Merge tag 'omap-for-v4.2/omap1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Merge fixed up omap1 sparse irq support for v4.2 from Tony Lindgren:

Add support for CONFIG_SPARSE_IRQ for omap1. This takes us a bit closer
to making omap1 support multiarch. After this series we still need to
make omap1 use the common clock framework and fix up the drivers to not
rely on includes from mach and plat directories.

Note that this branch depends on a GPIO driver fix in v4.1-rc3
d2d05c65c40e ("gpio: omap: Fix regression for MPUIO interrupts").

* tag 'omap-for-v4.2/omap1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: Fix section mismatch warnings for omap_cfg_reg
  ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected
  ARM: OMAP1: Change interrupt numbering for sparse IRQ
  ARM: omap1: Switch to use MULTI_IRQ
  ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ
  ARM: OMAP1: Move UART defines to prepare for sparse IRQ

arch/arm/Kconfig

@@ -786,8 +786,10 @@ config ARCH_OMAP1
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H if PCCARD
 	select NEED_MACH_MEMORY_H
+	select SPARSE_IRQ
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
 

arch/arm/mach-omap1/ams-delta-fiq-handler.S

@@ -17,11 +17,10 @@
 #include <asm/assembler.h>
 
 #include <mach/board-ams-delta.h>
-
-#include <mach/irqs.h>
 #include <mach/ams-delta-fiq.h>
 
 #include "iomap.h"
+#include "soc.h"
 
 /*
  * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.

arch/arm/mach-omap1/board-ams-delta.c

@@ -626,6 +626,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= ams_delta_init,
 	.init_late	= ams_delta_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-fsample.c

@@ -362,6 +362,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.map_io		= omap_fsample_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_fsample_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-generic.c

@@ -82,6 +82,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-h2.c

@@ -426,6 +426,7 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= h2_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-h3-mmc.c

@@ -16,6 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
+#include "common.h"
 #include "board-h3.h"
 #include "mmc.h"
 

arch/arm/mach-omap1/board-h3.c

@@ -452,6 +452,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= h3_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-htcherald.c

@@ -601,6 +601,7 @@ MACHINE_START(HERALD, "HTC Herald")
 	.map_io         = htcherald_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq       = omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine   = htcherald_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-innovator.c

@@ -456,6 +456,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.map_io		= innovator_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= innovator_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-nokia770.c

@@ -294,6 +294,7 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_nokia770_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-osk.c

@@ -610,6 +610,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= osk_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-palmte.c

@@ -235,6 +235,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_palmte_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-palmtt.c

@@ -282,6 +282,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_palmtt_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-palmz71.c

@@ -297,6 +297,7 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_palmz71_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-perseus2.c

@@ -324,6 +324,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.map_io		= omap_perseus2_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_perseus2_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-sx1.c

@@ -343,6 +343,7 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_sx1_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/board-voiceblue.c

@@ -288,6 +288,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
+	.handle_irq	= omap1_handle_irq,
 	.init_machine	= voiceblue_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,

arch/arm/mach-omap1/common.h

@@ -30,10 +30,14 @@
 #include <linux/i2c-omap.h>
 #include <linux/reboot.h>
 
+#include <asm/exception.h>
+
 #include <plat/i2c.h>
 
 #include <mach/irqs.h>
 
+#include "soc.h"
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
 #else
@@ -73,6 +77,7 @@ static inline int omap_serial_wakeup_init(void)
 
 void omap1_init_early(void);
 void omap1_init_irq(void);
+void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs);
 void omap1_init_late(void);
 void omap1_restart(enum reboot_mode, const char *);
 
@@ -91,8 +96,6 @@ static inline int __init omap_32k_timer_init(void)
 }
 #endif
 
-extern u32 omap_irq_flags;
-
 #ifdef CONFIG_ARCH_OMAP16XX
 extern int ocpi_enable(void);
 #else

arch/arm/mach-omap1/dma.c

@@ -28,7 +28,7 @@
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
 
-#include <mach/irqs.h>
+#include "soc.h"
 
 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17

arch/arm/mach-omap1/gpio16xx.c

@@ -21,6 +21,8 @@
 
 #include <mach/irqs.h>
 
+#include "soc.h"
+
 #define OMAP1610_GPIO1_BASE		0xfffbe400
 #define OMAP1610_GPIO2_BASE		0xfffbec00
 #define OMAP1610_GPIO3_BASE		0xfffbb400

arch/arm/mach-omap1/gpio7xx.c

@@ -21,6 +21,8 @@
 
 #include <mach/irqs.h>
 
+#include "soc.h"
+
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
 #define OMAP7XX_GPIO2_BASE		0xfffbc800
 #define OMAP7XX_GPIO3_BASE		0xfffbd000

arch/arm/mach-omap1/i2c.c

@@ -27,7 +27,6 @@
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
-#define OMAP1_INT_I2C		(32 + 4)
 
 static const char name[] = "omap_i2c";
 
