Merge tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Support for MMC power sequences.
   - SDIO function devicetree subnode parsing.
   - Refactor the hardware reset routines and enable it for SD cards.
   - Various code quality improvements, especially for slot-gpio.

  MMC host:
   - dw_mmc: Various fixes and cleanups.
   - dw_mmc: Convert to mmc_send_tuning().
   - moxart: Fix probe logic.
   - sdhci: Various fixes and cleanups
   - sdhci: Asynchronous request handling support.
   - sdhci-pxav3: Various fixes and cleanups.
   - sdhci-tegra: Fixes for T114, T124 and T132.
   - rtsx: Various fixes and cleanups.
   - rtsx: Support for SDIO.
   - sdhi/tmio: Refactor and cleanup of header files.
   - omap_hsmmc: Use slot-gpio and common MMC DT parser.
   - Make all hosts to deal with errors from mmc_of_parse().
   - sunxi: Various fixes and cleanups.
   - sdhci: Support for Fujitsu SDHCI controller f_sdh30"

* tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc: (117 commits)
  mmc: sdhci-s3c: solve problem with sleeping in atomic context
  mmc: pwrseq: add driver for emmc hardware reset
  mmc: moxart: fix probe logic
  mmc: core: Invoke mmc_pwrseq_post_power_on() prior MMC_POWER_ON state
  mmc: pwrseq_simple: Add optional reference clock support
  mmc: pwrseq: Document optional clock for the simple power sequence
  mmc: pwrseq_simple: Extend to support more pins
  mmc: pwrseq: Document that simple sequence support more than one GPIO
  mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
  mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
  mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
  mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
  mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
  mmc: sdhci: switch voltage before sdhci_set_ios in runtime resume
  mmc: tegra: Write xfer_mode, CMD regs in together
  mmc: Resolve BKOPS compatability issue
  mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles
  mmc: dw_mmc: rockchip: remove incorrect __exit_p()
  mmc: dw_mmc: exynos: remove incorrect __exit_p()
  mmc: Fix menuconfig alignment of MMC_SDHCI_* options
  ...

Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt

@@ -0,0 +1,25 @@
+* The simple eMMC hardware reset provider
+
+The purpose of this driver is to perform standard eMMC hw reset
+procedure, as descibed by Jedec 4.4 specification. This procedure is
+performed just after MMC core enabled power to the given mmc host (to
+fix possible issues if bootloader has left eMMC card in initialized or
+unknown state), and before performing complete system reboot (also in
+case of emergency reboot call). The latter is needed on boards, which
+doesn't have hardware reset logic connected to emmc card and (limited or
+broken) ROM bootloaders are unable to read second stage from the emmc
+card if the card is left in unknown or already initialized state.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-emmc".
+- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted
+	and then deasserted to perform eMMC card reset. To perform
+	reset procedure as described in Jedec 4.4 specification, the
+	gpio line should be defined as GPIO_ACTIVE_LOW.
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	}

Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt

@@ -0,0 +1,25 @@
+* The simple MMC power sequence provider
+
+The purpose of the simple MMC power sequence provider is to supports a set of
+common properties between various SOC designs. It thus enables us to use the
+same provider for several SOC designs.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-simple".
+
+Optional properties:
+- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted
+	at initialization and prior we start the power up procedure of the card.
+	They will be de-asserted right after the power has been provided to the
+	card.
+- clocks : Must contain an entry for the entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entry:
+  "ext_clock" (External clock provided to the card).
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio1 12 0>;
+	}

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -64,7 +64,43 @@ Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle
 - enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
 
-Example:
+
+MMC power sequences:
+--------------------
+
+System on chip designs may specify a specific MMC power sequence. To
+successfully detect an (e)MMC/SD/SDIO card, that power sequence must be
+maintained while initializing the card.
+
+Optional property:
+- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+	for documentation of MMC power sequence bindings.
+
+
+Use of Function subnodes
+------------------------
+
+On embedded systems the cards connected to a host may need additional
+properties. These can be specified in subnodes to the host controller node.
+The subnodes are identified by the standard 'reg' property.
+Which information exactly can be specified depends on the bindings for the
+SDIO function driver for the subnode, as specified by the compatible string.
+
+Required host node properties when using function subnodes:
+- #address-cells: should be one. The cell is the slot id.
+- #size-cells: should be zero.
+
+Required function subnode properties:
+- compatible: name of SDIO function following generic names recommended practice
+- reg: Must contain the SDIO function number of the function this subnode
+       describes. A value of 0 denotes the memory SD function, values from
+       1 to 7 denote the SDIO functions.
+
+
+Examples
+--------
+
+Basic example:
 
 sdhci@ab000000 {
 	compatible = "sdhci";
@@ -77,4 +113,28 @@ sdhci@ab000000 {
 	max-frequency = <50000000>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
+	mmc-pwrseq = <&sdhci0_pwrseq>
 }
+
+Example with sdio function subnode:
+
+mmc3: mmc@01c12000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&sdhci0_pwrseq>
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm43xx-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 8>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};

Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt

@@ -0,0 +1,30 @@
+* Fujitsu SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_f_sdh30 driver.
+
+Required properties:
+- compatible: "fujitsu,mb86s70-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+  list of phandles and clock-specifier pairs.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+	"iface" - clock used for sdhci interface
+	"core"  - core clock for sdhci controller
+
+Optional properties:
+- vqmmc-supply: phandle to the regulator device tree node, mentioned
+  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+
+Example:
+
+	sdhci1: mmc@36600000 {
+		compatible = "fujitsu,mb86s70-sdhci-3.0";
+		reg = <0 0x36600000 0x1000>;
+		interrupts = <0 172 0x4>,
+			     <0 173 0x4>;
+		bus-width = <4>;
+		vqmmc-supply = <&vccq_sdhci1>;
+		clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+		clock-names = "iface", "core";
+	};

Documentation/devicetree/bindings/mmc/sdhci-pxa.txt

@@ -9,9 +9,13 @@ Required properties:
 - reg:
   * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
     the SDHCI registers.
-  * for "marvell,armada-380-sdhci", two register areas. The first one
-    for the SDHCI registers themselves, and the second one for the
-    AXI/Mbus bridge registers of the SDHCI unit.
+
+  * for "marvell,armada-380-sdhci", three register areas. The first
+    one for the SDHCI registers themselves, the second one for the
+    AXI/Mbus bridge registers of the SDHCI unit, the third one for the
+    SDIO3 Configuration register
+- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
+  for "marvell,armada-380-sdhci"
 - clocks: Array of clocks required for SDHCI; requires at least one for
     I/O clock.
 - clock-names: Array of names corresponding to clocks property; shall be
@@ -35,7 +39,10 @@ sdhci@d4280800 {
 
 sdhci@d8000 {
 	compatible = "marvell,armada-380-sdhci";
-	reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+	reg-names = "sdhci", "mbus", "conf-sdio3";
+	reg = <0xd8000 0x1000>,
+		<0xdc000 0x100>;
+		<0x18454 0x4>;
 	interrupts = <0 25 0x4>;
 	clocks = <&gateclk 17>;
 	clock-names = "io";

arch/arm/mach-omap2/board-omap3pandora.c

@@ -254,12 +254,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card)
 	 * We have TI wl1251 attached to MMC3. Pass this information to
 	 * SDIO core because it can't be probed by normal methods.
 	 */
-	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-	card->cccr.wide_bus = 1;
-	card->cis.vendor = 0x104c;
-	card->cis.device = 0x9066;
-	card->cis.blksize = 512;
-	card->cis.max_dtr = 20000000;
+	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+		card->cccr.wide_bus = 1;
+		card->cis.vendor = 0x104c;
+		card->cis.device = 0x9066;
+		card->cis.blksize = 512;
+		card->cis.max_dtr = 20000000;
+	}
 }
 
 static struct omap2_hsmmc_info omap3pandora_mmc[] = {

drivers/mmc/card/block.c

@@ -2147,7 +2147,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	 */
 
 	snprintf(md->disk->disk_name, sizeof(md->disk->disk_name),
-		 "mmcblk%d%s", md->name_idx, subname ? subname : "");
+		 "mmcblk%u%s", md->name_idx, subname ? subname : "");
 
 	if (mmc_card_mmc(card))
 		blk_queue_logical_block_size(md->queue.queue,
@@ -2193,7 +2193,6 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 {
 	sector_t size;
-	struct mmc_blk_data *md;
 
 	if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
 		/*
@@ -2209,9 +2208,8 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 		size = card->csd.capacity << (card->csd.read_blkbits - 9);
 	}
 
-	md = mmc_blk_alloc_req(card, &card->dev, size, false, NULL,
+	return mmc_blk_alloc_req(card, &card->dev, size, false, NULL,
 					MMC_BLK_DATA_AREA_MAIN);
-	return md;
 }
 
 static int mmc_blk_alloc_part(struct mmc_card *card,

drivers/mmc/card/mmc_test.c

@@ -2342,20 +2342,16 @@ static int mmc_test_hw_reset(struct mmc_test_card *test)
 	struct mmc_host *host = card->host;
 	int err;
 
-	err = mmc_hw_reset_check(host);
+	if (!mmc_card_mmc(card) || !mmc_can_reset(card))
+		return RESULT_UNSUP_CARD;
+
+	err = mmc_hw_reset(host);
 	if (!err)
 		return RESULT_OK;
+	else if (err == -EOPNOTSUPP)
+		return RESULT_UNSUP_HOST;
 
-	if (err == -ENOSYS)
-		return RESULT_FAIL;
-
-	if (err != -EOPNOTSUPP)
-		return err;
-
-	if (!mmc_can_reset(card))
-		return RESULT_UNSUP_CARD;
-
-	return RESULT_UNSUP_HOST;
+	return RESULT_FAIL;
 }
 
 static const struct mmc_test_case mmc_test_cases[] = {

drivers/mmc/core/Makefile

@@ -8,5 +8,5 @@ mmc_core-y			:= core.o bus.o host.o \
 				   sdio.o sdio_ops.o sdio_bus.o \
 				   sdio_cis.o sdio_io.o sdio_irq.o \
 				   quirks.o slot-gpio.o
-
+mmc_core-$(CONFIG_OF)		+= pwrseq.o pwrseq_simple.o pwrseq_emmc.o
 mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o

drivers/mmc/core/bus.c

@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
+#include <linux/of.h>
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
@@ -321,6 +322,8 @@ int mmc_add_card(struct mmc_card *card)
 #endif
 	mmc_init_context_info(card->host);
 
+	card->dev.of_node = mmc_of_find_child_device(card->host, 0);
+
 	ret = device_add(&card->dev);
 	if (ret)
 		return ret;
@@ -349,6 +352,7 @@ void mmc_remove_card(struct mmc_card *card)
 				mmc_hostname(card->host), card->rca);
 		}
 		device_del(&card->dev);
+		of_node_put(card->dev.of_node);
 	}
 
 	put_device(&card->dev);

drivers/mmc/core/core.c

@@ -40,6 +40,7 @@
 #include "bus.h"
 #include "host.h"
 #include "sdio_bus.h"
+#include "pwrseq.h"
 
 #include "mmc_ops.h"
 #include "sd_ops.h"
@@ -185,13 +186,14 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 
 EXPORT_SYMBOL(mmc_request_done);
 
-static void
-mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
+static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
 #ifdef CONFIG_MMC_DEBUG
 	unsigned int i, sz;
 	struct scatterlist *sg;
 #endif
+	if (mmc_card_removed(host->card))
+		return -ENOMEDIUM;
 
 	if (mrq->sbc) {
 		pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
@@ -251,6 +253,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 	mmc_host_clk_hold(host);
 	led_trigger_event(host->led, LED_FULL);
 	host->ops->request(host, mrq);
+
+	return 0;
 }
 
 /**
@@ -271,7 +275,7 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 
 	BUG_ON(!card);
 
-	if (!card->ext_csd.bkops_en || mmc_card_doing_bkops(card))
+	if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
 		return;
 
 	err = mmc_read_bkops_status(card);
@@ -345,29 +349,34 @@ static void mmc_wait_done(struct mmc_request *mrq)
  */
 static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq)
 {
+	int err;
+
 	mrq->done = mmc_wait_data_done;
 	mrq->host = host;
-	if (mmc_card_removed(host->card)) {
-		mrq->cmd->error = -ENOMEDIUM;
+
+	err = mmc_start_request(host, mrq);
+	if (err) {
+		mrq->cmd->error = err;
 		mmc_wait_data_done(mrq);
-		return -ENOMEDIUM;
 	}
-	mmc_start_request(host, mrq);
 
-	return 0;
+	return err;
 }
 
 static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
 {
+	int err;
+
 	init_completion(&mrq->completion);
 	mrq->done = mmc_wait_done;
-	if (mmc_card_removed(host->card)) {
-		mrq->cmd->error = -ENOMEDIUM;
+
+	err = mmc_start_request(host, mrq);
+	if (err) {
+		mrq->cmd->error = err;
 		complete(&mrq->completion);
-		return -ENOMEDIUM;
 	}
-	mmc_start_request(host, mrq);
-	return 0;
+
+	return err;
 }
 
 /*
@@ -1077,6 +1086,30 @@ void mmc_set_ungated(struct mmc_host *host)
 }
 #endif
 
+int mmc_execute_tuning(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	u32 opcode;
+	int err;
+
+	if (!host->ops->execute_tuning)
+		return 0;
+
+	if (mmc_card_mmc(card))
+		opcode = MMC_SEND_TUNING_BLOCK_HS200;
+	else
+		opcode = MMC_SEND_TUNING_BLOCK;
+
+	mmc_host_clk_hold(host);
+	err = host->ops->execute_tuning(host, opcode);
+	mmc_host_clk_release(host);
+
+	if (err)
+		pr_err("%s: tuning execution failed\n", mmc_hostname(host));
+
+	return err;
+}
+
 /*
  * Change the bus mode (open drain/push-pull) of a host.
  */
@@ -1232,6 +1265,34 @@ EXPORT_SYMBOL(mmc_of_parse_voltage);
 
 #endif /* CONFIG_OF */
 
+static int mmc_of_get_func_num(struct device_node *node)
+{
+	u32 reg;
+	int ret;
+
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret < 0)
+		return ret;
+
+	return reg;
+}
+
+struct device_node *mmc_of_find_child_device(struct mmc_host *host,
+		unsigned func_num)
+{
+	struct device_node *node;
+
+	if (!host->parent || !host->parent->of_node)
+		return NULL;
+
+	for_each_child_of_node(host->parent->of_node, node) {
+		if (mmc_of_get_func_num(node) == func_num)
+			return node;
+	}
+
+	return NULL;
+}
+
 #ifdef CONFIG_REGULATOR
 
 /**
@@ -1555,6 +1616,8 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 
 	mmc_host_clk_hold(host);
 
+	mmc_pwrseq_pre_power_on(host);
+
 	host->ios.vdd = fls(ocr) - 1;
 	host->ios.power_mode = MMC_POWER_UP;
 	/* Set initial state and call mmc_set_ios */
@@ -1574,6 +1637,8 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 	 */
 	mmc_delay(10);
 
+	mmc_pwrseq_post_power_on(host);
+
 	host->ios.clock = host->f_init;
 
 	host->ios.power_mode = MMC_POWER_ON;
@@ -1595,6 +1660,8 @@ void mmc_power_off(struct mmc_host *host)
 
 	mmc_host_clk_hold(host);
 
+	mmc_pwrseq_power_off(host);
+
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
@@ -2245,67 +2312,28 @@ static void mmc_hw_reset_for_init(struct mmc_host *host)
 	mmc_host_clk_release(host);
 }
 
-int mmc_can_reset(struct mmc_card *card)
-{
-	u8 rst_n_function;
-
-	if (!mmc_card_mmc(card))
-		return 0;
-	rst_n_function = card->ext_csd.rst_n_function;
-	if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED)
-		return 0;
-	return 1;
-}
-EXPORT_SYMBOL(mmc_can_reset);
-
-static int mmc_do_hw_reset(struct mmc_host *host, int check)
+int mmc_hw_reset(struct mmc_host *host)
 {
-	struct mmc_card *card = host->card;
-
-	if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
-		return -EOPNOTSUPP;
+	int ret;
 
-	if (!card)
+	if (!host->card)
 		return -EINVAL;
 
-	if (!mmc_can_reset(card))
+	mmc_bus_get(host);
+	if (!host->bus_ops || host->bus_dead || !host->bus_ops->reset) {
+		mmc_bus_put(host);
 		return -EOPNOTSUPP;
-
-	mmc_host_clk_hold(host);
-	mmc_set_clock(host, host->f_init);
-
-	host->ops->hw_reset(host);
-
-	/* If the reset has happened, then a status command will fail */
-	if (check) {
-		u32 status;
-
-		if (!mmc_send_status(card, &status)) {
-			mmc_host_clk_release(host);
-			return -ENOSYS;
-		}
 	}
 
-	/* Set initial state and call mmc_set_ios */
-	mmc_set_initial_state(host);
+	ret = host->bus_ops->reset(host);
+	mmc_bus_put(host);
 
-	mmc_host_clk_release(host);
+	pr_warn("%s: tried to reset card\n", mmc_hostname(host));
 
-	return host->bus_ops->power_restore(host);
-}
-
-int mmc_hw_reset(struct mmc_host *host)
-{
-	return mmc_do_hw_reset(host, 0);
+	return ret;
 }
 EXPORT_SYMBOL(mmc_hw_reset);
 
-int mmc_hw_reset_check(struct mmc_host *host)
-{
-	return mmc_do_hw_reset(host, 1);
-}
-EXPORT_SYMBOL(mmc_hw_reset_check);
-
 static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
 {
 	host->f_init = freq;

drivers/mmc/core/core.h

@@ -27,11 +27,15 @@ struct mmc_bus_ops {
 	int (*power_restore)(struct mmc_host *);
 	int (*alive)(struct mmc_host *);
 	int (*shutdown)(struct mmc_host *);
+	int (*reset)(struct mmc_host *);
 };
 
 void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
 void mmc_detach_bus(struct mmc_host *host);
 
+struct device_node *mmc_of_find_child_device(struct mmc_host *host,
+		unsigned func_num);
+
 void mmc_init_erase(struct mmc_card *card);
 
 void mmc_set_chip_select(struct mmc_host *host, int mode);
@@ -82,5 +86,8 @@ void mmc_add_card_debugfs(struct mmc_card *card);
 void mmc_remove_card_debugfs(struct mmc_card *card);
 
 void mmc_init_context_info(struct mmc_host *host);
+
+int mmc_execute_tuning(struct mmc_card *card);
+
 #endif
 

drivers/mmc/core/host.c

@@ -29,13 +29,20 @@
 
 #include "core.h"
 #include "host.h"
+#include "slot-gpio.h"
+#include "pwrseq.h"
 
 #define cls_dev_to_mmc_host(d)	container_of(d, struct mmc_host, class_dev)
 
+static DEFINE_IDR(mmc_host_idr);
+static DEFINE_SPINLOCK(mmc_host_lock);
+
 static void mmc_host_classdev_release(struct device *dev)
 {
 	struct mmc_host *host = cls_dev_to_mmc_host(dev);
-	mutex_destroy(&host->slot.lock);
+	spin_lock(&mmc_host_lock);
+	idr_remove(&mmc_host_idr, host->index);
+	spin_unlock(&mmc_host_lock);
 	kfree(host);
 }
 
@@ -54,9 +61,6 @@ void mmc_unregister_host_class(void)
 	class_unregister(&mmc_host_class);
 }
 
-static DEFINE_IDR(mmc_host_idr);
-static DEFINE_SPINLOCK(mmc_host_lock);
-
 #ifdef CONFIG_MMC_CLKGATE
 static ssize_t clkgate_delay_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
@@ -367,16 +371,10 @@ int mmc_of_parse(struct mmc_host *host)
 
 		ret = mmc_gpiod_request_cd(host, "cd", 0, true,
 					   0, &cd_gpio_invert);
-		if (ret) {
-			if (ret == -EPROBE_DEFER)
-				return ret;
-			if (ret != -ENOENT) {
-				dev_err(host->parent,
-					"Failed to request CD GPIO: %d\n",
-					ret);
-			}
-		} else
+		if (!ret)
 			dev_info(host->parent, "Got CD GPIO\n");
+		else if (ret != -ENOENT)
+			return ret;
 
 		/*
 		 * There are two ways to flag that the CD line is inverted:
@@ -397,16 +395,10 @@ int mmc_of_parse(struct mmc_host *host)
 	ro_cap_invert = of_property_read_bool(np, "wp-inverted");
 
 	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
-	if (ret) {
-		if (ret == -EPROBE_DEFER)
-			goto out;
-		if (ret != -ENOENT) {
-			dev_err(host->parent,
-				"Failed to request WP GPIO: %d\n",
-				ret);
-		}
-	} else
+	if (!ret)
 		dev_info(host->parent, "Got WP GPIO\n");
+	else if (ret != -ENOENT)
+		return ret;
 
 	/* See the comment on CD inversion above */
 	if (ro_cap_invert ^ ro_gpio_invert)
@@ -457,11 +449,7 @@ int mmc_of_parse(struct mmc_host *host)
 		host->dsr_req = 0;
 	}
 
-	return 0;
-
-out:
-	mmc_gpio_free_cd(host);
-	return ret;
+	return mmc_pwrseq_alloc(host);
 }
 
 EXPORT_SYMBOL(mmc_of_parse);
@@ -491,8 +479,10 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 		host->index = err;
 	spin_unlock(&mmc_host_lock);
 	idr_preload_end();
-	if (err < 0)
-		goto free;
+	if (err < 0) {
+		kfree(host);
+		return NULL;
+	}
 
 	dev_set_name(&host->class_dev, "mmc%d", host->index);
 
@@ -501,10 +491,12 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 	host->class_dev.class = &mmc_host_class;
 	device_initialize(&host->class_dev);
 
-	mmc_host_clk_init(host);
+	if (mmc_gpio_alloc(host)) {
+		put_device(&host->class_dev);
+		return NULL;
+	}
 
-	mutex_init(&host->slot.lock);
-	host->slot.cd_irq = -EINVAL;
+	mmc_host_clk_init(host);
 
 	spin_lock_init(&host->lock);
 	init_waitqueue_head(&host->wq);
@@ -525,10 +517,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 	host->max_blk_count = PAGE_CACHE_SIZE / 512;
 
 	return host;
-
-free:
-	kfree(host);
-	return NULL;
 }
 
 EXPORT_SYMBOL(mmc_alloc_host);
@@ -601,10 +589,7 @@ EXPORT_SYMBOL(mmc_remove_host);
  */
 void mmc_free_host(struct mmc_host *host)
 {
-	spin_lock(&mmc_host_lock);
-	idr_remove(&mmc_host_idr, host->index);
-	spin_unlock(&mmc_host_lock);
-
+	mmc_pwrseq_free(host);
 	put_device(&host->class_dev);
 }
 

drivers/mmc/core/mmc.c

@@ -483,11 +483,13 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		/* check whether the eMMC card supports BKOPS */
 		if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
 			card->ext_csd.bkops = 1;
-			card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN];
+			card->ext_csd.man_bkops_en =
+					(ext_csd[EXT_CSD_BKOPS_EN] &
+						EXT_CSD_MANUAL_BKOPS_MASK);
 			card->ext_csd.raw_bkops_status =
 				ext_csd[EXT_CSD_BKOPS_STATUS];
-			if (!card->ext_csd.bkops_en)
-				pr_info("%s: BKOPS_EN bit is not set\n",
+			if (!card->ext_csd.man_bkops_en)
+				pr_info("%s: MAN_BKOPS_EN bit is not set\n",
 					mmc_hostname(card->host));
 		}
 
