Merge tag 'fixes-for-v3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

  usb: fixes for v3.8-rc5

  Finally we have a build fix for fsl-mxc-udc UDC driver.

  We also have a fix for ep0 maxburst setting on DWC3
  which could confuse the HW if we tell it we had way
  too many streams on that endpoint when it _has_ to be
  only one.

  cppi_dma support for MUSB got a fix when running as a
  module. By dropping the wrong __init annotation, the
  function will be available even when we're modules and
  we're done with .init.text section.

  Last, but not least, we have a fix on FunctionFS which
  was causing a bug on our option parsing algorithm.

Documentation/DocBook/media/v4l/driver.xml

@@ -116,7 +116,7 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }
 
-static void __devexit
+static void
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
@@ -124,7 +124,7 @@ my_remove               (struct pci_dev *               pci_dev)
 	/* Describe me. */
 }
 
-static int __devinit
+static int
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,
 
 	.probe    = my_probe,
-	.remove   = __devexit_p (my_remove),
+	.remove   = my_remove,
 
 	/* Power management functions. */
 	.suspend  = my_suspend,

Documentation/PCI/pci-iov-howto.txt

@@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
 
 Following piece of code illustrates the usage of the SR-IOV API.
 
-static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);
 
@@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
 	return 0;
 }
 
-static void __devexit dev_remove(struct pci_dev *dev)
+static void dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);
 
@@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	__devexit_p(dev_remove),
+	.remove =	dev_remove,
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,

Documentation/PCI/pci.txt

@@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
 
-
-	__devinit	Device initialization code.
-			Identical to __init if the kernel is not compiled
-			with CONFIG_HOTPLUG, normal function otherwise.
-	__devexit	The same for __exit.
-
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
@@ -196,20 +190,6 @@ Tips on when/where to use the above attributes:
 
 	o Do not mark the struct pci_driver.
 
-	o The ID table array should be marked __devinitconst; this is done
-	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
-
-	o The probe() and remove() functions should be marked __devinit
-	  and __devexit respectively.  All initialization functions
-	  exclusively called by the probe() routine, can be marked __devinit.
-	  Ditto for remove() and __devexit.
-
-	o If mydriver_remove() is marked with __devexit(), then all address
-	  references to mydriver_remove must use __devexit_p(mydriver_remove)
-	  (in the struct pci_driver declaration for example).
-	  __devexit_p() will generate the function name _or_ NULL if the
-	  function will be discarded.  For an example, see drivers/net/tg3.c.
-
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.
 

Documentation/acpi/enumeration.txt

@@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= __devexit_p(mpu3050_remove),
+		.remove		= mpu3050_remove,
 		.id_table	= mpu3050_ids,
 	};
 

Documentation/devicetree/bindings/clock/imx23-clock.txt

@@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 32 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006c000 {

Documentation/devicetree/bindings/clock/imx25-clock.txt

@@ -146,10 +146,6 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
-	clock-output-names = ...
-			"uart_ipg",
-			"uart_serial",
-			...;
 };
 
 uart1: serial@43f90000 {

Documentation/devicetree/bindings/clock/imx28-clock.txt

@@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 45 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006a000 {

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -211,10 +211,6 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
-	clock-output-names = ...
-			     "uart_ipg",
-			     "uart_serial",
-			     ...;
 };
 
 uart1: serial@02020000 {

Documentation/devicetree/bindings/gpio/gpio-poweroff.txt

@@ -1,4 +1,19 @@
-GPIO line that should be set high/low to power off a device
+Driver a GPIO line that can be used to turn the power off.
+
+The driver supports both level triggered and edge triggered power off.
+At driver load time, the driver will request the given gpio line and
+install a pm_power_off handler. If the optional properties 'input' is
+not found, the GPIO line will be driven in the inactive
+state. Otherwise its configured as an input.
+
+When the pm_power_off is called, the gpio is configured as an output,
+and drive active, so triggering a level triggered power off
+condition. This will also cause an inactive->active edge condition, so
+triggering positive edge triggered power off. After a delay of 100ms,
+the GPIO is set to inactive, thus causing an active->inactive edge,
+triggering negative edge triggered power off. After another 100ms
+delay the GPIO is driver active again. If the power is still on and
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -13,10 +28,9 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
-
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+	gpios = <&gpio 4 0>;
 };

Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

@@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible	: "sirf,prima2-pinctrl"
+- reg		: Address range of the pinctrl registers
+- interrupts    : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+  group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+         uart {
+                 sirf,pins = "uart2grp";
+                 sirf,function = "uart2";
+         };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+         uart {
+                 sirf,pins = "uart2_nostreamctrlgrp";
+                 sirf,function = "uart2_nostreamctrl";
+         };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@0xb0070000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_noflow_pins_a>;
+}

Documentation/i2c/instantiating-devices

@@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):
 
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
-static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
+static int usb_hcd_nxp_probe(struct platform_device *pdev)
 {
 	(...)
 	struct i2c_adapter *i2c_adap;

Documentation/networking/ip-sysctl.txt

@@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER
 	The maximum number of bytes which may be used by packets
 	queued for each	unresolved address by other network layers.
 	(added in linux 3.3)
-	Seting negative value is meaningless and will retrun error.
+	Setting negative value is meaningless and will return error.
 	Default: 65536 Bytes(64KB)
 
 neigh/default/unres_qlen - INTEGER
@@ -215,7 +215,7 @@ tcp_ecn - INTEGER
 	Possible values are:
 		0 Disable ECN.  Neither initiate nor accept ECN.
 		1 Always request ECN on outgoing connection attempts.
-		2 Enable ECN when requested by incomming connections
+		2 Enable ECN when requested by incoming connections
 		  but do not request ECN on outgoing connections.
 	Default: 2
 
@@ -503,7 +503,7 @@ tcp_fastopen - INTEGER
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
 	will be retransmitted. Should not be higher than 255. Default value
-	is 6, which corresponds to 63seconds till the last restransmission
+	is 6, which corresponds to 63seconds till the last retransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.
 
@@ -1331,6 +1331,12 @@ force_tllao - BOOLEAN
 	race condition where the sender deletes the cached link-layer address
 	prior to receiving a response to a previous solicitation."
 
+ndisc_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+	0 - (default): do nothing
+	1 - Generate unsolicited neighbour advertisements when device is brought
+	    up or hardware address changes.
+
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.
@@ -1530,7 +1536,7 @@ cookie_hmac_alg - STRING
 	* sha1
 	* none
 	Ability to assign md5 or sha1 as the selected alg is predicated on the
-	configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and
+	configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
 	CONFIG_CRYPTO_SHA1).
 
 	Default: Dependent on configuration.  MD5 if available, else SHA1 if
@@ -1548,7 +1554,7 @@ rcvbuf_policy - INTEGER
 	blocking.
 
 	1: rcvbuf space is per association
-	0: recbuf space is per socket
+	0: rcvbuf space is per socket
 
 	Default: 0
 

Documentation/power/runtime_pm.txt

@@ -642,12 +642,13 @@ out the following operations:
   * During system suspend it calls pm_runtime_get_noresume() and
     pm_runtime_barrier() for every device right before executing the
     subsystem-level .suspend() callback for it.  In addition to that it calls
-    pm_runtime_disable() for every device right after executing the
-    subsystem-level .suspend() callback for it.
+    __pm_runtime_disable() with 'false' as the second argument for every device
+    right before executing the subsystem-level .suspend_late() callback for it.
 
   * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
-    for every device right before and right after executing the subsystem-level
-    .resume() callback for it, respectively.
+    for every device right after executing the subsystem-level .resume_early()
+    callback and right after executing the subsystem-level .resume() callback
+    for it, respectively.
 
 7. Generic subsystem callbacks
 

Documentation/rpmsg.txt

@@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
 	return 0;
 }
 
-static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev)
+static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
 {
 	dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
 }
@@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = {
 	.id_table	= rpmsg_driver_sample_id_table,
 	.probe		= rpmsg_sample_probe,
 	.callback	= rpmsg_sample_cb,
-	.remove		= __devexit_p(rpmsg_sample_remove),
+	.remove		= rpmsg_sample_remove,
 };
 
 static int __init init(void)

Documentation/spi/spi-summary

@@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers:
 		},
 
 		.probe		= CHIP_probe,
-		.remove		= __devexit_p(CHIP_remove),
+		.remove		= CHIP_remove,
 		.suspend	= CHIP_suspend,
 		.resume		= CHIP_resume,
 	};
@@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP".  Your probe() code
 might look like this unless you're creating a device which is managing
 a bus (appearing under /sys/class/spi_master).
 
-	static int __devinit CHIP_probe(struct spi_device *spi)
+	static int CHIP_probe(struct spi_device *spi)
 	{
 		struct CHIP			*chip;
 		struct CHIP_platform_data	*pdata;

Documentation/sysctl/kernel.txt

@@ -38,6 +38,7 @@ show up in /proc/sys/kernel:
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/debugging-modules.txt
 - modules_disabled
+- msg_next_id		      [ sysv ipc ]
 - msgmax
 - msgmnb
 - msgmni
@@ -62,7 +63,9 @@ show up in /proc/sys/kernel:
 - rtsig-max
 - rtsig-nr
 - sem
+- sem_next_id		      [ sysv ipc ]
 - sg-big-buff                 [ generic SCSI device (sg) ]
+- shm_next_id		      [ sysv ipc ]
 - shm_rmid_forced
 - shmall
 - shmmax                      [ sysv ipc ]
@@ -320,6 +323,22 @@ to false.
 
 ==============================================================
 
+msg_next_id, sem_next_id, and shm_next_id:
+
+These three toggles allows to specify desired id for next allocated IPC
+object: message, semaphore or shared memory respectively.
+
+By default they are equal to -1, which means generic allocation logic.
+Possible values to set are in range {0..INT_MAX}.
+
+Notes:
+1) kernel doesn't guarantee, that new object will have desired id. So,
+it's up to userspace, how to handle an object with "wrong" id.
+2) Toggle with non-default value will be set back to -1 by kernel after
+successful IPC object allocation.
+
+==============================================================
+
 nmi_watchdog:
 
 Enables/Disables the NMI watchdog on x86 systems. When the value is
@@ -542,6 +561,19 @@ are doing anyway :)
 
 ==============================================================
 
+shmall:
+
+This parameter sets the total amount of shared memory pages that
+can be used system wide. Hence, SHMALL should always be at least
+ceil(shmmax/PAGE_SIZE).
+
+If you are not sure what the default PAGE_SIZE is on your Linux
+system, you can run the following command:
+
+# getconf PAGE_SIZE
+
+==============================================================
+
 shmmax:
 
 This value can be used to query and set the run time limit

Documentation/video4linux/v4l2-framework.txt

@@ -174,8 +174,7 @@ The recommended approach is as follows:
 
 static atomic_t drv_instance = ATOMIC_INIT(0);
 
-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;

Documentation/zh_CN/video4linux/v4l2-framework.txt

@@ -182,8 +182,7 @@ int iterate(void *p)
 
 static atomic_t drv_instance = ATOMIC_INIT(0);
 
-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;

