Merge branch 'topic/atomic-conversion' into drm-intel-next-queued

The i915 atomic conversion is a real beast and it's not getting easier
wrangling in a separate branch. I'm might be regretting this, but
right after vacation nothing can burst my little bubble here!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drivers/gpu/drm/i915/i915_debugfs.c

@@ -2783,13 +2783,16 @@ static int i915_display_info(struct seq_file *m, void *unused)
 	seq_printf(m, "---------\n");
 	for_each_intel_crtc(dev, crtc) {
 		bool active;
+		struct intel_crtc_state *pipe_config;
 		int x, y;
 
+		pipe_config = to_intel_crtc_state(crtc->base.state);
+
 		seq_printf(m, "CRTC %d: pipe: %c, active=%s (size=%dx%d)\n",
 			   crtc->base.base.id, pipe_name(crtc->pipe),
-			   yesno(crtc->active), crtc->config->pipe_src_w,
-			   crtc->config->pipe_src_h);
-		if (crtc->active) {
+			   yesno(pipe_config->base.active),
+			   pipe_config->pipe_src_w, pipe_config->pipe_src_h);
+		if (pipe_config->base.active) {
 			intel_crtc_info(m, crtc);
 
 			active = cursor_position(dev, crtc->pipe, &x, &y);
@@ -3030,7 +3033,7 @@ static void drrs_status_per_crtc(struct seq_file *m,
 
 	seq_puts(m, "\n\n");
 
-	if (intel_crtc->config->has_drrs) {
+	if (to_intel_crtc_state(intel_crtc->base.state)->has_drrs) {
 		struct intel_panel *panel;
 
 		mutex_lock(&drrs->mutex);
@@ -3082,7 +3085,7 @@ static int i915_drrs_status(struct seq_file *m, void *unused)
 	for_each_intel_crtc(dev, intel_crtc) {
 		drm_modeset_lock(&intel_crtc->base.mutex, NULL);
 
-		if (intel_crtc->active) {
+		if (intel_crtc->base.state->active) {
 			active_crtc_cnt++;
 			seq_printf(m, "\nCRTC %d:  ", active_crtc_cnt);
 
@@ -3624,22 +3627,33 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *crtc =
 		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
+	struct intel_crtc_state *pipe_config;
 
 	drm_modeset_lock_all(dev);
+	pipe_config = to_intel_crtc_state(crtc->base.state);
+
 	/*
 	 * If we use the eDP transcoder we need to make sure that we don't
 	 * bypass the pfit, since otherwise the pipe CRC source won't work. Only
 	 * relevant on hsw with pipe A when using the always-on power well
 	 * routing.
 	 */
-	if (crtc->config->cpu_transcoder == TRANSCODER_EDP &&
-	    !crtc->config->pch_pfit.enabled) {
-		crtc->config->pch_pfit.force_thru = true;
+	if (pipe_config->cpu_transcoder == TRANSCODER_EDP &&
+	    !pipe_config->pch_pfit.enabled) {
+		bool active = pipe_config->base.active;
+
+		if (active) {
+			intel_crtc_control(&crtc->base, false);
+			pipe_config = to_intel_crtc_state(crtc->base.state);
+		}
+
+		pipe_config->pch_pfit.force_thru = true;
 
 		intel_display_power_get(dev_priv,
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
 
-		intel_crtc_reset(crtc);
+		if (active)
+			intel_crtc_control(&crtc->base, true);
 	}
 	drm_modeset_unlock_all(dev);
 }
@@ -3649,6 +3663,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *crtc =
 		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
+	struct intel_crtc_state *pipe_config;
 
 	drm_modeset_lock_all(dev);
 	/*
@@ -3657,13 +3672,22 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 	 * relevant on hsw with pipe A when using the always-on power well
 	 * routing.
 	 */
-	if (crtc->config->pch_pfit.force_thru) {
-		crtc->config->pch_pfit.force_thru = false;
+	pipe_config = to_intel_crtc_state(crtc->base.state);
+	if (pipe_config->pch_pfit.force_thru) {
+		bool active = pipe_config->base.active;
+
+		if (active) {
+			intel_crtc_control(&crtc->base, false);
+			pipe_config = to_intel_crtc_state(crtc->base.state);
+		}
 
-		intel_crtc_reset(crtc);
+		pipe_config->pch_pfit.force_thru = false;
 
 		intel_display_power_put(dev_priv,
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+
+		if (active)
+			intel_crtc_control(&crtc->base, true);
 	}
 	drm_modeset_unlock_all(dev);
 }
@@ -3779,7 +3803,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 				 pipe_name(pipe));
 
 		drm_modeset_lock(&crtc->base.mutex, NULL);
-		if (crtc->active)
+		if (crtc->base.state->active)
 			intel_wait_for_vblank(dev, pipe);
 		drm_modeset_unlock(&crtc->base.mutex);
 

drivers/gpu/drm/i915/i915_drv.c

@@ -601,7 +601,6 @@ static int bxt_resume_prepare(struct drm_i915_private *dev_priv);
 static int i915_drm_suspend(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc;
 	pci_power_t opregion_target_state;
 	int error;
 
@@ -632,8 +631,7 @@ static int i915_drm_suspend(struct drm_device *dev)
 	 * for _thaw. Also, power gate the CRTC power wells.
 	 */
 	drm_modeset_lock_all(dev);
-	for_each_crtc(dev, crtc)
-		intel_crtc_control(crtc, false);
+	intel_display_suspend(dev);
 	drm_modeset_unlock_all(dev);
 
 	intel_dp_mst_suspend(dev);

drivers/gpu/drm/i915/i915_drv.h

@@ -376,7 +376,6 @@ struct intel_shared_dpll_config {
 
 struct intel_shared_dpll {
 	struct intel_shared_dpll_config config;
-	struct intel_shared_dpll_config *new_config;
 
 	int active; /* count of number of active CRTCs (i.e. DPMS on) */
 	bool on; /* is the PLL actually active? Disabled during modeset */
@@ -631,7 +630,6 @@ struct drm_i915_display_funcs {
 				  struct intel_crtc_state *crtc_state);
 	void (*crtc_enable)(struct drm_crtc *crtc);
 	void (*crtc_disable)(struct drm_crtc *crtc);
-	void (*off)(struct drm_crtc *crtc);
 	void (*audio_codec_enable)(struct drm_connector *connector,
 				   struct intel_encoder *encoder,
 				   struct drm_display_mode *mode);

drivers/gpu/drm/i915/i915_irq.c

@@ -564,8 +564,7 @@ static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
 	u32 high1, high2, low, pixel, vbl_start, hsync_start, htotal;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
-	const struct drm_display_mode *mode =
-		&intel_crtc->config->base.adjusted_mode;
+	const struct drm_display_mode *mode = &intel_crtc->base.hwmode;
 
 	htotal = mode->crtc_htotal;
 	hsync_start = mode->crtc_hsync_start;
@@ -620,7 +619,7 @@ static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	const struct drm_display_mode *mode = &crtc->config->base.adjusted_mode;
+	const struct drm_display_mode *mode = &crtc->base.hwmode;
 	enum pipe pipe = crtc->pipe;
 	int position, vtotal;
 
@@ -647,14 +646,14 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	const struct drm_display_mode *mode = &intel_crtc->config->base.adjusted_mode;
+	const struct drm_display_mode *mode = &intel_crtc->base.hwmode;
 	int position;
 	int vbl_start, vbl_end, hsync_start, htotal, vtotal;
 	bool in_vbl = true;
 	int ret = 0;
 	unsigned long irqflags;
 
-	if (!intel_crtc->active) {
+	if (WARN_ON(!mode->crtc_clock)) {
 		DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
 				 "pipe %c\n", pipe_name(pipe));
 		return 0;
@@ -796,7 +795,7 @@ static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
 		return -EINVAL;
 	}
 
