdev)
 
 remove_sdhc:
 	xenon_sdhc_unprepare(host);
-clean_phy_param:
-	xenon_clean_phy(host);
 err_clk:
 	clk_disable_unprepare(pltfm_host->clk);
 free_pltfm:
@@ -510,8 +508,6 @@ static int xenon_remove(struct platform_device *pdev)
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 
-	xenon_clean_phy(host);
-
 	sdhci_remove_host(host, 0);
 
 	xenon_sdhc_unprepare(host);

drivers/mmc/host/sdhci-xenon.h

@@ -93,7 +93,6 @@ struct xenon_priv {
 };
 
 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
-void xenon_clean_phy(struct sdhci_host *host);
 int xenon_phy_parse_dt(struct device_node *np,
 		       struct sdhci_host *host);
 void xenon_soc_pad_ctrl(struct sdhci_host *host,

drivers/net/bonding/bond_3ad.c

@@ -2577,7 +2577,7 @@ int __bond_3ad_get_active_agg_info(struct bonding *bond,
 		return -1;
 
 	ad_info->aggregator_id = aggregator->aggregator_identifier;
-	ad_info->ports = aggregator->num_of_ports;
+	ad_info->ports = __agg_active_ports(aggregator);
 	ad_info->actor_key = aggregator->actor_oper_aggregator_key;
 	ad_info->partner_key = aggregator->partner_oper_aggregator_key;
 	ether_addr_copy(ad_info->partner_system,

drivers/net/bonding/bond_main.c

@@ -2612,11 +2612,13 @@ static void bond_loadbalance_arp_mon(struct bonding *bond)
 	bond_for_each_slave_rcu(bond, slave, iter) {
 		unsigned long trans_start = dev_trans_start(slave->dev);
 
+		slave->new_link = BOND_LINK_NOCHANGE;
+
 		if (slave->link != BOND_LINK_UP) {
 			if (bond_time_in_interval(bond, trans_start, 1) &&
 			    bond_time_in_interval(bond, slave->last_rx, 1)) {
 
-				slave->link  = BOND_LINK_UP;
+				slave->new_link = BOND_LINK_UP;
 				slave_state_changed = 1;
 
 				/* primary_slave has no meaning in round-robin
@@ -2643,7 +2645,7 @@ static void bond_loadbalance_arp_mon(struct bonding *bond)
 			if (!bond_time_in_interval(bond, trans_start, 2) ||
 			    !bond_time_in_interval(bond, slave->last_rx, 2)) {
 
-				slave->link  = BOND_LINK_DOWN;
+				slave->new_link = BOND_LINK_DOWN;
 				slave_state_changed = 1;
 
 				if (slave->link_failure_count < UINT_MAX)
@@ -2674,6 +2676,11 @@ static void bond_loadbalance_arp_mon(struct bonding *bond)
 		if (!rtnl_trylock())
 			goto re_arm;
 
+		bond_for_each_slave(bond, slave, iter) {
+			if (slave->new_link != BOND_LINK_NOCHANGE)
+				slave->link = slave->new_link;
+		}
+
 		if (slave_state_changed) {
 			bond_slave_state_change(bond);
 			if (BOND_MODE(bond) == BOND_MODE_XOR)
@@ -4271,10 +4278,10 @@ static int bond_check_params(struct bond_params *params)
 	int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
 	struct bond_opt_value newval;
 	const struct bond_opt_value *valptr;
-	int arp_all_targets_value;
+	int arp_all_targets_value = 0;
 	u16 ad_actor_sys_prio = 0;
 	u16 ad_user_port_key = 0;
-	__be32 arp_target[BOND_MAX_ARP_TARGETS];
+	__be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };
 	int arp_ip_count;
 	int bond_mode	= BOND_MODE_ROUNDROBIN;
 	int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
@@ -4501,7 +4508,6 @@ static int bond_check_params(struct bond_params *params)
 		arp_validate_value = 0;
 	}
 
