Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...

Documentation/devicetree/bindings/gpio/gpio-lp3943.txt

@@ -0,0 +1,37 @@
+TI/National Semiconductor LP3943 GPIO controller
+
+Required properties:
+  - compatible: "ti,lp3943-gpio"
+  - gpio-controller: Marks the device node as a GPIO controller.
+  - #gpio-cells: Should be 2. See gpio.txt in this directory for a
+                 description of the cells format.
+
+Example:
+Simple LED controls with LP3943 GPIO controller
+
+&i2c4 {
+	lp3943@60 {
+		compatible = "ti,lp3943";
+		reg = <0x60>;
+
+		gpioex: gpio {
+			compatible = "ti,lp3943-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+leds {
+	compatible = "gpio-leds";
+	indicator1 {
+		label = "indi1";
+		gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
+	};
+
+	indicator2 {
+		label = "indi2";
+		gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
+		default-state = "off";
+	};
+};

Documentation/devicetree/bindings/mfd/cros-ec.txt

@@ -17,6 +17,15 @@ Required properties (SPI):
 - compatible: "google,cros-ec-spi"
 - reg: SPI chip select
 
+Optional properties (SPI):
+- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
+  additional processing time in order to accept new transactions. If the delay
+  between transactions is not long enough the EC may not be able to respond
+  properly to subsequent transactions and cause them to hang. This property
+  specifies the delay, in usecs, introduced between transactions to account
+  for the time required by the EC to get back into a state in which new data
+  can be accepted.
+
 Required properties (LPC):
 - compatible: "google,cros-ec-lpc"
 - reg: List of (IO address, size) pairs defining the interface uses

Documentation/devicetree/bindings/mfd/lp3943.txt

@@ -0,0 +1,33 @@
+TI/National Semiconductor LP3943 MFD driver
+
+Required properties:
+  - compatible: "ti,lp3943"
+  - reg: I2C slave address. From 0x60 to 0x67.
+
+LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm.
+
+For the LP3943 GPIO properties please refer to:
+Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+
+For the LP3943 PWM properties please refer to:
+Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
+
+Example:
+
+lp3943@60 {
+	compatible = "ti,lp3943";
+	reg = <0x60>;
+
+	gpioex: gpio {
+		compatible = "ti,lp3943-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pwm3943: pwm {
+		compatible = "ti,lp3943-pwm";
+		#pwm-cells = <2>;
+		ti,pwm0 = <8 9 10>;
+		ti,pwm1 = <15>;
+	};
+};

Documentation/devicetree/bindings/mfd/s2mps11.txt

@@ -60,7 +60,7 @@ as per the datasheet of s2mps11.
 
 	- LDOn
 		  - valid values for n are 1 to 38
-		  - Example: LDO0, LD01, LDO28
+		  - Example: LDO1, LD02, LDO28
 	- BUCKn
 		  - valid values for n are 1 to 10.
 		  - Example: BUCK1, BUCK2, BUCK9

Documentation/devicetree/bindings/pwm/pwm-lp3943.txt

@@ -0,0 +1,58 @@
+TI/National Semiconductor LP3943 PWM controller
+
+Required properties:
+  - compatible: "ti,lp3943-pwm"
+  - #pwm-cells: Should be 2. See pwm.txt in this directory for a
+                description of the cells format.
+                Note that this hardware limits the period length to the
+                range 6250~1600000.
+  - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
+    0 = output 0
+    1 = output 1
+    .
+    .
+    15 = output 15
+
+Example:
+PWM 0 is for RGB LED brightness control
+PWM 1 is for brightness control of LP8557 backlight device
+
+&i2c3 {
+	lp3943@60 {
+		compatible = "ti,lp3943";
+		reg = <0x60>;
+
+		/*
+		 * PWM 0 : output 8, 9 and 10
+		 * PWM 1 : output 15
+		 */
+		pwm3943: pwm {
+			compatible = "ti,lp3943-pwm";
+			#pwm-cells = <2>;
+			ti,pwm0 = <8 9 10>;
+			ti,pwm1 = <15>;
+		};
+	};
+
+};
+
+/* LEDs control with PWM 0 of LP3943 */
+pwmleds {
+	compatible = "pwm-leds";
+	rgb {
+		label = "indi::rgb";
+		pwms = <&pwm3943 0 10000>;
+		max-brightness = <255>;
+	};
+};
+
+&i2c4 {
+	/* Backlight control with PWM 1 of LP3943 */
+	backlight@2c {
+		compatible = "ti,lp8557";
+		reg = <0x2c>;
+
+		pwms = <&pwm3943 1 10000>;
+		pwm-names = "lp8557";
+	};
+};

arch/arm/boot/dts/tegra20-colibri-512.dtsi

@@ -268,8 +268,8 @@
 					reg = <3>;
 					regulator-compatible = "sm2";
 					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 

drivers/gpio/Kconfig

@@ -406,6 +406,14 @@ config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
 
+config GPIO_LP3943
+	tristate "TI/National Semiconductor LP3943 GPIO expander"
+	depends on MFD_LP3943
+	help
+	  GPIO driver for LP3943 MFD.
+	  LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+	  Open drain outputs are required for this usage.
+
 config GPIO_MAX7300
 	tristate "Maxim MAX7300 GPIO expander"
 	depends on I2C

drivers/gpio/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_GPIO_KEMPLD)	+= gpio-kempld.o
 obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_INTEL_MID)	+= gpio-intel-mid.o
+obj-$(CONFIG_GPIO_LP3943)	+= gpio-lp3943.o
 obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o
 obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o

drivers/gpio/gpio-lp3943.c

@@ -0,0 +1,242 @@
+/*
+ * TI/National Semiconductor LP3943 GPIO driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum lp3943_gpios {
+	LP3943_GPIO1,
+	LP3943_GPIO2,
+	LP3943_GPIO3,
+	LP3943_GPIO4,
+	LP3943_GPIO5,
+	LP3943_GPIO6,
+	LP3943_GPIO7,
+	LP3943_GPIO8,
+	LP3943_GPIO9,
+	LP3943_GPIO10,
+	LP3943_GPIO11,
+	LP3943_GPIO12,
+	LP3943_GPIO13,
+	LP3943_GPIO14,
+	LP3943_GPIO15,
+	LP3943_GPIO16,
+	LP3943_MAX_GPIO,
+};
+
+struct lp3943_gpio {
+	struct gpio_chip chip;
+	struct lp3943 *lp3943;
+	u16 input_mask;		/* 1 = GPIO is input direction, 0 = output */
+};
+
+static inline struct lp3943_gpio *to_lp3943_gpio(struct gpio_chip *_chip)
+{
+	return container_of(_chip, struct lp3943_gpio, chip);
+}
+
+static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+	/* Return an error if the pin is already assigned */
+	if (test_and_set_bit(offset, &lp3943->pin_used))
+		return -EBUSY;
+
+	return 0;
+}
+
+static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+	clear_bit(offset, &lp3943->pin_used);
+}
+
+static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset,
+				u8 val)
+{
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+
+	return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask,
+				  val << mux[offset].shift);
+}
+
+static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+	lp3943_gpio->input_mask |= BIT(offset);
+
+	return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN);
+}
+
+static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio,
+				     struct gpio_chip *chip, unsigned offset)
+{
+	u8 addr, read;
+	int err;
+
+	switch (offset) {
+	case LP3943_GPIO1 ... LP3943_GPIO8:
+		addr = LP3943_REG_GPIO_A;
+		break;
+	case LP3943_GPIO9 ... LP3943_GPIO16:
+		addr = LP3943_REG_GPIO_B;
+		offset = offset - 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read);
+	if (err)
+		return err;
+
+	return !!(read & BIT(offset));
+}
+
+static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio,
+				      struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+	u8 read;
+	int err;
+
+	err = lp3943_read_byte(lp3943, mux[offset].reg, &read);
+	if (err)
+		return err;
+
+	read = (read & mux[offset].mask) >> mux[offset].shift;
+
+	if (read == LP3943_GPIO_OUT_HIGH)
+		return 1;
+	else if (read == LP3943_GPIO_OUT_LOW)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+	/*
+	 * Limitation:
+	 *   LP3943 doesn't have the GPIO direction register. It provides
+	 *   only input and output status registers.
+	 *   So, direction info is required to handle the 'get' operation.
+	 *   This variable is updated whenever the direction is changed and
+	 *   it is used here.
+	 */
+
+	if (lp3943_gpio->input_mask & BIT(offset))
+		return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset);
+	else
+		return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset);
+}
+
+static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+	u8 data;
+
+	if (value)
+		data = LP3943_GPIO_OUT_HIGH;
+	else
+		data = LP3943_GPIO_OUT_LOW;
+
+	lp3943_gpio_set_mode(lp3943_gpio, offset, data);
+}
+
+static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+	lp3943_gpio_set(chip, offset, value);
+	lp3943_gpio->input_mask &= ~BIT(offset);
+
+	return 0;
+}
+
+static const struct gpio_chip lp3943_gpio_chip = {
+	.label			= "lp3943",
+	.owner			= THIS_MODULE,
+	.request		= lp3943_gpio_request,
+	.free			= lp3943_gpio_free,
+	.direction_input	= lp3943_gpio_direction_input,
+	.get			= lp3943_gpio_get,
+	.direction_output	= lp3943_gpio_direction_output,
+	.set			= lp3943_gpio_set,
+	.base			= -1,
+	.ngpio			= LP3943_MAX_GPIO,
+	.can_sleep		= 1,
+};
+
+static int lp3943_gpio_probe(struct platform_device *pdev)
+{
+	struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+	struct lp3943_gpio *lp3943_gpio;
+
+	lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio),
+				GFP_KERNEL);
+	if (!lp3943_gpio)
+		return -ENOMEM;
+
+	lp3943_gpio->lp3943 = lp3943;
+	lp3943_gpio->chip = lp3943_gpio_chip;
+	lp3943_gpio->chip.dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, lp3943_gpio);
+
+	return gpiochip_add(&lp3943_gpio->chip);
+}
+
+static int lp3943_gpio_remove(struct platform_device *pdev)
+{
+	struct lp3943_gpio *lp3943_gpio = platform_get_drvdata(pdev);
+
+	return gpiochip_remove(&lp3943_gpio->chip);
+}
+
+static const struct of_device_id lp3943_gpio_of_match[] = {
+	{ .compatible = "ti,lp3943-gpio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match);
+
+static struct platform_driver lp3943_gpio_driver = {
+	.probe = lp3943_gpio_probe,
+	.remove = lp3943_gpio_remove,
+	.driver = {
+		.name = "lp3943-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = lp3943_gpio_of_match,
+	},
+};
+module_platform_driver(lp3943_gpio_driver);
+
+MODULE_DESCRIPTION("LP3943 GPIO driver");
+MODULE_ALIAS("platform:lp3943-gpio");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");

drivers/iio/adc/ti_am335x_adc.c

@@ -60,6 +60,24 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
 	return step_en;
 }
 
+static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
+		struct iio_chan_spec const *chan)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
+		if (chan->channel == adc_dev->channel_line[i]) {
+			u32 step;
+
+			step = adc_dev->channel_step[i];
+			/* +1 for the charger */
+			return 1 << (step + 1);
+		}
+	}
+	WARN_ON(1);
+	return 0;
+}
+
 static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
 {
 	return 1 << adc_dev->channel_step[chan];
@@ -181,7 +199,7 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 		enb |= (get_adc_step_bit(adc_dev, bit) << 1);
 	adc_dev->buffer_en_ch_steps = enb;
 
-	am335x_tsc_se_set(adc_dev->mfd_tscadc, enb);
+	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
 
 	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
 				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
@@ -199,6 +217,7 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
 				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
 	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
+	adc_dev->buffer_en_ch_steps = 0;
 
 	/* Flush FIFO of leftover data in the time it takes to disable adc */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
@@ -328,34 +347,43 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	unsigned int fifo1count, read, stepid;
 	bool found = false;
 	u32 step_en;
-	unsigned long timeout = jiffies + usecs_to_jiffies
-				(IDLE_TIMEOUT * adc_dev->channels);
+	unsigned long timeout;
 
 	if (iio_buffer_enabled(indio_dev))
 		return -EBUSY;
 
-	step_en = get_adc_step_mask(adc_dev);
-	am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
+	step_en = get_adc_chan_step_mask(adc_dev, chan);
+	if (!step_en)
+		return -EINVAL;
+
+	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+	while (fifo1count--)
+		tiadc_readl(adc_dev, REG_FIFO1);
+
+	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	/* Wait for ADC sequencer to complete sampling */
-	while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) {
-		if (time_after(jiffies, timeout))
+	timeout = jiffies + usecs_to_jiffies
+				(IDLE_TIMEOUT * adc_dev->channels);
+	/* Wait for Fifo threshold interrupt */
+	while (1) {
+		fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+		if (fifo1count)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 			return -EAGAIN;
 		}
+	}
 	map_val = chan->channel + TOTAL_CHANNELS;
 
 	/*
-	 * When the sub-system is first enabled,
-	 * the sequencer will always start with the
-	 * lowest step (1) and continue until step (16).
-	 * For ex: If we have enabled 4 ADC channels and
-	 * currently use only 1 out of them, the
-	 * sequencer still configures all the 4 steps,
-	 * leading to 3 unwanted data.
-	 * Hence we need to flush out this data.
+	 * We check the complete FIFO. We programmed just one entry but in case
+	 * something went wrong we left empty handed (-EAGAIN previously) and
+	 * then the value apeared somehow in the FIFO we would have two entries.
+	 * Therefore we read every item and keep only the latest version of the
+	 * requested channel.
 	 */
-
-	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (i = 0; i < fifo1count; i++) {
 		read = tiadc_readl(adc_dev, REG_FIFO1);
 		stepid = read & FIFOREAD_CHNLID_MASK;
@@ -367,6 +395,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 			*val = (u16) read;
 		}
 	}
+	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (found == false)
 		return -EBUSY;
@@ -494,7 +523,8 @@ static int tiadc_resume(struct device *dev)
 	tiadc_writel(adc_dev, REG_CTRL, restore);
 
 	tiadc_step_config(indio_dev);
-
+	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
+			adc_dev->buffer_en_ch_steps);
 	return 0;
 }
 

drivers/input/misc/Kconfig

@@ -168,7 +168,7 @@ config INPUT_MAX8997_HAPTIC
 
 config INPUT_MC13783_PWRBUTTON
 	tristate "MC13783 ON buttons"
-	depends on MFD_MC13783
+	depends on MFD_MC13XXX
 	help
 	  Support the ON buttons of MC13783 PMIC as an input device
 	  reporting power button status.

drivers/input/touchscreen/Kconfig

@@ -717,7 +717,7 @@ config TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_MC13783
 	tristate "Freescale MC13783 touchscreen input driver"
-	depends on MFD_MC13783
+	depends on MFD_MC13XXX
 	help
 	  Say Y here if you have an Freescale MC13783 PMIC on your
 	  board and want to use its touchscreen

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -198,7 +198,7 @@ static void titsc_step_config(struct titsc *ts_dev)
 	/* The steps1 … end and bit 0 for TS_Charge */
 	stepenable = (1 << (end_step + 2)) - 1;
 	ts_dev->step_mask = stepenable;
-	am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask);
+	am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
 }
 
 static void titsc_read_coordinates(struct titsc *ts_dev,
@@ -322,7 +322,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 
 	if (irqclr) {
 		titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
-		am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask);
+		am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
 		return IRQ_HANDLED;
 	}
 	return IRQ_NONE;

drivers/mfd/88pm800.c

@@ -148,7 +148,7 @@ static struct resource onkey_resources[] = {
 	 },
 };
 
-static struct mfd_cell onkey_devs[] = {
+static const struct mfd_cell onkey_devs[] = {
 	{
 	 .name = "88pm80x-onkey",
 	 .num_resources = 1,
@@ -157,7 +157,7 @@ static struct mfd_cell onkey_devs[] = {
 	 },
 };
 
-static struct mfd_cell regulator_devs[] = {
+static const struct mfd_cell regulator_devs[] = {
 	{
 	 .name = "88pm80x-regulator",
 	 .id = -1,

drivers/mfd/88pm805.c

@@ -77,7 +77,7 @@ static struct resource codec_resources[] = {
 	 },
 };
 
-static struct mfd_cell codec_devs[] = {
+static const struct mfd_cell codec_devs[] = {
 	{
 	 .name = "88pm80x-codec",
 	 .num_resources = ARRAY_SIZE(codec_resources),

drivers/mfd/Kconfig

@@ -80,7 +80,7 @@ config MFD_CROS_EC_I2C
 
 config MFD_CROS_EC_SPI
 	tristate "ChromeOS Embedded Controller (SPI)"
-	depends on MFD_CROS_EC && SPI
+	depends on MFD_CROS_EC && SPI && OF
 
 	---help---
 	  If you say Y here, you get support for talking to the ChromeOS EC
@@ -163,14 +163,10 @@ config MFD_DA9063
 	  Additional drivers must be enabled in order to use the functionality
 	  of the device.
 
-config MFD_MC13783
-	tristate
-
 config MFD_MC13XXX
 	tristate
 	depends on (SPI_MASTER || I2C)
 	select MFD_CORE
-	select MFD_MC13783
 	help
 	  Enable support for the Freescale MC13783 and MC13892 PMICs.
 	  This driver provides common support for accessing the device,
@@ -321,6 +317,19 @@ config MFD_88PM860X
 	  select individual components like voltage regulators, RTC and
 	  battery-charger under the corresponding menus.
 