@@ -1155,38 +1157,6 @@ bus_speed:
 	return err;
 }
 
-const u8 tuning_blk_pattern_4bit[MMC_TUNING_BLK_PATTERN_4BIT_SIZE] = {
-	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
-	0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
-	0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
-	0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
-	0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
-	0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
-	0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
-	0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
-};
-EXPORT_SYMBOL(tuning_blk_pattern_4bit);
-
-const u8 tuning_blk_pattern_8bit[MMC_TUNING_BLK_PATTERN_8BIT_SIZE] = {
-	0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
-	0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
-	0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
-	0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
-	0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
-	0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
-	0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
-	0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
-	0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
-	0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
-	0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
-	0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
-	0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
-	0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
-	0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
-	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
-};
-EXPORT_SYMBOL(tuning_blk_pattern_8bit);
-
 /*
  * Execute tuning sequence to seek the proper bus operating
  * conditions for HS200 and HS400, which sends CMD21 to the device.
@@ -1194,7 +1164,6 @@ EXPORT_SYMBOL(tuning_blk_pattern_8bit);
 static int mmc_hs200_tuning(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
-	int err = 0;
 
 	/*
 	 * Timing should be adjusted to the HS400 target
@@ -1205,18 +1174,7 @@ static int mmc_hs200_tuning(struct mmc_card *card)
 		if (host->ops->prepare_hs400_tuning)
 			host->ops->prepare_hs400_tuning(host, &host->ios);
 
-	if (host->ops->execute_tuning) {
-		mmc_host_clk_hold(host);
-		err = host->ops->execute_tuning(host,
-				MMC_SEND_TUNING_BLOCK_HS200);
-		mmc_host_clk_release(host);
-
-		if (err)
-			pr_err("%s: tuning execution failed\n",
-				mmc_hostname(host));
-	}
-
-	return err;
+	return mmc_execute_tuning(card);
 }
 
 /*
@@ -1296,6 +1254,12 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
 	}
 
+	/*
+	 * Call the optional HC's init_card function to handle quirks.
+	 */
+	if (host->ops->init_card)
+		host->ops->init_card(host, card);
+
 	/*
 	 * For native busses:  set card RCA and quit open drain mode.
 	 */
@@ -1821,6 +1785,46 @@ static int mmc_power_restore(struct mmc_host *host)
 	return ret;
 }
 
+int mmc_can_reset(struct mmc_card *card)
+{
+	u8 rst_n_function;
+
+	rst_n_function = card->ext_csd.rst_n_function;
+	if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED)
+		return 0;
+	return 1;
+}
+EXPORT_SYMBOL(mmc_can_reset);
+
+static int mmc_reset(struct mmc_host *host)
+{
+	struct mmc_card *card = host->card;
+	u32 status;
+
+	if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
+		return -EOPNOTSUPP;
+
+	if (!mmc_can_reset(card))
+		return -EOPNOTSUPP;
+
+	mmc_host_clk_hold(host);
+	mmc_set_clock(host, host->f_init);
+
+	host->ops->hw_reset(host);
+
+	/* If the reset has happened, then a status command will fail */
+	if (!mmc_send_status(card, &status)) {
+		mmc_host_clk_release(host);
+		return -ENOSYS;
+	}
+
+	/* Set initial state and call mmc_set_ios */
+	mmc_set_initial_state(host);
+	mmc_host_clk_release(host);
+
+	return mmc_power_restore(host);
+}
+
 static const struct mmc_bus_ops mmc_ops = {
 	.remove = mmc_remove,
 	.detect = mmc_detect,
@@ -1831,6 +1835,7 @@ static const struct mmc_bus_ops mmc_ops = {
 	.power_restore = mmc_power_restore,
 	.alive = mmc_alive,
 	.shutdown = mmc_shutdown,
+	.reset = mmc_reset,
 };
 
 /*

drivers/mmc/core/mmc_ops.c

@@ -23,6 +23,36 @@
 
 #define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
 
+static const u8 tuning_blk_pattern_4bit[] = {
+	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
+	0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
+	0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
+	0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
+	0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
+	0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
+	0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
+	0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
+};
+
+static const u8 tuning_blk_pattern_8bit[] = {
+	0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
+	0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
+	0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
+	0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
+	0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
+	0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
+	0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
+	0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
+	0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
+	0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
+	0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
+	0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
+	0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
+	0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
+	0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
+	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
+};
+
 static inline int __mmc_send_status(struct mmc_card *card, u32 *status,
 				    bool ignore_crc)
 {

drivers/mmc/core/pwrseq.c

@@ -0,0 +1,112 @@
+/*
+ *  Copyright (C) 2014 Linaro Ltd
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ *  MMC power sequence management
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <linux/mmc/host.h>
+
+#include "pwrseq.h"
+
+struct mmc_pwrseq_match {
+	const char *compatible;
+	int (*alloc)(struct mmc_host *host, struct device *dev);
+};
+
+static struct mmc_pwrseq_match pwrseq_match[] = {
+	{
+		.compatible = "mmc-pwrseq-simple",
+		.alloc = mmc_pwrseq_simple_alloc,
+	}, {
+		.compatible = "mmc-pwrseq-emmc",
+		.alloc = mmc_pwrseq_emmc_alloc,
+	},
+};
+
+static struct mmc_pwrseq_match *mmc_pwrseq_find(struct device_node *np)
+{
+	struct mmc_pwrseq_match *match = ERR_PTR(-ENODEV);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pwrseq_match); i++) {
+		if (of_device_is_compatible(np,	pwrseq_match[i].compatible)) {
+			match = &pwrseq_match[i];
+			break;
+		}
+	}
+
+	return match;
+}
+
+int mmc_pwrseq_alloc(struct mmc_host *host)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+	struct mmc_pwrseq_match *match;
+	int ret = 0;
+
+	np = of_parse_phandle(host->parent->of_node, "mmc-pwrseq", 0);
+	if (!np)
+		return 0;
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	match = mmc_pwrseq_find(np);
+	if (IS_ERR(match)) {
+		ret = PTR_ERR(match);
+		goto err;
+	}
+
+	ret = match->alloc(host, &pdev->dev);
+	if (!ret)
+		dev_info(host->parent, "allocated mmc-pwrseq\n");
+
+err:
+	of_node_put(np);
+	return ret;
+}
+
+void mmc_pwrseq_pre_power_on(struct mmc_host *host)
+{
+	struct mmc_pwrseq *pwrseq = host->pwrseq;
+
+	if (pwrseq && pwrseq->ops && pwrseq->ops->pre_power_on)
+		pwrseq->ops->pre_power_on(host);
+}
+
+void mmc_pwrseq_post_power_on(struct mmc_host *host)
+{
+	struct mmc_pwrseq *pwrseq = host->pwrseq;
+
+	if (pwrseq && pwrseq->ops && pwrseq->ops->post_power_on)
+		pwrseq->ops->post_power_on(host);
+}
+
+void mmc_pwrseq_power_off(struct mmc_host *host)
+{
+	struct mmc_pwrseq *pwrseq = host->pwrseq;
+
+	if (pwrseq && pwrseq->ops && pwrseq->ops->power_off)
+		pwrseq->ops->power_off(host);
+}
+
+void mmc_pwrseq_free(struct mmc_host *host)
+{
+	struct mmc_pwrseq *pwrseq = host->pwrseq;
+
+	if (pwrseq && pwrseq->ops && pwrseq->ops->free)
+		pwrseq->ops->free(host);
+}

drivers/mmc/core/pwrseq.h

@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _MMC_CORE_PWRSEQ_H
+#define _MMC_CORE_PWRSEQ_H
+
+struct mmc_pwrseq_ops {
+	void (*pre_power_on)(struct mmc_host *host);
+	void (*post_power_on)(struct mmc_host *host);
+	void (*power_off)(struct mmc_host *host);
+	void (*free)(struct mmc_host *host);
+};
+
+struct mmc_pwrseq {
+	struct mmc_pwrseq_ops *ops;
+};
+
+#ifdef CONFIG_OF
+
+int mmc_pwrseq_alloc(struct mmc_host *host);
+void mmc_pwrseq_pre_power_on(struct mmc_host *host);
+void mmc_pwrseq_post_power_on(struct mmc_host *host);
+void mmc_pwrseq_power_off(struct mmc_host *host);
+void mmc_pwrseq_free(struct mmc_host *host);
+
+int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev);
+int mmc_pwrseq_emmc_alloc(struct mmc_host *host, struct device *dev);
+
+#else
+
+static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; }
+static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {}
+static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {}
+static inline void mmc_pwrseq_power_off(struct mmc_host *host) {}
+static inline void mmc_pwrseq_free(struct mmc_host *host) {}
+
+#endif
+
+#endif

drivers/mmc/core/pwrseq_emmc.c

@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ *
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Simple eMMC hardware reset provider
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/reboot.h>
+
+#include <linux/mmc/host.h>
+
+#include "pwrseq.h"
+
+struct mmc_pwrseq_emmc {
+	struct mmc_pwrseq pwrseq;
+	struct notifier_block reset_nb;
+	struct gpio_desc *reset_gpio;
+};
+
+static void __mmc_pwrseq_emmc_reset(struct mmc_pwrseq_emmc *pwrseq)
+{
+	gpiod_set_value(pwrseq->reset_gpio, 1);
+	udelay(1);
+	gpiod_set_value(pwrseq->reset_gpio, 0);
+	udelay(200);
+}
+
+static void mmc_pwrseq_emmc_reset(struct mmc_host *host)
+{
+	struct mmc_pwrseq_emmc *pwrseq = container_of(host->pwrseq,
+					struct mmc_pwrseq_emmc, pwrseq);
+
+	__mmc_pwrseq_emmc_reset(pwrseq);
+}
+
+static void mmc_pwrseq_emmc_free(struct mmc_host *host)
+{
+	struct mmc_pwrseq_emmc *pwrseq = container_of(host->pwrseq,
+					struct mmc_pwrseq_emmc, pwrseq);
+
+	unregister_restart_handler(&pwrseq->reset_nb);
+	gpiod_put(pwrseq->reset_gpio);
+	kfree(pwrseq);
+	host->pwrseq = NULL;
+}
+
+static struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = {
+	.post_power_on = mmc_pwrseq_emmc_reset,
+	.free = mmc_pwrseq_emmc_free,
+};
+
+static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,
+				    unsigned long mode, void *cmd)
+{
+	struct mmc_pwrseq_emmc *pwrseq = container_of(this,
+					struct mmc_pwrseq_emmc, reset_nb);
+
+	__mmc_pwrseq_emmc_reset(pwrseq);
+	return NOTIFY_DONE;
+}
+
+int mmc_pwrseq_emmc_alloc(struct mmc_host *host, struct device *dev)
+{
+	struct mmc_pwrseq_emmc *pwrseq;
+	int ret = 0;
+
+	pwrseq = kzalloc(sizeof(struct mmc_pwrseq_emmc), GFP_KERNEL);
+	if (!pwrseq)
+		return -ENOMEM;
+
+	pwrseq->reset_gpio = gpiod_get_index(dev, "reset", 0, GPIOD_OUT_LOW);
+	if (IS_ERR(pwrseq->reset_gpio)) {
+		ret = PTR_ERR(pwrseq->reset_gpio);
+		goto free;
+	}
+
+	/*
+	 * register reset handler to ensure emmc reset also from
+	 * emergency_reboot(), priority 129 schedules it just before
+	 * system reboot
+	 */
+	pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb;
+	pwrseq->reset_nb.priority = 129;
+	register_restart_handler(&pwrseq->reset_nb);
+
+	pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops;
+	host->pwrseq = &pwrseq->pwrseq;
+
+	return 0;
+free:
+	kfree(pwrseq);
+	return ret;
+}

drivers/mmc/core/pwrseq_simple.c

@@ -0,0 +1,145 @@
+/*
+ *  Copyright (C) 2014 Linaro Ltd
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ *  Simple MMC power sequence management
+ */
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+
+#include <linux/mmc/host.h>
+
+#include "pwrseq.h"
+
+struct mmc_pwrseq_simple {
+	struct mmc_pwrseq pwrseq;
+	bool clk_enabled;
+	struct clk *ext_clk;
+	int nr_gpios;
+	struct gpio_desc *reset_gpios[0];
+};
+
+static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
+					      int value)
+{
+	int i;
+
+	for (i = 0; i < pwrseq->nr_gpios; i++)
+		if (!IS_ERR(pwrseq->reset_gpios[i]))
+			gpiod_set_value_cansleep(pwrseq->reset_gpios[i], value);
+}
+
+static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
+{
+	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
+					struct mmc_pwrseq_simple, pwrseq);
+
+	if (!IS_ERR(pwrseq->ext_clk) && !pwrseq->clk_enabled) {
+		clk_prepare_enable(pwrseq->ext_clk);
+		pwrseq->clk_enabled = true;
+	}
+
+	mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
+}
+
+static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host)
+{
+	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
+					struct mmc_pwrseq_simple, pwrseq);
+
+	mmc_pwrseq_simple_set_gpios_value(pwrseq, 0);
+}
+
+static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
+{
+	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
+					struct mmc_pwrseq_simple, pwrseq);
+
+	mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
+
+	if (!IS_ERR(pwrseq->ext_clk) && pwrseq->clk_enabled) {
+		clk_disable_unprepare(pwrseq->ext_clk);
+		pwrseq->clk_enabled = false;
+	}
+}
+
+static void mmc_pwrseq_simple_free(struct mmc_host *host)
+{
+	struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
+					struct mmc_pwrseq_simple, pwrseq);
+	int i;
+
+	for (i = 0; i < pwrseq->nr_gpios; i++)
+		if (!IS_ERR(pwrseq->reset_gpios[i]))
+			gpiod_put(pwrseq->reset_gpios[i]);
+
+	if (!IS_ERR(pwrseq->ext_clk))
+		clk_put(pwrseq->ext_clk);
+
+	kfree(pwrseq);
+	host->pwrseq = NULL;
+}
+
+static struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = {
+	.pre_power_on = mmc_pwrseq_simple_pre_power_on,
+	.post_power_on = mmc_pwrseq_simple_post_power_on,
+	.power_off = mmc_pwrseq_simple_power_off,
+	.free = mmc_pwrseq_simple_free,
+};
+
+int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev)
+{
+	struct mmc_pwrseq_simple *pwrseq;
+	int i, nr_gpios, ret = 0;
+
+	nr_gpios = of_gpio_named_count(dev->of_node, "reset-gpios");
+	if (nr_gpios < 0)
+		nr_gpios = 0;
+
+	pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple) + nr_gpios *
+			 sizeof(struct gpio_desc *), GFP_KERNEL);
+	if (!pwrseq)
+		return -ENOMEM;
+
+	pwrseq->ext_clk = clk_get(dev, "ext_clock");
+	if (IS_ERR(pwrseq->ext_clk) &&
+	    PTR_ERR(pwrseq->ext_clk) != -ENOENT) {
+		ret = PTR_ERR(pwrseq->ext_clk);
+		goto free;
+	}
+
+	for (i = 0; i < nr_gpios; i++) {
+		pwrseq->reset_gpios[i] = gpiod_get_index(dev, "reset", i,
+							 GPIOD_OUT_HIGH);
+		if (IS_ERR(pwrseq->reset_gpios[i]) &&
+		    PTR_ERR(pwrseq->reset_gpios[i]) != -ENOENT &&
+		    PTR_ERR(pwrseq->reset_gpios[i]) != -ENOSYS) {
+			ret = PTR_ERR(pwrseq->reset_gpios[i]);
+
+			while (--i)
+				gpiod_put(pwrseq->reset_gpios[i]);
+
+			goto clk_put;
+		}
+	}
+
+	pwrseq->nr_gpios = nr_gpios;
+	pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
+	host->pwrseq = &pwrseq->pwrseq;
+
+	return 0;
+clk_put:
+	if (!IS_ERR(pwrseq->ext_clk))
+		clk_put(pwrseq->ext_clk);
+free:
+	kfree(pwrseq);
+	return ret;
+}

drivers/mmc/core/sd.c

@@ -660,15 +660,10 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 	 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
-	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning &&
-			(card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
-			 card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) {
-		mmc_host_clk_hold(card->host);
-		err = card->host->ops->execute_tuning(card->host,
-						      MMC_SEND_TUNING_BLOCK);
-		mmc_host_clk_release(card->host);
-	}
-
+	if (!mmc_host_is_spi(card->host) &&
+	    (card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
+	     card->sd_bus_speed == UHS_SDR104_BUS_SPEED))
+		err = mmc_execute_tuning(card);
 out:
 	kfree(status);
 
@@ -932,6 +927,12 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 		memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
 	}
 
+	/*
+	 * Call the optional HC's init_card function to handle quirks.
+	 */
+	if (host->ops->init_card)
+		host->ops->init_card(host, card);
+
 	/*
 	 * For native busses:  get card RCA and quit open drain mode.
 	 */
@@ -1191,6 +1192,12 @@ static int mmc_sd_power_restore(struct mmc_host *host)
 	return ret;
 }
 
+static int mmc_sd_reset(struct mmc_host *host)
+{
+	mmc_power_cycle(host, host->card->ocr);
+	return mmc_sd_power_restore(host);
+}
+
 static const struct mmc_bus_ops mmc_sd_ops = {
 	.remove = mmc_sd_remove,
 	.detect = mmc_sd_detect,
@@ -1201,6 +1208,7 @@ static const struct mmc_bus_ops mmc_sd_ops = {
 	.power_restore = mmc_sd_power_restore,
 	.alive = mmc_sd_alive,
 	.shutdown = mmc_sd_suspend,
+	.reset = mmc_sd_reset,
 };
 
 /*
@@ -1271,4 +1279,3 @@ err:
 
 	return err;
 }
-

drivers/mmc/core/sdio.c

@@ -567,17 +567,11 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 	 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
-	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning &&
-			((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
-			 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) {
-		mmc_host_clk_hold(card->host);
-		err = card->host->ops->execute_tuning(card->host,
-						      MMC_SEND_TUNING_BLOCK);
-		mmc_host_clk_release(card->host);
-	}
-
+	if (!mmc_host_is_spi(card->host) &&
+	    ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
+	     (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)))
+		err = mmc_execute_tuning(card);
 out:
-
 	return err;
 }
 

drivers/mmc/core/sdio_bus.c

@@ -22,7 +22,9 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
+#include <linux/of.h>
 
+#include "core.h"
 #include "sdio_cis.h"
 #include "sdio_bus.h"
 
@@ -295,6 +297,13 @@ static void sdio_acpi_set_handle(struct sdio_func *func)
 static inline void sdio_acpi_set_handle(struct sdio_func *func) {}
 #endif
 
+static void sdio_set_of_node(struct sdio_func *func)
+{
+	struct mmc_host *host = func->card->host;
+
+	func->dev.of_node = mmc_of_find_child_device(host, func->num);
+}
+
 /*
  * Register a new SDIO function with the driver model.
  */
@@ -304,6 +313,7 @@ int sdio_add_func(struct sdio_func *func)
 
 	dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num);
 
+	sdio_set_of_node(func);
 	sdio_acpi_set_handle(func);
 	ret = device_add(&func->dev);
 	if (ret == 0) {
@@ -327,6 +337,7 @@ void sdio_remove_func(struct sdio_func *func)
 
 	dev_pm_domain_detach(&func->dev, false);
 	device_del(&func->dev);
+	of_node_put(func->dev.of_node);
 	put_device(&func->dev);
 }
 

drivers/mmc/core/slot-gpio.c

@@ -18,11 +18,14 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
+#include "slot-gpio.h"
+
 struct mmc_gpio {
 	struct gpio_desc *ro_gpio;
 	struct gpio_desc *cd_gpio;
 	bool override_ro_active_level;
 	bool override_cd_active_level;
+	irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id);
 	char *ro_label;
 	char cd_label[0];
 };
@@ -38,32 +41,20 @@ static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int mmc_gpio_alloc(struct mmc_host *host)
+int mmc_gpio_alloc(struct mmc_host *host)
 {
 	size_t len = strlen(dev_name(host->parent)) + 4;
-	struct mmc_gpio *ctx;
-
-	mutex_lock(&host->slot.lock);
-
-	ctx = host->slot.handler_priv;
-	if (!ctx) {
-		/*
-		 * devm_kzalloc() can be called after device_initialize(), even
-		 * before device_add(), i.e., between mmc_alloc_host() and
-		 * mmc_add_host()
-		 */
-		ctx = devm_kzalloc(&host->class_dev, sizeof(*ctx) + 2 * len,
-				   GFP_KERNEL);
-		if (ctx) {
-			ctx->ro_label = ctx->cd_label + len;
-			snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
-			snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
-			host->slot.handler_priv = ctx;
-		}
+	struct mmc_gpio *ctx = devm_kzalloc(host->parent,
+				sizeof(*ctx) + 2 * len,	GFP_KERNEL);
+
+	if (ctx) {
+		ctx->ro_label = ctx->cd_label + len;
+		snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
+		snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
+		host->slot.handler_priv = ctx;
+		host->slot.cd_irq = -EINVAL;
 	}
 
-	mutex_unlock(&host->slot.lock);
-
 	return ctx ? 0 : -ENOMEM;
 }
 
@@ -103,29 +94,19 @@ EXPORT_SYMBOL(mmc_gpio_get_cd);
  * @gpio: gpio number requested
  *
  * As devm_* managed functions are used in mmc_gpio_request_ro(), client
- * drivers do not need to explicitly call mmc_gpio_free_ro() for freeing up,
- * if the requesting and freeing are only needed at probing and unbinding time
- * for once.  However, if client drivers do something special like runtime
- * switching for write-protection, they are responsible for calling
- * mmc_gpio_request_ro() and mmc_gpio_free_ro() as a pair on their own.
+ * drivers do not need to worry about freeing up memory.
  *
  * Returns zero on success, else an error.
  */
 int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
 {
-	struct mmc_gpio *ctx;
+	struct mmc_gpio *ctx = host->slot.handler_priv;
 	int ret;
 
 	if (!gpio_is_valid(gpio))
 		return -EINVAL;
 