-	arp_all_targets_value = 0;
 	if (arp_all_targets) {
 		bond_opt_initstr(&newval, arp_all_targets);
 		valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),

drivers/net/ethernet/8390/ax88796.c

@@ -748,13 +748,13 @@ static int ax_init_dev(struct net_device *dev)
 
 	ret = ax_mii_init(dev);
 	if (ret)
-		goto out_irq;
+		goto err_out;
 
 	ax_NS8390_init(dev, 0);
 
 	ret = register_netdev(dev);
 	if (ret)
-		goto out_irq;
+		goto err_out;
 
 	netdev_info(dev, "%dbit, irq %d, %lx, MAC: %pM\n",
 		    ei_local->word16 ? 16 : 8, dev->irq, dev->base_addr,
@@ -762,9 +762,6 @@ static int ax_init_dev(struct net_device *dev)
 
 	return 0;
 
- out_irq:
-	/* cleanup irq */
-	free_irq(dev->irq, dev);
  err_out:
 	return ret;
 }

drivers/net/ethernet/atheros/atlx/atl2.c

@@ -1353,6 +1353,7 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
 		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
+		err = -EIO;
 		goto err_dma;
 	}
 
@@ -1366,10 +1367,11 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * pcibios_set_master to do the needed arch specific settings */
 	pci_set_master(pdev);
 
-	err = -ENOMEM;
 	netdev = alloc_etherdev(sizeof(struct atl2_adapter));
-	if (!netdev)
+	if (!netdev) {
+		err = -ENOMEM;
 		goto err_alloc_etherdev;
+	}
 
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 
@@ -1408,8 +1410,6 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_sw_init;
 
-	err = -EIO;
-
 	netdev->hw_features = NETIF_F_HW_VLAN_CTAG_RX;
 	netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
 

drivers/net/ethernet/emulex/benet/be_main.c

@@ -5078,9 +5078,11 @@ static netdev_features_t be_features_check(struct sk_buff *skb,
 	struct be_adapter *adapter = netdev_priv(dev);
 	u8 l4_hdr = 0;
 
-	/* The code below restricts offload features for some tunneled packets.
+	/* The code below restricts offload features for some tunneled and
+	 * Q-in-Q packets.
 	 * Offload features for normal (non tunnel) packets are unchanged.
 	 */
+	features = vlan_features_check(skb, features);
 	if (!skb->encapsulation ||
 	    !(adapter->flags & BE_FLAGS_VXLAN_OFFLOADS))
 		return features;

drivers/net/ethernet/freescale/fec_main.c

@@ -3192,7 +3192,7 @@ static int fec_reset_phy(struct platform_device *pdev)
 {
 	int err, phy_reset;
 	bool active_high = false;
-	int msec = 1;
+	int msec = 1, phy_post_delay = 0;
 	struct device_node *np = pdev->dev.of_node;
 
 	if (!np)
@@ -3209,6 +3209,11 @@ static int fec_reset_phy(struct platform_device *pdev)
 	else if (!gpio_is_valid(phy_reset))
 		return 0;
 
+	err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
+	/* valid reset duration should be less than 1s */
+	if (!err && phy_post_delay > 1000)
+		return -EINVAL;
+
 	active_high = of_property_read_bool(np, "phy-reset-active-high");
 
 	err = devm_gpio_request_one(&pdev->dev, phy_reset,
@@ -3226,6 +3231,15 @@ static int fec_reset_phy(struct platform_device *pdev)
 
 	gpio_set_value_cansleep(phy_reset, !active_high);
 
+	if (!phy_post_delay)
+		return 0;
+
+	if (phy_post_delay > 20)
+		msleep(phy_post_delay);
+	else
+		usleep_range(phy_post_delay * 1000,
+			     phy_post_delay * 1000 + 1000);
+
 	return 0;
 }
 #else /* CONFIG_OF */

drivers/net/ethernet/mellanox/mlx5/core/cmd.c

@@ -774,7 +774,7 @@ static void cb_timeout_handler(struct work_struct *work)
 	mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n",
 		       mlx5_command_str(msg_to_opcode(ent->in)),
 		       msg_to_opcode(ent->in));
-	mlx5_cmd_comp_handler(dev, 1UL << ent->idx);
+	mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
 }
 
 static void cmd_work_handler(struct work_struct *work)
@@ -804,6 +804,7 @@ static void cmd_work_handler(struct work_struct *work)
 	}
 
 	cmd->ent_arr[ent->idx] = ent;
+	set_bit(MLX5_CMD_ENT_STATE_PENDING_COMP, &ent->state);
 	lay = get_inst(cmd, ent->idx);
 	ent->lay = lay;
 	memset(lay, 0, sizeof(*lay));
@@ -825,6 +826,20 @@ static void cmd_work_handler(struct work_struct *work)
 	if (ent->callback)
 		schedule_delayed_work(&ent->cb_timeout_work, cb_timeout);
 