+config MFD_MAX14577
+	bool "Maxim Semiconductor MAX14577 MUIC + Charger Support"
+	depends on I2C=y
+	select MFD_CORE
+	select REGMAP_I2C
+	select IRQ_DOMAIN
+	help
+	  Say yes here to support for Maxim Semiconductor MAX14577.
+	  This is a Micro-USB IC with Charger controls on chip.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 config MFD_MAX77686
 	bool "Maxim Semiconductor MAX77686 PMIC Support"
 	depends on I2C=y
@@ -725,6 +734,17 @@ config MFD_DM355EVM_MSP
 	  boards.  MSP430 firmware manages resets and power sequencing,
 	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
 
+config MFD_LP3943
+	tristate "TI/National Semiconductor LP3943 MFD Driver"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the TI/National Semiconductor LP3943.
+	  This driver consists of GPIO and PWM drivers.
+	  With these functionalities, it can be used for LED string control or
+	  general usage such like a GPIO controller and a PWM controller.
+
 config MFD_LP8788
 	bool "TI LP8788 Power Management Unit Driver"
 	depends on I2C=y

drivers/mfd/Makefile

@@ -102,6 +102,7 @@ obj-$(CONFIG_PMIC_DA9052)	+= da9052-core.o
 obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
 obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
 
+obj-$(CONFIG_MFD_LP3943)	+= lp3943.o
 obj-$(CONFIG_MFD_LP8788)	+= lp8788.o lp8788-irq.o
 
 da9055-objs			:= da9055-core.o da9055-i2c.o
@@ -110,6 +111,7 @@ obj-$(CONFIG_MFD_DA9055)	+= da9055.o
 da9063-objs			:= da9063-core.o da9063-irq.o da9063-i2c.o
 obj-$(CONFIG_MFD_DA9063)	+= da9063.o
 
+obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o max77686-irq.o
 obj-$(CONFIG_MFD_MAX77693)	+= max77693.o max77693-irq.o
 obj-$(CONFIG_MFD_MAX8907)	+= max8907.o

drivers/mfd/ab8500-core.c

@@ -491,7 +491,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 		if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
 			line += 1;
 
-		handle_nested_irq(ab8500->irq_base + line);
+		handle_nested_irq(irq_create_mapping(ab8500->domain, line));
 	}
 
 	return 0;
@@ -1017,7 +1017,7 @@ static struct resource ab8500_temp_resources[] = {
 	},
 };
 
-static struct mfd_cell ab8500_bm_devs[] = {
+static const struct mfd_cell ab8500_bm_devs[] = {
 	{
 		.name = "ab8500-charger",
 		.of_compatible = "stericsson,ab8500-charger",
@@ -1052,7 +1052,7 @@ static struct mfd_cell ab8500_bm_devs[] = {
 	},
 };
 
-static struct mfd_cell ab8500_devs[] = {
+static const struct mfd_cell ab8500_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
@@ -1143,7 +1143,7 @@ static struct mfd_cell ab8500_devs[] = {
 	},
 };
 
-static struct mfd_cell ab9540_devs[] = {
+static const struct mfd_cell ab9540_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
@@ -1214,7 +1214,7 @@ static struct mfd_cell ab9540_devs[] = {
 };
 
 /* Device list for ab8505  */
-static struct mfd_cell ab8505_devs[] = {
+static const struct mfd_cell ab8505_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
@@ -1275,7 +1275,7 @@ static struct mfd_cell ab8505_devs[] = {
 	},
 };
 
-static struct mfd_cell ab8540_devs[] = {
+static const struct mfd_cell ab8540_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
@@ -1339,7 +1339,7 @@ static struct mfd_cell ab8540_devs[] = {
 	},
 };
 
-static struct mfd_cell ab8540_cut1_devs[] = {
+static const struct mfd_cell ab8540_cut1_devs[] = {
 	{
 		.name = "ab8500-rtc",
 		.of_compatible = "stericsson,ab8500-rtc",
@@ -1348,7 +1348,7 @@ static struct mfd_cell ab8540_cut1_devs[] = {
 	},
 };
 
-static struct mfd_cell ab8540_cut2_devs[] = {
+static const struct mfd_cell ab8540_cut2_devs[] = {
 	{
 		.name = "ab8540-rtc",
 		.of_compatible = "stericsson,ab8540-rtc",

drivers/mfd/ab8500-debugfs.c

@@ -1600,7 +1600,6 @@ static int ab8500_interrupts_print(struct seq_file *s, void *p)
 
 	for (line = 0; line < num_interrupt_lines; line++) {
 		struct irq_desc *desc = irq_to_desc(line + irq_first);
-		struct irqaction *action = desc->action;
 
 		seq_printf(s, "%3i:  %6i %4i", line,
 			   num_interrupts[line],
@@ -1608,7 +1607,9 @@ static int ab8500_interrupts_print(struct seq_file *s, void *p)
 
 		if (desc && desc->name)
 			seq_printf(s, "-%-8s", desc->name);
-		if (action) {
+		if (desc && desc->action) {
+			struct irqaction *action = desc->action;
+
 			seq_printf(s, "  %s", action->name);
 			while ((action = action->next) != NULL)
 				seq_printf(s, ", %s", action->name);

drivers/mfd/arizona-core.c

@@ -565,7 +565,7 @@ static inline int arizona_of_get_core_pdata(struct arizona *arizona)
 }
 #endif
 
-static struct mfd_cell early_devs[] = {
+static const struct mfd_cell early_devs[] = {
 	{ .name = "arizona-ldo1" },
 };
 
@@ -577,7 +577,7 @@ static const char *wm5102_supplies[] = {
 	"SPKVDDR",
 };
 
-static struct mfd_cell wm5102_devs[] = {
+static const struct mfd_cell wm5102_devs[] = {
 	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-extcon" },
 	{ .name = "arizona-gpio" },
@@ -590,7 +590,7 @@ static struct mfd_cell wm5102_devs[] = {
 	},
 };
 
-static struct mfd_cell wm5110_devs[] = {
+static const struct mfd_cell wm5110_devs[] = {
 	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-extcon" },
 	{ .name = "arizona-gpio" },
@@ -609,7 +609,7 @@ static const char *wm8997_supplies[] = {
 	"SPKVDD",
 };
 
-static struct mfd_cell wm8997_devs[] = {
+static const struct mfd_cell wm8997_devs[] = {
 	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-extcon" },
 	{ .name = "arizona-gpio" },

drivers/mfd/as3722.c

@@ -54,7 +54,7 @@ static const struct resource as3722_adc_resource[] = {
 	},
 };
 
-static struct mfd_cell as3722_devs[] = {
+static const struct mfd_cell as3722_devs[] = {
 	{
 		.name = "as3722-pinctrl",
 	},
@@ -74,6 +74,9 @@ static struct mfd_cell as3722_devs[] = {
 	{
 		.name = "as3722-power-off",
 	},
+	{
+		.name = "as3722-wdt",
+	},
 };
 
 static const struct regmap_irq as3722_irqs[] = {

drivers/mfd/asic3.c

@@ -695,7 +695,7 @@ static int ds1wm_disable(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mfd_cell asic3_cell_ds1wm = {
+static const struct mfd_cell asic3_cell_ds1wm = {
 	.name          = "ds1wm",
 	.enable        = ds1wm_enable,
 	.disable       = ds1wm_disable,
@@ -797,7 +797,7 @@ static int asic3_mmc_disable(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mfd_cell asic3_cell_mmc = {
+static const struct mfd_cell asic3_cell_mmc = {
 	.name          = "tmio-mmc",
 	.enable        = asic3_mmc_enable,
 	.disable       = asic3_mmc_disable,

drivers/mfd/cros_ec.c

@@ -84,7 +84,7 @@ static irqreturn_t ec_irq_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static struct mfd_cell cros_devs[] = {
+static const struct mfd_cell cros_devs[] = {
 	{
 		.name = "cros-ec-keyb",
 		.id = 1,

drivers/mfd/cros_ec_i2c.c

@@ -120,7 +120,7 @@ static int cros_ec_command_xfer(struct cros_ec_device *ec_dev,
 	return ret;
 }
 
-static int cros_ec_probe_i2c(struct i2c_client *client,
+static int cros_ec_i2c_probe(struct i2c_client *client,
 			     const struct i2c_device_id *dev_id)
 {
 	struct device *dev = &client->dev;
@@ -150,7 +150,7 @@ static int cros_ec_probe_i2c(struct i2c_client *client,
 	return 0;
 }
 
-static int cros_ec_remove_i2c(struct i2c_client *client)
+static int cros_ec_i2c_remove(struct i2c_client *client)
 {
 	struct cros_ec_device *ec_dev = i2c_get_clientdata(client);
 
@@ -190,8 +190,8 @@ static struct i2c_driver cros_ec_driver = {
 		.owner	= THIS_MODULE,
 		.pm	= &cros_ec_i2c_pm_ops,
 	},
-	.probe		= cros_ec_probe_i2c,
-	.remove		= cros_ec_remove_i2c,
+	.probe		= cros_ec_i2c_probe,
+	.remove		= cros_ec_i2c_remove,
 	.id_table	= cros_ec_i2c_id,
 };
 

drivers/mfd/cros_ec_spi.c

@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/mfd/cros_ec.h>
 #include <linux/mfd/cros_ec_commands.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
@@ -50,10 +51,11 @@
 /*
   * Time between raising the SPI chip select (for the end of a
   * transaction) and dropping it again (for the next transaction).
-  * If we go too fast, the EC will miss the transaction. It seems
-  * that 50us is enough with the 16MHz STM32 EC.
+  * If we go too fast, the EC will miss the transaction. We know that we
+  * need at least 70 us with the 16 MHz STM32 EC, so go with 200 us to be
+  * safe.
   */
-#define EC_SPI_RECOVERY_TIME_NS	(50 * 1000)
+#define EC_SPI_RECOVERY_TIME_NS	(200 * 1000)
 
 /**
  * struct cros_ec_spi - information about a SPI-connected EC
@@ -61,10 +63,13 @@
  * @spi: SPI device we are connected to
  * @last_transfer_ns: time that we last finished a transfer, or 0 if there
  *	if no record
+ * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
+ *      is sent when we want to turn off CS at the end of a transaction.
  */
 struct cros_ec_spi {
 	struct spi_device *spi;
 	s64 last_transfer_ns;
+	unsigned int end_of_msg_delay;
 };
 
 static void debug_packet(struct device *dev, const char *name, u8 *ptr,
@@ -75,7 +80,9 @@ static void debug_packet(struct device *dev, const char *name, u8 *ptr,
 
 	dev_dbg(dev, "%s: ", name);
 	for (i = 0; i < len; i++)
-		dev_cont(dev, " %02x", ptr[i]);
+		pr_cont(" %02x", ptr[i]);
+
+	pr_cont("\n");
 #endif
 }
 
@@ -105,7 +112,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
 	/* Receive data until we see the header byte */
 	deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
 	do {
-		memset(&trans, '\0', sizeof(trans));
+		memset(&trans, 0, sizeof(trans));
 		trans.cs_change = 1;
 		trans.rx_buf = ptr = ec_dev->din;
 		trans.len = EC_MSG_PREAMBLE_COUNT;
@@ -157,7 +164,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
 		dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n",
 			todo, need_len, ptr - ec_dev->din);
 
-		memset(&trans, '\0', sizeof(trans));
+		memset(&trans, 0, sizeof(trans));
 		trans.cs_change = 1;
 		trans.rx_buf = ptr;
 		trans.len = todo;
@@ -217,7 +224,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 
 	/* Transmit phase - send our message */
 	debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
-	memset(&trans, '\0', sizeof(trans));
+	memset(&trans, 0, sizeof(trans));
 	trans.tx_buf = ec_dev->dout;
 	trans.len = len;
 	trans.cs_change = 1;
@@ -235,6 +242,17 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 
 	/* turn off CS */
 	spi_message_init(&msg);
+
+	if (ec_spi->end_of_msg_delay) {
+		/*
+		 * Add delay for last transaction, to ensure the rising edge
+		 * doesn't come too soon after the end of the data.
+		 */
+		memset(&trans, 0, sizeof(trans));
+		trans.delay_usecs = ec_spi->end_of_msg_delay;
+		spi_message_add_tail(&trans, &msg);
+	}
+
 	final_ret = spi_sync(ec_spi->spi, &msg);
 	ktime_get_ts(&ts);
 	ec_spi->last_transfer_ns = timespec_to_ns(&ts);
@@ -281,7 +299,18 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 	return 0;
 }
 
-static int cros_ec_probe_spi(struct spi_device *spi)
+static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	u32 val;
+	int ret;
+
+	ret = of_property_read_u32(np, "google,cros-ec-spi-msg-delay", &val);
+	if (!ret)
+		ec_spi->end_of_msg_delay = val;
+}
+
+static int cros_ec_spi_probe(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
 	struct cros_ec_device *ec_dev;
@@ -302,6 +331,9 @@ static int cros_ec_probe_spi(struct spi_device *spi)
 	if (!ec_dev)
 		return -ENOMEM;
 
+	/* Check for any DT properties */
+	cros_ec_spi_dt_probe(ec_spi, dev);
+
 	spi_set_drvdata(spi, ec_dev);
 	ec_dev->name = "SPI";
 	ec_dev->dev = dev;
@@ -323,7 +355,7 @@ static int cros_ec_probe_spi(struct spi_device *spi)
 	return 0;
 }
 
-static int cros_ec_remove_spi(struct spi_device *spi)
+static int cros_ec_spi_remove(struct spi_device *spi)
 {
 	struct cros_ec_device *ec_dev;
 
@@ -364,12 +396,12 @@ static struct spi_driver cros_ec_driver_spi = {
 		.owner	= THIS_MODULE,
 		.pm	= &cros_ec_spi_pm_ops,
 	},
-	.probe		= cros_ec_probe_spi,
-	.remove		= cros_ec_remove_spi,
+	.probe		= cros_ec_spi_probe,
+	.remove		= cros_ec_spi_remove,
 	.id_table	= cros_ec_spi_id,
 };
 
 module_spi_driver(cros_ec_driver_spi);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("ChromeOS EC multi function device (SPI)");

drivers/mfd/cs5535-mfd.c

@@ -172,7 +172,7 @@ static void cs5535_mfd_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(cs5535_mfd_pci_tbl) = {
+static const struct pci_device_id cs5535_mfd_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
 	{ 0, }

drivers/mfd/da9052-core.c

@@ -427,7 +427,7 @@ int da9052_adc_read_temp(struct da9052 *da9052)
 }
 EXPORT_SYMBOL_GPL(da9052_adc_read_temp);
 
-static struct mfd_cell da9052_subdev_info[] = {
+static const struct mfd_cell da9052_subdev_info[] = {
 	{
 		.name = "da9052-regulator",
 		.id = 1,

drivers/mfd/da9055-core.c

@@ -294,7 +294,7 @@ static struct resource da9055_ld05_6_resource = {
 	.flags = IORESOURCE_IRQ,
 };
 
-static struct mfd_cell da9055_devs[] = {
+static const struct mfd_cell da9055_devs[] = {
 	{
 		.of_compatible = "dialog,da9055-gpio",
 		.name = "da9055-gpio",

drivers/mfd/da9063-core.c

@@ -75,7 +75,7 @@ static struct resource da9063_hwmon_resources[] = {
 };
 
 
-static struct mfd_cell da9063_devs[] = {
+static const struct mfd_cell da9063_devs[] = {
 	{
 		.name		= DA9063_DRVNAME_REGULATORS,
 		.num_resources	= ARRAY_SIZE(da9063_regulators_resources),

drivers/mfd/db8500-prcmu.c

@@ -3070,7 +3070,7 @@ static struct db8500_thsens_platform_data db8500_thsens_data = {
 	.num_trips = 4,
 };
 
-static struct mfd_cell common_prcmu_devs[] = {
+static const struct mfd_cell common_prcmu_devs[] = {
 	{
 		.name = "ux500_wdt",
 		.platform_data = &db8500_wdt_pdata,
@@ -3079,7 +3079,7 @@ static struct mfd_cell common_prcmu_devs[] = {
 	},
 };
 
-static struct mfd_cell db8500_prcmu_devs[] = {
+static const struct mfd_cell db8500_prcmu_devs[] = {
 	{
 		.name = "db8500-prcmu-regulators",
 		.of_compatible = "stericsson,db8500-prcmu-regulator",

drivers/mfd/htc-pasic3.c

@@ -114,7 +114,7 @@ static struct resource ds1wm_resources[] __initdata = {
 	},
 };
 
-static struct mfd_cell ds1wm_cell __initdata = {
+static const struct mfd_cell ds1wm_cell __initconst = {
 	.name          = "ds1wm",
 	.enable        = ds1wm_enable,
 	.disable       = ds1wm_disable,

drivers/mfd/intel_msic.c

@@ -178,7 +178,7 @@ static struct mfd_cell msic_devs[] = {
  * These devices appear only after the MSIC driver itself is initialized so
  * we can guarantee that the SCU IPC interface is ready.
  */
-static struct mfd_cell msic_other_devs[] = {
+static const struct mfd_cell msic_other_devs[] = {
 	/* Audio codec in the MSIC */
 	{
 		.id			= -1,

drivers/mfd/janz-cmodio.c

@@ -265,7 +265,7 @@ static void cmodio_pci_remove(struct pci_dev *dev)
 #define PCI_VENDOR_ID_JANZ		0x13c3
 
 /* The list of devices that this module will support */
-static DEFINE_PCI_DEVICE_TABLE(cmodio_pci_ids) = {
+static const struct pci_device_id cmodio_pci_ids[] = {
 	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0101 },
 	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0100 },
 	{ 0, }

drivers/mfd/jz4740-adc.c

@@ -181,7 +181,7 @@ static struct resource jz4740_battery_resources[] = {
 	},
 };
 
-static struct mfd_cell jz4740_adc_cells[] = {
+static const struct mfd_cell jz4740_adc_cells[] = {
 	{
 		.id = 0,
 		.name = "jz4740-hwmon",

drivers/mfd/lp3943.c

@@ -0,0 +1,167 @@
+/*
+ * TI/National Semiconductor LP3943 MFD Core Driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver structure:
+ *   LP3943 is an integrated device capable of driving 16 output channels.
+ *   It can be used for a GPIO expander and PWM generators.
+ *
+ *                                   LED control    General usage for a device
+ *                                   ___________   ____________________________
+ *
+ *   LP3943 MFD ---- GPIO expander    leds-gpio        eg) HW enable pin
+ *               |
+ *               --- PWM generator    leds-pwm         eg) PWM input
+ *
+ *   Internal two PWM channels are used for LED dimming effect.
+ *   And each output pin can be used as a GPIO as well.
+ *   The LED functionality can work with GPIOs or PWMs.
+ *   LEDs can be controlled with legacy leds-gpio(static brightness) or
+ *   leds-pwm drivers(dynamic brightness control).
+ *   Alternatively, it can be used for generic GPIO and PWM controller.
+ *   For example, a GPIO is HW enable pin of a device.
+ *   A PWM is input pin of a backlight device.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#define LP3943_MAX_REGISTERS		0x09
+
+/* Register configuration for pin MUX */
+static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
+	/* address, mask, shift */
+	{ LP3943_REG_MUX0, 0x03, 0 },
+	{ LP3943_REG_MUX0, 0x0C, 2 },
+	{ LP3943_REG_MUX0, 0x30, 4 },
+	{ LP3943_REG_MUX0, 0xC0, 6 },
+	{ LP3943_REG_MUX1, 0x03, 0 },
+	{ LP3943_REG_MUX1, 0x0C, 2 },
+	{ LP3943_REG_MUX1, 0x30, 4 },
+	{ LP3943_REG_MUX1, 0xC0, 6 },
+	{ LP3943_REG_MUX2, 0x03, 0 },
+	{ LP3943_REG_MUX2, 0x0C, 2 },
+	{ LP3943_REG_MUX2, 0x30, 4 },
+	{ LP3943_REG_MUX2, 0xC0, 6 },
+	{ LP3943_REG_MUX3, 0x03, 0 },
+	{ LP3943_REG_MUX3, 0x0C, 2 },
+	{ LP3943_REG_MUX3, 0x30, 4 },
+	{ LP3943_REG_MUX3, 0xC0, 6 },
+};
+
+static struct mfd_cell lp3943_devs[] = {
+	{
+		.name = "lp3943-pwm",
+		.of_compatible = "ti,lp3943-pwm",
+	},
+	{
+		.name = "lp3943-gpio",
+		.of_compatible = "ti,lp3943-gpio",
+	},
+};
+
+int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(lp3943->regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	*read = (u8)val;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(lp3943_read_byte);
+
+int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data)
+{
+	return regmap_write(lp3943->regmap, reg, data);
+}
+EXPORT_SYMBOL_GPL(lp3943_write_byte);
+
+int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data)
+{
+	return regmap_update_bits(lp3943->regmap, reg, mask, data);
+}
+EXPORT_SYMBOL_GPL(lp3943_update_bits);
+
+static const struct regmap_config lp3943_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LP3943_MAX_REGISTERS,
+};
+
+static int lp3943_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+	struct lp3943 *lp3943;
+	struct device *dev = &cl->dev;
+
+	lp3943 = devm_kzalloc(dev, sizeof(*lp3943), GFP_KERNEL);
+	if (!lp3943)
+		return -ENOMEM;
+
+	lp3943->regmap = devm_regmap_init_i2c(cl, &lp3943_regmap_config);
+	if (IS_ERR(lp3943->regmap))
+		return PTR_ERR(lp3943->regmap);
+
+	lp3943->pdata = dev_get_platdata(dev);
+	lp3943->dev = dev;
+	lp3943->mux_cfg = lp3943_mux_cfg;
+	i2c_set_clientdata(cl, lp3943);
+
+	return mfd_add_devices(dev, -1, lp3943_devs, ARRAY_SIZE(lp3943_devs),
+			       NULL, 0, NULL);
+}
+
+static int lp3943_remove(struct i2c_client *cl)
+{
+	struct lp3943 *lp3943 = i2c_get_clientdata(cl);
+
+	mfd_remove_devices(lp3943->dev);
+	return 0;
+}
+
+static const struct i2c_device_id lp3943_ids[] = {
+	{ "lp3943", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp3943_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id lp3943_of_match[] = {
+	{ .compatible = "ti,lp3943", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_of_match);
+#endif
+
+static struct i2c_driver lp3943_driver = {
+	.probe = lp3943_probe,
+	.remove = lp3943_remove,
+	.driver = {
+		.name = "lp3943",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(lp3943_of_match),
+	},
+	.id_table = lp3943_ids,
+};
+
+module_i2c_driver(lp3943_driver);
+
+MODULE_DESCRIPTION("LP3943 MFD Core Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");

drivers/mfd/lp8788.c

@@ -71,7 +71,7 @@ static struct resource rtc_irqs[] = {
 	},
 };
 
