drm/i915/skl: Add support for edp 1.4 intermediate frequencies

eDp 1.4 supports custom frequencies.
Skylake supports following intermediate frequencies : 3.24 GHz, 2.16 GHz and
4.32 GHz along with usual LBR, HBR and HBR2 frequencies.
Read sink supported frequencies and get common frequencies from sink and
source and use these for link training.

v2: Rebased, removed calculation of min_clock since for edp it is taken as
max_clock (as per comment).
v3: Keeping single array for link rates (Satheesh)
v4: Setting LINK_BW_SET to 0 when setting LINK_RATE_SET (Satheesh)
v5: Some minor nits (Ville)
v6: Keeping separate arrays for source and sink rates (Ville)
v7: Remove redundant setting of DP_LINK_BW_SET to 0 (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_ddi.c

@@ -784,9 +784,18 @@ static void skl_ddi_clock_get(struct intel_encoder *encoder,
 		case DPLL_CRTL1_LINK_RATE_810:
 			link_clock = 81000;
 			break;
+		case DPLL_CRTL1_LINK_RATE_1080:
+			link_clock = 108000;
+			break;
 		case DPLL_CRTL1_LINK_RATE_1350:
 			link_clock = 135000;
 			break;
+		case DPLL_CRTL1_LINK_RATE_1620:
+			link_clock = 162000;
+			break;
+		case DPLL_CRTL1_LINK_RATE_2160:
+			link_clock = 216000;
+			break;
 		case DPLL_CRTL1_LINK_RATE_2700:
 			link_clock = 270000;
 			break;

drivers/gpu/drm/i915/intel_dp.c

@@ -84,6 +84,11 @@ static const struct dp_link_dpll chv_dpll[] = {
 	{ DP_LINK_BW_5_4,	/* m2_int = 27, m2_fraction = 0 */
 		{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
 };
+/* Skylake supports following rates */
+static const uint32_t gen9_rates[] = { 162000, 216000, 270000, 324000,
+					432000, 540000 };
+
+static const uint32_t default_rates[] = { 162000, 270000, 540000 };
 
 /**
  * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
@@ -1144,6 +1149,25 @@ intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates)
 	return i;
 }
 
+static int
+intel_read_source_rates(struct intel_dp *intel_dp, uint32_t *source_rates)
+{
+	struct drm_device *dev = intel_dp_to_dev(intel_dp);
+	int i;
+	int max_default_rate;
+
+	if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
+		for (i = 0; i < ARRAY_SIZE(gen9_rates); ++i)
+			source_rates[i] = gen9_rates[i];
+	} else {
+		/* Index of the max_link_bw supported + 1 */
+		max_default_rate = (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
+		for (i = 0; i < max_default_rate; ++i)
+			source_rates[i] = default_rates[i];
+	}
+	return i;
+}
+
 static void
 intel_dp_set_clock(struct intel_encoder *encoder,
 		   struct intel_crtc_state *pipe_config, int link_bw)
@@ -1177,6 +1201,45 @@ intel_dp_set_clock(struct intel_encoder *encoder,
 	}
 }
 
+static int intel_supported_rates(const uint32_t *source_rates, int source_len,
+const uint32_t *sink_rates, int sink_len, uint32_t *supported_rates)
+{
+	int i = 0, j = 0, k = 0;
+
+	/* For panels with edp version less than 1.4 */
+	if (sink_len == 0) {
+		for (i = 0; i < source_len; ++i)
+			supported_rates[i] = source_rates[i];
+		return source_len;
+	}
+
+	/* For edp1.4 panels, find the common rates between source and sink */
+	while (i < source_len && j < sink_len) {
+		if (source_rates[i] == sink_rates[j]) {
+			supported_rates[k] = source_rates[i];
+			++k;
+			++i;
+			++j;
+		} else if (source_rates[i] < sink_rates[j]) {
+			++i;
+		} else {
+			++j;
+		}
+	}
+	return k;
+}
+
+static int rate_to_index(uint32_t find, const uint32_t *rates)
+{
+	int i = 0;
+
+	for (i = 0; i < DP_MAX_SUPPORTED_RATES; ++i)
+		if (find == rates[i])
+			break;
+
+	return i;
+}
+
 bool
 intel_dp_compute_config(struct intel_encoder *encoder,
 			struct intel_crtc_state *pipe_config)
@@ -1193,10 +1256,25 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	int max_lane_count = intel_dp_max_lane_count(intel_dp);
 	/* Conveniently, the link BW constants become indices with a shift...*/
 	int min_clock = 0;
-	int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
+	int max_clock;
 	int bpp, mode_rate;
-	static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
 	int link_avail, link_clock;
+	uint32_t sink_rates[8];
+	uint32_t supported_rates[8] = {0};
+	uint32_t source_rates[8];
+	int source_len, sink_len, supported_len;
+
+	sink_len = intel_read_sink_rates(intel_dp, sink_rates);
+
+	source_len = intel_read_source_rates(intel_dp, source_rates);
+
+	supported_len = intel_supported_rates(source_rates, source_len,
+				sink_rates, sink_len, supported_rates);
+
+	/* No common link rates between source and sink */
+	WARN_ON(supported_len <= 0);
+
+	max_clock = supported_len - 1;
 
 	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
 		pipe_config->has_pch_encoder = true;
@@ -1220,8 +1298,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		return false;
 
 	DRM_DEBUG_KMS("DP link computation with max lane count %i "
-		      "max bw %02x pixel clock %iKHz\n",
-		      max_lane_count, bws[max_clock],
+		      "max bw %d pixel clock %iKHz\n",
+		      max_lane_count, supported_rates[max_clock],
 		      adjusted_mode->crtc_clock);
 
 	/* Walk through all bpp values. Luckily they're all nicely spaced with 2
@@ -1250,8 +1328,11 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 						   bpp);
 
 		for (clock = min_clock; clock <= max_clock; clock++) {
-			for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
-				link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
+			for (lane_count = min_lane_count;
+				lane_count <= max_lane_count;
+				lane_count <<= 1) {
+
+				link_clock = supported_rates[clock];
 				link_avail = intel_dp_max_data_rate(link_clock,
 								    lane_count);
 
@@ -1280,10 +1361,19 @@ found:
 	if (intel_dp->color_range)
 		pipe_config->limited_color_range = true;
 
-	intel_dp->link_bw = bws[clock];
 	intel_dp->lane_count = lane_count;
+
+	intel_dp->link_bw =
+		drm_dp_link_rate_to_bw_code(supported_rates[clock]);
+
+	if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
+		intel_dp->rate_select =
+			rate_to_index(supported_rates[clock], sink_rates);
+		intel_dp->link_bw = 0;
+	}
+
 	pipe_config->pipe_bpp = bpp;
-	pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
+	pipe_config->port_clock = supported_rates[clock];
 
 	DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
 		      intel_dp->link_bw, intel_dp->lane_count,
@@ -3393,6 +3483,9 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 	if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
 		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
 	drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
+	if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0])
+		drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
+				&intel_dp->rate_select, 1);
 
 	link_config[0] = 0;
 	link_config[1] = DP_SET_ANSI_8B10B;

drivers/gpu/drm/i915/intel_drv.h

@@ -622,6 +622,7 @@ struct intel_dp {
 	uint32_t color_range;
 	bool color_range_auto;
 	uint8_t link_bw;
+	uint8_t rate_select;
 	uint8_t lane_count;
 	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
 	uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];