+	/* Skip sending command to fw if internal error */
+	if (pci_channel_offline(dev->pdev) ||
+	    dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) {
+		u8 status = 0;
+		u32 drv_synd;
+
+		ent->ret = mlx5_internal_err_ret_value(dev, msg_to_opcode(ent->in), &drv_synd, &status);
+		MLX5_SET(mbox_out, ent->out, status, status);
+		MLX5_SET(mbox_out, ent->out, syndrome, drv_synd);
+
+		mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
+		return;
+	}
+
 	/* ring doorbell after the descriptor is valid */
 	mlx5_core_dbg(dev, "writing 0x%x to command doorbell\n", 1 << ent->idx);
 	wmb();
@@ -835,7 +850,7 @@ static void cmd_work_handler(struct work_struct *work)
 		poll_timeout(ent);
 		/* make sure we read the descriptor after ownership is SW */
 		rmb();
-		mlx5_cmd_comp_handler(dev, 1UL << ent->idx);
+		mlx5_cmd_comp_handler(dev, 1UL << ent->idx, (ent->ret == -ETIMEDOUT));
 	}
 }
 
@@ -879,7 +894,7 @@ static int wait_func(struct mlx5_core_dev *dev, struct mlx5_cmd_work_ent *ent)
 		wait_for_completion(&ent->done);
 	} else if (!wait_for_completion_timeout(&ent->done, timeout)) {
 		ent->ret = -ETIMEDOUT;
-		mlx5_cmd_comp_handler(dev, 1UL << ent->idx);
+		mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
 	}
 
 	err = ent->ret;
@@ -1375,7 +1390,7 @@ static void free_msg(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *msg)
 	}
 }
 
-void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec)
+void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool forced)
 {
 	struct mlx5_cmd *cmd = &dev->cmd;
 	struct mlx5_cmd_work_ent *ent;
@@ -1395,6 +1410,19 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec)
 			struct semaphore *sem;
 
 			ent = cmd->ent_arr[i];
+
+			/* if we already completed the command, ignore it */
+			if (!test_and_clear_bit(MLX5_CMD_ENT_STATE_PENDING_COMP,
+						&ent->state)) {
+				/* only real completion can free the cmd slot */
+				if (!forced) {
+					mlx5_core_err(dev, "Command completion arrived after timeout (entry idx = %d).\n",
+						      ent->idx);
+					free_ent(cmd, ent->idx);
+				}
+				continue;
+			}
+
 			if (ent->callback)
 				cancel_delayed_work(&ent->cb_timeout_work);
 			if (ent->page_queue)
@@ -1417,7 +1445,10 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec)
 				mlx5_core_dbg(dev, "command completed. ret 0x%x, delivery status %s(0x%x)\n",
 					      ent->ret, deliv_status_to_str(ent->status), ent->status);
 			}
-			free_ent(cmd, ent->idx);
+
+			/* only real completion will free the entry slot */
+			if (!forced)
+				free_ent(cmd, ent->idx);
 
 			if (ent->callback) {
 				ds = ent->ts2 - ent->ts1;

drivers/net/ethernet/mellanox/mlx5/core/en_rx.c

@@ -1041,6 +1041,8 @@ void mlx5e_free_xdpsq_descs(struct mlx5e_xdpsq *sq)
 #define MLX5_IB_GRH_BYTES       40
 #define MLX5_IPOIB_ENCAP_LEN    4
 #define MLX5_GID_SIZE           16
+#define MLX5_IPOIB_PSEUDO_LEN   20
+#define MLX5_IPOIB_HARD_LEN     (MLX5_IPOIB_PSEUDO_LEN + MLX5_IPOIB_ENCAP_LEN)
 
 static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 					 struct mlx5_cqe64 *cqe,
@@ -1048,6 +1050,7 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 					 struct sk_buff *skb)
 {
 	struct net_device *netdev = rq->netdev;
+	char *pseudo_header;
 	u8 *dgid;
 	u8 g;
 