MAINTAINERS

@@ -228,7 +228,7 @@ S:	Maintained
 F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-M:	Joey Lee <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
@@ -449,6 +449,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
+F:	include/uapi/linux/agp*
 
 AHA152X SCSI DRIVER
 M:	"Juergen E. Fischer" <fischer@norbit.de>
@@ -589,6 +590,7 @@ M:	Jiri Kosina <jkosina@suse.cz>
 S:	Odd fixes
 F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
+F:	include/uapi/linux/apm_bios.h
 F:	drivers/char/apm-emulation.c
 
 APPLE BCM5974 MULTITOUCH DRIVER
@@ -646,7 +648,7 @@ F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	MAINTAINED
+S:	Maintained
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
@@ -1005,7 +1007,6 @@ F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
 F:	drivers/tty/serial/msm_serial.h
 F:	drivers/tty/serial/msm_serial.c
-F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
@@ -1069,7 +1070,6 @@ M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
-F:	arch/arm/common/time-acorn.c
 F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
 F:	arch/arm/include/asm/hardware/ioc.h
 F:	arch/arm/include/asm/hardware/iomd.h
@@ -1094,7 +1094,6 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
-F:	arch/arm/plat-s5p/
 F:	arch/arm/mach-s3c24*/
 F:	arch/arm/mach-s3c64xx/
 F:	drivers/*/*s3c2410*
@@ -1125,7 +1124,6 @@ M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	arch/arm/plat-s5p/dev-fimc*
 F:	arch/arm/plat-samsung/include/plat/*fimc*
 F:	drivers/media/platform/s5p-fimc/
 
@@ -1136,7 +1134,7 @@ M:	Jeongtae Park <jtp.park@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	arch/arm/plat-s5p/dev-mfc.c
+F:	arch/arm/plat-samsung/s5p-dev-mfc.c
 F:	drivers/media/platform/s5p-mfc/
 
 ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT
@@ -1254,7 +1252,7 @@ F:	drivers/video/vt8500lcdfb.*
 F:	drivers/video/wm8505fb*
 F:	drivers/video/wmt_ge_rops.*
 F:	drivers/tty/serial/vt8500_serial.c
-F:	drivers/rtc/rtc-vt8500-c
+F:	drivers/rtc/rtc-vt8500.c
 F:	drivers/mmc/host/wmt-sdmmc.c
 
 ARM/ZIPIT Z2 SUPPORT
@@ -1353,6 +1351,14 @@ W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
+WILOCITY WIL6210 WIRELESS DRIVER
+M:	Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
+L:	linux-wireless@vger.kernel.org
+L:	wil6210@qca.qualcomm.com
+S:	Supported
+W:	http://wireless.kernel.org/en/users/Drivers/wil6210
+F:	drivers/net/wireless/ath/wil6210/
+
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
@@ -1388,6 +1394,7 @@ W:	http://linux-atm.sourceforge.net
 S:	Maintained
 F:	drivers/atm/
 F:	include/linux/atm*
+F:	include/uapi/linux/atm*
 
 ATMEL AT91 / AT32 MCI DRIVER
 M:	Ludovic Desroches <ludovic.desroches@atmel.com>
@@ -1406,13 +1413,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
-F:	arch/arm/mach-at91/include/mach/at_hdmac.h
+F:	include/linux/platform_data/dma-atmel.h
 
 ATMEL ISI DRIVER
 M:	Josh Wu <josh.wu@atmel.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-F:	drivers/media/platform/atmel-isi.c
+F:	drivers/media/platform/soc_camera/atmel-isi.c
 F:	include/media/atmel-isi.h
 
 ATMEL LCDFB DRIVER
@@ -1467,6 +1474,7 @@ W:	http://people.redhat.com/sgrubb/audit/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
 S:	Maintained
 F:	include/linux/audit.h
+F:	include/uapi/linux/audit.h
 F:	kernel/audit*
 
 AUXILIARY DISPLAY DRIVERS
@@ -1497,7 +1505,7 @@ M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
-F:	include/linux/ax25.h
+F:	include/uapi/linux/ax25.h
 F:	include/net/ax25.h
 F:	net/ax25/
 
@@ -1558,7 +1566,7 @@ M:	"Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	Documentation/filesystems/bfs.txt
 F:	fs/bfs/
-F:	include/linux/bfs_fs.h
+F:	include/uapi/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
 M:	Mike Frysinger <vapier@gentoo.org>
@@ -1655,7 +1663,7 @@ L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 F:	drivers/net/bonding/
-F:	include/linux/if_bonding.h
+F:	include/uapi/linux/if_bonding.h
 
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Gary Zambrano <zambrano@broadcom.com>
@@ -1734,6 +1742,7 @@ L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	block/bsg.c
 F:	include/linux/bsg.h
+F:	include/uapi/linux/bsg.h
 
 BT87X AUDIO DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -1804,7 +1813,7 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/caif/
 F:	drivers/net/caif/
-F:	include/linux/caif/
+F:	include/uapi/linux/caif/
 F:	include/net/caif/
 F:	net/caif/
 
@@ -1825,11 +1834,11 @@ W:	http://gitorious.org/linux-can
 T:	git git://gitorious.org/linux-can/linux-can-next.git
 S:	Maintained
 F:	net/can/
-F:	include/linux/can.h
 F:	include/linux/can/core.h
-F:	include/linux/can/bcm.h
-F:	include/linux/can/raw.h
-F:	include/linux/can/gw.h
+F:	include/uapi/linux/can.h
+F:	include/uapi/linux/can/bcm.h
+F:	include/uapi/linux/can/raw.h
+F:	include/uapi/linux/can/gw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
@@ -1840,15 +1849,16 @@ T:	git git://gitorious.org/linux-can/linux-can-next.git
 S:	Maintained
 F:	drivers/net/can/
 F:	include/linux/can/dev.h
-F:	include/linux/can/error.h
-F:	include/linux/can/netlink.h
 F:	include/linux/can/platform/
+F:	include/uapi/linux/can/error.h
+F:	include/uapi/linux/can/netlink.h
 
 CAPABILITIES
 M:	Serge Hallyn <serge.hallyn@canonical.com>
 L:	linux-security-module@vger.kernel.org
 S:	Supported
 F:	include/linux/capability.h
+F:	include/uapi/linux/capability.h
 F:	security/capability.c
 F:	security/commoncap.c
 F:	kernel/capability.c
@@ -1861,6 +1871,7 @@ W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
 F:	arch/powerpc/include/asm/spu*.h
+F:	arch/powerpc/include/uapi/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
@@ -1909,7 +1920,7 @@ W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
-F:	include/linux/nl80211.h
+F:	include/uapi/linux/nl80211.h
 F:	include/net/cfg80211.h
 F:	net/wireless/*
 X:	net/wireless/wext*
@@ -1961,9 +1972,9 @@ S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Supported
+S:	Odd Fixes
 F:	sound/soc/codecs/cs4270*
 
 CLEANCACHE API
@@ -2012,6 +2023,7 @@ S:	Maintained
 F:	Documentation/filesystems/coda.txt
 F:	fs/coda/
 F:	include/linux/coda*.h
+F:	include/uapi/linux/coda*.h
 
 COMMON CLK FRAMEWORK
 M:	Mike Turquette <mturquette@linaro.org>
@@ -2266,6 +2278,7 @@ W:	http://www.cyclades.com/
 S:	Orphan
 F:	drivers/tty/cyclades.c
 F:	include/linux/cyclades.h
+F:	include/uapi/linux/cyclades.h
 
 CYCLADES PC300 DRIVER
 W:	http://www.cyclades.com/
@@ -2323,6 +2336,7 @@ L:	dccp@vger.kernel.org
 W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 S:	Maintained
 F:	include/linux/dccp.h
+F:	include/uapi/linux/dccp.h
 F:	include/linux/tfrc.h
 F:	net/dccp/
 
@@ -2349,7 +2363,7 @@ M:	Massimo Dal Zotto <dz@debian.org>
 W:	http://www.debian.org/~dz/i8k/
 S:	Maintained
 F:	drivers/char/i8k.c
-F:	include/linux/i8k.h
+F:	include/uapi/linux/i8k.h
 
 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
 M:	Doug Warzecha <Douglas_Warzecha@dell.com>
@@ -2422,6 +2436,7 @@ S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
 F:	include/linux/quota*.h
+F:	include/uapi/linux/quota*.h
 
 DISPLAYLINK USB 2.0 FRAMEBUFFER DRIVER (UDLFB)
 M:	Bernie Thompson <bernie@plugable.com>
@@ -2528,6 +2543,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
 F:	include/drm/
+F:	include/uapi/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
@@ -2537,6 +2553,7 @@ T:	git git://people.freedesktop.org/~danvet/drm-intel
 S:	Supported
 F:	drivers/gpu/drm/i915
 F:	include/drm/i915*
+F:	include/uapi/drm/i915*
 
 DRM DRIVERS FOR EXYNOS
 M:	Inki Dae <inki.dae@samsung.com>
@@ -2548,6 +2565,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
+F:	include/uapi/drm/exynos*
 
 DRM DRIVERS FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@avionic-design.de>
@@ -2622,7 +2640,7 @@ W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
-F:	drivers/media/usb/dvb-usb-v2/cxusb*
+F:	drivers/media/usb/dvb-usb/cxusb*
 
 DVB_USB_CYPRESS_FIRMWARE MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
@@ -2722,6 +2740,7 @@ L:	netfilter-devel@vger.kernel.org
 W:	http://ebtables.sourceforge.net/
 S:	Maintained
 F:	include/linux/netfilter_bridge/ebt_*.h
+F:	include/uapi/linux/netfilter_bridge/ebt_*.h
 F:	net/bridge/netfilter/ebt*.c
 
 EC100 MEDIA DRIVER
@@ -2933,12 +2952,6 @@ M:	Maxim Levitsky <maximlevitsky@gmail.com>
 S:	Maintained
 F:	drivers/media/rc/ene_ir.*
 
-EPSON 1355 FRAMEBUFFER DRIVER
-M:	Christopher Hoover <ch@murgatroid.com>
-M:	Christopher Hoover <ch@hpl.hp.com>
-S:	Maintained
-F:	drivers/video/epson1355fb.c
-
 EPSON S1D13XXX FRAMEBUFFER DRIVER
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 S:	Maintained
@@ -3051,6 +3064,7 @@ M:	Eric Paris <eparis@redhat.com>
 S:	Maintained
 F:	fs/notify/fanotify/
 F:	include/linux/fanotify.h
+F:	include/uapi/linux/fanotify.h
 
 FARSYNC SYNCHRONOUS DRIVER
 M:	Kevin Curtis <kevin.curtis@farsite.co.uk>
@@ -3074,6 +3088,7 @@ F:	drivers/scsi/fcoe/
 F:	include/scsi/fc/
 F:	include/scsi/libfc.h
 F:	include/scsi/libfcoe.h
+F:	include/uapi/scsi/fc/
 
 FILE LOCKING (flock() and fcntl()/lockf())
 M:	Matthew Wilcox <matthew@wil.cx>
@@ -3081,6 +3096,8 @@ L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/fcntl.h
 F:	include/linux/fs.h
+F:	include/uapi/linux/fcntl.h
+F:	include/uapi/linux/fs.h
 F:	fs/fcntl.c
 F:	fs/locks.c
 