-static struct mfd_cell lp8788_devs[] = {
+static const struct mfd_cell lp8788_devs[] = {
 	/* 4 bucks */
 	MFD_DEV_WITH_ID(BUCK, 1),
 	MFD_DEV_WITH_ID(BUCK, 2),

drivers/mfd/lpc_ich.c

@@ -517,7 +517,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
  * pci_driver, because the I/O Controller Hub has also other
  * functions that probably will be registered by other drivers.
  */
-static DEFINE_PCI_DEVICE_TABLE(lpc_ich_ids) = {
+static const struct pci_device_id lpc_ich_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x2410), LPC_ICH},
 	{ PCI_VDEVICE(INTEL, 0x2420), LPC_ICH0},
 	{ PCI_VDEVICE(INTEL, 0x2440), LPC_ICH2},

drivers/mfd/lpc_sch.c

@@ -76,7 +76,7 @@ static struct mfd_cell wdt_sch_cell = {
 	.ignore_resource_conflicts = true,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = {
+static const struct pci_device_id lpc_sch_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB) },

drivers/mfd/max14577.c

@@ -0,0 +1,245 @@
+/*
+ * max14577.c - mfd core driver for the Maxim 14577
+ *
+ * Copyright (C) 2013 Samsung Electrnoics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver is based on max8997.c
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max14577.h>
+#include <linux/mfd/max14577-private.h>
+
+static struct mfd_cell max14577_devs[] = {
+	{ .name = "max14577-muic", },
+	{
+		.name = "max14577-regulator",
+		.of_compatible = "maxim,max14577-regulator",
+	},
+	{ .name = "max14577-charger", },
+};
+
+static bool max14577_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX14577_REG_INT1 ... MAX14577_REG_STATUS3:
+		return true;
+	default:
+		break;
+	}
+	return false;
+}
+
+static const struct regmap_config max14577_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.volatile_reg	= max14577_volatile_reg,
+	.max_register	= MAX14577_REG_END,
+};
+
+static const struct regmap_irq max14577_irqs[] = {
+	/* INT1 interrupts */
+	{ .reg_offset = 0, .mask = INT1_ADC_MASK, },
+	{ .reg_offset = 0, .mask = INT1_ADCLOW_MASK, },
+	{ .reg_offset = 0, .mask = INT1_ADCERR_MASK, },
+	/* INT2 interrupts */
+	{ .reg_offset = 1, .mask = INT2_CHGTYP_MASK, },
+	{ .reg_offset = 1, .mask = INT2_CHGDETRUN_MASK, },
+	{ .reg_offset = 1, .mask = INT2_DCDTMR_MASK, },
+	{ .reg_offset = 1, .mask = INT2_DBCHG_MASK, },
+	{ .reg_offset = 1, .mask = INT2_VBVOLT_MASK, },
+	/* INT3 interrupts */
+	{ .reg_offset = 2, .mask = INT3_EOC_MASK, },
+	{ .reg_offset = 2, .mask = INT3_CGMBC_MASK, },
+	{ .reg_offset = 2, .mask = INT3_OVP_MASK, },
+	{ .reg_offset = 2, .mask = INT3_MBCCHGERR_MASK, },
+};
+
+static const struct regmap_irq_chip max14577_irq_chip = {
+	.name			= "max14577",
+	.status_base		= MAX14577_REG_INT1,
+	.mask_base		= MAX14577_REG_INTMASK1,
+	.mask_invert		= 1,
+	.num_regs		= 3,
+	.irqs			= max14577_irqs,
+	.num_irqs		= ARRAY_SIZE(max14577_irqs),
+};
+
+static int max14577_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct max14577 *max14577;
+	struct max14577_platform_data *pdata = dev_get_platdata(&i2c->dev);
+	struct device_node *np = i2c->dev.of_node;
+	u8 reg_data;
+	int ret = 0;
+
+	if (np) {
+		pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+		i2c->dev.platform_data = pdata;
+	}
+
+	if (!pdata) {
+		dev_err(&i2c->dev, "No platform data found.\n");
+		return -EINVAL;
+	}
+
+	max14577 = devm_kzalloc(&i2c->dev, sizeof(*max14577), GFP_KERNEL);
+	if (!max14577)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, max14577);
+	max14577->dev = &i2c->dev;
+	max14577->i2c = i2c;
+	max14577->irq = i2c->irq;
+
+	max14577->regmap = devm_regmap_init_i2c(i2c, &max14577_regmap_config);
+	if (IS_ERR(max14577->regmap)) {
+		ret = PTR_ERR(max14577->regmap);
+		dev_err(max14577->dev, "Failed to allocate register map: %d\n",
+				ret);
+		return ret;
+	}
+
+	ret = max14577_read_reg(max14577->regmap, MAX14577_REG_DEVICEID,
+			&reg_data);
+	if (ret) {
+		dev_err(max14577->dev, "Device not found on this channel: %d\n",
+				ret);
+		return ret;
+	}
+	max14577->vendor_id = ((reg_data & DEVID_VENDORID_MASK) >>
+				DEVID_VENDORID_SHIFT);
+	max14577->device_id = ((reg_data & DEVID_DEVICEID_MASK) >>
+				DEVID_DEVICEID_SHIFT);
+	dev_info(max14577->dev, "Device ID: 0x%x, vendor: 0x%x\n",
+			max14577->device_id, max14577->vendor_id);
+
+	ret = regmap_add_irq_chip(max14577->regmap, max14577->irq,
+				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT, 0,
+				  &max14577_irq_chip,
+				  &max14577->irq_data);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
+				max14577->irq, ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(max14577->dev, -1, max14577_devs,
+			ARRAY_SIZE(max14577_devs), NULL, 0,
+			regmap_irq_get_domain(max14577->irq_data));
+	if (ret < 0)
+		goto err_mfd;
+
+	device_init_wakeup(max14577->dev, 1);
+
+	return 0;
+
+err_mfd:
+	regmap_del_irq_chip(max14577->irq, max14577->irq_data);
+
+	return ret;
+}
+
+static int max14577_i2c_remove(struct i2c_client *i2c)
+{
+	struct max14577 *max14577 = i2c_get_clientdata(i2c);
+
+	mfd_remove_devices(max14577->dev);
+	regmap_del_irq_chip(max14577->irq, max14577->irq_data);
+
+	return 0;
+}
+
+static const struct i2c_device_id max14577_i2c_id[] = {
+	{ "max14577", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max14577_i2c_id);
+
+static int max14577_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max14577 *max14577 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(max14577->irq);
+		/*
+		 * MUIC IRQ must be disabled during suspend if this is
+		 * a wake up source because it will be handled before
+		 * resuming I2C.
+		 *
+		 * When device is woken up from suspend (e.g. by ADC change),
+		 * an interrupt occurs before resuming I2C bus controller.
+		 * Interrupt handler tries to read registers but this read
+		 * will fail because I2C is still suspended.
+		 */
+		disable_irq(max14577->irq);
+	}
+
+	return 0;
+}
+
+static int max14577_resume(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max14577 *max14577 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(max14577->irq);
+		enable_irq(max14577->irq);
+	}
+
+	return 0;
+}
+
+static struct of_device_id max14577_dt_match[] = {
+	{ .compatible = "maxim,max14577", },
+	{},
+};
+
+static SIMPLE_DEV_PM_OPS(max14577_pm, max14577_suspend, max14577_resume);
+
+static struct i2c_driver max14577_i2c_driver = {
+	.driver = {
+		.name = "max14577",
+		.owner = THIS_MODULE,
+		.pm = &max14577_pm,
+		.of_match_table = max14577_dt_match,
+	},
+	.probe = max14577_i2c_probe,
+	.remove = max14577_i2c_remove,
+	.id_table = max14577_i2c_id,
+};
+
+static int __init max14577_i2c_init(void)
+{
+	return i2c_add_driver(&max14577_i2c_driver);
+}
+subsys_initcall(max14577_i2c_init);
+
+static void __exit max14577_i2c_exit(void)
+{
+	i2c_del_driver(&max14577_i2c_driver);
+}
+module_exit(max14577_i2c_exit);
+
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_DESCRIPTION("MAXIM 14577 multi-function core driver");
+MODULE_LICENSE("GPL");

drivers/mfd/max77686.c

@@ -35,7 +35,7 @@
 
 #define I2C_ADDR_RTC	(0x0C >> 1)
 
-static struct mfd_cell max77686_devs[] = {
+static const struct mfd_cell max77686_devs[] = {
 	{ .name = "max77686-pmic", },
 	{ .name = "max77686-rtc", },
 	{ .name = "max77686-clk", },
@@ -104,7 +104,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	max77686->irq_gpio = pdata->irq_gpio;
 	max77686->irq = i2c->irq;
 
-	max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
+	max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
 	if (IS_ERR(max77686->regmap)) {
 		ret = PTR_ERR(max77686->regmap);
 		dev_err(max77686->dev, "Failed to allocate register map: %d\n",

drivers/mfd/max77693.c

@@ -41,7 +41,7 @@
 #define I2C_ADDR_MUIC	(0x4A >> 1)
 #define I2C_ADDR_HAPTIC	(0x90 >> 1)
 
-static struct mfd_cell max77693_devs[] = {
+static const struct mfd_cell max77693_devs[] = {
 	{ .name = "max77693-pmic", },
 	{ .name = "max77693-charger", },
 	{ .name = "max77693-flash", },
@@ -107,6 +107,12 @@ static const struct regmap_config max77693_regmap_config = {
 	.max_register = MAX77693_PMIC_REG_END,
 };
 
+static const struct regmap_config max77693_regmap_muic_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77693_MUIC_REG_END,
+};
+
 static int max77693_i2c_probe(struct i2c_client *i2c,
 			      const struct i2c_device_id *id)
 {
@@ -153,7 +159,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 	 * before call max77693-muic probe() function.
 	 */
 	max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic,
-					 &max77693_regmap_config);
+					 &max77693_regmap_muic_config);
 	if (IS_ERR(max77693->regmap_muic)) {
 		ret = PTR_ERR(max77693->regmap_muic);
 		dev_err(max77693->dev,

drivers/mfd/max8907.c

@@ -22,7 +22,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
-static struct mfd_cell max8907_cells[] = {
+static const struct mfd_cell max8907_cells[] = {
 	{ .name = "max8907-regulator", },
 	{ .name = "max8907-rtc", },
 };

drivers/mfd/max8925-core.c

@@ -45,7 +45,7 @@ static struct resource touch_resources[] = {
 	},
 };
 
-static struct mfd_cell touch_devs[] = {
+static const struct mfd_cell touch_devs[] = {
 	{
 		.name		= "max8925-touch",
 		.num_resources	= 1,
@@ -63,7 +63,7 @@ static struct resource power_supply_resources[] = {
 	},
 };
 
-static struct mfd_cell power_devs[] = {
+static const struct mfd_cell power_devs[] = {
 	{
 		.name		= "max8925-power",
 		.num_resources	= 1,
@@ -81,7 +81,7 @@ static struct resource rtc_resources[] = {
 	},
 };
 
-static struct mfd_cell rtc_devs[] = {
+static const struct mfd_cell rtc_devs[] = {
 	{
 		.name		= "max8925-rtc",
 		.num_resources	= 1,
@@ -104,7 +104,7 @@ static struct resource onkey_resources[] = {
 	},
 };
 
-static struct mfd_cell onkey_devs[] = {
+static const struct mfd_cell onkey_devs[] = {
 	{
 		.name		= "max8925-onkey",
 		.num_resources	= 2,

drivers/mfd/max8997.c

@@ -40,7 +40,7 @@
 #define I2C_ADDR_RTC	(0x0C >> 1)
 #define I2C_ADDR_HAPTIC	(0x90 >> 1)
 
-static struct mfd_cell max8997_devs[] = {
+static const struct mfd_cell max8997_devs[] = {
 	{ .name = "max8997-pmic", },
 	{ .name = "max8997-rtc", },
 	{ .name = "max8997-battery", },
@@ -133,7 +133,6 @@ int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
 }
 EXPORT_SYMBOL_GPL(max8997_update_reg);
 
-#ifdef CONFIG_OF
 /*
  * Only the common platform data elements for max8997 are parsed here from the
  * device tree. Other sub-modules of max8997 such as pmic, rtc and others have
@@ -164,24 +163,15 @@ static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
 
 	return pd;
 }
-#else
-static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
-					struct device *dev)
-{
-	return 0;
-}
-#endif
 
 static inline int max8997_i2c_get_driver_data(struct i2c_client *i2c,
 						const struct i2c_device_id *id)
 {
-#ifdef CONFIG_OF
-	if (i2c->dev.of_node) {
+	if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) {
 		const struct of_device_id *match;
 		match = of_match_node(max8997_pmic_dt_match, i2c->dev.of_node);
 		return (int)match->data;
 	}
-#endif
 	return (int)id->driver_data;
 }
 
@@ -203,7 +193,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 	max8997->type = max8997_i2c_get_driver_data(i2c, id);
 	max8997->irq = i2c->irq;
 
-	if (max8997->dev->of_node) {
+	if (IS_ENABLED(CONFIG_OF) && max8997->dev->of_node) {
 		pdata = max8997_i2c_parse_dt_pdata(max8997->dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
@@ -228,18 +218,19 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 
 	max8997_irq_init(max8997);
 
-	mfd_add_devices(max8997->dev, -1, max8997_devs,
+	ret = mfd_add_devices(max8997->dev, -1, max8997_devs,
 			ARRAY_SIZE(max8997_devs),
 			NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(max8997->dev, "failed to add MFD devices %d\n", ret);
+		goto err_mfd;
+	}
 
 	/*
 	 * TODO: enable others (flash, muic, rtc, battery, ...) and
 	 * check the return value
 	 */
 
-	if (ret < 0)
-		goto err_mfd;
-
 	/* MAX8997 has a power button input. */
 	device_init_wakeup(max8997->dev, pdata->wakeup);
 

drivers/mfd/max8998.c

@@ -37,7 +37,7 @@
 
 #define RTC_I2C_ADDR		(0x0c >> 1)
 
-static struct mfd_cell max8998_devs[] = {
+static const struct mfd_cell max8998_devs[] = {
 	{
 		.name = "max8998-pmic",
 	}, {
@@ -47,7 +47,7 @@ static struct mfd_cell max8998_devs[] = {
 	},
 };
 
-static struct mfd_cell lp3974_devs[] = {
+static const struct mfd_cell lp3974_devs[] = {
 	{
 		.name = "lp3974-pmic",
 	}, {

drivers/mfd/mc13xxx-core.c

@@ -158,9 +158,6 @@ int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val)
 {
 	int ret;
 
-	if (offset > MC13XXX_NUMREGS)
-		return -EINVAL;
-
 	ret = regmap_read(mc13xxx->regmap, offset, val);
 	dev_vdbg(mc13xxx->dev, "[0x%02x] -> 0x%06x\n", offset, *val);
 
@@ -172,7 +169,7 @@ int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val)
 {
 	dev_vdbg(mc13xxx->dev, "[0x%02x] <- 0x%06x\n", offset, val);
 
-	if (offset > MC13XXX_NUMREGS || val > 0xffffff)
+	if (val >= BIT(24))
 		return -EINVAL;
 
 	return regmap_write(mc13xxx->regmap, offset, val);
@@ -639,42 +636,36 @@ static inline int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx)
 }
 #endif
 
-int mc13xxx_common_init(struct mc13xxx *mc13xxx,
-		struct mc13xxx_platform_data *pdata, int irq)
+int mc13xxx_common_init(struct device *dev)
 {
+	struct mc13xxx_platform_data *pdata = dev_get_platdata(dev);
+	struct mc13xxx *mc13xxx = dev_get_drvdata(dev);
 	int ret;
 	u32 revision;
 
-	mc13xxx_lock(mc13xxx);
+	mc13xxx->dev = dev;
 
 	ret = mc13xxx_reg_read(mc13xxx, MC13XXX_REVISION, &revision);
 	if (ret)
-		goto err_revision;
+		return ret;
 
 	mc13xxx->variant->print_revision(mc13xxx, revision);
 
 	/* mask all irqs */
 	ret = mc13xxx_reg_write(mc13xxx, MC13XXX_IRQMASK0, 0x00ffffff);
 	if (ret)
-		goto err_mask;
+		return ret;
 
 	ret = mc13xxx_reg_write(mc13xxx, MC13XXX_IRQMASK1, 0x00ffffff);
 	if (ret)
-		goto err_mask;
+		return ret;
 
-	ret = request_threaded_irq(irq, NULL, mc13xxx_irq_thread,
+	ret = request_threaded_irq(mc13xxx->irq, NULL, mc13xxx_irq_thread,
 			IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13xxx", mc13xxx);
-
-	if (ret) {
-err_mask:
-err_revision:
-		mc13xxx_unlock(mc13xxx);
+	if (ret)
 		return ret;
-	}
 
-	mc13xxx->irq = irq;
-
-	mc13xxx_unlock(mc13xxx);
+	mutex_init(&mc13xxx->lock);
 
 	if (mc13xxx_probe_flags_dt(mc13xxx) < 0 && pdata)
 		mc13xxx->flags = pdata->flags;
@@ -710,13 +701,17 @@ err_revision:
 }
 EXPORT_SYMBOL_GPL(mc13xxx_common_init);
 
-void mc13xxx_common_cleanup(struct mc13xxx *mc13xxx)
+int mc13xxx_common_exit(struct device *dev)
 {
+	struct mc13xxx *mc13xxx = dev_get_drvdata(dev);
+
 	free_irq(mc13xxx->irq, mc13xxx);
+	mfd_remove_devices(dev);
+	mutex_destroy(&mc13xxx->lock);
 
-	mfd_remove_devices(mc13xxx->dev);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(mc13xxx_common_cleanup);
+EXPORT_SYMBOL_GPL(mc13xxx_common_exit);
 
 MODULE_DESCRIPTION("Core driver for Freescale MC13XXX PMIC");
 MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");

drivers/mfd/mc13xxx-i2c.c

@@ -10,7 +10,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/mutex.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/mc13xxx.h>
 #include <linux/of.h>
@@ -60,7 +59,6 @@ static int mc13xxx_i2c_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
 	struct mc13xxx *mc13xxx;
-	struct mc13xxx_platform_data *pdata = dev_get_platdata(&client->dev);
 	int ret;
 
 	mc13xxx = devm_kzalloc(&client->dev, sizeof(*mc13xxx), GFP_KERNEL);
@@ -69,15 +67,13 @@ static int mc13xxx_i2c_probe(struct i2c_client *client,
 
 	dev_set_drvdata(&client->dev, mc13xxx);
 
-	mc13xxx->dev = &client->dev;
-	mutex_init(&mc13xxx->lock);
+	mc13xxx->irq = client->irq;
 
 	mc13xxx->regmap = devm_regmap_init_i2c(client,
 					       &mc13xxx_regmap_i2c_config);
 	if (IS_ERR(mc13xxx->regmap)) {
 		ret = PTR_ERR(mc13xxx->regmap);
-		dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
-				ret);
+		dev_err(&client->dev, "Failed to initialize regmap: %d\n", ret);
 		return ret;
 	}
 
@@ -89,18 +85,12 @@ static int mc13xxx_i2c_probe(struct i2c_client *client,
 		mc13xxx->variant = (void *)id->driver_data;
 	}
 