@@ -67,7 +66,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
 	res[0].start = OMAP1_I2C_BASE;
 	res[0].end = res[0].start + OMAP_I2C_SIZE;
 	res[0].flags = IORESOURCE_MEM;
-	res[1].start = OMAP1_INT_I2C;
+	res[1].start = INT_I2C;
 	res[1].flags = IORESOURCE_IRQ;
 	pdev->resource = res;
 

arch/arm/mach-omap1/include/mach/entry-macro.S

@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		ldr	\tmp, =omap_irq_flags	@ irq flags address
-		ldr	\tmp, [\tmp, #0]	@ irq flags value
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, \tmp
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-

arch/arm/mach-omap1/include/mach/irqs.h

@@ -34,84 +34,84 @@
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
  *
  */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
+#define INT_CAMERA		(NR_IRQS_LEGACY + 1)
+#define INT_FIQ			(NR_IRQS_LEGACY + 3)
+#define INT_RTDX		(NR_IRQS_LEGACY + 6)
+#define INT_DSP_MMU_ABORT	(NR_IRQS_LEGACY + 7)
+#define INT_HOST		(NR_IRQS_LEGACY + 8)
+#define INT_ABORT		(NR_IRQS_LEGACY + 9)
+#define INT_BRIDGE_PRIV		(NR_IRQS_LEGACY + 13)
+#define INT_GPIO_BANK1		(NR_IRQS_LEGACY + 14)
+#define INT_UART3		(NR_IRQS_LEGACY + 15)
+#define INT_TIMER3		(NR_IRQS_LEGACY + 16)
+#define INT_DMA_CH0_6		(NR_IRQS_LEGACY + 19)
+#define INT_DMA_CH1_7		(NR_IRQS_LEGACY + 20)
+#define INT_DMA_CH2_8		(NR_IRQS_LEGACY + 21)
+#define INT_DMA_CH3		(NR_IRQS_LEGACY + 22)
+#define INT_DMA_CH4		(NR_IRQS_LEGACY + 23)
+#define INT_DMA_CH5		(NR_IRQS_LEGACY + 24)
+#define INT_TIMER1		(NR_IRQS_LEGACY + 26)
+#define INT_WD_TIMER		(NR_IRQS_LEGACY + 27)
+#define INT_BRIDGE_PUB		(NR_IRQS_LEGACY + 28)
+#define INT_TIMER2		(NR_IRQS_LEGACY + 30)
+#define INT_LCD_CTRL		(NR_IRQS_LEGACY + 31)
 
 /*
  * OMAP-1510 specific IRQ numbers for interrupt handler 1
  */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
+#define INT_1510_IH2_IRQ	(NR_IRQS_LEGACY + 0)
+#define INT_1510_RES2		(NR_IRQS_LEGACY + 2)
+#define INT_1510_SPI_TX		(NR_IRQS_LEGACY + 4)
+#define INT_1510_SPI_RX		(NR_IRQS_LEGACY + 5)
+#define INT_1510_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
+#define INT_1510_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
+#define INT_1510_RES12		(NR_IRQS_LEGACY + 12)
+#define INT_1510_LB_MMU		(NR_IRQS_LEGACY + 17)
+#define INT_1510_RES18		(NR_IRQS_LEGACY + 18)
+#define INT_1510_LOCAL_BUS	(NR_IRQS_LEGACY + 29)
 
 /*
  * OMAP-1610 specific IRQ numbers for interrupt handler 1
  */
 #define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
+#define INT_1610_IH2_FIQ	(NR_IRQS_LEGACY + 2)
+#define INT_1610_McBSP2_TX	(NR_IRQS_LEGACY + 4)
+#define INT_1610_McBSP2_RX	(NR_IRQS_LEGACY + 5)
+#define INT_1610_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
+#define INT_1610_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
+#define INT_1610_LCD_LINE	(NR_IRQS_LEGACY + 12)
+#define INT_1610_GPTIMER1	(NR_IRQS_LEGACY + 17)
+#define INT_1610_GPTIMER2	(NR_IRQS_LEGACY + 18)
+#define INT_1610_SSR_FIFO_0	(NR_IRQS_LEGACY + 29)
 