@@ -3170,11 +3187,13 @@ F:	Documentation/devicetree/bindings/fb/
 F:	drivers/video/
 F:	include/video/
 F:	include/linux/fb.h
+F:	include/uapi/video/
+F:	include/uapi/linux/fb.h
 
 FREESCALE DIU FRAMEBUFFER DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linux-fbdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/video/fsl-diu-fb.*
 
 FREESCALE DMA DRIVER
@@ -3196,7 +3215,7 @@ M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-fbdev@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/plat-mxc/include/mach/imxfb.h
+F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/imxfb.c
 
 FREESCALE SOC FS_ENET DRIVER
@@ -3209,9 +3228,8 @@ F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Orphan
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
@@ -3230,16 +3248,16 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
@@ -3273,6 +3291,16 @@ F:	Documentation/filesystems/caching/
 F:	fs/fscache/
 F:	include/linux/fscache*.h
 
+F2FS FILE SYSTEM
+M:	Jaegeuk Kim <jaegeuk.kim@samsung.com>
+L:	linux-f2fs-devel@lists.sourceforge.net
+W:	http://en.wikipedia.org/wiki/F2FS
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
+S:	Maintained
+F:	Documentation/filesystems/f2fs.txt
+F:	fs/f2fs/
+F:	include/linux/f2fs_fs.h
+
 FUJITSU FR-V (FRV) PORT
 M:	David Howells <dhowells@redhat.com>
 S:	Maintained
@@ -3304,7 +3332,7 @@ L:	fuse-devel@lists.sourceforge.net
 W:	http://fuse.sourceforge.net/
 S:	Maintained
 F:	fs/fuse/
-F:	include/linux/fuse.h
+F:	include/uapi/linux/fuse.h
 
 FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
 M:	Rik Faith <faith@cs.unc.edu>
@@ -3351,6 +3379,7 @@ L:	linux-arch@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:	Maintained
 F:	include/asm-generic
+F:	include/uapi/asm-generic
 
 GENERIC UIO DRIVER FOR PCI DEVICES
 M:	"Michael S. Tsirkin" <mst@redhat.com>
@@ -3367,7 +3396,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw.git
 S:	Supported
 F:	Documentation/filesystems/gfs2*.txt
 F:	fs/gfs2/
-F:	include/linux/gfs2_ondisk.h
+F:	include/uapi/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
 M:	Hansjoerg Lipp <hjlipp@web.de>
@@ -3377,7 +3406,7 @@ W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
 F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
-F:	include/linux/gigaset_dev.h
+F:	include/uapi/linux/gigaset_dev.h
 
 GPIO SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
@@ -3534,6 +3563,7 @@ S:	Supported
 F:	Documentation/scsi/hpsa.txt
 F:	drivers/scsi/hpsa*.[ch]
 F:	include/linux/cciss*.h
+F:	include/uapi/linux/cciss*.h
 
 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
 M:	Mike Miller <mike.miller@hp.com>
@@ -3542,6 +3572,7 @@ S:	Supported
 F:	Documentation/blockdev/cciss.txt
 F:	drivers/block/cciss*
 F:	include/linux/cciss_ioctl.h
+F:	include/uapi/linux/cciss_ioctl.h
 
 HFS FILESYSTEM
 L:	linux-fsdevel@vger.kernel.org
@@ -3576,6 +3607,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
 F:	drivers/hid/
 F:	include/linux/hid*
+F:	include/uapi/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
 M:	Thomas Gleixner <tglx@linutronix.de>
@@ -3607,7 +3639,7 @@ M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-hippi@sunsite.dk
 S:	Maintained
 F:	include/linux/hippidevice.h
-F:	include/linux/if_hippi.h
+F:	include/uapi/linux/if_hippi.h
 F:	net/802/hippi.c
 F:	drivers/net/hippi/
 
@@ -3635,6 +3667,7 @@ S:	Maintained
 F:	Documentation/timers/hpet.txt
 F:	drivers/char/hpet.c
 F:	include/linux/hpet.h
+F:	include/uapi/linux/hpet.h
 
 HPET:	x86
 M:	"Venkatesh Pallipadi (Venki)" <venki@google.com>
@@ -3735,6 +3768,8 @@ F:	Documentation/i2c/
 F:	drivers/i2c/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
+F:	include/uapi/linux/i2c.h
+F:	include/uapi/linux/i2c-*.h
 
 I2C-TAOS-EVM DRIVER
 M:	Jean Delvare <khali@linux-fr.org>
@@ -3850,7 +3885,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
 F:	net/ieee802154/
 F:	net/mac802154/
-F:	drivers/ieee802154/
+F:	drivers/net/ieee802154/
 
 IGUANAWORKS USB IR TRANSCEIVER
 M:	Sean Young <sean@mess.org>
@@ -3901,7 +3936,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
-F:	include/linux/if_infiniband.h
+F:	include/uapi/linux/if_infiniband.h
 
 INOTIFY
 M:	John McCutchan <john@johnmccutchan.com>
@@ -3911,6 +3946,7 @@ S:	Maintained
 F:	Documentation/filesystems/inotify.txt
 F:	fs/notify/inotify/
 F:	include/linux/inotify.h
+F:	include/uapi/linux/inotify.h
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
 M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
@@ -3921,6 +3957,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 F:	include/linux/input.h
+F:	include/uapi/linux/input.h
 F:	include/linux/input/
 
 INPUT MULTITOUCH (MT) PROTOCOL
@@ -3941,7 +3978,6 @@ L:	linux-scsi@vger.kernel.org
 T:	git git://git.code.sf.net/p/intel-sas/isci
 S:	Supported
 F:	drivers/scsi/isci/
-F:	firmware/isci/
 
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
@@ -4036,12 +4072,6 @@ F:	Documentation/networking/ixgbe.txt
 F:	Documentation/networking/ixgbevf.txt
 F:	drivers/net/ethernet/intel/
 
-INTEL MRST PMU DRIVER
-M:	Len Brown <len.brown@intel.com>
-L:	linux-pm@vger.kernel.org
-S:	Supported
-F:	arch/x86/platform/mrst/pmu.*
-
 INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT
 M:	Stanislav Yakovlev <stas.yakovlev@gmail.com>
 L:	linux-wireless@vger.kernel.org
@@ -4070,7 +4100,7 @@ S:	Supported
 W:	http://linuxwimax.org
 F:	Documentation/wimax/README.i2400m
 F:	drivers/net/wimax/i2400m/
-F:	include/linux/wimax/i2400m.h
+F:	include/uapi/linux/wimax/i2400m.h
 
 INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
 M:	Stanislaw Gruszka <sgruszka@redhat.com>
@@ -4092,9 +4122,9 @@ INTEL MANAGEMENT ENGINE (mei)
 M:	Tomas Winkler <tomas.winkler@intel.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	include/linux/mei.h
+F:	include/uapi/linux/mei.h
 F:	drivers/misc/mei/*
-F:	Documentation/mei/*
+F:	Documentation/misc-devices/mei/*
 
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
@@ -4134,6 +4164,7 @@ S:	Supported
 F:	Documentation/IPMI.txt
 F:	drivers/char/ipmi/
 F:	include/linux/ipmi*
+F:	include/uapi/linux/ipmi*
 
 IPS SCSI RAID DRIVER
 M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
@@ -4151,7 +4182,7 @@ L:	lvs-devel@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/ipvs-sysctl.txt
 F:	include/net/ip_vs.h
-F:	include/linux/ip_vs.h
+F:	include/uapi/linux/ip_vs.h
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
@@ -4164,8 +4195,8 @@ IPX NETWORK LAYER
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	include/linux/ipx.h
 F:	include/net/ipx.h
+F:	include/uapi/linux/ipx.h
 F:	net/ipx/
 
 IRDA SUBSYSTEM
@@ -4228,6 +4259,8 @@ F:	Documentation/isdn/
 F:	drivers/isdn/
 F:	include/linux/isdn.h
 F:	include/linux/isdn/
+F:	include/uapi/linux/isdn.h
+F:	include/uapi/linux/isdn/
 
 ISDN SUBSYSTEM (Eicon active card driver)
 M:	Armin Schindler <mac@melware.de>
@@ -4268,7 +4301,7 @@ W:	http://www.ivtvdriver.org
 S:	Maintained
 F:	Documentation/video4linux/*.ivtv
 F:	drivers/media/pci/ivtv/
-F:	include/linux/ivtv*
+F:	include/uapi/linux/ivtv*
 
 IX2505V MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
@@ -4306,7 +4339,7 @@ L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
 S:	Maintained
 F:	fs/jffs2/
-F:	include/linux/jffs2.h
+F:	include/uapi/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
 M:	Andrew Morton <akpm@linux-foundation.org>
@@ -4389,11 +4422,13 @@ W:	http://nfs.sourceforge.net/
 S:	Supported
 F:	fs/nfsd/
 F:	include/linux/nfsd/
+F:	include/uapi/linux/nfsd/
 F:	fs/lockd/
 F:	fs/nfs_common/
 F:	net/sunrpc/
 F:	include/linux/lockd/
 F:	include/linux/sunrpc/
+F:	include/uapi/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
 M:	Marcelo Tosatti <mtosatti@redhat.com>
@@ -4405,6 +4440,7 @@ F:	Documentation/*/kvm.txt
 F:	arch/*/kvm/
 F:	arch/*/include/asm/kvm*
 F:	include/linux/kvm*
+F:	include/uapi/linux/kvm*
 F:	virt/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
@@ -4451,6 +4487,7 @@ W:	http://kernel.org/pub/linux/utils/kernel/kexec/
 L:	kexec@lists.infradead.org
 S:	Maintained
 F:	include/linux/kexec.h
+F:	include/uapi/linux/kexec.h
 F:	kernel/kexec.c
 
 KEYS/KEYRINGS:
@@ -4692,6 +4729,7 @@ LLC (802.2)
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	include/linux/llc.h
+F:	include/uapi/linux/llc.h
 F:	include/net/llc*
 F:	net/llc/
 
@@ -4912,7 +4950,7 @@ MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev@vger.kernel.org
 S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
-F:	include/linux/matroxfb.h
+F:	include/uapi/linux/matroxfb.h
 
 MAX16065 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
@@ -4994,7 +5032,7 @@ T:	git git://git.infradead.org/mtd-2.6.git
 S:	Maintained
 F:	drivers/mtd/
 F:	include/linux/mtd/
-F:	include/mtd/
+F:	include/uapi/mtd/
 
 MICROBLAZE ARCHITECTURE
 M:	Michal Simek <monstr@monstr.eu>
@@ -5032,12 +5070,6 @@ F:	Documentation/video4linux/meye.txt
 F:	drivers/media/pci/meye/
 F:	include/uapi/linux/meye.h
 
-MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-M:	Pavel Pisa <ppisa@pikron.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	drivers/mmc/host/imxmmc.*
-
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
@@ -5052,7 +5084,7 @@ S:	Maintained
 F:	drivers/media/radio/radio-mr800.c
 
