Merge 4.10-rc7 into staging-next

This resolves the merge errors that were reported in linux-next and it
picks up the staging and IIO fixes that we need/want in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.mailmap

@@ -137,6 +137,7 @@ Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
 Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
+Sarangdhar Joshi <spjoshi@codeaurora.org>
 Sam Ravnborg <sam@mars.ravnborg.org>
 Santosh Shilimkar <ssantosh@kernel.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
@@ -150,10 +151,13 @@ Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
+Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+Subhash Jadavani <subhashj@codeaurora.org>
 Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
+Thomas Pedersen <twp@codeaurora.org>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>

Documentation/ABI/testing/sysfs-devices-deferred_probe

@@ -1,12 +0,0 @@
-What:		/sys/devices/.../deferred_probe
-Date:		August 2016
-Contact:	Ben Hutchings <ben.hutchings@codethink.co.uk>
-Description:
-		The /sys/devices/.../deferred_probe attribute is
-		present for all devices.  If a driver detects during
-		probing a device that a related device is not yet
-		ready, it may defer probing of the first device.  The
-		kernel will retry probing the first device after any
-		other device is successfully probed.  This attribute
-		reads as 1 if probing of this device is currently
-		deferred, or 0 otherwise.

Documentation/devicetree/bindings/i2c/i2c.txt

@@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below.
 	"irq" and "wakeup" names are recognized by I2C core, other names are
 	left to individual drivers.
 
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
@@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
 
+Alternatively, devices supporting SMbus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
 Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
 interrupt for the device. If "wakeup" interrupt name is not present in the
 binding, then primary interrupt will be used as wakeup interrupt.

Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt

@@ -15,6 +15,9 @@ Properties:
   Second cell specifies the irq distribution mode to cores
      0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
 
+  The second cell in interrupts property is deprecated and may be ignored by
+  the kernel.
+
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
 

Documentation/devicetree/bindings/mtd/tango-nand.txt

@@ -5,7 +5,7 @@ Required properties:
 - compatible: "sigma,smp8758-nand"
 - reg: address/size of nfc_reg, nfc_mem, and pbus_reg
 - dmas: reference to the DMA channel used by the controller
-- dma-names: "nfc_sbox"
+- dma-names: "rxtx"
 - clocks: reference to the system clock
 - #address-cells: <1>
 - #size-cells: <0>
@@ -17,9 +17,9 @@ Example:
 
 	nandc: nand-controller@2c000 {
 		compatible = "sigma,smp8758-nand";
-		reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+		reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
 		dmas = <&dma0 3>;
-		dma-names = "nfc_sbox";
+		dma-names = "rxtx";
 		clocks = <&clkgen SYS_CLK>;
 		#address-cells = <1>;
 		#size-cells = <0>;

Documentation/devicetree/bindings/net/mediatek-net.txt

@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.

Documentation/devicetree/bindings/net/phy.txt

@@ -19,8 +19,9 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22.
 
-  If the phy's identifier is known then the list may contain an entry
-  of the form: "ethernet-phy-idAAAA.BBBB" where
+  If the PHY reports an incorrect ID (or none at all) then the
+  "compatible" list may contain an entry with the correct PHY ID in the
+  form: "ethernet-phy-idAAAA.BBBB" where
      AAAA - The value of the 16 bit Phy Identifier 1 register as
             4 hex digits. This is the chip vendor OUI bits 3:18
      BBBB - The value of the 16 bit Phy Identifier 2 register as

Documentation/devicetree/bindings/net/ti,dp83867.txt

@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -1,17 +1,23 @@
 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-<soctype>" for SoCs,
-			 "renesas,sh-msiof" for SuperH, or
-			 "renesas,sh-mobile-msiof" for SH Mobile series.
-			 Examples with soctypes are:
-			 "renesas,msiof-r8a7790" (R-Car H2)
+- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
 			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
+			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+			 "renesas,sh-msiof"      (deprecated)
+
+			 When compatible with the generic version, nodes
+			 must list the SoC-specific version corresponding
+			 to the platform first followed by the generic
+			 version.
+
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
@@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
 Example:
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
+		compatible = "renesas,msiof-r8a7791",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;

Documentation/filesystems/proc.txt

@@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the status files (as of 4.1)
+Table 1-2: Contents of the status files (as of 4.8)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
+ Umask                       file mode creation mask
  State                       state (R is running, S is sleeping, D is sleeping
                              in an uninterruptible wait, Z is zombie,
 			     T is traced or stopped)
@@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1)
  TracerPid                   PID of process tracing this process (0 if not)
  Uid                         Real, effective, saved set, and  file system UIDs
  Gid                         Real, effective, saved set, and  file system GIDs
- Umask                       file mode creation mask
  FDSize                      number of file descriptor slots currently allocated
  Groups                      supplementary group list
  NStgid                      descendant namespace thread group ID hierarchy
@@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1)
  VmPeak                      peak virtual memory size
  VmSize                      total program size
  VmLck                       locked memory size
+ VmPin                       pinned memory size
  VmHWM                       peak resident set size ("high water mark")
  VmRSS                       size of memory portions. It contains the three
                              following parts (VmRSS = RssAnon + RssFile + RssShmem)

Documentation/power/states.txt

@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
+parameter in the kernel command line.
 
 The properties of all of the sleep states are described below.
 

Documentation/vm/page_frags

@@ -0,0 +1,42 @@
+Page fragments
+--------------
+
+A page fragment is an arbitrary-length arbitrary-offset area of memory
+which resides within a 0 or higher order compound page.  Multiple
+fragments within that page are individually refcounted, in the page's
+reference counter.
+
+The page_frag functions, page_frag_alloc and page_frag_free, provide a
+simple allocation framework for page fragments.  This is used by the
+network stack and network device drivers to provide a backing region of
+memory for use as either an sk_buff->head, or to be used in the "frags"
+portion of skb_shared_info.
+
+In order to make use of the page fragment APIs a backing page fragment
+cache is needed.  This provides a central point for the fragment allocation
+and tracks allows multiple calls to make use of a cached page.  The
+advantage to doing this is that multiple calls to get_page can be avoided
+which can be expensive at allocation time.  However due to the nature of
+this caching it is required that any calls to the cache be protected by
+either a per-cpu limitation, or a per-cpu limitation and forcing interrupts
+to be disabled when executing the fragment allocation.
+
+The network stack uses two separate caches per CPU to handle fragment
+allocation.  The netdev_alloc_cache is used by callers making use of the
+__netdev_alloc_frag and __netdev_alloc_skb calls.  The napi_alloc_cache is
+used by callers of the __napi_alloc_frag and __napi_alloc_skb calls.  The
+main difference between these two calls is the context in which they may be
+called.  The "netdev" prefixed functions are usable in any context as these
+functions will disable interrupts, while the "napi" prefixed functions are
+only usable within the softirq context.
+
+Many network device drivers use a similar methodology for allocating page
+fragments, but the page fragments are cached at the ring or descriptor
+level.  In order to enable these cases it is necessary to provide a generic
+way of tearing down a page cache.  For this reason __page_frag_cache_drain
+was implemented.  It allows for freeing multiple references from a single
+page via a single call.  The advantage to doing this is that it allows for
+cleaning up the multiple references that were added to a page in order to
+avoid calling get_page per allocation.
+
+Alexander Duyck, Nov 29, 2016.

MAINTAINERS

@@ -81,7 +81,6 @@ Descriptions of section entries:
 	Q: Patchwork web based patch tracking system site
 	T: SCM tree type and location.
 	   Type is one of: git, hg, quilt, stgit, topgit
-	B: Bug tracking system location.
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -977,6 +976,7 @@ M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.armlinux.org.uk/
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git
 F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
@@ -1154,6 +1154,7 @@ ARM/CLKDEV SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git clkdev
 F:	arch/arm/include/asm/clkdev.h
 F:	drivers/clk/clkdev.c
 
@@ -1689,6 +1690,7 @@ M:	Krzysztof Kozlowski <krzk@kernel.org>
 R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
 F:	arch/arm/boot/dts/s5p*
@@ -2194,14 +2196,6 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/atmel
 
-ATMEL DMA DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
-F:	drivers/dma/at_hdmac.c
-F:	drivers/dma/at_hdmac_regs.h
-F:	include/linux/platform_data/dma-atmel.h
-
 ATMEL XDMA DRIVER
 M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org
@@ -3573,7 +3567,7 @@ F:	drivers/infiniband/hw/cxgb3/
 F:	include/uapi/rdma/cxgb3-abi.h
 
 CXGB4 ETHERNET DRIVER (CXGB4)
-M:	Hariprasad S <hariprasad@chelsio.com>
+M:	Ganesh Goudar <ganeshgr@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
@@ -4106,18 +4100,24 @@ F:	drivers/gpu/drm/bridge/
 
 DRM DRIVER FOR BOCHS VIRTUAL GPU
 M:	Gerd Hoffmann <kraxel@redhat.com>
-S:	Odd Fixes
+L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Maintained
 F:	drivers/gpu/drm/bochs/
 
 DRM DRIVER FOR QEMU'S CIRRUS DEVICE
 M:	Dave Airlie <airlied@redhat.com>
-S:	Odd Fixes
+M:	Gerd Hoffmann <kraxel@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Obsolete
+W:	https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
 F:	drivers/gpu/drm/cirrus/
 