-	ret = mc13xxx_common_init(mc13xxx, pdata, client->irq);
-
-	return ret;
+	return mc13xxx_common_init(&client->dev);
 }
 
 static int mc13xxx_i2c_remove(struct i2c_client *client)
 {
-	struct mc13xxx *mc13xxx = dev_get_drvdata(&client->dev);
-
-	mc13xxx_common_cleanup(mc13xxx);
-
-	return 0;
+	return mc13xxx_common_exit(&client->dev);
 }
 
 static struct i2c_driver mc13xxx_i2c_driver = {

drivers/mfd/mc13xxx-spi.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/mc13xxx.h>
@@ -129,27 +128,24 @@ static struct regmap_bus regmap_mc13xxx_bus = {
 static int mc13xxx_spi_probe(struct spi_device *spi)
 {
 	struct mc13xxx *mc13xxx;
-	struct mc13xxx_platform_data *pdata = dev_get_platdata(&spi->dev);
 	int ret;
 
 	mc13xxx = devm_kzalloc(&spi->dev, sizeof(*mc13xxx), GFP_KERNEL);
 	if (!mc13xxx)
 		return -ENOMEM;
 
-	spi_set_drvdata(spi, mc13xxx);
+	dev_set_drvdata(&spi->dev, mc13xxx);
+
 	spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
 
-	mc13xxx->dev = &spi->dev;
-	mutex_init(&mc13xxx->lock);
+	mc13xxx->irq = spi->irq;
 
 	mc13xxx->regmap = devm_regmap_init(&spi->dev, &regmap_mc13xxx_bus,
 					   &spi->dev,
 					   &mc13xxx_regmap_spi_config);
 	if (IS_ERR(mc13xxx->regmap)) {
 		ret = PTR_ERR(mc13xxx->regmap);
-		dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
-				ret);
-		spi_set_drvdata(spi, NULL);
+		dev_err(&spi->dev, "Failed to initialize regmap: %d\n", ret);
 		return ret;
 	}
 
@@ -164,16 +160,12 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
 		mc13xxx->variant = (void *)id_entry->driver_data;
 	}
 
-	return mc13xxx_common_init(mc13xxx, pdata, spi->irq);
+	return mc13xxx_common_init(&spi->dev);
 }
 
 static int mc13xxx_spi_remove(struct spi_device *spi)
 {
-	struct mc13xxx *mc13xxx = spi_get_drvdata(spi);
-
-	mc13xxx_common_cleanup(mc13xxx);
-
-	return 0;
+	return mc13xxx_common_exit(&spi->dev);
 }
 
 static struct spi_driver mc13xxx_spi_driver = {

drivers/mfd/mc13xxx.h

@@ -43,9 +43,7 @@ struct mc13xxx {
 	int adcflags;
 };
 
-int mc13xxx_common_init(struct mc13xxx *mc13xxx,
-		struct mc13xxx_platform_data *pdata, int irq);
-
-void mc13xxx_common_cleanup(struct mc13xxx *mc13xxx);
+int mc13xxx_common_init(struct device *dev);
+int mc13xxx_common_exit(struct device *dev);
 
 #endif /* __DRIVERS_MFD_MC13XXX_H */

drivers/mfd/omap-usb-host.c

@@ -121,22 +121,22 @@ static u64 usbhs_dmamask = DMA_BIT_MASK(32);
 
 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
 {
-	__raw_writel(val, base + reg);
+	writel_relaxed(val, base + reg);
 }
 
 static inline u32 usbhs_read(void __iomem *base, u32 reg)
 {
-	return __raw_readl(base + reg);
+	return readl_relaxed(base + reg);
 }
 
 static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
 {
-	__raw_writeb(val, base + reg);
+	writeb_relaxed(val, base + reg);
 }
 
 static inline u8 usbhs_readb(void __iomem *base, u8 reg)
 {
-	return __raw_readb(base + reg);
+	return readb_relaxed(base + reg);
 }
 
 /*-------------------------------------------------------------------------*/

drivers/mfd/omap-usb-tll.c

@@ -121,22 +121,22 @@ static DEFINE_SPINLOCK(tll_lock);	/* serialize access to tll_dev */
 
 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
 {
-	__raw_writel(val, base + reg);
+	writel_relaxed(val, base + reg);
 }
 
 static inline u32 usbtll_read(void __iomem *base, u32 reg)
 {
-	return __raw_readl(base + reg);
+	return readl_relaxed(base + reg);
 }
 
 static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
 {
-	__raw_writeb(val, base + reg);
+	writeb_relaxed(val, base + reg);
 }
 
 static inline u8 usbtll_readb(void __iomem *base, u8 reg)
 {
-	return __raw_readb(base + reg);
+	return readb_relaxed(base + reg);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -333,21 +333,17 @@ int omap_tll_init(struct usbhs_omap_platform_data *pdata)
 	unsigned reg;
 	struct usbtll_omap *tll;
 
-	spin_lock(&tll_lock);
-
-	if (!tll_dev) {
-		spin_unlock(&tll_lock);
+	if (!tll_dev)
 		return -ENODEV;
-	}
 
-	tll = dev_get_drvdata(tll_dev);
+	pm_runtime_get_sync(tll_dev);
 
+	spin_lock(&tll_lock);
+	tll = dev_get_drvdata(tll_dev);
 	needs_tll = false;
 	for (i = 0; i < tll->nch; i++)
 		needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
 
-	pm_runtime_get_sync(tll_dev);
-
 	if (needs_tll) {
 		void __iomem *base = tll->base;
 
@@ -398,9 +394,8 @@ int omap_tll_init(struct usbhs_omap_platform_data *pdata)
 		}
 	}
 
-	pm_runtime_put_sync(tll_dev);
-
 	spin_unlock(&tll_lock);
+	pm_runtime_put_sync(tll_dev);
 
 	return 0;
 }
@@ -411,17 +406,14 @@ int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
 	int i;
 	struct usbtll_omap *tll;
 
-	spin_lock(&tll_lock);
-
-	if (!tll_dev) {
-		spin_unlock(&tll_lock);
+	if (!tll_dev)
 		return -ENODEV;
-	}
-
-	tll = dev_get_drvdata(tll_dev);
 
 	pm_runtime_get_sync(tll_dev);
 
+	spin_lock(&tll_lock);
+	tll = dev_get_drvdata(tll_dev);
+
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			int r;
@@ -448,13 +440,10 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
 	int i;
 	struct usbtll_omap *tll;
 
-	spin_lock(&tll_lock);
-
-	if (!tll_dev) {
-		spin_unlock(&tll_lock);
+	if (!tll_dev)
 		return -ENODEV;
-	}
 
+	spin_lock(&tll_lock);
 	tll = dev_get_drvdata(tll_dev);
 
 	for (i = 0; i < tll->nch; i++) {
@@ -464,9 +453,8 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
 		}
 	}
 
-	pm_runtime_put_sync(tll_dev);
-
 	spin_unlock(&tll_lock);
+	pm_runtime_put_sync(tll_dev);
 
 	return 0;
 }

drivers/mfd/rc5t583.c

@@ -74,7 +74,7 @@ static struct deepsleep_control_data deepsleep_data[] = {
 #define EXT_PWR_REQ		\
 	(RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL)
 
-static struct mfd_cell rc5t583_subdevs[] = {
+static const struct mfd_cell rc5t583_subdevs[] = {
 	{.name = "rc5t583-gpio",},
 	{.name = "rc5t583-regulator",},
 	{.name = "rc5t583-rtc",      },

drivers/mfd/rdc321x-southbridge.c

@@ -56,7 +56,7 @@ static struct resource rdc321x_gpio_resources[] = {
 	}
 };
 
-static struct mfd_cell rdc321x_sb_cells[] = {
+static const struct mfd_cell rdc321x_sb_cells[] = {
 	{
 		.name		= "rdc321x-wdt",
 		.resources	= rdc321x_wdt_resource,
@@ -96,7 +96,7 @@ static void rdc321x_sb_remove(struct pci_dev *pdev)
 	mfd_remove_devices(&pdev->dev);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(rdc321x_sb_table) = {
+static const struct pci_device_id rdc321x_sb_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030) },
 	{}
 };

drivers/mfd/retu-mfd.c

@@ -55,7 +55,7 @@ static struct resource retu_pwrbutton_res[] = {
 	},
 };
 
-static struct mfd_cell retu_devs[] = {
+static const struct mfd_cell retu_devs[] = {
 	{
 		.name		= "retu-wdt"
 	},
@@ -94,7 +94,7 @@ static struct resource tahvo_usb_res[] = {
 	},
 };
 
-static struct mfd_cell tahvo_devs[] = {
+static const struct mfd_cell tahvo_devs[] = {
 	{
 		.name		= "tahvo-usb",
 		.resources	= tahvo_usb_res,
@@ -122,7 +122,7 @@ static const struct retu_data {
 	char			*chip_name;
 	char			*companion_name;
 	struct regmap_irq_chip	*irq_chip;
-	struct mfd_cell		*children;
+	const struct mfd_cell	*children;
 	int			nchildren;
 } retu_data[] = {
 	[0] = {

drivers/mfd/rtl8411.c

@@ -49,8 +49,8 @@ static int rtl8411b_is_qfn48(struct rtsx_pcr *pcr)
 
 static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr)
 {
-	u32 reg1;
-	u8 reg3;
+	u32 reg1 = 0;
+	u8 reg3 = 0;
 
 	rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg1);
 	dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg1);
@@ -71,7 +71,7 @@ static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr)
 
 static void rtl8411b_fetch_vendor_settings(struct rtsx_pcr *pcr)
 {
-	u32 reg;
+	u32 reg = 0;
 
 	rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
 	dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
@@ -191,24 +191,25 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
 			BPP_LDO_POWB, BPP_LDO_SUSPEND);
 }
 
-static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+static int rtl8411_do_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage,
+		int bpp_tuned18_shift, int bpp_asic_1v8)
 {
 	u8 mask, val;
 	int err;
 
-	mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
+	mask = (BPP_REG_TUNED18 << bpp_tuned18_shift) | BPP_PAD_MASK;
 	if (voltage == OUTPUT_3V3) {
 		err = rtsx_pci_write_register(pcr,
 				SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
 		if (err < 0)
 			return err;
-		val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
+		val = (BPP_ASIC_3V3 << bpp_tuned18_shift) | BPP_PAD_3V3;
 	} else if (voltage == OUTPUT_1V8) {
 		err = rtsx_pci_write_register(pcr,
 				SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
 		if (err < 0)
 			return err;
-		val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
+		val = (bpp_asic_1v8 << bpp_tuned18_shift) | BPP_PAD_1V8;
 	} else {
 		return -EINVAL;
 	}
@@ -216,6 +217,18 @@ static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 	return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
 }
 
+static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	return rtl8411_do_switch_output_voltage(pcr, voltage,
+			BPP_TUNED18_SHIFT_8411, BPP_ASIC_1V8);
+}
+
+static int rtl8402_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	return rtl8411_do_switch_output_voltage(pcr, voltage,
+			BPP_TUNED18_SHIFT_8402, BPP_ASIC_2V0);
+}
+
 static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
 {
 	unsigned int card_exist;
@@ -295,6 +308,22 @@ static const struct pcr_ops rtl8411_pcr_ops = {
 	.force_power_down = rtl8411_force_power_down,
 };
 
+static const struct pcr_ops rtl8402_pcr_ops = {
+	.fetch_vendor_settings = rtl8411_fetch_vendor_settings,
+	.extra_init_hw = rtl8411_extra_init_hw,
+	.optimize_phy = NULL,
+	.turn_on_led = rtl8411_turn_on_led,
+	.turn_off_led = rtl8411_turn_off_led,
+	.enable_auto_blink = rtl8411_enable_auto_blink,
+	.disable_auto_blink = rtl8411_disable_auto_blink,
+	.card_power_on = rtl8411_card_power_on,
+	.card_power_off = rtl8411_card_power_off,
+	.switch_output_voltage = rtl8402_switch_output_voltage,
+	.cd_deglitch = rtl8411_cd_deglitch,
+	.conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
+	.force_power_down = rtl8411_force_power_down,
+};
+
 static const struct pcr_ops rtl8411b_pcr_ops = {
 	.fetch_vendor_settings = rtl8411b_fetch_vendor_settings,
 	.extra_init_hw = rtl8411b_extra_init_hw,
@@ -441,12 +470,10 @@ static const u32 rtl8411b_qfn48_ms_pull_ctl_disable_tbl[] = {
 	0,
 };
 
-void rtl8411_init_params(struct rtsx_pcr *pcr)
+static void rtl8411_init_common_params(struct rtsx_pcr *pcr)
 {
 	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
 	pcr->num_slots = 2;
-	pcr->ops = &rtl8411_pcr_ops;
-
 	pcr->flags = 0;
 	pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
 	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
@@ -454,47 +481,29 @@ void rtl8411_init_params(struct rtsx_pcr *pcr)
 	pcr->aspm_en = ASPM_L1_EN;
 	pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
 	pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
-
 	pcr->ic_version = rtl8411_get_ic_version(pcr);
-	pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
-	pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
-	pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
-	pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
+}
+
+void rtl8411_init_params(struct rtsx_pcr *pcr)
+{
+	rtl8411_init_common_params(pcr);
+	pcr->ops = &rtl8411_pcr_ops;
+	set_pull_ctrl_tables(pcr, rtl8411);
 }
 
 void rtl8411b_init_params(struct rtsx_pcr *pcr)
 {
-	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
-	pcr->num_slots = 2;
+	rtl8411_init_common_params(pcr);
 	pcr->ops = &rtl8411b_pcr_ops;
+	if (rtl8411b_is_qfn48(pcr))
+		set_pull_ctrl_tables(pcr, rtl8411b_qfn48);
+	else
+		set_pull_ctrl_tables(pcr, rtl8411b_qfn64);
+}
 
-	pcr->flags = 0;
-	pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
-	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
-	pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
-	pcr->aspm_en = ASPM_L1_EN;
-	pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
-	pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
-
-	pcr->ic_version = rtl8411_get_ic_version(pcr);
-
-	if (rtl8411b_is_qfn48(pcr)) {
-		pcr->sd_pull_ctl_enable_tbl =
-			rtl8411b_qfn48_sd_pull_ctl_enable_tbl;
-		pcr->sd_pull_ctl_disable_tbl =
-			rtl8411b_qfn48_sd_pull_ctl_disable_tbl;
-		pcr->ms_pull_ctl_enable_tbl =
-			rtl8411b_qfn48_ms_pull_ctl_enable_tbl;
-		pcr->ms_pull_ctl_disable_tbl =
-			rtl8411b_qfn48_ms_pull_ctl_disable_tbl;
-	} else {
-		pcr->sd_pull_ctl_enable_tbl =
-			rtl8411b_qfn64_sd_pull_ctl_enable_tbl;
-		pcr->sd_pull_ctl_disable_tbl =
-			rtl8411b_qfn64_sd_pull_ctl_disable_tbl;
-		pcr->ms_pull_ctl_enable_tbl =
-			rtl8411b_qfn64_ms_pull_ctl_enable_tbl;
-		pcr->ms_pull_ctl_disable_tbl =
-			rtl8411b_qfn64_ms_pull_ctl_disable_tbl;
-	}
+void rtl8402_init_params(struct rtsx_pcr *pcr)
+{
+	rtl8411_init_common_params(pcr);
+	pcr->ops = &rtl8402_pcr_ops;
+	set_pull_ctrl_tables(pcr, rtl8411);
 }

drivers/mfd/rtsx_pcr.c

@@ -50,13 +50,14 @@ static struct mfd_cell rtsx_pcr_cells[] = {
 	},
 };
 
-static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
+static const struct pci_device_id rtsx_pci_ids[] = {
 	{ PCI_DEVICE(0x10EC, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ 0, }
 };
 
@@ -1061,6 +1062,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
 	case 0x5287:
 		rtl8411b_init_params(pcr);
 		break;
+
+	case 0x5286:
+		rtl8402_init_params(pcr);
+		break;
 	}
 
 	dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",

drivers/mfd/rtsx_pcr.h

@@ -30,6 +30,7 @@
 void rts5209_init_params(struct rtsx_pcr *pcr);
 void rts5229_init_params(struct rtsx_pcr *pcr);
 void rtl8411_init_params(struct rtsx_pcr *pcr);
+void rtl8402_init_params(struct rtsx_pcr *pcr);
 void rts5227_init_params(struct rtsx_pcr *pcr);
 void rts5249_init_params(struct rtsx_pcr *pcr);
 void rtl8411b_init_params(struct rtsx_pcr *pcr);
@@ -63,4 +64,12 @@ static inline u8 map_sd_drive(int idx)
 #define rtl8411_reg_to_sd30_drive_sel_3v3(reg)	(((reg) >> 5) & 0x07)
 #define rtl8411b_reg_to_sd30_drive_sel_3v3(reg)	((reg) & 0x03)
 
+#define set_pull_ctrl_tables(pcr, __device)				\
+do {									\
+	pcr->sd_pull_ctl_enable_tbl  = __device##_sd_pull_ctl_enable_tbl;  \
+	pcr->sd_pull_ctl_disable_tbl = __device##_sd_pull_ctl_disable_tbl; \
+	pcr->ms_pull_ctl_enable_tbl  = __device##_ms_pull_ctl_enable_tbl;  \
+	pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
+} while (0)
+
 #endif

drivers/mfd/sec-core.c

@@ -31,7 +31,7 @@
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/regmap.h>
 
-static struct mfd_cell s5m8751_devs[] = {
+static const struct mfd_cell s5m8751_devs[] = {
 	{
 		.name = "s5m8751-pmic",
 	}, {
@@ -41,7 +41,7 @@ static struct mfd_cell s5m8751_devs[] = {
 	},
 };
 
-static struct mfd_cell s5m8763_devs[] = {
+static const struct mfd_cell s5m8763_devs[] = {
 	{
 		.name = "s5m8763-pmic",
 	}, {
@@ -51,15 +51,17 @@ static struct mfd_cell s5m8763_devs[] = {
 	},
 };
 
-static struct mfd_cell s5m8767_devs[] = {
+static const struct mfd_cell s5m8767_devs[] = {
 	{
 		.name = "s5m8767-pmic",
 	}, {
 		.name = "s5m-rtc",
-	},
+	}, {
+		.name = "s5m8767-clk",
+	}
 };
 
-static struct mfd_cell s2mps11_devs[] = {
+static const struct mfd_cell s2mps11_devs[] = {
 	{
 		.name = "s2mps11-pmic",
 	}, {
@@ -134,12 +136,12 @@ static bool s5m8763_volatile(struct device *dev, unsigned int reg)
 	}
 }
 
-static struct regmap_config sec_regmap_config = {
+static const struct regmap_config sec_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };
 
-static struct regmap_config s2mps11_regmap_config = {
+static const struct regmap_config s2mps11_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 
@@ -148,7 +150,7 @@ static struct regmap_config s2mps11_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
-static struct regmap_config s5m8763_regmap_config = {
+static const struct regmap_config s5m8763_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 
@@ -157,7 +159,7 @@ static struct regmap_config s5m8763_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
-static struct regmap_config s5m8767_regmap_config = {
+static const struct regmap_config s5m8767_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 
@@ -204,7 +206,7 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
 static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
 					struct device *dev)
 {
-	return 0;
+	return NULL;
 }
 #endif
 
@@ -323,6 +325,8 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	if (ret)
 		goto err;
 
+	device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup);
+
 	return ret;
 
 err:
@@ -341,6 +345,43 @@ static int sec_pmic_remove(struct i2c_client *i2c)
 	return 0;
 }
 
