Merge tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
SoC along with two boards.  A lot of Samsung people contributed into this
but the final work and commits were done by Chanwoo Choi.

This means that for v4.10 we got:
1. Exynos5433 DTSI.
2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.

* tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
  arm64: dts: exynos: Add dtsi files for Samsung Exynos5433 64bit SoC

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt

@@ -15,6 +15,8 @@ Required root node properties:
 	- "samsung,xyref5260"	- for Exynos5260-based Samsung board.
 	- "samsung,smdk5410"	- for Exynos5410-based Samsung SMDK5410 eval board.
 	- "samsung,smdk5420"	- for Exynos5420-based Samsung SMDK5420 eval board.
+	- "samsung,tm2"		- for Exynos5433-based Samsung TM2 board.
+	- "samsung,tm2e"	- for Exynos5433-based Samsung TM2E board.
 	- "samsung,sd5v1"	- for Exynos5440-based Samsung board.
 	- "samsung,ssdk5440"	- for Exynos5440-based Samsung board.
 

arch/arm64/boot/dts/exynos/Makefile

@@ -1,4 +1,7 @@
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	exynos5433-tm2.dtb	\
+	exynos5433-tm2e.dtb	\
+	exynos7-espresso.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi

@@ -0,0 +1,794 @@
+/*
+ * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE		0
+#define PIN_PULL_DOWN		1
+#define PIN_PULL_UP		3
+
+#define PIN_DRV_LV1		0
+#define PIN_DRV_LV2		2
+#define PIN_DRV_LV3		1
+#define PIN_DRV_LV4		3
+
+#define PIN_IN			0
+#define PIN_OUT			1
+#define PIN_FUNC1		2
+
+#define PIN(_func, _pin, _pull, _drv)			\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <PIN_ ##_func>;	\
+		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 0>, <GIC_SPI 1 0>, <GIC_SPI 2 0>,
+			<GIC_SPI 3 0>, <GIC_SPI 4 0>, <GIC_SPI 5 0>,
+			<GIC_SPI 6 0>, <GIC_SPI 7 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 0>, <GIC_SPI 9 0>, <GIC_SPI 10 0>,
+			<GIC_SPI 11 0>, <GIC_SPI 12 0>, <GIC_SPI 13 0>,
+			<GIC_SPI 14 0>, <GIC_SPI 15 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpz0: gpz0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+				"gpz0-4", "gpz0-5", "gpz0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart_aud_bus: uart-aud-bus {
+		samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_cpif {
+	gpv6: gpv6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_ese {
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_finger {
+	gpd5: gpd5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_fsys {
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr0: gpr0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_qrdy: sd0-qrdy {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	pcie_bus: pcie_bus {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk_output: sd2-clk-output {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd2_cmd_output: sd2-cmd-output {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+};
+
+&pinctrl_imem {
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_peric {
+	gpv7: gpv7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpd4-3", "gpd4-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_spi_pin0: fimc-is-spi-pin0 {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_spi_pin1: fimc-is-spi-pin1 {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_bus: uart0-bus {
+		samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_bus: uart2-bus {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+	};
+
+	uart1_bus: uart1-bus {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi3_bus: spi3-bus {
+		samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi4_bus: spi4-bus {
+		samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpc1-1", "gpc0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch0_i2c: fimc-is-ch0_i2c {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch0_mclk: fimc-is-ch0_mclk {
+		samsung,pins = "gpd7-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch1_i2c: fimc-is-ch1-i2c {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch1_mclk: fimc-is-ch1-mclk {
+		samsung,pins = "gpd7-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch2_i2c: fimc-is-ch2-i2c {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_ch2_mclk: fimc-is-ch2-mclk {
+		samsung,pins = "gpd7-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts

@@ -0,0 +1,974 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung TM2 board";
+	compatible = "samsung,tm2", "samsung,exynos5433";
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_cpif;
+		pinctrl3 = &pinctrl_ese;
+		pinctrl4 = &pinctrl_finger;
+		pinctrl5 = &pinctrl_fsys;
+		pinctrl6 = &pinctrl_imem;
+		pinctrl7 = &pinctrl_nfc;
+		pinctrl8 = &pinctrl_peric;
+		pinctrl9 = &pinctrl_touch;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		spi3 = &spi_3;
+		spi4 = &spi_4;
+	};
+
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x0 0x20000000 0x0 0xc0000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+		};
+
+		volume-up-key {
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume-up key";
+			debounce-interval = <10>;
+		};
+
+		volume-down-key {
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume-down key";
+			debounce-interval = <10>;
+		};
+
+		homepage-key {
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "homepage key";
+			debounce-interval = <10>;
+		};
+	};
+
+	i2c_max98504: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+			 &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max98504: max98504@31 {
+			compatible = "maxim,max98504";
+			reg = <0x31>;
+			maxim,rx-path = <1>;
+			maxim,tx-path = <1>;
+			maxim,tx-channel-mask = <3>;
+			maxim,tx-channel-source = <2>;
+		};
+	};
+
+	sound {
+		compatible = "samsung,tm2-audio";
+		audio-codec = <&wm5110>;
+		i2s-controller = <&i2s0>;
+		audio-amplifier = <&max98504>;
+		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+		model = "wm5110";
+		samsung,audio-routing =
+			/* Headphone */
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			/* Speaker */
+			"SPK", "SPKOUT",
+			"SPKOUT", "HPOUT2L",
+			"SPKOUT", "HPOUT2R",
+
+			/* Receiver */
+			"RCV", "HPOUT3L",
+			"RCV", "HPOUT3R";
+		status = "okay";
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+
+	thermistor-ap {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor-charger {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 2>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+	status = "okay";
+
+	i80-if-timings {
+	};
+};
+
+&dsi {
+	status = "okay";
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo7_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&te_irq>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				samsung,burst-clock-frequency = <512000000>;
+				samsung,esc-clock-frequency = <16000000>;
+			};
+		};
+	};
+};
+
+&hsi2c_0 {
+	status = "okay";
+	clock-frequency = <2500000>;
+
+	s2mps13-pmic@66 {
+		compatible = "samsung,s2mps13-pmic";
+		interrupt-parent = <&gpa0>;
+		interrupts = <7 IRQ_TYPE_NONE>;
+		reg = <0x66>;
+		samsung,s2mps11-wrstbi-ground;
+
+		s2mps13_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_0.9V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD1_E_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD10_DPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MIPI2L_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD18_MIPI2L_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD18_LLI_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD33_USB30_3.0V_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_INT_M_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_KFC_M_1.1V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_G3D_M_0.95V_AP";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDDQ_EFUSE";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "V_TFLASH_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "V_CODEC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDDA_1.8V_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "CAM_IO_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "CAM_SEN_CORE_1.2V_AP";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VT_CAM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "CAM_SEN_A2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "CAM_AF_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VCC_3.0V_LCD_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VCC_1.8V_LCD_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VT_CAM_2.8V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "TSP_AVDD_3.3V_AP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "TSP_VDD_1.85V_AP";