 MSI LAPTOP SUPPORT
-M:	"Lee, Chun-Yi" <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
@@ -5076,6 +5108,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
 S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
+F:	include/uapi/linux/mmc/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
 S:	Orphan
@@ -5176,6 +5209,8 @@ S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
 F:	include/net/netfilter/
+F:	include/uapi/linux/netfilter*
+F:	include/uapi/linux/netfilter/
 F:	net/*/netfilter.c
 F:	net/*/netfilter/
 F:	net/netfilter/
@@ -5194,8 +5229,8 @@ M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
-F:	include/linux/netrom.h
 F:	include/net/netrom.h
+F:	include/uapi/linux/netrom.h
 F:	net/netrom/
 
 NETWORK BLOCK DEVICE (NBD)
@@ -5204,6 +5239,7 @@ S:	Maintained
 F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
+F:	include/uapi/linux/nbd.h
 
 NETWORK DROP MONITOR
 M:	Neil Horman <nhorman@tuxdriver.com>
@@ -5225,6 +5261,9 @@ F:	include/net/
 F:	include/linux/in.h
 F:	include/linux/net.h
 F:	include/linux/netdevice.h
+F:	include/uapi/linux/in.h
+F:	include/uapi/linux/net.h
+F:	include/uapi/linux/netdevice.h
 
 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <davem@davemloft.net>
@@ -5270,6 +5309,7 @@ F:	net/rfkill/
 F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/linux/wireless.h
+F:	include/uapi/linux/wireless.h
 F:	include/net/iw_handler.h
 F:	drivers/net/wireless/
 
@@ -5289,6 +5329,8 @@ F:	include/linux/fcdevice.h
 F:	include/linux/fddidevice.h
 F:	include/linux/hippidevice.h
 F:	include/linux/inetdevice.h
+F:	include/uapi/linux/if_*
+F:	include/uapi/linux/netdevice.h
 
 NETXEN (1/10) GbE SUPPORT
 M:	Sony Chacko <sony.chacko@qlogic.com>
@@ -5306,8 +5348,8 @@ L:	linux-wireless@vger.kernel.org
 L:	linux-nfc@lists.01.org (moderated for non-subscribers)
 S:	Maintained
 F:	net/nfc/
-F:	include/linux/nfc.h
 F:	include/net/nfc/
+F:	include/uapi/linux/nfc.h
 F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h
 
@@ -5324,6 +5366,8 @@ F:	net/sunrpc/
 F:	include/linux/lockd/
 F:	include/linux/nfs*
 F:	include/linux/sunrpc/
+F:	include/uapi/linux/nfs*
+F:	include/uapi/linux/sunrpc/
 
 NI5010 NETWORK DRIVER
 M:	Jan-Pascal van Best <janpascal@vanbest.org>
@@ -5470,8 +5514,7 @@ M:	Benoît Cousson <b-cousson@ti.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	arch/arm/mach-omap2/omap_hwmod.c
-F:	arch/arm/plat-omap/include/plat/omap_hwmod.h
+F:	arch/arm/mach-omap2/omap_hwmod.*
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
 M:	Benoît Cousson <b-cousson@ti.com>
@@ -5513,6 +5556,7 @@ M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4000_cs.c
 F:	include/linux/cm4000_cs.h
+F:	include/uapi/linux/cm4000_cs.h
 
 OMNIKEY CARDMAN 4040 DRIVER
 M:	Harald Welte <laforge@gnumonks.org>
@@ -5671,7 +5715,7 @@ S:	Orphan
 F:	drivers/parport/
 F:	include/linux/parport*.h
 F:	drivers/char/ppdev.c
-F:	include/linux/ppdev.h
+F:	include/uapi/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
 M:	Jeremy Fitzhardinge <jeremy@goop.org>
@@ -5812,11 +5856,11 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported
 F:	kernel/events/*
 F:	include/linux/perf_event.h
+F:	include/uapi/linux/perf_event.h
 F:	arch/*/kernel/perf_event*.c
 F:	arch/*/kernel/*/perf_event*.c
 F:	arch/*/kernel/*/*/perf_event*.c
 F:	arch/*/include/asm/perf_event.h
-F:	arch/*/lib/perf_event*.c
 F:	arch/*/kernel/perf_callchain.c
 F:	tools/perf/
 
@@ -5825,6 +5869,7 @@ M:	Christoph Hellwig <hch@infradead.org>
 L:	linux-abi-devel@lists.sourceforge.net
 S:	Maintained
 F:	include/linux/personality.h
+F:	include/uapi/linux/personality.h
 
 PHONET PROTOCOL
 M:	Remi Denis-Courmont <courmisch@gmail.com>
@@ -5832,6 +5877,7 @@ S:	Supported
 F:	Documentation/networking/phonet.txt
 F:	include/linux/phonet.h
 F:	include/net/phonet/
+F:	include/uapi/linux/phonet.h
 F:	net/phonet/
 
 PHRAM MTD DRIVER
@@ -5880,6 +5926,7 @@ M:	Jiri Kosina <jkosina@suse.cz>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
+F:	include/uapi/linux/pktcdvd.h
 
 PKUNITY SOC DRIVERS
 M:	Guan Xuetao <gxt@mprc.pku.edu.cn>
@@ -5954,7 +6001,7 @@ PPP OVER ATM (RFC 2364)
 M:	Mitchell Blank Jr <mitch@sfgoth.com>
 S:	Maintained
 F:	net/atm/pppoatm.c
-F:	include/linux/atmppp.h
+F:	include/uapi/linux/atmppp.h
 
 PPP OVER ETHERNET
 M:	Michal Ostrowski <mostrows@earthlink.net>
@@ -5967,6 +6014,7 @@ M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
 F:	net/l2tp/l2tp_ppp.c
 F:	include/linux/if_pppol2tp.h
+F:	include/uapi/linux/if_pppol2tp.h
 
 PPS SUPPORT
 M:	Rodolfo Giometti <giometti@enneenne.com>
@@ -6064,6 +6112,7 @@ F:	include/asm-generic/syscall.h
 F:	include/linux/ptrace.h
 F:	include/linux/regset.h
 F:	include/linux/tracehook.h
+F:	include/uapi/linux/ptrace.h
 F:	kernel/ptrace.c
 
 PVRUSB2 VIDEO4LINUX DRIVER
@@ -6092,7 +6141,6 @@ T:	git git://gitorious.org/linux-pwm/linux-pwm.git
 F:	Documentation/pwm.txt
 F:	Documentation/devicetree/bindings/pwm/
 F:	include/linux/pwm.h
-F:	include/linux/of_pwm.h
 F:	drivers/pwm/
 F:	drivers/video/backlight/pwm_bl.c
 F:	include/linux/pwm_backlight.h
@@ -6188,8 +6236,8 @@ M:	Anders Larsen <al@alarsen.net>
 W:	http://www.alarsen.net/linux/qnx4fs/
 S:	Maintained
 F:	fs/qnx4/
-F:	include/linux/qnx4_fs.h
-F:	include/linux/qnxtypes.h
+F:	include/uapi/linux/qnx4_fs.h
+F:	include/uapi/linux/qnxtypes.h
 
 QT1010 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
@@ -6223,7 +6271,7 @@ M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/aty/radeon*
-F:	include/linux/radeonfb.h
+F:	include/uapi/linux/radeonfb.h
 
 RADIOSHARK RADIO DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
@@ -6324,6 +6372,7 @@ S:	Maintained
 F:	Documentation/rtc.txt
 F:	drivers/rtc/
 F:	include/linux/rtc.h
+F:	include/uapi/linux/rtc.h
 
 REISERFS FILE SYSTEM
 L:	reiserfs-devel@vger.kernel.org
@@ -6378,8 +6427,8 @@ M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
-F:	include/linux/rose.h
 F:	include/net/rose.h
+F:	include/uapi/linux/rose.h
 F:	net/rose/
 
 RTL2830 MEDIA DRIVER
@@ -6556,6 +6605,8 @@ S:	Supported
 F:	include/linux/clocksource.h
 F:	include/linux/time.h
 F:	include/linux/timex.h
+F:	include/uapi/linux/time.h
+F:	include/uapi/linux/timex.h
 F:	kernel/time/clocksource.c
 F:	kernel/time/time*.c
 F:	kernel/time/ntp.c
@@ -6580,6 +6631,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
 F:	kernel/sched/
 F:	include/linux/sched.h
+F:	include/uapi/linux/sched.h
 
 SCORE ARCHITECTURE
 M:	Chen Liqin <liqin.chen@sunplusct.com>
@@ -6733,7 +6785,7 @@ SENSABLE PHANTOM
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/misc/phantom.c
-F:	include/linux/phantom.h
+F:	include/uapi/linux/phantom.h
 
 SERIAL ATA (SATA) SUBSYSTEM
 M:	Jeff Garzik <jgarzik@pobox.com>
@@ -6991,6 +7043,7 @@ L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
 F:	include/linux/raid/
+F:	include/uapi/linux/raid/
 
 SONIC NETWORK DRIVER
 M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
@@ -7031,6 +7084,7 @@ T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
 F:	Documentation/sound/
 F:	include/sound/
+F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
@@ -7131,6 +7185,7 @@ S:	Maintained
 F:	Documentation/spi/
 F:	drivers/spi/
 F:	include/linux/spi/
+F:	include/uapi/linux/spi/
 
 SPIDERNET NETWORK DRIVER for CELL
 M:	Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
@@ -7267,7 +7322,7 @@ F:	drivers/staging/rtl8712/
 STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER
 M:	Teddy Wang <teddy.wang@siliconmotion.com.cn>
 S:	Odd Fixes
-F:	drivers/staging/sm7xx/
+F:	drivers/staging/sm7xxfb/
 
 STAGING - SOFTLOGIC 6x10 MPEG CODEC
 M:	Ben Collins <bcollins@bluecherry.net>
@@ -7285,7 +7340,7 @@ S:	Odd Fixes
 F:	drivers/staging/speakup/
 
 STAGING - TI DSP BRIDGE DRIVERS
-M:	Omar Ramirez Luna <omar.ramirez@ti.com>
+M:	Omar Ramirez Luna <omar.ramirez@copitl.com>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/
 
@@ -7393,8 +7448,8 @@ TC CLASSIFIER
 M:	Jamal Hadi Salim <jhs@mojatatu.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	include/linux/pkt_cls.h
 F:	include/net/pkt_cls.h
+F:	include/uapi/linux/pkt_cls.h
 F:	net/sched/
 
 TCP LOW PRIORITY MODULE
@@ -7486,6 +7541,7 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/team/
 F:	include/linux/if_team.h
+F:	include/uapi/linux/if_team.h
 
 TECHNOTREND USB IR RECEIVER
 M:	Sean Young <sean@mess.org>
@@ -7584,7 +7640,7 @@ L:	netdev@vger.kernel.org (core kernel code)
 L:	tipc-discussion@lists.sourceforge.net (user apps, general discussion)
 W:	http://tipc.sourceforge.net/
 S:	Maintained
-F:	include/linux/tipc*.h
+F:	include/uapi/linux/tipc*.h
 F:	net/tipc/
 
 TILE ARCHITECTURE
@@ -7634,6 +7690,7 @@ W:	http://www.buzzard.org.uk/toshiba/
 S:	Maintained
 F:	drivers/char/toshiba.c
 F:	include/linux/toshiba.h
+F:	include/uapi/linux/toshiba.h
 
