ath10k: add FW API support to test mode

Add WMI-TLV and FW API support in ath10k testmode.
Ath10k can get right wmi command format from UTF image
to communicate UTF firmware.

Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.c

@@ -569,8 +569,8 @@ static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode mode)
 		}
 		break;
 	case ATH10K_FIRMWARE_MODE_UTF:
-		data = ar->testmode.utf->data;
-		data_len = ar->testmode.utf->size;
+		data = ar->testmode.utf_firmware_data;
+		data_len = ar->testmode.utf_firmware_len;
 		mode_name = "utf";
 		break;
 	default:

drivers/net/wireless/ath/ath10k/core.h

@@ -817,9 +817,12 @@ struct ath10k {
 	struct {
 		/* protected by conf_mutex */
 		const struct firmware *utf;
+		char utf_version[32];
+		const void *utf_firmware_data;
+		size_t utf_firmware_len;
 		DECLARE_BITMAP(orig_fw_features, ATH10K_FW_FEATURE_COUNT);
 		enum ath10k_fw_wmi_op_version orig_wmi_op_version;
-
+		enum ath10k_fw_wmi_op_version op_version;
 		/* protected by data_lock */
 		bool utf_monitor;
 	} testmode;

drivers/net/wireless/ath/ath10k/hw.h

@@ -94,6 +94,7 @@ enum qca6174_chip_id_rev {
 #define ATH10K_FW_API5_FILE		"firmware-5.bin"
 
 #define ATH10K_FW_UTF_FILE		"utf.bin"
+#define ATH10K_FW_UTF_API2_FILE		"utf-2.bin"
 
 /* includes also the null byte */
 #define ATH10K_FIRMWARE_MAGIC               "QCA-ATH10K"

drivers/net/wireless/ath/ath10k/testmode.c

@@ -139,11 +139,181 @@ static int ath10k_tm_cmd_get_version(struct ath10k *ar, struct nlattr *tb[])
 	return cfg80211_testmode_reply(skb);
 }
 
-static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
+static int ath10k_tm_fetch_utf_firmware_api_2(struct ath10k *ar)
+{
+	size_t len, magic_len, ie_len;
+	struct ath10k_fw_ie *hdr;
+	char filename[100];
+	__le32 *version;
+	const u8 *data;
+	int ie_id, ret;
+
+	snprintf(filename, sizeof(filename), "%s/%s",
+		 ar->hw_params.fw.dir, ATH10K_FW_UTF_API2_FILE);
+
+	/* load utf firmware image */
+	ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
+	if (ret) {
+		ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
+			    filename, ret);
+		return ret;
+	}
+
+	data = ar->testmode.utf->data;
+	len = ar->testmode.utf->size;
+
+	/* FIXME: call release_firmware() in error cases */
+
+	/* magic also includes the null byte, check that as well */
+	magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1;
+
+	if (len < magic_len) {
+		ath10k_err(ar, "utf firmware file is too small to contain magic\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) {
+		ath10k_err(ar, "invalid firmware magic\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* jump over the padding */
+	magic_len = ALIGN(magic_len, 4);
+
+	len -= magic_len;
+	data += magic_len;
+
+	/* loop elements */
+	while (len > sizeof(struct ath10k_fw_ie)) {
+		hdr = (struct ath10k_fw_ie *)data;
+
+		ie_id = le32_to_cpu(hdr->id);
+		ie_len = le32_to_cpu(hdr->len);
+
+		len -= sizeof(*hdr);
+		data += sizeof(*hdr);
+
+		if (len < ie_len) {
+			ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n",
+				   ie_id, len, ie_len);
+			ret = -EINVAL;
+			goto err;
+		}
+
+		switch (ie_id) {
+		case ATH10K_FW_IE_FW_VERSION:
+			if (ie_len > sizeof(ar->testmode.utf_version) - 1)
+				break;
+
+			memcpy(ar->testmode.utf_version, data, ie_len);
+			ar->testmode.utf_version[ie_len] = '\0';
+
+			ath10k_dbg(ar, ATH10K_DBG_TESTMODE,
+				   "testmode found fw utf version %s\n",
+				   ar->testmode.utf_version);
+			break;
+		case ATH10K_FW_IE_TIMESTAMP:
+			/* ignore timestamp, but don't warn about it either */
+			break;
+		case ATH10K_FW_IE_FW_IMAGE:
+			ath10k_dbg(ar, ATH10K_DBG_TESTMODE,
+				   "testmode found fw image ie (%zd B)\n",
+				   ie_len);
+
+			ar->testmode.utf_firmware_data = data;
+			ar->testmode.utf_firmware_len = ie_len;
+			break;
+		case ATH10K_FW_IE_WMI_OP_VERSION:
+			if (ie_len != sizeof(u32))
+				break;
+			version = (__le32 *)data;
+			ar->testmode.op_version = le32_to_cpup(version);
+			ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode found fw ie wmi op version %d\n",
+				   ar->testmode.op_version);
+			break;
+		default:
+			ath10k_warn(ar, "Unknown testmode FW IE: %u\n",
+				    le32_to_cpu(hdr->id));
+			break;
+		}
+		/* jump over the padding */
+		ie_len = ALIGN(ie_len, 4);
+
+		len -= ie_len;
+		data += ie_len;
+	}
+
+	if (!ar->testmode.utf_firmware_data || !ar->testmode.utf_firmware_len) {
+		ath10k_err(ar, "No ATH10K_FW_IE_FW_IMAGE found\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	release_firmware(ar->testmode.utf);
+
+	return ret;
+}
+
+static int ath10k_tm_fetch_utf_firmware_api_1(struct ath10k *ar)
 {
 	char filename[100];
 	int ret;
 