+static int sec_pmic_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(sec_pmic->irq);
+		/*
+		 * PMIC IRQ must be disabled during suspend for RTC alarm
+		 * to work properly.
+		 * When device is woken up from suspend by RTC Alarm, an
+		 * interrupt occurs before resuming I2C bus controller.
+		 * The interrupt is handled by regmap_irq_thread which tries
+		 * to read RTC registers. This read fails (I2C is still
+		 * suspended) and RTC Alarm interrupt is disabled.
+		 */
+		disable_irq(sec_pmic->irq);
+	}
+
+	return 0;
+}
+
+static int sec_pmic_resume(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(sec_pmic->irq);
+		enable_irq(sec_pmic->irq);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume);
+
 static const struct i2c_device_id sec_pmic_id[] = {
 	{ "sec_pmic", 0 },
 	{ }
@@ -351,6 +392,7 @@ static struct i2c_driver sec_pmic_driver = {
 	.driver = {
 		   .name = "sec_pmic",
 		   .owner = THIS_MODULE,
+		   .pm = &sec_pmic_pm_ops,
 		   .of_match_table = of_match_ptr(sec_dt_match),
 	},
 	.probe = sec_pmic_probe,

drivers/mfd/sec-irq.c

@@ -22,7 +22,7 @@
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 
-static struct regmap_irq s2mps11_irqs[] = {
+static const struct regmap_irq s2mps11_irqs[] = {
 	[S2MPS11_IRQ_PWRONF] = {
 		.reg_offset = 0,
 		.mask = S2MPS11_IRQ_PWRONF_MASK,
@@ -90,7 +90,7 @@ static struct regmap_irq s2mps11_irqs[] = {
 };
 
 
-static struct regmap_irq s5m8767_irqs[] = {
+static const struct regmap_irq s5m8767_irqs[] = {
 	[S5M8767_IRQ_PWRR] = {
 		.reg_offset = 0,
 		.mask = S5M8767_IRQ_PWRR_MASK,
@@ -161,7 +161,7 @@ static struct regmap_irq s5m8767_irqs[] = {
 	},
 };
 
-static struct regmap_irq s5m8763_irqs[] = {
+static const struct regmap_irq s5m8763_irqs[] = {
 	[S5M8763_IRQ_DCINF] = {
 		.reg_offset = 0,
 		.mask = S5M8763_IRQ_DCINF_MASK,
@@ -236,7 +236,7 @@ static struct regmap_irq s5m8763_irqs[] = {
 	},
 };
 
-static struct regmap_irq_chip s2mps11_irq_chip = {
+static const struct regmap_irq_chip s2mps11_irq_chip = {
 	.name = "s2mps11",
 	.irqs = s2mps11_irqs,
 	.num_irqs = ARRAY_SIZE(s2mps11_irqs),
@@ -246,7 +246,7 @@ static struct regmap_irq_chip s2mps11_irq_chip = {
 	.ack_base = S2MPS11_REG_INT1,
 };
 
-static struct regmap_irq_chip s5m8767_irq_chip = {
+static const struct regmap_irq_chip s5m8767_irq_chip = {
 	.name = "s5m8767",
 	.irqs = s5m8767_irqs,
 	.num_irqs = ARRAY_SIZE(s5m8767_irqs),
@@ -256,7 +256,7 @@ static struct regmap_irq_chip s5m8767_irq_chip = {
 	.ack_base = S5M8767_REG_INT1,
 };
 
-static struct regmap_irq_chip s5m8763_irq_chip = {
+static const struct regmap_irq_chip s5m8763_irq_chip = {
 	.name = "s5m8763",
 	.irqs = s5m8763_irqs,
 	.num_irqs = ARRAY_SIZE(s5m8763_irqs),

drivers/mfd/sm501.c

@@ -1710,7 +1710,7 @@ static int sm501_plat_remove(struct platform_device *dev)
 	return 0;
 }
 
-static DEFINE_PCI_DEVICE_TABLE(sm501_pci_tbl) = {
+static const struct pci_device_id sm501_pci_tbl[] = {
 	{ 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0, },
 };

drivers/mfd/ssbi.c

@@ -65,13 +65,19 @@
 
 #define SSBI_TIMEOUT_US			100
 
+enum ssbi_controller_type {
+	MSM_SBI_CTRL_SSBI = 0,
+	MSM_SBI_CTRL_SSBI2,
+	MSM_SBI_CTRL_PMIC_ARBITER,
+};
+
 struct ssbi {
 	struct device		*slave;
 	void __iomem		*base;
 	spinlock_t		lock;
 	enum ssbi_controller_type controller_type;
 	int (*read)(struct ssbi *, u16 addr, u8 *buf, int len);
-	int (*write)(struct ssbi *, u16 addr, u8 *buf, int len);
+	int (*write)(struct ssbi *, u16 addr, const u8 *buf, int len);
 };
 
 #define to_ssbi(dev)	platform_get_drvdata(to_platform_device(dev))
@@ -140,7 +146,7 @@ err:
 }
 
 static int
-ssbi_write_bytes(struct ssbi *ssbi, u16 addr, u8 *buf, int len)
+ssbi_write_bytes(struct ssbi *ssbi, u16 addr, const u8 *buf, int len)
 {
 	int ret = 0;
 
@@ -217,7 +223,7 @@ err:
 }
 
 static int
-ssbi_pa_write_bytes(struct ssbi *ssbi, u16 addr, u8 *buf, int len)
+ssbi_pa_write_bytes(struct ssbi *ssbi, u16 addr, const u8 *buf, int len)
 {
 	u32 cmd;
 	int ret = 0;
@@ -249,7 +255,7 @@ int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len)
 }
 EXPORT_SYMBOL_GPL(ssbi_read);
 
-int ssbi_write(struct device *dev, u16 addr, u8 *buf, int len)
+int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len)
 {
 	struct ssbi *ssbi = to_ssbi(dev);
 	unsigned long flags;
@@ -311,7 +317,7 @@ static int ssbi_probe(struct platform_device *pdev)
 	return of_platform_populate(np, NULL, NULL, &pdev->dev);
 }
 
-static struct of_device_id ssbi_match_table[] = {
+static const struct of_device_id ssbi_match_table[] = {
 	{ .compatible = "qcom,ssbi" },
 	{}
 };

drivers/mfd/sta2x11-mfd.c

@@ -339,7 +339,7 @@ static int sta2x11_mfd_platform_probe(struct platform_device *dev,
 	regmap_config->cache_type = REGCACHE_NONE;
 	mfd->regmap[index] = devm_regmap_init_mmio(&dev->dev, mfd->regs[index],
 						   regmap_config);
-	WARN_ON(!mfd->regmap[index]);
+	WARN_ON(IS_ERR(mfd->regmap[index]));
 
 	return 0;
 }
@@ -529,7 +529,7 @@ static int sta2x11_mfd_resume(struct pci_dev *pdev)
 {
 	int err;
 
-	pci_set_power_state(pdev, 0);
+	pci_set_power_state(pdev, PCI_D0);
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
@@ -642,7 +642,7 @@ err_disable:
 	return err;
 }
 
-static DEFINE_PCI_DEVICE_TABLE(sta2x11_mfd_tbl) = {
+static const struct pci_device_id sta2x11_mfd_tbl[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_GPIO)},
 	{PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_VIC)},
 	{0,},

drivers/mfd/stmpe.c

@@ -297,14 +297,14 @@ static struct resource stmpe_gpio_resources[] = {
 	},
 };
 
-static struct mfd_cell stmpe_gpio_cell = {
+static const struct mfd_cell stmpe_gpio_cell = {
 	.name		= "stmpe-gpio",
 	.of_compatible	= "st,stmpe-gpio",
 	.resources	= stmpe_gpio_resources,
 	.num_resources	= ARRAY_SIZE(stmpe_gpio_resources),
 };
 
-static struct mfd_cell stmpe_gpio_cell_noirq = {
+static const struct mfd_cell stmpe_gpio_cell_noirq = {
 	.name		= "stmpe-gpio",
 	.of_compatible	= "st,stmpe-gpio",
 	/* gpio cell resources consist of an irq only so no resources here */
@@ -325,7 +325,7 @@ static struct resource stmpe_keypad_resources[] = {
 	},
 };
 
-static struct mfd_cell stmpe_keypad_cell = {
+static const struct mfd_cell stmpe_keypad_cell = {
 	.name		= "stmpe-keypad",
 	.of_compatible  = "st,stmpe-keypad",
 	.resources	= stmpe_keypad_resources,
@@ -409,7 +409,7 @@ static struct resource stmpe_ts_resources[] = {
 	},
 };
 
-static struct mfd_cell stmpe_ts_cell = {
+static const struct mfd_cell stmpe_ts_cell = {
 	.name		= "stmpe-ts",
 	.of_compatible	= "st,stmpe-ts",
 	.resources	= stmpe_ts_resources,
@@ -1064,7 +1064,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
 	return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
 }
 
-static int stmpe_add_device(struct stmpe *stmpe, struct mfd_cell *cell)
+static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
 {
 	return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
 			       NULL, stmpe->irq_base, stmpe->domain);

drivers/mfd/stmpe.h

@@ -38,7 +38,7 @@ static inline void stmpe_dump_bytes(const char *str, const void *buf,
  *		enable and altfunc callbacks
  */
 struct stmpe_variant_block {
-	struct mfd_cell		*cell;
+	const struct mfd_cell	*cell;
 	int			irq;
 	enum stmpe_block	block;
 };

drivers/mfd/tc3589x.c

@@ -155,7 +155,7 @@ static struct resource keypad_resources[] = {
 	},
 };
 
-static struct mfd_cell tc3589x_dev_gpio[] = {
+static const struct mfd_cell tc3589x_dev_gpio[] = {
 	{
 		.name		= "tc3589x-gpio",
 		.num_resources	= ARRAY_SIZE(gpio_resources),
@@ -164,7 +164,7 @@ static struct mfd_cell tc3589x_dev_gpio[] = {
 	},
 };
 
-static struct mfd_cell tc3589x_dev_keypad[] = {
+static const struct mfd_cell tc3589x_dev_keypad[] = {
 	{
 		.name           = "tc3589x-keypad",
 		.num_resources  = ARRAY_SIZE(keypad_resources),

drivers/mfd/tc6387xb.c

@@ -126,7 +126,7 @@ static struct tmio_mmc_data tc6387xb_mmc_data = {
 
 /*--------------------------------------------------------------------------*/
 
-static struct mfd_cell tc6387xb_cells[] = {
+static const struct mfd_cell tc6387xb_cells[] = {
 	[TC6387XB_CELL_MMC] = {
 		.name = "tmio-mmc",
 		.enable = tc6387xb_mmc_enable,

drivers/mfd/ti_am335x_tscadc.c

@@ -24,6 +24,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/sched.h>
 
 #include <linux/mfd/ti_am335x_tscadc.h>
 
@@ -48,32 +49,79 @@ static const struct regmap_config tscadc_regmap_config = {
 	.val_bits = 32,
 };
 
-void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc)
+void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tsadc, u32 val)
 {
-	tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tsadc->reg_lock, flags);
+	tsadc->reg_se_cache = val;
+	if (tsadc->adc_waiting)
+		wake_up(&tsadc->reg_se_wait);
+	else if (!tsadc->adc_in_use)
+		tscadc_writel(tsadc, REG_SE, val);
+
+	spin_unlock_irqrestore(&tsadc->reg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(am335x_tsc_se_set_cache);
+
+static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc)
+{
+	DEFINE_WAIT(wait);
+	u32 reg;
+
+	/*
+	 * disable TSC steps so it does not run while the ADC is using it. If
+	 * write 0 while it is running (it just started or was already running)
+	 * then it completes all steps that were enabled and stops then.
+	 */
+	tscadc_writel(tsadc, REG_SE, 0);
+	reg = tscadc_readl(tsadc, REG_ADCFSM);
+	if (reg & SEQ_STATUS) {
+		tsadc->adc_waiting = true;
+		prepare_to_wait(&tsadc->reg_se_wait, &wait,
+				TASK_UNINTERRUPTIBLE);
+		spin_unlock_irq(&tsadc->reg_lock);
+
+		schedule();
+
+		spin_lock_irq(&tsadc->reg_lock);
+		finish_wait(&tsadc->reg_se_wait, &wait);
+
+		reg = tscadc_readl(tsadc, REG_ADCFSM);
+		WARN_ON(reg & SEQ_STATUS);
+		tsadc->adc_waiting = false;
+	}
+	tsadc->adc_in_use = true;
+}
+
+void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val)
+{
+	spin_lock_irq(&tsadc->reg_lock);
+	am335x_tscadc_need_adc(tsadc);
+
+	tscadc_writel(tsadc, REG_SE, val);
+	spin_unlock_irq(&tsadc->reg_lock);
 }
-EXPORT_SYMBOL_GPL(am335x_tsc_se_update);
+EXPORT_SYMBOL_GPL(am335x_tsc_se_set_once);
 
-void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val)
+void am335x_tsc_se_adc_done(struct ti_tscadc_dev *tsadc)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&tsadc->reg_lock, flags);
-	tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE);
-	tsadc->reg_se_cache |= val;
-	am335x_tsc_se_update(tsadc);
+	tsadc->adc_in_use = false;
+	tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache);
 	spin_unlock_irqrestore(&tsadc->reg_lock, flags);
 }
-EXPORT_SYMBOL_GPL(am335x_tsc_se_set);
+EXPORT_SYMBOL_GPL(am335x_tsc_se_adc_done);
 
 void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&tsadc->reg_lock, flags);
-	tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE);
 	tsadc->reg_se_cache &= ~val;
-	am335x_tsc_se_update(tsadc);
+	tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache);
 	spin_unlock_irqrestore(&tsadc->reg_lock, flags);
 }
 EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
@@ -181,6 +229,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	}
 
 	spin_lock_init(&tscadc->reg_lock);
+	init_waitqueue_head(&tscadc->reg_se_wait);
+
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
@@ -302,7 +352,6 @@ static int tscadc_resume(struct device *dev)
 
 	if (tscadc_dev->tsc_cell != -1)
 		tscadc_idle_config(tscadc_dev);
-	am335x_tsc_se_update(tscadc_dev);
 	restore = tscadc_readl(tscadc_dev, REG_CTRL);
 	tscadc_writel(tscadc_dev, REG_CTRL,
 			(restore | CNTRLREG_TSCSSENB));

drivers/mfd/timberdale.c

@@ -374,7 +374,7 @@ static const struct resource timberdale_dma_resources[] = {
 	},
 };
 
-static struct mfd_cell timberdale_cells_bar0_cfg0[] = {
+static const struct mfd_cell timberdale_cells_bar0_cfg0[] = {
 	{
 		.name = "timb-dma",
 		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -431,7 +431,7 @@ static struct mfd_cell timberdale_cells_bar0_cfg0[] = {
 	},
 };
 
-static struct mfd_cell timberdale_cells_bar0_cfg1[] = {
+static const struct mfd_cell timberdale_cells_bar0_cfg1[] = {
 	{
 		.name = "timb-dma",
 		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -498,7 +498,7 @@ static struct mfd_cell timberdale_cells_bar0_cfg1[] = {
 	},
 };
 
-static struct mfd_cell timberdale_cells_bar0_cfg2[] = {
+static const struct mfd_cell timberdale_cells_bar0_cfg2[] = {
 	{
 		.name = "timb-dma",
 		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -548,7 +548,7 @@ static struct mfd_cell timberdale_cells_bar0_cfg2[] = {
 	},
 };
 
-static struct mfd_cell timberdale_cells_bar0_cfg3[] = {
+static const struct mfd_cell timberdale_cells_bar0_cfg3[] = {
 	{
 		.name = "timb-dma",
 		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
@@ -619,7 +619,7 @@ static const struct resource timberdale_sdhc_resources[] = {
 	},
 };
 
-static struct mfd_cell timberdale_cells_bar1[] = {
+static const struct mfd_cell timberdale_cells_bar1[] = {
 	{
 		.name = "sdhci",
 		.num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
@@ -627,7 +627,7 @@ static struct mfd_cell timberdale_cells_bar1[] = {
 	},
 };
 
-static struct mfd_cell timberdale_cells_bar2[] = {
+static const struct mfd_cell timberdale_cells_bar2[] = {
 	{
 		.name = "sdhci",
 		.num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
@@ -851,7 +851,7 @@ static void timb_remove(struct pci_dev *dev)
 	kfree(priv);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(timberdale_pci_tbl) = {
+static const struct pci_device_id timberdale_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TIMB, PCI_DEVICE_ID_TIMB) },
 	{ 0 }
 };

drivers/mfd/tps6507x.c

@@ -24,7 +24,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6507x.h>
 
-static struct mfd_cell tps6507x_devs[] = {
+static const struct mfd_cell tps6507x_devs[] = {
 	{
 		.name = "tps6507x-pmic",
 	},

drivers/mfd/tps65090.c

@@ -64,7 +64,7 @@ static struct resource charger_resources[] = {
 	}
 };
 
-static struct mfd_cell tps65090s[] = {
+static const struct mfd_cell tps65090s[] = {
 	{
 		.name = "tps65090-pmic",
 	},

drivers/mfd/tps65217.c

@@ -30,7 +30,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps65217.h>
 
-static struct mfd_cell tps65217s[] = {
+static const struct mfd_cell tps65217s[] = {
 	{
 		.name = "tps65217-pmic",
 	},

drivers/mfd/tps6586x.c

@@ -103,7 +103,7 @@ static struct resource tps6586x_rtc_resources[] = {
 	},
 };
 
-static struct mfd_cell tps6586x_cell[] = {
+static const struct mfd_cell tps6586x_cell[] = {
 	{
 		.name = "tps6586x-gpio",
 	},
@@ -124,6 +124,7 @@ struct tps6586x {
 	struct device		*dev;
 	struct i2c_client	*client;
 	struct regmap		*regmap;
+	int			version;
 
 	int			irq;
 	struct irq_chip		irq_chip;
@@ -208,6 +209,14 @@ int tps6586x_irq_get_virq(struct device *dev, int irq)
 }
 EXPORT_SYMBOL_GPL(tps6586x_irq_get_virq);
 
+int tps6586x_get_version(struct device *dev)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+
+	return tps6586x->version;
+}
+EXPORT_SYMBOL_GPL(tps6586x_get_version);
+
 static int __remove_subdev(struct device *dev, void *unused)
 {
 	platform_device_unregister(to_platform_device(dev));
@@ -472,12 +481,38 @@ static void tps6586x_power_off(void)
 	tps6586x_set_bits(tps6586x_dev, TPS6586X_SUPPLYENE, SLEEP_MODE_BIT);
 }
 
+static void tps6586x_print_version(struct i2c_client *client, int version)
+{
+	const char *name;
+
+	switch (version) {
+	case TPS658621A:
+		name = "TPS658621A";
+		break;
+	case TPS658621CD:
+		name = "TPS658621C/D";
+		break;
+	case TPS658623:
+		name = "TPS658623";
+		break;
+	case TPS658643:
+		name = "TPS658643";
+		break;
+	default:
+		name = "TPS6586X";
+		break;
+	}
+
+	dev_info(&client->dev, "Found %s, VERSIONCRC is %02x\n", name, version);
+}
+
 static int tps6586x_i2c_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct tps6586x_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct tps6586x *tps6586x;
 	int ret;
+	int version;
 
 	if (!pdata && client->dev.of_node)
 		pdata = tps6586x_parse_dt(client);
@@ -487,19 +522,18 @@ static int tps6586x_i2c_probe(struct i2c_client *client,
 		return -ENOTSUPP;
 	}
 
-	ret = i2c_smbus_read_byte_data(client, TPS6586X_VERSIONCRC);
-	if (ret < 0) {
-		dev_err(&client->dev, "Chip ID read failed: %d\n", ret);
+	version = i2c_smbus_read_byte_data(client, TPS6586X_VERSIONCRC);
+	if (version < 0) {
+		dev_err(&client->dev, "Chip ID read failed: %d\n", version);
 		return -EIO;
 	}
 
-	dev_info(&client->dev, "VERSIONCRC is %02x\n", ret);
-
 	tps6586x = devm_kzalloc(&client->dev, sizeof(*tps6586x), GFP_KERNEL);
-	if (tps6586x == NULL) {
-		dev_err(&client->dev, "memory for tps6586x alloc failed\n");
+	if (!tps6586x)
 		return -ENOMEM;
-	}
+
+	tps6586x->version = version;
+	tps6586x_print_version(client, tps6586x->version);
 
 	tps6586x->client = client;
 	tps6586x->dev = &client->dev;

drivers/mfd/tps65910.c

@@ -36,7 +36,7 @@ static struct resource rtc_resources[] = {
 	}
 };
 