-	if (!crtc->state->enable) {
+	if (!crtc->hwmode.crtc_clock) {
 		DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
 		return -EBUSY;
 	}
@@ -805,7 +804,7 @@ static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
 	return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
 						     vblank_time, flags,
 						     crtc,
-						     &to_intel_crtc(crtc)->config->base.adjusted_mode);
+						     &crtc->hwmode);
 }
 
 static bool intel_hpd_irq_event(struct drm_device *dev,

drivers/gpu/drm/i915/intel_atomic.c

@@ -129,6 +129,8 @@ int intel_atomic_commit(struct drm_device *dev,
 			struct drm_atomic_state *state,
 			bool async)
 {
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
 	int ret;
 	int i;
 
@@ -142,48 +144,19 @@ int intel_atomic_commit(struct drm_device *dev,
 		return ret;
 
 	/* Point of no return */
+	drm_atomic_helper_swap_state(dev, state);
 
-	/*
-	 * FIXME:  The proper sequence here will eventually be:
-	 *
-	 * drm_atomic_helper_swap_state(dev, state)
-	 * drm_atomic_helper_commit_modeset_disables(dev, state);
-	 * drm_atomic_helper_commit_planes(dev, state);
-	 * drm_atomic_helper_commit_modeset_enables(dev, state);
-	 * drm_atomic_helper_wait_for_vblanks(dev, state);
-	 * drm_atomic_helper_cleanup_planes(dev, state);
-	 * drm_atomic_state_free(state);
-	 *
-	 * once we have full atomic modeset.  For now, just manually update
-	 * plane states to avoid clobbering good states with dummy states
-	 * while nuclear pageflipping.
-	 */
-	for (i = 0; i < dev->mode_config.num_total_plane; i++) {
-		struct drm_plane *plane = state->planes[i];
-
-		if (!plane)
-			continue;
-
-		plane->state->state = state;
-		swap(state->plane_states[i], plane->state);
-		plane->state->state = NULL;
-	}
-
-	/* swap crtc_scaler_state */
-	for (i = 0; i < dev->mode_config.num_crtc; i++) {
-		struct drm_crtc *crtc = state->crtcs[i];
-		if (!crtc) {
-			continue;
-		}
-
-		to_intel_crtc(crtc)->config->scaler_state =
-			to_intel_crtc_state(state->crtc_states[i])->scaler_state;
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
 
 		if (INTEL_INFO(dev)->gen >= 9)
 			skl_detach_scalers(to_intel_crtc(crtc));
+
+		drm_atomic_helper_commit_planes_on_crtc(crtc_state);
 	}
 
-	drm_atomic_helper_commit_planes(dev, state);
+	/* FIXME: This function should eventually call __intel_set_mode when needed */
+
 	drm_atomic_helper_wait_for_vblanks(dev, state);
 	drm_atomic_helper_cleanup_planes(dev, state);
 	drm_atomic_state_free(state);
@@ -421,3 +394,54 @@ int intel_atomic_setup_scalers(struct drm_device *dev,
 
 	return 0;
 }
+
+static void
+intel_atomic_duplicate_dpll_state(struct drm_i915_private *dev_priv,
+				  struct intel_shared_dpll_config *shared_dpll)
+{
+	enum intel_dpll_id i;
+
+	/* Copy shared dpll state */
+	for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+		struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
+
+		shared_dpll[i] = pll->config;
+	}
+}
+
+struct intel_shared_dpll_config *
+intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s)
+{
+	struct intel_atomic_state *state = to_intel_atomic_state(s);
+
+	WARN_ON(!drm_modeset_is_locked(&s->dev->mode_config.connection_mutex));
+
+	if (!state->dpll_set) {
+		state->dpll_set = true;
+
+		intel_atomic_duplicate_dpll_state(to_i915(s->dev),
+						  state->shared_dpll);
+	}
+
+	return state->shared_dpll;
+}
+
+struct drm_atomic_state *
+intel_atomic_state_alloc(struct drm_device *dev)
+{
+	struct intel_atomic_state *state = kzalloc(sizeof(*state), GFP_KERNEL);
+
+	if (!state || drm_atomic_state_init(dev, &state->base) < 0) {
+		kfree(state);
+		return NULL;
+	}
+
+	return &state->base;
+}
+
+void intel_atomic_state_clear(struct drm_atomic_state *s)
+{
+	struct intel_atomic_state *state = to_intel_atomic_state(s);
+	drm_atomic_state_default_clear(&state->base);
+	state->dpll_set = false;
+}

drivers/gpu/drm/i915/intel_display.c

@@ -86,8 +86,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
 				   struct intel_crtc_state *pipe_config);
 
-static int intel_set_mode(struct drm_crtc *crtc,
-			  struct drm_atomic_state *state);
+static int intel_set_mode(struct drm_atomic_state *state);
 static int intel_framebuffer_init(struct drm_device *dev,
 				  struct intel_framebuffer *ifb,
 				  struct drm_mode_fb_cmd2 *mode_cmd,
@@ -431,6 +430,12 @@ static void vlv_clock(int refclk, intel_clock_t *clock)
 	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 }
 
+static bool
+needs_modeset(struct drm_crtc_state *state)
+{
+	return state->mode_changed || state->active_changed;
+}
+
 /**
  * Returns whether any output on the specified pipe is of the specified type
  */
@@ -1693,7 +1698,7 @@ static int intel_num_dvo_pipes(struct drm_device *dev)
 	int count = 0;
 
 	for_each_intel_crtc(dev, crtc)
-		count += crtc->active &&
+		count += crtc->base.state->active &&
 			intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
 
 	return count;
@@ -1774,7 +1779,7 @@ static void i9xx_disable_pll(struct intel_crtc *crtc)
 	/* Disable DVO 2x clock on both PLLs if necessary */
 	if (IS_I830(dev) &&
 	    intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
-	    intel_num_dvo_pipes(dev) == 1) {
+	    !intel_num_dvo_pipes(dev)) {
 		I915_WRITE(DPLL(PIPE_B),
 			   I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
 		I915_WRITE(DPLL(PIPE_A),
@@ -2630,9 +2635,9 @@ valid_fb:
 		dev_priv->preserve_bios_swizzle = true;
 
 	primary->fb = fb;
-	primary->state->crtc = &intel_crtc->base;
-	primary->crtc = &intel_crtc->base;
+	primary->crtc = primary->state->crtc = &intel_crtc->base;
 	update_state_fb(primary);
+	intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
 	obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
 }
 
@@ -3179,24 +3184,8 @@ static void intel_update_primary_planes(struct drm_device *dev)
 	}
 }
 
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
-	if (!crtc->active)
-		return;
-
-	intel_crtc_disable_planes(&crtc->base);
-	dev_priv->display.crtc_disable(&crtc->base);
-	dev_priv->display.crtc_enable(&crtc->base);
-	intel_crtc_enable_planes(&crtc->base);
-}
-
 void intel_prepare_reset(struct drm_device *dev)
 {
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct intel_crtc *crtc;
-
 	/* no reset support for gen2 */
 	if (IS_GEN2(dev))
 		return;
@@ -3206,18 +3195,11 @@ void intel_prepare_reset(struct drm_device *dev)
 		return;
 
 	drm_modeset_lock_all(dev);
-
 	/*
 	 * Disabling the crtcs gracefully seems nicer. Also the
 	 * g33 docs say we should at least disable all the planes.
 	 */
-	for_each_intel_crtc(dev, crtc) {
-		if (!crtc->active)
-			continue;
-
-		intel_crtc_disable_planes(&crtc->base);
-		dev_priv->display.crtc_disable(&crtc->base);
-	}
+	intel_display_suspend(dev);
 }
 
 void intel_finish_reset(struct drm_device *dev)
@@ -4203,34 +4185,16 @@ static void lpt_pch_enable(struct drm_crtc *crtc)
 	lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
 }
 
