Browse Source

power: supply: max17042_battery: Add support for the STATUS property

Userspace prefers the driver having a status property over having to guess
itself. Specifically this will properly make the GNOME3 UI (and likely
others) properly show discharging / charging / full status, instead
of always showing discharging as status.

Note that in the case there is no charger driver supplying the max17042,
then a status of unknown will get returned. At least upower treats
this the same as not having a status attribute, so in this case nothing
changes from a userspace pov.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Hans de Goede 8 years ago
parent
commit
a9df22c00d
2 changed files with 49 additions and 0 deletions
  1. 46 0
      drivers/power/supply/max17042_battery.c
  2. 3 0
      include/linux/power/max17042_battery.h

+ 46 - 0
drivers/power/supply/max17042_battery.c

@@ -76,6 +76,7 @@ struct max17042_chip {
 };
 
 static enum power_supply_property max17042_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX,
@@ -113,6 +114,46 @@ static int max17042_get_temperature(struct max17042_chip *chip, int *temp)
 	return 0;
 }
 
+static int max17042_get_status(struct max17042_chip *chip, int *status)
+{
+	int ret, charge_full, charge_now;
+
+	ret = power_supply_am_i_supplied(chip->battery);
+	if (ret < 0) {
+		*status = POWER_SUPPLY_STATUS_UNKNOWN;
+		return 0;
+	}
+	if (ret == 0) {
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	/*
+	 * The MAX170xx has builtin end-of-charge detection and will update
+	 * FullCAP to match RepCap when it detects end of charging.
+	 *
+	 * When this cycle the battery gets charged to a higher (calculated)
+	 * capacity then the previous cycle then FullCAP will get updated
+	 * contineously once end-of-charge detection kicks in, so allow the
+	 * 2 to differ a bit.
+	 */
+
+	ret = regmap_read(chip->regmap, MAX17042_FullCAP, &charge_full);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(chip->regmap, MAX17042_RepCap, &charge_now);
+	if (ret < 0)
+		return ret;
+
+	if ((charge_full - charge_now) <= MAX17042_FULL_THRESHOLD)
+		*status = POWER_SUPPLY_STATUS_FULL;
+	else
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+
+	return 0;
+}
+
 static int max17042_get_battery_health(struct max17042_chip *chip, int *health)
 {
 	int temp, vavg, vbatt, ret;
@@ -182,6 +223,11 @@ static int max17042_get_property(struct power_supply *psy,
 		return -EAGAIN;
 
 	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max17042_get_status(chip, &val->intval);
+		if (ret < 0)
+			return ret;
+		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		ret = regmap_read(map, MAX17042_STATUS, &data);
 		if (ret < 0)

+ 3 - 0
include/linux/power/max17042_battery.h

@@ -31,6 +31,9 @@
 #define MAX17042_DEFAULT_TEMP_MIN	(0)    /* For sys without temp sensor */
 #define MAX17042_DEFAULT_TEMP_MAX	(700)  /* 70 degrees Celcius */
 
+/* Consider RepCap which is less then 10 units below FullCAP full */
+#define MAX17042_FULL_THRESHOLD		10
+
 #define MAX17042_CHARACTERIZATION_DATA_SIZE 48
 
 enum max17042_register {