 /*
  * OMAP-7xx specific IRQ numbers for interrupt handler 1
  */
-#define INT_7XX_IH2_FIQ		0
-#define INT_7XX_IH2_IRQ		1
-#define INT_7XX_USB_NON_ISO	2
-#define INT_7XX_USB_ISO		3
-#define INT_7XX_ICR		4
-#define INT_7XX_EAC		5
-#define INT_7XX_GPIO_BANK1	6
-#define INT_7XX_GPIO_BANK2	7
-#define INT_7XX_GPIO_BANK3	8
-#define INT_7XX_McBSP2TX	10
-#define INT_7XX_McBSP2RX	11
-#define INT_7XX_McBSP2RX_OVF	12
-#define INT_7XX_LCD_LINE	14
-#define INT_7XX_GSM_PROTECT	15
-#define INT_7XX_TIMER3		16
-#define INT_7XX_GPIO_BANK5	17
-#define INT_7XX_GPIO_BANK6	18
-#define INT_7XX_SPGIO_WR	29
+#define INT_7XX_IH2_FIQ		(NR_IRQS_LEGACY + 0)
+#define INT_7XX_IH2_IRQ		(NR_IRQS_LEGACY + 1)
+#define INT_7XX_USB_NON_ISO	(NR_IRQS_LEGACY + 2)
+#define INT_7XX_USB_ISO		(NR_IRQS_LEGACY + 3)
+#define INT_7XX_ICR		(NR_IRQS_LEGACY + 4)
+#define INT_7XX_EAC		(NR_IRQS_LEGACY + 5)
+#define INT_7XX_GPIO_BANK1	(NR_IRQS_LEGACY + 6)
+#define INT_7XX_GPIO_BANK2	(NR_IRQS_LEGACY + 7)
+#define INT_7XX_GPIO_BANK3	(NR_IRQS_LEGACY + 8)
+#define INT_7XX_McBSP2TX	(NR_IRQS_LEGACY + 10)
+#define INT_7XX_McBSP2RX	(NR_IRQS_LEGACY + 11)
+#define INT_7XX_McBSP2RX_OVF	(NR_IRQS_LEGACY + 12)
+#define INT_7XX_LCD_LINE	(NR_IRQS_LEGACY + 14)
+#define INT_7XX_GSM_PROTECT	(NR_IRQS_LEGACY + 15)
+#define INT_7XX_TIMER3		(NR_IRQS_LEGACY + 16)
+#define INT_7XX_GPIO_BANK5	(NR_IRQS_LEGACY + 17)
+#define INT_7XX_GPIO_BANK6	(NR_IRQS_LEGACY + 18)
+#define INT_7XX_SPGIO_WR	(NR_IRQS_LEGACY + 29)
 
 /*
  * IRQ numbers for interrupt handler 2
  *
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
  */
-#define IH2_BASE		32
+#define IH2_BASE		(NR_IRQS_LEGACY + 32)
 
 #define INT_KEYBOARD		(1 + IH2_BASE)
 #define INT_uWireTX		(2 + IH2_BASE)
@@ -255,11 +255,7 @@
 #endif
 #define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
 
-#define NR_IRQS			OMAP_FPGA_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#include <mach/hardware.h>
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq - NR_IRQS_LEGACY) % 32))
 
 #ifdef CONFIG_FIQ
 #define FIQ_START		1024

arch/arm/mach-omap1/include/mach/memory.h

@@ -5,6 +5,9 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
+/* REVISIT: omap1 legacy drivers still rely on this */
+#include <mach/soc.h>
+
 /*
  * Bus address is physical address, except for OMAP-1510 Local Bus.
  * OMAP-1510 bus address is translated into a Local Bus address if the
@@ -14,7 +17,6 @@
  * because of the strncmp().
  */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <mach/soc.h>
 
 /*
  * OMAP-1510 Local Bus address offset

arch/arm/mach-omap1/include/mach/serial.h

@@ -27,11 +27,6 @@
  */
 #define OMAP_UART_INFO_OFS	0x3ffc
 
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE	0xfffb0000
-#define OMAP1_UART2_BASE	0xfffb0800
-#define OMAP1_UART3_BASE	0xfffb9800
-
 #define OMAP_PORT_SHIFT		2
 #define OMAP7XX_PORT_SHIFT	0
 

arch/arm/mach-omap1/include/mach/soc.h

@@ -28,6 +28,10 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #ifndef __ASSEMBLY__
 
 #include <linux/bitops.h>

arch/arm/mach-omap1/irq.c

@@ -43,6 +43,7 @@
 #include <linux/io.h>
 
 #include <asm/irq.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 
 #include "soc.h"
@@ -56,66 +57,41 @@
 
 struct omap_irq_bank {
 	unsigned long base_reg;
+	void __iomem *va;
 	unsigned long trigger_map;
 	unsigned long wake_enable;
 };
 