 RADEON and AMDGPU DRM DRIVERS
 M:	Alex Deucher <alexander.deucher@amd.com>
 M:	Christian König <christian.koenig@amd.com>
-L:	dri-devel@lists.freedesktop.org
+L:	amd-gfx@lists.freedesktop.org
 T:	git git://people.freedesktop.org/~agd5f/linux
 S:	Supported
 F:	drivers/gpu/drm/radeon/
@@ -4153,7 +4153,7 @@ F:	Documentation/gpu/i915.rst
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:      Zhenyu Wang <zhenyuw@linux.intel.com>
 M:      Zhi Wang <zhi.a.wang@intel.com>
-L:      igvt-g-dev@lists.01.org
+L:      intel-gvt-dev@lists.freedesktop.org
 L:      intel-gfx@lists.freedesktop.org
 W:      https://01.org/igvt-g
 T:      git https://github.com/01org/gvt-linux.git
@@ -4304,7 +4304,10 @@ F:	Documentation/devicetree/bindings/display/renesas,du.txt
 
 DRM DRIVER FOR QXL VIRTUAL GPU
 M:	Dave Airlie <airlied@redhat.com>
-S:	Odd Fixes
+M:	Gerd Hoffmann <kraxel@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Maintained
 F:	drivers/gpu/drm/qxl/
 F:	include/uapi/drm/qxl_drm.h
 
@@ -7706,8 +7709,10 @@ F:	drivers/net/dsa/mv88e6xxx/
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
 
 MARVELL ARMADA DRM SUPPORT
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes
 F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
 F:	Documentation/devicetree/bindings/display/armada/
@@ -8179,6 +8184,15 @@ S:	Maintained
 F:	drivers/tty/serial/atmel_serial.c
 F:	include/linux/atmel_serial.h
 
+MICROCHIP / ATMEL DMA DRIVER
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	dmaengine@vger.kernel.org
+S:	Supported
+F:	drivers/dma/at_hdmac.c
+F:	drivers/dma/at_hdmac_regs.h
+F:	include/linux/platform_data/dma-atmel.h
+
 MICROCHIP / ATMEL ISC DRIVER
 M:	Songjun Wu <songjun.wu@microchip.com>
 L:	linux-media@vger.kernel.org
@@ -8903,8 +8917,10 @@ S:	Supported
 F:	drivers/nfc/nxp-nci
 
 NXP TDA998X DRM DRIVER
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Supported
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-fixes
 F:	drivers/gpu/drm/i2c/tda998x_drv.c
 F:	include/drm/i2c/tda998x.h
 
@@ -10179,7 +10195,6 @@ F:	drivers/media/tuners/qt1010*
 QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
 M:	QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
-L:	ath9k-devel@lists.ath9k.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
@@ -13056,7 +13071,7 @@ F:	drivers/input/serio/userio.c
 F:	include/uapi/linux/userio.h
 
 VIRTIO CONSOLE DRIVER
-M:	Amit Shah <amit.shah@redhat.com>
+M:	Amit Shah <amit@kernel.org>
 L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	drivers/char/virtio_console.c
@@ -13091,6 +13106,7 @@ M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
 L:	dri-devel@lists.freedesktop.org
 L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
 S:	Maintained
 F:	drivers/gpu/drm/virtio/
 F:	include/uapi/linux/virtio_gpu.h
@@ -13442,6 +13458,7 @@ F:	arch/x86/
 
 X86 PLATFORM DRIVERS
 M:	Darren Hart <dvhart@infradead.org>
+M:	Andy Shevchenko <andy@infradead.org>
 L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
 S:	Maintained
@@ -13613,6 +13630,7 @@ F:	drivers/net/hamradio/z8530.h
 
 ZBUD COMPRESSED PAGE ALLOCATOR
 M:	Seth Jennings <sjenning@redhat.com>
+M:	Dan Streetman <ddstreet@ieee.org>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zbud.c
@@ -13668,6 +13686,7 @@ F:	Documentation/vm/zsmalloc.txt
 
 ZSWAP COMPRESSED SWAP CACHING
 M:	Seth Jennings <sjenning@redhat.com>
+M:	Dan Streetman <ddstreet@ieee.org>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zswap.c

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
-NAME = Roaring Lionus
+EXTRAVERSION = -rc7
+NAME = Fearless Coyote
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -797,7 +797,7 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 KBUILD_ARFLAGS := $(call ar-option,D)
 
 # check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
 	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
 endif

arch/arc/Kconfig

@@ -29,7 +29,7 @@ config ARC
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_MEMBLOCK
-	select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
+	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select HANDLE_DOMAIN_IRQ

arch/arc/include/asm/cache.h

@@ -67,7 +67,7 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_IC_PTAG_HI	0x1F
 
 /* Bit val in IC_CTRL */
-#define IC_CTRL_CACHE_DISABLE   0x1
+#define IC_CTRL_DIS		0x1
 
 /* Data cache related Auxiliary registers */
 #define ARC_REG_DC_BCR		0x72	/* Build Config reg */
@@ -80,8 +80,9 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_DC_PTAG_HI	0x5F
 
 /* Bit val in DC_CTRL */
-#define DC_CTRL_INV_MODE_FLUSH  0x40
-#define DC_CTRL_FLUSH_STATUS    0x100
+#define DC_CTRL_DIS		0x001
+#define DC_CTRL_INV_MODE_FLUSH	0x040
+#define DC_CTRL_FLUSH_STATUS	0x100
 
 /*System-level cache (L2 cache) related Auxiliary registers */
 #define ARC_REG_SLC_CFG		0x901
@@ -92,8 +93,8 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_SLC_RGN_END	0x916
 
 /* Bit val in SLC_CONTROL */
+#define SLC_CTRL_DIS		0x001
 #define SLC_CTRL_IM		0x040
-#define SLC_CTRL_DISABLE	0x001
 #define SLC_CTRL_BUSY		0x100
 #define SLC_CTRL_RGN_OP_INV	0x200
 

arch/arc/include/asm/delay.h

@@ -26,7 +26,9 @@ static inline void __delay(unsigned long loops)
 	"	lp  1f			\n"
 	"	nop			\n"
 	"1:				\n"
-	: : "r"(loops));
+	:
+        : "r"(loops)
+        : "lp_count");
 }
 
 extern void __bad_udelay(void);

arch/arc/include/asm/entry-arcv2.h

@@ -16,6 +16,7 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+	PUSH	r30
 	PUSH	r12
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
@@ -72,6 +73,7 @@
 	POPAX	AUX_USER_SP
 1:
 	POP	r12
+	POP	r30
 
 .endm
 

arch/arc/include/asm/module.h

@@ -14,13 +14,13 @@
 
 #include <asm-generic/module.h>
 
-#ifdef CONFIG_ARC_DW2_UNWIND
 struct mod_arch_specific {
+#ifdef CONFIG_ARC_DW2_UNWIND
 	void *unw_info;
 	int unw_sec_idx;
+#endif
 	const char *secstr;
 };
-#endif
 
 #define MODULE_PROC_FAMILY "ARC700"
 

arch/arc/include/asm/ptrace.h

@@ -84,7 +84,7 @@ struct pt_regs {
 	unsigned long fp;
 	unsigned long sp;	/* user/kernel sp depending on where we came from  */
 
-	unsigned long r12;
+	unsigned long r12, r30;
 
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;

arch/arc/include/asm/setup.h

@@ -31,6 +31,7 @@ extern int root_mountflags, end_mem;
 
 void setup_processor(void);
 void __init setup_arch_memory(void);
+long __init arc_get_mem_sz(void);
 
 /* Helpers used in arc_*_mumbojumbo routines */
 #define IS_AVAIL1(v, s)		((v) ? s : "")

arch/arc/kernel/head.S

@@ -71,14 +71,14 @@ ENTRY(stext)
 	GET_CPU_ID  r5
 	cmp	r5, 0
 	mov.nz	r0, r5
-#ifdef CONFIG_ARC_SMP_HALT_ON_RESET
-	; Non-Master can proceed as system would be booted sufficiently
-	jnz	first_lines_of_secondary
-#else
+	bz	.Lmaster_proceed
+
 	; Non-Masters wait for Master to boot enough and bring them up
-	jnz	arc_platform_smp_wait_to_boot
-#endif
-	; Master falls thru
+	; when they resume, tail-call to entry point
+	mov	blink, @first_lines_of_secondary
+	j	arc_platform_smp_wait_to_boot
+
+.Lmaster_proceed:
 #endif
 
 	; Clear BSS before updating any globals

arch/arc/kernel/intc-arcv2.c

@@ -77,20 +77,20 @@ void arc_init_IRQ(void)
 
 static void arcv2_irq_mask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 0);
 }
 
 static void arcv2_irq_unmask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 1);
 }
 
 void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
 
 	/*

arch/arc/kernel/intc-compact.c

@@ -57,7 +57,7 @@ static void arc_irq_mask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb &= ~(1 << data->irq);
+	ienb &= ~(1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 
@@ -66,7 +66,7 @@ static void arc_irq_unmask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb |= (1 << data->irq);
+	ienb |= (1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 

arch/arc/kernel/mcip.c

@@ -10,6 +10,7 @@
 
 #include <linux/smp.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/spinlock.h>
 #include <soc/arc/mcip.h>
 #include <asm/irqflags-arcv2.h>
@@ -92,11 +93,10 @@ static void mcip_probe_n_setup(void)
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
 	sprintf(smp_cpuinfo_buf,
-		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
+		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
 		mp.ver, mp.num_cores,
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
-		IS_AVAIL1(mp.llm, "LLM "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
@@ -174,7 +174,6 @@ static void idu_irq_unmask(struct irq_data *data)
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
-#ifdef CONFIG_SMP
 static int
 idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 		     bool force)
@@ -204,12 +203,27 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 
 	return IRQ_SET_MASK_OK;
 }
-#endif
+
+static void idu_irq_enable(struct irq_data *data)
+{
+	/*
+	 * By default send all common interrupts to all available online CPUs.
+	 * The affinity of common interrupts in IDU must be set manually since
+	 * in some cases the kernel will not call irq_set_affinity() by itself:
+	 *   1. When the kernel is not configured with support of SMP.
+	 *   2. When the kernel is configured with support of SMP but upper
+	 *      interrupt controllers does not support setting of the affinity
+	 *      and cannot propagate it to IDU.
+	 */
+	idu_irq_set_affinity(data, cpu_online_mask, false);
+	idu_irq_unmask(data);
+}
 
 static struct irq_chip idu_irq_chip = {
 	.name			= "MCIP IDU Intc",
 	.irq_mask		= idu_irq_mask,
 	.irq_unmask		= idu_irq_unmask,
+	.irq_enable		= idu_irq_enable,
 #ifdef CONFIG_SMP
 	.irq_set_affinity       = idu_irq_set_affinity,
 #endif
@@ -221,10 +235,13 @@ static irq_hw_number_t idu_first_hwirq;
 static void idu_cascade_isr(struct irq_desc *desc)
 {
 	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	struct irq_chip *core_chip = irq_desc_get_chip(desc);
 	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
 	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
 
