Merge branch 'next' into for-linus

Prepare input updates for 4.14 merge window.

Documentation/admin-guide/kernel-parameters.txt

@@ -866,6 +866,15 @@
 
 	dscc4.setup=	[NET]
 
+	dt_cpu_ftrs=	[PPC]
+			Format: {"off" | "known"}
+			Control how the dt_cpu_ftrs device-tree binding is
+			used for CPU feature discovery and setup (if it
+			exists).
+			off: Do not use it, fall back to legacy cpu table.
+			known: Do not pass through unknown features to guests
+			or userspace, only those that the kernel is aware of.
+
 	dump_apple_properties	[X86]
 			Dump name and content of EFI device properties on
 			x86 Macs.  Useful for driver authors to determine
@@ -3802,6 +3811,13 @@
 			expediting.  Set to zero to disable automatic
 			expediting.
 
+	stack_guard_gap=	[MM]
+			override the default stack gap protection. The value
+			is in page units and it defines how many pages prior
+			to (for stacks growing down) resp. after (for stacks
+			growing up) the main stack are reserved for no other
+			mapping. Default value is 256 pages.
+
 	stacktrace	[FTRACE]
 			Enabled the stack tracer on boot up.
 

Documentation/devicetree/bindings/clock/sunxi-ccu.txt

@@ -22,7 +22,8 @@ Required properties :
 - #clock-cells : must contain 1
 - #reset-cells : must contain 1
 
-For the PRCM CCUs on H3/A64, one more clock is needed:
+For the PRCM CCUs on H3/A64, two more clocks are needed:
+- "pll-periph": the SoC's peripheral PLL from the main CCU
 - "iosc": the SoC's internal frequency oscillator
 
 Example for generic CCU:
@@ -39,8 +40,8 @@ Example for PRCM CCU:
 r_ccu: clock@01f01400 {
 	compatible = "allwinner,sun50i-a64-r-ccu";
 	reg = <0x01f01400 0x100>;
-	clocks = <&osc24M>, <&osc32k>, <&iosc>;
-	clock-names = "hosc", "losc", "iosc";
+	clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>;
+	clock-names = "hosc", "losc", "iosc", "pll-periph";
 	#clock-cells = <1>;
 	#reset-cells = <1>;
 };

Documentation/devicetree/bindings/gpio/gpio-mvebu.txt

@@ -41,9 +41,9 @@ Required properties:
 Optional properties:
 
 In order to use the GPIO lines in PWM mode, some additional optional
-properties are required. Only Armada 370 and XP support these properties.
+properties are required.
 
-- compatible: Must contain "marvell,armada-370-xp-gpio"
+- compatible: Must contain "marvell,armada-370-gpio"
 
 - reg: an additional register set is needed, for the GPIO Blink
   Counter on/off registers.
@@ -71,7 +71,7 @@ Example:
 		};
 
 		gpio1: gpio@18140 {
-			compatible = "marvell,armada-370-xp-gpio";
+			compatible = "marvell,armada-370-gpio";
 			reg = <0x18140 0x40>, <0x181c8 0x08>;
 			reg-names = "gpio", "pwm";
 			ngpios = <17>;

Documentation/devicetree/bindings/input/atmel,maxtouch.txt

@@ -22,6 +22,8 @@ Optional properties for main touchpad device:
     experiment to determine which bit corresponds to which input. Use
     KEY_RESERVED for unused padding values.
 
+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+
 Example:
 
 	touch@4b {

Documentation/devicetree/bindings/mfd/stm32-timers.txt

@@ -31,7 +31,7 @@ Example:
 		compatible = "st,stm32-timers";
 		reg = <0x40010000 0x400>;
 		clocks = <&rcc 0 160>;
-		clock-names = "clk_int";
+		clock-names = "int";
 
 		pwm {
 			compatible = "st,stm32-pwm";

Documentation/devicetree/bindings/net/dsa/b53.txt

@@ -34,7 +34,7 @@ Required properties:
       "brcm,bcm6328-switch"
       "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
 
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
 
 Examples:

Documentation/devicetree/bindings/net/dsa/marvell.txt

@@ -26,6 +26,10 @@ Optional properties:
 - interrupt-controller	: Indicates the switch is itself an interrupt
 			  controller. This is used for the PHY interrupts.
 #interrupt-cells = <2>	: Controller uses two cells, number and flag
+- eeprom-length		: Set to the length of an EEPROM connected to the
+			  switch. Must be set if the switch can not detect
+			  the presence and/or size of a connected EEPROM,
+			  otherwise optional.
 - mdio			: Container of PHY and devices on the switches MDIO
 			  bus.
 - mdio?		: Container of PHYs and devices on the external MDIO

Documentation/devicetree/bindings/net/smsc911x.txt

@@ -27,6 +27,7 @@ Optional properties:
   of the device. On many systems this is wired high so the device goes
   out of reset at power-on, but if it is under program control, this
   optional GPIO can wake up in response to it.
+- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies
 
 Examples:
 

Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

@@ -247,7 +247,6 @@ bias-bus-hold		- latch weakly
 bias-pull-up		- pull up the pin
 bias-pull-down		- pull down the pin
 bias-pull-pin-default	- use pin-default pull state
-bi-directional		- pin supports simultaneous input/output operations
 drive-push-pull		- drive actively high and low
 drive-open-drain	- drive with open drain
 drive-open-source	- drive with open source
@@ -260,7 +259,6 @@ input-debounce		- debounce mode with debound time X
 power-source		- select between different power supplies
 low-power-enable	- enable low power mode
 low-power-disable	- disable low power mode
-output-enable		- enable output on pin regardless of output value
 output-low		- set the pin to output mode with low level
 output-high		- set the pin to output mode with high level
 slew-rate		- set the slew rate

Documentation/devicetree/bindings/serio/ps2-gpio.txt

@@ -0,0 +1,23 @@
+Device-Tree binding for ps/2 gpio device
+
+Required properties:
+	- compatible = "ps2-gpio"
+	- data-gpios: the data pin
+	- clk-gpios: the clock pin
+	- interrupts: Should trigger on the falling edge of the clock line.
+
+Optional properties:
+	- write-enable: Indicates whether write function is provided
+	to serio device. Possibly providing the write fn will not work, because
+	of the tough timing requirements.
+
+Example nodes:
+
+ps2@0 {
+	compatible = "ps2-gpio";
+	interrupt-parent = <&gpio>;
+	interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+	data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+	clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+	write-enable;
+};

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -10,6 +10,7 @@ Required properties:
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
   - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
   - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
   - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;

Documentation/gpio/drivers-on-gpio.txt

@@ -84,6 +84,11 @@ hardware descriptions such as device tree or ACPI:
   NAND flash MTD subsystem and provides chip access and partition parsing like
   any other NAND driving hardware.
 
+- ps2-gpio: drivers/input/serio/ps2-gpio.c is used to drive a PS/2 (IBM) serio
+  bus, data and clock line, by bit banging two GPIO lines. It will appear as
+  any other serio bus to the system and makes it possible to connect drivers
+  for e.g. keyboards and other PS/2 protocol based devices.
+
 Apart from this there are special GPIO drivers in subsystems like MMC/SD to
 read card detect and write protect GPIO lines, and in the TTY serial subsystem
 to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The

