Merge branch 'ib-extcon-usb-phy-4.14' into extcon-next

drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c

@@ -253,16 +253,16 @@ static void extcon_work(struct work_struct *work)
 	vbus = gpiod_get_value_cansleep(driver->vbus_gpiod);
 
 	if (!id && vbus) { /* Host connected */
-		extcon_set_cable_state_(driver->edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, true);
 		pr_debug("Host cable connected\n");
 		driver->data->new_state = EVT_HOST;
 		connect_change(driver);
 	} else if (id && !vbus) { /* Disconnected */
-		extcon_set_cable_state_(driver->edev, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(driver->edev, EXTCON_USB, false);
+		extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(driver->edev, EXTCON_USB, false);
 		pr_debug("Cable disconnected\n");
 	} else if (id && vbus) { /* Device connected */
-		extcon_set_cable_state_(driver->edev, EXTCON_USB, true);
+		extcon_set_state_sync(driver->edev, EXTCON_USB, true);
 		pr_debug("Device cable connected\n");
 		driver->data->new_state = EVT_DEVICE;
 		connect_change(driver);

drivers/phy/qualcomm/phy-qcom-usb-hs.c

@@ -155,12 +155,12 @@ static int qcom_usb_hs_phy_power_on(struct phy *phy)
 	}
 
 	if (uphy->vbus_edev) {
-		state = extcon_get_cable_state_(uphy->vbus_edev, EXTCON_USB);
+		state = extcon_get_state(uphy->vbus_edev, EXTCON_USB);
 		/* setup initial state */
 		qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
 					      uphy->vbus_edev);
-		ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
-				&uphy->vbus_notify);
+		ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
+				EXTCON_USB, &uphy->vbus_notify);
 		if (ret)
 			goto err_ulpi;
 	}
@@ -179,16 +179,8 @@ err_sleep:
 
 static int qcom_usb_hs_phy_power_off(struct phy *phy)
 {
-	int ret;
 	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
 
-	if (uphy->vbus_edev) {
-		ret = extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
-						 &uphy->vbus_notify);
-		if (ret)
-			return ret;
-	}
-
 	regulator_disable(uphy->v3p3);
 	regulator_disable(uphy->v1p8);
 	clk_disable_unprepare(uphy->sleep_clk);

drivers/phy/rockchip/phy-rockchip-inno-usb2.c

@@ -545,7 +545,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
 			rockchip_usb2phy_power_off(rport->phy);
 		/* fall through */
 	case OTG_STATE_B_IDLE:
-		if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) {
+		if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) {
 			dev_dbg(&rport->phy->dev, "usb otg host connect\n");
 			rport->state = OTG_STATE_A_HOST;
 			rockchip_usb2phy_power_on(rport->phy);
@@ -598,7 +598,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
 			rport->vbus_attached = vbus_attach;
 
 			if (notify_charger && rphy->edev) {
-				extcon_set_cable_state_(rphy->edev,
+				extcon_set_state_sync(rphy->edev,
 							cable, vbus_attach);
 				if (cable == EXTCON_CHG_USB_SDP)
 					extcon_set_state_sync(rphy->edev,
@@ -619,7 +619,7 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
 		sch_work = true;
 		break;
 	case OTG_STATE_A_HOST:
-		if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) {
+		if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) == 0) {
 			dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
 			rport->state = OTG_STATE_B_IDLE;
 			rockchip_usb2phy_power_off(rport->phy);
@@ -1006,8 +1006,8 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 	if (!IS_ERR(rphy->edev)) {
 		rport->event_nb.notifier_call = rockchip_otg_event;
 
-		ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST,
-					       &rport->event_nb);
+		ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
+					EXTCON_USB_HOST, &rport->event_nb);
 		if (ret)
 			dev_err(rphy->dev, "register USB HOST notifier failed\n");
 	}

drivers/usb/gadget/udc/snps_udc_plat.c

@@ -184,7 +184,7 @@ static int udc_plat_probe(struct platform_device *pdev)
 			goto exit_phy;
 		}
 
-		ret = extcon_get_cable_state_(udc->edev, EXTCON_USB);
+		ret = extcon_get_state(udc->edev, EXTCON_USB);
 		if (ret < 0) {
 			dev_err(dev, "Can't get cable state\n");
 			goto exit_extcon;
@@ -273,7 +273,7 @@ static int udc_plat_suspend(struct device *dev)
 	udc = dev_get_drvdata(dev);
 	stop_udc(udc);
 
-	if (extcon_get_cable_state_(udc->edev, EXTCON_USB) > 0) {
+	if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
 		dev_dbg(udc->dev, "device -> idle\n");
 		stop_udc(udc);
 	}
@@ -303,7 +303,7 @@ static int udc_plat_resume(struct device *dev)
 		return ret;
 	}
 
-	if (extcon_get_cable_state_(udc->edev, EXTCON_USB) > 0) {
+	if (extcon_get_state(udc->edev, EXTCON_USB) > 0) {
 		dev_dbg(udc->dev, "idle -> device\n");
 		start_udc(udc);
 	}

include/linux/extcon.h

@@ -422,15 +422,4 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
 {
 	return -EINVAL;
 }
-
-static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id)
-{
-	return extcon_get_state(edev, id);
-}
-
-static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
-				   bool cable_state)
-{
-	return extcon_set_state_sync(edev, id, cable_state);
-}
 #endif /* __LINUX_EXTCON_H__ */