+	chained_irq_enter(core_chip, desc);
 	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
+	chained_irq_exit(core_chip, desc);
 }
 
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
@@ -239,36 +256,14 @@ static int idu_irq_xlate(struct irq_domain *d, struct device_node *n,
 			 const u32 *intspec, unsigned int intsize,
 			 irq_hw_number_t *out_hwirq, unsigned int *out_type)
 {
-	irq_hw_number_t hwirq = *out_hwirq = intspec[0];
-	int distri = intspec[1];
-	unsigned long flags;
-
+	/*
+	 * Ignore value of interrupt distribution mode for common interrupts in
+	 * IDU which resides in intspec[1] since setting an affinity using value
+	 * from Device Tree is deprecated in ARC.
+	 */
+	*out_hwirq = intspec[0];
 	*out_type = IRQ_TYPE_NONE;
 
-	/* XXX: validate distribution scheme again online cpu mask */
-	if (distri == 0) {
-		/* 0 - Round Robin to all cpus, otherwise 1 bit per core */
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		idu_set_dest(hwirq, BIT(num_online_cpus()) - 1);
-		idu_set_mode(hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	} else {
-		/*
-		 * DEST based distribution for Level Triggered intr can only
-		 * have 1 CPU, so generalize it to always contain 1 cpu
-		 */
-		int cpu = ffs(distri);
-
-		if (cpu != fls(distri))
-			pr_warn("IDU irq %lx distri mode set to cpu %x\n",
-				hwirq, cpu);
-
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		idu_set_dest(hwirq, cpu);
-		idu_set_mode(hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_DEST);
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	}
-
 	return 0;
 }
 

arch/arc/kernel/module.c

@@ -32,8 +32,8 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 #ifdef CONFIG_ARC_DW2_UNWIND
 	mod->arch.unw_sec_idx = 0;
 	mod->arch.unw_info = NULL;
-	mod->arch.secstr = secstr;
 #endif
+	mod->arch.secstr = secstr;
 	return 0;
 }
 
@@ -113,8 +113,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 
 	}
 
+#ifdef CONFIG_ARC_DW2_UNWIND
 	if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0)
 		module->arch.unw_sec_idx = tgtsec;
+#endif
 
 	return 0;
 

arch/arc/kernel/smp.c

@@ -90,22 +90,37 @@ void __init smp_cpus_done(unsigned int max_cpus)
  */
 static volatile int wake_flag;
 
+#ifdef CONFIG_ISA_ARCOMPACT
+
+#define __boot_read(f)		f
+#define __boot_write(f, v)	f = v
+
+#else
+
+#define __boot_read(f)		arc_read_uncached_32(&f)
+#define __boot_write(f, v)	arc_write_uncached_32(&f, v)
+
+#endif
+
 static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
 {
 	BUG_ON(cpu == 0);
-	wake_flag = cpu;
+
+	__boot_write(wake_flag, cpu);
 }
 
 void arc_platform_smp_wait_to_boot(int cpu)
 {
-	while (wake_flag != cpu)
+	/* for halt-on-reset, we've waited already */
+	if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
+		return;
+
+	while (__boot_read(wake_flag) != cpu)
 		;
 
-	wake_flag = 0;
-	__asm__ __volatile__("j @first_lines_of_secondary	\n");
+	__boot_write(wake_flag, 0);
 }
 
-
 const char *arc_platform_smp_cpuinfo(void)
 {
 	return plat_smp_ops.info ? : "";

arch/arc/kernel/unaligned.c

@@ -241,8 +241,9 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 	if (state.fault)
 		goto fault;
 
+	/* clear any remanants of delay slot */
 	if (delay_mode(regs)) {
-		regs->ret = regs->bta;
+		regs->ret = regs->bta ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;

arch/arc/mm/cache.c

@@ -23,7 +23,7 @@
 
 static int l2_line_sz;
 static int ioc_exists;
-int slc_enable = 1, ioc_enable = 0;
+int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
@@ -271,7 +271,11 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
 
 /*
  * For ARC700 MMUv3 I-cache and D-cache flushes
- * Also reused for HS38 aliasing I-cache configuration
+ *  - ARC700 programming model requires paddr and vaddr be passed in seperate
+ *    AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the
+ *    caches actually alias or not.
+ * -  For HS38, only the aliasing I-cache configuration uses the PTAG reg
+ *    (non aliasing I-cache version doesn't; while D-cache can't possibly alias)
  */
 static inline
 void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
@@ -458,6 +462,21 @@ static inline void __dc_entire_op(const int op)
 	__after_dc_op(op);
 }
 
+static inline void __dc_disable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	__dc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS);
+}
+
+static void __dc_enable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS);
+}
+
 /* For kernel mappings cache operation: index is same as paddr */
 #define __dc_line_op_k(p, sz, op)	__dc_line_op(p, p, sz, op)
 
@@ -483,6 +502,8 @@ static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr,
 #else
 
 #define __dc_entire_op(op)
+#define __dc_disable()
+#define __dc_enable()
 #define __dc_line_op(paddr, vaddr, sz, op)
 #define __dc_line_op_k(paddr, sz, op)
 
@@ -597,6 +618,40 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
 #endif
 }
 
+noinline static void slc_entire_op(const int op)
+{
+	unsigned int ctrl, r = ARC_REG_SLC_CTRL;
+
+	ctrl = read_aux_reg(r);
+
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
+	else
+		ctrl |= SLC_CTRL_IM;
+
+	write_aux_reg(r, ctrl);
+
+	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+
+	/* Important to wait for flush to complete */
+	while (read_aux_reg(r) & SLC_CTRL_BUSY);
+}
+
+static inline void arc_slc_disable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	slc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS);
+}
+
+static inline void arc_slc_enable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS);
+}
+
 /***********************************************************
  * Exported APIs
  */
@@ -923,21 +978,54 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
 	return 0;
 }
 
-void arc_cache_init(void)
+/*
+ * IO-Coherency (IOC) setup rules:
+ *
+ * 1. Needs to be at system level, so only once by Master core
+ *    Non-Masters need not be accessing caches at that time
+ *    - They are either HALT_ON_RESET and kick started much later or
+ *    - if run on reset, need to ensure that arc_platform_smp_wait_to_boot()
+ *      doesn't perturb caches or coherency unit
+ *
+ * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC,
+ *    otherwise any straggler data might behave strangely post IOC enabling
+ *
+ * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
+ *    Coherency transactions
+ */
+noinline void __init arc_ioc_setup(void)
 {
-	unsigned int __maybe_unused cpu = smp_processor_id();
-	char str[256];
+	unsigned int ap_sz;
 
-	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+	/* Flush + invalidate + disable L1 dcache */
+	__dc_disable();
+
+	/* Flush + invalidate SLC */
+	if (read_aux_reg(ARC_REG_SLC_BCR))
+		slc_entire_op(OP_FLUSH_N_INV);
+
+	/* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */
+	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
 
 	/*
-	 * Only master CPU needs to execute rest of function:
-	 *  - Assume SMP so all cores will have same cache config so
-	 *    any geomtry checks will be same for all
-	 *  - IOC setup / dma callbacks only need to be setup once
+	 * IOC Aperture size:
+	 *   decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M
+	 * TBD: fix for PGU + 1GB of low mem
+	 * TBD: fix for PAE
 	 */
-	if (cpu)
-		return;
+	ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2;
+	write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz);
+
+	write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
+	write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+
+	/* Re-enable L1 dcache */
+	__dc_enable();
+}
+
+void __init arc_cache_init_master(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
 		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
@@ -985,30 +1073,14 @@ void arc_cache_init(void)
 		}
 	}
 
-	if (is_isa_arcv2() && l2_line_sz && !slc_enable) {
-
-		/* IM set : flush before invalidate */
-		write_aux_reg(ARC_REG_SLC_CTRL,
-			read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM);
+	/* Note that SLC disable not formally supported till HS 3.0 */
+	if (is_isa_arcv2() && l2_line_sz && !slc_enable)
+		arc_slc_disable();
 