Documentation/networking/dpaa.txt

@@ -0,0 +1,194 @@
+The QorIQ DPAA Ethernet Driver
+==============================
+
+Authors:
+Madalin Bucur <madalin.bucur@nxp.com>
+Camelia Groza <camelia.groza@nxp.com>
+
+Contents
+========
+
+	- DPAA Ethernet Overview
+	- DPAA Ethernet Supported SoCs
+	- Configuring DPAA Ethernet in your kernel
+	- DPAA Ethernet Frame Processing
+	- DPAA Ethernet Features
+	- Debugging
+
+DPAA Ethernet Overview
+======================
+
+DPAA stands for Data Path Acceleration Architecture and it is a
+set of networking acceleration IPs that are available on several
+generations of SoCs, both on PowerPC and ARM64.
+
+The Freescale DPAA architecture consists of a series of hardware blocks
+that support Ethernet connectivity. The Ethernet driver depends upon the
+following drivers in the Linux kernel:
+
+ - Peripheral Access Memory Unit (PAMU) (* needed only for PPC platforms)
+    drivers/iommu/fsl_*
+ - Frame Manager (FMan)
+    drivers/net/ethernet/freescale/fman
+ - Queue Manager (QMan), Buffer Manager (BMan)
+    drivers/soc/fsl/qbman
+
+A simplified view of the dpaa_eth interfaces mapped to FMan MACs:
+
+  dpaa_eth       /eth0\     ...       /ethN\
+  driver        |      |             |      |
+  -------------   ----   -----------   ----   -------------
+       -Ports  / Tx  Rx \    ...    / Tx  Rx \
+  FMan        |          |         |          |
+       -MACs  |   MAC0   |         |   MACN   |
+             /   dtsec0   \  ...  /   dtsecN   \ (or tgec)
+            /              \     /              \(or memac)
+  ---------  --------------  ---  --------------  ---------
+      FMan, FMan Port, FMan SP, FMan MURAM drivers
+  ---------------------------------------------------------
+      FMan HW blocks: MURAM, MACs, Ports, SP
+  ---------------------------------------------------------
+
+The dpaa_eth relation to the QMan, BMan and FMan:
+              ________________________________
+  dpaa_eth   /            eth0                \
+  driver    /                                  \
+  ---------   -^-   -^-   -^-   ---    ---------
+  QMan driver / \   / \   / \  \   /  | BMan    |
+             |Rx | |Rx | |Tx | |Tx |  | driver  |
+  ---------  |Dfl| |Err| |Cnf| |FQs|  |         |
+  QMan HW    |FQ | |FQ | |FQs| |   |  |         |
+             /   \ /   \ /   \  \ /   |         |
+  ---------   ---   ---   ---   -v-    ---------
+            |        FMan QMI         |         |
+            | FMan HW       FMan BMI  | BMan HW |
+              -----------------------   --------
+
+where the acronyms used above (and in the code) are:
+DPAA = Data Path Acceleration Architecture
+FMan = DPAA Frame Manager
+QMan = DPAA Queue Manager
+BMan = DPAA Buffers Manager
+QMI = QMan interface in FMan
+BMI = BMan interface in FMan
+FMan SP = FMan Storage Profiles
+MURAM = Multi-user RAM in FMan
+FQ = QMan Frame Queue
+Rx Dfl FQ = default reception FQ
+Rx Err FQ = Rx error frames FQ
+Tx Cnf FQ = Tx confirmation FQs
+Tx FQs = transmission frame queues
+dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
+tgec = ten gigabit Ethernet controller (10 Gbps)
+memac = multirate Ethernet MAC (10/100/1000/10000)
+
+DPAA Ethernet Supported SoCs
+============================
+
+The DPAA drivers enable the Ethernet controllers present on the following SoCs:
+
+# PPC
+P1023
+P2041
+P3041
+P4080
+P5020
+P5040
+T1023
+T1024
+T1040
+T1042
+T2080
+T4240
+B4860
+
+# ARM
+LS1043A
+LS1046A
+
+Configuring DPAA Ethernet in your kernel
+========================================
+
+To enable the DPAA Ethernet driver, the following Kconfig options are required:
+
+# common for arch/arm64 and arch/powerpc platforms
+CONFIG_FSL_DPAA=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_XGMAC_MDIO=y
+
+# for arch/powerpc only
+CONFIG_FSL_PAMU=y
+
+# common options needed for the PHYs used on the RDBs
+CONFIG_VITESSE_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_AQUANTIA_PHY=y
+
+DPAA Ethernet Frame Processing
+==============================
+
+On Rx, buffers for the incoming frames are retrieved from one of the three
+existing buffers pools. The driver initializes and seeds these, each with
+buffers of different sizes: 1KB, 2KB and 4KB.
+
+On Tx, all transmitted frames are returned to the driver through Tx
+confirmation frame queues. The driver is then responsible for freeing the
+buffers. In order to do this properly, a backpointer is added to the buffer
+before transmission that points to the skb. When the buffer returns to the
+driver on a confirmation FQ, the skb can be correctly consumed.
+
+DPAA Ethernet Features
+======================
+
+Currently the DPAA Ethernet driver enables the basic features required for
+a Linux Ethernet driver. The support for advanced features will be added
+gradually.
+
+The driver has Rx and Tx checksum offloading for UDP and TCP. Currently the Rx
+checksum offload feature is enabled by default and cannot be controlled through
+ethtool.
+
+The driver has support for multiple prioritized Tx traffic classes. Priorities
+range from 0 (lowest) to 3 (highest). These are mapped to HW workqueues with
+strict priority levels. Each traffic class contains NR_CPU TX queues. By
+default, only one traffic class is enabled and the lowest priority Tx queues
+are used. Higher priority traffic classes can be enabled with the mqprio
+qdisc. For example, all four traffic classes are enabled on an interface with
+the following command. Furthermore, skb priority levels are mapped to traffic
+classes as follows:
+
+	* priorities 0 to 3 - traffic class 0 (low priority)
+	* priorities 4 to 7 - traffic class 1 (medium-low priority)
+	* priorities 8 to 11 - traffic class 2 (medium-high priority)
+	* priorities 12 to 15 - traffic class 3 (high priority)
+
+tc qdisc add dev <int> root handle 1: \
+	 mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1
+
+Debugging
+=========
+
+The following statistics are exported for each interface through ethtool:
+
+	- interrupt count per CPU
+	- Rx packets count per CPU
+	- Tx packets count per CPU
+	- Tx confirmed packets count per CPU
+	- Tx S/G frames count per CPU
+	- Tx error count per CPU
+	- Rx error count per CPU
+	- Rx error count per type
+	- congestion related statistics:
+		- congestion status
+		- time spent in congestion
+		- number of time the device entered congestion
+		- dropped packets count per cause
+
+The driver also exports the following information in sysfs:
+
+	- the FQ IDs for each FQ type
+	/sys/devices/platform/dpaa-ethernet.0/net/<int>/fqids
+
+	- the IDs of the buffer pools in use
+	/sys/devices/platform/dpaa-ethernet.0/net/<int>/bpids

Documentation/networking/scaling.txt

@@ -122,7 +122,7 @@ associated flow of the packet. The hash is either provided by hardware
 or will be computed in the stack. Capable hardware can pass the hash in
 the receive descriptor for the packet; this would usually be the same
 hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in
-skb->rx_hash and can be used elsewhere in the stack as a hash of the
+skb->hash and can be used elsewhere in the stack as a hash of the
 packet’s flow.
 
 Each receive hardware queue has an associated list of CPUs to which

Documentation/networking/tcp.txt

@@ -1,7 +1,7 @@
 TCP protocol
 ============
 
-Last updated: 9 February 2008
+Last updated: 3 June 2017
 
 Contents
 ========
@@ -29,18 +29,19 @@ As of 2.6.13, Linux supports pluggable congestion control algorithms.
 A congestion control mechanism can be registered through functions in
 tcp_cong.c. The functions used by the congestion control mechanism are
 registered via passing a tcp_congestion_ops struct to
-tcp_register_congestion_control. As a minimum name, ssthresh,
-cong_avoid must be valid.
+tcp_register_congestion_control. As a minimum, the congestion control
+mechanism must provide a valid name and must implement either ssthresh,
+cong_avoid and undo_cwnd hooks or the "omnipotent" cong_control hook.
 
 Private data for a congestion control mechanism is stored in tp->ca_priv.
 tcp_ca(tp) returns a pointer to this space.  This is preallocated space - it
 is important to check the size of your private data will fit this space, or
-alternatively space could be allocated elsewhere and a pointer to it could
+alternatively, space could be allocated elsewhere and a pointer to it could
 be stored here.
 
 There are three kinds of congestion control algorithms currently: The
 simplest ones are derived from TCP reno (highspeed, scalable) and just
-provide an alternative the congestion window calculation. More complex
+provide an alternative congestion window calculation. More complex
 ones like BIC try to look at other events to provide better
 heuristics.  There are also round trip time based algorithms like
 Vegas and Westwood+.
@@ -49,21 +50,15 @@ Good TCP congestion control is a complex problem because the algorithm
 needs to maintain fairness and performance. Please review current
 research and RFC's before developing new modules.
 
-The method that is used to determine which congestion control mechanism is
-determined by the setting of the sysctl net.ipv4.tcp_congestion_control.
-The default congestion control will be the last one registered (LIFO);
-so if you built everything as modules, the default will be reno. If you
-build with the defaults from Kconfig, then CUBIC will be builtin (not a
-module) and it will end up the default.
+The default congestion control mechanism is chosen based on the
+DEFAULT_TCP_CONG Kconfig parameter. If you really want a particular default
+value then you can set it using sysctl net.ipv4.tcp_congestion_control. The
+module will be autoloaded if needed and you will get the expected protocol. If
+you ask for an unknown congestion method, then the sysctl attempt will fail.
 
-If you really want a particular default value then you will need
-to set it with the sysctl.  If you use a sysctl, the module will be autoloaded
-if needed and you will get the expected protocol. If you ask for an
-unknown congestion method, then the sysctl attempt will fail.
-
-If you remove a tcp congestion control module, then you will get the next
+If you remove a TCP congestion control module, then you will get the next
 available one. Since reno cannot be built as a module, and cannot be
-deleted, it will always be available.
+removed, it will always be available.
 