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VTOUCH_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VTOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VCC_1.8V_MHL_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2100000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "OIS_VM_2.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo36_reg: LDO36 {
+				regulator-name = "VSIL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo37_reg: LDO37 {
+				regulator-name = "VF_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VCC_3.0V_MOTOR_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo39_reg: LDO39 {
+				regulator-name = "V_HRM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo40_reg: LDO40 {
+				regulator-name = "V_HRM_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_EGL_1.0V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_KFC_1.0V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_INT_0.95V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_G3D_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VDD_MEM1_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VDD_LLDO_1.35V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_MLDO_2.0V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_mem2";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	max77843@66 {
+		compatible = "maxim,max77843";
+		interrupt-parent = <&gpa1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x66>;
+
+		muic: max77843-muic {
+			compatible = "maxim,max77843-muic";
+		};
+
+		regulators {
+			compatible = "maxim,max77843-regulator";
+			safeout1_reg: SAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			safeout2_reg: SAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <3150000>;
+			};
+		};
+
+		haptic: max77843-haptic {
+			compatible = "maxim,max77843-haptic";
+			haptic-supply = <&ldo38_reg>;
+			pwms = <&pwm 0 33670 0>;
+			pwm-names = "haptic";
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mshc_0 {
+	status = "okay";
+	num-slots = <1>;
+	non-removable;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 3>;
+	samsung,read-strobe-delay = <90>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+			&sd0_bus8 &sd0_rdqs>;
+	bus-width = <8>;
+	assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+	assigned-clock-rates = <800000000>;
+};
+
+&pinctrl_alive {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_alive>;
+
+	initial_alive: initial-state {
+		PIN(IN, gpa0-0, DOWN, LV1);
+		PIN(IN, gpa0-1, NONE, LV1);
+		PIN(IN, gpa0-2, DOWN, LV1);
+		PIN(IN, gpa0-3, NONE, LV1);
+		PIN(IN, gpa0-4, NONE, LV1);
+		PIN(IN, gpa0-5, DOWN, LV1);
+		PIN(IN, gpa0-6, NONE, LV1);
+		PIN(IN, gpa0-7, NONE, LV1);
+
+		PIN(IN, gpa1-0, UP, LV1);
+		PIN(IN, gpa1-1, NONE, LV1);
+		PIN(IN, gpa1-2, NONE, LV1);
+		PIN(IN, gpa1-3, DOWN, LV1);
+		PIN(IN, gpa1-4, DOWN, LV1);
+		PIN(IN, gpa1-5, NONE, LV1);
+		PIN(IN, gpa1-6, NONE, LV1);
+		PIN(IN, gpa1-7, NONE, LV1);
+
+		PIN(IN, gpa2-0, NONE, LV1);
+		PIN(IN, gpa2-1, NONE, LV1);
+		PIN(IN, gpa2-2, NONE, LV1);
+		PIN(IN, gpa2-3, DOWN, LV1);
+		PIN(IN, gpa2-4, NONE, LV1);
+		PIN(IN, gpa2-5, DOWN, LV1);
+		PIN(IN, gpa2-6, DOWN, LV1);
+		PIN(IN, gpa2-7, NONE, LV1);
+
+		PIN(IN, gpa3-0, DOWN, LV1);
+		PIN(IN, gpa3-1, DOWN, LV1);
+		PIN(IN, gpa3-2, NONE, LV1);
+		PIN(IN, gpa3-3, DOWN, LV1);
+		PIN(IN, gpa3-4, NONE, LV1);
+		PIN(IN, gpa3-5, DOWN, LV1);
+		PIN(IN, gpa3-6, DOWN, LV1);
+		PIN(IN, gpa3-7, DOWN, LV1);
+
+		PIN(IN, gpf1-0, NONE, LV1);
+		PIN(IN, gpf1-1, NONE, LV1);
+		PIN(IN, gpf1-2, DOWN, LV1);
+		PIN(IN, gpf1-4, UP, LV1);
+		PIN(OUT, gpf1-5, NONE, LV1);
+		PIN(IN, gpf1-6, DOWN, LV1);
+		PIN(IN, gpf1-7, DOWN, LV1);
+
+		PIN(IN, gpf2-0, DOWN, LV1);
+		PIN(IN, gpf2-1, DOWN, LV1);
+		PIN(IN, gpf2-2, DOWN, LV1);
+		PIN(IN, gpf2-3, DOWN, LV1);
+
+		PIN(IN, gpf3-0, DOWN, LV1);
+		PIN(IN, gpf3-1, DOWN, LV1);
+		PIN(IN, gpf3-2, NONE, LV1);
+		PIN(IN, gpf3-3, DOWN, LV1);
+
+		PIN(IN, gpf4-0, DOWN, LV1);
+		PIN(IN, gpf4-1, DOWN, LV1);
+		PIN(IN, gpf4-2, DOWN, LV1);
+		PIN(IN, gpf4-3, DOWN, LV1);
+		PIN(IN, gpf4-4, DOWN, LV1);
+		PIN(IN, gpf4-5, DOWN, LV1);
+		PIN(IN, gpf4-6, DOWN, LV1);
+		PIN(IN, gpf4-7, DOWN, LV1);
+
+		PIN(IN, gpf5-0, DOWN, LV1);
+		PIN(IN, gpf5-1, DOWN, LV1);
+		PIN(IN, gpf5-2, DOWN, LV1);
+		PIN(IN, gpf5-3, DOWN, LV1);
+		PIN(OUT, gpf5-4, NONE, LV1);
+		PIN(IN, gpf5-5, DOWN, LV1);
+		PIN(IN, gpf5-6, DOWN, LV1);
+		PIN(IN, gpf5-7, DOWN, LV1);