 TMIO MMC DRIVER
 M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
@@ -7701,6 +7758,9 @@ F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
 F:	include/linux/tty.h
+F:	include/uapi/linux/serial_core.h
+F:	include/uapi/linux/serial.h
+F:	include/uapi/linux/tty.h
 
 TUA9001 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
@@ -7780,7 +7840,7 @@ M:	David Herrmann <dh.herrmann@googlemail.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/uhid.c
-F:	include/linux/uhid.h
+F:	include/uapi/linux/uhid.h
 
 ULTRA-WIDEBAND (UWB) SUBSYSTEM:
 L:	linux-usb@vger.kernel.org
@@ -7809,6 +7869,7 @@ S:	Maintained
 F:	Documentation/cdrom/
 F:	drivers/cdrom/cdrom.c
 F:	include/linux/cdrom.h
+F:	include/uapi/linux/cdrom.h
 
 UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER
 M:	Vinayak Holikatti <vinholikatti@gmail.com>
@@ -7826,7 +7887,7 @@ T:	git git://git.infradead.org/ubi-2.6.git
 S:	Maintained
 F:	drivers/mtd/ubi/
 F:	include/linux/mtd/ubi.h
-F:	include/mtd/ubi-user.h
+F:	include/uapi/mtd/ubi-user.h
 
 UNSORTED BLOCK IMAGES (UBI) Fastmap
 M:	Richard Weinberger <richard@nod.at>
@@ -7860,7 +7921,7 @@ M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/net/usb/cdc_*.c
-F:	include/linux/usb/cdc.h
+F:	include/uapi/linux/usb/cdc.h
 
 USB CYPRESS C67X00 DRIVER
 M:	Peter Korsgaard <jacmet@sunsite.dk>
@@ -8181,6 +8242,7 @@ S:	Maintained
 F:	Documentation/vfio.txt
 F:	drivers/vfio/
 F:	include/linux/vfio.h
+F:	include/uapi/linux/vfio.h
 
 VIDEOBUF2 FRAMEWORK
 M:	Pawel Osciak <pawel@osciak.com>
@@ -8197,6 +8259,7 @@ L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	drivers/char/virtio_console.c
 F:	include/linux/virtio_console.h
+F:	include/uapi/linux/virtio_console.h
 
 VIRTIO CORE, NET AND BLOCK DRIVERS
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -8215,7 +8278,7 @@ L:	virtualization@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/vhost/
-F:	include/linux/vhost.h
+F:	include/uapi/linux/vhost.h
 
 VIA RHINE NETWORK DRIVER
 M:	Roger Luethi <rl@hellgate.ch>
@@ -8355,6 +8418,7 @@ S:	Maintained
 F:	Documentation/watchdog/
 F:	drivers/watchdog/
 F:	include/linux/watchdog.h
+F:	include/uapi/linux/watchdog.h
 
 WD7000 SCSI DRIVER
 M:	Miroslav Zagorac <zaga@fly.cc.fer.hr>
@@ -8380,9 +8444,9 @@ L:	wimax@linuxwimax.org
 S:	Supported
 W:	http://linuxwimax.org
 F:	Documentation/wimax/README.wimax
-F:	include/linux/wimax.h
 F:	include/linux/wimax/debug.h
 F:	include/net/wimax.h
+F:	include/uapi/linux/wimax.h
 F:	net/wimax/
 
 WISTRON LAPTOP BUTTON DRIVER
@@ -8468,7 +8532,7 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 X86 PLATFORM DRIVERS
-M:	Matthew Garrett <mjg@redhat.com>
+M:	Matthew Garrett <matthew.garrett@nebula.com>
 L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
 S:	Maintained
@@ -8500,6 +8564,7 @@ F:	drivers/*/xen-*front.c
 F:	drivers/xen/
 F:	arch/x86/include/asm/xen/
 F:	include/xen/
+F:	include/uapi/xen/
 
 XEN HYPERVISOR ARM
 M:	Stefano Stabellini <stefano.stabellini@eu.citrix.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

arch/alpha/include/asm/parport.h

@@ -9,8 +9,8 @@
 #ifndef _ASM_AXP_PARPORT_H
 #define _ASM_AXP_PARPORT_H 1
 
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+static int parport_pc_find_isa_ports (int autoirq, int autodma);
+static int parport_pc_find_nonpci_ports (int autoirq, int autodma)
 {
 	return parport_pc_find_isa_ports (autoirq, autodma);
 }

arch/alpha/kernel/pci.c

@@ -59,13 +59,13 @@ struct pci_controller *pci_isa_hose;
  * Quirks.
  */
 
-static void __devinit quirk_isa_bridge(struct pci_dev *dev)
+static void quirk_isa_bridge(struct pci_dev *dev)
 {
 	dev->class = PCI_CLASS_BRIDGE_ISA << 8;
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
 
-static void __devinit quirk_cypress(struct pci_dev *dev)
+static void quirk_cypress(struct pci_dev *dev)
 {
 	/* The Notorious Cy82C693 chip.  */
 
@@ -104,7 +104,7 @@ static void __devinit quirk_cypress(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
 
 /* Called for each device after PCI setup is done. */
-static void __devinit pcibios_fixup_final(struct pci_dev *dev)
+static void pcibios_fixup_final(struct pci_dev *dev)
 {
 	unsigned int class = dev->class >> 8;
 
@@ -198,8 +198,7 @@ subsys_initcall(pcibios_init);
 #ifdef ALPHA_RESTORE_SRM_SETUP
 static struct pdev_srm_saved_conf *srm_saved_configs;
 
-void __devinit
-pdev_save_srm_config(struct pci_dev *dev)
+void pdev_save_srm_config(struct pci_dev *dev)
 {
 	struct pdev_srm_saved_conf *tmp;
 	static int printed = 0;
@@ -241,8 +240,7 @@ pci_restore_srm_config(void)
 }
 #endif
 
-void __devinit
-pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev = bus->self;
 

arch/alpha/kernel/smp.c

@@ -68,7 +68,7 @@ enum ipi_message_type {
 };
 
 /* Set to a secondary's cpuid when it comes online.  */
-static int smp_secondary_alive __devinitdata = 0;
+static int smp_secondary_alive = 0;
 
 int smp_num_probed;		/* Internal processor count */
 int smp_num_cpus = 1;		/* Number that came online.  */
@@ -172,7 +172,7 @@ smp_callin(void)
 }
 
 /* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */
-static int __devinit
+static int
 wait_for_txrdy (unsigned long cpumask)
 {
 	unsigned long timeout;
@@ -468,7 +468,7 @@ smp_prepare_cpus(unsigned int max_cpus)
 	smp_num_cpus = smp_num_probed;
 }
 
-void __devinit
+void
 smp_prepare_boot_cpu(void)
 {
 }

arch/alpha/kernel/sys_titan.c

@@ -303,7 +303,7 @@ titan_late_init(void)
 
 }
 
-static int __devinit
+static int
 titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	u8 intline;

arch/arm/Kconfig

@@ -371,7 +371,6 @@ config ARCH_CNS3XXX
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
@@ -1230,6 +1229,7 @@ config ARM_ERRATA_430973
 config ARM_ERRATA_458693
 	bool "ARM errata: Processor deadlock when a false hazard is created"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
 	  erratum. For very specific sequences of memory operations, it is
@@ -1243,6 +1243,7 @@ config ARM_ERRATA_458693
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
 	  erratum. Any asynchronous access to the L2 cache may encounter a
@@ -1255,6 +1256,7 @@ config ARM_ERRATA_460075
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
 	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 742230 Cortex-A9
 	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
@@ -1267,6 +1269,7 @@ config ARM_ERRATA_742230
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
 	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 742231 Cortex-A9
 	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
@@ -1317,6 +1320,7 @@ config PL310_ERRATA_727915
 config ARM_ERRATA_743622
 	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
 	  (r2p*) erratum. Under very rare conditions, a faulty
@@ -1330,6 +1334,7 @@ config ARM_ERRATA_743622
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 751472 Cortex-A9 (prior
 	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the

arch/arm/boot/dts/Makefile

@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
+targets += $(dtb-y)
 endif
 
 # *.dtb used to be generated in the directory above. Clean out the

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -50,17 +50,19 @@
 		ranges;
 
 		serial@d0012000 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012100 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -34,7 +34,14 @@
 		reg = <0>;
 		clocks = <&cpuclk 0>;
 	    };
-	}
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};
 
 	soc {
 		pinctrl {

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -85,5 +85,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -100,5 +100,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
  };

arch/arm/boot/dts/armada-xp.dtsi

@@ -42,17 +42,19 @@
 
 	soc {
 		serial@d0012200 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012300 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 
@@ -93,14 +95,6 @@
 				status = "disabled";
 		};
 
-		ethernet@d0034000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-		};
-
 		xor@d0060900 {
 			compatible = "marvell,orion-xor";
 			reg = <0xd0060900 0x100

arch/arm/boot/dts/at91sam9260.dtsi

@@ -306,6 +306,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0	/* PB17 periph A */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 19 0x1 0x0	/* PB19 periph A */
+							 1 20 0x1 0x0	/* PB20 periph A */
+							 1 21 0x1 0x0>;	/* PB21 periph A */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -450,6 +466,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffbc000 0x4000>;
 				interrupts = <14 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9263.dtsi

@@ -271,6 +271,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 0 0x2 0x0	/* PB0 periph B */
+							 1 1 0x2 0x0	/* PB1 periph B */
+							 1 2 0x2 0x0>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 3 0x2 0x0	/* PB3 periph B */
+							 1 4 0x2 0x0	/* PB4 periph B */
+							 1 5 0x2 0x0>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<1 6 0x1 0x0	/* PB6 periph A */
+							 1 7 0x1 0x0	/* PB7 periph A */
+							 1 8 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<1 9 0x1 0x0	/* PB9 periph A */
+							 1 10 0x1 0x0	/* PB10 periph A */
+							 1 11 0x1 0x0>;	/* PB11 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -368,6 +400,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff98000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
@@ -375,6 +409,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -290,6 +290,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<3 0 0x1 0x0	/* PD0 periph A */
+							 3 1 0x1 0x0	/* PD1 periph A */
+							 3 2 0x1 0x0>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<3 3 0x1 0x0	/* PD3 periph A */
+							 3 4 0x1 0x0	/* PD4 periph A */
+							 3 5 0x1 0x0>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<3 10 0x1 0x0	/* PD10 periph A */
+							 3 11 0x1 0x0	/* PD11 periph A */
+							 3 12 0x1 0x0>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<3 13 0x1 0x0	/* PD13 periph A */
+							 3 14 0x1 0x0	/* PD14 periph A */
+							 3 15 0x1 0x0>;	/* PD15 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -425,6 +457,8 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
@@ -432,6 +466,8 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -28,6 +28,7 @@
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
+		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -244,6 +245,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -294,6 +311,15 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -88,13 +88,6 @@
 				interrupts = <1 4 7>;
 			};
 
