Merge branch 'clk-qcom-8996-halt' into clk-next

* clk-qcom-8996-halt:
  clk: qcom: gcc-msm8996: Disable halt check on UFS clocks
  clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk

drivers/clk/qcom/gcc-msm8996.c

@@ -1418,6 +1418,7 @@ static struct clk_branch gcc_usb3_phy_aux_clk = {
 
 static struct clk_branch gcc_usb3_phy_pipe_clk = {
 	.halt_reg = 0x50004,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x50004,
 		.enable_mask = BIT(0),
@@ -2472,6 +2473,7 @@ static struct clk_branch gcc_pcie_0_aux_clk = {
 
 static struct clk_branch gcc_pcie_0_pipe_clk = {
 	.halt_reg = 0x6b018,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x6b018,
 		.enable_mask = BIT(0),
@@ -2547,6 +2549,7 @@ static struct clk_branch gcc_pcie_1_aux_clk = {
 
 static struct clk_branch gcc_pcie_1_pipe_clk = {
 	.halt_reg = 0x6d018,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x6d018,
 		.enable_mask = BIT(0),
@@ -2622,6 +2625,7 @@ static struct clk_branch gcc_pcie_2_aux_clk = {
 
 static struct clk_branch gcc_pcie_2_pipe_clk = {
 	.halt_reg = 0x6e018,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x6e018,
 		.enable_mask = BIT(0),
@@ -2792,6 +2796,7 @@ static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
 
 static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
 	.halt_reg = 0x7501c,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x7501c,
 		.enable_mask = BIT(0),
@@ -2807,6 +2812,7 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
 
 static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
 	.halt_reg = 0x75020,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x75020,
 		.enable_mask = BIT(0),