-void intel_put_shared_dpll(struct intel_crtc *crtc)
-{
-	struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
-	if (pll == NULL)
-		return;
-
-	if (!(pll->config.crtc_mask & (1 << crtc->pipe))) {
-		WARN(1, "bad %s crtc mask\n", pll->name);
-		return;
-	}
-
-	pll->config.crtc_mask &= ~(1 << crtc->pipe);
-	if (pll->config.crtc_mask == 0) {
-		WARN_ON(pll->on);
-		WARN_ON(pll->active);
-	}
-
-	crtc->config->shared_dpll = DPLL_ID_PRIVATE;
-}
-
 struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
 						struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
 	struct intel_shared_dpll *pll;
+	struct intel_shared_dpll_config *shared_dpll;
 	enum intel_dpll_id i;
 
+	shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
+
 	if (HAS_PCH_IBX(dev_priv->dev)) {
 		/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
 		i = (enum intel_dpll_id) crtc->pipe;
@@ -4239,7 +4203,7 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
 		DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
 			      crtc->base.base.id, pll->name);
 
-		WARN_ON(pll->new_config->crtc_mask);
+		WARN_ON(shared_dpll[i].crtc_mask);
 
 		goto found;
 	}
@@ -4259,7 +4223,7 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
 		pll = &dev_priv->shared_dplls[i];
 		DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
 			crtc->base.base.id, pll->name);
-		WARN_ON(pll->new_config->crtc_mask);
+		WARN_ON(shared_dpll[i].crtc_mask);
 
 		goto found;
 	}
@@ -4268,15 +4232,15 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
 		pll = &dev_priv->shared_dplls[i];
 
 		/* Only want to check enabled timings first */
-		if (pll->new_config->crtc_mask == 0)
+		if (shared_dpll[i].crtc_mask == 0)
 			continue;
 
 		if (memcmp(&crtc_state->dpll_hw_state,
-			   &pll->new_config->hw_state,
-			   sizeof(pll->new_config->hw_state)) == 0) {
+			   &shared_dpll[i].hw_state,
+			   sizeof(crtc_state->dpll_hw_state)) == 0) {
 			DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
 				      crtc->base.base.id, pll->name,
-				      pll->new_config->crtc_mask,
+				      shared_dpll[i].crtc_mask,
 				      pll->active);
 			goto found;
 		}
@@ -4285,7 +4249,7 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
 	/* Ok no matching timings, maybe there's a free one? */
 	for (i = 0; i < dev_priv->num_shared_dpll; i++) {
 		pll = &dev_priv->shared_dplls[i];
-		if (pll->new_config->crtc_mask == 0) {
+		if (shared_dpll[i].crtc_mask == 0) {
 			DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
 				      crtc->base.base.id, pll->name);
 			goto found;
@@ -4295,83 +4259,33 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
 	return NULL;
 
 found:
-	if (pll->new_config->crtc_mask == 0)
-		pll->new_config->hw_state = crtc_state->dpll_hw_state;
+	if (shared_dpll[i].crtc_mask == 0)
+		shared_dpll[i].hw_state =
+			crtc_state->dpll_hw_state;
 
 	crtc_state->shared_dpll = i;
 	DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
 			 pipe_name(crtc->pipe));
 
-	pll->new_config->crtc_mask |= 1 << crtc->pipe;
+	shared_dpll[i].crtc_mask |= 1 << crtc->pipe;
 
 	return pll;
 }
 
-/**
- * intel_shared_dpll_start_config - start a new PLL staged config
- * @dev_priv: DRM device
- * @clear_pipes: mask of pipes that will have their PLLs freed
- *
- * Starts a new PLL staged config, copying the current config but
- * releasing the references of pipes specified in clear_pipes.
- */
-static int intel_shared_dpll_start_config(struct drm_i915_private *dev_priv,
-					  unsigned clear_pipes)
-{
-	struct intel_shared_dpll *pll;
-	enum intel_dpll_id i;
-
-	for (i = 0; i < dev_priv->num_shared_dpll; i++) {
-		pll = &dev_priv->shared_dplls[i];
-
-		pll->new_config = kmemdup(&pll->config, sizeof pll->config,
-					  GFP_KERNEL);
-		if (!pll->new_config)
-			goto cleanup;
-
-		pll->new_config->crtc_mask &= ~clear_pipes;
-	}
-
-	return 0;
-
-cleanup:
-	while (--i >= 0) {
-		pll = &dev_priv->shared_dplls[i];
-		kfree(pll->new_config);
-		pll->new_config = NULL;
-	}
-
-	return -ENOMEM;
-}
-
-static void intel_shared_dpll_commit(struct drm_i915_private *dev_priv)
+static void intel_shared_dpll_commit(struct drm_atomic_state *state)
 {
+	struct drm_i915_private *dev_priv = to_i915(state->dev);
+	struct intel_shared_dpll_config *shared_dpll;
 	struct intel_shared_dpll *pll;
 	enum intel_dpll_id i;
 
-	for (i = 0; i < dev_priv->num_shared_dpll; i++) {
-		pll = &dev_priv->shared_dplls[i];
-
-		WARN_ON(pll->new_config == &pll->config);
-
-		pll->config = *pll->new_config;
-		kfree(pll->new_config);
-		pll->new_config = NULL;
-	}
-}
-
-static void intel_shared_dpll_abort_config(struct drm_i915_private *dev_priv)
-{
-	struct intel_shared_dpll *pll;
-	enum intel_dpll_id i;
+	if (!to_intel_atomic_state(state)->dpll_set)
+		return;
 
+	shared_dpll = to_intel_atomic_state(state)->shared_dpll;
 	for (i = 0; i < dev_priv->num_shared_dpll; i++) {
 		pll = &dev_priv->shared_dplls[i];
-
-		WARN_ON(pll->new_config == &pll->config);
-
-		kfree(pll->new_config);
-		pll->new_config = NULL;
+		pll->config = shared_dpll[i];
 	}
 }
 
@@ -4671,7 +4585,7 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc)
 	bool reenable_ips = false;
 
 	/* The clocks have to be on to load the palette. */
-	if (!crtc->state->enable || !intel_crtc->active)
+	if (!crtc->state->active)
 		return;
 
 	if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
@@ -4838,7 +4752,8 @@ static void intel_crtc_enable_planes(struct drm_crtc *crtc)
 
 	intel_enable_primary_hw_plane(crtc->primary, crtc);
 	intel_enable_sprite_planes(crtc);
-	intel_crtc_update_cursor(crtc, true);
+	if (to_intel_plane_state(crtc->cursor->state)->visible)
+		intel_crtc_update_cursor(crtc, true);
 
 	intel_post_enable_primary(crtc);
 
@@ -4887,9 +4802,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 
-	WARN_ON(!crtc->state->enable);
-
-	if (intel_crtc->active)
+	if (WARN_ON(intel_crtc->active))
 		return;
 
 	if (intel_crtc->config->has_pch_encoder)
@@ -4956,46 +4869,17 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
 	return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
 }
 
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
-	/* We want to get the other_active_crtc only if there's only 1 other
-	 * active crtc. */
-	for_each_intel_crtc(dev, crtc_it) {
-		if (!crtc_it->active || crtc_it == crtc)
-			continue;
-
-		if (other_active_crtc)
-			return;
-
-		other_active_crtc = crtc_it;
-	}
-	if (!other_active_crtc)
-		return;
-
-	intel_wait_for_vblank(dev, other_active_crtc->pipe);
-	intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
 static void haswell_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
-	int pipe = intel_crtc->pipe;
-
-	WARN_ON(!crtc->state->enable);
+	int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+	struct intel_crtc_state *pipe_config =
+		to_intel_crtc_state(crtc->state);
 