-u32 omap_irq_flags;
+static u32 omap_l2_irq;
 static unsigned int irq_bank_count;
 static struct omap_irq_bank *irq_banks;
+static struct irq_domain *domain;
 
-static inline void irq_bank_writel(unsigned long value, int bank, int offset)
-{
-	omap_writel(value, irq_banks[bank].base_reg + offset);
-}
-
-static void omap_ack_irq(struct irq_data *d)
+static inline unsigned int irq_bank_readl(int bank, int offset)
 {
-	if (d->irq > 31)
-		omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
-
-	omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
+	return readl_relaxed(irq_banks[bank].va + offset);
 }
-
-static void omap_mask_irq(struct irq_data *d)
+static inline void irq_bank_writel(unsigned long value, int bank, int offset)
 {
-	int bank = IRQ_BANK(d->irq);
-	u32 l;
-
-	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-	l |= 1 << IRQ_BIT(d->irq);
-	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+	writel_relaxed(value, irq_banks[bank].va + offset);
 }
 
-static void omap_unmask_irq(struct irq_data *d)
+static void omap_ack_irq(int irq)
 {
-	int bank = IRQ_BANK(d->irq);
-	u32 l;
+	if (irq > 31)
+		writel_relaxed(0x1, irq_banks[1].va + IRQ_CONTROL_REG_OFFSET);
 
-	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-	l &= ~(1 << IRQ_BIT(d->irq));
-	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+	writel_relaxed(0x1, irq_banks[0].va + IRQ_CONTROL_REG_OFFSET);
 }
 
 static void omap_mask_ack_irq(struct irq_data *d)
 {
-	omap_mask_irq(d);
-	omap_ack_irq(d);
-}
-
-static int omap_wake_irq(struct irq_data *d, unsigned int enable)
-{
-	int bank = IRQ_BANK(d->irq);
-
-	if (enable)
-		irq_banks[bank].wake_enable |= IRQ_BIT(d->irq);
-	else
-		irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
 
-	return 0;
+	ct->chip.irq_mask(d);
+	omap_ack_irq(d->irq);
 }
 
-
 /*
  * Allows tuning the IRQ type and priority
  *
@@ -165,46 +141,105 @@ static struct omap_irq_bank omap1610_irq_banks[] = {
 };
 #endif
 
-static struct irq_chip omap_irq_chip = {
-	.name		= "MPU",
-	.irq_ack	= omap_mask_ack_irq,
-	.irq_mask	= omap_mask_irq,
-	.irq_unmask	= omap_unmask_irq,
-	.irq_set_wake	= omap_wake_irq,
-};
+asmlinkage void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs)
+{
+	void __iomem *l1 = irq_banks[0].va;
+	void __iomem *l2 = irq_banks[1].va;
+	u32 irqnr;
+
+	do {
+		irqnr = readl_relaxed(l1 + IRQ_ITR_REG_OFFSET);
+		irqnr &= ~(readl_relaxed(l1 + IRQ_MIR_REG_OFFSET) & 0xffffffff);
+		if (!irqnr)
+			break;
+
+		irqnr = readl_relaxed(l1 + IRQ_SIR_FIQ_REG_OFFSET);
+		if (irqnr)
+			goto irq;
+
+		irqnr = readl_relaxed(l1 + IRQ_SIR_IRQ_REG_OFFSET);
+		if (irqnr == omap_l2_irq) {
+			irqnr = readl_relaxed(l2 + IRQ_SIR_IRQ_REG_OFFSET);
+			if (irqnr)
+				irqnr += 32;
+		}
+irq:
+		if (irqnr)
+			handle_domain_irq(domain, irqnr, regs);
+		else
+			break;
+	} while (irqnr);
+}
+
+static __init void
+omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("MPU", 1, irq_start, base,
+				    handle_level_irq);
+	ct = gc->chip_types;
+	ct->chip.irq_ack = omap_mask_ack_irq;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_wake = irq_gc_set_wake;
+	ct->regs.mask = IRQ_MIR_REG_OFFSET;
+	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+}
 