-		write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
-
-		/* Important to wait for flush to complete */
-		while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
-		write_aux_reg(ARC_REG_SLC_CTRL,
-			read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
-	}
+	if (is_isa_arcv2() && ioc_enable)
+		arc_ioc_setup();
 
 	if (is_isa_arcv2() && ioc_enable) {
-		/* IO coherency base - 0x8z */
-		write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
-		/* IO coherency aperture size - 512Mb: 0x8z-0xAz */
-		write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
-		/* Enable partial writes */
-		write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
-		/* Enable IO coherency */
-		write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
-
 		__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
 		__dma_cache_inv = __dma_cache_inv_ioc;
 		__dma_cache_wback = __dma_cache_wback_ioc;
@@ -1022,3 +1094,20 @@ void arc_cache_init(void)
 		__dma_cache_wback = __dma_cache_wback_l1;
 	}
 }
+
+void __ref arc_cache_init(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
+	char str[256];
+
+	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+
+	/*
+	 * Only master CPU needs to execute rest of function:
+	 *  - Assume SMP so all cores will have same cache config so
+	 *    any geomtry checks will be same for all
+	 *  - IOC setup / dma callbacks only need to be setup once
+	 */
+	if (!cpu)
+		arc_cache_init_master();
+}

arch/arc/mm/init.c

@@ -40,6 +40,11 @@ struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 #endif
 
+long __init arc_get_mem_sz(void)
+{
+	return low_mem_sz;
+}
+
 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
 static int __init setup_mem_sz(char *str)
 {

arch/arm/boot/dts/Makefile

@@ -846,6 +846,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-nanopi-m1.dtb	\
 	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-orangepi-2.dtb \
 	sun8i-h3-orangepi-lite.dtb \

arch/arm/boot/dts/am335x-icev2.dts

@@ -170,7 +170,6 @@
 			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
 			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
 			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
 		>;
 	};
 

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -160,7 +160,7 @@
 
 	axi {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011c40a>;
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 

arch/arm/boot/dts/da850-evm.dts

@@ -99,6 +99,7 @@
 				#size-cells = <1>;
 				compatible = "m25p64";
 				spi-max-frequency = <30000000>;
+				m25p,fast-read;
 				reg = <0>;
 				partition@0 {
 					label = "U-Boot-SPL";

arch/arm/boot/dts/dra7.dtsi

@@ -1378,6 +1378,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		rtc: rtc@48838000 {

arch/arm/boot/dts/dra72-evm-revc.dts

@@ -75,6 +75,6 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-imepdance;
+		ti,min-output-impedance;
 	};
 };

arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

@@ -319,8 +319,6 @@
 		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "imx6q-nitrogen6_max-sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@@ -402,6 +400,8 @@
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;

arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi

@@ -250,8 +250,6 @@
 		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "imx6q-nitrogen6_som2-sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@@ -320,6 +318,8 @@
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;

arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts

@@ -158,7 +158,7 @@
 &mmc1 {
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	pinctrl-0 = <&mmc1_pins>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
 	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
 	vmmc-supply = <&vmmc1>;
@@ -193,7 +193,8 @@
 			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
 			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
 			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 sdmmc1_wp*/
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
 		>;
 	};
 
@@ -242,12 +243,6 @@
 			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
 		>;
 	};
-
-	mmc1_cd: pinmux_mmc1_cd {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
-		>;
-	};
 };
 
 

arch/arm/boot/dts/omap5.dtsi

@@ -988,6 +988,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		dss: dss@58000000 {

arch/arm/boot/dts/qcom-mdm9615.dtsi

@@ -357,7 +357,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -140,6 +140,10 @@
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -234,6 +234,7 @@
 	de: display-engine {
 		compatible = "allwinner,sun6i-a31-display-engine";
 		allwinner,pipelines = <&fe0>;
+		status = "disabled";
 	};
 
 	soc@01c00000 {

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts

@@ -56,7 +56,7 @@
 };
 
 &pio {
-	mmc2_pins_nrst: mmc2@0 {
+	mmc2_pins_nrst: mmc2-rst-pin {
 		allwinner,pins = "PC16";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

arch/arm/configs/multi_v7_defconfig

@@ -471,7 +471,7 @@ CONFIG_MESON_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
-CONFIG_BCM47XX_WATCHDOG=y
+CONFIG_BCM47XX_WDT=y
 CONFIG_BCM7038_WDT=m
 CONFIG_BCM_KONA_WDT=y
 CONFIG_MFD_ACT8945A=y
@@ -893,7 +893,7 @@ CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EFI_VARS=m
 CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_NVRAM=y
 CONFIG_BCM47XX_SPROM=y
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y

arch/arm/configs/s3c2410_defconfig

@@ -86,9 +86,9 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/include/asm/cputype.h

@@ -94,6 +94,9 @@
 #define ARM_CPU_XSCALE_ARCH_V2		0x4000
 #define ARM_CPU_XSCALE_ARCH_V3		0x6000
 
+/* Qualcomm implemented cores */
+#define ARM_CPU_PART_SCORPION		0x510002d0
+
 extern unsigned int processor_id;
 
 #ifdef CONFIG_CPU_CP15

arch/arm/include/asm/ftrace.h

@@ -54,6 +54,24 @@ static inline void *return_address(unsigned int level)
 
 #define ftrace_return_address(n) return_address(n)
 
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	if (!strcmp(sym, "sys_mmap2"))
+		sym = "sys_mmap_pgoff";
+	else if (!strcmp(sym, "sys_statfs64_wrapper"))
+		sym = "sys_statfs64";
+	else if (!strcmp(sym, "sys_fstatfs64_wrapper"))
+		sym = "sys_fstatfs64";
+	else if (!strcmp(sym, "sys_arm_fadvise64_64"))
+		sym = "sys_fadvise64_64";
+
+	/* Ignore case since sym may start with "SyS" instead of "sys" */
+	return !strcasecmp(sym, name);
+}
+
 #endif /* ifndef __ASSEMBLY__ */
 
 #endif /* _ASM_ARM_FTRACE */

arch/arm/include/asm/virt.h

@@ -80,6 +80,11 @@ static inline bool is_kernel_in_hyp_mode(void)
 	return false;
 }
 
+static inline bool has_vhe(void)
+{
+	return false;
+}
+
 /* The section containing the hypervisor idmap text */
 extern char __hyp_idmap_text_start[];
 extern char __hyp_idmap_text_end[];

arch/arm/include/asm/types.h → arch/arm/include/uapi/asm/types.h

@@ -1,5 +1,5 @@
-#ifndef _ASM_TYPES_H
-#define _ASM_TYPES_H
+#ifndef _UAPI_ASM_TYPES_H
+#define _UAPI_ASM_TYPES_H
 
 #include <asm-generic/int-ll64.h>
 
@@ -37,4 +37,4 @@
 #define __UINTPTR_TYPE__	unsigned long
 #endif
 
-#endif /* _ASM_TYPES_H */
+#endif /* _UAPI_ASM_TYPES_H */

arch/arm/kernel/hw_breakpoint.c

@@ -1063,6 +1063,22 @@ static int __init arch_hw_breakpoint_init(void)
 		return 0;
 	}
 
+	/*
+	 * Scorpion CPUs (at least those in APQ8060) seem to set DBGPRSR.SPD
+	 * whenever a WFI is issued, even if the core is not powered down, in
+	 * violation of the architecture.  When DBGPRSR.SPD is set, accesses to
+	 * breakpoint and watchpoint registers are treated as undefined, so
+	 * this results in boot time and runtime failures when these are
+	 * accessed and we unexpectedly take a trap.
+	 *
+	 * It's not clear if/how this can be worked around, so we blacklist
+	 * Scorpion CPUs to avoid these issues.
+	*/
+	if (read_cpuid_part() == ARM_CPU_PART_SCORPION) {
+		pr_info("Scorpion CPU detected. Hardware breakpoints and watchpoints disabled\n");
+		return 0;
+	}
+
 	has_ossr = core_has_os_save_restore();
 
 	/* Determine how many BRPs/WRPs are available. */

arch/arm/kernel/smp_tlb.c

@@ -9,6 +9,7 @@
  */
 #include <linux/preempt.h>
 #include <linux/smp.h>
+#include <linux/uaccess.h>
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
@@ -40,8 +41,11 @@ static inline void ipi_flush_tlb_mm(void *arg)
 static inline void ipi_flush_tlb_page(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_page(void *arg)
@@ -54,8 +58,11 @@ static inline void ipi_flush_tlb_kernel_page(void *arg)
 static inline void ipi_flush_tlb_range(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_range(void *arg)

arch/arm/kvm/arm.c

@@ -1099,6 +1099,9 @@ static void cpu_init_hyp_mode(void *dummy)
 	__cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr);
 	__cpu_init_stage2();
 
+	if (is_kernel_in_hyp_mode())
+		kvm_timer_init_vhe();
+
 	kvm_arm_init_debug();
 }
 

arch/arm/mach-omap1/dma.c

@@ -32,7 +32,6 @@
 #include "soc.h"
 
 #define OMAP1_DMA_BASE			(0xfffed800)
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
 
 static u32 enable_1510_mode;
 
@@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void)
 		goto exit_iounmap;
 	}
 
-	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
-
 	/* Valid attributes for omap1 plus processors */
 	if (cpu_is_omap15xx())
 		d->dev_caps = ENABLE_1510_MODE;
@@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void)
 	d->dev_caps		|= CLEAR_CSR_ON_READ;
 	d->dev_caps		|= IS_WORD_16;
 