-	ret = mmc_gpio_alloc(host);
-	if (ret < 0)
-		return ret;
-
-	ctx = host->slot.handler_priv;
-
-	ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN,
+	ret = devm_gpio_request_one(host->parent, gpio, GPIOF_DIR_IN,
 				    ctx->ro_label);
 	if (ret < 0)
 		return ret;
@@ -156,8 +137,10 @@ void mmc_gpiod_request_cd_irq(struct mmc_host *host)
 		irq = -EINVAL;
 
 	if (irq >= 0) {
-		ret = devm_request_threaded_irq(&host->class_dev, irq,
-			NULL, mmc_gpio_cd_irqt,
+		if (!ctx->cd_gpio_isr)
+			ctx->cd_gpio_isr = mmc_gpio_cd_irqt;
+		ret = devm_request_threaded_irq(host->parent, irq,
+			NULL, ctx->cd_gpio_isr,
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 			ctx->cd_label, host);
 		if (ret < 0)
@@ -171,6 +154,19 @@ void mmc_gpiod_request_cd_irq(struct mmc_host *host)
 }
 EXPORT_SYMBOL(mmc_gpiod_request_cd_irq);
 
+/* Register an alternate interrupt service routine for
+ * the card-detect GPIO.
+ */
+void mmc_gpio_set_cd_isr(struct mmc_host *host,
+			 irqreturn_t (*isr)(int irq, void *dev_id))
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	WARN_ON(ctx->cd_gpio_isr);
+	ctx->cd_gpio_isr = isr;
+}
+EXPORT_SYMBOL(mmc_gpio_set_cd_isr);
+
 /**
  * mmc_gpio_request_cd - request a gpio for card-detection
  * @host: mmc host
@@ -178,11 +174,7 @@ EXPORT_SYMBOL(mmc_gpiod_request_cd_irq);
  * @debounce: debounce time in microseconds
  *
  * As devm_* managed functions are used in mmc_gpio_request_cd(), client
- * drivers do not need to explicitly call mmc_gpio_free_cd() for freeing up,
- * if the requesting and freeing are only needed at probing and unbinding time
- * for once.  However, if client drivers do something special like runtime
- * switching for card-detection, they are responsible for calling
- * mmc_gpio_request_cd() and mmc_gpio_free_cd() as a pair on their own.
+ * drivers do not need to worry about freeing up memory.
  *
  * If GPIO debouncing is desired, set the debounce parameter to a non-zero
  * value. The caller is responsible for ensuring that the GPIO driver associated
@@ -193,16 +185,10 @@ EXPORT_SYMBOL(mmc_gpiod_request_cd_irq);
 int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 			unsigned int debounce)
 {
-	struct mmc_gpio *ctx;
+	struct mmc_gpio *ctx = host->slot.handler_priv;
 	int ret;
 
-	ret = mmc_gpio_alloc(host);
-	if (ret < 0)
-		return ret;
-
-	ctx = host->slot.handler_priv;
-
-	ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN,
+	ret = devm_gpio_request_one(host->parent, gpio, GPIOF_DIR_IN,
 				    ctx->cd_label);
 	if (ret < 0)
 		/*
@@ -225,55 +211,6 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 }
 EXPORT_SYMBOL(mmc_gpio_request_cd);
 
-/**
- * mmc_gpio_free_ro - free the write-protection gpio
- * @host: mmc host
- *
- * It's provided only for cases that client drivers need to manually free
- * up the write-protection gpio requested by mmc_gpio_request_ro().
- */
-void mmc_gpio_free_ro(struct mmc_host *host)
-{
-	struct mmc_gpio *ctx = host->slot.handler_priv;
-	int gpio;
-
-	if (!ctx || !ctx->ro_gpio)
-		return;
-
-	gpio = desc_to_gpio(ctx->ro_gpio);
-	ctx->ro_gpio = NULL;
-
-	devm_gpio_free(&host->class_dev, gpio);
-}
-EXPORT_SYMBOL(mmc_gpio_free_ro);
-
-/**
- * mmc_gpio_free_cd - free the card-detection gpio
- * @host: mmc host
- *
- * It's provided only for cases that client drivers need to manually free
- * up the card-detection gpio requested by mmc_gpio_request_cd().
- */
-void mmc_gpio_free_cd(struct mmc_host *host)
-{
-	struct mmc_gpio *ctx = host->slot.handler_priv;
-	int gpio;
-
-	if (!ctx || !ctx->cd_gpio)
-		return;
-
-	if (host->slot.cd_irq >= 0) {
-		devm_free_irq(&host->class_dev, host->slot.cd_irq, host);
-		host->slot.cd_irq = -EINVAL;
-	}
-
-	gpio = desc_to_gpio(ctx->cd_gpio);
-	ctx->cd_gpio = NULL;
-
-	devm_gpio_free(&host->class_dev, gpio);
-}
-EXPORT_SYMBOL(mmc_gpio_free_cd);
-
 /**
  * mmc_gpiod_request_cd - request a gpio descriptor for card-detection
  * @host: mmc host
@@ -285,8 +222,7 @@ EXPORT_SYMBOL(mmc_gpio_free_cd);
  * to NULL to ignore
  *
  * Use this function in place of mmc_gpio_request_cd() to use the GPIO
- * descriptor API.  Note that it is paired with mmc_gpiod_free_cd() not
- * mmc_gpio_free_cd().  Note also that it must be called prior to mmc_add_host()
+ * descriptor API.  Note that it must be called prior to mmc_add_host()
  * otherwise the caller must also call mmc_gpiod_request_cd_irq().
  *
  * Returns zero on success, else an error.
@@ -295,16 +231,10 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
 			 unsigned int debounce, bool *gpio_invert)
 {
-	struct mmc_gpio *ctx;
+	struct mmc_gpio *ctx = host->slot.handler_priv;
 	struct gpio_desc *desc;
 	int ret;
 
-	ret = mmc_gpio_alloc(host);
-	if (ret < 0)
-		return ret;
-
-	ctx = host->slot.handler_priv;
-
 	if (!con_id)
 		con_id = ctx->cd_label;
 
@@ -339,8 +269,7 @@ EXPORT_SYMBOL(mmc_gpiod_request_cd);
  * set to NULL to ignore
  *
  * Use this function in place of mmc_gpio_request_ro() to use the GPIO
- * descriptor API.  Note that it is paired with mmc_gpiod_free_ro() not
- * mmc_gpio_free_ro().
+ * descriptor API.
  *
  * Returns zero on success, else an error.
  */
@@ -348,16 +277,10 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
 			 unsigned int debounce, bool *gpio_invert)
 {
-	struct mmc_gpio *ctx;
+	struct mmc_gpio *ctx = host->slot.handler_priv;
 	struct gpio_desc *desc;
 	int ret;
 
-	ret = mmc_gpio_alloc(host);
-	if (ret < 0)
-		return ret;
-
-	ctx = host->slot.handler_priv;
-
 	if (!con_id)
 		con_id = ctx->ro_label;
 
@@ -380,28 +303,3 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
 	return 0;
 }
 EXPORT_SYMBOL(mmc_gpiod_request_ro);
-
-/**
- * mmc_gpiod_free_cd - free the card-detection gpio descriptor
- * @host: mmc host
- *
- * It's provided only for cases that client drivers need to manually free
- * up the card-detection gpio requested by mmc_gpiod_request_cd().
- */
-void mmc_gpiod_free_cd(struct mmc_host *host)
-{
-	struct mmc_gpio *ctx = host->slot.handler_priv;
-
-	if (!ctx || !ctx->cd_gpio)
-		return;
-
-	if (host->slot.cd_irq >= 0) {
-		devm_free_irq(&host->class_dev, host->slot.cd_irq, host);
-		host->slot.cd_irq = -EINVAL;
-	}
-
-	devm_gpiod_put(host->parent, ctx->cd_gpio);
-
-	ctx->cd_gpio = NULL;
-}
-EXPORT_SYMBOL(mmc_gpiod_free_cd);

drivers/mmc/core/slot-gpio.h

@@ -0,0 +1,13 @@
+/*
+  * Copyright (C) 2014 Linaro Ltd
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _MMC_CORE_SLOTGPIO_H
+#define _MMC_CORE_SLOTGPIO_H
+
+int mmc_gpio_alloc(struct mmc_host *host);
+
+#endif

drivers/mmc/host/Kconfig

@@ -57,6 +57,7 @@ config MMC_SDHCI_IO_ACCESSORS
 
 config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
 	bool
+	depends on MMC_SDHCI
 	select MMC_SDHCI_IO_ACCESSORS
 	help
 	  This option is selected by drivers running on big endian hosts
@@ -82,6 +83,7 @@ config MMC_SDHCI_PCI
 config MMC_RICOH_MMC
 	bool "Ricoh MMC Controller Disabler"
 	depends on MMC_SDHCI_PCI
+	default y
 	help
 	  This adds a pci quirk to disable Ricoh MMC Controller. This
 	  proprietary controller is unnecessary because the SDHCI driver
@@ -228,6 +230,7 @@ config MMC_SDHCI_PXAV3
 	tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
 	depends on CLKDEV_LOOKUP
 	depends on MMC_SDHCI_PLTFM
+	depends on ARCH_MMP || COMPILE_TEST
 	default CPU_MMP2
 	help
 	  This selects the Marvell(R) PXAV3 SD Host Controller.
@@ -240,6 +243,7 @@ config MMC_SDHCI_PXAV2
 	tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
 	depends on CLKDEV_LOOKUP
 	depends on MMC_SDHCI_PLTFM
+	depends on ARCH_MMP || COMPILE_TEST
 	default CPU_PXA910
 	help
 	  This selects the Marvell(R) PXAV2 SD Host Controller.
@@ -292,6 +296,17 @@ config MMC_SDHCI_BCM2835
 
 	  If unsure, say N.
 
+config MMC_SDHCI_F_SDH30
+	tristate "SDHCI support for Fujitsu Semiconductor F_SDH30"
+	depends on MMC_SDHCI_PLTFM
+	depends on OF
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  Needed by some Fujitsu SoC for MMC / SD / SDIO support.
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_MOXART
 	tristate "MOXART SD/MMC Host Controller support"
 	depends on ARCH_MOXART && MMC

drivers/mmc/host/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_MMC_SDHCI_PXAV3)	+= sdhci-pxav3.o
 obj-$(CONFIG_MMC_SDHCI_PXAV2)	+= sdhci-pxav2.o
 obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
 obj-$(CONFIG_MMC_SDHCI_SIRF)   	+= sdhci-sirf.o
+obj-$(CONFIG_MMC_SDHCI_F_SDH30)	+= sdhci_f_sdh30.o
 obj-$(CONFIG_MMC_SDHCI_SPEAR)	+= sdhci-spear.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o

drivers/mmc/host/dw_mmc-exynos.c

@@ -21,43 +21,7 @@
 
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
-
-#define NUM_PINS(x)			(x + 2)
-
-#define SDMMC_CLKSEL			0x09C
-#define SDMMC_CLKSEL64			0x0A8
-#define SDMMC_CLKSEL_CCLK_SAMPLE(x)	(((x) & 7) << 0)
-#define SDMMC_CLKSEL_CCLK_DRIVE(x)	(((x) & 7) << 16)
-#define SDMMC_CLKSEL_CCLK_DIVIDER(x)	(((x) & 7) << 24)
-#define SDMMC_CLKSEL_GET_DRV_WD3(x)	(((x) >> 16) & 0x7)
-#define SDMMC_CLKSEL_TIMING(x, y, z)	(SDMMC_CLKSEL_CCLK_SAMPLE(x) |	\
-					SDMMC_CLKSEL_CCLK_DRIVE(y) |	\
-					SDMMC_CLKSEL_CCLK_DIVIDER(z))
-#define SDMMC_CLKSEL_WAKEUP_INT		BIT(11)
-
-#define EXYNOS4210_FIXED_CIU_CLK_DIV	2
-#define EXYNOS4412_FIXED_CIU_CLK_DIV	4
-
-/* Block number in eMMC */
-#define DWMCI_BLOCK_NUM		0xFFFFFFFF
-
-#define SDMMC_EMMCP_BASE	0x1000
-#define SDMMC_MPSECURITY	(SDMMC_EMMCP_BASE + 0x0010)
-#define SDMMC_MPSBEGIN0		(SDMMC_EMMCP_BASE + 0x0200)
-#define SDMMC_MPSEND0		(SDMMC_EMMCP_BASE + 0x0204)
-#define SDMMC_MPSCTRL0		(SDMMC_EMMCP_BASE + 0x020C)
-
-/* SMU control bits */
-#define DWMCI_MPSCTRL_SECURE_READ_BIT		BIT(7)
-#define DWMCI_MPSCTRL_SECURE_WRITE_BIT		BIT(6)
-#define DWMCI_MPSCTRL_NON_SECURE_READ_BIT	BIT(5)
-#define DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT	BIT(4)
-#define DWMCI_MPSCTRL_USE_FUSE_KEY		BIT(3)
-#define DWMCI_MPSCTRL_ECB_MODE			BIT(2)
-#define DWMCI_MPSCTRL_ENCRYPTION		BIT(1)
-#define DWMCI_MPSCTRL_VALID			BIT(0)
-
-#define EXYNOS_CCLKIN_MIN	50000000	/* unit: HZ */
+#include "dw_mmc-exynos.h"
 
 /* Variations in Exynos specific dw-mshc controller */
 enum dw_mci_exynos_type {
@@ -114,11 +78,11 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU ||
 		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
 		mci_writel(host, MPSBEGIN0, 0);
-		mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM);
-		mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT |
-			   DWMCI_MPSCTRL_NON_SECURE_READ_BIT |
-			   DWMCI_MPSCTRL_VALID |
-			   DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT);
+		mci_writel(host, MPSEND0, SDMMC_ENDING_SEC_NR_MAX);
+		mci_writel(host, MPSCTRL0, SDMMC_MPSCTRL_SECURE_WRITE_BIT |
+			   SDMMC_MPSCTRL_NON_SECURE_READ_BIT |
+			   SDMMC_MPSCTRL_VALID |
+			   SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT);
 	}
 
 	return 0;
@@ -127,9 +91,9 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
 static int dw_mci_exynos_setup_clock(struct dw_mci *host)
 {
 	struct dw_mci_exynos_priv_data *priv = host->priv;
-	unsigned long rate = clk_get_rate(host->ciu_clk);
 
-	host->bus_hz = rate / (priv->ciu_div + 1);
+	host->bus_hz /= (priv->ciu_div + 1);
+
 	return 0;
 }
 
@@ -232,8 +196,11 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 			mci_writel(host, CLKSEL, priv->sdr_timing);
 	}
 
-	/* Don't care if wanted clock is zero */
-	if (!wanted)
+	/*
+	 * Don't care if wanted clock is zero or
+	 * ciu clock is unavailable
+	 */
+	if (!wanted || IS_ERR(host->ciu_clk))
 		return;
 
 	/* Guaranteed minimum frequency for cclkin */
@@ -263,10 +230,8 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
 	int ret;
 
 	priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		dev_err(host->dev, "mem alloc failed for private data\n");
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
 		if (of_device_is_compatible(np, exynos_compat[idx].compatible))
@@ -375,64 +340,23 @@ out:
 	return loc;
 }
 
-static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
-					struct dw_mci_tuning_data *tuning_data)
+static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot)
 {
 	struct dw_mci *host = slot->host;
 	struct mmc_host *mmc = slot->mmc;
-	const u8 *blk_pattern = tuning_data->blk_pattern;
-	u8 *blk_test;
-	unsigned int blksz = tuning_data->blksz;
 	u8 start_smpl, smpl, candiates = 0;
 	s8 found = -1;
 	int ret = 0;
 
-	blk_test = kmalloc(blksz, GFP_KERNEL);
-	if (!blk_test)
-		return -ENOMEM;
-
 	start_smpl = dw_mci_exynos_get_clksmpl(host);
 
 	do {
-		struct mmc_request mrq = {NULL};
-		struct mmc_command cmd = {0};
-		struct mmc_command stop = {0};
-		struct mmc_data data = {0};
-		struct scatterlist sg;
-
-		cmd.opcode = opcode;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
-		stop.opcode = MMC_STOP_TRANSMISSION;
-		stop.arg = 0;
-		stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
-
-		data.blksz = blksz;
-		data.blocks = 1;
-		data.flags = MMC_DATA_READ;
-		data.sg = &sg;
-		data.sg_len = 1;
-
-		sg_init_one(&sg, blk_test, blksz);
-		mrq.cmd = &cmd;
-		mrq.stop = &stop;
-		mrq.data = &data;
-		host->mrq = &mrq;
-
 		mci_writel(host, TMOUT, ~0);
 		smpl = dw_mci_exynos_move_next_clksmpl(host);
 
-		mmc_wait_for_req(mmc, &mrq);
+		if (!mmc_send_tuning(mmc))
+			candiates |= (1 << smpl);
 
-		if (!cmd.error && !data.error) {
-			if (!memcmp(blk_pattern, blk_test, blksz))
-				candiates |= (1 << smpl);
-		} else {
-			dev_dbg(host->dev,
-				"Tuning error: cmd.error:%d, data.error:%d\n",
-				cmd.error, data.error);
-		}
 	} while (start_smpl != smpl);
 
 	found = dw_mci_exynos_get_best_clksmpl(candiates);
@@ -441,7 +365,6 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
 	else
 		ret = -EIO;
 
-	kfree(blk_test);
 	return ret;
 }
 
@@ -499,7 +422,7 @@ static const struct dev_pm_ops dw_mci_exynos_pmops = {
 
 static struct platform_driver dw_mci_exynos_pltfm_driver = {
 	.probe		= dw_mci_exynos_probe,
-	.remove		= __exit_p(dw_mci_pltfm_remove),
+	.remove		= dw_mci_pltfm_remove,
 	.driver		= {
 		.name		= "dwmmc_exynos",
 		.of_match_table	= dw_mci_exynos_match,

drivers/mmc/host/dw_mmc-exynos.h

@@ -0,0 +1,56 @@
+/*
+ * Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
+ *
+ * Copyright (C) 2012-2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _DW_MMC_EXYNOS_H_
+#define _DW_MMC_EXYNOS_H_
+
+/* Extended Register's Offset */
+#define SDMMC_CLKSEL			0x09C
+#define SDMMC_CLKSEL64			0x0A8
+
+/* CLKSEL register defines */
+#define SDMMC_CLKSEL_CCLK_SAMPLE(x)	(((x) & 7) << 0)
+#define SDMMC_CLKSEL_CCLK_DRIVE(x)	(((x) & 7) << 16)
+#define SDMMC_CLKSEL_CCLK_DIVIDER(x)	(((x) & 7) << 24)
+#define SDMMC_CLKSEL_GET_DRV_WD3(x)	(((x) >> 16) & 0x7)
+#define SDMMC_CLKSEL_TIMING(x, y, z)	(SDMMC_CLKSEL_CCLK_SAMPLE(x) |	\
+					 SDMMC_CLKSEL_CCLK_DRIVE(y) |	\
+					 SDMMC_CLKSEL_CCLK_DIVIDER(z))
+#define SDMMC_CLKSEL_WAKEUP_INT		BIT(11)
+
+/* Protector Register */
+#define SDMMC_EMMCP_BASE	0x1000
+#define SDMMC_MPSECURITY	(SDMMC_EMMCP_BASE + 0x0010)
+#define SDMMC_MPSBEGIN0		(SDMMC_EMMCP_BASE + 0x0200)
+#define SDMMC_MPSEND0		(SDMMC_EMMCP_BASE + 0x0204)
+#define SDMMC_MPSCTRL0		(SDMMC_EMMCP_BASE + 0x020C)
+
+/* SMU control defines */
+#define SDMMC_MPSCTRL_SECURE_READ_BIT		BIT(7)
+#define SDMMC_MPSCTRL_SECURE_WRITE_BIT		BIT(6)
+#define SDMMC_MPSCTRL_NON_SECURE_READ_BIT	BIT(5)
+#define SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT	BIT(4)
+#define SDMMC_MPSCTRL_USE_FUSE_KEY		BIT(3)
+#define SDMMC_MPSCTRL_ECB_MODE			BIT(2)
+#define SDMMC_MPSCTRL_ENCRYPTION		BIT(1)
+#define SDMMC_MPSCTRL_VALID			BIT(0)
+
+/* Maximum number of Ending sector */
+#define SDMMC_ENDING_SEC_NR_MAX	0xFFFFFFFF
+
+/* Fixed clock divider */
+#define EXYNOS4210_FIXED_CIU_CLK_DIV	2
+#define EXYNOS4412_FIXED_CIU_CLK_DIV	4
+
+/* Minimal required clock frequency for cclkin, unit: HZ */
+#define EXYNOS_CCLKIN_MIN	50000000
+
+#endif /* _DW_MMC_EXYNOS_H_ */

drivers/mmc/host/dw_mmc-rockchip.c

@@ -133,7 +133,7 @@ static SIMPLE_DEV_PM_OPS(dw_mci_rockchip_pmops,
 
 static struct platform_driver dw_mci_rockchip_pltfm_driver = {
 	.probe		= dw_mci_rockchip_probe,
-	.remove		= __exit_p(dw_mci_pltfm_remove),
+	.remove		= dw_mci_pltfm_remove,
 	.driver		= {
 		.name		= "dwmmc_rockchip",
 		.of_match_table	= dw_mci_rockchip_match,

drivers/mmc/host/dw_mmc.c

@@ -27,6 +27,7 @@
 #include <linux/stat.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
@@ -313,7 +314,9 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
 	if (cmdr == MMC_READ_SINGLE_BLOCK ||
 	    cmdr == MMC_READ_MULTIPLE_BLOCK ||
 	    cmdr == MMC_WRITE_BLOCK ||
-	    cmdr == MMC_WRITE_MULTIPLE_BLOCK) {
+	    cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
+	    cmdr == MMC_SEND_TUNING_BLOCK ||
+	    cmdr == MMC_SEND_TUNING_BLOCK_HS200) {
 		stop->opcode = MMC_STOP_TRANSMISSION;
 		stop->arg = 0;
 		stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
@@ -758,6 +761,7 @@ disable:
 
 static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
 {
+	unsigned long irqflags;
 	int sg_len;
 	u32 temp;
 
@@ -794,9 +798,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
 	mci_writel(host, CTRL, temp);
 
 	/* Disable RX/TX IRQs, let DMA handle it */
+	spin_lock_irqsave(&host->irq_lock, irqflags);
 	temp = mci_readl(host, INTMASK);
 	temp  &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
 	mci_writel(host, INTMASK, temp);
+	spin_unlock_irqrestore(&host->irq_lock, irqflags);
 
 	host->dma_ops->start(host, sg_len);
 
@@ -805,6 +811,7 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
 
 static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
 {
+	unsigned long irqflags;
 	u32 temp;
 
 	data->error = -EINPROGRESS;
@@ -833,9 +840,12 @@ static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
 		host->part_buf_count = 0;
 
 		mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
+
+		spin_lock_irqsave(&host->irq_lock, irqflags);
 		temp = mci_readl(host, INTMASK);
 		temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
 		mci_writel(host, INTMASK, temp);
+		spin_unlock_irqrestore(&host->irq_lock, irqflags);
 
 		temp = mci_readl(host, CTRL);
 		temp &= ~SDMMC_CTRL_DMA_ENABLE;
@@ -926,7 +936,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 
 		/* enable clock; only low power if no SDIO */
 		clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
-		if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id)))
+		if (!test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags))
 			clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
 		mci_writel(host, CLKENA, clk_en_a);
 