 void __init omap1_init_irq(void)
 {
-	int i, j;
+	struct irq_chip_type *ct;
+	struct irq_data *d = NULL;
+	int i, j, irq_base;
+	unsigned long nr_irqs;
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 	if (cpu_is_omap7xx()) {
-		omap_irq_flags = INT_7XX_IH2_IRQ;
 		irq_banks = omap7xx_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap1510_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 	}
 	if (cpu_is_omap310()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap310_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap1610_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
 	}
 #endif
-	printk("Total of %i interrupts in %i interrupt banks\n",
-	       irq_bank_count * 32, irq_bank_count);
+
+	for (i = 0; i < irq_bank_count; i++) {
+		irq_banks[i].va = ioremap(irq_banks[i].base_reg, 0xff);
+		if (WARN_ON(!irq_banks[i].va))
+			return;
+	}
+
+	nr_irqs = irq_bank_count * 32;
+
+	irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+	if (irq_base < 0) {
+		pr_warn("Couldn't allocate IRQ numbers\n");
+		irq_base = 0;
+	}
+	omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base;
+	omap_l2_irq -= NR_IRQS_LEGACY;
+
+	domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
+				       &irq_domain_simple_ops, NULL);
+
+	pr_info("Total of %lu interrupts in %i interrupt banks\n",
+		nr_irqs, irq_bank_count);
 
 	/* Mask and clear all interrupts */
 	for (i = 0; i < irq_bank_count; i++) {
@@ -227,19 +262,15 @@ void __init omap1_init_irq(void)
 
 			irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
 			omap_irq_set_cfg(j, 0, 0, irq_trigger);
-
-			irq_set_chip_and_handler(j, &omap_irq_chip,
-						 handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
 		}
+		omap_alloc_gc(irq_banks[i].va, irq_base + i * 32, 32);
 	}
 
 	/* Unmask level 2 handler */
-
-	if (cpu_is_omap7xx())
-		omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ));
-	else if (cpu_is_omap15xx())
-		omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ));
-	else if (cpu_is_omap16xx())
-		omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ));
+	d = irq_get_irq_data(irq_find_mapping(domain, omap_l2_irq));
+	if (d) {
+		ct = irq_data_get_chip_type(d);
+		ct->chip.irq_unmask(d);
+	}
 }

arch/arm/mach-omap1/mux.c

@@ -36,7 +36,7 @@
 static struct omap_mux_cfg arch_mux_cfg;
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct pin_config __initdata_or_module omap7xx_pins[] = {
+static struct pin_config omap7xx_pins[] = {
 MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
 MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
 MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
@@ -82,7 +82,7 @@ MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
 #endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-static struct pin_config __initdata_or_module omap1xxx_pins[] = {
+static struct pin_config omap1xxx_pins[] = {
 /*
  *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
  *				reg  offset mode reg  bit   ena	  reg
@@ -343,7 +343,7 @@ MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
 #define OMAP1XXX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
 
-static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+static int omap1_cfg_reg(const struct pin_config *cfg)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 	unsigned long flags;
@@ -469,7 +469,7 @@ int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
 /*
  * Sets the Omap MUX and PULL_DWN registers based on the table
  */
-int __init_or_module omap_cfg_reg(const unsigned long index)
+int omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 

arch/arm/mach-omap1/pm.c

@@ -62,6 +62,7 @@
 #include "iomap.h"
 #include "clock.h"
 #include "pm.h"
+#include "soc.h"
 #include "sram.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];

arch/arm/mach-omap1/serial.c

@@ -25,6 +25,7 @@
 #include <mach/mux.h>
 
 #include "pm.h"
+#include "soc.h"
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;

arch/arm/mach-omap1/timer.c

@@ -27,10 +27,10 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
 
-#include <mach/irqs.h>
-
 #include <plat/dmtimer.h>
 
+#include "soc.h"
+
 #define OMAP1610_GPTIMER1_BASE		0xfffb1400
 #define OMAP1610_GPTIMER2_BASE		0xfffb1c00
 #define OMAP1610_GPTIMER3_BASE		0xfffb2400

arch/arm/plat-omap/dma.c

@@ -38,6 +38,10 @@
 
 #include <linux/omap-dma.h>
 
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
+#endif
+
 /*
  * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
  * channels that an instance of the SDMA IP block can support.  Used

include/uapi/linux/serial_reg.h

@@ -331,6 +331,9 @@
  * Extra serial register definitions for the internal UARTs
  * in TI OMAP processors.
  */
+#define OMAP1_UART1_BASE	0xfffb0000
+#define OMAP1_UART2_BASE	0xfffb0800
+#define OMAP1_UART3_BASE	0xfffb9800
 #define UART_OMAP_MDR1		0x08	/* Mode definition register */
 #define UART_OMAP_MDR2		0x09	/* Mode definition register 2 */
 #define UART_OMAP_SCR		0x10	/* Supplementary control register */