 How the new TCP output machine [nyi] works.
 ===========================================

MAINTAINERS

@@ -1172,7 +1172,7 @@ N:	clps711x
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
-M:	Ryan Mallon <rmallon@gmail.com>
+M:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ep93xx/
@@ -1489,13 +1489,15 @@ M:	Gregory Clement <gregory.clement@free-electrons.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-mvebu/
-F:	drivers/rtc/rtc-armada38x.c
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
+F:	arch/arm/configs/mvebu_*_defconfig
+F:	arch/arm/mach-mvebu/
 F:	arch/arm64/boot/dts/marvell/armada*
 F:	drivers/cpufreq/mvebu-cpufreq.c
-F:	arch/arm/configs/mvebu_*_defconfig
+F:	drivers/irqchip/irq-armada-370-xp.c
+F:	drivers/irqchip/irq-mvebu-*
+F:	drivers/rtc/rtc-armada38x.c
 
 ARM/Marvell Berlin SoC support
 M:	Jisheng Zhang <jszhang@marvell.com>
@@ -1721,7 +1723,6 @@ N:	rockchip
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
 M:	Krzysztof Kozlowski <krzk@kernel.org>
-R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
@@ -1829,7 +1830,6 @@ F:	drivers/edac/altera_edac.
 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <patrice.chotard@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	kernel@stlinux.com
 W:	http://www.stlinux.com
 S:	Maintained
 F:	arch/arm/mach-sti/
@@ -2964,7 +2964,7 @@ F:	sound/pci/oxygen/
 
 C6X ARCHITECTURE
 M:	Mark Salter <msalter@redhat.com>
-M:	Aurelien Jacquiot <a-jacquiot@ti.com>
+M:	Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
 L:	linux-c6x-dev@linux-c6x.org
 W:	http://www.linux-c6x.org/wiki/index.php/Main_Page
 S:	Maintained
@@ -5628,7 +5628,7 @@ F:	scripts/get_maintainer.pl
 
 GENWQE (IBM Generic Workqueue Card)
 M:	Frank Haverkamp <haver@linux.vnet.ibm.com>
-M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+M:	Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
 S:	Supported
 F:	drivers/misc/genwqe/
 
@@ -5673,7 +5673,6 @@ F:	tools/testing/selftests/gpio/
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
-M:	Alexandre Courbot <gnurou@gmail.com>
 L:	linux-gpio@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
 S:	Maintained
@@ -7715,7 +7714,7 @@ F:	drivers/platform/x86/hp_accel.c
 
 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
-M:	Jessica Yu <jeyu@redhat.com>
+M:	Jessica Yu <jeyu@kernel.org>
 M:	Jiri Kosina <jikos@kernel.org>
 M:	Miroslav Benes <mbenes@suse.cz>
 R:	Petr Mladek <pmladek@suse.com>
@@ -8516,7 +8515,7 @@ S:	Odd Fixes
 F:	drivers/media/radio/radio-miropcm20*
 
 MELLANOX MLX4 core VPI driver
-M:	Yishai Hadas <yishaih@mellanox.com>
+M:	Tariq Toukan <tariqt@mellanox.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
@@ -8524,7 +8523,6 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx4/
 F:	include/linux/mlx4/
-F:	include/uapi/rdma/mlx4-abi.h
 
 MELLANOX MLX4 IB driver
 M:	Yishai Hadas <yishaih@mellanox.com>
@@ -8534,6 +8532,7 @@ Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 S:	Supported
 F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/
+F:	include/uapi/rdma/mlx4-abi.h
 
 MELLANOX MLX5 core VPI driver
 M:	Saeed Mahameed <saeedm@mellanox.com>
@@ -8546,7 +8545,6 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
-F:	include/uapi/rdma/mlx5-abi.h
 
 MELLANOX MLX5 IB driver
 M:	Matan Barak <matanb@mellanox.com>
@@ -8557,6 +8555,7 @@ Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 S:	Supported
 F:	drivers/infiniband/hw/mlx5/
 F:	include/linux/mlx5/
+F:	include/uapi/rdma/mlx5-abi.h
 
 MELEXIS MLX90614 DRIVER
 M:	Crt Mori <cmo@melexis.com>
@@ -8596,7 +8595,7 @@ S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
 MODULE SUPPORT
-M:	Jessica Yu <jeyu@redhat.com>
+M:	Jessica Yu <jeyu@kernel.org>
 M:	Rusty Russell <rusty@rustcorp.com.au>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
 S:	Maintained
@@ -10458,7 +10457,7 @@ S:	Orphan
 
 PXA RTC DRIVER
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
-L:	rtc-linux@googlegroups.com
+L:	linux-rtc@vger.kernel.org
 S:	Maintained
 
 QAT DRIVER
@@ -10765,7 +10764,7 @@ X:	kernel/torture.c
 REAL TIME CLOCK (RTC) SUBSYSTEM
 M:	Alessandro Zummo <a.zummo@towertech.it>
 M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
-L:	rtc-linux@googlegroups.com
+L:	linux-rtc@vger.kernel.org
 Q:	http://patchwork.ozlabs.org/project/rtc-linux/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git
 S:	Maintained
@@ -11276,7 +11275,6 @@ F:	drivers/media/rc/serial_ir.c
 
 STI CEC DRIVER
 M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
-L:	kernel@stlinux.com
 S:	Maintained
 F:	drivers/staging/media/st-cec/
 F:	Documentation/devicetree/bindings/media/stih-cec.txt
@@ -11786,6 +11784,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c
+F:	arch/arm/boot/dts/da850*
 
 TI DAVINCI SERIES MEDIA DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
@@ -13869,7 +13868,7 @@ S:	Odd fixes
 F:	drivers/net/wireless/wl3501*
 
 WOLFSON MICROELECTRONICS DRIVERS
-L:	patches@opensource.wolfsonmicro.com
+L:	patches@opensource.cirrus.com
 T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION =
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -1437,7 +1437,7 @@ help:
 	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
 	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
 	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
-	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=1   [targets] Check re-compiled c source with $$CHECK (sparse by default)'
 	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
 	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
 	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'

arch/arc/include/asm/processor.h

@@ -86,8 +86,6 @@ struct task_struct;
 #define TSK_K_BLINK(tsk)	TSK_K_REG(tsk, 4)
 #define TSK_K_FP(tsk)		TSK_K_REG(tsk, 0)
 
-#define thread_saved_pc(tsk)	TSK_K_BLINK(tsk)
-
 extern void start_thread(struct pt_regs * regs, unsigned long pc,
 			 unsigned long usp);
 

arch/arc/mm/mmap.c

@@ -65,7 +65,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/arm/Kconfig

@@ -1416,6 +1416,7 @@ choice
 	config VMSPLIT_3G
 		bool "3G/1G user/kernel split"
 	config VMSPLIT_3G_OPT
+		depends on !ARM_LPAE
 		bool "3G/1G user/kernel split (for full 1G low memory)"
 	config VMSPLIT_2G
 		bool "2G/2G user/kernel split"

arch/arm/boot/compressed/efi-header.S

@@ -17,14 +17,13 @@
 		@ there.
 		.inst	'M' | ('Z' << 8) | (0x1310 << 16)   @ tstne r0, #0x4d000
 #else
-		mov	r0, r0
+ AR_CLASS(	mov	r0, r0		)
+  M_CLASS(	nop.w			)
 #endif
 		.endm
 
 		.macro	__EFI_HEADER
 #ifdef CONFIG_EFI_STUB
-		b	__efi_start
-
 		.set	start_offset, __efi_start - start
 		.org	start + 0x3c
 		@

arch/arm/boot/compressed/head.S

@@ -130,19 +130,22 @@ start:
 		.rept	7
 		__nop
 		.endr
-   ARM(		mov	r0, r0		)
-   ARM(		b	1f		)
- THUMB(		badr	r12, 1f		)
- THUMB(		bx	r12		)
+#ifndef CONFIG_THUMB2_KERNEL
+		mov	r0, r0
+#else
+ AR_CLASS(	sub	pc, pc, #3	)	@ A/R: switch to Thumb2 mode
+  M_CLASS(	nop.w			)	@ M: already in Thumb2 mode
+		.thumb
+#endif
+		W(b)	1f
 
 		.word	_magic_sig	@ Magic numbers to help the loader
 		.word	_magic_start	@ absolute load/run zImage address
 		.word	_magic_end	@ zImage end address
 		.word	0x04030201	@ endianness flag
 
- THUMB(		.thumb			)
-1:		__EFI_HEADER
-
+		__EFI_HEADER
+1:
  ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
  AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT

arch/arm/boot/dts/am335x-sl50.dts

@@ -220,7 +220,7 @@
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
 		>;
 	};
 