@@ -1076,8 +1079,11 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	if (likely(netdev->features & NETIF_F_RXHASH))
 		mlx5e_skb_set_hash(cqe, skb);
 
+	/* 20 bytes of ipoib header and 4 for encap existing */
+	pseudo_header = skb_push(skb, MLX5_IPOIB_PSEUDO_LEN);
+	memset(pseudo_header, 0, MLX5_IPOIB_PSEUDO_LEN);
 	skb_reset_mac_header(skb);
-	skb_pull(skb, MLX5_IPOIB_ENCAP_LEN);
+	skb_pull(skb, MLX5_IPOIB_HARD_LEN);
 
 	skb->dev = netdev;
 

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -43,6 +43,7 @@
 #include <net/tc_act/tc_vlan.h>
 #include <net/tc_act/tc_tunnel_key.h>
 #include <net/tc_act/tc_pedit.h>
+#include <net/tc_act/tc_csum.h>
 #include <net/vxlan.h>
 #include <net/arp.h>
 #include "en.h"
@@ -384,7 +385,7 @@ static void mlx5e_detach_encap(struct mlx5e_priv *priv,
 		if (e->flags & MLX5_ENCAP_ENTRY_VALID)
 			mlx5_encap_dealloc(priv->mdev, e->encap_id);
 
-		hlist_del_rcu(&e->encap_hlist);
+		hash_del_rcu(&e->encap_hlist);
 		kfree(e->encap_header);
 		kfree(e);
 	}
@@ -925,11 +926,11 @@ static int offload_pedit_fields(struct pedit_headers *masks,
 				struct mlx5e_tc_flow_parse_attr *parse_attr)
 {
 	struct pedit_headers *set_masks, *add_masks, *set_vals, *add_vals;
-	int i, action_size, nactions, max_actions, first, last;
+	int i, action_size, nactions, max_actions, first, last, first_z;
 	void *s_masks_p, *a_masks_p, *vals_p;
-	u32 s_mask, a_mask, val;
 	struct mlx5_fields *f;
 	u8 cmd, field_bsize;
+	u32 s_mask, a_mask;
 	unsigned long mask;
 	void *action;
 
@@ -946,7 +947,8 @@ static int offload_pedit_fields(struct pedit_headers *masks,
 	for (i = 0; i < ARRAY_SIZE(fields); i++) {
 		f = &fields[i];
 		/* avoid seeing bits set from previous iterations */
-		s_mask = a_mask = mask = val = 0;
+		s_mask = 0;
+		a_mask = 0;
 
 		s_masks_p = (void *)set_masks + f->offset;
 		a_masks_p = (void *)add_masks + f->offset;
@@ -981,12 +983,12 @@ static int offload_pedit_fields(struct pedit_headers *masks,
 			memset(a_masks_p, 0, f->size);
 		}
 
-		memcpy(&val, vals_p, f->size);
-
 		field_bsize = f->size * BITS_PER_BYTE;
+
+		first_z = find_first_zero_bit(&mask, field_bsize);
 		first = find_first_bit(&mask, field_bsize);
 		last  = find_last_bit(&mask, field_bsize);
-		if (first > 0 || last != (field_bsize - 1)) {
+		if (first > 0 || last != (field_bsize - 1) || first_z < last) {
 			printk(KERN_WARNING "mlx5: partial rewrite (mask %lx) is currently not offloaded\n",
 			       mask);
 			return -EOPNOTSUPP;
@@ -1002,11 +1004,11 @@ static int offload_pedit_fields(struct pedit_headers *masks,
 		}
 
 		if (field_bsize == 32)
-			MLX5_SET(set_action_in, action, data, ntohl(val));
+			MLX5_SET(set_action_in, action, data, ntohl(*(__be32 *)vals_p));
 		else if (field_bsize == 16)
-			MLX5_SET(set_action_in, action, data, ntohs(val));
+			MLX5_SET(set_action_in, action, data, ntohs(*(__be16 *)vals_p));
 		else if (field_bsize == 8)
-			MLX5_SET(set_action_in, action, data, val);
+			MLX5_SET(set_action_in, action, data, *(u8 *)vals_p);
 
 		action += action_size;
 		nactions++;
@@ -1109,6 +1111,28 @@ out_err:
 	return err;
 }
 