+	};
+
+	te_irq: te_irq {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <0xf>;
+	};
+};
+
+&pinctrl_cpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_cpif>;
+
+	initial_cpif: initial-state {
+		PIN(IN, gpv6-0, DOWN, LV1);
+		PIN(IN, gpv6-1, DOWN, LV1);
+	};
+};
+
+&pinctrl_ese {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_ese>;
+
+	initial_ese: initial-state {
+		PIN(IN, gpj2-0, DOWN, LV1);
+		PIN(IN, gpj2-1, DOWN, LV1);
+		PIN(IN, gpj2-2, DOWN, LV1);
+	};
+};
+
+&pinctrl_fsys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_fsys>;
+
+	initial_fsys: initial-state {
+		PIN(IN, gpr3-0, NONE, LV1);
+		PIN(IN, gpr3-1, DOWN, LV1);
+		PIN(IN, gpr3-2, DOWN, LV1);
+		PIN(IN, gpr3-3, DOWN, LV1);
+		PIN(IN, gpr3-7, NONE, LV1);
+	};
+};
+
+&pinctrl_imem {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_imem>;
+
+	initial_imem: initial-state {
+		PIN(IN, gpf0-0, UP, LV1);
+		PIN(IN, gpf0-1, UP, LV1);
+		PIN(IN, gpf0-2, DOWN, LV1);
+		PIN(IN, gpf0-3, UP, LV1);
+		PIN(IN, gpf0-4, DOWN, LV1);
+		PIN(IN, gpf0-5, NONE, LV1);
+		PIN(IN, gpf0-6, DOWN, LV1);
+		PIN(IN, gpf0-7, UP, LV1);
+	};
+};
+
+&pinctrl_nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_nfc>;
+
+	initial_nfc: initial-state {
+		PIN(IN, gpj0-2, DOWN, LV1);
+	};
+};
+
+&pinctrl_peric {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_peric>;
+
+	initial_peric: initial-state {
+		PIN(IN, gpv7-0, DOWN, LV1);
+		PIN(IN, gpv7-1, DOWN, LV1);
+		PIN(IN, gpv7-2, NONE, LV1);
+		PIN(IN, gpv7-3, DOWN, LV1);
+		PIN(IN, gpv7-4, DOWN, LV1);
+		PIN(IN, gpv7-5, DOWN, LV1);
+
+		PIN(IN, gpb0-4, DOWN, LV1);
+
+		PIN(IN, gpc0-2, DOWN, LV1);
+		PIN(IN, gpc0-5, DOWN, LV1);
+		PIN(IN, gpc0-7, DOWN, LV1);
+
+		PIN(IN, gpc1-1, DOWN, LV1);
+
+		PIN(IN, gpc3-4, NONE, LV1);
+		PIN(IN, gpc3-5, NONE, LV1);
+		PIN(IN, gpc3-6, NONE, LV1);
+		PIN(IN, gpc3-7, NONE, LV1);
+
+		PIN(OUT, gpg0-0, NONE, LV1);
+		PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+		PIN(IN, gpd2-5, DOWN, LV1);
+
+		PIN(IN, gpd4-0, NONE, LV1);
+		PIN(IN, gpd4-1, DOWN, LV1);
+		PIN(IN, gpd4-2, DOWN, LV1);
+		PIN(IN, gpd4-3, DOWN, LV1);
+		PIN(IN, gpd4-4, DOWN, LV1);
+
+		PIN(IN, gpd6-3, DOWN, LV1);
+
+		PIN(IN, gpd8-1, UP, LV1);
+
+		PIN(IN, gpg1-0, DOWN, LV1);
+		PIN(IN, gpg1-1, DOWN, LV1);
+		PIN(IN, gpg1-2, DOWN, LV1);
+		PIN(IN, gpg1-3, DOWN, LV1);
+		PIN(IN, gpg1-4, DOWN, LV1);
+
+		PIN(IN, gpg2-0, DOWN, LV1);
+		PIN(IN, gpg2-1, DOWN, LV1);
+
+		PIN(IN, gpg3-0, DOWN, LV1);
+		PIN(IN, gpg3-1, DOWN, LV1);
+		PIN(IN, gpg3-5, DOWN, LV1);
+		PIN(IN, gpg3-7, DOWN, LV1);
+	};
+};
+
+&pinctrl_touch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_touch>;
+
+	initial_touch: initial-state {
+		PIN(IN, gpj1-2, DOWN, LV1);
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mic {
+	status = "okay";
+
+	i80-if-timings {
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_3 {
+	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+	status = "okay";
+};
+
+&spi_1 {
+	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	wm5110: wm5110-codec@0 {
+		compatible = "wlf,wm5110";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		clocks = <&pmu_system_controller 0>,
+			<&s2mps13_osc S2MPS11_CLK_BT>;
+		clock-names = "mclk1", "mclk2";
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		wlf,micd-detect-debounce = <300>;
+		wlf,micd-bias-start-time = <0x1>;
+		wlf,micd-rate = <0x7>;
+		wlf,micd-dbtime = <0x1>;
+		wlf,micd-force-micbias;
+		wlf,micd-configs = <0x0 1 0>;
+		wlf,hpdet-channel = <1>;
+		wlf,gpsw = <0x1>;
+		wlf,inmode = <2 0 2 0>;
+
+		wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+		wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+		/* core supplies */
+		AVDD-supply = <&ldo18_reg>;
+		DBVDD1-supply = <&ldo18_reg>;
+		CPVDD-supply = <&ldo18_reg>;
+		DBVDD2-supply = <&ldo18_reg>;
+		DBVDD3-supply = <&ldo18_reg>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
+&timer {
+	clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_apollo {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_g3d {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&usbdrd30 {
+	vdd33-supply = <&ldo10_reg>;
+	vdd10-supply = <&ldo6_reg>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+	vbus-supply = <&safeout1_reg>;
+	status = "okay";
+};
+
+&xxti {
+	clock-frequency = <24000000>;
+};

arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts

@@ -0,0 +1,41 @@
+/*
+ * SAMSUNG Exynos5433 TM2E board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5433-tm2.dts"
+
+/ {
+	model = "Samsung TM2E board";
+	compatible = "samsung,tm2e", "samsung,exynos5433";
+};
+
+&ldo23_reg {
+	regulator-name = "CAM_SEN_CORE_1.025V_AP";
+	regulator-max-microvolt = <1050000>;
+};
+
+&ldo25_reg {
+	regulator-name = "UNUSED_LDO25";
+	regulator-always-off;
+};
+
+&ldo31_reg {
+	regulator-name = "TSP_VDD_1.8V_AP";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo38_reg {
+	regulator-name = "VCC_3.3V_MOTOR_AP";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};

arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi

@@ -0,0 +1,23 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <23>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_mux_addr = <6>;

arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi

@@ -0,0 +1,22 @@
+/*
+ * Device tree sources for Exynos5433 TMU sensor configuration
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <75>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <150>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;

arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi

@@ -0,0 +1,296 @@
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	atlas0_thermal: atlas0-thermal {
+		thermal-sensors = <&tmu_atlas0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas0_alert_0: atlas0-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_1: atlas0-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_2: atlas0-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_3: atlas0-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_4: atlas0-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_5: atlas0-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_6: atlas0-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1800MHz  */
+				trip = <&atlas0_alert_0>;
+				cooling-device = <&cpu4 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1700MHz  */
+				trip = <&atlas0_alert_1>;
+				cooling-device = <&cpu4 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1600MHz  */
+				trip = <&atlas0_alert_2>;
+				cooling-device = <&cpu4 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 1500MHz  */
+				trip = <&atlas0_alert_3>;
+				cooling-device = <&cpu4 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 1400MHz  */
+				trip = <&atlas0_alert_4>;
+				cooling-device = <&cpu4 5 7>;
+			};
+			map5 {
+				/* Set maximum frequencyas 1200MHz  */
+				trip = <&atlas0_alert_5>;
+				cooling-device = <&cpu4 7 9>;
+			};
+			map6 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&atlas0_alert_6>;
+				cooling-device = <&cpu4 9 14>;
+			};
+		};
+	};
+
+	atlas1_thermal: atlas1-thermal {
+		thermal-sensors = <&tmu_atlas1>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas1_alert_0: atlas1-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_1: atlas1-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_2: atlas1-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_3: atlas1-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_4: atlas1-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_5: atlas1-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_6: atlas1-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	g3d_thermal: g3d-thermal {
+		thermal-sensors = <&tmu_g3d>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			g3d_alert_0: g3d-alert-0 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_1: g3d-alert-1 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_2: g3d-alert-2 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_3: g3d-alert-3 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_4: g3d-alert-4 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_5: g3d-alert-5 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_6: g3d-alert-6 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	apollo_thermal: apollo-thermal {
+		thermal-sensors = <&tmu_apollo>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			apollo_alert_0: apollo-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_1: apollo-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_2: apollo-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_3: apollo-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_4: apollo-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_5: apollo-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_6: apollo-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1200MHz  */
+				trip = <&apollo_alert_2>;
+				cooling-device = <&cpu0 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1100MHz  */
+				trip = <&apollo_alert_3>;
+				cooling-device = <&cpu0 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&apollo_alert_4>;
+				cooling-device = <&cpu0 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 900MHz  */
+				trip = <&apollo_alert_5>;
+				cooling-device = <&cpu0 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 800MHz  */
+				trip = <&apollo_alert_6>;
+				cooling-device = <&cpu0 5 9>;
+			};
+		};
+	};
+
+	isp_thermal: isp-thermal {
+		thermal-sensors = <&tmu_isp>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			isp_alert_0: isp-alert-0 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_1: isp-alert-1 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_2: isp-alert-2 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_3: isp-alert-3 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_4: isp-alert-4 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_5: isp-alert-5 {
+				temperature = <105000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_6: isp-alert-6 {
+				temperature = <110000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+};
+};

arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -0,0 +1,1356 @@
+/*
+ * Samsung's Exynos5433 SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos5433 SoC device nodes are listed in this file.
+ * Exynos5433 based board files can include this file and provide
+ * values for board specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos5433.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos5433";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x100>;
+			clock-frequency = <1300000000>;
+			clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
+			clock-names = "apolloclk";
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x101>;
+			clock-frequency = <1300000000>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x102>;
+			clock-frequency = <1300000000>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x103>;
+			clock-frequency = <1300000000>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x0>;
+			clock-frequency = <1900000000>;
+			clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
+			clock-names = "atlasclk";
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+			clock-frequency = <1900000000>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+			clock-frequency = <1900000000>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+			clock-frequency = <1900000000>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	cluster_a53_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <925000>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	cluster_a57_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <912500>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <912500>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <937500>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500>;
+		};
+		opp@1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1087500>;
+		};
+		opp@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp@1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1137500>;
+		};
+		opp@1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1175000>;
+		};
+		opp@1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1212500>;
+		};
+		opp@1900000000 {
+			opp-hz = /bits/ 64 <1900000000>;
+			opp-microvolt = <1262500>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xC4000003>;
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&pmu_system_controller>;
+		offset = <0x400>; /* SWRESET */
+		mask = <0x1>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		xxti: xxti {
+			compatible = "fixed-clock";
+			clock-output-names = "oscclk";
+			#clock-cells = <0>;
+		};
+
+		cmu_top: clock-controller@10030000 {
+			compatible = "samsung,exynos5433-cmu-top";
+			reg = <0x10030000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll",
+				"sclk_mfc_pll",
+				"sclk_bus_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>,
+				<&cmu_mif CLK_SCLK_MFC_PLL>,
+				<&cmu_mif CLK_SCLK_BUS_PLL>;
+		};
+
+		cmu_cpif: clock-controller@10fc0000 {
+			compatible = "samsung,exynos5433-cmu-cpif";
+			reg = <0x10fc0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&xxti>;
+		};
+
+		cmu_mif: clock-controller@105b0000 {
+			compatible = "samsung,exynos5433-cmu-mif";
+			reg = <0x105b0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>;
+		};
+
+		cmu_peric: clock-controller@14c80000 {
+			compatible = "samsung,exynos5433-cmu-peric";
+			reg = <0x14c80000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_peris: clock-controller@0x10040000 {
+			compatible = "samsung,exynos5433-cmu-peris";
+			reg = <0x10040000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_fsys: clock-controller@156e0000 {
+			compatible = "samsung,exynos5433-cmu-fsys";
+			reg = <0x156e0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_ufs_mphy",
+				"div_aclk_fsys_200",
+				"sclk_pcie_100_fsys",
+				"sclk_ufsunipro_fsys",
+				"sclk_mmc2_fsys",
+				"sclk_mmc1_fsys",
+				"sclk_mmc0_fsys",
+				"sclk_usbhost30_fsys",
+				"sclk_usbdrd30_fsys";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_UFS_MPHY>,
+				<&cmu_top CLK_DIV_ACLK_FSYS_200>,
+				<&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+				<&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
+				<&cmu_top CLK_SCLK_MMC2_FSYS>,
+				<&cmu_top CLK_SCLK_MMC1_FSYS>,
+				<&cmu_top CLK_SCLK_MMC0_FSYS>,
+				<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+				<&cmu_top CLK_SCLK_USBDRD30_FSYS>;
+		};
+
+		cmu_g2d: clock-controller@12460000 {
+			compatible = "samsung,exynos5433-cmu-g2d";
+			reg = <0x12460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_g2d_266",
+				"aclk_g2d_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_G2D_266>,
+				<&cmu_top CLK_ACLK_G2D_400>;
+		};
+
+		cmu_disp: clock-controller@13b90000 {
+			compatible = "samsung,exynos5433-cmu-disp";
+			reg = <0x13b90000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_dsim1_disp",
+				"sclk_dsim0_disp",
+				"sclk_dsd_disp",
+				"sclk_decon_tv_eclk_disp",
+				"sclk_decon_vclk_disp",
+				"sclk_decon_eclk_disp",
+				"sclk_decon_tv_vclk_disp",
+				"aclk_disp_333";
+			clocks = <&xxti>,
+				<&cmu_mif CLK_SCLK_DSIM1_DISP>,
+				<&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				<&cmu_mif CLK_SCLK_DSD_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
+				<&cmu_mif CLK_ACLK_DISP_333>;
+		};
+
+		cmu_aud: clock-controller@114c0000 {
+			compatible = "samsung,exynos5433-cmu-aud";
+			reg = <0x114c0000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_bus0: clock-controller@13600000 {
+			compatible = "samsung,exynos5433-cmu-bus0";
+			reg = <0x13600000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus0_400";
+			clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+		};
+
+		cmu_bus1: clock-controller@14800000 {
+			compatible = "samsung,exynos5433-cmu-bus1";
+			reg = <0x14800000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus1_400";
+			clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+		};
+
+		cmu_bus2: clock-controller@13400000 {
+			compatible = "samsung,exynos5433-cmu-bus2";
+			reg = <0x13400000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_bus2_400";
+			clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
+		};
+
+		cmu_g3d: clock-controller@14aa0000 {
+			compatible = "samsung,exynos5433-cmu-g3d";
+			reg = <0x14aa0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_g3d_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
+		};
+
+		cmu_gscl: clock-controller@13cf0000 {
+			compatible = "samsung,exynos5433-cmu-gscl";
+			reg = <0x13cf0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_gscl_111",
+				"aclk_gscl_333";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_GSCL_111>,
+				<&cmu_top CLK_ACLK_GSCL_333>;
+		};
+
+		cmu_apollo: clock-controller@11900000 {
+			compatible = "samsung,exynos5433-cmu-apollo";
+			reg = <0x11900000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_apollo";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
+		};
+
+		cmu_atlas: clock-controller@11800000 {
+			compatible = "samsung,exynos5433-cmu-atlas";
+			reg = <0x11800000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_atlas";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
+		};
+
+		cmu_mscl: clock-controller@105d0000 {
+			compatible = "samsung,exynos5433-cmu-mscl";
+			reg = <0x150d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_jpeg_mscl",
+				"aclk_mscl_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_JPEG_MSCL>,
+				<&cmu_top CLK_ACLK_MSCL_400>;
+		};
+
+		cmu_mfc: clock-controller@15280000 {
+			compatible = "samsung,exynos5433-cmu-mfc";
+			reg = <0x15280000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_mfc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
+		};
+
+		cmu_hevc: clock-controller@14f80000 {
+			compatible = "samsung,exynos5433-cmu-hevc";