-	if (cpu_is_omap15xx())
-		d->chan_count = 9;
-	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
-		if (!(d->dev_caps & ENABLE_1510_MODE))
-			d->chan_count = 16;
+	/* available logical channels */
+	if (cpu_is_omap15xx()) {
+		d->lch_count = 9;
+	} else {
+		if (d->dev_caps & ENABLE_1510_MODE)
+			d->lch_count = 9;
 		else
-			d->chan_count = 9;
+			d->lch_count = 16;
 	}
 
 	p = dma_plat_info;

arch/arm/mach-omap2/pdata-quirks.c

@@ -161,7 +161,7 @@ static struct ti_st_plat_data wilink7_pdata = {
 	.nshutdown_gpio = 162,
 	.dev_name = "/dev/ttyO1",
 	.flow_cntrl = 1,
-	.baud_rate = 300000,
+	.baud_rate = 3000000,
 };
 
 static struct platform_device wl128x_device = {

arch/arm/mach-ux500/pm.c

@@ -134,8 +134,8 @@ bool prcmu_pending_irq(void)
  */
 bool prcmu_is_cpu_in_wfi(int cpu)
 {
-	return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 :
-		     PRCM_ARM_WFI_STANDBY_WFI0;
+	return readl(PRCM_ARM_WFI_STANDBY) &
+		(cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : PRCM_ARM_WFI_STANDBY_WFI0);
 }
 
 /*

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -137,6 +137,10 @@
 	};
 };
 
+&scpi_clocks {
+	status = "disabled";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -55,7 +55,7 @@
 		mboxes = <&mailbox 1 &mailbox 2>;
 		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
 
-		clocks {
+		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
 			scpi_dvfs: scpi_clocks@0 {

arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -1367,7 +1367,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;

arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts

@@ -27,7 +27,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -72,7 +72,7 @@
 			     <1 10 0xf08>;
 	};
 
-	amba_apu {
+	amba_apu: amba_apu@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -175,7 +175,7 @@
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -185,7 +185,7 @@
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;

arch/arm64/crypto/aes-modes.S

@@ -193,15 +193,16 @@ AES_ENTRY(aes_cbc_encrypt)
 	cbz		w6, .Lcbcencloop
 
 	ld1		{v0.16b}, [x5]			/* get iv */
-	enc_prepare	w3, x2, x5
+	enc_prepare	w3, x2, x6
 
 .Lcbcencloop:
 	ld1		{v1.16b}, [x1], #16		/* get next pt block */
 	eor		v0.16b, v0.16b, v1.16b		/* ..and xor with iv */
-	encrypt_block	v0, w3, x2, x5, w6
+	encrypt_block	v0, w3, x2, x6, w7
 	st1		{v0.16b}, [x0], #16
 	subs		w4, w4, #1
 	bne		.Lcbcencloop
+	st1		{v0.16b}, [x5]			/* return iv */
 	ret
 AES_ENDPROC(aes_cbc_encrypt)
 
@@ -211,7 +212,7 @@ AES_ENTRY(aes_cbc_decrypt)
 	cbz		w6, .LcbcdecloopNx
 
 	ld1		{v7.16b}, [x5]			/* get iv */
-	dec_prepare	w3, x2, x5
+	dec_prepare	w3, x2, x6
 
 .LcbcdecloopNx:
 #if INTERLEAVE >= 2
@@ -248,7 +249,7 @@ AES_ENTRY(aes_cbc_decrypt)
 .Lcbcdecloop:
 	ld1		{v1.16b}, [x1], #16		/* get next ct block */
 	mov		v0.16b, v1.16b			/* ...and copy to v0 */
-	decrypt_block	v0, w3, x2, x5, w6
+	decrypt_block	v0, w3, x2, x6, w7
 	eor		v0.16b, v0.16b, v7.16b		/* xor with iv => pt */
 	mov		v7.16b, v1.16b			/* ct is next iv */
 	st1		{v0.16b}, [x0], #16
@@ -256,6 +257,7 @@ AES_ENTRY(aes_cbc_decrypt)
 	bne		.Lcbcdecloop
 .Lcbcdecout:
 	FRAME_POP
+	st1		{v7.16b}, [x5]			/* return iv */
 	ret
 AES_ENDPROC(aes_cbc_decrypt)
 
@@ -267,24 +269,15 @@ AES_ENDPROC(aes_cbc_decrypt)
 
 AES_ENTRY(aes_ctr_encrypt)
 	FRAME_PUSH
-	cbnz		w6, .Lctrfirst		/* 1st time around? */
-	umov		x5, v4.d[1]		/* keep swabbed ctr in reg */
-	rev		x5, x5
-#if INTERLEAVE >= 2
-	cmn		w5, w4			/* 32 bit overflow? */
-	bcs		.Lctrinc
-	add		x5, x5, #1		/* increment BE ctr */
-	b		.LctrincNx
-#else
-	b		.Lctrinc
-#endif
-.Lctrfirst:
+	cbz		w6, .Lctrnotfirst	/* 1st time around? */
 	enc_prepare	w3, x2, x6
 	ld1		{v4.16b}, [x5]
-	umov		x5, v4.d[1]		/* keep swabbed ctr in reg */
-	rev		x5, x5
+
+.Lctrnotfirst:
+	umov		x8, v4.d[1]		/* keep swabbed ctr in reg */
+	rev		x8, x8
 #if INTERLEAVE >= 2
-	cmn		w5, w4			/* 32 bit overflow? */
+	cmn		w8, w4			/* 32 bit overflow? */
 	bcs		.Lctrloop
 .LctrloopNx:
 	subs		w4, w4, #INTERLEAVE
@@ -292,11 +285,11 @@ AES_ENTRY(aes_ctr_encrypt)
 #if INTERLEAVE == 2
 	mov		v0.8b, v4.8b
 	mov		v1.8b, v4.8b
-	rev		x7, x5
-	add		x5, x5, #1
+	rev		x7, x8
+	add		x8, x8, #1
 	ins		v0.d[1], x7
-	rev		x7, x5
-	add		x5, x5, #1
+	rev		x7, x8
+	add		x8, x8, #1
 	ins		v1.d[1], x7
 	ld1		{v2.16b-v3.16b}, [x1], #32	/* get 2 input blocks */
 	do_encrypt_block2x
@@ -305,7 +298,7 @@ AES_ENTRY(aes_ctr_encrypt)
 	st1		{v0.16b-v1.16b}, [x0], #32
 #else
 	ldr		q8, =0x30000000200000001	/* addends 1,2,3[,0] */
-	dup		v7.4s, w5
+	dup		v7.4s, w8
 	mov		v0.16b, v4.16b
 	add		v7.4s, v7.4s, v8.4s
 	mov		v1.16b, v4.16b
@@ -323,18 +316,12 @@ AES_ENTRY(aes_ctr_encrypt)
 	eor		v2.16b, v7.16b, v2.16b
 	eor		v3.16b, v5.16b, v3.16b
 	st1		{v0.16b-v3.16b}, [x0], #64
-	add		x5, x5, #INTERLEAVE
+	add		x8, x8, #INTERLEAVE
 #endif
-	cbz		w4, .LctroutNx
-.LctrincNx:
-	rev		x7, x5
+	rev		x7, x8
 	ins		v4.d[1], x7
+	cbz		w4, .Lctrout
 	b		.LctrloopNx
-.LctroutNx:
-	sub		x5, x5, #1
-	rev		x7, x5
-	ins		v4.d[1], x7
-	b		.Lctrout
 .Lctr1x:
 	adds		w4, w4, #INTERLEAVE
 	beq		.Lctrout
@@ -342,30 +329,39 @@ AES_ENTRY(aes_ctr_encrypt)
 .Lctrloop:
 	mov		v0.16b, v4.16b
 	encrypt_block	v0, w3, x2, x6, w7
+
+	adds		x8, x8, #1		/* increment BE ctr */
+	rev		x7, x8
+	ins		v4.d[1], x7
+	bcs		.Lctrcarry		/* overflow? */
+
+.Lctrcarrydone:
 	subs		w4, w4, #1
 	bmi		.Lctrhalfblock		/* blocks < 0 means 1/2 block */
 	ld1		{v3.16b}, [x1], #16
 	eor		v3.16b, v0.16b, v3.16b
 	st1		{v3.16b}, [x0], #16
-	beq		.Lctrout
-.Lctrinc:
-	adds		x5, x5, #1		/* increment BE ctr */
-	rev		x7, x5
-	ins		v4.d[1], x7
-	bcc		.Lctrloop		/* no overflow? */
-	umov		x7, v4.d[0]		/* load upper word of ctr  */
-	rev		x7, x7			/* ... to handle the carry */
-	add		x7, x7, #1
-	rev		x7, x7
-	ins		v4.d[0], x7
-	b		.Lctrloop
+	bne		.Lctrloop
+
+.Lctrout:
+	st1		{v4.16b}, [x5]		/* return next CTR value */
+	FRAME_POP
+	ret
+
 .Lctrhalfblock:
 	ld1		{v3.8b}, [x1]
 	eor		v3.8b, v0.8b, v3.8b
 	st1		{v3.8b}, [x0]
-.Lctrout:
 	FRAME_POP
 	ret
+
+.Lctrcarry:
+	umov		x7, v4.d[0]		/* load upper word of ctr  */
+	rev		x7, x7			/* ... to handle the carry */
+	add		x7, x7, #1
+	rev		x7, x7
+	ins		v4.d[0], x7
+	b		.Lctrcarrydone
 AES_ENDPROC(aes_ctr_encrypt)
 	.ltorg
 

arch/arm64/include/asm/assembler.h

@@ -164,22 +164,25 @@ lr	.req	x30		// link register
 
 /*
  * Pseudo-ops for PC-relative adr/ldr/str <reg>, <symbol> where
- * <symbol> is within the range +/- 4 GB of the PC.
+ * <symbol> is within the range +/- 4 GB of the PC when running
+ * in core kernel context. In module context, a movz/movk sequence
+ * is used, since modules may be loaded far away from the kernel
+ * when KASLR is in effect.
  */
 	/*
 	 * @dst: destination register (64 bit wide)
 	 * @sym: name of the symbol
-	 * @tmp: optional scratch register to be used if <dst> == sp, which
-	 *       is not allowed in an adrp instruction
 	 */
-	.macro	adr_l, dst, sym, tmp=
-	.ifb	\tmp
+	.macro	adr_l, dst, sym
+#ifndef MODULE
 	adrp	\dst, \sym
 	add	\dst, \dst, :lo12:\sym
-	.else
-	adrp	\tmp, \sym
-	add	\dst, \tmp, :lo12:\sym
-	.endif
+#else
+	movz	\dst, #:abs_g3:\sym
+	movk	\dst, #:abs_g2_nc:\sym
+	movk	\dst, #:abs_g1_nc:\sym
+	movk	\dst, #:abs_g0_nc:\sym
+#endif
 	.endm
 
