ab8500-charger: Add support for autopower on AB8505 and AB9540

Accessing autopower register fails on the AB8505 and ab9540 as
the fallback software control register has moved.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Reviewed-by: Nicolas GUION <nicolas.guion@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>

drivers/power/ab8500_charger.c

@@ -95,6 +95,8 @@
 
 #define CHG_WD_INTERVAL			(60 * HZ)
 
+#define AB8500_SW_CONTROL_FALLBACK	0x03
+
 /* UsbLineStatus register - usb types */
 enum ab8500_charger_link_status {
 	USB_STAT_NOT_CONFIGURED,
@@ -312,42 +314,58 @@ static enum power_supply_property ab8500_charger_usb_props[] = {
 static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
 		bool fallback)
 {
+	u8 val;
 	u8 reg;
+	u8 bank;
+	u8 bit;
 	int ret;
 
 	dev_dbg(di->dev, "SW Fallback: %d\n", fallback);
 
+	if (is_ab8500(di->parent)) {
+		bank = 0x15;
+		reg = 0x0;
+		bit = 3;
+	} else {
+		bank = AB8500_SYS_CTRL1_BLOCK;
+		reg = AB8500_SW_CONTROL_FALLBACK;
+		bit = 0;
+	}
+
 	/* read the register containing fallback bit */
-	ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, &reg);
-	if (ret) {
-		dev_err(di->dev, "%d write failed\n", __LINE__);
+	ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%d read failed\n", __LINE__);
 		return;
 	}
 
-	/* enable the OPT emulation registers */
-	ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
-	if (ret) {
-		dev_err(di->dev, "%d write failed\n", __LINE__);
-		return;
+	if (is_ab8500(di->parent)) {
+		/* enable the OPT emulation registers */
+		ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+		if (ret) {
+			dev_err(di->dev, "%d write failed\n", __LINE__);
+			goto disable_otp;
+		}
 	}
 
 	if (fallback)
-		reg |= 0x8;
+		val |= (1 << bit);
 	else
-		reg &= ~0x8;
+		val &= ~(1 << bit);
 
 	/* write back the changed fallback bit value to register */
-	ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg);
+	ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
 	if (ret) {
 		dev_err(di->dev, "%d write failed\n", __LINE__);
-		return;
 	}
 
-	/* disable the set OTP registers again */
-	ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
-	if (ret) {
-		dev_err(di->dev, "%d write failed\n", __LINE__);
-		return;
+disable_otp:
+	if (is_ab8500(di->parent)) {
+		/* disable the set OTP registers again */
+		ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+		if (ret) {
+			dev_err(di->dev, "%d write failed\n", __LINE__);
+		}
 	}
 }