-static struct mfd_cell tps65910s[] = {
+static const struct mfd_cell tps65910s[] = {
 	{
 		.name = "tps65910-gpio",
 	},

drivers/mfd/tps65912-core.c

@@ -21,7 +21,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps65912.h>
 
-static struct mfd_cell tps65912s[] = {
+static const struct mfd_cell tps65912s[] = {
 	{
 		.name = "tps65912-pmic",
 	},

drivers/mfd/tps80031.c

@@ -44,7 +44,7 @@ static struct resource tps80031_rtc_resources[] = {
 };
 
 /* TPS80031 sub mfd devices */
-static struct mfd_cell tps80031_cell[] = {
+static const struct mfd_cell tps80031_cell[] = {
 	{
 		.name = "tps80031-pmic",
 	},

drivers/mfd/twl-core.c

@@ -837,62 +837,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
 			usb3v1[0].dev_name = dev_name(child);
 		}
 	}
-	if (IS_ENABLED(CONFIG_TWL6030_USB) && pdata->usb &&
-	    twl_class_is_6030()) {
-
-		static struct regulator_consumer_supply usb3v3;
-		int regulator;
-
-		if (IS_ENABLED(CONFIG_REGULATOR_TWL4030)) {
-			/* this is a template that gets copied */
-			struct regulator_init_data usb_fixed = {
-				.constraints.valid_modes_mask =
-					REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-				.constraints.valid_ops_mask =
-					REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-			};
-
-			if (features & TWL6032_SUBCLASS) {
-				usb3v3.supply =	"ldousb";
-				regulator = TWL6032_REG_LDOUSB;
-			} else {
-				usb3v3.supply = "vusb";
-				regulator = TWL6030_REG_VUSB;
-			}
-			child = add_regulator_linked(regulator, &usb_fixed,
-							&usb3v3, 1,
-							features);
-			if (IS_ERR(child))
-				return PTR_ERR(child);
-		}
-
-		pdata->usb->features = features;
-
-		child = add_child(TWL_MODULE_USB, "twl6030_usb",
-			pdata->usb, sizeof(*pdata->usb), true,
-			/* irq1 = VBUS_PRES, irq0 = USB ID */
-			irq_base + USBOTG_INTR_OFFSET,
-			irq_base + USB_PRES_INTR_OFFSET);
-
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-		/* we need to connect regulators to this transceiver */
-		if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && child)
-			usb3v3.dev_name = dev_name(child);
-	} else if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) &&
-		   twl_class_is_6030()) {
-		if (features & TWL6032_SUBCLASS)
-			child = add_regulator(TWL6032_REG_LDOUSB,
-						pdata->ldousb, features);
-		else
-			child = add_regulator(TWL6030_REG_VUSB,
-						pdata->vusb, features);
-
-			if (IS_ERR(child))
-					return PTR_ERR(child);
-	}
 
 	if (IS_ENABLED(CONFIG_TWL4030_WATCHDOG) && twl_class_is_4030()) {
 		child = add_child(TWL_MODULE_PM_RECEIVER, "twl4030_wdt", NULL,
@@ -1006,148 +950,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
 			return PTR_ERR(child);
 	}
 
-	/* twl6030 regulators */
-	if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() &&
-			!(features & TWL6032_SUBCLASS)) {
-		child = add_regulator(TWL6030_REG_VDD1, pdata->vdd1,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VDD2, pdata->vdd2,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VDD3, pdata->vdd3,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_V1V8, pdata->v1v8,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_V2V1, pdata->v2v1,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VMMC, pdata->vmmc,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VPP, pdata->vpp,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VUSIM, pdata->vusim,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VCXIO, pdata->vcxio,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VDAC, pdata->vdac,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VAUX1_6030, pdata->vaux1,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VAUX2_6030, pdata->vaux2,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_VAUX3_6030, pdata->vaux3,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6030_REG_CLK32KG, pdata->clk32kg,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-	}
-
-	/* 6030 and 6025 share this regulator */
-	if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030()) {
-		child = add_regulator(TWL6030_REG_VANA, pdata->vana,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-	}
-
-	/* twl6032 regulators */
-	if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() &&
-			(features & TWL6032_SUBCLASS)) {
-		child = add_regulator(TWL6032_REG_LDO5, pdata->ldo5,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_LDO1, pdata->ldo1,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_LDO7, pdata->ldo7,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_LDO6, pdata->ldo6,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_LDOLN, pdata->ldoln,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_LDO2, pdata->ldo2,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_LDO4, pdata->ldo4,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_LDO3, pdata->ldo3,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_SMPS3, pdata->smps3,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_SMPS4, pdata->smps4,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-		child = add_regulator(TWL6032_REG_VIO, pdata->vio6025,
-					features);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
-	}
-
 	if (IS_ENABLED(CONFIG_CHARGER_TWL4030) && pdata->bci &&
 			!(features & (TPS_SUBSET | TWL5031))) {
 		child = add_child(TWL_MODULE_MAIN_CHARGE, "twl4030_bci",
@@ -1269,6 +1071,11 @@ static int twl_remove(struct i2c_client *client)
 	return 0;
 }
 
+static struct of_dev_auxdata twl_auxdata_lookup[] = {
+	OF_DEV_AUXDATA("ti,twl4030-gpio", 0, "twl4030-gpio", NULL),
+	{ /* sentinel */ },
+};
+
 /* NOTE: This driver only handles a single twl4030/tps659x0 chip */
 static int
 twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
@@ -1407,10 +1214,14 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
 	}
 
-	if (node)
-		status = of_platform_populate(node, NULL, NULL, &client->dev);
-	else
+	if (node) {
+		if (pdata)
+			twl_auxdata_lookup[0].platform_data = pdata->gpio;
+		status = of_platform_populate(node, NULL, twl_auxdata_lookup,
+					      &client->dev);
+	} else {
 		status = add_children(pdata, irq_base, id->driver_data);
+	}
 
 fail:
 	if (status < 0)

drivers/mfd/twl6030-irq.c

@@ -176,8 +176,9 @@ static irqreturn_t twl6030_irq_thread(int irq, void *data)
 	int i, ret;
 	union {
 		u8 bytes[4];
-		u32 int_sts;
+		__le32 int_sts;
 	} sts;
+	u32 int_sts; /* sts.int_sts converted to CPU endianness */
 	struct twl6030_irq *pdata = data;
 
 	/* read INT_STS_A, B and C in one shot using a burst read */
@@ -196,8 +197,9 @@ static irqreturn_t twl6030_irq_thread(int irq, void *data)
 	if (sts.bytes[2] & 0x10)
 		sts.bytes[2] |= 0x08;
 
-	for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++)
-		if (sts.int_sts & 0x1) {
+	int_sts = le32_to_cpu(sts.int_sts);
+	for (i = 0; int_sts; int_sts >>= 1, i++)
+		if (int_sts & 0x1) {
 			int module_irq =
 				irq_find_mapping(pdata->irq_domain,
 						 pdata->irq_mapping_tbl[i]);

drivers/mfd/twl6040.c

@@ -86,7 +86,7 @@ static struct reg_default twl6040_defaults[] = {
 	{ 0x2E, 0x00 }, /* REG_STATUS	(ro) */
 };
 
-struct reg_default twl6040_patch[] = {
+static struct reg_default twl6040_patch[] = {
 	/* Select I2C bus access to dual access registers */
 	{ TWL6040_REG_ACCCTL, 0x09 },
 };

drivers/mfd/viperboard.c

@@ -37,7 +37,7 @@ static const struct usb_device_id vprbrd_table[] = {
 
 MODULE_DEVICE_TABLE(usb, vprbrd_table);
 
-static struct mfd_cell vprbrd_devs[] = {
+static const struct mfd_cell vprbrd_devs[] = {
 	{
 		.name = "viperboard-gpio",
 	},

drivers/mfd/vx855.c

@@ -60,7 +60,7 @@ static struct resource vx855_gpio_resources[] = {
 	},
 };
 
-static struct mfd_cell vx855_cells[] = {
+static const struct mfd_cell vx855_cells[] = {
 	{
 		.name = "vx855_gpio",
 		.num_resources = ARRAY_SIZE(vx855_gpio_resources),
@@ -118,7 +118,7 @@ static void vx855_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(vx855_pci_tbl) = {
+static const struct pci_device_id vx855_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) },
 	{ 0, }
 };

drivers/mfd/wm5110-tables.c

@@ -224,6 +224,31 @@ static const struct reg_default wm5110_revb_patch[] = {
 	{ 0x80, 0x0 },
 };
 
+static const struct reg_default wm5110_revd_patch[] = {
+	{ 0x80, 0x3 },
+	{ 0x80, 0x3 },
+	{ 0x393, 0x27 },
+	{ 0x394, 0x27 },
+	{ 0x395, 0x27 },
+	{ 0x396, 0x27 },
+	{ 0x397, 0x27 },
+	{ 0x398, 0x26 },
+	{ 0x221, 0x90 },
+	{ 0x211, 0x8 },
+	{ 0x36c, 0x1fb },
+	{ 0x26e, 0x64 },
+	{ 0x26f, 0xea },
+	{ 0x270, 0x1f16 },
+	{ 0x51b, 0x1 },
+	{ 0x55b, 0x1 },
+	{ 0x59b, 0x1 },
+	{ 0x4f0, 0x633 },
+	{ 0x441, 0xc059 },
+	{ 0x209, 0x27 },
+	{ 0x80, 0x0 },
+	{ 0x80, 0x0 },
+};
+
 /* We use a function so we can use ARRAY_SIZE() */
 int wm5110_patch(struct arizona *arizona)
 {
@@ -236,7 +261,10 @@ int wm5110_patch(struct arizona *arizona)
 		return regmap_register_patch(arizona->regmap,
 					     wm5110_revb_patch,
 					     ARRAY_SIZE(wm5110_revb_patch));
-
+	case 3:
+		return regmap_register_patch(arizona->regmap,
+					     wm5110_revd_patch,
+					     ARRAY_SIZE(wm5110_revd_patch));
 	default:
 		return 0;
 	}
@@ -505,7 +533,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x000001AA, 0x0004 },    /* R426   - FLL2 GPIO Clock */
 	{ 0x00000200, 0x0006 },    /* R512   - Mic Charge Pump 1 */
 	{ 0x00000210, 0x0184 },    /* R528   - LDO1 Control 1 */
-	{ 0x00000213, 0x0344 },    /* R531   - LDO2 Control 1 */
+	{ 0x00000213, 0x03E4 },    /* R531   - LDO2 Control 1 */
 	{ 0x00000218, 0x01A6 },    /* R536   - Mic Bias Ctrl 1 */
 	{ 0x00000219, 0x01A6 },    /* R537   - Mic Bias Ctrl 2 */
 	{ 0x0000021A, 0x01A6 },    /* R538   - Mic Bias Ctrl 3 */

drivers/mfd/wm831x-core.c

@@ -1011,7 +1011,7 @@ static struct resource wm831x_wdt_resources[] = {
 	},
 };
 
-static struct mfd_cell wm8310_devs[] = {
+static const struct mfd_cell wm8310_devs[] = {
 	{
 		.name = "wm831x-backup",
 	},
@@ -1165,7 +1165,7 @@ static struct mfd_cell wm8310_devs[] = {
 	},
 };
 
-static struct mfd_cell wm8311_devs[] = {
+static const struct mfd_cell wm8311_devs[] = {
 	{
 		.name = "wm831x-backup",
 	},
@@ -1295,7 +1295,7 @@ static struct mfd_cell wm8311_devs[] = {
 	},
 };
 
-static struct mfd_cell wm8312_devs[] = {
+static const struct mfd_cell wm8312_devs[] = {
 	{
 		.name = "wm831x-backup",
 	},
@@ -1449,7 +1449,7 @@ static struct mfd_cell wm8312_devs[] = {
 	},
 };
 
-static struct mfd_cell wm8320_devs[] = {
+static const struct mfd_cell wm8320_devs[] = {
 	{
 		.name = "wm831x-backup",
 	},
@@ -1578,7 +1578,7 @@ static struct mfd_cell wm8320_devs[] = {
 	},
 };
 
-static struct mfd_cell touch_devs[] = {
+static const struct mfd_cell touch_devs[] = {
 	{
 		.name = "wm831x-touch",
 		.num_resources = ARRAY_SIZE(wm831x_touch_resources),
@@ -1586,7 +1586,7 @@ static struct mfd_cell touch_devs[] = {
 	},
 };
 
-static struct mfd_cell rtc_devs[] = {
+static const struct mfd_cell rtc_devs[] = {
 	{
 		.name = "wm831x-rtc",
 		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
@@ -1594,7 +1594,7 @@ static struct mfd_cell rtc_devs[] = {
 	},
 };
 
-static struct mfd_cell backlight_devs[] = {
+static const struct mfd_cell backlight_devs[] = {
 	{
 		.name = "wm831x-backlight",
 	},

drivers/mfd/wm831x-i2c.c

@@ -64,11 +64,13 @@ static int wm831x_i2c_suspend(struct device *dev)
 	return wm831x_device_suspend(wm831x);
 }
 
-static void wm831x_i2c_shutdown(struct i2c_client *i2c)
+static int wm831x_i2c_poweroff(struct device *dev)
 {
-	struct wm831x *wm831x = i2c_get_clientdata(i2c);
+	struct wm831x *wm831x = dev_get_drvdata(dev);
 
 	wm831x_device_shutdown(wm831x);
+
+	return 0;
 }
 
 static const struct i2c_device_id wm831x_i2c_id[] = {
@@ -85,6 +87,7 @@ MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
 
 static const struct dev_pm_ops wm831x_pm_ops = {
 	.suspend = wm831x_i2c_suspend,
+	.poweroff = wm831x_i2c_poweroff,
 };
 
 static struct i2c_driver wm831x_i2c_driver = {
@@ -95,7 +98,6 @@ static struct i2c_driver wm831x_i2c_driver = {
 	},
 	.probe = wm831x_i2c_probe,
 	.remove = wm831x_i2c_remove,
-	.shutdown = wm831x_i2c_shutdown,
 	.id_table = wm831x_i2c_id,
 };
 

drivers/mfd/wm831x-spi.c

@@ -66,16 +66,19 @@ static int wm831x_spi_suspend(struct device *dev)
 	return wm831x_device_suspend(wm831x);
 }
 
-static void wm831x_spi_shutdown(struct spi_device *spi)
+static int wm831x_spi_poweroff(struct device *dev)
 {
-	struct wm831x *wm831x = spi_get_drvdata(spi);
+	struct wm831x *wm831x = dev_get_drvdata(dev);
 
 	wm831x_device_shutdown(wm831x);
+
+	return 0;
 }
 
 static const struct dev_pm_ops wm831x_spi_pm = {
 	.freeze = wm831x_spi_suspend,
 	.suspend = wm831x_spi_suspend,
+	.poweroff = wm831x_spi_poweroff,
 };
 
 static const struct spi_device_id wm831x_spi_ids[] = {
@@ -99,7 +102,6 @@ static struct spi_driver wm831x_spi_driver = {
 	.id_table	= wm831x_spi_ids,
 	.probe		= wm831x_spi_probe,
 	.remove		= wm831x_spi_remove,
-	.shutdown	= wm831x_spi_shutdown,
 };
 
 static int __init wm831x_spi_init(void)

drivers/mfd/wm8994-core.c

@@ -33,7 +33,7 @@
 
 #include "wm8994.h"
 
-static struct mfd_cell wm8994_regulator_devs[] = {
+static const struct mfd_cell wm8994_regulator_devs[] = {
 	{
 		.name = "wm8994-ldo",
 		.id = 1,
@@ -62,7 +62,7 @@ static struct resource wm8994_gpio_resources[] = {
 	},
 };
 
-static struct mfd_cell wm8994_devs[] = {
+static const struct mfd_cell wm8994_devs[] = {
 	{
 		.name = "wm8994-codec",
 		.num_resources = ARRAY_SIZE(wm8994_codec_resources),

drivers/pinctrl/pinctrl-abx500.c

@@ -24,7 +24,6 @@
 #include <linux/bitops.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500/ab8500-gpio.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinmux.h>
@@ -1218,21 +1217,15 @@ static const struct of_device_id abx500_gpio_match[] = {
 
 static int abx500_gpio_probe(struct platform_device *pdev)
 {
-	struct ab8500_platform_data *abx500_pdata =
-				dev_get_platdata(pdev->dev.parent);
-	struct abx500_gpio_platform_data *pdata = NULL;
 	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
 	struct abx500_pinctrl *pct;
-	const struct platform_device_id *platid = platform_get_device_id(pdev);
 	unsigned int id = -1;
 	int ret, err;
 	int i;
 
-	if (abx500_pdata)
-		pdata = abx500_pdata->gpio;
-
-	if (!(pdata || np)) {
-		dev_err(&pdev->dev, "gpio dt and platform data missing\n");
+	if (!np) {
+		dev_err(&pdev->dev, "gpio dt node missing\n");
 		return -ENODEV;
 	}
 
@@ -1248,17 +1241,14 @@ static int abx500_gpio_probe(struct platform_device *pdev)
 	pct->parent = dev_get_drvdata(pdev->dev.parent);
 	pct->chip = abx500gpio_chip;
 	pct->chip.dev = &pdev->dev;
-	pct->chip.base = (np) ? -1 : pdata->gpio_base;
-
-	if (platid)
-		id = platid->driver_data;
-	else if (np) {
-		const struct of_device_id *match;
+	pct->chip.base = -1; /* Dynamic allocation */
 
-		match = of_match_device(abx500_gpio_match, &pdev->dev);
-		if (match)
-			id = (unsigned long)match->data;
+	match = of_match_device(abx500_gpio_match, &pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "gpio dt not matching\n");
+		return -ENODEV;
 	}
+	id = (unsigned long)match->data;
 
 	/* Poke in other ASIC variants here */
 	switch (id) {
@@ -1349,14 +1339,6 @@ static int abx500_gpio_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct platform_device_id abx500_pinctrl_id[] = {
-	{ "pinctrl-ab8500", PINCTRL_AB8500 },
-	{ "pinctrl-ab8540", PINCTRL_AB8540 },
-	{ "pinctrl-ab9540", PINCTRL_AB9540 },
-	{ "pinctrl-ab8505", PINCTRL_AB8505 },
-	{ },
-};
-
 static struct platform_driver abx500_gpio_driver = {
 	.driver = {
 		.name = "abx500-gpio",
@@ -1365,7 +1347,6 @@ static struct platform_driver abx500_gpio_driver = {
 	},
 	.probe = abx500_gpio_probe,
 	.remove = abx500_gpio_remove,
-	.id_table = abx500_pinctrl_id,
 };
 
 static int __init abx500_gpio_init(void)

drivers/pinctrl/pinctrl-abx500.h

@@ -15,6 +15,18 @@ enum abx500_pin_func {
 	ABX500_ALT_C,
 };
 
+enum abx500_gpio_pull_updown {
+	ABX500_GPIO_PULL_DOWN = 0x0,
+	ABX500_GPIO_PULL_NONE = 0x1,
+	ABX500_GPIO_PULL_UP = 0x3,
+};
+
+enum abx500_gpio_vinsel {
+	ABX500_GPIO_VINSEL_VBAT = 0x0,
+	ABX500_GPIO_VINSEL_VIN_1V8 = 0x1,
+	ABX500_GPIO_VINSEL_VDD_BIF = 0x2,
+};
+
 /**
  * struct abx500_function - ABx500 pinctrl mux function
  * @name: The name of the function, exported to pinctrl core.

drivers/pwm/Kconfig

@@ -90,6 +90,16 @@ config PWM_JZ4740
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-jz4740.
 