@@ -280,10 +280,6 @@
 			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
 			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* nDispReset - gpmc_ad14.gpio1_14 */
 			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
-			/* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */
 			/* PDI Bus - Battery system */
 			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
 			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
@@ -384,7 +380,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vmmcsd_fixed>;
 };
 

arch/arm/boot/dts/bcm283x.dtsi

@@ -3,6 +3,11 @@
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
 
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
  * bcm2835.dtsi and bcm2836.dtsi.

arch/arm/boot/dts/imx6ul-14x14-evk.dts

@@ -120,10 +120,16 @@
 
 		ethphy0: ethernet-phy@2 {
 			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };

arch/arm/boot/dts/keystone-k2l-netcp.dtsi

@@ -137,8 +137,8 @@ netcp: netcp@26000000 {
 	/* NetCP address range */
 	ranges = <0 0x26000000 0x1000000>;
 
-	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>;
-	clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk";
+	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+	clock-names = "pa_clk", "ethss_clk", "cpts";
 	dma-coherent;
 
 	ti,navigator-dmas = <&dma_gbe 0>,

arch/arm/boot/dts/keystone-k2l.dtsi

@@ -232,6 +232,14 @@
 			};
 		};
 
+		osr: sram@70000000 {
+			compatible = "mmio-sram";
+			reg = <0x70000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clkosr>;
+		};
+
 		dspgpio0: keystone_dsp_gpio@02620240 {
 			compatible = "ti,keystone-dsp-gpio";
 			gpio-controller;

arch/arm/boot/dts/sunxi-h3-h5.dtsi

@@ -558,10 +558,11 @@
 		};
 
 		r_ccu: clock@1f01400 {
-			compatible = "allwinner,sun50i-a64-r-ccu";
+			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>;
-			clock-names = "hosc", "losc", "iosc";
+			clocks = <&osc24M>, <&osc32k>, <&iosc>,
+				 <&ccu 9>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};

arch/arm/boot/dts/versatile-pb.dts

@@ -1,4 +1,4 @@
-#include <versatile-ab.dts>
+#include "versatile-ab.dts"
 
 / {
 	model = "ARM Versatile PB";

arch/arm/common/mcpm_entry.c

@@ -235,7 +235,7 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
 	return ret;
 }
 
-typedef void (*phys_reset_t)(unsigned long);
+typedef typeof(cpu_reset) phys_reset_t;
 
 void mcpm_cpu_power_down(void)
 {
@@ -300,7 +300,7 @@ void mcpm_cpu_power_down(void)
 	 * on the CPU.
 	 */
 	phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
-	phys_reset(__pa_symbol(mcpm_entry_point));
+	phys_reset(__pa_symbol(mcpm_entry_point), false);
 
 	/* should never get here */
 	BUG();
@@ -389,7 +389,7 @@ static int __init nocache_trampoline(unsigned long _arg)
 	__mcpm_cpu_down(cpu, cluster);
 
 	phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
-	phys_reset(__pa_symbol(mcpm_entry_point));
+	phys_reset(__pa_symbol(mcpm_entry_point), false);
 	BUG();
 }
 

arch/arm/include/asm/device.h

@@ -19,7 +19,8 @@ struct dev_archdata {
 #ifdef CONFIG_XEN
 	const struct dma_map_ops *dev_dma_ops;
 #endif
-	bool dma_coherent;
+	unsigned int dma_coherent:1;
+	unsigned int dma_ops_setup:1;
 };
 
 struct omap_device;

arch/arm/include/asm/pgtable-nommu.h

@@ -66,6 +66,7 @@ typedef pte_t *pte_addr_t;
 #define pgprot_noncached(prot)	(prot)
 #define pgprot_writecombine(prot) (prot)
 #define pgprot_dmacoherent(prot) (prot)
+#define pgprot_device(prot)	(prot)
 
 
 /*

arch/arm/kernel/setup.c

@@ -315,7 +315,7 @@ static void __init cacheid_init(void)
 	if (arch >= CPU_ARCH_ARMv6) {
 		unsigned int cachetype = read_cpuid_cachetype();
 
-		if ((arch == CPU_ARCH_ARMv7M) && !cachetype) {
+		if ((arch == CPU_ARCH_ARMv7M) && !(cachetype & 0xf000f)) {
 			cacheid = 0;
 		} else if ((cachetype & (7 << 29)) == 4 << 29) {
 			/* ARMv7 register format */

arch/arm/kvm/init.S

@@ -104,7 +104,6 @@ __do_hyp_init:
 	@  - Write permission implies XN: disabled
 	@  - Instruction cache: enabled
 	@  - Data/Unified cache: enabled
-	@  - Memory alignment checks: enabled
 	@  - MMU: enabled (this code must be run from an identity mapping)
 	mrc	p15, 4, r0, c1, c0, 0	@ HSCR
 	ldr	r2, =HSCTLR_MASK
@@ -112,8 +111,8 @@ __do_hyp_init:
 	mrc	p15, 0, r1, c1, c0, 0	@ SCTLR
 	ldr	r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
 	and	r1, r1, r2
- ARM(	ldr	r2, =(HSCTLR_M | HSCTLR_A)			)
- THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE)		)
+ ARM(	ldr	r2, =(HSCTLR_M)					)
+ THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_TE)			)
 	orr	r1, r1, r2
 	orr	r0, r0, r1
 	mcr	p15, 4, r0, c1, c0, 0	@ HSCR

arch/arm/mach-at91/Kconfig

@@ -1,6 +1,7 @@
 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
+	select ARM_CPU_SUSPEND if PM
 	select COMMON_CLK_AT91
 	select GPIOLIB
 	select PINCTRL

arch/arm/mach-davinci/pm.c

@@ -153,7 +153,8 @@ int __init davinci_pm_init(void)
 	davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
 	if (!davinci_sram_suspend) {
 		pr_err("PM: cannot allocate SRAM memory\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto no_sram_mem;
 	}
 
 	davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
@@ -161,6 +162,10 @@ int __init davinci_pm_init(void)
 
 	suspend_set_ops(&davinci_pm_ops);
 
+	return 0;
+
+no_sram_mem:
+	iounmap(pm_config.ddrpsc_reg_base);
 no_ddrpsc_mem:
 	iounmap(pm_config.ddrpll_reg_base);
 no_ddrpll_mem:

arch/arm/mach-pxa/raumfeld.c

@@ -377,7 +377,7 @@ static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
 	},
 };
 
-static struct property_entry raumfeld_rotary_properties[] = {
+static const struct property_entry raumfeld_rotary_properties[] __initconst = {
 	PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
 	PROPERTY_ENTRY_INTEGER("linux,axis",			  u32, REL_X),
 	PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",	  u32, 1),

arch/arm/mm/dma-mapping.c

@@ -2311,7 +2311,14 @@ int arm_iommu_attach_device(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(arm_iommu_attach_device);
 
-static void __arm_iommu_detach_device(struct device *dev)
+/**
+ * arm_iommu_detach_device
+ * @dev: valid struct device pointer
+ *
+ * Detaches the provided device from a previously attached map.
+ * This voids the dma operations (dma_map_ops pointer)
+ */
+void arm_iommu_detach_device(struct device *dev)
 {
 	struct dma_iommu_mapping *mapping;
 
@@ -2324,22 +2331,10 @@ static void __arm_iommu_detach_device(struct device *dev)
 	iommu_detach_device(mapping->domain, dev);
 	kref_put(&mapping->kref, release_iommu_mapping);
 	to_dma_iommu_mapping(dev) = NULL;
+	set_dma_ops(dev, NULL);
 
 	pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
 }
-
-/**
- * arm_iommu_detach_device
- * @dev: valid struct device pointer
- *
- * Detaches the provided device from a previously attached map.
- * This voids the dma operations (dma_map_ops pointer)
- */
-void arm_iommu_detach_device(struct device *dev)
-{
-	__arm_iommu_detach_device(dev);
-	set_dma_ops(dev, NULL);
-}
 EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
 
 static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
@@ -2379,7 +2374,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 	if (!mapping)
 		return;
 
-	__arm_iommu_detach_device(dev);
+	arm_iommu_detach_device(dev);
 	arm_iommu_release_mapping(mapping);
 }
 
@@ -2430,9 +2425,13 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 		dev->dma_ops = xen_dma_ops;
 	}
 #endif
+	dev->archdata.dma_ops_setup = true;
 }
 
 void arch_teardown_dma_ops(struct device *dev)
 {
+	if (!dev->archdata.dma_ops_setup)
+		return;
+
 	arm_teardown_iommu_dma_ops(dev);
 }

arch/arm/mm/mmap.c

@@ -90,7 +90,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 
@@ -141,7 +141,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-				(!vma || addr + len <= vma->vm_start))
+				(!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/arm/mm/mmu.c

@@ -1218,15 +1218,15 @@ void __init adjust_lowmem_bounds(void)
 
 	high_memory = __va(arm_lowmem_limit - 1) + 1;
 