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 4 5>;
-				status = "disabled";
-			};
-
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
@@ -290,6 +283,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -333,6 +342,15 @@
 				};
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;

arch/arm/boot/dts/dbx5x0.dtsi

@@ -170,7 +170,9 @@
 			gpio-bank = <8>;
 		};
 
-		pinctrl {
+		pinctrl@80157000 {
+			// This is actually the PRCMU base address
+			reg = <0x80157000 0x2000>;
 			compatible = "stericsson,nmk_pinctrl";
 		};
 

arch/arm/boot/dts/dove.dtsi

@@ -117,6 +117,7 @@
 		pinctrl: pinctrl@d0200 {
 			compatible = "marvell,dove-pinctrl";
 			reg = <0xd0200 0x10>;
+			clocks = <&gate_clk 22>;
 		};
 
 		spi0: spi@10600 {

arch/arm/boot/dts/ecx-2000.dts

@@ -32,6 +32,7 @@
 
 		cpu@0 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <0>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -39,6 +40,7 @@
 
 		cpu@1 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <1>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -46,6 +48,7 @@
 
 		cpu@2 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -53,6 +56,7 @@
 
 		cpu@3 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <3>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};
 
 	sdhci@12530000 {

arch/arm/boot/dts/exynos5250.dtsi

@@ -574,7 +574,7 @@
 
 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
-		reg = <0x14530000 0x100000>;
+		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
 	};
 

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -21,7 +21,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
 	};
 
 	spi {

arch/arm/boot/dts/highbank.dts

@@ -30,33 +30,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu@900 {
 			compatible = "arm,cortex-a9";
-			reg = <0>;
+			device_type = "cpu";
+			reg = <0x900>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@1 {
+		cpu@901 {
 			compatible = "arm,cortex-a9";
-			reg = <1>;
+			device_type = "cpu";
+			reg = <0x901>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@2 {
+		cpu@902 {
 			compatible = "arm,cortex-a9";
-			reg = <2>;
+			device_type = "cpu";
+			reg = <0x902>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@3 {
+		cpu@903 {
 			compatible = "arm,cortex-a9";
-			reg = <3>;
+			device_type = "cpu";
+			reg = <0x903>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -39,17 +39,17 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
 
-				led_pin_gpio0_17: led_gpio0_17@0 {
+				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -110,7 +110,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio0_17>;
+		pinctrl-0 = <&led_pin_gpio2_1>;
 
 		user {
 			label = "green";

arch/arm/boot/dts/imx31-bug.dts

@@ -14,7 +14,7 @@
 
 / {
 	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "fsl,imx31-bug", "fsl,imx31";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";
 
 	memory {
 		reg = <0x80000000 0x8000000>; /* 128M */

arch/arm/boot/dts/imx53.dtsi

@@ -492,7 +492,7 @@
 				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
-				clocks = <&clks 158>, <&clks 157>;
+				clocks = <&clks 87>, <&clks 86>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/kirkwood-6282.dtsi

@@ -39,6 +39,7 @@
 			#size-cells = <0>;
 			interrupts = <32>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 	};

arch/arm/boot/dts/kirkwood-topkick.dts

@@ -82,4 +82,21 @@
 			gpios = <&gpio1 16 1>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
 };

arch/arm/boot/dts/kirkwood.dtsi

@@ -144,6 +144,7 @@
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
+			clocks = <&gate_clk 3>;
 			status = "okay";
 		};
 

arch/arm/common/sa1111.c

@@ -686,8 +686,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
  *	%-EINVAL	no platform data passed
  *	%0		successful.
  */
-static int __devinit
-__sa1111_probe(struct device *me, struct resource *mem, int irq)
+static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
 	struct sa1111_platform_data *pd = me->platform_data;
 	struct sa1111 *sachip;
@@ -1011,7 +1010,7 @@ static int sa1111_resume(struct platform_device *dev)
 #define sa1111_resume  NULL
 #endif
 
-static int __devinit sa1111_probe(struct platform_device *pdev)
+static int sa1111_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int irq;

arch/arm/common/scoop.c

@@ -176,7 +176,7 @@ static int scoop_resume(struct platform_device *dev)
 #define scoop_resume	NULL
 #endif
 
-static int __devinit scoop_probe(struct platform_device *pdev)
+static int scoop_probe(struct platform_device *pdev)
 {
 	struct scoop_dev *devptr;
 	struct scoop_config *inf;
@@ -243,7 +243,7 @@ err_ioremap:
 	return ret;
 }
 
-static int __devexit scoop_remove(struct platform_device *pdev)
+static int scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 	int ret;
@@ -268,7 +268,7 @@ static int __devexit scoop_remove(struct platform_device *pdev)
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove		= __devexit_p(scoop_remove),
+	.remove		= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {

arch/arm/common/vic.c

@@ -206,6 +206,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 				struct device_node *node)
 {
 	struct vic_device *v;
+	int i;
 
 	if (vic_id >= ARRAY_SIZE(vic_devices)) {
 		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
@@ -220,6 +221,10 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 	vic_id++;
 	v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
 					  &vic_irqdomain_ops, v);
+	/* create an IRQ mapping for each valid IRQ */
+	for (i = 0; i < fls(valid_sources); i++)
+		if (valid_sources & (1 << i))
+			irq_create_mapping(v->domain, i);
 }
 
 static void vic_ack_irq(struct irq_data *d)
@@ -416,9 +421,9 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 		return -EIO;
 
 	/*
-	 * Passing -1 as first IRQ makes the simple domain allocate descriptors
+	 * Passing 0 as first IRQ makes the simple domain allocate descriptors
 	 */
-	__vic_init(regs, -1, ~0, ~0, node);
+	__vic_init(regs, 0, ~0, ~0, node);
 
 	return 0;
 }

arch/arm/configs/mvebu_defconfig

@@ -33,9 +33,7 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
-CONFIG_I2C_MV64XXX=y
+CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set

arch/arm/kernel/bios32.c

@@ -78,7 +78,7 @@ void pcibios_report_status(u_int status_mask, int warn)
  * Bug 3 is responsible for the sound DMA grinding to a halt.  We now
  * live with bug 2.
  */
-static void __devinit pci_fixup_83c553(struct pci_dev *dev)
+static void pci_fixup_83c553(struct pci_dev *dev)
 {
 	/*
 	 * Set memory region to start at address 0, and enable IO
@@ -130,7 +130,7 @@ static void __devinit pci_fixup_83c553(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);
 
-static void __devinit pci_fixup_unassign(struct pci_dev *dev)
+static void pci_fixup_unassign(struct pci_dev *dev)
 {
 	dev->resource[0].end -= dev->resource[0].start;
 	dev->resource[0].start = 0;
@@ -142,7 +142,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
  * if it is the host bridge by marking it as such.  These resources are of
  * no consequence to the PCI layer (they are handled elsewhere).
  */
-static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
+static void pci_fixup_dec21285(struct pci_dev *dev)
 {
 	int i;
 
@@ -161,7 +161,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
 /*
  * PCI IDE controllers use non-standard I/O port decoding, respect it.
  */
-static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
+static void pci_fixup_ide_bases(struct pci_dev *dev)
 {
 	struct resource *r;
 	int i;
@@ -182,7 +182,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
 /*
  * Put the DEC21142 to sleep
  */
-static void __devinit pci_fixup_dec21142(struct pci_dev *dev)
+static void pci_fixup_dec21142(struct pci_dev *dev)
 {
 	pci_write_config_dword(dev, 0x40, 0x80000000);
 }
@@ -204,7 +204,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_d
  * functional.  However, The CY82C693U _does not work_ in bus
  * master mode without locking the PCI bus solid.
  */
-static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
+static void pci_fixup_cy82c693(struct pci_dev *dev)
 {
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
 		u32 base0, base1;
@@ -254,7 +254,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
 
-static void __devinit pci_fixup_it8152(struct pci_dev *dev)
+static void pci_fixup_it8152(struct pci_dev *dev)
 {
 	int i;
 	/* fixup for ITE 8152 devices */
@@ -361,9 +361,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
 		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
 }
-#ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pcibios_fixup_bus);
-#endif
 
 /*
  * Swizzle the device pin each time we cross a bridge.  If a platform does
@@ -380,7 +378,7 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
  * PCI standard swizzle is implemented on plug-in cards and Cardbus based
  * PCI extenders, so it can not be ignored.
  */
-static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
+static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	struct pci_sys_data *sys = dev->sysdata;
 	int slot, oldpin = *pin;

arch/arm/kernel/etm.c

@@ -339,7 +339,7 @@ static struct miscdevice etb_miscdev = {
 	.fops = &etb_fops,
 };
 
-static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int etb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
@@ -531,7 +531,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
 static struct kobj_attribute trace_mode_attr =
 	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
 
-static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;

arch/arm/kernel/perf_event_cpu.c

@@ -132,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
 	return 0;
 }
 
-static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
+static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int cpu;
 	for_each_possible_cpu(cpu) {
@@ -178,7 +178,7 @@ static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
 /*
  * PMU platform driver and devicetree bindings.
  */
-static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
+static struct of_device_id cpu_pmu_of_device_ids[] = {
 	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
 	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
 	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
@@ -190,7 +190,7 @@ static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
 	{},
 };
 
-static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
+static struct platform_device_id cpu_pmu_plat_device_ids[] = {
 	{.name = "arm-pmu"},
 	{},
 };
@@ -198,7 +198,7 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
 /*
  * CPU PMU identification and probing.
  */
-static int __devinit probe_current_pmu(struct arm_pmu *pmu)
+static int probe_current_pmu(struct arm_pmu *pmu)
 {
 	int cpu = get_cpu();
 	unsigned long cpuid = read_cpuid_id();
@@ -252,7 +252,7 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu)
 	return ret;
 }
 
-static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
+static int cpu_pmu_device_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	int (*init_fn)(struct arm_pmu *);

arch/arm/kernel/perf_event_v6.c

@@ -653,7 +653,7 @@ static int armv6_map_event(struct perf_event *event)
 				&armv6_perf_cache_map, 0xFF);
 }
 
-static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "v6";
 	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
@@ -685,7 +685,7 @@ static int armv6mpcore_map_event(struct perf_event *event)
 				&armv6mpcore_perf_cache_map, 0xFF);
 }
 
-static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "v6mpcore";
 	cpu_pmu->handle_irq	= armv6pmu_handle_irq;

arch/arm/kernel/perf_event_v7.c

@@ -1226,7 +1226,7 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->max_period	= (1LLU << 32) - 1;
 };
 
-static u32 __devinit armv7_read_num_pmnc_events(void)
+static u32 armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;
 
@@ -1237,7 +1237,7 @@ static u32 __devinit armv7_read_num_pmnc_events(void)
 	return nb_cnt + 1;
 }
 
-static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A8";
@@ -1246,7 +1246,7 @@ static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A9";
@@ -1255,7 +1255,7 @@ static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A5";
@@ -1264,7 +1264,7 @@ static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A15";
@@ -1274,7 +1274,7 @@ static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A7";

arch/arm/kernel/perf_event_xscale.c

@@ -440,7 +440,7 @@ static int xscale_map_event(struct perf_event *event)
 				&xscale_perf_cache_map, 0xFF);
 }
 
-static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "xscale1";
 	cpu_pmu->handle_irq	= xscale1pmu_handle_irq;
@@ -810,7 +810,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val)
 	}
 }
 