+config PWM_LP3943
+	tristate "TI/National Semiconductor LP3943 PWM support"
+	depends on MFD_LP3943
+	help
+	  Generic PWM framework driver for LP3943 which supports two PWM
+	  channels.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-lp3943.
+
 config PWM_LPC32XX
 	tristate "LPC32XX PWM support"
 	depends on ARCH_LPC32XX

drivers/pwm/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
 obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
+obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
 obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 obj-$(CONFIG_PWM_PCA9685)	+= pwm-pca9685.o

drivers/pwm/pwm-lp3943.c

@@ -0,0 +1,314 @@
+/*
+ * TI/National Semiconductor LP3943 PWM driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define LP3943_MAX_DUTY			255
+#define LP3943_MIN_PERIOD		6250
+#define LP3943_MAX_PERIOD		1600000
+
+struct lp3943_pwm {
+	struct pwm_chip chip;
+	struct lp3943 *lp3943;
+	struct lp3943_platform_data *pdata;
+};
+
+static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip)
+{
+	return container_of(_chip, struct lp3943_pwm, chip);
+}
+
+static struct lp3943_pwm_map *
+lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm)
+{
+	struct lp3943_platform_data *pdata = lp3943_pwm->pdata;
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	struct lp3943_pwm_map *pwm_map;
+	int i, offset;
+
+	pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL);
+	if (!pwm_map)
+		return ERR_PTR(-ENOMEM);
+
+	pwm_map->output = pdata->pwms[hwpwm]->output;
+	pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		offset = pwm_map->output[i];
+
+		/* Return an error if the pin is already assigned */
+		if (test_and_set_bit(offset, &lp3943->pin_used))
+			return ERR_PTR(-EBUSY);
+	}
+
+	return pwm_map;
+}
+
+static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map;
+
+	pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm);
+	if (IS_ERR(pwm_map))
+		return PTR_ERR(pwm_map);
+
+	return pwm_set_chip_data(pwm, pwm_map);
+}
+
+static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm,
+				struct lp3943_pwm_map *pwm_map)
+{
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	int i, offset;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		offset = pwm_map->output[i];
+		clear_bit(offset, &lp3943->pin_used);
+	}
+
+	kfree(pwm_map);
+}
+
+static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+	lp3943_pwm_free_map(lp3943_pwm, pwm_map);
+}
+
+static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	u8 val, reg_duty, reg_prescale;
+	int err;
+
+	/*
+	 * How to configure the LP3943 PWMs
+	 *
+	 * 1) Period = 6250 ~ 1600000
+	 * 2) Prescale = period / 6250 -1
+	 * 3) Duty = input duty
+	 *
+	 * Prescale and duty are register values
+	 */
+
+	if (pwm->hwpwm == 0) {
+		reg_prescale = LP3943_REG_PRESCALE0;
+		reg_duty     = LP3943_REG_PWM0;
+	} else {
+		reg_prescale = LP3943_REG_PRESCALE1;
+		reg_duty     = LP3943_REG_PWM1;
+	}
+
+	period_ns = clamp(period_ns, LP3943_MIN_PERIOD, LP3943_MAX_PERIOD);
+	val       = (u8)(period_ns / LP3943_MIN_PERIOD - 1);
+
+	err = lp3943_write_byte(lp3943, reg_prescale, val);
+	if (err)
+		return err;
+
+	val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns);
+
+	return lp3943_write_byte(lp3943, reg_duty, val);
+}
+
+static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm,
+			       struct lp3943_pwm_map *pwm_map,
+			       u8 val)
+{
+	struct lp3943 *lp3943 = lp3943_pwm->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+	int i, index, err;
+
+	for (i = 0; i < pwm_map->num_outputs; i++) {
+		index = pwm_map->output[i];
+		err = lp3943_update_bits(lp3943, mux[index].reg,
+					 mux[index].mask,
+					 val << mux[index].shift);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+	u8 val;
+
+	if (pwm->hwpwm == 0)
+		val = LP3943_DIM_PWM0;
+	else
+		val = LP3943_DIM_PWM1;
+
+	/*
+	 * Each PWM generator is set to control any of outputs of LP3943.
+	 * To enable/disable the PWM, these output pins should be configured.
+	 */
+
+	return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val);
+}
+
+static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
+	struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
+
+	/*
+	 * LP3943 outputs are open-drain, so the pin should be configured
+	 * when the PWM is disabled.
+	 */
+
+	lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH);
+}
+
+static const struct pwm_ops lp3943_pwm_ops = {
+	.request	= lp3943_pwm_request,
+	.free		= lp3943_pwm_free,
+	.config		= lp3943_pwm_config,
+	.enable		= lp3943_pwm_enable,
+	.disable	= lp3943_pwm_disable,
+	.owner		= THIS_MODULE,
+};
+
+static int lp3943_pwm_parse_dt(struct device *dev,
+			       struct lp3943_pwm *lp3943_pwm)
+{
+	static const char * const name[] = { "ti,pwm0", "ti,pwm1", };
+	struct device_node *node = dev->of_node;
+	struct lp3943_platform_data *pdata;
+	struct lp3943_pwm_map *pwm_map;
+	enum lp3943_pwm_output *output;
+	int i, err, proplen, count = 0;
+	u32 num_outputs;
+
+	if (!node)
+		return -EINVAL;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	/*
+	 * Read the output map configuration from the device tree.
+	 * Each of the two PWM generators can drive zero or more outputs.
+	 */
+
+	for (i = 0; i < LP3943_NUM_PWMS; i++) {
+		if (!of_get_property(node, name[i], &proplen))
+			continue;
+
+		num_outputs = proplen / sizeof(u32);
+		if (num_outputs == 0)
+			continue;
+
+		output = devm_kzalloc(dev, sizeof(*output) * num_outputs,
+				      GFP_KERNEL);
+		if (!output)
+			return -ENOMEM;
+
+		err = of_property_read_u32_array(node, name[i], output,
+						 num_outputs);
+		if (err)
+			return err;
+
+		pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL);
+		if (!pwm_map)
+			return -ENOMEM;
+
+		pwm_map->output = output;
+		pwm_map->num_outputs = num_outputs;
+		pdata->pwms[i] = pwm_map;
+
+		count++;
+	}
+
+	if (count == 0)
+		return -ENODATA;
+
+	lp3943_pwm->pdata = pdata;
+	return 0;
+}
+
+static int lp3943_pwm_probe(struct platform_device *pdev)
+{
+	struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+	struct lp3943_pwm *lp3943_pwm;
+	int ret;
+
+	lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL);
+	if (!lp3943_pwm)
+		return -ENOMEM;
+
+	lp3943_pwm->pdata = lp3943->pdata;
+	if (!lp3943_pwm->pdata) {
+		if (IS_ENABLED(CONFIG_OF))
+			ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm);
+		else
+			ret = -ENODEV;
+
+		if (ret)
+			return ret;
+	}
+
+	lp3943_pwm->lp3943 = lp3943;
+	lp3943_pwm->chip.dev = &pdev->dev;
+	lp3943_pwm->chip.ops = &lp3943_pwm_ops;
+	lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
+
+	platform_set_drvdata(pdev, lp3943_pwm);
+
+	return pwmchip_add(&lp3943_pwm->chip);
+}
+
+static int lp3943_pwm_remove(struct platform_device *pdev)
+{
+	struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&lp3943_pwm->chip);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id lp3943_pwm_of_match[] = {
+	{ .compatible = "ti,lp3943-pwm", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match);
+#endif
+
+static struct platform_driver lp3943_pwm_driver = {
+	.probe = lp3943_pwm_probe,
+	.remove = lp3943_pwm_remove,
+	.driver = {
+		.name = "lp3943-pwm",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(lp3943_pwm_of_match),
+	},
+};
+module_platform_driver(lp3943_pwm_driver);
+
+MODULE_DESCRIPTION("LP3943 PWM driver");
+MODULE_ALIAS("platform:lp3943-pwm");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");

drivers/regulator/Kconfig

@@ -343,7 +343,7 @@ config REGULATOR_MC13XXX_CORE
 
 config REGULATOR_MC13783
 	tristate "Freescale MC13783 regulator driver"
-	depends on MFD_MC13783
+	depends on MFD_MC13XXX
 	select REGULATOR_MC13XXX_CORE
 	help
 	  Say y here to support the regulators found on the Freescale MC13783

drivers/regulator/tps6586x-regulator.c

@@ -93,6 +93,8 @@ static const unsigned int tps6586x_ldo4_voltages[] = {
 	2300000, 2325000, 2350000, 2375000, 2400000, 2425000, 2450000, 2475000,
 };
 
+#define tps658623_sm2_voltages tps6586x_ldo4_voltages
+
 static const unsigned int tps6586x_ldo_voltages[] = {
 	1250000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
 };
@@ -104,6 +106,13 @@ static const unsigned int tps6586x_sm2_voltages[] = {
 	4200000, 4250000, 4300000, 4350000, 4400000, 4450000, 4500000, 4550000,
 };
 
+static const unsigned int tps658643_sm2_voltages[] = {
+	1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000,
+	1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000,
+	1425000, 1450000, 1475000, 1500000, 1525000, 1550000, 1575000, 1600000,
+	1625000, 1650000, 1675000, 1700000, 1725000, 1750000, 1775000, 1800000,
+};
+
 static const unsigned int tps6586x_dvm_voltages[] = {
 	 725000,  750000,  775000,  800000,  825000,  850000,  875000,  900000,
 	 925000,  950000,  975000, 1000000, 1025000, 1050000, 1075000, 1100000,
@@ -119,8 +128,8 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 		.ops	= &tps6586x_regulator_ops,			\
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= TPS6586X_ID_##_id,				\
-		.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages),	\
-		.volt_table = tps6586x_##vdata##_voltages,		\
+		.n_voltages = ARRAY_SIZE(vdata##_voltages),		\
+		.volt_table = vdata##_voltages,				\
 		.owner	= THIS_MODULE,					\
 		.enable_reg = TPS6586X_SUPPLY##ereg0,			\
 		.enable_mask = 1 << (ebit0),				\
@@ -162,27 +171,47 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 
 static struct tps6586x_regulator tps6586x_regulator[] = {
 	TPS6586X_SYS_REGULATOR(),
-	TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
-	TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
-	TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
-	TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
-	TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
-	TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
-	TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
-	TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
-	TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
-	TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
-
-	TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
+	TPS6586X_LDO(LDO_0, "vinldo01", tps6586x_ldo0, SUPPLYV1, 5, 3, ENC, 0,
+					END, 0),
+	TPS6586X_LDO(LDO_3, "vinldo23", tps6586x_ldo, SUPPLYV4, 0, 3, ENC, 2,
+					END, 2),
+	TPS6586X_LDO(LDO_5, "REG-SYS", tps6586x_ldo, SUPPLYV6, 0, 3, ENE, 6,
+					ENE, 6),
+	TPS6586X_LDO(LDO_6, "vinldo678", tps6586x_ldo, SUPPLYV3, 0, 3, ENC, 4,
+					END, 4),
+	TPS6586X_LDO(LDO_7, "vinldo678", tps6586x_ldo, SUPPLYV3, 3, 3, ENC, 5,
+					END, 5),
+	TPS6586X_LDO(LDO_8, "vinldo678", tps6586x_ldo, SUPPLYV2, 5, 3, ENC, 6,
+					END, 6),
+	TPS6586X_LDO(LDO_9, "vinldo9", tps6586x_ldo, SUPPLYV6, 3, 3, ENE, 7,
+					ENE, 7),
+	TPS6586X_LDO(LDO_RTC, "REG-SYS", tps6586x_ldo, SUPPLYV4, 3, 3, V4, 7,
+					V4, 7),
+	TPS6586X_LDO(LDO_1, "vinldo01", tps6586x_dvm, SUPPLYV1, 0, 5, ENC, 1,
+					END, 1),
+	TPS6586X_LDO(SM_2, "vin-sm2", tps6586x_sm2, SUPPLYV2, 0, 5, ENC, 7,
+					END, 7),
+
+	TPS6586X_DVM(LDO_2, "vinldo23", tps6586x_dvm, LDO2BV1, 0, 5, ENA, 3,
 					ENB, 3, TPS6586X_VCC2, BIT(6)),
-	TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
+	TPS6586X_DVM(LDO_4, "vinldo4", tps6586x_ldo4, LDO4V1, 0, 5, ENC, 3,
 					END, 3, TPS6586X_VCC1, BIT(6)),
-	TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1,
+	TPS6586X_DVM(SM_0, "vin-sm0", tps6586x_dvm, SM0V1, 0, 5, ENA, 1,
 					ENB, 1, TPS6586X_VCC1, BIT(2)),
-	TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0,
+	TPS6586X_DVM(SM_1, "vin-sm1", tps6586x_dvm, SM1V1, 0, 5, ENA, 0,
 					ENB, 0, TPS6586X_VCC1, BIT(0)),
 };
 
+static struct tps6586x_regulator tps658623_regulator[] = {
+	TPS6586X_LDO(SM_2, "vin-sm2", tps658623_sm2, SUPPLYV2, 0, 5, ENC, 7,
+					END, 7),
+};
+
+static struct tps6586x_regulator tps658643_regulator[] = {
+	TPS6586X_LDO(SM_2, "vin-sm2", tps658643_sm2, SUPPLYV2, 0, 5, ENC, 7,
+					END, 7),
+};
+
 /*
  * TPS6586X has 2 enable bits that are OR'ed to determine the actual
  * regulator state. Clearing one of this bits allows switching
@@ -254,11 +283,33 @@ static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev,
 			setting->slew_rate & TPS6586X_SLEW_RATE_MASK);
 }
 
-static inline struct tps6586x_regulator *find_regulator_info(int id)
+static struct tps6586x_regulator *find_regulator_info(int id, int version)
 {
 	struct tps6586x_regulator *ri;
+	struct tps6586x_regulator *table = NULL;
+	int num;
 	int i;
 
+	switch (version) {
+	case TPS658623:
+		table = tps658623_regulator;
+		num = ARRAY_SIZE(tps658623_regulator);
+		break;
+	case TPS658643:
+		table = tps658643_regulator;
+		num = ARRAY_SIZE(tps658643_regulator);
+		break;
+	}
+
+	/* Search version specific table first */
+	if (table) {
+		for (i = 0; i < num; i++) {
+			ri = &table[i];
+			if (ri->desc.id == id)
+				return ri;
+		}
+	}
+
 	for (i = 0; i < ARRAY_SIZE(tps6586x_regulator); i++) {
 		ri = &tps6586x_regulator[i];
 		if (ri->desc.id == id)
@@ -351,6 +402,7 @@ static int tps6586x_regulator_probe(struct platform_device *pdev)
 	struct regulator_init_data *reg_data;
 	struct tps6586x_platform_data *pdata;
 	struct of_regulator_match *tps6586x_reg_matches = NULL;
+	int version;
 	int id;
 	int err;
 
@@ -373,10 +425,13 @@ static int tps6586x_regulator_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	version = tps6586x_get_version(pdev->dev.parent);
+
 	for (id = 0; id < TPS6586X_ID_MAX_REGULATOR; ++id) {
 		reg_data = pdata->reg_init_data[id];
 
-		ri = find_regulator_info(id);
+		ri = find_regulator_info(id, version);
+
 		if (!ri) {
 			dev_err(&pdev->dev, "invalid regulator ID specified\n");
 			return -EINVAL;

include/linux/mfd/abx500/ab8500-gpio.h

@@ -1,33 +0,0 @@
-/*
- * Copyright ST-Ericsson 2010.
- *
- * Author: Bibek Basu <bibek.basu@stericsson.com>
- * Licensed under GPLv2.
- */
-
-#ifndef _AB8500_GPIO_H
-#define _AB8500_GPIO_H
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- * Array sizes are large enough to contain all AB8500 and AB9540 GPIO
- * registers.
- */
-
-struct abx500_gpio_platform_data {
-	int gpio_base;
-};
-
-enum abx500_gpio_pull_updown {
-	ABX500_GPIO_PULL_DOWN = 0x0,
-	ABX500_GPIO_PULL_NONE = 0x1,
-	ABX500_GPIO_PULL_UP = 0x3,
-};
-
-enum abx500_gpio_vinsel {
-	ABX500_GPIO_VINSEL_VBAT = 0x0,
-	ABX500_GPIO_VINSEL_VIN_1V8 = 0x1,
-	ABX500_GPIO_VINSEL_VDD_BIF = 0x2,
-};
-
-#endif /* _AB8500_GPIO_H */

include/linux/mfd/abx500/ab8500.h

@@ -368,7 +368,6 @@ struct ab8500 {
 };
 
 struct ab8500_regulator_platform_data;
-struct ab8500_gpio_platform_data;
 struct ab8500_codec_platform_data;
 struct ab8500_sysctrl_platform_data;
 
@@ -382,7 +381,6 @@ struct ab8500_platform_data {
 	int irq_base;
 	void (*init) (struct ab8500 *);
 	struct ab8500_regulator_platform_data *regulator;
-	struct abx500_gpio_platform_data *gpio;
 	struct ab8500_codec_platform_data *codec;
 	struct ab8500_sysctrl_platform_data *sysctrl;
 };

include/linux/mfd/lp3943.h

@@ -0,0 +1,114 @@
+/*
+ * TI/National Semiconductor LP3943 Device
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MFD_LP3943_H__
+#define __MFD_LP3943_H__
+
+#include <linux/gpio.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+/* Registers */
+#define LP3943_REG_GPIO_A		0x00
+#define LP3943_REG_GPIO_B		0x01
+#define LP3943_REG_PRESCALE0		0x02
+#define LP3943_REG_PWM0			0x03
+#define LP3943_REG_PRESCALE1		0x04
+#define LP3943_REG_PWM1			0x05
+#define LP3943_REG_MUX0			0x06
+#define LP3943_REG_MUX1			0x07
+#define LP3943_REG_MUX2			0x08
+#define LP3943_REG_MUX3			0x09
+
+/* Bit description for LP3943_REG_MUX0 ~ 3 */
+#define LP3943_GPIO_IN			0x00
+#define LP3943_GPIO_OUT_HIGH		0x00
+#define LP3943_GPIO_OUT_LOW		0x01
+#define LP3943_DIM_PWM0			0x02
+#define LP3943_DIM_PWM1			0x03
+
+#define LP3943_NUM_PWMS			2
+
+enum lp3943_pwm_output {
+	LP3943_PWM_OUT0,
+	LP3943_PWM_OUT1,
+	LP3943_PWM_OUT2,
+	LP3943_PWM_OUT3,
+	LP3943_PWM_OUT4,
+	LP3943_PWM_OUT5,
+	LP3943_PWM_OUT6,
+	LP3943_PWM_OUT7,
+	LP3943_PWM_OUT8,
+	LP3943_PWM_OUT9,
+	LP3943_PWM_OUT10,
+	LP3943_PWM_OUT11,
+	LP3943_PWM_OUT12,
+	LP3943_PWM_OUT13,
+	LP3943_PWM_OUT14,
+	LP3943_PWM_OUT15,
+};
+
+/*
+ * struct lp3943_pwm_map
+ * @output: Output pins which are mapped to each PWM channel
+ * @num_outputs: Number of outputs
+ */
+struct lp3943_pwm_map {
+	enum lp3943_pwm_output *output;
+	int num_outputs;
+};
+
+/*
+ * struct lp3943_platform_data
+ * @pwms: Output channel definitions for PWM channel 0 and 1
+ */
+struct lp3943_platform_data {
+	struct lp3943_pwm_map *pwms[LP3943_NUM_PWMS];
+};
+
+/*
+ * struct lp3943_reg_cfg
+ * @reg: Register address
+ * @mask: Register bit mask to be updated
+ * @shift: Register bit shift
+ */
+struct lp3943_reg_cfg {
+	u8 reg;
+	u8 mask;
+	u8 shift;
+};
+
+/*
+ * struct lp3943
+ * @dev: Parent device pointer
+ * @regmap: Used for I2C communication on accessing registers
+ * @pdata: LP3943 platform specific data
+ * @mux_cfg: Register configuration for pin MUX
+ * @pin_used: Bit mask for output pin used.
+ *	      This bitmask is used for pin assignment management.
+ *	      1 = pin used, 0 = available.
+ *	      Only LSB 16 bits are used, but it is unsigned long type
+ *	      for atomic bitwise operations.
+ */
+struct lp3943 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct lp3943_platform_data *pdata;
+	const struct lp3943_reg_cfg *mux_cfg;
+	unsigned long pin_used;
+};
+
+int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read);
+int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data);
+int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data);
+#endif