+	if (!memblock_limit)
+		memblock_limit = arm_lowmem_limit;
+
 	/*
 	 * Round the memblock limit down to a pmd size.  This
 	 * helps to ensure that we will allocate memory from the
 	 * last full pmd, which should be mapped.
 	 */
-	if (memblock_limit)
-		memblock_limit = round_down(memblock_limit, PMD_SIZE);
-	if (!memblock_limit)
-		memblock_limit = arm_lowmem_limit;
+	memblock_limit = round_down(memblock_limit, PMD_SIZE);
 
 	if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
 		if (memblock_end_of_DRAM() > arm_lowmem_limit) {

arch/arm64/Kconfig

@@ -1084,10 +1084,6 @@ config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC
 
-config KEYS_COMPAT
-	def_bool y
-	depends on COMPAT && KEYS
-
 endmenu
 
 menu "Power management options"

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -406,8 +406,9 @@
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun50i-a64-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>;
-			clock-names = "hosc", "losc", "iosc";
+			clocks = <&osc24M>, <&osc32k>, <&iosc>,
+				 <&ccu 11>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};

arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi

@@ -40,7 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "sunxi-h3-h5.dtsi"
+#include <arm/sunxi-h3-h5.dtsi>
 
 / {
 	cpus {

arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi

@@ -1 +0,0 @@
-../../../../arm/boot/dts/sunxi-h3-h5.dtsi

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -231,8 +231,7 @@
 			cpm_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -221,8 +221,7 @@
 			cps_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/configs/defconfig

@@ -68,6 +68,7 @@ CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCI_AARDVARK=y
 CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_ROCKCHIP=m
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
 CONFIG_ARM64_VA_BITS_48=y
@@ -208,6 +209,8 @@ CONFIG_BRCMFMAC=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADC=m
+CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
@@ -263,6 +266,7 @@ CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
+CONFIG_SPI_ROCKCHIP=y
 CONFIG_SPI_S3C64XX=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
@@ -292,6 +296,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MESON_GXBB_WATCHDOG=m
@@ -300,12 +305,14 @@ CONFIG_RENESAS_WDT=y
 CONFIG_BCM2835_WDT=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_EXYNOS_LPASS=m
 CONFIG_MFD_HI655X_PMIC=y
 CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI655X=y
@@ -473,8 +480,10 @@ CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
+CONFIG_ROCKCHIP_SARADC=m
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=m
+CONFIG_PWM_CROS_EC=m
 CONFIG_PWM_MESON=m
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
@@ -484,6 +493,7 @@ CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_PCIE=m
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_ARM_SCPI_PROTOCOL=y

arch/arm64/include/asm/acpi.h

@@ -23,9 +23,9 @@
 #define ACPI_MADT_GICC_LENGTH	\
 	(acpi_gbl_FADT.header.revision < 6 ? 76 : 80)
 
-#define BAD_MADT_GICC_ENTRY(entry, end)						\
-	(!(entry) || (unsigned long)(entry) + sizeof(*(entry)) > (end) ||	\
-	 (entry)->header.length != ACPI_MADT_GICC_LENGTH)
+#define BAD_MADT_GICC_ENTRY(entry, end)					\
+	(!(entry) || (entry)->header.length != ACPI_MADT_GICC_LENGTH ||	\
+	(unsigned long)(entry) + ACPI_MADT_GICC_LENGTH > (end))
 
 /* Basic configuration for ACPI */
 #ifdef	CONFIG_ACPI

arch/arm64/include/asm/sysreg.h

@@ -286,6 +286,10 @@
 #define SCTLR_ELx_A	(1 << 1)
 #define SCTLR_ELx_M	1
 
+#define SCTLR_EL2_RES1	((1 << 4)  | (1 << 5)  | (1 << 11) | (1 << 16) | \
+			 (1 << 16) | (1 << 18) | (1 << 22) | (1 << 23) | \
+			 (1 << 28) | (1 << 29))
+
 #define SCTLR_ELx_FLAGS	(SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
 			 SCTLR_ELx_SA | SCTLR_ELx_I)
 

arch/arm64/kernel/pci.c

@@ -191,8 +191,10 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 		return NULL;
 
 	root_ops = kzalloc_node(sizeof(*root_ops), GFP_KERNEL, node);
-	if (!root_ops)
+	if (!root_ops) {
+		kfree(ri);
 		return NULL;
+	}
 
 	ri->cfg = pci_acpi_setup_ecam_mapping(root);
 	if (!ri->cfg) {

arch/arm64/kernel/vdso.c

@@ -221,10 +221,11 @@ void update_vsyscall(struct timekeeper *tk)
 		/* tkr_mono.cycle_last == tkr_raw.cycle_last */
 		vdso_data->cs_cycle_last	= tk->tkr_mono.cycle_last;
 		vdso_data->raw_time_sec		= tk->raw_time.tv_sec;
-		vdso_data->raw_time_nsec	= tk->raw_time.tv_nsec;
+		vdso_data->raw_time_nsec	= (tk->raw_time.tv_nsec <<
+						   tk->tkr_raw.shift) +
+						  tk->tkr_raw.xtime_nsec;
 		vdso_data->xtime_clock_sec	= tk->xtime_sec;
 		vdso_data->xtime_clock_nsec	= tk->tkr_mono.xtime_nsec;
-		/* tkr_raw.xtime_nsec == 0 */
 		vdso_data->cs_mono_mult		= tk->tkr_mono.mult;
 		vdso_data->cs_raw_mult		= tk->tkr_raw.mult;
 		/* tkr_mono.shift == tkr_raw.shift */

arch/arm64/kernel/vdso/gettimeofday.S

@@ -256,7 +256,6 @@ monotonic_raw:
 	seqcnt_check fail=monotonic_raw
 
 	/* All computations are done with left-shifted nsecs. */
-	lsl	x14, x14, x12
 	get_nsec_per_sec res=x9
 	lsl	x9, x9, x12
 

arch/arm64/kvm/hyp-init.S

@@ -106,10 +106,13 @@ __do_hyp_init:
 	tlbi	alle2
 	dsb	sy
 
-	mrs	x4, sctlr_el2
-	and	x4, x4, #SCTLR_ELx_EE	// preserve endianness of EL2
-	ldr	x5, =SCTLR_ELx_FLAGS
-	orr	x4, x4, x5
+	/*
+	 * Preserve all the RES1 bits while setting the default flags,
+	 * as well as the EE bit on BE. Drop the A flag since the compiler
+	 * is allowed to generate unaligned accesses.
+	 */
+	ldr	x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
+CPU_BE(	orr	x4, x4, #SCTLR_ELx_EE)
 	msr	sctlr_el2, x4
 	isb
 

arch/arm64/kvm/vgic-sys-reg-v3.c

@@ -65,8 +65,8 @@ static bool access_gic_ctlr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		 * Here set VMCR.CTLR in ICC_CTLR_EL1 layout.
 		 * The vgic_set_vmcr() will convert to ICH_VMCR layout.
 		 */
-		vmcr.ctlr = val & ICC_CTLR_EL1_CBPR_MASK;
-		vmcr.ctlr |= val & ICC_CTLR_EL1_EOImode_MASK;
+		vmcr.cbpr = (val & ICC_CTLR_EL1_CBPR_MASK) >> ICC_CTLR_EL1_CBPR_SHIFT;
+		vmcr.eoim = (val & ICC_CTLR_EL1_EOImode_MASK) >> ICC_CTLR_EL1_EOImode_SHIFT;
 		vgic_set_vmcr(vcpu, &vmcr);
 	} else {
 		val = 0;
@@ -83,8 +83,8 @@ static bool access_gic_ctlr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		 * The VMCR.CTLR value is in ICC_CTLR_EL1 layout.
 		 * Extract it directly using ICC_CTLR_EL1 reg definitions.
 		 */
-		val |= vmcr.ctlr & ICC_CTLR_EL1_CBPR_MASK;
-		val |= vmcr.ctlr & ICC_CTLR_EL1_EOImode_MASK;
+		val |= (vmcr.cbpr << ICC_CTLR_EL1_CBPR_SHIFT) & ICC_CTLR_EL1_CBPR_MASK;
+		val |= (vmcr.eoim << ICC_CTLR_EL1_EOImode_SHIFT) & ICC_CTLR_EL1_EOImode_MASK;
 
 		p->regval = val;
 	}
@@ -135,7 +135,7 @@ static bool access_gic_bpr1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		p->regval = 0;
 
 	vgic_get_vmcr(vcpu, &vmcr);
-	if (!((vmcr.ctlr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT)) {
+	if (!vmcr.cbpr) {
 		if (p->is_write) {
 			vmcr.abpr = (p->regval & ICC_BPR1_EL1_MASK) >>
 				     ICC_BPR1_EL1_SHIFT;

arch/arm64/net/bpf_jit_comp.c

@@ -36,6 +36,7 @@ int bpf_jit_enable __read_mostly;
 #define TMP_REG_1 (MAX_BPF_JIT_REG + 0)
 #define TMP_REG_2 (MAX_BPF_JIT_REG + 1)
 #define TCALL_CNT (MAX_BPF_JIT_REG + 2)
+#define TMP_REG_3 (MAX_BPF_JIT_REG + 3)
 
