mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants

Both Bay and Cherry Trail devices may be used together with a Crystal Cove
PMIC. Each platform has its own variant of the PMIC, which both use the
same ACPI HID, but they are not 100% compatible.

This commits makes the intel_soc_pmic_core code check the _HRV of the
ACPI-firmware-node and selects intel_soc_pmic_config_byt_crc resp.
intel_soc_pmic_config_cht_crc based on this.

This fixes the Bay Trail specific ACPI OpRegion code causing problems
on Cherry Trail devices. Specifically this was causing the external
microsd slot on a Dell Venue 8 5855 (Cherry Trail version) to not work
and the eMMC to become unreliable and throw lots of errors.

Fixes: 5165238460 ("mfd: intel_soc_pmic: Core driver")
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/Kconfig

@@ -467,12 +467,12 @@ config LPC_SCH
 
 config INTEL_SOC_PMIC
 	bool "Support for Crystal Cove PMIC"
-	depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
+	depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
 	depends on X86 || COMPILE_TEST
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	select I2C_DESIGNWARE_PLATFORM if ACPI
+	select I2C_DESIGNWARE_PLATFORM
 	help
 	  Select this option to enable support for Crystal Cove PMIC
 	  on some Intel SoC systems. The PMIC provides ADC, GPIO,

drivers/mfd/intel_soc_pmic_core.c

@@ -16,6 +16,7 @@
  * Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/mfd/core.h>
 #include <linux/i2c.h>
@@ -28,6 +29,10 @@
 #include <linux/pwm.h>
 #include "intel_soc_pmic_core.h"
 
+/* Crystal Cove PMIC shares same ACPI ID between different platforms */
+#define BYT_CRC_HRV		2
+#define CHT_CRC_HRV		3
+
 /* Lookup table for the Panel Enable/Disable line as GPIO signals */
 static struct gpiod_lookup_table panel_gpio_table = {
 	/* Intel GFX is consumer */
@@ -48,16 +53,33 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
 				    const struct i2c_device_id *i2c_id)
 {
 	struct device *dev = &i2c->dev;
-	const struct acpi_device_id *id;
 	struct intel_soc_pmic_config *config;
 	struct intel_soc_pmic *pmic;
+	unsigned long long hrv;
+	acpi_status status;
 	int ret;
 
-	id = acpi_match_device(dev->driver->acpi_match_table, dev);
-	if (!id || !id->driver_data)
+	/*
+	 * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry
+	 * Trail version, use _HRV to differentiate between the 2.
+	 */
+	status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
+	if (ACPI_FAILURE(status)) {
+		dev_err(dev, "Failed to get PMIC hardware revision\n");
 		return -ENODEV;
-
-	config = (struct intel_soc_pmic_config *)id->driver_data;
+	}
+
+	switch (hrv) {
+	case BYT_CRC_HRV:
+		config = &intel_soc_pmic_config_byt_crc;
+		break;
+	case CHT_CRC_HRV:
+		config = &intel_soc_pmic_config_cht_crc;
+		break;
+	default:
+		dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv);
+		config = &intel_soc_pmic_config_byt_crc;
+	}
 
 	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
 	if (!pmic)
@@ -157,7 +179,7 @@ MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id);
 
 #if defined(CONFIG_ACPI)
 static const struct acpi_device_id intel_soc_pmic_acpi_match[] = {
-	{"INT33FD", (kernel_ulong_t)&intel_soc_pmic_config_byt_crc},
+	{ "INT33FD" },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match);