-static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "xscale2";
 	cpu_pmu->handle_irq	= xscale2pmu_handle_irq;

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -358,7 +358,7 @@ static int cpld_video_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit cpld_video_remove(struct i2c_client *client)
+static int cpld_video_remove(struct i2c_client *client)
 {
 	cpld_client = NULL;
 	return 0;

arch/arm/mach-davinci/cdce949.c

@@ -256,7 +256,7 @@ static int cdce_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit cdce_remove(struct i2c_client *client)
+static int cdce_remove(struct i2c_client *client)
 {
 	cdce_i2c_client = NULL;
 	return 0;
@@ -274,7 +274,7 @@ static struct i2c_driver cdce_driver = {
 		.name	= "cdce949",
 	},
 	.probe		= cdce_probe,
-	.remove		= __devexit_p(cdce_remove),
+	.remove		= cdce_remove,
 	.id_table	= cdce_id,
 };
 

arch/arm/mach-dove/pcie.c

@@ -135,7 +135,7 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
 	/*
 	 * Prevent enumeration of root complex.

arch/arm/mach-exynos/Kconfig

@@ -74,6 +74,8 @@ config SOC_EXYNOS5440
 	depends on ARCH_EXYNOS5
 	select ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
+	select PINCTRL
+	select PINCTRL_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 

arch/arm/mach-exynos/common.c

@@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
 
+	/* EXYNOS5440 can support only common clock framework */
+
+	if (soc_is_exynos5440())
+		return;
+
+#ifdef CONFIG_SOC_EXYNOS5250
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
 
 	exynos5_register_clocks();
 	exynos5_setup_clocks();
+#endif
 }
 
 #define COMBINER_ENABLE_SET	0x0

arch/arm/mach-highbank/highbank.c

@@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = {
 
 static void highbank_power_off(void)
 {
-	hignbank_set_pwr_shutdown();
+	highbank_set_pwr_shutdown();
 
 	while (1)
 		cpu_do_idle();

arch/arm/mach-highbank/hotplug.c

@@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
-	highbank_set_cpu_jump(cpu, secondary_startup);
+	highbank_set_cpu_jump(cpu, phys_to_virt(0));
 	highbank_set_core_pwr();
 
 	cpu_do_idle();

arch/arm/mach-highbank/platsmp.c

@@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
 
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
+	highbank_set_cpu_jump(cpu, secondary_startup);
 	gic_raise_softirq(cpumask_of(cpu), 0);
 	return 0;
 }
@@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void)
 
 static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	if (scu_base_addr)
 		scu_enable(scu_base_addr);
-
-	/*
-	 * Write the address of secondary startup into the jump table
-	 * The cores are in wfi and wait until they receive a soft interrupt
-	 * and a non-zero value to jump to. Then the secondary CPU branches
-	 * to this address.
-	 */
-	for (i = 1; i < max_cpus; i++)
-		highbank_set_cpu_jump(i, secondary_startup);
 }
 
 struct smp_operations highbank_smp_ops __initdata = {

arch/arm/mach-highbank/pm.c

@@ -14,10 +14,12 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/suspend.h>
 
+#include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
 
@@ -26,16 +28,31 @@
 
 static int highbank_suspend_finish(unsigned long val)
 {
+	outer_flush_all();
+	outer_disable();
+
+	highbank_set_pwr_suspend();
+
 	cpu_do_idle();
+
+	highbank_clear_pwr_request();
 	return 0;
 }
 
 static int highbank_pm_enter(suspend_state_t state)
 {
-	hignbank_set_pwr_suspend();
+	cpu_pm_enter();
+	cpu_cluster_pm_enter();
+
 	highbank_set_cpu_jump(0, cpu_resume);
 	cpu_suspend(0, highbank_suspend_finish);
 
+	cpu_cluster_pm_exit();
+	cpu_pm_exit();
+
+	highbank_smc1(0x102, 0x1);
+	if (scu_base_addr)
+		scu_enable(scu_base_addr);
 	return 0;
 }
 

arch/arm/mach-highbank/sysregs.h

@@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void)
 		writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
 }
 
-static inline void hignbank_set_pwr_suspend(void)
+static inline void highbank_clear_core_pwr(void)
+{
+	int cpu = cpu_logical_map(smp_processor_id());
+	if (scu_base_addr)
+		scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
+	else
+		writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
+}
+
+static inline void highbank_set_pwr_suspend(void)
 {
 	writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_shutdown(void)
+static inline void highbank_set_pwr_shutdown(void)
 {
 	writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_soft_reset(void)
+static inline void highbank_set_pwr_soft_reset(void)
 {
 	writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_hard_reset(void)
+static inline void highbank_set_pwr_hard_reset(void)
 {
 	writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
+static inline void highbank_clear_pwr_request(void)
+{
+	writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
+	highbank_clear_core_pwr();
+}
+
 #endif

arch/arm/mach-highbank/system.c

@@ -22,9 +22,9 @@
 void highbank_restart(char mode, const char *cmd)
 {
 	if (mode == 'h')
-		hignbank_set_pwr_hard_reset();
+		highbank_set_pwr_hard_reset();
 	else
-		hignbank_set_pwr_soft_reset();
+		highbank_set_pwr_soft_reset();
 
 	while (1)
 		cpu_do_idle();

arch/arm/mach-imx/Kconfig

@@ -841,8 +841,6 @@ config SOC_IMX6Q
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
-	select ARM_ERRATA_743622
-	select ARM_ERRATA_751472
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420

arch/arm/mach-imx/clk-imx25.c

@@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
 	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
 	/* i.mx25 has the i.mx35 type cspi */
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");

arch/arm/mach-imx/clk-imx27.c

@@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
 	clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");

arch/arm/mach-imx/clk-imx31.c

@@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 	/* i.mx31 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");

arch/arm/mach-imx/clk-imx35.c

@@ -251,9 +251,9 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
 	clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");

arch/arm/mach-imx/cpufreq.c

@@ -188,7 +188,7 @@ static struct cpufreq_driver mxc_driver = {
 	.name = "imx",
 };
 
-static int __devinit mxc_cpufreq_driver_init(void)
+static int mxc_cpufreq_driver_init(void)
 {
 	return cpufreq_register_driver(&mxc_driver);
 }

arch/arm/mach-imx/devices/devices-common.h

@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
 
 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };

arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c

@@ -11,35 +11,36 @@
 #include "../hardware.h"
 #include "devices-common.h"
 
-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
 		.irq = soc ## _INT_USB_OTG,				\
 	}
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif
 
 struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+	return imx_add_platform_device_dmamask(data->devid, -1,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }

arch/arm/mach-imx/mmdc.c

@@ -21,7 +21,7 @@
 #define BP_MMDC_MAPSR_PSD	0
 #define BP_MMDC_MAPSR_PSS	4
 
-static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+static int imx_mmdc_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	void __iomem *mmdc_base, *reg;

arch/arm/mach-iop13xx/pci.c

@@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 /* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
  */
-struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	int which_atu;
 	struct pci_bus *bus = NULL;

arch/arm/mach-kirkwood/board-dt.c

@@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
 			 of_clk_get_from_provider(&clkspec));
 
+	clkspec.args[0] = CGC_BIT_SDIO;
+	orion_clkdev_add(NULL, "mvsdio",
+			 of_clk_get_from_provider(&clkspec));
+
 }
 
 static void __init kirkwood_of_clk_init(void)

arch/arm/mach-kirkwood/board-usi_topkick.c

@@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
 	0
 };
 
-#define TOPKICK_SATA0_PWR_ENABLE 36
-
 void __init usi_topkick_init(void)
 {
 	/*
@@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
 	 */
 	kirkwood_mpp_conf(topkick_mpp_config);
 
-	/* SATA0 power enable */
-	gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
 
 	kirkwood_ge00_init(&topkick_ge00_data);
 	kirkwood_sdio_init(&topkick_mvsdio_data);

arch/arm/mach-kirkwood/pcie.c

@@ -214,7 +214,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
  * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
  * the device. Decoding setup is handled by the orion code.
  */
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;

arch/arm/mach-ks8695/board-acs5k.c

@@ -92,7 +92,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
 	},
 };
 
-static void __devinit acs5k_i2c_init(void)
+static void acs5k_i2c_init(void)
 {
 	/* The gpio interface */
 	platform_device_register(&acs5k_i2c_device);

arch/arm/mach-mmp/sram.c

@@ -61,7 +61,7 @@ struct gen_pool *sram_get_gpool(char *pool_name)
 }
 EXPORT_SYMBOL(sram_get_gpool);
 
-static int __devinit sram_probe(struct platform_device *pdev)
+static int sram_probe(struct platform_device *pdev)
 {
 	struct sram_platdata *pdata = pdev->dev.platform_data;
 	struct sram_bank_info *info;
@@ -125,7 +125,7 @@ out:
 	return ret;
 }
 
-static int __devexit sram_remove(struct platform_device *pdev)
+static int sram_remove(struct platform_device *pdev)
 {
 	struct sram_bank_info *info;
 

arch/arm/mach-msm/proc_comm.c

@@ -120,7 +120,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
  * and unknown state. This function should be called early to
  * wait on the ARM9.
  */
-void __devinit proc_comm_boot_wait(void)
+void proc_comm_boot_wait(void)
 {
 	void __iomem *base = MSM_SHARED_RAM_BASE;
  

arch/arm/mach-msm/smd.c

@@ -988,7 +988,7 @@ int smd_core_init(void)
 	return 0;
 }
 
-static int __devinit msm_smd_probe(struct platform_device *pdev)
+static int msm_smd_probe(struct platform_device *pdev)
 {
 	/*
 	 * If we haven't waited for the ARM9 to boot up till now,

arch/arm/mach-mv78xx0/pcie.c

@@ -173,7 +173,7 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
 	/*
 	 * Prevent enumeration of root complex.

arch/arm/mach-nomadik/board-nhk8815.c

@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>

arch/arm/mach-nomadik/include/mach/irqs.h

@@ -22,49 +22,49 @@
 
 #include <mach/hardware.h>
 
-#define IRQ_VIC_START		1	/* first VIC interrupt is 1 */
+#define IRQ_VIC_START		32	/* first VIC interrupt is 1 */
 