-	if (intel_crtc->active)
+	if (WARN_ON(intel_crtc->active))
 		return;
 
 	if (intel_crtc_to_shared_dpll(intel_crtc))
@@ -5070,7 +4954,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
-	haswell_mode_set_planes_workaround(intel_crtc);
+	hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+	if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+		intel_wait_for_vblank(dev, hsw_workaround_pipe);
+		intel_wait_for_vblank(dev, hsw_workaround_pipe);
+	}
 }
 
 static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -5097,7 +4985,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 	int pipe = intel_crtc->pipe;
 	u32 reg, temp;
 
-	if (!intel_crtc->active)
+	if (WARN_ON(!intel_crtc->active))
 		return;
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
@@ -5160,7 +5048,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
 
-	if (!intel_crtc->active)
+	if (WARN_ON(!intel_crtc->active))
 		return;
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
@@ -5210,13 +5098,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 		intel_disable_shared_dpll(intel_crtc);
 }
 
-static void ironlake_crtc_off(struct drm_crtc *crtc)
-{
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	intel_put_shared_dpll(intel_crtc);
-}
-
-
 static void i9xx_pfit_enable(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -6012,7 +5893,7 @@ static int valleyview_modeset_global_pipes(struct drm_atomic_state *state)
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *crtc_state;
 	int max_pixclk = intel_mode_max_pixclk(state->dev, state);
-	int cdclk, i;
+	int cdclk, ret = 0;
 
 	if (max_pixclk < 0)
 		return max_pixclk;
@@ -6027,20 +5908,25 @@ static int valleyview_modeset_global_pipes(struct drm_atomic_state *state)
 
 	/* add all active pipes to the state */
 	for_each_crtc(state->dev, crtc) {
-		if (!crtc->state->enable)
-			continue;
-
 		crtc_state = drm_atomic_get_crtc_state(state, crtc);
 		if (IS_ERR(crtc_state))
 			return PTR_ERR(crtc_state);
-	}
 
-	/* disable/enable all currently active pipes while we change cdclk */
-	for_each_crtc_in_state(state, crtc, crtc_state, i)
-		if (crtc_state->enable)
-			crtc_state->mode_changed = true;
+		if (!crtc_state->active || needs_modeset(crtc_state))
+			continue;
 
-	return 0;
+		crtc_state->mode_changed = true;
+
+		ret = drm_atomic_add_affected_connectors(state, crtc);
+		if (ret)
+			break;
+
+		ret = drm_atomic_add_affected_planes(state, crtc);
+		if (ret)
+			break;
+	}
+
+	return ret;
 }
 
 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
@@ -6125,9 +6011,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 	int pipe = intel_crtc->pipe;
 	bool is_dsi;
 
-	WARN_ON(!crtc->state->enable);
-
-	if (intel_crtc->active)
+	if (WARN_ON(intel_crtc->active))
 		return;
 
 	is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
@@ -6203,9 +6087,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 
-	WARN_ON(!crtc->state->enable);
-
-	if (intel_crtc->active)
+	if (WARN_ON(intel_crtc->active))
 		return;
 
 	i9xx_set_pll_dividers(intel_crtc);
@@ -6265,7 +6147,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 
-	if (!intel_crtc->active)
+	if (WARN_ON(!intel_crtc->active))
 		return;
 
 	/*
@@ -6310,40 +6192,81 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	mutex_unlock(&dev->struct_mutex);
 }
 
-static void i9xx_crtc_off(struct drm_crtc *crtc)
+static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
+	enum intel_display_power_domain domain;
+	unsigned long domains;
+
+	if (!intel_crtc->active)
+		return;
+
+	intel_crtc_disable_planes(crtc);
+	dev_priv->display.crtc_disable(crtc);
+
+	domains = intel_crtc->enabled_power_domains;
+	for_each_power_domain(domain, domains)
+		intel_display_power_put(dev_priv, domain);
+	intel_crtc->enabled_power_domains = 0;
+}
+
+/*
+ * turn all crtc's off, but do not adjust state
+ * This has to be paired with a call to intel_modeset_setup_hw_state.
+ */
+void intel_display_suspend(struct drm_device *dev)
 {
+	struct drm_crtc *crtc;
+
+	for_each_crtc(dev, crtc)
+		intel_crtc_disable_noatomic(crtc);
 }
 
 /* Master function to enable/disable CRTC and corresponding power wells */
-void intel_crtc_control(struct drm_crtc *crtc, bool enable)
+int intel_crtc_control(struct drm_crtc *crtc, bool enable)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mode_config *config = &dev->mode_config;
+	struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	enum intel_display_power_domain domain;
-	unsigned long domains;
+	struct intel_crtc_state *pipe_config;
+	struct drm_atomic_state *state;
+	int ret;
 
-	if (enable) {
-		if (!intel_crtc->active) {
-			domains = get_crtc_power_domains(crtc);
-			for_each_power_domain(domain, domains)
-				intel_display_power_get(dev_priv, domain);
-			intel_crtc->enabled_power_domains = domains;
+	if (enable == intel_crtc->active)
+		return 0;
 
-			dev_priv->display.crtc_enable(crtc);
-			intel_crtc_enable_planes(crtc);
-		}
-	} else {
-		if (intel_crtc->active) {
-			intel_crtc_disable_planes(crtc);
-			dev_priv->display.crtc_disable(crtc);
+	if (enable && !crtc->state->enable)
+		return 0;
 
-			domains = intel_crtc->enabled_power_domains;
-			for_each_power_domain(domain, domains)
-				intel_display_power_put(dev_priv, domain);
-			intel_crtc->enabled_power_domains = 0;
-		}
+	/* this function should be called with drm_modeset_lock_all for now */
+	if (WARN_ON(!ctx))
+		return -EIO;
+	lockdep_assert_held(&ctx->ww_ctx);
+
+	state = drm_atomic_state_alloc(dev);
+	if (WARN_ON(!state))
+		return -ENOMEM;
+
+	state->acquire_ctx = ctx;
+	state->allow_modeset = true;
+
+	pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+	if (IS_ERR(pipe_config)) {
+		ret = PTR_ERR(pipe_config);
+		goto err;
 	}
+	pipe_config->base.active = enable;
+
+	ret = intel_set_mode(state);
+	if (!ret)
+		return ret;
+
+err:
+	DRM_ERROR("Updating crtc active failed with %i\n", ret);
+	drm_atomic_state_free(state);
+	return ret;
 }
 
 /**
@@ -6359,36 +6282,6 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
 		enable |= intel_encoder->connectors_active;
 
 	intel_crtc_control(crtc, enable);
-
-	crtc->state->active = enable;
-}
-
-static void intel_crtc_disable(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_connector *connector;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	/* crtc should still be enabled when we disable it. */
-	WARN_ON(!crtc->state->enable);
-
-	intel_crtc_disable_planes(crtc);
-	dev_priv->display.crtc_disable(crtc);
-	dev_priv->display.off(crtc);
-
-	drm_plane_helper_disable(crtc->primary);
-
-	/* Update computed state. */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		if (!connector->encoder || !connector->encoder->crtc)
-			continue;
-
-		if (connector->encoder->crtc != crtc)
-			continue;
-
-		connector->dpms = DRM_MODE_DPMS_OFF;
-		to_intel_encoder(connector->encoder)->connectors_active = false;
-	}
 }
 
 void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -10538,7 +10431,7 @@ retry:
 
 	drm_mode_copy(&crtc_state->base.mode, mode);
 
-	if (intel_set_mode(crtc, state)) {
+	if (intel_set_mode(state)) {
 		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
 		if (old->release_fb)
 			old->release_fb->funcs->destroy(old->release_fb);
@@ -10612,7 +10505,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
 		if (ret)
 			goto fail;
 