+	snprintf(filename, sizeof(filename), "%s/%s",
+		 ar->hw_params.fw.dir, ATH10K_FW_UTF_FILE);
+
+	/* load utf firmware image */
+	ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
+	if (ret) {
+		ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
+			    filename, ret);
+		return ret;
+	}
+
+	/* We didn't find FW UTF API 1 ("utf.bin") does not advertise
+	 * firmware features. Do an ugly hack where we force the firmware
+	 * features to match with 10.1 branch so that wmi.c will use the
+	 * correct WMI interface.
+	 */
+
+	ar->testmode.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
+	ar->testmode.utf_firmware_data = ar->testmode.utf->data;
+	ar->testmode.utf_firmware_len = ar->testmode.utf->size;
+
+	return 0;
+}
+
+static int ath10k_tm_fetch_firmware(struct ath10k *ar)
+{
+	int ret;
+
+	ret = ath10k_tm_fetch_utf_firmware_api_2(ar);
+	if (ret == 0) {
+		ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode using fw utf api 2");
+		return 0;
+	}
+
+	ret = ath10k_tm_fetch_utf_firmware_api_1(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to fetch utf firmware binary: %d", ret);
+		return ret;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode using utf api 1");
+
+	return 0;
+}
+
+static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
+{
+	const char *ver;
+	int ret;
+
 	ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode cmd utf start\n");
 
 	mutex_lock(&ar->conf_mutex);
@@ -165,36 +335,27 @@ static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
 		goto err;
 	}
 
-	snprintf(filename, sizeof(filename), "%s/%s",
-		 ar->hw_params.fw.dir, ATH10K_FW_UTF_FILE);
-
-	/* load utf firmware image */
-	ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
+	ret = ath10k_tm_fetch_firmware(ar);
 	if (ret) {
-		ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
-			    filename, ret);
+		ath10k_err(ar, "failed to fetch UTF firmware: %d", ret);
 		goto err;
 	}
 
 	spin_lock_bh(&ar->data_lock);
-
 	ar->testmode.utf_monitor = true;
-
 	spin_unlock_bh(&ar->data_lock);
-
 	BUILD_BUG_ON(sizeof(ar->fw_features) !=
 		     sizeof(ar->testmode.orig_fw_features));
 
 	memcpy(ar->testmode.orig_fw_features, ar->fw_features,
 	       sizeof(ar->fw_features));
 	ar->testmode.orig_wmi_op_version = ar->wmi.op_version;
-
-	/* utf.bin firmware image does not advertise firmware features. Do
-	 * an ugly hack where we force the firmware features so that wmi.c
-	 * will use the correct WMI interface.
-	 */
 	memset(ar->fw_features, 0, sizeof(ar->fw_features));
-	ar->wmi.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
+
+	ar->wmi.op_version = ar->testmode.op_version;
+
+	ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode wmi version %d\n",
+		   ar->wmi.op_version);
 
 	ret = ath10k_hif_power_up(ar);
 	if (ret) {
@@ -212,7 +373,12 @@ static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
 
 	ar->state = ATH10K_STATE_UTF;
 
-	ath10k_info(ar, "UTF firmware started\n");
+	if (strlen(ar->testmode.utf_version) > 0)
+		ver = ar->testmode.utf_version;
+	else
+		ver = "API 1";
+
+	ath10k_info(ar, "UTF firmware %s started\n", ver);
 
 	mutex_unlock(&ar->conf_mutex);
 

drivers/net/wireless/ath/ath10k/wmi-tlv.c

@@ -23,6 +23,7 @@
 #include "wmi-ops.h"
 #include "wmi-tlv.h"
 #include "p2p.h"
+#include "testmode.h"
 
 /***************/
 /* TLV helpers */
@@ -419,6 +420,7 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct wmi_cmd_hdr *cmd_hdr;
 	enum wmi_tlv_event_id id;
+	bool consumed;
 
 	cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
 	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
@@ -428,6 +430,18 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 
 	trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
 
+	consumed = ath10k_tm_event_wmi(ar, id, skb);
+
+	/* Ready event must be handled normally also in UTF mode so that we
+	 * know the UTF firmware has booted, others we are just bypass WMI
+	 * events to testmode.
+	 */
+	if (consumed && id != WMI_TLV_READY_EVENTID) {
+		ath10k_dbg(ar, ATH10K_DBG_WMI,
+			   "wmi tlv testmode consumed 0x%x\n", id);
+		goto out;
+	}
+
 	switch (id) {
 	case WMI_TLV_MGMT_RX_EVENTID:
 		ath10k_wmi_event_mgmt_rx(ar, skb);