 	/*
@@ -190,6 +193,7 @@ lr	.req	x30		// link register
 	 *       the address
 	 */
 	.macro	ldr_l, dst, sym, tmp=
+#ifndef MODULE
 	.ifb	\tmp
 	adrp	\dst, \sym
 	ldr	\dst, [\dst, :lo12:\sym]
@@ -197,6 +201,15 @@ lr	.req	x30		// link register
 	adrp	\tmp, \sym
 	ldr	\dst, [\tmp, :lo12:\sym]
 	.endif
+#else
+	.ifb	\tmp
+	adr_l	\dst, \sym
+	ldr	\dst, [\dst]
+	.else
+	adr_l	\tmp, \sym
+	ldr	\dst, [\tmp]
+	.endif
+#endif
 	.endm
 
 	/*
@@ -206,8 +219,13 @@ lr	.req	x30		// link register
 	 *       while <src> needs to be preserved.
 	 */
 	.macro	str_l, src, sym, tmp
+#ifndef MODULE
 	adrp	\tmp, \sym
 	str	\src, [\tmp, :lo12:\sym]
+#else
+	adr_l	\tmp, \sym
+	str	\src, [\tmp]
+#endif
 	.endm
 
 	/*

arch/arm64/include/asm/memory.h

@@ -222,7 +222,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define _virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 #else
 #define __virt_to_pgoff(kaddr)	(((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page))
-#define __page_to_voff(page)	(((u64)(page) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page))
+#define __page_to_voff(kaddr)	(((u64)(kaddr) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page))
 
 #define page_to_virt(page)	((void *)((__page_to_voff(page)) | PAGE_OFFSET))
 #define virt_to_page(vaddr)	((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START))

arch/arm64/include/asm/virt.h

@@ -47,6 +47,7 @@
 #include <asm/ptrace.h>
 #include <asm/sections.h>
 #include <asm/sysreg.h>
+#include <asm/cpufeature.h>
 
 /*
  * __boot_cpu_mode records what mode CPUs were booted in.
@@ -80,6 +81,14 @@ static inline bool is_kernel_in_hyp_mode(void)
 	return read_sysreg(CurrentEL) == CurrentEL_EL2;
 }
 
+static inline bool has_vhe(void)
+{
+	if (cpus_have_const_cap(ARM64_HAS_VIRT_HOST_EXTN))
+		return true;
+
+	return false;
+}
+
 #ifdef CONFIG_ARM64_VHE
 extern void verify_cpu_run_el(void);
 #else

arch/arm64/include/uapi/asm/ptrace.h

@@ -77,6 +77,7 @@ struct user_fpsimd_state {
 	__uint128_t	vregs[32];
 	__u32		fpsr;
 	__u32		fpcr;
+	__u32		__reserved[2];
 };
 
 struct user_hwdebug_state {

arch/arm64/kernel/entry.S

@@ -683,7 +683,7 @@ el0_inv:
 	mov	x0, sp
 	mov	x1, #BAD_SYNC
 	mov	x2, x25
-	bl	bad_mode
+	bl	bad_el0_sync
 	b	ret_to_user
 ENDPROC(el0_sync)
 

arch/arm64/kernel/ptrace.c

@@ -551,6 +551,8 @@ static int hw_break_set(struct task_struct *target,
 	/* (address, ctrl) registers */
 	limit = regset->n * regset->size;
 	while (count && offset < limit) {
+		if (count < PTRACE_HBP_ADDR_SZ)
+			return -EINVAL;
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &addr,
 					 offset, offset + PTRACE_HBP_ADDR_SZ);
 		if (ret)
@@ -560,6 +562,8 @@ static int hw_break_set(struct task_struct *target,
 			return ret;
 		offset += PTRACE_HBP_ADDR_SZ;
 
+		if (!count)
+			break;
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl,
 					 offset, offset + PTRACE_HBP_CTRL_SZ);
 		if (ret)
@@ -596,7 +600,7 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
 		   const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	struct user_pt_regs newregs;
+	struct user_pt_regs newregs = task_pt_regs(target)->user_regs;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newregs, 0, -1);
 	if (ret)
@@ -626,7 +630,8 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		   const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	struct user_fpsimd_state newstate;
+	struct user_fpsimd_state newstate =
+		target->thread.fpsimd_state.user_fpsimd;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate, 0, -1);
 	if (ret)
@@ -650,7 +655,7 @@ static int tls_set(struct task_struct *target, const struct user_regset *regset,
 		   const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	unsigned long tls;
+	unsigned long tls = target->thread.tp_value;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
 	if (ret)
@@ -676,7 +681,8 @@ static int system_call_set(struct task_struct *target,
 			   unsigned int pos, unsigned int count,
 			   const void *kbuf, const void __user *ubuf)
 {
-	int syscallno, ret;
+	int syscallno = task_pt_regs(target)->syscallno;
+	int ret;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &syscallno, 0, -1);
 	if (ret)
@@ -948,7 +954,7 @@ static int compat_tls_set(struct task_struct *target,
 			  const void __user *ubuf)
 {
 	int ret;
-	compat_ulong_t tls;
+	compat_ulong_t tls = target->thread.tp_value;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
 	if (ret)

arch/arm64/kernel/topology.c

@@ -11,6 +11,7 @@
  * for more details.
  */
 
+#include <linux/acpi.h>
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/init.h>
@@ -209,7 +210,12 @@ static struct notifier_block init_cpu_capacity_notifier = {
 
 static int __init register_cpufreq_notifier(void)
 {
-	if (cap_parsing_failed)
+	/*
+	 * on ACPI-based systems we need to use the default cpu capacity
+	 * until we have the necessary code to parse the cpu capacity, so
+	 * skip registering cpufreq notifier.
+	 */
+	if (!acpi_disabled || cap_parsing_failed)
 		return -EINVAL;
 
 	if (!alloc_cpumask_var(&cpus_to_visit, GFP_KERNEL)) {

arch/arm64/kernel/traps.c

@@ -604,17 +604,34 @@ const char *esr_get_class_string(u32 esr)
 }
 
 /*
- * bad_mode handles the impossible case in the exception vector.
+ * bad_mode handles the impossible case in the exception vector. This is always
+ * fatal.
  */
 asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 {
-	siginfo_t info;
-	void __user *pc = (void __user *)instruction_pointer(regs);
 	console_verbose();
 
 	pr_crit("Bad mode in %s handler detected on CPU%d, code 0x%08x -- %s\n",
 		handler[reason], smp_processor_id(), esr,
 		esr_get_class_string(esr));
+
+	die("Oops - bad mode", regs, 0);
+	local_irq_disable();
+	panic("bad mode");
+}
+
+/*
+ * bad_el0_sync handles unexpected, but potentially recoverable synchronous
+ * exceptions taken from EL0. Unlike bad_mode, this returns.
+ */
+asmlinkage void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr)
+{
+	siginfo_t info;
+	void __user *pc = (void __user *)instruction_pointer(regs);
+	console_verbose();
+
+	pr_crit("Bad EL0 synchronous exception detected on CPU%d, code 0x%08x -- %s\n",
+		smp_processor_id(), esr, esr_get_class_string(esr));
 	__show_regs(regs);
 
 	info.si_signo = SIGILL;
@@ -622,7 +639,10 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 	info.si_code  = ILL_ILLOPC;
 	info.si_addr  = pc;
 
-	arm64_notify_die("Oops - bad mode", regs, &info, 0);
+	current->thread.fault_address = 0;
+	current->thread.fault_code = 0;
+
+	force_sig_info(info.si_signo, &info, current);
 }
 
 void __pte_error(const char *file, int line, unsigned long val)

arch/arm64/mm/hugetlbpage.c

@@ -239,7 +239,7 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 		ncontig = find_num_contig(vma->vm_mm, addr, cpte,
 					  *cpte, &pgsize);
 		for (i = 0; i < ncontig; ++i, ++cpte, addr += pgsize) {
-			changed = ptep_set_access_flags(vma, addr, cpte,
+			changed |= ptep_set_access_flags(vma, addr, cpte,
 							pfn_pte(pfn,
 								hugeprot),
 							dirty);

arch/arm64/mm/init.c

@@ -404,6 +404,8 @@ void __init mem_init(void)
 	if (swiotlb_force == SWIOTLB_FORCE ||
 	    max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
 		swiotlb_init(1);
+	else
+		swiotlb_force = SWIOTLB_NO_FORCE;
 
 	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
 

arch/frv/include/asm/atomic.h

@@ -139,7 +139,7 @@ static inline void atomic64_dec(atomic64_t *v)
 #define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
 #define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
 #define atomic64_inc_and_test(v)	(atomic64_inc_return((v)) == 0)
-
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1, 0)
 
 #define atomic_cmpxchg(v, old, new)	(cmpxchg(&(v)->counter, old, new))
 #define atomic_xchg(v, new)		(xchg(&(v)->counter, new))
@@ -161,6 +161,39 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 	return c;
 }
 