-		ret = intel_set_mode(crtc, state);
+		ret = intel_set_mode(state);
 		if (ret)
 			goto fail;
 
@@ -11730,8 +11623,35 @@ free_work:
 	kfree(work);
 
 	if (ret == -EIO) {
+		struct drm_atomic_state *state;
+		struct drm_plane_state *plane_state;
+
 out_hang:
-		ret = intel_plane_restore(primary);
+		state = drm_atomic_state_alloc(dev);
+		if (!state)
+			return -ENOMEM;
+		state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
+
+retry:
+		plane_state = drm_atomic_get_plane_state(state, primary);
+		ret = PTR_ERR_OR_ZERO(plane_state);
+		if (!ret) {
+			drm_atomic_set_fb_for_plane(plane_state, fb);
+
+			ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
+			if (!ret)
+				ret = drm_atomic_commit(state);
+		}
+
+		if (ret == -EDEADLK) {
+			drm_modeset_backoff(state->acquire_ctx);
+			drm_atomic_state_clear(state);
+			goto retry;
+		}
+
+		if (ret)
+			drm_atomic_state_free(state);
+
 		if (ret == 0 && event) {
 			spin_lock_irq(&dev->event_lock);
 			drm_send_vblank_event(dev, pipe, event);
@@ -11796,43 +11716,6 @@ static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
 	}
 }
 
-/* Fixup legacy state after an atomic state swap.
- */
-static void intel_modeset_fixup_state(struct drm_atomic_state *state)
-{
-	struct intel_crtc *crtc;
-	struct intel_encoder *encoder;
-	struct intel_connector *connector;
-
-	for_each_intel_connector(state->dev, connector) {
-		connector->base.encoder = connector->base.state->best_encoder;
-		if (connector->base.encoder)
-			connector->base.encoder->crtc =
-				connector->base.state->crtc;
-	}
-
-	/* Update crtc of disabled encoders */
-	for_each_intel_encoder(state->dev, encoder) {
-		int num_connectors = 0;
-
-		for_each_intel_connector(state->dev, connector)
-			if (connector->base.encoder == &encoder->base)
-				num_connectors++;
-
-		if (num_connectors == 0)
-			encoder->base.crtc = NULL;
-	}
-
-	for_each_intel_crtc(state->dev, crtc) {
-		crtc->base.enabled = crtc->base.state->enable;
-		crtc->config = to_intel_crtc_state(crtc->base.state);
-	}
-
-	/* Copy the new configuration to the staged state, to keep the few
-	 * pieces of code that haven't been converted yet happy */
-	intel_modeset_update_staged_output_state(state->dev);
-}
-
 static void
 connected_sink_compute_bpp(struct intel_connector *connector,
 			   struct intel_crtc_state *pipe_config)
@@ -12161,9 +12044,10 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
 
 static int
 intel_modeset_pipe_config(struct drm_crtc *crtc,
-			  struct drm_atomic_state *state,
-			  struct intel_crtc_state *pipe_config)
+			  struct drm_atomic_state *state)
 {
+	struct drm_crtc_state *crtc_state;
+	struct intel_crtc_state *pipe_config;
 	struct intel_encoder *encoder;
 	struct drm_connector *connector;
 	struct drm_connector_state *connector_state;
@@ -12181,6 +12065,21 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
+	crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+	if (WARN_ON(!crtc_state))
+		return -EINVAL;
+
+	pipe_config = to_intel_crtc_state(crtc_state);
+
+	/*
+	 * XXX: Add all connectors to make the crtc state match the encoders.
+	 */
+	if (!needs_modeset(&pipe_config->base)) {
+		ret = drm_atomic_add_affected_connectors(state, crtc);
+		if (ret)
+			return ret;
+	}
+
 	clear_intel_crtc_state(pipe_config);
 
 	pipe_config->cpu_transcoder =
@@ -12272,7 +12171,19 @@ encoder_retry:
 	DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
 		      base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
 
-	return 0;
+	/* Check if we need to force a modeset */
+	if (pipe_config->has_audio !=
+	    to_intel_crtc_state(crtc->state)->has_audio) {
+		pipe_config->base.mode_changed = true;
+		ret = drm_atomic_add_affected_planes(state, crtc);
+	}
+
+	/*
+	 * Note we have an issue here with infoframes: current code
+	 * only updates them on the full mode set path per hw
+	 * requirements.  So here we should be checking for any
+	 * required changes and forcing a mode set.
+	 */
 fail:
 	return ret;
 }
@@ -12289,73 +12200,66 @@ static bool intel_crtc_in_use(struct drm_crtc *crtc)
 	return false;
 }
 
-static bool
-needs_modeset(struct drm_crtc_state *state)
-{
-	return state->mode_changed || state->active_changed;
-}
-
 static void
 intel_modeset_update_state(struct drm_atomic_state *state)
 {
 	struct drm_device *dev = state->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *intel_encoder;
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *crtc_state;
 	struct drm_connector *connector;
-	int i;
 
-	intel_shared_dpll_commit(dev_priv);
+	intel_shared_dpll_commit(state);
 
 	for_each_intel_encoder(dev, intel_encoder) {
 		if (!intel_encoder->base.crtc)
 			continue;
 
-		for_each_crtc_in_state(state, crtc, crtc_state, i) {
-			if (crtc != intel_encoder->base.crtc)
-				continue;
-
-			if (crtc_state->enable && needs_modeset(crtc_state))
-				intel_encoder->connectors_active = false;
+		crtc = intel_encoder->base.crtc;
+		crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+		if (!crtc_state || !needs_modeset(crtc->state))
+			continue;
 
-			break;
-		}
+		intel_encoder->connectors_active = false;
 	}
 
-	drm_atomic_helper_swap_state(state->dev, state);
-	intel_modeset_fixup_state(state);
+	drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
+	intel_modeset_update_staged_output_state(state->dev);
 
 	/* Double check state. */
 	for_each_crtc(dev, crtc) {
 		WARN_ON(crtc->state->enable != intel_crtc_in_use(crtc));
+
+		to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
+
+		/* Update hwmode for vblank functions */
+		if (crtc->state->active)
+			crtc->hwmode = crtc->state->adjusted_mode;
+		else
+			crtc->hwmode.crtc_clock = 0;
 	}
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		if (!connector->encoder || !connector->encoder->crtc)
 			continue;
 
-		for_each_crtc_in_state(state, crtc, crtc_state, i) {
-			if (crtc != connector->encoder->crtc)
-				continue;
-
-			if (crtc->state->enable && needs_modeset(crtc->state)) {
-				struct drm_property *dpms_property =
-					dev->mode_config.dpms_property;
+		crtc = connector->encoder->crtc;
+		crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+		if (!crtc_state || !needs_modeset(crtc->state))
+			continue;
 
-				connector->dpms = DRM_MODE_DPMS_ON;
-				drm_object_property_set_value(&connector->base,
-								 dpms_property,
-								 DRM_MODE_DPMS_ON);
+		if (crtc->state->active) {
+			struct drm_property *dpms_property =
+				dev->mode_config.dpms_property;
 
-				intel_encoder = to_intel_encoder(connector->encoder);
-				intel_encoder->connectors_active = true;
-			}
+			connector->dpms = DRM_MODE_DPMS_ON;
+			drm_object_property_set_value(&connector->base, dpms_property, DRM_MODE_DPMS_ON);
 
-			break;
-		}
+			intel_encoder = to_intel_encoder(connector->encoder);
+			intel_encoder->connectors_active = true;
+		} else
+			connector->dpms = DRM_MODE_DPMS_OFF;
 	}
-
 }
 
 static bool intel_fuzzy_clock_check(int clock1, int clock2)
@@ -12759,6 +12663,10 @@ check_crtc_state(struct drm_device *dev)
 		     "crtc active state doesn't match with hw state "
 		     "(expected %i, found %i)\n", crtc->active, active);
 