+static bool csum_offload_supported(struct mlx5e_priv *priv, u32 action, u32 update_flags)
+{
+	u32 prot_flags = TCA_CSUM_UPDATE_FLAG_IPV4HDR | TCA_CSUM_UPDATE_FLAG_TCP |
+			 TCA_CSUM_UPDATE_FLAG_UDP;
+
+	/*  The HW recalcs checksums only if re-writing headers */
+	if (!(action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR)) {
+		netdev_warn(priv->netdev,
+			    "TC csum action is only offloaded with pedit\n");
+		return false;
+	}
+
+	if (update_flags & ~prot_flags) {
+		netdev_warn(priv->netdev,
+			    "can't offload TC csum action for some header/s - flags %#x\n",
+			    update_flags);
+		return false;
+	}
+
+	return true;
+}
+
 static int parse_tc_nic_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
 				struct mlx5e_tc_flow_parse_attr *parse_attr,
 				struct mlx5e_tc_flow *flow)
@@ -1149,6 +1173,14 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
 			continue;
 		}
 
+		if (is_tcf_csum(a)) {
+			if (csum_offload_supported(priv, attr->action,
+						   tcf_csum_update_flags(a)))
+				continue;
+
+			return -EOPNOTSUPP;
+		}
+
 		if (is_tcf_skbedit_mark(a)) {
 			u32 mark = tcf_skbedit_mark(a);
 
@@ -1651,6 +1683,14 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
 			continue;
 		}
 
+		if (is_tcf_csum(a)) {
+			if (csum_offload_supported(priv, attr->action,
+						   tcf_csum_update_flags(a)))
+				continue;
+
+			return -EOPNOTSUPP;
+		}
+
 		if (is_tcf_mirred_egress_redirect(a)) {
 			int ifindex = tcf_mirred_ifindex(a);
 			struct net_device *out_dev, *encap_dev = NULL;

drivers/net/ethernet/mellanox/mlx5/core/eq.c

@@ -422,7 +422,7 @@ static irqreturn_t mlx5_eq_int(int irq, void *eq_ptr)
 			break;
 
 		case MLX5_EVENT_TYPE_CMD:
-			mlx5_cmd_comp_handler(dev, be32_to_cpu(eqe->data.cmd.vector));
+			mlx5_cmd_comp_handler(dev, be32_to_cpu(eqe->data.cmd.vector), false);
 			break;
 
 		case MLX5_EVENT_TYPE_PORT_CHANGE:

drivers/net/ethernet/mellanox/mlx5/core/health.c

@@ -90,7 +90,7 @@ static void trigger_cmd_completions(struct mlx5_core_dev *dev)
 	spin_unlock_irqrestore(&dev->cmd.alloc_lock, flags);
 
 	mlx5_core_dbg(dev, "vector 0x%llx\n", vector);
-	mlx5_cmd_comp_handler(dev, vector);
+	mlx5_cmd_comp_handler(dev, vector, true);
 	return;
 
 no_trig:

drivers/net/ethernet/mellanox/mlx5/core/main.c

@@ -612,7 +612,6 @@ static int mlx5_irq_set_affinity_hint(struct mlx5_core_dev *mdev, int i)
 	struct mlx5_priv *priv  = &mdev->priv;
 	struct msix_entry *msix = priv->msix_arr;
 	int irq                 = msix[i + MLX5_EQ_VEC_COMP_BASE].vector;
-	int err;
 
 	if (!zalloc_cpumask_var(&priv->irq_info[i].mask, GFP_KERNEL)) {
 		mlx5_core_warn(mdev, "zalloc_cpumask_var failed");
@@ -622,18 +621,12 @@ static int mlx5_irq_set_affinity_hint(struct mlx5_core_dev *mdev, int i)
 	cpumask_set_cpu(cpumask_local_spread(i, priv->numa_node),
 			priv->irq_info[i].mask);
 