 /*
  * Interrupt numbers generic for all Nomadik Chip cuts
  */
-#define IRQ_WATCHDOG			1
-#define IRQ_SOFTINT			2
-#define IRQ_CRYPTO			3
-#define IRQ_OWM				4
-#define IRQ_MTU0			5
-#define IRQ_MTU1			6
-#define IRQ_GPIO0			7
-#define IRQ_GPIO1			8
-#define IRQ_GPIO2			9
-#define IRQ_GPIO3			10
-#define IRQ_RTC_RTT			11
-#define IRQ_SSP				12
-#define IRQ_UART0			13
-#define IRQ_DMA1			14
-#define IRQ_CLCD_MDIF			15
-#define IRQ_DMA0			16
-#define IRQ_PWRFAIL			17
-#define IRQ_UART1			18
-#define IRQ_FIRDA			19
-#define IRQ_MSP0			20
-#define IRQ_I2C0			21
-#define IRQ_I2C1			22
-#define IRQ_SDMMC			23
-#define IRQ_USBOTG			24
-#define IRQ_SVA_IT0			25
-#define IRQ_SVA_IT1			26
-#define IRQ_SAA_IT0			27
-#define IRQ_SAA_IT1			28
-#define IRQ_UART2			29
-#define IRQ_MSP2			30
-#define IRQ_L2CC			49
-#define IRQ_HPI				50
-#define IRQ_SKE				51
-#define IRQ_KP				52
-#define IRQ_MEMST			55
-#define IRQ_SGA_IT			59
-#define IRQ_USBM			61
-#define IRQ_MSP1			63
+#define IRQ_WATCHDOG			(IRQ_VIC_START+0)
+#define IRQ_SOFTINT			(IRQ_VIC_START+1)
+#define IRQ_CRYPTO			(IRQ_VIC_START+2)
+#define IRQ_OWM				(IRQ_VIC_START+3)
+#define IRQ_MTU0			(IRQ_VIC_START+4)
+#define IRQ_MTU1			(IRQ_VIC_START+5)
+#define IRQ_GPIO0			(IRQ_VIC_START+6)
+#define IRQ_GPIO1			(IRQ_VIC_START+7)
+#define IRQ_GPIO2			(IRQ_VIC_START+8)
+#define IRQ_GPIO3			(IRQ_VIC_START+9)
+#define IRQ_RTC_RTT			(IRQ_VIC_START+10)
+#define IRQ_SSP				(IRQ_VIC_START+11)
+#define IRQ_UART0			(IRQ_VIC_START+12)
+#define IRQ_DMA1			(IRQ_VIC_START+13)
+#define IRQ_CLCD_MDIF			(IRQ_VIC_START+14)
+#define IRQ_DMA0			(IRQ_VIC_START+15)
+#define IRQ_PWRFAIL			(IRQ_VIC_START+16)
+#define IRQ_UART1			(IRQ_VIC_START+17)
+#define IRQ_FIRDA			(IRQ_VIC_START+18)
+#define IRQ_MSP0			(IRQ_VIC_START+19)
+#define IRQ_I2C0			(IRQ_VIC_START+20)
+#define IRQ_I2C1			(IRQ_VIC_START+21)
+#define IRQ_SDMMC			(IRQ_VIC_START+22)
+#define IRQ_USBOTG			(IRQ_VIC_START+23)
+#define IRQ_SVA_IT0			(IRQ_VIC_START+24)
+#define IRQ_SVA_IT1			(IRQ_VIC_START+25)
+#define IRQ_SAA_IT0			(IRQ_VIC_START+26)
+#define IRQ_SAA_IT1			(IRQ_VIC_START+27)
+#define IRQ_UART2			(IRQ_VIC_START+28)
+#define IRQ_MSP2			(IRQ_VIC_START+29)
+#define IRQ_L2CC			(IRQ_VIC_START+30)
+#define IRQ_HPI				(IRQ_VIC_START+31)
+#define IRQ_SKE				(IRQ_VIC_START+32)
+#define IRQ_KP				(IRQ_VIC_START+33)
+#define IRQ_MEMST			(IRQ_VIC_START+34)
+#define IRQ_SGA_IT			(IRQ_VIC_START+35)
+#define IRQ_USBM			(IRQ_VIC_START+36)
+#define IRQ_MSP1			(IRQ_VIC_START+37)
 
 #define NOMADIK_GPIO_OFFSET		(IRQ_VIC_START+64)
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_usb_config ams_delta_usb_config = {
+static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.register_host	= 1,
 	.hmc_mode	= 16,
 	.pins[0]	= 2,

arch/arm/mach-omap1/mailbox.c

@@ -142,7 +142,7 @@ static struct omap_mbox mbox_dsp_info = {
 
 static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
 
-static int __devinit omap1_mbox_probe(struct platform_device *pdev)
+static int omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int ret;
@@ -165,7 +165,7 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit omap1_mbox_remove(struct platform_device *pdev)
+static int omap1_mbox_remove(struct platform_device *pdev)
 {
 	omap_mbox_unregister();
 	iounmap(mbox_base);
@@ -174,7 +174,7 @@ static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
-	.remove	= __devexit_p(omap1_mbox_remove),
+	.remove	= omap1_mbox_remove,
 	.driver	= {
 		.name	= "omap-mailbox",
 	},

arch/arm/mach-omap1/usb.c

@@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 #endif
 
-void __init omap1_usb_init(struct omap_usb_config *pdata)
+void __init omap1_usb_init(struct omap_usb_config *_pdata)
 {
+	struct omap_usb_config *pdata;
+
+	pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return;
+
 	pdata->usb0_init = omap1_usb0_init;
 	pdata->usb1_init = omap1_usb1_init;
 	pdata->usb2_init = omap1_usb2_init;

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = {
 	.recalc_rate	= &omap2_clksel_recalc,
 	.get_parent	= &omap2_clksel_find_parent_index,
 	.set_parent	= &omap2_clksel_set_parent,
+	.enable		= &omap2_clkops_enable_clkdm,
+	.disable	= &omap2_clkops_disable_clkdm,
 };
 
 static struct clk emu_src_ck;

arch/arm/mach-omap2/gpmc.c

@@ -744,7 +744,7 @@ static int gpmc_setup_irq(void)
 	return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
 }
 
-static __devexit int gpmc_free_irq(void)
+static int gpmc_free_irq(void)
 {
 	int i;
 
@@ -762,7 +762,7 @@ static __devexit int gpmc_free_irq(void)
 	return 0;
 }
 
-static void __devexit gpmc_mem_exit(void)
+static void gpmc_mem_exit(void)
 {
 	int cs;
 
@@ -774,7 +774,7 @@ static void __devexit gpmc_mem_exit(void)
 
 }
 
-static int __devinit gpmc_mem_init(void)
+static int gpmc_mem_init(void)
 {
 	int cs, rc;
 	unsigned long boot_rom_space = 0;
@@ -1121,7 +1121,7 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 	return 0;
 }
 
-static __devinit int gpmc_probe(struct platform_device *pdev)
+static int gpmc_probe(struct platform_device *pdev)
 {
 	int rc;
 	u32 l;
@@ -1177,7 +1177,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static __devexit int gpmc_remove(struct platform_device *pdev)
+static int gpmc_remove(struct platform_device *pdev)
 {
 	gpmc_free_irq();
 	gpmc_mem_exit();
@@ -1187,7 +1187,7 @@ static __devexit int gpmc_remove(struct platform_device *pdev)
 
 static struct platform_driver gpmc_driver = {
 	.probe		= gpmc_probe,
-	.remove		= __devexit_p(gpmc_remove),
+	.remove		= gpmc_remove,
 	.driver		= {
 		.name	= DEVICE_NAME,
 		.owner	= THIS_MODULE,

arch/arm/mach-omap2/mailbox.c

@@ -342,7 +342,7 @@ struct omap_mbox mbox_2_info = {
 struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
 #endif
 
-static int __devinit omap2_mbox_probe(struct platform_device *pdev)
+static int omap2_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int ret;
@@ -395,7 +395,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit omap2_mbox_remove(struct platform_device *pdev)
+static int omap2_mbox_remove(struct platform_device *pdev)
 {
 	omap_mbox_unregister();
 	iounmap(mbox_base);
@@ -404,7 +404,7 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
-	.remove = __devexit_p(omap2_mbox_remove),
+	.remove = omap2_mbox_remove,
 	.driver = {
 		.name = "omap-mailbox",
 	},

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -2070,7 +2070,7 @@ static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
 	{ .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
 	{ .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
 	{ .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
-	{ .irq = -1 + OMAP_INTC_START, },
+	{ .irq = -1, },
 };
 
 static struct omap_hwmod am33xx_usbss_hwmod = {
@@ -2515,7 +2515,7 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
+static struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
 	{
 		.pa_start	= 0x4A101000,
 		.pa_end		= 0x4A101000 + SZ_256 - 1,
@@ -2523,7 +2523,7 @@ struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
 	{ }
 };
 
-struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
 	.master		= &am33xx_cpgmac0_hwmod,
 	.slave		= &am33xx_mdio_hwmod,
 	.addr		= am33xx_mdio_addr_space,

arch/arm/mach-omap2/prm2xxx.c

@@ -27,6 +27,14 @@
 #include "cm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 
+/*
+ * OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits -
+ * these are reversed from the bits used on OMAP3+
+ */
+#define OMAP24XX_PWRDM_POWER_ON			0x0
+#define OMAP24XX_PWRDM_POWER_RET		0x1
+#define OMAP24XX_PWRDM_POWER_OFF		0x3
+
 /*
  * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
  *   hardware register (which are specific to the OMAP2xxx SoCs) to
@@ -67,6 +75,34 @@ static u32 omap2xxx_prm_read_reset_sources(void)
 	return r;
 }
 
+/**
+ * omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst
+ * @omap2xxx_pwrst: OMAP2xxx hardware power state to convert
+ *
+ * Return the common power state bits corresponding to the OMAP2xxx
+ * hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error.
+ */
+static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
+{
+	u8 pwrst;
+
+	switch (omap2xxx_pwrst) {
+	case OMAP24XX_PWRDM_POWER_OFF:
+		pwrst = PWRDM_POWER_OFF;
+		break;
+	case OMAP24XX_PWRDM_POWER_RET:
+		pwrst = PWRDM_POWER_RET;
+		break;
+	case OMAP24XX_PWRDM_POWER_ON:
+		pwrst = PWRDM_POWER_ON;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return pwrst;
+}
+
 /**
  * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
  *
@@ -97,10 +133,56 @@ int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
 	return 0;
 }
 
+static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	u8 omap24xx_pwrst;
+
+	switch (pwrst) {
+	case PWRDM_POWER_OFF:
+		omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF;
+		break;
+	case PWRDM_POWER_RET:
+		omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET;
+		break;
+	case PWRDM_POWER_ON:
+		omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+				   (omap24xx_pwrst << OMAP_POWERSTATE_SHIFT),
+				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+	return 0;
+}
+
+static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	u8 omap2xxx_pwrst;
+
+	omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+						       OMAP2_PM_PWSTCTRL,
+						       OMAP_POWERSTATE_MASK);
+
+	return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
+}
+
+static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	u8 omap2xxx_pwrst;
+
+	omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+						       OMAP2_PM_PWSTST,
+						       OMAP_POWERSTATEST_MASK);
+
+	return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
+}
+
 struct pwrdm_ops omap2_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
+	.pwrdm_set_next_pwrst	= omap2xxx_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap2xxx_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap2xxx_pwrdm_read_pwrst,
 	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
 	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
 	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,

arch/arm/mach-omap2/prm2xxx_3xxx.c

@@ -103,28 +103,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 /* Powerdomain low-level functions */
 
 /* Common functions across OMAP2 and OMAP3 */
-int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
-				   (pwrst << OMAP_POWERSTATE_SHIFT),
-				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL,
-					     OMAP_POWERSTATE_MASK);
-}
-
-int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTST,
-					     OMAP_POWERSTATEST_MASK);
-}
-
 int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
 								u8 pwrst)
 {