+		I915_STATE_WARN(crtc->active != crtc->base.state->active,
+		     "transitional active state does not match atomic hw state "
+		     "(expected %i, found %i)\n", crtc->base.state->active, crtc->active);
+
 		if (active &&
 		    !intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
 			I915_STATE_WARN(1, "pipe state doesn't match!\n");
@@ -12879,60 +12787,7 @@ static void update_scanline_offset(struct intel_crtc *crtc)
 		crtc->scanline_offset = 1;
 }
 
-static struct intel_crtc_state *
-intel_modeset_compute_config(struct drm_crtc *crtc,
-			     struct drm_atomic_state *state)
-{
-	struct intel_crtc_state *pipe_config;
-	int ret = 0;
-
-	ret = drm_atomic_add_affected_connectors(state, crtc);
-	if (ret)
-		return ERR_PTR(ret);
-
-	ret = drm_atomic_helper_check_modeset(state->dev, state);
-	if (ret)
-		return ERR_PTR(ret);
-
-	/*
-	 * Note this needs changes when we start tracking multiple modes
-	 * and crtcs.  At that point we'll need to compute the whole config
-	 * (i.e. one pipe_config for each crtc) rather than just the one
-	 * for this crtc.
-	 */
-	pipe_config = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc));
-	if (IS_ERR(pipe_config))
-		return pipe_config;
-
-	if (!pipe_config->base.enable)
-		return pipe_config;
-
-	ret = intel_modeset_pipe_config(crtc, state, pipe_config);
-	if (ret)
-		return ERR_PTR(ret);
-
-	/* Check things that can only be changed through modeset */
-	if (pipe_config->has_audio !=
-	    to_intel_crtc(crtc)->config->has_audio)
-		pipe_config->base.mode_changed = true;
-
-	/*
-	 * Note we have an issue here with infoframes: current code
-	 * only updates them on the full mode set path per hw
-	 * requirements.  So here we should be checking for any
-	 * required changes and forcing a mode set.
-	 */
-
-	intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]");
-
-	ret = drm_atomic_helper_check_planes(state->dev, state);
-	if (ret)
-		return ERR_PTR(ret);
-
-	return pipe_config;
-}
-
-static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
+static int intel_modeset_setup_plls(struct drm_atomic_state *state)
 {
 	struct drm_device *dev = state->dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -12957,9 +12812,13 @@ static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
 		}
 	}
 
-	ret = intel_shared_dpll_start_config(dev_priv, clear_pipes);
-	if (ret)
-		goto done;
+	if (clear_pipes) {
+		struct intel_shared_dpll_config *shared_dpll =
+			intel_atomic_get_shared_dpll_state(state);
+
+		for (i = 0; i < dev_priv->num_shared_dpll; i++)
+			shared_dpll[i].crtc_mask &= ~clear_pipes;
+	}
 
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
 		if (!needs_modeset(crtc_state) || !crtc_state->enable)
@@ -12970,18 +12829,80 @@ static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
 
 		ret = dev_priv->display.crtc_compute_clock(intel_crtc,
 							   intel_crtc_state);
-		if (ret) {
-			intel_shared_dpll_abort_config(dev_priv);
-			goto done;
-		}
+		if (ret)
+			return ret;
 	}
 
-done:
 	return ret;
 }
 
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	struct intel_crtc_state *first_crtc_state = NULL;
+	struct intel_crtc_state *other_crtc_state = NULL;
+	enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
+	int i;
+
+	/* look at all crtc's that are going to be enabled in during modeset */
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		intel_crtc = to_intel_crtc(crtc);
+
+		if (!crtc_state->active || !needs_modeset(crtc_state))
+			continue;
+
+		if (first_crtc_state) {
+			other_crtc_state = to_intel_crtc_state(crtc_state);
+			break;
+		} else {
+			first_crtc_state = to_intel_crtc_state(crtc_state);
+			first_pipe = intel_crtc->pipe;
+		}
+	}
+
+	/* No workaround needed? */
+	if (!first_crtc_state)
+		return 0;
+
+	/* w/a possibly needed, check how many crtc's are already enabled. */
+	for_each_intel_crtc(state->dev, intel_crtc) {
+		struct intel_crtc_state *pipe_config;
+
+		pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+		if (IS_ERR(pipe_config))
+			return PTR_ERR(pipe_config);
+
+		pipe_config->hsw_workaround_pipe = INVALID_PIPE;
+
+		if (!pipe_config->base.active ||
+		    needs_modeset(&pipe_config->base))
+			continue;
+
+		/* 2 or more enabled crtcs means no need for w/a */
+		if (enabled_pipe != INVALID_PIPE)
+			return 0;
+
+		enabled_pipe = intel_crtc->pipe;
+	}
+
+	if (enabled_pipe != INVALID_PIPE)
+		first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+	else if (other_crtc_state)
+		other_crtc_state->hsw_workaround_pipe = first_pipe;
+
+	return 0;
+}
+
 /* Code that should eventually be part of atomic_check() */
-static int __intel_set_mode_checks(struct drm_atomic_state *state)
+static int intel_modeset_checks(struct drm_atomic_state *state)
 {
 	struct drm_device *dev = state->dev;
 	int ret;
@@ -13003,61 +12924,72 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 			return ret;
 	}
 
-	ret = __intel_set_mode_setup_plls(state);
+	ret = intel_modeset_setup_plls(state);
 	if (ret)
 		return ret;
 
-	return 0;
+	if (IS_HASWELL(dev))
+		ret = haswell_mode_set_planes_workaround(state);
+
+	return ret;
+}
+
+static int
+intel_modeset_compute_config(struct drm_atomic_state *state)
+{
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	int ret, i;
+
+	ret = drm_atomic_helper_check_modeset(state->dev, state);
+	if (ret)
+		return ret;
+
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		if (!crtc_state->enable &&
+		    WARN_ON(crtc_state->active))
+			crtc_state->active = false;
+
+		if (!crtc_state->enable)
+			continue;
+
+		ret = intel_modeset_pipe_config(crtc, state);
+		if (ret)
+			return ret;
+
+		intel_dump_pipe_config(to_intel_crtc(crtc),
+				       to_intel_crtc_state(crtc_state),
+				       "[modeset]");
+	}
+
+	ret = intel_modeset_checks(state);
+	if (ret)
+		return ret;
+
+	return drm_atomic_helper_check_planes(state->dev, state);
 }
 
-static int __intel_set_mode(struct drm_crtc *modeset_crtc,
-			    struct intel_crtc_state *pipe_config)
+static int __intel_set_mode(struct drm_atomic_state *state)
 {
-	struct drm_device *dev = modeset_crtc->dev;
+	struct drm_device *dev = state->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_atomic_state *state = pipe_config->base.state;
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *crtc_state;
 	int ret = 0;
 	int i;
 
-	ret = __intel_set_mode_checks(state);
-	if (ret < 0)
-		return ret;
-
 	ret = drm_atomic_helper_prepare_planes(dev, state);
 	if (ret)
 		return ret;
 
+	drm_atomic_helper_swap_state(dev, state);
+
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
-		if (!needs_modeset(crtc_state))
+		if (!needs_modeset(crtc->state) || !crtc_state->active)
 			continue;
 