-	err = irq_set_affinity_hint(irq, priv->irq_info[i].mask);
-	if (err) {
-		mlx5_core_warn(mdev, "irq_set_affinity_hint failed,irq 0x%.4x",
-			       irq);
-		goto err_clear_mask;
-	}
+#ifdef CONFIG_SMP
+	if (irq_set_affinity_hint(irq, priv->irq_info[i].mask))
+		mlx5_core_warn(mdev, "irq_set_affinity_hint failed, irq 0x%.4x", irq);
+#endif
 
 	return 0;
-
-err_clear_mask:
-	free_cpumask_var(priv->irq_info[i].mask);
-	return err;
 }
 
 static void mlx5_irq_clear_affinity_hint(struct mlx5_core_dev *mdev, int i)

drivers/net/geneve.c

@@ -1293,7 +1293,7 @@ static int geneve_fill_info(struct sk_buff *skb, const struct net_device *dev)
 	if (nla_put_u32(skb, IFLA_GENEVE_ID, vni))
 		goto nla_put_failure;
 
-	if (ip_tunnel_info_af(info) == AF_INET) {
+	if (rtnl_dereference(geneve->sock4)) {
 		if (nla_put_in_addr(skb, IFLA_GENEVE_REMOTE,
 				    info->key.u.ipv4.dst))
 			goto nla_put_failure;
@@ -1302,8 +1302,10 @@ static int geneve_fill_info(struct sk_buff *skb, const struct net_device *dev)
 			       !!(info->key.tun_flags & TUNNEL_CSUM)))
 			goto nla_put_failure;
 
+	}
+
 #if IS_ENABLED(CONFIG_IPV6)
-	} else {
+	if (rtnl_dereference(geneve->sock6)) {
 		if (nla_put_in6_addr(skb, IFLA_GENEVE_REMOTE6,
 				     &info->key.u.ipv6.dst))
 			goto nla_put_failure;
@@ -1315,8 +1317,8 @@ static int geneve_fill_info(struct sk_buff *skb, const struct net_device *dev)
 		if (nla_put_u8(skb, IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
 			       !geneve->use_udp6_rx_checksums))
 			goto nla_put_failure;
-#endif
 	}
+#endif
 
 	if (nla_put_u8(skb, IFLA_GENEVE_TTL, info->key.ttl) ||
 	    nla_put_u8(skb, IFLA_GENEVE_TOS, info->key.tos) ||

drivers/net/gtp.c

@@ -873,7 +873,7 @@ static struct gtp_dev *gtp_find_dev(struct net *src_net, struct nlattr *nla[])
 
 	/* Check if there's an existing gtpX device to configure */
 	dev = dev_get_by_index_rcu(net, nla_get_u32(nla[GTPA_LINK]));
-	if (dev->netdev_ops == &gtp_netdev_ops)
+	if (dev && dev->netdev_ops == &gtp_netdev_ops)
 		gtp = netdev_priv(dev);
 
 	put_net(net);

drivers/net/phy/Kconfig

@@ -108,7 +108,7 @@ config MDIO_MOXART
 config MDIO_OCTEON
 	tristate "Octeon and some ThunderX SOCs MDIO buses"
 	depends on 64BIT
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && OF_MDIO
 	select MDIO_CAVIUM
 	help
 	  This module provides a driver for the Octeon and ThunderX MDIO

drivers/net/phy/marvell.c

@@ -255,34 +255,6 @@ static int marvell_config_aneg(struct phy_device *phydev)
 {
 	int err;
 
-	/* The Marvell PHY has an errata which requires
-	 * that certain registers get written in order
-	 * to restart autonegotiation */
-	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1d, 0x1f);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0x200c);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1d, 0x5);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0x100);
-	if (err < 0)
-		return err;
-
 	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
@@ -316,6 +288,42 @@ static int marvell_config_aneg(struct phy_device *phydev)
 	return 0;
 }
 
+static int m88e1101_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	/* This Marvell PHY has an errata which requires
+	 * that certain registers get written in order
+	 * to restart autonegotiation
+	 */
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x1f);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x200c);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x5);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x100);
+	if (err < 0)
+		return err;
+
+	return marvell_config_aneg(phydev);
+}
+
 static int m88e1111_config_aneg(struct phy_device *phydev)
 {
 	int err;
@@ -1892,7 +1900,7 @@ static struct phy_driver marvell_drivers[] = {
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &marvell_config_init,
-		.config_aneg = &marvell_config_aneg,
+		.config_aneg = &m88e1101_config_aneg,
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,