@@ -1109,6 +1119,12 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				return;
 			}
 		}
+		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
+		regs = mci_readl(slot->host, PWREN);
+		regs |= (1 << slot->id);
+		mci_writel(slot->host, PWREN, regs);
+		break;
+	case MMC_POWER_ON:
 		if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
 			ret = regulator_enable(mmc->supply.vqmmc);
 			if (ret < 0)
@@ -1117,10 +1133,6 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			else
 				slot->host->vqmmc_enabled = true;
 		}
-		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
-		regs = mci_readl(slot->host, PWREN);
-		regs |= (1 << slot->id);
-		mci_writel(slot->host, PWREN, regs);
 		break;
 	case MMC_POWER_OFF:
 		if (!IS_ERR(mmc->supply.vmmc))
@@ -1245,27 +1257,37 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
 	return present;
 }
 
-/*
- * Disable lower power mode.
- *
- * Low power mode will stop the card clock when idle.  According to the
- * description of the CLKENA register we should disable low power mode
- * for SDIO cards if we need SDIO interrupts to work.
- *
- * This function is fast if low power mode is already disabled.
- */
-static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
+static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
 {
+	struct dw_mci_slot *slot = mmc_priv(mmc);
 	struct dw_mci *host = slot->host;
-	u32 clk_en_a;
-	const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
 
-	clk_en_a = mci_readl(host, CLKENA);
+	/*
+	 * Low power mode will stop the card clock when idle.  According to the
+	 * description of the CLKENA register we should disable low power mode
+	 * for SDIO cards if we need SDIO interrupts to work.
+	 */
+	if (mmc->caps & MMC_CAP_SDIO_IRQ) {
+		const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
+		u32 clk_en_a_old;
+		u32 clk_en_a;
 
-	if (clk_en_a & clken_low_pwr) {
-		mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
-		mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
-			     SDMMC_CMD_PRV_DAT_WAIT, 0);
+		clk_en_a_old = mci_readl(host, CLKENA);
+
+		if (card->type == MMC_TYPE_SDIO ||
+		    card->type == MMC_TYPE_SD_COMBO) {
+			set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+			clk_en_a = clk_en_a_old & ~clken_low_pwr;
+		} else {
+			clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+			clk_en_a = clk_en_a_old | clken_low_pwr;
+		}
+
+		if (clk_en_a != clk_en_a_old) {
+			mci_writel(host, CLKENA, clk_en_a);
+			mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
+				     SDMMC_CMD_PRV_DAT_WAIT, 0);
+		}
 	}
 }
 
@@ -1273,25 +1295,20 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
 {
 	struct dw_mci_slot *slot = mmc_priv(mmc);
 	struct dw_mci *host = slot->host;
+	unsigned long irqflags;
 	u32 int_mask;
 
+	spin_lock_irqsave(&host->irq_lock, irqflags);
+
 	/* Enable/disable Slot Specific SDIO interrupt */
 	int_mask = mci_readl(host, INTMASK);
-	if (enb) {
-		/*
-		 * Turn off low power mode if it was enabled.  This is a bit of
-		 * a heavy operation and we disable / enable IRQs a lot, so
-		 * we'll leave low power mode disabled and it will get
-		 * re-enabled again in dw_mci_setup_bus().
-		 */
-		dw_mci_disable_low_power(slot);
+	if (enb)
+		int_mask |= SDMMC_INT_SDIO(slot->sdio_id);
+	else
+		int_mask &= ~SDMMC_INT_SDIO(slot->sdio_id);
+	mci_writel(host, INTMASK, int_mask);
 
-		mci_writel(host, INTMASK,
-			   (int_mask | SDMMC_INT_SDIO(slot->sdio_id)));
-	} else {
-		mci_writel(host, INTMASK,
-			   (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id)));
-	}
+	spin_unlock_irqrestore(&host->irq_lock, irqflags);
 }
 
 static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
@@ -1299,30 +1316,10 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	struct dw_mci_slot *slot = mmc_priv(mmc);
 	struct dw_mci *host = slot->host;
 	const struct dw_mci_drv_data *drv_data = host->drv_data;
-	struct dw_mci_tuning_data tuning_data;
 	int err = -ENOSYS;
 
-	if (opcode == MMC_SEND_TUNING_BLOCK_HS200) {
-		if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
-			tuning_data.blk_pattern = tuning_blk_pattern_8bit;
-			tuning_data.blksz = sizeof(tuning_blk_pattern_8bit);
-		} else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
-			tuning_data.blk_pattern = tuning_blk_pattern_4bit;
-			tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
-		} else {
-			return -EINVAL;
-		}
-	} else if (opcode == MMC_SEND_TUNING_BLOCK) {
-		tuning_data.blk_pattern = tuning_blk_pattern_4bit;
-		tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
-	} else {
-		dev_err(host->dev,
-			"Undefined command(%d) for tuning\n", opcode);
-		return -EINVAL;
-	}
-
 	if (drv_data && drv_data->execute_tuning)
-		err = drv_data->execute_tuning(slot, opcode, &tuning_data);
+		err = drv_data->execute_tuning(slot);
 	return err;
 }
 
@@ -1337,7 +1334,7 @@ static const struct mmc_host_ops dw_mci_ops = {
 	.execute_tuning		= dw_mci_execute_tuning,
 	.card_busy		= dw_mci_card_busy,
 	.start_signal_voltage_switch = dw_mci_switch_voltage,
-
+	.init_card		= dw_mci_init_card,
 };
 
 static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
@@ -2319,9 +2316,9 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 #ifdef CONFIG_MMC_DW_IDMAC
 		mmc->max_segs = host->ring_size;
 		mmc->max_blk_size = 65536;
-		mmc->max_blk_count = host->ring_size;
 		mmc->max_seg_size = 0x1000;
-		mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count;
+		mmc->max_req_size = mmc->max_seg_size * host->ring_size;
+		mmc->max_blk_count = mmc->max_req_size / 512;
 #else
 		mmc->max_segs = 64;
 		mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
@@ -2533,10 +2530,8 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 	u32 clock_frequency;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata) {
-		dev_err(dev, "could not allocate memory for pdata\n");
+	if (!pdata)
 		return ERR_PTR(-ENOMEM);
-	}
 
 	/* find out number of slots supported */
 	if (of_property_read_u32(dev->of_node, "num-slots",
@@ -2660,6 +2655,7 @@ int dw_mci_probe(struct dw_mci *host)
 	host->quirks = host->pdata->quirks;
 
 	spin_lock_init(&host->lock);
+	spin_lock_init(&host->irq_lock);
 	INIT_LIST_HEAD(&host->queue);
 
 	/*

drivers/mmc/host/dw_mmc.h

@@ -244,15 +244,11 @@ struct dw_mci_slot {
 	unsigned long		flags;
 #define DW_MMC_CARD_PRESENT	0
 #define DW_MMC_CARD_NEED_INIT	1
+#define DW_MMC_CARD_NO_LOW_PWR	2
 	int			id;
 	int			sdio_id;
 };
 
-struct dw_mci_tuning_data {
-	const u8 *blk_pattern;
-	unsigned int blksz;
-};
-
 /**
  * dw_mci driver data - dw-mshc implementation specific driver data.
  * @caps: mmc subsystem specified capabilities of the controller(s).
@@ -274,7 +270,6 @@ struct dw_mci_drv_data {
 	void		(*prepare_command)(struct dw_mci *host, u32 *cmdr);
 	void		(*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
 	int		(*parse_dt)(struct dw_mci *host);
-	int		(*execute_tuning)(struct dw_mci_slot *slot, u32 opcode,
-					struct dw_mci_tuning_data *tuning_data);
+	int		(*execute_tuning)(struct dw_mci_slot *slot);
 };
 #endif /* _DW_MMC_H_ */

drivers/mmc/host/mmci.c

@@ -430,7 +430,6 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
 static void mmci_dma_setup(struct mmci_host *host)
 {
 	const char *rxname, *txname;
-	dma_cap_mask_t mask;
 	struct variant_data *variant = host->variant;
 
 	host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx");
@@ -439,10 +438,6 @@ static void mmci_dma_setup(struct mmci_host *host)
 	/* initialize pre request cookie */
 	host->next_data.cookie = 1;
 
-	/* Try to acquire a generic DMA engine slave channel */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
 	/*
 	 * If only an RX channel is specified, the driver will
 	 * attempt to use it bidirectionally, however if it is
@@ -1739,10 +1734,10 @@ static int mmci_probe(struct amba_device *dev,
 
 	pm_runtime_set_autosuspend_delay(&dev->dev, 50);
 	pm_runtime_use_autosuspend(&dev->dev);
-	pm_runtime_put(&dev->dev);
 
 	mmc_add_host(mmc);
 
+	pm_runtime_put(&dev->dev);
 	return 0;
 
  clk_disable:

drivers/mmc/host/moxart-mmc.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/blkdev.h>
 #include <linux/dma-mapping.h>
@@ -562,7 +563,6 @@ static int moxart_probe(struct platform_device *pdev)
 	struct dma_slave_config cfg;
 	struct clk *clk;
 	void __iomem *reg_mmc;
-	dma_cap_mask_t mask;
 	int irq, ret;
 	u32 i;
 
@@ -586,9 +586,8 @@ static int moxart_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	clk = of_clk_get(node, 0);
+	clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(clk)) {
-		dev_err(dev, "of_clk_get failed\n");
 		ret = PTR_ERR(clk);
 		goto out;
 	}
@@ -599,10 +598,9 @@ static int moxart_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	mmc_of_parse(mmc);
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto out;
 
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
@@ -611,8 +609,8 @@ static int moxart_probe(struct platform_device *pdev)
 	host->timeout = msecs_to_jiffies(1000);
 	host->sysclk = clk_get_rate(clk);
 	host->fifo_width = readl(host->base + REG_FEATURE) << 2;
-	host->dma_chan_tx = of_dma_request_slave_channel(node, "tx");
-	host->dma_chan_rx = of_dma_request_slave_channel(node, "rx");
+	host->dma_chan_tx = dma_request_slave_channel_reason(dev, "tx");
+	host->dma_chan_rx = dma_request_slave_channel_reason(dev, "rx");
 
 	spin_lock_init(&host->lock);
 
@@ -622,6 +620,11 @@ static int moxart_probe(struct platform_device *pdev)
 	mmc->ocr_avail = 0xffff00;	/* Support 2.0v - 3.6v power. */
 
 	if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) {
+		if (PTR_ERR(host->dma_chan_tx) == -EPROBE_DEFER ||
+		    PTR_ERR(host->dma_chan_rx) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
+			goto out;
+		}
 		dev_dbg(dev, "PIO mode transfer enabled\n");
 		host->have_dma = false;
 	} else {
@@ -700,9 +703,6 @@ static int moxart_remove(struct platform_device *pdev)
 		writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
 		       host->base + REG_CLOCK_CONTROL);
 	}
-
-	kfree(host);
-
 	return 0;
 }
 

drivers/mmc/host/mvsdio.c

@@ -25,7 +25,6 @@
 #include <linux/of_irq.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <asm/sizes.h>
 #include <asm/unaligned.h>
@@ -704,7 +703,6 @@ static int mvsd_probe(struct platform_device *pdev)
 	const struct mbus_dram_target_info *dram;
 	struct resource *r;
 	int ret, irq;
-	struct pinctrl *pinctrl;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -721,10 +719,6 @@ static int mvsd_probe(struct platform_device *pdev)
 	host->mmc = mmc;
 	host->dev = &pdev->dev;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "no pins associated\n");
-
 	/*
 	 * Some non-DT platforms do not pass a clock, and the clock
 	 * frequency is passed through platform_data. On DT platforms,
@@ -828,8 +822,6 @@ static int mvsd_probe(struct platform_device *pdev)
 
 out:
 	if (mmc) {
-		mmc_gpio_free_cd(mmc);
-		mmc_gpio_free_ro(mmc);
 		if (!IS_ERR(host->clk))
 			clk_disable_unprepare(host->clk);
 		mmc_free_host(mmc);
@@ -844,8 +836,6 @@ static int mvsd_remove(struct platform_device *pdev)
 
 	struct mvsd_host *host = mmc_priv(mmc);
 
-	mmc_gpio_free_cd(mmc);
-	mmc_gpio_free_ro(mmc);
 	mmc_remove_host(mmc);
 	del_timer_sync(&host->timer);
 	mvsd_power_down(host);

drivers/mmc/host/mxs-mmc.c

@@ -677,8 +677,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	return 0;
 
 out_free_dma:
-	if (ssp->dmach)
-		dma_release_channel(ssp->dmach);
+	dma_release_channel(ssp->dmach);
 out_clk_disable:
 	clk_disable_unprepare(ssp->clk);
 out_mmc_free:

drivers/mmc/host/omap_hsmmc.c

@@ -36,6 +36,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/core.h>
 #include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
@@ -251,55 +252,24 @@ static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
 static int omap_hsmmc_card_detect(struct device *dev)
 {
 	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-	struct omap_hsmmc_platform_data *mmc = host->pdata;
 
-	/* NOTE: assumes card detect signal is active-low */
-	return !gpio_get_value_cansleep(mmc->switch_pin);
+	return mmc_gpio_get_cd(host->mmc);
 }
 
 static int omap_hsmmc_get_wp(struct device *dev)
 {
 	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-	struct omap_hsmmc_platform_data *mmc = host->pdata;
 
-	/* NOTE: assumes write protect signal is active-high */
-	return gpio_get_value_cansleep(mmc->gpio_wp);
+	return mmc_gpio_get_ro(host->mmc);
 }
 
 static int omap_hsmmc_get_cover_state(struct device *dev)
 {
 	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-	struct omap_hsmmc_platform_data *mmc = host->pdata;
 
-	/* NOTE: assumes card detect signal is active-low */
-	return !gpio_get_value_cansleep(mmc->switch_pin);
+	return mmc_gpio_get_cd(host->mmc);
 }
 
-#ifdef CONFIG_PM
-
-static int omap_hsmmc_suspend_cdirq(struct device *dev)
-{
-	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-
-	disable_irq(host->card_detect_irq);
-	return 0;
-}
-
-static int omap_hsmmc_resume_cdirq(struct device *dev)
-{
-	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-
-	enable_irq(host->card_detect_irq);
-	return 0;
-}
-
-#else
-
-#define omap_hsmmc_suspend_cdirq	NULL
-#define omap_hsmmc_resume_cdirq		NULL
-
-#endif
-
 #ifdef CONFIG_REGULATOR
 
 static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
@@ -464,7 +434,10 @@ static inline int omap_hsmmc_have_reg(void)
 
 #endif
 
-static int omap_hsmmc_gpio_init(struct omap_hsmmc_host *host,
+static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id);
+
+static int omap_hsmmc_gpio_init(struct mmc_host *mmc,
+				struct omap_hsmmc_host *host,
 				struct omap_hsmmc_platform_data *pdata)
 {
 	int ret;
@@ -477,46 +450,24 @@ static int omap_hsmmc_gpio_init(struct omap_hsmmc_host *host,
 			host->card_detect = omap_hsmmc_card_detect;
 		host->card_detect_irq =
 				gpio_to_irq(pdata->switch_pin);
-		ret = gpio_request(pdata->switch_pin, "mmc_cd");
+		mmc_gpio_set_cd_isr(mmc, omap_hsmmc_detect);
+		ret = mmc_gpio_request_cd(mmc, pdata->switch_pin, 0);
 		if (ret)
 			return ret;
-		ret = gpio_direction_input(pdata->switch_pin);
-		if (ret)
-			goto err_free_sp;
 	} else {
 		pdata->switch_pin = -EINVAL;
 	}
 
 	if (gpio_is_valid(pdata->gpio_wp)) {
 		host->get_ro = omap_hsmmc_get_wp;
-		ret = gpio_request(pdata->gpio_wp, "mmc_wp");
-		if (ret)
-			goto err_free_cd;
-		ret = gpio_direction_input(pdata->gpio_wp);
+		ret = mmc_gpio_request_ro(mmc, pdata->gpio_wp);
 		if (ret)
-			goto err_free_wp;
+			return ret;
 	} else {
 		pdata->gpio_wp = -EINVAL;
 	}
 
 	return 0;
-
-err_free_wp:
-	gpio_free(pdata->gpio_wp);
-err_free_cd:
-	if (gpio_is_valid(pdata->switch_pin))
-err_free_sp:
-		gpio_free(pdata->switch_pin);
-	return ret;
-}
-
-static void omap_hsmmc_gpio_free(struct omap_hsmmc_host *host,
-				 struct omap_hsmmc_platform_data *pdata)
-{
-	if (gpio_is_valid(pdata->gpio_wp))
-		gpio_free(pdata->gpio_wp);
-	if (gpio_is_valid(pdata->switch_pin))
-		gpio_free(pdata->switch_pin);
 }
 
 /*
@@ -1978,13 +1929,6 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 {
 	struct omap_hsmmc_platform_data *pdata;
 	struct device_node *np = dev->of_node;
-	u32 bus_width, max_freq;
-	int cd_gpio, wp_gpio;
-
-	cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
-	wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
-	if (cd_gpio == -EPROBE_DEFER || wp_gpio == -EPROBE_DEFER)
-		return ERR_PTR(-EPROBE_DEFER);
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -1993,34 +1937,20 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 	if (of_find_property(np, "ti,dual-volt", NULL))
 		pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
 
-	pdata->switch_pin = cd_gpio;
-	pdata->gpio_wp = wp_gpio;
+	pdata->switch_pin = -EINVAL;
+	pdata->gpio_wp = -EINVAL;
 
 	if (of_find_property(np, "ti,non-removable", NULL)) {
 		pdata->nonremovable = true;
 		pdata->no_regulator_off_init = true;
 	}
-	of_property_read_u32(np, "bus-width", &bus_width);
-	if (bus_width == 4)
-		pdata->caps |= MMC_CAP_4_BIT_DATA;
-	else if (bus_width == 8)
-		pdata->caps |= MMC_CAP_8_BIT_DATA;
 
 	if (of_find_property(np, "ti,needs-special-reset", NULL))
 		pdata->features |= HSMMC_HAS_UPDATED_RESET;
 
-	if (!of_property_read_u32(np, "max-frequency", &max_freq))
-		pdata->max_freq = max_freq;
-
 	if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
 		pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
 
-	if (of_find_property(np, "keep-power-in-suspend", NULL))
-		pdata->pm_caps |= MMC_PM_KEEP_POWER;
-
-	if (of_find_property(np, "enable-sdio-wakeup", NULL))
-		pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
-
 	return pdata;
 }
 #else
@@ -2078,6 +2008,10 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto err1;
+
 	host		= mmc_priv(mmc);
 	host->mmc	= mmc;
 	host->pdata	= pdata;
@@ -2091,7 +2025,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	host->next_data.cookie = 1;
 	host->pbias_enabled = 0;
 
-	ret = omap_hsmmc_gpio_init(host, pdata);
+	ret = omap_hsmmc_gpio_init(mmc, host, pdata);
 	if (ret)
 		goto err_gpio;
 
@@ -2106,7 +2040,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	if (pdata->max_freq > 0)
 		mmc->f_max = pdata->max_freq;
-	else
+	else if (mmc->f_max == 0)
 		mmc->f_max = OMAP_MMC_MAX_CLOCK;
 
 	spin_lock_init(&host->irq_lock);
@@ -2160,7 +2094,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	if (mmc_pdata(host)->nonremovable)
 		mmc->caps |= MMC_CAP_NONREMOVABLE;
 
-	mmc->pm_caps = mmc_pdata(host)->pm_caps;
+	mmc->pm_caps |= mmc_pdata(host)->pm_caps;
 
 	omap_hsmmc_conf_bus_power(host);
 
@@ -2222,22 +2156,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	mmc->ocr_avail = mmc_pdata(host)->ocr_mask;
 
-	/* Request IRQ for card detect */
-	if (host->card_detect_irq) {
-		ret = devm_request_threaded_irq(&pdev->dev,
-						host->card_detect_irq,
-						NULL, omap_hsmmc_detect,
-					   IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-					   mmc_hostname(mmc), host);
-		if (ret) {
-			dev_err(mmc_dev(host->mmc),
-				"Unable to grab MMC CD IRQ\n");
-			goto err_irq_cd;
-		}
-		host->suspend = omap_hsmmc_suspend_cdirq;
-		host->resume = omap_hsmmc_resume_cdirq;
-	}
-
 	omap_hsmmc_disable_irq(host);
 
 	/*
@@ -2276,7 +2194,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 err_slot_name:
 	mmc_remove_host(mmc);
-err_irq_cd:
 	if (host->use_reg)
 		omap_hsmmc_reg_put(host);
 err_irq:
@@ -2289,7 +2206,6 @@ err_irq:
 	if (host->dbclk)
 		clk_disable_unprepare(host->dbclk);
 err1:
-	omap_hsmmc_gpio_free(host, pdata);
 err_gpio:
 	mmc_free_host(mmc);
 err:
@@ -2315,32 +2231,12 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
 	if (host->dbclk)
 		clk_disable_unprepare(host->dbclk);
 
-	omap_hsmmc_gpio_free(host, host->pdata);
 	mmc_free_host(host->mmc);
 
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int omap_hsmmc_prepare(struct device *dev)
-{
-	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-
-	if (host->suspend)
-		return host->suspend(dev);
-
-	return 0;
-}
-
-static void omap_hsmmc_complete(struct device *dev)
-{
-	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-
-	if (host->resume)
-		host->resume(dev);
-
-}
-
 static int omap_hsmmc_suspend(struct device *dev)
 {
 	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
@@ -2398,8 +2294,6 @@ static int omap_hsmmc_resume(struct device *dev)
 }
 
 #else
-#define omap_hsmmc_prepare	NULL
-#define omap_hsmmc_complete	NULL
 #define omap_hsmmc_suspend	NULL
 #define omap_hsmmc_resume	NULL
 #endif
@@ -2484,8 +2378,6 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
 static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
 	.suspend	= omap_hsmmc_suspend,
 	.resume		= omap_hsmmc_resume,
-	.prepare	= omap_hsmmc_prepare,
-	.complete	= omap_hsmmc_complete,
 	.runtime_suspend = omap_hsmmc_runtime_suspend,
 	.runtime_resume = omap_hsmmc_runtime_resume,
 };

drivers/mmc/host/rtsx_pci_sdmmc.c

@@ -28,6 +28,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
+#include <linux/mmc/sdio.h>
 #include <linux/mmc/card.h>
 #include <linux/mfd/rtsx_pci.h>
 #include <asm/unaligned.h>
@@ -53,9 +54,9 @@ struct realtek_pci_sdmmc {
 #define SDMMC_POWER_ON		1
 #define SDMMC_POWER_OFF		0
 