-		if (!crtc_state->enable) {
-			intel_crtc_disable(crtc);
-		} else if (crtc->state->enable) {
-			intel_crtc_disable_planes(crtc);
-			dev_priv->display.crtc_disable(crtc);
-		}
-	}
-
-	/* crtc->mode is already used by the ->mode_set callbacks, hence we need
-	 * to set it here already despite that we pass it down the callchain.
-	 *
-	 * Note we'll need to fix this up when we start tracking multiple
-	 * pipes; here we assume a single modeset_pipe and only track the
-	 * single crtc and mode.
-	 */
-	if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
-		modeset_crtc->mode = pipe_config->base.mode;
-
-		/*
-		 * Calculate and store various constants which
-		 * are later needed by vblank and swap-completion
-		 * timestamping. They are derived from true hwmode.
-		 */
-		drm_calc_timestamping_constants(modeset_crtc,
-						&pipe_config->base.adjusted_mode);
+		intel_crtc_disable_planes(crtc);
+		dev_priv->display.crtc_disable(crtc);
 	}
 
 	/* Only after disabling all output pipelines that will be changed can we
@@ -13069,11 +13001,11 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
 
 	modeset_update_crtc_power_domains(state);
 
-	drm_atomic_helper_commit_planes(dev, state);
-
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
-		if (!needs_modeset(crtc->state) || !crtc->state->enable)
+		drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+
+		if (!needs_modeset(crtc->state) || !crtc->state->active)
 			continue;
 
 		update_scanline_offset(to_intel_crtc(crtc));
@@ -13091,37 +13023,27 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
 	return 0;
 }
 
-static int intel_set_mode_with_config(struct drm_crtc *crtc,
-				      struct intel_crtc_state *pipe_config)
+static int intel_set_mode_checked(struct drm_atomic_state *state)
 {
+	struct drm_device *dev = state->dev;
 	int ret;
 
-	ret = __intel_set_mode(crtc, pipe_config);
-
+	ret = __intel_set_mode(state);
 	if (ret == 0)
-		intel_modeset_check_state(crtc->dev);
+		intel_modeset_check_state(dev);
 
 	return ret;
 }
 
-static int intel_set_mode(struct drm_crtc *crtc,
-			  struct drm_atomic_state *state)
+static int intel_set_mode(struct drm_atomic_state *state)
 {
-	struct intel_crtc_state *pipe_config;
-	int ret = 0;
-
-	pipe_config = intel_modeset_compute_config(crtc, state);
-	if (IS_ERR(pipe_config)) {
-		ret = PTR_ERR(pipe_config);
-		goto out;
-	}
+	int ret;
 
-	ret = intel_set_mode_with_config(crtc, pipe_config);
+	ret = intel_modeset_compute_config(state);
 	if (ret)
-		goto out;
+		return ret;
 
-out:
-	return ret;
+	return intel_set_mode_checked(state);
 }
 
 void intel_crtc_restore_mode(struct drm_crtc *crtc)
@@ -13193,7 +13115,7 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
 	intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
 					crtc->primary->fb, crtc->x, crtc->y);
 
-	ret = intel_set_mode(crtc, state);
+	ret = intel_set_mode(state);
 	if (ret)
 		drm_atomic_state_free(state);
 }
@@ -13339,20 +13261,10 @@ intel_modeset_stage_output_state(struct drm_device *dev,
 	return 0;
 }
 
-static bool primary_plane_visible(struct drm_crtc *crtc)
-{
-	struct intel_plane_state *plane_state =
-		to_intel_plane_state(crtc->primary->state);
-
-	return plane_state->visible;
-}
-
 static int intel_crtc_set_config(struct drm_mode_set *set)
 {
 	struct drm_device *dev;
 	struct drm_atomic_state *state = NULL;
-	struct intel_crtc_state *pipe_config;
-	bool primary_plane_was_visible;
 	int ret;
 
 	BUG_ON(!set);
@@ -13383,46 +13295,13 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 	if (ret)
 		goto out;
 
-	pipe_config = intel_modeset_compute_config(set->crtc, state);
-	if (IS_ERR(pipe_config)) {
-		ret = PTR_ERR(pipe_config);
+	ret = intel_modeset_compute_config(state);
+	if (ret)
 		goto out;
-	}
 
 	intel_update_pipe_size(to_intel_crtc(set->crtc));
 
-	primary_plane_was_visible = primary_plane_visible(set->crtc);
-
-	ret = intel_set_mode_with_config(set->crtc, pipe_config);
-
-	if (ret == 0 &&
-	    pipe_config->base.enable &&
-	    pipe_config->base.planes_changed &&
-	    !needs_modeset(&pipe_config->base)) {
-		struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
-		/*
-		 * We need to make sure the primary plane is re-enabled if it
-		 * has previously been turned off.
-		 */
-		if (ret == 0 && !primary_plane_was_visible &&
-		    primary_plane_visible(set->crtc)) {
-			WARN_ON(!intel_crtc->active);
-			intel_post_enable_primary(set->crtc);
-		}
-
-		/*
-		 * In the fastboot case this may be our only check of the
-		 * state after boot.  It would be better to only do it on
-		 * the first update, but we don't have a nice way of doing that
-		 * (and really, set_config isn't used much for high freq page
-		 * flipping, so increasing its cost here shouldn't be a big
-		 * deal).
-		 */
-		if (i915.fastboot && ret == 0)
-			intel_modeset_check_state(set->crtc->dev);
-	}
-
+	ret = intel_set_mode_checked(state);
 	if (ret) {
 		DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
 			      set->crtc->base.id, ret);
@@ -13755,8 +13634,15 @@ intel_check_primary_plane(struct drm_plane *plane,
 			 */
 			if (IS_BROADWELL(dev))
 				intel_crtc->atomic.wait_vblank = true;
+
+			if (crtc_state && !needs_modeset(&crtc_state->base))
+				intel_crtc->atomic.post_enable_primary = true;
 		}
 
+		if (!state->visible && old_state->visible &&
+		    crtc_state && !needs_modeset(&crtc_state->base))
+			intel_crtc->atomic.pre_disable_primary = true;
+
 		intel_crtc->atomic.fb_bits |=
 			INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
 
@@ -13820,6 +13706,7 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_crtc_state *crtc_state = intel_crtc->base.state;
 	struct intel_plane *intel_plane;
 	struct drm_plane *p;
 	unsigned fb_bits = 0;
@@ -13863,7 +13750,7 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc)
 	intel_runtime_pm_get(dev_priv);
 
 	/* Perform vblank evasion around commit operation */
-	if (intel_crtc->active)
+	if (crtc_state->active && !needs_modeset(crtc_state))
 		intel_crtc->atomic.evade =
 			intel_pipe_update_start(intel_crtc,
 						&intel_crtc->atomic.start_vbl_count);
@@ -13882,7 +13769,7 @@ static void intel_finish_crtc_commit(struct drm_crtc *crtc)
 
 	intel_runtime_pm_put(dev_priv);
 
-	if (intel_crtc->atomic.wait_vblank)
+	if (intel_crtc->atomic.wait_vblank && intel_crtc->active)
 		intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	intel_frontbuffer_flip(dev, intel_crtc->atomic.fb_bits);
@@ -14748,6 +14635,8 @@ static const struct drm_mode_config_funcs intel_mode_funcs = {
 	.output_poll_changed = intel_fbdev_output_poll_changed,
 	.atomic_check = intel_atomic_check,
 	.atomic_commit = intel_atomic_commit,
+	.atomic_state_alloc = intel_atomic_state_alloc,
+	.atomic_state_clear = intel_atomic_state_clear,
 };
 