drivers/net/usb/cdc_ether.c

@@ -310,6 +310,26 @@ skip:
 		return -ENODEV;
 	}
 
+	return 0;
+
+bad_desc:
+	dev_info(&dev->udev->dev, "bad CDC descriptors\n");
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+
+
+/* like usbnet_generic_cdc_bind() but handles filter initialization
+ * correctly
+ */
+int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int rv;
+
+	rv = usbnet_generic_cdc_bind(dev, intf);
+	if (rv < 0)
+		goto bail_out;
+
 	/* Some devices don't initialise properly. In particular
 	 * the packet filter is not reset. There are devices that
 	 * don't do reset all the way. So the packet filter should
@@ -317,13 +337,10 @@ skip:
 	 */
 	usbnet_cdc_update_filter(dev);
 
-	return 0;
-
-bad_desc:
-	dev_info(&dev->udev->dev, "bad CDC descriptors\n");
-	return -ENODEV;
+bail_out:
+	return rv;
 }
-EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind);
 
 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
@@ -417,7 +434,7 @@ int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
 			< sizeof(struct cdc_state)));
 
-	status = usbnet_generic_cdc_bind(dev, intf);
+	status = usbnet_ether_cdc_bind(dev, intf);
 	if (status < 0)
 		return status;
 

drivers/net/usb/smsc95xx.c

@@ -681,7 +681,7 @@ static int smsc95xx_set_features(struct net_device *netdev,
 	if (ret < 0)
 		return ret;
 
-	if (features & NETIF_F_HW_CSUM)
+	if (features & NETIF_F_IP_CSUM)
 		read_buf |= Tx_COE_EN_;
 	else
 		read_buf &= ~Tx_COE_EN_;
@@ -1279,12 +1279,19 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	spin_lock_init(&pdata->mac_cr_lock);
 
+	/* LAN95xx devices do not alter the computed checksum of 0 to 0xffff.
+	 * RFC 2460, ipv6 UDP calculated checksum yields a result of zero must
+	 * be changed to 0xffff. RFC 768, ipv4 UDP computed checksum is zero,
+	 * it is transmitted as all ones. The zero transmitted checksum means
+	 * transmitter generated no checksum. Hence, enable csum offload only
+	 * for ipv4 packets.
+	 */
 	if (DEFAULT_TX_CSUM_ENABLE)
-		dev->net->features |= NETIF_F_HW_CSUM;
+		dev->net->features |= NETIF_F_IP_CSUM;
 	if (DEFAULT_RX_CSUM_ENABLE)
 		dev->net->features |= NETIF_F_RXCSUM;
 
-	dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+	dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
 
 	smsc95xx_init_mac_address(dev);
 

drivers/net/virtio_net.c

@@ -1989,6 +1989,7 @@ static const struct net_device_ops virtnet_netdev = {
 	.ndo_poll_controller = virtnet_netpoll,
 #endif
 	.ndo_xdp		= virtnet_xdp,
+	.ndo_features_check	= passthru_features_check,
 };
 
 static void virtnet_config_changed_work(struct work_struct *work)

drivers/nvme/host/core.c

@@ -925,6 +925,29 @@ static int nvme_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 }
 