+			reg = <0x14f80000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_hevc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
+		};
+
+		cmu_isp: clock-controller@146d0000 {
+			compatible = "samsung,exynos5433-cmu-isp";
+			reg = <0x146d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_isp_dis_400",
+				"aclk_isp_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_ISP_DIS_400>,
+				<&cmu_top CLK_ACLK_ISP_400>;
+		};
+
+		cmu_cam0: clock-controller@120d0000 {
+			compatible = "samsung,exynos5433-cmu-cam0";
+			reg = <0x120d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_cam0_333",
+				"aclk_cam0_400",
+				"aclk_cam0_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_CAM0_333>,
+				<&cmu_top CLK_ACLK_CAM0_400>,
+				<&cmu_top CLK_ACLK_CAM0_552>;
+		};
+
+		cmu_cam1: clock-controller@145d0000 {
+			compatible = "samsung,exynos5433-cmu-cam1";
+			reg = <0x145d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_isp_uart_cam1",
+				"sclk_isp_spi1_cam1",
+				"sclk_isp_spi0_cam1",
+				"aclk_cam1_333",
+				"aclk_cam1_400",
+				"aclk_cam1_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_ISP_UART_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
+				<&cmu_top CLK_ACLK_CAM1_333>,
+				<&cmu_top CLK_ACLK_CAM1_400>,
+				<&cmu_top CLK_ACLK_CAM1_552>;
+		};
+
+		tmu_atlas0: tmu@10060000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <GIC_SPI 95 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_atlas1: tmu@10068000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10068000 0x200>;
+			interrupts = <GIC_SPI 96 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_g3d: tmu@10070000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10070000 0x200>;
+			interrupts = <GIC_SPI 99 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_apollo: tmu@10078000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10078000 0x200>;
+			interrupts = <GIC_SPI 115 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		tmu_isp: tmu@1007c000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x1007c000 0x200>;
+			interrupts = <GIC_SPI 94 0>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#include "exynos5433-tmu-sensor-conf.dtsi"
+			status = "disabled";
+		};
+
+		mct@101c0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101c0000 0x800>;
+			interrupts = <GIC_SPI 102 0>, <GIC_SPI 103 0>,
+				<GIC_SPI 104 0>, <GIC_SPI 105 0>,
+				<GIC_SPI 106 0>, <GIC_SPI 107 0>,
+				<GIC_SPI 108 0>, <GIC_SPI 109 0>,
+				<GIC_SPI 110 0>, <GIC_SPI 111 0>,
+				<GIC_SPI 112 0>, <GIC_SPI 113 0>;
+			clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupts = <GIC_SPI 16 0>;
+			};
+		};
+
+		pinctrl_aud: pinctrl@114b0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x114b0000 0x1000>;
+			interrupts = <GIC_SPI 68 0>;
+		};
+
+		pinctrl_cpif: pinctrl@10fe0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10fe0000 0x1000>;
+			interrupts = <GIC_SPI 179 0>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <GIC_SPI 413 0>;
+		};
+
+		pinctrl_finger: pinctrl@14cb0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cb0000 0x1000>;
+			interrupts = <GIC_SPI 414 0>;
+		};
+
+		pinctrl_fsys: pinctrl@15690000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <GIC_SPI 229 0>;
+		};
+
+		pinctrl_imem: pinctrl@11090000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x11090000 0x1000>;
+			interrupts = <GIC_SPI 325 0>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <GIC_SPI 441 0>;
+		};
+
+		pinctrl_peric: pinctrl@14cc0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cc0000 0x1100>;
+			interrupts = <GIC_SPI 440 0>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ce0000 0x1100>;
+			interrupts = <GIC_SPI 442 0>;
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos5433-pmu", "syscon";
+			reg = <0x105c0000 0x5008>;
+			#clock-cells = <1>;
+			clock-names = "clkout16";
+			clocks = <&xxti>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x11001000 0x1000>,
+				<0x11002000 0x2000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		mipi_phy: video-phy@105c0710 {
+			compatible = "samsung,exynos5433-mipi-video-phy";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			samsung,cam0-sysreg = <&syscon_cam0>;
+			samsung,cam1-sysreg = <&syscon_cam1>;
+			samsung,disp-sysreg = <&syscon_disp>;
+		};
+
+		decon: decon@13800000 {
+			compatible = "samsung,exynos5433-decon";
+			reg = <0x13800000 0x2104>;
+			clocks = <&cmu_disp CLK_PCLK_DECON>,
+				<&cmu_disp CLK_ACLK_DECON>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_XIU_DECON0X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_SCLK_DECON_VCLK>,
+				<&cmu_disp CLK_SCLK_DECON_ECLK>;
+			clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+				"aclk_xiu_decon0x", "pclk_smmu_decon0x",
+				"sclk_decon_vclk", "sclk_decon_eclk";
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <GIC_SPI 201 0>, <GIC_SPI 202 0>,
+				   <GIC_SPI 203 0>;
+			samsung,disp-sysreg = <&syscon_disp>;
+			status = "disabled";
+			iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+			iommu-names = "m0", "m1";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					decon_to_mic: endpoint {
+						remote-endpoint =
+							<&mic_to_decon>;
+					};
+				};
+			};
+		};
+
+		dsi: dsi@13900000 {
+			compatible = "samsung,exynos5433-mipi-dsi";
+			reg = <0x13900000 0xC0>;
+			interrupts = <GIC_SPI 205 0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+				<&cmu_disp CLK_SCLK_DSIM0>;
+			clock-names = "bus_clk",
+					"phyclk_mipidphy0_bitclkdiv8",
+					"phyclk_mipidphy0_rxclkesc0",
+					"sclk_rgb_vclk_to_dsim0",
+					"sclk_mipi";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_to_mic: endpoint {
+						remote-endpoint = <&mic_to_dsi>;
+					};
+				};
+			};
+		};
+
+		mic: mic@13930000 {
+			compatible = "samsung,exynos5433-mic";
+			reg = <0x13930000 0x48>;
+			clocks = <&cmu_disp CLK_PCLK_MIC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+			clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+			samsung,disp-syscon = <&syscon_disp>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mic_to_decon: endpoint {
+						remote-endpoint =
+							<&decon_to_mic>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mic_to_dsi: endpoint {
+						remote-endpoint = <&dsi_to_mic>;
+					};
+				};
+			};
+		};
+
+		syscon_disp: syscon@13b80000 {
+			compatible = "syscon";
+			reg = <0x13b80000 0x1010>;
+		};
+
+		syscon_cam0: syscon@120f0000 {
+			compatible = "syscon";
+			reg = <0x120f0000 0x1020>;
+		};
+
+		syscon_cam1: syscon@145f0000 {
+			compatible = "syscon";
+			reg = <0x145f0000 0x1038>;
+		};
+
+		sysmmu_decon0x: sysmmu@0x13a00000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a00000 0x1000>;
+			interrupts = <GIC_SPI 192 0>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON0X>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_decon1x: sysmmu@0x13a10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a10000 0x1000>;
+			interrupts = <GIC_SPI 194 0>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON1X>;
+			#iommu-cells = <0>;
+		};
+
+		serial_0: serial@14c10000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c10000 0x100>;
+			interrupts = <GIC_SPI 421 0>;
+			clocks = <&cmu_peric CLK_PCLK_UART0>,
+				<&cmu_peric CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <GIC_SPI 422 0>;
+			clocks = <&cmu_peric CLK_PCLK_UART1>,
+				<&cmu_peric CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <GIC_SPI 423 0>;
+			clocks = <&cmu_peric CLK_PCLK_UART2>,
+				<&cmu_peric CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@14d20000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d20000 0x100>;
+			interrupts = <GIC_SPI 432 0>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_1: spi@14d30000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d30000 0x100>;