+static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u)
+{
+	long long c, old;
+
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == u))
+			break;
+		old = atomic64_cmpxchg(v, c, c + i);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != u;
+}
+
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long long c, old, dec;
+
+	c = atomic64_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic64_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+		return dec;
+}
+
 #define ATOMIC_OP(op)							\
 static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 {									\

arch/mn10300/include/asm/switch_to.h

@@ -16,7 +16,7 @@
 struct task_struct;
 struct thread_struct;
 
-#if !defined(CONFIG_LAZY_SAVE_FPU)
+#if defined(CONFIG_FPU) && !defined(CONFIG_LAZY_SAVE_FPU)
 struct fpu_state_struct;
 extern asmlinkage void fpu_save(struct fpu_state_struct *);
 #define switch_fpu(prev, next)						\

arch/parisc/include/asm/bitops.h

@@ -6,7 +6,7 @@
 #endif
 
 #include <linux/compiler.h>
-#include <asm/types.h>		/* for BITS_PER_LONG/SHIFT_PER_LONG */
+#include <asm/types.h>
 #include <asm/byteorder.h>
 #include <asm/barrier.h>
 #include <linux/atomic.h>
@@ -17,6 +17,12 @@
  * to include/asm-i386/bitops.h or kerneldoc
  */
 
+#if __BITS_PER_LONG == 64
+#define SHIFT_PER_LONG 6
+#else
+#define SHIFT_PER_LONG 5
+#endif
+
 #define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1))
 
 

arch/parisc/include/uapi/asm/bitsperlong.h

@@ -3,10 +3,8 @@
 
 #if defined(__LP64__)
 #define __BITS_PER_LONG 64
-#define SHIFT_PER_LONG 6
 #else
 #define __BITS_PER_LONG 32
-#define SHIFT_PER_LONG 5
 #endif
 
 #include <asm-generic/bitsperlong.h>

arch/parisc/include/uapi/asm/swab.h

@@ -1,6 +1,7 @@
 #ifndef _PARISC_SWAB_H
 #define _PARISC_SWAB_H
 
+#include <asm/bitsperlong.h>
 #include <linux/types.h>
 #include <linux/compiler.h>
 
@@ -38,7 +39,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 }
 #define __arch_swab32 __arch_swab32
 
-#if BITS_PER_LONG > 32
+#if __BITS_PER_LONG > 32
 /*
 ** From "PA-RISC 2.0 Architecture", HP Professional Books.
 ** See Appendix I page 8 , "Endian Byte Swapping".
@@ -61,6 +62,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 	return x;
 }
 #define __arch_swab64 __arch_swab64
-#endif /* BITS_PER_LONG > 32 */
+#endif /* __BITS_PER_LONG > 32 */
 
 #endif /* _PARISC_SWAB_H */

arch/powerpc/Kconfig

@@ -164,7 +164,6 @@ config PPC
 	select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE
 	select HAVE_ARCH_HARDENED_USERCOPY
 	select HAVE_KERNEL_GZIP
-	select HAVE_CC_STACKPROTECTOR
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
@@ -484,6 +483,7 @@ config RELOCATABLE
 	bool "Build a relocatable kernel"
 	depends on (PPC64 && !COMPILE_TEST) || (FLATMEM && (44x || FSL_BOOKE))
 	select NONSTATIC_KERNEL
+	select MODULE_REL_CRCS if MODVERSIONS
 	help
 	  This builds a kernel image that is capable of running at the
 	  location the kernel is loaded at. For ppc32, there is no any

arch/powerpc/include/asm/book3s/64/hash-4k.h

@@ -36,12 +36,13 @@
 #ifdef CONFIG_HUGETLB_PAGE
 static inline int hash__hugepd_ok(hugepd_t hpd)
 {
+	unsigned long hpdval = hpd_val(hpd);
 	/*
 	 * if it is not a pte and have hugepd shift mask
 	 * set, then it is a hugepd directory pointer
 	 */
-	if (!(hpd.pd & _PAGE_PTE) &&
-	    ((hpd.pd & HUGEPD_SHIFT_MASK) != 0))
+	if (!(hpdval & _PAGE_PTE) &&
+	    ((hpdval & HUGEPD_SHIFT_MASK) != 0))
 		return true;
 	return false;
 }

arch/powerpc/include/asm/book3s/64/hash.h

@@ -201,6 +201,10 @@ extern int __meminit hash__vmemmap_create_mapping(unsigned long start,
 					      unsigned long phys);
 extern void hash__vmemmap_remove_mapping(unsigned long start,
 				     unsigned long page_size);
+
+int hash__create_section_mapping(unsigned long start, unsigned long end);
+int hash__remove_section_mapping(unsigned long start, unsigned long end);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_H */

arch/powerpc/include/asm/cpu_has_feature.h

@@ -23,7 +23,9 @@ static __always_inline bool cpu_has_feature(unsigned long feature)
 {
 	int i;
 
+#ifndef __clang__ /* clang can't cope with this */
 	BUILD_BUG_ON(!__builtin_constant_p(feature));
+#endif
 
 #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
 	if (!static_key_initialized) {

arch/powerpc/include/asm/hugetlb.h

@@ -21,12 +21,12 @@ static inline pte_t *hugepd_page(hugepd_t hpd)
 	 * We have only four bits to encode, MMU page size
 	 */
 	BUILD_BUG_ON((MMU_PAGE_COUNT - 1) > 0xf);
-	return __va(hpd.pd & HUGEPD_ADDR_MASK);
+	return __va(hpd_val(hpd) & HUGEPD_ADDR_MASK);
 }
 
 static inline unsigned int hugepd_mmu_psize(hugepd_t hpd)
 {
-	return (hpd.pd & HUGEPD_SHIFT_MASK) >> 2;
+	return (hpd_val(hpd) & HUGEPD_SHIFT_MASK) >> 2;
 }
 
 static inline unsigned int hugepd_shift(hugepd_t hpd)
@@ -52,18 +52,20 @@ static inline pte_t *hugepd_page(hugepd_t hpd)
 {
 	BUG_ON(!hugepd_ok(hpd));
 #ifdef CONFIG_PPC_8xx
-	return (pte_t *)__va(hpd.pd & ~(_PMD_PAGE_MASK | _PMD_PRESENT_MASK));
+	return (pte_t *)__va(hpd_val(hpd) &
+			     ~(_PMD_PAGE_MASK | _PMD_PRESENT_MASK));
 #else
-	return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | PD_HUGE);
+	return (pte_t *)((hpd_val(hpd) &
+			  ~HUGEPD_SHIFT_MASK) | PD_HUGE);
 #endif
 }
 
 static inline unsigned int hugepd_shift(hugepd_t hpd)
 {
 #ifdef CONFIG_PPC_8xx
-	return ((hpd.pd & _PMD_PAGE_MASK) >> 1) + 17;
+	return ((hpd_val(hpd) & _PMD_PAGE_MASK) >> 1) + 17;
 #else
-	return hpd.pd & HUGEPD_SHIFT_MASK;
+	return hpd_val(hpd) & HUGEPD_SHIFT_MASK;
 #endif
 }
 

arch/powerpc/include/asm/mmu.h

@@ -160,7 +160,9 @@ static __always_inline bool mmu_has_feature(unsigned long feature)
 {
 	int i;
 
+#ifndef __clang__ /* clang can't cope with this */
 	BUILD_BUG_ON(!__builtin_constant_p(feature));
+#endif
 
 #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
 	if (!static_key_initialized) {

arch/powerpc/include/asm/module.h

@@ -90,9 +90,5 @@ static inline int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sec
 }
 #endif
 
-#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64)
-#define ARCH_RELOCATES_KCRCTAB
-#define reloc_start PHYSICAL_START
-#endif
 #endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MODULE_H */

arch/powerpc/include/asm/nohash/pgtable.h

@@ -227,9 +227,10 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 static inline int hugepd_ok(hugepd_t hpd)
 {
 #ifdef CONFIG_PPC_8xx
-	return ((hpd.pd & 0x4) != 0);
+	return ((hpd_val(hpd) & 0x4) != 0);
 #else
-	return (hpd.pd > 0);
+	/* We clear the top bit to indicate hugepd */
+	return ((hpd_val(hpd) & PD_HUGE) ==  0);
 #endif
 }
 

arch/powerpc/include/asm/page.h

@@ -294,15 +294,12 @@ extern long long virt_phys_offset;
 #include <asm/pgtable-types.h>
 #endif
 
-typedef struct { signed long pd; } hugepd_t;
 
 #ifndef CONFIG_HUGETLB_PAGE
 #define is_hugepd(pdep)		(0)
 #define pgd_huge(pgd)		(0)
 #endif /* CONFIG_HUGETLB_PAGE */
 
-#define __hugepd(x) ((hugepd_t) { (x) })
-
 struct page;
 extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
 extern void copy_user_page(void *to, void *from, unsigned long vaddr,

arch/powerpc/include/asm/perf_event_server.h

@@ -65,6 +65,7 @@ struct power_pmu {
 #define PPMU_HAS_SSLOT		0x00000020 /* Has sampled slot in MMCRA */
 #define PPMU_HAS_SIER		0x00000040 /* Has SIER */
 #define PPMU_ARCH_207S		0x00000080 /* PMC is architecture v2.07S */
+#define PPMU_NO_SIAR		0x00000100 /* Do not use SIAR */
 
 /*
  * Values for flags to get_alternatives()

arch/powerpc/include/asm/pgtable-be-types.h

@@ -104,4 +104,12 @@ static inline bool pmd_xchg(pmd_t *pmdp, pmd_t old, pmd_t new)
 	return pmd_raw(old) == prev;
 }
 
