clk: ti: Convert to clk_hw based provider APIs

We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

drivers/clk/ti/autoidle.c

@@ -169,21 +169,21 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
 
 /**
  * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @clk: struct clk * to initialize
+ * @hw: struct clk_hw * to initialize
  *
  * Add an OMAP clock @clk to the internal list of OMAP clocks.  Used
  * temporarily for autoidle handling, until this support can be
  * integrated into the common clock framework code in some way.  No
  * return value.
  */
-void omap2_init_clk_hw_omap_clocks(struct clk *clk)
+void omap2_init_clk_hw_omap_clocks(struct clk_hw *hw)
 {
 	struct clk_hw_omap *c;
 
-	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+	if (clk_hw_get_flags(hw) & CLK_IS_BASIC)
 		return;
 
-	c = to_clk_hw_omap(__clk_get_hw(clk));
+	c = to_clk_hw_omap(hw);
 	list_add(&c->node, &clk_hw_omap_clocks);
 }
 

drivers/clk/ti/clkt_dpll.c

@@ -16,6 +16,7 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/clk/ti.h>
@@ -75,7 +76,7 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
 	dd = clk->dpll_data;
 
 	/* DPLL divider must result in a valid jitter correction val */
-	fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
+	fint = clk_hw_get_rate(clk_hw_get_parent(&clk->hw)) / n;
 
 	if (dd->flags & DPLL_J_TYPE) {
 		fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
@@ -253,7 +254,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 	v >>= __ffs(dd->enable_mask);
 
 	if (_omap2_dpll_is_in_bypass(v))
-		return __clk_get_rate(dd->clk_bypass);
+		return clk_get_rate(dd->clk_bypass);
 
 	v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
 	dpll_mult = v & dd->mult_mask;
@@ -261,7 +262,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
+	dpll_clk = (long long)clk_get_rate(dd->clk_ref) * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -300,8 +301,8 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 
 	dd = clk->dpll_data;
 
-	ref_rate = __clk_get_rate(dd->clk_ref);
-	clk_name = __clk_get_name(hw->clk);
+	ref_rate = clk_get_rate(dd->clk_ref);
+	clk_name = clk_hw_get_name(hw);
 	pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
 		 clk_name, target_rate);
 

drivers/clk/ti/clock.h

@@ -204,7 +204,7 @@ int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 		      ti_of_clk_init_cb_t func);
 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
 
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+void omap2_init_clk_hw_omap_clocks(struct clk_hw *hw);
 int of_ti_clk_autoidle_setup(struct device_node *node);
 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 

drivers/clk/ti/divider.c

@@ -109,7 +109,7 @@ static unsigned long ti_clk_divider_recalc_rate(struct clk_hw *hw,
 	if (!div) {
 		WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
 		     "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
-		     __clk_get_name(hw->clk));
+		     clk_hw_get_name(hw));
 		return parent_rate;
 	}
 
@@ -181,7 +181,7 @@ static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 			*best_parent_rate = parent_rate_saved;
 			return i;
 		}
-		parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
+		parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
 				MULT_ROUND_UP(rate, i));
 		now = DIV_ROUND_UP(parent_rate, i);
 		if (now <= rate && now > best) {
@@ -194,7 +194,7 @@ static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	if (!bestdiv) {
 		bestdiv = _get_maxdiv(divider);
 		*best_parent_rate =
-			__clk_round_rate(__clk_get_parent(hw->clk), 1);
+			clk_hw_round_rate(clk_hw_get_parent(hw), 1);
 	}
 
 	return bestdiv;

drivers/clk/ti/dpll3xxx.c

@@ -69,7 +69,7 @@ static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
 	const char *clk_name;
 
 	dd = clk->dpll_data;
-	clk_name = __clk_get_name(clk->hw.clk);
+	clk_name = clk_hw_get_name(&clk->hw);
 
 	state <<= __ffs(dd->idlest_mask);
 
@@ -98,7 +98,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
+	fint = clk_get_rate(clk->dpll_data->clk_ref) / n;
 
 	pr_debug("clock: fint is %lu\n", fint);
 
@@ -145,7 +145,7 @@ static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
 	u8 state = 1;
 	int r = 0;
 
-	pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
+	pr_debug("clock: locking DPLL %s\n", clk_hw_get_name(&clk->hw));
 
 	dd = clk->dpll_data;
 	state <<= __ffs(dd->idlest_mask);
@@ -193,7 +193,7 @@ static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
 		return -EINVAL;
 