-	unsigned int		sg_count;
+	int			sg_count;
 	s32			cookie;
-	unsigned int		cookie_sg_count;
+	int			cookie_sg_count;
 	bool			using_cookie;
 };
 
@@ -71,30 +72,83 @@ static inline void sd_clear_error(struct realtek_pci_sdmmc *host)
 }
 
 #ifdef DEBUG
-static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
+static void dump_reg_range(struct realtek_pci_sdmmc *host, u16 start, u16 end)
 {
-	struct rtsx_pcr *pcr = host->pcr;
-	u16 i;
-	u8 *ptr;
+	u16 len = end - start + 1;
+	int i;
+	u8 data[8];
+
+	for (i = 0; i < len; i += 8) {
+		int j;
+		int n = min(8, len - i);
+
+		memset(&data, 0, sizeof(data));
+		for (j = 0; j < n; j++)
+			rtsx_pci_read_register(host->pcr, start + i + j,
+				data + j);
+		dev_dbg(sdmmc_dev(host), "0x%04X(%d): %8ph\n",
+			start + i, n, data);
+	}
+}
 
-	/* Print SD host internal registers */
-	rtsx_pci_init_cmd(pcr);
-	for (i = 0xFDA0; i <= 0xFDAE; i++)
-		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
-	for (i = 0xFD52; i <= 0xFD69; i++)
-		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
-	rtsx_pci_send_cmd(pcr, 100);
-
-	ptr = rtsx_pci_get_cmd_data(pcr);
-	for (i = 0xFDA0; i <= 0xFDAE; i++)
-		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
-	for (i = 0xFD52; i <= 0xFD69; i++)
-		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
+{
+	dump_reg_range(host, 0xFDA0, 0xFDB3);
+	dump_reg_range(host, 0xFD52, 0xFD69);
 }
 #else
 #define sd_print_debug_regs(host)
 #endif /* DEBUG */
 
+static inline int sd_get_cd_int(struct realtek_pci_sdmmc *host)
+{
+	return rtsx_pci_readl(host->pcr, RTSX_BIPR) & SD_EXIST;
+}
+
+static void sd_cmd_set_sd_cmd(struct rtsx_pcr *pcr, struct mmc_command *cmd)
+{
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF,
+		SD_CMD_START | cmd->opcode);
+	rtsx_pci_write_be32(pcr, SD_CMD1, cmd->arg);
+}
+
+static void sd_cmd_set_data_len(struct rtsx_pcr *pcr, u16 blocks, u16 blksz)
+{
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, blocks);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, blocks >> 8);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, blksz);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, blksz >> 8);
+}
+
+static int sd_response_type(struct mmc_command *cmd)
+{
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		return SD_RSP_TYPE_R0;
+	case MMC_RSP_R1:
+		return SD_RSP_TYPE_R1;
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		return SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
+	case MMC_RSP_R1B:
+		return SD_RSP_TYPE_R1b;
+	case MMC_RSP_R2:
+		return SD_RSP_TYPE_R2;
+	case MMC_RSP_R3:
+		return SD_RSP_TYPE_R3;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sd_status_index(int resp_type)
+{
+	if (resp_type == SD_RSP_TYPE_R0)
+		return 0;
+	else if (resp_type == SD_RSP_TYPE_R2)
+		return 16;
+
+	return 5;
+}
 /*
  * sd_pre_dma_transfer - do dma_map_sg() or using cookie
  *
@@ -166,123 +220,6 @@ static void sdmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
 	data->host_cookie = 0;
 }
 
-static int sd_read_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
-		u8 *buf, int buf_len, int timeout)
-{
-	struct rtsx_pcr *pcr = host->pcr;
-	int err, i;
-	u8 trans_mode;
-
-	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__, cmd[0] - 0x40);
-
-	if (!buf)
-		buf_len = 0;
-
-	if ((cmd[0] & 0x3F) == MMC_SEND_TUNING_BLOCK)
-		trans_mode = SD_TM_AUTO_TUNING;
-	else
-		trans_mode = SD_TM_NORMAL_READ;
-
-	rtsx_pci_init_cmd(pcr);
-
-	for (i = 0; i < 5; i++)
-		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0 + i, 0xFF, cmd[i]);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H,
-			0xFF, (u8)(byte_cnt >> 8));
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
-			SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
-			SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
-	if (trans_mode != SD_TM_AUTO_TUNING)
-		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
-				CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER,
-			0xFF, trans_mode | SD_TRANSFER_START);
-	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
-			SD_TRANSFER_END, SD_TRANSFER_END);
-
-	err = rtsx_pci_send_cmd(pcr, timeout);
-	if (err < 0) {
-		sd_print_debug_regs(host);
-		dev_dbg(sdmmc_dev(host),
-			"rtsx_pci_send_cmd fail (err = %d)\n", err);
-		return err;
-	}
-
-	if (buf && buf_len) {
-		err = rtsx_pci_read_ppbuf(pcr, buf, buf_len);
-		if (err < 0) {
-			dev_dbg(sdmmc_dev(host),
-				"rtsx_pci_read_ppbuf fail (err = %d)\n", err);
-			return err;
-		}
-	}
-
-	return 0;
-}
-
-static int sd_write_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
-		u8 *buf, int buf_len, int timeout)
-{
-	struct rtsx_pcr *pcr = host->pcr;
-	int err, i;
-	u8 trans_mode;
-
-	if (!buf)
-		buf_len = 0;
-
-	if (buf && buf_len) {
-		err = rtsx_pci_write_ppbuf(pcr, buf, buf_len);
-		if (err < 0) {
-			dev_dbg(sdmmc_dev(host),
-				"rtsx_pci_write_ppbuf fail (err = %d)\n", err);
-			return err;
-		}
-	}
-
-	trans_mode = cmd ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3;
-	rtsx_pci_init_cmd(pcr);
-
-	if (cmd) {
-		dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d\n", __func__,
-				cmd[0] - 0x40);
-
-		for (i = 0; i < 5; i++)
-			rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
-					SD_CMD0 + i, 0xFF, cmd[i]);
-	}
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H,
-			0xFF, (u8)(byte_cnt >> 8));
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
-		SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
-		SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
-			trans_mode | SD_TRANSFER_START);
-	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
-			SD_TRANSFER_END, SD_TRANSFER_END);
-
-	err = rtsx_pci_send_cmd(pcr, timeout);
-	if (err < 0) {
-		sd_print_debug_regs(host);
-		dev_dbg(sdmmc_dev(host),
-			"rtsx_pci_send_cmd fail (err = %d)\n", err);
-		return err;
-	}
-
-	return 0;
-}
-
 static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 		struct mmc_command *cmd)
 {
@@ -293,47 +230,18 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 	int timeout = 100;
 	int i;
 	u8 *ptr;
-	int stat_idx = 0;
-	u8 rsp_type;
-	int rsp_len = 5;
+	int rsp_type;
+	int stat_idx;
 	bool clock_toggled = false;
 
 	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
 			__func__, cmd_idx, arg);
 
-	/* Response type:
-	 * R0
-	 * R1, R5, R6, R7
-	 * R1b
-	 * R2
-	 * R3, R4
-	 */
-	switch (mmc_resp_type(cmd)) {
-	case MMC_RSP_NONE:
-		rsp_type = SD_RSP_TYPE_R0;
-		rsp_len = 0;
-		break;
-	case MMC_RSP_R1:
-		rsp_type = SD_RSP_TYPE_R1;
-		break;
-	case MMC_RSP_R1 & ~MMC_RSP_CRC:
-		rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
-		break;
-	case MMC_RSP_R1B:
-		rsp_type = SD_RSP_TYPE_R1b;
-		break;
-	case MMC_RSP_R2:
-		rsp_type = SD_RSP_TYPE_R2;
-		rsp_len = 16;
-		break;
-	case MMC_RSP_R3:
-		rsp_type = SD_RSP_TYPE_R3;
-		break;
-	default:
-		dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n");
-		err = -EINVAL;
+	rsp_type = sd_response_type(cmd);
+	if (rsp_type < 0)
 		goto out;
-	}
+
+	stat_idx = sd_status_index(rsp_type);
 
 	if (rsp_type == SD_RSP_TYPE_R1b)
 		timeout = 3000;
@@ -348,13 +256,7 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 	}
 
 	rtsx_pci_init_cmd(pcr);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24));
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16));
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8));
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg);
-
+	sd_cmd_set_sd_cmd(pcr, cmd);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
 			0x01, PINGPONG_BUFFER);
@@ -368,12 +270,10 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 		/* Read data from ping-pong buffer */
 		for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
 			rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
-		stat_idx = 16;
 	} else if (rsp_type != SD_RSP_TYPE_R0) {
 		/* Read data from SD_CMDx registers */
 		for (i = SD_CMD0; i <= SD_CMD4; i++)
 			rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
-		stat_idx = 5;
 	}
 
 	rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0);
@@ -438,71 +338,213 @@ out:
 				SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
 }
 
-static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
+static int sd_read_data(struct realtek_pci_sdmmc *host, struct mmc_command *cmd,
+	u16 byte_cnt, u8 *buf, int buf_len, int timeout)
+{
+	struct rtsx_pcr *pcr = host->pcr;
+	int err;
+	u8 trans_mode;
+
+	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
+		__func__, cmd->opcode, cmd->arg);
+
+	if (!buf)
+		buf_len = 0;
+
+	if (cmd->opcode == MMC_SEND_TUNING_BLOCK)
+		trans_mode = SD_TM_AUTO_TUNING;
+	else
+		trans_mode = SD_TM_NORMAL_READ;
+
+	rtsx_pci_init_cmd(pcr);
+	sd_cmd_set_sd_cmd(pcr, cmd);
+	sd_cmd_set_data_len(pcr, 1, byte_cnt);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+			SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+			SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
+	if (trans_mode != SD_TM_AUTO_TUNING)
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+				CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER,
+			0xFF, trans_mode | SD_TRANSFER_START);
+	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
+			SD_TRANSFER_END, SD_TRANSFER_END);
+
+	err = rtsx_pci_send_cmd(pcr, timeout);
+	if (err < 0) {
+		sd_print_debug_regs(host);
+		dev_dbg(sdmmc_dev(host),
+			"rtsx_pci_send_cmd fail (err = %d)\n", err);
+		return err;
+	}
+
+	if (buf && buf_len) {
+		err = rtsx_pci_read_ppbuf(pcr, buf, buf_len);
+		if (err < 0) {
+			dev_dbg(sdmmc_dev(host),
+				"rtsx_pci_read_ppbuf fail (err = %d)\n", err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int sd_write_data(struct realtek_pci_sdmmc *host,
+	struct mmc_command *cmd, u16 byte_cnt, u8 *buf, int buf_len,
+	int timeout)
+{
+	struct rtsx_pcr *pcr = host->pcr;
+	int err;
+
+	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
+		__func__, cmd->opcode, cmd->arg);
+
+	if (!buf)
+		buf_len = 0;
+
+	sd_send_cmd_get_rsp(host, cmd);
+	if (cmd->error)
+		return cmd->error;
+
+	if (buf && buf_len) {
+		err = rtsx_pci_write_ppbuf(pcr, buf, buf_len);
+		if (err < 0) {
+			dev_dbg(sdmmc_dev(host),
+				"rtsx_pci_write_ppbuf fail (err = %d)\n", err);
+			return err;
+		}
+	}
+
+	rtsx_pci_init_cmd(pcr);
+	sd_cmd_set_data_len(pcr, 1, byte_cnt);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+		SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+		SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+			SD_TRANSFER_START | SD_TM_AUTO_WRITE_3);
+	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
+			SD_TRANSFER_END, SD_TRANSFER_END);
+
+	err = rtsx_pci_send_cmd(pcr, timeout);
+	if (err < 0) {
+		sd_print_debug_regs(host);
+		dev_dbg(sdmmc_dev(host),
+			"rtsx_pci_send_cmd fail (err = %d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int sd_read_long_data(struct realtek_pci_sdmmc *host,
+	struct mmc_request *mrq)
 {
 	struct rtsx_pcr *pcr = host->pcr;
 	struct mmc_host *mmc = host->mmc;
 	struct mmc_card *card = mmc->card;
+	struct mmc_command *cmd = mrq->cmd;
 	struct mmc_data *data = mrq->data;
 	int uhs = mmc_card_uhs(card);
-	int read = (data->flags & MMC_DATA_READ) ? 1 : 0;
-	u8 cfg2, trans_mode;
+	u8 cfg2 = 0;
 	int err;
+	int resp_type;
 	size_t data_len = data->blksz * data->blocks;
 
-	if (read) {
-		cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
-			SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0;
-		trans_mode = SD_TM_AUTO_READ_3;
-	} else {
-		cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 |
-			SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0;
-		trans_mode = SD_TM_AUTO_WRITE_3;
-	}
+	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
+		__func__, cmd->opcode, cmd->arg);
+
+	resp_type = sd_response_type(cmd);
+	if (resp_type < 0)
+		return resp_type;
 
 	if (!uhs)
 		cfg2 |= SD_NO_CHECK_WAIT_CRC_TO;
 
 	rtsx_pci_init_cmd(pcr);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L,
-			0xFF, (u8)data->blocks);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H,
-			0xFF, (u8)(data->blocks >> 8));
-
+	sd_cmd_set_sd_cmd(pcr, cmd);
+	sd_cmd_set_data_len(pcr, data->blocks, data->blksz);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0,
 			DMA_DONE_INT, DMA_DONE_INT);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC3,
-			0xFF, (u8)(data_len >> 24));
+		0xFF, (u8)(data_len >> 24));
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC2,
-			0xFF, (u8)(data_len >> 16));
+		0xFF, (u8)(data_len >> 16));
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC1,
-			0xFF, (u8)(data_len >> 8));
+		0xFF, (u8)(data_len >> 8));
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC0, 0xFF, (u8)data_len);
-	if (read) {
-		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
-				0x03 | DMA_PACK_SIZE_MASK,
-				DMA_DIR_FROM_CARD | DMA_EN | DMA_512);
-	} else {
-		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
-				0x03 | DMA_PACK_SIZE_MASK,
-				DMA_DIR_TO_CARD | DMA_EN | DMA_512);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
+		0x03 | DMA_PACK_SIZE_MASK,
+		DMA_DIR_FROM_CARD | DMA_EN | DMA_512);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+			0x01, RING_BUFFER);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2 | resp_type);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+			SD_TRANSFER_START | SD_TM_AUTO_READ_2);
+	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
+			SD_TRANSFER_END, SD_TRANSFER_END);
+	rtsx_pci_send_cmd_no_wait(pcr);
+
+	err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, 1, 10000);
+	if (err < 0) {
+		sd_print_debug_regs(host);
+		sd_clear_error(host);
+		return err;
 	}
 
+	return 0;
+}
+
+static int sd_write_long_data(struct realtek_pci_sdmmc *host,
+	struct mmc_request *mrq)
+{
+	struct rtsx_pcr *pcr = host->pcr;
+	struct mmc_host *mmc = host->mmc;
+	struct mmc_card *card = mmc->card;
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_data *data = mrq->data;
+	int uhs = mmc_card_uhs(card);
+	u8 cfg2;
+	int err;
+	size_t data_len = data->blksz * data->blocks;
+
+	sd_send_cmd_get_rsp(host, cmd);
+	if (cmd->error)
+		return cmd->error;
+
+	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
+		__func__, cmd->opcode, cmd->arg);
+
+	cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+		SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0;
+
+	if (!uhs)
+		cfg2 |= SD_NO_CHECK_WAIT_CRC_TO;
+
+	rtsx_pci_init_cmd(pcr);
+	sd_cmd_set_data_len(pcr, data->blocks, data->blksz);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, IRQSTAT0,
+			DMA_DONE_INT, DMA_DONE_INT);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC3,
+		0xFF, (u8)(data_len >> 24));
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC2,
+		0xFF, (u8)(data_len >> 16));
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC1,
+		0xFF, (u8)(data_len >> 8));
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMATC0, 0xFF, (u8)data_len);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, DMACTL,
+		0x03 | DMA_PACK_SIZE_MASK,
+		DMA_DIR_TO_CARD | DMA_EN | DMA_512);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
 			0x01, RING_BUFFER);
-
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
-			trans_mode | SD_TRANSFER_START);
+			SD_TRANSFER_START | SD_TM_AUTO_WRITE_3);
 	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
 			SD_TRANSFER_END, SD_TRANSFER_END);
-
 	rtsx_pci_send_cmd_no_wait(pcr);
-
-	err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read, 10000);
+	err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, 0, 10000);
 	if (err < 0) {
 		sd_clear_error(host);
 		return err;
@@ -511,6 +553,23 @@ static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
 	return 0;
 }
 
+static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
+{
+	struct mmc_data *data = mrq->data;
+
+	if (host->sg_count < 0) {
+		data->error = host->sg_count;
+		dev_dbg(sdmmc_dev(host), "%s: sg_count = %d is invalid\n",
+			__func__, host->sg_count);
+		return data->error;
+	}
+
+	if (data->flags & MMC_DATA_READ)
+		return sd_read_long_data(host, mrq);
+
+	return sd_write_long_data(host, mrq);
+}
+
 static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
 {
 	rtsx_pci_write_register(host->pcr, SD_CFG1,
@@ -528,10 +587,7 @@ static void sd_normal_rw(struct realtek_pci_sdmmc *host,
 {
 	struct mmc_command *cmd = mrq->cmd;
 	struct mmc_data *data = mrq->data;
-	u8 _cmd[5], *buf;
-
-	_cmd[0] = 0x40 | (u8)cmd->opcode;
-	put_unaligned_be32(cmd->arg, (u32 *)(&_cmd[1]));
+	u8 *buf;
 
 	buf = kzalloc(data->blksz, GFP_NOIO);
 	if (!buf) {
@@ -543,7 +599,7 @@ static void sd_normal_rw(struct realtek_pci_sdmmc *host,
 		if (host->initial_mode)
 			sd_disable_initial_mode(host);
 
-		cmd->error = sd_read_data(host, _cmd, (u16)data->blksz, buf,
+		cmd->error = sd_read_data(host, cmd, (u16)data->blksz, buf,
 				data->blksz, 200);
 
 		if (host->initial_mode)
@@ -553,7 +609,7 @@ static void sd_normal_rw(struct realtek_pci_sdmmc *host,
 	} else {
 		sg_copy_to_buffer(data->sg, data->sg_len, buf, data->blksz);
 
-		cmd->error = sd_write_data(host, _cmd, (u16)data->blksz, buf,
+		cmd->error = sd_write_data(host, cmd, (u16)data->blksz, buf,
 				data->blksz, 200);
 	}
 
@@ -653,14 +709,14 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
 		u8 opcode, u8 sample_point)
 {
 	int err;
-	u8 cmd[5] = {0};
+	struct mmc_command cmd = {0};
 
 	err = sd_change_phase(host, sample_point, true);
 	if (err < 0)
 		return err;
 
-	cmd[0] = 0x40 | opcode;
-	err = sd_read_data(host, cmd, 0x40, NULL, 0, 100);
+	cmd.opcode = opcode;
+	err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100);
 	if (err < 0) {
 		/* Wait till SD DATA IDLE */
 		sd_wait_data_idle(host);
@@ -727,6 +783,12 @@ static int sd_tuning_rx(struct realtek_pci_sdmmc *host, u8 opcode)
 	return 0;
 }
 
+static inline int sdio_extblock_cmd(struct mmc_command *cmd,
+	struct mmc_data *data)
+{
+	return (cmd->opcode == SD_IO_RW_EXTENDED) && (data->blksz == 512);
+}
+
 static inline int sd_rw_cmd(struct mmc_command *cmd)
 {
 	return mmc_op_multi(cmd->opcode) ||
@@ -748,7 +810,7 @@ static void sd_request(struct work_struct *work)
 	unsigned int data_size = 0;
 	int err;
 
-	if (host->eject) {
+	if (host->eject || !sd_get_cd_int(host)) {
 		cmd->error = -ENOMEDIUM;
 		goto finish;
 	}
@@ -776,17 +838,15 @@ static void sd_request(struct work_struct *work)
 	if (mrq->data)
 		data_size = data->blocks * data->blksz;
 
-	if (!data_size || sd_rw_cmd(cmd)) {
+	if (!data_size) {
 		sd_send_cmd_get_rsp(host, cmd);
+	} else if (sd_rw_cmd(cmd) || sdio_extblock_cmd(cmd, data)) {
+		cmd->error = sd_rw_multi(host, mrq);
+		if (!host->using_cookie)
+			sdmmc_post_req(host->mmc, host->mrq, 0);
 
-		if (!cmd->error && data_size) {
-			sd_rw_multi(host, mrq);
-			if (!host->using_cookie)
-				sdmmc_post_req(host->mmc, host->mrq, 0);
-
-			if (mmc_op_multi(cmd->opcode) && mrq->stop)
-				sd_send_cmd_get_rsp(host, mrq->stop);
-		}
+		if (mmc_op_multi(cmd->opcode) && mrq->stop)
+			sd_send_cmd_get_rsp(host, mrq->stop);
 	} else {
 		sd_normal_rw(host, mrq);
 	}
@@ -801,8 +861,10 @@ static void sd_request(struct work_struct *work)
 	mutex_unlock(&pcr->pcr_mutex);
 
 finish:
-	if (cmd->error)
-		dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error);
+	if (cmd->error) {
+		dev_dbg(sdmmc_dev(host), "CMD %d 0x%08x error(%d)\n",
+			cmd->opcode, cmd->arg, cmd->error);
+	}
 
 	mutex_lock(&host->host_mutex);
 	host->mrq = NULL;
@@ -820,7 +882,7 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	host->mrq = mrq;
 	mutex_unlock(&host->host_mutex);
 
-	if (sd_rw_cmd(mrq->cmd))
+	if (sd_rw_cmd(mrq->cmd) || sdio_extblock_cmd(mrq->cmd, data))
 		host->using_cookie = sd_pre_dma_transfer(host, data, false);
 
 	queue_work(host->workq, &host->work);
@@ -1066,7 +1128,7 @@ static int sdmmc_get_cd(struct mmc_host *mmc)
 	u32 val;
 
 	if (host->eject)
-		return -ENOMEDIUM;
+		return cd;
 
 	mutex_lock(&pcr->pcr_mutex);
 
@@ -1317,6 +1379,7 @@ static void rtsx_pci_sdmmc_card_event(struct platform_device *pdev)
 {
 	struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
 
+	host->cookie = -1;
 	mmc_detect_change(host->mmc, 0);
 }
 
@@ -1349,6 +1412,7 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
 	host->pcr = pcr;
 	host->mmc = mmc;
 	host->pdev = pdev;
+	host->cookie = -1;
 	host->power_state = SDMMC_POWER_OFF;
 	INIT_WORK(&host->work, sd_request);
 	platform_set_drvdata(pdev, host);

drivers/mmc/host/sdhci-acpi.c

@@ -158,7 +158,7 @@ static int sdhci_acpi_emmc_probe_slot(struct platform_device *pdev,
 
 	host = c->host;
 
