Explorar el Código

sh: Fix up the shared IRQ demuxer's control bit testing logic.

Correct the interrupt handler in sh4 serial device, return the correct
value and check for what is anabled in the SCSCR register. The sh7722 is
broken just sending a break using minicom.

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Michael Trimarchi hace 17 años
padre
commit
a8884e3415
Se han modificado 2 ficheros con 13 adiciones y 11 borrados
  1. 12 11
      drivers/serial/sh-sci.c
  2. 1 0
      drivers/serial/sh-sci.h

+ 12 - 11
drivers/serial/sh-sci.c

@@ -797,26 +797,27 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 
 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
-        unsigned short ssr_status, scr_status;
-        struct uart_port *port = ptr;
+	unsigned short ssr_status, scr_status;
+	struct uart_port *port = ptr;
+	irqreturn_t ret = IRQ_NONE;
 
         ssr_status = sci_in(port,SCxSR);
         scr_status = sci_in(port,SCSCR);
 
 	/* Tx Interrupt */
-        if ((ssr_status & 0x0020) && (scr_status & 0x0080))
-                sci_tx_interrupt(irq, ptr);
+	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+		ret = sci_tx_interrupt(irq, ptr);
 	/* Rx Interrupt */
-        if ((ssr_status & 0x0002) && (scr_status & 0x0040))
-                sci_rx_interrupt(irq, ptr);
+	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-        if ((ssr_status & 0x0080) && (scr_status & 0x0400))
-                sci_er_interrupt(irq, ptr);
+	if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-        if ((ssr_status & 0x0010) && (scr_status & 0x0200))
-                sci_br_interrupt(irq, ptr);
+	if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+		ret = sci_br_interrupt(irq, ptr);
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)

+ 1 - 0
drivers/serial/sh-sci.h

@@ -166,6 +166,7 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7091)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7722)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
     defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7751R) || \