 #ifdef CONFIG_BLK_DEV_INTEGRITY
+static void nvme_prep_integrity(struct gendisk *disk, struct nvme_id_ns *id,
+		u16 bs)
+{
+	struct nvme_ns *ns = disk->private_data;
+	u16 old_ms = ns->ms;
+	u8 pi_type = 0;
+
+	ns->ms = le16_to_cpu(id->lbaf[id->flbas & NVME_NS_FLBAS_LBA_MASK].ms);
+	ns->ext = ns->ms && (id->flbas & NVME_NS_FLBAS_META_EXT);
+
+	/* PI implementation requires metadata equal t10 pi tuple size */
+	if (ns->ms == sizeof(struct t10_pi_tuple))
+		pi_type = id->dps & NVME_NS_DPS_PI_MASK;
+
+	if (blk_get_integrity(disk) &&
+	    (ns->pi_type != pi_type || ns->ms != old_ms ||
+	     bs != queue_logical_block_size(disk->queue) ||
+	     (ns->ms && ns->ext)))
+		blk_integrity_unregister(disk);
+
+	ns->pi_type = pi_type;
+}
+
 static void nvme_init_integrity(struct nvme_ns *ns)
 {
 	struct blk_integrity integrity;
@@ -951,6 +974,10 @@ static void nvme_init_integrity(struct nvme_ns *ns)
 	blk_queue_max_integrity_segments(ns->queue, 1);
 }
 #else
+static void nvme_prep_integrity(struct gendisk *disk, struct nvme_id_ns *id,
+		u16 bs)
+{
+}
 static void nvme_init_integrity(struct nvme_ns *ns)
 {
 }
@@ -997,37 +1024,22 @@ static int nvme_revalidate_ns(struct nvme_ns *ns, struct nvme_id_ns **id)
 static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
 {
 	struct nvme_ns *ns = disk->private_data;
-	u8 lbaf, pi_type;
-	u16 old_ms;
-	unsigned short bs;
-
-	old_ms = ns->ms;
-	lbaf = id->flbas & NVME_NS_FLBAS_LBA_MASK;
-	ns->lba_shift = id->lbaf[lbaf].ds;
-	ns->ms = le16_to_cpu(id->lbaf[lbaf].ms);
-	ns->ext = ns->ms && (id->flbas & NVME_NS_FLBAS_META_EXT);
+	u16 bs;
 
 	/*
 	 * If identify namespace failed, use default 512 byte block size so
 	 * block layer can use before failing read/write for 0 capacity.
 	 */
+	ns->lba_shift = id->lbaf[id->flbas & NVME_NS_FLBAS_LBA_MASK].ds;
 	if (ns->lba_shift == 0)
 		ns->lba_shift = 9;
 	bs = 1 << ns->lba_shift;
-	/* XXX: PI implementation requires metadata equal t10 pi tuple size */
-	pi_type = ns->ms == sizeof(struct t10_pi_tuple) ?
-					id->dps & NVME_NS_DPS_PI_MASK : 0;
 
 	blk_mq_freeze_queue(disk->queue);
-	if (blk_get_integrity(disk) && (ns->pi_type != pi_type ||
-				ns->ms != old_ms ||
-				bs != queue_logical_block_size(disk->queue) ||
-				(ns->ms && ns->ext)))
-		blk_integrity_unregister(disk);
 
-	ns->pi_type = pi_type;
+	if (ns->ctrl->ops->flags & NVME_F_METADATA_SUPPORTED)
+		nvme_prep_integrity(disk, id, bs);
 	blk_queue_logical_block_size(ns->queue, bs);
-
 	if (ns->ms && !blk_get_integrity(disk) && !ns->ext)
 		nvme_init_integrity(ns);
 	if (ns->ms && !(ns->ms == 8 && ns->pi_type) && !blk_get_integrity(disk))
@@ -1605,7 +1617,7 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
 	}
 	memcpy(ctrl->psd, id->psd, sizeof(ctrl->psd));
 
-	if (ctrl->ops->is_fabrics) {
+	if (ctrl->ops->flags & NVME_F_FABRICS) {
 		ctrl->icdoff = le16_to_cpu(id->icdoff);
 		ctrl->ioccsz = le32_to_cpu(id->ioccsz);
 		ctrl->iorcsz = le32_to_cpu(id->iorcsz);
@@ -2098,7 +2110,6 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 		if (ns->ndev)
 			nvme_nvm_unregister_sysfs(ns);
 		del_gendisk(ns->disk);
-		blk_mq_abort_requeue_list(ns->queue);
 		blk_cleanup_queue(ns->queue);
 	}
 
@@ -2436,8 +2447,16 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl)
 			continue;
 		revalidate_disk(ns->disk);
 		blk_set_queue_dying(ns->queue);
-		blk_mq_abort_requeue_list(ns->queue);
-		blk_mq_start_stopped_hw_queues(ns->queue, true);
+
+		/*
+		 * Forcibly start all queues to avoid having stuck requests.
+		 * Note that we must ensure the queues are not stopped
+		 * when the final removal happens.
+		 */
+		blk_mq_start_hw_queues(ns->queue);
+
+		/* draining requests in requeue list */
+		blk_mq_kick_requeue_list(ns->queue);
 	}
 	mutex_unlock(&ctrl->namespaces_mutex);
 }