include/linux/mfd/max14577-private.h

@@ -0,0 +1,330 @@
+/*
+ * max14577-private.h - Common API for the Maxim 14577 internal sub chip
+ *
+ * Copyright (C) 2013 Samsung Electrnoics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MAX14577_PRIVATE_H__
+#define __MAX14577_PRIVATE_H__
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#define MAX14577_REG_INVALID		(0xff)
+
+/* Slave addr = 0x4A: Interrupt */
+enum max14577_reg {
+	MAX14577_REG_DEVICEID		= 0x00,
+	MAX14577_REG_INT1		= 0x01,
+	MAX14577_REG_INT2		= 0x02,
+	MAX14577_REG_INT3		= 0x03,
+	MAX14577_REG_STATUS1		= 0x04,
+	MAX14577_REG_STATUS2		= 0x05,
+	MAX14577_REG_STATUS3		= 0x06,
+	MAX14577_REG_INTMASK1		= 0x07,
+	MAX14577_REG_INTMASK2		= 0x08,
+	MAX14577_REG_INTMASK3		= 0x09,
+	MAX14577_REG_CDETCTRL1		= 0x0A,
+	MAX14577_REG_RFU		= 0x0B,
+	MAX14577_REG_CONTROL1		= 0x0C,
+	MAX14577_REG_CONTROL2		= 0x0D,
+	MAX14577_REG_CONTROL3		= 0x0E,
+	MAX14577_REG_CHGCTRL1		= 0x0F,
+	MAX14577_REG_CHGCTRL2		= 0x10,
+	MAX14577_REG_CHGCTRL3		= 0x11,
+	MAX14577_REG_CHGCTRL4		= 0x12,
+	MAX14577_REG_CHGCTRL5		= 0x13,
+	MAX14577_REG_CHGCTRL6		= 0x14,
+	MAX14577_REG_CHGCTRL7		= 0x15,
+
+	MAX14577_REG_END,
+};
+
+/* Slave addr = 0x4A: MUIC */
+enum max14577_muic_reg {
+	MAX14577_MUIC_REG_STATUS1	= 0x04,
+	MAX14577_MUIC_REG_STATUS2	= 0x05,
+	MAX14577_MUIC_REG_CONTROL1	= 0x0C,
+	MAX14577_MUIC_REG_CONTROL3	= 0x0E,
+
+	MAX14577_MUIC_REG_END,
+};
+
+enum max14577_muic_charger_type {
+	MAX14577_CHARGER_TYPE_NONE = 0,
+	MAX14577_CHARGER_TYPE_USB,
+	MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT,
+	MAX14577_CHARGER_TYPE_DEDICATED_CHG,
+	MAX14577_CHARGER_TYPE_SPECIAL_500MA,
+	MAX14577_CHARGER_TYPE_SPECIAL_1A,
+	MAX14577_CHARGER_TYPE_RESERVED,
+	MAX14577_CHARGER_TYPE_DEAD_BATTERY = 7,
+};
+
+/* MAX14577 interrupts */
+#define INT1_ADC_MASK			(0x1 << 0)
+#define INT1_ADCLOW_MASK		(0x1 << 1)
+#define INT1_ADCERR_MASK		(0x1 << 2)
+
+#define INT2_CHGTYP_MASK		(0x1 << 0)
+#define INT2_CHGDETRUN_MASK		(0x1 << 1)
+#define INT2_DCDTMR_MASK		(0x1 << 2)
+#define INT2_DBCHG_MASK			(0x1 << 3)
+#define INT2_VBVOLT_MASK		(0x1 << 4)
+
+#define INT3_EOC_MASK			(0x1 << 0)
+#define INT3_CGMBC_MASK			(0x1 << 1)
+#define INT3_OVP_MASK			(0x1 << 2)
+#define INT3_MBCCHGERR_MASK		(0x1 << 3)
+
+/* MAX14577 DEVICE ID register */
+#define DEVID_VENDORID_SHIFT		0
+#define DEVID_DEVICEID_SHIFT		3
+#define DEVID_VENDORID_MASK		(0x07 << DEVID_VENDORID_SHIFT)
+#define DEVID_DEVICEID_MASK		(0x1f << DEVID_DEVICEID_SHIFT)
+
+/* MAX14577 STATUS1 register */
+#define STATUS1_ADC_SHIFT		0
+#define STATUS1_ADCLOW_SHIFT		5
+#define STATUS1_ADCERR_SHIFT		6
+#define STATUS1_ADC_MASK		(0x1f << STATUS1_ADC_SHIFT)
+#define STATUS1_ADCLOW_MASK		(0x1 << STATUS1_ADCLOW_SHIFT)
+#define STATUS1_ADCERR_MASK		(0x1 << STATUS1_ADCERR_SHIFT)
+
+/* MAX14577 STATUS2 register */
+#define STATUS2_CHGTYP_SHIFT		0
+#define STATUS2_CHGDETRUN_SHIFT		3
+#define STATUS2_DCDTMR_SHIFT		4
+#define STATUS2_DBCHG_SHIFT		5
+#define STATUS2_VBVOLT_SHIFT		6
+#define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
+#define STATUS2_CHGDETRUN_MASK		(0x1 << STATUS2_CHGDETRUN_SHIFT)
+#define STATUS2_DCDTMR_MASK		(0x1 << STATUS2_DCDTMR_SHIFT)
+#define STATUS2_DBCHG_MASK		(0x1 << STATUS2_DBCHG_SHIFT)
+#define STATUS2_VBVOLT_MASK		(0x1 << STATUS2_VBVOLT_SHIFT)
+
+/* MAX14577 CONTROL1 register */
+#define COMN1SW_SHIFT			0
+#define COMP2SW_SHIFT			3
+#define MICEN_SHIFT			6
+#define IDBEN_SHIFT			7
+#define COMN1SW_MASK			(0x7 << COMN1SW_SHIFT)
+#define COMP2SW_MASK			(0x7 << COMP2SW_SHIFT)
+#define MICEN_MASK			(0x1 << MICEN_SHIFT)
+#define IDBEN_MASK			(0x1 << IDBEN_SHIFT)
+#define CLEAR_IDBEN_MICEN_MASK		(COMN1SW_MASK | COMP2SW_MASK)
+#define CTRL1_SW_USB			((1 << COMP2SW_SHIFT) \
+						| (1 << COMN1SW_SHIFT))
+#define CTRL1_SW_AUDIO			((2 << COMP2SW_SHIFT) \
+						| (2 << COMN1SW_SHIFT))
+#define CTRL1_SW_UART			((3 << COMP2SW_SHIFT) \
+						| (3 << COMN1SW_SHIFT))
+#define CTRL1_SW_OPEN			((0 << COMP2SW_SHIFT) \
+						| (0 << COMN1SW_SHIFT))
+
+/* MAX14577 CONTROL2 register */
+#define CTRL2_LOWPWR_SHIFT		(0)
+#define CTRL2_ADCEN_SHIFT		(1)
+#define CTRL2_CPEN_SHIFT		(2)
+#define CTRL2_SFOUTASRT_SHIFT		(3)
+#define CTRL2_SFOUTORD_SHIFT		(4)
+#define CTRL2_ACCDET_SHIFT		(5)
+#define CTRL2_USBCPINT_SHIFT		(6)
+#define CTRL2_RCPS_SHIFT		(7)
+#define CTRL2_LOWPWR_MASK		(0x1 << CTRL2_LOWPWR_SHIFT)
+#define CTRL2_ADCEN_MASK		(0x1 << CTRL2_ADCEN_SHIFT)
+#define CTRL2_CPEN_MASK			(0x1 << CTRL2_CPEN_SHIFT)
+#define CTRL2_SFOUTASRT_MASK		(0x1 << CTRL2_SFOUTASRT_SHIFT)
+#define CTRL2_SFOUTORD_MASK		(0x1 << CTRL2_SFOUTORD_SHIFT)
+#define CTRL2_ACCDET_MASK		(0x1 << CTRL2_ACCDET_SHIFT)
+#define CTRL2_USBCPINT_MASK		(0x1 << CTRL2_USBCPINT_SHIFT)
+#define CTRL2_RCPS_MASK			(0x1 << CTR2_RCPS_SHIFT)
+
+#define CTRL2_CPEN1_LOWPWR0 ((1 << CTRL2_CPEN_SHIFT) | \
+				(0 << CTRL2_LOWPWR_SHIFT))
+#define CTRL2_CPEN0_LOWPWR1 ((0 << CTRL2_CPEN_SHIFT) | \
+				(1 << CTRL2_LOWPWR_SHIFT))
+
+/* MAX14577 CONTROL3 register */
+#define CTRL3_JIGSET_SHIFT		0
+#define CTRL3_BOOTSET_SHIFT		2
+#define CTRL3_ADCDBSET_SHIFT		4
+#define CTRL3_JIGSET_MASK		(0x3 << CTRL3_JIGSET_SHIFT)
+#define CTRL3_BOOTSET_MASK		(0x3 << CTRL3_BOOTSET_SHIFT)
+#define CTRL3_ADCDBSET_MASK		(0x3 << CTRL3_ADCDBSET_SHIFT)
+
+/* Slave addr = 0x4A: Charger */
+enum max14577_charger_reg {
+	MAX14577_CHG_REG_STATUS3	= 0x06,
+	MAX14577_CHG_REG_CHG_CTRL1	= 0x0F,
+	MAX14577_CHG_REG_CHG_CTRL2	= 0x10,
+	MAX14577_CHG_REG_CHG_CTRL3	= 0x11,
+	MAX14577_CHG_REG_CHG_CTRL4	= 0x12,
+	MAX14577_CHG_REG_CHG_CTRL5	= 0x13,
+	MAX14577_CHG_REG_CHG_CTRL6	= 0x14,
+	MAX14577_CHG_REG_CHG_CTRL7	= 0x15,
+
+	MAX14577_CHG_REG_END,
+};
+
+/* MAX14577 STATUS3 register */
+#define STATUS3_EOC_SHIFT		0
+#define STATUS3_CGMBC_SHIFT		1
+#define STATUS3_OVP_SHIFT		2
+#define STATUS3_MBCCHGERR_SHIFT		3
+#define STATUS3_EOC_MASK		(0x1 << STATUS3_EOC_SHIFT)
+#define STATUS3_CGMBC_MASK		(0x1 << STATUS3_CGMBC_SHIFT)
+#define STATUS3_OVP_MASK		(0x1 << STATUS3_OVP_SHIFT)
+#define STATUS3_MBCCHGERR_MASK		(0x1 << STATUS3_MBCCHGERR_SHIFT)
+
+/* MAX14577 CDETCTRL1 register */
+#define CDETCTRL1_CHGDETEN_SHIFT	0
+#define CDETCTRL1_CHGTYPMAN_SHIFT	1
+#define CDETCTRL1_DCDEN_SHIFT		2
+#define CDETCTRL1_DCD2SCT_SHIFT		3
+#define CDETCTRL1_DCHKTM_SHIFT		4
+#define CDETCTRL1_DBEXIT_SHIFT		5
+#define CDETCTRL1_DBIDLE_SHIFT		6
+#define CDETCTRL1_CDPDET_SHIFT		7
+#define CDETCTRL1_CHGDETEN_MASK		(0x1 << CDETCTRL1_CHGDETEN_SHIFT)
+#define CDETCTRL1_CHGTYPMAN_MASK	(0x1 << CDETCTRL1_CHGTYPMAN_SHIFT)
+#define CDETCTRL1_DCDEN_MASK		(0x1 << CDETCTRL1_DCDEN_SHIFT)
+#define CDETCTRL1_DCD2SCT_MASK		(0x1 << CDETCTRL1_DCD2SCT_SHIFT)
+#define CDETCTRL1_DCHKTM_MASK		(0x1 << CDETCTRL1_DCHKTM_SHIFT)
+#define CDETCTRL1_DBEXIT_MASK		(0x1 << CDETCTRL1_DBEXIT_SHIFT)
+#define CDETCTRL1_DBIDLE_MASK		(0x1 << CDETCTRL1_DBIDLE_SHIFT)
+#define CDETCTRL1_CDPDET_MASK		(0x1 << CDETCTRL1_CDPDET_SHIFT)
+
+/* MAX14577 CHGCTRL1 register */
+#define CHGCTRL1_TCHW_SHIFT		4
+#define CHGCTRL1_TCHW_MASK		(0x7 << CHGCTRL1_TCHW_SHIFT)
+
+/* MAX14577 CHGCTRL2 register */
+#define CHGCTRL2_MBCHOSTEN_SHIFT	6
+#define CHGCTRL2_MBCHOSTEN_MASK		(0x1 << CHGCTRL2_MBCHOSTEN_SHIFT)
+#define CHGCTRL2_VCHGR_RC_SHIFT		7
+#define CHGCTRL2_VCHGR_RC_MASK		(0x1 << CHGCTRL2_VCHGR_RC_SHIFT)
+
+/* MAX14577 CHGCTRL3 register */
+#define CHGCTRL3_MBCCVWRC_SHIFT		0
+#define CHGCTRL3_MBCCVWRC_MASK		(0xf << CHGCTRL3_MBCCVWRC_SHIFT)
+
+/* MAX14577 CHGCTRL4 register */
+#define CHGCTRL4_MBCICHWRCH_SHIFT	0
+#define CHGCTRL4_MBCICHWRCH_MASK	(0xf << CHGCTRL4_MBCICHWRCH_SHIFT)
+#define CHGCTRL4_MBCICHWRCL_SHIFT	4
+#define CHGCTRL4_MBCICHWRCL_MASK	(0x1 << CHGCTRL4_MBCICHWRCL_SHIFT)
+
+/* MAX14577 CHGCTRL5 register */
+#define CHGCTRL5_EOCS_SHIFT		0
+#define CHGCTRL5_EOCS_MASK		(0xf << CHGCTRL5_EOCS_SHIFT)
+
+/* MAX14577 CHGCTRL6 register */
+#define CHGCTRL6_AUTOSTOP_SHIFT		5
+#define CHGCTRL6_AUTOSTOP_MASK		(0x1 << CHGCTRL6_AUTOSTOP_SHIFT)
+
+/* MAX14577 CHGCTRL7 register */
+#define CHGCTRL7_OTPCGHCVS_SHIFT	0
+#define CHGCTRL7_OTPCGHCVS_MASK		(0x3 << CHGCTRL7_OTPCGHCVS_SHIFT)
+
+/* MAX14577 regulator current limits (as in CHGCTRL4 register), uA */
+#define MAX14577_REGULATOR_CURRENT_LIMIT_MIN		 90000
+#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START	200000
+#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP	 50000
+#define MAX14577_REGULATOR_CURRENT_LIMIT_MAX		950000
+
+/* MAX14577 regulator SFOUT LDO voltage, fixed, uV */
+#define MAX14577_REGULATOR_SAFEOUT_VOLTAGE		4900000
+
+enum max14577_irq_source {
+	MAX14577_IRQ_INT1 = 0,
+	MAX14577_IRQ_INT2,
+	MAX14577_IRQ_INT3,
+
+	MAX14577_IRQ_REGS_NUM,
+};
+
+enum max14577_irq {
+	/* INT1 */
+	MAX14577_IRQ_INT1_ADC,
+	MAX14577_IRQ_INT1_ADCLOW,
+	MAX14577_IRQ_INT1_ADCERR,
+
+	/* INT2 */
+	MAX14577_IRQ_INT2_CHGTYP,
+	MAX14577_IRQ_INT2_CHGDETRUN,
+	MAX14577_IRQ_INT2_DCDTMR,
+	MAX14577_IRQ_INT2_DBCHG,
+	MAX14577_IRQ_INT2_VBVOLT,
+
+	/* INT3 */
+	MAX14577_IRQ_INT3_EOC,
+	MAX14577_IRQ_INT3_CGMBC,
+	MAX14577_IRQ_INT3_OVP,
+	MAX14577_IRQ_INT3_MBCCHGERR,
+
+	MAX14577_IRQ_NUM,
+};
+
+struct max14577 {
+	struct device *dev;
+	struct i2c_client *i2c; /* Slave addr = 0x4A */
+
+	struct regmap *regmap;
+
+	struct regmap_irq_chip_data *irq_data;
+	int irq;
+
+	/* Device ID */
+	u8 vendor_id;	/* Vendor Identification */
+	u8 device_id;	/* Chip Version */
+};
+
+/* MAX14577 shared regmap API function */
+static inline int max14577_read_reg(struct regmap *map, u8 reg, u8 *dest)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(map, reg, &val);
+	*dest = val;
+
+	return ret;
+}
+
+static inline int max14577_bulk_read(struct regmap *map, u8 reg, u8 *buf,
+		int count)
+{
+	return regmap_bulk_read(map, reg, buf, count);
+}
+
+static inline int max14577_write_reg(struct regmap *map, u8 reg, u8 value)
+{
+	return regmap_write(map, reg, value);
+}
+
+static inline int max14577_bulk_write(struct regmap *map, u8 reg, u8 *buf,
+		int count)
+{
+	return regmap_bulk_write(map, reg, buf, count);
+}
+
+static inline int max14577_update_reg(struct regmap *map, u8 reg, u8 mask,
+		u8 val)
+{
+	return regmap_update_bits(map, reg, mask, val);
+}
+
+#endif /* __MAX14577_PRIVATE_H__ */

include/linux/mfd/max14577.h

@@ -0,0 +1,69 @@
+/*
+ * max14577.h - Driver for the Maxim 14577
+ *
+ * Copyright (C) 2013 Samsung Electrnoics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver is based on max8997.h
+ *
+ * MAX14577 has MUIC, Charger devices.
+ * The devices share the same I2C bus and interrupt line
+ * included in this mfd driver.
+ */
+
+#ifndef __MAX14577_H__
+#define __MAX14577_H__
+
+#include <linux/mfd/max14577-private.h>
+#include <linux/regulator/consumer.h>
+
+/*
+ * MAX14577 Regulator
+ */
+
+/* MAX14577 regulator IDs */
+enum max14577_regulators {
+	MAX14577_SAFEOUT = 0,
+	MAX14577_CHARGER,
+
+	MAX14577_REG_MAX,
+};
+
+struct max14577_regulator_platform_data {
+	int id;
+	struct regulator_init_data *initdata;
+	struct device_node *of_node;
+};
+
+/*
+ * MAX14577 MFD platform data
+ */
+struct max14577_platform_data {
+	/* IRQ */
+	int irq_base;
+
+	/* current control GPIOs */
+	int gpio_pogo_vbatt_en;
+	int gpio_pogo_vbus_en;
+
+	/* current control GPIO control function */
+	int (*set_gpio_pogo_vbatt_en) (int gpio_val);
+	int (*set_gpio_pogo_vbus_en) (int gpio_val);
+
+	int (*set_gpio_pogo_cb) (int new_dev);
+
+	struct max14577_regulator_platform_data *regulators;
+};
+
+#endif /* __MAX14577_H__ */

include/linux/mfd/max77686-private.h

@@ -1,5 +1,5 @@
 /*
- * max77686.h - Voltage regulator driver for the Maxim 77686
+ * max77686-private.h - Voltage regulator driver for the Maxim 77686
  *
  *  Copyright (C) 2012 Samsung Electrnoics
  *  Chiwoong Byun <woong.byun@samsung.com>

include/linux/mfd/max8997-private.h

@@ -1,5 +1,5 @@
 /*
- * max8997.h - Voltage regulator driver for the Maxim 8997
+ * max8997-private.h - Voltage regulator driver for the Maxim 8997
  *
  *  Copyright (C) 2010 Samsung Electrnoics
  *  MyungJoo Ham <myungjoo.ham@samsung.com>

include/linux/mfd/max8998-private.h

@@ -1,5 +1,5 @@
 /*
- * max8998.h - Voltage regulator driver for the Maxim 8998
+ * max8998-private.h - Voltage regulator driver for the Maxim 8998
  *
  *  Copyright (C) 2009-2010 Samsung Electrnoics
  *  Kyungmin Park <kyungmin.park@samsung.com>