 /* Map BPF registers to A64 registers */
 static const int bpf2a64[] = {
@@ -57,6 +58,7 @@ static const int bpf2a64[] = {
 	/* temporary registers for internal BPF JIT */
 	[TMP_REG_1] = A64_R(10),
 	[TMP_REG_2] = A64_R(11),
+	[TMP_REG_3] = A64_R(12),
 	/* tail_call_cnt */
 	[TCALL_CNT] = A64_R(26),
 	/* temporary register for blinding constants */
@@ -319,6 +321,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	const u8 src = bpf2a64[insn->src_reg];
 	const u8 tmp = bpf2a64[TMP_REG_1];
 	const u8 tmp2 = bpf2a64[TMP_REG_2];
+	const u8 tmp3 = bpf2a64[TMP_REG_3];
 	const s16 off = insn->off;
 	const s32 imm = insn->imm;
 	const int i = insn - ctx->prog->insnsi;
@@ -689,10 +692,10 @@ emit_cond_jmp:
 		emit(A64_PRFM(tmp, PST, L1, STRM), ctx);
 		emit(A64_LDXR(isdw, tmp2, tmp), ctx);
 		emit(A64_ADD(isdw, tmp2, tmp2, src), ctx);
-		emit(A64_STXR(isdw, tmp2, tmp, tmp2), ctx);
+		emit(A64_STXR(isdw, tmp2, tmp, tmp3), ctx);
 		jmp_offset = -3;
 		check_imm19(jmp_offset);
-		emit(A64_CBNZ(0, tmp2, jmp_offset), ctx);
+		emit(A64_CBNZ(0, tmp3, jmp_offset), ctx);
 		break;
 
 	/* R0 = ntohx(*(size *)(((struct sk_buff *)R6)->data + imm)) */

arch/blackfin/include/asm/processor.h

@@ -75,11 +75,6 @@ static inline void release_thread(struct task_struct *dead_task)
 {
 }
 
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)	(tsk->thread.pc)
-
 unsigned long get_wchan(struct task_struct *p);
 
 #define	KSTK_EIP(tsk)							\

arch/c6x/include/asm/processor.h

@@ -95,11 +95,6 @@ static inline void release_thread(struct task_struct *dead_task)
 #define copy_segments(tsk, mm)		do { } while (0)
 #define release_segments(mm)		do { } while (0)
 
-/*
- * saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk) (task_pt_regs(tsk)->pc)
-
 /*
  * saved kernel SP and DP of a blocked thread.
  */

arch/cris/arch-v10/kernel/process.c

@@ -69,14 +69,6 @@ void hard_reset_now (void)
 	while(1) /* waiting for RETRIBUTION! */ ;
 }
 
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *t)
-{
-	return task_pt_regs(t)->irp;
-}
-
 /* setup the child's kernel stack with a pt_regs and switch_stack on it.
  * it will be un-nested during _resume and _ret_from_sys_call when the
  * new thread is scheduled.

arch/cris/arch-v32/kernel/process.c

@@ -84,14 +84,6 @@ hard_reset_now(void)
 		; /* Wait for reset. */
 }
 
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *t)
-{
-	return task_pt_regs(t)->erp;
-}
-
 /*
  * Setup the child's kernel stack with a pt_regs and call switch_stack() on it.
  * It will be unnested during _resume and _ret_from_sys_call when the new thread

arch/cris/include/asm/processor.h

@@ -52,8 +52,6 @@ unsigned long get_wchan(struct task_struct *p);
 
 #define KSTK_ESP(tsk)   ((tsk) == current ? rdusp() : (tsk)->thread.usp)
 
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
 /* Free all resources held by a thread. */
 static inline void release_thread(struct task_struct *dead_task)
 {

arch/frv/include/asm/processor.h

@@ -96,11 +96,6 @@ extern asmlinkage void *restore_user_regs(const struct user_context *target, ...
 #define release_segments(mm)		do { } while (0)
 #define forget_segments()		do { } while (0)
 
-/*
- * Return saved PC of a blocked thread.
- */
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
 unsigned long get_wchan(struct task_struct *p);
 
 #define	KSTK_EIP(tsk)	((tsk)->thread.frame0->pc)

arch/frv/include/asm/timex.h

@@ -16,5 +16,11 @@ static inline cycles_t get_cycles(void)
 #define vxtime_lock()		do {} while (0)
 #define vxtime_unlock()		do {} while (0)
 
+/* This attribute is used in include/linux/jiffies.h alongside with
+ * __cacheline_aligned_in_smp. It is assumed that __cacheline_aligned_in_smp
+ * for frv does not contain another section specification.
+ */
+#define __jiffy_arch_data	__attribute__((__section__(".data")))
+
 #endif
 

arch/frv/kernel/process.c

@@ -198,15 +198,6 @@ unsigned long get_wchan(struct task_struct *p)
 	return 0;
 }
 
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	/* Check whether the thread is blocked in resume() */
-	if (in_sched_functions(tsk->thread.pc))
-		return ((unsigned long *)tsk->thread.fp)[2];
-	else
-		return tsk->thread.pc;
-}
-
 int elf_check_arch(const struct elf32_hdr *hdr)
 {
 	unsigned long hsr0 = __get_HSR(0);

arch/frv/mm/elf-fdpic.c

@@ -75,7 +75,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(current->mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			goto success;
 	}
 

arch/h8300/include/asm/processor.h

@@ -110,10 +110,6 @@ static inline void release_thread(struct task_struct *dead_task)
 {
 }
 
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk);
 unsigned long get_wchan(struct task_struct *p);
 
 #define	KSTK_EIP(tsk)	\

arch/h8300/kernel/process.c

@@ -129,11 +129,6 @@ int copy_thread(unsigned long clone_flags,
 	return 0;
 }
 
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	return ((struct pt_regs *)tsk->thread.esp0)->pc;
-}
-
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long fp, pc;

arch/hexagon/include/asm/processor.h

@@ -33,9 +33,6 @@
 /*  task_struct, defined elsewhere, is the "process descriptor" */
 struct task_struct;
 
-/*  this is defined in arch/process.c  */
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
 extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
 
 /*

arch/hexagon/kernel/process.c

@@ -60,14 +60,6 @@ void arch_cpu_idle(void)
 	local_irq_enable();
 }
 
-/*
- *  Return saved PC of a blocked thread
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	return 0;
-}
-
 /*
  * Copy architecture-specific thread state
  */

arch/hexagon/mm/uaccess.c

@@ -37,15 +37,14 @@ __kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count)
 	long uncleared;
 
 	while (count > PAGE_SIZE) {
-		uncleared = __copy_to_user_hexagon(dest, &empty_zero_page,
-						PAGE_SIZE);
+		uncleared = raw_copy_to_user(dest, &empty_zero_page, PAGE_SIZE);
 		if (uncleared)
 			return count - (PAGE_SIZE - uncleared);
 		count -= PAGE_SIZE;
 		dest += PAGE_SIZE;
 	}
 	if (count)
-		count = __copy_to_user_hexagon(dest, &empty_zero_page, count);
+		count = raw_copy_to_user(dest, &empty_zero_page, count);
 
 	return count;
 }

arch/ia64/include/asm/processor.h

@@ -601,23 +601,6 @@ ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat)
 	*unat = (*unat & ~mask) | (nat << bit);
 }
 
-/*
- * Return saved PC of a blocked thread.
- * Note that the only way T can block is through a call to schedule() -> switch_to().
- */
-static inline unsigned long
-thread_saved_pc (struct task_struct *t)
-{
-	struct unw_frame_info info;
-	unsigned long ip;
-
-	unw_init_from_blocked_task(&info, t);
-	if (unw_unwind(&info) < 0)
-		return 0;
-	unw_get_ip(&info, &ip);
-	return ip;
-}
-
 /*
  * Get the current instruction/program counter value.
  */

arch/m32r/include/asm/processor.h

@@ -122,8 +122,6 @@ extern void release_thread(struct task_struct *);
 extern void copy_segments(struct task_struct *p, struct mm_struct * mm);
 extern void release_segments(struct mm_struct * mm);
 