 	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 __clk_get_name(clk->hw.clk));
+		 clk_hw_get_name(&clk->hw));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -223,7 +223,7 @@ static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
 	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
 		return -EINVAL;
 
-	pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
+	pr_debug("clock: stopping DPLL %s\n", clk_hw_get_name(&clk->hw));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -251,7 +251,7 @@ static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
 {
 	unsigned long fint, clkinp; /* watch out for overflow */
 
-	clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+	clkinp = clk_hw_get_rate(clk_hw_get_parent(&clk->hw));
 	fint = (clkinp / n) * m;
 
 	if (fint < 1000000000)
@@ -277,7 +277,7 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
 	unsigned long clkinp, sd; /* watch out for overflow */
 	int mod1, mod2;
 
-	clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+	clkinp = clk_hw_get_rate(clk_hw_get_parent(&clk->hw));
 
 	/*
 	 * target sigma-delta to near 250MHz
@@ -429,15 +429,15 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw)
 		if (r) {
 			WARN(1,
 			     "%s: could not enable %s's clockdomain %s: %d\n",
-			     __func__, __clk_get_name(hw->clk),
+			     __func__, clk_hw_get_name(hw),
 			     clk->clkdm_name, r);
 			return r;
 		}
 	}
 
-	parent = __clk_get_hw(__clk_get_parent(hw->clk));
+	parent = clk_hw_get_parent(hw);
 
-	if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
+	if (clk_hw_get_rate(hw) == clk_get_rate(dd->clk_bypass)) {
 		WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
 		r = _omap3_noncore_dpll_bypass(clk);
 	} else {
@@ -489,7 +489,7 @@ int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
 	if (!dd)
 		return -EINVAL;
 
-	if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+	if (clk_get_rate(dd->clk_bypass) == req->rate &&
 	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
 		req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
 	} else {
@@ -553,8 +553,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!dd)
 		return -EINVAL;
 
-	if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
-	    __clk_get_hw(dd->clk_ref))
+	if (clk_hw_get_parent(hw) != __clk_get_hw(dd->clk_ref))
 		return -EINVAL;
 
 	if (dd->last_rounded_rate == 0)
@@ -567,7 +566,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	}
 
 	pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
-		 __clk_get_name(hw->clk), rate);
+		 clk_hw_get_name(hw), rate);
 
 	ret = omap3_noncore_dpll_program(clk, freqsel);
 
@@ -704,13 +703,11 @@ static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
 {
 	struct clk_hw_omap *pclk = NULL;
-	struct clk *parent;
 
 	/* Walk up the parents of clk, looking for a DPLL */
 	do {
 		do {
-			parent = __clk_get_parent(hw->clk);
-			hw = __clk_get_hw(parent);
+			hw = clk_hw_get_parent(hw);
 		} while (hw && (clk_hw_get_flags(hw) & CLK_IS_BASIC));
 		if (!hw)
 			break;

drivers/clk/ti/dpll44xx.c

@@ -94,7 +94,7 @@ static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
 {
 	long fint, fout;
 
-	fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+	fint = clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
 	fout = fint * dd->last_rounded_m;
 
 	if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
@@ -212,7 +212,7 @@ int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
 	if (!dd)
 		return -EINVAL;
 
-	if (__clk_get_rate(dd->clk_bypass) == req->rate &&
+	if (clk_get_rate(dd->clk_bypass) == req->rate &&
 	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
 		req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
 	} else {

drivers/clk/ti/gate.c

@@ -62,7 +62,7 @@ static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
  * (Any other value different from the Read value) to the
  * corresponding CM_CLKSEL register will refresh the dividers.
  */
-static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *hw)
 {
 	struct clk_divider *parent;
 	struct clk_hw *parent_hw;
@@ -70,10 +70,10 @@ static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 	int ret;
 
 	/* Clear PWRDN bit of HSDIVIDER */
-	ret = omap2_dflt_clk_enable(clk);
+	ret = omap2_dflt_clk_enable(hw);
 
 	/* Parent is the x2 node, get parent of parent for the m2 div */
-	parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
+	parent_hw = clk_hw_get_parent(clk_hw_get_parent(hw));
 	parent = to_clk_divider(parent_hw);
 
 	/* Restore the dividers */