 /* Set up chip specific display functions */
@@ -14774,7 +14663,6 @@ static void intel_init_display(struct drm_device *dev)
 			haswell_crtc_compute_clock;
 		dev_priv->display.crtc_enable = haswell_crtc_enable;
 		dev_priv->display.crtc_disable = haswell_crtc_disable;
-		dev_priv->display.off = ironlake_crtc_off;
 		dev_priv->display.update_primary_plane =
 			skylake_update_primary_plane;
 	} else if (HAS_DDI(dev)) {
@@ -14785,7 +14673,6 @@ static void intel_init_display(struct drm_device *dev)
 			haswell_crtc_compute_clock;
 		dev_priv->display.crtc_enable = haswell_crtc_enable;
 		dev_priv->display.crtc_disable = haswell_crtc_disable;
-		dev_priv->display.off = ironlake_crtc_off;
 		dev_priv->display.update_primary_plane =
 			ironlake_update_primary_plane;
 	} else if (HAS_PCH_SPLIT(dev)) {
@@ -14796,7 +14683,6 @@ static void intel_init_display(struct drm_device *dev)
 			ironlake_crtc_compute_clock;
 		dev_priv->display.crtc_enable = ironlake_crtc_enable;
 		dev_priv->display.crtc_disable = ironlake_crtc_disable;
-		dev_priv->display.off = ironlake_crtc_off;
 		dev_priv->display.update_primary_plane =
 			ironlake_update_primary_plane;
 	} else if (IS_VALLEYVIEW(dev)) {
@@ -14806,7 +14692,6 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
 		dev_priv->display.crtc_enable = valleyview_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
-		dev_priv->display.off = i9xx_crtc_off;
 		dev_priv->display.update_primary_plane =
 			i9xx_update_primary_plane;
 	} else {
@@ -14816,7 +14701,6 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
 		dev_priv->display.crtc_enable = i9xx_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
-		dev_priv->display.off = i9xx_crtc_off;
 		dev_priv->display.update_primary_plane =
 			i9xx_update_primary_plane;
 	}
@@ -15272,7 +15156,9 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *encoder;
 	u32 reg;
+	bool enable;
 
 	/* Clear any frame start delays used for debugging left by the BIOS */
 	reg = PIPECONF(crtc->config->cpu_transcoder);
@@ -15289,7 +15175,6 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 	 * disable the crtc (and hence change the state) if it is wrong. Note
 	 * that gen4+ has a fixed plane -> pipe mapping.  */
 	if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
-		struct intel_connector *connector;
 		bool plane;
 
 		DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
@@ -15301,30 +15186,8 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		plane = crtc->plane;
 		to_intel_plane_state(crtc->base.primary->state)->visible = true;
 		crtc->plane = !plane;
-		intel_crtc_disable_planes(&crtc->base);
-		dev_priv->display.crtc_disable(&crtc->base);
+		intel_crtc_disable_noatomic(&crtc->base);
 		crtc->plane = plane;
-
-		/* ... and break all links. */
-		for_each_intel_connector(dev, connector) {
-			if (connector->encoder->base.crtc != &crtc->base)
-				continue;
-
-			connector->base.dpms = DRM_MODE_DPMS_OFF;
-			connector->base.encoder = NULL;
-		}
-		/* multiple connectors may have the same encoder:
-		 *  handle them and break crtc link separately */
-		for_each_intel_connector(dev, connector)
-			if (connector->encoder->base.crtc == &crtc->base) {
-				connector->encoder->base.crtc = NULL;
-				connector->encoder->connectors_active = false;
-			}
-
-		WARN_ON(crtc->active);
-		crtc->base.state->enable = false;
-		crtc->base.state->active = false;
-		crtc->base.enabled = false;
 	}
 
 	if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
@@ -15338,13 +15201,18 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 
 	/* Adjust the state of the output pipe according to whether we
 	 * have active connectors/encoders. */
-	intel_crtc_update_dpms(&crtc->base);
+	enable = false;
+	for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+		enable |= encoder->connectors_active;
 
-	if (crtc->active != crtc->base.state->enable) {
-		struct intel_encoder *encoder;
+	if (!enable)
+		intel_crtc_disable_noatomic(&crtc->base);
+
+	if (crtc->active != crtc->base.state->active) {
 
 		/* This can happen either due to bugs in the get_hw_state
-		 * functions or because the pipe is force-enabled due to the
+		 * functions or because of calls to intel_crtc_disable_noatomic,
+		 * or because the pipe is force-enabled due to the
 		 * pipe A quirk. */
 		DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
 			      crtc->base.base.id,
@@ -15484,6 +15352,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		struct intel_plane_state *plane_state;
 
 		memset(crtc->config, 0, sizeof(*crtc->config));
+		crtc->config->base.crtc = &crtc->base;
 
 		crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
 
@@ -15493,6 +15362,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		crtc->base.state->enable = crtc->active;
 		crtc->base.state->active = crtc->active;
 		crtc->base.enabled = crtc->active;
+		crtc->base.hwmode = crtc->config->base.adjusted_mode;
 
 		plane_state = to_intel_plane_state(primary->state);
 		plane_state->visible = primary_get_hw_state(crtc);
@@ -15683,7 +15553,9 @@ void intel_modeset_gem_init(struct drm_device *dev)
 				  to_intel_crtc(c)->pipe);
 			drm_framebuffer_unreference(c->primary->fb);
 			c->primary->fb = NULL;
+			c->primary->crtc = c->primary->state->crtc = NULL;
 			update_state_fb(c->primary);
+			c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
 		}
 	}
 

drivers/gpu/drm/i915/intel_drv.h

@@ -241,6 +241,13 @@ typedef struct dpll {
 	int	p;
 } intel_clock_t;
 
+struct intel_atomic_state {
+	struct drm_atomic_state base;
+
+	bool dpll_set;
+	struct intel_shared_dpll_config shared_dpll[I915_NUM_PLLS];
+};
+
 struct intel_plane_state {
 	struct drm_plane_state base;
 	struct drm_rect src;
@@ -447,6 +454,9 @@ struct intel_crtc_state {
 	int pbn;
 
 	struct intel_crtc_scaler_state scaler_state;
+
+	/* w/a for waiting 2 vblanks during crtc enable */
+	enum pipe hsw_workaround_pipe;
 };
 
 struct intel_pipe_wm {
@@ -628,6 +638,7 @@ struct cxsr_latency {
 	unsigned long cursor_hpll_disable;
 };
 
+#define to_intel_atomic_state(x) container_of(x, struct intel_atomic_state, base)
 #define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
 #define to_intel_crtc_state(x) container_of(x, struct intel_crtc_state, base)
 #define to_intel_connector(x) container_of(x, struct intel_connector, base)
@@ -993,8 +1004,8 @@ int intel_pch_rawclk(struct drm_device *dev);
 void intel_mark_busy(struct drm_device *dev);
 void intel_mark_idle(struct drm_device *dev);
 void intel_crtc_restore_mode(struct drm_crtc *crtc);
-void intel_crtc_control(struct drm_crtc *crtc, bool enable);
-void intel_crtc_reset(struct intel_crtc *crtc);
+void intel_display_suspend(struct drm_device *dev);
+int intel_crtc_control(struct drm_crtc *crtc, bool enable);
 void intel_crtc_update_dpms(struct drm_crtc *crtc);
 void intel_encoder_destroy(struct drm_encoder *encoder);
 int intel_connector_init(struct intel_connector *);
@@ -1083,7 +1094,6 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
 #define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
 struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
 						struct intel_crtc_state *state);
-void intel_put_shared_dpll(struct intel_crtc *crtc);
 
 void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
 		      const struct dpll *dpll);
@@ -1405,6 +1415,11 @@ int intel_connector_atomic_get_property(struct drm_connector *connector,
 struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);
 void intel_crtc_destroy_state(struct drm_crtc *crtc,
 			       struct drm_crtc_state *state);
+struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev);
+void intel_atomic_state_clear(struct drm_atomic_state *);
+struct intel_shared_dpll_config *
+intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s);
+
 static inline struct intel_crtc_state *
 intel_atomic_get_crtc_state(struct drm_atomic_state *state,
 			    struct intel_crtc *crtc)