Просмотр исходного кода

net: dsa: b53: Export b53_imp_vlan_setup()

bcm_sf2 and b53 do exactly the same thing, so share that piece.

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli 8 лет назад
Родитель
Сommit
aac028672c
3 измененных файлов с 4 добавлено и 23 удалено
  1. 2 1
      drivers/net/dsa/b53/b53_common.c
  2. 1 0
      drivers/net/dsa/b53/b53_priv.h
  3. 1 22
      drivers/net/dsa/bcm_sf2.c

+ 2 - 1
drivers/net/dsa/b53/b53_common.c

@@ -484,7 +484,7 @@ static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
 	return b53_flush_arl(dev, FAST_AGE_VLAN);
 }
 
-static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 {
 	struct b53_device *dev = ds->priv;
 	unsigned int i;
@@ -500,6 +500,7 @@ static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
 	}
 }
+EXPORT_SYMBOL(b53_imp_vlan_setup);
 
 static int b53_enable_port(struct dsa_switch *ds, int port,
 			   struct phy_device *phy)

+ 1 - 0
drivers/net/dsa/b53/b53_priv.h

@@ -284,6 +284,7 @@ static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
 #endif
 
 /* Exported functions towards other drivers */
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port);
 void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data);
 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
 int b53_get_sset_count(struct dsa_switch *ds);

+ 1 - 22
drivers/net/dsa/bcm_sf2.c

@@ -40,27 +40,6 @@ static enum dsa_tag_protocol bcm_sf2_sw_get_tag_protocol(struct dsa_switch *ds)
 	return DSA_TAG_PROTO_BRCM;
 }
 
-static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	unsigned int i;
-	u32 reg;
-
-	/* Enable the IMP Port to be in the same VLAN as the other ports
-	 * on a per-port basis such that we only have Port i and IMP in
-	 * the same VLAN.
-	 */
-	for (i = 0; i < priv->hw_params.num_ports; i++) {
-		if (!((1 << i) & ds->enabled_port_mask))
-			continue;
-
-		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
-		reg |= (1 << cpu_port);
-		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
-	}
-}
-
-
 static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
@@ -240,7 +219,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	reg |= priv->dev->ports[port].vlan_ctl_mask;
 	core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
 
-	bcm_sf2_imp_vlan_setup(ds, cpu_port);
+	b53_imp_vlan_setup(ds, cpu_port);
 
 	/* If EEE was enabled, restore it */
 	if (priv->dev->ports[port].eee.eee_enabled)