-extern unsigned long thread_saved_pc(struct task_struct *);
-
 /* Copy and release all segment info associated with a VM */
 #define copy_segments(p, mm)  do { } while (0)
 #define release_segments(mm)  do { } while (0)

arch/m32r/kernel/process.c

@@ -39,14 +39,6 @@
 
 #include <linux/err.h>
 
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	return tsk->thread.lr;
-}
-
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 

arch/m68k/include/asm/processor.h

@@ -130,8 +130,6 @@ static inline void release_thread(struct task_struct *dead_task)
 {
 }
 
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
 unsigned long get_wchan(struct task_struct *p);
 
 #define	KSTK_EIP(tsk)	\

arch/m68k/kernel/process.c

@@ -40,20 +40,6 @@
 asmlinkage void ret_from_fork(void);
 asmlinkage void ret_from_kernel_thread(void);
 
-
-/*
- * Return saved PC from a blocked thread
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
-	/* Check whether the thread is blocked in resume() */
-	if (in_sched_functions(sw->retpc))
-		return ((unsigned long *)sw->a6)[1];
-	else
-		return sw->retpc;
-}
-
 void arch_cpu_idle(void)
 {
 #if defined(MACH_ATARI_ONLY)

arch/microblaze/include/asm/processor.h

@@ -69,8 +69,6 @@ static inline void release_thread(struct task_struct *dead_task)
 {
 }
 
-extern unsigned long thread_saved_pc(struct task_struct *t);
-
 extern unsigned long get_wchan(struct task_struct *p);
 
 # define KSTK_EIP(tsk)	(0)
@@ -121,10 +119,6 @@ static inline void release_thread(struct task_struct *dead_task)
 {
 }
 
-/* Return saved (kernel) PC of a blocked thread.  */
-#  define thread_saved_pc(tsk)	\
-	((tsk)->thread.regs ? (tsk)->thread.regs->r15 : 0)
-
 unsigned long get_wchan(struct task_struct *p);
 
 /* The size allocated for kernel stacks. This _must_ be a power of two! */

arch/microblaze/kernel/process.c

@@ -119,23 +119,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	return 0;
 }
 
-#ifndef CONFIG_MMU
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	struct cpu_context *ctx =
-		&(((struct thread_info *)(tsk->stack))->cpu_context);
-
-	/* Check whether the thread is blocked in resume() */
-	if (in_sched_functions(ctx->r15))
-		return (unsigned long)ctx->r15;
-	else
-		return ctx->r14;
-}
-#endif
-
 unsigned long get_wchan(struct task_struct *p)
 {
 /* TBD (used by procfs) */

arch/mips/boot/Makefile

@@ -128,19 +128,19 @@ quiet_cmd_cpp_its_S = ITS     $@
 			-DADDR_BITS=$(ADDR_BITS) \
 			-DADDR_CELLS=$(itb_addr_cells)
 
-$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
 
-$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
 
-$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX)  FORCE
 	$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
 
-$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
 
-$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
 
 quiet_cmd_itb-image = ITB     $@

arch/mips/include/asm/highmem.h

@@ -35,7 +35,12 @@ extern pte_t *pkmap_page_table;
  * easily, subsequent pte tables have to be allocated in one physical
  * chunk of RAM.
  */
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+#define LAST_PKMAP 512
+#else
 #define LAST_PKMAP 1024
+#endif
+
 #define LAST_PKMAP_MASK (LAST_PKMAP-1)
 #define PKMAP_NR(virt)	((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)	(PKMAP_BASE + ((nr) << PAGE_SHIFT))

arch/mips/include/asm/kprobes.h

@@ -43,7 +43,8 @@ typedef union mips_instruction kprobe_opcode_t;
 
 #define flush_insn_slot(p)						\
 do {									\
-	flush_icache_range((unsigned long)p->addr,			\
+	if (p->addr)							\
+		flush_icache_range((unsigned long)p->addr,		\
 			   (unsigned long)p->addr +			\
 			   (MAX_INSN_SIZE * sizeof(kprobe_opcode_t)));	\
 } while (0)

arch/mips/include/asm/pgtable-32.h

@@ -19,6 +19,10 @@
 #define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
+#ifdef CONFIG_HIGHMEM
+#include <asm/highmem.h>
+#endif
+
 extern int temp_tlb_entry;
 
 /*
@@ -62,7 +66,8 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 
 #define VMALLOC_START	  MAP_BASE
 
-#define PKMAP_BASE		(0xfe000000UL)
+#define PKMAP_END	((FIXADDR_START) & ~((LAST_PKMAP << PAGE_SHIFT)-1))
+#define PKMAP_BASE	(PKMAP_END - PAGE_SIZE * LAST_PKMAP)
 
 #ifdef CONFIG_HIGHMEM
 # define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)

arch/mips/kernel/branch.c

@@ -804,8 +804,10 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 			break;
 		}
 		/* Compact branch: BNEZC || JIALC */
-		if (insn.i_format.rs)
+		if (!insn.i_format.rs) {
+			/* JIALC: set $31/ra */
 			regs->regs[31] = epc + 4;
+		}
 		regs->cp0_epc += 8;
 		break;
 #endif

arch/mips/kernel/entry.S

@@ -11,6 +11,7 @@
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
 #include <asm/compiler.h>
+#include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
@@ -119,6 +120,7 @@ work_pending:
 	andi	t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS
 	beqz	t0, work_notifysig
 work_resched:
+	TRACE_IRQS_OFF
 	jal	schedule
 
 	local_irq_disable		# make sure need_resched and
@@ -155,6 +157,7 @@ syscall_exit_work:
 	beqz	t0, work_pending	# trace bit set?
 	local_irq_enable		# could let syscall_trace_leave()
 					# call schedule() instead
+	TRACE_IRQS_ON
 	move	a0, sp
 	jal	syscall_trace_leave
 	b	resume_userspace

arch/mips/kernel/ftrace.c

@@ -38,20 +38,6 @@ void arch_ftrace_update_code(int command)
 
 #endif
 
-/*
- * Check if the address is in kernel space
- *
- * Clone core_kernel_text() from kernel/extable.c, but doesn't call
- * init_kernel_text() for Ftrace doesn't trace functions in init sections.
- */
-static inline int in_kernel_space(unsigned long ip)
-{
-	if (ip >= (unsigned long)_stext &&
-	    ip <= (unsigned long)_etext)
-		return 1;
-	return 0;
-}
-
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
@@ -198,7 +184,7 @@ int ftrace_make_nop(struct module *mod,
 	 * If ip is in kernel space, no long call, otherwise, long call is
 	 * needed.
 	 */
-	new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
+	new = core_kernel_text(ip) ? INSN_NOP : INSN_B_1F;
 #ifdef CONFIG_64BIT
 	return ftrace_modify_code(ip, new);
 #else
@@ -218,12 +204,12 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	unsigned int new;
 	unsigned long ip = rec->ip;
 
-	new = in_kernel_space(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0];
+	new = core_kernel_text(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0];
 
 #ifdef CONFIG_64BIT
 	return ftrace_modify_code(ip, new);
 #else
-	return ftrace_modify_code_2r(ip, new, in_kernel_space(ip) ?
+	return ftrace_modify_code_2r(ip, new, core_kernel_text(ip) ?
 						INSN_NOP : insn_la_mcount[1]);
 #endif
 }
@@ -289,7 +275,7 @@ unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
 	 * instruction "lui v1, hi_16bit_of_mcount"(offset is 24), but for
 	 * kernel, move after the instruction "move ra, at"(offset is 16)
 	 */
-	ip = self_ra - (in_kernel_space(self_ra) ? 16 : 24);
+	ip = self_ra - (core_kernel_text(self_ra) ? 16 : 24);
 
 	/*
 	 * search the text until finding the non-store instruction or "s{d,w}
@@ -394,7 +380,7 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	 * entries configured through the tracing/set_graph_function interface.
 	 */
 
-	insns = in_kernel_space(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
+	insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
 	trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
 
 	/* Only trace if the calling function expects to */

arch/mips/kernel/head.S

@@ -106,8 +106,8 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	beq		t0, t1, dtb_found
 #endif
 	li		t1, -2
-	beq		a0, t1, dtb_found
 	move		t2, a1
+	beq		a0, t1, dtb_found
 
 	li		t2, 0
 dtb_found:

arch/mips/kernel/perf_event_mipsxx.c

@@ -1597,7 +1597,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
 		break;
 	case CPU_P5600:
 	case CPU_P6600:
-	case CPU_I6400:
 		/* 8-bit event numbers */
 		raw_id = config & 0x1ff;
 		base_id = raw_id & 0xff;
@@ -1610,6 +1609,11 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
 		raw_event.range = P;
 #endif
 		break;
+	case CPU_I6400:
+		/* 8-bit event numbers */
+		base_id = config & 0xff;
+		raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		break;
 	case CPU_1004K:
 		if (IS_BOTH_COUNTERS_1004K_EVENT(base_id))
 			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;

arch/mips/kernel/pm-cps.c

@@ -56,7 +56,6 @@ DECLARE_BITMAP(state_support, CPS_PM_STATE_COUNT);
  * state. Actually per-core rather than per-CPU.
  */
 static DEFINE_PER_CPU_ALIGNED(u32*, ready_count);
-static DEFINE_PER_CPU_ALIGNED(void*, ready_count_alloc);
 