-	/* Platform specific code during emmc proble slot goes here */
+	/* Platform specific code during emmc probe slot goes here */
 
 	if (hid && uid && !strcmp(hid, "80860F14") && !strcmp(uid, "1") &&
 	    sdhci_readl(host, SDHCI_CAPABILITIES) == 0x446cc8b2 &&
@@ -179,7 +179,7 @@ static int sdhci_acpi_sdio_probe_slot(struct platform_device *pdev,
 
 	host = c->host;
 
-	/* Platform specific code during emmc proble slot goes here */
+	/* Platform specific code during sdio probe slot goes here */
 
 	return 0;
 }
@@ -195,7 +195,7 @@ static int sdhci_acpi_sd_probe_slot(struct platform_device *pdev,
 
 	host = c->host;
 
-	/* Platform specific code during emmc proble slot goes here */
+	/* Platform specific code during sd probe slot goes here */
 
 	return 0;
 }
@@ -448,18 +448,13 @@ static int sdhci_acpi_runtime_resume(struct device *dev)
 	return sdhci_runtime_resume_host(c->host);
 }
 
-static int sdhci_acpi_runtime_idle(struct device *dev)
-{
-	return 0;
-}
-
 #endif
 
 static const struct dev_pm_ops sdhci_acpi_pm_ops = {
 	.suspend		= sdhci_acpi_suspend,
 	.resume			= sdhci_acpi_resume,
 	SET_RUNTIME_PM_OPS(sdhci_acpi_runtime_suspend,
-			sdhci_acpi_runtime_resume, sdhci_acpi_runtime_idle)
+			sdhci_acpi_runtime_resume, NULL)
 };
 
 static struct platform_driver sdhci_acpi_driver = {

drivers/mmc/host/sdhci-bcm-kona.c

@@ -254,7 +254,9 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
 	kona_dev = sdhci_pltfm_priv(pltfm_priv);
 	mutex_init(&kona_dev->write_lock);
 
-	mmc_of_parse(host->mmc);
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_pltfm_free;
 
 	if (!host->mmc->f_max) {
 		dev_err(&pdev->dev, "Missing max-freq for SDHCI cfg\n");

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -1080,10 +1080,10 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		goto disable_clk;
 
 	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_suspend_ignore_children(&pdev->dev, 1);
+	pm_runtime_enable(&pdev->dev);
 
 	return 0;
 
@@ -1103,16 +1103,15 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
 
-	sdhci_remove_host(host, dead);
-
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
 
-	if (!IS_ENABLED(CONFIG_PM)) {
-		clk_disable_unprepare(imx_data->clk_per);
-		clk_disable_unprepare(imx_data->clk_ipg);
-		clk_disable_unprepare(imx_data->clk_ahb);
-	}
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(imx_data->clk_per);
+	clk_disable_unprepare(imx_data->clk_ipg);
+	clk_disable_unprepare(imx_data->clk_ahb);
 
 	sdhci_pltfm_free(pdev);
 

drivers/mmc/host/sdhci-of-esdhc.c

@@ -276,6 +276,14 @@ static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
 			ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
 }
 
+static void esdhc_reset(struct sdhci_host *host, u8 mask)
+{
+	sdhci_reset(host, mask);
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
 static const struct sdhci_ops sdhci_esdhc_ops = {
 	.read_l = esdhc_readl,
 	.read_w = esdhc_readw,
@@ -290,7 +298,7 @@ static const struct sdhci_ops sdhci_esdhc_ops = {
 	.platform_init = esdhc_of_platform_init,
 	.adma_workaround = esdhci_of_adma_workaround,
 	.set_bus_width = esdhc_pltfm_set_bus_width,
-	.reset = sdhci_reset,
+	.reset = esdhc_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
@@ -362,13 +370,19 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	}
 
 	/* call to generic mmc_of_parse to support additional capabilities */
-	mmc_of_parse(host->mmc);
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err;
+
 	mmc_of_parse_voltage(np, &host->ocr_mask);
 
 	ret = sdhci_add_host(host);
 	if (ret)
-		sdhci_pltfm_free(pdev);
+		goto err;
 
+	return 0;
+ err:
+	sdhci_pltfm_free(pdev);
 	return ret;
 }
 

drivers/mmc/host/sdhci-pci.c

@@ -1367,11 +1367,6 @@ static int sdhci_pci_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static int sdhci_pci_runtime_idle(struct device *dev)
-{
-	return 0;
-}
-
 #else /* CONFIG_PM */
 
 #define sdhci_pci_suspend NULL
@@ -1383,7 +1378,7 @@ static const struct dev_pm_ops sdhci_pci_pm_ops = {
 	.suspend = sdhci_pci_suspend,
 	.resume = sdhci_pci_resume,
 	SET_RUNTIME_PM_OPS(sdhci_pci_runtime_suspend,
-			sdhci_pci_runtime_resume, sdhci_pci_runtime_idle)
+			sdhci_pci_runtime_resume, NULL)
 };
 
 /*****************************************************************************\

drivers/mmc/host/sdhci-pxav3.c

@@ -62,6 +62,7 @@ struct sdhci_pxa {
 	struct clk *clk_core;
 	struct clk *clk_io;
 	u8	power_mode;
+	void __iomem *sdio3_conf_reg;
 };
 
 /*
@@ -72,6 +73,14 @@ struct sdhci_pxa {
 #define SDHCI_WINDOW_BASE(i)	(0x84 + ((i) << 3))
 #define SDHCI_MAX_WIN_NUM	8
 
+/*
+ * Fields below belong to SDIO3 Configuration Register (third register
+ * region for the Armada 38x flavor)
+ */
+
+#define SDIO3_CONF_CLK_INV	BIT(0)
+#define SDIO3_CONF_SD_FB_CLK	BIT(2)
+
 static int mv_conf_mbus_windows(struct platform_device *pdev,
 				const struct mbus_dram_target_info *dram)
 {
@@ -118,6 +127,51 @@ static int mv_conf_mbus_windows(struct platform_device *pdev,
 	return 0;
 }
 
+static int armada_38x_quirks(struct platform_device *pdev,
+			     struct sdhci_host *host)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
+	struct resource *res;
+
+	host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "conf-sdio3");
+	if (res) {
+		pxa->sdio3_conf_reg = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(pxa->sdio3_conf_reg))
+			return PTR_ERR(pxa->sdio3_conf_reg);
+	} else {
+		/*
+		 * According to erratum 'FE-2946959' both SDR50 and DDR50
+		 * modes require specific clock adjustments in SDIO3
+		 * Configuration register, if the adjustment is not done,
+		 * remove them from the capabilities.
+		 */
+		host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+		host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);
+
+		dev_warn(&pdev->dev, "conf-sdio3 register not found: disabling SDR50 and DDR50 modes.\nConsider updating your dtb\n");
+	}
+
+	/*
+	 * According to erratum 'ERR-7878951' Armada 38x SDHCI
+	 * controller has different capabilities than the ones shown
+	 * in its registers
+	 */
+	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	if (of_property_read_bool(np, "no-1-8-v")) {
+		host->caps &= ~SDHCI_CAN_VDD_180;
+		host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
+	} else {
+		host->caps &= ~SDHCI_CAN_VDD_330;
+	}
+	host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING);
+
+	return 0;
+}
+
 static void pxav3_reset(struct sdhci_host *host, u8 mask)
 {
 	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
@@ -194,6 +248,8 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
 
 static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
 	u16 ctrl_2;
 
 	/*
@@ -223,6 +279,24 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 		break;
 	}
 
+	/*
+	 * Update SDIO3 Configuration register according to erratum
+	 * FE-2946959
+	 */
+	if (pxa->sdio3_conf_reg) {
+		u8 reg_val  = readb(pxa->sdio3_conf_reg);
+
+		if (uhs == MMC_TIMING_UHS_SDR50 ||
+		    uhs == MMC_TIMING_UHS_DDR50) {
+			reg_val &= ~SDIO3_CONF_CLK_INV;
+			reg_val |= SDIO3_CONF_SD_FB_CLK;
+		} else {
+			reg_val |= SDIO3_CONF_CLK_INV;
+			reg_val &= ~SDIO3_CONF_SD_FB_CLK;
+		}
+		writeb(reg_val, pxa->sdio3_conf_reg);
+	}
+
 	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
 	dev_dbg(mmc_dev(host->mmc),
 		"%s uhs = %d, ctrl_2 = %04X\n",
@@ -268,8 +342,8 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
 	if (!pdata)
 		return NULL;
 
-	of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
-	if (clk_delay_cycles > 0)
+	if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
+				  &clk_delay_cycles))
 		pdata->clk_delay_cycles = clk_delay_cycles;
 
 	return pdata;
@@ -318,15 +392,18 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	if (!IS_ERR(pxa->clk_core))
 		clk_prepare_enable(pxa->clk_core);
 
+	/* enable 1/8V DDR capable */
+	host->mmc->caps |= MMC_CAP_1_8V_DDR;
+
 	if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
+		ret = armada_38x_quirks(pdev, host);
+		if (ret < 0)
+			goto err_clk_get;
 		ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
 		if (ret < 0)
 			goto err_mbus_win;
 	}
 
-	/* enable 1/8V DDR capable */
-	host->mmc->caps |= MMC_CAP_1_8V_DDR;
-
 	match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
 	if (match) {
 		ret = mmc_of_parse(host->mmc);
@@ -365,10 +442,11 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 		}
 	}
 
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
 	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
 	pm_suspend_ignore_children(&pdev->dev, 1);
 
 	ret = sdhci_add_host(host);
@@ -391,14 +469,13 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_host:
-	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
 err_of_parse:
 err_cd_req:
 err_mbus_win:
 	clk_disable_unprepare(pxa->clk_io);
-	if (!IS_ERR(pxa->clk_core))
-		clk_disable_unprepare(pxa->clk_core);
+	clk_disable_unprepare(pxa->clk_core);
 err_clk_get:
 	sdhci_pltfm_free(pdev);
 	return ret;
@@ -411,12 +488,13 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
 	struct sdhci_pxa *pxa = pltfm_host->priv;
 
 	pm_runtime_get_sync(&pdev->dev);
-	sdhci_remove_host(host, 1);
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	sdhci_remove_host(host, 1);
 
 	clk_disable_unprepare(pxa->clk_io);
-	if (!IS_ERR(pxa->clk_core))
-		clk_disable_unprepare(pxa->clk_core);
+	clk_disable_unprepare(pxa->clk_core);
 
 	sdhci_pltfm_free(pdev);
 
@@ -457,11 +535,11 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_pxa *pxa = pltfm_host->priv;
-	unsigned long flags;
+	int ret;
 
-	spin_lock_irqsave(&host->lock, flags);
-	host->runtime_suspended = true;
-	spin_unlock_irqrestore(&host->lock, flags);
+	ret = sdhci_runtime_suspend_host(host);
+	if (ret)
+		return ret;
 
 	clk_disable_unprepare(pxa->clk_io);
 	if (!IS_ERR(pxa->clk_core))
@@ -475,17 +553,12 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_pxa *pxa = pltfm_host->priv;
-	unsigned long flags;
 
 	clk_prepare_enable(pxa->clk_io);
 	if (!IS_ERR(pxa->clk_core))
 		clk_prepare_enable(pxa->clk_core);
 
-	spin_lock_irqsave(&host->lock, flags);
-	host->runtime_suspended = false;
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	return 0;
+	return sdhci_runtime_resume_host(host);
 }
 #endif
 

drivers/mmc/host/sdhci-s3c.c

@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
@@ -312,7 +313,14 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	sdhci_s3c_set_clock(host, clock);
 
+	/* Reset SD Clock Enable */
+	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	clk &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	spin_unlock_irq(&host->lock);
 	ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+	spin_lock_irq(&host->lock);
 	if (ret != 0) {
 		dev_err(dev, "%s: failed to set clock rate %uHz\n",
 			mmc_hostname(host->mmc), clock);
@@ -607,7 +615,9 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_suspend_ignore_children(&pdev->dev, 1);
 
-	mmc_of_parse(host->mmc);
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_req_regs;
 
 	ret = sdhci_add_host(host);
 	if (ret) {

drivers/mmc/host/sdhci-sirf.c

@@ -15,7 +15,9 @@
 #include <linux/mmc/slot-gpio.h>
 #include "sdhci-pltfm.h"
 
+#define SDHCI_CLK_DELAY_SETTING 0x4C
 #define SDHCI_SIRF_8BITBUS BIT(3)
+#define SIRF_TUNING_COUNT 128
 
 struct sdhci_sirf_priv {
 	struct clk *clk;
@@ -49,7 +51,76 @@ static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width)
 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 }
 
+static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+	int tuning_seq_cnt = 3;
+	u8 phase, tuned_phases[SIRF_TUNING_COUNT];
+	u8 tuned_phase_cnt = 0;
+	int rc, longest_range = 0;
+	int start = -1, end = 0, tuning_value = -1, range = 0;
+	u16 clock_setting;
+	struct mmc_host *mmc = host->mmc;
+
+	clock_setting = sdhci_readw(host, SDHCI_CLK_DELAY_SETTING);
+	clock_setting &= ~0x3fff;
+
+retry:
+	phase = 0;
+	do {
+		sdhci_writel(host,
+			clock_setting | phase | (phase << 7) | (phase << 16),
+			SDHCI_CLK_DELAY_SETTING);
+
+		if (!mmc_send_tuning(mmc)) {
+			/* Tuning is successful at this tuning point */
+			tuned_phases[tuned_phase_cnt++] = phase;
+			dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
+				 mmc_hostname(mmc), phase);
+			if (start == -1)
+				start = phase;
+			end = phase;
+			range++;
+			if (phase == (SIRF_TUNING_COUNT - 1)
+				&& range > longest_range)
+				tuning_value = (start + end) / 2;
+		} else {
+			dev_dbg(mmc_dev(mmc), "%s: Found bad phase = %d\n",
+				 mmc_hostname(mmc), phase);
+			if (range > longest_range) {
+				tuning_value = (start + end) / 2;
+				longest_range = range;
+			}
+			start = -1;
+			end = range = 0;
+		}
+	} while (++phase < ARRAY_SIZE(tuned_phases));
+
+	if (tuned_phase_cnt && tuning_value > 0) {
+		/*
+		 * Finally set the selected phase in delay
+		 * line hw block.
+		 */
+		phase = tuning_value;
+		sdhci_writel(host,
+			clock_setting | phase | (phase << 7) | (phase << 16),
+			SDHCI_CLK_DELAY_SETTING);
+
+		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
+			 mmc_hostname(mmc), phase);
+	} else {
+		if (--tuning_seq_cnt)
+			goto retry;
+		/* Tuning failed */
+		dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
+		       mmc_hostname(mmc));
+		rc = -EIO;
+	}
+
+	return rc;
+}
+
 static struct sdhci_ops sdhci_sirf_ops = {
+	.platform_execute_tuning = sdhci_sirf_execute_tuning,
 	.set_clock = sdhci_set_clock,
 	.get_max_clock	= sdhci_sirf_get_max_clk,
 	.set_bus_width = sdhci_sirf_set_bus_width,
@@ -138,9 +209,6 @@ static int sdhci_sirf_remove(struct platform_device *pdev)
 
 	sdhci_pltfm_unregister(pdev);
 
-	if (gpio_is_valid(priv->gpio_cd))
-		mmc_gpio_free_cd(host->mmc);
-
 	clk_disable_unprepare(priv->clk);
 	return 0;
 }

drivers/mmc/host/sdhci-st.c

@@ -78,10 +78,9 @@ static int sdhci_st_probe(struct platform_device *pdev)
 	}
 
 	ret = mmc_of_parse(host->mmc);
-
 	if (ret) {
 		dev_err(&pdev->dev, "Failed mmc_of_parse\n");
-		return ret;
+		goto err_of;
 	}
 
 	clk_prepare_enable(clk);
@@ -108,6 +107,7 @@ static int sdhci_st_probe(struct platform_device *pdev)
 
 err_out:
 	clk_disable_unprepare(clk);
+err_of:
 	sdhci_pltfm_free(pdev);
 
 	return ret;

drivers/mmc/host/sdhci-tegra.c

@@ -41,6 +41,7 @@
 #define NVQUIRK_DISABLE_SDR50		BIT(3)
 #define NVQUIRK_DISABLE_SDR104		BIT(4)
 #define NVQUIRK_DISABLE_DDR50		BIT(5)
+#define NVQUIRK_SHADOW_XFER_MODE_REG	BIT(6)
 
 struct sdhci_tegra_soc_data {
 	const struct sdhci_pltfm_data *pdata;
@@ -67,6 +68,31 @@ static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
 	return readw(host->ioaddr + reg);
 }
 
+static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = pltfm_host->priv;
+	const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
+
+	if (soc_data->nvquirks & NVQUIRK_SHADOW_XFER_MODE_REG) {
+		switch (reg) {
+		case SDHCI_TRANSFER_MODE:
+			/*
+			 * Postpone this write, we must do it together with a
+			 * command write that is down below.
+			 */
+			pltfm_host->xfer_mode_shadow = val;
+			return;
+		case SDHCI_COMMAND:
+			writel((val << 16) | pltfm_host->xfer_mode_shadow,
+				host->ioaddr + SDHCI_TRANSFER_MODE);
+			return;
+		}
+	}
+
+	writew(val, host->ioaddr + reg);
+}
+
 static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -147,6 +173,7 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
 static const struct sdhci_ops tegra_sdhci_ops = {
 	.get_ro     = tegra_sdhci_get_ro,
 	.read_w     = tegra_sdhci_readw,
+	.write_w    = tegra_sdhci_writew,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = sdhci_set_clock,
 	.set_bus_width = tegra_sdhci_set_bus_width,
@@ -201,7 +228,8 @@ static struct sdhci_tegra_soc_data soc_data_tegra114 = {
 	.pdata = &sdhci_tegra114_pdata,
 	.nvquirks = NVQUIRK_DISABLE_SDR50 |
 		    NVQUIRK_DISABLE_DDR50 |
-		    NVQUIRK_DISABLE_SDR104,
+		    NVQUIRK_DISABLE_SDR104 |
+		    NVQUIRK_SHADOW_XFER_MODE_REG,
 };
 
 static const struct of_device_id sdhci_tegra_dt_match[] = {

drivers/mmc/host/sdhci.c

@@ -53,6 +53,9 @@ static void sdhci_finish_command(struct sdhci_host *);
 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 static void sdhci_tuning_timer(unsigned long data);
 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
+static int sdhci_pre_dma_transfer(struct sdhci_host *host,
+					struct mmc_data *data,
+					struct sdhci_host_next *next);
 
 #ifdef CONFIG_PM
 static int sdhci_runtime_pm_get(struct sdhci_host *host);
@@ -505,9 +508,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		goto fail;
 	BUG_ON(host->align_addr & host->align_mask);
 
-	host->sg_count = dma_map_sg(mmc_dev(host->mmc),
-		data->sg, data->sg_len, direction);
-	if (host->sg_count == 0)
+	host->sg_count = sdhci_pre_dma_transfer(host, data, NULL);
+	if (host->sg_count < 0)
 		goto unmap_align;
 
 	desc = host->adma_table;
@@ -531,8 +533,6 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		if (offset) {
 			if (data->flags & MMC_DATA_WRITE) {
 				buffer = sdhci_kmap_atomic(sg, &flags);
-				WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
-					(PAGE_SIZE - offset));
 				memcpy(align, buffer, offset);
 				sdhci_kunmap_atomic(buffer, &flags);
 			}
@@ -639,8 +639,6 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 				       (sg_dma_address(sg) & host->align_mask);
 
 				buffer = sdhci_kmap_atomic(sg, &flags);
-				WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
-					(PAGE_SIZE - size));
 				memcpy(buffer, align, size);
 				sdhci_kunmap_atomic(buffer, &flags);
 
@@ -649,8 +647,9 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 		}
 	}
 
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-		data->sg_len, direction);
+	if (!data->host_cookie)
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+			data->sg_len, direction);
 }
 
 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
@@ -846,11 +845,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 		} else {
 			int sg_cnt;
 
-			sg_cnt = dma_map_sg(mmc_dev(host->mmc),
-					data->sg, data->sg_len,
-					(data->flags & MMC_DATA_READ) ?
-						DMA_FROM_DEVICE :
-						DMA_TO_DEVICE);
+			sg_cnt = sdhci_pre_dma_transfer(host, data, NULL);
 			if (sg_cnt == 0) {
 				/*
 				 * This only happens when someone fed
@@ -909,7 +904,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 static void sdhci_set_transfer_mode(struct sdhci_host *host,
 	struct mmc_command *cmd)
 {
-	u16 mode;
+	u16 mode = 0;
 	struct mmc_data *data = cmd->data;
 
 	if (data == NULL) {
@@ -927,9 +922,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 
 	WARN_ON(!host->data);
 
-	mode = SDHCI_TRNS_BLK_CNT_EN;
+	if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE))
+		mode = SDHCI_TRNS_BLK_CNT_EN;
+
 	if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
-		mode |= SDHCI_TRNS_MULTI;
+		mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
 		/*
 		 * If we are sending CMD23, CMD12 never gets sent
 		 * on successful completion (so no Auto-CMD12).
@@ -963,8 +960,10 @@ static void sdhci_finish_data(struct sdhci_host *host)
 		if (host->flags & SDHCI_USE_ADMA)
 			sdhci_adma_table_post(host, data);
 		else {
-			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-				data->sg_len, (data->flags & MMC_DATA_READ) ?
+			if (!data->host_cookie)
+				dma_unmap_sg(mmc_dev(host->mmc),
+					data->sg, data->sg_len,
+					(data->flags & MMC_DATA_READ) ?
 					DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		}
 	}
@@ -1630,7 +1629,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	 * signalling timeout and CRC errors even on CMD0. Resetting
 	 * it on each ios seems to solve the problem.
 	 */
-	if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
+	if (host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
 		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
 
 	mmiowb();
@@ -1832,6 +1831,10 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		ctrl |= SDHCI_CTRL_VDD_180;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
+		/* Some controller need to do more when switching */
+		if (host->ops->voltage_switch)
+			host->ops->voltage_switch(host);
+
 		/* 1.8V regulator output should be stable within 5 ms */
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 		if (ctrl & SDHCI_CTRL_VDD_180)
@@ -1960,6 +1963,8 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 	ctrl |= SDHCI_CTRL_EXEC_TUNING;
+	if (host->quirks2 & SDHCI_QUIRK2_TUNING_WORK_AROUND)
+		ctrl |= SDHCI_CTRL_TUNED_CLK;
 	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
 	/*
@@ -2129,6 +2134,77 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
 	}
 }
 
+static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
+				int err)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+
+	if (host->flags & SDHCI_REQ_USE_DMA) {
+		if (data->host_cookie)
+			dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+					 data->flags & MMC_DATA_WRITE ?
+					 DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		mrq->data->host_cookie = 0;
+	}
+}
+
+static int sdhci_pre_dma_transfer(struct sdhci_host *host,
+				       struct mmc_data *data,
+				       struct sdhci_host_next *next)
+{
+	int sg_count;
+
+	if (!next && data->host_cookie &&
+	    data->host_cookie != host->next_data.cookie) {
+		pr_debug(DRIVER_NAME "[%s] invalid cookie: %d, next-cookie %d\n",
+			__func__, data->host_cookie, host->next_data.cookie);
+		data->host_cookie = 0;
+	}
+
+	/* Check if next job is already prepared */
+	if (next ||
+	    (!next && data->host_cookie != host->next_data.cookie)) {
+		sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg,
+				     data->sg_len,
+				     data->flags & MMC_DATA_WRITE ?
+				     DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	} else {
+		sg_count = host->next_data.sg_count;
+		host->next_data.sg_count = 0;
+	}
+
+
+	if (sg_count == 0)
+		return -EINVAL;
+
+	if (next) {
+		next->sg_count = sg_count;
+		data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
+	} else
+		host->sg_count = sg_count;
+
+	return sg_count;
+}
+
+static void sdhci_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
+			       bool is_first_req)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+
+	if (mrq->data->host_cookie) {
+		mrq->data->host_cookie = 0;
+		return;
+	}
+
+	if (host->flags & SDHCI_REQ_USE_DMA)
+		if (sdhci_pre_dma_transfer(host,
+					mrq->data,
+					&host->next_data) < 0)
+			mrq->data->host_cookie = 0;
+}
+
 static void sdhci_card_event(struct mmc_host *mmc)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -2162,6 +2238,8 @@ static void sdhci_card_event(struct mmc_host *mmc)
 
 static const struct mmc_host_ops sdhci_ops = {
 	.request	= sdhci_request,
+	.post_req	= sdhci_post_req,
+	.pre_req	= sdhci_pre_req,
 	.set_ios	= sdhci_set_ios,
 	.get_cd		= sdhci_get_cd,
 	.get_ro		= sdhci_get_ro,
@@ -2793,9 +2871,9 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 	/* Force clock and power re-program */
 	host->pwr = 0;
 	host->clock = 0;
+	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
 	sdhci_do_set_ios(host, &host->mmc->ios);
 
-	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
 	if ((host_flags & SDHCI_PV_ENABLED) &&
 		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
 		spin_lock_irqsave(&host->lock, flags);
@@ -3019,6 +3097,7 @@ int sdhci_add_host(struct sdhci_host *host)
 		host->max_clk = host->ops->get_max_clock(host);
 	}
 
+	host->next_data.cookie = 1;
 	/*
 	 * In case of Host Controller v3.00, find out whether clock
 	 * multiplier is supported.
@@ -3338,9 +3417,9 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
 
-	if (host->version >= SDHCI_SPEC_300) {
-		init_waitqueue_head(&host->buf_ready_int);
+	init_waitqueue_head(&host->buf_ready_int);
 
+	if (host->version >= SDHCI_SPEC_300) {
 		/* Initialize re-tuning timer */
 		init_timer(&host->tuning_timer);
 		host->tuning_timer.data = (unsigned long)host;

drivers/mmc/host/sdhci.h

@@ -339,6 +339,7 @@ struct sdhci_ops {
 	void    (*adma_workaround)(struct sdhci_host *host, u32 intmask);
 	void	(*platform_init)(struct sdhci_host *host);
 	void    (*card_event)(struct sdhci_host *host);
+	void	(*voltage_switch)(struct sdhci_host *host);
 };
 
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS

drivers/mmc/host/sdhci_f_sdh30.c

@@ -0,0 +1,237 @@
+/*
+ * linux/drivers/mmc/host/sdhci_f_sdh30.c
+ *
+ * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
+ *              Vincent Yang <vincent.yang@tw.fujitsu.com>
+ * Copyright (C) 2015 Linaro Ltd  Andy Green <andy.green@linaro.org>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include "sdhci-pltfm.h"
+
+/* F_SDH30 extended Controller registers */
+#define F_SDH30_AHB_CONFIG		0x100
+#define  F_SDH30_AHB_BIGED		0x00000040
+#define  F_SDH30_BUSLOCK_DMA		0x00000020
+#define  F_SDH30_BUSLOCK_EN		0x00000010
+#define  F_SDH30_SIN			0x00000008
+#define  F_SDH30_AHB_INCR_16		0x00000004
+#define  F_SDH30_AHB_INCR_8		0x00000002
+#define  F_SDH30_AHB_INCR_4		0x00000001
+
+#define F_SDH30_TUNING_SETTING		0x108
+#define  F_SDH30_CMD_CHK_DIS		0x00010000
+
+#define F_SDH30_IO_CONTROL2		0x114
+#define  F_SDH30_CRES_O_DN		0x00080000
+#define  F_SDH30_MSEL_O_1_8		0x00040000
+
+#define F_SDH30_ESD_CONTROL		0x124
+#define  F_SDH30_EMMC_RST		0x00000002
+#define  F_SDH30_EMMC_HS200		0x01000000
+
+#define F_SDH30_CMD_DAT_DELAY		0x200
+
+#define F_SDH30_MIN_CLOCK		400000
+
+struct f_sdhost_priv {
+	struct clk *clk_iface;
+	struct clk *clk;
+	u32 vendor_hs200;
+	struct device *dev;
+};
+
+void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host)
+{
+	struct f_sdhost_priv *priv = sdhci_priv(host);
+	u32 ctrl = 0;
+
+	usleep_range(2500, 3000);
+	ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
+	ctrl |= F_SDH30_CRES_O_DN;
+	sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
+	ctrl |= F_SDH30_MSEL_O_1_8;
+	sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
+
+	ctrl &= ~F_SDH30_CRES_O_DN;
+	sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
+	usleep_range(2500, 3000);
+
+	if (priv->vendor_hs200) {
+		dev_info(priv->dev, "%s: setting hs200\n", __func__);
+		ctrl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
+		ctrl |= priv->vendor_hs200;
+		sdhci_writel(host, ctrl, F_SDH30_ESD_CONTROL);
+	}
+
+	ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING);
+	ctrl |= F_SDH30_CMD_CHK_DIS;
+	sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING);
+}
+
+unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host)
+{
+	return F_SDH30_MIN_CLOCK;
+}
+
+void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask)
+{
+	if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0)
+		sdhci_writew(host, 0xBC01, SDHCI_CLOCK_CONTROL);
+
+	sdhci_reset(host, mask);
+}
+
+static const struct sdhci_ops sdhci_f_sdh30_ops = {
+	.voltage_switch = sdhci_f_sdh30_soft_voltage_switch,
+	.get_min_clock = sdhci_f_sdh30_get_min_clock,
+	.reset = sdhci_f_sdh30_reset,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static int sdhci_f_sdh30_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int irq, ctrl = 0, ret = 0;
+	struct f_sdhost_priv *priv;
+	u32 reg = 0;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "%s: no irq specified\n", __func__);
+		return irq;
+	}
+
+	host = sdhci_alloc_host(dev, sizeof(struct sdhci_host) +
+						sizeof(struct f_sdhost_priv));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	priv = sdhci_priv(host);
+	priv->dev = dev;
+
+	host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+		       SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+	host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
+			SDHCI_QUIRK2_TUNING_WORK_AROUND;
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err;
+
+	platform_set_drvdata(pdev, host);
+
+	sdhci_get_of_property(pdev);
+	host->hw_name = "f_sdh30";
+	host->ops = &sdhci_f_sdh30_ops;
+	host->irq = irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
+		goto err;
+	}
+
+	priv->clk_iface = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(priv->clk_iface)) {
+		ret = PTR_ERR(priv->clk_iface);
+		goto err;
+	}
+
+	ret = clk_prepare_enable(priv->clk_iface);
+	if (ret)
+		goto err;
+
+	priv->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		goto err_clk;
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		goto err_clk;
+
+	/* init vendor specific regs */
+	ctrl = sdhci_readw(host, F_SDH30_AHB_CONFIG);
+	ctrl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 |
+		F_SDH30_AHB_INCR_4;
+	ctrl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN);
+	sdhci_writew(host, ctrl, F_SDH30_AHB_CONFIG);
+
+	reg = sdhci_readl(host, F_SDH30_ESD_CONTROL);
+	sdhci_writel(host, reg & ~F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL);
+	msleep(20);
+	sdhci_writel(host, reg | F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL);
+
+	reg = sdhci_readl(host, SDHCI_CAPABILITIES);
+	if (reg & SDHCI_CAN_DO_8BIT)
+		priv->vendor_hs200 = F_SDH30_EMMC_HS200;
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_add_host;
+
+	return 0;
+
+err_add_host:
+	clk_disable_unprepare(priv->clk);
+err_clk:
+	clk_disable_unprepare(priv->clk_iface);
+err:
+	sdhci_free_host(host);
+	return ret;
+}
+
+static int sdhci_f_sdh30_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct f_sdhost_priv *priv = sdhci_priv(host);
+
+	sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
+			  0xffffffff);
+
+	clk_disable_unprepare(priv->clk_iface);
+	clk_disable_unprepare(priv->clk);
+
+	sdhci_free_host(host);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id f_sdh30_dt_ids[] = {
+	{ .compatible = "fujitsu,mb86s70-sdhci-3.0" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, f_sdh30_dt_ids);
+
+static struct platform_driver sdhci_f_sdh30_driver = {
+	.driver = {
+		.name = "f_sdh30",
+		.of_match_table = f_sdh30_dt_ids,
+		.pm	= SDHCI_PLTFM_PMOPS,
+	},
+	.probe	= sdhci_f_sdh30_probe,
+	.remove	= sdhci_f_sdh30_remove,
+};
+
+module_platform_driver(sdhci_f_sdh30_driver);
+
+MODULE_DESCRIPTION("F_SDH30 SD Card Controller driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("FUJITSU SEMICONDUCTOR LTD.");
+MODULE_ALIAS("platform:f_sdh30");

drivers/mmc/host/sh_mobile_sdhi.c

@@ -35,10 +35,13 @@
 
 #define EXT_ACC           0xe4
 
+#define host_to_priv(host) container_of((host)->pdata, struct sh_mobile_sdhi, mmc_data)
+
 struct sh_mobile_sdhi_of_data {
 	unsigned long tmio_flags;
 	unsigned long capabilities;
 	unsigned long capabilities2;
+	enum dma_slave_buswidth dma_buswidth;
 	dma_addr_t dma_rx_offset;
 };
 
@@ -58,6 +61,7 @@ static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
 			  TMIO_MMC_CLK_ACTUAL,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.dma_buswidth	= DMA_SLAVE_BUSWIDTH_4_BYTES,
 	.dma_rx_offset	= 0x2000,
 };
 
@@ -84,16 +88,43 @@ struct sh_mobile_sdhi {
 	struct tmio_mmc_dma dma_priv;
 };
 
+static void sh_mobile_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width)
+{
+	u32 val;
+
+	/*
+	 * see also
+	 *	sh_mobile_sdhi_of_data :: dma_buswidth
+	 */
+	switch (sd_ctrl_read16(host, CTL_VERSION)) {
+	case 0x490C:
+		val = (width == 32) ? 0x0001 : 0x0000;
+		break;
+	case 0xCB0D:
+		val = (width == 32) ? 0x0000 : 0x0001;
+		break;
+	default:
+		/* nothing to do */
+		return;
+	}
+
+	sd_ctrl_write16(host, EXT_ACC, val);
+}
+
 static int sh_mobile_sdhi_clk_enable(struct platform_device *pdev, unsigned int *f)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
+	struct sh_mobile_sdhi *priv = host_to_priv(host);
 	int ret = clk_prepare_enable(priv->clk);
 	if (ret < 0)
 		return ret;
 
 	*f = clk_get_rate(priv->clk);
+
+	/* enable 16bit data access on SDBUF as default */
+	sh_mobile_sdhi_sdbuf_width(host, 16);
+
 	return 0;
 }
 
@@ -101,7 +132,7 @@ static void sh_mobile_sdhi_clk_disable(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
+	struct sh_mobile_sdhi *priv = host_to_priv(host);
 	clk_disable_unprepare(priv->clk);
 }
 
@@ -113,7 +144,7 @@ static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
 		udelay(1);
 
 	if (!timeout) {
-		dev_warn(host->pdata->dev, "timeout waiting for SD bus idle\n");
+		dev_warn(&host->pdev->dev, "timeout waiting for SD bus idle\n");
 		return -EBUSY;
 	}
 
@@ -156,14 +187,13 @@ static int sh_mobile_sdhi_multi_io_quirk(struct mmc_card *card,
 	return blk_size;
 }
 
-static void sh_mobile_sdhi_cd_wakeup(const struct platform_device *pdev)
+static void sh_mobile_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
 {
-	mmc_detect_change(platform_get_drvdata(pdev), msecs_to_jiffies(100));
-}
+	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
 
-static const struct sh_mobile_sdhi_ops sdhi_ops = {
-	.cd_wakeup = sh_mobile_sdhi_cd_wakeup,
-};
+	/* enable 32bit access if DMA mode if possibile */
+	sh_mobile_sdhi_sdbuf_width(host, enable ? 32 : 16);
+}
 
 static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 {
@@ -177,7 +207,6 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	int irq, ret, i = 0;
 	bool multiplexed_isr = true;
 	struct tmio_mmc_dma *dma_priv;
-	u16 ver;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -192,26 +221,31 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	mmc_data = &priv->mmc_data;
 	dma_priv = &priv->dma_priv;
 
-	if (p) {
-		if (p->init) {
-			ret = p->init(pdev, &sdhi_ops);
-			if (ret)
-				return ret;
-		}
-	}
-
 	priv->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		ret = PTR_ERR(priv->clk);
 		dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
-		goto eclkget;
+		goto eprobe;
 	}
 
-	mmc_data->clk_enable = sh_mobile_sdhi_clk_enable;
-	mmc_data->clk_disable = sh_mobile_sdhi_clk_disable;
+	host = tmio_mmc_host_alloc(pdev);
+	if (!host) {
+		ret = -ENOMEM;
+		goto eprobe;
+	}
+
+	host->dma		= dma_priv;
+	host->write16_hook	= sh_mobile_sdhi_write16_hook;
+	host->clk_enable	= sh_mobile_sdhi_clk_enable;
+	host->clk_disable	= sh_mobile_sdhi_clk_disable;
+	host->multi_io_quirk	= sh_mobile_sdhi_multi_io_quirk;
+	/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
+	if (resource_size(res) > 0x100)
+		host->bus_shift = 1;
+	else
+		host->bus_shift = 0;
+
 	mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
-	mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
-	mmc_data->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk;
 	if (p) {
 		mmc_data->flags = p->tmio_flags;
 		mmc_data->ocr_mask = p->tmio_ocr_mask;
@@ -231,11 +265,10 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 			dma_priv->slave_id_rx = p->dma_slave_rx;
 		}
 	}
-
-	dma_priv->alignment_shift = 1; /* 2-byte alignment */
 	dma_priv->filter = shdma_chan_filter;
+	dma_priv->enable = sh_mobile_sdhi_enable_dma;
 
-	mmc_data->dma = dma_priv;
+	mmc_data->alignment_shift = 1; /* 2-byte alignment */
 
 	/*
 	 * All SDHI blocks support 2-byte and larger block sizes in 4-bit
@@ -258,33 +291,18 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	 */
 	mmc_data->flags |= TMIO_MMC_SDIO_STATUS_QUIRK;
 
-	/*
-	 * All SDHI have DMA control register
-	 */
-	mmc_data->flags |= TMIO_MMC_HAVE_CTL_DMA_REG;
-
 	if (of_id && of_id->data) {
 		const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
 		mmc_data->flags |= of_data->tmio_flags;
 		mmc_data->capabilities |= of_data->capabilities;
 		mmc_data->capabilities2 |= of_data->capabilities2;
-		dma_priv->dma_rx_offset = of_data->dma_rx_offset;
+		mmc_data->dma_rx_offset = of_data->dma_rx_offset;
+		dma_priv->dma_buswidth = of_data->dma_buswidth;
 	}
 
-	/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
-	mmc_data->bus_shift = resource_size(res) >> 9;
-
-	ret = tmio_mmc_host_probe(&host, pdev, mmc_data);
+	ret = tmio_mmc_host_probe(host, mmc_data);
 	if (ret < 0)
-		goto eprobe;
-
-	/*
-	 * FIXME:
-	 * this Workaround can be more clever method
-	 */
-	ver = sd_ctrl_read16(host, CTL_VERSION);
-	if (ver == 0xCB0D)
-		sd_ctrl_write16(host, EXT_ACC, 1);
+		goto efree;
 
 	/*
 	 * Allow one or more specific (named) ISRs or
@@ -351,10 +369,9 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 
 eirq:
 	tmio_mmc_host_remove(host);
+efree:
+	tmio_mmc_host_free(host);
 eprobe:
-eclkget:
-	if (p && p->cleanup)
-		p->cleanup(pdev);
 	return ret;
 }
 
@@ -362,13 +379,9 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 
 	tmio_mmc_host_remove(host);
 
-	if (p && p->cleanup)
-		p->cleanup(pdev);
-
 	return 0;
 }
 

drivers/mmc/host/sunxi-mmc.c

@@ -252,7 +252,7 @@ static int sunxi_mmc_reset_host(struct sunxi_mmc_host *host)
 	unsigned long expire = jiffies + msecs_to_jiffies(250);
 	u32 rval;
 
-	mmc_writel(host, REG_CMDR, SDXC_HARDWARE_RESET);
+	mmc_writel(host, REG_GCTRL, SDXC_HARDWARE_RESET);
 	do {
 		rval = mmc_readl(host, REG_GCTRL);
 	} while (time_before(jiffies, expire) && (rval & SDXC_HARDWARE_RESET));
@@ -310,7 +310,9 @@ static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
 	}
 
 	pdes[0].config |= SDXC_IDMAC_DES0_FD;
-	pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD;
+	pdes[i - 1].config |= SDXC_IDMAC_DES0_LD | SDXC_IDMAC_DES0_ER;
+	pdes[i - 1].config &= ~SDXC_IDMAC_DES0_DIC;
+	pdes[i - 1].buf_addr_ptr2 = 0;
 
 	/*
 	 * Avoid the io-store starting the idmac hitting io-mem before the
@@ -570,6 +572,15 @@ static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id)
 	}
 
 	dev_err(mmc_dev(host->mmc), "data error, sending stop command\n");
+
+	/*
+	 * We will never have more than one outstanding request,
+	 * and we do not complete the request until after
+	 * we've cleared host->manual_stop_mrq so we do not need to
+	 * spin lock this function.
+	 * Additionally we have wait states within this function
+	 * so having it in a lock is a very bad idea.
+	 */
 	sunxi_mmc_send_manual_stop(host, mrq);
 
 	spin_lock_irqsave(&host->lock, iflags);
@@ -616,7 +627,7 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
 static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
 				  struct mmc_ios *ios)
 {
-	u32 rate, oclk_dly, rval, sclk_dly, src_clk;
+	u32 rate, oclk_dly, rval, sclk_dly;
 	int ret;
 
 	rate = clk_round_rate(host->clk_mmc, ios->clock);
@@ -661,14 +672,6 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
 		sclk_dly = 4;
 	}
 
-	src_clk = clk_get_rate(clk_get_parent(host->clk_mmc));
-	if (src_clk >= 300000000 && src_clk <= 400000000) {
-		if (oclk_dly)
-			oclk_dly--;
-		if (sclk_dly)
-			sclk_dly--;
-	}
-
 	clk_sunxi_mmc_phase_control(host->clk_mmc, sclk_dly, oclk_dly);
 
 	return sunxi_mmc_oclk_onoff(host, 1);
@@ -766,6 +769,7 @@ static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	unsigned long iflags;
 	u32 imask = SDXC_INTERRUPT_ERROR_BIT;
 	u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f);
+	bool wait_dma = host->wait_dma;
 	int ret;
 
 	/* Check for set_ios errors (should never happen) */
@@ -816,7 +820,7 @@ static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 			if (cmd->data->flags & MMC_DATA_WRITE)
 				cmd_val |= SDXC_WRITE;
 			else
-				host->wait_dma = true;
+				wait_dma = true;
 		} else {
 			imask |= SDXC_COMMAND_DONE;
 		}
@@ -850,6 +854,7 @@ static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	}
 
 	host->mrq = mrq;
+	host->wait_dma = wait_dma;
 	mmc_writel(host, REG_IMASK, host->sdio_imask | imask);
 	mmc_writel(host, REG_CARG, cmd->arg);
 	mmc_writel(host, REG_CMDR, cmd_val);

drivers/mmc/host/tmio_mmc.c

@@ -88,14 +88,19 @@ static int tmio_mmc_probe(struct platform_device *pdev)
 	if (!res)
 		return -EINVAL;
 
-	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
-	pdata->bus_shift = resource_size(res) >> 10;
 	pdata->flags |= TMIO_MMC_HAVE_HIGH_REG;
 
-	ret = tmio_mmc_host_probe(&host, pdev, pdata);
-	if (ret)
+	host = tmio_mmc_host_alloc(pdev);
+	if (!host)
 		goto cell_disable;
 
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	host->bus_shift = resource_size(res) >> 10;
+
+	ret = tmio_mmc_host_probe(host, pdata);
+	if (ret)
+		goto host_free;
+
 	ret = request_irq(irq, tmio_mmc_irq, IRQF_TRIGGER_FALLING,
 				dev_name(&pdev->dev), host);
 	if (ret)
@@ -108,6 +113,8 @@ static int tmio_mmc_probe(struct platform_device *pdev)
 
 host_remove:
 	tmio_mmc_host_remove(host);
+host_free:
+	tmio_mmc_host_free(host);
 cell_disable:
 	if (cell->disable)
 		cell->disable(pdev);

drivers/mmc/host/tmio_mmc.h

@@ -16,6 +16,7 @@
 #ifndef TMIO_MMC_H
 #define TMIO_MMC_H
 
+#include <linux/dmaengine.h>
 #include <linux/highmem.h>
 #include <linux/mmc/tmio.h>
 #include <linux/mutex.h>
@@ -39,6 +40,17 @@
 #define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
 
 struct tmio_mmc_data;
+struct tmio_mmc_host;
+
+struct tmio_mmc_dma {
+	void *chan_priv_tx;
+	void *chan_priv_rx;
+	int slave_id_tx;
+	int slave_id_rx;
+	enum dma_slave_buswidth dma_buswidth;
+	bool (*filter)(struct dma_chan *chan, void *arg);
+	void (*enable)(struct tmio_mmc_host *host, bool enable);
+};
 
 struct tmio_mmc_host {
 	void __iomem *ctl;
@@ -56,9 +68,11 @@ struct tmio_mmc_host {
 	struct scatterlist      *sg_orig;
 	unsigned int            sg_len;
 	unsigned int            sg_off;
+	unsigned long		bus_shift;
 
 	struct platform_device *pdev;
 	struct tmio_mmc_data *pdata;
+	struct tmio_mmc_dma	*dma;
 