+typedef struct { __be64 pdbe; } hugepd_t;
+#define __hugepd(x) ((hugepd_t) { cpu_to_be64(x) })
+
+static inline unsigned long hpd_val(hugepd_t x)
+{
+	return be64_to_cpu(x.pdbe);
+}
+
 #endif /* _ASM_POWERPC_PGTABLE_BE_TYPES_H */

arch/powerpc/include/asm/pgtable-types.h

@@ -66,4 +66,11 @@ static inline bool pte_xchg(pte_t *ptep, pte_t old, pte_t new)
 }
 #endif
 
+typedef struct { unsigned long pd; } hugepd_t;
+#define __hugepd(x) ((hugepd_t) { (x) })
+static inline unsigned long hpd_val(hugepd_t x)
+{
+	return x.pd;
+}
+
 #endif /* _ASM_POWERPC_PGTABLE_TYPES_H */

arch/powerpc/include/asm/ppc-opcode.h

@@ -157,7 +157,7 @@
 #define PPC_INST_MCRXR			0x7c000400
 #define PPC_INST_MCRXR_MASK		0xfc0007fe
 #define PPC_INST_MFSPR_PVR		0x7c1f42a6
-#define PPC_INST_MFSPR_PVR_MASK		0xfc1fffff
+#define PPC_INST_MFSPR_PVR_MASK		0xfc1ffffe
 #define PPC_INST_MFTMR			0x7c0002dc
 #define PPC_INST_MSGSND			0x7c00019c
 #define PPC_INST_MSGCLR			0x7c0001dc
@@ -174,13 +174,13 @@
 #define PPC_INST_RFDI			0x4c00004e
 #define PPC_INST_RFMCI			0x4c00004c
 #define PPC_INST_MFSPR_DSCR		0x7c1102a6
-#define PPC_INST_MFSPR_DSCR_MASK	0xfc1fffff
+#define PPC_INST_MFSPR_DSCR_MASK	0xfc1ffffe
 #define PPC_INST_MTSPR_DSCR		0x7c1103a6
-#define PPC_INST_MTSPR_DSCR_MASK	0xfc1fffff
+#define PPC_INST_MTSPR_DSCR_MASK	0xfc1ffffe
 #define PPC_INST_MFSPR_DSCR_USER	0x7c0302a6
-#define PPC_INST_MFSPR_DSCR_USER_MASK	0xfc1fffff
+#define PPC_INST_MFSPR_DSCR_USER_MASK	0xfc1ffffe
 #define PPC_INST_MTSPR_DSCR_USER	0x7c0303a6
-#define PPC_INST_MTSPR_DSCR_USER_MASK	0xfc1fffff
+#define PPC_INST_MTSPR_DSCR_USER_MASK	0xfc1ffffe
 #define PPC_INST_MFVSRD			0x7c000066
 #define PPC_INST_MTVSRD			0x7c000166
 #define PPC_INST_SLBFEE			0x7c0007a7

arch/powerpc/include/asm/stackprotector.h

@@ -1,40 +0,0 @@
-/*
- * GCC stack protector support.
- *
- * Stack protector works by putting predefined pattern at the start of
- * the stack frame and verifying that it hasn't been overwritten when
- * returning from the function.  The pattern is called stack canary
- * and gcc expects it to be defined by a global variable called
- * "__stack_chk_guard" on PPC.  This unfortunately means that on SMP
- * we cannot have a different canary value per task.
- */
-
-#ifndef _ASM_STACKPROTECTOR_H
-#define _ASM_STACKPROTECTOR_H
-
-#include <linux/random.h>
-#include <linux/version.h>
-#include <asm/reg.h>
-
-extern unsigned long __stack_chk_guard;
-
-/*
- * Initialize the stackprotector canary value.
- *
- * NOTE: this must only be called from functions that never return,
- * and it must always be inlined.
- */
-static __always_inline void boot_init_stack_canary(void)
-{
-	unsigned long canary;
-
-	/* Try to get a semi random initial value. */
-	get_random_bytes(&canary, sizeof(canary));
-	canary ^= mftb();
-	canary ^= LINUX_VERSION_CODE;
-
-	current->stack_canary = canary;
-	__stack_chk_guard = current->stack_canary;
-}
-
-#endif	/* _ASM_STACKPROTECTOR_H */

arch/powerpc/kernel/Makefile

@@ -19,10 +19,6 @@ CFLAGS_init.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_btext.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_prom.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 
-# -fstack-protector triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-CFLAGS_prom_init.o += $(call cc-option, -fno-stack-protector)
-
 ifdef CONFIG_FUNCTION_TRACER
 # Do not trace early boot code
 CFLAGS_REMOVE_cputable.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)

arch/powerpc/kernel/asm-offsets.c

@@ -91,9 +91,6 @@ int main(void)
 	DEFINE(TI_livepatch_sp, offsetof(struct thread_info, livepatch_sp));
 #endif
 
-#ifdef CONFIG_CC_STACKPROTECTOR
-	DEFINE(TSK_STACK_CANARY, offsetof(struct task_struct, stack_canary));
-#endif
 	DEFINE(KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
 #ifdef CONFIG_BOOKE

arch/powerpc/kernel/eeh.c

@@ -298,9 +298,17 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 	 *
 	 * For pHyp, we have to enable IO for log retrieval. Otherwise,
 	 * 0xFF's is always returned from PCI config space.
+	 *
+	 * When the @severity is EEH_LOG_PERM, the PE is going to be
+	 * removed. Prior to that, the drivers for devices included in
+	 * the PE will be closed. The drivers rely on working IO path
+	 * to bring the devices to quiet state. Otherwise, PCI traffic
+	 * from those devices after they are removed is like to cause
+	 * another unexpected EEH error.
 	 */
 	if (!(pe->type & EEH_PE_PHB)) {
-		if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG))
+		if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG) ||
+		    severity == EEH_LOG_PERM)
 			eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
 
 		/*

arch/powerpc/kernel/eeh_driver.c

@@ -545,7 +545,7 @@ static void *eeh_pe_detach_dev(void *data, void *userdata)
 static void *__eeh_clear_pe_frozen_state(void *data, void *flag)
 {
 	struct eeh_pe *pe = (struct eeh_pe *)data;
-	bool *clear_sw_state = flag;
+	bool clear_sw_state = *(bool *)flag;
 	int i, rc = 1;
 
 	for (i = 0; rc && i < 3; i++)

arch/powerpc/kernel/entry_32.S

@@ -674,11 +674,7 @@ BEGIN_FTR_SECTION
 	mtspr	SPRN_SPEFSCR,r0		/* restore SPEFSCR reg */
 END_FTR_SECTION_IFSET(CPU_FTR_SPE)
 #endif /* CONFIG_SPE */
-#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	lwz	r0,TSK_STACK_CANARY(r2)
-	lis	r4,__stack_chk_guard@ha
-	stw	r0,__stack_chk_guard@l(r4)
-#endif
+
 	lwz	r0,_CCR(r1)
 	mtcrf	0xFF,r0
 	/* r3-r12 are destroyed -- Cort */

arch/powerpc/kernel/module_64.c

@@ -286,14 +286,6 @@ static void dedotify_versions(struct modversion_info *vers,
 	for (end = (void *)vers + size; vers < end; vers++)
 		if (vers->name[0] == '.') {
 			memmove(vers->name, vers->name+1, strlen(vers->name));
-#ifdef ARCH_RELOCATES_KCRCTAB
-			/* The TOC symbol has no CRC computed. To avoid CRC
-			 * check failing, we must force it to the expected
-			 * value (see CRC check in module.c).
-			 */
-			if (!strcmp(vers->name, "TOC."))
-				vers->crc = -(unsigned long)reloc_start;
-#endif
 		}
 }
 

arch/powerpc/kernel/process.c

@@ -64,12 +64,6 @@
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
 
-#ifdef CONFIG_CC_STACKPROTECTOR
-#include <linux/stackprotector.h>
-unsigned long __stack_chk_guard __read_mostly;
-EXPORT_SYMBOL(__stack_chk_guard);
-#endif
-
 /* Transactional Memory debug */
 #ifdef TM_DEBUG_SW
 #define TM_DEBUG(x...) printk(KERN_INFO x)

arch/powerpc/kernel/prom_init.c

@@ -2834,6 +2834,9 @@ static void __init prom_find_boot_cpu(void)
 
 	cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
 
+	if (!PHANDLE_VALID(cpu_pkg))
+		return;
+
 	prom_getprop(cpu_pkg, "reg", &rval, sizeof(rval));
 	prom.cpu = be32_to_cpu(rval);
 

arch/powerpc/kernel/ptrace.c

@@ -463,6 +463,10 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 
 	flush_fp_to_thread(target);
 
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.TS_FPR(i);
+	buf[32] = target->thread.fp_state.fpscr;
+
 	/* copy to local buffer then write that out */
 	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 	if (i)
@@ -672,6 +676,9 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	flush_altivec_to_thread(target);
 	flush_vsx_to_thread(target);
 
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
 	if (!ret)
@@ -1019,6 +1026,10 @@ static int tm_cfpr_set(struct task_struct *target,
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
 
+	for (i = 0; i < 32; i++)
+		buf[i] = target->thread.TS_CKFPR(i);
+	buf[32] = target->thread.ckfp_state.fpscr;
+
 	/* copy to local buffer then write that out */
 	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 	if (i)
@@ -1283,6 +1294,9 @@ static int tm_cvsx_set(struct task_struct *target,
 	flush_altivec_to_thread(target);
 	flush_vsx_to_thread(target);
 
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
 	if (!ret)