+			interrupts = <GIC_SPI 433 0>;
+			dmas = <&pdma0 11>, <&pdma0 10>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_2: spi@14d40000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d40000 0x100>;
+			interrupts = <GIC_SPI 434 0>;
+			dmas = <&pdma0 13>, <&pdma0 12>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_3: spi@14d50000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d50000 0x100>;
+			interrupts = <GIC_SPI 447 0>;
+			dmas = <&pdma0 23>, <&pdma0 22>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI3>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_4: spi@14d00000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d00000 0x100>;
+			interrupts = <GIC_SPI 412 0>;
+			dmas = <&pdma0 25>, <&pdma0 24>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI4>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi4_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		adc: adc@14d10000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x14d10000 0x100>;
+			interrupts = <GIC_SPI 438 0>;
+			clock-names = "adc";
+			clocks = <&cmu_peric CLK_PCLK_ADCIF>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		pwm: pwm@14dd0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x14dd0000 0x100>;
+			interrupts = <GIC_SPI 416 0>, <GIC_SPI 417 0>,
+				<GIC_SPI 418 0>, <GIC_SPI 419 0>,
+				<GIC_SPI 420 0>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			clocks = <&cmu_peric CLK_PCLK_PWM>;
+			clock-names = "timers";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		hsi2c_0: hsi2c@14e40000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e40000 0x1000>;
+			interrupts = <GIC_SPI 428 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: hsi2c@14e50000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e50000 0x1000>;
+			interrupts = <GIC_SPI 429 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: hsi2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <GIC_SPI 430 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: hsi2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <GIC_SPI 431 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: hsi2c@14ec0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ec0000 0x1000>;
+			interrupts = <GIC_SPI 424 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: hsi2c@14ed0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ed0000 0x1000>;
+			interrupts = <GIC_SPI 425 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: hsi2c@14ee0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ee0000 0x1000>;
+			interrupts = <GIC_SPI 426 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: hsi2c@14ef0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ef0000 0x1000>;
+			interrupts = <GIC_SPI 427 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: hsi2c@14d90000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14d90000 0x1000>;
+			interrupts = <GIC_SPI 443 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: hsi2c@14da0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14da0000 0x1000>;
+			interrupts = <GIC_SPI 444 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: hsi2c@14de0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14de0000 0x1000>;
+			interrupts = <GIC_SPI 445 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: hsi2c@14df0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14df0000 0x1000>;
+			interrupts = <GIC_SPI 446 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		usbdrd30: usb@15400000  {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk";
+			assigned-clocks =
+				<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+				<&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+				<&cmu_top CLK_DIV_SCLK_USBDRD30>;
+			assigned-clock-parents =
+				<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+				<&cmu_top CLK_MOUT_BUS_PLL_USER>;
+			assigned-clock-rates = <0>, <0>, <66700000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			dwc3@15400000 {
+				compatible = "snps,dwc3";
+				reg = <0x15400000 0x10000>;
+				interrupts = <GIC_SPI 231 0>;
+				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd30_phy: phy@15500000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			assigned-clocks =
+				<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+				<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>;
+			assigned-clock-parents =
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>;
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30_phy: phy@15580000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15580000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			assigned-clocks =
+				<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+				<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>;
+			assigned-clock-parents =
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30: usb@15a00000 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk";
+			assigned-clocks =
+				<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+				<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+				<&cmu_top CLK_DIV_SCLK_USBHOST30>;
+			assigned-clock-parents =
+				<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+				<&cmu_top CLK_MOUT_BUS_PLL_USER>;
+			assigned-clock-rates = <0>, <0>, <66700000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			usbdrd_dwc3_0: dwc3@15a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x15a00000 0x10000>;
+				interrupts = <GIC_SPI 244 0>;
+				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		mshc_0: mshc@15540000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 225 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15540000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC0>,
+				<&cmu_fsys CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@15550000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 226 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15550000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC1>,
+				<&cmu_fsys CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_2: mshc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 227 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC2>,
+				<&cmu_fsys CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma0: pdma@15610000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x15610000 0x1000>;
+				interrupts = <GIC_SPI 228 0>;
+				clocks = <&cmu_fsys CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@15600000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x15600000 0x1000>;
+				interrupts = <GIC_SPI 246 0>;
+				clocks = <&cmu_fsys CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		audio-subsystem@11400000 {
+			compatible = "samsung,exynos5433-lpass";
+			reg = <0x11400000 0x100>, <0x11500000 0x08>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			adma: adma@11420000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11420000 0x1000>;
+				interrupts = <GIC_SPI 73 0>;
+				clocks = <&cmu_aud CLK_ACLK_DMAC>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			i2s0: i2s0@11440000 {
+				compatible = "samsung,exynos7-i2s";
+				reg = <0x11440000 0x100>;
+				dmas = <&adma 0 &adma 2>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 70 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_I2S_BCLK>;
+				clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_bus>;
+				status = "disabled";
+			};
+
+			serial_3: serial@11460000 {
+				compatible = "samsung,exynos5433-uart";
+				reg = <0x11460000 0x100>;
+				interrupts = <GIC_SPI 67 0>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+					<&cmu_aud CLK_SCLK_AUD_UART>;
+				clock-names = "uart", "clk_uart_baud0";
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart_aud_bus>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};
+
+#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"