 /* Indicates online CPUs coupled with the current CPU */
 static DEFINE_PER_CPU_ALIGNED(cpumask_t, online_coupled);
@@ -642,7 +641,6 @@ static int cps_pm_online_cpu(unsigned int cpu)
 {
 	enum cps_pm_state state;
 	unsigned core = cpu_data[cpu].core;
-	unsigned dlinesz = cpu_data[cpu].dcache.linesz;
 	void *entry_fn, *core_rc;
 
 	for (state = CPS_PM_NC_WAIT; state < CPS_PM_STATE_COUNT; state++) {
@@ -662,16 +660,11 @@ static int cps_pm_online_cpu(unsigned int cpu)
 	}
 
 	if (!per_cpu(ready_count, core)) {
-		core_rc = kmalloc(dlinesz * 2, GFP_KERNEL);
+		core_rc = kmalloc(sizeof(u32), GFP_KERNEL);
 		if (!core_rc) {
 			pr_err("Failed allocate core %u ready_count\n", core);
 			return -ENOMEM;
 		}
-		per_cpu(ready_count_alloc, core) = core_rc;
-
-		/* Ensure ready_count is aligned to a cacheline boundary */
-		core_rc += dlinesz - 1;
-		core_rc = (void *)((unsigned long)core_rc & ~(dlinesz - 1));
 		per_cpu(ready_count, core) = core_rc;
 	}
 

arch/mips/kernel/process.c

@@ -120,7 +120,6 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs, *regs = current_pt_regs();
 	unsigned long childksp;
-	p->set_child_tid = p->clear_child_tid = NULL;
 
 	childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
 

arch/mips/kernel/traps.c

@@ -201,6 +201,8 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 {
 	struct pt_regs regs;
 	mm_segment_t old_fs = get_fs();
+
+	regs.cp0_status = KSU_KERNEL;
 	if (sp) {
 		regs.regs[29] = (unsigned long)sp;
 		regs.regs[31] = 0;

arch/mips/kvm/tlb.c

@@ -166,7 +166,11 @@ static int _kvm_mips_host_tlb_inv(unsigned long entryhi)
 int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long va,
 			  bool user, bool kernel)
 {
-	int idx_user, idx_kernel;
+	/*
+	 * Initialize idx_user and idx_kernel to workaround bogus
+	 * maybe-initialized warning when using GCC 6.
+	 */
+	int idx_user = 0, idx_kernel = 0;
 	unsigned long flags, old_entryhi;
 
 	local_irq_save(flags);

arch/mips/math-emu/dp_maddf.c

@@ -54,7 +54,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 		return ieee754dp_nanxcpt(z);
 	case IEEE754_CLASS_DNORM:
 		DPDNORMZ;
-	/* QNAN is handled separately below */
+	/* QNAN and ZERO cases are handled separately below */
 	}
 
 	switch (CLPAIR(xc, yc)) {
@@ -210,6 +210,9 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 	}
 	assert(rm & (DP_HIDDEN_BIT << 3));
 
+	if (zc == IEEE754_CLASS_ZERO)
+		return ieee754dp_format(rs, re, rm);
+
 	/* And now the addition */
 	assert(zm & DP_HIDDEN_BIT);
 

arch/mips/math-emu/sp_maddf.c

@@ -54,7 +54,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
 		return ieee754sp_nanxcpt(z);
 	case IEEE754_CLASS_DNORM:
 		SPDNORMZ;
-	/* QNAN is handled separately below */
+	/* QNAN and ZERO cases are handled separately below */
 	}
 
 	switch (CLPAIR(xc, yc)) {
@@ -203,6 +203,9 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
 	}
 	assert(rm & (SP_HIDDEN_BIT << 3));
 
+	if (zc == IEEE754_CLASS_ZERO)
+		return ieee754sp_format(rs, re, rm);
+
 	/* And now the addition */
 
 	assert(zm & SP_HIDDEN_BIT);

arch/mips/mm/dma-default.c

@@ -68,12 +68,25 @@ static inline struct page *dma_addr_to_page(struct device *dev,
  * systems and only the R10000 and R12000 are used in such systems, the
  * SGI IP28 Indigo² rsp. SGI IP32 aka O2.
  */
-static inline int cpu_needs_post_dma_flush(struct device *dev)
+static inline bool cpu_needs_post_dma_flush(struct device *dev)
 {
-	return !plat_device_is_coherent(dev) &&
-	       (boot_cpu_type() == CPU_R10000 ||
-		boot_cpu_type() == CPU_R12000 ||
-		boot_cpu_type() == CPU_BMIPS5000);
+	if (plat_device_is_coherent(dev))
+		return false;
+
+	switch (boot_cpu_type()) {
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_BMIPS5000:
+		return true;
+
+	default:
+		/*
+		 * Presence of MAARs suggests that the CPU supports
+		 * speculatively prefetching data, and therefore requires
+		 * the post-DMA flush/invalidate.
+		 */
+		return cpu_has_maar;
+	}
 }
 
 static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)

arch/mips/mm/mmap.c

@@ -93,7 +93,7 @@ static unsigned long arch_get_unmapped_area_common(struct file *filp,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/mips/mm/pgtable-32.c

@@ -51,15 +51,15 @@ void __init pagetable_init(void)
 	/*
 	 * Fixed mappings:
 	 */
-	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
-	fixrange_init(vaddr, vaddr + FIXADDR_SIZE, pgd_base);
+	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1);
+	fixrange_init(vaddr & PMD_MASK, vaddr + FIXADDR_SIZE, pgd_base);
 
 #ifdef CONFIG_HIGHMEM
 	/*
 	 * Permanent kmaps:
 	 */
 	vaddr = PKMAP_BASE;
-	fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
+	fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
 
 	pgd = swapper_pg_dir + __pgd_offset(vaddr);
 	pud = pud_offset(pgd, vaddr);

arch/mn10300/include/asm/processor.h

@@ -132,11 +132,6 @@ static inline void start_thread(struct pt_regs *regs,
 /* Free all resources held by a thread. */
 extern void release_thread(struct task_struct *);
 
-/*
- * Return saved PC of a blocked thread.
- */
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
 unsigned long get_wchan(struct task_struct *p);
 
 #define task_pt_regs(task) ((task)->thread.uregs)

arch/mn10300/kernel/process.c

@@ -39,14 +39,6 @@
 #include <asm/gdb-stub.h>
 #include "internal.h"
 
-/*
- * return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	return ((unsigned long *) tsk->thread.sp)[3];
-}
-
 /*
  * power off function, if any
  */

arch/nios2/include/asm/processor.h

@@ -75,9 +75,6 @@ static inline void release_thread(struct task_struct *dead_task)
 {
 }
 
-/* Return saved PC of a blocked thread. */
-#define thread_saved_pc(tsk)	((tsk)->thread.kregs->ea)
-
 extern unsigned long get_wchan(struct task_struct *p);
 
 #define task_pt_regs(p) \

arch/openrisc/include/asm/processor.h

@@ -84,11 +84,6 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
 void release_thread(struct task_struct *);
 unsigned long get_wchan(struct task_struct *p);
 
-/*
- * Return saved PC of a blocked thread. For now, this is the "user" PC
- */
-extern unsigned long thread_saved_pc(struct task_struct *t);
-
 #define init_stack      (init_thread_union.stack)
 
 #define cpu_relax()     barrier()

arch/openrisc/kernel/process.c

@@ -110,11 +110,6 @@ void show_regs(struct pt_regs *regs)
 	show_registers(regs);
 }
 
-unsigned long thread_saved_pc(struct task_struct *t)
-{
-	return (unsigned long)user_regs(t->stack)->pc;
-}
-
 void release_thread(struct task_struct *dead_task)
 {
 }
@@ -167,8 +162,6 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
 
 	top_of_kernel_stack = sp;
 
-	p->set_child_tid = p->clear_child_tid = NULL;
-
 	/* Locate userspace context on stack... */
 	sp -= STACK_FRAME_OVERHEAD;	/* redzone */
 	sp -= sizeof(struct pt_regs);

arch/parisc/include/asm/processor.h

@@ -163,12 +163,7 @@ struct thread_struct {
 	.flags		= 0 \
 	}
 
-/*
- * Return saved PC of a blocked thread.  This is used by ps mostly.
- */
-
 struct task_struct;
-unsigned long thread_saved_pc(struct task_struct *t);
 void show_trace(struct task_struct *task, unsigned long *stack);
 
 /*