Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata into for-3.20

09c32aaa3683 ("ahci_xgene: Fix the dma state machine lockup for the
ATA_CMD_SMART PIO mode command.") missed 3.19 release.  Fold it into
for-3.20.

Signed-off-by: Tejun Heo <tj@kernel.org>

drivers/ata/Kconfig

@@ -835,6 +835,7 @@ config PATA_AT32
 config PATA_AT91
 	tristate "PATA support for AT91SAM9260"
 	depends on ARM && SOC_AT91SAM9
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 

drivers/ata/ahci.c

@@ -325,7 +325,6 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
-	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */

drivers/ata/ahci_xgene.c

@@ -213,7 +213,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
 	}
 
 	if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) ||
-	    (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET)))
+	    (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) ||
+	    (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART)))
 		xgene_ahci_restart_engine(ap);
 
 	rc = ahci_qc_issue(qc);

drivers/ata/libahci.c

@@ -2003,7 +2003,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
 
 	devslp = readl(port_mmio + PORT_DEVSLP);
 	if (!(devslp & PORT_DEVSLP_DSP)) {
-		dev_err(ap->host->dev, "port does not support device sleep\n");
+		dev_info(ap->host->dev, "port does not support device sleep\n");
 		return;
 	}
 

drivers/ata/libata-core.c

@@ -4206,10 +4206,33 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* devices that don't properly handle queued TRIM commands */
-	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Crucial_CT???M500SSD*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Micron_M550*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Crucial_CT*M550SSD*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Micron_M[56]*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Crucial_CT*SSD*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+
+	/*
+	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
+	 * (Return Zero After Trim) flags in the ATA Command Set are
+	 * unreliable in the sense that they only define what happens if
+	 * the device successfully executed the DSM TRIM command. TRIM
+	 * is only advisory, however, and the device is free to silently
+	 * ignore all or parts of the request.
+	 *
+	 * Whitelist drives that are known to reliably return zeroes
+	 * after TRIM.
+	 */
+
+	/*
+	 * The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude
+	 * that model before whitelisting all other intel SSDs.
+	 */
+	{ "INTEL*SSDSC2MH*",		NULL,	0, },
+
+	{ "INTEL*SSD*", 		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "SSD*INTEL*",			NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "SAMSUNG*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "ST[1248][0248]0[FH]*",	NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
 	/*
 	 * Some WD SATA-I drives spin up and down erratically when the link
@@ -4721,7 +4744,10 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
 		return NULL;
 
 	for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) {
-		tag = tag < max_queue ? tag : 0;
+		if (ap->flags & ATA_FLAG_LOWTAG)
+			tag = i;
+		else
+			tag = tag < max_queue ? tag : 0;
 
 		/* the last tag is reserved for internal command. */
 		if (tag == ATA_TAG_INTERNAL)

drivers/ata/libata-scsi.c

@@ -2532,13 +2532,15 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 		rbuf[15] = lowest_aligned;
 
 		if (ata_id_has_trim(args->id)) {
-			rbuf[14] |= 0x80; /* TPE */
+			rbuf[14] |= 0x80; /* LBPME */
 
-			if (ata_id_has_zero_after_trim(args->id))
-				rbuf[14] |= 0x40; /* TPRZ */
+			if (ata_id_has_zero_after_trim(args->id) &&
+			    dev->horkage & ATA_HORKAGE_ZERO_AFTER_TRIM) {
+				ata_dev_info(dev, "Enabling discard_zeroes_data\n");
+				rbuf[14] |= 0x40; /* LBPRZ */
+			}
 		}
 	}
-
 	return 0;
 }
 

drivers/ata/libata-sff.c

@@ -1333,7 +1333,19 @@ void ata_sff_flush_pio_task(struct ata_port *ap)
 	DPRINTK("ENTER\n");
 
 	cancel_delayed_work_sync(&ap->sff_pio_task);
+
+	/*
+	 * We wanna reset the HSM state to IDLE.  If we do so without
+	 * grabbing the port lock, critical sections protected by it which
+	 * expect the HSM state to stay stable may get surprised.  For
+	 * example, we may set IDLE in between the time
+	 * __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls
+	 * ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().
+	 */
+	spin_lock_irq(ap->lock);
 	ap->hsm_task_state = HSM_ST_IDLE;
+	spin_unlock_irq(ap->lock);
+
 	ap->sff_pio_task_link = NULL;
 
 	if (ata_msg_ctl(ap))

drivers/ata/sata_sil24.c

@@ -246,7 +246,7 @@ enum {
 	/* host flags */
 	SIL24_COMMON_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
-				  ATA_FLAG_AN | ATA_FLAG_PMP,
+				  ATA_FLAG_AN | ATA_FLAG_PMP | ATA_FLAG_LOWTAG,
 	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
 
 	IRQ_STAT_4PORTS		= 0xf,

include/linux/libata.h

@@ -231,6 +231,7 @@ enum {
 	ATA_FLAG_SW_ACTIVITY	= (1 << 22), /* driver supports sw activity
 					      * led */
 	ATA_FLAG_NO_DIPM	= (1 << 23), /* host not happy with DIPM */
+	ATA_FLAG_LOWTAG		= (1 << 24), /* host wants lowest available tag */
 
 	/* bits 24:31 of ap->flags are reserved for LLD specific flags */
 
@@ -422,6 +423,7 @@ enum {
 	ATA_HORKAGE_NO_NCQ_TRIM	= (1 << 19),	/* don't use queued TRIM */
 	ATA_HORKAGE_NOLPM	= (1 << 20),	/* don't use LPM */
 	ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21),	/* some WDs have broken LPM */
+	ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */