arm64: dts: NS2 secondary core enablement via PSCI

Declare PSCI-1.0 node and enable CPU_ON method via PSCI.  Spin-table
memreserve has been removed as well as syscon based reset, as PSCI-1.0
expects reset implementation in firmware.

Signed-off-by: Luke Starrett <luke.starrett@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -33,8 +33,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/bcm-ns2.h>
 
-/memreserve/ 0x84b00000 0x00000008;
-
 / {
 	compatible = "brcm,ns2";
 	interrupt-parent = <&gic>;
@@ -49,8 +47,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -58,8 +55,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -67,8 +63,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -76,8 +71,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -86,6 +80,11 @@
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
@@ -252,18 +251,6 @@
 			mmu-masters;
 		};
 
-		crmu: crmu@65024000 {
-			compatible = "syscon";
-			reg = <0x65024000 0x100>;
-		};
-
-		reboot@65024000 {
-			compatible ="syscon-reboot";
-			regmap = <&crmu>;
-			offset = <0x90>;
-			mask = <0xfffffffd>;
-		};
-
 		gic: interrupt-controller@65210000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;