Merge tag 'hwmon-for-linus-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix potential Spectre v1 in nct6775

 - Add error checking to adt7475 driver

 - Fix reading shunt resistor value in ina2xx driver

* tag 'hwmon-for-linus-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6775) Fix potential Spectre v1
  hwmon: (adt7475) Make adt7475_read_word() return errors
  hwmon: (adt7475) Potential error pointer dereferences
  hwmon: (ina2xx) fix sysfs shunt resistor read access

Documentation/hwmon/ina2xx

@@ -32,7 +32,7 @@ Supported chips:
     Datasheet: Publicly available at the Texas Instruments website
                http://www.ti.com/
 
-Author: Lothar Felten <l-felten@ti.com>
+Author: Lothar Felten <lothar.felten@gmail.com>
 
 Description
 -----------

drivers/hwmon/adt7475.c

@@ -302,14 +302,18 @@ static inline u16 volt2reg(int channel, long volt, u8 bypass_attn)
 	return clamp_val(reg, 0, 1023) & (0xff << 2);
 }
 
-static u16 adt7475_read_word(struct i2c_client *client, int reg)
+static int adt7475_read_word(struct i2c_client *client, int reg)
 {
-	u16 val;
+	int val1, val2;
 
-	val = i2c_smbus_read_byte_data(client, reg);
-	val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8);
+	val1 = i2c_smbus_read_byte_data(client, reg);
+	if (val1 < 0)
+		return val1;
+	val2 = i2c_smbus_read_byte_data(client, reg + 1);
+	if (val2 < 0)
+		return val2;
 
-	return val;
+	return val1 | (val2 << 8);
 }
 
 static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
@@ -962,13 +966,14 @@ static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
 {
 	struct adt7475_data *data = adt7475_update_device(dev);
 	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
-	int i = clamp_val(data->range[sattr->index] & 0xf, 0,
-			  ARRAY_SIZE(pwmfreq_table) - 1);
+	int idx;
 
 	if (IS_ERR(data))
 		return PTR_ERR(data);
+	idx = clamp_val(data->range[sattr->index] & 0xf, 0,
+			ARRAY_SIZE(pwmfreq_table) - 1);
 
-	return sprintf(buf, "%d\n", pwmfreq_table[i]);
+	return sprintf(buf, "%d\n", pwmfreq_table[idx]);
 }
 
 static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
@@ -1004,6 +1009,10 @@ static ssize_t pwm_use_point2_pwm_at_crit_show(struct device *dev,
 					char *buf)
 {
 	struct adt7475_data *data = adt7475_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
 	return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY));
 }
 

drivers/hwmon/ina2xx.c

@@ -17,7 +17,7 @@
  * Bi-directional Current/Power Monitor with I2C Interface
  * Datasheet: http://www.ti.com/product/ina230
  *
- * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com>
  * Thanks to Jan Volkering
  *
  * This program is free software; you can redistribute it and/or modify
@@ -329,6 +329,15 @@ static int ina2xx_set_shunt(struct ina2xx_data *data, long val)
 	return 0;
 }
 
+static ssize_t ina2xx_show_shunt(struct device *dev,
+			      struct device_attribute *da,
+			      char *buf)
+{
+	struct ina2xx_data *data = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%li\n", data->rshunt);
+}
+
 static ssize_t ina2xx_store_shunt(struct device *dev,
 				  struct device_attribute *da,
 				  const char *buf, size_t count)
@@ -403,7 +412,7 @@ static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
 
 /* shunt resistance */
 static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR,
-			  ina2xx_show_value, ina2xx_store_shunt,
+			  ina2xx_show_shunt, ina2xx_store_shunt,
 			  INA2XX_CALIBRATION);
 
 /* update interval (ina226 only) */

drivers/hwmon/nct6775.c

@@ -63,6 +63,7 @@
 #include <linux/bitops.h>
 #include <linux/dmi.h>
 #include <linux/io.h>
+#include <linux/nospec.h>
 #include "lm75.h"
 
 #define USE_ALTERNATE
@@ -2689,6 +2690,7 @@ store_pwm_weight_temp_sel(struct device *dev, struct device_attribute *attr,
 		return err;
 	if (val > NUM_TEMP)
 		return -EINVAL;
+	val = array_index_nospec(val, NUM_TEMP + 1);
 	if (val && (!(data->have_temp & BIT(val - 1)) ||
 		    !data->temp_src[val - 1]))
 		return -EINVAL;

include/linux/platform_data/ina2xx.h

@@ -1,7 +1,7 @@
 /*
  * Driver for Texas Instruments INA219, INA226 power monitor chips
  *
- * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as