mtd: lpc32xx: drop bitflip_threshold initialization

These drivers don't need to explicitly initialize their bitflip
thresholds. The comment is no longer correct, since nand_scan_tail()
performs this initialization as of the following commit:

    commit ea3b2ea24ef0f2ef9c6795b19cff456195b6728a
    Author: Shmulik Ladkani <shmulik@jungo.com>
    Date:   Fri Jun 8 18:29:06 2012 +0300

        mtd: nand: initialize bitflip_threshold prior to BBT scanning

(It seems there were some parallel efforts on writing/submitting these
drivers, and Shmulik's bug fix.)

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Roland Stigge <stigge@antcom.de>

drivers/mtd/nand/lpc32xx_mlc.c

@@ -721,12 +721,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	nand_chip->bbt_td = &lpc32xx_nand_bbt;
 	nand_chip->bbt_md = &lpc32xx_nand_bbt_mirror;
 
-	/* bitflip_threshold's default is defined as ecc_strength anyway.
-	 * Unfortunately, it is set only later at add_mtd_device(). Meanwhile
-	 * being 0, it causes bad block table scanning errors in
-	 * nand_scan_tail(), so preparing it here. */
-	mtd->bitflip_threshold = nand_chip->ecc.strength;
-
 	if (use_dma) {
 		res = lpc32xx_dma_setup(host);
 		if (res) {

drivers/mtd/nand/lpc32xx_slc.c

@@ -840,12 +840,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	chip->ecc.strength = 1;
 	chip->ecc.hwctl = lpc32xx_nand_ecc_enable;
 
-	/* bitflip_threshold's default is defined as ecc_strength anyway.
-	 * Unfortunately, it is set only later at add_mtd_device(). Meanwhile
-	 * being 0, it causes bad block table scanning errors in
-	 * nand_scan_tail(), so preparing it here already. */
-	mtd->bitflip_threshold = chip->ecc.strength;
-
 	/*
 	 * Allocate a large enough buffer for a single huge page plus
 	 * extra space for the spare area and ECC storage area