 	/* DMA support */
 	bool			force_pio;
@@ -83,10 +97,17 @@ struct tmio_mmc_host {
 	struct mutex		ios_lock;	/* protect set_ios() context */
 	bool			native_hotplug;
 	bool			sdio_irq_enabled;
+
+	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
+	int (*clk_enable)(struct platform_device *pdev, unsigned int *f);
+	void (*clk_disable)(struct platform_device *pdev);
+	int (*multi_io_quirk)(struct mmc_card *card,
+			      unsigned int direction, int blk_size);
 };
 
-int tmio_mmc_host_probe(struct tmio_mmc_host **host,
-			struct platform_device *pdev,
+struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev);
+void tmio_mmc_host_free(struct tmio_mmc_host *host);
+int tmio_mmc_host_probe(struct tmio_mmc_host *host,
 			struct tmio_mmc_data *pdata);
 void tmio_mmc_host_remove(struct tmio_mmc_host *host);
 void tmio_mmc_do_data_irq(struct tmio_mmc_host *host);
@@ -151,19 +172,19 @@ int tmio_mmc_host_runtime_resume(struct device *dev);
 
 static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
 {
-	return readw(host->ctl + (addr << host->pdata->bus_shift));
+	return readw(host->ctl + (addr << host->bus_shift));
 }
 
 static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
 		u16 *buf, int count)
 {
-	readsw(host->ctl + (addr << host->pdata->bus_shift), buf, count);
+	readsw(host->ctl + (addr << host->bus_shift), buf, count);
 }
 
 static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
 {
-	return readw(host->ctl + (addr << host->pdata->bus_shift)) |
-	       readw(host->ctl + ((addr + 2) << host->pdata->bus_shift)) << 16;
+	return readw(host->ctl + (addr << host->bus_shift)) |
+	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
 }
 
 static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
@@ -171,21 +192,21 @@ static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val
 	/* If there is a hook and it returns non-zero then there
 	 * is an error and the write should be skipped
 	 */
-	if (host->pdata->write16_hook && host->pdata->write16_hook(host, addr))
+	if (host->write16_hook && host->write16_hook(host, addr))
 		return;
-	writew(val, host->ctl + (addr << host->pdata->bus_shift));
+	writew(val, host->ctl + (addr << host->bus_shift));
 }
 
 static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
 		u16 *buf, int count)
 {
-	writesw(host->ctl + (addr << host->pdata->bus_shift), buf, count);
+	writesw(host->ctl + (addr << host->bus_shift), buf, count);
 }
 
 static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
 {
-	writew(val, host->ctl + (addr << host->pdata->bus_shift));
-	writew(val >> 16, host->ctl + ((addr + 2) << host->pdata->bus_shift));
+	writew(val, host->ctl + (addr << host->bus_shift));
+	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
 }
 
 

drivers/mmc/host/tmio_mmc_dma.c

@@ -28,8 +28,8 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
 	if (!host->chan_tx || !host->chan_rx)
 		return;
 
-	if (host->pdata->flags & TMIO_MMC_HAVE_CTL_DMA_REG)
-		sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
+	if (host->dma->enable)
+		host->dma->enable(host, enable);
 }
 
 void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
@@ -49,11 +49,10 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
 	struct scatterlist *sg = host->sg_ptr, *sg_tmp;
 	struct dma_async_tx_descriptor *desc = NULL;
 	struct dma_chan *chan = host->chan_rx;
-	struct tmio_mmc_data *pdata = host->pdata;
 	dma_cookie_t cookie;
 	int ret, i;
 	bool aligned = true, multiple = true;
-	unsigned int align = (1 << pdata->dma->alignment_shift) - 1;
+	unsigned int align = (1 << host->pdata->alignment_shift) - 1;
 
 	for_each_sg(sg, sg_tmp, host->sg_len, i) {
 		if (sg_tmp->offset & align)
@@ -126,11 +125,10 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host)
 	struct scatterlist *sg = host->sg_ptr, *sg_tmp;
 	struct dma_async_tx_descriptor *desc = NULL;
 	struct dma_chan *chan = host->chan_tx;
-	struct tmio_mmc_data *pdata = host->pdata;
 	dma_cookie_t cookie;
 	int ret, i;
 	bool aligned = true, multiple = true;
-	unsigned int align = (1 << pdata->dma->alignment_shift) - 1;
+	unsigned int align = (1 << host->pdata->alignment_shift) - 1;
 
 	for_each_sg(sg, sg_tmp, host->sg_len, i) {
 		if (sg_tmp->offset & align)
@@ -262,8 +260,8 @@ out:
 void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata)
 {
 	/* We can only either use DMA for both Tx and Rx or not use it at all */
-	if (!pdata->dma || (!host->pdev->dev.of_node &&
-		(!pdata->dma->chan_priv_tx || !pdata->dma->chan_priv_rx)))
+	if (!host->dma || (!host->pdev->dev.of_node &&
+		(!host->dma->chan_priv_tx || !host->dma->chan_priv_rx)))
 		return;
 
 	if (!host->chan_tx && !host->chan_rx) {
@@ -280,7 +278,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		dma_cap_set(DMA_SLAVE, mask);
 
 		host->chan_tx = dma_request_slave_channel_compat(mask,
-					pdata->dma->filter, pdata->dma->chan_priv_tx,
+					host->dma->filter, host->dma->chan_priv_tx,
 					&host->pdev->dev, "tx");
 		dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__,
 			host->chan_tx);
@@ -288,18 +286,20 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		if (!host->chan_tx)
 			return;
 
-		if (pdata->dma->chan_priv_tx)
-			cfg.slave_id = pdata->dma->slave_id_tx;
+		if (host->dma->chan_priv_tx)
+			cfg.slave_id = host->dma->slave_id_tx;
 		cfg.direction = DMA_MEM_TO_DEV;
-		cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift);
-		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->bus_shift);
+		cfg.dst_addr_width = host->dma->dma_buswidth;
+		if (!cfg.dst_addr_width)
+			cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		cfg.src_addr = 0;
 		ret = dmaengine_slave_config(host->chan_tx, &cfg);
 		if (ret < 0)
 			goto ecfgtx;
 
 		host->chan_rx = dma_request_slave_channel_compat(mask,
-					pdata->dma->filter, pdata->dma->chan_priv_rx,
+					host->dma->filter, host->dma->chan_priv_rx,
 					&host->pdev->dev, "rx");
 		dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__,
 			host->chan_rx);
@@ -307,11 +307,13 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		if (!host->chan_rx)
 			goto ereqrx;
 
-		if (pdata->dma->chan_priv_rx)
-			cfg.slave_id = pdata->dma->slave_id_rx;
+		if (host->dma->chan_priv_rx)
+			cfg.slave_id = host->dma->slave_id_rx;
 		cfg.direction = DMA_DEV_TO_MEM;
-		cfg.src_addr = cfg.dst_addr + pdata->dma->dma_rx_offset;
-		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		cfg.src_addr = cfg.dst_addr + host->pdata->dma_rx_offset;
+		cfg.src_addr_width = host->dma->dma_buswidth;
+		if (!cfg.src_addr_width)
+			cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		cfg.dst_addr = 0;
 		ret = dmaengine_slave_config(host->chan_rx, &cfg);
 		if (ret < 0)

drivers/mmc/host/tmio_mmc_pio.c

@@ -835,13 +835,12 @@ fail:
 static int tmio_mmc_clk_update(struct tmio_mmc_host *host)
 {
 	struct mmc_host *mmc = host->mmc;
-	struct tmio_mmc_data *pdata = host->pdata;
 	int ret;
 
-	if (!pdata->clk_enable)
+	if (!host->clk_enable)
 		return -ENOTSUPP;
 
-	ret = pdata->clk_enable(host->pdev, &mmc->f_max);
+	ret = host->clk_enable(host->pdev, &mmc->f_max);
 	if (!ret)
 		mmc->f_min = mmc->f_max / 512;
 
@@ -1005,10 +1004,9 @@ static int tmio_multi_io_quirk(struct mmc_card *card,
 			       unsigned int direction, int blk_size)
 {
 	struct tmio_mmc_host *host = mmc_priv(card->host);
-	struct tmio_mmc_data *pdata = host->pdata;
 
-	if (pdata->multi_io_quirk)
-		return pdata->multi_io_quirk(card, direction, blk_size);
+	if (host->multi_io_quirk)
+		return host->multi_io_quirk(card, direction, blk_size);
 
 	return blk_size;
 }
@@ -1054,12 +1052,37 @@ static void tmio_mmc_of_parse(struct platform_device *pdev,
 		pdata->flags |= TMIO_MMC_WRPROTECT_DISABLE;
 }
 
-int tmio_mmc_host_probe(struct tmio_mmc_host **host,
-				  struct platform_device *pdev,
-				  struct tmio_mmc_data *pdata)
+struct tmio_mmc_host*
+tmio_mmc_host_alloc(struct platform_device *pdev)
 {
-	struct tmio_mmc_host *_host;
+	struct tmio_mmc_host *host;
 	struct mmc_host *mmc;
+
+	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
+	if (!mmc)
+		return NULL;
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->pdev = pdev;
+
+	return host;
+}
+EXPORT_SYMBOL(tmio_mmc_host_alloc);
+
+void tmio_mmc_host_free(struct tmio_mmc_host *host)
+{
+	mmc_free_host(host->mmc);
+
+	host->mmc = NULL;
+}
+EXPORT_SYMBOL(tmio_mmc_host_free);
+
+int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
+			struct tmio_mmc_data *pdata)
+{
+	struct platform_device *pdev = _host->pdev;
+	struct mmc_host *mmc = _host->mmc;
 	struct resource *res_ctl;
 	int ret;
 	u32 irq_mask = TMIO_MASK_CMD;
@@ -1067,25 +1090,17 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	tmio_mmc_of_parse(pdev, pdata);
 
 	if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT))
-		pdata->write16_hook = NULL;
+		_host->write16_hook = NULL;
 
 	res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res_ctl)
 		return -EINVAL;
 
-	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
-	if (!mmc)
-		return -ENOMEM;
-
 	ret = mmc_of_parse(mmc);
 	if (ret < 0)
 		goto host_free;
 
-	pdata->dev = &pdev->dev;
-	_host = mmc_priv(mmc);
 	_host->pdata = pdata;
-	_host->mmc = mmc;
-	_host->pdev = pdev;
 	platform_set_drvdata(pdev, mmc);
 
 	_host->set_pwr = pdata->set_pwr;
@@ -1192,12 +1207,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 		mmc_gpiod_request_cd_irq(mmc);
 	}
 
-	*host = _host;
-
 	return 0;
 
 host_free:
-	mmc_free_host(mmc);
 
 	return ret;
 }
@@ -1222,7 +1234,6 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host)
 	pm_runtime_disable(&pdev->dev);
 
 	iounmap(host->ctl);
-	mmc_free_host(mmc);
 }
 EXPORT_SYMBOL(tmio_mmc_host_remove);
 
@@ -1237,8 +1248,8 @@ int tmio_mmc_host_runtime_suspend(struct device *dev)
 	if (host->clk_cache)
 		tmio_mmc_clk_stop(host);
 
-	if (host->pdata->clk_disable)
-		host->pdata->clk_disable(host->pdev);
+	if (host->clk_disable)
+		host->clk_disable(host->pdev);
 
 	return 0;
 }

drivers/mmc/host/toshsd.c

@@ -176,7 +176,8 @@ static irqreturn_t toshsd_thread_irq(int irq, void *dev_id)
 	spin_lock_irqsave(&host->lock, flags);
 
 	if (!sg_miter_next(sg_miter))
-		return IRQ_HANDLED;
+		goto done;
+
 	buf = sg_miter->addr;
 
 	/* Ensure we dont read more than one block. The chip will interrupt us
@@ -198,6 +199,7 @@ static irqreturn_t toshsd_thread_irq(int irq, void *dev_id)
 	sg_miter->consumed = count;
 	sg_miter_stop(sg_miter);
 
+done:
 	spin_unlock_irqrestore(&host->lock, flags);
 
 	return IRQ_HANDLED;
@@ -699,18 +701,7 @@ static struct pci_driver toshsd_driver = {
 	.driver.pm = &toshsd_pm_ops,
 };
 
-static int __init toshsd_drv_init(void)
-{
-	return pci_register_driver(&toshsd_driver);
-}
-
-static void __exit toshsd_drv_exit(void)
-{
-	pci_unregister_driver(&toshsd_driver);
-}
-
-module_init(toshsd_drv_init);
-module_exit(toshsd_drv_exit);
+module_pci_driver(toshsd_driver);
 
 MODULE_AUTHOR("Ondrej Zary, Richard Betts");
 MODULE_DESCRIPTION("Toshiba PCI Secure Digital Host Controller Interface driver");

drivers/mmc/host/vub300.c

@@ -659,7 +659,7 @@ static void __vub300_irqpoll_response(struct vub300_mmc_host *vub300)
 static void __do_poll(struct vub300_mmc_host *vub300)
 {
 	/* cmd_mutex is held by vub300_pollwork_thread */
-	long commretval;
+	unsigned long commretval;
 	mod_timer(&vub300->inactivity_timer, jiffies + HZ);
 	init_completion(&vub300->irqpoll_complete);
 	send_irqpoll(vub300);
@@ -671,8 +671,6 @@ static void __do_poll(struct vub300_mmc_host *vub300)
 		vub300->usb_timed_out = 1;
 		usb_kill_urb(vub300->command_out_urb);
 		usb_kill_urb(vub300->command_res_urb);
-	} else if (commretval < 0) {
-		vub300_queue_poll_work(vub300, 1);
 	} else { /* commretval > 0 */
 		__vub300_irqpoll_response(vub300);
 	}

include/linux/mfd/tmio.h

@@ -95,11 +95,6 @@
  */
 #define TMIO_MMC_SDIO_STATUS_QUIRK	(1 << 8)
 
-/*
- * Some controllers have DMA enable/disable register
- */
-#define TMIO_MMC_HAVE_CTL_DMA_REG	(1 << 9)
-
 /*
  * Some controllers allows to set SDx actual clock
  */
@@ -112,18 +107,6 @@ void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
 
 struct dma_chan;
 
-struct tmio_mmc_dma {
-	void *chan_priv_tx;
-	void *chan_priv_rx;
-	int slave_id_tx;
-	int slave_id_rx;
-	int alignment_shift;
-	dma_addr_t dma_rx_offset;
-	bool (*filter)(struct dma_chan *chan, void *arg);
-};
-
-struct tmio_mmc_host;
-
 /*
  * data for the MMC controller
  */
@@ -132,19 +115,12 @@ struct tmio_mmc_data {
 	unsigned long			capabilities;
 	unsigned long			capabilities2;
 	unsigned long			flags;
-	unsigned long			bus_shift;
 	u32				ocr_mask;	/* available voltages */
-	struct tmio_mmc_dma		*dma;
-	struct device			*dev;
 	unsigned int			cd_gpio;
+	int				alignment_shift;
+	dma_addr_t			dma_rx_offset;
 	void (*set_pwr)(struct platform_device *host, int state);
 	void (*set_clk_div)(struct platform_device *host, int state);
-	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
-	/* clock management callbacks */
-	int (*clk_enable)(struct platform_device *pdev, unsigned int *f);
-	void (*clk_disable)(struct platform_device *pdev);
-	int (*multi_io_quirk)(struct mmc_card *card,
-			      unsigned int direction, int blk_size);
 };
 
 /*

include/linux/mmc/card.h

@@ -83,7 +83,7 @@ struct mmc_ext_csd {
 	bool			hpi;			/* HPI support bit */
 	unsigned int		hpi_cmd;		/* cmd used as HPI */
 	bool			bkops;		/* background support bit */
-	bool			bkops_en;	/* background enable bit */
+	bool			man_bkops_en;	/* manual bkops enable bit */
 	unsigned int            data_sector_size;       /* 512 bytes or 4KB */
 	unsigned int            data_tag_unit_size;     /* DATA TAG UNIT size */
 	unsigned int		boot_ro_lock;		/* ro lock support */

include/linux/mmc/core.h

@@ -182,7 +182,6 @@ extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
 extern int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
 			      bool is_rel_write);
 extern int mmc_hw_reset(struct mmc_host *host);
-extern int mmc_hw_reset_check(struct mmc_host *host);
 extern int mmc_can_reset(struct mmc_card *card);
 
 extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);

include/linux/mmc/dw_mmc.h

@@ -106,6 +106,11 @@ struct mmc_data;
  * @cur_slot, @mrq and @state. These must always be updated
  * at the same time while holding @lock.
  *
+ * @irq_lock is an irq-safe spinlock protecting the INTMASK register
+ * to allow the interrupt handler to modify it directly.  Held for only long
+ * enough to read-modify-write INTMASK and no other locks are grabbed when
+ * holding this one.
+ *
  * The @mrq field of struct dw_mci_slot is also protected by @lock,
  * and must always be written at the same time as the slot is added to
  * @queue.
@@ -125,6 +130,7 @@ struct mmc_data;
  */
 struct dw_mci {
 	spinlock_t		lock;
+	spinlock_t		irq_lock;
 	void __iomem		*regs;
 
 	struct scatterlist	*sg;

include/linux/mmc/host.h

@@ -166,7 +166,6 @@ struct mmc_async_req {
  * struct mmc_slot - MMC slot functions
  *
  * @cd_irq:		MMC/SD-card slot hotplug detection IRQ or -EINVAL
- * @lock:		protect the @handler_priv pointer
  * @handler_priv:	MMC/SD-card slot context
  *
  * Some MMC/SD host controllers implement slot-functions like card and
@@ -176,7 +175,6 @@ struct mmc_async_req {
  */
 struct mmc_slot {
 	int cd_irq;
-	struct mutex lock;
 	void *handler_priv;
 };
 
@@ -197,6 +195,7 @@ struct mmc_context_info {
 };
 
 struct regulator;
+struct mmc_pwrseq;
 
 struct mmc_supply {
 	struct regulator *vmmc;		/* Card power supply */
@@ -208,6 +207,7 @@ struct mmc_host {
 	struct device		class_dev;
 	int			index;
 	const struct mmc_host_ops *ops;
+	struct mmc_pwrseq	*pwrseq;
 	unsigned int		f_min;
 	unsigned int		f_max;
 	unsigned int		f_init;

include/linux/mmc/mmc.h

@@ -53,11 +53,6 @@
 #define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
 #define MMC_SEND_TUNING_BLOCK_HS200	21	/* adtc R1  */
 
-#define MMC_TUNING_BLK_PATTERN_4BIT_SIZE	 64
-#define MMC_TUNING_BLK_PATTERN_8BIT_SIZE	128
-extern const u8 tuning_blk_pattern_4bit[MMC_TUNING_BLK_PATTERN_4BIT_SIZE];
-extern const u8 tuning_blk_pattern_8bit[MMC_TUNING_BLK_PATTERN_8BIT_SIZE];
-
   /* class 3 */
 #define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
 
@@ -432,6 +427,11 @@ struct _mmc_csd {
  */
 #define EXT_CSD_BKOPS_LEVEL_2		0x2
 
+/*
+ * BKOPS modes
+ */
+#define EXT_CSD_MANUAL_BKOPS_MASK	0x01
+
 /*
  * MMC_SWITCH access modes
  */

include/linux/mmc/sdhci.h

@@ -17,6 +17,11 @@
 #include <linux/io.h>
 #include <linux/mmc/host.h>
 
+struct sdhci_host_next {
+	unsigned int	sg_count;
+	s32		cookie;
+};
+
 struct sdhci_host {
 	/* Data set by hardware interface driver */
 	const char *hw_name;	/* Hardware bus name */
@@ -106,6 +111,10 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD	(1<<10)
 /* Capability register bit-63 indicates HS400 support */
 #define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400		(1<<11)
+/* forced tuned clock */
+#define SDHCI_QUIRK2_TUNING_WORK_AROUND			(1<<12)
+/* disable the block count for single block transactions */
+#define SDHCI_QUIRK2_SUPPORT_SINGLE			(1<<13)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
@@ -203,6 +212,7 @@ struct sdhci_host {
 #define SDHCI_TUNING_MODE_1	0
 	struct timer_list	tuning_timer;	/* Timer for tuning */
 
+	struct sdhci_host_next	next_data;
 	unsigned long private[0] ____cacheline_aligned;
 };
 #endif /* LINUX_MMC_SDHCI_H */

include/linux/mmc/sh_mobile_sdhi.h

@@ -3,20 +3,10 @@
 
 #include <linux/types.h>
 
-struct platform_device;
-
 #define SH_MOBILE_SDHI_IRQ_CARD_DETECT	"card_detect"
 #define SH_MOBILE_SDHI_IRQ_SDCARD	"sdcard"
 #define SH_MOBILE_SDHI_IRQ_SDIO		"sdio"
 
-/**
- * struct sh_mobile_sdhi_ops - SDHI driver callbacks
- * @cd_wakeup:		trigger a card-detection run
- */
-struct sh_mobile_sdhi_ops {
-	void (*cd_wakeup)(const struct platform_device *pdev);
-};
-
 struct sh_mobile_sdhi_info {
 	int dma_slave_tx;
 	int dma_slave_rx;
@@ -25,11 +15,6 @@ struct sh_mobile_sdhi_info {
 	unsigned long tmio_caps2;
 	u32 tmio_ocr_mask;	/* available MMC voltages */
 	unsigned int cd_gpio;
-
-	/* callbacks for board specific setup code */
-	int (*init)(struct platform_device *pdev,
-		    const struct sh_mobile_sdhi_ops *ops);
-	void (*cleanup)(struct platform_device *pdev);
 };
 
 #endif /* LINUX_MMC_SH_MOBILE_SDHI_H */

include/linux/mmc/slot-gpio.h

@@ -15,12 +15,10 @@ struct mmc_host;
 
 int mmc_gpio_get_ro(struct mmc_host *host);
 int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio);
-void mmc_gpio_free_ro(struct mmc_host *host);
 
 int mmc_gpio_get_cd(struct mmc_host *host);
 int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 			unsigned int debounce);
-void mmc_gpio_free_cd(struct mmc_host *host);
 
 int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
@@ -28,7 +26,8 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
 			 unsigned int debounce, bool *gpio_invert);
-void mmc_gpiod_free_cd(struct mmc_host *host);
+void mmc_gpio_set_cd_isr(struct mmc_host *host,
+			 irqreturn_t (*isr)(int irq, void *dev_id));
 void mmc_gpiod_request_cd_irq(struct mmc_host *host);
 
 #endif

include/linux/platform_data/mmc-omap.h

@@ -31,10 +31,6 @@ struct omap_mmc_platform_data {
 	void (*cleanup)(struct device *dev);
 	void (*shutdown)(struct device *dev);
 
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev, int slot);
-	int (*resume)(struct device *dev, int slot);
-
 	/* Return context loss count due to PM states changing */
 	int (*get_context_loss_count)(struct device *dev);